End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
12.5 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of Grade 1 conformity, a ceramic measuring surface and the compact 12.5 mm nominal length for reliable reference checks; order the gauge block directly via Metav Werkzeuge or contact our consultants for application advice. Ceramic gauge block 12.5 mm (Grade 1, DIN 861/1) – Metav IndustryLine The Ceramic gauge block 12.5 mm is a compact length standard for precision reference and inspection tasks in workshops and calibration benches. Grade 1 accuracy to DIN 861/1 Stable, wear-resistant ceramic material Nominal length 12.5 mm reference standard Lightweight design for simple handling Guaranteed conformity for traceable measurements The Grade 1 classification to DIN 861/1 indicates a workshop-oriented tolerance band suitable for routine quality control and inspection. As a short length standard at 12.5 mm, this end measure provides a clear reference point for comparative checks and calibration routines. The conformity to an established standard ensures compatibility with common inspection procedures and simplifies documentation for quality records, supporting efficient and consistent measurement chains. Stable ceramic construction that reduces wear Constructed from ceramic, the block offers a hard, wear-resistant contact surface that keeps its nominal length stable under normal use. The material choice reduces the rate of surface abrasion compared with softer metals, maintaining the reference dimension for longer intervals between checks. This stability translates into fewer replacements and lower lifecycle disruption, which supports productive workshop workflows and dependable inspection outcomes. Small footprint, easy integration into workflows With a nominal length of 12.5 mm and a mass of 0.022 kg (22 g), the block is compact and easily handled during comparative measurements or when building stack sets for gage verification. Its size makes it a practical reference for bench testing, quick inspection routines and for use as part of a set of end measures. The compact format also helps to reduce handling time and to keep storage needs minimal while preserving the reliability required for everyday metrology tasks. Contact Metav Werkzeuge for application guidance on Grade 1 length standards or to request a tailored offer via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M324.012.5 GTIN: 4054469143132 Designation: Ceramic gauge block 12.5 mm, Grade 1 DIN 861/1 Facts Nominal length: 12.5 mm Material: ceramic Weight: 0.022 kg Grade: 1 eClass: 21170108 Customs tariff number: 90173000 Special features Conforms to DIN 861/1 Category: End measures Brand: Metav IndustryLine Compact, lightweight design FAQ What accuracy class does this block meet? The block complies with Grade 1 accuracy according to DIN 861/1, making it suitable for routine inspection and workshop reference tasks. What material is the gauge block made from and why is that beneficial? The gauge block is made from ceramic, which provides a hard, wear-resistant surface that helps preserve the reference length under normal use. What is the nominal length and how is the product identified? The nominal length is 12.5 mm; the product is listed as Ceramic gauge block 12.5 mm, Grade 1 DIN 861/1 (SKU: M324.012.5, GTIN: 4054469143132). Is this block suitable for daily workshop checks? Yes, the compact 12.5 mm design and Grade 1 conformity make the block well suited to routine bench checks and comparative measurements in production and maintenance environments. How heavy is the gauge block and does weight affect handling? The block weighs 0.022 kg (22 g), a light mass that facilitates quick handling and simple integration into inspection routines without cumbersome manipulation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.5 mm Gauge Block, DIN EN ISO 3650 Grade 1, Hardened Special Steel - Metav IndustryLine
Take advantage of a DIN EN ISO 3650 Grade 1 reference that combines material stability and compact handling for dependable inspection and set‑up work; order this calibrated‑capable standard or consult Metav Werkzeuge for application advice. Gauge block 12.5 mm (DIN EN ISO 3650) — Grade 1, hardened special steel by Metav IndustryLine The gauge block 12.5 mm is a precision length reference designed for laboratory and workshop inspection tasks, serving as a reliable standard for calibration, setting, and verification of length measuring instruments. DIN EN ISO 3650 Grade 1 tolerance Hardened special steel construction Compact cross-section: 30x9 / 35x9 mm Traceable reference with GTIN Precision standard that supports repeatable measurement As a compact length standard, this reference block is manufactured to DIN EN ISO 3650 and specified as Grade 1, providing a level of accuracy appropriate for many industrial and workshop inspection tasks. The nominal length of 12.5 mm is produced from hardened special steel, a choice that improves dimensional stability and wear resistance during repeated use. For users seeking consistent set‑up values, the block delivers the objective datum required for comparative checks and routine verification of calipers, micrometres and optical comparators. Robust form for reliable handling and fixture work The product’s reduced mass and defined cross‑section support straightforward handling and fixturing in tight assemblies. With a cross‑section of 30x9 mm up to 10 mm nominal size and 35x9 mm above 10.1 mm, the block retains sufficient stiffness for stable seating while remaining easy to place into gauges or alongside workpieces. At a listed weight of 0.012 kg, the piece is convenient for transport between bench and inspection machine without compromising the surface integrity that a hardened steel construction provides. Practical fit into quality workflows and documentation Supplied with a clear article identity (SKU M319.125.1 and GTIN 4054469131672), the block integrates into inventory and traceability systems with minimal effort. Conformance to the quoted standard simplifies procurement for accredited labs and production quality departments that reference DIN EN ISO 3650 in their quality plans. The simple geometry and standardised size make the block an efficient tool for setting master lengths, performing quick functional checks, and supporting process control measures where a stable, repeatable reference is required. For a DIN‑compliant, hardened reference standard from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to request technical clarification or to place an order through their consultative sales service. Technical Data Article number: M319.125.1 GTIN: 4054469131672 Tariff number: 90173000 Numbers / Core technical data Nominal length: 12.5 mm Weight: 0.012 kg Cross-section: up to 10 mm → 30 x 9 mm; from 10.1 mm → 35 x 9 mm Grade: 1 Special features / Materials Material: Special steel, hardened Standard: DIN EN ISO 3650 Category: End gauges / gauge blocks Brand line: Metav IndustryLine FAQ Is this gauge block suitable for workshop calibration tasks? The gauge block 12.5 mm is intended as a stable reference for workshop and laboratory calibration tasks and is manufactured to DIN EN ISO 3650 Grade 1 to support routine verification work. What material is used and how does that affect longevity? Made from hardened special steel, the block offers enhanced wear resistance and dimensional stability compared with soft materials, making it suitable for repeated use in inspection and set‑up operations. What are the cross‑section dimensions and why do they matter? The block has a compact cross‑section (30 x 9 mm up to 10 mm nominal; 35 x 9 mm from 10.1 mm), which balances stiffness and handling ease, ensuring stable seating during fixture work. How is the product identified for inventory and traceability? The item is listed as SKU M319.125.1 and carries GTIN 4054469131672, enabling straightforward integration into inventory and traceability processes. Can this block be used to check calipers and micrometres? Yes, the 12.5 mm reference is suitable for setting and checking length measuring instruments such as calipers and micrometres where a Grade 1 standard is appropriate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.5 mm Gauge Block, Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a Grade 0 reference standard that meets DIN EN ISO 3650 and is manufactured from hardened special steel to ensure stable, reproducible measurements; order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Gauge block 12.5 mm — Grade 0 reference according to DIN EN ISO 3650 A gauge block 12.5 mm intended as a high‑precision reference for calibration, laboratory use and quality assurance in metalworking and inspection environments. DIN EN ISO 3650 compliant grade 0 Hardened special steel construction Nominal size 12.5 mm reference block Cross-section 35 x 9 mm for enhanced rigidity Traceable accuracy for exact reference measurements The gauge block 12.5 mm serves as a compact reference standard for calibration routines and comparative measurements, built to the DIN EN ISO 3650 specification. As a Grade 0 item, it provides a level of precision expected in professional metrology and quality control, enabling consistent baseline measurements that reduce rework and boost process reliability. The nominal dimension of 12.5 mm makes this block suitable for integration into standard gauge sets or as an individual master for checking micrometres, calipers and comparators. Durable construction to maintain long-term stability Manufactured from hardened special steel, this reference block combines wear resistance with dimensional stability, which preserves accuracy over repeated use. The 35 x 9 mm cross-section (applicable for nominal sizes above 10.1 mm) increases profile stiffness and reduces the influence of handling forces on the measured value, delivering practical benefits in everyday workshop and laboratory conditions. The compact mass and form factor support quick positioning and fast comparison measurements without compromising reproducibility. Practical handling and traceability in quality workflows Lightweight and compact, the block’s small footprint simplifies storage and identification within a calibration set. Relevant identifiers such as SKU M319.125.0 and GTIN 4054469131665 facilitate inventory management and traceability in regulated production environments. As a standardised component, the reference block assists technicians in establishing measurement chains and quality records, which supports efficient auditing and continuous process improvement. For expert advice on how the Metav IndustryLine gauge block can be integrated into existing calibration procedures, contact Metav Werkzeuge for personalised consultancy and reliable supply from Emmerich. Technical data Article number: M319.125.0 GTIN: 4054469131665 SKU: M319.125.0 Nominal size: 12.5 mm Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Weight: 0.011 kg Facts Nominal size: 12.5 mm Weight: 0.011 kg Cross-section (for >10.1 mm): 35 x 9 mm Tariff number: 90173000 Special features Grade 0 accuracy according to DIN EN ISO 3650 Hardened special steel for wear resistance Compact reference block for calibration and verification FAQ What standard does this gauge block comply with? The block is produced to DIN EN ISO 3650, ensuring it meets the specification for end measures at Grade 0. What material is used for the reference block? The reference block is manufactured from hardened special steel, providing long‑term stability and resistance to wear for calibration use. Is the dimension suitable for standard gauge sets? Yes, the 12.5 mm nominal size and its cross-section (35 x 9 mm for sizes above 10.1 mm) make it compatible as a single reference or as part of conventional gauge sets. How is the product identified for inventory and traceability? Identification is possible via SKU M319.125.0 and GTIN 4054469131665, which are commonly used for stock control and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.9 mm Gauge Block For Micrometer Calibration, DIN EN ISO 3650/1 - Metav IndustryLine
Benefit from the combination of DIN EN ISO 3650/1 conformity, special steel construction and the exact 12.9 mm reference dimension for consistent micrometer verification. Order the end gauge directly via Metav Werkzeuge or consult our specialists if application advice is required. End gauge 12.9 mm DIN EN ISO 3650/1 — End measure for micrometer inspection (Metav IndustryLine) The End gauge 12.9 mm DIN EN ISO 3650/1 is a precision end measure designed for verification tasks in metrology and production environments, serving as a reliable reference standard for micrometer checks. DIN EN ISO 3650/1 certified reference standard Special steel for dimensional stability Exact 12.9 mm reference dimension Proven conformity for reproducible verification Compliance with DIN EN ISO 3650/1 gives a clear, technical basis for using this tool as a reference in routine verification procedures. The standard defines the dimensional and manufacturing requirements for end measures, which means the gauge can be integrated into existing quality processes with predictable behaviour. As a result, traceable checks of micrometers become straightforward, supporting quality documentation and internal inspection routines while reducing uncertainty during acceptance testing. Robust construction to maintain accuracy over time Manufactured from special steel, the gauge is built for dimensional stability and wear resistance under normal workshop conditions. The selected material minimises surface degradation and helps maintain the reference dimension through repeated use. The compact design and manageable mass allow safe handling in busy inspection benches and laboratory settings, providing a stable contact surface for micrometer anvils and preserving measurement integrity across numerous checks. Practical benefits for workshop and laboratory workflows As a compact reference with a defined 12.9 mm dimension, the measure is particularly useful for rapid functional checks and comparative inspections of micrometers. It simplifies acceptance routines and speeds up decision-making during incoming inspection or routine maintenance. The clear standard reference reduces interpretation effort for technicians and supports consistent recording of conformance in production logs and inspection reports. Reliability backed by a recognised industrial partner This reference is part of the Metav IndustryLine range and is specified for professional metrology applications where consistency matters. The combination of a standards-based specification and durable material supports a low-maintenance approach to routine verification, helping to keep inspection cycles efficient and reproducible while reinforcing confidence in measurement data. Choose the Metav IndustryLine end gauge for standard-compliant micrometer verification and contact Metav Werkzeuge for tailored delivery and documentation from Emmerich. Technical data Article number: M318.203.4 GTIN: 4054469178424 ECLASS: 21170109 Facts Reference dimension: 12.9 mm Weight: 0.3 kg Customs tariff number: 90173000 Special features Material: special steel Standard: DIN EN ISO 3650/1 Intended use: inspection of micrometers Category: End gauges FAQ What is the primary purpose of this end gauge? The end gauge serves as a precise reference for functional checks and verification of micrometers, providing a known 12.9 mm dimension for comparative inspection. Is the material suitable for repeated contact with micrometer anvils? Yes, the gauge is made from special steel, chosen for dimensional stability and resistance to wear during regular inspection use. Does DIN EN ISO 3650/1 specify tolerances for this gauge? The DIN EN ISO 3650/1 designation indicates manufacture to the standard that defines dimensions and production criteria; the applicable tolerance class follows that norm and supports repeatable verification practice. Can this gauge be used in a calibration laboratory as a reference? The design and standard conformity make it suitable as a reference in verification and calibration workflows; for formal accredited calibration status, laboratory procedures and certificates should be consulted. Which product identifiers help with ordering and traceability? Reference identifiers include the article number M318.203.4 and GTIN 4054469178424, which support stock management and traceability in procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
122 Piece Gauge Block Set 1–30 mm, Hardened Special Steel, DIN EN ISO 3650, Plastic Case - Metav IndustryLine
Take advantage of a complete 122-piece gauge block set that combines broad coverage, enduring material quality and conformity with recognised standards to streamline measurement and setup tasks on the shop floor; order the set directly via Metav Werkzeuge or consult our advisors for technical matching. M318.122.1 Parallel gauge block set — 122-piece, hardened special steel (DIN EN ISO 3650) | Metav IndustryLine A Parallel gauge block set M318.122.1 designed for precision length setting and inspection across workshop, toolroom and quality-control applications. 122-piece set for comprehensive coverage Hardened special steel for long-term stability Conforms to DIN EN ISO 3650 standard Includes fine increments from 0.5 to 100 mm Precision where measurable quality counts The set delivers predictable accuracy through a carefully graded composition of blocks that support repeatable stack-ups and fine adjustments during setup. Manufactured from hardened special steel, the components resist wear and preserve contact geometry, which keeps dimensional deviations low during routine use. Conformity with DIN EN ISO 3650 ensures that the blocks meet established tolerances for end-measure geometry, providing a verifiable basis for calibration and inspection tasks and reducing uncertainty in measurement chains. A coverage profile built for practical efficiency With a 122-piece composition spanning fine increments up to 0.5–100 mm, the collection minimises the need for multiple tool changes and enables rapid attainment of target lengths. The mix of small steps and larger sizes allows concise selection for both delicate set-up work and broader spacing tasks, cutting preparation time and improving throughput. This practical range suits general metalworking, fixture setting and precise component alignment where efficient, accurate gauge combinations make processes faster and less error-prone. Robust construction for consistent performance The use of hardened special steel delivers both dimensional stability and resistance to surface damage under normal workshop conditions. Heat treatment and finishing maintain flatness and parallelism so that measurements remain reliable over repeated cycles. As a result, the set supports stable datum generation and keeps maintenance intervals predictable, which contributes to lower lifecycle costs and fewer interruptions in production flow. Designed to support quality management and inspection The composition and standard compliance of the set make it suitable as a trusted reference tool within routine quality-control workflows. Blocks from this collection facilitate quick comparative checks, fixture verification and setting of measuring instruments. When integrated into documented inspection procedures, the set helps to strengthen traceability and process reliability by providing verified reference lengths that align with industry standards. For specification advice or to request a formal quote for the Metav IndustryLine parallel gauge block set M318.122.1, contact Metav Werkzeuge in Emmerich for tailored guidance and assured delivery to your workshop. Technical data Article number: M318.122.1 GTIN: 4054469127934 Tariff number: 90173000 Items per set: 122 Weight: 5.2 kg Material: hardened special steel Standard: DIN EN ISO 3650 Facts Pieces per set: 122 Weight: 5.2 kg GTIN: 4054469127934 Tariff number: 90173000 Special features Hardened special steel Conforms to DIN EN ISO 3650 Increment range: 0.5–100 mm Supplied as a complete set FAQ What does the 122-piece set include? The set comprises 122 individual gauge blocks arranged to offer a stepped selection from fine to larger increments, supplied under SKU M318.122.1 and intended to cover typical workshop and toolroom measurement needs. Is the material suitable for regular shop use? Yes — the blocks are made from hardened special steel, which provides wear resistance and dimensional stability for everyday inspection and setting tasks. Which standard governs the geometrical tolerances? Geometrical tolerances and manufacturing quality follow DIN EN ISO 3650, ensuring that the blocks meet established requirements for precision end-measure components. Can the blocks be used for fixture and gauge set-up? Absolutely; the set is designed for quick and repeatable stack-ups, fixture alignment and setting of comparative gauges, enhancing setup efficiency and measurement repeatability. How should the blocks be handled to preserve accuracy? Handle blocks by their edges, keep contact faces clean and free from contaminants, and store them dry to avoid corrosion and surface damage that could affect measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
122 Pieces Gauge Block Set 1.0005–30 mm, Hardened Special Steel, DIN EN ISO 3650, Supplied in Case - Metav IndustryLine
Take advantage of a comprehensive length-reference solution that combines DIN EN ISO 3650 conformity, hardened special steel construction and a full complement of gauge sizes for reproducible measurements; order the Parallel gauge block set 122/0 directly via Metav Werkzeuge or ask our consultants if needed. Parallel gauge block set 122/0 — Hardened special steel, DIN EN ISO 3650 (Metav IndustryLine) A Parallel gauge block set 122/0 designed as a stable length-reference kit for workshop metrology and calibration tasks across toolrooms and quality control departments. 122-piece gauge block set Hardened special steel construction Conforms to DIN EN ISO 3650 Supplied in protective transport case Repeatable length standards for reliable measurement The set is engineered to provide a stable reference across a wide range of lengths, offering precision for setting and checking micrometres, calipers and measuring fixtures. Manufactured from hardened special steel and produced to DIN EN ISO 3650, the components give consistent contact surfaces and dimensional stability under normal workshop conditions. The format supports stacking and combination of blocks to create exact target lengths without complex workarounds, reducing setup time and measurement scatter. Practical handling that suits busy workshops The blocks are organised to speed up selection and stacking while remaining easy to clean and inspect. Supplied in a protective transport case, the set keeps components secure during storage and transit; individual blocks are clearly identifiable to reduce retrieval time. The robust case and set layout support both bench-top use and mobile calibration tasks, ensuring the set is practical for routine production checks as well as occasional laboratory comparisons. Suitable for workshop calibration and quality assurance As a full set of end gauges, this kit is intended for applications in workshop metrology, toolmaking and incoming inspection where a traceable length reference is required. The combination of standard compliance and a comprehensive size range ensures that the set is a versatile tool for establishing gauge stacks, verifying measuring instruments and supporting first-article inspection processes. The supply chain benefit from Metav’s European distribution adds predictable availability and logistic reliability for ongoing quality routines. For specification advice or to arrange delivery of the Parallel gauge block set 122/0 from Metav IndustryLine, contact Metav Werkzeuge to confirm contents and compatibility with existing calibration procedures Technical data SKU: M318.122.0 GTIN: 4054469127927 Weight: 5.2 kg Pieces per set: 122 Material: Hardened special steel Standard: DIN EN ISO 3650 Facts Contents (sizes): 1 x 1.0005 mm 9 x 1.001–1.009 mm 49 x 1.01–1.49 mm 4 x 1.6–1.9 mm 49 x 0.5–24.5 mm 8 x 30–100 mm 2 x 25.75 mm Special features Supplied in transport case Set format for workshop and calibration use Conforms to DIN EN ISO 3650 Category: Gauge blocks / end gauges FAQ What is included in the set? The set includes 122 precision gauge blocks in a range of sizes as listed under Contents (sizes) and is supplied in a protective transport case. Is the set suitable for calibration work? Yes, the Parallel gauge block set 122/0 is manufactured to DIN EN ISO 3650 and is suitable as a reference for workshop-level calibration and verification tasks. What material are the blocks made from? The blocks are made of hardened special steel, chosen for dimensional stability and wear resistance in routine metrology use. Can the blocks be combined to achieve specific lengths? Yes, the blocks are designed for stacking to form exact target lengths for setting instruments and checking gauges. Which industries commonly use this type of set? Toolmaking, production engineering, inspection departments and quality control laboratories commonly use gauge block sets for instrument setting and verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
122 Pieces Gauge Block Set 1–1000 µm Hardened Special Steel DIN EN ISO 3650, In Case - Metav IndustryLine
Benefit from a hardened special-steel construction, conformity to DIN EN ISO 3650 and a comprehensive 122-piece layout for dependable shop and laboratory measurements; order directly via Metav Werkzeuge or contact our consultants for further assistance. Parallel gauge block set M318.122.2 — 122-piece hardened special-steel set, DIN EN ISO 3650 (Metav IndustryLine) A Parallel gauge block set M318.122.2 designed for precision dimensioning and calibration tasks in metrology and industrial workshop environments 122-piece hardened gauge block set Conforms to DIN EN ISO 3650 Supplied in a protective transport case Reliable accuracy through durable construction The set is manufactured from hardened special steel, chosen for wear resistance and long-term dimensional stability; this material ensures the gauge blocks keep their reference dimensions under regular use and reduce the need for frequent rework. Conformity to DIN EN ISO 3650 provides an established quality baseline for calibration and inspection routines, which supports reproducible results across shifts and operators. The robust construction therefore translates directly into less downtime and more consistent measurement data for production control. Broad coverage to simplify workshop processes A 122-piece arrangement supplies a wide selection of nominal lengths so that common combinations are available without constant block stacking; this reduces set-up time and improves throughput in inspection and assembly tasks. The variety of individual sizes within the set allows efficient generation of target lengths and minimises reliance on additional measurement tooling. For everyday metrology tasks in machine shops and quality departments, using a complete block set streamlines comparative measurements and speeds up verification steps. Practical handling and safe storage for daily use Delivery in a dedicated protective transport case keeps the blocks organised and shielded from contamination and mechanical damage during transport between bench and inspection area. The set’s balanced mass supports stable handling while the finished faces of the blocks are engineered for easy wringing and repeatable contact. Together, these attributes support quick measurement cycles and lower the risk of handling-related errors, which is crucial when the same set is used across multiple workstations or by several technicians. Choose the Metav IndustryLine parallel gauge block set for reliable workshop calibration and contact Metav Werkzeuge for ordering or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.122.2 GTIN: 4054469127941 Category: End gauges / Endmasse Core data Pieces per set: 122 Weight: 5.2 kg Standard: DIN EN ISO 3650 Materials & features Material: Special steel, hardened Delivery: Supplied in protective transport case Set type: Parallel gauge blocks (end gauges) Conforms also to: DIN 861/2 FAQ What is included in the set? The set contains 122 parallel gauge blocks in a range of nominal sizes supplied in a protective transport case; the Parallel gauge block set M318.122.2 is arranged to cover common workshop combinations. Is the material suitable for regular workshop use? Yes, the blocks are made from hardened special steel, which provides wear resistance and dimensional stability for routine metrology and inspection tasks. Can this set be used for calibration reference in a quality lab? The set’s conformity to DIN EN ISO 3650 makes the blocks suitable as reference aids in laboratory calibration and verification procedures when used within appropriate calibration and handling regimes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125 mm Gauge Block Grade 0, DIN EN ISO 3650, Hardened Special Steel, 35x9 mm - Metav IndustryLine
Take advantage of a traceable Grade 0 reference block with robust special steel construction and a stable 35 x 9 mm cross-section for consistently reproducible length setting and inspection tasks; order the gauge block directly via Metav Werkzeuge or consult our specialists if further clarification is required. End gauge 125 mm (M320.125.0) — Gauge block, Grade 0, DIN EN ISO 3650, Metav IndustryLine A 125 mm gauge block (M320.125.0) engineered as a high‑precision length reference for workshop and laboratory inspection tasks, complying with the DIN EN ISO 3650 standard. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Cross-section 35 x 9 mm for enhanced stability Nominal length 125 mm for widespread calibration use Dependable reference for routine and accredited checks The gauge block offers a consistent reference length of 125 mm, suitable for both routine shop-floor checks and integration into formal measurement procedures. Manufactured from special steel, hardened, the bar resists superficial deformation and maintains form under typical handling, which leads to fewer re-measurements and higher process uptime. Compliance with DIN EN ISO 3650 and the designation Grade 0 indicate a level of geometric tolerance that supports reliable comparison measurements and length setting on comparators and optical benches. Stability and handling that reduce measurement uncertainty With a compact cross-section of 35 x 9 mm and a mass of 0.4 kg, the block balances rigidity with manageable handling. The chosen profile reduces bending and thermal drift during short inspection cycles, contributing to reproducible results across repeated measurements. The hardened surface reduces wear from frequent wringing or stacking with other blocks, extending the usable lifetime and sustaining the declared accuracy over time. Clear standardisation for traceability and process control Engineered to meet DIN EN ISO 3650, this precision block supports traceable workflows and quality assurance routines where standard conformity is required. The Grade 0 classification places the block within a narrow tolerance band, making it suitable as a reference piece for setting gauges, calibrating instruments and verifying fixtures. The simple, well-documented specification also simplifies inclusion in internal quality records and measurement uncertainty calculations. Practical integration into inspection benches and sets The 125 mm length is a practical choice for workshop and laboratory sets, bridging smaller reference blocks and longer standards to cover a broad measurement range without unnecessary inventory complexity. The special steel, hardened construction allows safe pairing with other hardened blocks and accessories while reducing the risk of transfer wear. Where rapid, repeatable alignment is required, the block’s dimensions and finish permit efficient wringing and stacking with complementary gauges. Choose Metav IndustryLine’s M320.125.0 when Grade 0 traceability and durable, hardened construction are central to measurement certainty — contact Metav Werkzeuge for ordering and expert advice. Technical data Article number: M320.125.0 GTIN: 4054469132365 Nominal length: 125 mm Standard: DIN EN ISO 3650 Grade: 0 Material: Special steel, hardened Cross-section: 35 x 9 mm Weight: 0.4 kg TARIC code: 90173000 Facts Nominal length: 125 mm Cross-section: 35 x 9 mm Weight: 0.4 kg GTIN: 4054469132365 TARIC: 90173000 Special features Compliance: DIN EN ISO 3650 Grade 0 Construction: Special steel, hardened for wear resistance Profile: 35 x 9 mm for increased stiffness and stability Application: Reference length for calibration and inspection FAQ What accuracy class does this gauge block conform to? The block is specified as Grade 0 according to DIN EN ISO 3650, providing a narrow tolerance suited for precise reference tasks. Which material is used and what are the benefits for measurement tasks? Manufactured from special steel, hardened, the M320.125.0 offers enhanced surface hardness and wear resistance, which preserves dimensional stability during frequent use. Is the 125 mm length suitable for workshop calibration sets? Yes, the 125 mm nominal length fits well between smaller reference blocks and longer standards, making it a versatile element in calibration kits and inspection benches. How does the cross-section influence measurement reliability? The 35 x 9 mm profile increases rigidity and reduces bending, which lowers measurement uncertainty during short-term checks and repeated handling. Can this block be used together with other hardened blocks? The hardened finish and standard geometry make the block compatible for wringing and stacking with other hardened gauge blocks in Grade‑compatible sets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125 mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, robust hardened special steel and compact dimensions for a reliable workshop reference standard; order directly via Metav Werkzeuge or consult our specialists for application advice. End measure 125 mm, DIN EN ISO 3650, Grade 1 — End gauge for workshop and calibration use The End measure 125 mm, Grade 1 provides a compact, traceable reference for dimension checks and short-range calibration tasks in industrial metrology and quality control. Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel for wear resistance Compact 125 mm nominal length Stable 35×9 mm cross-section High-precision reference for routine checks The gauge is manufactured to DIN EN ISO 3650 and specified as Grade 1, providing a reliable reference for short-range dimensional checks in production and inspection. Made from hardened special steel, the component resists wear and preserves the measuring face over repeated use; this stability reduces the frequency of reconditioning and supports consistent results in workshop environments. The construction balances stiffness and mass so that the 125 mm nominal length functions as a trustworthy short-range standard for gauges and small assemblies. Designed for durable, reproducible handling A compact cross-section of 35×9 mm gives the standard a low profile that is easy to handle while maintaining sufficient rigidity for repeatable contact measurements. The hardened surfaces provide abrasion resistance and help sustain the specified tolerance band associated with Grade 1 items. The moderate weight (approx. 0.4 kg) contributes to a secure feel in hand and minimises accidental movement during comparative and direct-contact checks, supporting efficient task flow on the shop floor. Practical integration into inspection routines The product is suited for workshop calibration benches, toolroom verification and as a periodic reference for handheld measuring instruments. Identification via SKU M320.125.1 and GTIN 4054469132372 facilitates inventory control and traceability within a quality management system. Supplied as a single standard, it fits into existing measurement sets or can be used as a standalone reference for quick acceptance testing and routine dimensional verification processes. Care, storage and longevity To preserve the measuring faces, clean and store the gauge in a dry environment and protect it from impacts and corrosive agents. The hardened special steel construction reduces routine wear, but regular visual checks and gentle cleaning after use extend service life. When incorporated into an organised inspection regime, the item delivers dependable repeatability and contributes to reduced measurement uncertainty across frequent short-range checks. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for technical guidance and ordering options tailored to production or calibration needs Technical data SKU: M320.125.1 GTIN: 4054469132372 Article category: End measures Facts Nominal length: 125 mm Cross-section: 35×9 mm Weight: 0.4 kg Tariff code: 90173000 Versions / Special features Material: hardened special steel Conforms to DIN EN ISO 3650, Grade 1 Suitable as workshop reference and short-range standard Manufacturer range: Metav IndustryLine FAQ What tolerance class does this end measure meet? The end measure meets Grade 1 according to DIN EN ISO 3650, indicating suitability for precise workshop reference and short-range verification tasks. Is the material suited to repeated contact measurements? Yes, the item is made from hardened special steel, designed to resist wear during repeated contact measurements and to maintain dimensional stability. Can this gauge be used as a calibration standard? The 125 mm end measure serves as a reliable short-range reference for calibration benches and workshop checks; for formal accredited calibration services, the item can be integrated into a laboratory procedure as a reference artefact. How is the product identified for inventory and traceability? Identification is provided by SKU M320.125.1 and GTIN 4054469132372, which support stock control and traceability within quality management systems. What handling and storage precautions are recommended? Handle the gauge with clean hands or gloves, avoid impacts, and store it in a dry, protected environment to preserve the hardened measuring faces and ensure long-term repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125/150/175/200/250/300/400/500mm Gauge Block Set Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of proven Grade 1 precision and hardened construction for repeatable setup and alignment tasks; order directly via Metav Werkzeuge or request advice from our consultants to ensure seamless integration into the workshop workflow. Parallels set M318.081 — 8-piece Grade 1 parallels 125–500 mm (Metav IndustryLine) The Parallels set M318.081 is a precision alignment and support set intended for setup, inspection and fixturing tasks in machine shops and quality departments, offering a durable workshop solution for repeatable component positioning. Grade 1 accuracy to DIN EN ISO 3650 Hardened special-steel construction Eight sizes from 125 to 500 mm Set weight approx. 7 kg Consistent precision for reliable setups The eight-piece set delivers Grade 1 performance under DIN EN ISO 3650, which translates into measurable and reproducible results when aligning vices, fixtures or workpieces. The specified standard bounds the manufacturing tolerances and ensures that each block contributes to overall accuracy and repeatability during serial setups. For users requiring predictable results in production or inspection, these parallels reduce adjustment time and limit rework by providing a stable reference surface that keeps components square and true. Built to withstand workshop demands Manufactured from hardened special steel, the parallels combine rigidity with wear resistance to maintain form under repeated clamping and contact stresses. The material choice and heat treatment reduce surface deformation and prolong service life, so fewer replacements and maintenance interventions are needed. With sizes spanning 125–500 mm, the set covers a broad range of component sizes while remaining manageable in handling and storage, supporting efficient changeovers and quicker fixture assembly in daily operations. Practical advantages that speed up work Using parallels simplifies common tasks such as setting workpiece heights, creating parallel supports for milling and grinding, or establishing precise spacings during assembly. The compact range of lengths enables flexible fixturing without overcomplicating setup routines, helping machinists and inspectors to work faster with fewer measurement checks. Backed by Metav’s distribution and quality assurance, the set fits both routine workshop duties and demanding inspection tasks, offering a pragmatic balance of stability and usable reach. Choose the Metav IndustryLine parallels set for dependable Grade 1 performance — contact Metav Werkzeuge in Emmerich for tailored advice and supply arrangements Technical data Article number: M318.081 GTIN: 4054469127842 ECLASS: 21179208 Set pieces: 8 Sizes: 125 / 150 / 175 / 200 / 250 / 300 / 400 / 500 mm Measurements & weight Total weight: 7 kg Tolerance grade: 1 Tariff number: 90173000 Materials & standards Material: Special steel, hardened Standard: DIN EN ISO 3650 Set: yes Manufacturer: Metav IndustryLine FAQ What tolerance class do these parallels have? The Parallels set M318.081 is manufactured to Grade 1 tolerances in accordance with DIN EN ISO 3650, ensuring tight and repeatable dimensional control. Which sizes are included in the set? Included are eight lengths: 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm, 400 mm and 500 mm, supplied together as a complete workshop set. What material are the parallels made from? The parallels are made from hardened special steel, selected for dimensional stability and wear resistance under typical machining and fixturing loads. How are these parallels typically used in a workshop? They are intended for alignment, support and spacing tasks such as setting workpiece height, supporting long stock in milling, and creating parallel reference planes during inspection. Who supplies this set and where can further advice be obtained? The item is part of the Metav IndustryLine range; Metav Werkzeuge provides product and application advice from its Emmerich location. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125/150/175/200/250/300/400/500mm Parallel Gauge Set, Grade 0, Hardened Special Steel, DIN EN ISO 3650, Wooden/Plastic Case - Metav IndustryLine
Benefit from Grade 0 accuracy, a robust hardened special steel construction and a complete set of eight sizes for dependable workshop set‑up and inspection work. Order the set directly via Metav Werkzeuge or consult the company’s advisors if further specification is required. Parallel end gauges set M318.080 — Grade 0 precision, hardened special steel A compact set of eight hardened parallel end gauges for precision alignment and inspection in general workshop and machine‑shop applications DIN EN ISO 3650 compliance Grade 0 accuracy for comparison Hardened special steel construction Delivered in protective transport case High‑accuracy face masters for repeatable setups The set serves as a collection of reference parallels engineered for high repeatability in jigs, fixtures and inspection benches. Conforming to DIN EN ISO 3650, the gauges provide Grade 0 tolerances suitable for fine alignment and comparative verification tasks; this delivers a reliable baseline for quality assurance and reduces iterative rework. The construction in hardened special steel ensures dimensional stability under normal workshop conditions and maintains guide parallelism for consistent results. Durable construction tailored to workshop use These blocks are produced from a hardened special steel grade and finished to provide wear resistance and long service life. The robust faces preserve flatness during handling and when used as supports or spacers under load. Supplied in a protective transport case, the set is protected during storage and transit, simplifying on‑site organisation and reducing the risk of accidental damage — a practical benefit for busy production environments. Practical size range and easy integration into workflows The set of eight covers a practical range from 125–500 mm, allowing flexible assembly of support stacks or direct use as datum parallels for medium‑sized components. The eight sizes permit quick composition of required stack heights or supports without resorting to improvised shimming, saving set‑up time and improving process reliability. As precision reference blocks, they integrate easily into calibration benches, inspection routines and machine set‑ups. For procurement and expert specification advice contact Metav Werkzeuge for reliable supply from Emmerich and tailored assistance to match the set to the intended application Technical Data Article number: M318.080 GTIN: 4054469127835 Set contents: 8 pieces Sizes: 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm, 400 mm, 500 mm Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 0 Weight: 7 kg Tariff number: 90173000 Delivered in transport case Facts Sizes (mm): 125, 150, 175, 200, 250, 300, 400, 500 Pieces per set: 8 Weight (kg): 7 GTIN: 4054469127835 Tariff no.: 90173000 Special features Hardened special steel DIN EN ISO 3650 compliance Grade 0 tolerance level Protective transport case for delivery Eight precision parallel end gauges for alignment and inspection FAQ What sizes are included in the set? The set comprises eight parallel end gauges in sizes 125, 150, 175, 200, 250, 300, 400 and 500 mm as supplied with the M318.080 series from Metav IndustryLine. What does Grade 0 signify for these parallels? Grade 0 indicates the high accuracy band for reference parallels under DIN EN ISO 3650; it is intended for reliable comparison and alignment work where tight flatness and dimensional tolerance are required. Are these gauges suitable for general workshop use? Yes — the hardened special steel construction and protective transport case make the set appropriate for routine workshop handling, fixture set‑ups and inspection benches. How are the parallels delivered and protected during transport? The set is supplied in a protective transport case to reduce the risk of damage during transit and storage, ensuring the measurement faces remain in specification on arrival. Can the blocks be used as support parallels in machine set‑up? The parallels serve as stable datum supports and spacing blocks for medium‑sized components, allowing composition of required heights without improvised shimming and improving set‑up repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm End Gauge Connector Anodised, 0.27kg - Metav IndustryLine
Take advantage of the combination of anodised corrosion resistance, secure connection bores and compatibility with end gauges from 125 mm for reliable gauge assemblies; order the end gauge connector directly via Metav Werkzeuge or ask our consultants for specification support. End gauge connector M317.130 — anodised connector for end gauges from 125 mm (Metav IndustryLine) End gauge connector M317.130 is an anodised joining accessory designed to link end gauges from 125 mm upwards, providing stable and corrosion‑resistant connections for gauge stacks and modular measurement fixtures. Anodised surface for corrosion resistance Suitable for end gauges from 125 mm Secure mounting with connection bores Built for durable, repeatable gauge assemblies The anodised finish delivers lasting corrosion resistance, which preserves contact accuracy and reduces maintenance cycles in routine use. As a joining component for standard end gauges from 125 mm, this connector simplifies the assembly of multi‑piece gauges and ensures a consistent mechanical interface between components. The surface treatment also minimises friction and wear at the contact surfaces, supporting reproducible results over time. Secure mechanical connection that supports precision workflows Designed with connection bores to accept fixed fastenings, the connector provides secure mounting that reduces play and misalignment during handling and measurement. This mechanical stability translates directly into fewer setup errors and faster throughput in calibration and inspection tasks. By stabilising the joint between end gauge elements, the accessory helps maintain measurement traceability and supports quality control procedures on the shop floor. Practical integration and workshop benefits The simple geometry and standardised mounting pattern allow straightforward integration into existing gauge sets and fixtures, which reduces engineering time when extending measuring ranges. The anodised joining piece is a low‑complexity solution that contributes to smoother assembly processes, less downtime when reconfiguring gauges, and consistent end results across repetitive operations. Where fixture repeatability matters, this connector supports operational efficiency and reduces potential rework. Contact Metav Werkzeuge in Emmerich for specification advice or to order the M317.130 connector; call +49 2822 7131930 or email info@metav-werkzeuge.com for direct assistance and fast dispatch from our European stock. Technical data Article number: M317.130 GTIN: 4054469127460 EClass: 21170108 Tariff code: 90173000 Brand: Metav IndustryLine Facts Compatible from 125 mm Surface: anodised Category: End gauges Special features Connection bores for fixed mounting Corrosion‑resistant surface treatment Compact joining design for modular gauge stacks FAQ Which gauge sizes can be joined with this connector? The connector supports end gauges from 125 mm and is intended for modular gauge stacks where the joining geometry matches the connection bores. What surface treatment does the part have? The joining piece is anodised, offering improved corrosion resistance and reduced wear at contact points. How does the connector improve measurement stability? By providing secure mounting via connection bores, the connector reduces play at joints and helps maintain alignment between gauge elements, which supports repeatable measurements. Is the M317.130 compatible with standard metric end gauges? Yes, the M317.130 is designed for conventional metric end gauge assemblies and integrates into standard workshop fixtures for inspection and calibration Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm End Gauge Connector Simple With Connection Holes - Metav IndustryLine
Combine carbide durability with compatibility for end gauges from 125 mm to achieve reliable, repeatable connections; the compact 0.3 kg mass supports straightforward handling and fast set-up. Order the (End gauge connector) directly via (Metav Werkzeuge) or ask our consultants if needed. End gauge connector M317.131 — carbide, for end gauges from 125 mm (Metav IndustryLine) A simple end gauge connector designed to join end gauges with a minimum length of 125 mm, providing a secure mechanical coupling for modular gauge chains in inspection and assembly contexts. Carbide construction for long-term wear resistance Compatible with end gauges from 125 mm Lightweight 0.3 kg for easy handling Consistent gauge chains for repeatable measurement The connector is engineered to form stable links in a chain of end gauges, ensuring repeatable positioning across measurement sequences. Made as a simple coupling piece, it removes the variability that arises when ad-hoc adapters are used; the result is a measurable reduction in setup time and fewer alignment checks between operations. The design supports routine metrology in workshop and production environments where traceable, repeatable results are required: the compact form factor and clearly defined interface mean components sit reliably together, giving a dependable mechanical reference for subsequent inspection steps. Durability that reduces downtime and maintenance Constructed from carbide, this connector offers high resistance to abrasive wear and deformation, which translates directly into longer service life and lower life‑cycle costs for inspection fixtures. The robust material choice preserves dimensional stability under frequent coupling and uncoupling, so calibration drift from mechanical wear is minimised. At 0.3 kg, the piece remains easy to handle during assembly or reconfiguration of gauge sets, simplifying logistics for bench technicians and inspectors while maintaining a professional level of precision across many cycles of use. Quick integration into existing inspection setups The straightforward geometry and defined mounting interface make integration into existing gauge assemblies uncomplicated. The component is tailored for end gauges with a minimum length of 125 mm, which covers the most common workshop standards used in machine and tool shops. As a compact, purpose-built connector it reduces the need for improvised fixtures, supporting a cleaner workflow and fewer sources of measurement error. Where operators require clear, reproducible reference points in production metrology, this coupling piece acts as a small but essential part of a controlled measurement chain. Contact Metav Werkzeuge for tailored advice on integrating the carbide connector into gauge chains and to discuss suitable combinations for specific inspection tasks Technical data Article number: M317.131 Label: Endmaßverbinder, einfach für Endmaß ab 125 mm; SKU: M317.131 GTIN: 4054469157733 Manufacturer: Metav IndustryLine Facts Weight: 0.3 kg Minimum compatible end gauge length: 125 mm Tariff number: 90173000 Special features Material: Carbide Type: simple connector for end gauges Application area: modular gauge chains / inspection fixtures FAQ How does the connector attach to end gauges? The connector provides a defined mechanical interface for end gauges from 125 mm, enabling secure coupling and stable positioning within a gauge chain. Is the component suitable for frequent use in production? Yes; the carbide construction of the connector is intended for high wear resistance and durability, making it appropriate for repeated use in production inspection routines. Which end gauge sizes are compatible with this connector? The connector is designed for end gauges with a minimum length of 125 mm, matching common workshop gauge standards for modular measurement setups. What is the weight of the connector and how does that affect handling? At 0.3 kg the connector is lightweight, which facilitates manual handling and rapid reconfiguration of gauge chains without compromising mechanical stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13 mm Gauge Block End Standard Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a hardened special steel construction and DIN EN ISO 3650 conformity to secure reliable, repeatable reference measurements; the compact 13 mm nominal size plus a robust cross‑section ensure long service life and stable handling. Order the end gauge directly via Metav Werkzeuge or ask our consultants if needed. End gauge 13 mm (Grade 1) — hardened special steel by Metav IndustryLine The End gauge 13 mm is a hardened, DIN EN ISO 3650‑compliant reference gauge designed for precision inspection and calibration tasks in metrology laboratories and production control. *High‑accuracy grade 1 calibration standard *Hardened special steel construction *DIN EN ISO 3650 compliant *Compact, lightweight reference gauge Ensure repeatable, traceable measurements for inspection and QA The Grade 1 classification under DIN EN ISO 3650 guarantees that this reference meets strict tolerances for use as a comparison standard in quality control. With a nominal size of 13 mm, the gauge serves as a stable datum for go/no‑go checking, machine set‑up verification and dimensional referencing. The clear standard compliance supports documented inspection procedures and streamlines acceptance criteria, helping to reduce rework and ensure parts meet specification. Durable build that keeps inspection routines running Constructed from hardened special steel, this gauge resists wear and preserves its measuring face under frequent use. The specified cross‑section for this nominal range is 35 x 9 mm, providing a stiff profile that limits bending and maintains alignment during repetitive handling. At just 0.012 kg the component is easy to position while still offering the rigidity required for reproducible results; longevity and reduced replacement intervals translate into lower process interruptions. Simple integration into production and calibration workflows As a compact reference, the 13 mm unit fits easily into inspection jigs, gauge blocks stacks or bespoke fixtures and acts as a fast verification tool on the shop floor or in the laboratory. Using a certified, standardised gauge simplifies documentation for traceability and supports internal quality audits. Combined with basic handling guidance and routine comparison checks, this reference contributes to consistent measurement outcomes and greater confidence in dimensional control across batches. For reliable, DIN‑compliant gauging solutions and expert advice from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge GmbH for ordering and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M319.130.1 GTIN: 4054469131696 Nominal size: 13 mm Standard: DIN EN ISO 3650 Accuracy grade: Grade 1 Facts Weight: 0.012 kg Cross-section: 35 x 9 mm (for >10.1 mm nominal) Tariff number: 90173000 Special features Material: Special steel, hardened Compliance: DIN EN ISO 3650 Category: End gauges FAQ What tolerance class does this gauge meet? The End gauge 13 mm meets Grade 1 tolerances according to DIN EN ISO 3650, providing a reliable standard for routine inspection and comparison. What material is used for the gauge and why does it matter? The gauge is made from hardened special steel, which maintains surface integrity under repeated contact and prolongs service life for the Metav IndustryLine end gauge M319.130.1. Can the gauge be used directly on the shop floor for machine setup? Yes, this compact 13 mm reference gauge is suitable for quick verification tasks and machine set‑ups where a certified, stable datum is required. How is the cross‑section relevant to handling and stiffness? A cross‑section of 35 x 9 mm for the 13 mm nominal size gives the gauge the stiffness needed to reduce bending during handling, ensuring reproducible measurements in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Benefit from the combination of Grade 0 accuracy, hardened special steel construction and a compact 13 mm nominal length for reproducible reference measurements; order the gauge block directly via Metav Werkzeuge or consult our specialists for selection advice. Single gauge block 13 mm (DIN EN ISO 3650) — Grade 0, hardened special steel by Metav IndustryLine The Single gauge block 13 mm (DIN EN ISO 3650, Grade 0) serves as a traceable reference length for calibration laboratories and precision workshops, offering a compact, stable standard for comparator checks and dimensional verification. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Precise 13 mm nominal length Compact form ideal for calibration sets Precision engineering for reliable reference measurements The block is manufactured to DIN EN ISO 3650 and specified as Grade 0, which defines tight geometric and dimensional tolerances suitable for laboratory reference standards. Manufactured from hardened special steel, the component offers a stable surface finish and minimal deformation under normal handling. The 13 mm nominal length provides a reliable reference for setting up calibration stacks or verifying micrometre and caliper zero points. By complying with an established standard, the element supports consistent measurement results and reduces uncertainty in routine checks. Integration into calibration workflows and metrology benches As a single element for gauge block sets or individual use, this reference length is suitable for comparative calibration, master-setting procedures and high-precision inspection tasks. Its compact dimensions make it simple to incorporate into stacking arrangements with other blocks or to use as a short master when a longer reference would be impractical. The robust special steel construction ensures stable contact areas for wringing and repeatable mating with other reference pieces, enabling effective traceability within a calibration chain. This element complements laboratory equipment and portable inspection kits alike. Durability, handling and storage considerations The design emphasises long service life and repeatable performance: the hardened material resists wear at contact faces while the compact cross-section supports secure handling. The supplied cross-section details indicate the appropriate face geometry for stable seating and wringing behaviour. Lightweight and compact, the block is convenient for transport between bench and inspection machine while retaining sufficient mass to avoid unwanted movement during measurements. Proper storage in a dry, vibration‑free environment preserves surface integrity and ensures longevity. Contact Metav Werkzeuge today for expert advice on integrating this Metav IndustryLine reference into existing calibration procedures or to arrange procurement directly from our Emmerich facility — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M319.130.0 GTIN: 4054469131689 Standard: DIN EN ISO 3650 Nominal length: 13 mm Material: Special steel, hardened Weight: 0.012 kg Tariff code: 90173000 Grade: 0 Core technical figures Nominal length: 13 mm Weight: 0.012 kg Cross-section: bis 10mm 30x9mm, ab 10,1mm 35x9mm Grade: 0 Standard: DIN EN ISO 3650 Materials and special features Hardened special steel construction Compact single gauge block for calibration sets Suitable for wringing and stacking with similar gauge blocks Category: Endmasse / gauge block FAQ What tolerance class does this gauge block conform to? The single gauge block is produced to Grade 0 in accordance with DIN EN ISO 3650, which defines the required geometric and dimensional tolerances for this accuracy class. Can the 13 mm block be combined with other blocks for larger references? Yes, the 13 mm element is intended for stacking and wringing with other gauge blocks to create longer reference lengths or to form master stacks for calibration tasks. What is the material and how does it affect use? The block is made from hardened special steel, chosen for wear resistance and stable contact faces; this supports repeatable wringing and long-term dimensional stability. Is this block suitable for laboratory reference and workshop checks? The 13 mm Grade 0 element is suitable as a laboratory reference for high-precision checks and also practical for workshop-level comparator and inspection procedures. What are the dimensions of the block's cross-section? The cross-section information is provided as: bis 10mm 30x9mm, ab 10,1mm 35x9mm, indicating the standard face geometry for the given size range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.5 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, low weight and ceramic stability for reliable reference measurements; order the gauge block directly via Metav Werkzeuge or consult the Metav team for application advice. Ceramic gauge block 13.5 mm (Grade 1, DIN 861/1) – Metav IndustryLine A Ceramic gauge block 13.5 mm, Grade 1 DIN 861/1 designed as a stable reference for precision length setting and inspection tasks in metrology and workshop environments Grade 1 accuracy to DIN 861/1 Stable ceramic material for thermal stability Nominal length precisely 13.5 mm Lightweight at 0.024 kg for easy handling Reliable reference for routine metrology The Grade 1 classification in accordance with DIN 861/1 marks this block as a trustworthy reference for many workshop and inspection tasks where tight tolerances are required. As a gauge block with a nominal length of 13.5 mm, the component serves as a compact reference for setting calipers, comparators and other length-measuring instruments. The specification offers a clear, verifiable basis for quality assurance and process control, enabling consistent measurements across repeated operations and supporting traceable inspection workflows. Material advantages that support stable results Manufactured from ceramic, the block combines wear resistance and low thermal expansion to reduce measurement drift during everyday use. The low mass (approximately 0.024 kg) makes handling and temporary set-up straightforward while the ceramic composition provides good surface stability against incidental corrosion and magnetic interference. These material properties translate into longer service life for the reference surface and fewer irregularities during repeated wringing or contact‑based checks, which helps sustain calibration intervals and minimise downtime. Practical integration into shop and lab routines The compact format and standard DIN grading simplify inventory and calibration planning: the block can be integrated as a reference for quick verifications, instrument set‑up and gauge comparisons. The item carries a GTIN for traceability and stock management, facilitating procurement and record keeping. Delivered as a single, ready-to-use reference, the block supports efficient workflows in production control, tool setting and first-article inspection while remaining a space-saving addition to any metrology kit. Contact Metav Werkzeuge for technical advice on using the Metav IndustryLine ceramic gauge block and for assistance with ordering and documentation from Emmerich. Technical data SKU: M324.013.5 GTIN: 4054469143156 Weight: 0.024 kg Material: Ceramic Nominal length: 13.5 mm Grade: 1 (DIN 861/1) Facts Nominal length: 13.5 mm Weight: 0.024 kg Tariff code: 90173000 Special features Category: Endmasse (gauge block) Label: Keramik-Endmaß 13,5 mm, Güte 1 DIN 861/1 Intended use: Reference length setting and inspection FAQ What tolerance class does this gauge block conform to? The gauge block conforms to Grade 1 according to DIN 861/1, providing a recognised industrial tolerance class for workshop and inspection tasks. Is the nominal length marked and traceable? The nominal length of 13.5 mm is specified for the Ceramic gauge block 13.5 mm (Grade 1, DIN 861/1) and the product is supplied with a GTIN for inventory traceability. Can the block be used for setting calipers and comparators? Yes, the ceramic block is suitable as a reference for setting calipers, comparators and other length-measuring instruments where a compact Grade 1 reference is appropriate. Does the material offer any advantages for repeated measurements? The ceramic construction provides wear resistance and reduced thermal sensitivity, which supports stable results over repeated contact measurements and wringing operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.5 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, DIN EN ISO 3650 conformity and a hardened special‑steel construction for a dependable length reference; order the gauge block directly via Metav Werkzeuge or consult the team for application advice. Gauge block 13.5 mm (Grade 0) – DIN EN ISO 3650, Hardened special steel The gauge block 13.5 mm serves as a precision length standard for calibration, inspection and setup tasks in metrology labs and toolrooms Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel for dimensional stability Compact 13.5 mm reference size Calibrated reference for repeatable measurements As a Grade 0 length standard compliant with DIN EN ISO 3650, this end measure provides a high‑confidence reference for calibration and comparison tasks. The tight tolerance class Grade 0 ensures minimal deviation from nominal length, making the block suitable for routine gauge calibration and comparative checks in quality control. Using a defined reference reduces process uncertainty and supports reproducible measurement results in workshop and laboratory environments. Material and geometry engineered for stability Constructed from hardened special steel, the block resists wear and maintains its geometry under normal handling. For the nominal size above 10.1 mm the cross‑section is manufactured as 35 x 9 mm, which improves stiffness and reduces susceptibility to bending or torsion during use. The compact mass and balanced form factor assist in stable stacking and wringing, supporting quick set‑up while preserving the integrity of the reference surface for repeatable readings. Practical integration into measurement routines Designed as a single end measure, the block is intended for direct integration into gauge sets, comparison stacks and calibration benches. The precise nominal size and conformity to industry standard make it straightforward to build traceable length chains or to verify instrument zero settings. The robust finish and standardised geometry simplify handling during inspection cycles, helping to maintain throughput in busy metrology departments without compromising measurement quality. Contact Metav Werkzeuge for tailored delivery from Emmerich and expert guidance on embedding this Grade 0 block into existing calibration routines Technical Data Article number: M319.135.0 GTIN: 4054469131702 Weight: 0.012 kg Material: Hardened special steel Standard: DIN EN ISO 3650 Numbers / Core technical data Nominal size: 13.5 mm Cross section: 35 x 9 mm Tolerance grade: 0 Tariff code: 90173000 Special features Single end measure Category: End gauges Compact reference for calibration Hardened surface for wear resistance FAQ What level of accuracy does this gauge block provide? The Grade 0 tolerance of the gauge block 13.5 mm corresponds to a high‑precision reference under DIN EN ISO 3650, suitable for reliable calibration and comparative measurements. Is the material suitable for routine workshop use? Yes, the block is made from hardened special steel, which offers wear resistance and dimensional stability for regular use in inspection and calibration workflows. Can the block be used in a gauge set or stack? The single end measure is designed for inclusion in gauge stacks and comparison sets; its standardised geometry and compact cross‑section support secure wringing and stable stacks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.5 mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Reliable verification of plug and cylindrical gauges is ensured by combining DIN EN ISO 3650 Grade 1 accuracy with a hardened special steel body and a compact cross‑section for stable seating; order the end gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 13.5 mm, DIN EN ISO 3650 — Grade 1 (Metav IndustryLine) The End gauge 13.5 mm is a hardened precision master for go/no‑go checks and dimensional verification in quality control and assembly operations. DIN EN ISO 3650 Grade 1 tolerance Hardened special steel construction Compact cross-section 35×9 mm for 13.5 mm Consistent results thanks to standardised accuracy The gauge is manufactured to DIN EN ISO 3650 and delivered as a Grade 1 end standard, which guarantees reproducible limits for plug and cylindrical gauge verification. Using a standardised master reduces inspection variance and accelerates pass/fail decisions on the shop floor, so measurement routines become more efficient. The combination of norm conformity and clear nominal size ensures interchangeability between production and inspection stages, supporting process control and traceability. Durability and handling optimised for routine use Constructed from hardened special steel, the master gauge offers high wear resistance and retains its reference dimension under frequent use. Its compact cross‑section (for this nominal size the 35×9 mm profile) provides the necessary stiffness for stable seating in gauge bores while remaining easy to handle during repeated checks. The small mass makes the instrument convenient to position without compromising contact stability, which contributes to consistent tactile feedback during manual verification. Practical integration into inspection workflows As a precision control element, this end standard fits established calibration and inspection procedures and complements existing gauge sets and fixtures. Marking and product coding support inventory and traceability; the master gauge serves as a quick verification tool at incoming inspection, in‑process control or final inspection. Metav IndustryLine supplies this component as part of a broader selection of measurement equipment, helping workshops consolidate suppliers and maintain reliable stock for routine quality assurance. For reliable validation of plug and cylindrical gauges, contact Metav Werkzeuge for technical advice or to order the Metav IndustryLine End gauge 13.5 mm directly via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M319.135.1 GTIN: 4054469131719 Material: special steel, hardened Nominal size: 13.5 mm Norm: DIN EN ISO 3650 Grade: 1 Tariff number: 90173000 Data Nominal size: 13.5 mm Weight: 0.012 kg Cross-section: 35×9 mm ECLASS: 21170108 Special features Hardened special steel DIN EN ISO 3650 compliance, Grade 1 Compact cross-section optimised for 13.5 mm end gauge Category: End gauges Manufacturer: Metav IndustryLine FAQ What tolerance class does this end gauge comply with? The end gauge meets DIN EN ISO 3650 and is produced to Grade 1, which defines the permissible deviation band for the 13.5 mm nominal dimension. Is the gauge suitable for repeated go/no‑go checks in production? Yes, the hardened special steel construction and compact profile make the gauge appropriate for frequent verification tasks in incoming inspection, in‑process control and final quality checks. Can this master gauge be used with existing gauge fixtures? The nominal size and standard compliance mean the gauge integrates with common plug and cylindrical gauge setups; the compact cross‑section supports stable seating in many fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
131.4mm Ceramic Gauge Block Calibration Standard Grade 1, DIN EN ISO 3650/1 - Metav IndustryLine
Combining the thermal stability of ceramic, Grade 1 accuracy and conformity with DIN EN ISO 3650/1, this 131.4 mm end gauge delivers a stable, repeatable reference for caliper calibration; order directly via Metav Werkzeuge or request advice from our consultants for integration into quality workflows. Ceramic End Gauge M318.204.2 — 131.4 mm, Grade 1 (Metav IndustryLine) The Ceramic End Gauge M318.204.2 is a precision reference instrument designed for calibrating calipers and similar measuring tools in workshops and metrology labs. Ceramic material for stable reference 131.4 mm nominal length Grade 1 accuracy class Compliant with DIN EN ISO 3650/1 Stable reference for reliable calibration results The primary advantage of this gauge is repeatability: manufactured to Grade 1 standards and to DIN EN ISO 3650/1, the reference length of 131.4 mm provides a dependable baseline for checking and adjusting measuring instruments. As a purpose-made end measure, the instrument reduces uncertainty in routine checks and helps maintain consistent tolerances across production runs. The controlled geometry and surface finish minimise contact ambiguity, so calibration procedures run with fewer readjustments and less downtime. Material benefits and environmental stability Constructed from ceramic, the gauge combines excellent surface hardness with low thermal expansion, which reduces length changes when ambient temperatures vary. Ceramic's wear resistance preserves the reference faces over prolonged use, extending service life compared with softer materials. The comparatively high mass of 2.6 kg contributes to stable seating during measurement, helping to avoid rocking or micro-movements that can affect readings. These properties make the gauge particularly suitable where dimensional stability and low maintenance are priorities. Integration into quality workflows and practical advantages As a dedicated end measure for calibration tasks, this reference block supports efficient quality control and traceable check routines. The clear classification and supplied data facilitate documentation within inspection plans, while compatibility with standard calibration jigs speeds up throughput in inspection stations. The compact, single-length format simplifies storage and handling in the workshop while providing a precise datum for both analogue and digital callipers. Using a standardised ceramic reference helps laboratories and workshops achieve reproducible results with minimal operator influence. For Metav IndustryLine traceability and procurement, contact Metav Werkzeuge in Emmerich to arrange supply, request datasheets or discuss batch availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.204.2 GTIN: 4054469158068 Material: Ceramic Norm: DIN EN ISO 3650/1 Grade: 1 ECLASS: 21170109 Facts Nominal length: 131.4 mm Mass: 2.6 kg Tariff number: 90173000 Special features Grade 1 accuracy Ceramic construction with low thermal expansion Designed as an end gauge for calibration of calipers and measuring instruments Category: End gauges FAQ What is the primary use of this end gauge? The Ceramic End Gauge M318.204.2 serves as a stable, traceable reference for the calibration and verification of callipers and comparable measuring devices. Can this gauge be used with digital and analogue callipers? Yes, the reference length and flat reference faces make the gauge suitable for routine checks of both digital and analogue measuring tools. How does the ceramic material affect performance? Ceramic offers high surface hardness and low thermal expansion, which helps maintain the reference length and resists wear over repeated use. What does Grade 1 indicate for this product? Grade 1 denotes a high-precision accuracy class for end measures under the relevant standard, intended for workshop and laboratory calibrations. Is a calibration certificate included with the gauge? The product data specifies conformity with DIN EN ISO 3650/1, but does not state that a specific calibration certificate is supplied with the item Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
131.4mm Slip Gauge For Calibrating Calipers Grade 1, DIN EN ISO 3650/1 - Metav IndustryLine
Take advantage of the combination of traceable Grade 1 accuracy, robust special steel construction and a compact 131.4 mm nominal length for consistent caliper verification; order the gauge directly via Metav Werkzeuge for secure delivery and expert advice. End standard for caliper calibration 131.4 mm, Grade 1 (Metav IndustryLine) The End standard for caliper calibration 131.4 mm, Grade 1 serves as a hardened length reference for the verification of caliper jaws and short-range measuring systems in both workshop and laboratory environments. Grade 1 accuracy (DIN EN ISO 3650/1) 131.4 mm nominal length Special steel construction Suitable for caliper verification Precision engineered for repeatable calibration The gauge is manufactured to Grade 1 tolerances under DIN EN ISO 3650/1, providing a reliable reference length of 131.4 mm for comparative checks. This class structure means the component functions as a stable benchmark for jaw alignment and end-face reproducibility, reducing uncertainty in routine verification. The standardised compliance supports integration into established test procedures, allowing facilities to document consistency across repeat measurements and to demonstrate conformity with recognised length‑measurement criteria. Reliable workshop performance with workshop-hardy construction Constructed from special steel, the unit balances surface stability with mechanical resilience, which helps preserve the reference faces during handling and short-term use. The gauge’s mass of 2.6 kg contributes to a steady feel at the bench and reduces the risk of displacement during comparison tests. These characteristics make it suitable for frequent checks of calipers and similar short-range instruments, where a robust reference reduces rework and minimises time lost to ambiguous readings. Compliance and long-term value for quality processes As a reference produced to DIN EN ISO 3650/1, the gauge supports traceable measurement practices and aligns with standardised documention requirements used in quality control. The hardened measuring faces and stable material selection extend service life, which lowers total cost of ownership through reduced replacement frequency. For calibration laboratories and workshop quality stations alike, the gauge offers a compact, durable solution that supports reproducible verification routines and sensible asset management. For traceable caliper checks and procurement advice, rely on Metav Werkzeuge—contact Metav Werkzeuge for supply and technical information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.207.2 GTIN: 4054469158037 ECLASS: 21170109 Tariff number: 90173000 Measurements & weights Nominal length: 131.4 mm Weight: 2.6 kg Grade: 1 Materials & standards Material: Special steel Standard: DIN EN ISO 3650/1 FAQ What tolerance class does this calibration standard meet? The product meets Grade 1 tolerance as specified by DIN EN ISO 3650/1, providing a recognised accuracy class for short-length reference measures. Which instruments can be checked with this 131.4 mm standard? The 131.4 mm reference is intended for comparative verification of calipers and similar short-range measuring systems where a compact, stable end standard is required. What is the construction material and how does that benefit use? Made from special steel, the gauge offers durable, wear-resistant faces that maintain dimensional stability and reduce the need for frequent replacement. Is the reference suitable for routine workshop verification? Yes; the combination of Grade 1 accuracy and robust construction makes it appropriate for regular bench checks and reproducible verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of low thermal expansion, Grade 1 measurement accuracy and compact handling for reliable length standards in production and quality control. Order the Ceramic gauge block 13 mm, Grade 1 DIN 861/1 directly via Metav Werkzeuge or ask our consultants if needed. Ceramic gauge block 13 mm, Grade 1 DIN 861/1 — Metav IndustryLine Ceramic gauge block 13 mm, Grade 1 DIN 861/1 is a compact, hard-wearing length standard for precision checks and gauge setting in workshops and laboratories Grade 1 accuracy to DIN 861/1 Stable ceramic material for low thermal drift Compact 13 mm nominal length Article number M324.013 for traceability Reliable accuracy and thermal stability for repeatable results The Grade 1 classification according to DIN 861/1 guarantees a reproducible reference length suitable for calibration comparison and instrument setting. Constructed from ceramic, the block combines dimensional constancy with low thermal expansion, which reduces measurement variation when ambient temperature shifts occur. As a 13 mm length standard, the component serves reliably as a short master for micrometre checks or as part of gauge stacks where stable incremental steps are required. Compact practicality that supports daily metrology tasks With a nominal length of 13 mm and a low mass, the unit is easy to handle and quick to integrate into routine checks without adding significant load to fixtures or measuring systems. The small footprint makes it practical for tight benches and portable test kits while retaining the surface quality expected from a hardened reference. The compact format supports efficient workflows: quick comparisons, fast set-ups and consistent zero references for callipers and comparators. Traceability, identification and workshop applicability Identified as M324.013 and listed under GTIN 4054469143149, the component is supplied as a defined precision standard by Metav IndustryLine. The clear article identification supports inventory management and traceability in quality documentation. For operations that require documented calibration, calibrated certificates can be arranged to align the block with internal quality systems and audit trails. Choosing a ceramic standard from an established supplier reduces the uncertainty in short-range length control and supports reproducible production outcomes. Contact Metav Werkzeuge for assistance with application matching and to request calibration options for the Metav IndustryLine ceramic gauge block M324.013 Technical Data Article number: M324.013 GTIN: 4054469143149 Weight: 0.023 kg Facts Nominal size: 13 mm Tolerance grade: Grade 1 (DIN 861/1) Material: Ceramic Special features Low thermal expansion High surface hardness Category: Gauge block / End gauge FAQ What measurement tolerance does this gauge block provide? The Ceramic gauge block 13 mm, Grade 1 DIN 861/1 (M324.013) meets the dimensional requirements of Grade 1 under DIN 861/1, providing a reproducible short-range reference for workshop and laboratory comparisons. Is the ceramic block suitable for daily workshop use? Yes, the Metav IndustryLine ceramic gauge block 13 mm is designed for routine use: its ceramic material offers wear resistance and thermal stability appropriate for frequent checks and gauge setting. How should the block be stored and cleaned? Store the M324.013 in a clean, dry environment and protect contact surfaces from contamination; clean gently with a soft cloth and approved solvent to preserve surface integrity and measurement reliability. Can a calibration certificate be supplied with the block? A calibration certificate can be arranged for the Ceramic gauge block 13 mm, Grade 1 DIN 861/1 (M324.013) to support traceability within internal quality systems and audits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic construction, a 14 mm nominal size and Grade 1 accuracy to DIN 861/1 for a stable, traceable reference in precision workflows; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic Gauge Block 14 mm, Grade 1 (DIN 861/1) — Metav IndustryLine A Ceramic Gauge Block 14 mm, Grade 1 (DIN 861/1) designed as a compact, high-precision reference for calibration, inspection and workshop measurement tasks Ceramic construction for thermal stability Grade 1 accuracy to DIN 861/1 Compact 14 mm nominal size for reference checks Stable reference for calibration and inspection The ceramic material and Grade 1 (DIN 861/1) specification make this block a reliable reference standard for routine calibration and dimensional checks. As a compact end gauge with a 14 mm nominal size, it provides a defined, certified length for comparative measurements and gauge block stacks. The combination of a precisely manufactured nominal dimension and the DIN reference offers measurable traceability that supports consistent quality control in small-part inspection and instrument calibration. Material benefits that reduce measurement uncertainty Ceramic offers low thermal expansion and good dimensional stability, which means the reference length remains consistent across typical workshop temperature fluctuations. The thermal stability of the material reduces short-term drift during use, while the hard, homogenous surface minimises wear under careful handling. These properties contribute directly to reduced measurement uncertainty when used as a control master in a calibration routine or as a transfer standard between instruments. Practical use in labs and production environments Compact and lightweight, this gauge block is convenient for use on inspection benches, in toolrooms and in calibration laboratories where repeatable reference points are required. The small footprint assists quick integration into existing test setups and makes it suitable for routine verification of callipers, micrometers and comparator fixtures. Specified as a Grade 1 end gauge to DIN 861/1, it supports structured quality processes and provides a documented reference for acceptance testing and internal audits. Contact Metav Werkzeuge today for tailored advice on integrating this Grade 1 ceramic gauge block into inspection or calibration routines, and secure logistical support from Metav Werkzeuge in Emmerich Technical data SKU: M324.014 GTIN: 4054469143163 Designation: Keramik-Endmaß 14 mm, Güte 1 DIN 861/1 Specifications Nominal size: 14 mm Weight: 0.025 kg Quality class: Grade 1 (DIN 861/1) ECLASS: 21170108 TARIC / CN: 90173000 Materials & features Material: Ceramic Category: End gauges / gauge blocks Compact reference dimension FAQ What accuracy does this gauge block provide? The Ceramic Gauge Block 14 mm, Grade 1 (DIN 861/1) is supplied to Grade 1 tolerances as specified in DIN 861/1, offering a stable reference appropriate for routine calibration and comparative measurement. Can the ceramic block be used as a master for calliper checks? Yes, the 14 mm nominal size and stable ceramic material make this block well suited as a master for calliper and micrometer verification in regular inspection procedures. Is the material suitable for use in environments with temperature changes? Ceramic exhibits low thermal expansion, so the block maintains dimensional stability better than many metals across normal workshop temperature ranges; still, use within controlled conditions is recommended for highest accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
The combination of DIN EN ISO 3650 Grade 0 accuracy and hardened special steel construction provides a durable, traceable reference for routine verification tasks; order the gauge via Metav Werkzeuge or contact our advisors for application support. Single end gauge 14 mm (Grade 0), DIN EN ISO 3650 — Metav IndustryLine The Single end gauge 14 mm is a hardened special-steel reference designed for precise length verification and setup work in workshop inspection and calibration environments. DIN EN ISO 3650 compliance for standardised tolerances Grade 0 accuracy for reproducible reference measurements Hardened special steel for long-term dimensional stability Cross-section optimised for rigid handling and small components Precision and conformity that stabilises quality control As a standardised reference, the 14 mm single end gauge delivers repeatable measurements thanks to its conformity with DIN EN ISO 3650 and its Grade 0 tolerance class. This formal standardisation means the gauge can be incorporated into routine checks and incoming inspection procedures with confidence that results are comparable across shifts and sites. The clear conformity to an established norm reduces interpretation effort during audits and supports traceable quality workflows. Robust construction for everyday handling and longevity Manufactured from hardened special steel, this small yet sturdy length standard combines low mass with a geometry engineered for stiffness; the cross-section for this nominal size is 35 x 9 mm, ensuring secure grip and minimal deflection during handling. With a weight of 0.012 kg, the gauge is simple to position while offering the mechanical resistance needed to keep measuring faces true over repeated use. The material choice increases wear resistance and maintains the reference faces without frequent refurbishment. Practical integration into inspection benches and jigs The gauge’s compact nominal size makes it suitable for fine adjustment tasks, go/no‑go checks, and as a comparative master in bench setups. Identifiers such as SKU M319.140.0 and GTIN 4054469131726 support inventory management and traceability in procurement processes. Because the unit adheres to a recognised standard and a clear tolerance grade, it can be specified in inspection plans and measurement procedures as a reliable reference piece, simplifying documentation and change control. Choose the Metav IndustryLine single end gauge for professional, standardised reference measurements — contact Metav Werkzeuge for availability, delivery options and tailored technical advice. Technical data Article number: M319.140.0 GTIN: 4054469131726 Norm: DIN EN ISO 3650 Facts Nominal size: 14 mm Quality grade: 0 Weight: 0.012 kg Cross-section (for >10.1 mm): 35 x 9 mm Tariff number: 90173000 Special features Material: special steel, hardened Category: End measures / precision reference Manufacturer brand: Metav IndustryLine FAQ What tolerance class does this end gauge meet? The single end gauge is supplied to Grade 0 tolerance in accordance with DIN EN ISO 3650, providing a standardised accuracy class for reference measurements. Is the material suitable for regular workshop use? Yes — the gauge is made from hardened special steel, chosen to resist wear during routine handling and to preserve the measuring faces over time. How is this gauge identified for stock and traceability? Identification is provided by SKU M319.140.0 and GTIN 4054469131726, which support procurement, stock control and audit trails. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14 mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Precision assured by DIN EN ISO 3650 Grade 1 and hardened special steel, combined with a compact 14 mm nominal size, provides a stable reference for routine inspection and setup tasks. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 14 mm — Grade 1 (DIN EN ISO 3650) — Metav IndustryLine End gauge 14 mm is a hardened reference length for high-precision inspection and workshop metrology, designed for reliable dimensional control in production and maintenance environments DIN EN ISO 3650, Grade 1 accuracy Hardened special steel construction Nominal size 14 mm for precision setups Compact cross-section for stable contact Consistent tolerance for reliable quality control The DIN EN ISO 3650 specification ensures that this reference piece meets internationally recognised geometric and dimensional requirements. Delivered as a Grade 1 item, the gauge offers fine absolute conformity suitable for precise comparative measurement and verification tasks in inspection routines. Use of a standardised grade simplifies documentation and decision-making in quality control, while the defined nominal dimension supports traceable checks across fixtures and verification instruments. The result is predictable measurement behaviour that strengthens process control and reduces rework. Robust construction that lasts under shop conditions Manufactured from hardened special steel, the component resists wear and preserves its reference dimension over many cycles of use. The comparatively slender form with a 35 x 9 mm cross-section (applicable for nominal sizes above 10.1 mm) balances contact stability with manageable handling, keeping distortion low during manipulation. These material and geometry choices translate into a lower rate of surface degradation and extended service life, which reduces downtime and replacement frequency for calibration sets and inspection benches. Compact size for flexible integration in inspection workflows With a nominal size of 14 mm, this reference block is compact enough for tight jigs and small assembly checks while remaining robust for repeated use in the workshop. Its small mass supports quick repositioning and makes it straightforward to include in routine dimensional sequences and gauge stacks. The modest footprint and well-defined geometry allow effortless incorporation into existing measurement sets, supporting consistent process checks without extensive change to established procedures. Choose Metav IndustryLine when Grade 1 traceability and durable construction are essential; contact Metav Werkzeuge in Emmerich for availability and application guidance Technical data Article number: M319.140.1 GTIN: 4054469131733 Nominal size: 14 mm Material: Special steel, hardened Grade: 1 Standard: DIN EN ISO 3650 Dimensions & weights Cross-section: 35 x 9 mm (for >10.1 mm nominal) Weight: 0.012 kg Standards & identifiers Tariff number: 90173000 SKU: M319.140.1 FAQ What does Grade 1 mean for this reference piece? Grade 1 indicates a high level of dimensional conformity under DIN EN ISO 3650, making the End gauge 14 mm suitable for precise comparative checks and standardised inspection tasks. What material is used and why does it matter? The End gauge 14 mm is made from hardened special steel, chosen for wear resistance and dimensional stability so the reference dimension remains reliable during repeated use. Is the 14 mm size suitable for workshop verification tasks? Yes; the compact nominal size is intended for small to medium inspection tasks and integrates well into gauge sets and fixture checks where a stable short reference length is required. How can the item be identified when ordering? Refer to article number M319.140.1 or GTIN 4054469131733 to ensure the correct Metav IndustryLine Grade 1 end gauge is supplied Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com