Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
100-125mm Digital Micrometer With Non-Rotating Spindle 0.001mm Resolution, Supplied With 7 Interchangeable Inserts In Case - Metav IndustryLine
Take advantage of precise 0.001 mm resolution, a non-rotating spindle and a ratchet thimble to secure reproducible contact force for daily workshop inspection tasks; order the micrometer via Metav Werkzeuge or contact our consultants for technical advice. Digital Uni-Micrometer with 7 interchangeable inserts — precision micrometer, 100–125 mm range, 0.001 mm resolution (Metav IndustryLine) Digital Uni-Micrometer with 7 interchangeable inserts offers high-resolution measuring for workshop and quality-control applications, combining a stable frame, a matt-chromed measuring spindle and a clear digital display Digital readout with 0.001 mm resolution Non-rotating spindle for consistent measurements Ratchet thimble ensures reproducible contact force Supplied with seven pairs of special inserts High-resolution readings that speed up quality control The instrument provides a digital readout with a fine resolution of 0.001 mm, enabling decisive measurements where tighter tolerances matter. The specified accuracy of 0.012 mm supports routine inspection and in-process checks in production environments, shortening decision loops and reducing rework. The integrated RB 4.1 data output simplifies logging and traceability by allowing measured values to be transferred to documentation systems, eliminating manual transcription errors. A matt-chromed measuring spindle and a painted frame ensure stable contact geometry and reduce thermal effects during repeated cycles, which keeps results consistent across shifts. Consistent contact and adaptability for diverse parts A non-rotating spindle and a ratchet thimble work together to deliver repeatable measuring force and minimise angular errors on turned or delicate surfaces. The unit is supplied with seven pairs of special measuring inserts, extending the micrometer’s applicability to stepped, cylindrical and other challenging surfaces without improvised adaptations. At 6.5 mm spindle diameter the contact is rigid enough for everyday workshop use while the ergonomic thimble and ratchet support single‑hand operation during series checks, improving throughput without sacrificing accuracy. Built for data workflows and daily handling The digital interface includes ON/OFF, ABS/INC, UNIT and SET functions for flexible operation and quick toggling between absolute and incremental modes. With a robust, factory-built design weighing 1.1 kg, the device tolerates routine handling and remains stable during bench measurements. Delivery includes a protective transport case and seven pairs of inserts, allowing secure storage and immediate deployment on the shop floor. The instrument is manufactured to a factory standard (Werksnorm) and is ready for integration into measurement routines where consistent documentation and data output are required. For workshop-grade precision and seamless data transfer, contact Metav Werkzeuge to discuss suitability for specific inspection tasks or to place an order: phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M302.044.D GTIN: 4054469114231 Brand: Metav IndustryLine Norm: Werksnorm Facts Measuring range: 100–125 mm Resolution: 0.001 mm Accuracy: 0.012 mm Measuring spindle diameter: 6.5 mm Weight: 1.1 kg Special features Painted frame Matt-chromed measuring spindle Non-rotating spindle Ratchet thimble Digital display with ON/OFF, ABS/INC, UNIT, SET Data output RB 4.1 Supplied with seven pairs of special measuring inserts Delivered in a protective transport case FAQ What level of accuracy can be expected from this micrometer? The micrometer offers a resolution of 0.001 mm and an accuracy of 0.012 mm, suitable for workshop quality control and routine inspection tasks using the Digital Uni-Micrometer from Metav IndustryLine (SKU M302.044.D). Can measurement data be exported for documentation? Yes, the instrument is equipped with RB 4.1 data output for integration with data acquisition systems and documentation workflows. Which accessories are included with delivery? Delivery includes seven pairs of special measuring inserts and a protective transport case, allowing immediate use and safe storage of the micrometer. Is the spindle designed to reduce measurement error from rotation? The micrometer features a non-rotating spindle, which reduces angular and surface-induced errors and improves reproducibility on cylindrical and small parts. What operating functions does the digital display provide? The digital display offers ON/OFF, ABS/INC, UNIT and SET functions for quick switching between display modes and straightforward incremental measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Digital Uni Micrometer 0.001mm Resolution, Movable Anvil, 7 Pair Inserts, Plastic Case - Metav IndustryLine
Take advantage of the combination of industrial-grade accuracy, robust mechanics and straightforward data transfer for reliable process control; the built-in digital readout with 0.001 mm resolution and the sliding anvil ensure repeatable measurements across a broad range. Order the micrometer directly via Metav Werkzeuge or contact the consultants for application advice. Digital Universal Micrometer M302.144.D — 100–125 mm, 0.001 mm resolution (Metav IndustryLine) The Digital Universal Micrometer M302.144.D is an industrial micrometer designed for precise workshop and quality‑control measurements within the 100–125 mm range, featuring a sliding anvil and digital output for seamless data capture 0.001 mm resolution for high precision Supplied with seven pairs of measuring inserts Sliding anvil for adaptable measuring positions Ratchet stop for constant measuring force Digital output RB 4.1 for data transfer Precision that reduces rework and speeds inspection A resolution of 0.001 mm delivers sub‑micrometre clarity where component tolerances are tight; this level of detail reduces the need for repeated checks and lowers scrap rates. Classified as a standard‑range instrument, the device covers the common shopbench span between 100 and 125 mm and thus balances reach with stiffness—a practical compromise for general machine‑shop measurement tasks. The integrated display with digital functions simplifies reading and switching between units, improving throughput in inspection routines while keeping the learning curve short for technicians. Durable design for reproducible shop measurements Mechanical reliability is central to repeatability: the micrometer features a ratchet stop to standardise the applied measuring force and a sliding anvil that extends reach without compromising alignment. The measuring spindle (6.5 mm) and matt chrome finish on the measuring drum provide robust contact surfaces that resist wear in daily use. Supplied with seven pairs of measuring inserts, the set covers diverse contact geometries and is delivered in a protective case for transport and safe storage, ensuring the instrument arrives ready for service in routine production environments. Connectivity and workflow integration for traceability Built for modern production, the instrument includes RB 4.1 data output to feed measurement values directly into a data‑collection system or quality database, eliminating transcription errors and supporting traceability. The display offers ON/OFF, ABS/INC, UNIT and SET controls for straightforward operation and quick zeroing. Supplied under factory standard, the device is intended for metrology tasks within a production setting where reliable electronic recording and uncomplicated integration into inspection workflows are priorities. Contact Metav Werkzeuge today to discuss how the M302.144.D fits into existing quality processes or to request tailored advice directly from our specialists at Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M302.144.D GTIN: 4054469114941 Brand: Metav IndustryLine Label: Digital-Uni.-Mikrometer, 100 -125 mm, 7 Paar Einsätze Ablesung 0,001 mm, mit verschiebbarem Amboss Facts Measuring range: 100–125 mm Resolution: 0.001 mm Weight: 1.6 kg Measuring spindle: 6.5 mm Data output: RB 4.1 Digital display: ON/OFF, ABS/INC, UNIT and SET Special features Supplied with seven pairs of measuring inserts Sliding anvil for extended measuring positions Ratchet stop for reproducible measuring force Measuring drum matt chrome‑plated Delivered in protective case for transport Norm: factory standard (Werksnorm) FAQ What measuring range does this micrometer cover? The micrometer covers the 100–125 mm measuring range, which is classified as a standard‑range instrument suitable for general machine‑shop and quality‑control tasks. Can measurement data be exported to a computer system? Yes, the device provides an RB 4.1 data output for direct transfer of readings into external data‑collection or quality management systems. Is the instrument supplied with measuring contacts for different tasks? The micrometer is supplied with seven pairs of measuring inserts to accommodate various contact geometries and measurement applications. How does the micrometer ensure consistent measuring force? Consistency is achieved via the built‑in ratchet stop, which standardises the applied force and helps maintain repeatable readings across operators. What digital functions are available on the display? The display includes ON/OFF, ABS/INC, UNIT and SET functions for unit selection, zeroing and simple operation during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Groove Measuring Micrometer 0.01mm Resolution Friction Ratchet, Supplied in Case - Metav IndustryLine
Take advantage of the 100–125 mm measuring range and the proven mechanical design to ensure repeatable groove checks with minimal setup time; order directly via Metav Werkzeuge or consult the experts for application advice. Bügelmicrometer M307.025 — Groove micrometer, 100–125 mm range, 0.01 mm reading (Metav IndustryLine) The Bügelmicrometer M307.025 is an analogue frame instrument designed for precise measurement of grooves and slots in workshop and production settings, offering a balance of reach and rigidity suitable for standard machine‑shop tasks. Groove measurement 100–125 mm 0.01 mm scale reading Repeatability ±0.008 mm Ratchet stop and fixed spindle Reliable standard-range measurement for everyday workshop use This groove micrometer is built for the standard range (100–300 mm) of workshop inspection, here delivered as a 100–125 mm instrument that balances reach with structural stiffness. That compromise reduces deflection compared with longer instruments while still covering common slot and groove sizes encountered in jig, fixture and component work. The analogue format avoids electronic dependencies, providing a simple, robust tool that integrates directly into established inspection routines and bench setups. Precision mechanics that reduce measurement scatter Fine threads and a defined spindle pitch of 0.5 mm convert hand movement into accurate axial travel; the instrument reads to 0.01 mm while achieving an operational repeatability around ±0.008 mm. The integrated ratchet stop enforces a consistent measuring force and the non‑rotating spindle limits wear on the anvil surfaces, both features helping to keep measurement scatter low and inspection results comparable between operators. For quality control, this mechanical consistency translates into fewer false rejects and steadier process decisions. Slim measuring faces and a frame suited to grooves The micrometer’s measuring faces are formed for slot work, with contact surfaces approximately 0.75 x 6.5 mm, allowing access into narrower grooves without undue contact stress. The robust frame and precise spindle guidance maintain alignment during use, while the non‑digital design ensures immediate availability for repeated checks without battery changeovers or electronic drift. The instrument’s straightforward construction also simplifies routine checks and maintenance. Practical applications and productivity gains Intended for toolrooms, production inspection and fixture verification, the instrument is particularly useful for slot depths, keyways and groove widths where a frame micrometer gives a direct contact reading. The combination of a clear 0.01 mm scale and mechanical force control supports faster throughput on inspection benches and reduces rework by catching deviations early. As part of a disciplined inspection workflow, the device contributes to measurable savings through lower scrap rates and fewer machine downtime events. For tailored advice on how the Metav IndustryLine groove micrometer M307.025 fits specific workshop needs and to arrange supply from Metav Werkzeuge’s European quality hub in Emmerich, please get in touch with our product consultants. Technical data Article number: M307.025 GTIN: 4054469117300 EClass: 21170328 Tariff code: 90173000 Facts Measuring range: 100–125 mm Reading / resolution: 0.01 mm Operational repeatability / accuracy: ±0.008 mm Spindle pitch: 0.5 mm Measuring faces: 0.75 x 6.5 mm Instrument type: analogue frame micrometer Friction ratchet: yes Non-rotating spindle: yes Special features Designed specifically for groove and slot measurement Compact contact faces for narrow grooves Mechanical ratchet for consistent measuring force Robust frame for reduced deflection in the standard range FAQ What is the measuring range of this instrument? The micrometer covers a 100–125 mm range, placing it in the standard workshop class that balances reach and stiffness. What resolution and accuracy can be expected? The device reads to 0.01 mm with a practical repeatability around ±0.008 mm, reflecting the mechanical precision of the spindle and thread. Is the spindle designed to reduce wear? Yes, the spindle is non‑rotating, which preserves the contact surfaces and supports long service life under regular use. How does the ratchet help with measurements? The ratchet stop enforces a consistent measuring force, reducing variability between operators and improving repeatability of groove checks. Which applications suit this micrometer best? The instrument is ideal for slot, keyway and groove inspection in toolmaking, fixture assembly and routine machine-shop quality control, where a slim contact face and stable frame are needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Outside Micrometer Ratchet Thimble Matt Chrome Finish, 0.5mm Pitch, 6.5mm Spindle - Metav IndustryLine
Combine dependable ratchet control with a 100–125 mm measuring range and a matt‑chrome measuring drum to secure reproducible, workshop‑grade results. Order this robust outside micrometer directly via Metav Werkzeuge or consult our team for application advice. M304.612 outside micrometer — 100–125 mm, ratchet stop (Metav IndustryLine) M304.612 is an outside micrometer designed for routine inspection and workshop measurement tasks, providing consistent contact pressure and clear mechanical graduations for repeatable results. 100–125 mm measuring range Ratchet stop for reproducible contact pressure Matt‑chrome measuring drum and painted frame Consistent accuracy for routine inspection The instrument is an analogue outside micrometer tailored to the standard workshop envelope. With a measuring range of 100–125 mm and a reading of 0.01 mm, the device delivers the resolution expected for general mechanical control tasks. The ratchet stop ensures each measurement is taken with the same contact force, reducing operator‑dependent variation and supporting repeatable pass/fail decisions on production lines. Built for repeatable handling and longevity A lacquered frame and a matt‑chrome measuring drum combine corrosion resistance with low glare for easier reading under workshop lighting. The spindle uses a 0.5 mm pitch, which, together with the clear barrel graduations, gives tactile feedback and precise adjustment during setup. The tool’s robust construction suits frequent handling and contributes to long operational life, lowering downtime for replacements. Practical benefits for everyday quality control As a mechanical instrument conforming to DIN 863, the micrometer offers a straightforward, maintenance‑friendly solution for measuring external dimensions of components where standard accuracy and reliability are required. The compact design supports quick checks at the bench or next to machining centres, so inspection routines can be integrated without specialised training or digital infrastructure. Contact Metav Werkzeuge for tailored advice or a quotation on the Metav IndustryLine outside micrometer with ratchet stop Technical Data SKU: M304.612 GTIN: 4054469117171 Standard: DIN 863 Numbers / Core technical data Measuring range: 100–125 mm Reading: 0.01 mm Spindle diameter: 6.5 mm Spindle pitch: 0.5 mm Weight: 1.1 kg Tariff number: 90173000 Designs / Special features Ratchet stop for reproducible contact pressure Painted frame Matt‑chrome measuring drum Analogue mechanical instrument Category: Micrometers FAQ What measuring range does this micrometer cover? The Metav IndustryLine outside micrometer M304.612 covers a measuring range of 100–125 mm, suitable for standard workshop and inspection tasks. What resolution and graduations are provided? This analogue micrometer offers a 0.01 mm reading via barrel graduations, combined with a 0.5 mm spindle pitch for fine adjustment. How does the ratchet stop improve measurements? The ratchet stop on M304.612 limits applied torque at the spindle, ensuring each measurement is taken with consistent contact pressure and reducing operator variation. Is the instrument compliant with industry standards? Yes, the device is manufactured to meet DIN 863, reflecting conventional requirements for outside micrometers used in mechanical inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Outside Micrometer With Ratchet, 0.01mm Graduation, Powder-Coated Blue, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a ratchet mechanism for repeatable measuring force, a 0.01 mm graduation for fine resolution, and robust construction to keep quality control flowing smoothly; order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine M304.412 Outside Micrometer – 100–125 mm, 0.01 mm graduation A Metav IndustryLine M304.412 outside micrometer designed for accurate external measurements of shafts and components in general workshop and production settings, featuring a ratchet stop and a powder‑coated frame for durability. Ratchet for consistent measuring force 0.01 mm graduation for fine resolution Compliance with DIN 863 standard Powder‑coated frame and matt‑chromed drum Consistent repeatability for production measurement The ratchet drive combined with a precisely machined spindle delivers reproducible measuring force, reducing operator variation and improving process reliability. With a measuring range of 100–125 mm and a graduation of 0.01 mm, the instrument suits routine dimensional checks and incoming inspection tasks where repeatability is essential. The instrument’s construction focuses on straightforward operation and quick measurement cycles to keep throughput steady while maintaining documented accuracy. Durable design that lowers maintenance needs A powder‑coated frame resists workshop wear while the matt‑chromed measuring drum reduces glare and improves legibility. The measuring faces are hardened, ensuring long‑term stability against wear from frequent contact with metal parts. The spindle pitch of 0.5 mm and a robust spindle profile contribute to smooth travel and low backlash, meaning fewer adjustments and less downtime for recalibration or repair when the gauge is used in regular production environments. Practical features for everyday metrology Built to DIN 863 standards, the micrometer integrates familiar mechanical controls and a ratchet stop for tactile feedback, making training quick and measurement routines intuitive. The analogue readout provides a direct, battery‑free solution that is inherently reliable for shop floors where electronics may be undesired. Supplied as a compact, workshop‑ready measuring tool, the gauge supports efficient standard checks and is suitable for metalworking, repairs and assembly operations where nominal tolerances are monitored. Choose the Metav IndustryLine M304.412 outside micrometer for stable, repeatable external measurements and contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data Article number: M304.412 GTIN: 4054469116914 Category: Messschrauben (micrometers) Standard: DIN 863 Manufacturer: Metav IndustryLine Facts Measuring range: 100–125 mm Resolution/graduation: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Special features Ratchet stop for repeatable measuring force Powder‑coated frame Matt‑chromed measuring drum Hardened measuring faces Analogue mechanism, no battery required FAQ What is the measuring range and resolution of this micrometer? The Metav IndustryLine M304.412 outside micrometer covers 100–125 mm with a 0.01 mm graduation suitable for routine workshop checks. Is the instrument compliant with recognised standards? Yes, the micrometer is manufactured to DIN 863, ensuring it meets established requirements for mechanical micrometers. Does the device require batteries or electronic maintenance? No, the M304.412 uses an analogue mechanical readout and requires no batteries, reducing maintenance needs on the shop floor. Are the measuring faces durable for frequent use on metal parts? The instrument features hardened measuring faces and a matt‑chromed drum designed for long‑term durability under regular metal contact. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Ratchet-Stop Outside Micrometer, 0.004mm Accuracy, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of 0.004 mm accuracy together with a ratchet stop and a traceable ISO 17025 calibration certificate ensures reproducible external measurements and dependable quality control; order the instrument via Metav Werkzeuge or consult the Metav team for application advice. Micrometer 100–125 mm – 0.004 mm accuracy, ratchet stop (Microtech Metrology) The Micrometer is an outside measuring instrument engineered for precise external dimension checks in production and inspection environments. High accuracy 0.004 mm Ratchet stop for consistent force ISO 17025 calibration certificate included 100–125 mm measuring range Precise measurement for repeatable quality This micrometer focuses on delivering repeatable results where tolerance adherence matters. With a specified accuracy of 0.004 mm and a reading increment of 0.01 mm, the instrument reduces measurement uncertainty for shafts, rings and turned parts. The compact anvil with Ø6.5 mm contact area concentrates the measuring force to the component, helping to minimise edge effects and improving consistency when comparing series-produced items. The mechanical design supports routine inspection tasks and process control within machine shops and small production cells. Ergonomic handling and instrument control Designed for regular use, the tool features a ratchet stop micrometer head that enforces a uniform measuring torque and thus lowers operator-induced variation. The mechanical, analog format provides immediate tactile feedback and eliminates dependency on batteries, supporting uninterrupted shop-floor use. A clearly graduated sleeve simplifies reading and verification during rapid sampling, while the robust frame resists deformation under normal workshop handling, ensuring dimensional stability across repeated measurements. Traceability, compliance and operational confidence Delivered fully calibrated with an ISO 17025 certificate, the device integrates into documented quality systems and audit trails with ease. The certificate confirms laboratory calibration traceable to national standards, making the micrometer suitable for incoming inspection, in-house calibration benches and formal verification procedures. Beyond the technical credentials, procurement via Metav offers logistical reliability and access to expert guidance, aligning shop-floor needs with measured assurance and reducing risk for buyers who require consistent accuracy and documentation. Contact Metav Werkzeuge in Emmerich for an application consultation or to request the ISO 17025 certificate and detailed technical data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 110111251 Manufacturer: Microtech Metrology GTIN: 4061905459153 Type: Outside micrometer Analog: yes Numbers / Core technical data Measuring range: 100–125 mm Accuracy: 0.004 mm Resolution (reading): 0.01 mm Anvil diameter: Ø6.5 mm Special features Ratchet stop micrometer head Calibration certificate included (ISO 17025 (Ilac MRA)) High accuracy mechanical instrument Suited for external measurements FAQ What measuring range does the instrument cover? The micrometer covers a measuring range of 100–125 mm, suitable for medium-sized components and routine workshop checks. Is the micrometer delivered calibrated? Yes. The product is supplied with a calibration certificate issued to ISO 17025, confirming traceability and laboratory calibration. How does the ratchet stop improve measurement consistency? The ratchet stop enforces a uniform measuring torque, reducing operator-dependent variation and improving repeatability when using the micrometer. What resolution and accuracy can be expected from this micrometer? The instrument provides a reading resolution of 0.01 mm and an accuracy specification of 0.004 mm, appropriate for standardised inspection tasks. Is this instrument suitable for continuous shop-floor use? Yes. The mechanical, analog design and robust frame make the micrometer well suited to regular workshop inspection and process-control sampling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100-125mm Three-Point Internal Micrometer Digital, Hardened Measuring Faces, Supplied in Case - Metav IndustryLine
Take advantage of a compact three‑point measuring system combined with a digital readout and robust construction to ensure repeatable internal measurements for workshop and quality‑control tasks. The instrument delivers fine resolution for detailed inspection and can be ordered directly via Metav Werkzeuge or discussed with Metav consultants for specification matching. Three‑point internal micrometer M312.256 — digital inside micrometer, 100–125 mm range (Metav IndustryLine) The Three‑point internal micrometer M312.256 is a digital inside micrometer designed for accurate internal diameter measurement in machine construction, toolmaking and inspection environments. Digital display with mm/inch function High resolution: 0.001 mm reading Measuring range 100–125 mm Hardened measuring faces for durability Precise measurement performance for quality control The three‑point measuring concept provides a stable contact geometry that centres automatically in bores, enabling repeatable results across multiple measurements. With a resolution of 0.001 mm and a stated accuracy of ±0.006 mm, this digital inside micrometer (M312.256) suits standard workshop and inspection tasks where traceable, fine measurement is required. The electronic display supports ABS and PRESET functions, which reduce manual interpolation and speed up serial checks; the result is fewer transcription errors and a smoother inspection workflow. Durable design to withstand daily workshop use Constructed for regular use in industrial settings, the instrument features hardened measuring faces to resist wear and maintain measurement integrity over time. A measuring depth of 140 mm allows access to deeper bores and internal features, while the solid build contributes to stable handling and consistent contact force. The tool is supplied without a setting ring; this makes it simple to integrate into existing calibration routines or to use with customer‑specific references. Where robustness matters, the design reduces rework and supports long‑term repeatability. Integrated readout and data transfer for process efficiency The electronic readout offers ON/0, mm/inch, ABS, PRESET and HOLD functions for flexible operation in mixed workflows. The unit includes an RB 4 data output, enabling connection to data collection systems or inspection software for documentation and SPC workflows. By combining a clear digital display with straightforward data export, the instrument helps shorten measurement cycles and supports rational decision‑making in quality control. For technical integration or advice on connecting the output to measurement systems, Metav Werkzeuge’s advisors are available to assist. Choose Metav IndustryLine’s three‑point internal micrometer for reliable in‑house inspection and process integration; contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M312.256 GTIN: 4054469119984 Customs tariff number: 90173000 Core specifications Measuring range: 100–125 mm Resolution (reading): 0.001 mm Accuracy: ±0.006 mm Measuring depth: 140 mm Weight: 2.6 kg Features Digital display: ON/0-, mm/inch-, ABS-, PRESET- and HOLD‑button functions Data output: RB 4 Hardened measuring faces Delivered without setting ring FAQ What measuring range does this inside micrometer cover? The measuring range is 100–125 mm; the instrument is intended for internal diameter measurement within this span and is classified for standard workshop use. What resolution and accuracy can be expected? Resolution is 0.001 mm with an overall accuracy of approximately ±0.006 mm, which supports precise shop‑floor inspection and routine quality checks. Is the device suitable for deep bore measurements? Yes, the measuring depth of 140 mm permits access to deeper internal features and larger bore depths typical in general mechanical engineering. Which digital functions and interfaces are available? The readout provides ON/0, mm/inch, ABS, PRESET and HOLD functions and an RB 4 data output for connection to data capture systems or inspection software. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Three-Point Internal Micrometer For Blind Hole Measurement, Rack Stop, Supplied In Case - Metav IndustryLine
Combining three-point contact, a ratchet spindle and a 100–125 mm measuring range, this instrument delivers repeatable internal measurements for blind holes and similar bores; its hardened faces and matt‑chrome vernier provide long-term stability. Order via Metav Werkzeuge for prompt specification support and availability. Three-point internal micrometer M312.146.S — Three-point internal micrometer, 100–125 mm, Metav IndustryLine The three-point internal micrometer M312.146.S is a precision analogue instrument for reliable internal diameter measurement, especially suited to blind‑hole bores in machine construction and tooling. Three-point contact for blind holes Measurement range 100–125 mm Accuracy 0.006 mm for repeatable results Ratchet spindle for consistent measuring force Matt‑chrome vernier and scale finish Accurate blind‑hole measurement with repeatable results The three‑contact measuring head is designed to centre automatically in blind holes, producing consistent contact at three points and reducing alignment error. Combined with a ratchet spindle, the device ensures reproducible measuring force, so readings are less dependent on operator variation. The instrument’s accuracy of 0.006 mm and reading resolution of 0.005 mm support tight tolerances in quality control. These design choices translate into fewer reworks and more reliable inspection records when assessing internal diameters and bore profiles. Practical range and secure handling for workshop use Classified in the Standard (100–300 mm) category, this micrometer covers common workshop requirements while remaining manageable in single‑person operation. The measuring range of 100–125 mm and a measuring depth of 140 mm allow access into deeper bores without sacrificing stiffness. At approximately 2.9 kg, the device balances robustness with practical handling, making it suitable for toolrooms, production control and setup operations where repeatability and durability are required. Robust construction and low maintenance The vernier and scale are matt‑chromed to resist wear and to maintain legibility under industrial conditions. The presence of hardened measuring faces increases wear resistance at the contact points, extending service life in rigorous use. As an analogue instrument, it avoids electronic vulnerabilities and requires only standard mechanical upkeep; lubrication and occasional surface cleaning are typically sufficient to preserve performance. Note that the delivery is without a setting ring, so calibration or setting equipment should be prepared as required for specific workflows. Application focus: blind holes and precision assemblies Specifically intended for the measurement of blind‑hole bores, the instrument is useful in inspections of castings, turned parts and assembled housings where through‑measuring tools are impractical. The three‑point arrangement simplifies centring in tapered or slightly irregular bores and supports quick comparative checks during setup. This makes the micrometer a practical companion for quality engineers, maintenance technicians and workshops demanding dependable internal measurements across production batches. For specification advice, availability or to arrange a demonstration of technical suitability contact Metav Werkzeuge — Metav IndustryLine precision is delivered from Emmerich with experienced support Technical Data SKU: M312.146.S GTIN: 4054469158686 ECLASS: 21170335 ETIM: EC003590 Tariff number: 90173000 Facts Measurement range: 100–125 mm Measuring depth: 140 mm Accuracy: 0.006 mm Reading: 0.005 mm Weight: 2.9 kg Special features Three‑point internal measurement For blind‑hole bores Ratchet spindle for constant force Analogue vernier scale matt chrome Hardened measuring faces Delivery without setting ring FAQ What is the intended use of this instrument? The three‑point internal micrometer M312.146.S from Metav IndustryLine is intended for precise internal diameter measurement, with a particular focus on blind‑hole bores and similar internal geometries. How deep can measurements be taken reliably? The tool provides a measuring depth of 140 mm, which allows access into deep bores while maintaining stability for accurate internal readings. What accuracy and resolution can be expected? The micrometer has an accuracy of 0.006 mm with a reading resolution of 0.005 mm, suitable for workshop and quality‑control tasks requiring tight tolerances. Are measuring faces hardened and corrosion‑resistant? Yes, the instrument features hardened measuring faces and a matt‑chrome vernier and scale to enhance wear resistance and legibility in industrial environments. Is a setting ring included for calibration? Delivery is made without a setting ring; calibration or a setting standard should be arranged separately for initial setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Three-Point Internal Micrometer For Blind Holes, Digital Display, Hardened Measuring Faces, Supplied In Case - Metav IndustryLine
The combination of a digital readout, a 100–125 mm measuring range and a notable 0.006 mm accuracy provides reliable, repeatable results in blind‑hole inspection. Benefit from a robust measuring depth of 140 mm and integrated data output for process control. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Three-point internal micrometer M312.256.S — digital, 100–125 mm range (Metav IndustryLine) The three-point internal micrometer M312.256.S is a precision digital instrument designed for accurate measurement of blind holes and internal diameters in workshop and production environments. Digital readout with ABS and mm/inch functions Measuring range 100–125 mm High precision: 0.006 mm accuracy 140 mm effective measuring depth Designed for blind-hole measurement Precise measurement for blind holes and deep bores The three‑point internal micrometer is engineered specifically for blind‑hole measurement, where a stable contact and centralising interaction are essential. Its three‑point spindle ensures concentric contact with the bore, reducing runout and measurement scatter. With a measuring range of 100–125 mm and an extended reach of measuring depth 140 mm, the gauge covers medium‑sized bores that commonly occur in jigs, housings and larger assemblies. The specified 0.006 mm accuracy supports quality control tasks where tight tolerances are required, improving first‑pass yield and reducing rework. Digital features that support fast quality control and traceability Equipped with a digital readout offering ON/0-, mm/inch, ABS, PRESET and HOLD keys, the instrument simplifies reading and shortens inspection time. The display’s resolution of 0.001 mm allows fine judgement of dimensional deviations, while the RB 4 data output enables connection to documentation systems or SPC equipment for process control. These functions together translate into measurable workflow advantages: fewer transcription errors, faster logging of measurements and easier integration into production data streams, helping to maintain consistent quality standards. Robust construction and workshop usability The gauge combines a stable frame with hardened measuring faces, improving wear resistance and maintaining measurement integrity over prolonged use. The tool’s mass (approx. 2.6 kg) and ergonomic layout deliver a steady feel when positioning in bores, while the three‑point contact mechanism centres reliably even in slightly tapered cavities. Supplied without an adjustment ring, the instrument is nonetheless suitable for precise setting with standard rings or masters, enabling straightforward calibration routines. Clear labelling of functions and a rugged design reduce downtime and support continuous operation in demanding shopfloor conditions. For precise internal inspections and reliable data capture, contact Metav Werkzeuge to discuss application suitability or to order the Metav IndustryLine three‑point internal micrometer M312.256.S directly from our Emmerich facility. Technical data Article number: M312.256.S GTIN: 4054469158952 Manufacturer: Metav IndustryLine Category: Micrometers / Internal measuring instruments Data output: RB 4 Facts Measuring range: 100–125 mm Resolution: 0.001 mm Accuracy: 0.006 mm Measuring depth: 140 mm Weight: 2.6 kg Special features Digital display: ON/0-, mm/inch-, ABS-, PRESET- and HOLD buttons Designed for blind‑hole measurement Hardened measuring faces Delivery without setting ring FAQ What measurement tasks is this instrument optimised for? The three‑point internal micrometer M312.256.S is optimised for precise inspection of blind holes and medium‑sized internal diameters where a centralising three‑point contact improves repeatability. How precise is the measurement and what resolution does the display offer? The instrument achieves an accuracy of 0.006 mm with a display resolution of 0.001 mm, allowing fine discrimination of dimensional deviations during quality checks. Can measurement data be exported for statistical process control? Yes. The micrometer provides a RB 4 data output suitable for connection to logging systems or SPC devices to support traceable quality documentation. Is a setting or calibration ring included with delivery? Delivery is made without a setting ring; a suitable calibration ring or master should be used to verify or preset the instrument before production measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Three-Point Internal Micrometer Matt Chrome Scale And Vernier, Ratchet, Case - Metav IndustryLine
Take advantage of precise internal measurement across the 100–125 mm range combined with a 0.005 mm vernier resolution and a ratchet stop for consistent measuring force. Order the instrument directly via Metav Werkzeuge or consult our advisors for application guidance. Three-point internal micrometer M312.146 — 100–125 mm range, ratchet stop (Metav IndustryLine) The three-point internal micrometer M312.146 is a workshop-grade inside-measuring instrument for accurate bore and recess measurement within the 100–125 mm span, suitable for routine inspection and machine-shop use 100–125 mm measuring range Ratchet stop for constant measuring force Hardened measuring faces for durability Vernier scale, 0.005 mm resolution High-accuracy readings for repeatable inspection The three-point internal micrometer is engineered to deliver repeatable, high-accuracy measurements where component fit is critical. The integrated vernier scale (0.005 mm) enables fine interpolation beyond the main scale, while the instrument's stated accuracy of 0.006 mm provides a verifiable tolerance for quality control. This precision reduces rework and inspection uncertainty by offering a clear, analogue readout for operators familiar with vernier reading. Classified in the Standard (100–300 mm) group, the micrometer strikes a practical balance between reach and rigidity suitable for general machine‑shop tasks. Robust mechanics for consistent contact and longevity Designed for everyday use in demanding environments, the instrument features hardened measuring faces, ensuring wear resistance at the contact points and maintaining measurement integrity over time. The ratchet stop enforces a uniform measuring force, reducing operator-induced variation and improving reproducibility on serial checks. A measuring depth of 140 mm allows access to deeper bores and shoulders, and the robust construction supports stable three‑point contact that centres on circular bores for reliable diameter assessment. Practical handling and workshop application As an analogue, three‑point internal measuring tool, the micrometer combines straightforward operation with workshop durability. The matt‑chrome scale and vernier are finished for reduced glare and clear legibility. The instrument is supplied without an adjustment ring, so setting procedures should be planned into the initial inspection routine. Its design suits fitters, inspection technicians and maintenance engineers who require a dependable mechanical solution for inside-diameter checks without the need for electronic data output. For precision inside measurements choose the Metav IndustryLine three-point internal micrometer and contact Metav Werkzeuge for tailored advice and order placement via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M312.146 GTIN: 4054469119526 EClass: 21170335 ETIM: EC003590 Facts Measuring range: 100–125 mm Measuring depth: 140 mm Resolution (vernier): 0.005 mm Stated accuracy: 0.006 mm Weight: 2.9 kg Special features Three-point internal measurement Scale and vernier matt chrome plated Hardened measuring faces Analogue instrument with ratchet stop Delivery without setting ring FAQ What measuring range does the three-point internal micrometer cover? The three-point internal micrometer M312.146 covers a measuring range of 100–125 mm, suitable for standard workshop bores. What resolution and accuracy can be expected from this instrument? The M312.146 offers a vernier resolution of 0.005 mm with a stated accuracy of 0.006 mm, providing fine interpolation for inspection tasks. Is the instrument digital or analogue? The three-point internal micrometer M312.146 is an analogue instrument with a vernier scale and a ratchet stop for consistent measuring force. Is a setting ring included with the delivery? Delivery for the M312.146 is without a setting ring, so users should arrange a reference gauge if serial calibration or zero checks are required. What measuring depth and handling features does the micrometer provide? The M312.146 has a measuring depth of 140 mm and a ratchet stop to ensure uniform pressure; the three‑point contact design centres reliably in bores for reproducible diameter readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Three-Point Internal Micrometer Pistol Grip Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a fully calibrated, ISO 17025-backed instrument that combines reliable three-point centring, wireless data transfer and an ergonomic pistol grip for consistent, audit-ready internal diameter measurement — order via Metav Werkzeuge or consult the Metav team for application advice. Three-point internal micrometer (pistol grip) by Microtech Metrology — 100–125 mm, 1.54" colour touchscreen A three-point internal micrometer engineered for precise internal diameter measurement in machine shops and quality control, combining stable centring with digital data integration. *ISO 17025-calibrated with traceable certificate *Wireless and USB data output for integration *1.54" colour touchscreen with microcomputer *High precision: 0.004 mm accuracy, 100–125 mm range Precision where repeatability matters The instrument uses a three-point measurement head to centre automatically in bores and recesses, reducing eccentricity and improving repeatability compared with two-point gauges. For the 100–125 mm measuring range this design delivers consistent contact around the bore circumference, which reduces measurement scatter. The specified 0.004 mm measurement accuracy represents the instrument's tight tolerance band, making it suitable for standard and near‑high‑precision applications in production control and incoming inspection. Fast digital workflow and lossless data capture A built-in microcomputer and 1.54" colour touchscreen provide immediate readout and simple menu navigation; the instrument records readings at a fine visual step thanks to the 0.0001 mm display resolution. Data export via wireless and USB enables seamless transfer to SPC systems, spreadsheets or collection terminals, avoiding transcription errors and accelerating reporting. This digitised workflow shortens inspection cycles and improves traceability for batch documentation. Ergonomic handling for stable results The pistol grip and compact electronics shift the instrument towards one-handed, steady operation that helps to reduce operator-induced variance. Dual measuring depths (130 mm and 150 mm) extend reach into deeper bores without compromising stiffness, so larger components and assemblies can be inspected without special fixturing. The result is fewer reworks, faster throughput and a lower risk of measurement-related quality issues on the shop floor. Calibrated and ready for quality systems Delivered fully calibrated with an ISO 17025 traceable certificate, the instrument supports audit readiness and formal quality procedures. The calibration guarantees traceability to national standards, simplifying acceptance by quality departments and external auditors. For workshops and laboratories seeking a reliable digital solution, the combination of robust mechanical centring, digital output and accredited calibration provides both the technical foundation and the documentation required for controlled inspection routines. For accredited measurement and digital integration with Microtech Metrology instruments, contact Metav Werkzeuge in Emmerich for ordering and calibration information: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 133512510 GTIN: 4061905041518 Manufacturer: Microtech Metrology Measurements and accuracy Measuring range: 100–125 mm Measuring depth: 130 mm / 150 mm Display resolution: 0.0001 mm Accuracy: 0.004 mm Features and interfaces Three-point internal measuring head Pistol grip with integrated microcomputer Display: 1.54" colour touchscreen Data output: Wireless and USB Digital instrument, ISO 17025 calibration and certificate included FAQ What is the typical application for this three-point internal micrometer? The three-point internal micrometer from Microtech Metrology is intended for accurate internal diameter checks in production, toolrooms and quality control, covering bores and recesses in the 100–125 mm range. Is a calibration certificate supplied with the instrument? Yes — the instrument is delivered fully calibrated under ISO 17025 and comes with a traceable calibration certificate suitable for audit documentation. How are measurements transferred to analysis systems? Measurements can be exported wirelessly or via USB from the instrument's microcomputer to SPC software, spreadsheets or data loggers for immediate processing. What level of operator influence can be expected when using this instrument? The pistol grip design and three-point centring reduce the effect of manual positioning and pressure, improving repeatability and lowering operator-induced variance. Which SKU should be ordered for this model? Order SKU 133512510 for the Microtech Metrology three-point internal micrometer with 100–125 mm range Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100-125mm Three-Point Internal Micrometer Self-Centering, 0.008mm Accuracy, Plastic Case - Metav IndustryLine
Take advantage of the combination of precise three‑point measurement, reproducible analogue readout and a robust design for reliable internal bore inspection. The self‑centring measuring system and clear resolution ensure faster set‑up and fewer rejected parts. Order the instrument directly via Metav Werkzeuge or consult our experts for application advice. Dreipunkt-Innenmessschraube M836.719 — Three-point internal micrometer, 100–125 mm, self‑centring (Metav IndustryLine) The Dreipunkt-Innenmessschraube is a three‑point internal micrometer designed for accurate bore measurements in workshop and production settings, offering a self‑centring mechanism for consistent alignment Three‑point self‑centring measuring system Measuring range 100–125 mm Resolution 0.005 mm readout Accuracy ±0.008 mm Dependable three‑point alignment for repeatable bores The three‑point contact geometry centres automatically inside cylindrical bores, reducing alignment time and operator variability. By distributing contact forces over three hardened measuring faces, the instrument minimises tilt and provides reproducible results across multiple measurements. This translates into fewer rework cycles and a more predictable production flow, especially when inspecting housings and bearing seats. Clear analogue readout with industrial precision An analogue reading with a 0.005 mm scale gives tactile feedback and allows fine adjustments without electronic dependence. Combined with an accuracy of ±0.008 mm, the instrument suits quality control tasks where visual verification and immediate feel are valued. The specified tolerances place this tool well within typical workshop requirements for fine mechanical components, delivering confident go/no‑go decisions at the bench. Built for workshop use and standard‑range versatility Classified in the standard range (100–300 mm), this internal micrometer bridges reach and stiffness for common machining tasks. The presence of dedicated measuring faces supports interior surfaces and steps; the robust spindle and frame construction ensure long‑term stability under frequent use. Its design is particularly helpful when measuring medium‑sized bores where one‑handed handling and quick setup are priorities. Practical benefits for inspection and production control Used across maintenance, toolrooms and small batch production, the instrument speeds up inspection routines and improves traceability of measurements. The self‑centring feature reduces operator training time, while the analogue readout keeps workflows simple and reliable. Backed by Metav’s quality filtering for the European market, the device contributes to consistent outcomes and reduced scrap rates. Contact Metav Werkzeuge to discuss how the Metav IndustryLine three‑point internal micrometer M836.719 can be integrated into incoming inspection or process control; technical consultants are available to advise on measurement strategy and compatibility Technical data Article number: M836.719 GTIN: 4061905040733 eClass: 21170335 ETIM: EC003590 Manufacturer: Metav IndustryLine Facts Measuring range: 100–125 mm Resolution / reading: 0.005 mm Accuracy: ±0.008 mm Analogue instrument Special features Self‑centring three‑point system Measuring faces present Analogue vernier readout Category: Micrometers / Internal micrometer (three‑point) FAQ What measurement range does this instrument cover? The instrument covers a measuring range of 100–125 mm, making it suitable for standard workshop bore measurements. How reproducible are results with the three‑point mechanism? The three‑point self‑centring system of the M836.719 ensures consistent alignment and repeatable readings, reducing operator‑related variance. Is the readout electronic or analogue? This model uses an analogue readout with a 0.005 mm scale for precise manual interpretation without electronic components. For which applications is this micrometer recommended? It is recommended for inspection of medium‑sized bores such as housings, bearing seats and similar internal diameters where standard‑range coverage and repeatability are required. Does the instrument include hardened measuring faces? The instrument is supplied with dedicated measuring faces suitable for interior surfaces, supporting reliable contact and longevity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Three-Point Internal Micrometer Self-Centring With Hardened Measuring Faces In Plastic Case - Metav IndustryLine
Precision blind‑hole inspection is facilitated by the combination of a self‑centring three‑point head, carbide measuring faces and an accuracy of ±0.005 mm; order the MS908.663 via Metav Werkzeuge or consult our advisors for specification support. MS908.663 — three‑point internal micrometer with self‑centring head and ±0.005 mm accuracy (Metav IndustryLine) A self‑centring three‑point internal micrometer MS908.663 designed for fast, repeatable measurement of blind holes in workshop and production environments. Self‑centring three‑point measuring head Accuracy ±0.005 mm for repeatable results Carbide measuring faces for long service life Delivered in a protective transport case Precise blind‑hole measurement with minimal operator error The three‑point measuring concept produces a natural centre‑finding action that stabilises the instrument inside a blind hole, reducing eccentricity and operator influence. With an analogue reading of 0.005 mm and an accuracy of ±0.005 mm, this gauge is suited to quality‑critical internal diameter checks where small deviations matter. The vernier‑style scale enables direct mechanical reading without reliance on batteries or electronics, supporting uninterrupted inspections on the shop floor. This combination of mechanical reliability and fine resolution promotes consistent pass/fail decisions during incoming inspection and first‑off checks. Built for demanding workshop use and long‑term repeatability Constructed with carbide measuring faces, the instrument resists wear in daily use and preserves measuring integrity over longer service intervals. The instrument’s physical length of 145 mm and measuring span of 100–125 mm places it in the standard measuring range for general machine‑shop applications, offering a practical balance between reach and rigidity. The robust design and hardened contact surfaces make the micrometer tolerant of routine handling; the supplied protective transport case reduces the risk of damage during storage and transit, keeping calibration stability intact. Practical advantages for process control and inspection routines Using a self‑centring, three‑point internal gauge streamlines internal diameter checks in blind holes, bores and recesses, enabling faster set‑ups at the bench or on the machine. The instrument’s repeatable seating and fine resolution help to reduce scrap and rework by catching dimensional drift earlier in the process. As an analogue instrument it integrates easily into established measurement routines and inspection sheets, while its mechanical simplicity minimises downtime compared with devices that rely on electronics. Typical applications and handling guidance The micrometer is intended for blind‑hole and internal diameter measurements in general engineering, toolroom checks and production quality control. For best results, ensure clean contact surfaces and a stable seating in the bore before taking a reading; the three‑point head will centre itself, but careful alignment reduces measurement scatter. Periodic verification against a gauge block or master ring is recommended to confirm ongoing accuracy and to schedule recalibration when necessary. The instrument’s durability and simple operation make it a practical choice for repetitive internal measurements on ferrous and non‑ferrous components. For reliable blind‑hole inspection with Metav IndustryLine precision, contact Metav Werkzeuge for purchase and expert advice by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: MS908.663 Name: Three‑point internal micrometer Brand: Metav IndustryLine Type: Analogue internal measuring instrument Numbers / Core technical data Measuring range: 100–125 mm Measuring length: 145 mm Reading / Resolution: 0.005 mm Accuracy: ±0.005 mm Special features / Design Self‑centring three‑point measuring head Carbide measuring faces Delivered in a protective transport case Suitable for blind‑hole (blind bore) measurement FAQ How does the three‑point head help with blind‑hole measurement? The three‑point geometry of the MS908.663 automatically centres inside a blind hole, reducing eccentricity and improving repeatability of internal diameter readings. What level of accuracy and resolution can be expected? The instrument provides a resolution of 0.005 mm with an accuracy of ±0.005 mm, making it suitable for tight tolerance internal checks in production and workshop environments. Is the gauge suitable for frequent workshop use? Yes; the carbide measuring faces and robust mechanical construction are designed for daily inspection tasks and extended service life. Can this micrometer measure other internal features besides blind holes? While optimised for blind holes, the instrument can be used for internal diameter checks, recesses and similar internal features where the three‑point contact can seat reliably. What is included with the instrument on delivery? The MS908.663 is supplied complete with a protective transport case to protect the gauge during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-125mm Universal Micrometer With 7 Pairs Of Measuring Inserts, Color 2.4" Touchscreen, IP65, ISO 17025 - Microtech Metrology
Take advantage of high-resolution measurement, robust workshop protection and traceable ISO 17025 calibration to keep quality checks fast and reliable; the combination of 0.005 mm accuracy, Wireless+USB output and included measuring anvils ensures efficient data capture and repeatable results. Order the Universal micrometer directly via Metav Werkzeuge or ask our consultants if needed. Universal micrometer — digital micrometer with 0.005 mm accuracy and ISO 17025 calibration (Microtech Metrology) The Universal micrometer is a workshop-grade digital micrometer for precise external measurements of medium-sized components, offering a protected casing and integrated data output for direct logging in quality environments. ISO 17025 calibrated micrometer ready for use 0.005 mm accuracy for high-precision measurements Wireless and USB data output for seamless logging IP65 protection and 2.4" colour touchscreen Reliable accuracy that shortens inspection cycles With a rated accuracy of 0.005 mm (5 µm) and a solid measurement concept, this instrument reduces repeat inspections and lowers scrap rates. The non-rotating spindle minimises surface damage on delicate parts while ensuring a constant contact geometry, and the compact 2.4-inch colour touchscreen simplifies on-device checks and zeroing. For traceability, the device is supplied calibrated to ISO 17025, which means a fully documented calibration certificate accompanies the instrument and supports audit requirements in production and laboratory settings. Integrates with data systems to speed up documentation Equipped with Wireless and USB data outputs, the micrometer allows direct transfer of measured values into spreadsheets and quality-management systems, eliminating manual entry errors and saving time during batch inspections. The combination of digital readout and networked data capture supports process monitoring and statistical analysis, while the rugged IP65 enclosure keeps electronics protected in demanding shop-floor environments. Included with the instrument are seven pairs of measuring inserts, enabling rapid adaption to different measuring tasks without external tooling. Designed for workshop handling and long-term reliability The construction focuses on easy operation during repetitive checks: a responsive digital display, robust frame geometry and a spindle engineered for consistent travel help maintain measurement stability over long shifts. The measuring inserts expand the micrometer’s practical range of contact shapes and protect reference surfaces from wear, increasing service life and reducing maintenance downtime. Built by a metrology-focused manufacturer, the instrument balances precision engineering with practical features that support production throughput and repeatable quality verification. Contact Metav Werkzeuge today to discuss how the Universal micrometer can be integrated into existing inspection routines or to request additional technical documentation from our measurement specialists. Technical data SKU: 110751258 GTIN: 4061905040375 Manufacturer: Microtech Metrology Facts Measuring range: 100–125 mm Accuracy: 0.005 mm Display: 2.4-inch colour touchscreen Data output: Wireless, USB Protection class: IP65 Calibration: ISO 17025 (certificate included) Special features Non-rotating spindle Includes 7 pairs of measuring inserts Digital instrument for external measurements Suitable for workshop and laboratory use FAQ What level of calibration is supplied with this micrometer? The Universal micrometer is delivered fully calibrated to ISO 17025 and includes a traceable calibration certificate. Can measurement data be exported directly to a computer? Yes, the micrometer supports both Wireless and USB data output for direct transfer of measured values to PC software or data loggers. Is the instrument suitable for use on the shop floor? The instrument’s IP65 protection and robust construction make it appropriate for demanding workshop conditions while maintaining measurement stability. Which measuring range does the micrometer cover? The device covers a 100–125 mm measuring range, making it suitable for medium-sized components and routine inspection tasks. Are different contact forms available for special geometries? Seven pairs of measuring inserts are included, allowing adaptation to a variety of contact geometries and protecting reference surfaces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100-1300mm Internal Rod Measuring Set 0.01mm Resolution, Includes Extensions, Supplied in Case - Metav IndustryLine
Taking advantage of a 100–1300 mm measuring range together with a 0.01 mm reading provides reliable measurement coverage for large bores while keeping inspection times short; the modular extension rods included simplify setup across differing diameters. Order the rod internal measuring set directly via Metav Werkzeuge or consult our specialists for technical advice. Rod internal measuring set (100–1300 mm, 0.01 mm) by Metav IndustryLine The Rod internal measuring set (100–1300 mm, 0.01 mm) is a modular analogue micrometer kit intended for precise internal diameter measurement across large components in workshops and inspection departments. Wide range 100–1300 mm measuring span Fine 0.01 mm resolution scale Analogue micrometer mechanism for stability Includes extension rods for modular use Accurate measurement for large bores and assemblies The set offers a 100–1300 mm measuring span, classified as a long-range internal measuring solution suitable for components that exceed typical workshop micrometres. With a mechanical reading of 0.01 mm, the instrument combines high repeatability with the inherent robustness of an analogue micrometer: the screw-drive spindle supplies consistent contact force and simple, drift-free indications without reliance on electronics. This stability is especially relevant when inspecting cylindrical bores, housings or assemblies where repeatable contact and tactile control reduce rework and inspection time. Modular extensions reduce tool changes and downtime Delivered with extension rods of 25, 50, 100, 200 and 2×400 mm, the kit assembles to reach intermediate diameters without separate instruments. The modular concept shortens setup and calibration sequences, allowing one measuring family to cover a broad spectrum of internal diameters. In practice, this reduces tool inventory and the number of changeovers on the shop floor, improving throughput and lowering the administrative effort tied to spare-parts management. Hardened measuring faces and workshop durability The measuring faces are hardened, which increases resistance to wear and maintains consistent contact geometry during repetitive inspections. Combined with the analogue micrometer drive, the hardened faces ensure stable results over long production runs and make the instrument tolerant to everyday workshop environments. The construction supports robust handling during routine checks while maintaining the precision expected from workshop metrology. Clear benefits for inspection teams and quality control The kit is designed for pragmatic use in machine shops, toolrooms and incoming goods inspection: broad coverage means fewer instrument changes, fine resolution enables detailed acceptance decisions, and the analogue mechanism keeps operation straightforward for trained operators. The result is a measurable improvement in process reliability and a reduction in measurement-related rework, supporting faster decision-making in production and quality workflows. For precise internal measurements across large diameters, contact Metav Werkzeuge in Emmerich for specification matching and ordering of the Metav IndustryLine rod internal measuring set (SKU M310.062) — our consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 to assist with selection and technical queries Technical data Article number: M310.062 GTIN: 4054469118932 ECLASS: 21170335 ETIM: EC003590 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 100–1300 mm Resolution / reading: 0.01 mm Reading type: analogue Hardened measuring faces: yes Set type: modular internal measuring rods Special features Includes extension rods: 25 / 50 / 100 / 200 / 2×400 mm Category: micrometer screw gauges (internal measurement set) Delivery format: set Suitable for long-range internal measurements SKU: M310.062 FAQ What measuring range does the set cover? The rod internal measuring set covers a 100–1300 mm range, making it suitable for large bores and housings. What is the smallest increment readable on the scale? The analogue reading step is 0.01 mm, providing fine resolution for decisive quality checks. Are extension rods included and which sizes are supplied? Yes — the set includes extension rods in 25, 50, 100, 200 and 2×400 mm lengths for modular assembly. Is this instrument suitable for routine shop-floor inspection? The analogue micrometer drive with hardened measuring faces is designed for robust workshop use and repetitive inspection tasks. Which SKU identifies this product? The product is listed under SKU M310.062 from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-150mm Three-Point Inside Micrometer Colour Touchscreen Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of precise three-point measurement, wireless data output with USB, and full ISO 17025 calibration for dependable bore inspection and traceable results; order via Metav Werkzeuge or consult the specialists for application advice. Three-point internal micrometer — digital, 100–150 mm measuring range, Wireless + USB, Microtech Metrology The Three-point internal micrometer is a digital, workshop-ready instrument for repeatable bore and internal diameter checks from 100 to 150 mm, designed for production quality control and laboratory verification. ISO 17025 calibration certificate included Wireless and USB data output Colour 1.5" touchscreen display High repeatability: 0.004 mm accuracy Reliable measurement where it matters The instrument delivers consistent three-point measurement across bores, reducing orientation error and improving repeatability compared with single-point probes. With a specified accuracy of ±0.004 mm, the device supports quality control procedures that demand tight tolerances. The standard-sized measuring range classifies the tool for typical workshop and machine‑shop applications, offering a practical balance between reach and rigidity for medium-sized components. Fast data capture and traceability for production Equipped with Wireless and USB data outputs and a Colour 1.5" touchscreen, the device streamlines data acquisition and logging without manual transcription. The high-resolution reading (0.0001 mm) ensures fine increments are visible on the display, while digital output supports integration into measurement software or SPC workflows. This lowers administrative effort and helps maintain a clear audit trail for batch releases. Practical handling that reduces operator influence The included adjustment ring simplifies zeroing and routine checks, and the three-contact measuring head minimises tilting errors during insertion into bores. A measuring depth of 250 mm allows access to deeper cavities while preserving stability. These ergonomic and mechanical details reduce the effect of operator technique on the measurement result, improving reproducibility across shifts. Certified delivery and industrial readiness This micrometer is supplied fully calibrated to ISO 17025 standards and includes a calibration certificate, making it immediately suitable for accredited quality environments. The combination of high accuracy, digital interfacing and certified calibration positions the instrument as a reliable tool for incoming inspection, in‑process checks and final acceptance testing. Contact Metav Werkzeuge for tailored advice and secure a certified Microtech Metrology three-point internal micrometer (SKU 133715010) with ISO 17025 calibration for your measurement process Technical data Article number: 133715010 GTIN: 4061905074295 Manufacturer: Microtech Metrology ECLASS: 21170335 ETIM: EC003590 Facts Measuring range: 100–150 mm Resolution (reading): 0.0001 mm Accuracy: ±0.004 mm Measuring depth: 250 mm Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Calibration: ISO 17025 certificate included Special features Three-point internal measurement Adjustment ring included Digital operation for SPC integration Suitable for workshop and lab use Delivered calibrated for traceability FAQ Is this instrument supplied calibrated? Yes. The Microtech Metrology three-point internal micrometer (SKU 133715010) is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate. Which measurement range does the instrument cover? The device covers a measuring range of 100–150 mm, which places it in the standard class for workshop and machine‑shop bore inspection tasks. How are measurement results exported? Measurement data can be exported either wirelessly or via USB, enabling direct transfer into inspection software or SPC systems from the Microtech Metrology instrument. What resolution and accuracy can be expected? The display resolution is 0.0001 mm and the specified accuracy is ±0.004 mm, suitable for stringent dimensional checks in production control. Is the touchscreen suitable for use with gloves? The 1.5" colour touchscreen provides clear readout and simple menus; for glove operation, common shop gloves may limit sensitivity—repeatable results are maintained via the device’s stable mechanical design. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100-200mm Micrometer Set Ratchet Thimble, Adjustable Gauges 100/125/150/175mm, Painted Frame Chrome Thimble, DIN 863 - Metav IndustryLine
Take advantage of the combination of repeatable measuring force, 0.01 mm analogue resolution and robust finish for consistent shop-floor results; the set includes setting standards for quick verification. Order the micrometre set directly via Metav Werkzeuge or ask the consultants if clarification is required. Micrometre set M304.621 – outside micrometres 100–200 mm with ratchet stop (Metav IndustryLine) The Micrometre set M304.621 is a four-piece outside micrometre set designed for workshop and inspection use, covering the 100–200 mm range and supplied with setting standards for fast verification Four-piece micrometre set 100–200 mm Ratchet stop for reproducible measuring force 0.01 mm resolution with analogue scale Includes setting standards 100/125/150/175 mm Consistent readings through controlled measuring force Repeatability is central to efficient quality control. The set features a ratchet stop, which ensures a constant measuring torque and reduces operator-induced variance; this makes the instruments especially suitable for batch checks and assembly inspection where reproducible readings matter. With an analogue reading increment of 0.01 mm, the instruments provide clear, workshop-appropriate resolution for external measurements. The spindle pitch and robust spindle geometry contribute to stable movement and reliable contact behaviour throughout the common measurement range. Built for daily handling and long service life Construction focuses on durability and clear legibility. The frames are painted to resist workshop wear while the measuring drums are matt chrome-plated for reduced glare and improved scale visibility. Mechanical components such as the spindle (6.5 mm diameter) and the finely turned drum support steady operation under frequent use. Supplied as a compact, four-piece set, the tooling reduces change‑over time between ranges and is convenient to store and transport as a single unit, helping to streamline routine inspection workflows. Quick verification and practical workshop integration Every set includes dedicated setting standards (100, 125, 150 and 175 mm) so that the instruments can be checked and adjusted on the bench without delay; this supports in-house process control and minimises downtime. The set conforms to DIN 863, reflecting established mechanical micrometre practice, and its composition—four graduated steps covering 100–200 mm—addresses the most common external measurement requirements in metalworking and fabrication. The compact set weight and organised packaging assist in predictable handling and inventory management on the shop floor. Choose the Metav IndustryLine micrometre set M304.621 for dependable, repeatable external measurements and contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for procurement and detailed specifications Technical Data Article number: M304.621 GTIN: 4054469167091 Brand: Metav IndustryLine Category: Outside micrometres set Facts Measuring range: 100–200 mm Number of pieces: 4 Reading increment: 0.01 mm (analogue) Spindle diameter: 6.5 mm Spindle pitch: 0.5 mm Weight (set): 4.0 kg Tariff number: 90173000 Special features Frame: painted Measuring drum: matt chrome-plated Ratchet stop for reproducible measuring force Supplied with setting standards: 100 / 125 / 150 / 175 mm Conforms to DIN 863 Analogue (mechanical) micrometres Supplied in a transport case FAQ What measurement range does the set cover? The four-piece set covers the 100–200 mm range in stepped instruments and includes the listed setting standards for verification. What resolution and reading can be expected? The micrometres use an analogue scale with a reading increment of 0.01 mm and are manufactured to the mechanical customary tolerances referenced by DIN 863. Are setting standards included for verification? Yes, the delivery contains setting standards at 100, 125, 150 and 175 mm to enable quick on‑bench checks and adjustments. Is a calibration certificate supplied with the set? The set is supplied with setting standards for basic verification; a formal calibration certificate is not automatically included with the standard delivery. What materials and finishes are used on the instruments? Frames are painted for durability and the measuring drums are matt chrome‑plated to improve scale contrast and reduce reflections, while internal components are engineered for stable spindle action. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-200mm Outside Micrometer With Four Interchangeable Carbide Faces, Ratchet, Machined Chrome Sleeve - Metav IndustryLine
Benefit from precise, repeatable outside measurements with carbide measuring faces, a ratchet stop for consistent measuring force and four interchangeable anvils for greater versatility — order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. M304.029 Outside Micrometer — 100–200 mm, Carbide Faces (Metav IndustryLine) M304.029 is an outside micrometer designed for workshop and toolroom use across the 100–200 mm range, offering robust construction and repeatable readings for routine and specialist measuring tasks Carbide measuring faces for wear resistance Ratchet stop for repeatable measuring force Four interchangeable anvils for versatile use Fine 0.5 mm spindle pitch with 0.01 mm reading Consistent force and reliable readings for routine inspection The micrometer delivers reproducible results through its ratchet stop, which limits operator influence on measuring pressure and helps maintain consistent contact. Combined with a fine spindle pitch of 0.5 mm and a readable 0.01 mm scale, the instrument achieves an accuracy of ±0.011 mm, providing the rational basis for dependable quality control in daily workshop routines. The analogue design is intentionally simple: read directly from the drum, where a matt-chrome plated drum reduces glare and improves legibility during prolonged use. Greater flexibility with interchangeable anvils Equipped with four interchangeable anvils, the instrument adapts to different geometries without the need for multiple micrometers, shortening set-up times and reducing tool inventory. The combination of carbide measuring faces and changeable anvils extends service life when measuring abrasive or hardened parts, while the ratchet mechanism preserves measuring consistency across repeated operations. This versatility translates into fewer interruptions on the production floor and a clear efficiency argument for purchasing managers seeking measurable gains. Built for workshop handling and traceable quality Constructed to withstand everyday use, the instrument balances robustness and handling: at about 1.8 kg it has the mass to feel stable in the hand while remaining manoeuvrable for frequent checks. The instrument is supplied to a factory standard, with setting points at 100, 125, 150 and 175 mm to assist periodic verification and calibration routines. These practical details support a rational workflow: reliable readings, simple maintenance and long service life, making the micrometer a sound option for machine shops, toolrooms and maintenance departments. For consistent, workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to arrange supply of the M304.029 outside micrometer and discuss the best configuration for the intended application Technical data Article number: M304.029 GTIN: 4054469115863 ECLASS: 21170328 ETIM: EC003590 Category: Messschrauben Facts Measuring range: 100–200 mm Max measuring range: 200 mm Min measuring range: 100 mm Reading: 0.01 mm Accuracy: ±0.011 mm Spindle pitch: 0.5 mm Weight: 1.8 kg Special features Carbide (hardmetal) measuring faces Four interchangeable anvils Ratchet stop Matt-chrome plated measuring drum Analog instrument, factory standard Setting points: 100 / 125 / 150 / 175 mm FAQ What is the measurement accuracy of this micrometer? The micrometer achieves an accuracy of ±0.011 mm and a reading of 0.01 mm, providing reliable results for standard workshop tasks with the M304.029 outside micrometer from Metav IndustryLine. Are the measuring faces suitable for abrasive materials? Yes, the instrument features carbide (hardmetal) measuring faces that resist wear when used on abrasive or hardened components. How does the ratchet stop improve measurements? The ratchet stop on this outside micrometer ensures a consistent measuring force with each measurement, reducing operator-induced variation and improving repeatability. Can the micrometer be adapted for different workpiece geometries? The four interchangeable anvils supplied with the M304.029 allow adaptation to a range of part geometries without needing additional micrometers. Is the instrument suitable for workshop use and frequent checks? Designed for routine use, the micrometer balances robustness and handling; the matt-chrome plated drum improves legibility during repeated inspections. What verification or setting aids are supplied? The instrument includes setting points at 100, 125, 150 and 175 mm to support periodic verification and calibration practices for traceable measurement routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-2100mm Rod Internal Measuring Set 0.01mm Resolution, Includes Extensions, Case - Metav IndustryLine
Take advantage of the combination of a wide measuring range up to 2,100 mm, a fine 0.01 mm indication and hardened contact faces for repeated, reliable internal measurements; order the rod internal measuring set directly via Metav Werkzeuge or consult the technical advisors if further clarification is required. Rod internal measuring set M310.063 — 100–2,100 mm, 0.01 mm by Metav IndustryLine The Rod internal measuring set M310.063 is a modular internal‑diameter measuring system designed for large bores and long‑range inspection tasks in toolrooms and heavy machining environments Modular extensions up to 2,100 mm Readout resolution 0.01 mm Hardened measuring faces for long life Long reach for large components with repeatable stiffness The set covers an internal measuring span from 100 to 2,100 mm, placing it in the Extra‑Long class for large components. This reach is achieved through a system of precision rods that preserve alignment over length, so measurements on housings, large bearings and cylinder bores stay reproducible. The design mitigates typical deflection issues associated with long probes by combining a compact base with stable extension elements, enabling reliable capture of internal dimensions where conventional callipers cannot reach. Precise mechanical indication and robust contact surfaces Measurement is performed via a proven mechanical vernier readout with an indication step of 0.01 mm, providing clear incremental readings for process checks and workshop quality control. The contact faces are hardened to resist wear during repeated use, which preserves reference geometry and extends service life. The analogue readout keeps operation straightforward and robust under workshop conditions, while the fine indication supports precise set‑up and acceptance checks without dependence on batteries or electronics. Modular set for flexible on‑machine and in‑fixture use Supplied as a complete set, the package includes a range of extension rods to configure measuring lengths as needed: extensions of 25 mm, 50 mm, 100 mm, 200 mm and four 400 mm rods are part of the delivery. This modular approach reduces downtime when switching measurement tasks and allows tailored assembly for specific bores or fixtures. The construction suits use in machine‑shop inspection, assembly jigs and maintenance rounds, and the set format simplifies storage and transport between measuring stations. For long‑range internal measurements choose the Metav IndustryLine M310.063 set — contact Metav Werkzeuge for personalised advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M310.063 GTIN: 4054469118949 Category: Messschrauben / measuring screws ECLASS: 21170335 ETIM: EC003590 Customs tariff: 90173000 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 100–2,100 mm Indication / resolution: 0.01 mm Readout type: mechanical vernier (analogue) Rod diameter: 22 mm Set: modular configuration with extensions included Special features / Versions Hardened measuring faces Included extensions: 25 mm, 50 mm, 100 mm, 200 mm, 4 × 400 mm Intended use: internal diameter measurement for large bores and assemblies FAQ What measuring range does the set cover? The M310.063 set covers internal measurements from 100 to 2,100 mm, enabling inspection of large bores and housings. What resolution and readout type are provided? Readings are taken on a mechanical vernier with a resolution of 0.01 mm, giving clear analogue increments for workshop checks. Are the contact faces protected against wear? Yes, the measuring faces are hardened to maintain accuracy and durability during repetitive use. Which extensions are included with the set? The delivery comprises extension rods of 25 mm, 50 mm, 100 mm, 200 mm and four 400 mm rods to configure the required measuring length. Is the M310.063 suitable for on‑machine checks? The modular construction and robust mechanical readout make the set well suited for on‑machine and in‑fixture internal measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100-250mm Three-Point Inside Micrometer Colour Touchscreen, ISO 17025 Calibrated Wireless+USB - Microtech Metrology
Take advantage of precise internal measurement, wireless data transfer and a factory calibration to ISO 17025 for traceable results; the set format with two measuring depths supports flexible workshop and inspection tasks. Order or discuss technical matching directly via Metav Werkzeuge for tailored delivery and documentation support. Three-Point Internal Micrometer – digital internal micrometer with wireless and USB data transfer by Microtech Metrology The Three-Point Internal Micrometer is a digitally enhanced internal measuring instrument designed for reliable bore and recess measurement in standard workshop and inspection environments. Wireless + USB data output Colour 1.5" touchscreen display Supplied fully calibrated to ISO 17025 Supplied as a set of two instruments Dependable precision for routine inspection The instrument combines a three-point contact mechanism with digital electronics to deliver consistent centring and repeatable readings across a range of internal diameters. The mechanical contact arrangement ensures the measuring anvils align concentrically with the bore, reducing operator variation and improving first-pass rates. Classified within the Standard (100–300 mm) measurement category, this solution balances reach and stiffness, making it suitable for general machine‑shop tasks and quality control of medium-sized assemblies. The set format provides two practical measuring depths, supporting measurement of stepped bores and varied components without frequent tool changes. Clear readout and straightforward data handling A 1.5" colour touchscreen simplifies digit entry and inspection workflows, while the combined Wireless and USB outputs allow direct transfer of measurement data into SPC systems or inspection software. For workshops implementing digital documentation, the integrated microcomputer enables quick capture of results and reduces transcription errors compared with manual note taking. The wireless option supports flexible, cable‑free working at benches or in inspection booths; USB offers a reliable hard‑wired route when a secure connection is required. This dual approach supports traceability and makes data archiving more efficient. Calibrated delivery and practical set configuration The instruments are delivered fully calibrated to ISO 17025 with a calibration certificate, providing documented measurement assurance for internal audits and supplier chains. The set includes two instruments with different measuring depths (107 mm and 150 mm), facilitating measurement of a wider variety of internal geometries without long tool changeover times. The digital evaluation and three-point contact help to reduce rework and inspection time, while the rugged construction of the measuring heads is designed for regular shop use. For applications requiring certified traceability and fast data capture, this configuration provides a robust, ready-to-use solution. Contact Metav Werkzeuge GmbH in Emmerich by email info@metav-werkzeuge.com or by phone +49 2822 7131930 to discuss specification, delivery times and integration of Microtech Metrology calibrated internal micrometers into existing inspection processes Technical Data Article number: 133579125 GTIN: 4061905074400 Brand: Microtech Metrology Facts Measurement range: 100–250 mm Measuring depth: 107 mm and 150 mm Display: Colour 1.5" touchscreen Special features Data output: Wireless + USB Digital readout with integrated microcomputer Supplied as a set of two instruments Delivered calibrated to ISO 17025 with certificate Category: internal micrometers (three-point measuring screw) FAQ Is the instrument delivered calibrated and traceable? Yes. The Three-Point Internal Micrometer from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceability. How is measurement data exported from the device? Measurement data can be exported via the instrument's Wireless interface or by connecting the unit with the USB output to inspection software or a PC. What measurement range and depths are covered by the set? The set covers a 100–250 mm measurement range and includes two measuring depths of 107 mm and 150 mm, allowing measurement of stepped bores and different component sizes. Is the three-point contact suitable for workshop use? Yes. The three-point contact design centralises the measuring anvils automatically, improving repeatability and reducing operator-induced variation in typical machine‑shop inspection tasks. Does the product support statistical process control (SPC)? The combined digital electronics and data outputs of this Microtech Metrology internal micrometer facilitate integration with SPC and inspection systems for documentation and analysis. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000-1200mm Digital Micrometer With Ratchet, IP65, ISO 17025 Calibration Certificate - Microtech Metrology
Take advantage of the combination of IP65 protection, ISO 17025 calibration and a 0.001 mm resolution for reliable large‑scale measurement tasks; the rugged construction and Ø50 mm measuring faces ensure repeatable results across long runs. Order the Microtech Metrology digital large‑range outside micrometer directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Digital Large‑Range Outside Micrometer 1000–1200 mm, IP65 The Microtech Metrology digital large‑range outside micrometer is a heavy‑duty, industrial instrument designed for precise external measurements of large components in workshop and production environments. IP65 protection for workshop conditions 0.001 mm resolution on digital display ISO 17025 calibration certificate included Ø50 mm hardened measuring faces Precision where large components demand repeatability The instrument delivers a long measuring span of 1000–1200 mm, engineered for applications that require both reach and stability. The large Ø50 mm measuring faces distribute contact force to reduce local deformation on soft or coated parts, and the integrated friction ratchet supports consistent measuring force. With a display resolution of 0.001 mm, the device provides fine readout detail while the specified accuracy of ±0.018 mm characterises its performance envelope for routine quality checks and production sampling. This balance of range and fidelity makes the tool suitable for fixtures, housings and shafts where single‑pass measurements must be reproducible. Traceability and calibration for quality assurance Delivered with an ISO 17025 calibration certificate, the micrometer arrives fully calibrated and ready for use in calibrated inspection routines. The traceable certificate documents measurement conformity and supports quality management processes in manufacturing and metrology labs. The digital head simplifies data capture and reduces transcription errors, while the included setting rods allow quick verification of zero and end‑stand adjustments. Together, these features minimise downtime during instrument qualification and make the tool a straightforward addition to accredited measurement chains. Robust design for industrial environments Built to withstand shop‑floor conditions, the micrometer is IP65 rated against dust and low‑pressure water jets, enhancing reliability in mixed environments. The construction accounts for handling and transport: the robust frame and mass (9.2 kg) give mechanical stability over the long span, reducing bending and ensuring better repeatability than lighter contraptions in this size class. The electronic module is sealed to keep the measurement electronics protected, extending service intervals and lowering the risk of fault due to contamination. Practical handling and workflow benefits Ergonomics and workflow integration were considered throughout: the digital display provides clear numerical output at 0.001 mm increments for quick decisions on the shop floor, and the instrument includes setting rods for straightforward calibration checks. The combination of a tactile friction ratchet and a precise digital readout speeds up repetitive measurements while guarding against variable hand pressure. As a large‑range outside micrometer it bridges the gap between bench micrometres and multiple smaller gauges, reducing the need for frequent gauge changes on larger assemblies. Contact Metav Werkzeuge for procurement or technical advice on the Microtech Metrology large‑range digital outside micrometer and arrange delivery from our Emmerich facility Technical Data Article number: 110171201 GTIN: 4061905040405 Manufacturer: Microtech Metrology SKU: 110171201 Facts Measuring range: 1000–1200 mm Resolution: 0.001 mm Accuracy: ±0.018 mm Weight: 9.2 kg Protection class: IP65 Measuring faces: Ø50 mm Special features Digital micrometer head Setting rods included ISO 17025 calibration certificate included (Ilac MRA) Friction ratchet for constant measuring force Wide‑range CertiMet series design FAQ What measuring range does this micrometer cover? The Mictech Metrology digital large‑range outside micrometer covers a measuring span of 1000–1200 mm, making it suitable for large‑format external measurements. Is the instrument delivered calibrated and traceable? Yes. The micrometer is supplied with an ISO 17025 calibration certificate, providing traceability and documentation suitable for accredited quality systems. How precise is the digital readout? The digital display provides a resolution of 0.001 mm while the specified overall accuracy is ±0.018 mm, balancing fine readout and practical reproducibility for production checks. Can the micrometer be used in harsh workshop conditions? The device features IP65 protection for resistance to dust and low‑pressure water jets, supporting reliable operation in typical workshop and production environments. What accessories are included for setup and verification? The instrument is supplied with setting rods for zero and span checks and includes a friction ratchet to ensure consistent measuring force during repeated measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000-1200mm Micrometer With Colour Touchscreen, ISO17025 Calibration, Ø50mm Measuring Faces - Microtech Metrology
Take advantage of the combination of sub‑micron resolution, long 1,200 mm measuring capacity and seamless wireless data transfer for reliable, reproducible results in production and inspection. Order the digital long‑range outside micrometer directly via Metav Werkzeuge or ask our consultants if needed. Digital long-range outside micrometer — Microtech Metrology (1000–1200 mm) The Digital long-range outside micrometer is a production-ready measuring instrument for large components, combining a microcomputer interface with precision mechanics to support metrology tasks in workshop, fixture and toolroom environments. Sub‑micron resolution and force control 1.5" colour touchscreen display Wireless and USB data transfer modes CNC‑grade aluminium housing Reproducible precision backed by ISO 17025 calibration This long‑range micrometer is built for traceable results: it is supplied with a calibration certificate (ISO 17025), which documents compliance with recognised laboratory standards and supports quality management systems. The instrument delivers a measured accuracy of ±0.014 mm with a fine display increment of 0.0001 mm, so measurements on large components remain consistent. The integrated microcomputer and calibration record reduce administrative effort and add legal certainty for incoming inspection and final acceptance. Streamlined data flow for modern workshops Connectivity is designed for efficient workflows: the unit offers wireless transfer and USB HID modes, plus compatibility with dedicated apps and system integration. Onboard data handling includes a memory capacity of 2,000 values, folder organisation and basic statistics, enabling batch logging without external equipment. Optional MODBUS RTU and a dedicated measuring hub allow synchronisation of multiple instruments and connection to Industry 4.0 systems, which supports automated data capture and reduces transcription errors in production environments. Robust mechanical design for long‑range measurement Engineered as a long‑range gauge, the frame is CNC machined from a solid aluminium block to provide stiffness across the full span up to 1,200 mm, while large Ø50 mm measuring faces ensure stable contact and repeatability on heavy workpieces. The instrument's mass (approx. 9.2 kg) and construction favour reproducible results over long distances; ergonomic handling and fixture options are recommended for routine use with large components. This construction balances rigidity and handling to keep measurement uncertainty low in demanding shopfloor conditions. Contact Metav Werkzeuge in Emmerich for tailored advice and to arrange supply of the Microtech Metrology long‑range digital outside micrometer calibrated to ISO 17025 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 110181208 GTIN: 4061905039706 Manufacturer: Microtech Metrology Calibration: ISO 17025 certificate included Data output: Wireless+USB Specifications Measuring range: 1000–1200 mm Measuring faces: Ø50 mm Resolution (display): 0.0001 mm Accuracy: 0.014 mm Weight: 9.2 kg Memory capacity: 2000 values Features Colour 1.5" touchscreen display Wireless MICROTECH instrument connection and synchronization Data modes: WIRELESS HID, WIRELESS HID+MAC, USB HID Optional MODBUS RTU (RS‑485) for industrial integration CNC machined aluminium housing Onboard functions: Graphing, Go/NoGo, Max/Min, formulas, temperature compensation Calibration certificate (ISO 17025, Ilac MRA) FAQ Is the instrument delivered calibrated? Yes. The Microtech Metrology digital long‑range outside micrometer is supplied with an ISO 17025 calibration certificate that accompanies the device for traceability and quality documentation. Which interfaces are available for data capture? The micrometer supports wireless transfer and USB HID modes; it can also connect to MICROTECH hubs and offers optional MODBUS RTU for industrial systems — see SKU 110181208 for configuration options. What measurement range and contact face size does it cover? The gauge measures from 1000 to 1200 mm and uses large Ø50 mm measuring faces, making it suitable for long‑span inspections classified as long‑range instruments. What resolution and accuracy should be expected in routine measurement? Expect a display resolution of 0.0001 mm and an accuracy figure of approximately ±0.014 mm, suitable for demanding production checks on large assemblies. Is the instrument suitable for automated data logging in production? Yes. With 2,000 value memory, folder organisation, wireless transfer and optional MODBUS, the device supports automated data capture and integration into production monitoring systems. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000-1500mm Micrometer With Modular Electronics, Colour Touchscreen, IP65, ISO17025 Calibrated - Microtech Metrology
Take advantage of the combination of modular construction, a 1,000–1,500 mm measuring range and ISO 17025 calibration for precise, reproducible inspections of large components; order the micrometer directly via Metav Werkzeuge or consult our specialists for integration advice. Wide‑Range Modular Outside Micrometer (Microtech Metrology) — modular digital micrometer with wireless and USB data transfer The Wide‑Range Modular Outside Micrometer is a modular measuring instrument designed for large‑format dimensional inspection in toolrooms, jig and fixture workshops and quality laboratories. Modular aluminium housing for easy transport Measuring range 1,000–1,500 mm IP65 protection for workshop use ISO 17025 calibration certificate included High precision over long measuring spans The modular design delivers consistent repeatability across a long measuring span, combining a measuring range of 1,000–1,500 mm with a verified accuracy of 0.028 mm and a fine readout step of 0.0001 mm. This places the instrument in the long category for calipers and micrometers, where stiffness and stability are crucial; the robust construction and large Ø50 mm measuring faces reduce bending and ensure reproducible results on shafts, housings and large assemblies. Included ISO 17025 calibration and the accompanying calibration certificate substantiate traceability and shorten internal validation procedures, helping to maintain audit‑ready measurement records. Efficient data handling and Industry 4.0 compatibility Measurement workflows are accelerated by integrated digital functions: wireless and USB data transfer, HID modes and a built‑in memory manager that stores 2000 values in a folder structure for rapid retrieval. The instrument supports synchronized connections to Microtech instruments and offers graphical output, statistics and time‑stamped records for trend analysis. Optional MODBUS RTU output enables direct integration into PLCs and industrial data networks, while the modular electronics and MICS system facilitate Industry 4.0 scenarios where continuous data flow and automated logging reduce manual transcription errors and inspection cycle times. Rugged build for the workshop and mobile inspection teams Machined from solid aluminium, the housing combines protective robustness with manageable weight and modular portability; the micrometer arrives as a two‑module assembly that simplifies transport and on‑site configuration. An IP65 rating protects internal electronics from dust and spray, making the instrument suitable for demanding shopfloor environments. The large measuring anvils (Ø50 mm) and sturdy frame are designed to withstand routine handling while maintaining the alignment required for long‑range measurements. Together, these features cut downtime and lower the risk of measurement variation during production checks. For tailored advice on adapting this Microtech long‑range modular micrometer to existing inspection systems, or to secure delivery from Metav Werkzeuge in Emmerich, contact our technicians at Metav Werkzeuge for precise consultation and fast processing. Technical data Article number: 110160155 GTIN: 4061905040061 Manufacturer: Microtech Metrology Measuring range: 1,000–1,500 mm Display: digital colour touchscreen Data output: Wireless + USB Protection class: IP 65 Measuring faces: Ø50 mm Modules: 2 Memory capacity: 2000 values Calibration: ISO 17025 certificate included Facts Accuracy: 0.028 mm Resolution / Readout: 0.0001 mm Weight: 18 kg ECLASS: 21170328 ETIM: EC003590 Special features Modular construction for transport and assembly CNC machined aluminium housing Industry 4.0 MICS microcomputer functions Wireless Microtech instrument synchronization USB HID data modes Optional MODBUS RTU for industrial integration IP65 workshop protection FAQ Is the instrument delivered calibrated? Yes. The Wide‑Range Modular Outside Micrometer from Microtech Metrology is supplied with an ISO 17025 calibration certificate included. What data interfaces are available for automated logging? The unit supports wireless transfer and USB HID modes, plus optional MODBUS RTU for direct PLC integration, enabling automated capture of measurement data. What measuring range and accuracy can be expected? The micrometer covers 1,000–1,500 mm with an accuracy of 0.028 mm and a readout step of 0.0001 mm, suitable for large assemblies and production checks. Is the micrometer robust enough for shopfloor use? Yes. The machined aluminium housing and IP65 protection make it suitable for workshop conditions while preserving measurement stability. Can stored measurement sets be reviewed or transferred? Stored values (up to 2000 values) are organised in folders and can be exported via the supported data interfaces for further analysis. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000-2000mm Gauge Anvil for Large Bore Micrometers, Accessory - Metav IndustryLine
Take advantage of the combination of precise large-range support, simple handling and clear compatibility with models 304.040–304.044 for reproducible measurements in demanding production environments. Order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. Measuring anvil M304.040.1 — Anvil for large-range micrometres (1,000–2,000 mm) The Measuring anvil M304.040.1 is an accessory engineered to provide a stable contact surface for micrometres and long-range calipers, simplifying accurate external measurements on large components. Compatible with large-range micrometres Designed for 1,000–2,000 mm measuring ranges Lightweight 1 kg for easy handling Stability across long measuring spans A dedicated measuring anvil reduces local deformation and gives a repeatable reference when measuring substantial components. Classified for the Long category (1,000–2,000 mm), this accessory is intended to complement long-beam measuring setups and large-range micrometres where profile stiffness and support points determine the quality of the result. The design focuses on limiting contact-induced errors so measured values remain consistent across repeated operations. Clear compatibility and workshop benefits The anvil is specified for use with models 304.040–304.044, ensuring straightforward integration into existing metrology equipment lines. As an add-on it provides a defined datum for external measurements, helping to shorten setup times and reduce operator-dependent variance. Compatibility with established device ranges simplifies procurement and inventory management while contributing to better throughput in routine inspection tasks. Practical handling for production use At a weight of 1 kg, the accessory is easy to manoeuvre and install without compromising the solidity required for precise readings. The compact form assists in positioning on large workpieces or within fixtures, supporting a consistent contact point that benefits both shop-floor checks and more formal inspection routines. Supplied as a purpose-built accessory, it helps standardise measurement procedures for large components across departments. For reliable large-range measurement support from the Metav IndustryLine, order the measuring anvil M304.040.1 via Metav Werkzeuge or contact our consultants in Emmerich for technical guidance: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: M304.040.1 GTIN: 4054469116006 Weight: 1 kg Tariff number: 90173000 ECLASS: 21043590 Facts Suitable for measuring range: 1,000–2,000 mm Category: Measuring devices > Accessories Label: Measuring anvil for micrometres from 1,000 mm Asset file: m3040401-main.jpg Special features Accessory for models 304.040–304.044 Intended as stable contact point for large external measurements Compact, workshop-friendly format FAQ Which measuring devices is this anvil compatible with? The measuring anvil M304.040.1 is designed for use with large-range micrometres and long-beam calipers, specifically referenced for models 304.040–304.044 and suitable for the 1,000–2,000 mm range. How does the anvil improve measurement quality? By providing a defined and stable contact surface, the anvil reduces local deformation and operator variance, improving repeatability for external measurements on large components. What are the key identifiers for ordering and stock? Order using SKU M304.040.1; GTIN 4054469116006; the item is listed under measuring devices accessories. Is the accessory suitable for regular shop-floor inspection tasks? Yes. The compact, lightweight format and clear compatibility make it suitable for routine shop-floor checks and integration into production measurement workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com