Modular screw-in cutters for adaptable deep machining
Screw-in cutters are modular milling tools designed to be screwed into extensions or toolholders to adjust overhang for deep or recessed machining and to make tool systems more economical by allowing only the front milling head to be replaced; they are indispensable in tool and mould making for such reasons. Where machining requires coolant delivered through the tool, internal cooling provides continuous, directed supply through channels to the cutting edges, whereas designs without internal cooling rely on external nozzles and suit only very shallow, easily accessible operations. For deep cavities and long extensions, the combination of long extensions and internal coolant ensures high flush pressure to evacuate chips against gravity, reduce thermal load and prevent chip clogging and vibration. Key advantages include improved tool longevity, higher process reliability and easier tool maintenance, with the primary use being precision metalworking and cavity finishing.
16mm Screw-In Cutter for LNMU 0303 Indexable Inserts L42mm With Internal Coolant, M08 Thread - Teknik Makina
Take advantage of the internally cooled design and compact 16 mm diameter for continuous, high-precision milling; the combination of secure M08 screw-in mounting and compatibility with LNMU 0303 indexable inserts ensures reliable tool life and quick changeover. Order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Screw-in milling head VT300-1TM – 16 mm diameter, internal coolant (Teknik Makina) The Screw-in milling head VT300-1TM is a compact, internally cooled cutter designed for LNMU 0303 indexable inserts, suitable for precision finishing and versatile industrial milling applications 16 mm diameter for compact milling heads Internal coolant for improved tool life Compatible with LNMU 0303 indexable inserts M08 screw-in thread, lightweight design Longer service intervals through optimised coolant and chip control The internal coolant channel directs cutting fluid close to the cutting edge, promoting effective chip evacuation and reduced thermal load. With its two cutting edges, the head delivers stable engagement and consistent surface quality, which translates into extended tool life and fewer interruptions on the shop floor. This configuration is particularly beneficial where sustained cycles and predictable machining results are required, allowing process planners to rely on steady throughput rather than frequent tool swaps. The compact form also helps maintain spindle balance during high-speed finishing. Positive clamping and compact geometry for precise results A secure M08 thread and a deliberately slim profile allow precise axial positioning and repeatable seating in compatible holders. The short 42 mm overall length and defined cutting height 25 mm support access to tighter work zones without sacrificing stability, while the low mass (0.029 kg) reduces centrifugal loads. These mechanical attributes combine to improve dimensional accuracy in serial production and to simplify fixture design. For engineers seeking consistent tolerances, the result is reduced rework and a predictable production rhythm. Broad compatibility and straightforward maintenance for production continuity Designed for LNMU 0303 style indexable inserts and compatible with Tungaloy inserts, the VT300-1TM supports widely available grades and geometries, easing inventory management and insert selection. The head is secured with a small Torx fastener (Torx T8; screw M2.5x7), which simplifies replacement and reduces downtime during index changes. Indexable tooling is explained simply by its replaceable cutting segments: when one edge wears, the insert is indexed or replaced without exchanging the entire head, preserving toolholder investment and accelerating maintenance cycles. For application advice on Teknik Makina’s internally cooled screw-in heads or to arrange delivery from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 – our specialists will advise on the best configuration for the production task at hand Technical data SKU: VT300-1TM Product: Screw-in milling head for LNMU 0303 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 16 mm Overall length: 42 mm Thread height: 17 mm Cutting height: 25 mm Weight: 0.029 kg Number of cutting edges: 2 Special features Thread: M08 Internal coolant Compatible insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x7 FAQ Which inserts fit this milling head? The VT300-1TM is designed for LNMU 0303 indexable inserts and is listed as compatible with inserts from Tungaloy for straightforward procurement and grade selection. Does the head provide internal coolant? Yes, the milling head features internal coolant to direct fluid to the cutting zone, enhancing cooling and chip evacuation for improved tool life. How is the head mounted and secured? Mounting is via the M08 screw-in thread; the insert head is fastened with a Torx T8 screw (M2.5x7), allowing secure clamping and quick servicing. How many cutting edges does the head have? This model features two cutting edges, which balance cutting efficiency with surface finish and tool life. Is this head suitable for compact setups and tight access areas? The compact 16 mm diameter and 42 mm overall length provide a reduced envelope for access in confined machining situations while maintaining secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Screw-In Cutter For LNMX 0603 Indexable Inserts, M8 Thread, 2 Flutes - Teknik Makina
Take advantage of the compact Ø 16 mm cutting diameter, secure M8 thread and compatibility with LNMX 0603 indexable inserts for stable, repeatable machining; order this screw-in cutter directly via Metav Werkzeuge or consult the technical team for tailored recommendations. Screw-in Cutter VT152TM – for LNMX 0603 indexable inserts, Ø 16 mm, M8 thread (Teknik Makina) Screw-in Cutter VT152TM designed for reliable insert clamping and versatile finishing and roughing with LNMX 0603 indexable inserts. *Compatible with LNMX 0603 indexable inserts *Ø 16 mm cutting diameter *M8 screw-in thread for secure mounting *Two cutting edges for stable chip removal Space-saving diameter that enables tighter toolpaths The compact Ø 16 mm body reduces interference in confined setups and allows closer approach to intricate workpieces. This reduced diameter supports efficient use in multi-tool spindle configurations and nests comfortably in fixtures where larger heads would collide. The shorter footprint is beneficial where tool change cycles and spindle clearance are limiting factors, improving process integration without sacrificing rigidity. Secure fixation and fast insert changes reduce downtime A secure M8 thread combined with an M3x7 Torx screw provides reliable clamping of the LNMX insert family, while the supplied T8 key ensures repeatable tightening. These standardized fastenings speed up insert replacement and lower the risk of incorrect seating, contributing to consistent cutting geometry and fewer stoppages. The system is designed for quick maintenance to keep production running with minimal interruption. Consistent cutting with two optimised cutting edges The dual-edge configuration delivers a balance between material removal rate and surface quality, enabling predictable tool behaviour under varied cutting parameters. Using standard LNMX 0603 indexable inserts from Korloy allows selection of appropriate grades and chipbreakers for the required material and application, so the holder supports both roughing and finishing strategies while maintaining process stability. Ready integration and supplier confidence for workshops Built to accept widely available indexable inserts, this screw-in head simplifies tool inventory and replacement logistics. The compact design and standardised fixing mean straightforward integration into existing tool systems. Combined with Metav’s emphasis on accessible precision and dependable supply from Emmerich, the component fits into an efficient procurement and service workflow for industry and craft alike. Contact Metav Werkzeuge for availability, machining recommendations and compatibility advice on the Teknik Makina screw-in cutter VT152TM; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss application details and delivery from Emmerich Technical data SKU: VT152TM Product name: Screw-in cutter for LNMX 0603 indexable inserts Manufacturer: Teknik Makina Core data Cutting diameter: 16 mm Overall length: 42 mm Thread: M8 Cutting edges: 2 Features Compatible with Korloy LNMX 0603 indexable inserts Torx screw M3x7 for insert clamping Torx key size T8 provided Indexable insert system for fast replacement FAQ What inserts fit this screw-in cutter? The cutter accepts LNMX 0603 indexable inserts; Korloy LNMX 0603 grades are compatible and can be selected to suit the workpiece material. How is the insert secured in the tool? Insertion is secured by an M3x7 Torx screw tightened with a T8 key; this ensures repeatable seating and reliable clamping for the VT152TM screw-in cutter. What are the main dimensions to consider for machine setup? Key dimensions for setup are the Ø 16 mm cutting diameter and 42 mm overall length; the tool mounts via an M8 screw-in thread. Is this tool suitable for confined or multi-tool spindles? Yes, the compact Ø 16 mm design reduces collision risk and is well suited to tight toolpaths and multi-tool arrangements. Which manufacturer produces this item? The tool is supplied by Teknik Makina and sold through the Metav distribution channel under SKU VT152TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Screw-In Cutter for LOGU 0303 Indexable Inserts L46mm With Internal Coolant, M08 Thread - Teknik Makina
Take advantage of the combination of compact design, internal coolant and straightforward M08 screw mounting for reliable small-diameter milling operations; order the cutter directly via Metav Werkzeuge or consult our advisors for application-specific guidance. 16 mm screw-in cutter VT310-1TM – for LOGU 0303 indexable inserts, internal coolant (Teknik Makina) The 16 mm screw-in cutter VT310-1TM is a compact milling head engineered for precision work with LOGU 0303 indexable inserts, offering internal coolant and robust M08 mounting for tight-tolerance applications. 16 mm cutting diameter Internal coolant for controlled chip flow Compatible with LOGU 0303 inserts (Kyocera) M08 screw mounting with Torx T8 drive Compact precision for small milling tasks The VT310-1TM screw-in cutter delivers a combination of compact geometry and stable support that benefits small-batch and precision machining. With a 16 mm diameter and a 46 mm overall length, the head minimises overhang while providing a 30 mm cutting height across its two-flute design. This reduces bending and vibration, which translates into more consistent surface finishes and tighter dimensional repeatability on components where space and accuracy matter. Controlled cooling and improved tool life Equipped with internal coolant, this milling head guides cutting fluid directly to the cutting zone for efficient heat dissipation and enhanced chip evacuation. The internal supply helps to limit thermal growth and prevent built-up edge, extending the life of the indexable inserts and maintaining cutting performance over longer cycles. In practice, this means fewer tool changes and steadier process parameters for longer production runs. Straightforward compatibility and serviceability Designed for LOGU 0303 indexable inserts and compatible with inserts from Kyocera, the tool uses a simple M08 screw clamping system and a Torx T8 drive for secure assembly. The insert is retained by an M3x7 Torx screw, enabling quick and reliable replacements with standard workshop tools. Such a configuration reduces downtime during maintenance and simplifies stock management by allowing the use of widely available insert types. Ideal for precision toolrooms and flexible production The compact cutter suits precision toolrooms, contract manufacturers and workshops that require reliable small-diameter milling without complex set-ups. Lightweight at 0.03 kg, the head contributes minimal mass to the toolholder, helping to preserve spindle dynamics and reduce wear. The combination of easy insert replacement, internal coolant and a robust M08 interface makes this tool a practical choice where repeatability and process stability are priorities. Contact Metav Werkzeuge today for tailored advice on Teknik Makina cutters and to discuss how the VT310-1TM can be integrated into existing machining setups — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: VT310-1TM Product type: Screw-in cutter (Einschraubfräser) Brand: Teknik Makina Compatible inserts: LOGU 0303 indexable inserts Label: 16mm screw-in cutter LOGU 0303 L46mm with internal coolant Facts Diameter: 16 mm Overall length: 46 mm Thread height: 16 mm Thread: M08 Cutting height: 30 mm Cutting edges: 2 Weight: 0.03 kg Torx key: T8 Torx screw: M3x7 Special features Internal coolant Compatible with Kyocera inserts Two-flute design M08 mounting interface Compact, lightweight construction FAQ Is this cutter compatible with LOGU 0303 inserts? Yes. The VT310-1TM is specified for LOGU 0303 indexable inserts and supports inserts from Kyocera. Does the tool provide internal coolant? Yes. The cutter features internal coolant to direct fluid to the cutting zone for improved chip evacuation and thermal control. What is the mounting thread and how is the insert secured? The tool mounts with an M08 thread; the insert is secured using an M3x7 Torx screw driven with a T8 Torx key. How many cutting edges does the head have? The cutter is a two-flute design, offering a balance between chip clearance and surface finish. What are the key dimensions to consider for set-up? Important dimensions include a 16 mm diameter, 30 mm cutting height and 46 mm overall length. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Screw-In Cutter for LOGU 0303 Indexable Inserts L46mm, M08 Thread - Teknik Makina
Take advantage of the combination of compact design, reliable mounting and fast insert changes for efficient, repeatable milling operations; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. VT310TM 16 mm screw-in cutter (Ø 16 mm) by Teknik Makina — for LOGU 0303 indexable inserts VT310TM 16 mm screw-in cutter for LOGU 0303 indexable inserts, designed for compact machining tasks and precise insert positioning across small toolpaths. Ø 16 mm compact cutter for tight toolpaths Secure M08 thread for stable mounting Compatible with LOGU 0303 Kyocera inserts Two cutting edges for balanced machining Precision in a compact format for tight toolpaths The VT310TM is engineered as a screw-in milling cutter with a compact Ø 16 mm body and 46 mm overall length, offering a tight footprint for operations where space is limited. The small diameter supports narrow machining corridors and close-proximity features without sacrificing stability. The design delivers consistent radial run-out and repeatability, which is essential for multi-pass finishing or high-volume component series where dimensional conformity is demanded. Consistent cutting performance with indexable inserts Compatibility with LOGU 0303 indexable inserts (made for Kyocera) means the head provides predictable cutting behaviour and easy refresh of cutting edges. Indexable inserts concentrate wear on a replaceable component rather than the body, lowering life-cycle costs and downtime. The tool features two cutting edges, which balance chip load and reduce vibration during light- to medium-duty milling, producing smoother surface finishes while maintaining economical insert usage. The concept of indexable tooling simplifies process control: when an insert edge dulls, a quick index or replacement restores cutting quality. Secure mounting and straightforward insert change procedure Robust clamping is achieved via the M08 thread, ensuring a rigid connection to compatible holders and minimising micro-movement under load. Insert fixation uses a Torx T8 tool and M3x7 screw for straightforward, secure replacement; this standardised fastening method reduces setup time and supports consistent torque application. The cutter’s construction keeps maintenance routines simple — spare screws and a single Torx key cover common service needs, helping to keep machines productive and changeover predictable. Ideal uses and where value is realised The screw-in head is suited to machining scenarios that require small-diameter cutters with repeatable positioning: pocketing in compact components, finishing of narrow slots, and detail milling where tool accessibility is constrained. The combination of compact geometry, indexed insert economy and secure M08 interface supports lean tool management and predictable machining output. For shops consolidating tooling, this head complements modular holder systems and enables efficient stockkeeping of commonly used insert types. For tailored application advice or to secure the Teknik Makina VT310TM screw-in cutter from Metav Werkzeuge, contact the Emmerich team for specification support and reliable fulfilment — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT310TM Label: 16mm Einschraubfräser LOGU 0303 L46mm Manufacturer: Teknik Makina Core measurements Diameter: 16 mm Overall length: 46 mm Weight: 0.03 kg Thread height: 16 mm Cutting-edge height: 30 mm Cutting edges: 2 Compatibility & features Thread: M08 Compatible inserts: LOGU 0303 indexable inserts Compatible insert maker: Kyocera Torx key: T8 Torx screw: M3x7 FAQ Which insert type is required for this cutter? The cutter accepts LOGU 0303 indexable inserts, compatible with Kyocera-manufactured grades, allowing fast reuse of multiple cutting edges per insert. How is the tool mounted in the holder? Mounting is via an M08 thread; the screw-in interface secures the head to a matching clamping system for minimal run-out and stable milling. How many cutting edges are fitted and what is the machining effect? The head uses two cutting edges, offering balanced chip removal and reduced vibration, suitable for fine finishing and steady axial engagement. What tools are needed to change an insert? Insert fixation uses a Torx T8 driver and an M3x7 screw, which simplifies changeovers and keeps replacement steps uniform across the workshop. Is the cutter suitable for tight or deep pockets? The compact Ø 16 mm body and 46 mm overall length make the tool well suited to narrow pockets and close-feature milling where accessibility and precise positioning are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Screw-In Face Mill 15° For APMT 0903 Indexable Inserts, M8 Thread - Teknik Makina
Benefit from a compact, screw-in cutter that combines a 15° cutting angle with a 16 mm diameter for improved surface finish and low cutting forces; fitted for APMT 0903 indexable inserts and supplied with an M2.5x5.5 Torx screw for secure clamping. Order the tool directly via Metav Werkzeuge or consult their specialists for application advice. Screw-in cutter VT224TM – for APMT 0903 indexable inserts, 15° cutting angle (Teknik Makina) The screw-in cutter VT224TM is a compact milling solution designed for finishing and general steel machining with APMT 0903 indexable inserts, offering a balance of rigidity and accessibility in confined setups Compact 16 mm diameter design 15° cutting angle for fine finishing M8 thread, 25 mm engagement Compatible with APMT 0903 Korloy inserts Lightweight 0.04 kg for easy handling Higher-quality finishes with reduced cutting forces A small radial approach is achieved through the 15° cutting angle, which reduces engagement stress and supports smoother transitions on machined surfaces. The 16 mm diameter combined with two cutting edges enables a controlled finish pass rather than aggressive stock removal, so cycle times are optimised when a high surface quality is required. In practical terms, this geometry lowers the risk of chatter and improves tool life, particularly in interrupted or shoulder milling where stability is paramount. Reliable clamping and straightforward assembly Secure fixation is ensured by the M8 thread with 25 mm engagement and the supplied M2.5x5.5 Torx screw, tightened with a T7 key, giving predictable clamping repeatability for indexable inserts. The low mass of 0.04 kg minimises centrifugal load at higher spindle speeds and simplifies handling during tool changes. These features translate into faster set-ups and fewer corrective adjustments on the machine, reducing downtime and supporting steady production flow. Broad compatibility for workshop flexibility Designed for use with APMT 0903 indexable inserts and compatible with Korloy grades, the tool supports common insert choices for steel machining and finishing operations. The tool’s overall length of 41 mm and a cutting height of 16 mm make it suitable for compact toolholders and tight-stack assemblies without sacrificing cutting capacity. When combined with appropriate insert selection, the system offers consistent chip formation and efficient material removal in finishing cycles. For procurement and tailored technical guidance on the Teknik Cutting Tools screw-in cutter VT224TM, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: VT224TM Brand: Teknik Makina For inserts: APMT 0903 Numeric specifications Diameter: 16 mm Total length: 41 mm Thread: M8 Thread engagement/height: 25 mm Cutting height: 16 mm Number of cutting edges: 2 Cutting angle: 15° Weight: 0.04 kg Torx screw: M2.5x5.5 Special features Compatible with Korloy inserts Supplied with Torx screw for secure clamping Compact screw-in mounting for tight tool arrangements Suited for steel machining and finishing FAQ Which inserts fit this cutter? The VT224TM is designed for APMT 0903 indexable inserts and accommodates common Korloy grades for finishing applications. What is the cutter diameter and length? The tool has a 16 mm diameter and a total length of 41 mm, offering a compact profile for close-tolerance setups. How is the insert secured? Clamping is achieved with an M2.5x5.5 Torx screw (T7 key), providing repeatable fixation for the insert in the M8 screw-in body. Is the tool suitable for steel machining? Yes, the VT224TM is intended for high-quality steel machining and finishing when paired with appropriate inserts. What advantages does the 15° cutting angle provide? A 15° approach reduces radial cutting forces, improving surface finish and lowering the likelihood of vibration during finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Screw-In Face Mill 93° For EPMT 0603 Indexable Inserts, M8 Thread - Teknik Makina
A compact M8 screw‑in cutter with a 93° cutting angle and compatibility for EPMT 0603 indexable inserts. Combines precise shoulder milling, quick insert changes and a lightweight design for efficient tool handling — order the VT230TM directly via Metav Werkzeuge or consult our specialists for application advice. Screw‑in cutter VT230TM — M8 mounting, Ø16 mm, for EPMT 0603 indexable inserts (Teknik Makina) The Screw‑in cutter VT230TM is a compact screw‑in milling head designed for shoulder and face milling with EPMT 0603 indexable inserts in general workshop and production environments. M8 screw‑in mounting Compatible with EPMT 0603 inserts 93° cutting angle for shoulder milling Lightweight 0.04 kg for easy handling Precision and compatibility that keep production moving The VT230TM is engineered to deliver consistent results in repeatable milling operations. Its M8 screw‑in mounting ensures a secure fixation, while the Ø16 mm body and two cutting edges are optimised for controlled material removal. Compatibility with EPMT 0603 indexable inserts — specifically those from Hitachi — simplifies stock management and shortens setup time. The 93° cutting angle is beneficial where a near‑square shoulder is required: the geometry supports stable cutting forces and predictable surface finish, which helps maintain throughput across serial production runs. Fast tool changes and straightforward maintenance Designed with workshop efficiency in mind, the head is secured using a Torx M2.5x5.5 screw that is tightened with a T7 key. This standardised fastening method enables quick insert indexing and minimal downtime during changeovers. The screw‑in thread length of 25 mm provides a robust engagement with the holder, while the modest overall length of 41 mm keeps the assembly compact. Service tasks are therefore straightforward and can be integrated easily into regular maintenance cycles without complex tooling. Designed for repeatable shoulder and face milling With two cutting edges and a defined cutting height of 16 mm, the cutter is suited to operations where accuracy and repeatability matter. The head geometry reduces vibration and distributes cutting loads evenly across the insert seat, which supports longer insert life under comparable conditions. Because the tool is based on a universal indexable insert system, replacement inserts can be sourced quickly, ensuring process continuity and easing procurement for production lines that require predictable supply chains. Lightweight build for ergonomic workshop use and reliable handling At only 0.04 kg, the VT230TM is exceptionally light, which reduces strain when operators handle tool changes and when balancing turret or spindle assemblies. The compact diameter and restrained mass mean the tool is well suited to applications where minimised overhang is advantageous. Combined with the proven mounting standard and insert compatibility, this milling head offers a practical blend of precision, ease of use and operational reliability for workshops and small production facilities alike. For expert guidance on integrating the Teknik Makina screw‑in cutter VT230TM into existing setups, and for prompt delivery from Emmerich, contact Metav Werkzeuge for tailored advice and order support Technical data SKU: VT230TM Name: Screw‑in cutter (Einschraubfräser) For: EPMT 0603 indexable inserts Compatible insert manufacturer: Hitachi Core data Diameter: 16 mm Overall length: 41 mm Thread: M8 Thread length: 25 mm Cutting height: 16 mm Cutting angle: 93° Cutting edges: 2 Weight: 0.04 kg Special features Torx screw: M2.5x5.5 Torx key size: T7 Screw‑in mounting design Suitable for EPMT 0603 indexable inserts FAQ Which indexable inserts fit this cutter? The VT230TM is specified for EPMT 0603 indexable inserts; compatibility with Hitachi EPMT 0603 grades is indicated in the product data. What is the mounting thread and how deep is the engagement? The cutter uses an M8 mounting thread with a thread length of 25 mm for secure engagement. How many cutting edges does the head have and what is the cutting angle? This screw‑in milling head features two cutting edges and a 93° cutting angle, optimised for shoulder and face milling. Which fastening parts are used for the insert? Assembly requires a Torx M2.5x5.5 screw and a T7 Torx key to secure the insert and clamping components. Is the VT230TM suitable for compact turret or spindle assemblies? Yes — the compact Ø16 mm diameter and 41 mm overall length make the VT230TM well suited to confined spaces and compact toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Screw-In Face Mill for APMT 0602 Indexable Inserts, M8 Thread, 4 Flutes - Teknik Makina
Take advantage of a compact, high-precision screw-in cutter body that combines a Ø 16 mm diameter, M8 thread and four cutting edges for stable milling and consistent chip control; order directly via Metav Werkzeuge or consult our specialists for application advice. VT222TM screw-in cutter body – Screw-in milling cutter, Ø 16 mm, M8 thread (Teknik Makina) VT222TM screw-in cutter body designed for short overhang milling and indexable insert use in precision workshops and small-scale production Compact Ø 16 mm screw-in body Secure M8 thread mounting Four cutting edges for chip control Torx screw M1.8×4.1, key T6 Small diameter, big impact on process stability The VT222TM is engineered as a compact screw-in cutter body with a Ø 16 mm shank that reduces overhang-induced vibration and improves surface finish in constrained setups. The combination of a short 42 mm overall length and a lightweight construction (0.03 kg) lowers centrifugal and bending forces, which directly translates into longer insert life and fewer rejects. By using a robust M8 thread for mounting, the tool offers a stable mechanical interface with the holder; this stability is particularly relevant when aiming for repeatable results in series machining or when working with thin-walled components where chatter must be avoided. Secure clamping and straightforward insert changes Clamping is handled via a precisely specified Torx screw M1.8×4.1 and a T6 key drive, ensuring consistent seating of the indexable insert and minimising runout. The design with four cutting edges supports balanced cutting forces, improving chip evacuation and reducing heat concentration at the cutting zone. For maintenance, the simple Torx connection allows fast insert exchange and repeatable reassembly without specialised tools, which shortens machine downtime and keeps production moving. The engineering choice of standardised fastenings also simplifies spare-part handling for workshop technicians. Compatibility, applications and workshop advantages This screw-in cutter body is intended for use with indexable inserts and is listed for use with APMT 0602 style inserts, offering a familiar geometry for many carbide grades and manufacturers such as Korloy. In practice, the tool suits finishing and semi-finishing operations on a wide range of materials where a compact tool body provides an advantage: small-batch work, fixtured components, and multi-axis setups with limited clearance. The robust thread and clamping system contribute to predictable tool performance, which supports cost-effective production planning and inventory control when combined with Metav’s dependable supply chain. For procurement or technical guidance on the Teknik Makina VT222TM screw-in cutter body, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — to discuss compatibility and delivery options Technical data Article number: VT222TM Manufacturer: Teknik Makina eClass: 21180806 Facts Diameter: 16 mm Thread: M8 Overall length: 42 mm Weight: 0.03 kg Cutting edges: 4 Special features Torx screw: M1.8x4.1 Torx key: T6 Suitable for indexable inserts: for APMT 0602 Indexable Inserts Compatible insert manufacturer: Korloy FAQ What insert type fits this cutter body? The VT222TM screw-in cutter body accepts indexable inserts specified as for APMT 0602; the geometry is compatible with standard APMT-style inserts and common grades supplied by manufacturers such as Korloy. Which fastening is used to secure the insert? Clamping is effected with a Torx screw M1.8×4.1 driven with a T6 key, ensuring repeatable seating and straightforward maintenance for the VT222TM cutter body. Is the VT222TM suitable for long-overhang milling? The VT222TM is optimised for short overhang situations; its Ø 16 mm body and 42 mm overall length reduce bending moments and are best for applications where minimising vibration is important. What production benefits does the compact design deliver? A smaller-diameter cutter body reduces deflection and improves surface finish; the VT222TM’s lightweight design (0.03 kg) and balanced four cutting edges support stable cutting and longer insert life. Can this cutter body be used with Korloy inserts? Yes; the VT222TM is compatible with inserts from Korloy that match the APMT 0602 style, providing flexibility in grade selection for different materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Screw-In Face Mill For APXT 1003 Indexable Inserts With Internal Coolant, M08 Thread - Teknik Makina
A compact, high-performance screw-in milling head combining a 16 mm cutting diameter with internal coolant provides improved chip control and prolonged insert life. With a secure M08 thread and compatibility for APXT 1003 indexable inserts from Korloy, machining setups benefit from fast changeovers and consistent results — order directly via Metav Werkzeuge or contact their specialist team for integration support. VT136-1TM screw-in milling cutter — 16 mm, internal coolant, for APXT 1003 inserts (Teknik Makina) The VT136-1TM screw-in milling cutter is designed for indexable-insert milling applications using APXT 1003 inserts, offering a compact 41 mm overall length and integrated coolant for improved process stability. 16 mm cutting diameter Internal coolant for better chip evacuation Compatible with APXT 1003 Korloy inserts M08 thread for secure screw-in mounting Stable chip control for consistent surface quality The integrated internal coolant channel supplies lubricant and coolant directly to the cutting zone, reducing heat at the edge and aiding chip evacuation. This results in fewer built-up edges and a more reliable surface finish during serial production. The compact 41 mm overall length reduces overhang, which helps to limit vibration and maintain dimensional accuracy across a run. For applications where repeatability matters, the combination of coolant-fed cutting and a short tool projection supports stable machining and predictable cycle times. Secure mounting and fast insert changes to reduce downtime A robust M08 screw-in connection with a defined thread height of 16 mm ensures positive seating and repeatable concentricity. The head accepts APXT 1003 indexable inserts, supplied by Korloy, enabling rapid index changes and minimal tool change time. The assembly uses a Torx fixing system (Torx T8) with the specified screw M2.5x5.5, so maintenance routines are straightforward and repeatable. These design choices focus on economic operation: shorter tool-change intervals and reliable clamping reduce unproductive time on the shop floor. Balanced cutter geometry for efficient material removal Equipped with two cutting edges, the milling head balances removal rate and surface quality for general-purpose milling tasks. The specified cutting-edge height of 25 mm delivers adequate edge exposure for stable cutting engagement without excessive overhang. The 16 mm diameter suits medium-finish operations where compact tooling provides better access and control. In production contexts, fewer oscillations and steady chip formation contribute to longer insert life and lower frequency of rework. Practical serviceability and integration into existing toolchains The tool’s light weight (0.05 kg) and standardised interface make it a straightforward addition to existing holders and tool magazines. Internal coolant and standard insert compatibility simplify stock handling, while the clear specification of fastening components supports predictable maintenance. Documentation of the key assembly parts — Torx T8, screw M2.5x5.5 and the M08 thread — ensures spare parts are easily identified and ordering routines remain efficient. The result is a milling solution geared towards consistent throughput and low process variability. Contact Metav Werkzeuge for implementation advice and delivery options for the Teknik Makina VT136-1TM; Metav’s specialists will confirm insert compatibility and help specify the correct holder and coolant routing for seamless integration. Technical data SKU: VT136-1TM Product type: screw-in milling cutter Manufacturer: Teknik Makina eClass: 21180806 Core specifications Diameter: 16 mm Overall length: 41 mm Weight: 0.05 kg Thread: M08 Thread height: 16 mm Number of cutting edges: 2 Cutting-edge height: 25 mm Torx key: T8 Torx screw: M2.5x5.5 Features and compatibility Internal coolant Compatible with APXT 1003 indexable inserts Compatible insert manufacturer: Korloy Screw-in mounting system Category: screw-in milling cutter FAQ Which inserts fit this milling head? The VT136-1TM is specified for APXT 1003 indexable inserts; Korloy inserts in this designation are directly compatible. Does the tool support coolant-through operation? Yes — the tool features internal coolant, supplying coolant close to the cutting edge to assist chip evacuation and thermal management. What is the mounting thread and how is it fastened? The head uses an M08 screw-in thread with a thread height of 16 mm and is secured with the Torx system (Torx T8) using screw M2.5x5.5. How many cutting edges does the head have and what is the edge height? The cutter provides two cutting edges with a cutting-edge height of 25 mm for balanced material removal and finish. Is the VT136-1TM suitable for reduced overhang setups? Yes — the compact overall length of 41 mm is intended to minimise overhang, improving rigidity and reducing vibration during milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Screw-In Milling Cutter For LNMU 0303 Indexable Inserts, M8 Thread, 2 Flutes - Teknik Makina
Take advantage of precise compatibility with LNMU 0303 indexable inserts and the compact Ø 16 mm design for efficient toolholding; the screw-in solution with M8 thread and quick Torx fastening reduces changeover time and supports steady production. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. Screw-in milling cutter VT300TM – screw-in cutter for LNMU 0303 indexable inserts, Ø 16 mm, M8 thread (Teknik Makina) A screw-in milling cutter designed for reliable turning and light milling operations using LNMU 0303 indexable inserts, suited to small to medium batch production and workshop retrofit applications Screw-in design for quick tool change Compatible with LNMU 0303 inserts Ø 16 mm shank, M8 thread Durable two-edge cutting geometry Proven compatibility that simplifies tooling inventories The compact holder is engineered specifically for LNMU 0303 indexable inserts from TNGLY‑OKE, which allows standardisation across tooling racks and reduces the need for multiple adapter sizes. By pairing a standard insert format with a screw-in holder, the system minimises inventory complexity, shortens setup time and ensures consistent seating of cutting edges. This approach benefits production planners who require predictable tool life and repeatable component quality, especially when machining short-run parts. Fast, secure clamping for uninterrupted machining A screw-in connection with M8 thread delivers a secure interface with the machine spindle and toolpost, while the supplied fastening concept—Torx screw M2.5x7 tightened with a T8 key—ensures repeatable torque and stable clamping. The compact fastening arrangement reduces the risk of loosening under intermittent loads, which helps to maintain cutting stability and reduces scrap rates. Quick changeover capability supports lean workflows and lowers non-productive time between operations. Two-edge geometry for consistent surface finish and chip control The holder presents a two cutting edge arrangement that promotes balanced cutting forces and improved surface quality on turned and face-turned features. With a Ø 16 mm effective diameter and a 42 mm overall length, the design limits overhang and vibration while providing adequate access for most standard profiles. Balanced geometry and short overhang translate directly into more predictable tool life and a better finish, particularly on small-diameter parts where rigidity is key. Sourced reliability and partner-supported supply Produced by Teknik Makina and listed as VT300TM, the component is suitable for workshops seeking a compact, compatible holder for LNMU inserts. Supplied through Metav, customers benefit from a tested distribution channel and a partner that focuses on making precision accessible—backed by an extensive product range and structured logistics from Emmerich. The result is dependable availability and support that helps maintain machine uptime and process stability across serial manufacturing. For procurement or application advice on Teknik Makina screw-in holders including the VT300TM, contact Metav Werkzeuge in Emmerich for specification matching and delivery coordination — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT300TM Manufacturer: Teknik Makina Eclass: 21180806 ETIM: EC011860 Diameter: 16 mm Thread: M8 Overall length: 42 mm Cutting edges: 2 Suitable for: LNMU 0303 indexable inserts Compatible insert manufacturer: TNGLY-OKE Torx screw: M2.5x7 Torx key size: T8 FAQ Which insert type fits this holder? The holder accepts LNMU 0303 indexable inserts; compatibility with TNGLY‑OKE inserts is specified for the VT300TM. What is the shank diameter and thread specification? The VT300TM features an effective Ø 16 mm shank and an M8 screw-in thread. Which fastening hardware is required for assembly? Fastening is achieved with a Torx screw M2.5x7, tightened using a T8 key for repeatable clamping. Is the holder suitable for heavy interrupted cuts? The compact design and short overall length (42 mm) favour rigidity; however, for heavily interrupted cutting a more robust system may be recommended depending on specific cutting parameters. How does Metav support bulk or repeat orders of this tool? Metav can coordinate regular supply and advise on stocking strategies to match production needs for items such as the VT300TM and compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Extension For Screw-In Cutter M16 Shaft Ø32mm, 28.7mm Cutter Opening - Teknik Makina
Take advantage of a robust extension that combines a secure M16 thread, a substantial 170 mm overall length and a 32 mm shaft for stable, extended machining operations — order the VT520TM extension directly via Metav Werkzeuge or consult our technical team for compatibility advice. Extension for screw-in cutters VT520TM — Teknik Cutting Tools, M16 thread, 170 mm overall length A VT520TM extension for screw-in cutters engineered to extend cutter reach while preserving rigidity for milling and finishing tasks in industrial and workshop environments. M16 thread for secure mounting 170 mm overall length for extended reach 32 mm shaft diameter for high stiffness Robust 1.26 kg construction for stability Greater reach without compromising rigidity Extending the toolholder length enables access to deeper or recessed workpieces; the VT520TM achieves this with a 170 mm overall length that increases reach while an oversized 32 mm shaft diameter maintains lateral stability. The combination of reach and stiffness reduces deflection during heavy cuts, which in turn improves dimensional consistency and prolongs cutter life. For workshops where space is limited or parts feature deep bores, this extension keeps the cutting geometry predictable and repeatable. Secure connection and reliable compatibility A precise M16 thread and a dedicated opening diameter of 28.7 mm for thread-in cutters ensure a firm mechanical union between extension and cutter. The 40 mm taper/cone length stabilises the seating geometry, reducing micro-movements that can generate chatter. This mechanical certainty supports higher feed rates and consistent surface finish, translating raw specifications into measurable productivity gains on the shop floor. Practical handling and workshop benefits Weighing 1.26 kg, the extension balances inertial mass for steady cutting without becoming unwieldy during tool changes. The solid construction supports robust clamping and repeatable repositioning, which speeds set-up and reduces rework. When combined with standard thread-in cutters, the extension brings productive versatility to milling cells and toolrooms, making it suitable for both prototyping runs and serial production where controlled extension is required. Contact Metav Werkzeuge for a detailed fitment consultation for the Teknik Cutting Tools VT520TM extension and to arrange procurement; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT520TM Manufacturer: Teknik Cutting Tools ECLASS: 21189208 ETIM: EC002219 Dimensions & weight Shaft diameter: 32 mm Cutter opening diameter: 28.7 mm Taper/cone length: 40 mm Overall length: 170 mm Thread: M16 Weight: 1.26 kg Design & features Extension for screw-in cutters (einschraubfräser) Secure M16 threaded connection Tapered seating for reduced runout Designed for industrial milling and finishing FAQ What is the primary purpose of this extension? The VT520TM extension is designed to increase cutter reach while maintaining rigidity; it enables deeper machining with a secure M16 connection. Which cutter shank sizes does the extension accept? The unit features an opening diameter of 28.7 mm, intended for compatible thread-in cutters and standardised seating geometries. How does the extension affect machining stability? By combining a 32 mm shaft with a 40 mm taper, the extension minimises lateral deflection and helps preserve surface quality during longer reach operations. Who supplies this extension and where can it be ordered? The extension is supplied by Teknik Cutting Tools (SKU VT520TM) and can be procured or discussed via Metav Werkzeuge for fitment advice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Extension for Screw-In Milling Cutter 32mm Shank, M16 Thread - Teknik Makina
The combination of a 32 mm shank and a 40 mm long taper delivers extended reach with stable seating for demanding milling operations; the robust M16 thread and 170 mm overall length support secure mounting and improved tool access. Order the extension directly via Metav Werkzeuge or ask the consultants for application-specific advice. Extension for screw-in cutters VT521TM – 32 mm shank, M16 thread (Teknik Makina) The Extension for screw-in cutters VT521TM gives extended tool reach and rigid clamping for CNC milling and workshop applications in which screw-in cutters require secure, low-vibration mounting 32 mm shank for stable clamping M16 thread for secure attachment 170 mm overall length for extended reach 40 mm long taper for rigid seating Extended reach with uncompromised rigidity The VT521TM extension is engineered to extend cutter reach without sacrificing stability. With a 32 mm shank and a 170 mm overall length, the holder increases accessibility to deep or awkward features while maintaining a compact profile that reduces deflection. The 40 mm long taper provides a larger contact surface inside the cutter body, which helps to reduce runout and vibration during high-feed operations. This combination supports consistent chip formation and predictable surface finish for milling tasks. Precision fit that reduces runout and improves process reliability Accuracy in the connection is critical for repeatable results; the M16 thread mates precisely with screw-in cutters and, together with the 28.7 mm cutter opening, ensures a tight mechanical fit. This dimensional accuracy minimises axial and radial play, lowering the risk of chatter and tool failure. For operations where concentricity affects tolerances, the precise interface reduces scrap rates and downstream rework, contributing to more efficient production cycles. Built for workshop and CNC environments with practical handling Weighted at 1.254 kg, the extension offers a reassuring feel for manual setup while remaining suitable for use in automated tool-changing systems. The robust construction supports everyday shop use, from prototype work to serial production. The straightforward geometry facilitates fast inspection and replacement during maintenance, supporting predictable machine uptime. Supplied dimensions and clear technical data make the component easy to specify in tooling lists and BOMs for process planners. Contact Metav Werkzeuge today to discuss how the Teknik Makina extension VT521TM with M16 thread fits into the tooling concept; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: VT521TM Manufacturer: Teknik Makina Total length: 170 mm Shank diameter: 32 mm Cutter opening: 28.7 mm Long taper (insertion): 40 mm Thread: M16 Weight: 1.254 kg Facts Total length: 170 mm Shank diameter: 32 mm Cutter opening: 28.7 mm Long taper: 40 mm Weight: 1.254 kg Special features Suitable for screw-in cutters Designed for CNC milling and workshop applications Secure M16 threaded connection Long taper for improved seating and reduced runout FAQ Is this extension compatible with common screw-in cutter systems? The extension VT521TM is intended for screw-in cutters and features an M16 threaded interface and a 28.7 mm cutter opening to match compatible cutter bodies. What benefits does the 40 mm long taper bring? A 40 mm long taper increases contact area between the extension and cutter, improving seating stability and reducing runout during milling with the VT521TM. Can the extension be used on CNC machines with automatic tool changers? The VT521TM’s dimensions and weight (1.254 kg) make it suitable for many CNC environments; compatibility depends on the machine’s tool-holder specifications and clamping system. How does the 32 mm shank affect tool performance? The 32 mm shank provides a robust cross-section for clamping, which lowers deflection under load and supports consistent finishing when using screw-in cutters. Is the VT521TM suitable for precision finishing operations? Yes—its precise thread fit and long taper contribute to low vibration and improved concentricity, making the VT521TM appropriate for finishing where dimensional accuracy matters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17mm Screw-In Cutter for XNEX 0403 Indexable Inserts L41mm With Internal Coolant, M8 Thread - Teknik Makina
Take advantage of a compact, secure tool that combines internal coolant and a 17 mm diameter for reliable chip control and stable machining results; order the item directly through Metav Werkzeuge or consult their specialists for application advice. Screw-in milling cutter for XNEX 0403 indexable inserts — 17 mm, internal coolant (Teknik Makina) Screw-in milling cutter for light to medium-duty milling where compact size and coolant through capability improve chip evacuation and tool life. 17 mm diameter for compact milling heads Internal coolant for improved chip evacuation Threaded M8 shank for secure mounting Compatible with XNEX 0403 indexable inserts Consistent cooling and cleaner chips for longer tool life The integrated internal coolant channel directs lubricant precisely to the cutting zone, reducing heat build-up and aiding chip evacuation. This targeted cooling helps to maintain cutting-edge geometry and limits thermal wear, which in turn supports longer tool life and more predictable tool-change intervals. For workshop environments where downtime is costly, the combination of controlled cooling and compact geometry delivers a measurable improvement in machining consistency. Robust mounting and accurate cutting geometry for repeatable results Designed with a M8 thread and a thread height of 16 mm, the tool provides a secure mechanical connection to compatible holders. The head features 2 cutting edges with a cutting-edge height of 25 mm, offering balanced cutting forces and low vibration during operation. The supplied T8 Torx interface and M2.5x6.5 Torx screw ensure straightforward assembly and stable fastening of the insert seat. Together, these features reduce runout and support repeatable surface finishes in serial production. Small package, wide workshop compatibility With a compact overall length of 41 mm and a lightweight construction at 0.035 kg, the milling head is suitable where reach and clearance are limited. It accepts XNEX 0403 indexable inserts and is matched to inserts from Tungaloy, enabling simple integration into existing insert inventories. The compact design is particularly useful in setups requiring agile toolpaths or when retrofitting machines with space constraints, while the internal coolant option supports operations that demand improved thermal control. Contact Metav Werkzeuge for tailored application guidance on the Teknik Makina screw-in milling cutter and to confirm the best insert options for the task Technical data SKU: VT244TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter For inserts: XNEX 0403 Facts Diameter: 17 mm Overall length: 41 mm Weight: 0.035 kg Thread: M8 Thread height: 16 mm Number of cutting edges: 2 Cutting-edge height: 25 mm Torx key: T8 Torx screw: M2.5x6.5 Special features Internal coolant Compatible with XNEX 0403 indexable inserts Compatible insert manufacturer: Tungaloy Manufacturer: Teknik Makina FAQ Which indexable inserts fit this tool? The tool accepts XNEX 0403 indexable inserts; it is designed for compatibility with Tungaloy inserts and is listed under SKU VT244TM. Is coolant available through the tool? Yes, the cutter features internal coolant, which supplies lubricant directly to the cutting zone for improved chip removal and reduced thermal stress. How is the cutter mounted to the holder? Mounting is via an M8 thread with a 16 mm thread height; the clamping screw uses a T8 Torx interface and an M2.5x6.5 screw to secure the insert seat. What are the key dimensions to check for machine fit? Key dimensions include the 17 mm diameter, an overall length of 41 mm, and a weight of 0.035 kg; refer to these when checking holder clearance and toolpath envelopes. Can this tool be used in confined or tight-reach applications? The compact overall length and light weight make it suitable for tight-reach situations where a small-diameter milling head and internal coolant are advantageous; see SKU VT244TM for reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Extension For Screw-In Milling Cutter 25mm Shank 20.7mm Opening M12 Thread 40mm Taper Length 0.744kg - Teknik Makina
Take advantage of a practical combination of extended reach and secure clamping: the extension provides a 200 mm overall length with a robust M12 thread and a 25 mm shank diameter to maintain stiffness during deep milling operations. Order the extension directly via Metav Werkzeuge or contact our technical consultants for application advice. Extension for screw-in cutters VT516TM — 200 mm overall length, M12 thread (Teknik Makina) The Extension for screw-in cutters VT516TM is a purpose-made tool extension that increases reach for recessed and deep milling tasks while retaining tool stability for both CNC and manual machining applications 200 mm overall length for extended reach M12 threaded connection for secure mounting 25 mm shank diameter fits standard holders Accepts cutters with 20.7 mm receiving bore Extended reach without sacrificing rigidity Longer tool reach is often necessary for machining recessed features, but length can reduce stiffness and increase vibration. This extension solves that trade-off by offering a 200 mm overall length combined with a 25 mm shank diameter, which preserves axial and lateral rigidity compared with thinner extensions. The design reduces the need for multiple special-length cutters and therefore supports more efficient tool management in the workshop. Fewer tool changes and predictable deflection characteristics contribute to smoother feeds and more consistent surface finishes. Secure seating and repeatable clamping for screw-in cutters For screw-in milling cutters the connection quality determines repeatability. The extension uses an M12 thread and accepts cutters with a 20.7 mm receiving bore, while an internal 40 mm taper ensures precise seating and axial support. These features enable reliable torque transfer from the holder to the cutting head and help maintain concentricity during rotation. The combination of threaded retention and tapered contact gives a balance of positive locking and accurate alignment, which is particularly valuable when machining narrow pockets or when tool run-out must be minimised. Practical workshop advantages and handling Weighing 0.744 kg, this extension is heavy enough to feel substantial yet light enough for straightforward handling during tool changes. The sturdy construction supports workshop routines in both small-scale shops and production environments, including CNC milling centres and manual machines. Fitment is straightforward: screw the cutter into the receiving bore and secure via the M12 thread, ensuring the taper seats fully. For operational safety and best results, final tightening should follow the cutter manufacturer’s torque recommendations and a balance check is advised for high-speed applications. Contact Metav Werkzeuge for tailored application advice and to arrange supply from our Emmerich stock on +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: VT516TM Manufacturer: Teknik Makina Overall length: 200 mm Shank diameter: 25 mm Receiving bore for cutter: 20.7 mm Internal taper length: 40 mm Thread: M12 Weight: 0.744 kg Special features Designed for screw-in milling cutters Tapered seating for repeatable alignment M12 threaded retention for secure mounting Compatible with standard 25 mm toolholders FAQ Which cutters fit this extension? The extension accepts screw-in milling cutters with a receiving bore of 20.7 mm; compatibility is ensured when the cutter’s seating matches the 40 mm taper and the M12 thread type. Is the extension suitable for CNC use? Yes, the extension is designed for both manual machines and CNC milling centres; the 25 mm shank diameter helps maintain rigidity under typical machining loads. How should the cutter be mounted for safe operation? Screw the cutter into the receiving bore, ensure the 40 mm taper is fully seated, then tighten to the cutter manufacturer’s recommended torque; balance checks are advised for high-speed milling. What is the overall length and how does it affect machining? The overall length is 200 mm, which increases accessibility for deep or recessed features while the larger shank diameter helps limit deflection compared with slimmer extensions. Can the extension be used with different holder systems? The extension is intended for standard holders accepting a 25 mm shank; confirmation of holder compatibility should be done against holder specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Insert Screw-On Cutter For RPMT 10T3 Indexable Inserts L51mm With Internal Coolant, M10 Thread - Teknik Makina
Take advantage of the combination of compact design, internal coolant and straightforward insert compatibility for reliable, high‑throughput milling. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina screw-in milling cutter — 20 mm, internal coolant, for RPMT 10T3 Indexable Inserts Teknik Makina screw-in milling cutter for light to medium duty milling applications, engineered for use with RPMT 10T3 indexable inserts and equipped with integrated coolant supply for improved chip control. 20 mm diameter for compact milling Internal coolant for consistent chip evacuation Compatible with RPMT 10T3 indexable inserts M10 screw-in connection for secure mounting Precision and consistent chip control for production runs The 20 mm tool body combines a compact footprint with sufficient rigidity to maintain dimensional stability in repetitive operations. Featuring a direct screw-in mounting, the design reduces runout and vibration, which preserves tool life and contributes to consistent part quality. The cutter accepts RPMT 10T3 indexable inserts, a widely used format that simplifies stocking and replacement. Specification choices such as a moderate overall length and a low mass assist in high‑speed positional changes on modern machining centres, improving cycle-time predictability while maintaining surface finish. Integrated coolant path and robust attachment for process reliability An integrated internal coolant channel feeds coolant directly to the cutting zone, promoting efficient chip evacuation and temperature control during interrupted or continuous cuts. The holder’s M10 screw thread and a thread height of 21 mm ensure secure engagement in compatible clamping systems, while the supplied Torx screw (M3.5x8.5) and required Torx key (T15) provide straightforward assembly. Internal coolant reduces the risk of built-up edge and can extend insert life; it is particularly beneficial when using tougher workpiece materials or when running at elevated cutting speeds on automated equipment. Rapid insert change and production-friendly dimensions Designed with two cutting edges and a cutting height of 30 mm, the tool supports efficient indexable insert use and quick rotation to fresh cutting edges, minimising downtime. At a weight of 0.112 kg and with an overall length of 51 mm, the holder is easy to handle and fits compact tool magazines. The compatibility with Korloy RPMT 10T3 inserts makes replacement simple and cost-effective; indexable tooling lets shops separate the cost of the holder and the expendable inserts for improved inventory management. For identification and ordering, the article is listed as VT290TM, simplifying procurement and stock control. Discuss technical compatibility with Metav Werkzeuge’s specialists to ensure optimal application of this Teknik Makina screw-in milling cutter and arrange supply from Emmerich. Technical Data Article number: VT290TM Product type: Screw-in milling cutter Brand: Teknik Makina Compatible inserts: RPMT 10T3 Compatible insert supplier: Korloy Facts Diameter: 20 mm Overall length: 51 mm Thread height: 21 mm Cutting height: 30 mm Number of cutting edges: 2 Weight: 0.112 kg Thread: M10 Torx screw: M3.5x8.5 Torx key: T15 Special features Internal coolant For indexable inserts RPMT 10T3 Compact, low-mass holder design Quick insert indexing FAQ Which insert type fits this holder? The cutter is designed for RPMT 10T3 indexable inserts; Korloy RPMT 10T3 inserts are specified as compatible with this Teknik Makina screw-in milling cutter (SKU VT290TM). Does the tool supply coolant directly to the cutting edge? Yes, the internal coolant channel delivers coolant to the cutting zone to support chip evacuation and temperature control during cutting with the VT290TM holder. What mounting thread is required in the toolholder or arbor? A M10 screw-in connection with a 21 mm thread height is used for secure engagement with compatible clamping systems for this Teknik Makina tool. How many cutting edges are available before indexing or replacement? The holder uses indexable inserts with two cutting edges, allowing rotation to a fresh edge for fast on-machine recovery. Which tool is needed to fasten the insert screw? An M3.5x8.5 Torx screw secures the insert; the required Torx key size is T15 and is used to tighten or replace inserts on VT290TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Modular End Mill for Korloy APKT 1003 inserts - Teknik Makina
Product Information: Order Number: VT138TM Item: Modular End Mill usable with APKT 1003 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Numbers and Data: Diameter: 20mm Cutting Edges: 3 Weight: 0.097kg Total length: 55mm Cutting Height: 35mm Thread: M10 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
20mm Screw-In Cutter for APXT 1003 Indexable Inserts With Internal Coolant, M10 Thread - Teknik Makina
Take advantage of a compact, secure screw-in solution that combines robust mounting, targeted cooling and broad insert compatibility for reliable milling cycles; order the cutter directly via Metav Werkzeuge or consult our specialists for tailored application advice. Screw-in milling cutter VT138-1TM for APXT 1003 indexable inserts — 20 mm, internal coolant (Teknik Makina) The Screw-in milling cutter VT138-1TM is a 20 mm diameter tool with internal coolant, engineered for use with APXT 1003 indexable inserts and designed to streamline insert changes in production environments. 20 mm diameter for versatile milling Internal coolant for improved chip control Compatible with APXT 1003 Korloy inserts M10 screw-in interface, 55 mm overall length Improved process stability through targeted cooling and chip control The combination of a 20 mm cutting diameter and internal coolant channels places the cooling flow directly at the cutting zone, which reduces tool temperature and supports consistent chip evacuation. For production settings this means fewer interruptions for cleaning and a more stable machining cycle; the focused coolant feed helps to prolong insert life and maintain dimensional consistency while the three cutting edges deliver efficient material removal and balanced cutting forces. Fast exchange and secure mounting to reduce downtime A screw-in design with an M10 interface and a thread height of 20 mm enables quick tool changes and precise seating in modular holders. The head is secured with a Torx screw M2.5x5.5 that requires a T8 key, allowing controlled clamping without additional adapters. The compact 55 mm overall length and low mass (0.097 kg) make handling straightforward and reduce spindle load during index changes, which is particularly useful where frequent insert rotations are part of the process. Broad insert compatibility for flexible inventory management Designed specifically for APXT 1003 indexable inserts and compatible with inserts from Korloy, this cutter supports a common insert family that simplifies stocking and procurement. The cutter’s geometry, including a 35 mm cutting-edge height, accommodates a range of face and slot milling tasks while ensuring repeatable positioning of each insert. For workshops and small production lines, the standardised interface and widespread insert availability deliver both flexibility and predictable performance. For reliable, production-ready milling solutions, contact Metav Werkzeuge to source the Teknik Makina VT138-1TM with internal coolant and discuss the optimum holder and insert combination for specific applications — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: VT138-1TM Product type: Screw-in milling cutter Label: 20mm screw-in cutter APXT 1003 L55mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 55 mm Thread height: 20 mm Cutting edges: 3 Cutting-edge height: 35 mm Weight: 0.097 kg Special features Internal coolant For APXT 1003 indexable inserts Compatible insert manufacturer: Korloy Thread: M10 screw-in interface Securing screw: M2.5x5.5 (Torx), Torx key: T8 FAQ Is this cutter suitable for APXT 1003 inserts? Yes. The VT138-1TM is specifically configured for APXT 1003 indexable inserts and is compatible with Korloy versions of that insert family. Does the tool provide internal coolant supply? Yes. Internal coolant channels deliver fluid directly to the cutting zone, improving chip evacuation and helping to extend insert life under continuous operation. What mounting and fastening are required? The cutter uses an M10 screw-in interface with a 20 mm thread height and is secured by a Torx screw M2.5x5.5, operated with a T8 key for reliable clamping. How many cutting edges does the cutter have and what is the cutting height? The tool has three cutting edges with a cutting-edge height of 35 mm, designed for efficient face and slot milling with balanced cutting forces. What are the overall dimensions and mass of the tool? Overall length is 55 mm and the mass is approximately 0.097 kg, offering a compact footprint and low spindle load. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Cutter for BLMP 0603 Indexable Inserts 2 Cutting Edges, M10 Thread - Teknik Makina
Benefit from the compact M10 threaded design, compatibility with BLMP 0603 indexable inserts and the two cutting edges that ensure stable, repeatable machining; these features reduce setup time and support consistent component quality. Order the VT191TM screw-in milling cutter directly via Metav Werkzeuge or request fitment guidance from our consultants. Screw-in Milling Cutter VT191TM (Teknik Makina) – Ø20 mm, M10 thread A Screw-in Milling Cutter VT191TM designed for precision operations using BLMP 0603 indexable inserts, suitable where compact tooling and quick insert changes are required in milling applications. Ø20 mm body with M10 thread Compatible with BLMP 0603 indexable inserts Two cutting edges, 100° cutting angle Torx M3x6.5 clamp screw, T8 key required Faster, repeatable machining with indexable inserts The compact cutter body and Ø20 mm diameter combine with the M10 thread for a secure, low‑play attachment to toolholders, resulting in consistent performance across runs. Using BLMP 0603 indexable inserts (compatible with Taegutec grades) lets the tool deliver predictable cutting behaviour: the 2 cutting edges and 100° cutting angle promote controlled chip formation and even tool wear. For operations where reproducibility and short changeovers matter, this configuration reduces downtime and simplifies inventory management by standardising on one insert family. Simple set-up and reliable clamping for quick changeovers A short overall length of 48 mm and a thread engagement height of 18 mm make the component easy to position in compact assemblies while maintaining rigidity. The insert is secured with a Torx M3x6.5 clamp screw (T8 key), enabling quick, repeatable clamping torque without special tooling. At just 0.044 kg the head minimises imbalance in high‑speed spindles and helps reduce vibration-related finish defects. Clear mechanical interfaces and standard fastening elements mean fast insertion and secure retention, saving assembly time and lowering the risk of errors during tool changes. Compact design for diverse milling tasks where inserts are preferred This screw‑in cutter is intended for applications that rely on indexable insert technology: small to mid‑size milling tasks where tool space is limited but reliability remains essential. The design focuses on immediate benefits—reduced setup time, standardised inserts and efficient chip evacuation thanks to the cutter geometry—so workshops and production cells can maintain throughput without complex tool inventories. The VT191TM is a practical choice when a dependable, easy-to-service milling head is required for repeatable processes. Secure Teknik Makina's VT191TM through Metav Werkzeuge for assured stock availability and expert advice on toolholder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VT191TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 20 mm Overall length: 48 mm Thread: M10 Thread engagement height: 18 mm Cutting height: 25 mm Number of cutting edges: 2 Cutting angle: 100° Weight: 0.044 kg Clamp screw: M3x6,5 (Torx) Torx key: T8 Special features For BLMP 0603 indexable inserts Compatible insert manufacturer: Taegutec Short, rigid design for compact toolholders Rapid insert change with Torx clamping FAQ What inserts fit this screw‑in cutter? The VT191TM is designed for BLMP 0603 indexable inserts; compatible grades from Taegutec are suitable for most standard milling tasks requiring these insert dimensions. Which clamp screw and key are required for insert replacement? Insert retention uses a Torx M3x6.5 clamp screw; a T8 Torx key is required to apply the correct clamp torque safely. How does the M10 thread affect mounting? The M10 thread provides a secure mechanical connection to standard M10 receptacles or adapters, ensuring stable engagement and reduced radial runout in compact assemblies. Is the tool suitable for high‑speed spindles? With a compact 48 mm overall length and low mass (0.044 kg), the VT191TM minimises imbalance and is appropriate for operations where moderate to high spindle speeds are used, provided the insert grade and machine setup are matched. Can the VT191TM be used with Taegutec inserts? Yes, the cutter is compatible with inserts from Taegutec specified in the BLMP 0603 family, offering flexibility in selecting grades for different materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Cutter for BLMP 0603 Indexable Inserts With Internal Coolant, 3 Cutting Edges, M10 Thread - Teknik Makina
Taking advantage of internal coolant, a secure M10 screw-in connection and compatibility with BLMP 0603 indexable inserts, this cutter delivers reliable chip control and repeatable set-up for consistent batch machining. The combination of compact design, three cutting edges and a lightweight body supports fast index changes and predictable tool life. Order the Screw-in Cutter VT191-1TM directly via Metav Werkzeuge or ask our consultants if needed. Screw-in Cutter VT191-1TM — 20 mm diameter, internal coolant, for BLMP 0603 indexable inserts (Teknik Makina) The Screw-in Cutter VT191-1TM is a dedicated screw-in cutting head designed for use with BLMP 0603 indexable inserts, suited to general milling tasks where secure mounting and coolant delivery to the cutting zone are required Compatible with BLMP 0603 indexable inserts Internal coolant for stable cutting performance M10 screw-in connection with three cutting edges Consistent clamping and insert compatibility for reliable production The VT191-1TM head is built around a secure M10 screw-in connection, providing stable clamping and repeatable positioning at each tool change. Compatibility with BLMP 0603 indexable inserts (Taegutec) simplifies procurement and reduces set-up variability, which is particularly valuable for production runs and mixed-batch work. With three cutting edges, the design balances chip load and surface engagement to maintain machining stability and predictable tool behaviour over repeated indexing cycles. Direct coolant delivery to extend tool life and improve finishes Equipped with internal coolant, the cutter channels fluid directly to the insert seating and cutting zone. This targeted cooling reduces thermal load at the cutting edge, improving edge retention and helping to avoid built-up edge on ferrous materials. The result is a more consistent surface finish and longer intervals between insert changes. For operations where heat control affects tolerance and finish, the internal-feed arrangement supports higher process reliability without requiring complex external setups. Fast serviceability and compact form to keep workshops productive A compact overall length and an engineered cutting height make the head convenient to handle and integrate into existing holders. The system uses a small Torx T8 drive and an M3x6.2 fixing screw for straightforward insert fastening and replacement, enabling quick maintenance cycles. The relatively low mass of the head contributes to reduced toolholder imbalance in high-speed spindles and simpler tool management across a range of fixtures. Clear, repeatable mechanics reduce downtime and support efficient workshop workflows. For tailored tooling recommendations on Teknik Makina screw-in cutters, or to confirm fitment with existing holders and inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and prompt supply. Technical data SKU: VT191-1TM Manufacturer: Teknik Makina ECLASS: 21180806 Label: 20mm Einschraubfräser BLMP 0603 L48mm mit Innenkühlung Core measurements Diameter: 20 mm Overall length: 48 mm Thread height: 18 mm Cutting-edge height: 30 mm Number of cutting edges: 3 Weight: 0.081 kg Special features Thread: M10 Internal coolant: yes Compatible inserts: BLMP 0603 (Taegutec) Torx key: T8 Torx screw: M3x6.2 FAQ Which inserts fit this cutting head? The cutter accepts BLMP 0603 indexable inserts; it is supplied to match Taegutec insert geometries for straightforward replacement and orientation. Is the coolant internal or external? Internal coolant is integrated into the cutter head to deliver fluid directly to the cutting zone, improving heat control and chip evacuation. What is the mounting thread and how secure is the connection? The head uses an M10 screw-in connection designed for rigid mounting and repeatable positioning in compatible toolholders. How many cutting edges does the head have and what is the benefit? The design provides three cutting edges, which balance material removal rate and edge load to support stable cutting and predictable performance. Can this head be used at high spindle speeds? The compact mass and balanced design reduce imbalance risk; suitability for specific spindle speeds should be validated against the machine and holder specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Cutter for EPMT 0603 Indexable Inserts L48mm With Internal Coolant, M10 Thread - Teknik Makina
Benefit from a compact, secure M10 screw-in design with internal coolant and three cutting edges for stable, repeatable milling cycles; order the VT231-1TM directly via Metav Werkzeuge or consult our advisors for specification support. VT231-1TM Screw-in Cutter for EPMT 0603 Indexable Inserts — 20 mm, M10 thread, internal coolant (Teknik Makina) A VT231-1TM screw-in cutter engineered for precise milling with EPMT 0603 indexable inserts, combining a compact 20 mm diameter with internal coolant for improved chip control. 20 mm diameter for compact milling M10 screw-in connection for secure mounting Internal coolant for improved chip evacuation Compatible with Hitachi EPMT 0603 inserts Higher material removal with compact geometry The cutter’s 20 mm diameter and three cutting edges are designed to deliver consistent material removal while keeping the tool envelope small. A 18 mm cutting height provides sufficient engagement for productive passes without excessive overhang, which helps to maintain spindle stability and repeatable surface finish. This geometry reduces cycle time by spreading cutting forces across multiple edges, improving process reliability in short- to medium-run production. Secure mounting and direct coolant supply enhance tool life A robust M10 screw-in connection with a 30 mm thread height ensures a rigid interface between spindle and head, reducing vibration at higher feed rates. The integrated internal coolant directs fluid close to the cutting zone, improving chip evacuation and heat control; the fastening uses a T8 torx drive together with an M2.5x5.5 screw to secure the insert seat. These features together reduce the risk of built-up edge and support longer insert intervals, lowering unplanned tool changes. Broad insert compatibility and fast serviceability Designed for EPMT 0603 indexable inserts and compatible with inserts from Hitachi, the head accepts commonly used insert geometries to simplify stockholding and regrind cycles. The modular screw-in concept allows rapid replacement of worn heads without changing arbor assemblies, minimising downtime. The VT231-1TM is therefore well suited to workshops and subcontract manufacturers that favour standardised insert systems for quick turnaround. Compact length and low mass for versatile set-ups With a 48 mm overall length and a nominal mass of 0.07 kg, the tool keeps the centre of gravity close to the spindle, which is advantageous in confined fixtures and multi-axis machining where minimising overhang is critical. The combination of compactness and internal coolant supports stable cutting in operations where space is limited but process control remains a priority. For customers seeking consistent production performance, this cutter integrates easily into standard tool libraries. Contact Metav Werkzeuge today for application guidance and to arrange supply of Teknik Cutting Tools VT231-1TM screw-in cutters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT231-1TM Label: 20mm Einschraubfräser EPMT 0603 L48mm mit Innenkühlung Manufacturer: Teknik Makina Product type: Einschraubfräser For indexable inserts: for EPMT 0603 Indexable Inserts Facts Diameter: 20 mm Overall length: 48 mm Thread: M10 Thread height: 30 mm Cutting edges: 3 Cutting edge height: 18 mm Weight: 0.07 kg Special features Internal coolant Compatible with EPMT 0603 inserts Compatible with Hitachi insert systems Torx key: T8 Torx screw: M2.5x5.5 FAQ What insert type fits this cutter? The cutter is designed for EPMT 0603 indexable inserts; compatibility with Hitachi EPMT 0603 inserts is specified for the VT231-1TM. Does the cutter provide coolant to the cutting zone? Yes, the VT231-1TM features internal coolant, supplying fluid close to the insert for improved chip control and thermal management. How is the cutter mounted? Mounting is via an M10 screw-in connection with a 30 mm thread height; the insert is secured with a Torx T8 screw (M2.5x5.5). Which operations suit this tool? The tool is intended for compact milling tasks where a small tool diameter, three cutting edges and internal coolant support repeatable metal removal and efficient chip evacuation. What are the physical dimensions and mass? Overall length is 48 mm and the mass is approximately 0.07 kg, making the cutter suitable for confined setups and reduced overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Cutter For LNMU 0303 Indexable Inserts L49mm With Internal Coolant - Teknik Makina
Benefit from a compact, robust milling solution that combines a 20 mm cutting diameter, internal coolant and an M10 screw-in connection for reliable short-turn and finishing operations; order the cutter directly via Metav Werkzeuge or consult our specialists for technical matching. Screw-in milling head for LNMU 0303 indexable inserts (Teknik Makina) — 20 mm, internal coolant The screw-in milling head for LNMU 0303 indexable inserts is designed for versatile milling tasks where stability and coolant supply directly at the cutting zone are essential. 20 mm diameter for compact milling Internal coolant for improved chip evacuation M10 screw-in connection for secure mounting Compatible with LNMU 0303 inserts (Tungaloy) Consistent precision through tailored compatibility The compact 20 mm diameter geometry delivers a stable cutting footprint while allowing access to tighter features on components. By accepting LNMU 0303 indexable inserts, the tool provides a cost-effective route to repeatable results: the proven insert format from Tungaloy offers predictable chip formation and surface finish. This compatibility reduces tooling complexity on the shop floor and simplifies inventory management, enabling reliable indexing and repeatable pocketing operations without compromise. Improved process reliability with targeted coolant supply Equipped with internal coolant, the head supplies lubricant and coolant directly to the cutting edge, which stabilises cutting temperatures and aids chip evacuation. That direct feed reduces thermal expansion in the cutting zone and prolongs insert life, particularly when machining alloys or interrupted cuts. Combined with the three cutting edges, the coolant arrangement helps maintain consistent metal removal rates and reduces the frequency of unscheduled tool changes, supporting higher machine availability and lower unit costs. Secure mounting and straightforward insert changeover A robust M10 thread and a defined thread height of 19 mm ensure the head seats securely and resists loosening under varying cutting loads. The clamp and retention are completed with a Torx T8 access and an M2.5x7 fastening screw, enabling quick and reliable insert replacement with commonly available tools. This mechanical simplicity shortens maintenance cycles and reduces operator handling time, an advantage in short-run production or mixed-batch environments where fast setup is essential. Compact dimensions suited to workshop and production use With a 49 mm overall length, a cutting-edge height of 30 mm and a lightweight construction of 0.061 kg, the tool balances rigidity with low mass for responsive spindle dynamics. The three-flute design provides a compromise between material removal and surface quality, making the head appropriate for finishing and light shoulder milling on a range of materials that the insert system supports. The compact form factor is especially useful in fixtures or multi-spindle arrangements where space is at a premium. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Makina screw-in milling head with internal coolant and M10 mounting for your production needs Technical Data SKU: VT302-1TM Brand: Teknik Makina Product type: Screw-in milling head Facts Diameter: 20 mm Overall length: 49 mm Weight: 0.061 kg Thread height: 19 mm Cutting-edge height: 30 mm Cutting edges: 3 Thread: M10 Special features Internal coolant For LNMU 0303 indexable inserts Compatible inserts manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x7 FAQ Which inserts fit this milling head? The Teknik Makina screw-in milling head (SKU VT302-1TM) is designed for LNMU 0303 indexable inserts; inserts from Tungaloy are specified as compatible for optimal seating and performance. Does the tool provide coolant to the cutting zone? Yes, internal coolant is integrated into the head to deliver coolant directly to the cutting edge, improving chip control and insert life for machining demanding materials. What is the mounting thread and how is the head secured? Mounting is via an M10 screw-in connection with a thread height of 19 mm; final securing uses a Torx M2.5x7 screw accessed with a T8 Torx key. How many cutting edges and what dimensions can be expected? The head carries 3 cutting edges, with a 20 mm diameter, 49 mm overall length and a cutting-edge height of 30 mm, offering a compact, rigid solution for finish and light roughing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Screw-In Cutter for LNMX 0603 Indexable Inserts, M10 Thread, 3 Teeth - Teknik Makina
Take advantage of a compact, screw-in cutter body with Ø 20 mm diameter and M10 thread for secure seating; compatibility with LNMX 0603 indexable inserts and a three-edge configuration supports stable, repeatable milling operations. Order the VT153TM directly via Metav Werkzeuge or ask our consultants if needed. VT153TM Screw-in Milling Cutter for LNMX 0603 indexable inserts — Ø20 mm, M10 thread (Teknik Makina) VT153TM screw-in milling cutter designed for use with LNMX 0603 indexable inserts, offering a short, rigid tool body for reliable milling and finishing tasks Ø 20 mm cutter diameter M10 screw-in thread Three cutting edges for stability Compatible with LNMX 0603 Korloy inserts Consistent chip control and accurate engagement The VT153TM is engineered as a screw-in milling cutter body compatible with LNMX 0603 indexable inserts, which ensures predictable cutting geometry and straightforward insert replacement. The M10 thread provides a firm mechanical connection to the spindle or adapter, reducing micro-movements at the tool seat; this results in consistent chip control and improved dimensional repeatability. The design also incorporates a Torx M3x7 clamping screw, secured with a T8 key, to hold the insert reliably during feed and speed variations. Improved process stability and surface quality A three-edge configuration delivers balanced cutting forces and reduced vibration during operation. This three-cutting-edge arrangement lowers radial loads compared with larger multi-edge heads, making the tool particularly suitable for interrupted cuts or for finishes where surface integrity matters. The compact overall length of 51 mm shortens overhang, increasing stiffness and allowing higher depth-of-cut limits within machine capability, which can translate into shorter cycle times and a more economical cutting process. Simple maintenance and fast insert changes The screw-in concept and standardised insert interface mean serviceability is straightforward: inserts indexed or replaced quickly without specialised fixtures. The use of a Torx M3x7 screw and common T8 key minimises workshop tool diversity and simplifies maintenance routines. As a consequence, tool-change downtime is reduced and toolroom logistics become more predictable, supporting uninterrupted production runs and easier inventory planning for shops using LNMX 0603 inserts. Suitable applications and integration advice This cutter body is a pragmatic choice for operations specifying LNMX 0603 inserts from major suppliers such as Korloy, where a compact, rigid holder is required. The VT153TM integrates into standard toolholders and adapters that accept M10 screw-in interfaces; selection of the correct insert grade and geometry should follow the material and cutting parameters of the specific job. For shops seeking a balance of rigidity and ease of handling, this solution supports both finishing passes and light-medium roughing when paired with appropriate inserts and cutting data. Contact Metav Werkzeuge for availability and technical guidance on the Teknik Makina VT153TM screw-in milling cutter with Ø20 mm diameter and M10 thread Technical data Article number: VT153TM Manufacturer: Teknik Makina Product: Screw-in milling cutter for LNMX 0603 indexable inserts Compatible inserts: LNMX 0603 Compatible insert manufacturers: Korloy Clamping screw: M3x7 Torx Torx key: T8 Core dimensions and numbers Diameter: 20 mm Thread: M10 Total length: 51 mm Cutting edges: 3 Designs and special features Screw-in cutter body design Designed for LNMX 0603 indexable inserts Korloy-compatible insert interface Torx M3x7 clamping screw, T8 key required FAQ Is the VT153TM compatible with all LNMX 0603 inserts? The VT153TM accepts LNMX 0603 indexable inserts; compatibility with specific grades or chipbreaker styles depends on the insert manufacturer (Korloy and others) and the chosen insert geometry. How is the insert secured in the VT153TM? Inserts are fastened with an M3x7 Torx screw; the clamping screw requires a T8 key for secure seating in the VT153TM screw-in cutter body. What advantages does the M10 thread offer for mounting? The M10 screw-in thread delivers a rigid mechanical connection, reducing overhang-related deflection and helping to maintain repeatable cutting geometry when the VT153TM is mounted in compatible toolholders. Can the VT153TM be used for both finishing and roughing? The compact, stiff design and three-edge configuration make the VT153TM suitable for finishing and light to medium roughing when paired with the correct LNMX 0603 insert grade and appropriate cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Cutter for LOGU 0303 Indexable Inserts L54mm With Internal Coolant, M10 Thread - Teknik Makina
Take advantage of a compact, high-performance head that combines 20 mm diameter agility with internal coolant for steady chip evacuation and better tool life; the secure M10 thread and Torx fixing ensure fast, repeatable changes to keep cycle times low. Order the screw-in milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Screw-in milling cutter VT312-1TM – 20 mm, internal coolant (Teknik Makina) Screw-in milling cutter VT312-1TM for precise, compact indexable-head milling applications with LOGU 0303 inserts 20 mm diameter for compact machining Internal coolant for improved chip control Compatible with Kyocera LOGU 0303 inserts Secure M10 threaded connection with Torx fixings Space-saving head that fits tight setups and machines The compact design of this screw-in head delivers clear advantages in constrained fixtures and smaller machines. With a 20 mm diameter and 54 mm total length, the tool reduces overhang and improves rigidity, which lowers vibration and supports consistent surface quality. The reduced mass also helps achieve higher spindle acceleration and shorter positioning times. For operations where access is limited or multiple heads are mounted on smaller arbors, the compact footprint provides a measurable productivity benefit while maintaining the ability to handle shop-floor conditions reliably. Coolant-fed cutting for consistent finish and longer insert life Built-in internal coolant channels supply cutting fluid directly to the cutting zone, which aids temperature control, efficient chip evacuation and improved insert wear behaviour. Combined with the three cutting edges, this approach balances material removal rate and surface quality: heat is dissipated at the source, chips are flushed away, and insert life is extended. For finishing passes or mixed-operation sequences the coolant-fed head contributes to reproducible results and reduces the need for frequent intervention, delivering a more economical process per component produced. Secure mounting and rapid indexable-insert changes The head uses an M10 threaded connection with a designated thread height of 20 mm for a positive, repeatable mounting interface that resists loosening under cutting loads. Fast replacement of the cutting head and inserts is supported by the Torx fixing system (Torx T8) and the Torx screw specification (M3x7), providing a straightforward maintenance routine and reduced downtime. The clear mechanical interface supports consistent runout and concentricity after each change, which is essential when mixing setups or rotating through tool families in production. Streamlined sourcing and workshop integration Compatibility with LOGU 0303 indexable inserts from Kyocera simplifies procurement and inventory: standardised inserts reduce SKUs and speed up replacement cycles. The head’s balanced three-edge arrangement and the 34 mm cutting-edge height make it suitable for a range of light to medium milling jobs across materials commonly encountered in workshops. Combined with Metav’s distribution from Emmerich and product range, this screw-in head can be integrated into an efficient toolset that supports shorter lead times and predictable supply for day-to-day production. For specification advice and immediate availability of the Teknik Makina VT312-1TM screw-in milling cutter, contact Metav Werkzeuge to discuss technical fitment and securing supply from our Emmerich hub Technical Data SKU: VT312-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Designation: for LOGU 0303 Indexable Inserts Facts Diameter: 20 mm Total length: 54 mm Thread: M10 Thread height: 20 mm Cutting edges: 3 Cutting-edge height: 34 mm Weight: 0.06 kg Torx key: T8 Torx screw: M3x7 Special features Internal coolant Compatible with LOGU 0303 indexable inserts Suitable insert manufacturer: Kyocera Screw-in mounting design Compact head for tight setups FAQ What inserts fit this screw-in head? The head is designed for LOGU 0303 indexable inserts; it is compatible with inserts from Kyocera for straightforward replacement and procurement. Does the cutter provide internal coolant? Yes, the cutter features internal coolant channels that deliver fluid directly to the cutting zone to improve chip evacuation and extend insert life. How is the head mounted to an arbor? Mounting is via an M10 threaded connection with a 20 mm thread height; fixation and insert clamping use a Torx system (T8 and M3x7). Is this tool suitable for compact machining stations? The compact 20 mm diameter and 54 mm total length make the head particularly suitable for tight setups and multi-head arrangements where rigidity and low overhang are required. Which brand manufactures this screw-in milling cutter? The screw-in milling cutter is supplied by Teknik Makina and carries the SKU VT312-1TM for identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com
20mm Screw-In Cutter for LOGU 0303 Indexable Inserts L54mm, 3 Flutes M10 - Teknik Makina
Take advantage of a compact system that combines a 20 mm diameter cutting head with an M10 thread and three cutting edges to ensure stable, repeatable machining and reduced changeover times; order via Metav Werkzeuge or request integration advice from our specialists. 20 mm Screw-in Milling Cutter VT312TM for LOGU 0303 indexable inserts — M10 thread, 3 cutting edges (Teknik Makina) 20 mm screw-in milling cutter for LOGU 0303 indexable inserts, designed for secure insert fixing and reliable performance in general machining and CNC applications 20 mm cutting diameter M10 thread connection Three cutting edges, 34 mm cutting height Compatible with Kyocera LOGU 0303 inserts Consistent cutting stability for precision work The compact screw-in milling cutter provides a stable connection via its M10 thread, minimising runout and vibration during machining. The three cutting edges distribute cutting forces effectively, which results in smoother surface finish and predictable tool behaviour. With a 34 mm cutting height and a 20 mm diameter, this head is optimised for medium-duty finishing and face-milling operations, giving process planners reliable data for cycle-time calculation and tool life estimation. Rapid insert changes and secure clamping reduce downtime Compatibility with LOGU 0303 indexable inserts from Kyocera simplifies logistics and reduces the number of different insert geometries on the shop floor. The insert is secured by an M3x7 Torx screw and requires a T8 Torx key, allowing quick, repeatable replacement with standard hand tools. This straightforward fixing system lowers maintenance time and preserves cutting geometry, supporting efficient shift-to-shift operation in both small workshops and production lines. Compact dimensions for versatile fixture options With an overall length of 54 mm and a tool weight of 0.06 kg, the tool head suits confined tool pockets and short-reach machining setups where rigidity matters. The low mass reduces centrifugal stresses at higher spindle speeds while the short overhang helps maintain axial and radial accuracy. The VT312TM design supports integration into modular toolholders and indexed tool systems commonly used in CNC tool magazines. Predictable performance through engineered geometry The three-edge geometry is selected to balance material removal and surface integrity: a favourable compromise between feed capacity and finish quality. For operations that prioritise repeatability, the combination of robust clamping, standardised insert compatibility and a screw-in connection provides a predictable baseline for process development and quality control, making the cutter suitable for both prototype and small-batch production runs. For precision-ready tooling from Teknik Makina and secure supply from Emmerich, contact Metav Werkzeuge for tailored advice and order processing — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VT312TM Manufacturer: Teknik Makina Label: 20mm Einschraubfräser LOGU 0303 L54mm Data Diameter: 20 mm Overall length: 54 mm Cutting height: 34 mm Thread: M10 Number of cutting edges: 3 Weight: 0.06 kg Torx screw: M3x7 Torx key: T8 Special features Compatible inserts: LOGU 0303 (Kyocera) Screw-in mounting for short overhang Standardised Torx screw clamping SKU: VT312TM FAQ How does the M10 thread affect stability in operation? The M10 thread connection ensures a secure screw-in fit; in the VT312TM this reduces runout and improves the repeatability of the cutting head during milling cycles. Which indexable inserts fit this tool head? The cutter accepts LOGU 0303 indexable inserts; compatibility with Kyocera-manufactured inserts simplifies sourcing and replacement in mixed-tool inventories. What tools are required for insert replacement? Insert changes use a Torx T8 key to tighten or loosen the M3x7 Torx screw, enabling quick and consistent replacement without specialised equipment. Is the tool suitable for short-reach finishing operations? Yes — with an overall length of 54 mm and a low weight of 0.06 kg, the design is ideal for applications where a short overhang and high rigidity are required. Can the cutter be integrated into standard CNC toolholders? The compact screw-in form factor and standard thread make the head compatible with common modular toolholder systems, facilitating straightforward integration into CNC tool magazines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Cutter For XNEX 0403 Indexable Inserts 3-Flute, M10 Thread 28mm Cutting Height - Teknik Makina
Take advantage of a compact, insert-compatible toolholder that combines secure fixing, light weight and consistent performance for reliable milling cycles; order the VT245TM through Metav Werkzeuge or consult their technical team for application advice. Screw-in milling cutter VT245TM — for XNEX 0403 indexable inserts, Ø 20 mm, M10 thread (Teknik Makina) The Screw-in milling cutter VT245TM is a compact toolholder designed for SECO XNEX 0403 indexable inserts, engineered for precise light to medium milling tasks in job shops and maintenance workshops Compact M10 thread holder, Ø 20 mm Compatible with SECO XNEX 0403 inserts Three cutting edges, 28 mm cutting height Torx fixing screw M2.5×5.5, T7 key Lightweight 73 g for dynamic milling Predictable insert interchange for efficient production The VT245TM supports SECO XNEX 0403 indexable inserts, enabling quick insert replacement without regrinding. Using standardised insert geometry reduces downtime and simplifies inventory: spare inserts are fitted in seconds, which shortens machine idle time and lowers tooling costs. The design suits serial tasks where repeatability is critical, and the indexable system ensures a consistent cutting edge each time, improving surface finish and dimensional stability. Small diameter, big stability — improved machining dynamics A compact Ø 20 mm body with an M10 thread and a modest mass of 73 g delivers a favourable balance between rigidity and spindle load. The short overall length (46 mm) and three cutting edges provide a stable cut path and reduce chatter at typical spindle speeds for light to medium milling. For operators unfamiliar with indexable tooling, three edges means fewer insert changes per production interval compared with single-edge systems, so cycle planning becomes simpler and more economical. Simple fixation and maintenance for uninterrupted workflows Fast and secure clamping is achieved via the supplied Torx fixing screw (M2.5×5.5) tightened with a T7 key, which keeps the insert pocket immobilised under cutting forces. The screw-in concept with an 18 mm thread engagement ensures a reliable mechanical connection to the holder or arbor. Maintenance is straightforward: the fixing hardware is standard, replacement is quick, and the robust connection reduces the risk of unexpected insert movement during operation, supporting consistent process quality. Right for workshops and small production lines This toolholder is aimed at workshops, maintenance departments and small batch manufacturers who need a compact, insert-compatible solution that minimises tooling complexity. The combination of standard insert compatibility, a compact profile and easy maintenance makes the tool suitable for retrofit operations and modern small-scale machining centres where space, repeatability and accessibility matter most. The product’s features favour predictable tooling costs and streamlined tool management. Contact Metav Werkzeuge for tailored tooling advice and fast dispatch from Emmerich — technical consultants available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: VT245TM Brand: Teknik Makina Designation: Screw-in milling cutter for XNEX 0403 indexable inserts ECLASS: 21180806 ETIM: EC011860 Numbers / Core technical data Diameter: 20 mm Thread: M10 Cutting edges: 3 Cutting height: 28 mm Thread engagement / screw-in height: 18 mm Overall length: 46 mm Weight: 0.073 kg Designs / Special features Compatible inserts: XNEX 0403 Compatible insert manufacturer: SECO Torx fixing screw: M2.5×5.5 Torx key size: T7 Intended use: light to medium milling operations Article type / form: screw-in cutter FAQ What inserts fit this toolholder? The VT245TM is designed for XNEX 0403 indexable inserts, which are widely available and specified for the holder’s pocket geometry. Is the fixing screw standard or specialised? A standard Torx screw (M2.5×5.5) secures the insert; a T7 key is required for tightening and loosening. Can this holder be used on small milling centres? Yes, the compact Ø 20 mm body and M10 thread make the holder suitable for small machines where space and tool projection are constrained. How does the three-edge configuration benefit production? Three cutting edges increase the number of available cutting positions per insert, reducing replacements and improving cost-efficiency for recurring tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Maximise reach and flexibility with screw-in cutters
Screw-in cutters, also known as modular screw-in milling heads or threaded cutter heads, are modular milling tools with a threaded rear that are screwed into extensions or basic toolholders. They allow the tool overhang to be adapted precisely to the depth of the machining area, providing the reach and adaptability required for complex tool and mould work.
Why these modular heads are essential in deep machining
Screw-in cutters are designed so that only the front milling head needs replacing when worn, while the carrier assemblies and extensions remain in service — a setup that reduces tooling costs and simplifies logistics in production environments. Versions without internal coolant rely on external nozzles to feed coolant to the cutting zone, which is adequate for shallow, easily accessible operations but becomes ineffective for deep contours. For deep internal work the industrial standard is screw-in cutters with internal coolant: inner channels run through the connection thread right to the cutting edges, ensuring centred coolant delivery, reliable chip transport and effective heat control.
- the internal coolant supply generates the high flushing pressure necessary to evacuate chips against gravity from narrow cavities
- thermal load on the concealed cutting zone is reduced, lowering the risk of thermal damage and deformation
- improved chip evacuation prevents spalling and vibration, dramatically reducing the likelihood of tool breakage during extended overhangs
Practical benefits that improve throughput and cost-efficiency
- replaceable milling heads cut tooling expenditure and inventory complexity
- modular carrier systems and extensions reduce retooling and shorten changeover times
- reliable chip evacuation and cooling increase tool life and process stability
- consistent performance for deep cavities minimises scrap and rework
Metav as your precision partner for modular tooling
As a specialist partner, Metav brings decades of expertise and a broad offering that suits industry and workshops alike. With over 48,000 customers and a catalogue spanning more than 250,000 products, Metav combines a pragmatic supply chain from Emmerich with technical competence that helps engineers specify the right screw-in cutters and supporting extensions. If you need advice on selecting a modular screw-in milling head or determining the correct internal coolant routing for a cavity, our technical team can advise on specifications and compatibility.
In short: screw-in cutters provide modular reach, cost-effective head replacement and indispensable internal coolant performance for deep, confined machining.
FAQ
What is the difference between screw-in cutters with internal coolant and those without?
Screw-in cutters with internal coolant feature internal channels that feed coolant directly to the cutting edges via the connection thread, providing the flushing pressure required to evacuate chips from deep cavities; cutters without internal coolant rely on external nozzles and are suitable only for shallow, easily accessible operations.
How do modular screw-in milling heads reduce tooling costs?
Because the design allows only the worn front milling head to be replaced while the carrier and extensions remain in use, modular screw-in milling heads lower component consumption and simplify inventory management, leading to clear cost savings over time.
Which machining scenarios require threaded cutter heads with internal coolant?
Threaded cutter heads with internal coolant are essential when machining deep bores, cavities or internal contours where chips must be transported out against gravity and where external coolant cannot reach the cutting zone reliably.
Can long extensions be used with screw-in cutters without compromising chip evacuation?
Long extensions are feasible, but reliable chip evacuation under long overhangs depends on internal coolant delivery; without it, external coolant will often be blocked by deep part walls and chip clogging becomes a significant risk.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com