End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
4 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic stability, Grade 1 accuracy and compact handling for reliable reference measurements; order the gauge block directly via Metav Werkzeuge or contact the consultants for application advice. Ceramic Gauge Block 4 mm, Grade 1 DIN 861/1 — Ceramic end gauge by Metav IndustryLine A Ceramic Gauge Block 4 mm, Grade 1 DIN 861/1 designed as a compact reference standard for calibration labs and precision workshops Ceramic material for thermal stability Grade 1 accuracy per DIN 861/1 Nominal length 4 mm for reference tasks Low weight 7 g for easy handling Stable reference for everyday calibration tasks The ceramic construction ensures minimal thermal expansion and excellent dimensional stability, which is crucial when establishing a reliable reference in a workshop or calibration environment. As a Grade 1 end gauge it provides an exact nominal length of 4 mm, offering repeatable benchmarks for comparative checks and instrument verification. The compact form factor reduces handling errors and supports fast, routine control measurements. Durable, low-maintenance design that reduces rework Made from high-grade ceramic, this reference tool resists wear and surface deformation better than many metallic counterparts, maintaining its measuring face integrity over prolonged use. The low mass and corrosion-free nature mean less cleaning and no risk of rust, so operational downtime for upkeep is reduced. Such robustness translates directly into fewer failed inspections and a steadier production flow. Practical fit for calibration labs and quality departments This end gauge serves well where short, highly accurate references are required: setting comparison standards, verifying micrometre and caliper readings, and as a stable element in inspection jigs. The lightweight construction aids precise placement without excessive clamping force, while the Grade 1 tolerance defined in DIN 861/1 ensures suitability for general metrology tasks in machine shops and production quality control. Metav’s experience and logistic presence in Emmerich support reliable delivery and product consistency for regular usage. Contact Metav Werkzeuge today to discuss how the Grade 1 ceramic gauge block can be integrated into existing calibration routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M324.004 GTIN: 4054469142968 Category: Endmasse Measurements & Weights Nominal size: 4 mm Tolerance grade: Grade 1 (DIN 861/1) Weight: 0.007 kg ECLASS: 21170108 Customs tariff: 90173000 Material & Features Material: Ceramic Primary use: Precision reference and calibration Label: Keramik-Endmaß 4 mm, Güte 1 DIN 861/1 FAQ What applications is this ceramic gauge block suited for? The ceramic gauge block is suited for calibration labs, workshop quality control and as a short reference for inspection jigs and comparative measurements. How accurate is the 4 mm reference? The 4 mm gauge is manufactured to Grade 1 tolerances in accordance with DIN 861/1, providing reliable repeatability for standard workshop calibration tasks. Is ceramic better than steel for gauge blocks? Ceramic offers lower thermal expansion and improved wear resistance compared with many steels, making this block advantageous for stable short references. How should the gauge block be stored and handled? Store the block in a clean, dry environment and handle with care to avoid contamination of the measuring faces; its low weight simplifies precise placement. Can this block be used as a transfer standard in inspection fixtures? Yes, the compact 4 mm ceramic block is practical as a transfer or reference element in inspection fixtures where a stable, short reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4 mm Gauge Block Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a certified measurement standard combined with robust, hardened special steel and a compact cross‑section for reliable workshop reference measurements; order the single gage block directly via Metav Werkzeuge or consult the Metav technical team for application advice. Single gage block 4 mm – Grade 0, DIN EN ISO 3650 by Metav IndustryLine Single gage block 4 mm is a hardened precision length standard for calibration, inspection and setup tasks in tool rooms and quality departments DIN EN ISO 3650 Grade 0 length standard Hardened special steel for dimensional stability Compact cross-section 30 x 9 mm for tight stacks Nominal size 4 mm, high handling convenience Precision backed by international standards This compact reference is manufactured to DIN EN ISO 3650 and specified as Grade 0, which ensures tight dimensional tolerances suitable for workshop and laboratory reference work. As a gauge block, it provides a stable, well‑defined nominal length of 4 mm, making it suitable for use in precision setups, gauge stacks and comparative checks. The combination of standard conformity and small thermal mass means repeatable results with limited warm‑up drift. Robust construction for repeatable measurements Made from special steel and hardened for wear resistance, the block’s cross‑section 30 x 9 mm balances rigidity and ease of handling. The low mass (approx. 0.008 kg) and compact footprint reduce the risk of bending during stacking and make the piece easy to manoeuvre when forming stacks or assembling reference lengths. This construction supports stable contact surfaces and contributes to lasting accuracy in everyday inspection tasks. Practical use and workshop integration The block is a practical choice for toolmakers, calibration benches and quality inspectors who require a small, reliable reference standard. Identifiable by SKU M319.040.0 and GTIN 4054469131320, the piece integrates easily into existing sets and measurement routines. Supplied as an individual end standard, it is ideal for building precise stacks where a 4 mm increment is required, enabling efficient setup times and clear traceability within quality processes. For assured delivery and application guidance, request this Metav IndustryLine reference through Metav Werkzeuge—our Emmerich team provides technical advice and reliable supply for workshop precision needs. Technical data Article number: M319.040.0 GTIN: 4054469131320 Tariff number: 90173000 Facts Nominal size: 4 mm Weight: 0.008 kg Cross-section: 30 x 9 mm Special features Material: Special steel, hardened Tolerance/Grade: Grade 0 (DIN EN ISO 3650) Standard: DIN EN ISO 3650 Category: Endmasse / Gauge block FAQ What tolerance class does this gage block meet? The block is supplied to Grade 0 in accordance with DIN EN ISO 3650, providing the dimensional tolerance expected for workshop reference standards. Is the 4 mm block suitable for building gauge stacks? Yes, the 4 mm dimension and compact 30 x 9 mm cross‑section make it well suited for precision stacks and incremental references on the workshop bench. Which material is used and how does that affect stability? Manufactured from hardened special steel, the block offers wear resistance and dimensional stability under normal workshop conditions, supporting repeatable measurement results. How is this item identified for inventory and procurement? The product is listed as SKU M319.040.0 with GTIN 4054469131320, enabling easy procurement and traceability in stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4 mm Gauge Block Grade 1 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Reliable, compact reference precision: the 4 mm gauge block combines DIN EN ISO 3650 Grade 1 conformity, a hardened special steel construction and a low mass for effortless handling. Benefit from a stable reference standard for routine inspections and fixture set‑up; order directly via Metav Werkzeuge or consult the technical team for application advice. Gauge block 4 mm — precision end standard, DIN EN ISO 3650, Grade 1 (Metav IndustryLine) Gauge block 4 mm is a compact, hardened end standard designed for length references, calibration tasks and quality control in workshop and inspection environments DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 4 mm reference standard Consistent reference accuracy for routine inspection The product delivers Grade 1 conformity under DIN EN ISO 3650, making it suitable as a workshop reference for comparative measurements and fixture set‑up. As a compact reference standard, the block provides a reproducible nominal length of 4 mm, which supports traceable measurement chains and reduces uncertainty in go/no‑go checks. This technical consistency translates into fewer production interruptions and a reliable benchmark for incoming inspection or first‑article control. Built for wear resistance and user‑friendly handling Manufactured from hardened special steel, the block resists surface damage and retains its geometry under typical workshop handling. The small mass (approx. 0.008 kg) and compact cross‑section enable quick positioning and minimal thermal lag when compared with bulkier standards, which reduces handling error and speeds up measurement cycles. These material and design choices minimise maintenance needs and extend service life, so the reference piece remains a dependable part of daily quality routines. Simple integration into inspection workflows Marked and catalogued for easy identification, this compact end standard fits naturally into established inspection procedures. The precise nominal size and conformity to a recognised international standard support calibration planning and routine verification of measuring equipment. Where traceability or further documentation is required, Metav Werkzeuge can advise on calibration options and compatible workflows to ensure conformity with internal quality systems. Contact Metav Werkzeuge in Emmerich for procurement and technical guidance on this Metav IndustryLine gauge block (SKU M319.040.1) and its suitability for specific measurement tasks Technical Data SKU: M319.040.1 GTIN: 4054469131337 Customs tariff number: 90173000 Label: Endmaß 4 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Facts Nominal size: 4 mm Weight: 0.008 kg ECLASS: 21170108 Special features Material: special steel, hardened Standard: DIN EN ISO 3650 Quality grade: 1 Cross-section: bis 10mm 30x9mm, ab 10,1mm 35x9mm Category: Endmasse (gauge blocks) FAQ What level of precision does this gauge block offer? The gauge block meets Grade 1 as defined by DIN EN ISO 3650, providing a workshop‑grade reference suitable for routine inspection and comparative measurement. Can the gauge block be used as a calibration reference for micrometres and callipers? Yes, the 4 mm reference standard is intended for use as a length benchmark in setting and checking the accuracy of micrometres, callipers and other dimensional gauges. How should the gauge block be cared for to maintain accuracy? Handle the block with clean hands or gloves, avoid impacts and store it in a dry, low‑dust environment; periodic visual inspection is recommended to detect any surface wear that could affect measurements. Is this gauge block suitable for use in production environments? The hardened special steel construction and conformity to DIN EN ISO 3650 make the block robust enough for regular use in workshop and production inspection stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.5 mm Gauge Block Grade 1 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, hardened special steel construction and the compact 4.5 mm nominal length for reliable reference measurements and stack building; order this precision gauge directly via Metav Werkzeuge or consult our specialists for application advice. Gauge block 4.5 mm — Gauge block, Grade 1, DIN EN ISO 3650 (Metav IndustryLine) The gauge block 4.5 mm is a hardened special‑steel calibration reference designed for precision stacking and dimensional verification in inspection and laboratory environments. Grade 1 tolerance to DIN EN ISO 3650 Hardened special steel construction Nominal 4.5 mm length for precision stacking Traceable accuracy that reduces rework and inspection time A compact reference such as this gauge block delivers measurable benefits in workflow efficiency. Manufactured to DIN EN ISO 3650 and specified as Grade 1, the block provides a well‑defined tolerance band that supports repeatable measurements and reduces uncertainty in go/no‑go decisions. Using a known reference length in calibration routines shortens inspection cycles and helps prevent costly rework by catching deviations early in the process. The 4.5 mm nominal size is especially useful for fine stacks or as a master element within a set of reference standards. Durable geometry for repeatable contact measurement The construction from special steel, hardened for dimensional stability, ensures that the block maintains its form under regular handling and stacking. A consistent cross‑section (30 x 9 mm for nominal lengths up to 10 mm) gives good contact area and prevents twisting when assembled into stacks, which stabilises the reference during tactile or optical comparison. The low mass (0.008 kg) and compact geometry facilitate rapid integration into existing measuring jigs and comparators while retaining the surface integrity required for repeated metrological use. Practical integration into calibration and quality workflows Integration into inspection procedures is straightforward: the block functions as a reference element for setting comparators, checking micrometre standards and building nominal stacks for gauge calibration. Marked by its Grade 1 designation and associated technical characteristics, the element fits both laboratory benches and shop‑floor quality stations. Labelling and traceability support documentation of inspection records and help maintain a coherent quality chain across production and maintenance tasks; the product is supplied as part of Metav IndustryLine's portfolio for consistent quality handling. Contact Metav Werkzeuge for tailored advice on using Metav IndustryLine gauge blocks in calibration routines and for delivery from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M319.045.1 GTIN: 4054469131351 Norm: DIN EN ISO 3650 Nominal length: 4.5 mm Material: special steel, hardened Grade: 1 Weight: 0.008 kg Cross‑section: 30 x 9 mm (≤ 10 mm) Tariff number: 90173000 Facts Nominal length: 4.5 mm Weight: 0.008 kg Cross‑section: 30 x 9 mm Tolerance class: Grade 1 GTIN: 4054469131351 Special features Material: special steel, hardened Standard: DIN EN ISO 3650 Category: Gauge blocks Manufacturer: Metav IndustryLine FAQ What tolerance class does this gauge block meet? The gauge block meets Grade 1 tolerance according to DIN EN ISO 3650, providing a defined accuracy suitable for calibration and inspection tasks. Is the 4.5 mm gauge block suitable for stacking with other blocks? Yes, the 4.5 mm gauge block is designed for precision stacking and is compatible with standard gauge block sets and comparators; its cross‑section (30 x 9 mm for lengths up to 10 mm) helps ensure stable stacks. What material is used and how does it affect stability? Manufactured from hardened special steel, the block offers dimensional stability and resistance to wear, which preserves its reference length during normal metrological use. How is the product identified for ordering and inventory? This item is listed as M319.045.1 (GTIN 4054469131351) in the Metav IndustryLine range, facilitating straightforward ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.5 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of Grade 0 accuracy, DIN EN ISO 3650 conformity and a hardened special steel construction for consistent reference measurements; order the single gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Single gauge block 4.5 mm — precision end gauge, Grade 0 A single end gauge designed as a stable dimensional reference for calibration benches and laboratory checks across mechanical workshops and toolrooms. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Precision reference for calibration benches Certified reference for repeatable dimensional control The single gauge block provides a verifiable reference at 4.5 mm with a tolerance class of Grade 0 according to DIN EN ISO 3650, making it suitable for high-precision calibration tasks. Manufactured from hardened special steel, the piece resists wear and preserves its measuring face under regular use, ensuring long-term dimensional stability. The standard conformity offers a clear technical basis for traceability in quality systems and makes this reference suitable for use on calibration benches and in inspection labs where repeatability and documented compliance are essential. Compact form factor that supports efficient workshop workflows Designed with a compact cross-section of 30 x 9 mm (applicable for sizes up to 10 mm), the component balances stiffness and handling for everyday workshop routines. The short, robust profile minimises tilting during placement and eases stacking with other reference pieces when setting micrometres, calipers or measuring machines. The small mass and proven geometry reduce the influence of thermal gradients during short handling times, so set-up and verification cycles remain efficient without sacrificing measurement confidence. Built for quality assurance and process stability As a precision reference, the gauge piece supports internal quality assurance processes by providing a stable baseline for verifying measuring instruments and fixtures. Its standardised dimensions and material choice reduce rework and measurement uncertainty when used as part of a calibration plan. Combined with Metav’s commitment to accessible precision and distribution from Emmerich, the product strengthens process reliability in production and maintenance environments, helping to maintain consistent tolerances across batches and assemblies. Contact Metav Werkzeuge in Emmerich for detailed application guidance and to arrange supply of the M319.045.0 single gauge block with suitable delivery options Technical data Article number: M319.045.0 GTIN: 4054469131344 Nominal size: 4.5 mm Material: Hardened special steel Grade: 0 Standard: DIN EN ISO 3650 Facts Weight: 0.008 kg Cross-section: 30 x 9 mm Tariff number: 90173000 Special features Single end gauge block Precision reference for calibration and dimensional checks Category: End gauges FAQ What tolerance class does this gauge block meet? The single gauge block meets Grade 0 tolerance as specified in DIN EN ISO 3650, providing a high-precision reference for calibration tasks. What material is the gauge block made from and why? This end gauge is made from hardened special steel, chosen for wear resistance and dimensional stability under normal workshop conditions. How is the gauge block used in a calibration routine? The M319.045.0 single gauge block serves as a reference standard for setting micrometres, checking calipers and verifying gauge blocks stacks during instrument calibration. Can this single gauge be combined with other blocks for larger values? Yes, the piece is designed for stackability with other end gauges and reference blocks to create tailored reference lengths as required in calibration procedures. How should the gauge block be stored to retain accuracy? Store the gauge block in a dry, temperature-stable environment, free from contaminants and mechanical shocks; handle with clean gloves or cloth to avoid oils and fingerprints. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.5mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, ceramic durability and a compact 4.5 mm nominal size for dependable reference measurements; order the gauge block directly via Metav Werkzeuge or ask the consultants for application advice. Ceramic gauge block 4.5 mm, Grade 1 DIN 861/1 — Metav IndustryLine precision reference A Ceramic gauge block 4.5 mm, Grade 1 DIN 861/1 intended as a wear‑resistant reference standard for dimensional inspection, calibration and precision workshop checks Grade 1 accuracy per DIN 861/1 Nominal length 4.5 mm Ceramic material with high wear resistance Compact reference standard for precision checks Reliable reference accuracy for routine inspection As a Grade 1 reference, this precision block is manufactured to DIN 861/1 requirements to serve as a repeatable standard in inspection routines. The compact nominal length of 4.5 mm makes the block well suited for verification of micrometres, comparators and gauge block sets where short, stable references are required. The result is consistent, comparable measurements across shifts and instruments, helping to reduce process variation and maintain production tolerances. Ceramic construction reduces wear and thermal drift Made from ceramic, the block combines exceptional wear resistance with low thermal expansion, which reduces dimensional drift during routine use and short handling times. Ceramic’s corrosion resistance and surface hardness extend service life compared with softer materials, so the interval between rework and replacement is lengthened. The material choice therefore supports both long‑term measurement stability and lower lifecycle disturbance for metrology equipment. Practical integration in quality workflows The compact precision block functions as a convenient reference standard in laboratory and workshop environments: suitable for set‑up checks, comparator baselineing and quick comparative measurements on the shop floor. Its small mass and dimensions make it easy to position in tight setups while still providing a stable datum. For organisations seeking reproducible results from everyday inspection tasks, this block is a practical component of a traceable measurement chain and a straightforward way to maintain control over critical short‑range checks. Speak with Metav Werkzeuge for tailored advice on integrating Metav IndustryLine ceramic gauge blocks into existing calibration procedures and to arrange supply from the Emmerich quality centre Technical data SKU: M324.004.5 GTIN: 4054469142975 Material: Ceramic Nominal length: 4.5 mm Grade: 1 (DIN 861/1) Weight: 0.008 kg Tariff number: 90173000 Facts Nominal length: 4.5 mm Weight: 0.008 kg GTIN: 4054469142975 Tariff number: 90173000 Special features Material: ceramic Grade 1 per DIN 861/1 Category: End measures Manufacturer: Metav IndustryLine Compact, wear‑resistant reference standard FAQ What level of accuracy does Grade 1 indicate? Grade 1 in accordance with DIN 861/1 denotes a high level of manufacturing precision suitable for routine calibration and comparative measurements; the ceramic block delivers the dimensional stability associated with this grade. Is the Ceramic gauge block 4.5 mm, Grade 1 DIN 861/1 suitable for calibration labs? Yes, the Metav IndustryLine ceramic block (SKU M324.004.5) is appropriate as a short reference standard for laboratory checks, comparator setup and quality control where a compact, stable datum is needed. How should the block be handled to preserve accuracy? Handle the block with clean gloves or tweezers, avoid unnecessary contact with measuring faces, keep it free of grit and store it in a dry, temperature‑stable case when not in use to preserve the measuring faces and dimensional accuracy. Does ceramic resist corrosion and wear compared with steel blocks? Ceramic offers superior corrosion resistance and high surface hardness, which improves wear performance in many workshop and inspection environments compared with untreated steel. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic material, Grade 1 conformity and a compact 40 mm nominal length for a stable length standard in both workshop and calibration environments. Order the article directly via Metav Werkzeuge or consult the sales team for suitability and delivery options. Metav IndustryLine Ceramic gauge block M324.040 — 40 mm, Grade 1 DIN 861/1 A Ceramic gauge block 40 mm, Grade 1 DIN 861/1 designed as a stable reference for length checks, assembly setting and calibration procedures in industrial metrology Ceramic construction for thermal stability Grade 1 accuracy to DIN 861/1 Nominal length 40 mm for compact standards Low weight 0.076 kg for easy handling Stable reference where dimensional consistency matters The ceramic composition of this precision block provides notably low thermal expansion compared with many metals, which translates into reduced length variation when ambient temperature shifts occur. As a result, this compact 40 mm reference offers consistent repeatability for short-range comparisons and quick checks on production rigs. The use of ceramic also contributes to excellent wear resistance, so the standard maintains its form through repeated contact with measuring anvils. Accuracy and conformity that support routine calibration Manufactured to Grade 1 according to DIN 861/1, this precision block fulfils an established industrial standard for gauge blocks and length references. Compliance with the standard supports traceable measurement processes and simplifies documentation in quality workflows. The small footprint of this block makes it suitable as a bench-top reference in inspection stations, where a reproducible nominal length is required for functional tests and gauge comparisons. Practical advantages for the workshop and metrology lab The compact format and light weight (0.076 kg) facilitate rapid placement during inspection routines and reduce the mechanical load on fixtures and holders. The non-metallic surface minimises the risk of corrosion and avoids galvanic interactions when used near sensitive parts; this makes the block a practical choice for mixed-material environments. Supplied as a single, robust length standard, it integrates well into calibration sets or as a standalone control artefact for process monitoring. Reliability, provenance and after-sales transparency Sourcing this precision block from a European quality filter like Metav strengthens supply-chain reliability for small and medium-sized workshops. The brand’s experience in metrology distribution underpins consistent stock availability and clear delivery channels across Europe. For users requiring additional documentation or integration advice, Metav Werkzeuge offers consultancy and product guidance tailored to industrial measurement tasks. For traceable, thermally stable length standards, request the Metav IndustryLine ceramic gauge block M324.040 through Metav Werkzeuge to ensure consistent checks and dependable delivery across the European market Technical Data Article number: M324.040 GTIN: 4054469143408 Tariff number: 90173000 Facts Nominal length: 40 mm Weight: 0.076 kg Classification: Grade 1 Special features Material: Ceramic Compliance: DIN 861/1 Category: Endmasse / Gauge block ECLASS: 21170108 FAQ What is the intended use of this ceramic gauge block? The ceramic gauge block M324.040 serves as a stable short-length reference for length checks, functional setting and verification tasks in inspection benches and calibration routines. Does the block meet recognised standards for accuracy? Yes, the product conforms to Grade 1 under DIN 861/1, offering an industrially recognised level of precision for gauge blocks. Can this block be used in environments with temperature variation? The ceramic construction of the block reduces thermal expansion compared with many metal standards, making it well suited to situations where small ambient changes occur. Is the block suitable for integration into a calibration set? The compact 40 mm format and low weight make the block convenient for inclusion in calibration kits or as a standalone reference on inspection tables. Which items identify this article for ordering and stock checking? Use the article number M324.040 and GTIN 4054469143408 when referencing the Metav IndustryLine ceramic gauge block. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650 - Metav IndustryLine
Benefit from DIN EN ISO 3650 Grade 0 accuracy combined with a hardened special-steel construction and a compact 40 mm nominal length for reliable reference measurements; order the single gauge block 40 mm directly via Metav Werkzeuge or contact our consultants for tailored advice. Single gauge block 40 mm — Grade 0 precision, DIN EN ISO 3650 (Metav IndustryLine) The single gauge block 40 mm is a high-precision reference standard for calibration and inspection tasks in dimensional metrology, suitable for laboratories and workshop inspection benches. DIN EN ISO 3650, Grade 0 accuracy Hardened special steel construction Nominal length 40 mm reference standard Cross-section 35 x 9 mm for stable handling Consistent traceability and measurement confidence The block is manufactured to DIN EN ISO 3650 tolerances at Grade 0, delivering a reference that supports tight dimensional control in production and inspection processes. As a calibrated length standard, the unit reduces uncertainty in comparative measurements and provides a stable baseline for routine checks. The hardened special-steel composition offers wear resistance and long-term stability, so the reference surface maintains its geometry under frequent use. For workshops seeking reproducible results, this reference standard contributes directly to process reliability and reduced rework. Practical form factor for repeatable handling With a nominal length of 40 mm and a compact 35 x 9 mm cross-section, the block balances reach and rigidity, making it easy to handle while keeping bending and torsion minimal. The modest mass supports secure placement in gauge sets or on inspection fixtures without introducing handling-related error. The compact profile also simplifies storage and set configuration, enabling faster setup during series checks. These tangible benefits reduce cycle time on routine inspections and help maintain a consistent quality flow on the shop floor. Integration into calibration routines and inspection chains Designed as a single reference element, the block serves as a primary or supplementary standard for comparative calibration, master checks and fixture verification. The defined tolerances and standard-compliant manufacture mean it is suitable for use in traceable measurement chains and for establishing baseline accuracy in gauge sets. The robust finish supports repeated contact with comparators and feeler gauges while limiting surface degradation. For procurement and quality teams, the gauge block provides a clear, standards-based component to underpin measurement assurance programmes. Contact Metav Werkzeuge for expert guidance on integrating this Metav IndustryLine 40 mm reference standard into existing calibration workflows or to request detailed specifications from our Emmerich-based quality team. Technical data Article number: M319.400.0 GTIN: 4054469132204 Category: Gauge blocks (End measures) Facts Nominal length: 40 mm Weight: 0.098 kg Cross-section: 35 x 9 mm Tariff code: 90173000 Design / Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Manufacturer: Metav IndustryLine FAQ What level of accuracy does this gauge block offer? The block is manufactured to DIN EN ISO 3650 and specified as Grade 0, providing a high-precision reference suitable for demanding inspection tasks. Is the material suitable for long-term use in a workshop environment? Yes; the hardened special-steel construction of the Metav IndustryLine single gauge block ensures wear resistance and dimensional stability under routine handling. Can this block be used as a master for fixture checks? Indeed — the 40 mm reference length and Grade 0 tolerance make the block appropriate as a master standard for fixture verification and comparative checks. Which cross-section applies to this 40 mm size? For the 40 mm nominal length the applicable cross-section is 35 x 9 mm, providing the rigidity expected for this size class. How is the product identified for ordering or stock management? The product is listed under article number M319.400.0 and GTIN 4054469132204 for unambiguous ordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a hardened special steel construction and Grade 1 conformity to DIN EN ISO 3650 for a stable, repeatable length reference; order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. End gauge 40 mm (DIN EN ISO 3650, Grade 1) — Metav IndustryLine The End gauge 40 mm is a hardened precision length reference designed for workshop and laboratory calibration, inspection and routine dimensional verification. 40 mm nominal gauge block Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel construction Suited to calibration and inspection tasks Reliable reference for routine calibration The End gauge 40 mm serves as a compact, reproducible reference for everyday length checks and comparator setups. Conforming to DIN EN ISO 3650 and produced as Grade 1, this reference element supplies a stable benchmark that supports reproducible results across routine inspection cycles. The nominal 40 mm size makes the unit convenient for calibrating small fixtures, setting micrometre standards and verifying machine-mounted measuring systems without occupying excessive bench space. By relying on a standardised gauge, traceable dimensional checks become simpler to document and compare over time, contributing to consistent quality control. Workshop-ready durability and practical handling Constructed from hardened special steel, the gauge block is designed to resist wear and maintain its measuring face integrity under typical workshop use. The compact cross-section (30 x 9 mm up to 10 mm, 35 x 9 mm beyond) yields a favourable stiffness-to-weight ratio while keeping handling straightforward; the listed weight of 0.098 kg reflects the unit’s manageable mass for frequent use. These mechanical properties mean the reference can be used directly at the bench or in inspection fixtures with minimal risk of deformation, supporting reliable repeatability and reducing the need for frequent replacement. Traceability and integration into quality processes The unit is supplied with clear identification (GTIN and SKU) and a customs tariff number for inventory and logistical clarity. As a standardised reference to DIN EN ISO 3650, the gauge block integrates readily into existing calibration plans and documentation regimes, facilitating audit trails and process stability. Using a recognised Grade 1 reference helps laboratories and workshops demonstrate consistent measurement practice and supports corrective actions when deviations are detected. Practical benefits include faster setup times for comparators and reduced uncertainty in routine dimensional checks, which together improve throughput and product conformity. For a reliable Grade 1 length reference from Metav IndustryLine, request a quote or technical consultation through Metav Werkzeuge — our advisers in Emmerich will help determine how this 40 mm gauge fits into existing calibration procedures Technical data Article number: M319.400.1 GTIN: 4054469132211 Manufacturer: Metav IndustryLine Facts Nominal size: 40 mm Weight: 0.098 kg Grade: 1 Customs tariff number: 90173000 Special features Material: hardened special steel Standard: DIN EN ISO 3650 Cross-section: up to 10 mm → 30 x 9 mm; from 10.1 mm → 35 x 9 mm FAQ What accuracy class is this gauge supplied in? This end gauge is supplied as Grade 1 in accordance with DIN EN ISO 3650, providing a high-precision reference suitable for routine inspection and calibration tasks. What material is the gauge made from? The gauge block is manufactured from hardened special steel, chosen for wear resistance and dimensional stability in workshop environments. How is the product identified for ordering and stock control? Identification for ordering and inventory is via SKU M319.400.1 and GTIN 4054469132211 for the Metav IndustryLine 40 mm end gauge. Can the gauge be used directly in comparator setups? Yes; the compact 40 mm nominal size and rigid cross-section make the unit well suited for comparator setups and small-fixture references. Which standard does this gauge comply with? The unit complies with DIN EN ISO 3650, Grade 1, ensuring compatibility with standardised calibration and inspection procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Gauge Block Set Grade 0 DIN EN ISO 3650, Hardened Special Steel, 35x9mm - Metav IndustryLine
With DIN EN ISO 3650 Grade 0 accuracy, a 400 mm nominal length and a rigid 35×9 mm profile in hardened special steel, this end measure provides a stable reference for repeatable inspections and assembly checks. Benefit from a compact, workshop-suitable length standard that supports consistent production tolerance control. Order the end measure directly via Metav Werkzeuge or ask our consultants if needed. End measure 400 mm, DIN EN ISO 3650, Grade 0 — End measure by Metav IndustryLine in hardened special steel End measure 400 mm, Grade 0 is a calibrated-length reference designed for medium-range dimensional inspection and traceable quality checks in production and inspection areas. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction 400 mm nominal length for medium assemblies Compact 35×9 mm profile for high stiffness Accurate reference for reliable process control The Grade 0 classification according to DIN EN ISO 3650 guarantees a narrow tolerance band suitable for demanding inspection tasks and calibration work. As a precision length standard, this instrument reduces measurement uncertainty during go/no-go checks and helps maintain consistent part quality across production runs. The standardized tolerance class simplifies comparison with other certified gauges and supports documented quality workflows. Robust design that keeps measurements reproducible Constructed from hardened special steel, the gauge combines wear resistance with dimensional stability, so contact wear has minimal influence on long-term accuracy. The slender 35×9 mm cross-section delivers a high stiffness-to-weight ratio, helping to avoid sagging across the nominal span. With a nominal length of 400 mm, the tool is classified as a medium-range device (suitable for assemblies that require more reach than bench gauges but remain manageable by a single operator), offering a balance between reach and handling. Built for inspection routines and traceability Integration into inspection protocols is straightforward thanks to the conformity with DIN EN ISO 3650, which aids auditability and interchangeability in inspection equipment inventories. The gauge’s compact mass supports repeatable positioning and quicker cycle times when used as a reference in fixture set-ups or calibration benches. Product identifiers and standards ensure clear traceability for documentation and internal quality records, strengthening process confidence across production and quality assurance functions. Contact Metav Werkzeuge for tailored advice and secure the Metav IndustryLine End measure 400 mm (Grade 0) for precise, repeatable length standards delivered from Emmerich to the workshop. Technical data Article number: M320.400.0 GTIN: 4054469132488 Nominal length: 400 mm Weight: 1.5 kg Facts Cross-section: 35×9 mm Tariff number: 90173000 Tolerance grade: 0 Standard: DIN EN ISO 3650 Special features Material: special steel, hardened Category: End measures / length standards Brand: Metav IndustryLine FAQ What accuracy does Grade 0 offer for this end measure? Grade 0 in accordance with DIN EN ISO 3650 denotes a very tight tolerance band suitable for high-precision inspection; the End measure 400 mm (Grade 0) is intended where narrow limits and repeatable references are required. Is this instrument suitable for workshop inspection of medium assemblies? Yes, the 400 mm nominal length places the gauge in the medium-range class, making the End measure 400 mm (Metav IndustryLine) suitable for dimensional checks on medium-sized fixtures, housings and assemblies. What material and surface treatment are used? The End measure 400 mm is made from special steel, hardened, offering wear resistance and dimensional stability during repeated use. Does the product description indicate factory calibration? The provided product information does not indicate a factory calibration certificate; calibration status is not specified for the End measure 400 mm. How should the length standard be handled and stored to preserve accuracy? Handle the end measure with care, avoid shock and surface contamination, store it clean and dry in a protective environment and keep it separate from magnetic or abrasive items to preserve dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Gauge Block Set Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a stable, grade‑certified reference that combines DIN EN ISO 3650 Grade 1 accuracy with robust, hardened construction for repeatable length checks. The 400 mm nominal length and compact 35 x 9 mm cross‑section provide a practical balance of reach and stiffness for workshop and fixture verification. Order the end gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 400 mm, Grade 1 (DIN EN ISO 3650) by Metav IndustryLine an End gauge 400 mm, Grade 1 (DIN EN ISO 3650) serving as a precision length reference for workshop verification, calibration tasks and production quality control DIN EN ISO 3650, Grade 1 accuracy Hardened special steel construction Compact cross-section 35 x 9 mm Nominal length 400 mm, stable reference Stable, standardised reference for inspection and calibration The end gauge 400 mm is manufactured to DIN EN ISO 3650 and supplied as a Grade 1 length standard, making it suitable as a reference part for comparative checks and routine verification. Grade 1 classification signals a high level of dimensional fidelity under the applicable standard; the result is a reliable benchmark for checking measuring instruments, setting up gauging devices or validating production jigs. The clearly defined nominal length supports traceable documentation and reproducible inspection procedures in a production environment. Medium-range design that balances reach and rigidity This length falls into the medium measurement class (300–500 mm), which is the practical sweet spot for many tooling and assembly tasks. At 400 mm the gauge offers greater reach than short workshop references while remaining sufficiently stiff to avoid undue deflection. The compact 35 x 9 mm cross‑section reduces bending without adding excessive mass, so handling and fixture placement remain straightforward during on‑bench or bench‑mounted checks. The geometry thus improves repeatability for components such as fixtures, housings and medium-sized machined parts. Hardened construction for long service life and low uncertainty Made from hardened special steel, the bar resists wear and surface damage that would otherwise degrade measurement certainty. A robust surface and thermal stability reduce the drift that can occur with softer materials, so intervals between verification cycles can be optimised. The construction reduces the influence of contact marks and abrasion on the reference faces, which in turn helps to maintain a low measurement uncertainty during comparative use in production or quality departments. Practical integration into quality processes The gauge integrates directly into standard workshop workflows as a fixed reference for caliper checks, fixture set‑up and routine inspection cycles. The solid construction and clear standard designation simplify internal documentation: the bar can be recorded as the reference for in‑house checks and routine acceptance tests. When used alongside established control plans, the reference bar helps to accelerate go/no‑go decisions and supports reproducible measurement outcomes across shifts and operators. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine end gauge can become the fixed reference in your inspection routine — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M320.400.1 GTIN: 4054469132495 Manufacturer: Metav IndustryLine Facts Nominal length: 400 mm Cross-section: 35 x 9 mm Weight: 1.5 kg Tariff code: 90173000 ECLASS: 21170108 Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 1 FAQ What is the intended use of this end gauge? The end gauge is intended as a grade‑certified length reference for inspection, calibration checks and fixture set‑up in workshop and production environments; the 400 mm size is suitable for medium‑range verification tasks. Is the gauge suitable for routine checks of calipers and gauges? Yes — the 400 mm reference can be used to verify calipers, comparator fixtures and other length measuring equipment as part of daily or periodic control procedures. What does Grade 1 mean for this product? Grade 1 denotes the accuracy class under DIN EN ISO 3650; it indicates a high level of dimensional conformity appropriate for workshop and production verification. Can the bar be used in a production environment with repeated handling? The hardened special steel construction is designed to withstand regular handling and use, minimising surface wear and helping to preserve measurement certainty over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Jaw R2×8 mm Holder Mount 9×8 mm Set, - Metav IndustryLine
Product data inconsistent: the specification for the measuring tip radius is contradictory (label shows R2 x 8 mm while the messspitzen field lists R2.5 x 8 mm). This discrepancy creates confusion and prevents the generation of a reliable product description. Accurate and consistent specifications are essential for ensuring clarity and trustworthiness in product documentation. Until the measurements are verified and corrected, the product description cannot be finalised. Please review the provided data, correct the specification, and resubmit the updated information. Resolving this issue promptly will help avoid further delays and ensure the accuracy of the product details moving forward.
41.3/131.4/243.5/281.2 mm Calibration Set For Calipers With 4+25 mm Setting Ring, Grade 1 - Metav IndustryLine
Take advantage of Grade 1 accuracy together with hardened special steel construction and a complete set of end gauges plus setting rings for reliable in‑house verification. The kit ships in a protective transport case for safe storage and transport; order the calibration set directly via Metav Werkzeuge or consult our specialists if advice is needed. Calibration set for calipers M318.207.N — Grade 1 end gauges with setting rings The Calibration set for calipers M318.207.N is a workshop calibration kit comprising precision end gauges and setting rings for the traceable verification of vernier, dial and digital calipers in inspection and production environments. Grade 1 accuracy per DIN EN ISO 3650 Aged, hardened special steel construction Includes setting rings 4 mm and 25 mm Supplied in protective transport case Reliable traceability for workshop quality control This calibration kit provides traceable reference lengths designed for routine checks and adjustment of measuring callipers. Supplied as a matched set of end gauges plus a pair of setting rings, the components support consistent verification of zero points and span across common workshop ranges. Conformity with DIN EN ISO 3650 and VDI/VDE/DGQ 2618 ensures that the set meets established industry tolerances, enabling documented quality control and repeatable measurement procedures without ambiguity. Robust materials that withstand regular use Manufactured from special steel, which is aged and hardened, the gauges combine wear resistance with stable dimensional behaviour under normal workshop conditions. The material choice and heat treatment reduce surface deformation during regular handling, preserving the gauge geometry that underpins reliable calibration. The set’s protective transport case protects the components from contamination and mechanical damage during storage or transfer, helping to extend service life and maintain measurement confidence. Practical kit layout for efficient calibration workflows The set contains precisely matched end gauges in practical intermediate sizes and an additional pair of setting rings (4 mm and 25 mm) for rapid span checks and fine adjustment. The compact arrangement supports quick verification routines at the machine or in the inspection area, reducing downtime and improving throughput. As a Grade 1 reference kit, it is suited for workshop and industrial inspection tasks where standardised, reproducible checks are required before and during production. Contact Metav Werkzeuge today for supply options, bespoke advice and fast delivery from Emmerich — our team can recommend the right reference set for specific verification needs Technical data Article number: M318.207.N SKU: M318.207.N GTIN: 4054469128092 Tariff number: 90173000 Facts Grade: 1 Number of pieces: 6 Included lengths: 41.3 / 131.4 / 243.5 / 281.2 mm Setting rings: 4 mm and 25 mm Weight: 2.6 kg Special features Material: Special steel, aged and hardened Standards: DIN EN ISO 3650; VDI/VDE/DGQ 2618 Supplied in transport case Category: End gauges FAQ What is the intended use of this calibration kit? The set is intended as a grade‑1 reference for the verification and adjustment of vernier, dial and digital calipers; it is a matched collection of end gauges with setting rings for workshop and inspection checks. Does the kit include a storage or transport container? Yes, the M318.207.N set is supplied in a protective transport case to prevent contamination and mechanical damage during handling and storage. Which standards does the kit conform to? The components conform to DIN EN ISO 3650 and VDI/VDE/DGQ 2618, making the set suitable for standardised verification procedures within workshops and inspection units. Is the material suited to frequent workshop use? The gauges are made of special steel, aged and hardened, chosen for wear resistance and dimensional stability during repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
41.3mm Ceramic Gauge Block For Calibrating Calipers Grade 1, DIN EN ISO 3650/1 - Metav IndustryLine
Take advantage of the Grade 1 accuracy and the dimensional stability of a ceramic standard to keep verification routines fast and reliable; order the calibration reference directly via Metav Werkzeuge or consult the product specialists for matching verification accessories. Ceramic end standard 41.3 mm, Grade 1 — calibration gauge (Metav IndustryLine) A ceramic end standard designed for precise verification of calipers and micrometres in laboratory and workshop settings. 41.3 mm nominal length for dimensional checks Grade 1 accuracy according to DIN EN ISO 3650/1 High-stability ceramic construction for low thermal drift Intended for caliper and micrometre calibration Precision that speeds up routine checks The 41.3 mm ceramic end standard provides a compact reference that simplifies frequent verification tasks. As a Grade 1 gauge it meets the geometric and dimensional tolerances defined in DIN EN ISO 3650/1, which reduces uncertainty during routine checks and shortens inspection cycles. The compact format and stable reference value make verification of sliding callipers and small micrometres quicker, supporting efficient quality control without compromising traceability. Material advantages for consistent outcomes Made from ceramic, the standard offers superior thermal stability and wear resistance compared with many metallic references. Ceramic’s low coefficient of thermal expansion limits length variation with temperature changes, so repeat measurements remain consistent in typical workshop conditions. The result is fewer re-measurements, lower risk of drift-related errors and a tangible improvement in throughput for calibration benches and incoming inspection stations. Practical handling and workshop integration The compact reference length is easy to handle and integrates smoothly into measurement routines and audits. The gauge’s nominal size suits verification of small to medium measuring tools, allowing quick in-line checks on production or during maintenance. Where instrument reproducibility matters, this end standard supports clear pass/fail decisions and helps maintain confidence in measurement processes while conserving bench time. For procurement or technical advice on matching accessories and traceable standards, contact Metav Werkzeuge in Emmerich to request the Ceramic end standard M318.204.1 and tailored verification guidance Technical data Article number: M318.204.1 GTIN: 4054469158051 ECLASS: 21170109 HS tariff code: 90173000 Facts Nominal length: 41.3 mm Material: Ceramic Grade: 1 Weight: 2.6 kg Standard: DIN EN ISO 3650/1 Special features High thermal stability Low wear and long-term dimensional stability Compact format for fast verification of calipers and micrometres FAQ What tolerance class does this end standard meet? The ceramic end standard is specified as Grade 1 in accordance with DIN EN ISO 3650/1, providing a well-defined tolerance band suitable for routine verification. Which measuring instruments can be checked with this gauge? This 41.3 mm ceramic reference is intended for verification of sliding calipers and small micrometres, serving as a compact calibration reference for workshop and laboratory inspections. Why choose a ceramic reference over a steel one? Ceramic offers lower thermal expansion and greater wear resistance, which yields more consistent lengths under changing temperatures and extended service life compared with many steels. Is the calibration status included with the product as supplied? The product is delivered as a Grade 1 end standard compliant with DIN EN ISO 3650/1; the available data does not specify a traceable calibration certificate as part of the standard supply. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
41.3mm Gauge Block Calibration Standard Grade 1, DIN EN ISO 3650/1 - Metav IndustryLine
Take advantage of a compact, workshop-ready gauge block that combines Grade 1 conformity and a stable 41.3 mm reference length to keep caliper verification efficient and reproducible. Order directly via Metav Werkzeuge or consult the team for specification guidance and delivery options. End gauge for calibration of calipers 41.3 mm, Grade 1 (Metav IndustryLine) End gauge for calibration of calipers 41.3 mm, Grade 1 provides a compact, traceable reference for routine verification of workshop measuring instruments and in-process inspection. Grade 1 accuracy per DIN EN ISO 3650/1 Nominal length 41.3 mm Special-steel construction Mass 2.6 kg for stable reference Reliable reference for routine caliper verification The Grade 1 reference block is designed as a concise verification standard for hand-held vernier and digital calipers. With a 41.3 mm nominal length conforming to DIN EN ISO 3650/1, the block offers a reproducible check point that supports documented quality routines. Using a compact reference reduces downtime for incoming inspections and spot checks while providing a clear numerical baseline for deviation assessment. The design focuses on a single, highly stable dimension so that verification remains straightforward and comparable over repeated checks. Material choice and physical stability that support repeatable readings Manufactured from special steel, this reference block combines dimensional stability with surface durability to withstand regular use in workshop and inspection environments. The relatively high mass (2.6 kg) contributes to a steady contact during measurement, reducing the risk of displacement when a caliper’s jaws are applied; this improves repeatability without elaborate fixturing. Where traceable comparators are not available, a robust steel reference like this minimises handling variables and supports consistent results across multiple operators. Practical application and workflow benefits for production and QA The block is intended for straightforward use as a calibration and verification aid for calipers: place the measuring faces on the reference, note any deviation and log the result for quality records. This simple procedure helps to detect instrument drift early, preventing rejected parts and rework further down the production line. In both small workshops and larger maintenance departments, the compact format of this reference block simplifies storage and immediate accessibility, contributing to faster inspection cycles and a more reliable measurement regime. For reliable, workshop-ready calibration standards, contact Metav Werkzeuge to source the Metav IndustryLine end gauge (SKU M318.207.1) and ensure consistent verification across measuring equipment. Technical data Article number: M318.207.1 GTIN: 4054469158020 ECLASS: 21170109 Facts Nominal length: 41.3 mm Mass: 2.6 kg Grade: 1 Special features Material: Special steel Standard: DIN EN ISO 3650/1 Category: End gauges Customs tariff number: 90173000 FAQ What is the intended use of this reference block? The reference block is intended for the calibration and verification of calipers and similar two‑point measuring tools, providing a concise measurement standard at 41.3 mm. Which standard does the block comply with? The block conforms to DIN EN ISO 3650/1, specified as Grade 1, ensuring suitability for routine verification tasks in workshops and inspection environments. What material is the block made from and why does that matter? Constructed from special steel, the block offers dimensional stability and wear resistance, which together support repeatable measurements during frequent use. Is the SKU or article number available for ordering? Yes — the article number is M318.207.1 and can be referenced when ordering or requesting further technical information. Can this block be used for laboratory calibration work? The block is suitable as a workshop and inspection reference; for accredited laboratory calibrations, reference to the lab’s scope and calibration certificates is advised to determine suitability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
43 mm Scriber Tip For End Measure Holder 15 mm Point - Metav IndustryLine
Take advantage of a compact marking solution that combines reliable contact geometry and simple replacement for uninterrupted workshop marking. The short, precision tip and low mass ensure repeatable scribing without disturbing the workpiece; order the scribing tip directly via Metav Werkzeuge or ask our consultants if needed. Scribing tip for end-measure holder M317.109 — 43 mm length, 15 mm tip The Scribing tip for end-measure holder M317.109 is a compact accessory for fine marking tasks, designed to fit end-measure holders and to produce consistent scribe lines in demanding workshop and inspection environments. Precision scribing tip for clear marking Length 43 mm for close-up work Tip diameter 15 mm for reliable contact Repeatable marking where accuracy matters The compact scribing tip delivers consistent contact geometry that reduces variability in manual marking operations. The short nominal length ensures a low lever arm and minimal deflection during use, which helps maintain a stable contact force and clean scribe lines. With a defined 15 mm tip and a design optimised for end-measure holders, the component supports reproducible results in layout and inspection work, reducing rework and saving production time. Fast replacement and robust contact for throughput Fitted into standard end-measure holders, the accessory is engineered for quick exchange, so marking tools can be refreshed without extended downtime. The rectangular cross-section (9 x 8 mm) provides a secure fit and prevents rotation in the holder while the slender profile keeps the accessory lightweight, limiting added inertia on the measuring assembly. These attributes increase process uptime and contribute to a steady workflow in repetitive scribing tasks. Integrates with existing metrology setups As an accessory from Metav IndustryLine, the part is intended to complement existing marking and measuring fixtures on the workshop bench. The compact form factor and clear specification make it straightforward to select the correct holder and achieve the expected marking performance. The lightweight construction and precise tip geometry help maintain marking quality across consecutive parts and support efficient inspection routines. For precise marking tasks select the Metav IndustryLine scribing tip M317.109 and contact Metav Werkzeuge for matching holders or application advice. Technical data Article number: M317.109 GTIN: 4054469127392 Label: Scribing tip for end-measure holder L = 43 mm, tip = 15 mm SKU: M317.109 Category: Measuring instruments > Accessories Customs tariff number: 90173000 Facts Weight: 0.01 kg Tip diameter: 15 mm Cross-section: 9 x 8 mm GTIN: 4054469127392 Customs tariff number: 90173000 Special features Accessory for end-measure holders Intended use: scribing / marking Brand: Metav IndustryLine Compact design for low deflection FAQ What is the intended use of this scribing tip? The scribing tip M317.109 from Metav IndustryLine is intended as an accessory for end-measure holders to produce repeatable layout and inspection marks. Which holder fits this scribing tip? The tip is designed for standard end-measure holders with a matching 9 x 8 mm seat; compatibility should be checked against the holder's clamp dimensions. Is the tip suitable for heavy contact or impact marking? The M317.109 is designed for precise scribing and routine workshop marking rather than high-impact chiselling; use accordingly. Can this accessory be used on coated or plated surfaces? Yes, the scribing tip produces defined lines on most metallic surfaces; surface finish and coating thickness will influence the visual result. How is repeatability ensured when using the scribing tip? Repeatability is supported by the compact geometry and stable cross-section, which minimise deflection and rotation in the holder and therefore maintain consistent marking lines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45 x 15 mm Plain Glass Surface Plate Flatness 0.1 µm - Metav IndustryLine
Take advantage of the combination of 0.1 µm flatness and a compact 45 x 15 mm format for dependable surface checks and easy handling in the workshop; order the item directly via Metav Werkzeuge or consult our advisors for specification support. Flat glass reference plate, 45 x 15 mm, 0.1 µm — Metav IndustryLine precision standard Flat glass reference plate, 45 x 15 mm, 0.1 µm is a compact inspection standard for quick verification of surface evenness and comparative tests in production and quality control. Ultra-flat 0.1 µm flatness calibration standard Compact 45 x 15 mm format for tight spaces Hardened glass for stable reference surface Reliable metrology: accurate flatness made usable A reference surface with 0.1 µm flatness provides a meaningful reduction in measurement uncertainty for everyday inspection tasks. The high flatness tolerance class means the plate serves as a repeatable benchmark when checking component faces, fixture seats or reference blocks. By using a stable glass reference plate instead of improvised standards, the number of false rejects due to reference error is reduced, which supports leaner quality procedures and fewer corrective operations. The result is faster throughput in inspection loops and a consistent basis for pass/fail decisions. Small footprint, simple handling — benefits for the workshop The 45 x 15 mm footprint and low mass make this reference plate especially suitable where bench space is limited or quick in-process checks are required. The compact format eases positioning on machine tables, in jigs or beside test rigs and avoids excessive edge deflection that can occur with longer gauges. The modest weight supports single-person handling and fast swap-out during batch checks. This shape is therefore ideal for tight-tolerance components and short-run quality inspections where agility and reproducibility matter. Practical application and why Metav IndustryLine is a dependable choice Designed as a reference for surface flatness checks, the glass plate integrates directly into established inspection routines: lay the plate on the test surface, use feeler gauges or optical comparators to detect deviation, or apply it as a comparative datum for surface-parallel tests. The product is part of Metav IndustryLine’s measured offering and benefits from the company’s supply reliability and quality filter in Emmerich. Metav’s broad portfolio and experienced advisory service simplify procurement and technical matching for shop floors and laboratories alike, supporting a smooth introduction of precision standards into daily workflows. Choose the Metav IndustryLine flat glass reference plate for trustworthy, repeatable surface verification — contact Metav Werkzeuge for technical guidance or procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M318.222 GTIN: 4054469128177 Category: Parallelunterlagen Label: Planglas, 45 x 15 mm Genauigkeit 0,1 um Manufacturer: Metav IndustryLine Facts Dimensions: 45 x 15 mm Thickness: 12 mm Flatness: 0.1 µm Weight: 0.2 kg Customs tariff number: 90173000 Special features Glass reference plate for surface flatness testing Compact format for bench and in-process checks Suitable as a comparative inspection standard FAQ What is the intended use of this flat glass reference plate? The flat glass reference plate is intended for verification of surface evenness and as a comparative reference in routine inspection tasks; it provides a stable, ultra-flat datum for checking component faces and fixture seats. How precise is the plate and what does 0.1 µm mean in practice? The plate is rated to 0.1 µm flatness, which indicates an extremely low deviation across the reference surface and supports reliable, repeatable checks in precision workshop and metrology settings. Can the plate be used as a primary calibration standard? The plate is designed as a reference for comparative measurements and in-process verification; for primary calibration duties, reference to an accredited calibration laboratory and appropriate certificates is advised. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Centring Tip For Gauge Holder Ø8x8 9x8 Shank - Metav IndustryLine
Take advantage of precise centring and compact mounting to speed up inspection cycles while keeping fixture changeover simple; order the accessory directly via Metav Werkzeuge or consult our specialists for compatibility advice. Centre Point M317.110 – End-gauge Holder Accessory with Ø8 x 8 mm Measuring Tips The Centre Point M317.110 is a precision alignment accessory for end-gauge holders, engineered to provide reproducible centring for compact inspection setups and small-diameter part checks. Precision Ø8 x 8 mm measuring tips Compact 45 mm mounting for tight fixtures Low weight 0.01 kg for minimal inertia Compatible with end-gauge holder interfaces Accurate centring for repeatable inspections The M317.110 serves as a dedicated centring pin that transforms a holder into a repeatable inspection fixture. With Ø8 x 8 mm measuring tips and a defined 45 x 9 x 8 mm mounting, it reduces variability when locating small bores or external diameters. The clearly specified mounting dimensions ensure predictable alignment with modular holders, which shortens set-up time and improves throughput in batch inspection. This focused design supports faster decision-making on the shop floor by lowering measurement scatter and reducing rework. Compact mounting that fits tight fixtures A short overall length of 45 mm and a narrow cross-section of 9 x 8 mm make this alignment tip well suited to confined workspaces and stacked fixturing. The low mass (0.01 kg) minimises added inertia and helps keep the measuring system stable during manual handling. For workshops where space is at a premium, the compact geometry allows close tool staging and easier access to surrounding features, enabling simpler integration into existing inspection jigs without extensive modification. Traceability and procurement-friendly identification The accessory is clearly identifiable for inventory and quality processes: GTIN and SKU data are provided to streamline ordering and stock management. Its role as an accessory for end-gauge holders makes it straightforward to catalogue as a spare part or calibration fixture. The combination of precise tip diameter and standardised mounting supports consistent replacement practices, which contributes to uninterrupted inspection routines and predictable spare-part provisioning across production sites. Contact Metav Werkzeuge to discuss supplying the Metav IndustryLine M317.110 centre point with Ø8 x 8 mm tips for direct integration into existing end-gauge holders Technical data SKU: M317.110 GTIN: 4054469127408 Description: Centre point for end-gauge holder Ø8 x 8 mm, mounting 45 x 9 x 8 mm Tariff number: 90173000 Facts Length: 45 mm Measuring tips: Ø8 x 8 mm Cross-section: 9 x 8 mm Weight: 0.01 kg eClass: 21170108 Special features Accessory for end-gauge holders Category: Accessories (Measuring devices) Intended use: Centre/align small-diameter checks Manufacturer: Metav IndustryLine FAQ What is the mounting size for this centre point? The mounting dimension is 45 x 9 x 8 mm and the measuring tips measure Ø8 x 8 mm; the article is listed as SKU M317.110 and intended for use with end-gauge holders. Which inspection tasks suit this alignment tip? This accessory is designed for precise centring of small bores and external diameters during dimensional checks, providing reproducible positioning for routine inspection tasks. How is the item identified for procurement and inventory? Identification is supported by GTIN 4054469127408, SKU M317.110 and eClass 21170108 to simplify ordering and stock control. Can this centre point be used in confined fixture layouts? Yes; the compact 45 mm length and slim 9 x 8 mm cross-section make the component suitable for tight assembly and stacked fixturing where space is limited. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Gauge Jaw R5×15, 9×8 mm Shank, Pair - Metav IndustryLine
Take advantage of precise, compact mounting and repeatable contact geometry thanks to the R5 × 15 mm measuring tip, the 45 × 9 × 8 mm shank and the supplied set of two; ideal for quick replacement and minimal setup time. Order the measuring jaw directly via Metav Werkzeuge or ask our consultants if needed. Measuring jaw R5 x 15 mm (shank 45 x 9 x 8 mm) — Metav IndustryLine accessory A compact measuring jaw that provides reliable point contact for small-feature inspection and secure attachment to standard measurement holders in industrial metrology. R5 tip for precise contact 45 × 9 × 8 mm shank for secure mounting Supplied as a set of two Improved repeatability through defined contact geometry The compact measuring jaw delivers a consistently defined contact point thanks to its R5 × 15 mm tip geometry. This profile reduces variation at the point of measurement, making comparative checks and single-point inspections more reliable. For workshop and inspection-room routines, the measured benefit is a reduction in rework and faster pass/fail decisions, because the defined radius simplifies alignment against fillets, grooved features and small diameters. The component is presented as a ready-to-fit accessory, allowing maintenance teams to replace worn tips without recalibrating the entire setup. Compact design for straightforward handling and fast replacement With a nominal length of 45 mm and a low individual mass, the jaws are designed for easy manual handling and quick exchange. The 45 × 9 × 8 mm shank ensures a snug fit in holders that accept rectangular mounting bars, so stability during measurement is retained even under repeated use. Supplied in pairs, the set supports parallel checks or mirrored installations, cutting downtime during tool changes. The compact format is particularly advantageous where space is limited or where fixtures demand short overhangs to preserve rigidity. Practical compatibility for inspection and small-part production Engineered for accessory use within industrial metrology, the jaws suit tasks such as contact probing, step checks and registering against defined edges. The combination of a precise tip radius and a standardised shank cross-section enables easy integration into common holders and gauge adaptors used in machine shops and quality departments. As a Metav IndustryLine accessory, the product contributes to a modular approach: spare parts are simple to stock, individual components are replaced rather than entire assemblies, and measurement workflows remain efficient and predictable. For replacement parts and reliable delivery from Emmerich, contact Metav Werkzeuge for ordering and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav's consultants will advise on fitment and availability Technical Data Article number: M317.107 GTIN: 4054469127378 Tariff number: 90173000 Facts Length: 45 mm Cross-section (shank): 9 × 8 mm Tip geometry: R5 × 15 mm Weight (per piece): 0.01 kg Supplied as: set of 2 Special features Accessory for measuring instruments and holders Compact mounting for short overhangs Defined contact radius for repeatable measurements Designed for workshop and inspection use FAQ What is the mounting size of these measuring jaws? The measuring jaw comes with a 45 × 9 × 8 mm shank suitable for standard rectangular holders and gauge adaptors. Can these jaws be used for small-diameter checks and fillets? Yes, the R5 × 15 mm tip geometry is intended for precise contact on small diameters, grooves and filleted features. Are the jaws supplied individually or as a set? They are supplied as a set of two, which supports parallel checking or quick replacement strategies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47 pcs Ceramic Gauge Block Set Grade 1, DIN EN ISO 3650, Antimagnetic, Supplied In Case - Metav IndustryLine
Take advantage of precise, low‑maintenance reference standards combined with thermal stability for repeatable measurements and secure transport. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic Gauge Block Set M321.471 (Grade 1, DIN EN ISO 3650) by Metav IndustryLine The Ceramic Gauge Block Set provides stable reference standards for calibration tasks in workshops and laboratories, designed for routine dimensional checks and master setting applications. Grade 1 accuracy to DIN EN ISO 3650 Antimagnetic ceramic construction Stable dimensions up to 100 mm Delivered in protective transport case Consistent accuracy for reliable reference measurements Gauge blocks are fundamental as reference standards for setting measuring instruments and checking device accuracy. This Grade 1 set complies with DIN EN ISO 3650, ensuring defined tolerances for routine calibration tasks. The blocks are made from ceramic, a material chosen for its low thermal expansion and high wear resistance; this reduces drift during short‑term temperature changes and extends service life compared with softer materials. The antimagnetic nature further eliminates magnetic distortion during contact measurements, providing a stable basis for traceable dimensional work. Practical design that supports workshop workflows The collection covers lengths up to 100 mm and is shaped with cross‑sections optimised for stiffness and handling; smaller sizes maintain reduced mass while longer blocks provide reach without sacrificing stability. Delivered in a robust protective transport case, the set is suitable for mobile inspection or secure workshop storage. Maintenance is minimal: the blocks are specified as antimagnetic and pre‑treated so that the usual degreasing before use and oiling after use are not required, simplifying preparation and reducing handling steps while preserving measurement integrity. A pragmatic choice from a trusted supplier As part of the Metav IndustryLine, this ceramic set combines workshop practicality with industrial standards. Choosing these reference blocks supports efficient quality routines and reduces downtime during instrument set‑up or batch control. Metav’s established distribution from Emmerich ensures reliable supply and direct access to product information and spare parts. For production environments that prioritise reproducibility and simple upkeep, the set provides a cost‑effective way to raise the baseline precision of everyday measurement tasks. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific applications and secure delivery of the Metav IndustryLine ceramic gauge block set M321.471 with Grade 1 traceability from DIN EN ISO 3650 Technical Data Article number: M321.471 GTIN: 4054469132686 Manufacturer: Metav IndustryLine Facts Pieces per set: 47 Material: ceramic Weight: 2.6 kg Max block length: 100 mm Cross-section up to 30 mm: 30 x 9 mm Cross-section from 40 mm: 35 x 9 mm Special features Grade 1 to DIN EN ISO 3650 Antimagnetic No degreasing before use or oiling after use required Delivered in protective transport case FAQ What level of accuracy can be expected from these gauge blocks? The ceramic gauge block set M321.471 is Grade 1 and manufactured to DIN EN ISO 3650, delivering the reproducible tolerances associated with that grade for routine calibration and inspection tasks. Is any special maintenance required for the ceramic blocks? No. The blocks are antimagnetic and treated so that degreasing before use and oiling after use are not necessary, which reduces routine maintenance and handling steps. Can the set be used outside a controlled laboratory environment? Yes. The material properties of ceramic—low thermal expansion and good wear resistance—make this set suitable for workshop and production environments, especially when stored and transported in the supplied protective case. Does the set include a transport case and how are the pieces protected? The set is delivered in a protective transport case that secures each block for mobile inspection and safe storage, helping to maintain the condition of the reference surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47 pcs Precision Gauge Block Set 1.005–100 mm Hardened Special Steel DIN EN ISO 3650, In Plastic Case - Metav IndustryLine
Taking advantage of a hardened special‑steel construction and compliance with DIN EN ISO 3650, this parallel end gauge set delivers repeatable alignment and dimensional control across inspection and assembly tasks; supplied complete in a protective transport case for safe handling — order the set directly via Metav Werkzeuge or consult our specialists for tailored advice. Parallel end gauge set (DIN 861/0) — hardened special steel, precision‑ground Parallel end gauge set (DIN 861/0) for high‑precision spacing, alignment and inspection tasks in workshop and production environments Hardened special‑steel construction Precision to DIN EN ISO 3650 Precision‑ground parallel faces Supplied in protective transport case Reliable, repeatable alignment for inspection and assembly The set of gauge blocks is engineered to ensure consistent parallelism and minimal variation during repeated measurements. Manufactured from hardened special steel, each block is precision ground to the tolerances required by the stated standard DIN EN ISO 3650, which supports traceable results in quality control. The combination of material hardness and precision grinding reduces wear and preserves contact geometry, supplying the stability needed for alignment tasks and fixture setting. Built for workshop handling and long service life A design emphasis on durability means the blocks resist deformation in everyday use. The hardened construction and ground faces limit surface damage and allow secure stacking or shim‑setting without rapid deterioration. Because the set is delivered in a protective transport case, handling and storage are simplified, improving workplace organisation and reducing the risk of accidental damage during transport or on the shop floor. Organised set composition for efficient workflow The collection contains an organised range of thicknesses presented for quick selection and combination; the precise gradation of blocks supports fine adjustment without time‑consuming trial‑and‑error. Clear identification of sizes and a compact case format cut process time during setup and inspection. For shop floors and inspection stations where repeatability and speed matter, the set streamlines measurement routines and reduces setup variability. Contact Metav Werkzeuge for specification checks, calibration options and to procure the Metav IndustryLine parallel end gauge set directly from Emmerich — expert advice is available by phone or email Technical data Article number: M318.470 GTIN: 4054469129082 Tariff number: 90173000 Weight: 2.6 kg Facts Pieces per set: 47 Standard: DIN EN ISO 3650 Material: Special steel, hardened Set type: Parallel end gauge set Special features Precision‑ground parallel faces Protective transport case included Suited for alignment, shimming and inspection tasks Category: End gauge set FAQ Are the blocks manufactured to an international standard? The set is produced to the requirements of DIN EN ISO 3650, ensuring conformity for workshop and inspection use. What material is used for the gauge blocks? Blocks are made from hardened special steel, chosen for wear resistance and dimensional stability. How is the set delivered and organised? The gauge blocks are supplied in a protective transport case to facilitate safe storage and straightforward handling on the shop floor. Is a calibration certificate included with the set? A calibration certificate is not automatically indicated in the product data; please contact Metav Werkzeuge to arrange calibration options or to confirm supplied certification for the specific delivery. Which applications suit this end gauge set? The set is intended for alignment, fixture setup, shimming and dimensional verification where precise, stable parallels are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47pc Carbide Parallel Gauge Set DIN EN ISO 3650, Assorted Sizes, Supplied in Case - Metav IndustryLine
The combination of carbide construction, conformity to DIN EN ISO 3650 and an organised transport case ensures long‑term wear resistance and reliable set‑up across repeat inspections; benefit from durable, standardised parallels for efficient fixture alignment. Order the Carbide Parallel Gauge Block Set M322.471 directly via Metav Werkzeuge or ask our consultants if needed. Carbide Parallel Gauge Block Set M322.471 — 47-piece, DIN EN ISO 3650 The Carbide Parallel Gauge Block Set M322.471 is a precision alignment set designed for fixture set‑up, inspection benches and shop‑floor toolmaking, delivering standard‑compliant parallels for repeatable measurements Carbide construction for long-term wear resistance Conforms to DIN EN ISO 3650 standard Precision ground for reliable alignment Supplied in transport case for safe storage Consistent precision where it matters Accuracy is the primary concern when aligning jigs, setting up vises or checking run‑out. The gauge blocks in this set are precision ground and manufactured from carbide, which reduces wear and dimension drift during repeated use. Compliance with DIN EN ISO 3650 provides a recognised quality baseline, so measurement traces and setup procedures remain consistent across shifts and locations. This predictable behaviour shortens setup times and reduces rework, directly supporting productivity goals on the shop floor. Durability that reduces lifecycle costs A hard‑wearing material such as carbide significantly extends the service life of parallels compared with softer metals. The result is fewer replacements and more stable reference surfaces over time, which lowers total cost of ownership for inspection and tooling departments. The robust construction also tolerates routine handling and light impacts during transport, so investments in high‑precision tooling deliver sustained returns without frequent recalibration or refurbishment. A practical set for alignment and inspection tasks Supplied as a complete set, the parallels are arranged to cover common alignment and setup needs in machine shops and quality control. The organised configuration simplifies the selection process during fixture preparation and speeds repetitive tasks. A compact, complete set helps maintain a tidy working area and supports systematic procedures in assembly, inspection and maintenance operations, improving both efficiency and workplace ergonomics. Safe transport and traceable conformity The set is supplied in a purpose‑made transport case to protect the components in transit and storage, preserving the ground surfaces and reducing downtime due to damage. Traceability is supported through the standard reference: DIN EN ISO 3650, which facilitates documentation in quality systems. For procurement and stock control the set is listed with its SKU and GTIN, allowing straightforward integration into inventory processes and ensuring the right reference parts are used across multiple sites. For reliable, standard‑compliant parallels and professional advice, contact Metav Werkzeuge to check availability or request guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M322.471 GTIN: 4054469132723 Material: Carbide Standard: DIN EN ISO 3650 Set: 47 pieces Facts Pieces per set: 47 Weight: 3.7 kg Customs tariff number: 90173000 Contents (sizes): 1x1,005 / 20x1,01–1,2 / 7x1,3–1,9 / 9x1–9 / 10x10–100 Special features Precision ground parallels Carbide for wear resistance Supplied in transport case (plastic or wooden) Suitable for fixture alignment and inspection FAQ What applications are these parallels designed for? The gauge set is intended for fixture set‑up, alignment, bench inspection and general toolroom use; the Carbide Parallel Gauge Block Set M322.471 supports repeatable reference surfaces for these tasks. Does the set comply with an industrial standard? Yes, the set is manufactured to DIN EN ISO 3650, which is stated for the Carbide Parallel Gauge Block Set M322.471 and assists with quality documentation and audit requirements. How does the carbide material benefit everyday use? Carbide offers superior wear resistance compared with softer steels, so the parallels in this set keep their dimensions and surface quality longer, reducing maintenance and replacement frequency. Is the set supplied ready for use and protected in transit? The parallels are supplied in a transport case to protect finished surfaces during handling and storage, preserving alignment accuracy for immediate use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47x10-100mm Parallel Gauge Block Set 47 Pieces, Hardened Special Steel, DIN EN ISO 3650, Wooden Case - Metav IndustryLine
Take advantage of a compact, standards-compliant set that combines durable hardened steel, a comprehensive size range up to 100 mm, and safe transport in a protective case for reliable shop-floor and laboratory use; order directly via Metav Werkzeuge or request bespoke advice from our consultants. Parallel gauge block set M318.471 — 47-piece, hardened special steel (DIN EN ISO 3650) by Metav IndustryLine Parallel gauge block set designed for precision stacking, setting gauges and verification tasks in production and inspection environments 47 precision blocks in set Hardened special steel construction Standards-compliant to DIN EN ISO 3650 Supplied in protective transport case Reproducible accuracy for calibration and fixture setting The set is engineered to deliver consistent, stackable reference lengths that support repeatable setups and calibration routines. Conformity with DIN EN ISO 3650 ensures interchangeability with other gauge-block systems and provides a clear basis for traceable measurements. The combination of precise nominal sizes and wear-resistant hardened special steel reduces dimensional drift during regular use, which simplifies tolerance control and shortens inspection cycles in both workshop and quality departments. Practical coverage that reduces handling and increases efficiency A total of 47 pieces gives a logical spread of nominal lengths up to 100 mm, enabling rapid assembly of target dimensions without excessive stacking. This range is suitable for setting up fixtures, checking clearances and producing master references for machining tasks. The balanced selection of blocks reduces the need for frequent tool changes, so measurement and setup times fall and throughput improves; the robust material and finish also mean fewer replacements over the tool’s service life. Durable storage and portable protection for everyday use Delivered in a sturdy protective case, the set is ready for secure storage and safe transport between job sites or across the shop floor. The compact overall weight of the set supports simple handling while the hardened steel composition preserves contact surfaces against wear from repeated wringing and stacking. As a result, recalibration intervals are extended and the set maintains its role as a dependable reference in both routine inspections and setup operations. For professional measurement reliability choose the Metav IndustryLine gauge block set and contact Metav Werkzeuge for detailed technical information or a tailored quotation. Technical data Article number: M318.471 GTIN: 4054469129099 Category: Endmasse SKU: M318.471 Facts Weight: 2.6 kg Pieces per set: 47 Maximum block length: 100 mm Standard: DIN EN ISO 3650 Special features Material: Special steel, hardened Delivery: Protective transport case included Standards referenced: DIN 861/1 and DIN EN ISO 3650 Set composition: Sizes from 1.005 mm to 100 mm FAQ What size range does the set cover? The set covers a practical range from approximately 1.005 mm up to 100 mm, supplied as a coordinated selection of precision blocks. Is the set suitable for workshop and laboratory use? Yes, the Metav IndustryLine parallel gauge block set is designed for both shop-floor applications and precision inspection tasks where stable reference lengths are required. What material are the gauge blocks made from? The blocks are manufactured from hardened special steel, chosen for its wear resistance and dimensional stability under normal handling. Does the set comply with recognised standards? The collection complies with DIN EN ISO 3650 and references DIN 861/1, ensuring compatibility with other standard gauge block systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47x10–100mm Ceramic Gauge Block Set Grade 0, Antimagnetic, DIN EN ISO 3650 - Metav IndustryLine
The combination of ceramic construction, Grade 0 accuracy to DIN EN ISO 3650 and an organised set of reference blocks provides reliable, low‑maintenance dimensional standards for everyday workshop and inspection tasks — order directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic Parallel Gauge Block Set M321.470 — Grade 0 accuracy, up to 100 mm The Ceramic Parallel Gauge Block Set delivers stable, non‑magnetic reference faces for general workshop and metrology use, ideal for routine checks, tool setting and dimensional verification within the standard measurement range. Grade 0 accuracy to DIN EN ISO 3650 Antimagnetic ceramic construction Comprehensive 47-piece organised set Durable transport case included Consistent reference accuracy reduces rework and inspection time Engineered to Grade 0 tolerances and referenced to DIN EN ISO 3650, this ceramic set offers a dependable baseline for comparative measurements and calibration checks. The inherent dimensional stability of ceramic minimises thermal drift compared with many metals, so reference values remain consistent during typical workshop temperature swings. As a result, process control becomes more predictable and the time spent on repeat checks or rework is reduced, improving throughput in daily production and quality assurance routines. Low maintenance, robust handling for everyday workshop use Made from wear‑resistant ceramic and finished with antimagnetic properties, the kit eliminates the need for routine degreasing and re‑oiling before or after use, reducing upkeep and contamination risks. The 47‑piece composition covers a practical size range up to 100 mm, supplied in a protective transport case that organises components for safe storage and rapid retrieval. This combination supports efficient bench work: reference faces are ready for immediate use, handling is simplified and storage protects accuracy between uses. Versatile application across inspection and tool setup tasks The set is suitable for machine shops, fixture workshops and inspection benches that require a standard‑range, high‑quality reference. As parallel gauge blocks, they serve as trustworthy masters for setting calipers, dial indicators and comparative gauges, and for validating measurement instruments. The sturdy cross‑sections and carefully graded sizes make the collection a practical alternative to single‑piece replacements, supporting repeatable setups and a consistent measurement chain in routine production environments. For tailored advice on integrating this Metav IndustryLine ceramic set into existing inspection routines, contact Metav Werkzeuge and request expert guidance or delivery options. Technical data Article number: M321.470 SKU: M321.470 GTIN: 4054469132679 Standard: DIN EN ISO 3650 Tariff number: 90173000 Core data Pieces per set: 47 Weight: 2.6 kg Max block length: 100 mm Special features Material: Ceramic Antimagnetic finish Delivery in durable transport case Cross-section: up to 30 mm → 30 x 9 mm; from 40 mm → 35 x 9 mm Sizes included: 1 × 1.005 mm; 20 × 1.01–1.2 mm; 7 × 1.3–1.9 mm; 9 × 1–9 mm; 10 × 10–100 mm FAQ What accuracy class does the set meet? The set meets Grade 0 accuracy in accordance with DIN EN ISO 3650, providing repeatable reference values suitable for standard workshop and inspection tasks. Which materials are the blocks made from and what advantage does that give? The blocks are manufactured from ceramic, offering excellent dimensional stability, wear resistance and antimagnetic behaviour, which lowers maintenance compared with metallic masters. Is this set suitable for routine machine shop checks? Yes — the configuration and size range (up to 100 mm) make the set well suited for workshop measurement, tool setting and process control tasks where reliable, standard‑range reference blocks are required. Does the product include a calibration certificate? The available product data does not state the inclusion of a calibration certificate with the set. How are the blocks supplied for storage and transport? The collection is supplied neatly organised in a protective transport case to simplify handling, storage and transport between inspection locations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com