Modular screw-in cutters for adaptable deep machining
Screw-in cutters are modular milling tools designed to be screwed into extensions or toolholders to adjust overhang for deep or recessed machining and to make tool systems more economical by allowing only the front milling head to be replaced; they are indispensable in tool and mould making for such reasons. Where machining requires coolant delivered through the tool, internal cooling provides continuous, directed supply through channels to the cutting edges, whereas designs without internal cooling rely on external nozzles and suit only very shallow, easily accessible operations. For deep cavities and long extensions, the combination of long extensions and internal coolant ensures high flush pressure to evacuate chips against gravity, reduce thermal load and prevent chip clogging and vibration. Key advantages include improved tool longevity, higher process reliability and easier tool maintenance, with the primary use being precision metalworking and cavity finishing.
20mm Screw-In Cutter for XNEX 0403 Indexable Inserts With Internal Coolant, M10 Thread - Teknik Makina
Take advantage of the secure M10 thread, internal coolant and compact 20 mm diameter to achieve consistent, repeatable milling performance with indexable inserts; order the tool via Metav Werkzeuge or consult our specialists for configuration support. VT245-1TM thread-in cutter by Teknik Makina — 20 mm, internal coolant The VT245-1TM thread-in cutter for XNEX 0403 indexable inserts is a compact screw-in milling solution designed for precision face and shoulder milling where coolant delivery and stable clamping are essential 20 mm cutting diameter Integrated internal coolant M10 thread for secure mounting Compatible with Tungaloy XNEX 0403 inserts Precise milling performance with coolant-fed stability The compact milling head delivers consistent geometry control thanks to its 20 mm diameter and three-flute configuration. The three cutting edges enable balanced cutting forces and a smoother surface finish when using XNEX 0403 indexable inserts. Internal coolant supply reduces heat at the cutting zone, which helps to preserve insert life and maintain dimensional stability on longer runs. The screw-in design with an M10 thread provides a rigid connection to the toolholder, limiting runout and improving repeatability in serial production or batch work. Efficient chip control and maintenance advantages A coolant-fed design combined with the three cutting edges promotes controlled chip evacuation and lowers the risk of built-up edge formation. The tool’s cutting-edge height of 28 mm supports sufficient cutting depth for many finishing and semi-finishing operations while remaining compact at an overall length of 46 mm, making it suitable for confined setups. The available Torx retention hardware (Torx key T8, screw M2.5x6.5) simplifies insert changes and torque reproducibility, reducing maintenance time and potential for assembly errors. Practical fitting and workshop integration Installation and replacement are straightforward due to the standard screw-in interface and documented torque procedure for the retention screw. With a mass of 0.073 kg, the cutter presents minimal overhang load on the arbor, supporting stable spindle dynamics in light to medium machining tasks. Compatibility with Tungaloy XNEX 0403 indexable inserts ensures access to a wide range of grades and geometries for different materials and cutting conditions, providing flexibility for both prototyping and production applications. For procurement or technical configuration of Teknik Makina cutting tools such as the VT245-1TM, contact Metav Werkzeuge for expert advice and direct ordering assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: VT245-1TM Manufacturer: Teknik Makina Dimensions & Core Data Diameter: 20 mm Total length: 46 mm Thread height: 18 mm Cutting-edge height: 28 mm Cutting edges: 3 Weight: 0.073 kg Features & Compatibility Thread: M10 Internal coolant: yes Compatible inserts: XNEX 0403 Compatible insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x6.5 FAQ Is this cutter compatible with XNEX 0403 indexable inserts? Yes. The VT245-1TM thread-in cutter is designed for use with XNEX 0403 indexable inserts and the geometry supports standard insert seating for that series. Does the tool provide internal coolant supply? Yes. The cutter features internal coolant, allowing effective delivery of cutting fluid directly to the insert cutting zone. Which thread and retention hardware are required for mounting? The cutter mounts with an M10 thread and uses a Torx retention screw (Torx key T8, screw M2.5x6.5). How many cutting edges does the cutter have and what is the cutting-edge height? The tool uses three cutting edges and has a cutting-edge height of 28 mm. What are the compactness and weight characteristics relevant for toolholder load calculations? Overall length is 46 mm and the tool weighs 0.073 kg, supporting reduced overhang and stable spindle dynamics in many setups. What is the article number or SKU for ordering? The SKU for ordering is VT245-1TM Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Face Mill For ADMX 0702 Indexable Inserts 5 Teeth, M10 Thread, 90° Cutting Angle - Teknik Makina
Take advantage of a robust M10 screw-in connection, a compact Ø20 mm cutting diameter and five cutting edges to maintain steady production; order the VT201TM screw-in cutter via Metav Werkzeuge or consult our specialists for compatibility advice. VT201TM screw-in cutter — Ø20 mm, M10 thread for ADMX 0702 indexable inserts (Teknik Makina) The VT201TM screw-in cutter is a compact milling head engineered for reliable shoulder and face milling with ADMX 0702 indexable inserts, ideal for industrial and workshop toolrooms requiring quick insert changes and secure fastening. M10 screw-in connection Ø20 mm cutting diameter Five cutting edges for stable cutting Compatible with ADMX 0702 inserts Compact design for consistent results The VT201TM is designed to deliver consistent cycles through a compact, lightweight construction. The combination of a Ø20 mm cutting diameter and a total length of 49 mm reduces tool overhang and improves rigidity, which in turn lowers vibration and improves surface finish. With a net weight of 0.08 kg, the head contributes minimally to spindle imbalance while enabling faster tool changes and reduced set-up times. This design supports predictable machining performance and helps maintain process stability on small to medium machining centres. Secure fastening and straightforward insert replacement Fastening is achieved with a Torx screw M2x4.2 using a T6 key, enabling a secure clamping force that keeps the insert rigid under load. The screw-in interface with an M10 thread gives a reliable mechanical connection to the toolholder, simplifying assembly and removal without the need for additional locking devices. Compatibility with ADMX 0702 indexable inserts means commonly available inserts can be used, reducing stock complexity. The robust clamp system lowers the risk of insert displacement, supporting uninterrupted machining and predictable tool life. Geometry tailored for precise face and shoulder milling The cutter’s geometry features a 90° cutting angle, which is optimised for square shoulder milling and accurate contouring operations. Five cutting edges distribute cutting forces across multiple points of contact, reducing individual insert load and improving heat dissipation. The result is a smoother cutting action and longer insert service intervals compared with fewer-edge heads in the same diameter class. For operations that prioritise repeatable edge quality and dimensional control, this head’s geometry offers a measurable improvement in cycle reliability. Practical supply and expert backing from Metav Sourcing the VT201TM through Metav Werkzeuge brings immediate supply-chain advantages: central European stock and experienced technical support reduce lead times and uncertainty. Metav’s emphasis on accessible precision and a broad product range helps workshop managers consolidate suppliers and rely on consistent quality standards. If selection between insert grades or holder types is required, Metav’s team can provide tailored recommendations to align the cutter’s performance with the machining task and production cadence. For tailored advice and secure supply of the Teknik Cutting Tools VT201TM screw-in cutter, contact Metav Werkzeuge for specification support and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VT201TM Product: Screw-in cutter for ADMX 0702 indexable inserts Manufacturer: Teknik Makina Compatible insert manufacturer: Pramet Facts Diameter: 20 mm Thread: M10 Thread length: 19 mm Cutting height: 30 mm Cutting edges: 5 Overall length: 49 mm Weight: 0.08 kg Cutting angle: 90° Torx screw: M2x4.2 Torx key: T6 Special features Compatible with ADMX 0702 indexable inserts Inserts: ADMX 0702 Fastening: Torx screw M2x4.2 Fastening tool: T6 key FAQ Is the VT201TM compatible with ADMX 0702 inserts? Yes. The VT201TM screw-in cutter is specified for ADMX 0702 indexable inserts and accepts those insert dimensions. What thread does the cutter use for mounting? The cutter mounts with an M10 screw-in thread and a thread length of 19 mm as specified for the VT201TM. Which tool secures the insert and what screw is used? A Torx screw M2x4.2 secures the insert; tightening and removal are performed with a T6 Torx key. What are the cutter’s dimensions and weight? The head has a Ø20 mm cutting diameter, an overall length of 49 mm, a cutting height of 30 mm and weighs 0.08 kg (SKU VT201TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Face Mill For APMT 0602 Indexable Inserts, M10 Thread, 5 Flutes - Teknik Makina
Take advantage of a robust combination of precise fit, compact design and straightforward maintenance for reliable milling performance; order the VT223TM directly via Metav Werkzeuge or consult the technical team for application support. Screw-in cutter VT223TM — Teknik Makina (M10 thread, 20 mm diameter) The Screw-in cutter VT223TM is a compact screw-in milling head engineered for indexable APMT inserts and short overhang machining in milling and finishing operations. M10 thread, screw-in mounting 20 mm diameter for compact tooling For APMT 0602 indexable inserts Five cutting edges for stable cutting Lightweight at 0.06 kg Faster cycle times through a compact, rigid design The VT223TM's M10 thread and 20 mm diameter provide a compact connection that reduces overhang and vibration, which directly improves surface finish and increases feed rates. The short overall length and lightweight construction translate to less spindle load and faster acceleration between cuts — a tangible efficiency gain in high-mix, short-run production. For shops that measure productivity in cycles per shift, the reduced chatter and improved stability deliver measurable time savings without complex set-up changes. Simple insert change and tool maintenance for uptime A single Torx M1.8×4.1 clamping screw (Torx key T6) secures the insert, enabling quick index changes and repeatable seating. The straightforward fastening geometry cuts changeover time and lowers the risk of incorrect clamp torque; this means fewer stoppages and predictable tool life. The unit's five cutting edges allow for balanced cutting forces and consistent chip formation, which helps to extend insert life when paired with suitable feeds and speeds. Broad compatibility and predictable integration with existing tooling Designed for use with APMT-style indexable inserts and compatible with Korloy insert ranges, the tool integrates into common inventory systems and reduces the need for specialised holder stock. The standardised screw-in interface supports fast replacement in modular setups and simplifies logistics for maintenance teams. Where process reliability matters, this compatibility reduces the number of toolholders required while maintaining flexibility across different finishing tasks. For everyday workshop reliability: durability and handling The VT223TM is manufactured to withstand routine workshop use while remaining light enough for quick handling during set-up changes. The combination of a robust screw-in connection and a simple clamping system makes the tool suited for precision finishing and semi-finishing on a variety of workpieces. When paired with correct inserts and cutting parameters, operators can expect consistent performance and lower rework rates — attributes that support both quality targets and delivery reliability. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Makina VT223TM for your production line; technical consultants are available to discuss insert choices, clamping torque and recommended feeds and speeds Technical data Article number: VT223TM Manufacturer: Teknik Cutting Tools Weight: 0.06 kg Diameter: 20 mm Thread: M10 Overall length: 51 mm Thread length: 20 mm Cutting edges: 5 Torx screw: M1.8x4.1 Torx key: T6 Compatible inserts manufacturer: Korloy Facts Diameter: 20 mm Overall length: 51 mm Thread length: 20 mm Thread size: M10 Weight: 0.06 kg Number of cutting edges: 5 Special features Screw-in mounting for compact toolset-ups Lightweight design for reduced spindle load Quick-change Torx clamping screw, T6 key Compatible with APMT-style indexable inserts Manufacturer: Teknik Cutting Tools FAQ Which inserts fit this cutter? The VT223TM is designed for APMT-style indexable inserts (specified as APMT 0602 in the product designation) and works with Korloy APMT-compatible types; verify seat dimensions before assembly. What is the thread size and mounting method? This cutter uses an M10 thread with screw-in mounting for secure, compact connection to modular toolholders. How many cutting edges does the tool support and what is the benefit? The tool features five cutting edges, which provide balanced cutting forces and contribute to smoother chip removal and more consistent surface finish. Which Torx screw and key are required for clamping? Clamping is performed with a Torx M1.8×4.1 screw; a T6 Torx key is required for insert changes. Is the VT223TM suitable for long-reach milling? The VT223TM is optimised for short overhang applications; its compact 20 mm diameter and 51 mm overall length are intended to reduce vibration and improve stability in close-coupled setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Face Mill for APMT 0903 Indexable Inserts with Internal Coolant, M10 Thread - Teknik Makina
Take advantage of a compact design with 20 mm cutting diameter, internal coolant and secure M10 screw-in mounting for stable, repeatable performance; order the VT225-1TM screw-in milling cutter directly via Metav Werkzeuge or consult our advisors for application-specific guidance. VT225-1TM Screw-in milling cutter – 20 mm diameter, internal coolant (Teknik Makina) The VT225-1TM screw-in milling cutter is a compact tool designed for indexable APMT 0903 inserts, intended for reliable slotting and face milling in production and workshop environments. 20 mm cutting diameter Internal coolant for improved chip control M10 screw-in mounting for secure fitting Stable clamping reduces downtime and improves repeatability A secure clamping interface is vital in repeated production runs. The tool features an M10 thread and a compact screw-in design that provides a rigid connection to the holder, reducing vibration and minimising run-out. This stability translates directly into consistent surface finish and fewer rejected parts, supporting higher first-pass yields and more predictable machining cycles. Internal coolant keeps cutting edges cool and chips clear Integrated internal coolant directs cutting fluid precisely to the insert seat, enhancing lubrication and thermal control at the cutting zone. Better cooling reduces thermal expansion of the insert and tool holder, which helps maintain tolerances during longer cuts. Enhanced chip evacuation also lowers the risk of built-up edge, contributing to extended insert life and fewer unscheduled tool changes. Broad compatibility with industry-standard inserts for flexible tooling Engineered for APMT 0903 indexable inserts and compatible with Korloy grades, the cutter provides immediate integration into common tooling systems. The combination of a proven insert geometry with a three cutting edges arrangement ensures efficient material removal while balancing cutting forces. This compatibility enables quick retrofit into existing setups without changes to programming or fixturing. Compact dimensions for efficient material removal in constrained setups With a 20 mm diameter and an overall length of 48 mm, the tool is sized for operations where space and access matter. The geometry supports both slotting and face milling tasks while keeping the tool overhang to a minimum, which helps to maintain rigidity. The tool’s lightweight construction reduces spindle load and contributes to faster accelerations during cyclic production. Discuss machining requirements with Metav Werkzeuge for tailored recommendations on the VT225-1TM and to secure prompt delivery from Emmerich. Technical data SKU: VT225-1TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Compatible inserts: APMT 0903 (Korloy) Internal coolant: yes Facts Diameter: 20 mm Overall length: 48 mm Cutting-edge height: 30 mm Thread height: 18 mm Thread: M10 Number of cutting edges: 3 Weight: 0.071 kg Special features Internal coolant channel Torx key: T8 Torx screw: M2.5x5.5 Screw-in mounting for secure fit Designed for industrial metalworking applications FAQ What inserts fit this screw-in milling cutter? The VT225-1TM is designed for APMT 0903 indexable inserts and is confirmed compatible with Korloy APMT 0903 grades, allowing straightforward integration with common insert stocks. Is coolant supply supported through the tool? Yes, the Teknik Makina VT225-1TM features an internal coolant channel that delivers fluid directly to the insert seat for improved cooling and chip control. What mounting thread is required for installation? The cutter uses an M10 screw-in mounting with a thread engagement height of 18 mm for a rigid connection to the holder. How many cutting edges does the tool provide and what is the benefit? The tool has three cutting edges; this configuration balances material removal rate and cutting forces, supporting smooth operation and efficient chip formation. Is the VT225-1TM suitable for short overhang, high-precision tasks? With a 20 mm diameter and a 48 mm overall length, the tool is optimised for reduced overhang and improved rigidity, supporting precision-focused production work. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Face Mill For EPMT 0603 Indexable Inserts 3 Cutting Edges, 18mm Tooth Height, M10 Thread - Teknik Makina
Take advantage of a compact Ø20 mm cutting diameter combined with a robust M10 threaded shank and compatibility with EPMT 0603 indexable inserts for reliable, repeatable milling; order directly via Metav Werkzeuge or consult our specialists for tool selection. VT231TM screw-in milling cutter by Teknik Makina – Ø20 mm, M10 thread for EPMT 0603 indexable inserts The VT231TM screw-in milling cutter is a compact insert milling head designed for secure, repeatable machining with EPMT 0603 indexable inserts in light-to-medium industrial and workshop applications. Ø20 mm cutting diameter M10 threaded shank, 30 mm thread length Compatible with EPMT 0603 inserts (Hitachi) Three cutting edges, 93° cutting angle Predictable cutting performance for consistent results The insert milling head delivers stable chip engagement thanks to its three cutting edges and a 93° cutting angle, which together provide a near-square shoulder capability and even load distribution across the insert. This geometry reduces vibration and promotes consistent surface finish when performing slotting or face milling operations. For users unfamiliar with indexable tooling: the insert is a small, replaceable carbide plate that gives precise cutting geometry without the need to regrind the whole tool, lowering running costs and simplifying maintenance. The compact diameter also makes the cutter suitable for confined setups where controlled material removal is required. Fast, secure clamping and straightforward replacement A robust M10 threaded shank with a 30 mm thread length creates a strong mechanical connection to the toolholder, while the included fixing hardware — Torx M2.5×5.5 screw tightened with a T7 key — ensures the insert seat remains secure under load. The 18 mm insert pocket height provides reliable clamp support and adequate seating for the EPMT 0603 plates. These features reduce tool-change time and minimise downtime on the shop floor, since insert swaps are quick and do not require specialist equipment. The modest 48 mm overall length and low mass (0.07 kg) make handling and tool changes less cumbersome in compact machining cells. Standardised compatibility and workshop practicality Designed to accept EPMT 0603 indexable inserts, the milling head benefits from wide availability of insert grades and geometries, including options supplied by recognised manufacturers such as Hitachi. Standardisation simplifies inventory management and helps maintain productivity: a single cutter body accommodates a variety of insert grades for different materials and finishes. The tool’s design is aimed at professionals seeking a balance between ease of use and industrial robustness — ideal for maintenance workshops, toolrooms and production lines where predictable, repeatable performance is essential. Contact Metav Werkzeuge GmbH for tailored advice on Teknik Makina’s VT231TM screw-in milling cutter and assistance with selecting the correct EPMT 0603 insert grade and toolholder; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT231TM Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 48 mm Thread length: 30 mm Cutting edge height: 18 mm Number of cutting edges: 3 Cutting angle: 93° Weight: 0.07 kg Special features For EPMT 0603 indexable inserts Compatible insert manufacturer: Hitachi Thread: M10 Fixing screw: Torx M2.5×5.5 Torx key size: T7 FAQ Which inserts fit this milling head? The VT231TM accepts EPMT 0603 indexable inserts; common grades from Hitachi are compatible depending on the workpiece material. What torque or key is required to secure the insert? The insert is retained with a Torx M2.5×5.5 screw that is tightened using a T7 key; ensure the screw is seated firmly to avoid movement under load. Is the tool suitable for shoulder milling and slotting? Yes — the 93° cutting angle and three cutting edges provide reliable performance for near-square shoulder milling as well as slotting in light-to-medium operations. How does the M10 thread benefit workshop use? The M10 threaded shank with a 30 mm thread length gives a strong mechanical connection to standard toolholders, reducing the risk of loosening and improving repeatability. What advantages come from using indexable inserts with this cutter? Indexable inserts allow quick replacement when worn, lower tooling cost per cut and flexible selection of insert grades for different materials without replacing the entire cutter Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Face Mill For LNMU 0303 Indexable Inserts, 3 Cutting Edges, M10 Thread, 49mm Length - Teknik Makina
Take advantage of a compact, secure mounting solution that combines Ø 20 mm cutting diameter, an M10 thread and 3 cutting edges for consistent, balanced cuts — order the screw-in cutter directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in cutter VT302TM for LNMU 0303 indexable inserts — Ø 20 mm, M10 thread (Teknik Makina) The Screw-in cutter VT302TM is a purpose-built milling head designed for use with LNMU 0303 indexable inserts, offering quick insert changes and stable mounting for precision small-part machining. Secure M10 screw-in connection Compact Ø 20 mm cutting head Three cutting edges for balanced performance Torx M2.5x7 screw with T8 key for fast changeovers Faster changeovers through straightforward insert fastening The tool is optimised for rapid plate replacement: the use of a Torx M2.5x7 clamping screw together with a T8 key enables controlled torque application and repeatable seating of the indexable plate. Short set-up times translate directly into higher machine uptime, while the standardised insert size LNMU 0303 ensures broad availability of cutting grades. This configuration supports efficient workflows on multi-shift production lines and reduces non-productive time during tool changes. Compact mounting that improves stability and surface quality A M10 thread and a Ø 20 mm head create a low-profile, secure connection to toolholders, improving rigidity and reducing deflection in light milling or finishing operations. The cutter’s 3 cutting edges deliver balanced radial forces, which helps to lower vibration and improves surface finish without sacrificing material removal rate. For workshops seeking consistent results on small components, this geometry offers a reliable compromise between accessibility and cutting stability. Practical compatibility for flexible tooling concepts Compatibility with LNMU 0303 indexable inserts and recognisable clamping hardware makes the cutter suitable for modular tooling strategies. The VT302TM supports quick adaptation between grades and geometries of indexable plates — an advantage when alternating between soft and moderately hard materials. The standard screw and insert format simplifies stock-keeping and allows rapid selection of a cutting grade that matches the workpiece and machining parameters. Supplied and supported for dependable workshop use Manufactured by Teknik Cutting Tools and distributed via Metav, the cutter forms part of a broad offering aimed at rationalising procurement and maintaining supply continuity. Metav’s presence in Emmerich functions as a quality filter for the European market, combining a large product range with logistics and technical advice. The result is fewer suppliers to manage and a dependable route to replenishment when consumables and toolheads are required. Contact Metav Werkzeuge for tailored application advice on the VT302TM screw-in cutter and to arrange prompt delivery from Emmerich. Technical Data Article number: VT302TM Product name: Screw-in cutter Application: for LNMU 0303 indexable inserts Facts Diameter: 20 mm Thread: M10 Overall length: 49 mm Cutting edges: 3 Torx screw: M2,5x7 Torx key: T8 Compatible insert manufacturer: TNGLY-OKE Manufacturer: Teknik Makina Special features Secure screw-in mounting Compact design for small-part machining Standard insert compatibility Fast insert change via Torx clamping FAQ What insert type does this cutter accept? The cutter accepts LNMU 0303 indexable inserts; the VT302TM is configured specifically for that plate format to ensure correct seating and repeatable performance. Which thread and mounting standard does the tool use? Mounting is via an M10 screw-in connection, giving a compact and rigid interface to compatible toolholders. How many cutting edges are on the cutter and what is the benefit? The cutter is equipped with 3 cutting edges, providing balanced cutting forces for reduced vibration and improved surface finish on small components. What screw and key are required for insert clamping? Clamping uses a Torx M2.5x7 screw; a T8 Torx key is the recommended tool for secure and repeatable tightening. Who supplies and distributes this cutter in Europe? The VT302TM is manufactured by Teknik Cutting Tools and distributed via Metav Werkzeuge for the European market Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Milling Cutter For APMT 0903 Indexable Inserts 15° Cutting Angle, M10 Thread - Teknik Makina
Take advantage of a compact tool holder that combines a secure M10 screw-in connection with a 20 mm nominal diameter and compatibility for APMT 0903 indexable inserts to reduce set-up time and simplify inventory. Order the screw-in cutter directly via Metav Werkzeuge or ask the consultants for further advice. Screw-in cutter VT225TM – M10 thread, 20 mm diameter (Teknik Cutting Tools) The Screw-in cutter VT225TM is a compact tool holder for APMT 0903 indexable inserts, designed to provide a secure M10 mounting and a 20 mm nominal diameter for milling operations using standard triangular inserts 20 mm nominal diameter M10 screw-in thread Compatible with APMT 0903 inserts Three cutting edges, 18 mm cutting height Secure clamping and quick insert changes for continuous production The VT225TM combines a robust M10 screw-in interface with a dedicated Torx M2.5x5.5 clamping screw and a T7 key size to ensure reliable seating of APMT 0903 indexable inserts. This arrangement stabilises the insert during cutting and simplifies replacement: the indexable insert can be rotated or exchanged without regrinding, which shortens maintenance intervals and reduces machine downtime. The restrained weight of 0.071 kg supports rapid tool changes and minimal spindle imbalance. Consistent cutting performance and improved surface quality A nominal diameter of 20 mm, a 15° cutting angle and three cutting edges deliver predictable chip formation and balanced cutting forces. The 18 mm cutting height gives adequate support for APMT 0903 inserts while maintaining a low radial overhang, which benefits dimensional stability. Explaining briefly: indexable inserts are replaceable cutting tips fixed to the tool body, enabling repeatable geometry and constant edge condition. This helps to maintain process consistency across serial production runs. Compact geometry that suits workshop inventories and flexible setups With an overall length of 48 mm and a thread engagement height of 30 mm, the cutter offers a compact profile that suits tight toolposts and modular toolholders. Compatibility with Korloy-manufactured APMT 0903 inserts reduces the number of stocked insert types needed for mixed-machine shops. Built for straightforward handling, the tool holder's compact design supports ergonomic assembly and efficient storage, aligning with Metav's focus on accessible precision and dependable supply from Emmerich. For purchasing advice or technical clarification on the Teknik Cutting Tools screw-in cutter VT225TM, please contact Metav Werkzeuge in Emmerich — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VT225TM Manufacturer: Teknik Makina Product: Screw-in cutter for APMT 0903 indexable inserts Compatible inserts: APMT 0903 (Korloy) Key dimensions Diameter: 20 mm Thread: M10 Cutting height: 18 mm Thread height: 30 mm Number of cutting edges: 3 Overall length: 48 mm Weight: 0.071 kg Cutting angle: 15° Special features Torx screw M2.5x5.5 Torx key size T7 Suitability: for APMT 0903 indexable inserts ECLASS: 21180806 ETIM: EC011860 FAQ Which indexable inserts fit this cutter? The VT225TM is designed for APMT 0903 indexable inserts; compatibility with Korloy-manufactured APMT 0903 inserts is specified for the Teknik Cutting Tools screw-in cutter. What are the nominal diameter and thread form? The cutter has a nominal diameter of 20 mm and an M10 screw-in thread, as listed for the VT225TM tool holder. How many cutting edges does the tool accept and what is the cutting height? The tool body accommodates three cutting edges with a cutting height of 18 mm for each installed APMT 0903 insert. Which fastening hardware is used for insert clamping? Clamping is effected with a Torx M2.5x5.5 screw; a T7 Torx key is the recommended drive for secure tightening of the VT225TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Milling Cutter for RDMT 1003 Indexable Inserts Internal Coolant, 55mm Overall Length - Teknik Makina
Take advantage of the combination of precise mounting, internal coolant and compact 20 mm diameter for consistent machining results; order the screw-in milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in milling cutter VT098-1TM – 20 mm diameter, internal coolant (Teknik Makina) A screw-in milling cutter VT098-1TM designed for use with RDMT 1003 indexable inserts, offering compact mounting and integrated coolant for stable material removal in workshop and small-batch production 20 mm diameter for compact milling heads Internal coolant for extended tool life M10 screw-in mount for secure fixing Compatible with RDMT 1003 indexable inserts Boosted productivity through targeted cooling and compact design The combination of a 20 mm cutter body with internal coolant focuses lubricant and coolant directly at the cutting zone, reducing temperatures and improving chip evacuation. This targeted cooling helps maintain cutting edge stability, which in turn lowers the frequency of tool changes and minimises unplanned downtime. The compact form factor supports tight setups and close-tolerance operations without compromising rigidity, delivering a tangible increase in machining throughput for demanding small-batch production runs. Secure clamping and straightforward insert handling for quicker set-ups A robust M10 screw-in mount and a lightweight construction ensure rapid, repeatable mounting while maintaining concentricity during high-speed milling. The tool accepts RDMT 1003 indexable inserts, allowing fast insert changes with the specified Torx fixing (T15) and screw M3,5x7, which simplifies maintenance procedures. Reduced set-up time and the ability to change cutting edges quickly translate into improved shop-floor efficiency and a lower overall cost per part in repetitive machining tasks. Designed for reliable performance and easy integration With a 55 mm overall length, two cutting edges and a compact thread height, this milling head is engineered for stable performance in confined tool magazines and multi-spindle arrangements. The internal cooling channel keeps the interface between insert and workpiece consistently lubricated, supporting predictable surface finish and dimensional repeatability. For production managers seeking a conservative, high-availability solution, the unit’s light weight and proven geometry help maintain cycle consistency across varying workpiece materials and part geometries. For tailored advice on integrating the Teknik Makina screw-in milling cutter into existing toolholders or for procurement via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert support Technical data Article number: VT098-1TM Brand: Teknik Makina Product type: Screw-in milling cutter eClass: 21180806 Core dimensions Diameter: 20 mm Overall length: 55 mm Weight: 0.087 kg Cutting-edge height: 35 mm Thread height: 20 mm Number of cutting edges: 2 Special features Internal coolant: yes Thread: M10 Compatible inserts: RDMT 1003 Torx key: T15 Torx screw: M3,5x7 FAQ Which inserts fit this milling head? The milling head accepts RDMT 1003 indexable inserts; the geometry is optimised for that insert family to ensure secure seating and reliable cutting performance. Is the tool equipped for through-coolant supply? Yes, the product features internal coolant, which delivers lubricant directly to the cutting zone for improved tool life and surface quality. What is the mounting thread for the cutter? The cutter is mounted with an M10 screw-in thread designed for secure, repeatable fixation in compatible holders. How many cutting edges does the cutter have? The tool is supplied with 2 cutting edges, balancing material removal rate and surface finish for small to medium-sized operations. What is the article number or SKU for ordering? The SKU for this item is VT098-1TM, which should be quoted when enquiring or ordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Screw-In Milling Cutter for RDMT 1003 Indexable Inserts, 2 Cutting Edges, M10 Thread - Teknik Makina
Take advantage of a compact, precision-engineered screw-in cutter with Ø 20 mm and M10 thread that accepts RDMT 1003 indexable inserts; reliable clamping and a lightweight design help keep tool changeovers short and spindle load low. Order the tool directly via Metav Werkzeuge or ask the consultants for compatibility details. Screw-in cutter VT098TM — Ø 20 mm, M10 thread (Teknik Makina) The screw-in cutter VT098TM is a compact milling head designed for systems using RDMT 1003 indexable inserts, offering secure clamping and straightforward integration into standard toolholders. Compatible with RDMT 1003 inserts Ø 20 mm with M10 thread Two cutting edges for stable cuts Secure clamping with M3.5 locking screw High process reliability through standardised dimensions The compact geometry of this milling head ensures consistent performance in repeated operations. With a Ø 20 mm body and an M10 thread, the tool provides a predictable interface for the toolholder, which minimises set-up variation and shortens machine downtime. Designed for insert systems, the head accommodates RDMT 1003 indexable inserts and delivers a stable engagement thanks to its two cutting edges, supporting steady chip evacuation and repeatable surface results. Rapid insert changes and robust clamping reduce downtime Maintenance routines are simplified by the straightforward fastenings: a locking screw M3.5 and a Torx screw M3.5x8.5 secure the insert reliably, while the required T15 Torx key enables quick, safe access. This fastening concept reduces changeover time and lowers the risk of incorrect clamping; the combination of positive seating and screw retention gives a dependable connection between the insert and cutter body, which is particularly useful in production environments where cycle time and process stability are critical. Compact, lightweight design for stable toolpaths At a total length of 55 mm and a mass of just 0.087 kg, the milling head offers low overhang and reduced dynamic loads on the spindle, improving rigidity during transverse cuts. The 35 mm cutting height and 20 mm thread engagement are balanced to give sufficient cutting depth while maintaining the mechanical stiffness required for precise operations. The two cutting edges promote even load distribution and predictable wear, making this head a suitable choice for workshops seeking consistent finishing and dependable repeatability. Contact Metav Werkzeuge for tailored technical advice and to order the Teknik Makina screw-in cutter VT098TM for RDMT 1003 indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: VT098TM Designation: Screw-in cutter for RDMT 1003 indexable inserts Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Facts Diameter: 20 mm Thread: M10 Total length: 55 mm Cutting edges: 2 Thread height: 20 mm Cutting height: 35 mm Weight: 0.087 kg Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 Special features Compatible with RDMT 1003 indexable inserts Files: 62de7e4a33927e49dbf32744, 62de7ee2bd24461b3d5f7a69 Lightweight design for low spindle load Compact length for short overhangs FAQ Which insert type fits this cutter? The cutter is designed for RDMT 1003 indexable inserts; the TekÂniÂk MaÂkiÂna screw-in cutter (SKU VT098TM) accepts that insert form directly. What is the thread and interface specification? The VT098TM features an M10 thread interface and standardised dimensions that ensure proper seating in M10 toolholders. How many cutting edges does the tool provide? This screw-in cutter from Teknik Makina is equipped with 2 cutting edges, offering balanced load distribution and steady cutting performance. Which fastening hardware is required for insert changes? Insert clamping is secured with a locking screw M3.5 and a Torx screw M3.5x8.5; a T15 Torx key is specified for safe, quick changes. What are the overall length and weight of the milling head? The VT098TM has a total length of 55 mm and a weight of 0.087 kg, characteristics that contribute to reduced overhang and improved rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
220mm Extension For Screw-In Cutter 32mm Shank, M16 Thread - Teknik Makina
Take advantage of the secure M16 thread, the 220 mm overall length and the robust 32 mm shaft to extend machining reach without compromising rigidity — order or request a compatibility check via Metav Werkzeuge for reliable supply and advice. Extension for screw-in cutters — Teknik Makina, M16 thread, 220 mm Extension for screw-in cutters extends the reach of screw-in milling cutters and is designed for deep-pocket and heavy-duty milling operations where a robust, vibration-resistant extension is required M16 threaded connection for secure fastening 220 mm overall length for extended reach 32 mm shaft diameter for rigid clamping Fits cutters with a 28.7 mm screw-in opening Secure connection for consistent machining performance The extension adapter is engineered to prioritise a precise, stable connection between machine spindle and cutter. The M16 thread ensures a positive, repeatable joint that reduces the risk of loosening under load, while the substantial 32 mm shaft diameter increases torsional stiffness and helps maintain concentricity. For production environments where dimensional consistency matters, this solution reduces runout and supports predictable cutting forces, resulting in improved surface quality and longer tool life. Extended reach without sacrificing stiffness With an overall length of 220 mm, the shaft extension enables access to recessed features and deeper cavities that standard holders cannot reach. The design balances reach and rigidity: the 40 mm cone engagement provides axial support at the cutter end, and the adapter’s mass (approx. 1.33 kg) helps dampen vibration during intermittent cuts. This combination is particularly valuable in setups where tool overhang is unavoidable but component tolerances remain tight, allowing productivity gains without compromising part accuracy. Straightforward integration and workshop reliability Installation follows conventional screw-in cutter practice and the adapter mates to cutters with a 28.7 mm opening, reducing the need for bespoke fixtures. Constructed to industrial standards, the component is suitable for robust daily use and compatible with standard milling toolchains. Information on dimensions and thread form supports seamless specification in procurement and maintenance documentation, and the adapter’s clear mechanical parameters facilitate planning for balance, clamping torque and spindle load. For technical compatibility checks, availability and order processing, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930; Metav’s specialists will advise on fitment and lead times and help place the order. Technical data Article number: VT522TM Manufacturer: Teknik Makina ECLASS: 21189208 ETIM: EC002219 Dimensions / core technical data Shaft diameter: 32 mm Screw-in cutter opening: 28.7 mm Cone length (engagement): 40 mm Overall length: 220 mm Weight: 1.33 kg Special features / design Thread: M16 Application: extension for screw-in cutters Robust shaft for reduced runout Designed for heavy-duty milling reach FAQ What cutters are compatible with the extension adapter? The extension adapter is compatible with screw-in cutters that have an opening of 28.7 mm and a matching screw-in interface; check the cutter seat dimensions before selection. How does the M16 thread improve stability? An M16 threaded connection provides a positive mechanical joint that maintains clamping force under cutting loads, reducing micro-movement and improving machining accuracy. Is the adapter suitable for high-speed milling? The adapter is intended for heavy-duty reach applications; consult spindle speed and balance specifications to confirm suitability for specific high-speed operations. What measures reduce vibration when using a long extension? Use the shortest possible effective overhang, ensure correct balancing, and verify clamping torque; the adapter’s 32 mm shaft diameter and cone engagement help damp vibrations. Can the extension be used with tapered toolholders? This extension is designed for screw-in cutter systems; compatibility with tapered toolholders depends on the specific interface and must be verified against holder and cutter specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
220mm Extension For Screw-In Cutter M16, 32mm Shank Ø 28.7mm Opening - Teknik Makina
Combine extended reach with a robust M16 connection and a stable Ø 32 mm shank to keep milling processes uninterrupted; benefit from the enhanced fit for screw-in cutters and order via Metav Werkzeuge or consult our specialists for specification support. Extension for screw-in cutters VT523TM — arbor extension with M16 thread and Ø 32 mm shank (Teknik Makina) The Extension for screw-in cutters VT523TM provides increased reach and a secure connection for workshop and CNC milling operations, designed to accept standard screw-in cutters and to be used where an extended tool projection is required. M16 thread for secure clamping Shank Ø 32 mm for stable interface 220 mm overall length for extended reach 28.7 mm opening for screw-in cutter fit Greater reach with maintained rigidity An extended tool projection is achieved with a 220 mm overall length while rigidity is preserved by the Ø 32 mm shank, which reduces deflection under load and maintains concentricity during milling. This combination enables fewer tool changes on complex components and supports longer-reach operations without compromising finish quality. The design is intended for industrial workshop settings and is suitable where a dependable arbor extension is required for screw-in tooling. Reliable connection and proven cutter compatibility The mechanical interface is defined by the M16 thread and a precision opening of 28.7 mm, together with a 40 mm taper that ensures the screw-in cutter seats securely. These features allow the cutter to be clamped with minimal play, which is essential for repeatable results in serial production. The VT523TM is therefore well suited to accept commonly used screw-in cutters and to integrate with existing arbor systems; the secure thread connection supports consistent machining performance. Built for workshop continuity and easy handling Weighing 1.324 kg, this extension balances solidity and manageable handling for tool set-up and changeover. The component is manufactured for professional use and is intended to reduce downtime by offering a standardised interface that simplifies tool matching. Where tool path length or accessibility is a constraint, the extension provides a practical solution that keeps processes efficient and supports reliable throughput in daily production environments. For technical selection or to secure supply of the Teknik Makina extension with an M16 connection, contact Metav Werkzeuge for personalised advice and assured delivery from Emmerich. Technical data Article number: VT523TM Manufacturer: Teknik Makina Product: Extension for screw-in cutters Weight: 1.324 kg ECLASS: 21189208 ETIM: EC002219 Facts Overall length: 220 mm Shank diameter: Ø 32 mm Screw-in cutter opening: 28.7 mm Taper length (screw-in cutter): 40 mm Thread: M16 Weight: 1.324 kg Special features Suitable for screw-in cutters Designed for extended reach applications Stable shank for secure clamping Manufacturer SKU: VT523TM FAQ Which machines are compatible with this extension? The extension is compatible with machines that accept standard screw-in cutters and arbors featuring an M16 thread; the Extension for screw-in cutters VT523TM by Teknik Makina is dimensioned for systems that accommodate a shank of Ø 32 mm. How is the cutter secured in the extension? The cutter is secured by the M16 thread and seated against the 40 mm taper, with a 28.7 mm opening that ensures correct positioning and clamping for the Extension for screw-in cutters VT523TM. Will using the extension affect machining accuracy? Extending the tool projection necessarily influences stiffness, but the Ø 32 mm shank and secure thread interface of VT523TM are designed to minimise deflection and preserve repeatability in standard workshop tasks. What are the overall length and weight of the extension? The component has an overall length of 220 mm and a weight of 1.324 kg, as specified for the Extension for screw-in cutters VT523TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
250mm Extension For Screw-In Milling Cutter 25mm Shank, M12 Thread - Teknik Makina
The VT519TM extension combines a 250 mm overall length with a 25 mm shank and an M12 threaded connection to extend tooling reach while maintaining machining stability; order the extension directly from Metav Werkzeuge or consult our specialists for specification support. VT519TM Extension for Screw-in Milling Cutters — 250 mm overall length, M12 thread | Teknik Makina A robust VT519TM extension for screw-in milling cutters designed to increase reach in milling operations where a longer tool projection is required without sacrificing stability 250 mm overall length for extended reach M12 threaded connection for secure mounting 25 mm shank diameter for rigid support Greater reach without compromising rigidity The extension delivers an extended working length of 250 mm, enabling access to deep pockets and hard-to-reach contours while preserving tool stability. The 25 mm shank diameter provides a solid bearing surface in the spindle or holder, which helps to reduce vibration and runout during aggressive cuts. By combining increased length with a substantial shank cross-section, the component supports consistent machining accuracy and predictable surface finish, making it suitable for extended operations where standard holders would limit access. Secure, standardised mounting for screw-in cutters Designed for compatibility with threaded cutter systems, the extension features an M12 thread and an insertion opening of 20.7 mm, and a taper seating length of 40 mm to ensure reliable axial alignment. The internal geometry supports stable engagement of screw-in cutters: the cutter screws onto the arbor and the extension maintains concentricity, reducing the likelihood of misalignment. The straightforward threaded connection permits rapid tool changes while the conical seat improves load transfer between cutter and extension. Integrates into extended milling setups and CNC workflows The component is aimed at professional workshops and production environments that require extended tooling reach in milling or finishing tasks. The increased projection supports specialised set-ups where access constraints are a primary concern, and the solid construction contributes to predictable tool life. The extension is appropriate for both CNC machining centres and rigid manual milling machines where threaded cutter systems are already in use, allowing existing toolsets to be adapted for longer-reach applications without redesigning fixturing. Practical handling and specification guidance With a net weight of 1.165 kg, the extension has sufficient mass to damp minor vibrations while remaining manageable during handling and tool changes. The 40 mm taper length and the 20.7 mm cutter opening are key dimensions for matching with existing screw-in cutters; customers are advised to verify cutter internal diameters and manufacturer torque recommendations before assembly. For preparations involving balancing or special holders, the measured shank and thread data support planning for clamping and runout control in high-precision setups. For ordering and detailed specification assistance for this Teknik Makina extension, please contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide tailored advice for integrating the VT519TM into existing toolchains Technical data Article number: VT519TM Manufacturer: Teknik Makina Weight: 1.165 kg Measurements / core data Overall length: 250 mm Shank diameter: 25 mm Cutter opening (inner): 20.7 mm Taper seating length: 40 mm Design & features Thread: M12 Intended for screw-in milling cutter systems Solid, single-piece construction FAQ What is the overall length of the extension? The VT519TM extension has an overall length of 250 mm, providing extra reach for deep or obstructed machining tasks. Which thread is used for mounting? Mounting is via an M12 threaded connection, designed for secure engagement with compatible screw-in cutter systems. What shank and cutter opening diameters are specified? The extension has a 25 mm shank diameter and an internal cutter opening of 20.7 mm to receive threaded milling cutters. How long is the taper seating for the cutter? The conical seating length is 40 mm, which supports accurate axial alignment and transmission of cutting forces. Is the VT519TM suitable for CNC and manual machines? Yes; the extension is intended for integration into both CNC machining centres and rigid manual milling setups that employ screw-in cutter tooling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
250mm Extension For Screw-In Milling Cutter Shaft Ø25mm, M12 Thread - Teknik Makina
Take advantage of the 250 mm overall length, 25 mm shaft stiffness and secure M12 thread to extend screw-in milling cutters for deep or hard-to-reach cuts; this combination supports stable machining and fewer setup changes. Order the VT518TM directly via Metav Werkzeuge or consult our specialists for matching to specific applications. Extension for Screw-in Milling Cutters VT518TM — 250 mm overall length, 25 mm shaft (Teknik Makina) The Extension for Screw-in Milling Cutters offers a rigid, long-reach adapter intended for use with screw-in milling cutters in CNC machining centres and workshop milling machines, enabling access to recessed features and deeper pockets while maintaining a controlled connection to the cutting tool. 250 mm overall length for extended reach 25 mm shaft for high stiffness M12 thread for secure screw-in mounting 1.17 kg balanced mass for stable operation Greater reach with predictable machining outcomes The long adapter delivers a 250 mm overall length that extends the effective working envelope of screw-in cutters, reducing the need for additional part re-clamping or multiple setups. With a 25 mm shaft the extension preserves axial rigidity relative to smaller-diameter options, which helps to control deflection during interrupted cuts. The result is fewer programme changes and a smoother production flow when machining deep pockets or stepped components on CNC machines. Secure seating for improved concentricity and surface quality A reliable mechanical connection is the basis for reproducible results. The VT518TM uses an M12 thread and an internal seating arrangement with a 40 mm cone and a 20.7 mm opening, providing a firmly located interface between extension and cutter. This geometry reduces runout, which in turn improves surface finish and extends cutter life; in practice, correct seating and clean contact faces are decisive for minimising radial deviation during high-speed rotation. Stable dynamics and workshop durability Weighing 1.17 kg, the extension contributes mass that influences the tool system’s dynamic behaviour. That balanced mass can attenuate minor vibrations and support stable operation across a range of spindle speeds, provided the machine’s toolholding and feeds are matched accordingly. The robust dimensions favour consistent repeatability in series production, helping to keep rejects low and process times predictable. Integration into efficient supply and service workflows Sourcing the VT518TM through Metav Werkzeuge brings practical benefits for industrial and trade customers: local stock management in Emmerich, an extensive product range to reduce supplier numbers, and decades of precision expertise that support reliable procurement decisions. This combination of technical fit and dependable supply ensures workshop requirements are met with minimal administrative overhead. For tailored technical matching and prompt supply from Metav Werkzeuge, request personalised advice from our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VT518TM and its suitability for specific machining tasks. Technical Data SKU: VT518TM Manufacturer: Teknik Makina Facts Overall length: 250 mm Shaft diameter: 25 mm Shaft opening: 20.7 mm Cone length (seating): 40 mm Thread: M12 Weight: 1.17 kg Special features Extension for screw-in milling cutters Secure screw-in mounting Designed for extended-reach milling applications FAQ What sizes and interfaces does the extension use? The VT518TM from Teknik Makina features a 25 mm shaft, a 20.7 mm opening and an M12 thread, providing the defined mechanical interface for compatible screw-in milling cutters. How does the 250 mm length affect rigidity? With an overall length of 250 mm, the extension increases overhang; however, the larger shaft diameter helps to maintain stiffness, so deflection is reduced compared with thinner extensions in similar conditions. Is the VT518TM suitable for CNC machining centres? Yes. The extension is intended for use in CNC machining centres and workshop mills where screw-in cutters are employed and longer reach is required. How does the seating geometry influence runout? The 40 mm cone seating and defined opening support precise axial location, which reduces radial runout and contributes to improved surface finish and cutter life when correctly mounted. What should be considered regarding mass and dynamics? At 1.17 kg, the extension adds rotating mass that alters the tool system dynamics; spindle speed and feed should be selected with the toolholder and workpiece rigidity in mind to avoid chatter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Indexable Screw-In Cutter for APMT 0903 Indexable Inserts, 4-Flute M12 Thread 15° Clearance 22mm Cutting Height, M2.5x5.5 Torx - Teknik Makina
Take advantage of the combination of precise screw-in mounting, compatibility with standard APMT 0903 indexable inserts and compact dimensions for reliable, repeatable milling results in small to medium machining setups — order via Metav Werkzeuge or consult our specialists for application advice. VT226TM screw-in milling cutter for APMT 0903 – 25 mm, M12 thread (Teknik Makina) The VT226TM screw-in milling cutter designed for secure screw-in mounting with APMT 0903 indexable inserts, aimed at efficient face and light shoulder milling where quick change and stable cutting are required 25 mm cutting diameter, M12 screw-in thread Four cutting edges for balanced cutting 15° cutting angle for improved chip control Compatible with APMT 0903 Korloy inserts Higher stable material removal with controlled chip flow The VT226TM screw-in milling cutter combines a 25 mm diameter with a 15° cutting angle and four cutting edges to produce a stable cutting action that helps maintain consistent surface finish and productivity. The geometry supports efficient chip formation and evacuation which reduces recutting and vibration. For production runs where repeatability matters, this holder enables more predictable tool life when matched with the correct APMT 0903 indexable inserts and cutting data. Fast, reliable mounting reduces machine downtime The screw-in design with an M12 thread and a thread engagement of 35 mm offers a secure mechanical connection that simplifies set-up. Fixing is via an M2.5x5.5 Torx screw tightened with a T7 key, providing repeatable clamping torque and quick replacement cycles. With an overall length of 57 mm and a compact form factor, the cutter minimises overhang and helps keep rigidity high — a clear advantage when aiming to increase feed rates without compromising stability. Broad compatibility and practical workshop handling Intended for use with APMT 0903 indexable inserts and compatible with inserts from Korloy, this screw-in holder is suited to many standard milling tasks where those inserts are used. The 22 mm cutting height allows full engagement of the insert pocket and supports comfortable regrinding or insert rotation during service intervals. At just 0.116 kg, the holder is easy to handle during tool changes and tooling inventory management, making it a practical choice for busy tool rooms. Built for routine maintenance and predictable service life Compact dimensions and straightforward fastening reduce service complexity: the insert pocket geometry and screw interface are designed for repeatable seating and easy access. Regular checks of the Torx screw and insert seating prevent loosening under cyclic loads. The solid screw-in interface and clear identification of key dimensions assist maintenance planning and reduce the risk of incorrect assemblies — a tangible benefit for shops that prioritise uptime and process reliability. For enquiries about integrating the Teknik Cutting Tools screw-in milling cutter VT226TM into existing toolholders, or for sourcing compatible APMT 0903 inserts, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for case-specific advice and immediate supply options Technical data Article number: VT226TM Manufacturer: Teknik Makina / Teknik Cutting Tools ECLASS: 21180806 ETIM: EC011860 Key figures Diameter: 25 mm Thread: M12 Thread engagement length: 35 mm Overall length: 57 mm Cutting height: 22 mm Number of cutting edges: 4 Cutting angle: 15° Weight: 0.116 kg Materials & features Suitable for indexable inserts: APMT 0903 Compatible insert manufacturer: Korloy Fastening screw: M2.5x5.5 Torx Torx key required: T7 Product type: screw-in milling cutter FAQ Which indexable inserts fit the holder? The holder accepts APMT 0903 indexable inserts; compatibility with Korloy inserts is specified for the VT226TM screw-in milling cutter. What thread is required for mounting? Mounting uses an M12 screw-in thread with a 35 mm thread engagement length for secure clamping. Which fastening components are used for the insert? Insert securing is performed with an M2.5x5.5 Torx screw; a T7 Torx key is recommended for assembly and disassembly. What are the key dimensions to consider for tool set-up? Important dimensions are the 25 mm diameter, 57 mm overall length and 22 mm cutting height — these determine reach, rigidity and insert engagement. Is the cutter heavy to handle during tool changes? With a mass of 0.116 kg, the holder is lightweight and convenient for frequent tool changes and workshop handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Indexable Screw-In Cutter For RPMT 1204 Inserts With Internal Cooling, M12 Thread - Teknik Makina
Combining a compact 25 mm diameter with internal coolant and an M12 screw-in fitting delivers increased rigidity, reliable chip evacuation and longer insert life. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Screw-in milling cutter for RPMT 1204 indexable inserts — 25 mm, internal coolant (Teknik Makina) The Screw-in milling cutter is a coolant-fed, screw-in cutting head designed for precise face and shoulder milling with RPMT 1204 indexable inserts in compact setups. 25 mm diameter for compact milling Internal coolant for reliable chip evacuation M12 screw-in fitting for secure mounting Compatible with Korloy RPMT 1204 inserts High stability and consistent material removal for production This cutter is engineered for repeatable results in series production. Its 25 mm diameter and two cutting edges give a favourable balance between rigidity and metal removal rate, reducing vibration and improving surface finish. The screw-in design with an M12 seating ensures a secure connection to a compatible arbor, which translates to predictable cutting forces and consistent tolerances. For operations where cycle time and process stability matter most, the cutter’s geometry helps maintain tool life and minimise rework. Coolant-fed design that extends insert life and improves productivity Built-in internal coolant directs cutting fluid close to the cutting zone, which supports efficient chip evacuation and temperature control. This reduces thermal stress on the insert and the workpiece, leading to extended insert life and fewer interruptions for tool changes. In wet machining or operations that demand reliable heat management, the coolant pathway helps maintain cutting-edge geometry and reduces the risk of built-up edge, delivering measurable gains in uptime and part quality. Secure assembly, intuitive service and wide insert compatibility Assembly and maintenance are straightforward: the cutter uses an M12 thread and is retained with a Torx screw (M4x8.5) using a T15 driver for quick indexable insert changes. It is designed for RPMT 1204 indexable inserts and is compatible with inserts from Korloy, ensuring a wide selection of grades for various materials and cutting conditions. With a clear fastening system and accessible screw size, the head offers quick interchangeability and predictable repeatability in tool setting. Compact dimensions for versatile workshop integration With a total length of 57 mm and a cutting height of 35 mm, the head fits tight set-ups while still providing effective cutting capacity; its low mass (approx. 0.141 kg) contributes to reduced centrifugal loads during high-speed rotation. The combination of compact form and coolant feed makes the tool suitable for confined tool magazines and multi-axis cells where space and thermal control are both at a premium. The unit is supplied as SKU VT294TM by Teknik Makina, and can be incorporated into tooling concepts that prioritise reliability and simple maintenance. For tailored application advice or to secure the Teknik Makina screw-in milling cutter VT294TM with internal coolant for a specific process, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VT294TM Manufacturer: Teknik Makina Product: Screw-in milling cutter for RPMT 1204 indexable inserts Facts Diameter: 25 mm Total length: 57 mm Cutting height: 35 mm Thread height: 22 mm Thread: M12 Weight: 0.141 kg Cutting edges: 2 Torx key: T15 Torx screw: M4x8.5 Special features Internal coolant Compatible with RPMT 1204 inserts Compatible insert manufacturer: Korloy Brand: Teknik Makina FAQ Which inserts are compatible with this cutter? The cutter accepts RPMT 1204 indexable inserts; it is supplied compatible with insert grades available from Korloy and suited for a range of finishing and roughing tasks. How does the internal coolant improve performance? Internal coolant in this cutter directs fluid to the cutting edge, helping to control temperature and evacuate chips, which extends insert life and improves surface quality. What fastening and service tools are required? Assembly and insert changes use a Torx T15 driver and the retaining screw M4x8.5, enabling quick and secure servicing of the screw-in head. Is the cutter suitable for compact machining centres? Yes — the compact overall length (57 mm) and modest mass (0.141 kg) make it suitable for confined tool magazines and multi-axis machines where space is limited. What is the SKU and who manufactures the tool? The tool is sold as VT294TM and manufactured by Teknik Makina; the SKU aids in ordering and spare-part identification. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for 3PKT 1004 Indexable Inserts L57mm with Internal Coolant, 3-Flute - Teknik Makina
The compact combination of a 25 mm diameter, internal coolant and compatibility with 3PKT 1004 indexable inserts ensures stable machining and reduced tool changes; order the screw-in cutter directly via Metav Werkzeuge or ask our consultants if needed. Screw-in cutter VT270TM – 25 mm with internal coolant (Teknik Makina) The screw-in cutter VT270TM is a compact milling head for 3PKT 1004 indexable inserts, designed for precise finishing and reliable coolant-through performance 25 mm diameter for compact milling Internal coolant for controlled cooling Compatible with Taegutec 3PKT 1004 inserts Three cutting edges for balanced cutting Consistent cutting performance in tight spaces The compact 25 mm diameter and a total length of 57 mm provide a space-saving solution that maintains dimensional accuracy in confined setups. With three cutting edges, the design delivers a balanced cut that reduces vibration and improves surface finish; this results in fewer reworks and more predictable cycle times. The lightweight construction (approx. 0.112 kg) reduces spindle load while preserving rigidity, which is beneficial for small machines and fixtures where stability directly affects throughput and part quality. Coolant-through system that extends tool life Integrated internal coolant channels feed lubricant directly to the cutting zone, lowering temperatures and improving chip evacuation. This cooling concept reduces thermal wear on the insert geometry and helps maintain a consistent cutting edge, which translates into longer intervals between indexings and lower consumable costs. For operations that prioritise reproducible results and lower overall tooling expenditure, the coolant-through configuration is a decisive technical advantage. Versatile compatibility and straightforward maintenance Designed for use with 3PKT 1004 indexable inserts (Taegutec-compatible), the tool head simplifies inventory management by supporting a commonly stocked insert family. The threaded connection (M12, thread height 35 mm) and the Torx clamping screw specification (Torx key T8, screw M2.5x7) enable quick insert changes and secure fixation. These features minimise downtime during tool changes and allow maintenance personnel to swap inserts with standard workshop tools, supporting efficient shift schedules and predictable production planning. Technical reliability and workshop integration The head is engineered for repeatable seating and alignment in standard screw-in holders, making it suitable for a broad range of milling tasks that require compact tooling with reliable coolant supply. The 22 mm effective cutting height provides sufficient engagement for finishing passes and light roughing, while the three-edge geometry balances feed rates and surface outcome. As part of a coherent tooling strategy, this milling head supports process stability and measurable productivity gains on small-to-medium batch runs. For precise compact milling with coolant-through benefits, contact Metav Werkzeuge to discuss the VT270TM from Teknik Makina and to arrange purchase or tailored technical advice by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: VT270TM Manufacturer: Teknik Makina Diameter: 25 mm Overall length: 57 mm Thread: M12 Thread height: 35 mm Cutting height: 22 mm Number of cutting edges: 3 Weight: 0.112 kg Internal coolant: yes Compatible inserts: 3PKT 1004 (Taegutec) Torx key: T8 Torx screw: M2.5x7 Product type: screw-in cutter FAQ What insert type fits this cutter? The cutter accepts 3PKT 1004 indexable inserts, compatible with Taegutec insert families for straightforward sourcing. Does the tool support coolant-through operation? Yes, the VT270TM features internal coolant channels to deliver coolant directly to the cutting zone. What is the thread connection for mounting the head? The head uses an M12 screw-in connection with a thread height of 35 mm for secure mounting. How many cutting edges does the head have and what are the benefits? The head is equipped with three cutting edges, which balance cutting forces, reduce vibration, and improve surface finish during finishing operations. Which fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M2.5x7 tightened with a T8 Torx key for reliable and repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for AP-- 1604 Indexable Inserts With Internal Coolant, 55mm Length - Teknik Makina
Take advantage of the combination of precise mounting, internal coolant and proven insert compatibility to streamline milling operations. Benefit from robust serviceability and consistent chip control for reduced downtime — order or request advice via Metav Werkzeuge for a reliable supply and fast technical guidance. Screw-in milling cutter VT160-1TM — 25 mm diameter, internal coolant, Teknik Makina The Screw-in milling cutter VT160-1TM is a compact, serviceable cutter designed for machining with AP--1604 indexable inserts in industrial and trade workshops. 25 mm cutting diameter Internal coolant for reliable chip removal Compatible with AP--1604 indexable inserts M12 screw-in thread for secure mounting Precision and predictable performance for indexable-insert milling The compact tool is engineered for stable, repeatable results when fitted with AP--1604 inserts. With a 25 mm diameter and two cutting edges, the design focuses on efficient metal removal with predictable cutting forces. The internal coolant channel ensures consistent coolant delivery to the cutting zone, improving tool life and helping to avoid built-up edge. This stability leads to fewer interruptions and a more economical machining cycle when compared with ad hoc tooling solutions. Robust mounting and easy insert servicing to reduce downtime A secure M12 screw-in connection and defined thread height support fast, vibration-resistant clamping on the toolholder. Replaceable components are accessed using the supplied Torx T15 key and M4x10 Torx screws for straightforward insert changes and maintenance. The combination of standardised fastenings and a compact head reduces changeover time, which benefits production runs where quick tool swaps preserve spindle utilisation and consistency. Compact dimensions that simplify setup and handling At an overall length of 55 mm and a cutting height of 33 mm, the tool offers a low-protrusion solution for confined setups and shoulder milling. The modest mass (approx. 0.107 kg) contributes to reduced centrifugal loads in high-speed applications and makes balancing easier on compact toolholders. These attributes translate into improved surface quality and less fixture rework, supporting a leaner workflow on the shopfloor. Compatibility and supply chain reliability for industrial users Designed to accept AP--1604 inserts from major suppliers such as Korloy, the cutter integrates into established tooling systems without the need for bespoke adapters. Supplied by Teknik Makina and distributed through Metav Werkzeuge, the product benefits from a European fulfilment network that prioritises consistent availability and a clear quality filter at the Emmerich location. The result is straightforward purchasing, dependable delivery and the assurance of compatible spare parts when required. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina screw-in milling cutter VT160-1TM into existing machining setups and to secure available stock; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: VT160-1TM Brand: Teknik Makina Label: 25mm Einschraubfräser AP-- 1604 L55mm mit Innenkühlung Facts Diameter: 25 mm Overall length: 55 mm Thread: M12 Thread height: 22 mm Cutting edges: 2 Cutting height: 33 mm Weight: 0.107 kg Special features Internal coolant: Yes Compatible inserts: AP--1604 Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this cutter? The cutter accepts AP--1604 indexable inserts; compatible inserts from Korloy are suitable for use with this Teknik Makina screw-in milling cutter (VT160-1TM). Is the tool supplied with a coolant channel? Yes — the tool features internal coolant, providing direct coolant delivery to the cutting edge to assist chip evacuation and tool life. What fastening is required for mounting? Mounting uses an M12 screw-in thread with a defined thread height; insert clamping employs an M4x10 Torx screw tightened with a T15 Torx key. How many cutting edges does the head provide? The head is configured with two cutting edges, offering a balance between material removal rate and surface finish for general milling tasks. What is the overall length and handling benefit? Overall length is 55 mm, which reduces tool projection and simplifies setups in constrained workspaces while aiding dynamic stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for APXT 1003 Indexable Inserts 3-Flute Internal Coolant, M12 Thread 55mm Overall Length - Teknik Makina
Take advantage of a compact, high-performance milling head that combines 25 mm cutting diameter with internal coolant and a secure M12 screw-in interface for reliable insert clamping; order the tool directly via Metav Werkzeuge or consult the team for application advice. Screw-in cutter for APXT 1003 indexable inserts — 25 mm, internal coolant (Teknik Makina) The Screw-in cutter for APXT 1003 indexable inserts is a compact milling head designed for insert-based roughing and finishing operations, offering internal coolant delivery and a robust M12 threaded connection for secure mounting in modular toolholders. 25 mm diameter for versatile milling Internal coolant for improved chip evacuation M12 screw-in thread with 22 mm engagement Compatible with APXT 1003 Korloy inserts Stable cutting with consistent accuracy The compact milling head delivers high stability through its 25 mm diameter and a solid screw-in interface. The combination of a M12 thread with 22 mm engagement ensures reliable seat and repeatable run-out values, which supports consistent part quality across batches. With three cutting edges and a total length of 55 mm, the tool balances rigidity and reach for many modular setups. These features reduce vibration and help to maintain tolerances in serial production, increasing overall process reliability. Improved tool life thanks to coolant and chip control Integrated internal coolant channels feed lubrication directly to the insert zone, lowering cutting temperatures and improving flank wear behaviour. Direct coolant supply also supports efficient chip evacuation, especially in interrupted cuts or when machining materials prone to built-up edge. The result is extended insert life and fewer tool changes, which contributes to lower downtime and a more economical process in mixed-production environments. Fast insert replacement and secure clamping The head is designed for quick serviceability: inserts are fixed with a Torx T8 clamping screw (M2.5×5.5), enabling precise, repeatable torque settings and a secure fit. Compatibility with APXT 1003 type indexable inserts from Korloy gives access to a broad range of grades for different materials and cutting conditions. The simple clamping system reduces handling time during maintenance and supports predictable tool-change routines on the shop floor. Suited for flexible workshops and industrial lines This screw-in milling head is suited to workshops and production lines that require a compact, modular solution for insert-based milling. Its balanced design and internal coolant capability make it a pragmatic choice for operations requiring both roughing capacity and the option for higher-quality finishes. Lightweight at 0.135 kg, the head integrates easily into automated tool changers and small machining centres, helping to streamline tooling inventories while preserving machining performance. Contact Metav Werkzeuge for tailored recommendations on Teknik Makina screw-in cutters with internal coolant and ensure the right combination of inserts and toolholders for the application Technical Data Article number: VT140-1TM Label: 25mm Einschraubfräser APXT 1003 L55mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 25 mm Total length: 55 mm Weight: 0.135 kg Thread: M12 Thread engagement height: 22 mm Number of cutting edges: 3 Cutting-edge height: 33 mm SKU: VT140-1TM eCl@ss: 21180806 Special features Internal coolant Compatible with APXT 1003 indexable inserts Torx key: T8 Torx screw: M2.5×5.5 Label indicates Korloy compatibility FAQ What insert type is required for this milling head? The head accepts APXT 1003 indexable inserts; compatibility is stated for Korloy grades suitable for the intended cut. Is the coolant internal or external on this tool? The milling head features internal coolant that supplies lubricant directly to the cutting zone. What thread is used to mount the cutter? The tool uses an M12 screw-in thread with 22 mm engagement for secure mounting. How many cutting edges does the head have and what is their height? The head is equipped with three cutting edges and a cutting-edge height of 33 mm. Which torx key and screw type are used for insert clamping? Insert clamping is by Torx T8 using an M2.5×5.5 screw. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for BLMP 0603 Indexable Inserts L57mm With Internal Cooling, M12 Thread - Teknik Makina
Take advantage of the combination of a compact 25 mm diameter, secure M12 screw‑in mounting and coolant‑through capability for uninterrupted machining. The result is dependable indexable‑insert milling with reduced changeover time — order via Metav Werkzeuge or request technical advice from the consultants. VT192-1TM 25 mm screw-in cutter for BLMP 0603 with internal coolant – Teknik Makina A screw-in cutter designed for BLMP 0603 indexable inserts, offering compact head dimensions and coolant‑through performance for efficient milling in confined set-ups 25 mm diameter for compact milling heads Internal coolant channel for improved chip evacuation M12 screw-in thread, 22 mm thread height Compatible with BLMP 0603 inserts (Taegutec) Precision and compatibility for consistent production The VT192-1TM is built around a compact 25 mm diameter to keep overhang low and rigidity high, a decisive factor in reducing vibration and improving surface finish. With four cutting edges configured for indexable inserts, the tool enables economical insert rotation and rapid re‑establishment of cutting parameters after a wear change. Compatibility with BLMP 0603 indexable inserts — including Taegutec grades — provides flexibility in selecting carbide grades for specific materials and cutting conditions, making the head suitable for job shops and production environments that demand repeatable results and predictable tool life. Cooler chips and longer insert life from coolant‑through design A coolant‑through arrangement provides targeted cooling at the cutting zone and supports active chip evacuation, which lowers cutting temperatures and minimises built‑up edge formation. The internal coolant channel not only extends insert life but also reduces the frequency of regrinds and replacements, contributing to lower total machining costs and higher uptime. For applications where thermal control and swarf management are critical, the coolant‑through option improves process stability and helps maintain tight dimensional tolerances over longer cycles. Secure mounting and workshop efficiency for fast tool changes Designed for simple, repeatable mounting, the head uses an M12 thread with a 22 mm seating height for reliable screw‑in retention and precise concentricity. Fast reassembly is supported by the Torx screw specification (Torx T8 with screw M3x6.2), ensuring quick insert clamping and minimal downtime. At just 0.119 kg, the assembly keeps spindle load light while remaining robust enough for standard milling operations. This combination of secure mounting, lightweight construction and CNC‑ready compatibility makes the head a practical choice for manufacturers seeking fast tool swaps and consistent production throughput. For specification support or to source Teknik Makina’s VT192-1TM screw-in cutter, contact Metav Werkzeuge in Emmerich for expert guidance and prompt delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: VT192-1TM Manufacturer: Teknik Makina Product type: screw-in cutter Model / inserts: for BLMP 0603 indexable inserts SKU: VT192-1TM Specifications Diameter: 25 mm Overall length: 57 mm Thread height: 22 mm Thread: M12 Number of cutting edges: 4 Cutting height: 35 mm Weight: 0.119 kg Materials & Features Internal coolant: yes Compatible inserts: BLMP 0603 (Taegutec) Torx screw: M3x6.2 Torx key: T8 Intended use: indexable-insert milling FAQ What inserts are compatible with this screw-in cutter? The cutter accepts BLMP 0603 indexable inserts; Taegutec grades are compatible and commonly used with VT192-1TM to suit different materials and machining tasks. Does the tool support coolant-through machining? Yes, internal coolant is provided to deliver coolant directly to the cutting zone, improving chip evacuation and helping to prolong insert life. How is the tool mounted and secured? Mounting is via an M12 screw‑in thread with a 22 mm thread height; insert clamping uses a Torx screw (T8) sized M3x6.2 for secure, repeatable assembly. Which workshop environments benefit most from this head? The compact diameter, four cutting edges and coolant‑through capability make the head suitable for job shops and production lines requiring low overhang, quick insert changes and stable cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for BLMP 0603 Indexable Inserts, M12 Thread, 2 Teeth, 100° Cutting Angle - Teknik Makina
Take advantage of precise screw-in mounting, compact dimensions and straightforward insert compatibility to keep machining cycles consistent and maintenance quick; order the cutter directly via Metav Werkzeuge or consult our specialists for application guidance. Screw-in Milling Cutter VT192TM — for BLMP 0603 indexable inserts, M12 thread A compact screw-in milling cutter Screw-in Milling Cutter VT192TM designed for secure mounting with BLMP 0603 indexable inserts and routine CNC milling applications. M12 threaded shank, quick mounting 25 mm cutting diameter for versatile use Two cutting edges for efficient material removal Compatible with BLMP 0603 indexable inserts Reduced downtime through fast, reliable mounting The screw-in design with an M12 thread and a dedicated M3x6.5 screw secured with a T8 Torx key delivers a consistently rigid connection that shortens tool-change intervals. By combining a compact threaded arbor with a standardised fixing method, the system reduces clamping variability and therefore minimizes setup time. This mechanical stability translates into fewer interruptions on the production floor and a predictable machining rhythm — a clear advantage for shops focused on throughput and repeatability. Consistent cutting performance with balanced geometry Equipped for BLMP 0603 indexable inserts from Taegutec, the cutter benefits from a 100° cutting angle and two cutting edges that produce balanced radial forces and stable chip formation. The geometry supports steady cutting action and helps to prevent chatter during interrupted cuts. For operations requiring repeatable slotting or light face-milling, this combination provides a reliable, economical option that converts insert life into predictable productivity gains. Compact dimensions for tight setups and accurate placement The tool’s modest footprint — 25 mm diameter, 57 mm overall length and 25 mm cutting height — enables use in restricted tool pockets and close-quarter fixtures without compromising stiffness. The 22 mm thread height ensures sufficient engagement in the holder while the low mass (0.044 kg) reduces centrifugal loads at moderate spindle speeds. These measurable characteristics make the cutter suitable where tool clearance and positional accuracy are priorities, helping to maintain part tolerances across series runs. Low-maintenance routine and seamless integration into workflows As a purpose-built screw-in cutter from Teknik Makina, the VT192TM simplifies insert changes and routine checks: the standard Torx fixing avoids special tools, and the indexable design means quicker refresh cycles compared with brazed or solid tips. The tool integrates directly with established insert formats, helping workshops maintain consistent tool lists and reducing inventory complexity. The straightforward mechanical design supports predictable service intervals and keeps maintenance tasks brief and unambiguous. Contact Metav Werkzeuge for tailored application advice and rapid supply of Teknik Makina screw-in cutters from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT192TM Manufacturer: Teknik Makina Diameter: 25 mm Overall length: 57 mm Cutting height: 25 mm Thread height: 22 mm Weight: 0.044 kg Cutting angle: 100° Number of cutting edges: 2 Thread: M12 Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Fixing screw: M3x6.5 Torx key size: T8 FAQ What insert type fits this cutter? The screw-in milling cutter VT192TM is designed for BLMP 0603 indexable inserts and is compatible with inserts from Taegutec. Which thread and fixing are used for mounting? Mounting is via an M12 thread; the insert clamping is secured with an M3x6.5 Torx screw (T8) as specified for the VT192TM. How many cutting edges does the tool provide and why does that matter? The cutter has two cutting edges, which gives balanced cutting forces and efficient chip removal for stable machining and predictable insert wear. Is the tool suitable for compact toolholders and tight setups? Yes — the 25 mm diameter and 57 mm overall length make the VT192TM appropriate for constrained fixturing while maintaining stiffness. What measurable dimensions are important for setup checks? Key values to confirm are 25 mm diameter, 25 mm cutting height, 22 mm thread height and overall length 57 mm for accurate tool offsets and holder compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for BLMP 0904 Indexable Inserts L55mm, 3 Flutes - Teknik Makina
Take advantage of the combination of precise insert compatibility, compact dimensions and secure Torx fastening for uninterrupted milling cycles; order the cutter through Metav Werkzeuge or consult our experts for application-specific recommendations. 25 mm screw-in milling cutter VT265TM — compatible with BLMP 0904 indexable inserts, 3 cutting edges | Teknik Makina The 25 mm screw-in milling cutter for BLMP 0904 indexable inserts offers a compact, insert-based solution for face and shoulder milling operations in CNC machining, designed for reliable repeatability in production settings. 25 mm diameter for tight pockets Three cutting edges for smooth chip control Compatible with Taegutec BLMP 0904 inserts Secure Torx fixing with T10 and M3.5x8.5 screw High productivity through precise insert integration The cutter head is engineered to combine indexable insert technology with a compact mounting form, supporting stable cutting performance in serial machining. With a 25 mm diameter and three cutting edges, the tool balances material removal rate and surface quality, enabling shorter cycle times without sacrificing finish. The insert interface is specified for BLMP 0904 inserts, which simplifies inventory and reduces changeover time when paired with compatible brands such as Taegutec. The result is a dependable solution for repetitive milling tasks where process stability matters. Fast, secure clamping for minimal downtime The design features a screw-in mounting system with a defined thread height of 20 mm and a robust fixing method that uses a T10 Torx key and M3.5x8.5 Torx screw to hold the insert securely. This arrangement ensures consistent seating and repeatable geometry after each change, lowering the risk of misalignment and rework. The compact 55 mm overall length reduces overhang, improving rigidity, while the precise fastening arrangement permits quick insert replacement and controlled torque application during maintenance. Compact dimensions that support flexible toolpaths A short tool projection and modest weight (approx. 0.114 kg) contribute to reduced vibration and improved run-out characteristics on high-speed mills. The cutter’s geometry with a 35 mm cutting height delivers enough engagement for light to moderate-DOC (depth of cut) passes while keeping cutter mass low. In practice, this enables tighter tool spacing in multi-tool setups and better accessibility in confined workpiece features, benefiting workshops aiming to increase machine utilisation and throughput. Procurement confidence and workshop support Sourcing this screw-in cutter through an experienced distributor adds tangible benefits: inventory alignment with insert families, documented technical data and straightforward logistics. The modular nature of the insert system reduces tooling complexity and supports predictable reconditioning cycles. Metav’s role as a precision partner means orders are supported from stock in Emmerich, backed by a broad product range and customer-proven reliability, which helps maintain production continuity and supplier consolidation. For procurement enquiries or detailed application advice on the Teknik Makina VT265TM screw-in milling cutter, contact Metav Werkzeuge for tailored recommendations and fast delivery from Emmerich. Technical data SKU: VT265TM Manufacturer: Teknik Makina Product label: 25mm screw-in milling cutter BLMP 0904 L55mm Product type: screw-in milling cutter Core specifications Diameter: 25 mm Overall length: 55 mm Cutting height: 35 mm Thread height: 20 mm Thread: 12 Cutting edges: 3 Weight: 0.114 kg Torx key: T10 Torx screw: M3.5x8.5 Compatibility & special features For BLMP 0904 indexable inserts Compatible with Taegutec inserts Insert fastening with Torx screw Screw-in mounting FAQ What inserts does this cutter accept? The cutter accepts BLMP 0904 indexable inserts; it is supplied to fit that insert family and is compatible with inserts from Taegutec. Which tool is used to tighten the insert screw? Insert fastening requires a T10 Torx key and the specified M3.5x8.5 Torx screw for secure clamping. What are the key dimensions to check for machine setup? Key dimensions include the 25 mm diameter, 55 mm overall length and 20 mm thread height, which are relevant for toolholder clearance and programme offsets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for EPMT 0603 Indexable Inserts 4 Cutting Edges M12 Thread, 55mm Overall Length - Teknik Makina
Benefit from a robust M12 screw-in connection, a precise 93° cutting angle and compatibility with EPMT 0603 indexable inserts for stable, repeatable milling. Take advantage of secure Torx clamping and compact dimensions to streamline tool changes; order the cutter directly via Metav Werkzeuge or consult their specialists for technical advice. Screw-in cutter VT232TM – M12 thread, Ø25 mm (Teknik Makina) A Screw-in cutter VT232TM engineered for industrial milling with EPMT 0603 indexable inserts, offering secure screw-in mounting and consistent chip control in production environments M12 threaded connection for secure clamping Compatible with EPMT 0603 indexable inserts Four cutting edges for balanced material removal Torx M2.5x5.5 clamping screw with T7 key Secure mounting reduces setup time and runout risk The screw-in design with a M12 threaded connection provides a compact, repeatable interface that lowers setup time and minimises radial runout. Combined with the Torx M2.5x5.5 clamping screw and the T7 drive, the clamping system secures the insert reliably, which reduces vibration and helps maintain dimensional consistency across batches. For workshops that prioritise dependable tool seating and quick indexability, this arrangement supports uninterrupted production and predictable cycle times. Stable cutting geometry for uniform chip formation With a cutting diameter of Ø25 mm, a 93° cutting angle and 4 cutting edges, this tool delivers balanced axial and radial engagement. The cutter’s cutting height 20 mm and overall length 55 mm are optimised for short overhangs and improved stiffness; the thread length 35 mm ensures secure fixation in the holder. The model VT232TM is therefore suited to operations where repeatable chip control and moderate material removal are required, translating technical geometry into longer insert life and fewer re‑settings on the shop floor. Practical compatibility and workshop handling Designed for use with EPMT 0603 indexable inserts and compatible with Hitachi insert geometries, the screw-in cutter simplifies inventory management by pairing with widely used insert types. At just 0.11 kg, the tool is easy to handle during tool changes and packing. The combination of standardised fixing, common insert sizing and a compact form factor makes the cutter a practical choice for maintenance-focused production lines and specialist job shops that require quick interchangeability without compromising stability. Choose the Teknik Cutting Tools screw-in cutter VT232TM for secure, repeatable milling; contact Metav Werkzeuge in Emmerich for procurement guidance and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT232TM Manufacturer: Teknik Makina Product: Screw-in cutter for indexable inserts Compatible inserts: EPMT 0603 (for EPMT 0603 Indexable Inserts) Compatible insert manufacturer: Hitachi ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 25 mm Thread: M12 Overall length: 55 mm Thread length / height: 35 mm Cutting height: 20 mm Cutting edges: 4 Cutting angle: 93° Weight: 0.11 kg Torx screw: M2,5x5,5 Torx key: T7 Special features Screw-in cutter design For EPMT 0603 indexable inserts Compatible with Hitachi inserts Compact, short-overhang geometry FAQ Which inserts fit this cutter? The VT232TM is intended for EPMT 0603 indexable inserts; it is also compatible with matching Hitachi insert variants specified for EPMT 0603. What is the required clamping screw and key? Clamping is secured with a M2.5x5.5 Torx screw and the appropriate drive is T7, ensuring repeatable torque and secure seating. What are the main dimensions to check for holder compatibility? Key dimensions are Ø25 mm diameter, M12 thread and an overall length of 55 mm; these determine holder fit and permissible overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for EPMT 0603 Indexable Inserts L55mm Internal Coolant - Teknik Makina
Benefit from the combination of a compact screw-in design, internal coolant and proven indexable insert compatibility to maintain stable cycle times and reduce tool changes. Order supply and technical advice for the Teknik Makina VT232-1TM via Metav Werkzeuge or consult our specialists for application support. Screw-in cutter VT232-1TM – 25 mm, internal coolant (for EPMT 0603 indexable inserts) by Teknik Makina Screw-in cutter VT232-1TM is a coolant-fed milling head engineered for use with EPMT 0603 indexable inserts, offering a compact solution for precision milling operations. 25 mm cutting diameter Internal coolant supply M12 screw-in thread 4 cutting edges, 20 mm insert height Faster, more consistent material removal with a compact head The combination of a 25 mm diameter and 4 cutting edges delivers an efficient balance of metal removal rate and surface quality. Multiple cutting edges distribute the cutting forces, which reduces vibration and makes the machining process more predictable; this stability is reflected in shorter cycle times and fewer reworks. The head geometry and insert seating are designed for secure clamping, so indexable inserts remain stable during interrupted cuts and higher feed rates. Measurable performance gains can be achieved simply by matching the correct insert grade and cutting data. Straightforward fitment and proven insert compatibility Installation is simplified by the M12 thread and the compact dimensions of the head, while retention is via a standard Torx T8 key and M2.5×5.5 screw, allowing quick insert changes and tight clamping. The head accepts EPMT 0603 indexable inserts and is compatible with Hitachi insert variants, so existing tool inventories can be leveraged. Indexable inserts permit rapid replacement without regrinding; this modular approach means downtime is reduced because the cutting edge, not the whole tool, is replaced. Controlled cooling for longer tool life and consistent cuts An integrated internal coolant channel directs lubricant precisely to the cutting zone, improving chip evacuation and reducing thermal load on the insert. This targeted cooling helps to slow flank wear and maintain cutting-edge geometry for longer, which in turn supports extended tool life and more consistent dimensional results across batches. The internal coolant also lowers the risk of built-up edge formation and makes high-feed or semi-finishing operations more reliable. Compact, workshop-friendly design that integrates easily With a 55 mm overall length, a thread height of 35 mm and a mass of 0.11 kg, the head is engineered for compact tool magazines and reduced spindle overhang. The 20 mm insert height offers substantial cutting engagement while keeping the assembly balanced, helping to protect spindle bearings and minimise run-out-related errors. The small footprint and standard screw-in interface make the cutter suitable for both series production and smaller workshop environments where space and quick changeovers matter. For coolant-fed performance and reliable insert handling, contact Metav Werkzeuge to discuss supply and application advice for the Teknik Makina VT232-1TM screw-in cutter and to arrange prompt delivery from Emmerich. Technical data SKU: VT232-1TM UID: VT232-1TM Manufacturer: Teknik Makina Product type: Screw-in cutter Description: 25 mm screw-in cutter for EPMT 0603 indexable inserts with internal coolant Label: 25mm Einschraubfräser EPMT 0603 L55mm mit Innenkühlung Core data Diameter: 25 mm Overall length: 55 mm Thread height: 35 mm Thread: M12 Weight: 0.11 kg Cutting edges: 4 Insert height: 20 mm ECLASS: 21180806 Special features Internal coolant For insert type: EPMT 0603 Compatible insert manufacturer: Hitachi Torx key: T8 Torx screw: M2.5×5.5 FAQ Which inserts fit this screw-in cutter? The VT232-1TM accepts EPMT 0603 indexable inserts and is specified to be compatible with Hitachi insert variants for straightforward replacement. How is the cutter secured to the spindle or holder? The head uses an M12 screw-in thread for installation and a Torx T8 screw (M2.5×5.5) for insert clamping on the VT232-1TM. Does the cutter provide coolant directly to the cutting zone? Yes, the VT232-1TM features internal coolant routing to the cutting edge to improve chip evacuation and thermal control. Can the head be used for high-feed finishing operations? With 4 cutting edges and a robust insert seat, the head is designed to handle elevated feeds when the correct insert grade and cutting data are selected for the task. What maintenance is required for the screw-in cutter? Routine checks of the clamping screw torque and inspection of insert seats are recommended; replacing worn inserts on the VT232-1TM preserves cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Screw-In Cutter for LNMU 0303 Indexable Inserts With Internal Coolant, 57mm Overall Length - Teknik Makina
Benefit from efficient material removal with internal coolant and a secure M12 screw-in connection for steady production performance; the compact design and compatibility with LNMU 0303 indexable inserts reduce tooling changes and downtime — order the cutter directly via Metav Werkzeuge or ask our consultants for tailored advice. 25 mm screw-in milling cutter VT304-1TM — for LNMU 0303 indexable inserts with internal coolant (Teknik Makina) The 25 mm screw-in milling cutter VT304-1TM is engineered for high-efficiency milling with LNMU 0303 indexable inserts, offering a compact, coolant-fed solution for general and semi‑finishing operations. 25 mm diameter with internal coolant Compatible with LNMU 0303 indexable inserts M12 screw-in connection, 22 mm thread height Four cutting edges, 57 mm overall length Enhanced metal removal and consistent cycle times The compact head with a 25 mm diameter and four cutting edges is designed to deliver a secure balance between material removal rate and surface quality. Internal coolant channels feed cutting edges directly, substantially reducing heat at the cutting zone and extending insert life. The screw-in design with an M12 interface and 22 mm thread height provides rigid mounting, which lowers vibration and improves dimensional stability during high-feed passes. These technical attributes translate into measurable production benefits: fewer tool changes, longer insert life and more predictable cycle times. Proven compatibility for flexible tooling strategies Compatibility with LNMU 0303 indexable inserts from Tungaloy simplifies stocking and replacement procedures. The cutter accepts standard indexable inserts, secured with an M2.5x7 Torx screw operated by a Torx T8 key, enabling rapid insert changes and minimal setup time. Internal coolant support complements coated insert grades by preserving cutting-edge microgeometry under thermal load. This modular approach allows a single holder to serve multiple work steps, reducing inventory complexity while maintaining process reliability. Compact design that supports workshop efficiency With an overall length of 57 mm and a lightweight construction of 0.108 kg, the tool is easy to handle and well suited for compact toolholders where space is limited. The screw-in connection simplifies installation and removal, aiding quick reconfiguration of tool magazines. The cutter’s geometry and coolant feed are engineered to support both roughing and finishing strategies, offering a versatile option for mixed-production environments. Clear technical attributes allow straightforward integration into CAM setups and predictable tooling lists for procurement. For supply, technical details or ordering through Metav Werkzeuge — trusted in precision and delivery from Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VT304-1TM screw-in milling cutter and compatible insert options Technical Data Article number: VT304-1TM Manufacturer: Teknik Makina Product type: screw-in milling cutter Designation: 25mm screw-in cutter for LNMU 0303 indexable inserts Facts Diameter: 25 mm Overall length: 57 mm Weight: 0.108 kg Thread height: 22 mm Number of cutting edges: 4 Cutting-edge height: 35 mm Special features Internal coolant Compatible inserts: LNMU 0303 Compatible insert manufacturer: Tungaloy Thread: M12 Torx key: T8 Torx screw: M2.5x7 FAQ Which insert type is required for this cutter? The cutter uses LNMU 0303 indexable inserts; Tungaloy-specified grades are directly compatible with the VT304-1TM screw-in milling cutter. Is internal coolant supplied through the tool? Yes, the VT304-1TM is equipped with internal coolant channels to feed coolant directly to the cutting edges and improve tool life. What is the mounting interface for the cutter? Mounting is via an M12 screw-in connection with a thread height of 22 mm, providing rigid clamping in the toolholder. How many cutting edges are available and what is the overall length? The cutter has four cutting edges and an overall length of 57 mm, offering a compact but robust option for mixed milling tasks. Which Torx key and screw are used to secure the inserts? Inserts are fastened with an M2.5x7 Torx screw tightened using a Torx T8 key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Maximise reach and flexibility with screw-in cutters
Screw-in cutters, also known as modular screw-in milling heads or threaded cutter heads, are modular milling tools with a threaded rear that are screwed into extensions or basic toolholders. They allow the tool overhang to be adapted precisely to the depth of the machining area, providing the reach and adaptability required for complex tool and mould work.
Why these modular heads are essential in deep machining
Screw-in cutters are designed so that only the front milling head needs replacing when worn, while the carrier assemblies and extensions remain in service — a setup that reduces tooling costs and simplifies logistics in production environments. Versions without internal coolant rely on external nozzles to feed coolant to the cutting zone, which is adequate for shallow, easily accessible operations but becomes ineffective for deep contours. For deep internal work the industrial standard is screw-in cutters with internal coolant: inner channels run through the connection thread right to the cutting edges, ensuring centred coolant delivery, reliable chip transport and effective heat control.
- the internal coolant supply generates the high flushing pressure necessary to evacuate chips against gravity from narrow cavities
- thermal load on the concealed cutting zone is reduced, lowering the risk of thermal damage and deformation
- improved chip evacuation prevents spalling and vibration, dramatically reducing the likelihood of tool breakage during extended overhangs
Practical benefits that improve throughput and cost-efficiency
- replaceable milling heads cut tooling expenditure and inventory complexity
- modular carrier systems and extensions reduce retooling and shorten changeover times
- reliable chip evacuation and cooling increase tool life and process stability
- consistent performance for deep cavities minimises scrap and rework
Metav as your precision partner for modular tooling
As a specialist partner, Metav brings decades of expertise and a broad offering that suits industry and workshops alike. With over 48,000 customers and a catalogue spanning more than 250,000 products, Metav combines a pragmatic supply chain from Emmerich with technical competence that helps engineers specify the right screw-in cutters and supporting extensions. If you need advice on selecting a modular screw-in milling head or determining the correct internal coolant routing for a cavity, our technical team can advise on specifications and compatibility.
In short: screw-in cutters provide modular reach, cost-effective head replacement and indispensable internal coolant performance for deep, confined machining.
FAQ
What is the difference between screw-in cutters with internal coolant and those without?
Screw-in cutters with internal coolant feature internal channels that feed coolant directly to the cutting edges via the connection thread, providing the flushing pressure required to evacuate chips from deep cavities; cutters without internal coolant rely on external nozzles and are suitable only for shallow, easily accessible operations.
How do modular screw-in milling heads reduce tooling costs?
Because the design allows only the worn front milling head to be replaced while the carrier and extensions remain in use, modular screw-in milling heads lower component consumption and simplify inventory management, leading to clear cost savings over time.
Which machining scenarios require threaded cutter heads with internal coolant?
Threaded cutter heads with internal coolant are essential when machining deep bores, cavities or internal contours where chips must be transported out against gravity and where external coolant cannot reach the cutting zone reliably.
Can long extensions be used with screw-in cutters without compromising chip evacuation?
Long extensions are feasible, but reliable chip evacuation under long overhangs depends on internal coolant delivery; without it, external coolant will often be blocked by deep part walls and chip clogging becomes a significant risk.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com