High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
60mm Plan Semi-Apochromatic Objective 100x/0.90 1mm Working Distance M25 Thread - Euromex
Take advantage of the combination of 100x magnification, a 0.90 numerical aperture and a compact 1 mm working distance for exceptionally detailed imaging; integrate the lens quickly via the M25 mount and order directly through Metav Werkzeuge or consult the technical team for compatibility. PL‑SAPOLRi 100x/0.90 plan semi‑apochromatic objective DX.7900-R (Euromex) The PL‑SAPOLRi 100x/0.90 objective DX.7900-R is an infinity‑corrected lens for 60 mm optical systems, optimised for high‑resolution close‑range observation with an M25 mount Infinity‑corrected optical design 100x magnification, 0.90 numerical aperture 1 mm working distance for close detail imaging M25 thread for standard objective holders High‑resolution detail where it matters The combination of 100x magnification and a 0.90 numerical aperture delivers superior resolving power for fine structural detail. A high numerical aperture increases light collection and improves contrast at high magnifications, which is particularly beneficial when resolving sub‑micrometre features. The corrected optics ensure a flat field across the image, so resolution and image uniformity are maintained from centre to edge, reducing the need for extensive post‑processing. This makes the objective suitable for demanding inspection tasks in laboratories, routine industrial inspection and advanced teaching environments. Compact integration on infinity‑corrected 60 mm systems Built for infinity‑corrected optical systems with a 60 mm tube specification, the lens mounts via an M25 thread for straightforward installation into compatible nosepieces. The 1 mm working distance provides a very close sample approach, enabling high‑NA performance, but also requires careful sample handling and stage adjustment. The objective is specified without cover glass correction, so it performs optimally in setups where either no cover glass is used or where the optical train does not demand additional cover glass compensation. System planners should verify mechanical clearance and optical compatibility when integrating the lens into existing assemblies. Stable colour rendition and suitability for unstained samples The plan semi‑apochromatic correction reduces chromatic aberration and supports even colour rendition across the field, improving the visibility of fine structures without aggressive digital correction. The designation "dye‑free" indicates suitability for imaging unstained or intrinsically contrasted specimens, where inherent optical contrast is preferred. The optical design therefore benefits workflows that require faithful morphology visualisation rather than colour enhancement. Built to professional tolerances, this lens offers consistent performance for repeated inspections and contributes to reproducible imaging results in production control and research applications. Contact Metav Werkzeuge today to discuss system compatibility and secure the Euromex PL‑SAPOLRi 100x/0.90 objective DX.7900‑R for precise, high‑resolution imaging in the laboratory or on the production floor Technical data Article number: DX.7900-R Product type: Objective / lens Manufacturer: Euromex Microscopen bv Core specifications Magnification: 100x Numerical aperture: 0.90 Working distance: 1 mm Mount thread: M25 Special features Infinity‑corrected, 60 mm Plan semi‑apochromatic correction Dye‑free objective No cover glass correction FAQ Is this objective compatible with standard infinity‑corrected microscopes? The PL‑SAPOLRi 100x/0.90 objective DX.7900‑R is specified for infinity‑corrected systems with a 60 mm tube specification; compatibility with the instrument must be confirmed by matching tube length and mechanical mount. Does the lens include cover glass correction? No — the DX.7900‑R is supplied without cover glass correction, so it is intended for use where a cover glass is not required or where the optical system provides the necessary compensation. What does the dye‑free designation mean for application? "Dye‑free" indicates suitability for imaging unstained or naturally contrasted samples; the objective preserves intrinsic specimen detail without reliance on staining for visibility. Can the objective be mounted on standard M25 nosepieces? Yes, the objective uses an M25 thread and fits holders and nosepieces designed for M25 objectives, subject to the instrument’s mechanical compatibility. How does the 0.90 numerical aperture affect imaging? A 0.90 numerical aperture increases light gathering and resolving capability at high magnification, improving contrast and the ability to resolve fine structures under appropriate illumination. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
60mm Transparent Plexiglass Stage Plate With StereoBlue Compatibility - Euromex
Take advantage of a clear acrylic stage plate with a precise 60 mm diameter and reliable fit for StereoBlue microscopes; the robust, transparent construction supports consistent specimen observation and simple replacement. Order genuine parts directly via Metav Werkzeuge or consult our specialists for compatibility advice. Transparent acrylic stage plate SB.9952 — 60 mm diameter, for StereoBlue microscopes (Euromex) The Transparent acrylic stage plate SB.9952 serves as a replacement stage insert for StereoBlue stereo microscopes, providing unobstructed specimen viewing and stable positioning for routine inspection and documentation. Transparent acrylic for clear viewing 60 mm diameter for small specimens Compatible with StereoBlue series Clear visual access for precise inspection The transparent construction ensures unobstructed sightlines to the specimen and supports accurate positioning under the optics. Made from acrylic (Plexiglas), the disc delivers consistent optical clarity that reduces light scattering and aids in accurate visual assessment. For users who rely on repeatable observation, the 60 mm diameter offers a defined working area that suits small parts, slides and components commonly encountered in delicate inspection tasks. This combination of visibility and defined working space helps maintain measurement and inspection quality in everyday use. Durable, easy-to-maintain support for routine workflows Acrylic offers a balance of toughness and lightness that makes the stage plate both durable and simple to handle. The material resists typical bench marks while remaining straightforward to clean with non‑abrasive agents; this supports a hygienic and reliable working surface without frequent replacements. The transparent finish also makes it easier to position transmitted light or ancillary lighting precisely beneath the specimen, improving contrast and image quality without complex adjustments. The result is a practical spare part that keeps inspection routines efficient and dependable. Direct compatibility and simple replacement procedure Designed for direct fitment with the StereoBlue range, the stage plate simplifies spare-part logistics and reduces downtime during maintenance. The plain circular design allows for quick removal and reinstallation on compatible stages, avoiding specialised tools or prolonged adjustments. Where documentation or imaging is required, the clear aperture and stable seating improve reproducibility between sessions. The compact format is particularly suitable for laboratories and workshops that value straightforward, rapid component replacement to maintain continuous operation. For reliable replacement parts from Euromex and fast delivery from Emmerich, contact Metav Werkzeuge for direct ordering or technical compatibility checks at info@metav-werkzeuge.com or call +49 2822 7131930 Product details Article number: SB.9952 Label: Transparent acrylic stage plate Dimensions & compatibility Diameter: 60 mm Compatible series: StereoBlue Cross-selling SKUs: SB.1302;SB.1302-P;SB.1402;SB.1402-P;SB.1702;SB.1702-P;SB.1703;SB.1703-P;SB.1902;SB.1902-P;SB.1903;SB.1903-P;SB.3903;SB.3903-P Materials & features Material: Acrylic (Plexiglas) Design: Circular stage insert Application: Replacement stage plate for stereo microscopes FAQ What size of specimen area does the stage plate provide? The stage plate offers a 60 mm diameter clear area suitable for small specimens and components commonly inspected with StereoBlue stereo microscopes. Is the plate compatible with all StereoBlue models? The stage plate is specified for the StereoBlue series; compatibility should be verified against the exact model variant when interchangeability is critical. How should the acrylic plate be cleaned to avoid damage? Clean the plate with a soft, lint-free cloth and mild, non‑abrasive cleaner; abrasive pads and strong solvents are not recommended to preserve optical clarity. Can the plate be used with transmitted light illumination? Yes, the transparent acrylic allows effective use of transmitted or oblique lighting beneath the specimen to improve contrast and imaging. Are replacement parts available through Metav Werkzeuge? Genuine Euromex replacement parts such as this stage plate (SB.9952) are available and can be ordered via Metav Werkzeuge; technical advisors can confirm fitment details. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
60x Plan Stress-Free PLPOLi Objective 0.85 NA, 0.17 mm Cover Glass Correction 0.14 mm Working Distance - Euromex
Take advantage of high optical performance and a precise cover glass correction to secure sharper polarisation images and reproducible inspection results. Order the objective directly via Metav Werkzeuge or consult Metav's specialists for specification checks and delivery. PLPOLi 60×/0.85 IOS objective — Plan, stress‑free optics for polarisation (Euromex) A PLPOLi 60×/0.85 IOS objective engineered for transmitted‑light polarisation microscopy on iScope systems, offering high resolution with 0.17 mm cover glass correction and a 0.14 mm working distance Plan, stress‑free optics for low birefringence 60× magnification with high light gathering 0.17 mm cover glass correction for standard slides 0.14 mm working distance for fine detail inspection Exceptional contrast and resolution for polarisation tasks The combination of a high numerical aperture (0.85) and true plan optics delivers superior image sharpness across the field, which is essential in polarisation applications where subtle differences in birefringence must be resolved. The design reduces stress‑induced optical artefacts, so the observed contrast originates from the sample rather than the lens. As a result, inspections that depend on accurate polarisation contrast—such as mineral identification, polymer analysis or thin film evaluation—benefit from more reliable, repeatable results and fewer ambiguous findings. Compact working distance tuned for high‑magnification imaging With a working distance of 0.14 mm and an integrated 0.17 mm cover glass correction, the lens is optimised for routine slide work and thin specimens where cover glass thickness is standardised. The short clearance promotes maximal resolution at high magnification, enabling fine feature recognition and precise focus control. While the small working distance requires careful sample handling, it ensures the objective delivers the best possible numerical aperture performance and image detail for demanding microscopy tasks. Engineered compatibility and straightforward integration Designed for the iScope platform and specified as an IOS‑compatible objective, this PLPOLi optic fits into established transmitted‑light polarisation setups without modification. The lens construction supports laboratory workflows where alignment repeatability and mechanical stability are priorities, helping to reduce setup time and minimise the need for frequent recalibration. Built with industry‑grade tolerances, the component contributes to a dependable inspection chain and consistent throughput in quality control environments. Procurement guidance and application suitability This objective is aimed at laboratories, material science departments and industrial quality teams that require high‑contrast polarisation imaging at 60× magnification. The combination of plan, stress‑free optics and standard cover glass correction makes the lens a pragmatic choice where accurate birefringence visualisation is required alongside straightforward sample preparation. Selecting this optic supports tighter process control and can reduce the incidence of rework by delivering clearer diagnostic images for decision making. Contact Metav Werkzeuge for delivery and technical confirmation of the Euromex iScope PLPOLi 60×/0.85 objective — Metav Werkzeuge will confirm compatibility and ensure timely supply from Emmerich Technical Data Article number: IS.7960-T Manufacturer: Euromex Product type: Objective / Lens Series: iScope Facts Magnification: 60× Numerical aperture: 0.85 Working distance: 0.14 mm Cover glass correction: 0.17 mm Special features Plan, stress‑free optics Designed for transmitted‑light polarisation microscopy Model: PLPOLi IOS compatibility FAQ What applications is this objective suitable for? This objective is intended for transmitted‑light polarisation microscopy; the Euromex iScope PLPOLi 60×/0.85 objective (SKU IS.7960-T) is well suited to mineralogy, polymer analysis and thin film inspection. Does the objective require a specific cover glass thickness? Yes, the optic is corrected for a 0.17 mm cover glass; the cover glass correction built into the PLPOLi 60×/0.85 objective ensures optimal imaging when standard slides are used. How does the short working distance affect sample handling? The 0.14 mm working distance provides maximum resolution at high magnification but necessitates careful sample mounting; the Euromex objective is designed for precision handling typical in laboratory workflows. Will this objective work in existing iScope transmitted‑light setups? The lens is designed for the iScope series and IOS compatibility, so the PLPOLi 60×/0.85 objective integrates into standard transmitted‑light polarisation configurations without mechanical modification. What optical benefits does a stress‑free plan objective provide? A stress‑free, plan objective minimises lens‑induced birefringence and delivers a flat field, producing truer polarisation contrast and consistent resolution across the image. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
650mm Standard Stand For MZ.4707, Ø25mm Pole, 380x250mm Base - Euromex
Robust mounting and a compact footprint make stable inspection and accessory positioning straightforward; the 650 mm vertical pole and 25 mm diameter offer reliable compatibility with common microscopy fittings. Order the stand directly via Metav Werkzeuge or consult the Metav specialists for application advice. Standard stand for MZ.4707 – Stand / Holder with 650 mm pole, 25 mm diameter (Euromex) The Standard stand for MZ.4707 provides a stable mounting solution for microscopy and workshop inspection tasks, designed to accept the MZ.4707 and related accessories. Stable base 380 x 250 mm 650 mm vertical pole, 25 mm diameter Compatible with MZ.4707 microscope Stable positioning for repeatable inspection results The design focuses on a stable support column to ensure consistent alignment during precision inspection. A 650 mm pole height gives an extended working envelope for taller samples or auxiliary attachments, while the 25 mm diameter provides a rigid connection that limits lateral play. These dimensions reduce the need for repeated repositioning, enabling more efficient measurement and documentation workflows. The combination of an elevated column and defined connection diameter supports repeatable setups for serial inspection or assembly tasks, translating into measurable time savings on the shop floor. Compact footprint that maximises bench space A 380 x 250 mm base footprint keeps the stand compact enough for crowded benches and modular workstations. The reduced base area allows multiple instruments or fixtures to be arranged nearby without compromising reach or stability. This is particularly useful in lab benches or small production cells where space optimisation matters. The compact layout makes the stand a practical choice for bench-top inspection, maintenance stations and environments where several optical or measurement devices must operate in close proximity. Seamless integration with MZ.4707 and accessory systems Compatibility with the MZ.4707 is a core design consideration, enabling direct mounting of the microscope head or compatible holders. The uniform 25 mm tube diameter facilitates the use of standard clamps and accessory adaptors that accept this size, simplifying integration into existing setups. Where accessories such as illumination mounts or camera adapters are used, the stand permits secure attachment with minimal adjustment. This plug-and-play approach reduces installation time and supports quick reconfiguration for different tasks. Practical benefits for workshop and laboratory use The stand delivers pragmatic advantages: a defined pole height and diameter that support modularity, a compact base for flexible placement, and direct compatibility with a widely used microscope model. These attributes contribute to smoother workflows, fewer alignment interruptions and a clear path to consistent inspection routines. For teams seeking a straightforward mounting solution that fits established microscopy tooling, the stand offers a predictable and easy-to-integrate option. Contact Metav Werkzeuge for personalised advice on integrating the Euromex stand into the existing setup or for recommendations on compatible accessories; Metav Werkzeuge can advise from stock and technical know-how. Technical Data Article number: MZ.4714 Description: Standard stand for MZ.4707, pole H=650 mm, D=25 mm, base 380 x 250 mm Product type: Stand / Holder Manufacturer: Euromex Dimensions / Core Data Pole height: 650 mm Pole diameter: 25 mm Base footprint: 380 x 250 mm Compatibility / Features Compatible with MZ.4707 Recommended accessories: MZ.4707; MZ.4716 Intended for microscopy mounting and accessory support FAQ What are the exact dimensions of the base and pole? The base measures 380 x 250 mm and the vertical pole height is 650 mm with a 25 mm diameter according to the product specification for MZ.4714. Can the stand accept common 25 mm accessory clamps? Yes, the 25 mm pole diameter is intended to accommodate accessories and clamps designed for 25 mm tube fittings, enabling straightforward integration with compatible mounts. Is this stand suitable for the MZ.4707 microscope? The Standard stand for MZ.4707 is specified for direct compatibility with the MZ.4707 and supports the mounting requirements of that model. Will the stand fit on a crowded bench or small workstation? The 380 x 250 mm base footprint is deliberately compact to allow placement on benches with limited space while preserving a usable working area. Are any additional accessories included with the stand? The product specification lists compatibility and recommended SKUs (MZ.4707; MZ.4716) but does not state inclusion of extra accessories; consult the Metav Werkzeuge listing for accessory packaging details. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
6x Aplanatic Loupe No Lighting, Handheld Magnifier - Euromex
High-precision visual checks become simpler with a compact optical solution: the aplanatic design reduces edge distortion while the clear 6x magnification reveals fine defects for dependable inspection results. Combine optical clarity and straightforward handling for efficient quality control; order the Aplanatic magnifier 6x directly via Metav Werkzeuge or ask our consultants for tailored advice. Aplanatic magnifier 6x — Handheld inspection magnifier by Euromex, corrected optics The Aplanatic magnifier 6x is a compact optical aid for detailed visual inspection and quality control in workshops, laboratories and production lines Aplanatic optics for low distortion 6x magnification for clear detail Robust construction for workshop use Consistent optical correction for reliable inspection The core advantage of the aplanatic design is reduced spherical aberration, which preserves sharpness across the entire field of view. This optical correction means that edges and central details remain in focus together, improving defect detection in components and assemblies. For engineers and inspectors who rely on visual verification, the result is a clearer image with fewer false positives caused by blurring at the lens periphery. Fewer rechecks translate into steadier throughput and more predictable quality control routines. Magnification tuned to practical quality tasks With 6x magnification, this loupe brings small features into clear view while retaining a usable field of view, making it suitable for tasks such as solder-joint inspection, surface-finish checks and fine assembly. The balance between magnification and working distance allows operators to maintain comfortable hand positioning and easier manipulation of parts under inspection. For routine visual checks, the optical power supports quicker identification of scratches, burrs or alignment issues without needing complex imaging equipment. Streamlines inspection workflows and decision-making As an optical aid for visual assessment, the device reduces the time spent on preliminary checks and helps focus metrology resources where they are most needed. By catching visible defects early, downstream processes are less likely to be interrupted, which supports continuous production. The simplified handling and direct visual feedback also aid staff training and standard operating procedures, promoting a consistent inspection practice across shifts and teams. Practical procurement choice for workshop inventories Small, robust and straightforward to use, this magnifier suits procurement strategies that prioritise dependable tools with low operational complexity. As an entry-level precision inspection instrument, it complements more advanced measuring equipment by offering a fast, low-friction method for everyday visual verification. For facilities seeking to standardise basic inspection tools, the magnifier is a pragmatic addition to supply lists and toolkits. Contact Metav Werkzeuge for personalised advice on integrating the Euromex Aplanatic magnifier PB.5016 into inspection routines and for assistance with procurement and delivery from our Emmerich site Technical data Article number: PB.5016 Product: Aplanatic magnifier 6x Type: Magnifier Manufacturer: Euromex Facts Magnification: 6x Special features Aplanatic optical correction Intended for visual inspection and quality control FAQ What magnification does this magnifier provide? The Euromex Aplanatic magnifier PB.5016 provides 6x magnification, designed to reveal fine detail for inspection tasks. What does "aplanatic" mean in practice? Aplanatic optics reduce spherical aberration so that the image remains sharp across the field of view, helping to detect defects at the edges as well as the centre. Is this tool suitable for electronics and solder inspection? Yes, the 6x power and corrected optics make the device suitable for electronics assembly and solder-joint inspection, where clear detail and minimal distortion are important. Can this magnifier be used alongside other measuring equipment? The magnifier is intended as a visual inspection aid and complements formal metrology tools by enabling quick, on-the-spot checks before lab measurements. Which environments is the magnifier intended for? The design suits workshop and laboratory environments where rapid visual assessment is required as part of quality control and assembly processes. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
7 W Fluorescent Replacement Lamp For NexiusZoom GEMF, Fluorescent Incident Illumination - Euromex
Take advantage of a compact 7 W replacement that restores reliable incident illumination and matches NexiusZoom GEMF mounts; benefit from consistent, energy-efficient light and rapid availability through Metav Werkzeuge for workshop continuity or consult the team for technical guidance. 7 W fluorescent replacement lamp for NexiusZoom GEMF by Euromex — compact incident illumination The 7 W fluorescent replacement lamp for NexiusZoom GEMF provides incident fluorescent light tailored for inspection and documentation tasks on compatible NexiusZoom GEMF stands. 7 W energy-efficient fluorescent output Designed for NexiusZoom GEMF stands Consistent incident illumination for inspection Compatible spare part SKU NZ.9962 Stable, precise light for repeatable inspection results The 7 W fluorescent tube restores a uniform field of incident illumination, which is essential when assessing surface details or photographing specimens under a stereo inspection system. Low power consumption combines with steady luminous output to reduce thermal drift and visual artefacts, supporting precise inspection and repeatability. The lamp is intended as a direct replacement, maintaining the original light geometry so measurement conditions remain unchanged and results stay comparable across shifts and operators. Quick compatibility and straightforward replacement Designed specifically for the GEMF series of stands, the lamp aligns mechanically and optically with the NexiusZoom housing to ensure a straightforward swap-out procedure. The compact form and standardised connectors mean downtime is minimised: remove the old tube, fit the replacement and resume inspection. Clear alignment and matching output characteristics mean recalibration of imaging settings is rarely necessary, which preserves throughput in production and reduces inspection delays. Operational advantages and reliable supply chain As an original-equipment replacement from Euromex, the lamp supports consistent working conditions and predictable maintenance planning. The modest 7 W rating contributes to lower running costs and reduced heat load at the inspection site, while the standardised design simplifies inventory management for spare-part stocking. For procurement and ongoing availability, Metav Werkzeuge combines a wide product range and logistical experience to supply this replacement reliably from Emmerich; this centralised provisioning helps maintain workshop uptime and reduces supplier complexity. For expert advice on suitability and ordering of the Euromex replacement lamp, contact Metav Werkzeuge for product availability and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: NZ.9962 Label: 7 W fluorescent replacement lamp for NexiusZoom GEMF Manufacturer: Euromex Facts Power: 7 W Special features Lighting mode: fluorescent incident illumination Compatible with: GEMF stands Cross-sell SKUs: NZ.1702-GEMF;NZ.1703-GEMF;NZ.1902-GEMF;NZ.1903-GEMF Product type: fluorescent replacement lamp FAQ Is this lamp compatible with NexiusZoom GEMF stands? Yes. The NZ.9962 replacement lamp is designed for use with NexiusZoom GEMF stands and matches the original incident illumination geometry. What is the power consumption of the replacement lamp? The replacement tube consumes 7 W, providing a balance between low energy use and stable illumination for inspection tasks. Does the lamp require additional adapters or modifications? No additional adapters are indicated for the standard GEMF mounting; the tube is specified as a direct replacement for NexiusZoom GEMF setups. Are there recommended spare-part references for related consumables? Related cross-sell SKUs include NZ.1702-GEMF, NZ.1703-GEMF, NZ.1902-GEMF and NZ.1903-GEMF for complementary lighting and spare components. Who manufactures this replacement lamp? The lamp is supplied by Euromex as an original-equipment replacement for NexiusZoom GEMF systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7" BioBlue Microscope 4/10/S40 Objectives Cross Table Two‑Colour 1W LED, USB‑C Power - Euromex
Take advantage of the combination of a built-in display, versatile objective set and flexible power options for clear inspection and fast decision‑making in the workshop or classroom. Order the BioBlue BB.4220‑LCD directly via Metav Werkzeuge or ask the consultants for tailored supply from Emmerich. BioBlue BB.4220-LCD microscope with 7-inch LCD and SMP objectives by Euromex The BioBlue BB.4220-LCD is a compact digital microscope designed for direct observation, documentation and routine inspection in education, laboratory benches and light industrial applications 7-inch LCD for immediate digital observation SMP objectives 4×, 10× and S40 for versatile magnification Cross stage for precise sample positioning Dual‑tone 1 W LED with battery and USB‑C power Instant visual feedback with an integrated screen for faster workflows The built‑in 7-inch LCD delivers immediate visual feedback, removing the need for a separate monitor or camera setup and thereby speeding up routine inspections. The integrated display supports clear image interpretation on the bench, while USB‑C connectivity enables direct power from standard adapters; a 3 AA battery option adds true portability. This combination of features reduces setup time and simplifies documentation, which benefits lab technicians and instructors who need repeatable, reliable results without complex cabling. Flexible optics and precise staging for repeatable measurements Equipped with SMP objectives in 4×, 10× and S40 configurations, the instrument covers initial overview scans through to detailed observation without swapping principal components. The cross stage provides controlled lateral adjustment for accurate sample positioning, making fine alignment straightforward during teaching demonstrations, component inspection or biological observation. These optical choices translate into reduced handling time and fewer imaging errors, supporting efficient routine workflows in both educational and light industrial settings. Consistent illumination and a design built for everyday use The 1 W two-colour LED illumination offers balanced light quality for contrasting specimens and colour differentiation during visual assessment. Combined with compact construction, the device is inherently portable and well suited to shared workstations or mobile inspection rounds. As an offering from Euromex, the unit follows established optical standards and is configured to integrate with common bench environments, ensuring consistent performance and usability across multiple users and locations Contact Metav Werkzeuge for procurement advice or to arrange delivery from Emmerich; their consultants can confirm compatibility with existing equipment and discuss volume supply options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BB.4220-LCD Brand: Euromex Product type: microscope Model series: BioBlue Facts Screen diagonal: 7 inches Objective magnifications: 4× / 10× / S40 Illumination power: 1 W two‑colour LED Power options: 3 AA batteries; external USB‑C 5 Vdc via 100–240 Vac adapter Special features Built‑in 7‑inch LCD display SMP objective set (4×, 10×, S40) Cross stage for precise positioning Dual‑tone LED illumination Portable design suitable for education and routine inspection FAQ What magnification range does the microscope cover? The BioBlue BB.4220‑LCD delivers magnifications via SMP objectives at 4×, 10× and S40, providing a practical range for overview inspection and closer examination of small details. Can the instrument operate away from a mains supply? Yes, the device supports operation from 3 AA batteries for mobile use and also accepts external power via USB‑C (5 Vdc) with a 100–240 Vac adapter for bench work. How does the two‑colour LED benefit visual inspection? The 1 W two‑colour LED permits adjustment of colour tone to improve contrast for different specimen types, aiding clearer differentiation of structures during visual assessment with the microscope. Is the cross stage suitable for precise sample alignment? The supplied cross stage enables controlled lateral movement to position specimens accurately, which is particularly useful during teaching demonstrations and repeatable inspection tasks. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
7" BioBlue Microscope 4/10/S40x Objectives Dual-Colour LED Lighting, USB-C Power - Euromex
Take advantage of the combination of an integrated 7-inch LCD, a compact objective set and flexible power options for immediate, group-friendly observation and reliable field use. Order the BioBlue BB.4200-LCD microscope directly via Metav Werkzeuge or ask our consultants if needed. BioBlue BB.4200-LCD microscope with 7-inch LCD and 4x/10x/40x objectives by Euromex BioBlue BB.4200-LCD is a compact microscope designed for education, routine laboratory checks and portable field observation with an integrated display for shared viewing Integrated 7-inch LCD display Interchangeable 4x/10x/40x objectives Stage with specimen clamps for secure positioning Dual‑colour 1 W LED illumination; battery or USB power Instant digital viewing for group work and demonstrations The 7-inch LCD provides an immediate, eyepiece‑free view that simplifies demonstrations and collaborative inspections. With the supplied 4x, 10x and 40x objectives, the instrument supports a clear magnification range suitable for biological samples, teaching tasks and routine inspections. The combination of an integrated screen and objective set reduces the need for auxiliary cameras or adapters, which shortens setup time and increases throughput during group sessions. The digital viewing approach also minimises eye strain during prolonged observation. Reliable illumination and versatile power options for continuous operation Equipped with a 1 W dual‑colour LED, the device offers controllable contrast and colour balance that help to reveal structural detail in translucent and stained specimens. Illumination runs from the on‑board LED, while the power concept permits both mobile and mains operation: 3 AA batteries, external 5 Vdc via USB‑C and a 100–240 Vac adapter are supported. This versatility ensures work continuity on the bench, in classrooms or on site, and reduces downtime when external power is variable or unavailable. Secure specimen handling and ergonomic compactness The furnished stage with specimen clamps keeps slides steady during magnified observation or image capture, which improves measurement consistency and repeatability for routine checks. The instrument’s compact form factor and integrated display make it straightforward to relocate between benches or storage without extensive dismantling. The overall design supports quick teaching cycles and efficient sample throughput while maintaining reliable optical performance. Contact Metav Werkzeuge for a tailored recommendation on the BioBlue BB.4200-LCD and to arrange immediate delivery or technical guidance from our Emmerich team — info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: BB.4200-LCD Model series: BioBlue Product type: microscope Manufacturer: Euromex Facts Screen diagonal: 7 inches Objectives: 4x / 10x / 40x Illumination power: 1 W USB supply voltage: 5 Vdc Special features Integrated LCD screen Stage with clamps Dual‑colour LED illumination Battery operation via 3 AA cells External USB‑C and 100–240 Vac adapter compatibility FAQ What magnifications are available with this microscope? The instrument includes 4x, 10x and 40x objectives, which provide a practical range for teaching, basic laboratory checks and routine observation on the BioBlue BB.4200-LCD microscope. Can the device be used without a mains supply? Yes, the BioBlue BB.4200-LCD supports mobile operation via 3 AA batteries and can also be powered externally through 5 Vdc USB‑C, allowing flexible deployment away from mains sockets. Is the lighting adjustable for different sample types? The microscope features a 1 W dual‑colour LED that allows contrast and colour adjustments to suit translucent tissues, stained slides or inspection tasks, enhancing detail visibility. Is the instrument suitable for classroom demonstrations? The integrated 7-inch LCD and stable stage with clamps make the device well suited to classroom demonstrations and small‑group observation sessions using the BioBlue BB.4200-LCD. Are the objectives changeable or fixed? The supplied objective set (4x, 10x, 40x) is provided for standard observation ranges; the arrangement enables rapid switching to adapt to the required magnification. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
7" MicroBlue Microscope Achromatic 4/10/S40x Objectives 1W Bicolour LED, Battery/USB-C Powered - Euromex
Combining a 7-inch integrated LCD with achromatic 4/10/40x DIN objectives, this compact instrument enables immediate visual inspection and reliable documentation at the benchtop; dual power options — three AA batteries or external 5 V DC via USB-C — provide uninterrupted use in the workshop or classroom. Order the instrument directly via Metav Werkzeuge or consult our specialists for tailored advice. MicroBlue microscope MB.1001-LCD by Euromex — 7-inch LCD with achromatic 4/10/40x optics MicroBlue microscope MB.1001-LCD is a compact benchtop microscope designed for routine inspection and teaching environments, combining a fixed 7-inch display with versatile objective magnifications for clear, ready-to-view samples 7-inch integrated LCD display Achromatic 4/10/40x DIN objectives Bicolour 1 W LED illumination Battery or USB-C powered operation Quick, accurate inspection with an integrated display The built-in 7-inch LCD provides an immediate visual output without the need for a separate monitor or eyepiece camera, speeding up routine inspections and collaborative checking. The integrated screen is particularly useful for demonstrations and shared workstations where fast visual confirmation is required; the large display simplifies comparison of specimens and removes the ergonomic constraints of prolonged eyepiece use. The instrument supports both battery and mains operation, reducing downtime and allowing flexible placement at the workbench or in mobile inspection setups. Optical reliability for clear, consistent images Optical performance is based on achromatic objectives in 4x, 10x and 40x magnifications mounted to DIN 35 mm standards, giving low chromatic aberration and reliable contrast across common specimen types. Achromatic correction reduces colour fringing and improves edge sharpness, which benefits both educational demonstrations and routine laboratory checks. The objective range covers coarse overview through higher-detail observation, making the instrument suitable for general microscopy tasks in workshops, schools and light industrial inspection contexts. Adaptable lighting and secure sample handling for repeatable results Illumination is provided by a 1 W bicolour LED, offering selectable colour temperature to enhance contrast for different materials and staining conditions; this aids visual differentiation and reduces the need for external filters. A stable specimen stage with secure sample placement ensures reproducible framing for sequential observations or image capture. Together, the controlled lighting and reliable stage mechanics support consistent inspection routines and straightforward documentation of findings. Portable, straightforward power and practical workflow benefits The unit operates wirelessly with three AA batteries for field or classroom use and accepts external power via USB‑C 5 V DC with a 100–240 Vac mains adapter for continuous laboratory operation. This dual-power approach allows uninterrupted workflow: battery power for mobility and quick checks, USB‑C mains for longer sessions or where constant illumination is required. The compact form factor and simple controls mean the instrument integrates easily into shared workspaces, reducing setup time and enabling more tasks to be completed at the bench. For flexible benchtop imaging and dependable day-to-day inspections, order the Euromex MicroBlue MB.1001-LCD via Metav Werkzeuge or contact Metav Werkzeuge for expert guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: MB.1001-LCD Brand: Euromex Product type: Microscope Model series: MicroBlue Display diagonal: 7 inches Facts Objective magnifications: 4x / 10x / 40x Objective standard: DIN 35 mm Illumination: 1 W bicolour LED Power options: 3 × AA batteries; external 5 V DC via USB‑C Mains adapter range: 100–240 Vac Special features Achromatic objectives Fixed integrated LCD screen Specimen stage included Battery and USB‑C operation Designed for education, workshops and light industrial inspection FAQ Which magnifications are available with this microscope? The MicroBlue MB.1001-LCD is supplied with achromatic objectives at 4x, 10x and 40x, offering an effective range for overview and detailed observation. How can the instrument be powered for continuous use? Continuous operation is achieved via the external 5 V DC USB‑C input with a 100–240 Vac mains adapter; battery power (3 AA cells) provides wireless operation for mobility. Is the illumination adjustable to improve contrast on different materials? Yes, the instrument uses a 1 W bicolour LED illumination system that provides selectable colour temperature to enhance contrast for various specimen types. Can the MicroBlue MB.1001-LCD be used for teaching and demonstrations? The integrated 7-inch LCD and easy-to-use controls make the instrument well suited to teaching, demonstrations and collaborative inspections in small groups. Are the objectives compatible with standard DIN fittings? The objectives are mounted to DIN 35 mm standards, ensuring compatibility with common optical accessories and replacement objectives. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
75 x 25mm Glass Microscope Slides Single-Sided Frosted Edges 1440-Pack - Globe Scientific
Take advantage of the combination of soda-lime glass construction, pre-cleaned readiness and frosted one-side labelling for reliable sample preparation and efficient laboratory workflows; order the slides via Metav Werkzeuge or contact the consultants for tailored supply options. Globe Scientific Diamond Essentials Slide 1304N — microscope slides with frosted side and ground edges The Globe Scientific Diamond Essentials Slide 1304N is a standard microscope slide designed for routine laboratory use, combining robust soda-lime glass with a single frosted surface for permanent marking and ground edges for safer handling 90° corners and ground edges One-side frosted for clear labelling Pre-cleaned and ready to use Soda-lime glass, durable optical clarity Improved sample preparation for consistent results The slides are made from soda-lime glass, offering a stable substrate for typical brightfield and transmitted-light work; the material ensures optical clarity while maintaining cost-effective durability. Being pre-cleaned and fit for immediate use reduces preparation steps and lowers the risk of contamination during routine staining or mounting. This leads to a measurable improvement in workflow efficiency and repeatability when many specimens are processed in succession. Safer handling and unambiguous labelling in the lab Designed with 90° corners and ground edges, the slides combine handling safety with convenience: chamfered edges lower the chance of accidental nicks while still fitting securely into slide holders and racks. The frosted side provides a reliable surface for pen or pencil marking, facilitating permanent labelling of samples and minimising mix-ups during multi-sample procedures. These features support orderly bench practices and help maintain chain-of-custody for critical samples. Reliable optical performance for standard microscopy As conventional microscope slides, these items deliver flat, uniform surfaces that support even specimen mounting and consistent focal planes. The combination of material quality and precision finishing contributes to dependable image reproduction under common light microscopes. The slides are suitable for standard staining techniques and cover-slip mounting, offering predictable results that assist both qualitative inspection and documented imaging. Efficient supply and storage for busy laboratories Packaging and product finishing have been conceived for continuous laboratory operation: items arrive pre-cleaned and are ready to integrate into existing sample-preparation routines without additional conditioning. The slide format and finish simplify stock rotation and storage on benches or in racks, supporting predictable inventory planning for workshops, teaching labs and clinical or research facilities that rely on uninterrupted access to consumables. Contact Metav Werkzeuge today for supply and logistical options for the Globe Scientific Diamond Essentials slides and to discuss tailored carton quantities and delivery schedules Technical data Article number: 1304N Label: Globe Scientific Diamond Essentials Slide 1304N Product type: Microscope slides Manufacturer item number: 1304N Manufacturer: Globe Scientific Model series: Diamond Essentials Material: Soda-lime glass Colour: Orange Packaging unit: Carton: 1440 pieces Facts Corner angle: 90° Packaging: Carton format Surface finish: One-side frosted Edge finish: Ground edges Special features Pre-cleaned and ready to use One-side frosted for marking Ground edges for safer handling Durable optical clarity for routine microscopy FAQ Are the slides supplied ready for immediate use? Yes. The Globe Scientific Diamond Essentials slides are supplied pre-cleaned and are ready for immediate use in routine sample preparation. What material are the slides made of and what does that mean for imaging? The slides are produced from soda-lime glass, which provides consistent flatness and optical clarity suitable for standard light microscopy and typical staining protocols. How can samples be labelled reliably on these slides? Each slide has a frosted side that accepts pencil and many permanent inks, enabling clear, long-lasting labelling of specimens and easier sample identification. Are the edges safe to handle in a busy laboratory environment? Yes. The slides feature ground edges and 90° corners to reduce the risk of handling injuries and to ensure secure placement in holders and stages. What packaging format is used for bulk supply? The slides are supplied in laboratory-friendly cartons designed to support efficient storage and stock rotation in routine workflows. Manufacturer: Globe Scientific; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Diamond White Glass Microscope Slide Charged Matted Label, 1440 Slides Carton - Globe Scientific
Take advantage of the combination of consistent sample thickness, low autofluorescence and a ready-to-use finish for reliable microscopy results; order directly via Metav Werkzeuge or consult our specialists for delivery and technical advice. Globe Scientific Diamond White Glass slide 1358G — white glass microscope slide with frosted label and pre-cleaned finish A ready-to-use Globe Scientific Diamond White Glass slide 1358G designed for routine and fluorescence microscopy, offering consistent thickness, a frosted labelling field and ground edges for safe handling Low autofluorescence white glass Frosted labelling field for clear marking Ground edges and 90° corners for safety Pre-cleaned and charged surface for adherence Consistent imaging quality through stable glass composition The Diamond White Glass series uses white glass formulated for low autofluorescence, which reduces background signal in fluorescence applications and improves image clarity. Uniform glass thickness ensures even focal planes across specimens, minimising refocusing during slide scanning and speeding up routine inspections. The slides' glass composition also supports reduced surface oxidation, contributing to long-term consistency in optical performance. Practical handling and lab workflow benefits Each slide is supplied with ground edges and precise 90° corners, reducing the risk of cuts and ensuring reliable fit in racks and automated carriers. The frosted labelling field allows clear, permanent marking with pencils or resistant inks for unambiguous specimen identification. Supplied pre-cleaned and charged, the slides are ready for immediate use, shortening preparation time and improving sample adhesion where required, which helps maintain throughput in busy laboratories. Packaging and operational advantages for the laboratory Supplied in a bulk carton of 1440 slides, the packaging supports sustained workflows and reduces the frequency of reordering for high-volume facilities. The robust carton format eases storage and inventory management in laboratory environments. Choosing slides with a charged finish and controlled surface chemistry simplifies adhesion for many routine stains and mounting media, contributing to more reproducible sample preparation and fewer repeats. For reliable, low‑autofluorescence slides from Globe Scientific, contact Metav Werkzeuge in Emmerich for stock availability and expert technical advice via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 1358G SKU: 1358G Product type: Microscope slide Series: Diamond White Glass Material: White glass Facts Packaging: Carton — 1440 pieces Special features Low autofluorescence Uniform thickness Ground edges and 90° corners Frosted labelling field Charged surface Pre-cleaned and ready to use Glass composition for low oxidation Colour: Green FAQ Are these slides suitable for fluorescence microscopy? Yes. The Diamond White Glass slides feature low autofluorescence glass composition, which reduces background signal and is suitable for fluorescence applications. Do the slides arrive ready to use or is cleaning required? The slides are supplied pre-cleaned and charged, meaning they are ready for immediate use in routine preparations. What safety and handling features are included? The slides have ground edges and precise 90° corners to reduce the risk of cuts and to ensure compatibility with standard slide holders and carriers. How are specimens labelled on these slides? Each slide includes a frosted labelling field designed for clear, legible marking using pencils or laboratory-grade inks. What is the standard packaging quantity for these slides? The slides are packed in a carton of 1440 pieces, suitable for high-volume laboratory use. Manufacturer: Globe Scientific; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
76 x 26 mm Microscope Slide Ground Edges 50 Pack - Euromex
Take advantage of the combination of standard dimensions, safer handling and reliable supply for uninterrupted laboratory work; order directly via Metav Werkzeuge or consult our specialists for further technical advice. Microscope slides 76 x 26 mm — Euromex slides with ground edges A microscope slide 76 x 26 mm engineered for routine laboratory sample mounting and secure handling in teaching, clinical and research settings Standard 76 x 26 mm dimensions Ground edges for safe handling Clear surface for consistent imaging Pack of 50 slides Consistent format that fits established workflows The 76 x 26 mm format ensures compatibility with the majority of stage clips, slide holders and automated feeders used across laboratories and educational settings. By adopting a standard size, laboratory processes are simplified and throughput becomes more predictable, supporting faster sample processing and easier integration into existing equipment. This standardisation reduces setup time and contributes to a smoother workflow in both routine and high-volume environments. Safer handling thanks to ground edges Slides with ground edges reduce the risk of cuts during handling and preparation, improving safety for technicians and students alike. The edge finish also minimises the likelihood of chipping at the slide margins, which helps preserve specimen integrity and prevents contamination from glass fragments. This practical safety feature supports a cleaner workspace and lowers the risk of accidental sample loss during staining or mounting procedures. Reliable optical plane for repeatable imaging A flat, uniform surface promotes consistent imaging and reproducible results when aligning specimens and focussing under transmitted light. Reliable slide flats help maintain even specimen thickness and reduce artefacts that can affect microscopic observation. For laboratories aiming for dependable documentation and comparison across runs, this physical consistency is a straightforward way to enhance data quality without complex adjustments. Practical packaging and dependable supply chain Supplied in a pack of 50, the slides are presented for easy storage and inventory control, reducing the frequency of reorders and optimising bench stock management. Combined with Metav’s logistics approach from Emmerich, customers benefit from dependable distribution and a transparent procurement experience. This logistical reliability supports uninterrupted laboratory operation and fewer administrative disruptions. Contact Metav Werkzeuge for advice on supply options and technical suitability; benefit from fast, reliable delivery and expert consultation from our Emmerich hub Technical data Article number: PB.5155 Product type: Microscope slide Label: Objektträger 76 x 26 mm, geschliffene Kanten, 50 Stück je Packung Facts Dimensions: 76 x 26 mm Quantity: 50 per pack Special features Ground edges Brand: Euromex FAQ What are the exact dimensions of these slides? The Euromex microscope slides PB.5155 measure 76 x 26 mm, a standard format compatible with most microscopes and slide holders. Are the edges safe for routine handling? Yes, the slides feature ground edges, which reduce the risk of cuts and chipping during preparation and handling. How many slides are included per pack? Each pack contains 50 slides, supplied together for convenient storage and inventory control. Do these slides fit automated feeders and standard stage clips? The 76 x 26 mm format is designed to fit standard stage clips and most automated feeding systems used in teaching and routine laboratory environments. What are the typical applications for these slides? These slides are suitable for general specimen mounting, staining procedures and teaching demonstrations where a standard, reliable slide format is required. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
76 x 26mm Diamond White Glass Microscope Slide With Frosted Label Field, Pre-Cleaned Pack 1440 - Globe Scientific
Take advantage of the consistent imaging performance and ready-to-use preparation offered by the slides’ low autofluorescence and matt labelling field; combined with bulk packaging for steady supply, this supports uninterrupted laboratory workflows. Order via Metav Werkzeuge or contact our consultants for tailored delivery options. Globe Scientific Diamond White Glass microscope slides 1384-50P — pre-cleaned white glass with matt labelling field A set of Diamond White Glass microscope slides designed for routine and fluorescence microscopy, with chamfered edges and a pink tint for easy visual identification Pre-cleaned white glass, low autofluorescence Matt labelling field for clear marking Chamfered edges and corners for safe handling Uniform thickness for consistent focal plane Carton: 1440 slides per carton Reliable imaging with reduced background noise The white glass composition offers low autofluorescence, which reduces background signal during brightfield and fluorescence observation and improves contrast for stained specimens. Uniform thickness across the batch ensures a consistent optical path and stable focus, supporting reproducible image capture and reliable measurements. These characteristics translate directly into fewer retakes and more efficient microscopy workflows. Safer handling and clearer sample identification Slides feature chamfered edges and corners, which lower the risk of micro-cuts during preparation and handling, while the matt labelling field provides a high-contrast area for pencil or ink marks that remain legible after staining. Clear marking and safer handling speed up sample processing and reduce the chance of mix-ups, contributing to better traceability and a calmer lab environment. Ready for immediate use and optimised for supply continuity Delivered pre-cleaned and ready to use, the slides remove a preparatory step from routine procedures, saving time across repeated sample runs. Supplied in bulk—1440 per carton—the packaging is aimed at facilities that require dependable stock levels to avoid interruptions. The combination of ready-to-use quality and large carton sizes supports cost-effective procurement and streamlined inventory management. Material stability and application scope The glass composition is formulated for reduced oxidation and offers a uniform surface suited to a wide range of staining and mounting techniques. The pink tint helps with quick visual sorting without affecting optical clarity. These specimen slides are appropriate for general microscopy tasks where low background fluorescence and reliable flatness are advantageous, including histology, cytology and routine laboratory examinations. For dependable slide performance and continuous supply, contact Metav Werkzeuge to secure Globe Scientific Diamond White Glass slides — email info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and delivery coordination Technical Data Article number: 1384-50P SKU: 1384-50P Brand: Globe Scientific Product type: Microscope slides Series: Diamond White Glass Facts Carton quantity: 1440 slides Special features Material: white glass Colour: pink Pre-cleaned and ready to use Chamfered edges and corners Matt labelling field Low autofluorescence Uniform thickness Glass composition for reduced oxidation FAQ Are these slides suitable for fluorescence microscopy? The Globe Scientific Diamond White Glass slides are made from white glass with low autofluorescence, making them suitable for fluorescence applications where background signal must be minimised. Is any cleaning required before use? No. The slides are pre-cleaned and ready to use, which eliminates an initial cleaning step for standard specimen preparation. What is the packaging size and how does it support lab supply? Slides are supplied in a carton of 1440 slides, designed to maintain stock continuity for high-throughput laboratories. Will the pink tint affect imaging quality? The subtle pink colour is intended for identification and does not compromise optical clarity; the uniform thickness maintains consistent focal performance for imaging. Can these slides be used with standard stains and mounting media? Yes. The glass composition is formulated for stability and reduced oxidation, and it is compatible with common staining and mounting techniques for routine microscopy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
76 x 26mm Glass Microscope Slide Frosted One Side, 90° Corners, Bevelled Edges, Pack 1440 - Globe Scientific
Reliable laboratory performance meets practical handling: the pre-cleaned soda-lime glass slides with polished edges and a surface **frosted onone-side ** provide ready-to-use convenience and safer handling. Order the slides directly via Metav Werkzeuge or ask our consultants for technical details. Globe Scientific Diamond Essentials Microscope Slides 1304 — soda-lime glass, frosted on oneside frosted Globe Scientific Diamond Essentials Microscope Slides 1304 are standard laboratory slides manufactured from soda‑lime glass, featuring 90° corners, ground edges and a single frosted side to support secure labelling and routine microscopic work Soda-lime glass, pre-cleaned and ready to use Frosted on oneside frosted for secure sample marking Polished edges and 90° corners for safety Packed in carton: 1440 slides per carton Ready-to-use slides that speed up routine work These microscope slides are supplied pre-cleaned, so they eliminate an initial preparation step and reduce handling time before sample mounting. The use of soda-lime glass provides a consistent substrate for everyday microscopy tasks where dependable optical behaviour is required. The combination of a surface **frosted onone-side ** and standard edge finishing helps technicians mark samples clearly while maintaining a smooth working surface on the opposite side. This configuration supports efficient sample throughput in busy labs and teaching environments. Clear labelling and safer handling for everyday use The slides feature 90° corners and polished edges, reducing the risk of nicks and cuts during handling and storage. The frosted surface enables written or pencil labelling that remains readable through common fixation and observation procedures, which simplifies sample tracking. The product’s machining and finishing emphasise practical safety and workflow efficiency rather than specialist optical properties, making these slides suitable for routine examinations, education and general laboratory use. Reliable supply format to support inventory planning Supplied in a commercial carton format, the packaging is designed for storage and bulk use, helping to streamline reorder cycles and reduce the frequency of procurement. The consistent packaging format supports predictable stock management and simplifies issuing slides to different workstations. For operations that require steady replenishment, this supply model contributes to uninterrupted laboratory routines and reduced administrative overhead. Practical features that fit standard laboratory workflows Manufactured with a one‑frosted side and smooth polished edges, the slides are compatible with standard handling practices and fit typical slide racks and trays. The pre-cleaned state reduces immediate contamination risks and the need for initial cleaning steps, while the flat, ground edges facilitate safe transfer and manipulation under a microscope. These design choices focus on practical reliability and everyday convenience rather than specialist or high‑precision optical applications. Contact Metav Werkzeuge for availability, technical clarification and to order the Globe Scientific Diamond Essentials slides directly from our Emmerich warehouse Technical Data Article number: 1304 Label: Globe Scientific Diamond Essentials Microscope Slides 1304 Product type: Slide Manufacturer SKU: 1304 Facts Packaging: Carton: 1440 slides Special features Material: soda-lime glass 90° corners Polished edges Frosted on oneside frosted Pre-cleaned and ready to use FAQ What material are these slides made from? The slides are made from soda‑lime glass; the Globe Scientific Diamond Essentials slides (SKU 1304) use this material for consistent everyday performance. Are the slides ready for immediate use on arrival? Yes, the Globe Scientific Diamond Essentials slides are supplied pre-cleaned and ready to use, reducing preparation time in routine lab workflows. Do the slides have any special edge treatment to improve safety? The slides have polished edges and 90° corners to reduce the risk of handling injuries and to aid safe, repeatable use in the laboratory. Is there a frosted area for labelling on the slides? Each slide includes a surface frosted on oneside frosted surface specifically intended for written sample identification, which is useful for tracking and organisation. How are the slides packaged for bulk supply? Packaging is provided in a carton format suitable for bulk use and inventory management; refer to the technical data for the exact packaging details Manufacturer: Globe Scientific; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
76mm Head Holder for DZ Series and Universal Stand 65.980 - Euromex
A stable, standardised head mounting with a Ø76 mm interface for the DZ-series and the black universal stand 65.980 enables reliable alignment and fast interchange of inspection heads; compatibility and simplicity reduce inventory needs. Order the component directly via Metav Werkzeuge or contact our consultants for application advice. Head Holder Ø76 mm for DZ-series – Stand/Holder by Euromex, compatible with universal stand 65.980 The Head Holder Ø76 mm provides a secure mounting solution for DZ-series heads and the black universal stand 65.980, designed to simplify assembly and ensure repeatable positioning in inspection and measurement setups. Ø76 mm standard interface for secure fitting Compatible with DZ-series and stand 65.980 Simple interchange for reduced setup time Compact holder for inspection and measurement rigs Stable, standardised mounting for repeatable positioning The Ø76 mm interface offers a standard connection that supports repeatable alignment across modular setups. By matching the DZ-series interface and the black universal stand 65.980, the holder reduces the need for bespoke adapters and shortens changeover times. This standardisation translates into smoother workflow and fewer compatibility checks when switching heads or instruments. The result is greater operational efficiency in quality control benches and inspection stations. Practical benefits for workshop and laboratory workflows Compatibility with the DZ-series and the universal stand 65.980 streamlines parts management and keeps tool inventories lean. The simple mounting principle permits quick removal and refitting of heads, which minimises downtime during inspections or routine adjustments. In environments where multiple instruments share a common support system, this holder acts as a reliable interface that prioritises consistent alignment and predictable behaviour during measurement tasks. Clear integration and supplier support for procurement decisions Selection of a standardised head holder supports predictable procurement and maintenance. The holder integrates into modular assemblies used in inspection, documentation or assembly tasks without requiring extensive modification. For further technical clarification or to confirm fitment within a specific setup, Metav Werkzeuge offers direct advice and can supply matching accessories to complete the assembly quickly and reliably. Choose the Euromex head holder for assured compatibility with DZ-series equipment and the universal stand 65.980; contact Metav Werkzeuge for tailored advice and secure supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 65.981 Product name: Head holder Ø76 mm for DZ-series and universal stand 65.980 Brand: Euromex Product type: Stand / Holder Facts Mount diameter: 76 mm Model series: DZ-series Cross-selling reference: 65.980 UID: 65.981 Compatibility and special features Compatible with DZ-series heads Fits the black universal stand 65.980 Intended for modular inspection and measurement setups Supplied as a single mounting component FAQ What equipment is this holder compatible with? The head holder is compatible with DZ-series heads and the black universal stand 65.980, providing a standard Ø76 mm interface for secure mounting. Can the holder be used to swap heads quickly in an inspection setup? Yes, the design of the head holder supports quick interchange of heads between the DZ-series and the universal stand 65.980, reducing setup time in inspection workflows. Is the mounting diameter specified? The holder uses a 76 mm mounting diameter, indicated as Ø76 mm in the product designation. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
76mm Head Holder for NexiusZoom and Universal Stands, 76mm Diameter - Euromex
Take advantage of a precise, industry-compatible mounting solution that combines a 76 mm head aperture with guaranteed compatibility for the NexiusZoom series and the NZ.9025 / NZ.9027 universal stands; the result is reduced set-up time and stable optical alignment. Order the accessory directly via Metav Werkzeuge or consult the specialists for technical clarification. NZ.9081 — 76 mm head holder for NexiusZoom (Euromex) The NZ.9081 head holder is designed to secure microscope heads from the NexiusZoom series to compatible universal stands, enabling stable and repeatable positioning for inspection and imaging tasks 76 mm head bore for secure fit Compatible with NexiusZoom series Fits NZ.9025 and NZ.9027 universal stands Euromex accessory, SKU NZ.9081 Stable integration for modular optical systems The 76 mm head aperture provides a standardised interface that simplifies the mechanical connection between the inspection head and stand. By adopting a defined bore size, the holder ensures secure mounting and preserves optical alignment when heads are changed or repositioned. This compatibility reduces setup variability, which in turn decreases the need for frequent recalibration and supports consistent measurement and imaging results across repeated operations. Reduced downtime through straightforward mechanical interface Designed for mechanical reliability, the holder offers a compact solution for attaching heads to universal stands. The direct-fit approach shortens assembly time and helps maintain the chosen focus plane during routine inspections. The emphasis on compatibility with the indicated stand models streamlines equipment selection within modular workstations and supports efficient workflow transitions between measurement and documentation tasks in laboratories and production benches. Practical choice for workshop and laboratory environments As an accessory from Euromex, the component is suited to technical settings where quick reconfiguration and dependable holding are priorities. The holder complements the modular nature of contemporary inspection setups and pairs well with related accessories for extended functionality. For projects requiring validated combinations of stand and head, the documented fitment with the listed stand models supports procurement decisions and downstream system planning. Discuss compatibility and procurement with Metav Werkzeuge — contact the Metav specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to review configuration options and place an order. Technical data Article number: NZ.9081 Product type: Head holder Manufacturer: Euromex Label: 76-mm head holder for NexiusZoom and the black universal stands NZ.9025 / NZ.9027 Facts Head aperture diameter: 76 mm Special features Compatible series: NexiusZoom Compatible stands: NZ.9025; NZ.9027 Cross-selling SKUs: NZ.5302; NZ.5303; NZ.9025; NZ.9027 SKU / UID: NZ.9081 FAQ Is this holder compatible with NexiusZoom heads? The NZ.9081 head holder is designed specifically for the NexiusZoom series and provides the defined interface for those heads. Which stands fit this head holder? The holder fits the universal stands NZ.9025 and NZ.9027 as specified. What is the head aperture size? The head aperture measures 76 mm, providing the mechanical fit for compatible heads. Can the NZ.9081 be used with other Euromex accessories? The NZ.9081 is listed alongside related SKUs such as NZ.5302 and NZ.5303, which may be considered during system configuration. Is the product sold as a single accessory or part of a kit? The SKU NZ.9081 refers to the individual head holder accessory; compatibility with stands and related items is documented for system planning. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
78mm Plan Apochromatic Common Main Objective Working Distance 78 mm - Euromex
High-fidelity planapochromatic correction and a generous 78 mm working distance deliver flat, usable images and easier sample access; the shared 1x main objective for the DZ-series reduces spare-part complexity and speeds up maintenance. Order the objective directly via Metav Werkzeuge or consult our specialists for application support. Planapochromatic 1x shared main objective for DZ-series – Objective / lens by Euromex, 78 mm working distance Planapochromatic 1x shared main objective for DZ-series is a low-magnification, flat-field objective optimised for stereo microscope inspection and assembly tasks with a large working distance for comfortable handling Planapochromatic optical correction 1x shared main objective reduces spares 78 mm working distance for easy handling Compatible with DZ-series stereo microscopes Consistent flat-field imaging for reliable inspection The Planapochromatic 1x shared main objective for DZ-series (DZ.4010) provides a flat imaging field across the full view, reducing edge curvature and colour fringing that can mislead visual inspection. This planapochromatic design corrects primary optical aberrations so that etched markings, solder joints and micro‑features appear with accurate geometry and neutral colour balance. For quality control and routine measurement, the result is greater repeatability and fewer rechecks, which improves throughput and reduces downtime in serial inspection tasks. Improved handling and access through a large working distance A 78 mm working distance gives technicians more room to manipulate parts, probes or tools beneath the objective without sacrificing image quality. The extended clearance supports ergonomic working positions and safer use of fixtures or pick‑and‑place tools during assembly and repair. Because the module maintains a 1x view with a wide usable field, it simplifies orientation and measurement setups, enabling faster visual decisions and a smoother workflow on the bench or in the inspection station. Compatibility, stock rationalisation and procurement advantages Designed as a shared main objective for the DZ-series, this Euromex lens reduces the number of distinct spare parts required across a range of stereo microscopes, lowering inventory complexity. The straightforward optical specification and mechanical fit streamline replacements and service cycles, so equipment managers benefit from predictable maintenance and lower operational overhead. For customers seeking proven availability and supply-chain transparency, Metav Werkzeuge provides procurement support and product matching for integration into existing inspection systems Contact Metav Werkzeuge for tailored compatibility checks, delivery options and integration advice on the Euromex DZ.4010 objective; reach Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com for prompt assistance Technical Data SKU: DZ.4010 Manufacturer: Euromex Product type: Objective / lens Model series: DZ-series Label: Planapochromatic 1x shared main objective for DZ-series (Working distance 78 mm) Facts Working distance: 78 mm Magnification: 1x UID: DZ.4010 Special features Planapochromatic correction Shared main objective for DZ-series Cross‑compatible SKUs: DZ.1100;DZ.1105;DZ.1600;DZ.1605;DZ.1800;DZ.1805 Application: Stereo microscope inspection and assembly FAQ What does "planapochromatic" mean for imaging performance? Planapochromatic indicates an objective corrected for field flatness and chromatic aberration; the Euromex DZ.4010 produces a flat, colour‑accurate image across the full field for reliable inspection. Which microscopes are compatible with this main objective? The objective is intended for the DZ-series of Euromex stereo microscopes and is listed as a shared main objective for that model line (SKU DZ.4010). How does the 78 mm working distance benefit bench tasks? A 78 mm working distance gives additional clearance for tools, fixtures and hands beneath the lens, improving ergonomics and reducing the need to reposition components during inspection. Is this objective suitable as a spare part across multiple DZ models? Yes; the shared 1x main objective design reduces the number of different spares required across DZ-series microscopes, simplifying inventory and service planning. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
7in MicroBlue Microscope 4/10/S40x Achromatic Objectives Cross Table 1W Bicolour LED Battery/USB-C - Euromex
Take advantage of the combination of immediate screen-based inspection, achromatic objectives and flexible power options for dependable, efficient sample analysis in workshop and teaching environments. Order the product directly via Metav Werkzeuge or ask our consultants for tailored advice. MicroBlue MB.1051-LCD tabletop microscope with fixed 7-inch LED screen and achromatic objectives by Euromex A compact, screen-equipped MicroBlue microscope designed for bench-top inspection, simple documentation and versatile use in education, quality control and routine workshop checks. Fixed 7-inch LED screen for instant viewing Achromatic 4x/10x/40x objectives (DIN 35 mm) 1 W two-colour LED for improved contrast Battery and USB‑C power for flexible use Immediate visual feedback for efficient inspection The integrated 7-inch LED screen delivers direct image display without the need for an eyepiece, enabling teams to inspect samples together and speed up decision-making. Combined with achromatic objectives, the optical train reduces colour fringing and produces a clear field, which is especially valuable when assessing edges, surface finishes or small defects. This arrangement supports a more efficient workflow by removing the step of transferring images to an external monitor, while preserving optical clarity consistent with DIN-standard optics. Improved contrast and precise specimen positioning Illumination is provided by a 1 W two-colour LED, allowing contrast adjustment through warmer or cooler light tones to reveal surface relief and subtle colour differences. The cross stage (mechanical stage) enables controlled, repeatable specimen movement for methodical scanning and comparison. For users less familiar with microscopy, the two-colour lighting simplifies the visual differentiation of features — a practical advantage in vocational training and routine inspection tasks where fast, reliable observation is needed. Portable power and convenient connectivity for varied environments Power options include operation from 3 AA batteries for cordless use and an external 5 Vdc USB‑C input for continuous operation in the workshop or classroom; the supplied multi‑plug adapter accepts 100–240 Vac. This combination ensures mobility during field checks and a straightforward connection to standard power supplies at lab benches. The USB‑C input also supports simple integration into existing setups, reducing downtime and increasing device availability across locations. Designed for practical laboratory and teaching use Built to serve education, light industrial inspection and general bench work, the instrument uses DIN 35 mm optical standards and a set of common magnifications (4x, 10x, 40x), offering familiar handling for technicians and students. The compact form factor and fixed display promote collaborative viewing and reduce ergonomic strain during prolonged observation. Where quick verification and visual documentation are priorities, this configuration provides a pragmatic balance of usability and optical performance. For personalised advice on fitting this Euromex MicroBlue with a specific workflow or to arrange purchase through Metav Werkzeuge with expert guidance from Emmerich, please contact Metav Werkzeuge directly for assistance. Technical data Article number: MB.1051-LCD Model series: MicroBlue Type: microscope Manufacturer: Euromex UID: MB.1051-LCD Facts Screen diagonal: 7 inches Objectives: 4x / 10x / 40x (achromatic) Objective standard: DIN 35 mm Illumination: 1 W two-colour LED Power options: 3 AA batteries; 5 Vdc USB‑C external Mains adapter: 100–240 Vac Special features Fixed 7-inch LED screen Cross stage for precise sample movement Achromatic objectives for reduced chromatic aberration Two‑colour LED illumination for contrast control Wireless battery operation and USB‑C connectivity FAQ What magnifications are available and how do they perform? The Euromex MicroBlue MB.1051-LCD offers 4x, 10x and 40x achromatic magnifications; these provide clear, low- to medium-power views suitable for surface inspection, teaching demonstrations and routine quality checks. Can the microscope be used without mains power? Yes, the MicroBlue MB.1051-LCD runs on 3 AA batteries for cordless use and can alternatively be powered via an external 5 Vdc USB‑C input when continuous mains operation is required. How does the two-colour LED improve observation? The two-colour 1 W LED lets operators switch between warmer and cooler lighting tones to enhance surface detail and contrast, which helps in identifying fine textures and subtle defects without complex adjustments. Is the screen suitable for group demonstration and documentation? The fixed 7-inch LED screen provides instant, eyepiece-free viewing ideal for small group demonstrations and preliminary documentation; its size balances portability with a clear visual field. What settings and environments are this microscope best suited for? The unit is well suited for vocational training, light workshop inspection and routine laboratory checks where simple, robust operation and immediate image viewing are priorities. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
7x Inspection Loupe 10-0-10mm Scale 0.1mm Crosshair - Euromex
Take advantage of the combination of clear 7× optical magnification, a 10–0–10 mm measuring scale with 0.1 mm divisions and an integrated crosshair for faster, more reliable visual inspection. Order or request procurement advice through Metav Werkzeuge for prompt supply and specialist support. Measuring Magnifier 7× PB.5044 — 10–0–10 mm scale, 0.1 mm divisions (Euromex) Measuring Magnifier 7× PB.5044 — a compact inspection loupe designed for rapid visual measurement and centring of small components, combining clear magnification with a fine millimetre scale and a built-in crosshair 7× optical magnification for clear inspection 10–0–10 mm measuring scale with 0.1 mm divisions Integrated crosshair for precise centring Compact inspection loupe for workshop use Faster, more reliable visual measurements The measuring loupe delivers immediate visual results by combining 7× magnification with a finely graduated 10–0–10 mm scale. The coarse form of measurement is accelerated by the optical enlargement, while the 0.1 mm divisions enable refined readings without additional instruments. This reduces the need for constant transfer to calipers for simple checks and shortens inspection cycles on repetitive parts, supporting consistent throughput and lower error rates in small-batch or series production. Precise centring and repeatable alignment An integrated crosshair provides a clear visual reference for exact centring and alignment of features such as holes, edges or reference lines. When paired with the engraved scale, the crosshair aids in quick verification of offsets and positional tolerances. The optical reticule is especially useful for quality-control tasks where visual reproducibility is required and where documentation of relative positions speeds up decision-making on the shop floor. Practical design for workshop and bench use Designed as a purpose-built inspection loupe, the device is compact and easy to handle at a workbench, inspection station or packing line. The construction focuses on straightforward measurement, visual clarity and portability rather than on complex electronics, which makes it suitable for rapid spot checks, incoming inspection and maintenance rounds. If additional technical data are required, Metav Werkzeuge provides expert support and supplementary specifications by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 For consistent, fast visual inspection, request procurement advice for the Euromex measuring magnifier from Metav Werkzeuge — specialist supply from Emmerich with professional consultation and reliable delivery. Technical data Article number: PB.5044 UID: PB.5044 Manufacturer: Euromex Product type: Magnifier Label: Measuring magnifier 7×; scale 10–0–10 mm; 0.1 mm divisions; crosshair Facts Magnification: 7× Measuring scale: 10–0–10 mm Scale division: 0.1 mm Special features Integrated crosshair Compact inspection loupe design Optical enlargement for quicker visual checks FAQ How precise are the scale graduations on the loupe? The scale on the measuring magnifier is divided at 0.1 mm, allowing the Euromex magnifier (PB.5044) to support fine visual determinations suitable for routine inspection tasks. Can the device be used for centring and alignment tasks? Yes, the built-in crosshair is intended for precise centring and positional checks, making the magnifier suitable for alignment work and reference checks at the bench. Is the magnifier suitable for on-the-go workshop inspections? The compact format of this inspection loupe makes it well suited to portable checks, incoming inspection and quick spot verifications on the shop floor. Does the loupe replace calipers for dimensional control? The magnifier speeds up visual checks and preliminary measurements; it complements rather than replaces calipers for traceable, certified dimensional control where formal measurement records are required. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
7x Inspection Magnifier With 5 Scales, Ergonomic Handheld - Euromex
Take advantage of precise visual inspection and simple comparative measurement with a compact, workshop-ready loupe; the combination of 7× magnification and five scales speeds up quality checks while reducing measurement errors. Order the Euromex loupe directly via Metav Werkzeuge or consult our specialists for application advice. Measuring loupe PB.5045 – 7× magnification, five scales The Measuring loupe PB.5045 is a compact inspection instrument for workshop visual checks and basic comparative measurements, ideal where rapid verification of small details is required 7× magnification for clear detail viewing Five integrated measurement scales Compact handheld loupe design Euromex precision optics Faster quality checks through clear magnification With 7× magnification, the loupe provides a straightforward way to inspect fine details that are difficult to see with the unaided eye. The optical enlargement shortens inspection cycles and reduces the risk of overlooked defects, which is a direct efficiency advantage for shop-floor quality control. The combination of enlarged view and calibrated scales permits quick comparative readings, supporting faster decision-making in repetitive inspection tasks. Multi-scale layout for convenient comparative measurement The inclusion of five scales allows the instrument to serve several measurement references without switching tools. This multi-scale design supports comparative checks, alignment tasks and quick tolerancing where a full measuring instrument would be impractical. The compact format and clear markings make the loupe suitable for use on assembly lines, inspection benches or mobile checks in workshops, improving throughput while keeping handling simple. Designed for workshop practicality and low maintenance Built as a handheld loupe with robust optics, the instrument is suitable for everyday inspection duties without requiring elaborate care. The optical system ensures stable visual performance; the durable housing reduces susceptibility to routine knocks and handling. For teams seeking dependable, low-complexity inspection aids, the loupe offers a practical balance between precision and ease of use, requiring minimal maintenance compared with larger measuring devices. Trusted brand and shop-floor support for reliable supply Manufactured by Euromex, the loupe benefits from a manufacturer known for optical inspection tools. When sourced via Metav, customers gain from established logistics and a quality filter that supports consistent supply to European workshops. The availability of a familiar, compact inspection tool encourages standardisation of basic checks across departments, contributing to reproducible results and process stability. Contact Metav Werkzeuge for specialist guidance on integrating the Euromex measuring loupe PB.5045 into production processes; Metav’s team in Emmerich can advise on application suitability and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: PB.5045 Label: Measuring loupe 7× with 5 scales Manufacturer: Euromex Microscopen BV Product type: Loupe UID: PB.5045 Facts Magnification: 7× Scales: 5 Special features Handheld inspection loupe Multi-scale measurement function Euromex optical design FAQ What level of magnification does the loupe offer? The loupe provides 7× magnification, sufficient for detailed visual inspection and close examination of small features. Can this loupe be used for simple measurement checks? Yes, the instrument has five scales that enable quick comparative measurements and basic tolerancing tasks without the need for additional tools. Is the loupe suitable for workshop and on-bench use? The compact, handheld design is intended for workshop and bench inspection, offering portability and ease of use during routine quality checks. Who manufactures this measuring loupe? The loupe is manufactured by Euromex and supplied under SKU PB.5045; Euromex is known for optical inspection instruments used in industrial settings. How does the loupe support process reliability? By combining magnification with multiple scales, the loupe enables consistent quick checks, helping to detect defects early and support reproducible inspection routines. Manufacturer: Euromex Microscopen BV; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
7x-45x Stereo Zoom Microscope Trinocular Head 45° Rotatable, LED Incident and Transmitted Illumination, With SWH10 Eyepiece - Metav IndustryLine
High-precision imaging via 7–45× magnification, an ergonomic 45° rotatable trinocular head and adjustable transmitted/reflected LED illumination combine to deliver reliable results in education, laboratory and industrial inspection. Order the stereo zoom microscope directly via Metav Werkzeuge or ask our consultants if needed. Stereo zoom microscope ZS0745T trinocular — 7–45×, adjustable LED illumination Stereo zoom microscope ZS0745T trinocular offering wide-range magnification and flexible lighting for training, research and production environments Trinocular zoom head 7–45× magnification Adjustable LED reflected and transmitted light 45° rotatable head for ergonomic viewing Multi-coated optics for high-contrast imaging Clear results for routine inspection and teaching The 7–45× zoom range provides a versatile balance between overview and detail, making the instrument suitable for tasks from component alignment to close visual inspection. The optical system is multi-coated, which improves contrast and reduces stray light for cleaner images. For workshops and teaching labs this means fewer retakes and faster throughput; for research and quality control it means more reliable visual decisions. The robust mechanical design ensures steady imaging during moderate manipulation, while the SWH10 eyepiece included supports bright, comfortable observation. Lighting that adapts to the sample Integrated, adjustable LED illumination combines reflected (surface) and transmitted (backlight) options in a single stand-mounted unit, powered at 3 W for efficient, stable output. The dual-mode lighting lets users adapt contrast and shadowing to different materials and surface finishes, improving defect detection on metals, plastics and composite parts. LED light sources also reduce heat load at the specimen and offer long service life, which supports continuous use in teaching demonstrations and extended inspection shifts. Ergonomics and optical control for extended use A 45° inclined head, rotatable through 360°, plus an interpupillary adjustment from 52–76 mm and a dioptre range of ±6 ensure comfortable, fatigue-minimised observation for operators with varying visual needs. The inclinable, rotatable head allows teams to share views without repositioning delicate samples, which preserves setup alignment. These design choices reduce operator strain and speed up collaborative workflows in both educational and industrial settings. Built for demanding environments and included accessories Designed for demanding application in education, laboratory and industry, the instrument is supplied complete with stand components and an auxiliary lens for extended working scenarios. The working distance of 118 mm and a usable working surface of 95 mm give enough clearance for tools and small fixtures while maintaining image quality. The base footprint (292×283 mm) and column (Ø25×240 mm) provide a stable platform for precision tasks. The instrument’s combination of mechanical stability and optical quality supports repeatable inspection routines and dependable classroom demonstrations. Contact Metav Werkzeuge to discuss how the ZS0745T trinocular system can be configured for specific workflows or to arrange delivery to your site — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M503.212.2 GTIN: 4054469144849 Model: ZS0745T trinocular Brand: Metav IndustryLine Type: Stereo zoom microscope trinocular Included: SWH10 eyepiece, stand, auxiliary lens Facts Magnification: 7–45× Working distance: 118 mm Working surface: 95 mm Interpupillary distance: 52–76 mm Dioptre adjustment: ±6 Field of view: 33–5.1 mm Illumination power: 3 W Base dimensions: 292×283 mm Column: Ø25×240 mm Weight: 6.15 kg Special features Trinocular head inclined 45°, rotatable 360° Adjustable LED reflected and transmitted illumination Multi-coated optical elements Designed for education, laboratory and industrial use High optical and mechanical quality construction FAQ What magnification range does the ZS0745T provide? The ZS0745T trinocular stereo zoom microscope delivers a 7–45× magnification range suitable for both overview inspection and closer detail work. Is the lighting suitable for transparent and opaque samples? Yes. The integrated system offers both reflected and transmitted adjustable LED illumination, allowing the ZS0745T to handle opaque surfaces and thin/transparent specimens effectively. Can users with different eyesight work comfortably at the same station? Comfort features such as an interpupillary range of 52–76 mm and a ±6 dioptre adjustment facilitate comfortable observation for multiple operators using the Metav IndustryLine trinocular system. What accessories are supplied with the microscope? Delivery includes the SWH10 eyepiece, the stand and an auxiliary lens, enabling immediate use for teaching and inspection tasks with minimal additional setup. Is the instrument robust enough for routine industrial use? The ZS0745T is built with high mechanical quality and a stable base, combining multi-coated optics and a sturdy column to support repeated inspection cycles in laboratory and light industrial environments. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8 MP HD Camera 1080p 24-Bit Colour With SD, HDMI, USB 2.0, 0.37x Objective - Euromex
Take advantage of the combination of high-speed 1080p capture, an 8.0 megapixel Sony sensor and flexible connection options for reliable image documentation and inspection workflows; order the HD‑Pro Camera directly via Metav Werkzeuge or ask our consultants if needed. HD‑Pro Camera — Digital camera / digital microscope with 1080p and 8 MP sensor (Euromex) The HD‑Pro Camera is a high-resolution digital camera for microscopy and inspection tasks, designed for standalone recording or direct connection to a PC or monitor. High-speed 1080p capture 8.0 megapixel Sony sensor HDMI and USB 2.0 outputs SD card recording capability Supplied with 0.37x objective Precise, fast image capture for routine inspection The camera combines a 1/2.8 inch Sony sensor with 8.0 megapixel resolution and 24‑bit colour depth to deliver crisp, true-to-life images at 1080p. The sensor size and pixel count are optimised for a balance between resolution and frame rate, enabling high-speed live viewing while preserving fine detail. For non-specialists: the larger the sensor and the higher the pixel count, the more detail can be captured in challenging lighting; the integrated colour depth ensures accurate reproduction of subtle tones, which is important for documentation and quality assurance. Flexible integration into inspection and documentation workflows Designed to work either as a self-contained recorder or paired with analysis software, the unit supports standalone recording to an SD card and simultaneous output via HDMI or USB 2.0. The included ImageFocus Alpha software simplifies image capture, measurement and file management when connected to a PC, while the SD slot allows independent operation where a computer is not practical. The supplied 0.37x objective provides a wider field of view suitable for inspection tasks that require context as well as detail; this makes the camera well suited to laboratory benches, educational settings and production-line checks. Practical connections and everyday handling Outputs are straightforward: HDMI provides a direct feed to an external monitor, while USB 2.0 allows capture and control from a PC. The on-board recording functions and bundled software remove complex setup steps, so image capture and archiving fit seamlessly into existing processes. The camera’s compact design and accessory-ready configuration mean that integration with stereo microscopes or inspection stands is simple, and the unit’s connections follow common standards to ensure compatibility with a wide range of displays and imaging workflows. Contact Metav Werkzeuge for tailored advice on integrating the HD‑Pro Camera with ImageFocus Alpha and to request a detailed technical datasheet: info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: VC.3039 Product type: Digital camera / digital microscope Manufacturer: Euromex Resolution: 8.0 MP Facts Sensor size: 1/2.8 inch Colour depth: 24 bit Video output: 1080p Interfaces: HDMI; USB-2 Features Integrated recording software SD card slot ImageFocus Alpha software included Supplied with 0.37x objective High-speed operation 8 MP Sony sensor FAQ What video resolution does the camera deliver? The unit delivers 1080p video output for full HD capture; the HD‑Pro Camera from Euromex records in high-definition for clear inspection footage. Can the camera record without a computer? Yes, standalone recording to an SD card is supported, allowing the HD‑Pro Camera (VC.3039) to operate independently of a PC. Which interfaces are available for live viewing? Live output is available via HDMI for direct monitor connection and USB 2.0 for PC integration with the included ImageFocus Alpha software. What does the supplied 0.37x objective mean for field of view? The 0.37x objective offers a wider field of view than standard microscope objectives, making the system more practical for inspection tasks that require broader area coverage. Is the bundled software suitable for measurement and documentation? Yes, the included ImageFocus Alpha software supports capture, basic measurement and organised image storage for efficient documentation with the Euromex digital camera. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
8 MP HD High-Speed Digital Camera 1080p With 0.37x Lens, 24-Bit Colour, HDMI USB-2, SD Recording - Euromex
Combining high‑speed 1080p capture with an 8 MP Sony 1/2.8‑inch sensor and integrated recording options, this system delivers reliable, colour‑accurate images for inspection and documentation. Order the HD‑Pro Camera via Metav Werkzeuge or consult our specialists for assistance with integration and configuration. HD‑Pro Camera VC.3039‑HDS — High‑speed 1080p digital camera with 8 MP Sony sensor (Euromex) The HD‑Pro Camera VC.3039‑HDS is a high‑speed 1080p digital camera for standalone inspection and microscope imaging, suitable for industrial documentation and laboratory visualisation High‑speed 1080p capture 8 MP Sony 1/2.8‑inch sensor 24‑bit colour depth imaging HDMI and USB‑2 outputs SD card recording and screen Faster inspections with Full HD detail This imaging solution delivers Full HD (1080p) video at high frame rates, paired with an 8 MP Sony 1/2.8‑inch sensor to provide increased detail and reliable contrast for inspection workflows. The larger sensor area improves light sensitivity compared with smaller formats, which translates into clearer images under typical workshop lighting. The 24‑bit colour depth preserves accurate colour rendition for documentation and quality assurance, reducing the need for repeated captures and streamlining traceability in production environments. Flexible connectivity and independent recording Designed for practical use on the bench, the unit offers both HDMI and USB‑2 outputs for direct display or PC connection, while SD card recording enables true standalone operation without a host computer. The included ImageFocus Alpha software supports capture, basic measurement and file management when a PC is connected, but the camera’s internal recording functions mean operation remains simple and robust during routine inspections. This flexibility reduces setup time and lets teams choose the most efficient workflow for task‑specific documentation. Ready optics and smooth imaging workflow Supplied with a 0.37x lens, the camera provides a wider field of view suitable for general microscopy and inspection tasks, minimising the need for frequent repositioning of samples. The integrated screen and built‑in recording software offer immediate visual feedback and easy archive creation on site, which benefits applications requiring fast decision making. Whether used as a dedicated digital microscope camera or as a standalone inspection recorder, the unit supports consistent image capture and straightforward handover to quality records. For fast, reliable imaging from Euromex, contact Metav Werkzeuge for personalised advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930, and ensure the HD‑Pro Camera VC.3039‑HDS is configured to your inspection needs Technical data SKU: VC.3039‑HDS Model: HD‑Pro Camera Product type: Digital camera / digital microscope Manufacturer: Euromex Facts Resolution: 8.0 MP Sensor size: 1/2.8 inch Video: 1080p (Full HD) Colour depth: 24‑bit Lens: 0.37x Interfaces: HDMI; USB‑2 Special features SD card recording Integrated screen Integrated recording software ImageFocus Alpha software included Standalone operation or PC connection FAQ Can the camera record without a computer? Yes. The HD‑Pro Camera VC.3039‑HDS supports SD card recording for standalone operation, allowing capture and storage without a PC. Which interfaces are available for live viewing? Live output is available via HDMI and USB‑2, enabling direct display on a monitor or connection to a PC with the included ImageFocus Alpha software. Is software included for image capture and basic measurement? ImageFocus Alpha is supplied with the system and provides capture, file management and basic measurement functions when the camera is connected to a computer. What sensor and image quality can be expected for inspection tasks? The unit uses an 8 MP Sony 1/2.8‑inch sensor with 24‑bit colour depth, delivering Full HD video with accurate colour reproduction and improved sensitivity for clearer inspection images. Which applications suit this camera best? The system is suitable for digital microscope imaging, bench inspections and documentation tasks where high‑quality Full HD capture and simple standalone recording are advantageous. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
8.8mm 20x/0.40 Infinity-Corrected Brightfield Plan Objective No Coverglass Correction - Euromex
Benefit from the combination of flat-field Plan optics, 20× magnification with 0.40 NA and an 8.8 mm working distance to enable precise, repeatable inspection of metallographic and material samples. Order the objective directly via Metav Werkzeuge or ask our consultants for integration support. Plan PLMi 20x/0.40 IOS objective for bScope (Euromex) — Infinity-corrected brightfield lens The Plan PLMi 20x/0.40 is an infinity‑corrected brightfield objective optimised for materials science inspection on bScope microscopes Plan-corrected optics for flat, even imaging 20× magnification with 0.40 numerical aperture Infinity-corrected IOS optical design 8.8 mm working distance for easy sample access Consistent, flat imaging for reliable measurements The objective uses Plan optics to deliver a uniformly sharp image across the field, so measurements and documentation remain reliable from centre to edge. Flat-field correction reduces the need for image post-processing when documenting features on polished metal, composite or ceramic specimens. This stability is particularly important in materials science where image uniformity directly affects defect detection and dimensional evaluation. Resolution and contrast tuned for material detail With 20× magnification and a 0.40 numerical aperture, the lens balances resolving power and depth of field to reveal fine surface structure while maintaining practical focus tolerance. The numerical aperture quantifies light-gathering ability and influences resolution: a higher NA improves detail resolution but narrows depth of field. This configuration is suited for clear, high‑contrast brightfield observation of microstructures without sacrificing ease of focusing. Practical working distance and sample handling advantages An 8.8 mm working distance permits easier handling of samples and the use of ancillary tools under the lens, while the absence of cover-glass correction signals that the optics are optimised for uncovered specimens typical in metallography and materials testing. Where polished samples are inspected without a cover slip, this design avoids spherical aberrations introduced by unneeded cover-glass compensation and improves image fidelity near the surface. Designed for modern microscope systems and brightfield workflows The infinity-corrected IOS design integrates into optical systems that use a parallel image plane between objective and tube lens, enabling straightforward system modification and the addition of intermediate optics or cameras. Suited to bScope brightfield applications, the lens is appropriate for routine laboratory inspection, failure analysis and quality control tasks where consistent, plan-corrected performance is required. Compatibility checks with the host microscope and camera mount are advised prior to installation to ensure optimal alignment. Contact Metav Werkzeuge for tailored advice on integrating Euromex optics into inspection workflows — our Emmerich team advises on compatibility, supply and technical details. Technical data Article number: BS.8120 Manufacturer: Euromex Product type: Objective / lens Model series: bScope UID: BS.8120 Facts Magnification: 20× Numerical aperture: 0.40 Working distance: 8.8 mm Special features Plan (flat-field) correction Infinity-corrected (IOS) design Brightfield application For bScope materials science No cover glass correction FAQ What magnification and numerical aperture does this objective provide? The Euromex Plan PLMi 20x/0.40 objective offers 20× magnification with a 0.40 numerical aperture, providing a balance of resolution and depth of field suited to material inspection. Can this objective be used with samples that have a cover glass? The Euromex Plan PLMi 20x/0.40 is supplied without cover-glass correction and is intended for uncovered specimens; using a cover glass may introduce optical aberrations unless compensated elsewhere in the optical path. Is the lens compatible with standard infinity-corrected microscopes? Yes, the Plan PLMi 20x/0.40 is an infinity-corrected IOS objective designed for use in infinity optical systems such as bScope microscopes; verify mechanical mount and parfocal requirements before installation. What working distance does the objective offer and why does it matter? The objective provides an 8.8 mm working distance, offering clearance for sample manipulation and ancillary probes; this aids practical handling during metallographic preparation and inspection. Is this objective suitable for metallography and materials science applications? The Euromex Plan PLMi 20x/0.40 objective is specifically optimised for materials science brightfield inspection, delivering plan-corrected imaging and practical working distance for metallographic evaluation. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com