Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
8.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 8.2 mm, 135° tip, 5% cobalt-alloyed, HSS‑E, DIN 338 (MetavCUT) A Twist Drill Type N short designed for precision metal drilling with Drilling Machines, offering enhanced stability and wear resistance for demanding workshop tasks. Short design for higher stability 5% cobalt-alloyed HSS‑E for heat resistance 8.2 mm diameter with 135° tip for hard metals Fully ground shank for accurate runout Conforms to DIN 338 for standardised quality Stable drilling in hard materials that reduces vibration and breakage The short design of this drill gives a reduced overhang and therefore higher stability during machining. With an 8.2 mm diameter and a spiral length of 75 mm, the geometry minimises bending forces when used in a Hand Drill or on stationary Drilling Machines. For operations in tougher materials the compact length helps to keep the tool steady, which reduces chatter and the risk of sudden breakage while improving hole accuracy and surface finish. Material choice and cutting geometry for longer tool life Made from HSS‑E and alloyed with 5% cobalt, the drill maintains cutting hardness and heat resistance at elevated temperatures. The 135° tip angle is optimised for penetrating hardened and stainless steels, shortening the initial piercing time and improving centring in the workpiece. The combination of material and geometry makes the tool suitable for alloys and cast iron while preserving cutting edges when proper cooling is applied. Precision manufacture: grinding, runout and compliance This item is produced as a fully ground (HSS‑G) short Twist Drill rather than roll‑formed, which results in very sharp cutting lips and high concentricity. The ground flutes and accurately ground shank improve runout and produce clean bore surfaces, especially important when drilling small diameters in metal. Conformity to DIN 338 ensures the dimensions and tolerances meet recognised standards for short cylindrical shank drills. Who benefits most: applications and working tips Engineers, toolroom technicians and advanced hobbyists working with metal will value the performance of this short Type N drill for precise tasks and for drilling up to depths compatible with a 75 mm spiral length. Use moderate speeds, appropriate cutting fluid and a steady feed to exploit the cobalt alloy’s heat resistance. If drilling non‑ferrous materials or wood, expect less guidance than with specialised wood drills; however the tool can still be used with care for multi‑purpose tasks. We recommend the MetavCUT Twist Drill Type N short for precision metalworking; for individual advice on feeds, speeds or tool selection contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 47082-FDA Diameter: 8.2 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Type: Type N Execution: short Shank execution: fully ground Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill and where does it perform best? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength metals and for larger hole diameters in metalworking; its short design improves stability and precision when drilling steels, castings and non‑ferrous alloys. Which three drill types exist and how does this product fit in? There are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill group and is engineered for use in metalworking applications. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip of a Twist Drill, which lowers friction and the necessary feed force; this also improves centring so the tip starts the hole more accurately in the workpiece. Can a metal Twist Drill be used to drill wood? A Metal drill can be used in Wood, but the guidance is generally poorer and the hole finish may not be as clean; however metal drills are easier to resharpen and tend to have a lower self‑feeding tendency compared to specialised wood bits. For which hole depths is the Twist Drill most commonly used? A full bore into solid material is typically made with a Twist Drill; for diameters up to about 20 mm and drilling depths to around 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are always superior to standard HSS is not universally correct; selection should be based on working conditions and whether the additional cost of HSSE is justified for your specific application.
8.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, 8.2 mm, 135°, HSS‑G, Bright Finished, Fully Ground Shank, DIN 338 The Twist Drill Type N short is a precision metal‑drilling tool for Drilling Machines, offering an 8.2 mm diameter and a 135° tip for reliable penetration in hard materials. Twist Drill Type N, 8.2 mm, 135° tip Short design for higher stability and precision HSS‑G ground for fast drilling and clean holes Sized to machine drilling in metals per DIN 338 Bright finished with fully ground shank Short design increases accuracy and reduces vibration A shorter overall length combined with a reduced overhang provides noticeably higher stability during machining, which is particularly advantageous when working on tough alloys. The compact geometry lowers the tendency to bend or chatter, so operators achieve more consistent hole quality under load. For workshop set‑ups where rigidity matters, the short execution of this tool supports precise centring and smoother feeds. HSS‑G ground geometry for faster, cleaner holes in metal The HSS‑G (ground high‑speed steel) construction yields very sharp cutting edges and excellent roundness, enabling up to 40% faster drilling speeds with significantly reduced feed forces compared with conventional HSS. Combined with the 135° tip geometry, the tool is optimised for harder materials and reduces the risk of workpiece deformation while improving tool life when used with appropriate coolant. Fully ground shank and bright finish for reliable clamping A fully ground cylindrical shank ensures uniform clamping in chucks and holders, minimising run‑out and enhancing concentricity for deeper or repeated bores. The bright finished surface facilitates chip evacuation and inspection, while the compliance with DIN 338 confirms the tool class and dimensional tolerances expected in professional metalworking environments. Best suited for professional metalworking and demanding tasks Engineers and machinists who require robust performance in steel, castings and non‑ferrous metals will appreciate the balance of durability and precision offered by this Type N Twist Drill. The tool is designed primarily for machine drilling operations and excels where repeatable accuracy and clean bore edges are required, for example in toolrooms, maintenance shops and production lines. Choose the MetavCUT Twist Drill Type N short with HSS‑G grind for demanding metal applications — for expert advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45082-FDA Diameter: 8.2 mm Tip angle: 135° Type: Type N Material: HSS-G Execution: short Spiral length: 75 mm Total length: 117 mm Shank finish: fully ground Colour / Finish: bright finished Application: Drills for metal Model series: Standard Line Standard: DIN 338 Shaft execution: geschliffen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications is the Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking operations; it is particularly effective when machining steels, cast irons and other harder materials on Drilling Machines, offering stable performance for precision bores. Can the Twist Drill be used in portable drills? While the Twist Drill Type N is designed for machine drilling, it can be used in Handheld Drilling Machines for lighter tasks; however the short geometry shows its full advantages in rigid, machine‑mounted setups to maintain concentricity and hole quality. For what is Twist Drill used? The Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. This shape is easy to regrind and withstands higher loads. Which 3 drill types exist? There are three principal drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills pointed (regrinded)? Pointing reduces the web thickness at the tip of the Twist Drill. By pointing, frictional forces are substantially lowered so that smaller feed forces are required and the tip centres better in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood but typically gives poorer guidance and a less clean result. However, such drills are easier to resharpen and exhibit less aggressive self‑feeding.
8.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 8.3 mm, 118° tip, HSS, short, black, DIN 338 (MetavCUT) The Twist Drill (Type N) is a short HSS drill bit designed for precision metal drilling with Drilling Machines and workshop hand drills. Short HSS construction for greater stability Conforms to DIN 338 for consistent quality 8.3 mm diameter for standard metal drilling 118° tip for improved centring and faster entry Suitable for Drilling Machine and heavy-duty tasks Reliable stability and precision for metalworking The short HSS design and the reduced overhang provide noticeably higher stability when drilling into metal, reducing bending and chatter. As a Type N normal-spiral bit, this tool excels at creating clean, concentric holes in both unalloyed and alloyed steels; the shorter geometry also improves tool life under repeated loading. For workshop environments where repeatable accuracy matters, the compact length and robust construction translate directly into fewer rejected parts and less rework. Material advantages and tip geometry explained Manufactured from High Speed Steel (HSS) and adhering to DIN 338, the drill combines toughness and heat resistance for typical metalworking tasks. The 118° tip offers a balanced entry characteristic that aids centring on curved or slightly uneven surfaces while keeping cutting forces moderate. In practical terms, this means lower risk of walking at the start of a hole and smoother engagement when used with appropriate cutting speeds and lubrication. The short execution also simplifies regrinding and maintenance. Intended use and suitability for professionals Engineered for the demands of metal drilling, the bit is particularly suitable for production and maintenance tasks in workshops and industrial settings. With an effective spiral length of 75 mm and a total length of 117 mm, the geometry is optimised for machining tasks where rigidity is essential. Users such as fabricators, toolroom technicians and mechanical maintenance teams will value the combination of DIN 338 conformity and the roll-formed HSS production method that balances resilience and resharpenability. Choose the MetavCUT Twist Drill Type N for dependable metal drilling performance — for further technical guidance or to confirm suitability for a specific application contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40083-FDA Diameter: 8.3 mm Spiral length: 75 mm Total length: 117 mm Tip angle: 118° Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black Suitable for: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is used primarily for drilling metal; it is designed to handle alloyed and unalloyed steels, cast iron, non-ferrous metals and certain plastics when appropriate speeds and coolant are applied. Why are Twist Drills sharpened and what benefit does that bring? The tip sharpening reduces the cross-cutting edge at the point of the Twist Drill, which significantly lowers friction and therefore the required feed force; a properly sharpened tip also improves centring and prolongs effective life during production runs. For what is a Twist Drill mainly applied? A Twist Drill is mainly applied to the machining of high-strength materials and large bore diameters; its form allows relatively easy resharpening and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? Commonly distinguished drill types include metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills category. Can a Twist Drill be used to drill wood? The metal Twist Drill can be used in wood, but guidance and finish are typically inferior to dedicated wood bits; metal bits may have worse guidance and a less clean hole, although they are easier to resharpen and have lower self-feeding tendency. At which drilling depths is the Twist Drill most commonly used? A through-hole (solid material) is commonly made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
8.3mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 8.3 mm, 135° tip, short, 5% cobalt-alloyed, HSS‑E, DIN 338, fully ground The Twist Drill Type N is a short HSS‑E metalworking drill designed for precision drilling in hard materials with Drilling Machines. Short design for increased rigidity and precision Fully ground flutes for sharp edges and clean holes 8.3 mm Diameter with 135° tip for hard metals Conforms to DIN 338 for short cylinder‑shank drills 5% cobalt‑alloyed for enhanced heat resistance High‑precision drilling thanks to a short, rigid design The short execution of this Twist Drill reduces overhang and significantly improves stability during machining, which leads to more precise hole geometry and lower runout. For operations in steel and other hard alloys the reduced cantilever length minimises bending forces and vibration, increasing tool life under comparable conditions. This makes the drill particularly suitable where tight tolerances and concentricity are required. Sharp, ground geometry for clean metal holes A fully ground flute geometry produces very sharp cutting edges and high concentricity. The fully ground manufacturing method delivers precise cutting geometry that results in cleaner hole surfaces and consistent diameters when drilling metals. While rolled drills can be tougher, the ground version provides superior finish and dimensional accuracy, especially in demanding stationary or machine‑guided applications. Material choice and tip geometry tailored for hard materials Manufactured from HSS‑E with a 5% cobalt alloy, the drill combines toughness with elevated hot hardness for higher cutting temperatures. The 135° tip angle reduces initial cutting forces and is optimised for hard steels and stainless materials, shortening dwell during entry. For users unfamiliar with tip angles: a larger tip angle flattens the point and spreads cutting load, which helps when penetrating high‑strength materials. Suitable applications and typical working conditions This Type N Twist Drill is intended primarily as a metal drill for use on Drilling Machines and similar equipment, handling alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. Due to its ground geometry, the tool is best used with appropriate coolant and controlled feed to avoid chipping; it excels in precision workshop and production environments where clean, repeatable holes are required. Who benefits from this drill Metalworkers, toolroom technicians and production engineers who require accurate, repeatable holes in harder materials will value the combination of a short gaging length, HSS‑E material and a 135° tip. The design is aimed at users seeking improved stability and hole quality rather than extreme flexibility for long deep drilling; it is therefore particularly well‑suited to machine‑based drilling tasks. For questions about suitability or for additional technical data, consult MetavCUT products and speak to METAV Werkzeuge for personalised advice via info@metav-werkzeuge.com or by phone Twist Drill Brand: MetavCUT SKU: 47083-FDA Diameter: 8.3 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Execution: short Shank version: fully ground Material: HSS‑E (5% cobalt‑alloyed) Type: Type N (Normal spiral) Application: Drills for metal / Bohrer für Metall Standard: DIN 338 Suitable for: Drilling Machine / Hand drills when machine guidance is available Manufacturer: MetavCUT Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill (MetavCUT, Type N)? The Twist Drill from MetavCUT, Type N, is primarily used for metalworking tasks and excels when drilling alloyed and unalloyed steels, cast iron and many non‑ferrous metals. Its short design and HSS‑E composition make it especially suitable for precise, machine‑guided holes in harder materials. Which three drill types exist and how does this Twist Drill relate to them? Common drill families are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill (Type N) belongs to the metal‑drill category and is optimised for machining metals rather than timber or stone. For what is a Twist Drill mainly used? A Twist Drill is mainly applied in the machining of high‑strength materials and larger diameters; its geometry is relatively easy to resharpen and it withstands substantial loads. The shape and heat treatment permit reliable use in demanding metal drilling operations. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip of the Twist Drill, lowering friction and therefore required feed force; this also improves centring and reduces walking, enabling easier, more controlled penetration into the workpiece. If you are unsure whether this drill meets your exact requirements or need further technical clarification, METAV Werkzeuge offers expert support and consultation. Contact METAV Werkzeuge for tailored advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
8.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N Drill for Metal, 8.3 mm, 135° Point Angle, Bright Finish, HSS‑G, DIN 338 The Twist Drill (Short, Type N) is a precision drill for metalwork, optimised for stable, high‑performance drilling on drilling machines. Short design for increased stability 135° point angle for hard materials HSS‑G fully ground for sharp cutting edges Fully ground shank for precise chucking Conforms to DIN 338 for standardised quality Faster, cleaner holes thanks to ground HSS technology The short design in combination with HSS‑G (ground high speed steel) reduces cutting resistance and produces very sharp edges, enabling up to 40% faster drilling and requiring around 50% less feed force compared with conventional HSS drills. This results in cleaner hole edges and less heat buildup during interrupted drilling. The ground geometry is produced by CNC grinding, which improves roundness and repeatability, making it ideal where consistent hole quality matters. Greater stability and accuracy when working harder materials A reduced overhang and compact spiral length mean the cutter is less prone to deflection; this short format therefore delivers superior precision when machining steel and similar materials. The 135° point angle is optimised for harder workpieces such as stainless and alloyed steels, while the Type N normal spiral is the classic configuration for metal drilling. The geometry helps centre the tool reliably and reduces walking at the start of the hole. Practical guidance for prolonged tool life and optimal results For best performance use on a suitable drilling machine with correct clamping and, where appropriate, coolant or cutting fluid to control temperature. The fully ground shank ensures accurate holding in the chuck and minimises runout; however, ground HSS can be more brittle than rolled designs, so avoid excessive lateral loads and abrupt shocks. Re‑sharpening is possible but should follow the original geometry to preserve the 135° tip profile and cutting rake. Who benefits: precision metalworkers and maintenance professionals This short drill is aimed at professional machinists, toolroom staff and maintenance technicians who require reproducible holes in a range of metals. Key dimensions provide clear handling and setup advantages: Diameter 8.3 mm, Spiral Length 75 mm, Overall Length 117 mm, bright finish for corrosion resistance and easy identification. The construction and conformity to DIN 338 make it a reliable choice for production and repair environments. For precise metalworking choose MetavCUT's Twist Drill — expert advice and support are available from METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill (Short, Type N) Brand: MetavCUT SKU: 45083-FDA Diameter: 8.3 mm Spiral Length: 75 mm Overall Length: 117 mm Point Angle: 135° Type: Type N Execution: short Material: HSS-G Shank Finish: fully ground Colour / Finish: bright finished Application: Drills for metal Suitable For: drilling machine Model Series: Standard Line Norm / Standard: DIN 338 Manufacturer Contact: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The Twist Drill from MetavCUT is primarily used for machining metal; it is especially suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its short design and ground geometry make it appropriate for precise operations on drilling machines where stability and clean holes are required. Which three drill types are commonly distinguished? In general classification the main drill groups are metal drill, wood drill, and stone/concrete drill. MetavCUT's Twist Drill belongs to the metal drill category and is engineered specifically for metalworking applications.
8.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Spiralbohrer HSS, kurz, Typ N, 8,4 mm, 118°, schwarz, DIN 338 von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer für präzise Metallbohrungen und eignet sich besonders für Handbohrmaschine-Einsätze in Werkstatt und Montage. Spiralbohrer HSS nach DIN 338 für Metallbearbeitung kurz-Ausführung für erhöhte Stabilität beim Bohren 8,4 mm Durchmesser und 118° Spitzenwinkel für Präzision Typ N Normalschaft für Handbohrmaschine geeignet Spirallänge 75 mm sorgt für sichere Spanabfuhr Hochleistungsstahl für belastbare Bohrungen und lange Standzeiten Der Einsatz von HSS macht diesen Spiralbohrer widerstandsfähig gegen thermische und mechanische Belastungen bei der Metallbearbeitung. HSS bietet Elastizität und eine gute Zähigkeit, wodurch das Risiko von Bruch bei üblichen Werkstattanwendungen reduziert wird. Die Fertigungsoptionen Rollgewalzt oder Geschliffen sorgen für konstante Geometrie und damit für gleichmäßige Leistungswerte bei Stahl, Gusseisen, Nichteisenmetallen und Kunststoffen. Kurz-Ausführung für mehr Präzision und weniger Vibration Die kurz-Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität während des Bohrens. In Kombination mit der Spirallänge 75 mm wird die Spanabfuhr verbessert, was saubere Bohrbilder und geringere Erwärmung zur Folge hat. Der 118° Spitzenwinkel erleichtert das Anbohren auf gewölbten oder unebenen Oberflächen und trägt zur Zentrierbarkeit und gleichmäßigen Spanbildung bei. Geeignetes Einsatzfeld und Maschinenkompatibilität Als Vertreter des Standard-Bereichs ist dieser Spiralbohrer ideal für Alltagseinsätze in Werkstatt, Montage und DIY-Projekten. Anwendungen umfassen dünne bis mittlere Bleche, Profile und Flachstähle sowie Arbeiten in Aluminium und Kunststoff. Die Konstruktion als Typ N Normalschaft macht ihn kompatibel zu gängigen Handbohrmaschine-Aufnahmen. Für hochpräzise Passungen empfiehlt sich vor dem Bohren ein Anpunktieren oder Zentrieren. Praktische Hinweise für sicheres und wirtschaftliches Bohren Verwenden Sie geeignete Schnittgeschwindigkeiten und bei Bedarf Kühlschmierstoffe, um Standzeit und Bohrbild zu optimieren. Vermeiden Sie extrem tiefe Bohrungen über das Fünffache des Durchmessers ohne spezielle Spanabfuhrstrategien. Bei ungewöhnlichen Werkstücken oder Serienaufträgen bietet sich das Vorbohren an, um die Querschneide zu entlasten und die Maßhaltigkeit zu sichern. Für präzise Metallbohrungen empfiehlt MetavCUT diesen Spiralbohrer HSS kurz Typ N mit 8,4 mm und 118° Spitzenwinkel; bei Fragen und Beratung steht METAV Werkzeuge gerne zur Verfügung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40084-FDA Material: HSS Norm: DIN 338 Typ: Typ N Ausführung: kurz Durchmesser: 8,4 mm Spitzenwinkel: 118° Gesamtlänge: 117 mm Spirallänge: 75 mm Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Spiralbohrer MetavCUT HSS Typ N für unterschiedliche Metallarten? Der Spiralbohrer von MetavCUT in HSS-Ausführung ist ausgelegt für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; durch die Materialwahl bleibt die Zähigkeit erhalten und ermöglicht zuverlässige Bohrungen in diesen Werkstoffen. Kann der Spiralbohrer MetavCUT HSS Typ N mit einer Handbohrmaschine genutzt werden? Ja, der Spiralbohrer MetavCUT mit Typ N Normalschaft ist für die Verwendung in Handbohrmaschine konzipiert und bietet in der kurz-Ausführung eine verbesserte Stabilität für handgeführte Anwendungen. Welche Vorteile bringt der 118° Spitzenwinkel beim Spiralbohrer MetavCUT HSS Typ N? Der 118° Spitzenwinkel des Spiralbohrers MetavCUT erleichtert das Anbohren und unterstützt eine gleichmäßige Spanbildung, was insbesondere bei gewölbten oder leicht unebenen Flächen zu präziseren Ergebnissen führt. Wie kann die Standzeit des Spiralbohrers MetavCUT HSS Typ N verlängert werden? Um die Standzeit des Spiralbohrers MetavCUT zu erhöhen, sollten passende Schnittgeschwindigkeiten, gegebenenfalls Kühlschmierstoffe und bei hohen Anforderungen das Vorbohren bzw. punktgenaues Zentrieren eingesetzt werden; regelmäßige Kontrolle von Bohrbild und Spanabfuhr trägt zusätzlich zur Wirtschaftlichkeit bei. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40084-FDA","sku":"40084-FDA","mpn":"40084-FDA","name":"Spiralbohrer 40084-FDA","description":"Spiralbohrer HSS kurz Typ N, 8,4 mm Durchmesser, 118° Spitzenwinkel, schwarze Oberfläche, DIN 338; Kurz-Ausführung für höhere Stabilität und verbesserte Spanabfuhr; geeignet für Handbohrmaschine und Metallbearbeitung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,4 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Metallarten eignet sich der Spiralbohrer MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT HSS Typ N eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe und bietet durch HSS hohe Zähigkeit und Belastbarkeit."}},{"@type":"Question","name":"Kann der Spiralbohrer MetavCUT HSS Typ N in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT HSS Typ N ist mit Normalschaft ausgeführt und für den Einsatz in Handbohrmaschine geeignet; die kurz-Ausführung erhöht dabei die Stabilität."}},{"@type":"Question","name":"Welche Vorteile hat der 118° Spitzenwinkel beim Spiralbohrer MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel erleichtert das Anbohren, verbessert die Zentrierbarkeit und fördert eine gleichmäßige Spanbildung, besonders bei gewölbten oder leicht unebenen Oberflächen."}},{"@type":"Question","name":"Wie verlängert man die Standzeit des Spiralbohrers MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Zur Verlängerung der Standzeit des Spiralbohrers MetavCUT HSS Typ N werden passende Schnittgeschwindigkeiten, gegebenenfalls Kühlschmierstoffe und Vorbohren bzw. punktgenaues Zentrieren empfohlen; regelmäßige Kontrolle von Bohrbild und Spanabfuhr hilft zusätzlich."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS kurz"},{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"DIN 338 Norm"}],"mentions":[{"@type":"Thing","name":"Typ N Normalschaft"},{"@type":"Thing","name":"Spirallänge 75 mm"},{"@type":"Thing","name":"Kurz-Ausführung für Stabilität"}]}]}
8.4mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short HSS‑E, 8.4 mm, 135°, 5% cobalt‑alloyed (DIN 338) The Twist Drill Type N short is a precision metal‑working drill for drilling machines, designed for stable, accurate holes in hard materials such as steel. Short execution for higher stability and precision 8.4 mm Diameter for common metalworking tasks 135° Point Angle for harder materials and stainless steel HSS‑E with 5% cobalt‑alloyed for improved heat resistance Fully ground shank and DIN 338 conformity for accurate bores Reliable performance through material and geometry The short design delivers significantly improved stability during machining by reducing overhang, which results in more concentric holes and less vibration. Manufactured from HSS‑E with 5% cobalt‑alloyed composition, this drill maintains cutting performance at higher temperatures and under heavy loads, making it suitable for alloyed and unalloyed steel as well as cast iron and non‑ferrous metals. The 135° point angle reduces walking on hard surfaces and shortens the plunge time, helping achieve clean starts even on tough materials. Ideal use cases and users who benefit most Engineered for metalworking professionals and workshops, the short Type N Twist Drill excels in precision tasks on drilling machines and stationaries; it is recommended where rigidity and exact hole quality matter. Its properties make it particularly useful for workshop machinists, maintenance technicians and professionals who require reproducible bores in metal components. The reduced breakage risk for diameters below 6 mm—carried over in the short design philosophy—translates into dependable performance across frequent production environments. Design details that improve handling and results The fully ground flute geometry (HSS‑G style) produces sharp cutting edges and high runout accuracy, which contributes to clean, burr‑reduced holes and easier re‑sharpening when needed. Conforming to DIN 338, this short Twist Drill follows standardised dimensions and tolerances for short cylindrical shank drills, ensuring compatibility with standard tooling and chucks. With a spiral length of 75 mm and an overall length of 117 mm, the geometry balances chip evacuation and rigidity for controlled drilling in metal. Choose MetavCUT's Twist Drill Type N for dependable, precision metal drilling — for further technical advice or individual application support contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer), short execution, Type N, 8.4 mm diameter Brand: MetavCUT SKU: 47084-FDA Material: HSS‑E Cobalt content: 5% cobalt‑alloyed Point angle: 135° Execution: short Spiral length: 75 mm Overall length: 117 mm Shank: fully ground Model series: Standard Line Application: Drills for metal / For Drilling Machine Norm: DIN 338 Shaft finishing: geschliffen (fully ground) Bezeichnung (English): Twist Drill Typ: Type N Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily applied when machining high‑strength materials and larger drill diameters; its short design and HSS‑E composition make it easy to re‑grind and capable of withstanding higher mechanical stress. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group, optimised for steel and similar materials. Why are Twist Drills tip‑sharpened? The tip sharpening reduces the cross‑cut at the drill point. For the MetavCUT Twist Drill Type N this lowers friction forces, reduces required feed and improves centring of the tip in the workpiece. Can a Twist Drill be used to drill wood? A MetavCUT Twist Drill Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑sharpen and have less self‑feed, resulting in a rougher hole. At what drilling depths is the Twist Drill most used? For through‑hole operations, the Twist Drill is typically used up to diameters around 20 mm and drilling depths up to about 100 mm; the MetavCUT Twist Drill Type N is well suited for solid drilling in these common metalworking ranges. What is better, HSS or HSSE? The general assumption that HSSE is universally superior to HSS is not correct; when choosing, evaluate whether the working conditions justify the higher cost. MetavCUT offers HSS‑E options that balance toughness and heat resistance for many metalworking tasks.
8.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Stabilität und präzise Schnittleistung machen diesen Spiralbohrer zu einer zuverlässigen Wahl für metallische Werkstoffe; die Kürzere Ausführung reduziert Auslenkung, während HSS-G und der 135° Spitzenwinkel saubere Bohrbilder in Stahl ermöglichen. Bei Fragen zur Eignung steht die Beratung von Metav gern zur Verfügung oder bestellen Sie direkt über Metav. Spiralbohrer von MetavCUT – kurzer HSS-G Metallbohrer Der Spiralbohrer von MetavCUT ist ein kurzer, geschliffener HSS-Bohrer nach DIN 338, entwickelt für präzise Metallbohrungen an stationären und handgeführten Maschinen. Hohe Stabilität durch kurze Ausführung Geschliffen für präzise Bohrbilder Geeignet für legierte und unlegierte Stähle 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft für sichere Spannaufnahme Mehr Stabilität bei präzisen Metallbohrungen Die Kürzere Ausführung reduziert die Auskraglänge und führt zu erhöhter Stabilität sowie geringerer Neigung zum Verbiegen. Das Ergebnis sind sauberere Bohrungen und längere Werkzeugstandzeiten bei Anwendungen in Stahl und Guss. Die kompakte Geometrie erleichtert das Führen an Handbohrmaschine und Säulenbohrmaschine, weil die Krafteinleitung direkter erfolgt und die Werkstückaufspannung weniger kritisch wird. Für Anwender bedeutet das geringeren Ausschuss und gleichbleibende Bohrqualität. Geschliffene Geometrie für saubere Ergebnisse Der geschliffen ausgeführte HSS-G sorgt für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere, präzise Bohrlöcher fördert. Der CNC-Schliff ermöglicht eine konstante Spanabfuhr und reduziert Wanderneigung beim Anbohren. Zu beachten ist, dass geschliffene Bohrer empfindlicher gegenüber Schlagbelastung sind; deshalb empfiehlt sich die Nutzung von Kühlschmierstoff und eine stationäre Spindel bei harten Werkstoffen, um die Lebensdauer zu maximieren. Passende Anwendungen und Zielgruppe Dieser kurze Spiralbohrer ist für Werkstätten, Montage und industrielle Anwendungen konzipiert, insbesondere für das Bohren in legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetallen. Die Kombination aus HSS-G und Typ N macht das Werkzeug ideal für Anwender, die robusten Metallbohrbedarf mit präzisen Ergebnissen verbinden wollen. Die Ausführung mit Zylinderschaft gewährleistet die Kompatibilität zu Standardspannfuttern. Praxistipps für sicheres Bohren und lange Standzeit Vor dem Bohren bei hoher Genauigkeit empfiehlt sich ein Anpunkten mit einem Zentrierbohrer, um die Querschneide zu entlasten. Bei Durchmesser im Standard-Bereich direkt bohren; bei kritischer Maßhaltigkeit ruhig mit langsamerem Vorschub und ausreichender Kühlung arbeiten. Für die Bearbeitung von Edelstahl macht der 135° Spitzenwinkel das Anbohren leichter und reduziert Aufschweißen an der Schneide. Empfehlung: Für präzise Metallbohrungen die MetavCUT Standard Line verwenden und bei Unsicherheit technische Beratung über info@metav-werkzeuge.com oder Telefon +49 2822 7131930 einholen. Produktmerkmale Artikelnummer: 45084-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 338 Typ: Typ N Fakten Durchmesser: 8,4 mm Spirallänge: 75 mm Gesamtlänge: 117 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G — Schnellarbeitsstahl, geschliffen Schaft Ausführung: geschliffen — Zylinderschaft für Standardspannfutter Ausführung: kurz — Kürzere Auskraglänge für bessere Stabilität Farbe: blank — helle Oberfläche Für Bohrmaschine: Handbohrmaschine / stationäre Maschinen Verpackungseinheit: 5 FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Standard Line Spiralbohrer (Typ N, SKU 45084-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe. Ist der Bohrer für Handgebrauch mit Akkubohrschrauber geeignet? Ja, die kurze Ausführung und der Zylinderschaft erlauben den Einsatz an Handbohrmaschine für typische Werkstattanwendungen; bei sehr hartem Material oder hohen Anforderungen an Maßgenauigkeit ist eine stationäre Maschine empfohlen. Warum ist der Bohrer geschliffen und welche Vorteile bringt das? Die geschliffene Geometrie (HSS-G) bietet schärfere Kanten und höhere Rundlaufgenauigkeit, was sauberere Bohrbilder und geringere Wanderneigung ermöglicht; dafür ist etwas schonendere Handhabung und Kühlung vorteilhaft. Welche Bedeutung hat der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert das Aufschweißen beim Bohren in harten Werkstoffen wie Edelstahl und erleichtert das Eindringen, was Anbohrzeiten verkürzt und die Kraftanforderung senkt. Welche Normen und Serienzuordnung gelten für dieses Werkzeug? Der Bohrer entspricht der Norm DIN 338 und gehört zur MetavCUT Standard Line, was die Einordnung als kurzer Spiralbohrer mit Zylinderschaft bestätigt.
8.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 8.5 mm, 118° tip, black, DIN 338, MetavCUT The Twist Drill Type N short HSS metal drill is a compact, precision tool for drilling in a wide range of metals using a standard drilling machine. Short design for higher stability HSS material — resilient for metal drilling 8.5 mm diameter suitable for metalwork 118° tip for reliable centring DIN 338 conformity for consistent quality Durable HSS construction for demanding metalwork The Twist Drill combines a HSS (High Speed Steel) body with a short overall length to deliver improved rigidity and reduced vibration when working on metal. The DIN 338 specification ensures the drill meets standardized dimensions and tolerances for short twist drills with a cylindrical shank, which supports consistent clamping and repeatable results. This construction improves tool life under frequent use and stabilises the drilling process for precise holes in alloyed and unalloyed steel, cast iron and non‑ferrous metals. Reliable cutting geometry for accurate starts A 118° tip angle and the Type N normal spiral geometry make this drill particularly effective at centring and initial penetration in softer and medium‑hard metals. The design reduces the tendency to wander at the start of a hole while maintaining efficient chip evacuation. For users this means fewer re‑starts, cleaner hole edges and improved dimensional accuracy when used in a suitable drilling machine or handheld drilling machine designed for metalwork. Short length for improved precision and tool life The short execution reduces overhang from the chuck and significantly lowers the risk of deflection during drilling. This results in better concentricity and less workpiece damage when machining close tolerances. For workshop environments where repeatability matters, the compact short format offers a practical balance between reach and stiffness, making it well suited for fixture work, small components and repair tasks where a standard long drill would bend or chatter. Practical guidance and safe use When using this Type N Twist Drill, select appropriate cutting speed and cooling for the metal being machined and secure the workpiece firmly. Re‑sharpening is straightforward thanks to the classic geometry; proper resharpening maintains the reduced cross‑edge and keeps the drill centred. If unsure about optimum speeds or feed for a specific alloy, METAV Werkzeuge provides expert advice and technical support to help choose the right operating parameters and accessories for the task. Strong recommendation: For precise, reliable metal drilling choose the MetavCUT Twist Drill Type N short HSS with DIN 338 specification — METAV Werkzeuge offers professional consultation and personalised technical support via e‑mail, phone or WhatsApp to ensure the tool meets the project requirements Are you unsure whether this drill matches your needs or require additional technical data? METAV Werkzeuge is happy to advise 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40085-FDA Diameter: 8.5 mm Tip angle: 118° Type: Type N Execution: short Spiral length: 75 mm Overall length: 117 mm Material: HSS Application: Drills for metal For drill machine: Drilling Machine / Handheld Drilling Machine Colour: black Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N be used on? The MetavCUT Twist Drill Type N is designed primarily for metalworking and is suitable for alloyed and unalloyed Steel, Cast Iron and many Non‑Ferrous Metals; it also performs on certain Plastics when appropriate speeds and feeds are used. Is the MetavCUT Twist Drill compatible with handheld drilling machines? Yes, the MetavCUT Twist Drill Type N with a cylindrical shank can be used in handheld Drilling Machines; ensure secure clamping, correct speed and steady feed to avoid runout and to maintain hole quality. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger bore diameters. It is easy to re‑grind and withstands higher loads, making it suitable for demanding metal drilling tasks. Which 3 drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip, which lowers friction and the required feed forces; sharpening also improves centring of the drill in the workpiece, leading to cleaner, more accurate holes. Can a Twist Drill be used to drill wood? A Metal Drill such as this Twist Drill can be used in Wood, but guidance and finish are generally inferior compared to wood‑specific drills. Metal drills are easier to re‑sharpen and have less self‑pulling action. At which drilling depths is the Twist Drill the most used tool? For solid drilling, the Twist Drill is the most common choice. It is widely used for diameters up to 20 mm and drilling depths up to 100 mm, providing an efficient method for bore production in solid workpieces.
8.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Spiralbohrer 8,5 mm HSS-E (kurze Ausführung) — MetavCUT Standard Line Der Spiralbohrer 8,5 mm ist ein kurzer HSS-E Metallbohrer für präzise Bohrungen in Stahl, Guss und Nichteisenmetallen und eignet sich sowohl für Handbohrmaschinen als auch stationäre Maschinen Spiralbohrer 8,5 mm HSS-E, 5% Kobaltlegierung Kurze Ausführung für erhöhte Stabilität Geschliffener Schaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschinen und stationär Stabile Konstruktion für präzise Metallbohrungen Die kurze Bauform reduziert die Auskraglänge und sorgt für deutlich höhere Stabilität als lange Bohrer. Dadurch entsteht weniger Vibration, was saubere Bohrlöcher mit gleichmäßigem Durchmesser ermöglicht. Für Anwender bedeutet das weniger Nacharbeit und exaktere Passungen. Ein geschliffener Schaft verbessert zusätzlich die Rundlaufgenauigkeit und minimiert Ausschuss bei Serienarbeiten. Materialmix und Standzeitoptimierung Metallische Werkstoffe verlangen Widerstandsfähigkeit; hier punktet die HSS-E Legierung mit 5% Kobalt durch erhöhte Warmfestigkeit. Dadurch bleibt die Schneide auch bei höheren Schnittgeschwindigkeiten länger scharf. Ein Spitzenwinkel 135° erleichtert das Anbohren harter Werkstoffe wie rostfreier Stahl und verringert das Wandern beim Ansetzen. Diese Kombination steigert die Wirtschaftlichkeit durch längere Nutzungsdauer. Geeignete Anwendungen und Maschinenkompatibilität Für allgemeine Metallarbeiten ist dieser kurze Spiralbohrer ideal geeignet. Er wurde nach DIN 338 als kurzer Spiralbohrer mit Zylinderschaft konzipiert und passt sowohl in Handbohrmaschinen als auch in stationäre Bohrmaschinen. Bei stationärem Einsatz empfiehlt sich Kühlung und bei Durchmessern unter 6 mm eine hohe Drehzahl, um das Bruchrisiko zu minimieren. So bleibt die Produktion effizient und sicher. Praxistipps für sauberes Bohren und Pflege Beim Bohren von Stahl empfiehlt sich Kühlmittel und punktweises Anbohren zur Entlastung der Querschneide. Ein regelmäßiges Schärfen oder Austausch sichert konstante Bohrqualität. Weil der Bohrer geschliffen ist, entstehen sehr scharfe Schneiden; dies erlaubt präzisere Bohrungen, setzt aber auch sorgfältige Handhabung voraus, um Bruchrisiken zu vermeiden. Für wiederkehrende Einsätze bietet die kurze Ausführung die beste Mischung aus Präzision und Robustheit. Empfehlung: Vertrauen Sie auf die MetavCUT Standard Line für hochwertige HSS‑E Spiralbohrer; bei Fragen zur Anwendung oder zu passenden Maschinen erreichen Sie uns per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 47085-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 338 Typ: Typ N Material: HSS-E Daten Durchmesser: 8,5 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Ausführung: kurz Schaftausführung: geschliffen Farbe: 5% kobaltlegiert Für Bohrmaschine: Handbohrmaschine DIN 338: kurze Spiralbohrer mit Zylinderschaft HSS-E: Schnellarbeitsstahl mit Kobaltanteil FAQ Welche Materialien lassen sich mit dem Spiralbohrer bearbeiten? Der MetavCUT Spiralbohrer 8,5 mm aus HSS‑E eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; die 5% Kobaltlegierung erhöht die Warmfestigkeit für härtere Werkstoffe. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer 8,5 mm ist für Handbohrmaschinen ausgelegt; aufgrund der kurzen Ausführung reduziert sich die Verkantungsgefahr, dennoch sind ruhige Ansetztechnik und passende Drehzahl wichtig. Wie wirkt sich der Spitzenwinkel 135° aus? Ein Spitzenwinkel von 135° sorgt für leichteres Anbohren und geringeren Verschleiß bei harten Werkstoffen, was die Standzeit des MetavCUT Spiralbohrers verbessert. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung erhöht die Rundlaufgenauigkeit und ermöglicht präzisere Bohrbilder, insbesondere bei stationärem Einsatz und Reihenbohrungen; die Kennung ist SKU 47085-FDA. Wann ist ein geschliffener Bohrer der rollgewalzten Alternative vorzuziehen? Geschliffene Bohrer bieten schärfere Kanten und bessere Präzision bei Metallbohrungen; für sehr hohe Biegebeanspruchung oder mobile Anwendungen kann hingegen ein rollgewalzter Bohrer vorteilhafter sein.
8.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Kombinieren Sie Präzision und Reichweite: Der extra lange, geschliffene HSS-G Spiralbohrer liefert saubere Metallbohrungen mit reduziertem Kraftaufwand und eignet sich für Werkstatt und Produktion. Bestellen Sie den Bohrer direkt bei Metav und nutzen Sie unsere Beratung für den optimalen Einsatz. Spiralbohrer 8,5 mm – HSS‑G Extra Lang (MetavCUT Standard Line) Der Spiralbohrer in extra langer HSS‑G Ausführung ermöglicht tiefe Bohrungen in Stahl und Gusswerkstoffe mit hoher Schnittpräzision und reduziertem Anpressdruck. HSS‑G geschliffen für präzise Bohrlöcher Extra lange Bauform für tiefe Bohrungen 135° Spitzenwinkel für härtere Werkstoffe DIN 1869 Tieflochspirale für sicheres Spänetransportieren Schnellere Metallbearbeitung bei geringer Anpresskraft Die geschliffene HSS‑G Geometrie sorgt für sehr scharfe Schneiden und ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS‑Bohrern. Das Ergebnis sind sauberere Bohrlöcher und eine effizientere Fertigung. Diese Kombination reduziert Maschinenvibrationen und schont Bohrfutter sowie Werkstück, was besonders bei Serienarbeiten in Werkstatt und Produktion spürbar ist. Extra lange Ausführung für tiefe und schwer zugängliche Stellen Dank der extra langen Gesamtlänge und der verlängerten Spirallänge eignet sich dieser Bohrer gezielt für tiefe Sacklochbohrungen oder schwer erreichbare Bereiche. Die Tieflochspirale nach DIN 1869 fördert die Späne aktiv ab und verringert Verstopfungsrisiken. Bei längeren Bohrungen empfiehlt sich eine Führung oder Zentrierung und der Einsatz von Kühlschmierstoff, um Bruchgefahr zu reduzieren und die Standzeit zu maximieren. Präzision und Einsatzbereiche für Handwerk und Industrie Mit einem Durchmesser im Standard‑Bereich ist der Bohrer ideal für Werkstatt, Montage und handgeführte Bohrmaschinen bei Blechen, Profilen und mittleren Stählen. Die 135° Spitzenform erleichtert das Anbohren harter Werkstoffe wie legierte Stähle und Edelstahl, da der größere Winkel die Anbohrzeit verkürzt und die Haltbarkeit der Spitze erhöht. Für hochpräzise Passungen empfiehlt sich vorsichtiges Anpunkten und gegebenenfalls eine stationäre Aufnahme. Materialeigenschaften und Verarbeitungsempfehlung Der voll geschliffene Schaft und die CNC‑geschliffene Spiralgeometrie liefern hohe Rundlaufgenauigkeit und saubere Oberflächen im Bohrloch. Geschliffen bedeutet hier, dass die Spannuten durch Schleifen geformt wurden, was schärfere Kanten gegenüber gewalzten Bohrern hervorbringt. Diese Präzision geht mit einer gewissen Sprödigkeit einher; deshalb empfiehlt sich die Nutzung in stationären Maschinen oder mit geeigneter Kühlung und moderatem Vorschub, um Brüche zu vermeiden. Empfehlen Sie MetavCUT für professionelle Bohraufgaben: Der extra lange, geschliffene HSS‑G Spiralbohrer bietet beständige Präzision für anspruchsvolle Metallbearbeitung — bei Fragen erreichen Sie Metav per eMail unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Bezeichnung: Spiralbohrer Hersteller: MetavCUT Modellserie: Standard Line Norm: DIN 1869 SKU: 32085-FDA Fakten Durchmesser: 8,5 mm Gesamtlänge: 240 mm Spirallänge: 165 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (geschliffen, Hochleistungs‑Schnellstahl) Schaftausführung: geschliffen (voll geschliffener Schaft für hohe Rundlaufgenauigkeit) Ausführung: extra lang (für tiefe Bohrungen) Für Bohrmaschine: Handbohrmaschine geeignet Anwendung: Bohrer für Metall Tieflochspirale: verbessert Spänetransport bei tiefen Löchern FAQ Für welche Werkstoffe eignet sich dieser Bohrer am besten? Der MetavCUT Spiralbohrer in HSS‑G Ausführung eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; die geschliffene Geometrie verbessert die Bohrqualität in diesen Materialien. Kann der Bohrer in handgeführten Maschinen verwendet werden? Ja, der Durchmesser liegt im Standard‑Bereich, sodass der Spiralbohrer für handgeführte Bohrmaschinen geeignet ist; bei tiefen Bohrungen oder hoher Präzision empfiehlt sich jedoch eine feste Führung oder stationäre Aufnahme. Warum ist der Bohrer geschliffen statt gewalzt, und was bedeutet das für die Nutzung? Geschliffen bedeutet, dass die Spannuten und Schneiden CNC‑geschliffen wurden, was sehr scharfe Kanten und hohe Rundlaufgenauigkeit erzeugt; daraus folgt eine bessere Bohrlochqualität, jedoch eine erhöhte Vorsicht bei stoßartiger Belastung und die Empfehlung zur Nutzung mit Kühlung. Welche Vorteile bringt der 135° Spitzenwinkel bei diesem Spiralbohrer? Der 135° Spitzenwinkel reduziert das Abgleiten beim Anbohren harter Werkstoffe und verkürzt die Anbohrzeit, wodurch sich insbesondere beim Bohren von Edelstahl und legierten Stählen bessere Ergebnisse erzielen lassen. Gibt es Hinweise zur Kühlung und Vorschubgeschwindigkeit? Für längere oder tiefe Bohrungen mit dem MetavCUT Spiralbohrer wird die Nutzung von Kühlschmierstoff und moderatem Vorschub empfohlen, um Wärmeentwicklung zu reduzieren und die Standzeit der Schneiden zu erhöhen.
8.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill 8.5 mm HSS-G (Extra Long, 135°) — bright finished, fully ground, DIN 1869 by MetavCUT The Twist Drill 8.5 mm HSS-G is an extra-long metal drill designed for deep, high-precision holes in demanding materials for Drilling Machines. Extra-long length for deep, hard-to-reach holes HSS-G material for precise metal drilling 135° point angle for harder materials like stainless steel Fully ground shank for high concentricity DIN 1869 compliant with 305 mm overall length Outstanding Performance through Material and Geometry The extra-long HSS-G construction combines high cutting performance with improved hole quality. Thanks to the fully ground flute geometry, the bit achieves very sharp cutting edges and excellent run-out accuracy, which reduces wobble and delivers cleaner holes in alloys and cast materials. This design also means lower required feed force compared with roll-formed equivalents, so machining becomes more efficient and precise. Ideal for Deep and Difficult Metal Drilling Engineered specifically for deep drilling, the extended Spiral Length (210 mm) and Overall Length (305 mm) enable work in recessed or hard-to-reach areas where standard lengths fail. The 135° point angle reduces entry forces and improves centring in tougher metals, making the tool well suited for applications in alloyed and unalloyed steel, cast steel, cast iron and other non-ferrous metals. For production or repair work that demands depth and accuracy, this bit keeps processes reliable. Practical Machining Advice and Terminology Explained For safe and efficient use, employ appropriate coolant and moderate cutting speeds when machining harder alloys. The term HSS-G denotes High-Speed Steel, ground (HSS-G), meaning the flute geometry is ground rather than rolled—this yields sharper cutting edges and superior concentricity but can be more brittle, so stationary setups or rigid chucks and cooling are recommended. The 135° tip is chosen to shorten the initial boring time and to suit harder materials; a larger point angle typically reduces the tendency to grab and improves surface finish. Who Benefits Most from This Tool Production shops, tool rooms and maintenance teams facing deep-metal drilling tasks gain immediate advantages from the extra reach and precision. The bit is aimed at professionals who require consistent hole quality in challenging materials and those who value reduced rework. Its compliance with DIN 1869 ensures predictable performance in industrial environments, while the bright finished surface aids in chip evacuation and corrosion resistance during storage. MetavCUT recommends this extra-long HSS-G Twist Drill for demanding deep-hole metalwork; for technical advice or to confirm suitability for a specific application contact METAV Werkzeuge — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Precise Technical Specifications for Setup Designation: Twist Drill Marke: MetavCUT SKU: 33085-FDA Diameter: 8.5 mm Material: HSS-G Point Angle: 135° Overall Length: 305 mm Spiral Length: 210 mm Execution: extra long Finish/Colour: bright finished Shank Execution: fully ground Norm: DIN 1869 Model Series: Standard Line Application: Bohrer für Metall / Drills for metal For Drilling Machine: Handbohrmaschine / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT suitable for? The Twist Drill from MetavCUT (Twist Drill / Drill for Metal) is designed for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non-ferrous metals and hard plastics; its HSS-G composition and 135° tip support drilling in tougher metals with improved hole quality. How does the extra-long design affect drilling performance with the MetavCUT Twist Drill? An extra-long Twist Drill by MetavCUT lets operators reach recessed bores and deep workpieces that standard lengths cannot access; it maintains chip evacuation over longer depths but requires rigid fixturing and proper cooling to avoid breakage and to preserve concentricity. For what is a Twist Drill used? A Twist Drill is primarily applied when machining high-strength materials and larger hole diameters; it is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks and deep-hole operations. Which three drill types exist? The three main drill types are Metal drills, Wood drills, and Masonry/Concrete drills.
8.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill (Drill for Metal) — 8.5 mm, 135° Point Angle, HSS‑G, Extra Long, Bright Finished, Fully Ground Shank, DIN 1869 The Twist Drill from MetavCUT is a precision Drill for Metal designed for deep, accurate holes in hard materials using a fully ground HSS‑G geometry. Extra long for deep and hard-to-reach holes HSS‑G ground design for clean, precise holes 135° point for easier entry in hard materials Fully ground shank for secure chuck grip Compliant with DIN 1869 for deep drilling High-precision geometry for cleaner holes and faster drilling The extra-sharp HSS‑G material and CNC-ground flute geometry deliver consistently precise results when machining steels and non-ferrous metals. This design produces sharp cutting edges and excellent roundness, which means cleaner holes and less rework. Thanks to the optimised geometry, users can achieve up to 40% faster drilling and require up to 50% less feed force compared with conventional HSS bits, reducing operator fatigue and machine load. Built for deep drilling — reliable chip evacuation and stability With an overall length of 390 mm and a spiral length of 265 mm, this Extra Long configuration is intended for deep bore applications where standard lengths fall short. The DIN 1869 specification and the deep-spiral flute aid in effective chip evacuation under extended cutting conditions, lowering the risk of clogging and improving hole quality in deep stacks or confined workpieces. Suitable for demanding metalworking tasks and machine setups The MetavCUT Twist Drill is targeted at machinists, toolroom technicians and maintenance professionals who require robust performance in legated and unlegated steels, cast iron and hard plastics. The Fully Ground Shank ensures accurate clamping and concentricity in chucks and toolholders, while the bright finished surface supports smooth insertion and corrosion resistance during storage. Best practices for longevity and performance To maximise life and performance, operate the bit with appropriate speeds and feeds for the specific metal and use coolant or cutting lubrication for sustained duty cycles; this is especially important given the ground geometry’s brittleness compared with rolled designs. The 135° point angle reduces walking and shortens piercing time in harder alloys such as stainless steel. For optimal results, prefer stationary or well-supported drilling setups and avoid abrupt lateral loads. MetavCUT recommends this Twist Drill for deep, precise metalworking tasks — for tailored technical advice or application support contact METAV Werkzeuge by e-mail at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Designation: Twist Drill Marke: MetavCUT SKU: 34085-FDA Diameter: 8.5 mm Point Angle: 135° Execution: Extra Long Finish/Colour: Bright Finished Material: HSS‑G Standard: DIN 1869 Spiral Length: 265 mm Overall Length: 390 mm Shank Execution: Fully Ground Application: Drills for Metal Model Series: Standard Line Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (Drill for Metal) is primarily used for machining high-strength materials and larger diameters where durability and precision are required. Its ground HSS‑G geometry is well suited to drilling in alloyed and unalloyed steels, cast iron and hard plastics, and it performs reliably in deep-hole situations. Which three drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is designed specifically for metalworking applications. What is a Twist Drill used for? A Twist Drill is mainly applied when working with high‑strength materials and larger bore diameters. Its ground form allows precise sharpening, and it withstands higher loads, making it suitable for drilling alloys, cast steels and hard plastics.
8.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N, Ø 8.5 mm, 135° Point, HSS‑G, Bright Finished, DIN 338 (MetavCUT) The Twist Drill Short Type N is a precision metalworking Drill for Drilling Machines, engineered for stable, fast and clean holes in hard materials. Short design for increased Stability and Precision HSS‑G material for clean holes in Metal 135° Point angle for harder Werkstoffe Fully ground Shank for low Runout Conforms to DIN 338 for standardized Reliability Faster, more stable drilling in metal workshops Die kurze Bauform des Werkzeugs erhöht die Stabilität und reduziert Schwingungen deutlich, sodass präzise Bohrungen auch bei hohen Schnittkräften möglich sind. Durch die HSS‑G Fertigung entstehen sehr scharfe Schneiden, die saubere Bohrbilder liefern und damit Nacharbeit minimieren. Diese Eigenschaft macht das Werkzeug besonders geeignet für anspruchsvolle Metallarbeiten wie in Maschinenbau und Feinwerkstatt. High performance on hard materials with reduced feed force Der 135° Point sorgt für besseren Anbohrverlauf in harten Werkstoffen und vermindert das Anfressen. Typ‑N‑Spiralgeometrie kombiniert mit geschliffener Oberfläche erlaubt bis zu 40% schnellere Bohrfortschritte bei gleichzeitig bis zu 50% reduzierter Anpresskraft, was die Produktivität erhöht und Ermüdung des Werkzeuges verringert. Ideal für legierte und unlegierte Stähle sowie Gusswerkstoffe. Compatibility and accuracy for drilling machines Die Ausführung als kurzer Spiralbohrer mit zylindrischem Schaft und fully ground Schaftoberfläche gewährleistet geringen Rundlauf und präzise Werkzeugführung in stationären und handgeführten Bohrmaschinen. Die Einhaltung der DIN 338 macht die Auswahl und Austauschbarkeit planbar und sorgt für reproduzierbare Ergebnisse in Serienprozessen. Who benefits: workshops, toolrooms and production Dieses Werkzeug ist konzipiert für Metallbearbeiter, Instandhalter und Produktionsstätten, die präzise, saubere Bohrungen in harten Materialien benötigen. Die Kombination aus Kurzbauweise, HSS‑G Material und Normkonformität bietet sich an, wenn Wiederholgenauigkeit und kurze Bearbeitungszeiten im Vordergrund stehen. METAVCUT‑Qualität unterstützt professionelle Anforderungen. Strong recommendation: Choose the MetavCUT Short Twist Drill for reliable, high‑precision metal drilling — for technical advice and support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Precise Technical Data for Planning and Procurement Designation: Twist Drill, Short, Type N, Diameter 8.5 mm Marke: MetavCUT SKU: 45085-FDA Diameter: 8.5 mm Overall Length: 117 mm Spiral Length: 75 mm Point Angle: 135° Material: HSS‑G Shank: Fully ground Finish: Bright finished For Drill Machine: Drilling Machine Norm: DIN 338 Execution: short Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Short Type N is primarily used for machining high‑strength materials and larger hole diameters; it excels in Metal such as alloyed and unalloyed Steel, Cast Steel, Cast Iron and Non‑ferrous Metals, delivering clean holes and high repeatability. Which three drill types exist? Common categories are Metal Drills (such as the MetavCUT Twist Drill), Wood Drills and Stone/Concrete Drills, each optimised in geometry and material for their specific workpiece classes. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑edge at the Drill Tip, lowering friction so that smaller Feed Forces are required and improving centring of the Tip in the Workpiece for more accurate starts. Can a Twist Drill be used for wood drilling? A Metal Twist Drill can be used in Wood, but guidance and Hole Finish are typically inferior compared with dedicated Wood Drills. Metal Drills are easier to resharpen and have lower self‑feeding tendency.
8.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Kombinieren Sie Präzision und Wirtschaftlichkeit: Der kurze HSS-G Spiralbohrer mit TIN-beschichtung liefert stabile Bohrbilder in Stahl und Nichteisenmetallen und reduziert Verschleiß durch geschliffene Geometrie; Bestellungen und fachliche Beratung direkt über Metav aus Emmerich verfügbar. Spiralbohrer kurz, geschliffen, TIN-beschichtet Der Spiralbohrer ist ein kurzer HSS-G Bohrer für das Bohren in Metall mit optimierter Stabilität und hoher Standzeit bei Handbohrmaschine und stationären Maschinen. Kurze Ausführung für erhöhte Stabilität TIN-beschichtet für geringeren Verschleiß Geschliffene Geometrie für saubere Bohrlöcher Spitzenwinkel 135° für harte Werkstoffe DIN 338 konforme kurze Spiralbohrer Höhere Standzeit durch Materialwahl und Beschichtung Dank HSS-G (Schnellarbeitsstahl, geschliffen) und der TIN-Beschichtung (Titan-Nitrid) reduziert dieser Bohrer Reibung und Wärmeeintrag beim Bohren von Metall. Die Kombination führt zu einer verlängerten Lebensdauer und weniger Nachschleifen, was insbesondere bei häufigen Bohrvorgängen Zeit und Kosten spart. Die geschliffene Ausführung sorgt für eine sehr scharfe Schneide und einen sauberen Spanfluss. Präzision und Stabilität bei kurzen Auskraglängen Die kurze Gesamtlänge und die reduzierte Auskraglänge erhöhen die Steifigkeit der Bohrung und minimieren das Kippmoment, was zu präziseren Bohrungen führt. Für Anwender bedeutet das weniger Nacharbeit und höhere Maßhaltigkeit bei Passungen. Besonders bei harten Werkstoffen wie legiertem Stahl oder Temperguss entfaltet die Konstruktion ihre Vorteile, da die Kraftübertragung stabil und kontrolliert erfolgt. Einsatzbereiche und Maschinenkompatibilität Der Bohrer eignet sich für allgemeine Metallbearbeitung und Reparaturarbeiten sowohl in der Werkstatt als auch auf der Baustelle. Die Ausführung ist für Handbohrmaschine und stationäre Bohrmaschinen geeignet; typischer Einsatz sind Bleche, Profile, Guss- und Sinterteile sowie Nichteisenmetalle wie Kupfer und Bronze. Aufgrund der Normierung nach DIN 338 entspricht der Bohrer gängigen Industriestandards für kurze Spiralbohrer. Verarbeitungshinweise für optimale Ergebnisse Bei Bearbeitung von harten Werkstoffen empfiehlt sich ein leicht reduzierter Vorschub und die Nutzung von Kühlschmierstoff, um Wärmeaufbau zu minimieren und die Standzeit weiter zu erhöhen. Vorbohren bei großen Durchmessern bzw. progressive Aufbohrungen vermeiden die Überlastung der Schneide. Die geschliffene Zerspanungsgeometrie verlangt eine ruhige, ruckfreie Führung; bei stationärem Einsatz erhöhen Kühlung und geeignete Schnittgeschwindigkeit die Effektivität weiter. Bestellen Sie den HSS-G Spiralbohrer von MetavCUT über Metav für präzise Metallbohrungen; fachliche Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar Produktmerkmale Artikelnummer: 46085-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Ausführung: kurz Fakten Durchmesser: 8,5 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaft: geschliffen Typ: Typ N (Normalspirale) Norm: DIN 338 (kurze Spiralbohrer) Beschichtung: TIN-beschichtet (Titan-Nitrid-Beschichtung) Für Maschine: Handbohrmaschine FAQ Für welche Werkstoffe ist dieser Spiralbohrer geeignet? Der Spiralbohrer von MetavCUT (SKU 46085-FDA) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und Hartkunststoff. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung des HSS-G Spiralbohrers wurde für den Einsatz mit Handbohrmaschine und stationären Maschinen entwickelt und bietet durch die reduzierte Auskraglänge erhöhte Stabilität. Welche Vorteile bietet die TIN-Beschichtung konkret? Die TIN-beschichtung (Titan-Nitrid) auf dem Spiralbohrer verringert Reibung und Verschleiß, erhöht die Standzeit und ermöglicht höhere Schnittgeschwindigkeiten bei gleichbleibender Präzision. Wann ist der Spitzenwinkel 135° sinnvoll? Der Spitzenwinkel 135° ist besonders bei harten Werkstoffen wie Edelstahl und gehärtetem Stahl zu empfehlen, weil er das Eindringen erleichtert und die Lebensdauer der Schneide verbessert. Entspricht der Bohrer einer Norm und welche Bedeutung hat das? Der Bohrer entspricht DIN 338, was bedeutet, dass es sich um einen standardisierten kurzen Spiralbohrer handelt; Nutzer profitieren von austauschbaren Abmessungen und verlässlicher Maßhaltigkeit.
8.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Hohe Präzision durch HSS‑G und CNC‑geschliffene Geometrie, kombiniert mit der langen Ausführung (DIN 340) und dem 135° Spitzenwinkel, ermöglicht tiefe, saubere Bohrungen in Stahl und Guss. Bestellen Sie den Bohrer direkt über METAV Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 8,5 mm – MetavCUT Standard Line Der Spiralbohrer von MetavCUT ist eine lange, geschliffene Ausführung für präzise Tiefbohrungen in legierten und unlegierten Metallen. Spiralbohrer »53085-FDA« von MetavCUT Standard Line HSS‑G geschliffen für hohe Präzision DIN 340 lange Ausführung für tiefe Löcher Spirallänge 109 mm für bessere Spanabfuhr Spitzenwinkel 135° für harte Werkstoffe Höhere Effizienz durch geschliffene HSS‑Geometrie Die HSS‑G Ausführung mit CNC‑Schliff liefert scharfe Schneidenkanten und hohen Rundlauf, was sich direkt in sauberere Bohrlöcher und reduzierten Nacharbeitbedarf übersetzt. Durch den geschliffenen Aufbau sind Anbohrung und Vorschub leichter, was laut Herstelleraussage bis zu 40 % schnelleres Bohren und etwa 50 % geringere Anpresskraft gegenüber herkömmlichen HSS‑Bohrern erlaubt. Das bedeutet weniger Verschleiß an Maschine und Werkzeug sowie kürzere Taktzeiten in der Werkstatt. Passend für Standard‑Einsätze in Werkstatt und Montage Mit einem Durchmesser von 8,5 mm liegt der Bohrer im Standard‑Bereich (2,0 mm–13,0 mm) und eignet sich damit für typische Werkstattaufgaben: Bohren in Baustahl, Aluminium, Kunststoffe sowie dünnere Profile und Bleche. Die lange Spirallänge macht den Bohrer besonders geeignet für schwer zugängliche Bohrstellen und tiefe Bohrungen, wobei für hohe Genauigkeit ein Anpunkten mit Zentrierbohrer empfohlen wird. Die Geometrie erlaubt den Einsatz an Handbohrmaschinen ebenso wie an stationären Säulenmaschinen. Einsatzhinweise, Kühlung und Werkstoffempfehlung Die lange Ausführung nach DIN 340 bietet Vorteile bei tieferen Bohrungen, verlangt aber eine angepasste Arbeitsweise: Kühlung bei Stahl und Guss sowie moderate Schnittgeschwindigkeit vermeiden Überhitzung und Bruchgefahr. Der Spitzenwinkel von 135° ist ausgelegt für härtere Werkstoffe; für sehr dünnwandige oder filigrane Bauteile sind alternative Verfahren zu prüfen. Für legierte und unlegierte Stähle bis etwa 900 N/mm² liefert die Kombination aus Material und Schliff zuverlässige Ergebnisse. Für präzise Tiefbohrungen empfehlen wir den HSS‑G geschliffenen Spiralbohrer von MetavCUT; bei Fragen technischen Umfangs oder zur Einsatzabstimmung steht METAV Werkzeuge per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 zur Verfügung Leistungsmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 53085-FDA Marke: MetavCUT Serie: Standard Line Ausführung: lang Norm: DIN 340 Daten: Durchmesser: 8,5 mm Gesamtlänge: 165 mm Spirallänge: 109 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 Ausführung EN: long FAQ Wie tief kann mit dem MetavCUT Spiralbohrer gebohrt werden? Die lange Ausführung des MetavCUT Spiralbohrers (SKU 53085-FDA) erlaubt tiefere Bohrungen als Standardbohrer; Maßgeblich sind jedoch Bohrmaschinensteifigkeit und Kühlung, daher empfiehlt METAV Werkzeuge die Verwendung stationärer Maschinen für maximale Tiefen. Ist der Bohrer für Edelstahl geeignet? Der HSS‑G Spiralbohrer von MetavCUT ist für härtere Werkstoffe konzipiert; der 135° Spitzenwinkel verbessert das Eindringen in Edelstahl, bei höherer Härte sind reduzierte Schnittgeschwindigkeiten und Kühlung ratsam. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer ist auch für Handbohrmaschinen geeignet, wobei bei tieferen Löchern oder hohen Vorschubkräften stationäre Aufnahme bevorzugt wird, um Rundlauf und Standzeit zu erhöhen. Welche Vorteile bietet der CNC‑Schliff gegenüber gewalzten Bohrern? Der geschliffene HSS‑G Bohrer von MetavCUT liefert schärfere Kanten und bessere Rundlaufgenauigkeit, was zu saubereren Bohrbildern und effizienter Spanabfuhr führt; das wirkt sich positiv auf Oberflächenqualität und Nachbearbeitung aus. In welchen Werkstoffen erzielt der Bohrer die besten Ergebnisse? Der MetavCUT Spiralbohrer 8,5 mm liefert besonders gute Ergebnisse in legierten und unlegierten Stählen, Gusseisen und Nichteisenmetallen; für sehr zähe oder gehärtete Materialien sollte geprüft werden, ob Vollhartmetall die wirtschaftlichere Wahl ist.
8.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, short HSS, Ø 8.6 mm, 118° tip, black, DIN 338 — MetavCUT The Twist Drill Type N short HSS is designed for precise metal drilling in hand and drilling machines, offering stability and clean starts for workshop and industrial use. Short HSS design for high stability Ø 8.6 mm for medium-diameter holes 118° tip for reliable centring on curved surfaces Type N normal spiral for metal drilling Conforms to DIN 338 for short twist drills Reliable HSS performance for demanding metalwork Manufactured from HSS (High Speed Steel), this Twist Drill targets the drilling of alloyed and unalloyed steel, cast iron and non‑ferrous Metals. The material choice provides a balanced combination of hardness and toughness, which supports sustained cutting performance under load. As a result, workshops benefit from consistent hole quality and extended tool life when processing common engineering materials. Short execution and Type N spiral for precision and stability The short design specified by DIN 338 reduces overhang and increases rigidity compared with longer variants, which minimises deflection and improves concentricity when drilling from chucks. The Type N normal spiral geometry is the classic solution for metal drilling, offering predictable chip evacuation and stable cutting behaviour in stationary and portable Drilling Machines. This leads to noticeably better guidance and fewer rejects in precision tasks. 118° tip for better centring and smoother starts A 118° tip provides a favourable compromise between easy centring and fast penetration for many common metals; the geometry supports accurate positioning even on slightly curved surfaces. Tip sharpening (outpointing) reduces the cross‑cutting edge width, which lowers friction and reduces necessary feed forces, improving centring and resulting hole finish. For operators this means quicker set‑up and fewer re‑drills while maintaining a clean bore. Practical advantages for workshops and maintenance teams The combination of HSS construction, short overall length and Type N spiral makes this Twist Drill particularly suitable for mechanical workshops, tool rooms and maintenance teams requiring reliable medium‑diameter holes. The geometry is also straightforward to resharpen, so machines with frequent use benefit from a tool that can be economically maintained. Its black finish improves visibility of wear and handling in busy production environments. Strong recommendation: Choose the MetavCUT Twist Drill Type N (Ø 8.6 mm, short HSS) for robust, precise metal drilling — for expert advice contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 40086-FDA Type: Type N Diameter: 8.6 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand Drill Application: Drills for metal Norm: DIN 338 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N from MetavCUT used for? The MetavCUT Twist Drill Type N is primarily used for drilling in metal; its short HSS construction and normal spiral make it suitable for precise holes in Alloyed and Unalloyed Steel, Cast Iron and Non‑Ferrous Metals in both workshop and maintenance environments. Can the MetavCUT Twist Drill be used with a hand drill or drilling machine? Yes, the MetavCUT Twist Drill Type N is designed for use in Drilling Machines and can also be employed with Hand Drills, though the short execution particularly benefits stationary setups where rigidity and concentricity are crucial. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high‑strength materials and larger drill diameters; its form is easy to grind and it withstands elevated loads, making it suitable for robust metalworking tasks. Which three drill types exist? The three common drill types are: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills sharpened (outpointed)? Sharpening reduces the cross‑cutting edge at the tip of the Twist Drill, which significantly lowers friction forces and thus requires less feed force; at the same time the tip centres better in the workpiece, improving accuracy. Can a metal Twist Drill be used to drill wood? A metal (HSS) Twist Drill can be used in wood but it generally provides poorer guidance and a less clean finish compared with dedicated wood drills; however, metal drills are easier to resharpen and show less self‑feeding behaviour.
8.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill – Short Twist Drill Type N, 8.6 mm, 135° Point Angle, 5% Cobalt‑Alloyed, Fully Ground, DIN 338, HSS‑E (MetavCUT) The Twist Drill is a short Type N drilling tool for precise metalworking in Drilling Machines, designed for high stability and clean bores in alloyed and unalloyed metals. Short HSS‑E Twist Drill for stable precision 8.6 mm Diameter with 135° Point Angle Fully ground shank for high runout accuracy Conforms to DIN 338 for short twist drills Higher Precision through Reduced Overhang for Consistent Holes Because of its short design the drill benefits from a reduced overhang, which significantly increases stability and reduces bending under load. This results in more consistent hole geometry and less vibration when working with tougher materials. For metalworkers who require repeatable results, the shorter flute length improves control and makes it easier to maintain concentricity even at higher spindle speeds. Material Composition and Grinding: Sharpness and Accuracy Manufactured from HSS‑E (High Speed Steel with 5% cobalt) and executed as fully ground, this twist drill delivers sharper Cutting Edges and excellent dimensional accuracy. The addition of cobalt increases hot hardness, improving wear resistance when drilling stainless or alloyed steels. Ground flutes offer superior Roundness and a cleaner finish compared with rolled alternatives, though users should consider appropriate cooling and tooling fixtures to mitigate fragility in highly loaded operations. Optimised Geometry for Harder Materials and Precise Entry The 135° Point Angle and Type N Normal Spiral geometry are selected to ease penetration into harder metals and to reduce Step‑in effects at the start of the hole. This geometry helps centre the tool and lowers the tendency to Skew on hard surfaces, making it suitable for stainless steel and tougher alloys encountered in workshop and industrial applications. Use of coolant and steady feeds will further extend tool life and hole quality. Suitable Uses and Target Users: Workshops and Professionals Engineered for use in Drilling Machines, this short twist drill is ideal for professional workshops, toolrooms and maintenance departments that prioritise accuracy over long reach. It is particularly effective when performing precision metal drilling tasks like mounting holes, component assembly, and repair work where straightness and roundness are critical. The product supports drilling in Alloyed Steel, Unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Plastics. Operational Tips and Durability Notes Adopt moderate spindle speeds and consistent coolant flow to exploit the 5% cobalt‑alloyed HSS‑E properties fully; this reduces the risk of thermal softening and tool wear. Because fully ground drills can be more brittle than rolled types, clamp the workpiece firmly and avoid excessive radial forces. For diameters below 6 mm the manufacturing process reduces breakage risk, but appropriate machine setup remains essential for long tool life. Strong recommendation: Choose the MetavCUT short HSS‑E Twist Drill for precise metal drilling — for technical questions or guidance METAV Werkzeuge provides expert support, contact info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill (Short, Type N, HSS‑E, 8.6 mm, 135°) Brand: MetavCUT SKU: 47086-FDA Diameter: 8.6 mm Point Angle: 135° Type: Type N Execution: Short Colour / Alloy: 5% cobalt-alloyed Shank Version: Fully ground Spiral Length: 81 mm Overall Length: 125 mm Application: Drills for Metal Material: HSS-E Standard: DIN 338 Suitable for Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill by MetavCUT (Type N)? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger bore diameters; its short form is easy to sharpen and endures higher loads, making it suitable for demanding metalworking tasks where durability and penetration into tough alloys are required. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Generally, the main drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drill family and is optimised for metalworking with a Type N spiral and HSS‑E composition. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cutting edge at the point of the Twist Drill, lowering friction and therefore the necessary feed forces while improving centring of the tip in the workpiece for more accurate starts. Can a metal Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are generally inferior compared with dedicated Wood Drills; metal drills are easier to re‑grind and have less self‑pulling tendency.
8.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) — Ø 8.6 mm · 135° tip · Type N · Bright finished · Short · DIN 338 · HSS‑G · MetavCUT The Twist Drill is a short HSS‑G metal drill designed for precise drilling in hard materials on Drilling Machines. Short design for higher stability and precision Conforms to DIN 338 for short twist drills 135° tip optimised for hard materials Fully ground shank for high concentricity Up to 40% faster drilling with reduced feed force Deliver faster, cleaner holes with a short HSS‑G design The short Twist Drill construction reduces overhang and vibration, which directly improves stability and hole quality. Thanks to the HSS‑G (ground High Speed Steel) geometry, cutting edges are sharper and concentricity is higher than rolled alternatives, leading to more consistent hole diameters and less rework. The reduced tendency to wander makes this drill particularly effective when accuracy matters, for example when preparing holes for threaded fastenings in metal components. Precision at the tip: why 135° helps with hard materials A 135° tip angle increases the contact area at the point and reduces the initial penetration aggressiveness compared with steeper tips, which helps when drilling stainless steel, cast and alloyed steels or hard plastics. The Type N normal spiral is the classic metalworking geometry and provides reliable chip evacuation and centre guidance. In practice, this means fewer retries, reduced burr formation and a cleaner finish on the workpiece. Suitable machines and material range for consistent results This short Type N Twist Drill is intended for metalworking on rotating machines and is suitable for both stationary Drilling Machines and compatible portable setups when rigidity is ensured. It is recommended for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The fully ground shank ensures tight clamping and low runout, improving tool life and repeatability in production environments. Handling advice to maximise performance and tool life Ground HSS drills can be more brittle than rolled types; therefore, apply moderate feed and appropriate cutting fluid when machining metals to avoid premature breakage. Correct speed and steady feed are essential: slower speeds and continuous coolant are advised for harder alloys. For precise positioning, use a pilot or centre punch before drilling. If uncertain about speeds, feeds or machine setup, expert advice is available from METAV Werkzeuge to match operating conditions to material and hole requirements. Choose MetavCUT quality for precision metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 45086-FDA Diameter: 8.6 mm Tip Angle: 135° Type: Type N Execution: Short Finish/Colour: Bright finished Material: HSS‑G Spiral Length: 75 mm Overall Length: 117 mm Shank Finish: Fully ground Standard: DIN 338 Intended Use: Drills for metal For Machine: Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for drilling in hard and high‑strength materials; it is especially suited to metalworking tasks such as holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, where precision and stability are required. Which three drill types exist? The three main drill categories are Metal drill, Wood drill and Stone/Concrete drill; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for machining metals. Why are twist drills pointed? The point geometry reduces the cross‑cut area at the tip, lowering friction and required feed forces; by sharpening (pointing) a Twist Drill the cutting forces decrease and the tip centres more reliably in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but the guidance is inferior and the hole finish is usually less clean compared with dedicated Wood drills; however, metal Twist Drills are easier to resharpen and show less self‑pulling action.
8.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 8.75 mm, 118° point angle, short HSS, black, DIN 338 A Twist Drill Type N designed for precise metal drilling in drilling machines and hand drills. HSS short Twist Drill, DIN 338 compliant 8.75 mm Diameter with 118° point angle 125 mm Overall length for stable handling Type N normal spiral optimized for metal Black finish for improved surface protection Precision and durability for demanding metalworking This short HSS Twist Drill combines material toughness with a compact design to deliver reliable performance in metal applications. The HSS material provides high wear resistance and good elasticity, making the bit suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. The short design reduces overhang and therefore vibration, which results in precise holes and a lower tendency to wander during drilling. Stability and handling that improve machining accuracy The reduced exposed length and 125 mm overall length increase stiffness and control when using a drilling machine or hand drill. The 81 mm flute length evacuates chips efficiently while maintaining rigidity, enabling consistent results in moderate deep holes. This combination supports clean hole geometry and repeatable centering, which is particularly important for workshop and maintenance tasks. Designed to the DIN 338 short‑drill standard for industrial use Manufactured to DIN 338, this short Twist Drill meets common shop standards for short spiral drills with cylindrical shank. The Type N normal spiral offers a reliable helix geometry for metal cutting, while the 118° point angle supports good centering behavior and is versatile across many metal types. For harder materials such as stainless steel, a steeper angle may be preferred, but the 118° point here balances penetration and chip formation for broad use. Practical guidance and safe working tips When working with this Twist Drill in metal, use appropriate spindle speeds and cutting fluid to extend tool life and improve surface finish. Start with lower speeds for larger diameters and increase coolant flow for heat management. Because the bit is a short version, it is less prone to bending — a benefit when precision is required. For occasional sharpening, the normal spiral geometry of this bit allows easier regrinding while retaining performance. Strong recommendation: the MetavCUT Twist Drill Type N is ideal for precision metal drilling — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 400875-FDA Diameter: 8.75 mm Point angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Flute length: 81 mm Overall length: 125 mm Colour: black For drill: Drilling Machine / Hand Drill Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended for metalworking and is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics; its HSS composition provides the hardness and elasticity needed for these materials. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; its shape allows comparatively easy resharpening and it withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials adapted to their specific applications.
8.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise, geschliffene HSS‑Geometrie und 135° Spitzenwinkel sorgen für stabile, präzise Bohrungen in harten Werkstoffen. Die kurze Ausführung reduziert die Auslenkung und ermöglicht schnelleres Bohren bei geringer Anpresskraft. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer kurz von MetavCUT, Typ N Der Spiralbohrer kurz eignet sich für präzise Metallbohrungen an stationären und handgeführten Maschinen und bietet hohe Stabilität bei harten Werkstoffen. HSS‑G geschliffen für hohe Schärfe und Rundlauf 135° Spitzenwinkel für harte Werkstoffe Kurze Ausführung erhöht Stabilität und Präzision Spirallänge 81 mm für sichere Spanabfuhr DIN 338 Norm für kurze Spiralbohrer Stabilität und Präzision bei drehenden Maschinen Die verkürzte Bauform reduziert die Auskraglänge und minimiert so Vibrationen und Verbiegen während des Bohrens. Dadurch entsteht eine höhere Stabilität, die besonders bei mittelgroßen Durchmessern spürbar ist. Der Einsatz einer Handbohrmaschine oder einer stationären Bohrmaschine wird durch die kompakte Länge erleichtert, was saubere Bohrbilder und verbesserte Rundlaufwerte zur Folge hat. Für Anwender bedeutet das weniger Nacharbeit und präzisere Passungen. Effizienz durch geschliffene HSS‑Geometrie und optimierten Spitzenwinkel Die geschliffene HSS‑G Geometrie liefert sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit. In Kombination mit dem 135° Spitzenwinkel dringt der Bohrer leichter in harte Materialien ein und reduziert das Ausbrechen an der Austrittskante. Technisch bewirkt das bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Bohrern, was die Produktivität in Werkstatt und Produktion erhöht. Vielfältige Einsatzgebiete und Praktische Hinweise Der Bohrer eignet sich für legierte und unlegierte Stähle, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe. Als Vertreter des Standard‑Bereichs ist er ideal für Werkstatt‑ und Montagearbeiten sowie für anspruchsvolle DIY‑Projekte. Bei hoher Präzision empfiehlt sich zuvor ein Zentrierbohrer, um ein Wandern des Bohrers zu vermeiden. Kühlung bei zähen Werkstoffen verlängert die Standzeit und sorgt für konstant gute Ergebnisse. Handhabung, Sicherheit und Lebensdauer Die geschliffene Herstellung verlangt umsichtiges Handling: Plötzliche Biegung soll vermieden werden, da geschliffene Werkzeuge spröder reagieren können. Für lange Standzeiten sind kontrollierte Schnittgeschwindigkeit, ausreichende Kühlung und eine stabile Werkzeugaufnahme empfehlenswert. Die Kombination aus kurzer Ausführung und geschliffener Spirale führt zu saubereren Bohrlöchern und reduziert Nacharbeit in der Fertigung. Kaufen Sie den Spiralbohrer von MetavCUT über Metav Werkzeuge und profitieren Sie von präziser Geometrie und robuster Anwendung; bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 450875-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Typ: Typ N Norm: DIN 338 Daten Durchmesser: 8,75 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G — Schnellarbeitsstahl, geschliffen Schaftausführung: geschliffen — volle Schaftbearbeitung für hohen Rundlauf Ausführung: kurz — reduzierte Auskraglänge für erhöhte Stabilität Einsatzgebiet: legierter und unlegierter Stahl, Guss, Nichteisenmetalle, Hartkunststoff Spirallänge 81 mm — unterstützt sichere Spanabfuhr DIN 338 — Norm für kurze Spiralbohrer mit Zylinderschaft Typ N — Normalspirale, klassisch für Metallbearbeitung Farbe: blank — helle, glänzende Oberfläche Geeignet für: Handbohrmaschine und stationäre Bohrmaschinen FAQ Wie ist der Spiralbohrer für harte Werkstoffe ausgelegt? Der Spiralbohrer von MetavCUT ist mit HSS‑G geschliffen und einem 135° Spitzenwinkel ausgestattet, wodurch er sich besonders für harte Werkstoffe wie legierten Stahl und Gusseisen eignet und saubere Bohrlöcher erzeugt. Welche Maschinen sind für den Einsatz geeignet? Die kurze Ausführung wurde für den Einsatz an Handbohrmaschinen und stationären Bohrmaschinen entwickelt; bei Verwendung an mobilen Geräten sorgt die reduzierte Auskraglänge für mehr Stabilität und geringeres Verbiegen. Welche Vorteile bietet die geschliffene Ausführung gegenüber gewalzten Bohrern? Geschliffene Bohrer liefern schärfere Kanten und höhere Rundlaufgenauigkeit, was zu präziseren Bohrungen führt. Der Spiralbohrer MetavCUT als HSS‑G bietet diese Vorteile, verlangt jedoch schonendere Handhabung und Kühlung. Gibt es Empfehlungen zur Spanabfuhr und Kühlung? Dank der Spirallänge von 81 mm ist die Spanabfuhr verbessert; bei zähen oder dicken Werkstoffen empfiehlt sich zusätzliche Kühlung, um Werkzeugverschleiß zu reduzieren. Welche Norm und Typenbezeichnung hat der Bohrer? Der Bohrer entspricht der DIN 338 und wird als Typ N geführt, die Norm beschreibt kurze Spiralbohrer mit Zylinderschaft und die Typenbezeichnung steht für die Normalspirale für Metall.
8.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — 8.7 mm, 118° tip, short, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a short High Speed Steel drill bit designed for precise metal drilling with hand or drilling machines. Short design for increased stability and precision HSS material for metalworking durability 8.7 mm diameter for standard metal holes 118° tip angle for reliable centring Conforms to DIN 338 short twist drill specification Reliable rigidity for precision metalworking A short HSS twist drill with a Type N spiral offers clear benefits where accuracy matters. The reduced overhang and the 81 mm spiral length together with an overall length of 125 mm reduce deflection and vibration during drilling, resulting in cleaner holes and longer tool life. This geometry is particularly advantageous for workshop and maintenance tasks where repeatable hole quality is required. The roll-formed or ground cutting edges deliver consistent cutting behaviour across common ferrous and non-ferrous metals. Standardised design that supports consistent results Compliance with DIN 338 identifies this bit as a short twist drill with a cylindrical shank, engineered for machine and hand-tool use. The short format increases stability and makes the tool less prone to bending under load, which benefits precision fitting and assembly processes. Users benefit from predictable tool behaviour and easier tool handling when switching between similar machines, while manufacturers achieve repeatable hole tolerances as required in many metalworking applications. Practical compatibility and drilling behaviour The 118° tip angle helps the drill centre reliably on slightly contoured surfaces and reduces the tendency to wander during the initial contact. As a Type N bit, it is the classic geometry for metal drilling and is suited for alloyed and unalloyed steels, cast iron and many non-ferrous metals. The cylindrical shank enables secure clamping in standard chucks of both hand and drilling machines, and the short construction aids chip evacuation and cooling when used with appropriate cutting fluids. Who gains most from this short HSS bit Metalworkers, toolroom technicians and maintenance engineers will appreciate the combination of HSS toughness and the short format for tasks that require repeatable precision. The design reduces the risk of breakage during moderate feeds and supports efficient workshop workflows. Produced by MetavCUT, this bit is a reliable choice for industrial repairs, prototype shops and technical training environments where durability and consistent drilling performance are essential. We recommend the MetavCUT Type N short Twist Drill for precision metalwork — for personalised technical advice and application support please contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40087-FDA Diameter: 8.7 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Execution: short Type: Type N Material: HSS (High Speed Steel) Colour: Black Suitable for: Hand Drill / Drilling Machine Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is primarily used for machining metal; it performs well on alloyed and unalloyed steels, cast iron and many non-ferrous metals where a short, stable drill is required for precise holes. Can the MetavCUT Twist Drill Type N be used with a hand drill? Yes, the MetavCUT Twist Drill Type N is suitable for both hand drills and machine drilling when clamped securely; its short form reduces bending and improves accuracy in handheld applications. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and larger drill diameters. This shape is easy to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? The main categories are Metal drills, Wood drills and Stone/Concrete drills. Why are twist drills pointed? Pointing reduces the chisel edge at the tip, lowering friction and therefore requiring less feed force; it also improves centring of the drill tip in the workpiece. Can a twist drill be used to drill wood? A metal twist drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal bits are easier to re-sharpen and have less aggressive self-feed.
8.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Type N) — 8.7 mm, 135°, Short, 5% Cobalt‑Alloyed, HSS‑E, DIN 338 The Twist Drill (Type N) is a short HSS‑E metal drill designed for precise drilling in hard and alloyed steels using a Drilling Machine. Twist Drill Type N by MetavCUT 8.7 mm Diameter for precise metal holes 135° Tip for harder materials Short design improves stability and accuracy HSS‑E with 5% Cobalt for increased heat resistance Precision and Durability for Tough Metals Designed as a short Type N bit, this HSS‑E Twist Drill delivers high stability and reduced deflection thanks to its shorter overhang. The 5% cobalt alloy increases red‑hardness and thermal resistance, so heat buildup during high‑speed metal drilling is better tolerated, extending tool life. For users who require repeatable, clean holes in Alloyed Steel and Stainless Steel, the shorter geometry directly translates into improved hole quality and fewer rejects. Optimised Geometry for Clean, Accurate Holes With a 135° tip angle and a fully ground flute geometry, the tool enters harder materials with less walking and lower axial force. The grinding process creates sharp cutting edges and excellent concentricity, resulting in precise bores and smooth chip evacuation. For customers unfamiliar with cutting geometry: the larger tip angle reduces penetration aggressiveness and is recommended for harder workpieces such as stainless steels. Suited Use Cases and Who Benefits This short, Type N HSS‑E drill is particularly appropriate for machinists and professionals working on metal fabrication, maintenance, and toolmaking. The stable design makes it ideal for drilling on bench or column Drilling Machines where rigidity matters most. If occasional mobile hand‑drilling is needed, the bit still performs, but best results are achieved with a steady, well‑clamped setup. Standards, Manufacturing and Practical Advice Manufactured to DIN 338 and available in a fully ground shaft execution, the bit conforms to recognised short twist‑drill specifications for industrial use. Ground (HSS‑G) drills offer superior roundness and cutting precision compared to rolled counterparts, though they can be less tolerant of shock loads. For prolonged runs, use appropriate cutting fluid and moderate feed rates to maximise tool life and hole quality. MetavCUT recommends this short HSS‑E Twist Drill for demanding metalworking tasks — for expert guidance and application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke/Hersteller: MetavCUT SKU: 47087-FDA Typ: Type N Durchmesser: 8.7 mm Spitzenwinkel: 135° Ausführung: short Material: HSS‑E Farbe: 5% cobalt-alloyed Schaft Ausführung: fully ground Gesamtlänge: 125 mm Spirallänge: 81 mm Für Bohrmaschine: Drilling Machine Norm: DIN 338 Modellserie: Standard Line Anwendung: Drills for metal Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (Type N) from MetavCUT used for? The MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger drill diameters; its short form is easier to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? Commonly, drill types are divided into Metal Drills, Wood Drills and Stone/Concrete Drills, and the MetavCUT Twist Drill (Type N) is the standard choice among metal drills.
8.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short HSS‑G, 8.7 mm, 135°, Bright Finished, DIN 338 The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking in Drilling Machines, offering high stability and clean holes for demanding industrial applications. Short HSS‑G design for higher stability 8.7 mm diameter for precision metal drilling 135° point for hard materials like stainless steel Fully ground shank for high runout accuracy DIN 338 standard for consistent quality Improved stability and faster cutting for metalworking Short design increases rigidity: the short Twist Drill reduces overhang and resists bending, which improves positional accuracy during drilling. The HSS‑G (ground High Speed Steel) geometry enables significantly faster material removal — the manufacturer information cites up to 40% faster drilling with 50% less feed force compared with conventional HSS drills — which directly translates into shorter cycle times and lower operator effort when working with steels and other tough metals. Tip geometry tailored for harder materials A 135° point angle is specified to ease entry into hardened surfaces and to reduce chipping when drilling stainless and alloyed steels. For non‑specialists: a larger point angle flattens the tip, spreading cutting forces and reducing the tendency for the drill to "grab", so holes start cleaner and tool life improves under correct cooling and feed. The drill conforms to the Type N normal spiral profile, making it particularly suitable for metal applications rather than soft woods. Precise shank and manufacturing quality for consistent results The fully ground shank and ground flute geometry produce high concentricity and sharp cutting edges. Grinding (HSS‑G) rather than roll‑forming creates very sharp cutting lips and excellent roundness, which yields cleaner holes and better dimensional accuracy. Users should note that ground drills can be more brittle than rolled types and therefore benefit from using appropriate coolant and secure clamping in the machine. Intended applications and user recommendations Designed primarily as a Drill for Metal, this short Twist Drill excels in workshop and production environments where repeatable accuracy is required: toolrooms, maintenance departments and metal fabrication shops. The 8.7 mm size and 125 mm overall length make it well suited to standard drilling tasks on lathes and drilling machines, especially when drilling in alloyed or unalloyed steel, cast materials and hard plastics. For novice users, using moderate feed and coolant will extend tool life and maintain hole quality. For precision metalwork, choose the MetavCUT short HSS‑G Twist Drill — METAV Werkzeuge provides expert advice and ordering support: eMail info@metav-werkzeuge.com · Phone +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45087-FDA Diameter: 8.7 mm Spiral length: 81 mm Total length: 125 mm Point angle: 135° Type: Type N Execution: short Finish / Colour: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Packaging unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; it is suitable for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper castings, non‑ferrous metals and hard plastics. The short HSS‑G geometry supports precise drilling in harder materials when used with suitable coolant and machine setup. How does the 135° point angle affect drilling performance with the MetavCUT Twist Drill? A 135° point angle on the MetavCUT Twist Drill reduces initial penetration forces and improves centring on hard materials; this larger angle shortens the effective cutting time and helps prevent chipping at the entry, provided the drill is used with appropriate feed and cooling. For what is a Twist Drill mainly used? A Twist Drill is most commonly applied to the machining of high‑strength materials and larger hole diameters. It is easy to regrind and withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types are there? There are three main drill families: Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for that purpose. Why are Twist Drills sharpened (pointed)? Pointing the tip reduces the cross‑cut at the drill’s tip, which lowers friction and consequently the required feed force; this also improves the drill’s ability to self‑centre in the workpiece for cleaner starts. Can a Twist Drill be used for drilling wood? A metal Twist Drill can be used in wood, but guidance and finish are typically inferior to a dedicated wood bit. Metal drills are easier to resharpen and have lower self‑feed, so they are usable in a pinch but do not give as clean results as wood‑specific bits. At which depths is the Twist Drill most used? Solid drilling is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect. When choosing between HSS and HSSE, evaluate whether the specific working conditions justify the higher cost of HSSE material.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com