High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
5MP HD-Lite Digital Camera 1080p Colour, 24-Bit Colour Depth, HDMI USB-2, SD Card, 0.45x Lens - Euromex
Take advantage of high‑resolution imaging, flexible connectivity and bundled recording software for efficient inspection and documentation; order the camera directly via Metav Werkzeuge or ask the consultants for tailored advice. Euromex HD‑Lite camera VC.3031 — 5.0 MP digital microscope camera with HDMI and USB‑2 outputs The HD‑Lite camera VC.3031 is a compact digital microscope camera designed for high‑definition imaging and flexible operation in standalone setups or integrated PC workflows. 5.0 MP high-resolution sensor HDMI and USB‑2 video outputs 24‑bit colour depth for true colour Standalone or PC operation, incl. ImageFocus Plus Sharp, true‑colour imaging for reliable inspection The unit delivers a 5.0 MP sensor that captures detailed images while the 24‑bit colour processing reproduces specimens and samples with accurate tonal gradation. High‑speed 1080p capture enables smooth live viewing and recording for quality control and documentation tasks, reducing rework and accelerating decision cycles. This combination of resolution and colour fidelity supports precise measurements and visual inspections even for users with limited microscopy experience, since the imaging performance translates directly into clearer evidence and faster evaluations. Flexible connectivity for seamless workflow integration Equipped with HDMI and USB‑2 outputs, the device integrates readily into existing inspection stations, monitors and laboratory PCs. The inclusion of a standard SD card slot and the supplied ImageFocus Plus recording software allows image capture in standalone mode or direct transfer to a computer for analysis and archiving. An included 0.45x objective broadens the field of view for routine inspections and documentation, cutting the time needed to capture overview images while maintaining sufficient detail for further evaluation. Practical design for laboratories, education and production Built for continuous use in teaching, routine laboratory work and shop‑floor quality control, the camera offers straightforward operation and quick setup. The combination of standalone functionality and PC connectivity reduces setup complexity and the need for additional hardware, supporting efficient throughput in busy environments. The supplied software simplifies image capture and basic measurements, enabling consistent documentation practices and contributing to traceable workflows across teams and shifts. Contact Metav Werkzeuge today to discuss how the Euromex HD‑Lite camera VC.3031 can be integrated into inspection processes and to receive personalised technical guidance from the Metav specialists in Emmerich. Technical data Article number: VC.3031 SKU: VC.3031 Label: HD‑Lite Kamera, Farbe HD hochauflösend 5MP Hochgeschwindigkeits‑Kamera 1080p, 24 bit Farbtiefe, Standard SD card, HDMI und USB‑2 Ausgang mit integriert Aufnahmesoftware. verwendbar in Standalone‑Betrieb oder mit a Computer und geliefert mit ImageFocus Plus software. geliefert mit 0.45x Objektiv Brand: Euromex Product type: Digitalkamera / Digitalmikroskop Facts Resolution: 5.0 MP Video capture: 1080p Colour depth: 24 bit Included optics: 0.45x objective Interfaces: HDMI; USB‑2 Special features Standalone operation or PC connection Standard SD card recording Supplied ImageFocus Plus recording software High‑speed camera functionality Delivered by Euromex FAQ What image resolution does the HD‑Lite camera provide? The Euromex HD‑Lite camera VC.3031 provides a 5.0 MP sensor capable of high‑definition stills and 1080p live video for clear documentation. Can the camera record without a computer? Yes, the unit supports standalone recording to a standard SD card and is supplied with ImageFocus Plus for onboard capture and playback. Which interfaces are available for live viewing or recording? The camera offers HDMI and USB‑2 outputs for direct monitor connection or integration with a computer workstation. Is imaging software included and what does it do? ImageFocus Plus is included; it enables recording, basic image management and export functions to support routine analysis and archiving. What is supplied with the camera for optical coverage? A 0.45x objective is supplied to increase the field of view for general inspection tasks while maintaining suitable image detail. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
5W LED Replacement Lamp For Incident Light, Spare Component - Euromex
Take advantage of a reliable replacement lamp that restores consistent illumination while keeping maintenance straightforward; the compact 5 W LED module ensures stable reflected-light performance and reduces inspection downtime. Order directly via Metav Werkzeuge or consult our specialists for compatibility guidance. BS.9986-R — Replacement 5 W LED module for reflected-light illumination (Euromex accessory) The BS.9986-R is a replacement 5 W LED module designed for use with Euromex BS.4xxxx reflected-light illumination units, providing stable, low-maintenance lighting for microscopy inspection tasks. Efficient 5 W high-output LED Compatible with BS.4xxxx reflected-light units Simple plug-in replacement module Stable, long-life illumination performance Consistent reflected-light illumination for reliable inspection results A compact 5 W LED module restores uniform light output for reflected-light microscopy, helping to maintain reproducible image conditions during inspection or documentation. The module replaces the original lamp in the BS.4xxxx series and is specified as an accessory/component for illumination units, ensuring compatibility with the intended series. By using a dedicated replacement lamp rather than improvised solutions, optical contrast and measurement repeatability remain stable, which supports quality assurance processes in laboratories and production control. Fast, low-effort replacement that reduces downtime The module is designed as a plug-in replacement, enabling straightforward swap-out without lengthy disassembly. The straightforward installation minimises machine downtime and lowers service costs. Modern LED technology offers improved energy efficiency and a stable, long-life performance compared with older filament or halogen sources, translating into fewer replacements and more predictable maintenance cycles. For practical operations this means fewer interruptions to inspection routines and a quicker return to full productivity. Designed for microscopy applications and supported supply chain Suited to laboratories, educational institutions and industrial inspection benches, the module brings dependable illumination to reflected-light setups where accurate surface observation is required. The part is an accessory intended to preserve the original optical characteristics of the illumination system, allowing continued use of existing objectives and cameras without recalibration for light source inconsistency. If clarification on fitment or additional technical data is required, technical assistance is available at info@metav-werkzeuge.com or by phone at +49 2822 7131930, ensuring informed procurement and application decisions. For specification advice or to procure the original Euromex replacement LED module, contact Metav Werkzeuge for personalised guidance and supply from Emmerich. Technical data Article number: BS.9986-R Description: Replacement 5 W LED for BS.4xxxx reflected-light illumination Product type: Accessory / Component Manufacturer: Euromex Facts Power: 5 W Special features Replacement module for reflected-light illumination Plug-in compatibility with BS.4xxxx series Intended for microscopy inspection and documentation FAQ What power rating does the lamp have? The replacement lamp is specified as a 5 W LED module for reflected-light illumination and is identified as BS.9986-R. Is the module compatible with the BS.4xxxx series? Yes, the BS.9986-R is designed as a replacement for Euromex BS.4xxxx reflected-light illumination units to restore consistent lighting. How difficult is the replacement procedure? Replacement is intended as a straightforward plug-in swap; the module is supplied as an accessory/component for direct installation into the illumination housing. Will the module affect camera or objective performance? The module maintains stable illumination characteristics so that existing camera exposure and objective performance remain consistent, avoiding unnecessary recalibration. Is this an original Euromex part? The SKU BS.9986-R is listed as an accessory for Euromex illumination units and is intended to match the original specification for the BS.4xxxx series. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
5x 20x DIC Prism for Delphi-X Inverso Contrast Enhancement - Euromex
Take advantage of precise differential interference contrast for low‑magnification inspections together with full compatibility with the Delphi‑X Inverso series; the accessory supports both 5× and 20× objectives for reliable materials‑science imaging. Order this component directly via Metav Werkzeuge or contact the consultants for tailored advice. DIC prism DI.9691-52 — Accessory for Delphi‑X Inverso, suited to 5× and 20× objectives (Euromex) A DIC prism DI.9691-52 designed for materials‑science applications on the Delphi‑X Inverso inverted microscope, delivering differential interference contrast at low magnifications. DIC prism for Delphi‑X Inverso Designed for materials science use Suitable for 5× and 20× objectives Accessory for inverted Delphi‑X series Improved contrast for coarse structural inspection The DIC element enhances edge definition and surface relief when inspecting metallographic samples and structured specimens at lower magnifications. By converting phase gradients into intensity differences, the prism produces clearer visual separation of features that would otherwise be hard to distinguish under standard brightfield illumination. The resulting images support faster, more reliable qualitative assessments during incoming inspection and routine materials analysis, reducing the need for repeated sample preparation. Seamless compatibility with inverted systems and optical workflow Engineered for use with the Delphi‑X Inverso range, the prism integrates into the optical path without altering the core illumination geometry of the inverted microscope. Installation is straightforward and preserves existing alignment of condensers and objectives; the component is intended to work with the specified 5× and 20× objective magnifications to deliver optimal interference effects. This compatibility keeps instrument setup times short and maintains laboratory throughput while ensuring consistent imaging performance across batches. Practical benefits for materials‑science laboratories For laboratories focusing on metallography, failure analysis or sample characterisation, this DIC accessory brings a pragmatic balance of performance and simplicity. The prism accentuates fine surface topography and microstructural contrasts, aiding visual defect recognition and documentation. As part of a standardised inspection routine, it reduces subjective interpretation by offering repeatable optical enhancement, supporting traceable results in reports and quality records. Clear handling, maintenance and usage considerations The accessory is intended as a supplement to existing optics rather than a replacement for specialised high‑magnification DIC objectives; it is optimised for the specified low magnifications. Routine cleaning with appropriate optical solvents and lint‑free tissues preserves the optical surfaces and performance. For clarification on mechanical fit or to confirm compatibility with an individual system configuration, technical documentation and support are available on request via the contact channels below. Contact Metav Werkzeuge for tailored compatibility checks and to secure the DI.9691-52 DIC prism for Delphi‑X Inverso, ensuring reliable contrast enhancement for materials‑science inspections Technical data Article number: DI.9691-52 Label: DIC prism for Delphi‑X Inverso — materials science Facts Compatible objective magnifications: 5×, 20× Special features DIC prism Compatible with Delphi‑X Inverso Accessory / component Application: materials science FAQ What magnifications does the prism support? The prism is specified for use with 5× and 20× objectives to produce differential interference contrast suited to low‑magnification materials inspections. Is the component compatible with the Delphi‑X Inverso series? Yes, the DI.9691-52 prism is designed for integration with the Delphi‑X Inverso inverted microscope series and aligns with its optical path requirements. Can the prism be used for routine metallographic inspection? The accessory improves surface relief and edge contrast for metallographic samples and is intended to support routine materials‑science assessments. Does the prism replace high‑magnification DIC objectives? No, the prism supplements existing optics for enhanced low‑magnification contrast and is not a substitute for dedicated high‑magnification DIC objectives. Where can I obtain further technical specifications or fitting instructions? Detailed documentation and fitting advice are available from Metav Werkzeuge and from Euromex; project‑specific compatibility checks can be arranged on request. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
5x Infinity-Corrected Plan Objective 0.12 NA 26.1mm Working Distance No Cover Glass Correction - Euromex
The combination of 5× magnification, NA 0.12 and a 26.1 mm working distance delivers reliable brightfield inspection for materials-science applications; ideal where flat-field imaging and sample access matter. Order the Plan PLMi 5x/0.12 directly via Metav Werkzeuge or ask our consultants if needed. Plan PLMi 5x/0.12 — Euromex bScope brightfield objective, infinity-corrected, 26.1 mm working distance Plan PLMi 5x/0.12 is an infinity-corrected brightfield objective designed for materials science inspection on the bScope series, offering a long working distance and no cover‑glass correction Infinity-corrected Plan optics 5× magnification Numerical aperture 0.12 26.1 mm working distance Flatter images and reliable measurement results for materials inspection The infinity-corrected Plan design produces a flat field across the image, reducing peripheral distortion that can affect quantitative evaluation. For materials science and industrial inspection, this optical approach yields images that are more consistent when comparing different sample regions, which supports reproducible defect detection and dimensional checks. The lens’s construction prioritises even illumination and controlled aberration, so measurements and visual assessments remain trustworthy under brightfield conditions. Practical benefits for handling and imaging unmounted samples With 5× magnification and an NA 0.12, the objective delivers a balance between resolving power and depth of field, useful when surface topography and broad-area inspection are required. The 26.1 mm working distance allows comfortable clearance for fixtures, probes or mechanical manipulation without compromising image quality. As the optics are specified without cover‑glass correction, the objective is particularly appropriate for uncovered metallographic and materials samples where a cover slip is absent, preventing correction-induced artefacts. Easy integration into bScope setups and instrument flexibility The objective’s IOS (infinity-corrected) specification means it integrates with standard tube lenses and modern microscope stands, allowing flexible system configuration in inspection stations. The Plan optical character and the materials‑science orientation make it a pragmatic choice for retrofits or new builds based on the bScope platform. For laboratories requiring consistent brightfield performance across multiple objectives, this lens supports modular optical chains while keeping alignment and calibration straightforward. For tailored integration advice or to secure supply of the Euromex Plan PLMi 5x/0.12 for bScope applications, contact Metav Werkzeuge — our Emmerich-based specialists will advise on compatibility and delivery arrangements. Technical data Article number: BS.8105 Label: Plan PLMi 5x/0.12 infinity‑corrected IOS objective for brightfield for bScope materials science; working distance 26.1 mm; without cover‑glass correction Brand: Euromex Type: Objective / lens Model series: bScope Facts Magnification: 5× Numerical aperture: 0.12 Working distance: 26.1 mm Special features Infinity‑corrected (IOS) design Plan optical correction For brightfield illumination Intended for materials science applications No cover‑glass correction FAQ Is this objective suitable for metallographic inspection? The Euromex Plan PLMi 5x/0.12 is specified for brightfield materials‑science work and, being without cover‑glass correction, is well suited to metallographic samples that are examined without a cover slip. How much working clearance does the lens provide for fixtures? The objective offers a 26.1 mm working distance, which accommodates most small fixtures, probes and surface manipulators used in materials inspection. What resolution and depth of field can be expected at 5×? With 5× magnification and NA 0.12, the lens balances resolving power and depth of field, delivering clear surface detail while maintaining sufficient focus range for uneven samples; this makes it practical for both visual inspection and coarse measurement tasks. Will the objective fit existing bScope systems? The infinity‑corrected (IOS) design and the bScope orientation ensure compatibility with standard tube lenses and bScope stands; specify SKU BS.8105 when confirming mechanical and optical fit. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
5x Plan Objective 0.12 NA Brightfield/Darkfield Long WD 20mm Parfocal 45mm M26 - Euromex
Take advantage of 5x magnification, a 0.12 numerical aperture and a 20 mm working distance for reliable imaging of larger specimens; order directly via Metav Werkzeuge or contact our consultants for compatibility advice. Plan PLMi 5x/0.12 IOS Objective — Euromex brightfield/darkfield lens with long 20 mm working distance and M26 thread Plan PLMi 5x/0.12 IOS Objective is a precision microscopy objective designed for brightfield and darkfield observation, offering a long working distance for bulky or uneven samples Plan optical design for flat field 5x magnification, NA 0.12 Long 20 mm working distance Compatible with M26 thread Accurate, flat-field imaging for reproducible results The Plan optical design delivers a consistently flat field across the image plane, reducing edge distortion that can complicate measurement and documentation. With 5x magnification and a 0.12 numerical aperture, this objective balances depth of field and resolution, making it suitable for metrology tasks where surface detail and overall context are both important. The objective is specified for brightfield/darkfield illumination modes, enabling contrast enhancement of fine structures without additional complex optics. These characteristics support reliable, repeatable captures that speed up inspection workflows and minimise rework. Generous working distance for larger or uneven samples A 20 mm working distance provides practical clearance between the objective and the specimen, allowing inspection of components with fixtures, small assemblies, or slightly raised features. This extended gap helps prevent accidental contact with the lens and makes handling and fixturing simpler in routine inspection. The absence of cover-glass correction means the lens is optimised for direct observation of specimens without a standard cover slip; this should be considered when planning sample preparation. The long working distance thus reduces handling risk and increases throughput for batch inspections. Easy integration with standard microscope systems The objective uses an M26 thread and a 45 mm parfocal reference, enabling straightforward mounting and parfocal alignment in compatible microscope turrets and nosepieces. Parfocal compatibility ensures that once the objective is focused, switching to similar parfocal optics requires minimal refocusing, saving operator time during multi-magnification inspections. The objective’s IOS designation signals suitability for integrated optical systems where consistent mechanical and optical interfaces are required, simplifying retrofits and system builds without bespoke adaptors. Practical advantages for shop floor and laboratory use The combination of Plan correction, mid-range magnification and an extended working distance makes this lens particularly useful for production control and quality assurance tasks. Its optical specification supports clear observation of surface defects, coatings, and component geometry without excessive setup complexity. The lens is therefore well suited to inspection benches and educational or research microscopes where a robust, general-purpose objective is required. Equipment planners benefit from reduced need for specimen modification and from the objective’s straightforward mechanical compatibility. Contact Metav Werkzeuge for tailored advice on system compatibility and procurement for precise microscopy solutions from Emmerich. Technical data SKU: AI.8105 Product type: Objective / Lens Label: Plan PLMi 5x/0.12 brightfield/darkfield IOS objective, long working distance 20 mm, without cover glass correction (45 mm parfocal, M26) Facts Magnification: 5× Numerical aperture: 0.12 Working distance: 20 mm Parfocal length: 45 mm Mount thread: M26 Special features Plan optical design Brightfield and darkfield capability No cover glass correction Long working distance for bulky specimens FAQ What is the primary application for this objective? The objective is intended for general inspection and documentation tasks where a flat field and extended working distance aid observation; the Euromex Plan PLMi 5x/0.12 IOS objective (SKU AI.8105) suits production control and laboratory inspection. Can this objective be used with cover slips? This lens is supplied without cover glass correction, so imaging through a standard cover slip may require verification; the Euromex objective performs optimally when specimens are observed without a cover glass. How does the parfocal specification help during inspections? A 45 mm parfocal reference allows quick switching between compatible objectives with minimal refocus, improving workflow efficiency when using the same optical system for multiple magnifications. Is the working distance sufficient for fixtured parts? The 20 mm working distance provides significant clearance for small fixtures and raised components, reducing the chance of contact and easing handling during inspection. What mounting is required for the objective? The objective fits microscopes and adapters that accept an M26 thread; confirm turret or nosepiece compatibility before installation. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
5x Plan PLMi Infinity-Corrected IOS Objective 0.12 NA 9.7mm Working Distance Brightfield/Darkfield - Euromex
High-fidelity imaging together with a practical working distance and infinity-corrected optics makes this objective an excellent choice for material inspection and metallographic workflows — order directly via Metav Werkzeuge or consult our specialists for application advice. Euromex Plan PLMi 5x/0.12 — Infinity-corrected Plan objective for brightfield & darkfield (WD 9.7 mm) The Plan PLMi 5x/0.12 is an infinity-corrected microscope objective designed for metallography and material science, optimised for both brightfield and darkfield contrast techniques Plan-corrected optics for flat field imaging Numerical aperture 0.12 for balanced resolution Working distance 9.7 mm for larger samples Compatible with brightfield and darkfield Consistent, flat-field images for reliable measurements The Plan correction ensures a flat field across the image circle, which reduces peripheral distortion and delivers uniform sharpness for photographic documentation and dimensional inspection. With an infinity-corrected optical design, this objective integrates into modern microscope systems with tube lenses, allowing stable imaging chains and repeatable results. The optical assembly supports routine laboratory measurements where edge-to-edge clarity contributes directly to faster quality assurance and fewer retakes. Practical working distance and handling benefits for material workflows A working distance of 9.7 mm provides sufficient clearance for uneven or prepared metallographic specimens and for the use of lighting accessories required in brightfield and darkfield techniques. The absence of cover glass correction means the lens is optimised for direct examination of polished or etched samples rather than mounted slides with coverslips, simplifying sample preparation in industrial labs. This configuration reduces handling steps and keeps throughput high in inspection and research environments. Balanced optical performance: contrast, resolution and depth of field With a numerical aperture (NA) of 0.12, the lens offers a sensible compromise between lateral resolution and depth of field, making it well suited to coarse topography and structural contrast in metals and composites. A moderate NA improves depth perception for surface features while maintaining sufficient resolving power for microstructural assessment. The optic’s performance supports reliable image-based evaluations and documentation without demanding specialist high-NA illumination systems. Tailored for metallography and quality control applications Designed for material science and metallographic use, the objective performs consistently in both brightfield and darkfield modes, highlighting surface defects, grain boundaries and inclusions. The robust optical design supports inspection routines, failure analysis and sample documentation where reproducibility is essential. The item is supplied as an optical objective suitable for integration into existing microscope stands and imaging setups; for identification reference see SKU BS.8805. Contact Metav Werkzeuge in Emmerich for tailored advice on the Euromex Plan PLMi 5x/0.12, technical compatibility checks or to place an order—telephone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: BS.8805 Model designation: Plan PLMi 5x/0.12 Product: Objective / lens Manufacturer: Euromex Facts Magnification: 5x Numerical aperture (NA): 0.12 Working distance: 9.7 mm Infinity-corrected: yes Special features Plan correction (flat field) IOS-corrected Brightfield and darkfield compatible No cover glass correction Intended for material science / metallography FAQ Is this objective suitable for metallographic inspection? The Plan PLMi 5x/0.12 is optimised for metallography and material science, offering flat-field imaging and a working distance appropriate for polished and etched specimens. Can the objective be used for brightfield and darkfield techniques? Yes, the optical design supports both brightfield and darkfield contrast methods for enhanced surface and structural visualisation. Does the lens include cover glass correction for slide work? No, this objective does not include cover glass correction and is therefore intended primarily for direct examination of prepared material samples rather than coverslipped biological slides. Which microscopes are the objective compatible with? The infinity-corrected design is compatible with microscope systems that accept infinity objectives and use a tube lens; compatibility checks are recommended for specific stands. What is the product reference for ordering and documentation? Order and document using the SKU BS.8805 for the Euromex Plan PLMi 5x/0.12. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
5x Plan Semi-Apochromatic Objective 0.15 NA 20mm Working Distance 45mm Parfocal M26 Mount - Euromex
Take advantage of the optical precision, extended working distance and parfocal compatibility to speed up routine inspections and reduce adjustment time; order the lens directly via Metav Werkzeuge or consult with our technical advisors for specification matching. PL-SAMi 5x/0.15 Plan Semi-Apochromatic Objective — 20 mm working distance, M26 mount (Euromex) The PL-SAMi 5x/0.15 objective is a plan semi-apochromatic microscope lens engineered for long-working-distance inspection and stable parfocal performance in industrial and laboratory imaging 5× magnification, NA 0.15 20 mm long working distance 45 mm parfocal spacing M26 thread mount, no cover glass correction Consistent flat-field imaging for demanding inspections The plan semi-apochromatic design delivers a broadly corrected image with a flat field across the visual area, which reduces field curvature and chromatic artefacts compared with simple achromats. For routine quality checks and documentary imaging, this optical correction means fewer focus adjustments and more reliable image reproduction. The moderate numerical aperture (NA 0.15) balances resolution and depth of field, making the lens well suited to samples that require clear detail without the shallow focus of high-NA optics. Longer working distance and parfocal workflow for greater efficiency A generous 20 mm working distance creates practical clearance between the objective and the specimen, facilitating handling, fixturing and illumination without risk of collision. The 45 mm parfocal spacing ensures that the lens maintains focus when rotating through typical objective turrets or when changing magnifications within a parfocal set, which reduces downtime and keeps inspection cycles short. These mechanical and optical attributes translate into faster throughput in production or inspection routines. Precise mounting and performance parameters explained The M26 mounting thread provides a compact, mechanically stable connection compatible with many inspection and microscope stand configurations. The 5× magnification in combination with the NA 0.15 determines the balance of image scale, resolution and depth of field; higher NA improves resolving power but narrows focus, whereas this configuration offers a compromise for versatile use. Note that the lens is supplied without cover-glass correction, indicating it is optimised for specimens viewed without a standard cover slip or for systems where correction is applied elsewhere in the imaging train. The product designation includes IOS BD and is supplied by Euromex for precision optical applications. For reliable optical performance from Euromex and specification support, contact Metav Werkzeuge to discuss compatibility and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: DI.8105 Product designation: Plansemiapochromatisch PL-SAMi 5x/0.15 IOS BD objective, 20 mm working distance, no cover-glass correction, 45 mm parfocal, M26 mount Manufacturer: Euromex Product type: Objective / Lens Facts Magnification: 5× Numerical aperture: 0.15 Working distance: 20 mm Parfocal distance: 45 mm Mount thread: M26 Special features Plan semi-apochromatic optical correction No cover-glass correction IOS BD designation Parfocal 45 mm M26 mounting thread FAQ What applications suit this objective best? The PL-SAMi 5x/0.15 objective from Euromex is suited to routine inspection, documentation and tasks where a flat field and a long working distance are advantageous. Can this objective be used with a cover slip? The lens is supplied without cover-glass correction; for optimal results with a cover slip, compensation elsewhere in the optical path or a cover-glass-corrected objective is recommended. How does the numerical aperture affect image quality? A numerical aperture of 0.15 governs resolution and depth of field; the PL-SAMi 5x/0.15 objective offers a balance between resolving detail and maintaining usable depth for inspection tasks. Is the M26 thread compatible with standard microscope turrets? M26 is a compact mounting specification; compatibility depends on the microscope or stand adaptor, so the mechanical interface should be checked before installation. What does parfocal 45 mm mean in practice? Parfocal 45 mm indicates the objective is designed to remain in focus when used within a turret or system set for that parfocal distance, reducing the need for refocusing between objectives. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
5x Plan Stress-Free PLPOLi 0.12 NA Objective 15.5mm Working Distance, Polarised - Euromex
Take advantage of the objective's combination of reliable polarisation contrast and a generous working distance for straightforward sample handling and reproducible imaging; order via Metav Werkzeuge or consult the team for application advice. IS.7905-T – Euromex iScope 5× Polarising Transmitted-Light Objective (NA 0.12, 15.5 mm WD) The IS.7905-T is a transmitted-light objective for iScope microscopes, optimised for polarisation imaging with a 5× magnification and a 15.5 mm working distance. Plan, stress-free design for even imaging Polarising function for enhanced contrast 5× magnification with NA 0.12 15.5 mm working distance for thicker samples Consistent polarisation contrast for transmitted-light inspection The plan, stress-free optical design ensures a flat field and avoids internal stress that can introduce unwanted birefringence; this delivers uniform image quality across the field and reliable polarisation contrast. The combination of 5× magnification and NA 0.12 makes this objective suited to routine polarising inspections where clear orientation and contrast of anisotropic structures are required. Precision in the optics reduces interpretation errors and supports faster, evidence-based decisions in production control or research. Easier handling of delicate or thicker samples during inspection A 15.5 mm working distance provides a comfortable clearance between the objective and the specimen, allowing easier manipulation of thicker or unmounted samples. Because the lens is supplied without cover-glass correction, it is particularly suitable for direct-sample transmitted-light polarisation work where a coverslip is not used. This reduces preparation steps and the risk of disturbing fragile specimens, enabling more efficient throughput in quality checks and educational demonstrations while maintaining clear polarisation contrast. Seamless integration into iScope workflows and dependable construction Engineered for the iScope series, the lens fits standard transmitted-light polarising setups and supports consistent results across comparable systems. The robust manufacturing and defined optical parameters make the objective a predictable component in inspection chains and teaching environments. When reproducibility and documented imaging are priorities, the objective’s measured performance simplifies procedure standardisation and helps maintain calibration integrity over repeated use. Discuss the Euromex iScope IS.7905-T with Metav Werkzeuge to confirm fitment for specific applications and to benefit from practical advice and supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: IS.7905-T Manufacturer: Euromex Product type: Objective / lens Model series: iScope Core specifications Magnification: 5× Numerical aperture: 0.12 Working distance: 15.5 mm Special features Plan stress-free design Polarising transmitted-light function No cover-glass correction FAQ What applications is this objective suited for? The IS.7905-T objective is designed for transmitted-light polarisation imaging and is well suited to materials inspection, geological thin sections without a coverslip, and educational polarising demonstrations. Can the objective be used with a coverslip? This objective is supplied without cover-glass correction; while a coverslip can be used in some setups, optimal optical performance for the IS.7905-T is achieved on specimens without a coverslip. How does the working distance affect sample handling? A 15.5 mm working distance gives more space between the lens and specimen, simplifying handling of thicker or delicate samples and reducing the risk of contact during setup. Is the IS.7905-T compatible with all iScope transmitted-light stages? The IS.7905-T is made for the iScope series and is compatible with standard transmitted-light polarising assemblies within that system range. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
6 MP HD Ultra Camera 1080p High-Speed 36-Bit Colour, HDMI/USB-2 Output - Euromex
Benefit from high-speed, high-resolution imaging combined with straightforward system integration: the camera’s 6.0 MP Sony sensor and 36‑bit colour depth deliver precise, repeatable inspection results, while HDMI and USB‑2 outputs plus onboard recording simplify documentation. Order the device directly via Metav Werkzeuge or consult Metav’s specialists for application support. HD‑Ultra camera VC.3036 — Digital camera / digital microscope with 6 MP Sony sensor & HDMI A compact high‑speed HD‑Ultra camera designed for microscopy, inspection and documentation tasks; usable in standalone mode with SD card or connected to a PC for live capture and analysis 6.0 MP Sony sensor for detailed imaging HDMI and USB‑2 outputs for easy integration Integrated ImageFocus Plus recording software Supplied with 0.37x objective lens Capture finer detail at production pace The imaging system is built around a 1/2.8 inch 6 MP Sony sensor with 36‑bit colour depth and high‑speed 1080p capture, which together enable reliable detection of small defects and subtle colour differences. Such measurable improvements in image fidelity reduce inspection time and rework rates in quality control processes. The combination of a high pixel count and robust colour representation supports both visual evaluation and automated image analysis workflows, improving throughput without sacrificing accuracy. Plug‑and‑play connectivity to speed up commissioning Engineered for rapid integration, the unit provides HDMI and USB‑2 outputs and can record directly to a standard SD card or operate with a computer via the supplied ImageFocus Plus software. This flexibility shortens commissioning and changeover times on the production floor: the system can function as a standalone recorder for straightforward documentation or form part of a microscope or inspection station when connected to a PC. The included 0.37x objective broadens field‑of‑view options, reducing the need for additional optics in many standard applications. Streamlined documentation and reproducible results Integrated recording capability ensures consistent, timestamped image capture for traceability and audit routines. The onboard workflow supports frame‑accurate recording and immediate review, which helps to maintain a continuous documentation chain in laboratory and manufacturing contexts. Where traceability is required, the combination of high resolution and standard file export formats simplifies archiving and downstream analysis, enabling efficient validation of inspection outcomes and maintaining production records. Suitable for inspection, education and lab use The imaging device is appropriate for electronics inspection, material analysis and educational microscopy where a robust, easy‑to‑integrate camera is required. The system’s balance of sensor performance, colour fidelity and connectivity makes it a practical choice for routine quality assurance tasks as well as for documentation in development and training environments. Metav’s product selection and logistical support ensure reliable supply and consistent quality across the European market. For application advice, configuration options or ordering, contact Metav Werkzeuge — Metav’s consultants will advise on suitability and delivery from Emmerich; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: VC.3036 Product type: Digital camera / digital microscope Brand: Euromex Resolution: 6.0 megapixel Sensor size: 1/2.8 inch Colour depth: 36 bit Video mode: 1080p Included lens: 0.37x objective Outputs: HDMI, USB‑2 Recording software: ImageFocus Plus Operation modes: Standalone (SD card) or PC connection Sensor: 6 MP Sony sensor FAQ Which interfaces are available for live view and capture? The camera offers HDMI and USB‑2 outputs for live viewing and digital capture; both interfaces are supported by the unit and by the supplied ImageFocus Plus software. Can the device record without a computer? Yes. The unit supports standalone recording to a standard SD card and includes integrated recording functionality for direct documentation without a PC. What sensor and resolution does the system use? The system uses a 1/2.8 inch 6 MP Sony sensor delivering 6.0 megapixel stills and high‑speed 1080p video with 36‑bit colour depth. Is software included for image acquisition and analysis? ImageFocus Plus is supplied with the camera for acquisition, recording and basic analysis, enabling rapid setup of inspection and documentation routines. For which applications is the camera best suited? The device is aimed at microscopy, electronics inspection, laboratory documentation and educational use where high resolution, faithful colour reproduction and straightforward integration are required. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
6 V 30 W Halogen Replacement Lamp Halogen Transmitted Illumination, Compatible With GEML/GEMF - Euromex
Take advantage of reliable 6 V / 30 W illumination and direct compatibility with NexiusZoom stands to maintain uninterrupted inspection work. Order the replacement lamp directly via Metav Werkzeuge or consult our specialists for clarification. Halogen replacement lamp 6 V, 30 W for NexiusZoom GEML and GEMF — Euromex halogen spare bulb for transmitted illumination A Halogen replacement lamp 6 V, 30 W for NexiusZoom GEML and GEMF is designed to restore consistent halogen transmitted light for laboratory and workshop microscopes, ensuring stable contrast during transmitted-light examinations. 6 V, 30 W halogen performance Designed for NexiusZoom GEML/GEMF Halogen transmitted illumination Original-equivalent spare part SL.3678 Stable, high-contrast illumination for transmitted-light inspection Reliable optical inspection depends on consistent light quality. The 30 W halogen bulb delivers a steady luminous output that supports clear transmitted-light imaging and accurate visual assessment. With a rated supply of 6 V, the lamp integrates into the instrument's existing illumination circuit without modification, preserving the original colour rendering and contrast that technicians expect from their microscopes. This consistency reduces the need for repeated adjustments during delicate inspection tasks and contributes to reproducible results in routine quality control. Direct compatibility to minimise downtime and simplify replacement Compatibility with the NexiusZoom stands GEML and GEMF means the spare fits without adapters, allowing swift replacement and immediate return to service. The spare identified as SL.3678 matches the mechanical and electrical interface used by these NexiusZoom models, so workshops can maintain inspection capacity with minimal interruption. Where continuity of production is essential, a correctly specified replacement lamp avoids extended machine idle time and supports predictable maintenance planning. Practical benefits for workshop reliability and inventory planning Keeping a suitable halogen spare on the shelf is a pragmatic step towards uninterrupted operation. The replacement bulb provides the same functional characteristics as the original unit, enabling standardised lighting across devices and simplifying spare-part lists. Cross-references to related NexiusZoom SKUs are available for easy planning of compatible parts. For operations seeking straightforward, trustworthy components, this halogen spare supports a pragmatic maintenance strategy without requiring technical reconfiguration. Secure continuity of optical inspection with genuine Euromex 6 V / 30 W replacement lamps — contact Metav Werkzeuge for availability and specialist advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SL.3678 Product: Halogen replacement lamp Brand: Euromex Lighting: Halogen transmitted light Power: 30 W Supply voltage: 6 V Compatible stands: GEML, GEMF Cross-selling SKUs: NZ.1702-GEMF; NZ.1702-GEML; NZ.1703-GEMF; NZ.1703-GEML; NZ.1902-GEMF; NZ.1902-GEML; NZ.1903-GEMF; NZ.1903-GEML Facts Power: 30 W Voltage: 6 V Designs / Special features Halogen lamp for transmitted illumination Original-equivalent spare for NexiusZoom GEML and GEMF Manufacturer: Euromex FAQ Is this lamp compatible with both GEML and GEMF stands? Yes. The SL.3678 halogen replacement lamp is specified for use with NexiusZoom GEML and GEMF stands and matches their electrical and mechanical requirements. What are the electrical specifications of the spare bulb? The replacement bulb operates at 6 V with a power rating of 30 W, matching the original Euromex transmitted-light configuration. Can the lamp be used in other NexiusZoom models? Compatibility is confirmed for GEML and GEMF; other NexiusZoom models should be checked against the SL.3678 specification before installation. How does this halogen lamp affect image contrast during inspection? A correctly spec’d halogen bulb provides consistent colour rendering and steady luminous output, improving contrast and visual clarity for transmitted-light examinations with NexiusZoom systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.7–45× NexiusZoom Binocular Stereo Zoom Microscope 0.67–4.5× Zoom Objective, 30W Halogen Transmitted / 1W LED Incident, 110mm Working Distance - Euromex
Take advantage of the combination of precise magnification, adjustable bright- and dark-field illumination, and an ergonomic gemology stand for consistent assessment and faster decision-making in the laboratory; order directly via Metav Werkzeuge or consult our specialists for accessory recommendations. NexiusZoom NZ.1902-GEML — Binocular stereo microscope with 6.7–45× magnification and gemology tilting stand (Euromex) NexiusZoom NZ.1902-GEML is a binocular stereomicroscope developed for gemmology, combining a broad zoom range with adjustable top and transmitted illumination for reliable inspection of stones and small samples. 6.7–45× magnification range Integrated 1 W LED top light and 30 W halogen transmitted light Gemology tilting stand 0–45° 110 mm working distance with antifungal-treated optics Precise magnification for confident inclusion analysis The stereomicroscope delivers a 6.7–45× magnification range via a zoom ratio of 1:6.7, paired with HWF eyepieces 10×/22 mm to provide a clear, comfortable field of view from 4.9–32.8 mm. This configuration enables the identification of internal features and surface details without frequent refocusing. The binocular head facilitates a natural stereoscopic perception, while the diopter range of −5 to +5 and a pupil distance of 54–75 mm accommodate different operators. The summed effect is a reduction in inspection time and a measurable increase in diagnostic certainty when evaluating cut, clarity and facet conditions. Lighting that reveals true colour and hidden features A dual illumination concept supports both surface and internal examination: a dimmable 1 W LED top light for glare control and a dimmable 30 W halogen transmitted light (6 V lamp voltage) for excellent colour rendering. The transmitted illumination can be switched between bright-field/dark-field modes and used simultaneously with the top light, enabling contrast enhancement for inclusions and grain structure. An integrated iris diaphragm refines the aperture for clearer depth perception. These lighting options translate directly into more reliable grading and fewer ambiguous assessments during routine gemmological work. Ergonomic stand and durable optics for continuous use The dedicated gemology stand features an arm tilt from 0–45°, a head angle of 45° and a 110 mm working distance, offering comfortable posture during prolonged inspections and precise sample positioning. The object clamp (positionable left or right) and a head acceptance diameter of 76 mm support a variety of mounts and fixtures. Optics are antifungal-treated and anti-reflection-coated to maintain clarity in humid environments and reduce stray reflections, preserving long-term image quality. Supplied accessories include the HWF eyepieces 10×/22 mm, object clamp, power cable, dust cover, a spare fuse and the user manual, all packaged in a polystyrol box for secure delivery. For a detailed accessory consultation or to discuss workstation integration for the NexiusZoom, contact Metav Werkzeuge to tailor the configuration to gemmological requirements; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.1902-GEML Product type: Stereomicroscope Model series: NexiusZoom Brand: Euromex Microscope head: Binocular Power supply: Internal Packaging: Polystyrol box Facts Magnification min: 6.7× Magnification max: 45× Zoom objective min: 0.67× Zoom objective max: 4.5× Zoom ratio: 1:6.7 Eyepiece magnification: 10× Eyepiece field number: 22 mm Object field min: 4.9 mm Object field max: 32.8 mm Working distance: 110 mm Top-light power per source: 1 W Transmitted-light power: 30 W Transmitted lamp voltage: 6 V Mains voltage range: 100–240 V AC Pupillary distance: 54–75 mm Diopter range: −5 to +5 Head acceptance diameter: 76 mm Stand tilt range: 0°–45° Head angle: 45° Special features 2 HWF eyepieces 10×/22 mm included Integrated 1 W LED top light, dimmable 30 W halogen transmitted light, dimmable Bright-field / dark-field switchable Simultaneous top and transmitted illumination Iris diaphragm integrated Antifungal-treated optics Anti-reflection-coated optics Object clamp included (positionable left or right) Dust cover; spare fuse; power cable; user manual included FAQ What magnification range is available for detailed gem inspection? The NexiusZoom NZ.1902-GEML provides a magnification range of 6.7–45×, achieved by the zoom objective (0.67–4.5×) together with the 10× eyepieces, suitable for both surface and internal feature analysis. Can the lighting be adjusted for different stone types? Yes, the system combines a dimmable 1 W LED top light and a dimmable 30 W halogen transmitted light; bright-field and dark-field modes are switchable to adapt contrast and colour rendering for different materials. Is the stand suitable for prolonged examination sessions? The gemology tilting stand with 0–45° arm tilt, a head angle of 45° and a 110 mm working distance offers ergonomic positioning to reduce operator fatigue during extended use. Which accessories are supplied with the stereomicroscope? Included with the instrument are 2 HWF eyepieces 10×/22 mm, an object clamp, power cable, dust cover, spare fuse and the user manual; the unit arrives packaged in a polystyrol box. Is a camera adaptor compatible with the microscope head? The binocular head accepts a 76 mm diameter head fitting; camera adaptors designed for a 76 mm head acceptance can be used—verify adapter compatibility with the NexiusZoom NZ.1902-GEML and the intended imaging device. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.7–45× NexiusZoom Binocular Stereo Zoom Microscope With 0.67–4.5× Zoom Objective, Fluorescence Ring Light 7W / Halogen Transmitted 30W, 0–45° Gemology Tilting Stand - Euromex
Take advantage of high-contrast gemological imaging and a robust tilt stand for reliable inspection and documentation; the integrated halogen transmitted and fluorescent incident illumination ensure adaptable lighting for both bright- and dark-field work. Order the NexiusZoom directly via Metav Werkzeuge GmbH or consult our specialists for tailored advice. NexiusZoom Binocular Stereo Zoom Microscope NZ.1902-GEMF — 6.7–45× magnification, Gemology tilt stand NexiusZoom is a binocular stereo microscope designed for gemological inspection, combining a wide zoom range with a 0–45° tilting gemology stand for comfortable, accurate examination in both bright- and dark-field. Binocular zoom 6.7–45× magnification Integrated halogen transmitted illumination, adjustable Fluorescent incident light for dark-field observation 110 mm working distance for easy sample handling Precise visual control for gemstone assessment The NexiusZoom delivers a broad magnification range from 6.7–45×, driven by a 0.67–4.5× zoom objective, which enables rapid switching between overview and detail inspection without changing objectives. This range supports tasks from general sorting to close inclusion analysis, reducing handling and setup time. The instrument includes HWF 10×/22 mm eyepieces, offering a comfortable field of view and a 22 mm field number for efficient visual throughput. The binocular head and adjustable interpupillary distance (54–75 mm) contribute to prolonged, fatigue-free use in routine gemmological workflows. Flexible lighting and optical quality for accurate grading Lighting is central to gemology; this system combines a 30 W halogen transmitted illumination (brightness adjustable) with a 7 W fluorescent incident light (not dimmable) to support both bright-field and dark-field techniques. An integrated iris diaphragm allows contrast optimisation for faceting and inclusion detection. The optics are antifungal-treated and anti-reflective coated, enhancing clarity and reducing maintenance in humid environments — essential for consistent colour assessment and inclusion visibility in precious stones. The transmitted and incident lights can be used simultaneously for specialised contrast methods. Ergonomic design and practical features for workshop use Built on a gemology tilt stand with a 0–45° tilt range, the microscope permits natural working postures and precise sample angling for table and pavilion inspection. The 110 mm working distance provides room for clamps and tools; an object clamp is supplied and can be mounted on the right or left. The instrument’s head fitting diameter is 76 mm ; it accommodates two eyepieces and supports a diopter range of -5 to +5 dpt for individual visual correction. Supplied accessories include eyepieces, net cable, dust cover and spare fuse for immediate deployment in the workshop. For personalised advice on integrating the NexiusZoom into a gemological workflow or to request a formal quotation, contact Metav Werkzeuge GmbH in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and next steps Technical Data Article number: NZ.1902-GEMF Model series: NexiusZoom Product type: Stereomicroscope Brand: Euromex Packaging: Polystyrene box Core specifications Magnification range: 6.7–45× Zoom objective: 0.67–4.5× Eyepiece magnification: 10× Working distance: 110 mm Object field: 4.9–32.8 mm Field number (eyepiece): 22 mm Interpupillary distance: 54–75 mm Diopter range: -5 to +5 dpt Transmitted light power: 30 W Incident light power per source: 7 W Supply voltage: 100–240 V AC Head fitting diameter: 76 mm Stand tilt range: 0–45° Features and functionality Binocular head (two eyepieces) HWF eyepieces 10×/22 mm Integrated incident illumination (fluorescent, gas discharge) Integrated transmitted illumination (halogen), dimmable Bright-field and dark-field convertible Iris diaphragm integrated Optics antifungal-treated Optics anti-reflective coated Object clamp included (positionable right or left) Internal power supply Supplied: net cable, dust cover, spare fuse, user manual FAQ What magnification range does the system cover? The NexiusZoom stereo microscope provides a magnification range of 6.7–45×, achieved with a 0.67–4.5× zoom objective combined with 10× eyepieces, suitable for both overview and detailed gem inspection. Can bright-field and dark-field observations be performed with the same setup? Yes, the instrument features convertible bright-field and dark-field modes with integrated halogen transmitted and fluorescent incident illumination, allowing combined techniques without changing the optical train. Is the transmitted illumination dimmable? The 30 W halogen transmitted illumination is dimmable for contrast control, while the 7 W fluorescent incident light is fixed in intensity. What ergonomic advantages does the tilt stand offer? The gemology tilt stand allows tilting between 0–45°, enabling comfortable inspection angles for faceted stones and easing alignment of inclusions without repositioning the sample repeatedly. Which accessories are supplied with the microscope? Included are two HWF 10×/22 mm eyepieces, an object clamp, net cable, dust cover, spare fuse and the user manual for immediate workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Black-White Stage Plate, Compatible With StereoBlue - Euromex
Take advantage of a compact, high‑contrast stage solution that improves specimen orientation while remaining fully compatible with StereoBlue instruments, making it ideal for routine stereo microscopy tasks and simple visual inspection. Order or request procurement advice via Metav Werkzeuge for reliable supply and expert guidance. SB.9956 Black-and-White Object Stage Plate — 60 mm (Euromex) A SB.9956 object stage plate designed for stereo microscopes, delivering a high‑contrast black-and-white surface to aid specimen placement and visual differentiation in the StereoBlue series. High-contrast black-and-white surface 60 mm diameter for small specimens Compatible with StereoBlue series Improved contrast for clearer specimen orientation The black-and-white design of this stage plate provides a clear, alternating background that enhances visual separation of small parts and delicate specimens. For stereo microscopes, such contrast reduces the time spent locating and aligning items, so routine inspection and sorting tasks are more efficient. The plate functions as a straightforward visual aid rather than an optical accessory, ensuring fast orientation without modifying the instrument's optical path. Compact size tailored to bench-top work With a 60 mm diameter, the plate is optimised for small samples and confined workspaces. The reduced footprint supports neat microscope staging and helps maintain an organised workbench, particularly where multiple specimens are processed in sequence. The compact format is beneficial in applications where quick specimen swaps and close‑up visual checks are the priority. Seamless compatibility with established series The plate is designed for the StereoBlue range, and integration requires no alteration to existing sample holders; the plate aligns with the intended mounting and staging routines of the series. This compatibility minimises downtime and supports consistent workflow across instruments of the same family, making it a practical choice for laboratories and workshops standardised on that series. Practical handling and uses in inspection routines The plate serves as a simple but effective aid during visual inspection, quality checks, and preparatory sorting. The alternating black-and-white zones make edges and contours more apparent under incident light, assisting operators when handling components, biological specimens, or small assemblies. As a non-electronic accessory, it supports immediate reuse and straightforward cleaning between tasks. Durable supply and procurement reliability Sourced from Euromex, the plate is a purpose‑made accessory that fits established stereo setups and is listed alongside compatible SKUs to support cross‑referencing. For procurement and logistics, Metav Werkzeuge provides distribution and order support from Emmerich, ensuring that supply is traceable and that replacement items are available when required. For supply, compatibility checks or procurement assistance for the Euromex SB.9956, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for dependable delivery and expert advice. Technical Data Article number: SB.9956 Label: Schwarz-weiße Objekttischplatte, Durchmesser 60 mm Product type: Object stage plate Manufacturer: Euromex Compatible series: StereoBlue Dimensions & core data Diameter: 60 mm Special features Black-and-white surface Cross-selling SKUs: SB.1302;SB.1302-P;SB.1402;SB.1402-P;SB.1702;SB.1702-P;SB.1703;SB.1703-P;SB.1902;SB.1902-P;SB.1903;SB.1903-P;SB.3903;SB.3903-P FAQ Is this stage plate suitable for the StereoBlue series? The Euromex SB.9956 is specified as compatible with the StereoBlue series and is made to integrate with the standard staging of that product family. What size of specimens is this plate intended for? The plate has a diameter of 60 mm, which is suitable for small to medium specimens and for tasks requiring compact staging. Does the black-and-white surface affect optical quality? The surface is a visual aid for contrast and orientation; it does not alter the microscope optics and is intended for positioning and inspection rather than imaging enhancement. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
60mm Infinite EIS Semi-Apochromatic Plan Objective 5x 0.15 NA 20mm Working Distance M25 Thread - Euromex
Benefit from precise low-magnification imaging, robust mechanical compatibility and a generous working distance for reliable sample access; order this objective directly via Metav Werkzeuge or consult our technical advisors for integration support. DX.7905-R microscope objective — Euromex, 5× / 0.15, M25, 20 mm WD A DX.7905-R microscope objective designed for infinity-corrected, plan semi-apochromatic imaging at low magnification, optimised for clear, distortion-free overview observations Infinity-corrected for accurate imaging Plan semi-apochromat optical correction 5× magnification, NA 0.15, 20 mm working distance M25 thread and stress-free mounting High‑precision optics for consistent overview imaging The DX.7905-R delivers a combination of infinity-corrected design and plan semi-apochromat correction that reduces field curvature and colour fringing at low magnification. This optical arrangement translates into flatter images across the field, which is particularly useful during assembly inspections, material overviews or routine sample scanning. The 5× magnification and numerical aperture of 0.15 balance depth of field and resolution to show sufficient detail while preserving a broad field of view. The explanation of the optical terms supports purchasing decisions: “infinity-corrected” means the objective projects parallel rays to the tube lens for modular optical setups; “plan” indicates field flattening for a consistent image from centre to edge. Practical mechanical design for straightforward integration Mechanical features focus on ease of use in existing setups: the M25 thread ensures compatibility with many objective mounts and adapters, while the stress-free mounting reduces internal lens strain that can affect image quality and long-term stability. The 20 mm working distance provides comfortable access above the specimen, allowing room for light sources, manipulators or pick-and-place heads without sacrificing image performance. These characteristics make this objective suitable for retrofit in workbenches, inspection stations and laboratory microscopes where mechanical fit and sample access are important considerations. Application guidance and handling recommendations This objective is supplied without coverslip correction, so it is optimised for direct observation of specimens or samples where no coverslip is used; when samples are examined under a coverslip, chromatic or focus offsets may occur and should be compensated elsewhere in the optical path. The optical and mechanical specifications make the component well suited to industrial inspection, educational demonstrations and routine quality control tasks. For users unfamiliar with optical indices, the numerical aperture indicates light-gathering ability and affects contrast and resolution; with NA 0.15, expect a practical compromise between contrast and depth of field ideal for overview imaging. Contact Metav Werkzeuge for tailored advice on system compatibility and fast supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DX.7905-R Label: Unendlich EIS 60 mm Plan semi-apo PL-SAPOLRi 5x/0.15 spannungsfrei Objektiv Manufacturer: Euromex Microscopen bv Core specifications Product type: Objective / lens Magnification: 5× Numerical aperture: 0.15 Working distance: 20 mm Thread: M25 Features Infinity-corrected, EIS 60 mm Plan semi-apochromat Stress-free mounting Without coverslip correction FAQ Is this objective compatible with standard infinity-corrected microscope systems? The DX.7905-R is an infinity-corrected objective intended for use in infinity optical systems; confirm tube lens specifications on the host microscope before installation. Can the objective be used with a coverslip in place? This objective is supplied without coverslip correction, so using a coverslip may introduce focus or chromatic offsets that require optical compensation elsewhere. Which thread is required for mounting the objective? The objective uses an M25 thread for attachment; appropriate M25 adaptors or holders must be used for secure integration. What types of inspection tasks suit this objective best? The combination of 5× magnification, NA 0.15 and a 20 mm working distance makes it well suited for general overview inspections, material checks and educational demonstrations where a broad field and comfortable sample access are priorities. Who manufactures this objective and where can further information be requested? The objective is manufactured by Euromex Microscopen bv; for detailed specifications or clarifications consult the manufacturer data sheet or contact Metav Werkzeuge for advice and supply options. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
60mm Infinite EIS Semi‑Apo Plan Objective PL‑SAPOLRi 20/0.45 3.1mm Working Distance M25 Thread - Euromex
Take advantage of the combination of infinity-corrected optics and a short 3.1 mm working distance for precise, repeatable imaging. Order the DX.7920-R directly via Metav Werkzeuge or consult our specialists for integration advice. DX.7920-R Infinity-corrected plan semi-apochromat objective, 20x/0.45 (Euromex) DX.7920-R is an infinity-corrected plan semi-apochromat objective designed for high-contrast, flat-field imaging in laboratory and industrial microscopy Infinity-corrected optical design 20x magnification, NA 0.45 Stress-free mounting for stable imaging M25 thread, 3.1 mm working distance Achieve consistent, flat-field images with high contrast The infinity-corrected design and plan semi-apochromat correction ensure a flat field across the image plane, reducing field curvature and chromatic aberration for clearer results in routine inspection and documentation. With a 20x magnification and NA 0.45, this objective balances resolution and depth of field for most medium-magnification applications. The optical choices translate directly into higher throughput: fewer retakes, faster measurements and reliable image quality for analytical tasks. Mechanical stability and short working distance for fine samples A stress-free mounting reduces mechanical distortion and stabilises the optical assembly during handling and temperature changes, which is particularly important for repeat measurements. The objective features an M25 thread for straightforward attachment to compatible microscope nosepieces and adaptors. The 3.1 mm working distance is optimised for close-focus tasks and thin specimens, offering a compact working envelope while maintaining safe clearance for fine sample manipulation. Clear specification for specific laboratory workflows Designed without cover glass correction, the objective is optimised for preparations that do not require a cover slip or where imaging is performed directly on surfaces. This explicit design choice avoids confusion during configuration and supports consistent calibration in systems where cover glass correction is not used. Optical labelling such as PL‑SAPOLRi indicates the manufacturer's designation and helps to match the objective to corresponding tubes and condenser setups in industrial microscopes. Reliable choice for repeated, traceable results When traceability and consistency matter, choosing an objective with defined optical and mechanical parameters reduces uncertainty. The combination of a robust plan semi-apochromat correction, defined numerical aperture and a compact working distance supports repeatable inspections and documentation routines. As part of a controlled supply chain, integration with a dependable distributor ensures regular availability and swift replacement when systems are scaled or maintained. Speak to Metav Werkzeuge for tailored advice on integrating the Euromex DX.7920-R into existing microscopes and to arrange reliable delivery from Emmerich. Technical Data Article number: DX.7920-R Type: Objective / Lens Brand: Euromex Facts Magnification: 20x Numerical aperture: 0.45 Working distance: 3.1 mm Thread: M25 Special features Infinity-corrected design Plan semi-apochromat correction Stress-free mounting No cover glass correction PL‑SAPOLRi designation FAQ What magnification and numerical aperture does this objective provide? The DX.7920-R objective delivers 20x magnification with a 0.45 numerical aperture, suitable for medium-magnification applications where a balance of resolution and depth of field is required. Is the objective compatible with standard infinity-corrected microscope systems? Yes, the optical design is infinity-corrected, making the objective compatible with microscopes designed for infinity optics when mounted with the appropriate M25 adaptor. Can this objective be used with cover glass specimens? This objective is supplied without cover glass correction, so it is optimised for specimens imaged without a cover slip or where no correction is required. How close can the objective focus to the sample surface? The defined working distance is 3.1 mm, which allows close focusing for thin samples and surface inspections while maintaining a safe clearance for probes and manipulators. What mounting interface does the objective use? The objective uses an M25 thread, enabling direct attachment to compatible nosepieces or via standard adaptors for many industrial microscope setups. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
60mm Infinity EIS 40x/0.65 Plan Objective With 0.7mm Working Distance, M25 Thread - Euromex
Take advantage of a high‑resolution 40× Plan objective with a 0.65 numerical aperture and precise 0.7 mm working distance for sharp, flat-field images in demanding microscopy tasks; order directly via Metav Werkzeuge or consult our specialists for system matching. Euromex Infinity EIS 40× Plan Objective DX.7940‑T — Infinity‑corrected, M25 thread, 0.7 mm WD The Euromex Infinity EIS 40× Plan Objective DX.7940‑T is an infinity‑corrected plan lens designed for high‑contrast, high‑resolution microscopy with cover‑glass correction for reliably flat fields Infinity‑corrected Plan optics 40× magnification, 0.65 NA M25 thread for standard holders 0.7 mm working distance Cover‑glass correction High‑resolution imaging for demanding inspection tasks This objective combines Plan optics with an infinity‑corrected design and a 0.65 numerical aperture to deliver a consistently flat field and enhanced detail across the image plane. The optical correction reduces field curvature and edge aberrations, which benefits image analysis and documentation workflows; in practice this means fewer retakes and more reliable measurements when inspecting fine structures. For users familiar with microscopy terminology, the Plan designation indicates objective correction across the field, while the infinity system requires a compatible tube lens in the microscope stand. Compact mechanical design that integrates with common systems Engineered with an M25 thread, this objective fits standard nosepieces and accessory holders that accept M25 mounting, simplifying integration into existing microscope turrets. The specified working distance of 0.7 mm is optimised for high‑power observation of coverslipped specimens; the short clearance is ideal for thin biological sections and polished material samples but requires cautious focusing and sufficient clearance planning during automated stage movements. The built‑in cover‑glass correction compensates for typical cover‑slip thickness variations and maintains image performance without additional correction collars. Proven suitability for laboratory and educational use Precision glass and careful assembly ensure stable optical performance for routine laboratory inspection, teaching environments and light industrial microscopy. The lens is particularly useful where reproducible, high‑contrast images are required for routine documentation or comparative analysis. The robust optical design supports confident imaging across multiple sessions, contributing to reliable workflows and reduced downtime in inspection chains. Practical notes on optical performance and maintenance The 0.65 NA represents a balance between resolving power and depth of field at 40× magnification: higher NA improves lateral resolution but reduces depth of field, so illumination and focus strategy should be chosen accordingly. Routine maintenance—gentle cleaning with lens tissue and appropriate solvents, avoidance of contact with the front element and secure storage—preserves performance over time. As an optical component intended for precision use, correct handling minimises the need for recalibration and helps sustain consistent image quality. For technical matching, supply reliability and purchase assistance, contact Metav Werkzeuge — Metav’s specialists will advise on integration into existing microscopes and ensure prompt delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DX.7940-T Product type: Objective / lens Manufacturer: Euromex Data Magnification: 40× Numerical aperture: 0.65 Working distance: 0.7 mm Thread: M25 Special features Infinity‑corrected design Plan optics (flat field correction) Cover‑glass correction SKU: DX.7940-T Label: Infinity EIS 60mm Plan SAPOLi 40x/0.65 Objective (cover‑glass correction) FAQ Which microscope systems is this objective compatible with? The objective is designed for infinity‑corrected microscopes using an M25 nosepiece; the Euromex Infinity EIS 40× Plan Objective DX.7940‑T mounts to standard M25 holders and integrates with stands that provide an infinity tube lens. What does the 0.7 mm working distance mean for sample preparation? A 0.7 mm working distance indicates a short clearance between the front element and the specimen, suitable for coverslipped samples and thin sections; careful stage movement and proper sample mounting are recommended when using the objective. Is the lens corrected for cover glasses? Yes — the objective includes cover‑glass correction, which compensates for common cover‑slip thicknesses and helps maintain sharpness and colour fidelity across the field. How does the 0.65 numerical aperture affect image quality? A 0.65 NA offers a good compromise between lateral resolution and depth of field at 40× magnification; it improves detail resolution while requiring considered illumination and focus practice for optimal results. What maintenance helps preserve optical performance? Gentle cleaning with appropriate lens tissue and solvent, secure storage and avoidance of contact with the front element will preserve the objective’s performance and longevity. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
60mm Infinity EIS Plan Objective 10x/0.25, 10.2mm Working Distance, M25 Thread - Euromex
Take advantage of an infinity-corrected, plan optical design combined with 10x magnification and a 0.25 numerical aperture to secure sharp, flat-field images with reliable cover-glass correction; order directly via Metav Werkzeuge or consult our specialists for suitability to specific microscope systems. DX.7910-T — Euromex infinity-corrected plan microscope objective, 10x / 0.25, M25 DX.7910-T is an infinity-corrected plan objective designed for laboratory and industrial microscopy, offering a flat imaging field, cover-glass correction and a compact M25 mounting for compatibility with a wide range of microscope turrets. Infinity-corrected optical design 10x magnification, 0.25 numerical aperture M25 mounting thread for compact heads 10.2 mm working distance, cover-glass correction Precise imaging for routine and demanding inspection The infinity-corrected, plan optical construction delivers a flat field across the image, reducing peripheral distortion and ensuring that measurements and visual inspections remain consistent over the full field of view. With 10x magnification and a 0.25 numerical aperture, the lens balances resolution and depth of field to reveal fine structural details while maintaining an accessible depth for handling standard specimens. The cover-glass correction compensates for typical slide preparation variations, improving contrast and focus without lengthy adjustments. Practical compatibility and mounting benefits Compact M25 thread mounting permits integration into microscopes and inspection heads that accept small-diameter objectives, enabling application in benchtop microscopes and some dedicated inspection systems. The 10.2 mm working distance provides enough clearance for standard sample preparations and micro-manipulation, while the planar correction reduces the need for repositioning or refocusing when scanning across a specimen. For workshops and quality labs seeking dependable optics in confined assemblies, this design supports efficient workflows and predictable image quality. Understanding the technical choices and their benefit An infinity-corrected objective projects parallel light to the microscope tube optics, allowing the tube lens to form the image; this separation of objective and tube functions simplifies system design and improves adaptability when exchanging optical components. The plan designation indicates correction for field curvature, meaning the centre and edges of the image are brought to the same focal plane—advantageous for measurement tasks and imaging of flat samples. Together, these characteristics reduce aberrations and support consistent documentation and analysis across routine inspection tasks. For precise procurement and application advice on the Euromex DX.7910-T infinity-corrected plan objective, contact Metav Werkzeuge for tailored system compatibility checks and reliable supply directly from Emmerich. Technical data Article number: DX.7910-T Product type: Objective / lens Manufacturer: Euromex Label: Unendlich EIS 60 mm Plan SAPOLi 10x/0.25 objective, M25 thread, 10.2 mm working distance, cover-glass correction Core specifications Magnification: 10x Numerical aperture: 0.25 Working distance: 10.2 mm Mounting thread: M25 Features and compatibility Infinity-corrected design Plan (flat-field) correction Cover-glass correction Suitable for laboratory and inspection use SKU: DX.7910-T FAQ What magnification and numerical aperture does this objective provide? The Euromex DX.7910-T objective offers 10x magnification with a 0.25 numerical aperture, a combination chosen to balance resolution and usable depth of field for general microscopy and inspection tasks. Is the objective corrected for cover glass thickness? Yes, the objective includes cover-glass correction, which compensates for standard slide preparation and helps maintain focus and image quality when imaging through coverslips. Will the DX.7910-T fit a standard microscope turret? The DX.7910-T uses an M25 mounting thread, suitable for turrets and heads designed for compact objectives; confirmation of compatibility with a specific microscope model is recommended prior to purchase. What are the advantages of an infinity-corrected, plan objective for measurement work? An infinity-corrected design separates objective and tube optics, improving modularity, while plan correction ensures a flat imaging field—both features support more accurate measurements and consistent imaging across the whole field of view. Can this objective be used for industrial inspection as well as routine lab work? Yes, the combination of robust optical correction, 10.2 mm working distance and compact M25 mount makes the objective suitable for both laboratory analysis and many industrial inspection setups. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
60mm Infinity EIS Plan Objective 20x/0.40 M25 Thread 12mm Working Distance With Cover Glass Correction - Euromex
Precision imaging is achieved through the blend of 20× magnification and a 0.40 numerical aperture, together with a 12 mm working distance that eases sample access; these attributes deliver sharp, high-contrast detail for inspection and documentation. Order the Unendlich EIS 60 mm Plan SAPOLi 20×/0.40 objective (DX.7920-T) directly via Metav Werkzeuge or ask our consultants if needed. Unendlich EIS 60 mm Plan SAPOLi 20×/0.40 objective — Euromex microscope lens with cover-glass correction The Unendlich EIS 60 mm Plan SAPOLi 20×/0.40 objective is an infinity-corrected plan objective designed for routine inspection and documentation in laboratory and industrial settings Infinity-corrected plan optics 20× magnification, 0.40 numerical aperture M25 mounting thread for secure fit 12 mm working distance, cover-glass correction Optimised optical performance for precise inspection The objective delivers a balance of resolution and depth of field through its 20× magnification combined with a 0.40 numerical aperture, which raises contrast and resolves fine structure in typical inspection tasks. As an infinity-corrected lens with plan field correction, the design keeps the image plane flat across the field of view, reducing edge curvature and improving measurement reliability. This makes it suitable for visual inspection, photomicrography and comparative metrology where consistent, distortion-free images accelerate decision-making and reduce rework. Practical mounting and handling to speed workflow A defined M25 thread simplifies secure mounting to microscope turrets or adapter sleeves, while the 12 mm working distance gives comfortable clearance for samples and probes without compromising image quality. The integrated cover-glass correction compensates for standard slide thickness, so the optical system maintains focus and contrast when imaging through a coverslip or thin protective layer. These practical design choices reduce setup time and make the lens straightforward to integrate into existing microscopy chains and quality-control stations. Application-focused reliability for inspection and documentation Engineered for routine laboratory and light industrial use, the objective supports repeatable imaging across batches and samples, helping to standardise inspection protocols. The plan characteristic ensures even illumination and consistent measurement across the field, which is particularly beneficial for image stitching or automated analysis downstream. Operators in research, education and production control will value the combination of stable mechanics and clear optics that together strengthen traceability and confidence in inspection results. Contact Metav Werkzeuge today to specify the right Euromex objective for the inspection scenario and secure precise, repeatable imaging with the DX.7920-T Technical data SKU: DX.7920-T Model: Unendlich EIS 60 mm Plan SAPOLi 20×/0.40 objective Product type: Objective / lens Manufacturer: Euromex Specifications Magnification: 20× Numerical aperture: 0.40 Working distance: 12 mm Mount thread: M25 Features Infinity-corrected optical design Plan-field correction Cover-glass correction SAPOLi series model FAQ What imaging tasks is this objective best suited for? The Unendlich EIS 60 mm Plan SAPOLi 20×/0.40 objective is designed for routine inspection, documentation and comparative measurements where a flat field and good resolution are required. Will the objective work with standard microscope stands? Yes — the lens uses an M25 mounting thread and is compatible with microscope turrets and adapters that accept M25 objectives. How does cover-glass correction affect image quality? Cover-glass correction maintains focus and contrast when imaging through a coverslip; the DX.7920-T compensates for typical slide thickness so images remain sharp across the field. Can the objective be used for photomicrography and measurement? The infinity-corrected, plan design of this Euromex objective supports consistent photomicrography and measurement workflows by reducing distortion and ensuring a flat image plane. Is the working distance sufficient for samples with probes or fixtures? With a 12 mm working distance, the objective gives practical clearance for probes, fixtures or thicker specimens while preserving optical performance. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
60mm Infinity EIS Plan Objective 4x 0.10 NA M25 Thread 30mm Working Distance Glass-Cover Correction - Euromex
Take advantage of a compact infinite-corrected Plan objective that combines reliable low-distortion imaging with a generous 30 mm working distance and standard M25 threading for straightforward integration into inspection rigs. Order directly via Metav Werkzeuge or request advice from our consultants to confirm compatibility and delivery. Infinite-corrected EIS 60 mm Plan SAPOLRi 4×/0.10 Objective (M25, 30 mm WD) — Euromex The infinite-corrected EIS 60 mm Plan SAPOLRi 4×/0.10 objective is a low-magnification lens optimised for wide-field inspection and documentation in laboratory and industrial microscopy applications Infinite-corrected Plan optics for flat fields 4× magnification with numerical aperture 0.10 30 mm working distance for fixtures and samples M25 thread and cover-glass correction Improved image uniformity for reliable inspection The lens uses infinite-corrected Plan optics, which maintain a flat field across the image circle and reduce peripheral aberrations; this yields consistent results during measurement, imaging and visual inspection. The 4× magnification together with the NA 0.10 provides a balance between field of view and resolution, making the objective suitable for overview imaging where geometric fidelity matters. Engineers benefit from predictable optical behaviour when documenting components or performing coarse dimensional checks. Seamless integration into microscope systems and fixtures With an M25 thread and a 30 mm working distance, the objective is designed for quick mounting and practical clearance above samples and fixturing. The M25 interface follows common low-power objective standards, enabling compatibility with many focusing noses and auxiliary adapters without complex modification. The generous working distance reduces the risk of collision with probes or tools, which helps to protect both the specimen and the lens during routine inspection workflows. Tailored for inspection, documentation and quality control The SAPOLRi designation indicates a correction scheme optimised for planar imaging, which helps digital cameras and eyepiece assemblies deliver uniform results across the frame. As a low-power objective lens, it is particularly useful for overview scans, assembly verification and printed circuit board inspection where a broad field and even illumination are priorities. The cover-glass correction helps to maintain focus and resolution when imaging through standard slides or thin protective layers. Practical optical considerations and handling advice The numerical aperture and magnification determine depth of field and light capture: a 0.10 NA yields an extended depth of field and forgiving focus, which simplifies alignment for coarse inspection tasks. The cover-glass correction compensates for a standard glass thickness, improving edge sharpness when a slide or protective glass is present. Regular dust protection and routine cleaning with appropriate optical cloths preserve performance; the mechanical M25 thread ensures secure mounting and repeatable positioning during instrument changeover. Discuss system compatibility and order through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and reliable supply from Emmerich. Technical data Article number: DX.7904-T UID: DX.7904-T Product type: Objective / lens Manufacturer label: Unendlich EIS 60 mm Plan SAPOLRi 4x/0.10 Objective, M25 thread, 30 mm working distance, cover-glass correction Core specifications Magnification: 4× Numerical aperture: 0.10 Working distance: 30 mm Thread: M25 Special features Infinite-corrected Plan optics SAPOLRi correction Cover-glass correction Low-magnification objective for inspection and documentation FAQ What is the recommended use for this objective? The Euromex infinite-corrected EIS 60 mm Plan SAPOLRi 4×/0.10 objective is intended for wide-field inspection, documentation and quality-control tasks where a flat field and reliable overview imaging are required. Will the M25 thread fit my existing microscope nosepiece? Compatibility depends on the microscope nosepiece; the objective uses an M25 thread which matches many low-power objective adapters and focusing modules commonly used in industrial microscopes. How does the numerical aperture affect imaging with this lens? A numerical aperture of 0.10 provides a larger depth of field and reduced sensitivity to focus error, which is advantageous for coarse inspection and documentation where sample height variance is expected. Can this objective be used with a camera for documentation? Yes, the Plan correction and infinite objective design make the lens well suited for camera-based imaging, delivering even illumination and reduced edge distortion for digital capture systems. What does cover-glass correction mean and when is it needed? Cover-glass correction compensates optically for a thin glass layer between the specimen and the lens; this objective’s correction improves image sharpness when imaging through standard protective glass or slides. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
60mm Infinity EIS Plan Objective 50x/0.80 M25 Thread 0.19mm Working Distance - Euromex
Benefit from infinity-corrected optics, 50x magnification at 0.80 NA, and a precise M25 mounting that together deliver reliable high-resolution imaging; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Infinity-corrected Plan APOLi 50x/0.80 objective (EIS 60 mm) — Euromex, M25 mount The Infinity-corrected Plan APOLi 50x/0.80 objective is an optical lens designed for high-resolution microscopy applications, featuring an M25 mounting thread and integrated cover-glass correction for use with prepared specimens 50x magnification with high numerical aperture 0.80 Infinity-corrected Plan APOLi optical design M25 mounting thread for compact microscope setups Cover-glass correction and 0.19 mm working distance Exceptional resolution through optimised optical design The infinity-corrected optical concept used here ensures that the objective delivers consistent imaging performance when paired with a matching tube lens. The Plan APOLi design corrects field flatness, so image sharpness extends across the field of view rather than only in the centre. With 50x magnification combined with a 0.80 NA, the lens increases lateral resolution and light-gathering capability, which results in clearer details on fine structures. This configuration benefits tasks that demand precise visual discrimination under transmitted-light microscopes, where enhanced contrast and resolution directly support reliable measurement and inspection results. Compact mounting and mechanical compatibility for modular systems The M25 mounting thread is a compact, widely used mechanical standard for supplementary objectives and modular microscope builds. A defined mounting like M25 simplifies mechanical integration into small-footprint or custom optical assemblies and reduces the need for adapter parts. The robust mechanical fit supports stable alignment, which is crucial when working at high magnification because even small shifts reduce image quality. The objective’s mechanical specification therefore contributes to a dependable optical chain and reduces downtime from repeated re‑adjustments. Designed for cover-glass specimens and close working distances This lens includes cover-glass correction, which reduces spherical aberration introduced by typical specimen mounting. The very short 0.19 mm working distance places the front element close to the sample plane, improving numerical aperture utilisation and image fidelity for thin preparations. As a result, the objective is particularly suited to inspections and imaging where specimens are mounted beneath a cover slip or other thin, transparent medium. The optical correction ensures that users gain consistent focus and contrast without complex adjustments for cover-glass effects. Trusted supply and practical procurement for production environments Sourced from a specialist optics manufacturer and distributed via Metav’s European supply channel, the component benefits from a quality-assured supply chain. Metav’s role acts as a practical quality filter for workshop and industrial customers, offering a broad range of measurement and imaging products from stock in Emmerich. For technical clarification on integration, optical pairing or to confirm compatibility with a specific microscope system, consult the manufacturer’s documentation or Metav’s technical advisors; standard contact options are available for further specification checks. This combination of tested optics and reliable distribution supports longer-term productivity and reduces procurement complexity. Contact Metav Werkzeuge for technical configuration advice on Euromex objectives and to arrange supply directly from Emmerich’s fulfilment centre Technical data Article number: DX.7950-T Label: Unendlich EIS 60mm Plan APOLi 50x/0.80 objective. M25 thread. Working distance 0.19 mm. Cover-glass correction Manufacturer: Euromex Core data Magnification: 50x Numerical aperture: 0.80 Mounting thread: M25 Working distance: 0.19 mm EIS: 60 mm Special features Optical type: Plan APOLi Infinity-corrected design Cover-glass correction Product type: Objective / Lens SKU: DX.7950-T FAQ What mounting thread does this objective use? The objective uses an M25 mounting thread and is supplied as the Euromex Infinity-corrected Plan APOLi 50x/0.80 objective (SKU DX.7950-T) What magnification and numerical aperture are provided? This lens offers 50x magnification with a 0.80 numerical aperture, optimised for high-resolution imaging What is the working distance and why does it matter? The working distance is 0.19 mm; this short distance supports high numerical aperture performance but requires specimens to be prepared with appropriate cover-glass correction Is the objective corrected for cover-glass use? Yes, the objective features cover-glass correction, reducing spherical aberration when imaging samples mounted under thin transparent media What does EIS 60 mm indicate? EIS 60 mm denotes the objective’s optical variant as designated by the manufacturer; please refer to the Euromex product documentation for details on system compatibility Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
60mm Infinity EIS Plan Semi-Apochromat Objective 10x/0.30 11mm Working Distance M25 Thread - Euromex
Take advantage of high‑performance Plan semi‑apochromat optics, a 0.30 numerical aperture and an 11 mm working distance for reliable imaging and easier sample access; order the objective directly via Metav Werkzeuge or consult the team for technical advice. Infinity EIS 60 mm Plan Semi‑Apochromat Objective DX.7910-R — 10×/0.30, M25 mount, by Euromex The Infinity EIS 60 mm Plan Semi‑Apochromat Objective DX.7910-R is an infinity‑corrected plan objective lens suited to industrial and laboratory microscopy, combining chromatic correction with a stress‑free optical design and an M25 mounting. Infinity‑corrected plan optics Semi‑apochromat colour correction 0.30 numerical aperture 11 mm working distance, M25 thread Precision optics that improve measurement and image clarity The Infinity‑corrected Plan semi‑apochromat design provides improved correction of spherical and chromatic aberrations compared with simple achromats, delivering sharper images and more reliable measurements. With a 0.30 numerical aperture the objective increases light gathering and resolving power, which translates into finer detail for inspection and documentation. By choosing an objective with clear optical specifications, process engineers and technicians gain a predictable optical basis for metrology and quality control tasks. Integration that speeds up inspection and handling A short but practical 11 mm working distance with an M25 thread enables easier access to specimens and compatibility with a wide range of microscope tube systems and adapters. The stress‑free mechanical design reduces the need for frequent refocusing when moving between samples, supporting faster throughput in routine inspection. Specimen handling becomes more convenient without sacrificing the optical performance essential for repeatable results. Design choices that protect samples and simplify setup The stress‑free construction of the lens minimises mechanical strain and preserves optical alignment during handling and mounting, which is particularly valuable when working with delicate or temperature‑sensitive samples. The objective arrives without cover‑glass correction, making it suitable for use with specimens that are examined without a coverslip; where a coverslip is present, users should be aware that correction is not built in and may affect focal position. Practical applications across laboratories and workshops This objective is suited to microscopy tasks where consistent image quality and handling flexibility matter: routine inspection, documentation, industrial quality assurance and education. The combination of infinity correction, planar field correction and moderate numerical aperture supports both visual inspection and digital imaging workflows, allowing integration with camera systems and documentation routines common in workshop and laboratory environments. Contact Metav Werkzeuge for tailored advice and availability of the Euromex Infinity EIS 60 mm Plan Semi‑Apochromat Objective DX.7910-R — call +49 2822 7131930 or email info@metav-werkzeuge.com for technical clarifications or order support Technical data Article number: DX.7910-R Product: Objective lens Label: Infinity EIS 60 mm Plan semi‑apochromat PL‑SAPOLRi 10x/0.30, stress‑free, without cover‑glass correction Manufacturer: Euromex Key measurements Working distance: 11 mm Mount thread: M25 Magnification: 10× Numerical aperture: 0.30 Features and compatibility Infinity‑corrected optical system Plan semi‑apochromat correction Stress‑free mechanical design No cover‑glass correction Suited to industrial and laboratory microscopes FAQ What mounting thread does the objective use? The objective uses an M25 mounting thread, as specified for the Infinity EIS 60 mm Plan Semi‑Apochromat Objective DX.7910-R. Is this lens corrected for cover slips? This model is supplied without cover‑glass correction; the DX.7910-R is intended for applications where no coverslip correction is required. What working distance can be expected from this objective? The objective offers an 11 mm working distance, providing improved access to samples during manipulation and inspection. Which magnification and numerical aperture does the lens provide? The objective provides 10× magnification with a numerical aperture of 0.30, balancing resolution and depth of field for routine inspection tasks. Can this objective be used with camera systems for documentation? Yes, the infinity‑corrected design and planar optics make the objective suitable for integration with camera adapters and imaging setups commonly used for documentation. Hersteller: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
60mm Infinity Plan Semiapochromatic SAPOLi 100x/1.25 NA Stain-Free Objective M25 0.2mm Working Distance - Euromex
Take advantage of the combination of high resolving power and precise mechanical compatibility to improve routine microscopy workflows; the 100× magnification together with a numerical aperture of 1.25 enables detailed observation while the compact M25 thread and 0.2 mm working distance simplify integration into existing assemblies. Order this objective via Metav Werkzeuge or consult our specialists for application advice. DX.7900-T Infinity‑corrected 100× / 1.25 Plan Semi‑Apochromatic Objective (Objective lens) DX.7900-T is an infinity‑corrected, plan semi‑apochromatic objective designed for high‑resolution light microscopy with M25 mounting and cover‑glass correction. High NA 1.25 for superior resolution 100× magnification for fine detail M25 thread for compact mounting Exceptional resolving power for detailed imaging The objective delivers a marked improvement in detail reproduction thanks to its numerical aperture of 1.25, which defines the light‑gathering ability and resolving power. A higher NA translates directly into finer detail and improved contrast at high magnifications; this makes the lens particularly suitable where precise structural discrimination is required. The plan semi‑apochromatic correction reduces field curvature and compensates for chromatic aberration across the visible spectrum, so images remain sharp from centre to edge. Compact design and straightforward integration With an M25 thread and a compact form factor, the lens integrates easily into systems that accept small‑format objectives. The specified working distance of 0.2 mm supports very close focal approaches for high‑magnification observation while the infinity‑corrected optical design enables compatibility with a wide range of modern microscope tubes and intermediate optics. These mechanical and optical attributes streamline retrofits and reduce alignment time in busy laboratories. Practical optical features explained The optical designation indicates an infinity‑corrected system and cover‑glass correction, meaning the objective is engineered to perform when the specimen is observed through a standard cover glass and when used with a tube lens in an infinity optical path. Cover‑glass correction compensates for the refractive effect of the glass, preserving image quality; users should match cover‑glass thickness and the chosen imaging medium to obtain optimal results. Such design choices reduce the need for downstream image corrections and increase throughput. Applications and benefits for precision microscopy This objective is aimed at demanding tasks that require reliable high magnification and consistent field flatness, such as detailed material inspection, histological observation, or any application needing critical visual assessment under a light microscope. The 100× magnification paired with the high NA supports the visualisation of fine structures, while the compact M25 mount helps laboratories maintain a small, flexible optical footprint. The lens thus contributes to reproducible results and faster sample evaluation in routine and specialised workflows. Speak with Metav Werkzeuge for tailored advice on integrating the DX.7900-T into existing setups or to confirm suitability for specific sample preparations; Metav Werkzeuge provides direct supply and technical guidance from Emmerich. Technical data SKU: DX.7900-T Type: Objective lens Manufacturer: Euromex Specifications Magnification: 100× Numerical aperture: 1.25 Working distance: 0.2 mm Thread: M25 Features Infinity‑corrected optics Plan semi‑apochromatic correction Cover‑glass correction Compact M25 mounting FAQ What magnification and resolving capability does this objective provide? The DX.7900-T objective delivers 100× magnification with a numerical aperture of 1.25, offering high resolving power for fine structural detail. Is the lens corrected for cover glass? Yes, the lens includes cover‑glass correction, designed to maintain image quality when imaging through a standard cover glass. Which mechanical mount is required for this lens? The objective uses an M25 thread, permitting installation in microscopes or adapters that accept M25‑mounted objectives. Does the DX.7900-T require a specific tube lens or optical system? As an infinity‑corrected objective, the DX.7900-T is intended for microscopes with an infinity optical path and should be used with a compatible tube lens for correct image formation. What applications are best suited to this objective? The lens is suited to high‑resolution light microscopy tasks such as material inspection and detailed biological observation where plan field correction and high NA are advantageous. Manufacturer / Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands, info@euromex.com
60mm Infinity Semi-Apochromatic Plan Objective 50x/0.80 M25 0.3mm Working Distance - Euromex
Take advantage of the combination of 50x high‑resolution magnification, a 0.80 numerical aperture and a compact M25 mounting for demanding microscopy work; the short 0.3 mm working distance supports fine-detail inspection. Order the optic directly via Metav Werkzeuge or contact their consultants for integration advice. Unendlich EIS 60 mm Plan semi-apo PL-SAPOLRi 50x/0.80 — 50x Plan Semi‑Apochromat Objective (M25, 0.3 mm WD) by Euromex The Unendlich EIS 60 mm Plan semi-apo PL-SAPOLRi 50x/0.80 is a high‑resolution objective designed for industrial and laboratory microscopes, offering precise imaging with M25 thread mounting. 50x high-resolution objective Numerical aperture 0.80 for high detail M25 thread for compact mounting Plan semi-apochromat correction for flat field Exceptional resolution for detailed inspection The optic delivers 50x magnification combined with a 0.80 numerical aperture (NA), which improves light-gathering and contrast for small feature detection. As an infinite‑corrected objective for an EIS 60 mm system, the design transfers an accurately collimated image to the microscope tube, enabling consistent imaging across different tube optics. The plan semi‑apochromat correction reduces field curvature and chromatic aberration across the visible spectrum, so critical inspection tasks show improved edge sharpness and colour fidelity. This combination of features supports reliable, repeatable measurements and visual assessments in a production or R&D environment. Compact mounting and mechanical integration benefits The M25 thread simplifies installation where space is limited or where specialised adaptors are required; the small footprint suits modular trinocular heads and compact inspection systems. The objective’s 0.3 mm working distance is engineered for close-focus applications and high‑numerical‑aperture performance; such a short working distance enhances resolution but requires careful sample clearance planning. The compact thread size and defined mechanical interface enable straightforward exchangeability, reducing machine downtime and streamlining calibration procedures in a workshop or lab. Clear guidance on optical compatibility and use cases This lens is supplied without cover‑glass correction, so specimens should be imaged without a standard cover slip or with a correction collar on the intermediate optics when cover glass is present. As a plan semi‑apochromat objective, it is well suited to metallurgical inspection, electronics assembly inspection and biological preparations where flatness and reduced chromatic error are priorities. The infinite‑corrected architecture allows the objective to be combined with a range of tube lenses and camera adapters for digital capture, offering flexibility for both visual control and automated image acquisition workflows. Reliability, procurement and workflow advantages Manufactured to industry standards, the optic offers a focused balance of performance and integration ease that supports efficient process control. Choosing this Euromex objective through Metav Werkzeuge provides access to a European supply channel and technical advice from a partner experienced in metrology and workshop equipment. The predictable optical behaviour and standardised mechanical interface reduce setup iterations and support a smoother route to production‑grade imaging, contributing to fewer rejects and more reliable inspection records. Contact Metav Werkzeuge today to discuss how this Euromex 50x plan semi‑apochromat objective fits existing microscope systems or to request a tailored quotation and delivery from Emmerich. Technical Data Article number: DX.7950-R Product type: Objective / Lens Label: Unendlich EIS 60 mm Plan semi-apo PL-SAPOLRi 50x/0.80 Objektiv Manufacturer: Euromex Facts Magnification: 50x Numerical aperture: 0.80 Working distance: 0.3 mm Mount thread: M25 Tube system: Infinite, EIS 60 mm Special features Plan semi‑apochromat correction No cover‑glass correction Compact M25 mounting Series: PL‑SAPOLRi FAQ What magnification and resolution can be expected from this objective? The Euromex Unendlich EIS 60 mm Plan semi‑apo PL‑SAPOLRi 50x/0.80 objective delivers 50x magnification with a high 0.80 numerical aperture, offering enhanced resolution and contrast for fine detail inspection. Is this lens suitable for imaging with a cover slip? The objective is supplied without cover‑glass correction; using a cover slip will introduce spherical aberration unless compensated by the microscope’s intermediate optics or a correction mechanism. Which microscopes is the M25 thread compatible with? The M25 thread provides a compact mechanical interface compatible with heads and adaptors that accept M25 objectives; compatibility should be confirmed against the microscope’s objective mounting specifications and any adaptor requirements. Can this objective be used for digital camera capture? Yes, as an infinite‑corrected objective for an EIS 60 mm system, the optic pairs with appropriate tube lenses and camera adapters for digital imaging, enabling integration into automated inspection setups. What is the impact of the 0.3 mm working distance on sample handling? The short 0.3 mm working distance improves numerical aperture performance but necessitates careful sample clearance and fixturing to avoid contact between objective and specimen. Manufacturer / Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
60mm Measuring Microscope 60x Magnification LED Illumination 0.02mm Scale - Euromex
Precision inspection is simplified by the combination of 60× optical magnification and a reticle with 0.02 mm divisions, together with integrated LED illumination for steady visual conditions; order via Metav Werkzeuge or consult the team for workflow integration. Measuring microscope PB.5012 — 60× magnification, LED illumination (Euromex) The Measuring microscope PB.5012 is a compact inspection microscope designed for bench-top dimensional checks and visual measurement tasks in small-part inspection and quality control. Precise 60× magnification for fine inspection Integrated LED illumination for consistent light Reticle with 0.02 mm division scale Compact design for bench-top metrology Accurate optical measurement for routine quality checks The instrument delivers high-magnification optics that make fine details visible and measurable without complex setups. With 60× magnification and a built-in reticle providing 0.02 mm division spacing, repeatable readings of small features become practical on the inspection bench; the division spacing corresponds to direct visual increments of two hundredths of a millimetre, enabling rapid assessment of micro-dimensions and surface features. This level of detail reduces guesswork during dimensional verification and supports faster decision-making in quality-control loops. Stable LED lighting for consistent visual results A consistently illuminated field improves measurement reliability; the integrated LED illumination supplies uniform light across the viewing area and minimises shadows that can obscure fine lines. Even without specifying lamp wattage, the optical arrangement is oriented towards steady illumination to aid visible contrast of the reticle against specimens. Clear, repeatable lighting conditions shorten inspection times and help maintain objective comparison between successive checks. Practical bench-top design for workshops and labs Designed for everyday use, the device is suitable for small workshops, toolrooms and laboratory benches where space and accessibility matter. Its optical configuration supports quick visual measurement and simple documentation of findings, making it a pragmatic tool for incoming inspection, process checks and rework control. If there is any uncertainty about application suitability or additional technical requirements, tailored advice is available to ensure the instrument fits the intended workflow. Contact Metav Werkzeuge today for expert guidance on integrating the Euromex PB.5012 into existing inspection processes — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: PB.5012 Product type: Measuring microscope Brand: Euromex Magnification: 60× Reticle division: 0.02 mm Illumination: LED Core specifications Magnification: 60× Reticle division: 0.02 mm SKU / UID: PB.5012 Special features LED illumination Reticle (scale plate) with 0.02 mm divisions Compact bench-top format FAQ What magnification is available with this microscope? The Euromex PB.5012 offers 60× magnification, enabling clear inspection of small features and fine markings. How fine are the measurement divisions on the scale? The reticle fitted to the PB.5012 has 0.02 mm division spacing, allowing visual reading in increments of two hundredths of a millimetre. Is the illumination suitable for detailed inspection tasks? The PB.5012 uses LED illumination to provide steady, uniform lighting across the field, supporting consistent visual assessment. Can this instrument be used directly on a workshop bench? Yes; the compact design is intended for bench-top metrology and routine inspection in workshops and quality-control areas. How does the reticle help with measurement work? The integrated reticle gives immediate reference markings for dimensional comparison, simplifying quick checks without auxiliary measurement tools. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com