Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
300mm Setting Gauge Metric 60 - Microtech Metrology
Take advantage of a 300 mm reference length combined with Metric 60 compatibility for reliable instrument setup and reduced adjustment time; order the setting gauge directly via Metav Werkzeuge or consult our specialists for application advice. Setting Gauge (Einstellmaß) — 300 mm Metric 60 by Microtech Metrology The Setting Gauge (Einstellmaß) is a rigid calibration standard intended for setting and checking measuring instruments in workshops and metrology laboratories. 300 mm nominal reference length Metric 60 compatibility Stable, low-deformation design Accessory for precision metrology Consistent reference for repeatable setups A solid reference length of 300 mm delivers a balance of reach and stiffness, which simplifies the alignment and setting of measuring instruments. The gauge’s Metric 60 specification ensures clear compatibility with metric-threaded fixtures or accessories that require this standard, reducing conversions and setup ambiguity. As a result of the dimensional stability, adjustments are completed faster and with fewer repeat measurements, supporting efficient workflows in production and inspection. Minimise adjustment time through robust design Made to function as a workshop-grade reference, the gauge emphasises mechanical stability and ease of use. The rigid construction reduces flexing during handling, which translates into fewer re-measurements and a lower risk of process interruptions. This practical reliability supports continuous operation in machine shops and inspection benches, yielding measurable time savings over routine calibration and setting tasks. Traceable reference and clear identification for quality processes Marked identification and catalog data aid in traceability within quality management systems. The item integrates easily into documented measurement routines and can be listed in inspection plans as a defined reference standard. Combined with Metav’s position as a precision supplier, the gauge contributes to a transparent supply chain and dependable stock handling for serial production environments. For dependable setting standards from Microtech Metrology, contact Metav Werkzeuge in Emmerich to discuss suitability for specific fixtures or to arrange supply through our distribution channels Technical data Article number: 110710030 GTIN: 4061905459245 Manufacturer: Microtech Metrology Length: 300 mm Facts Nominal length: 300 mm SKU: 110710030 Special features Metric 60 specification Category: Accessory for measuring devices Intended use: Reference and instrument setting FAQ What is the primary purpose of this setting gauge? The setting gauge is designed as a rigid reference for setting and checking measuring instruments, providing a reproducible 300 mm baseline for alignment and calibration tasks. Is the gauge compatible with metric-threaded fixtures? Yes. The Metric 60 designation indicates compatibility with metric-threaded accessories and fixtures that reference this standard. Can this reference be used in a production inspection routine? The gauge is suitable as a documented reference in production inspection routines, supporting repeatable setups and integration into quality procedures. Which brand manufactures this setting gauge? This reference is supplied by Microtech Metrology and distributed via the Metav supply channels as an accessory for precision metrology. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Setting Gauge Whitworth 55 - Microtech Metrology
Taking advantage of the 300 mm length together with Whitworth 55 compatibility delivers consistent set‑ups and reliable repeatability for workshop and inspection tasks; purchase and procurement can be handled directly via Metav Werkzeuge or reviewed with a Metav consultant for process fitment. Setting gauge – 300 mm Whitworth 55 by Microtech Metrology The setting gauge is a precision workshop accessory designed for setting and checking Whitworth 55 thread references and for use as a stable reference in production and inspection environments. 300 mm length for extended reach Whitworth 55 thread compatibility Robust design for repeatable set‑ups Accessory for measuring devices and inspection Accurate set‑up across the production chain The principal benefit of a 300 mm reference piece lies in its ability to bridge bench and machine‑level workflows: its length provides reach for larger components while remaining manageable for single‑person handling. As a dedicated Whitworth 55 reference, the article ensures that thread gauges and measuring fixtures are aligned to a known standard, reducing set‑up time and cutting the risk of incorrect assembly. The stable geometry of this accessory supports repeatability, which is essential where short cycle times meet strict quality gates. Designed for dependable inspection and calibration workflows Integrating a compact reference component into standardised inspection procedures simplifies daily routines. The product is intended as an accessory for measuring devices and offers a simple method to verify or set instruments before use, thereby preventing drift-driven errors. The rugged construction contributes to long service life and fewer replacements, supporting continuous operation in metalworking and maintenance shops. By reducing variation at the start of a measurement chain, the device helps maintain process capability and reduces rework. Practical applications in workshop and quality control Typical applications include pre‑check of thread gauges, setting-up of optical comparators and confirming fixture alignment in small‑batch production. Because the device is explicitly matched to Whitworth 55 threads, it is particularly useful in environments handling legacy or specialist British Standard Whitworth fasteners. When used as part of a documented inspection routine, the accessory strengthens quality evidence and supports traceable measurement practices within the production process. For advice on integrating the Microtech Metrology 300 mm setting gauge into existing inspection procedures, contact Metav Werkzeuge for procurement and technical support to ensure the accessory meets the required application. Technical Data Article number: 110720030 GTIN: 4061905460081 Manufacturer: Microtech Metrology Facts Length: 300 mm Special features Whitworth 55 compatibility Category: Measuring devices accessory SKU: 110720030 FAQ What is the primary purpose of the setting gauge? The setting gauge from Microtech Metrology serves as a reference for setting and checking Whitworth 55 thread gauges and for aligning measuring fixtures in inspection routines. Can this accessory be used for other thread standards? This specific item is configured for Whitworth 55 compatibility; alternative standards require a differently specified reference or an adapter. Is the 300 mm length suitable for machine set‑ups? The 300 mm length provides reach for many bench and machine set‑ups and offers a balance between accessibility and stiffness for reliable checks. Does the product include a traceability label or additional documentation? Documentation included with the accessory identifies the SKU and manufacturer details; for formal calibration certificates request details from Metav Werkzeuge at procurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300xØ29 Extension for Three-Point Internal Micrometer Compatible with Series M312.146/M312.157/M312.256/M312.267 - Metav IndustryLine
Extend measuring reach and preserve alignment with the M312.155 extension: its 300 mm length and Ø29 mm profile convert three-point internal micrometers into reliable large-range gauges, while direct compatibility with the M312.146–M312.157 and M312.256–M312.267 series cuts integration time. Order the extension via Metav Werkzeuge or ask the team for application guidance. M312.155 Extensions — 300 mm × Ø29 mm for three-point internal micrometers (Metav IndustryLine) The M312.155 is an extension engineered to increase the measuring range of three-point internal micrometers for large-bore internal measurements in workshops and metrology environments. 300 mm extension Ø29 mm Compatible with series M312.146–M312.157 Accessory for three-point internal micrometers Reach larger bores without compromising stability Adding a dedicated extension increases the effective measuring range while keeping the sensing geometry intact. The 300 mm length and Ø29 mm shank are specified to maintain axial alignment with the micrometer head, which reduces probe tilt and measurement scatter on large diameters. For production and quality-control tasks, this means fewer setups and faster throughput, because larger components can be measured without constructing temporary fixtures. The design supports reproducible contact and stable centring over the extended span. Fast fit and reliable compatibility with existing systems Compatibility with the M312.146–M312.157 and M312.256–M312.267 series ensures straightforward integration into existing three-point internal micrometer setups. The extension is intended as a direct mechanical add-on, avoiding adaptations that can introduce runout. This reduces downtime during retrofits and simplifies tooling logistics: the same micrometer head can be used across a wider range of components. The clear series matching cuts procurement complexity and helps maintain a consistent measurement chain. Practical benefits for workshop and laboratory use Using a purpose-made extension minimises handling and measurement uncertainty compared with improvised solutions. For calibration routines and repeat inspections, a dedicated extension provides defined geometry that supports traceability and consistent repeatability. The unit’s compact mass assists in handling while preserving stability, making it suitable for bench-mounted metrology and light workshop use. Where repeatable bore measurements are required, the extension helps preserve the original instrument’s performance over an extended range. For precise large-bore measurements, request the M312.155 extension from Metav Werkzeuge in Emmerich; Metav’s specialists can confirm compatibility and delivery options by phone or e‑mail. Technical data SKU: M312.155 GTIN: 4054469119618 Manufacturer: Metav IndustryLine eClass: 21019104 ETIM: EC002219 Key dimensions Extension: 300 × Ø29 mm Weight: 1 kg Tariff number: 90173000 Compatibility / Special features Compatible with series M312.146–M312.157 and M312.256–M312.267 Accessory for three-point internal micrometers Category: Accessories (Zubehör) FAQ What is the total extension length and shank diameter? The extension measures 300 × Ø29 mm as delivered with the M312.155 and is specified to extend the reach of three-point internal micrometers. Which micrometer series does this extension fit? This accessory is compatible with the M312.146–M312.157 and M312.256–M312.267 series and is intended for use with three-point internal micrometers. Is the extension supplied ready to use on the micrometer? The product is a mechanical extension for the three-point internal micrometer system; mounting is performed according to the micrometer series’ interface and does not require additional adapters when matched to the listed series. What is the weight of the extension? The M312.155 has a mass of 1 kg, which supports stable handling while limiting added inertia during measurement. Does the product data state the material or coating used? The provided product data does not specify material or coating for this extension. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300–1000mm Anvil for Large-Range Bore Gauges Replacement Anvil – Metav IndustryLine
Take advantage of a workshop-grade replacement part that restores measurement reliability while reducing downtime: a precision-machined measuring anvil compatible with large-range micrometers, offering a robust contact surface and simple change-out to keep inspection routines running. Order the part directly via Metav Werkzeuge or consult Metav's specification team for fit confirmation. Measuring Anvil M304.033.1 — Replacement anvil for micrometers, suitable for 300–1,000 mm The Measuring Anvil M304.033.1 is a purpose-made replacement anvil for large-range micrometers, designed to restore accurate contact geometry and maintain consistent results across heavy-duty measurement tasks. Replacement anvil for micrometers from 300 mm Precision‑machined contact surface Sturdy construction, workshop‑grade Precision restored for large-range inspection The replacement anvil brings back the original contact geometry that is essential for reproducible measurements on large components. Designed for micrometers with measuring ranges from 300 to 1,000 mm, the anvil restores the instrument’s repeatability and reduces measurement uncertainty caused by worn or damaged faces. The component's precision‑machined contact surface ensures a defined seating and stable contact point, so routine checks and process controls remain reliable without complex recalibration procedures. Built for durability and straightforward maintenance Manufactured to workshop standards, the anvil combines a rugged design with a finely finished contact area to withstand repeated use in industrial environments. The sturdy construction reduces the risk of deformation under regular loading, while the modest mass aids handling during replacement—this unit is listed at 1 kg. As an accessory part, the anvil is intended for straightforward replacement of worn faces, enabling fast maintenance cycles that limit machine downtime and keep inspection workflows efficient. Compatibility and application context This accessory suits measurement benches and inspection setups where micrometers are used for large-format components such as housings, shafts and fixture elements. It is classed for the large-range measurement segment (measuring ranges up to 1,000 mm), where sufficient profile stiffness and reliable contact geometry are decisive for longitudinal reproducibility. The anvil functions as a direct replacement part and is supplied as a metrology accessory to support ongoing production and quality‑control tasks. Contact Metav Werkzeuge to confirm fitment for Metav IndustryLine instruments and secure the M304.033.1 replacement anvil for uninterrupted measurement workflows Technical Data Article number: M304.033.1 GTIN: 4054469115917 Eclass: 21043590 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Weight: 1 kg Suitability: micrometers with measuring range 300–1,000 mm Category: Accessories (Zubehör) Special features Measuring anvil for micrometers Replacement part for large-range micrometers Precision‑machined contact surface Workshop‑grade construction FAQ Which micrometers is this anvil compatible with? The M304.033.1 measuring anvil is compatible with micrometers specified for measuring ranges from 300 mm up to 1,000 mm and is supplied as a replacement accessory for Metav IndustryLine large-range micrometers. Is material or coating specified for the anvil? The product data for the M304.033.1 does not specify the material or coating of the anvil; only its function as a replacement measuring face and its suitability for large-range micrometers are recorded. Does the part include a calibration certificate? No calibration certificate is stated in the available product information for this replacement anvil; calibration status is not specified in the provided data. How is the anvil installed on the instrument? The anvil is intended as a direct replacement measuring face and should be fitted to the micrometer according to the instrument manufacturer's assembly procedure to ensure correct seating and alignment. For which applications is this anvil intended? The M304.033.1 is intended for workshop and inspection use where large-format components are measured with micrometers, restoring reliable contact geometry for routine quality checks and process control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300–325 mm Precision Micrometer With 35 mm Anvil, Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high absolute precision and modern data connectivity for reliable inspection of medium-sized assemblies; the combination of a 1.54" touchscreen, robust 35 mm disc measuring faces and wireless + USB output ensures fast traceable results—order directly via Metav Werkzeuge or consult our specialists for integration support. Microtech Metrology digital micrometer (300–325 mm) — Touchscreen, Wireless & USB The Microtech Metrology digital micrometer is a purpose-built inspection instrument for medium-sized components, combining a clear 1.54" touchscreen with wireless and USB data transfer for efficient quality control workflows. Wireless and USB data output Touchscreen 1.54″ display Measuring range 300–325 mm ISO 17025 calibration certificate included Precise measurement for medium-sized assemblies This instrument delivers high repeatability for components in the medium range thanks to a measuring span of 300–325 mm and 35 mm disc measuring faces that distribute contact force evenly. The non-rotating measuring spindle reduces surface damage on delicate parts and stabilises the contact geometry during each shot, which helps achieve consistent readings. With a specified accuracy of ±0.009 mm the device is suitable for demanding workshop inspection tasks where reproducible dimensional documentation matters. Fast data capture and streamlined process integration Equipped with both Wireless and USB data outputs plus a touchscreen 1.54" display, the instrument shortens the path from measurement to analysis. Readings are presented immediately on the digital display with an indicated display resolution of 0.0001 mm, enabling fine discrimination of dimensional changes during set-up, run-in or batch inspection. This digital connectivity supports statistical process control and reduces transcription errors common with manual recording, improving throughput and traceability. Traceable calibration and ready-to-use delivery The device is supplied fully calibrated under ISO 17025 and includes a calibration certificate, so it is ready for immediate use in documented quality systems. Delivery with an accredited certificate simplifies incoming inspection and audit preparation, demonstrating metrological compliance. The overall design balances user-friendly operation and industrial robustness, providing a practical measurement solution for production and lab environments where documented accuracy is a procurement requirement. Discuss application specifics and delivery options with Metav Werkzeuge to equip inspection benches with Microtech Metrology micrometers; our Emmerich-based team provides technical advice and certified calibration services Technical data Article number: 110783257 GTIN: 4061905457562 Manufacturer: Microtech Metrology Category: Micrometers Digital display: Touchscreen 1.54″ Facts Measuring range: 300–325 mm Accuracy: ±0.009 mm Display resolution: 0.0001 mm Measuring face diameter: Ø35 mm Special features Wireless and USB data output Non-rotating measuring spindle Digital operation with touchscreen Delivered calibrated to ISO 17025 with certificate FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 300–325 mm, making it suitable for medium-sized components and assemblies. Is the instrument delivered calibrated and traceable? Yes, the unit is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceable quality assurance. Which data interfaces are available for exporting readings? The micrometer supports Wireless and USB data outputs to integrate measurements into SPC or documentation systems. What accuracy and resolution can be expected during inspections? The device specifies an accuracy of ±0.009 mm and a display resolution of 0.0001 mm, providing fine discrimination for workshop and QA use. Are the measuring faces suitable for delicate surfaces? The instrument uses Ø35 mm disc measuring faces together with a non-rotating spindle, a combination that reduces surface stress and helps protect delicate parts during measurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300–325 mm Three-Point Internal Gauge For Blind Holes With Carbide Measuring Faces, Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of the combination of precise three‑point internal measuring, carbide measuring faces and a ratchet stop for repeatable blind‑hole checks; order directly via Metav Werkzeuge or consult the technical team for application advice. Three‑point internal micrometer M312.156.S — 300–325 mm, carbide faces (Metav IndustryLine) The Three‑point internal micrometer M312.156.S is an analogue instrument designed for precise measurement of blind holes and large bores in workshop and inspection environments. Three‑point internal measuring principle Carbide measuring faces for long wear resistance Ratchet stop for consistent contact force Large bore range 300–325 mm Reliable three‑point measurement for blind holes The three‑point measurement system translates circumferential contact into a central diameter value, making it particularly effective for blind‑hole measurement where single‑edge probes fail to centre reliably. With a stated accuracy of 0.012 mm and a vernier reading of 0.005 mm, the instrument delivers a balance of resolution and real‑world repeatability. The inclusion of a ratchet stop helps to ensure a constant measuring force across successive readings, reducing operator‑induced variance and supporting efficient quality control routines on production lines. Built for large‑bore inspection and robust handling Covering a measuring range 300–325 mm and a measuring depth 140 mm, this micrometer is configured for sizeable internal diameters such as housings, flanges and large bores in machining and assembly work. The scale and vernier are matt chrome‑plated, which reduces reflections and improves legibility under workshop lighting. Carbide measuring faces provide wear resistance when used on standard ferrous and non‑ferrous materials, extending service life and maintaining accuracy between calibrations. Note that the delivery is supplied without setting ring, so plan for the necessary calibration or reference ring in your inspection setup. Practical benefits: reproducibility, serviceability and integration As an analogue vernier instrument it requires no batteries and offers straightforward field use with minimal maintenance; the mechanical design emphasises accessibility for inspection and calibration tasks. The robust construction suits regular handling in busy shops while carbide faces reduce wear, limiting downtime for part replacement. For procurement and traceability, the tool is offered through Metav IndustryLine and benefits from Metav’s European distribution and quality filtering in Emmerich — a combination that supports dependable supply and clear documentation for industrial customers. Contact Metav Werkzeuge for a tailored application assessment or to procure the Metav IndustryLine three‑point internal micrometer M312.156.S directly from their Emmerich facility; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M312.156.S GTIN: 4054469158761 Category: Micrometers Type: Analogue (vernier) Core technical data Measuring range: 300–325 mm Measuring depth: 140 mm Accuracy: 0.012 mm Reading (vernier): 0.005 mm Weight: 12 kg Special features Carbide measuring faces Ratchet stop for consistent contact force Matt chrome‑plated scale and vernier Suited for blind‑hole measurement Delivery without setting ring FAQ How does the three‑point principle improve blind‑hole measurements? The three‑point internal micrometer M312.156.S uses three equidistant contacts to centre within the bore, which converts bore geometry into a reliable diameter reading suitable for blind‑hole applications. What accuracy and reading resolution can be expected? The instrument offers an accuracy of 0.012 mm with a vernier reading of 0.005 mm, providing a practical compromise between resolution and workshop robustness for the Metav IndustryLine micrometer. Are the measuring faces wear‑resistant for frequent shop use? Yes, the tool is fitted with carbide measuring faces that significantly reduce wear and help maintain measurement integrity during regular inspection cycles. Is a setting ring included with the micrometer? No, delivery of the M312.156.S is supplied without a setting ring; a separate reference or calibration ring is required for traceable zeroing. Can this micrometer measure deep bores? With a measuring depth of 140 mm and a range of 300–325 mm, the device is intended for relatively deep bores and large internal diameters encountered in heavy‑duty components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300–350mm Bore Gauge Micrometer Digital Wireless/USB, 110mm Depth, Ø8mm Measuring Faces, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration, wireless data output and a wide measurement range 300–350 mm for reliable workshop measurement and faster traceability. Order the instrument directly via Metav Werkzeuge or contact their consultants for application advice. Outside micrometer by Microtech Metrology — digital, Wireless + USB connectivity The Outside micrometer is a digitally read micrometer designed for medium‑format components and workshop quality control, providing precise external measurements across a 300–350 mm range. Digital micrometer with Wireless and USB output Measurement range 300–350 mm for medium assemblies ISO 17025 calibrated with certificate included Measuring faces Ø8 mm and 110 mm measuring depth Achieve consistent tolerances with fine resolution and proven accuracy The instrument delivers an accuracy ±0.008 mm paired with a resolution 0.0001 mm, ensuring that dimensional checks meet stringent production tolerances. Such precision reduces the risk of scrap and rework by making deviations visible early in the process. The digital readout eliminates analogue reading errors and the high resolution supports tighter control in serial production and spot checks on large assemblies. This level of performance is particularly valuable where repeatable, verifiable measurement results feed into quality reports. Designed for medium‑range components and easier handling Built for the medium measurement class, the tool covers 300–350 mm, a span that balances reach and rigidity for fixtures, housings and larger machined parts. The Ø8 mm measuring faces and 110 mm measuring depth allow secure contact on curved and recessed surfaces without compromising stability. The form factor is optimised to keep the frame stiff across the whole span, which is essential for reproducible readings over longer dimensions; this yields practical benefits during assembly checks or jig validation, where a single instrument must serve multiple tasks. Connected data output for modern quality systems Equipped with Wireless + USB data output, the device supports straightforward data capture and integration with digital inspection systems. The connectivity simplifies logging of measurements into statistical process control or measurement databases, reducing transcription errors and accelerating reporting cycles. Delivered ISO 17025 calibrated with a calibration certificate, the instrument offers documented traceability for audits and supplier quality chains, making acceptance and certification processes more efficient. Practical operation, traceability and workshop readiness As a digital micrometer, the instrument is simple to operate and requires minimal training for workshop staff. Regular verification is supported by the included calibration certificate, and recorded measurements can be exported via USB or sent wirelessly to inspection software for archiving. The combination of clear digital readout, robust geometry and documented calibration improves decision making on the shop floor and supports a consistent quality culture across teams. Contact Metav Werkzeuge for tailored advice on the Microtech Metrology outside micrometer and request the ISO 17025 calibration certificate and data interface options from Metav Werkzeuge in Emmerich Technical Data Article number: 115053507 GTIN: 4061905040900 Manufacturer: Microtech Metrology eClass: 21170328 ETIM: EC003590 Key figures Measurement range: 300–350 mm Measuring depth: 110 mm Measuring faces diameter: Ø8 mm Accuracy: 0.008 mm Display resolution: 0.0001 mm Special features Digital with Wireless + USB data output ISO 17025 calibration certificate included Category: Micrometers Digital: yes FAQ Is the instrument delivered calibrated? Yes. The outside micrometer is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceability. How are measurements exported from the device? Measurements can be exported via the instrument's Wireless + USB interfaces for direct capture into inspection software or data logging systems. What measurement span does the micrometer cover and for which applications is it suitable? The micrometer covers a 300–350 mm range, making it suitable for medium‑format components such as fixtures, housings and larger machined parts. What level of precision can be expected for routine checks? Routine checks benefit from resolution 0.0001 mm and an accuracy ±0.008 mm, providing a balance of fine detail and dependable repeatability for workshop and production use. Which manufacturer produced this instrument and where can the calibration details be verified? The instrument is produced by Microtech Metrology; calibration details and the certificate are supplied with the product and reference the ISO 17025 process. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300–350mm Universal Bore Micrometer Wireless/USB, Exchangeable Anvils Not Included, 110mm Depth - Microtech Metrology
Benefit from a combination of high measurement precision, flexible data transfer and a medium‑range frame suited to larger workshop components; order the micrometer directly via Metav Werkzeuge or consult our specialists for integration advice. Universal frame micrometer — Microtech Metrology digital micrometer with Wireless and USB output Universal frame micrometer is a digital outside micrometer designed for medium‑range measurements in workshop and quality‑control environments, offering extended reach and modern data capture for traceable measurement workflows. Digital micrometer with microcomputer Wireless and USB data output Measuring range 300–350 mm, 110 mm depth Precision for medium‑sized workpieces that improves throughput The measuring range 300–350 mm places this instrument in the medium range, making it suitable for larger assemblies while remaining manageable for single‑operator use. With a display resolution 0.0001 mm and an operational accuracy ±0.008 mm, the instrument separates fine readout from overall measurement uncertainty: the display resolution indicates how finely results are shown, while the stated accuracy defines the expected deviation under normal working conditions. This combination supports reliable in‑process control and reduces rework by providing reproducible readings across components such as housings, fixtures and medium‑sized moulded parts. Modern data handling to integrate measurement into production control Equipped with an integrated microcomputer and both Wireless and USB data outputs, the device facilitates direct transfer of measured values into statistical process control or inspection software. Automated capture of readings eliminates manual transcription, decreases logging time and improves traceability in documentation. For production environments where data integrity and auditability matter, the micrometer’s connectivity supports faster decision making and smoother handover from workshop measurement to quality records. Practical design and accessory considerations for flexible use The frame offers an extended measuring depth 110 mm, enabling access to recessed features while maintaining stiffness across the span. The instrument accepts interchangeable measuring faces to adapt to specific workpiece geometries; note that anvils are not included, so selection of suitable contact faces is required for specialised tasks. The construction emphasises stable contact and repeatable clamping action, which together with the electronic readout reduces operator influence on results and supports consistent measurement across shifts. Where this instrument delivers measurable value In machine shops, toolrooms and production inspection, the micrometer is suited to dimensioning medium‑sized components such as shafts, housings and assembled fixtures. The mix of robust mechanical guidance, high readout resolution and digital output yields a practical balance between throughput and metrological control, helping to reduce scrap and speed acceptance testing. Integration into measurement routines also aids compliance with internal QA protocols and facilitates efficient data collection for continuous improvement. For expert advice on fitting this Microtech Metrology outside micrometer to existing inspection processes and to order via Metav Werkzeuge, contact Metav Werkzeuge in Emmerich for tailored support and seamless delivery. Technical data Article number: 115053577 Manufacturer: Microtech Metrology GTIN: 4061905457913 Facts Measuring range: 300–350 mm Measuring range (max): 350 mm Measuring range (min): 300 mm Measuring depth: 110 mm Accuracy: 0.008 mm Display resolution: 0.0001 mm Special features Digital display with integrated microcontroller Data output: Wireless and USB Interchangeable measuring faces possible; anvils not included Category: Micrometers / Outside micrometer ECLASS: 21170328 FAQ How accurate is the Universal frame micrometer? The Universal frame micrometer from Microtech Metrology (SKU 115053577) specifies an accuracy of ±0.008 mm, with a high‑precision display capable of 0.0001 mm readout for clear resolution of results. What measuring range does this instrument cover? This micrometer covers a measuring range of 300–350 mm and a measuring depth of 110 mm, classified as a medium‑range instrument suitable for larger workshop components. Can measurement data be exported directly to inspection software? Yes — the instrument provides both Wireless and USB data output and an integrated microcontroller to enable direct transfer of readings into SPC or inspection systems. Are the measuring anvils supplied with the micrometer? No, the device is supplied without anvils; it accepts interchangeable measuring faces so suitable contact tools can be selected for the intended application. What applications is this micrometer best suited for? Typical uses include dimensional checks on housings, fixtures, shafts and moulded parts in machine shops and quality control stations where medium‑range, traceable measurements and data integration are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300–400mm Digital Bore Micrometer With Carbide Measuring Faces, Large Range, Ratchet, Plastic Case - Metav IndustryLine
Take advantage of the combination of a 300–400 mm measuring range, carbide measuring faces and a clear digital readout for reliable, repeatable outside measurements in inspection and production. Order the instrument directly via Metav Werkzeuge or consult our technical team for tailored application advice. M302.026.C — Metav IndustryLine digital outside micrometer, 300–400 mm, carbide faces The M302.026.C is a workshop and inspection-grade digital outside micrometer designed for medium-range component measurement in toolrooms and production control. Carbide measuring faces for wear resistance Digital readout with ABS/INC and unit selection Ratchet spindle ensures constant measuring force Large 300–400 mm measuring range Confident medium-range measurement for repeatable results The instrument is built for the 300–400 mm band, which places it in the medium-range category for workshop metrology. That class balances reach and stiffness: it provides the necessary span for medium-sized fixtures, housings and large components while remaining manageable for single-person use at the workbench. The large range reduces the need to swap instruments during a run, improving throughput and lowering handling-related variation. Thanks to the robust construction and carbide measuring faces, the device maintains consistent contact geometry over extended service periods, supporting reproducible production tolerances. Precision mechanics and a readable digital interface Accuracy and reproducibility are engineered into the key components. A fine spindle pitch of 0.5 mm and a ratchet spindle mechanism deliver a uniform measuring force that limits operator-induced variation; the result is more consistent thickness and diameter readings. The digital display offers a high resolution of 0.001 mm and a stated accuracy of ±0.011 mm, making it suitable for quality control where reliable numerical data matter. Control keys for ON/OFF/SET, ABS/INC and UNIT simplify switching between incremental and absolute modes and between metric and imperial units, reducing measurement time and user errors. Ready for workshop use and digital data workflows The instrument is designed to integrate with modern data capture routines: a dedicated RB 4.1 data output provides a direct interface for external data collectors and inspection systems, enabling traceable measurement logging and batch reporting. For transport and protection, the micrometer is supplied in a protective case, ensuring safe storage between shifts and during transport. The matt chrome-plated measuring drum resists reflections and offers tactile control at the spindle, supporting rapid and safe measuring sequences under production conditions. Supplied to a factory standard (Werksnorm), the device is suited to daily inspection tasks where durability and dependable data transfer are priorities. For reliable medium-range measurement with Metav IndustryLine quality and integrated data output, contact Metav Werkzeuge in Emmerich for personalised technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M302.026.C GTIN: 4054469162997 eClass: 21170328 ETIM: EC003590 Manufacturer: Metav IndustryLine Facts Measuring range: 300–400 mm Measuring range (min): 300 mm Measuring range (max): 400 mm Resolution (display): 0.001 mm Accuracy: ±0.011 mm Spindle pitch: 0.5 mm Setting dimension: 325+375 mm Threads/spindles: 8 Special features Carbide (HM) measuring faces Digital display with ON/OFF/SET, ABS/INC and UNIT keys Ratchet spindle for consistent measuring force Data output: RB 4.1 Delivered in protective case for transport Material: matt chrome-plated measuring drum Factory standard: Werksnorm FAQ Is this micrometer suitable for measuring medium-sized components in a production environment? The M302.026.C from Metav IndustryLine is intended for medium-range outside measurement and is well suited to workshop and production inspection tasks where a 300–400 mm range is required. What resolution and accuracy does the instrument provide? The instrument offers a display resolution of 0.001 mm and a stated accuracy of ±0.011 mm, making it appropriate for quality-control checks that demand reliable numeric results. How does the device ensure consistent measuring force? A ratchet spindle mechanism provides a repeatable measuring torque, limiting operator variability and improving reproducibility of measurements with the M302.026.C. Can measurement data be exported for documentation? Yes. The instrument features an RB 4.1 data output for connection to external data collectors and inspection systems, enabling direct transfer of readings for documentation and analysis. Is the micrometer supplied ready for transport and storage, and does it include calibration documentation? The micrometer is delivered in a protective case for safe transport and storage and is supplied to factory standard (Werksnorm) with accompanying factory calibration documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30–40mm Digital Three-Point Internal Micrometer With Carbide Faces, RB6 Spindle, Digital Readout mm/inch - Metav IndustryLine
Take advantage of high metrological precision and robust shop-floor usability with this digital three-point internal micrometer: carbide measuring faces, 0.005 mm accuracy and RB 6 data output combine for reliable internal measurements and traceable data capture. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Digital Three‑Point Internal Micrometer M312.217 — digital, 30–40 mm range, RB 6 data output Metav IndustryLine Digital Three‑Point Internal Micrometer M312.217 is a precision instrument for internal diameter measurement in small bores and blind holes, designed for workshop and quality‑assurance use. Digital readout with mm/inch and HOLD Carbide measuring faces for wear resistance Measurement range 30–40 mm, high precision Suitable for blind‑hole measurements (RB 6 output) Faster, more reliable internal measurements through precise mechanics and clear data The three‑point design gives reproducible contact with cylindrical bores, converting a complex probing task into a single, repeatable measurement. The instrument combines a measurement range 30–40 mm with a resolution of 0.001 mm on the digital display and a verified accuracy of 0.005 mm, which reduces rework and speeds up inspection cycles. The carbide measuring faces resist wear in frequent use, keeping inspection uncertainty low over long production runs. For applications where blind‑hole measurement is required, the built‑in geometry and contact arrangement deliver stable readings even when access is limited. Built for shop‑floor integration and traceable data handling A robust, easy‑to‑read digital display with ON/OFF, SET, HOLD and mm/inch selection allows quick switching between tasks and units. The micrometer is equipped with RB 6 data output, enabling direct capture of measurement results into inspection software or data loggers for statistical process control and documentation. This rational approach to measurement — combining fast readout, compact mechanics and digital interfacing — supports production lines that require both speed and documented traceability, helping quality teams meet internal and customer requirements with less manual transcription. Practical durability and application benefits for everyday metrology The instrument is supplied without a setting ring or extension and is optimised for blind‑hole checks and small bore diameters typical in precision assemblies. The solid feel and balanced mass contribute to consistent operator technique, while the carbide measuring faces focus wear resistance where it matters most. Weighing 2.3 kg and finished for industrial use, the device suits bench‑top inspection and tighter‑tolerance checking in toolrooms and small batch production. By concentrating on core functions — robust contacts, precise electronics and straightforward data output — the micrometer helps maintain throughput without sacrificing measurement confidence. Contact Metav Werkzeuge to discuss integration options, request a technical datasheet or arrange procurement of the Metav IndustryLine M312.217 for precise internal measurements Technical Data Article number: M312.217 GTIN: 4054469169149 Category: Micrometers (three‑point internal) Manufacturer: Metav IndustryLine Facts Measurement range: 30–40 mm Resolution (display): 0.001 mm Accuracy: 0.005 mm Weight: 2.3 kg Tariff number: 90173000 Special features Carbide measuring faces (HM) Digital display with ON/OFF, SET, HOLD and mm/inch RB 6 data output Suitable for blind‑hole measurements Delivered without setting ring and without extension Label: Digital three‑point internal micrometer, 30–40 mm FAQ What level of accuracy can be expected from this three‑point internal micrometer? The instrument offers an accuracy of 0.005 mm and a display resolution of 0.001 mm, making it suitable for fine internal diameter control and repeatable quality checks. Can the micrometer measure blind holes? Yes, the design is specifically suited to blind‑hole measurements and is indicated for such applications, providing stable contact and reliable readings in restricted access bores. How are measurement results exported from the device? Results can be transferred via the RB 6 data output, allowing direct capture into compatible data acquisition systems or inspection software for traceability. Is the display convertible between units? The digital display supports both mm and inch via the mm/inch button, and includes HOLD and SET functions for convenient measurement routines. What materials are the measuring faces made from? The measuring faces are carbide, chosen for high wear resistance and long service life under frequent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30–40mm Three-Point Internal Digital Bore Gauge With Carbide Measuring Faces, IP65, Setting Ring, Supplied In Case - Metav IndustryLine
Benefit from high-precision, repeatable internal measurements thanks to the three-point contact system and an accuracy of ±0.005 mm, combined with IP65 protection and carbide measuring faces for long-term wear resistance; order directly via Metav Werkzeuge or speak with our consultants for tailored advice. Digital three-point internal micrometer M312.237.PN — 30–40 mm range, IP65, carbide faces (Metav IndustryLine) A Digital three-point internal measuring instrument M312.237.PN designed for reliable bore inspection and blind‑hole measurement in workshop and production environments. Digital display with mm/inch and HOLD IP65 protection for shop floor use Carbide measuring faces for wear resistance Range 30–40 mm, accuracy ±0.005 mm Precision where bore quality matters The three-point contact geometry provides stable centring in cylindrical bores, translating small radial deviations into reliable axial readings. With an indicated accuracy of ±0.005 mm and a resolution of 0.001 mm, the instrument is suitable for demanding inspection tasks where repeatability reduces rework. The design supports measurements in standard and blind bores, and conformity to DIN 863 makes it compatible with established workshop procedures. The three-point arrangement ensures consistent seating in the bore, improving repeatability over single-contact probes. Built for continuous use on the shop floor Durability is achieved through carbide measuring faces and an IP65 rating that keeps out dust and low-pressure water jets, allowing the device to be used close to machining centres without excessive protective measures. The solid construction and a mass of around 1 kg provide the stiffness needed for stable handling, while the wear-resistant contact tips extend service intervals. These attributes lower downtime and maintain measurement quality under real production conditions, so fewer measurements need repeating and throughput remains steady. Clear readings and practical data handling The digital display provides rapid readout switching between mm/inch, plus ON/PRESET and HOLD functions for timed readings. Data output via RB 6 enables direct transfer to inspection software or data loggers for traceable process control. Included accessories such as the setting ring (40 mm) and an extension (150 x Ø23.5) allow quick verification and measurement of deeper bores without additional tools. This combination of intuitive display, data connectivity and calibration aid speeds up inspection cycles and reduces operator error. Efficiency and confidence for quality teams Engineered for repeatable results, the instrument supports efficient quality routines in small-batch shops as well as larger production runs. The integrated features simplify documentation and traceability, making the tool a pragmatic choice where reproducible internal measurements are essential. Backed by Metav’s role as a precision partner, the device aligns with an approach that brings high‑quality metrology within reach of workshops and maintenance teams, supporting consistent output and fewer rejects. Speak to Metav Werkzeuge for tailored advice on the M312.237.PN — Metav’s specialists can confirm suitability for specific bore geometries and production routines; contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements. Technical data SKU: M312.237.PN GTIN: 4054469179131 Product type: Digital three-point internal micrometer Brand: Metav IndustryLine Facts Measuring range: 30–40 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Weight: 1 kg Protection class: IP65 Setting ring: 40 mm Extension: 150 x Ø23.5 Special features Carbide measuring faces Digital display with ON/PRESET, mm/inch, HOLD Data output: RB 6 Suitable for blind-hole bores Conforms to DIN 863 Includes setting ring and extension FAQ What measurement range does the instrument cover? The measuring range is 30–40 mm; the M312.237.PN is optimised for internal bores within that span. Is the device suitable for blind‑hole measurements? Yes, the three‑point contact system and included extension make the M312.237.PN suitable for blind‑hole (sackloch) bores. How is data exported from the instrument? The instrument provides a data output via RB 6, enabling connection to compatible data collection systems. What level of protection does the instrument offer in harsh environments? Rated IP65, the unit resists dust ingress and low‑pressure water jets, permitting use close to machining processes. Does the micrometer include calibration aids? The delivery includes a setting ring (40 mm) and an extension for quick verification and setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32-24 TPI Thread Insert Whitworth 55° Angle - Metav IndustryLine
Take advantage of the combination of precise Whitworth profiling, clear thread definition and compact handling for reliable thread verification; order the insert directly via Metav Werkzeuge or consult our specialists for selection advice. Thread gauge insert M309.098.3 — 32–24 TPI, 55° Whitworth profile (Metav IndustryLine) The Thread gauge insert M309.098.3 is a precision accessory designed to verify Whitworth 55° threads with a 32–24 TPI specification, intended for use in metrology benches and inspection fixtures Whitworth 55° profile compatibility 32–24 TPI thread specification Accessory for precision thread gauges Consistent verification for Whitworth 55° threads The insert provides a standardised contact geometry for Whitworth 55° forms, enabling repeatable checks of thread form and lead. Fitted into a gauge holder or test fixture, the component helps maintain inspection throughput by reducing setup variation and aligning with established thread standards. Where traceable documentation is required, the insert supports systematic verification workflows and aids quality assurance in production environments. Practical benefits for workshop and inspection processes Engineered as a compact inspection accessory, this insert minimises handling time during successive thread checks and integrates smoothly with existing gauge equipment. Its modest mass keeps fixture dynamics stable and simplifies change‑over between checks, which contributes to steady inspection cycles and fewer process interruptions. The defined 32–24 TPI geometry ensures unambiguous measurement reference when assessing Whitworth‑series fasteners and thread gauges. Part of a dependable metrology supply chain Specified for use as an accessory to measuring devices, the insert complements calibration and inspection routines by providing a known thread form for comparative checks. Sourced under the Metav IndustryLine umbrella, it benefits from a European quality filter and the logistical reliability associated with central supply from Emmerich. For buyers seeking consistent measurement performance across batches, this insert represents a small but decisive element in achieving reproducible results. Contact Metav Werkzeuge for ordering and guidance on integrating the Metav IndustryLine thread gauge insert into inspection setups; local stock and expertise are available from Metav Werkzeuge in Emmerich. Technical Data Article number: M309.098.3 GTIN: 4054469118345 Eclass: 21170324 Facts Thread specification: 32–24 TPI Thread angle: 55° Weight: 0.1 kg Tariff code: 90173000 Special features Whitworth 55° profile compatibility Intended as accessory for measuring equipment Category: Accessory (Zubehör) FAQ What thread form does this insert represent? The insert represents the Whitworth 55° thread form with a 32–24 TPI specification and is intended as a precision reference in inspection fixtures. Can the insert be used in standard gauge holders? Yes, the insert M309.098.3 is designed as an accessory for precision thread gauges and can be mounted in compatible gauge holders or test fixtures. Is traceability or certification supplied with the insert? The insert is supplied as a measuring accessory; for details on calibration or certification, please consult Metav Werkzeuge about calibration options and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
325-350mm Digital Three-Point Internal Micrometer For Blind Holes With Carbide Faces, 0.001mm Readout, Supplied In Case - Metav IndustryLine
Take advantage of a high‑precision, wear‑resistant measuring solution that combines a three‑point contact system, carbide measuring faces and a digital readout with data output for efficient quality control. Order the instrument directly via Metav Werkzeuge or ask the consultants for additional technical details or integration options. Digital three‑point internal micrometer M312.267.S – 325–350 mm range, blind‑hole carbide faces (Metav IndustryLine) The Digital three‑point internal micrometer M312.267.S is a specialised measuring instrument designed for repeatable internal diameter measurements of blind holes and bores in production and inspection environments. Digital display with mm/inch and HOLD function Carbide measuring faces for long wear resistance Three‑point blind‑hole contact system Measuring range 325–350 mm, depth 140 mm Precise blind‑hole measurement where concentric contact matters The three‑point measuring head delivers a stable, repeatable contact geometry that centres automatically within the bore, reducing alignment errors typical of two‑point gauges. This design is particularly effective for blind‑hole applications, where axial access is limited; the measuring head contacts the bore at three equidistant points to provide a reliable diameter value with minimal influence from slight angular misalignment. The instrument’s accuracy of 0.012 mm ensures measurements meet workshop and production control tolerances, making it suitable for medium‑format internal measurement tasks where reproducibility is essential. Digital readout and data connectivity for faster inspection cycles The clear digital display with ON/0-, mm/inch-, ABS-, PRESET- and HOLD functions simplifies operator workflows and reduces interpretation errors. A display resolution of 0.001 mm provides fine increments for careful adjustment, while the data output RB 4 allows direct transfer of results to statistical process control systems or data loggers, speeding up inspection rounds and documentation. Together, these features lower cycle times in quality assurance and support traceable measurement records that integrate into existing production IT environments. Durable construction for industrial use and reduced downtime Measuring faces made from carbide (hard metal) offer superior wear resistance compared with softer materials, extending service life in high‑use settings and maintaining measurement accuracy over time. The instrument is engineered for robust workshop handling and a measuring depth of 140 mm, so larger blind holes can be reached without compromising stability. Weight and construction support comfortable handling while maintaining stiffness for repeatable readings, translating into fewer remeasurements and consistent output quality. Practical integration into metrology workflows The unit arrives configured for immediate use in routine inspection tasks and is supplied without a setting ring, allowing integration into existing calibration routines or adaptation to company‑specific master gauges. Operators benefit from the combination of a stable three‑point contact system and a digital interface that reduces subjective reading errors and simplifies documentation. This makes the instrument a pragmatic choice for machine shops, toolrooms and inspection departments that require reliable internal measurement of components during incoming inspection and in‑process control. Contact Metav Werkzeuge in Emmerich to arrange a technical consultation, request detailed data or confirm compatibility with existing SPC systems for the M312.267.S three‑point internal micrometer Technical Data Article number: M312.267.S GTIN: 4054469159065 ECLASS: 21170335 ETIM: EC003590 Category: Micrometers Facts Measuring range: 325–350 mm Measuring depth: 140 mm Display resolution: 0.001 mm Accuracy: 0.012 mm Weight: 5 kg Data output: RB 4 Special features Three‑point internal measuring head for blind holes Carbide (HM) measuring faces Digital display with ON/0-, mm/inch-, ABS-, PRESET-, HOLD functions Supplied without setting ring Suitable for routine production and inspection workflows FAQ What measuring range does this micrometer cover? The M312.267.S covers a measuring range of 325–350 mm, designed for larger internal diameters and blind‑hole applications. Is the instrument suitable for blind‑hole measurement? Yes, the three‑point contact geometry of the M312.267.S is specifically designed to measure blind holes reliably and to centre automatically within the bore. What accuracy and resolution can be expected? The instrument provides an accuracy of 0.012 mm with a display resolution of 0.001 mm, suitable for production and laboratory inspection where fine resolution is required. Does the micrometer provide data output for SPC systems? The micrometer includes data output RB 4, enabling direct transfer of measurement data to compatible process control or logging equipment. Which accessories are delivered with the micrometer? Delivery is without a setting ring; other standard accessories are not listed in the product data and should be confirmed with Metav Werkzeuge if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
325-350mm Micrometer With 35mm Anvil Faces, Touchscreen Digital Display, USB/Wireless, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high reproducibility through accuracy ±0.009 mm, integrated Wireless + USB data output and full ISO 17025 calibration with certificate for traceable quality control; order the instrument via Metav Werkzeuge or consult the Metav team for integration advice. Micrometer — large-range 325–350 mm, 1.54" touchscreen (Microtech Metrology) A micrometer designed for medium-format components, offering precision readings, digital interfaces and calibration suited to laboratory and production environments Wireless and USB data output 1.54" touchscreen display Disc measuring faces Ø35 mm ISO 17025-calibrated with certificate Precision where larger ranges meet laboratory standards The instrument combines a substantial measuring range 325–350 mm with a finely tuned accuracy of ±0.009 mm, making it suitable for quality control of medium-format parts where repeatable tolerance checks are critical. The specified reading 0.0001 mm on the digital indicator supports fine-resolution inspection routines and helps reduce measurement uncertainty in serial checks. By delivering a documented calibration in accordance with ISO 17025, the tool ensures traceability for audits and simplifies conformity records for procurement and inspection processes. Streamlined data capture for efficient workflows Equipped with Wireless + USB outputs and a 1.54" touchscreen, the micrometer integrates easily into data-collection systems and inspection software. Wireless transfer reduces manual transcription errors and accelerates batch documentation, while USB connectivity provides a reliable wired option for direct logging. The intuitive touchscreen control minimises operator time per measurement and supports consistent recording of measurement series, which contributes directly to higher throughput and lower administrative overheads in the quality loop. Robust contact geometry for repeatable contact and surface protection Large disc measuring faces Ø35 mm provide stable contact on broader surfaces, improving alignment and averaging out local surface irregularities during measurement. The non-rotating spindle prevents unintended rotation of the workpiece against the anvil, protecting threaded or delicate surfaces and ensuring that each measurement is made under comparable contact conditions. This mechanical design, combined with the electronic readout, reduces operator-dependent variation and supports reproducible results across shifts and operators. Calibrated, documented and ready for integration Delivered with a full calibration certificate under ISO 17025, the micrometer meets the documentation needs of laboratories and ISO‑certified production facilities. The instrument’s digital interface and standardised data outputs simplify linking to existing inspection routines and SPC systems. Manufactured by Microtech Metrology, the device is suitable for traceable incoming inspection, in‑process checks and final verification tasks, offering a balance of range, usability and documented accuracy for medium-format measurement tasks. Contact Metav Werkzeuge today to discuss delivery, calibration documentation and system integration — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and procurement support Technical data Article number: 110783507 GTIN: 4061905457579 eClass: 21170328 ETIM: EC003590 Manufacturer: Microtech Metrology Facts Measuring range: 325–350 mm Measuring faces diameter: Ø35 mm Accuracy: ±0.009 mm Reading / resolution: 0.0001 mm Display: 1.54" touchscreen Data output: Wireless + USB Special features ISO 17025 calibration with certificate Non-rotating spindle for consistent contact Digital indicator (touchscreen) Disc measuring faces for broader contact area Suitable for lab and production metrology applications FAQ Is the micrometer delivered calibrated? Yes. The micrometer from Microtech Metrology is supplied fully calibrated according to ISO 17025 and includes the corresponding calibration certificate for traceability. What measuring range and accuracy does the micrometer offer? The micrometer covers a measuring range of 325–350 mm with an accuracy of ±0.009 mm and a reading resolution of 0.0001 mm. How can measurement data be transferred from the instrument? Measurement data can be transmitted via Wireless connection or exported through the USB interface for direct logging into inspection software. What contact faces does the instrument use and why does that matter? The device features disc measuring faces Ø35 mm; this larger contact area helps produce stable, repeatable readings on broader surfaces and reduces sensitivity to local surface defects. Who manufactures this instrument and how is it identified? The instrument is manufactured by Microtech Metrology and is listed under article number 110783507 (GTIN 4061905457579). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
325-350mm Precision Thread Measuring Micrometer With Touchscreen Readout, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 laboratory calibration combined with Wireless+USB data transfer and a non-rotating measuring spindle for repeatable thread measurement; order this precision instrument directly via Metav Werkzeuge or contact our consultants for tailored advice. Micrometer (Whitworth 55) — digital, 2.4" touchscreen, Wireless+USB (Microtech Metrology) Micrometer (Whitworth 55) — a digital micrometer designed for reliable measurement of Whitworth-threaded components across a medium-length range *ISO 17025 calibration certificate included *Colour 2.4" touchscreen display *Wireless and USB data output *Non-rotating measuring spindle Reliable precision for thread form control The digital micrometer delivers a combination of high reproducibility and traceable calibration that is essential where thread form and pitch must be checked consistently. Classified as a Medium range instrument (measuring range 325–350 mm) it bridges bench and workshop tasks, offering sufficient reach without compromising stiffness. The declared accuracy ±0.009 mm together with a fine resolution of 0.0001 mm supports quality control processes in production and inspection, reducing the risk of rejected assemblies due to incorrect thread profiles. Modern data workflow and ergonomic measurement Integrated Wireless+USB connectivity and the 2.4" touch display simplify data capture and logging for downstream SPC or inspection software. The measuring spindle is designed not to rotate during closure, which reduces the risk of thread damage and improves repeatability when gauging form-fit profiles. Digital readout and stable spindle control accelerate the measuring cycle while keeping handling straightforward; results can be exported directly for statistical analysis or archived with the supplied calibration documentation. Workshop-ready accessories and certified delivery Delivered with 10 x anvils 60-3.5 TPI (Whitworth 55), the instrument is equipped for immediate use on standard Whitworth threads. The package includes a full ISO 17025 calibration certificate, giving confidence that measurements are traceable and compliant with laboratory-grade requirements. Built by Microtech Metrology, this digital measuring instrument suits metrology labs and production shops that prioritise documented accuracy and efficient data transfer. Contact Metav Werkzeuge for a specification check, ISO 17025 certificate verification and to request a detailed technical datasheet — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 110723258 GTIN: 4061905456985 Manufacturer: Microtech Metrology Facts Measuring range: 325–350 mm Resolution (reading): 0.0001 mm Accuracy: 0.009 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Calibration: ISO 17025 certificate included Special features Non-rotating measuring spindle Includes 10 x anvils 60-3.5 TPI (Whitworth 55) Digital micrometer for thread measurement Suitable for medium-range dimensional control Manufacturer: Microtech Metrology FAQ What measuring range does the instrument cover? The micrometer covers a measuring range of 325–350 mm, placing it in the medium category for workshop and toolroom use. Is the device supplied calibrated? Yes — the micrometer is delivered with an ISO 17025 calibration certificate, confirming laboratory-traceable verification. How can measurement data be exported? Measurement results are transferable via Wireless+USB, enabling direct connection to inspection software or data-logging systems. Which thread standard is supported? The instrument is set up for Whitworth 55 threads and includes 10 x anvils 60-3.5 TPI (Whitworth 55) to match that standard. Does the spindle rotate during measurement? No — the measuring spindle is designed to remain non-rotating, which protects thread profiles and improves reproducibility. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
325-350mm Three-Point Inside Micrometer Digital With ON/Zero, mm/inch, ABS, Preset, Hold, Hardened Measuring Faces, Supplied In Case - Metav IndustryLine
Take advantage of precise medium‑range measurement, a clear digital readout and robust, transport‑ready construction for reproducible bore inspection and process control. Order this instrument directly via Metav Werkzeuge or consult our specialists for application advice and delivery options. Three‑point inside micrometer M312.267 — digital internal micrometer, 325–350 mm, Metav IndustryLine The Three‑point inside micrometer M312.267 is a digital instrument designed for accurate internal measurements in machine shops and quality inspection, ideal where medium‑range bore and ring accuracy is required. Digital display with mm/inch and ABS functions Measuring range 325–350 mm for medium assemblies Carbide measuring faces for wear resistance Supplied in a transport case Consistent medium‑range precision for production control This instrument covers the 325–350 mm interval and is classified in the medium range for internal measurement, making it well suited to fixture work, housing bores and rotary components where reach and stiffness must be balanced. The specified accuracy of ±0.012 mm supports reliable control tolerances during serial inspection and set‑up tasks. The spindle and three‑point measuring geometry provide repeatable contact with the bore, reducing operator‑induced variation and enabling faster decision cycles on the shop floor. As a consequence, throughput and first‑pass yield improve when this measuring principle replaces slower or less rigid methods. Clear digital handling and secure data transfer for traceability Equipped with a digital display featuring ON/0‑, mm/inch, ABS, PRESET and HOLD functions, the instrument offers immediate readback and basic data handling without added peripherals. For process integration the unit includes RB 4 data output, which permits connection to data collection devices or quality management systems and reduces transcription errors. Operators benefit from faster measurement routines and straightforward switching between metric and imperial units, while production engineers gain an auditable measurement stream that simplifies SPC sampling and corrective actions. Durable construction and transport protection for workshop use Built for daily shop use, the micrometer has carbide measuring faces that maintain form and surface finish under repetitive contact. A measuring depth of 140 mm and a stable mechanical frame with a weight of 5 kg deliver the stiffness required for reproducible readings across the full span. Delivery in a protective case ensures safe transport between inspection benches or job sites; note that the scope of delivery explicitly excludes a setting ring. This combination of wear‑resistant contacts and protected storage reduces downtime and maintenance efforts over the instrument’s service life. Practical fit for machine shops and inspection benches Metav IndustryLine positions this instrument as a workshop‑grade solution for routine internal measurement tasks where medium reach and dependable accuracy are required. The three‑point concept is particularly effective for measuring stepped bores and internal diameters with limited access. The instrument supports straightforward workflows in small series production as well as in maintenance and overhaul applications, contributing to consistent quality outputs from the inspection stage through to final assembly. For tailored advice on integrating the Metav IndustryLine M312.267 into existing inspection processes or to arrange delivery from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for an expert consultation and fast fulfilment. Technical data Article number: M312.267 GTIN: 4054469159041 Brand: Metav IndustryLine Data output: RB 4 Delivery: without setting ring Supplied in case Facts Measuring range: 325–350 mm Accuracy: ±0.012 mm Measuring depth: 140 mm Weight: 5 kg Digital display: ON/0-, mm/inch, ABS, PRESET, HOLD Tariff number: 90173000 Features Three‑point internal measuring geometry Carbide measuring faces Digital instrument with data output capability Transport case included Intended for medium‑range internal measurements FAQ What measuring range does the instrument cover? The instrument covers a 325–350 mm measuring range suitable for medium‑sized bores and components. What accuracy can be expected in routine use? The micrometer achieves an accuracy of ±0.012 mm, making it suitable for shop‑floor inspection and setup tasks requiring tight repeatability. Is the device protected for transport and storage? Yes, the instrument is supplied in a protective case, which helps prevent damage during storage and transit. Does the delivery include a setting ring? No, delivery is made without a setting ring; please order the appropriate reference ring separately if needed. Which data output is available for process integration? Data transfer is available via RB 4 output to support connection to data loggers or quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
325-350mm Three-Point Internal Measuring Instrument For Blind Holes, Carbide Measuring Faces, Pocket Depth 140mm, Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust three-point contact, carbide measuring faces and a ratchet stop for reproducible blind‑hole measurement across a medium range; order the instrument directly via Metav Werkzeuge or ask our consultants for application advice. Three-point internal gauge M312.157.S — Metav IndustryLine, 325–350 mm, carbide measuring faces The Three-point internal gauge M312.157.S is an analogue internal measuring instrument designed for precise blind‑hole inspection in medium‑range industrial applications, providing stable centring and wear‑resistant contacts for repetitive workshop use. Three-point contact for stable centring Carbide measuring faces for wear resistance Ratchet stop for repeatable measuring force 325–350 mm medium-range coverage Precise medium-range measuring for components and assemblies The M312.157.S offers three-point internal measurement tailored to medium‑range tasks, classified for the 300–500 mm band where reach and stiffness must be balanced. Its accuracy ±0.012 mm and analogue vernier control make it suitable for routine quality checks and assembly verification where repeatable centring and contact stability are essential. The three contact points ensure the measured diameter is centred automatically, reducing operator influence and shortening inspection time without sacrificing accuracy. Durable contact faces and consistent measuring force Equipped with carbide measuring faces, the instrument resists wear even in abrasive production environments, preserving measurement reliability over long service intervals. The integrated ratchet stop standardises the applied measuring force, which limits variability between operators and supports consistent quality control documentation. A matt‑chrome scale and vernier improves contrast for clear read‑offs on the analogue display, combining durability with practical workshop ergonomics. Application benefits and practical workshop integration Designed for blind‑hole (sackloch) measurement, the gauge features a measuring depth of 140 mm, enabling access to recessed bores and internal features in larger components. Its construction and weight (approx. 12 kg) reflect a stable instrument intended for bench use and fixture integration rather than handheld quick checks. Supplied without an adjustment ring, the tool is optimised for controlled inspection workflows; consult Metav Werkzeuge for recommended set‑up accessories and fixture strategies to integrate the gauge into existing inspection routines. For reliable medium‑range internal measurements choose the Metav IndustryLine M312.157.S and contact Metav Werkzeuge GmbH in Emmerich for a tailored consultation and procurement assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M312.157.S GTIN: 4054469158778 Category: Micrometers eClass: 21170335 ETIM: EC003590 Facts Measuring range: 325–350 mm Measuring depth: 140 mm Accuracy: 0.012 mm Weight: 12 kg Tariff number: 90173000 Special features Carbide measuring faces (HM) Scale and vernier matt chrome Analogue vernier readout Ratchet stop for consistent force Designed for blind‑hole measurement Delivery without setting ring FAQ How repeatable are measurements with this three‑point internal gauge? The M312.157.S achieves repeatable results through its three‑point contact design and ratchet stop; combined they reduce operator variance and support consistent readings within the specified ±0.012 mm accuracy. Can the gauge be used for through‑bores as well as blind holes? Yes, the internal measuring principle and three contact points are suitable for both blind and through bores, though this model is optimised for blind‑hole inspection as indicated by its design and measuring depth. What advantage do the carbide measuring faces provide? Carbide (HM) measuring faces on the M312.157.S increase wear resistance and maintain measurement integrity over extended use, which benefits serial inspection and abrasive environments. Is the instrument supplied calibrated or with certificates? The product data does not state an ISO 17025 calibration certificate; standard workshop calibration applies. For formal calibration services or certificates, Metav Werkzeuge can provide options and documentation. Are accessories included for adjustment or setting? Delivery is without a setting ring; recommended clamping or adjustment accessories should be selected according to the intended inspection workflow and can be discussed with Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
325-350mm Three-Point Internal Micrometer With Carbide Measuring Faces, 140mm Depth, 12kg Case Delivery - Metav IndustryLine
Take advantage of the combination of carbide measuring faces, a ratchet stop for consistent contact and the precise 325–350 mm measuring range to secure reproducible bore measurements; order the Three-point internal micrometer M312.157 directly via Metav Werkzeuge or ask our consultants if needed. Three-point internal micrometer M312.157 — 325–350 mm, carbide measuring faces (Metav IndustryLine) The Three-point internal micrometer M312.157 is a precision bore gauge designed for reliable internal diameter measurement in the 325–350 mm range, intended for workshop inspection and toolroom applications. Three-point measuring principle for stable centring Carbide measuring faces for abrasion resistance Ratchet stop for consistent measuring pressure 325–350 mm range for medium-sized bores Stable centring and repeatable results for medium bores The three-point measuring principle provides a centred contact with the bore, reducing runout and improving repeatability compared with single-contact probes. With carbide measuring faces only the contact surfaces wear, which extends service life under repeated use. The instrument is classified for the medium measuring range (300–500 mm), offering the best compromise between reach and handling for larger components such as housings, fixtures and medium-sized bores. Stated measuring accuracy is 0.012 mm while the analogue reading resolution is 0.005 mm, enabling dependable control measurements on the shop floor. Robust construction with operator-friendly handling A matt-chromed scale and vernier provide a corrosion-resistant reference that is easy to read under workshop lighting. The integrated ratchet stop ensures a consistent measuring force, which reduces operator-induced variation and supports meaningful comparison of repeated measurements. As an analogue instrument, the gauge requires no batteries and offers straightforward operation for experienced technicians and quality inspectors who favour tactile feedback and tried-and-tested mechanical systems. The solid build and carbide tips make it suitable for regular use in industrial environments. Practical scope of use and what's included Designed for internal diameter checks across a 325–350 mm span with a measuring depth of 140 mm, the instrument covers common inspection tasks in machining, assembly and maintenance. The delivery excludes an adjustment (setting) ring, so calibration or comparison against a ring gauge should be arranged if traceable reference checks are required. The three-point concept and robust contact faces make this gauge particularly suitable for repetitive checks where centring and wear resistance are priorities. Contact Metav Werkzeuge to discuss technical details or to arrange purchase of the M312.157 three-point internal micrometer and ensure it fits the required inspection routine Technical data SKU: M312.157 GTIN: 4054469119649 Harmonized tariff number: 90173000 Core technical data Measuring range: 325–350 mm Measuring depth: 140 mm Reading resolution: 0.005 mm Accuracy: 0.012 mm Special features Three-point internal measuring principle Carbide measuring faces Matt-chromed scale and vernier Ratchet stop Delivery without setting ring Analogue instrument FAQ What measurement range does this gauge cover? The three-point internal micrometer M312.157 covers internal diameters from 325 to 350 mm, making it suitable for medium-sized bores. What accuracy and resolution can be expected? The instrument is specified with an accuracy of 0.012 mm and an analogue reading resolution of 0.005 mm for repeatable workshop checks. Are the contact faces durable for industrial use? Yes, the M312.157 is fitted with carbide measuring faces that provide high abrasion resistance and longevity under repeated contact. Is any calibration or setting accessory included? Delivery is made without a setting ring; a calibration or setting ring should be used separately for traceable reference checks when required. How does the ratchet stop help in measurement? The ratchet stop provides a consistent measuring force, minimising variation between measurements and improving reproducibility of results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
325mm Setting Gauge For Micrometer With Thermal Shield, Ball Tips, Accuracy ±0.004mm - Metav IndustryLine
Benefit from a 325 mm nominal length combined with thermal protection and a ±0.004 mm accuracy for reproducible micrometer settings; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Micrometer Setting Gauge M304.320.2 – Setting standard for external micrometers, 325 mm, ±0.004 mm (Metav IndustryLine) A Micrometer Setting Gauge M304.320.2 designed as a workshop reference for precise calibration and setting of external micrometer heads in production and quality-control environments. Accuracy ±0.004 mm Nominal length 325 mm (medium range) Thermal protection for stable readings Spherical measuring faces for repeatable contact Consistent reference for medium-range micrometer work A purpose-built setting standard supplies a reliable reference when calibrating or setting external micrometer heads. The M304.320.2 offers a nominal length of 325 mm, placing it in the medium range (300–500 mm) that balances reach and stiffness for larger assemblies. With a measured accuracy of ±0.004 mm, the gauge reduces uncertainty during setup and supports repeatable readings across a production run. The construction prioritises dimensional stability so that the reference value remains a stable baseline for tool adjustment and process checks. Stable measurements through temperature control and contact geometry Temperature fluctuations are a common source of measurement drift; this setting standard includes thermal protection, which mitigates rapid heat transfer and helps maintain consistent dimensions during use. Combined with spherical measuring faces, the contact geometry promotes constant point contact under the micrometer anvils, lowering the influence of slight misalignment or surface irregularities. These design details translate into clearer pass/fail decisions at the workshop bench and fewer rework cycles — a tangible efficiency gain in everyday metrology tasks. Practical workshop integration and traceable documentation The gauge’s compact mass and clear nominal dimension make it simple to incorporate into a calibration routine or a setting station. The device is categorised as an accessory suitable for micrometer adjustment and is supplied with identifiable markings (SKU M304.320.2 and GTIN 4054469116716) to support inventory and traceability. Lightweight handling reduces operator fatigue while the dimensional specification (including a contact diameter of 16 mm) is suitable for standard external micrometer anvils. For organisations that require documented references, this setting standard serves as a stable in‑house baseline, aiding consistent quality control across shifts and machines. For precise micrometer setups with the Metav IndustryLine setting gauge, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply directly from our European hub. Technical data Article number: M304.320.2 GTIN: 4054469116716 Tariff number: 90173000 Core specifications Nominal length: 325 mm Accuracy: ±0.004 mm Diameter (contact): 16 mm Weight: 0.6 kg Special features Thermal protection Spherical measuring faces Intended for micrometer setting Category: Accessory FAQ What is the nominal size and intended use of the gauge? The setting standard has a nominal length of 325 mm and is intended as a reference for adjusting and checking external micrometer heads in workshop and quality-control settings. How accurate is the reference and what does that mean for daily use? The gauge delivers an accuracy of ±0.004 mm, which supports repeatable micrometer settings and reduces measurement uncertainty during routine adjustments with the M304.320.2. Are the measuring faces suitable for standard micrometer anvils? Yes, the device has spherical measuring faces optimised for consistent contact with external micrometer anvils and a contact diameter of 16 mm for stable engagement. Can the setting gauge be used for larger assemblies? Classified as medium range, the 325 mm length bridges the gap between compact references and long‑reach standards, making it suitable for larger fixtures and assemblies where increased reach is required without sacrificing stiffness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33mm Digital Micrometer With Carbide Tip 0.001mm Resolution, Friction Thimble, Case - Metav IndustryLine
Take advantage of high-resolution 0.001 mm measurement, a carbide measuring tip for long-term wear resistance and a friction ratchet that ensures reproducible contact force for consistent results — order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Digital Micrometer M302.216 — digital outside micrometer with 0.001 mm resolution and carbide tip (Metav IndustryLine) The Digital Micrometer M302.216 is a compact, high-precision outside micrometer designed for fine mechanical measurement tasks within a 7.6–33 mm range. High-resolution 0.001 mm display Carbide measuring tip for durability Friction ratchet for repeatable measuring force Includes setting gauge and protective case Precision where every micrometre counts The instrument delivers a resolution of 0.001 mm and an operational accuracy of ±0.005 mm, making it suitable for quality checks where sub‑hundredth‑millimetre reproducibility is required. The carbide measuring tip (Ø 6.5 mm, 60°) combines hardness with stable contact geometry to reduce wear and preserve measurement integrity over time. The spindle advances at 2 mm per revolution, which, together with the fine digital readout, allows controlled approach speeds and precise positioning. These technical elements translate into reliable measured values and fewer rejects on the shop floor. Built for repeatable, user‑friendly measurement Ergonomics and process reliability are addressed by the friction ratchet, which standardises the applied contact force and reduces operator influence on results. The digital display features ON/OFF/SET and ABS/INC/UNIT controls for quick toggling between absolute and incremental modes and a simple unit change. Data transfer is available via RB 4.1 output, permitting integration with data loggers or inspection software for traceable records. A setting gauge is supplied, enabling fast zero checks and routine verifications without additional tooling. Robust construction and delivery-ready presentation The frame is lacquered for corrosion protection and handling comfort, while the measuring faces are made of hard carbide to withstand repeated use. The instrument is delivered in a protective case, ensuring safe transport and storage, and includes the necessary adjustment standard. At a weight of approximately 1.5 kg, the device balances stability with manageable handling during measurement sequences. These attributes support a maintenance‑low work routine and a long service life in precision workshop environments. Contact Metav Werkzeuge today for tailored advice on integrating the M302.216 into your quality workflow — call +49 2822 7131930 or email info@metav-werkzeuge.com to request procurement or technical clarification Technical Data Article number: M302.216 GTIN: 4054469151908 Description: Digital micrometer with carbide measuring tip, 7.6–33 mm range Data output: RB 4.1 Core Measurements Measuring range: 7.6 mm – 33 mm Resolution (display): 0.001 mm Stated accuracy: ±0.005 mm Spindle pitch: 2 mm per revolution Measuring tip diameter/angle: Ø 6.5 mm × 60° Weight: 1.5 kg Features & Materials Carbide measuring faces Lacquered frame Friction ratchet Digital display with ON/OFF/SET and ABS/INC/UNIT Setting gauge included Protective case included FAQ What resolution and accuracy can be expected from this instrument? The M302.216 offers a resolution of 0.001 mm and a stated accuracy of ±0.005 mm, providing reliable sub‑hundredth‑millimetre performance for precision checks. Are the measuring faces suitable for heavy‑duty shop use? Yes — the measuring faces on the M302.216 are made of carbide, which improves wear resistance and maintains measuring geometry under regular use. Is a calibration or adjustment standard supplied with the micrometer? A setting gauge is included with the M302.216 for immediate zero checks and simple routine adjustments. How can measurement data be exported from the device? The micrometer supports data transfer via the RB 4.1 interface, allowing connection to compatible data collectors or inspection systems for documented results. Does the instrument help to reduce operator‑related variation? The integrated friction ratchet standardises contact force, reducing operator influence and increasing repeatability across users when using the M302.216. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35-40mm Three-Point Internal Micrometer Self-Centring, 0.005mm Resolution, Supplied in Case - Metav IndustryLine
Take advantage of the combination of self‑centring three‑point contact, 0.005 mm accuracy and a compact 35–40 mm micro range for reproducible bore checks and tight assembly control. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Three‑point internal micrometer M836.712 — self‑centring analogue gauge (35–40 mm) The three‑point internal micrometer M836.712 is an analogue, self‑centring instrument designed for precise internal diameter measurement in fine mechanical and toolmaking environments. Self‑centring three‑point contact High precision: 0.005 mm accuracy Analogue readout with defined measuring faces Precision where small dimensions decide The instrument delivers a measured accuracy of 0.005 mm, making it suitable for demanding inspection tasks where component interchangeability matters. The analogue mechanical mechanism provides tactile feedback during measurement, which helps experienced operators judge correct seating and contact. This combination of fine resolution and mechanical feel supports consistent quality checks on small bores without relying on electronic systems. Stable centring for repeatable bore readings The three‑point contact geometry is self‑centring, so the contact points automatically align with the internal axis of the bore. That geometry reduces eccentricity errors and improves repeatability, particularly in cylindrical housings and precision fittings. For processes that require repeated measurements across a batch, the self‑centring action minimises operator influence and shortens inspection time per part. Compact micro range with clear measuring faces Designed for the 35–40 mm span, this instrument falls within the micro range, which is ideal for fine mechanical assemblies and small tooling components. The device includes defined measuring faces that ensure secure contact and reliable readings even in shallow bores. The compact design balances reach and stiffness, enabling stable two‑hand or bench measurements while maintaining ease of handling in workshop environments. Integration into workshop routines and supply confidence As a Metav IndustryLine product, the gauge fits into a supply chain geared to workshops and small series manufacturers: robust mechanical design, straightforward handling and compatibility with traditional inspection workflows. The instrument supports standard measuring procedures and can be paired with existing inspection jigs or borescope checks to form a dependable quality control step without introducing complex electronics. For reliable micro‑bore measurement choose the Metav IndustryLine three‑point internal micrometer M836.712 — contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M836.712 GTIN: 4061905041501 eClass: 21170335 ETIM: EC003590 Brand: Metav IndustryLine Facts Measuring range: 35–40 mm Measuring range (max): 40 mm Measuring range (min): 35 mm Accuracy / resolution: 0.005 mm Display type: analogue (mechanical) Special features Self‑centring three‑point contact Defined measuring faces present Analogue mechanical gauge Category: internal micrometer (micrometer gauge) FAQ How accurate is the instrument in practical use? The three‑point internal micrometer M836.712 provides an indicated accuracy/resolution of 0.005 mm, which supports tight tolerance checks in precision assemblies. What measuring range does the gauge cover and how is it classified? The gauge covers 35–40 mm, placing it in the micro range for compact internal measurements ideal for fine mechanical and toolmaking applications. Is the contact geometry suitable for concentric bore measurement? Yes — the self‑centring three‑point contact ensures the measuring points align with the bore axis, improving concentricity and repeatability for internal diameter checks. Does the instrument use an electronic display or is it purely mechanical? The device is an analogue mechanical micrometer; readings are taken by tactile adjustment and mechanical indication rather than an electronic display. Is a calibration certificate supplied with the product? No specific calibration certificate is listed in the product data; the product information does not state delivery with a calibration document. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35-50mm Three-Point Outside Micrometer 0.01mm Readout Carbide Measuring Faces Ratchet In Case - Metav IndustryLine
Reliable three‑point measurement, carbide measuring faces and a ratchet stop combine to deliver repeatable results for polygonal components; order the M309.023 directly via Metav Werkzeuge or consult our specialists for application advice. M309.023 — Three‑point outside micrometer, 35–50 mm, carbide faces (Metav IndustryLine) The M309.023 is a three‑point outside micrometer designed for precise measurement of triangular and multi‑sided workpieces in machine shops and inspection benches. Three-point measuring for polygonal parts Carbide measuring faces for long service life 35–50 mm measuring range Ratchet stop for consistent measuring force Consistent results for polygonal components The three‑point measuring principle delivers a secure contact on three, and by extension five, flat surfaces, reducing the influence of edge irregularities and enabling repeatable results on polygonal parts. The instrument’s carbide measuring faces resist wear and retain form under repeated use, which helps maintain measurement traceability across production batches. A calibrated ratchet stop ensures a defined measuring force, preventing over‑tightening and keeping operator‑induced variation to a minimum. Precision and reading clarity for workshop use This analogue micrometer provides a fine reading of 0.01 mm combined with a verified accuracy of 0.006 mm, making it suitable for routine dimensional checks where sub‑hundredth‑millimetre resolution is required. The matt‑chromed measuring drum improves legibility under workshop lighting while the painted frame reduces glare. Together, these features contribute to faster, more reliable inspection cycles and a reduced rate of rework. Built for the shop floor with practical delivery Constructed with a robust frame and finished measuring surfaces, the device includes a ratchet for uniform contact pressure and is delivered in a transport case to protect the instrument during storage and transit. The tool is intended for measuring triangular and pentagonal workpieces and comes with a setting gauge (setting size: 335 mm) for quick verification and adjustment. The compact 35–50 mm range is particularly well suited to fine mechanical tasks and precision workshop applications where space and stiffness are decisive. For reliable three‑point measurements in production or inspection, choose the Metav IndustryLine M309.023 — contact Metav Werkzeuge in Emmerich for technical guidance and local supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M309.023 GTIN: 4054469117584 eClass: 21170328 ETIM: EC003590 Facts Measuring range: 35–50 mm Reading: 0.01 mm Accuracy: 0.006 mm Analogue instrument Setting gauge: 335 mm Special features Carbide measuring faces Ratchet stop for consistent measuring force Frame painted; measuring drum matt chrome Delivered in transport case for transport protection Suitable for triangular and five‑sided workpieces FAQ What range does this micrometer cover? The instrument covers a measuring range of 35–50 mm, making it suitable for small to medium workshop measurements. Is the measuring face material wear‑resistant? Yes — the M309.023 is supplied with carbide measuring faces, which offer high wear resistance and sustained dimensional stability. How fine is the scale and what accuracy can be expected? The analogue drum provides a reading of 0.01 mm with an indicated accuracy of 0.006 mm, appropriate for precise routine checks. Does the micrometer include features to prevent over‑tightening? A ratchet stop is integrated to ensure a repeatable measuring force and to reduce operator influence on the measurement result. Is a protective case supplied? The micrometer is delivered in a transport case to protect the instrument during shipment and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
350-400mm Universal Micrometer Caliper With Interchangeable Anvils, Digital Output Wireless/USB — Microtech Metrology
This digital outside micrometer combines reliable Wireless+USB data transfer with a high nominal accuracy of 0.009 mm and a wide measuring span, enabling reproducible measurements of large external diameters; order supply or request advice via Metav Werkzeuge for fast integration into existing quality workflows. Universal outside micrometer — digital, Wireless+USB, Microtech Metrology The Universal outside micrometer is a digital measuring instrument intended for large-format external measurements in fixture, mould and component inspection, supplied without anvils and equipped for electronic data export. Digital display with 0.009 mm accuracy Wireless and USB data output Measuring range 350–400 mm Measuring depth 110 mm Precise data capture for process-reliable production The instrument delivers a clear digital readout and electronic transfer capability, which reduces transcription errors and supports statistical process control integration. With a specified accuracy of 0.009 mm and a fine reading increment indicated in the data, the micrometer is suited to repeatable checks of large external features where traceability and documented measurement logs matter. The Wireless+USB connectivity enables straightforward linking to collection systems and inspection software, making the device a practical tool for modern quality routines. Robust range and application-oriented design Designed for measurements within the 350–400 mm span, this micrometer falls into the medium large-format category used in fixture fabrication and mouldwork. The measuring depth 110 mm offers access to recessed surfaces and stepped diameters while maintaining a stable measuring posture. Note that anvils are not included with delivery; this allows individual selection of application-specific anvils or extensions to suit different contact geometries and surface types. The universal frame concept supports heavy-duty use while keeping the measuring faces accessible for diverse component shapes. Workflow integration and operator benefits Electronic data output via Wireless+USB supports real-time entry into inspection protocols, shortening the feedback loop between shop floor measurement and process adjustment. The digital display and consistent measuring mechanism reduce the influence of operator variation and improve reproducibility across shifts. As a branded solution from Microtech, the device is positioned for use in quality laboratories and production support where documented measurement exchange and auditability are required; the combination of digital transfer and nominal accuracy makes the instrument an effective link between manual gauging and automated reporting. Contact Metav Werkzeuge for technical advice on the Microtech digital outside micrometer and to arrange supply from Emmerich. Technical data Article number: 115054077 GTIN: 4061905457920 ECLASS: 21170328 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 350–400 mm Measuring depth: 110 mm Accuracy: 0.009 mm Reading: 0.0001 Digital: yes Special features / Design Data output: Wireless+USB Digital readout Anvils not included Category: Outside micrometer / large-format FAQ Is the micrometer suitable for inspection of large external diameters? The Universal outside micrometer by Microtech Metrology, with a measuring range of 350–400 mm and a measuring depth of 110 mm, is intended for external diameter inspection of larger components and fixtures. How is measurement data transferred from the instrument? Measurement values are exported via the device's Wireless+USB interfaces, enabling direct capture into inspection software or data logging systems. Are anvils supplied with the micrometer? The product is delivered without anvils; the package excludes anvils to allow selection of the appropriate contact faces for specific applications. What level of accuracy can be expected in routine checks? The instrument is specified with an accuracy of 0.009 mm, making it suitable for repeatable production checks where that tolerance meets the inspection criteria. Can the instrument be integrated into an SPC workflow? Yes — the Wireless+USB data output supports integration into statistical process control and quality documentation systems for automated logging. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
350mm Gauge Block Set Metric 60 Calibration Included - Microtech Metrology
Take advantage of the 350 mm reference length and Metric 60 compatibility to standardise thread and gauge setups while reducing adjustment time; the durable metrology accessory supports consistent results across repeated operations. Order the setting gauge directly via Metav Werkzeuge or request advice from our consultants if specification guidance is required. Setting gauge — 350 mm reference, Metric 60, Microtech Metrology The setting gauge provides a precise reference length for metric 60 measurements and is intended as a workshop and laboratory accessory for reproducible gauge setup and calibration. 350 mm reference length Metric 60 compatibility Precision accessory for metrology Faster, reproducible setups for thread and gauge work This reference tool acts as a fixed 350 mm standard that reduces variability during setup and calibration. By using a consistent reference, set-up routines become quantifiable and repeatable, which shortens machine downtime and minimises adjustment cycles. The Metric 60 designation denotes compatibility with metric-60 thread systems and related calibration procedures, enabling straightforward integration into existing quality workflows. The result is measurable efficiency: fewer rechecks and more predictable production starts. Confidence through measurable accuracy and workflow integration As a dedicated metrology accessory, the unit supports traceable procedures when used alongside calipers, micrometres and test fixtures. The accessory is devised to serve as a stable reference during adjustment and inspection tasks, helping to align measuring devices quickly and consistently. This practical function translates into lower scrap rates and clearer pass/fail decisions on the shop floor, reinforcing decision-making with objective measurement points rather than estimation. Simple implementation, clear documentation value The compact, single-purpose nature of the item keeps handling straightforward and training minimal. Incorporating this reference into standard operating procedures enables technicians to document setup steps and record repeatable outcomes. Where traceability is required, the accessory’s fixed length and metric designation make it simple to reference in quality records and inspection reports, supporting audits and internal quality assurance without complicating processes. Request a technical consultation from Metav Werkzeuge to confirm suitability of the Microtech Metrology setting gauge with 350 mm Metric 60 reference and to discuss integration into existing calibration routines Technical data Article number: 110710035 GTIN: 4061905459252 Brand: Microtech Metrology Dimensions & core data Length: 350 mm Metric size: 60 Special features Category: Metrology accessories Type: Setting gauge Intended use: Reference for calibration and setup FAQ What is the primary use of this setting gauge? The setting gauge from Microtech Metrology is intended as a fixed-length reference for setting and checking instruments, providing a reliable 350 mm benchmark for Metric 60 applications. Can this gauge be used with standard calipers and gauges? Yes, the accessory is designed to integrate with conventional measuring instruments and fixtures, serving as a repeatable reference point during calibration and adjustment workflows. Does the product support traceability in quality documentation? Using the 350 mm reference and its Metric 60 designation, the setting gauge can be cited in inspection records and SOPs to demonstrate consistent setup and measurement procedures. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com