Modular screw-in cutters for adaptable deep machining
Screw-in cutters are modular milling tools designed to be screwed into extensions or toolholders to adjust overhang for deep or recessed machining and to make tool systems more economical by allowing only the front milling head to be replaced; they are indispensable in tool and mould making for such reasons. Where machining requires coolant delivered through the tool, internal cooling provides continuous, directed supply through channels to the cutting edges, whereas designs without internal cooling rely on external nozzles and suit only very shallow, easily accessible operations. For deep cavities and long extensions, the combination of long extensions and internal coolant ensures high flush pressure to evacuate chips against gravity, reduce thermal load and prevent chip clogging and vibration. Key advantages include improved tool longevity, higher process reliability and easier tool maintenance, with the primary use being precision metalworking and cavity finishing.
32mm Screw-In Face Mill For XNEX 0403 Indexable Inserts, 5 Cutting Edges, M16 Thread, 40mm Cutting Height - Teknik Makina
Benefit from secure M16 clamping, compatibility with XNEX 0403 indexable inserts and five cutting edges for efficient material removal—ensuring consistent cycle times and simple insert changes; order directly via Metav Werkzeuge or consult our specialists for process integration. Screw-in milling cutter VT249TM — 32 mm diameter, M16 thread by Teknik Makina The screw-in milling cutter provides a compact, robust mounting solution for indexable inserts and is designed for versatile face and shoulder milling applications with reliable repeatability 32 mm diameter for stable cutting M16 threaded shank for secure clamping Compatible with XNEX 0403 indexable inserts Five cutting edges for efficient material removal Improved rigidity and predictable performance on the shop floor The compact design delivers rigidity where it matters: a 32 mm diameter body and an M16 thread create a stable connection that reduces vibration and improves tool life. This stability translates into repeatable machining results and fewer reworks. By combining a short, stiff toolholder with a 65 mm total length and a modest weight of 0.253 kg, the assembly keeps spindle loads predictable, which helps to maintain constant surface finish and dimensional accuracy across batches. Flexible insert system that simplifies tool management Compatibility with XNEX 0403 indexable inserts and recognised manufacturers such as SECO allows rapid adaptation between finishing and roughing operations. The cutter accepts the insert geometry designed for radial and axial engagement, enabling quick insert indexing without special adapters. The five cutting edges maximise the number of effective edges per indexable plate, reducing tooling costs per component and lowering machine downtime during insert changes. The included Torx fastener specification (M2.5x5.5, key T7) standardises clamping and simplifies inventory. Practical handling that speeds set-up and maintenance A defined thread height of 25 mm and cutting height of 40 mm mean the tool seats securely with consistent overhang, aiding process planners in calculating stable cutting parameters. The simple screw-in interface shortens tool changes and reduces the need for complex balancing procedures. Maintenance routines are straightforward: visual check of insert seats, torque of the Torx M2.5x5.5 screw and replacement of worn inserts restore original cutting performance quickly. These features support efficient shop workflows and reduce non-productive time. For tailored advice on integrating the VT249TM into existing tool systems or to order through Metav Werkzeuge, contact our Emmerich-based team at +49 2822 7131930 or info@metav-werkzeuge.com for fast, expert support and reliable supply from our European stock. Technical data SKU: VT249TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Facts Diameter: 32 mm Thread: M16 Cutting edges: 5 Total length: 65 mm Cutting height: 40 mm Thread height: 25 mm Weight: 0.253 kg Special features Compatible inserts: XNEX 0403 Compatible with SECO inserts Torx screw: M2.5x5.5 Torx key size: T7 FAQ What insert type does this cutter accept? The screw-in milling cutter VT249TM accepts XNEX 0403 indexable inserts; the system is compatible with inserts from manufacturers such as SECO and uses the standard pocket geometry for reliable seating. Which shank and thread are used for mounting? Mounting is via an M16 threaded shank; the defined thread height of 25 mm ensures secure clamping and consistent positioning in the toolholder. How many cutting edges are available per cutter? The VT249TM is specified with five cutting edges, which increases the effective number of index positions and reduces tooling cost per produced part. What are the relevant dimensions for process planning? Key dimensions are 32 mm diameter, 65 mm total length and 40 mm cutting height; these values help determine overhang, rigidity and suitable spindle settings. Which fastener and key are required for insert clamping? Insert clamping uses a Torx M2.5x5.5 screw tightened with a T7 key for secure and repeatable fixing of the inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Screw-in Milling Cutter for BLMP 0904 Indexable Inserts, 65mm Overall Length - Teknik Makina
Take advantage of a compact, high‑performance screw‑in milling cutter engineered for efficient face milling: its 32 mm diameter and four cutting edges deliver consistent metal removal while the screw‑in design accepts BLMP 0904 indexable inserts for fast tool changes. Order this tool via Metav Werkzeuge or consult our specialists for integration advice. Screw‑in milling cutter for BLMP 0904 indexable inserts by Teknik Makina — 32 mm, L65 mm Screw‑in milling cutter for light to medium face milling applications in CNC and conventional machining, designed for use with BLMP 0904 indexable inserts. Screw‑in cutter for BLMP 0904 indexable inserts 32 mm diameter for compact milling operations Four cutting edges for high material removal rates Compatible with Taegutec inserts and T10 Torx screw Consistent milling output with compact cutter geometry The 32 mm tool body combines a short overall length with a rigid construction to keep runout and vibration low during milling. With four cutting edges, the cutter spreads cutting forces evenly across the tool, which reduces tool‑holder stress and improves surface finish. The screw‑in mounting provides a secure connection to the spindle or arbor and supports steady chip evacuation. These characteristics make the tool suitable for series work where reproducible quality and short cycle times are priorities. Rapid insert changes and secure clamping reduce downtime Designed for BLMP 0904 indexable inserts, the cutter accepts widely available insert grades and geometries from Taegutec, enabling quick adaptation to different materials or surface requirements. The insert is secured with a Torx screw (key T10, screw M3.5x8.5), which ensures a compact and reliable clamping method; this simplifies maintenance and minimises changeover time. The result is higher net machining time and lower process variability in batch production. Engineered for versatile mounting and predictable handling With an overall length of 65 mm and a mounting thread height of 25 mm, the tool balances accessibility and rigidity for use on smaller mills and multi‑axis machines alike. The moderate mass (approx. 0.248 kg) makes handling easier in tool preparation while still providing enough inertia to stabilise cutting forces. The screw‑in concept allows straightforward replacement of worn cutter bodies without altering insert stock, which streamlines inventory and reduces capital tied up in tooling. Contact Metav Werkzeuge for tailored advice on Teknik Makina screw‑in milling cutters and to discuss application compatibility for the VT266TM SKU Technical data SKU: VT266TM Product type: Screw‑in milling cutter Label: 32mm Einschraubfräser BLMP 0904 L65mm Brand: Teknik Makina Compatible indexable inserts: BLMP 0904 (Taegutec) Facts Diameter: 32 mm Overall length: 65 mm Thread height: 25 mm Thread size: 16 Cutting edges: 4 Cutting edge height: 40 mm Weight: 0.248 kg Torx key: T10 Torx screw: M3.5x8.5 ECLASS: 21180806 Special features Screw‑in mounting for secure fit Compatible with Taegutec inserts Indexable inserts for fast replacement Compact design for small‑machine use Suitable for face milling and light shoulder milling FAQ What insert type does the cutter use? The cutter accepts BLMP 0904 indexable inserts; the body is configured for the standard BLMP 0904 pocket for reliable seating. Is the tool compatible with Taegutec inserts? Yes, the tool is specified as compatible with Taegutec inserts and supports standard geometries for that insert family. Which screw and key are required to secure the insert? The insert is clamped with a Torx screw M3.5x8.5, tightened using a T10 Torx key. What is the SKU for ordering and reference? The product is listed under SKU VT266TM for ordering and stock management. Can this cutter be used on small CNC machines? The compact 65 mm overall length and moderate weight (0.248 kg) make the cutter suitable for small to medium CNC machines where space and rigidity must be balanced. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Screw-In Milling Cutter for EPMT 0603 Indexable Inserts, 5 Teeth, 25.3mm Cutting Height, M16 Thread - Teknik Makina
Benefit from precise, stable milling with the M16 screw-in interface and five cutting edges that deliver consistent material removal and reduced machining chatter; take advantage of the compact Ø 32 mm head for flexible tool setup — order directly via Metav Werkzeuge or consult our advisors for application support. Screw-in milling cutter VT233TM – M16 threaded cutter, Ø 32 mm, for EPMT 0603 indexable inserts by Teknik Makina Screw-in milling cutter VT233TM designed for secure insert clamping and versatile finishing tasks in workshop and production environments using EPMT 0603 indexable inserts Screw-in design with M16 thread Ø 32 mm cutting diameter Five cutting edges for stable machining Compatible with EPMT 0603 indexable inserts Predictable chip control and reliable surface finish The compact head geometry provides a predictable cutting behaviour that supports consistent results when machining repeat batches. With a 93° cutting angle and five cutting edges, the tool promotes even loading of the insert corners and helps to avoid premature wear on individual cutting corners. This leads to improved dimensional repeatability and a cleaner surface finish, especially beneficial where component tolerance and appearance matter. The described behaviour reduces rework and contributes to steady production throughput. Quick, secure mounting that reduces downtime Threaded mounting via the M16 thread and the dedicated Torx screw arrangement enables fast, repeatable tool changes. The supplied screw specification M2.5 x 5.5 together with a T7 Torx interface ensures secure clamping of the insert seat and straightforward maintenance procedures. A compact overall length of 60 mm and a modest weight of 0.197 kg make handling and setup easier at the machine spindle, shortening non-productive time between operations and simplifying inventory management for tooling spares. Compatibility that simplifies tooling logistics Engineered for use with EPMT 0603 indexable inserts and compatible with inserts from Hitachi, this cutter supports a standardised insert family that reduces the number of different parts kept in stock. The cutter’s cutting height (25.3 mm) and thread height (34.7 mm) match common mounting requirements in modular tooling systems, enabling quick adaptation to different holders or retrofit situations. Specification clarity and interchangeability help purchasing and production planners achieve cost-effective tool consolidation without compromising machining performance. Contact Metav Werkzeuge for tailored recommendations and to arrange supply of the Teknik Makina VT233TM screw-in milling cutter; technical advisors are available by phone or email to confirm suitability for specific applications Technical data Article number: VT233TM Manufacturer: Teknik Makina Type: Screw-in milling cutter for indexable inserts Compatible inserts: EPMT 0603 Compatible insert manufacturer: Hitachi SKU: VT233TM Facts Diameter: 32 mm Overall length: 60 mm Cutting height: 25.3 mm Thread height: 34.7 mm Thread: M16 Number of cutting edges: 5 Cutting angle: 93° Weight: 0.197 kg Torx screw: M2.5 x 5.5 Torx key size: T7 Special features Screw-in design for secure mounting Compatible with standard EPMT 0603 inserts Compact, service-friendly dimensions Suitable for modular tooling systems Manufacturer: Teknik Makina FAQ What inserts does the cutter accept? The cutter accepts EPMT 0603 indexable inserts and is compatible with inserts from Hitachi as stated for the VT233TM screw-in milling cutter. Which thread is used to mount the tool? Mounting is via an M16 thread; the cutter’s threaded interface ensures stable clamping in compatible holders. How many cutting edges are available on the head? The head is manufactured with five cutting edges, which promotes balanced cutting forces and longer tool life under suitable machining conditions. What are the key dimensions to check for holder compatibility? Check the Ø 32 mm head diameter, overall length 60 mm and thread height 34.7 mm to confirm compatibility with existing tool holders. What screw and key are required for insert fastening? Insert fastening uses a M2.5 x 5.5 Torx screw and a T7 Torx key for installation and service. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Screw-In Milling Cutter for LNMU 0303 Indexable Inserts, M16 Thread, 5 Teeth - Teknik Makina
Take advantage of a compact, repeatable holder that combines a secure M16 thread interface with acceptance of LNMU 0303 indexable inserts for reliable small-diameter milling; order the tool directly via Metav Werkzeuge or request consultancy if further specification is required. Screw-in Milling Cutter VT305TM — for LNMU 0303 indexable inserts, Ø 32 mm (Teknik Makina) The Screw-in Milling Cutter VT305TM is a compact tool holder designed for precision milling applications using standard LNMU 0303 indexable inserts, offering a space-saving design for confined tool paths and straightforward insert changes Screw-in cutter with M16 thread 32 mm cutting diameter Accepts LNMU 0303 indexable inserts Torx fixing screw M2.5x7 (T8) Secure insert clamping for consistent repeatability The screw-in design with an M16 thread provides a robust mechanical interface that minimises runout and promotes repeatable positioning of the cutting head. Paired with the supplied Torx M2.5x7 fixing screw and standard T8 key, the holder allows fast and secure clamping of the LNMU 0303 indexable inserts, enabling quick replacement during scheduled maintenance. This configuration reduces set-up time and helps maintain consistent cutting geometry across batches, supporting lean production and predictable tool life. Compact geometry that balances rigidity and access With a Ø 32 mm cutting diameter and a 63 mm overall length, the tool body is engineered to offer a compromise between stiffness and accessibility in tighter machining envelopes. The arrangement of 5 cutting edges distributes cutting forces and can improve surface stability on interrupted cuts or short-step milling operations. The compact dimensions are particularly useful in applications where clearance is limited or where multiple tools must be nested closely in the turret or toolchanger, ensuring the holder remains an effective option for general purpose and finish passes without excessive overhang. Standardisation to simplify inventory and operations Compatibility with the LNMU 0303 insert family and recognised insert supplier codes such as TNGLY-OKE supports parts standardisation across a workshop. Using a common insert type reduces the variety of spare parts held in stock and simplifies reordering, while the familiar Torx interface (T8) keeps the tool serviceable with standard hand tools. For procurement and technical planning the tool body is identified as VT305TM, making specification checks and BOM entries straightforward for purchasing departments and toolroom personnel. For procurement or technical advice on the Teknik Cutting Tools VT305TM screw-in milling cutter with an M16 thread, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VT305TM Product: Screw-in milling cutter For inserts: LNMU 0303 Compatible insert manufacturer: TNGLY-OKE Manufacturer: Teknik Makina Core data Cutting diameter: 32 mm Thread: M16 Overall length: 63 mm Cutting edges: 5 Torx screw: M2.5x7 Torx key: T8 Special features Accepts indexable inserts (LNMU 0303) Compact holder for restricted tool paths Standard Torx mounting for insert retention Identified SKU: VT305TM FAQ What insert type does this tool use? The tool accepts LNMU 0303 indexable inserts, which are mounted and secured by the Torx M2.5x7 screw in the VT305TM holder. Is the holder compatible with inserts from other manufacturers? Compatibility is specified for the TNGLY-OKE insert family; the VT305TM is designed to work with inserts matching the LNMU 0303 geometry and tolerances. What are the key dimensions to consider for setup? Important dimensions include a 32 mm cutting diameter and a 63 mm overall length; the holder is secured via an M16 screw-in thread. Which tool is required to change the insert? Insert clamping and removal use a Torx fixing screw M2.5x7, operated with a T8 key for secure and repeatable retention in the VT305TM holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Screw-In Milling Cutter For LNMX 0603 Indexable Inserts M16 Thread, 5 Cutting Edges - Teknik Makina
Take advantage of robust clamping and precise indexable-insert compatibility to increase machining stability and tool life; the compact design with Ø 32 mm diameter and M16 thread ensures straightforward integration into standard toolholders. Order the cutter directly via Metav Werkzeuge or consult the team for application-specific advice. Screw-in milling cutter VT155TM — for LNMX 0603 indexable inserts, Ø 32 mm, M16 thread (Teknik Makina) A screw-in milling cutter engineered to accept LNMX 0603 indexable inserts for reliable face and shoulder milling with quick, secure insert clamping. Screw-in holder with M16 thread Ø 32 mm cutting diameter Five cutting edges for higher feed Compatible with LNMX 0603 inserts Stable connection for consistent machining performance The VT155TM screw-in milling cutter combines a secure M16 thread with a compact overall length of 67 mm to reduce overhang and increase rigidity. The solid mechanical connection minimises vibration and run-out, which translates directly into improved surface finish and longer insert life. Specified dimensions and the precise clamping geometry make the tool a dependable choice when repeatability and toolholder stability are required on production-critical workpieces. Productivity through insert count and secure clamping Equipped for five effective cutting edges and designed for LNMX 0603 indexable inserts from Korloy, the holder allows frequent index changes while maintaining alignment accuracy. The clamping system uses an M3x7 Torx screw tightened with a T8 key, ensuring positive seat and consistent cutting performance across cycles. This configuration supports efficient chip evacuation and straightforward insert replacement, reducing downtime and supporting continuous machining workflows. Practical fitment and supply reliability Integration is simplified by the standardised screw-in interface and clear specifications: Ø 32 mm diameter and M16 thread permit immediate use with matched spindles or adapter sleeves. Supplied by Teknik Makina and distributed via Metav Werkzeuge, availability from a European stock point helps secure dependable replenishment and consistent lead times. For production environments where predictability matters, this insert holder offers a pragmatic combination of straightforward fitment and shop-floor resilience. Contact Metav Werkzeuge for tailored machining recommendations and to arrange prompt delivery from Emmerich for Teknik Cutting Tools' screw-in milling cutter VT155TM Technical data Article number: VT155TM Manufacturer: Teknik Makina (Teknik Cutting Tools) Facts Cutting diameter: 32 mm Thread: M16 Overall length: 67 mm Number of cutting edges: 5 Special features Compatible inserts: LNMX 0603 Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key size: T8 SKU: VT155TM FAQ Which inserts fit this screw-in milling cutter? The holder accepts LNMX 0603 indexable inserts; compatibility is specified for inserts from Korloy and other manufacturers producing the same ISO designation. What size is the clamping screw and which key is required? Clamping is effected with an M3x7 Torx screw and requires a T8 Torx key for secure tightening. What are the main dimensions to check for machine compatibility? Verify the Ø 32 mm cutting diameter, M16 screw-in thread and 67 mm overall length to ensure correct seating and clearance in the intended toolholder or adapter. Is this tool suited for frequent index changes in production? Yes; the design supports fast insert indexing and repeatable seating, making it suitable for operations with regular insert changes and high machine utilisation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Screw-In Milling Cutter for RPMT 10-12 Indexable Inserts M16 Thread, 3 Cuts, 36mm Cutting Height - Teknik Makina
Take advantage of a compact, screw-in design and proven indexable-insert compatibility to secure consistent milling performance and fast insert changes. Combine the M16 thread and robust Torx locking to reduce downtime—order via Metav Werkzeuge or request tailored advice from our consultants. VT182TM screw-in milling cutter — M16 thread, Ø32 mm (Teknik Makina) A compact VT182TM screw-in milling cutter designed for RPMT 10-12 indexable inserts, offering stable clamping for light to medium milling operations. M16 thread for secure clamping Ø32 mm cutting diameter Compatible with RPMT 10 indexable inserts Torx M3.5x8.5 screws, key T15 Consistent clamping for repeatable finishes The holder's M16 thread and dedicated locking parts ensure a rigid connection to the spindle or arbor, which directly improves repeatability and surface quality. With a locking screw sized M3.5 and a Torx screw M3.5x8.5 driven by a T15 key, the system minimises micro-movement at the insert seat. That mechanical stability translates into fewer reworks and predictable tool life, making the assembly a sound choice where dimensional consistency is critical. Fast insert changes that reduce machine downtime Designed for RPMT 10 indexable inserts, the cutter body accepts standard triangular inserts for quick replacement and economical tooling cycles. Compatibility with established manufacturers such as Mitsubishi allows straightforward sourcing of cutting edges. The indexable concept reduces setup time: worn edges are rotated or swapped without regrinding, improving throughput and keeping machining cells productive in small-batch and mixed-production environments. Compact geometry that balances reach and rigidity With an overall length of 68 mm, cutting height of 36 mm, and a cutting diameter of Ø32 mm, the tool offers a compact profile that limits overhang while providing sufficient engagement for common milling tasks. The shaft and thread geometry produce a low-mass, 0.189 kg assembly that is quick to handle yet engineered for stable cutting. Three cutting edges spread cutting forces evenly, supporting controlled chip formation and extending insert life where consistent chip evacuation is required. Contact Metav Werkzeuge in Emmerich for specification matching or to reserve the VT182TM screw-in milling cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT182TM Manufacturer: Teknik Makina Facts Diameter: 32 mm Total length: 68 mm Cutting height: 36 mm Thread: M16 Thread height: 24.5 mm Number of cutting edges: 3 Weight: 0.189 kg Special features For RPMT 10 indexable inserts Compatible with Mitsubishi inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ Which inserts fit this screw-in cutter? The VT182TM screw-in milling cutter is specified for RPMT 10 indexable inserts and supports RPMT 10–12 styles; Mitsubishi-compatible inserts are confirmed suitable for this holder. What thread and mounting are required? Mounting uses an M16 thread with a 24.5 mm thread height on the VT182TM, providing a secure screw-in connection for standard arbors. How is the insert clamped and serviced? Inserts are secured with a Torx M3.5x8.5 screw; service and replacement require a T15 Torx key and allow fast edge changes without special tools. What machining tasks suit this cutter? The compact geometry with Ø32 mm diameter and three cutting edges makes the VT182TM suitable for light to medium milling operations where rigidity and quick insert exchange are priorities. How does the tool support production efficiency? By combining a robust screw-in mount, standardised RPMT 10 inserts and simple Torx fastening, the VT182TM reduces setup times and maintains consistent cutting performance over repeated cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Screw-In Milling Cutter For SDMT 09T3 Indexable Inserts M16 Thread, 3 Cutting Edges, 40mm Cutting Height - Teknik Makina
Benefit from a compact holder that combines stable screw-in mounting, compatibility with SDMT 09T3 indexable inserts and a robust three-edge geometry to maintain production flow; order via Metav Werkzeuge or request specialist advice from the consultants. Screw-in milling cutter VT240TM – 32 mm diameter, M16 thread (Teknik Makina) The Screw-in milling cutter VT240TM is a screw-in cutter designed for efficient steel machining with SDMT 09T3 indexable inserts, suited to industrial turning and milling toolholders Compatible with SDMT 09T3 indexable inserts 32 mm cutting diameter M16 screw-in thread for secure mounting Three cutting edges for stable material removal High-performance cutting that reduces cycle times The holder’s 32 mm nominal diameter and three cutting edges deliver a balance of material removal rate and stability that supports consistent cycle times in serial production. The geometry is optimised for controlled chip formation when used with SDMT 09T3 indexable inserts from ZCC, which helps to maintain surface quality while reducing vibration. The clamping screw specification (Torx M3.5x8.5) and hex drive (T15) ensure repeatable insert retention, which translates into fewer stoppages for rework and predictable machining results. Quick insert changes and secure mounting for uptime Screw-in mounting via the M16 thread with a 29 mm thread engagement and a compact 69 mm overall length enables rapid exchange of the toolholder and minimal spindle downtime. At just 0.211 kg, the unit keeps tool overhang and centrifugal load modest, aiding tool life and spindle bearing longevity. The straightforward clamp design and widely used Torx screw mean insert replacements are fast and require only standard workshop tools, supporting lean maintenance routines and quick changeover in both single-shift and multi-shift operations. Built for precise steel machining with reliable repeatability Specifically aimed at high-quality steel machining, the construction supports consistent flank finish and dimensional control when combined with appropriate cutting data. The robust screw-in concept reduces axial play and improves concentricity compared with some modular holders, contributing to improved part tolerances and reduced scrap rates. The compact design and compatibility with proven insert geometries make the toolholder a practical choice for workshops seeking reproducible performance in steel turning and milling tasks using indexable inserts. The branded origin and model (Teknik Makina, VT240TM) provide traceability within industrial procurement and maintenance systems. Contact Metav Werkzeuge for tailored technical advice on the VT240TM screw-in milling cutter, availability from Emmerich and recommendations for insert grades and cutting parameters Technical data Article number: VT240TM Brand: Teknik Makina eClass: 21180806 ETIM: EC011860 Numbers / Core technical data Diameter: 32 mm Total length: 69 mm Cutting height: 40 mm Thread: M16 Thread engagement height: 29 mm Weight: 0.211 kg Cutting edges: 3 Special features Compatible with SDMT 09T3 indexable inserts Recommended insert manufacturer: ZCC Torx screw: M3.5x8.5 Torx key size: T15 Screw-in mounting type Suitable for high-quality steel machining FAQ Which inserts fit the holder? The holder accepts SDMT 09T3 indexable inserts; insert compatibility is specified for SDMT 09T3 from ZCC. What fastening parts are required for insert clamping? Insert clamping uses a Torx M3.5x8.5 screw, tightened with a T15 Torx key as supplied by standard workshop tool sets. How is the toolholder mounted in the spindle? Mounting is via the M16 screw-in thread with 29 mm thread engagement and a 69 mm overall tool length for compact installation. Is the VT240TM suitable for steel machining? Yes, the design and recommended insert geometry make the VT240TM appropriate for high-quality steel machining, providing stable cutting and repeatable results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Screw-In Cutter for AP-- 1604 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Take advantage of the combination of internal coolant and a secure M16 threaded mount with a robust three-edge geometry for stable, high-productivity milling. Order the cutter directly via Metav Werkzeuge or ask our consultants for technical integration advice. 35 mm Screw-in Milling Cutter VT166-1TM – M16 thread, internal coolant (Teknik Makina) A 35 mm screw-in milling cutter VT166-1TM engineered for AP-- 1604 indexable inserts, designed to deliver stable face and slot milling in precision workshop and production environments. 35 mm diameter, 60 mm overall length Internal coolant for reliable chip evacuation M16 thread, 24.5 mm thread height Three cutting edges for stable cutting Stable mounting for consistent chip removal and tool life The M16 threaded shank with a 24.5 mm thread engagement ensures a secure clamping interface that reduces runout and vibration during milling. Combined with the three-edge cutter geometry and a 24 mm cutting-edge height, this configuration provides a consistent cutting line and predictable wear behaviour, enabling repeatable part quality and fewer reworks. The design supports efficient material removal while maintaining dimensional accuracy in repetitive production tasks. Coolant-through design to improve performance and surface finish The integrated internal coolant channel directs cutting fluid close to the cutting zone, improving cooling and chip evacuation. This reduces thermal loading on the insert and helps preserve edge integrity for longer tool life. In practice, the coolant-through capability contributes to a more consistent surface finish and fewer built-up edges when machining under demanding conditions, translating into higher throughput and reduced downtime for insert changes. Compatible system for quick indexable-insert changes Designed for the AP-- 1604 indexable inserts, the cutter accepts Korloy-manufactured inserts and uses a standard M4x10 Torx screw (Torx T15) for secure clamping. The standardised fixing method simplifies spare-part management and shortens changeover times on the shop floor. Quick, reliable insert replacement and a familiar fastener standard help to keep setup and maintenance straightforward in mixed-tool environments. Ready for integration into production workflows With an overall length of 60 mm and a mass of 0.211 kg, the tool is compact to store and easy to handle during tool changes. The combination of a proven screw-in interface, coolant-through capability and a three-edge cutting geometry supports both single-part precision work and higher-volume milling tasks. For tailored advice on adapting the cutter to existing toolholders or tool systems, Metav Werkzeuge offers technical guidance and workshop-proven recommendations. Contact Metav Werkzeuge in Emmerich for personalised advice on integrating the Teknik Makina VT166-1TM into production — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: VT166-1TM Manufacturer: Teknik Makina Product: Screw-in milling cutter (Einschraubfräser) Facts Diameter: 35 mm Overall length: 60 mm Weight: 0.211 kg Thread: M16 Thread height: 24.5 mm Cutting-edge height: 24 mm Number of cutting edges: 3 Special features Internal coolant (coolant-through) For AP-- 1604 indexable inserts Compatible with Korloy inserts Torx screw M4x10 (Torx T15) FAQ Which inserts fit this cutter? The cutter is designed for AP-- 1604 indexable inserts, compatible with Korloy-manufactured inserts and matching the VT166-1TM clamping geometry. Does the tool provide coolant-through capability? Yes, the VT166-1TM features internal coolant, which improves chip evacuation and cooling at the cutting edge. What mounting thread is required for installation? Installation requires an M16 threaded female seat; the tool provides a 24.5 mm thread engagement for secure mounting. How many cutting edges and what edge height does it have? The tool has three cutting edges with a cutting-edge height of 24 mm to support stable material removal. Which fastener and driver are used for insert clamping? Insert clamping uses an M4x10 Torx screw tightened with a Torx T15 driver Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Cutter for BLMP 0603 Indexable Inserts 2 Cutting Edges, M16 Thread, 25mm Cutting Height - Teknik Makina
Take advantage of a compact, indexable solution that combines reliable mounting, proven insert compatibility and quick maintenance for consistent milling results — order directly via Metav Werkzeuge or consult our specialists for application advice. VT194TM screw-in milling cutter by Teknik Makina — M16 thread, Ø 35 mm, for BLMP 0603 indexable inserts A VT194TM screw-in milling cutter engineered for secure, repeatable milling with BLMP 0603 indexable inserts in toolroom and production environments M16 thread, Ø 35 mm cutting diameter For BLMP 0603 indexable inserts 2 cutting edges, 25 mm cutting height Supplied with M3x6.5 Torx screw Robust mounting and proven insert compatibility for continuous production The tool body is designed for a stable connection to the spindle via an M16 thread, providing a compact mounting with low runout that supports repeatable results. Compatibility with BLMP 0603 indexable inserts (Taegutec) ensures access to a wide range of grades and geometries, enabling adaptation to different materials and cutting conditions. The combination of a defined mounting standard and standardised inserts reduces setup time and simplifies spare-part management on the shop floor, which improves throughput and lowers the risk of production stops. Efficient cutting performance with easy serviceability Two precisely ground cutting edges and a 25 mm cutting height deliver balanced material removal while maintaining a conservative chip load per edge, which is beneficial for both roughing and finishing passes. The tool’s 100° cutting angle supports secure chip evacuation and stable cutting forces, helping to maintain surface quality and dimension stability. Fast insert replacement is facilitated by the supplied Torx M3x6.5 screw and the matching T8 key, so routine maintenance is straightforward and downtime is reduced. Lightweight, compact design for improved tool handling and spindle life With an overall length of 65 mm and a mass of only 0.044 kg, the cutter imposes minimal inertial load on the spindle while retaining sufficient stiffness for many common milling operations. The relatively small diameter of Ø 35 mm keeps the tool envelope compact, making it suitable for installations with limited clearance or for multi-tool setups. Reduced mass helps to lower vibration tendencies and contributes to longer bearing life, a practical benefit for shops prioritising reliability and predictable tool behaviour. Practical features geared towards workshop convenience The cutter features a M16 thread engagement depth of 25 mm and two-cutting-edge geometry that simplifies regrinds and inventory control. Its design supports the use of Taegutec BLMP 0603 inserts, which are widely available and manufactured in multiple grades, allowing optimisation for aluminium, steel or harder alloy operations where appropriate. The overall package is aimed at users seeking a compact, serviceable milling head that integrates quickly into existing tool systems and replacement cycles. Contact Metav Werkzeuge to discuss how the Teknik Makina VT194TM screw-in milling cutter with M16 mounting and BLMP 0603 compatibility can streamline tooling inventory and reduce changeover time Technical Data Article number: VT194TM Brand: Teknik Makina SKU: VT194TM Measured Data Diameter: 35 mm Thread: M16 Overall length: 65 mm Cutting height: 25 mm Thread length: 25 mm Number of cutting edges: 2 Cutting angle: 100° Weight: 0.044 kg Materials & Special Features Suitable for BLMP 0603 indexable inserts Compatible insert maker: Taegutec Torx screw: M3x6,5 Torx key: T8 FAQ What inserts fit this screw-in milling cutter? The VT194TM is designed for BLMP 0603 indexable inserts, compatible with Taegutec grades suitable for a range of materials. Which thread and diameter does the tool use? The cutter uses an M16 thread and a cutting diameter of 35 mm, providing a compact mounting solution. How many cutting edges are fitted and what is the cutting height? The milling head has 2 cutting edges and a cutting height of 25 mm, offering a balance between material removal and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Cutter For BLMP 0603 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Combine robust process reliability and fast indexable-insert changes with integrated coolant for consistent production. Order the VT194-1TM screw-in milling cutter via Metav Werkzeuge or contact the consultants for a suitability check. VT194-1TM 35 mm screw-in milling cutter for BLMP 0603 – internal coolant, M16 thread (Teknik Makina) VT194-1TM is a screw-in milling cutter designed for high-efficiency indexable-insert milling with BLMP 0603 inserts, suitable for industrial CNC applications where secure mounting and coolant delivery are essential 35 mm cutting diameter Internal coolant supply M16 screw-in connection Compatible with BLMP 0603 inserts Consistent material removal with reduced rework The threaded milling head delivers a 35 mm cutting diameter combined with 5 cutting edges, allowing high metal removal rates while maintaining surface quality. The head is engineered to distribute cutting forces evenly, which reduces vibrations and supports predictable tool life. Internal coolant is routed through the body to the cutting zone, improving chip evacuation and reducing thermal loads; this feature translates into fewer interruptions for tool changes and lower scrap rates on serial runs. Secure mounting and rapid insert service to minimise downtime A robust M16 screw-in connection with a 25 mm thread engagement is provided to ensure concentricity and repeatable reinstallation after service. The design uses a Torx fastening system (Torx key T8, screw M3x6.2) for the clamping of the insert seat, enabling quick, secure access for indexable-insert replacement. Compatibility with BLMP 0603 inserts from established manufacturers such as Taegutec reduces inventory complexity and simplifies maintenance routines, so changeovers are faster and less error-prone. Compact design for versatile machine integration With a total length of 65 mm and a lightweight construction of 0.24 kg, the milling head is suited to many machine configurations where reach and balance are considerations. The cutter’s compact profile supports high-speed indexing and reliable spindle dynamics without excessive overhang. The assembly is designed so that the toolholder interface remains standardised; this assists in predictable tool offsets and straightforward programming adjustments within existing CNC setups. Contact Metav Werkzeuge today to confirm whether the Teknik Makina VT194-1TM matches the production needs and to arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT194-1TM Manufacturer: Teknik Makina Product type: screw-in milling cutter Compatible indexable inserts: BLMP 0603 (Taegutec) Dimensions & performance Diameter: 35 mm Total length: 65 mm Thread: M16 Thread engagement height: 25 mm Cutting edges: 5 Cutting-edge height: 40 mm Weight: 0.24 kg Special features & mounting Internal coolant Torx key: T8 Torx screw: M3x6.2 SKU: VT194-1TM Manufacturer designation: Teknik Makina FAQ Which indexable inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; the VT194-1TM is specified for BLMP 0603 geometries and is compatible with Taegutec inserts of that type. Is coolant delivered to the cutting edge? Yes, the VT194-1TM features internal coolant routed to the cutting zone to support chip evacuation and temperature control during milling. How is the cutter mounted to the arbor or spindle? The cutter uses an M16 screw-in connection with 25 mm engagement; the insert clamping uses a Torx screw (M3x6.2) tightened with a T8 key for secure installation. What are the key dimensions for fixture planning? Key dimensions are 35 mm diameter, 65 mm total length and 25 mm thread engagement; the tool weight is 0.24 kg, which helps with balance and offset calculations. Can the cutter be used across different CNC machines? The VT194-1TM is designed for machine spindles or toolholders that accept an M16 screw-in head; verify that the machine accepts M16-threaded milling heads before use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Cutter for BLMP 0904 Indexable Inserts 4-Flute, 65mm Overall Length - Teknik Makina
Take advantage of the 35 mm diameter and four cutting edges for stable, productive machining; the compact 65 mm overall length keeps setups collision-free while the screw-in interface ensures secure clamping. Order the tool through Metav Werkzeuge for reliable delivery or consult our specialists for application guidance. VT267TM 35 mm Screw-in Milling Cutter — for BLMP 0904 Indexable Inserts (L65 mm) The VT267TM screw-in milling cutter is a compact, indexable-head tool engineered for high-efficiency face and shoulder milling with BLMP 0904 inserts in demanding production environments. 35 mm cutter diameter Compatible with BLMP 0904 inserts Four cutting edges for balanced cutting 65 mm overall length for compact setups Repeatable metal removal with stable cutting geometry The design delivers consistent chip formation thanks to its balanced head and four cutting edges, which reduce vibration and promote uniform wear. Using indexable inserts simplifies tool management: worn inserts are replaced quickly without regrinding, restoring cutting performance in minutes. The screw-in interface secures the head into the holder with a defined thread profile, improving concentricity and run-out control for predictable surface finishes and tighter tolerances. Compact form for tight tool envelopes and dynamic balance With an overall length of 65 mm and a cutter diameter of 35 mm, the configuration was conceived for machines and fixtures with limited clearance. The 40 mm cutting-edge height and a thread engagement of 25 mm provide enough support for axial loads while keeping the centre of mass close to the spindle—beneficial for faster acceleration and reduced chatter. The tool’s modest mass (approx. 0.234 kg) aids spindle dynamics and minimises unproductive toolpath constraints, permitting faster cycle times in many setups. Secure clamping and simple maintenance to reduce downtime Clamping integrity is achieved with a robust thread (size 16) and high-quality fastening hardware: the head is retained using a M3.5x8.5 Torx screw, tightened with a Torx T10 key for reproducible torque. Compatibility with inserts from established suppliers such as Taegutec means a wide choice of grades and geometries for different materials and cut conditions. The VT267TM toolhead style shortens changeover time and supports continuous production through straightforward serviceability. For consistent, compact and easily maintainable cutting performance from Teknik Makina, contact Metav Werkzeuge to confirm fitment and select the optimal BLMP 0904 insert grade for the application — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: VT267TM Label: 35mm Einschraubfräser BLMP 0904 L65mm Manufacturer: Teknik Makina E-class: 21180806 Core specifications Diameter: 35 mm Overall length: 65 mm Thread size: 16 Thread engagement height: 25 mm Cutting edges: 4 Cutting-edge height: 40 mm Fastening screw: M3.5x8.5 Torx key: T10 Weight: 0.234 kg Compatibility & features For BLMP 0904 indexable inserts Compatible inserts manufacturer: Taegutec Product type: Screw-in milling cutter SKU: VT267TM Category path: Zerspanen > Einschraubfräser FAQ What insert type fits this cutter? The VT267TM is designed for BLMP 0904 indexable inserts, and compatible grades from Taegutec are commonly used for a broad range of materials. Can the cutter be used in compact machine setups? Yes, the 65 mm overall length and 35 mm diameter of the tool make it suitable for compact tool envelopes and reduced collision risk in congested fixtures. How is the head secured to the holder? The head of the VT267TM is fixed by a threaded screw interface (thread size 16) and retained with a M3.5x8.5 Torx screw tightened with a T10 key for reproducible clamping. How many cutting edges does the tool have and what’s the benefit? This screw-in milling cutter has four cutting edges, providing balanced cutting forces that help lower vibration and improve surface finish consistency. Is the cutter compatible with inserts from other manufacturers? The VT267TM is specified for BLMP 0904 inserts and is compatible with inserts supplied by Taegutec, offering flexibility in grade selection for different applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Cutter for EPMT 0603 Indexable Inserts 5 Teeth, M16 Thread, 25.3mm Cutting Height - Teknik Makina
Benefit from a robust combination of an M16 thread, five cutting edges and compatibility with EPMT 0603 indexable inserts for stable and productive milling. Order the VT234TM directly via Metav Werkzeuge or consult our specialists for application-specific advice. VT234TM Screw-in Milling Head — for EPMT 0603 indexable inserts, M16, Ø35 mm (Teknik Makina) The VT234TM screw-in milling head is engineered for secure face and shoulder milling with EPMT 0603 indexable inserts, offering a compact assembly that suits precision-oriented production environments. Screw-in milling head for EPMT 0603 inserts M16 thread with 35 mm outside diameter Five cutting edges, 93° cutting angle Torx screw M2.5x5.5, T7 key required Compact overall length 60 mm, 224 g weight Secure mounting for consistent tool life and low runout A secure thread and clamping system reduce vibration and maintain concentricity during heavy cuts. The M16 thread combined with a tight clamp interface ensures repeatable seating and reduced tool runout, which in turn preserves insert life and surface finish. The supplied fastening method uses a Torx M2.5x5.5 screw tightened with a T7 key, providing a reliable mechanical joint that simplifies replacement cycles while keeping the cutter head stable under intermittent loads. Geometry tuned for efficient material removal with low cutting forces The cutter head’s five cutting edges and a 93° cutting angle deliver balanced chip formation and steady engagement across the tool body. The Ø35 mm diameter and a cutting height of 25.3 mm permit effective axial engagement for both roughing and semi-finish operations, reducing the number of passes required. Using EPMT 0603 indexable inserts provides a cost-efficient, modular approach to edge management: replace individual inserts rather than the entire head, maintaining productivity and lowering per-part cost. Compatibility and maintainability to reduce downtime Designed to accept EPMT 0603 indexable inserts and compatible with Hitachi-style insert geometry, the tool integrates into established tool families without the need for special adaptors. The compact 60 mm overall length and a mass of 0.224 kg make handling and tool-change operations straightforward. Thread engagement length of 34.7 mm gives sufficient clamping depth for secure mounting in standard toolholders. Should customers require further specification checks or machining recommendations, Metav’s technical team can provide tailored guidance and application data to support process integration. Contact Metav Werkzeuge for tailored procurement and technical advice on the Teknik Makina VT234TM screw-in milling head; our Emmerich location supplies components and expertise for reliable production continuity. Technical Data Article number: VT234TM Manufacturer: Teknik Makina Designation: Screw-in milling head for EPMT 0603 indexable inserts Data Diameter: 35 mm Thread: M16 Overall length: 60 mm Cutting edges: 5 Cutting height: 25.3 mm Thread engagement height: 34.7 mm Weight: 0.224 kg Cutting angle: 93° Special features Indexable insert type: EPMT 0603 Compatible with insert manufacturer: Hitachi Torx screw: M2.5x5.5 Torx key: T7 Bezeichnung_2_en: for EPMT 0603 Indexable Inserts FAQ Which insert type fits this screw-in milling head? The VT234TM screw-in milling head accepts EPMT 0603 indexable inserts, designed to match the insert pocket and locking geometry specified for that series. Is the VT234TM compatible with Hitachi inserts? Yes — the cutter head is compatible with Hitachi-style inserts of the EPMT 0603 form factor and can be used where that insert family is specified. What torque/fastening is required for insert changes? Insert retention uses a Torx M2.5x5.5 screw tightened with a T7 key; use the recommended tightening procedure to ensure secure clamp and repeatability. For which applications is this milling head intended? The VT234TM is suitable for face and shoulder milling where a compact screw-in solution with modular EPMT 0603 inserts is required, offering efficient material removal and straightforward insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Screw-In Cutter for LOGU 0303 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Take advantage of a compact, secure mounting system combined with internal coolant and broad insert compatibility to keep machining cycles efficient and reliable. Order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in cutter VT318-1TM – 35 mm, internal coolant for LOGU 0303 indexable inserts (Teknik Makina) The Screw-in cutter VT318-1TM is a compact milling head engineered for secure screw-in mounting and routine slotting or face milling operations using LOGU 0303 indexable inserts, suitable for workshop and light industrial CNC applications. 35 mm diameter for medium-duty milling Internal coolant for effective chip evacuation M16 screw-in connection, 25 mm thread height Compatible with Kyocera LOGU 0303 indexable inserts Secure mounting for consistent tolerances and rapid set-up The VT318-1TM’s M16 thread and 25 mm screw-in engagement provide a rigid connection to the arbor, which reduces runout and supports repeatable positioning during tool changes. The compact 65 mm overall length and 35 mm outer diameter mean a small collision radius and easier access to confined work envelopes. With a nominal weight of 0.23 kg, the body balances inertia and stability, helping to maintain stable cutting conditions and predictable surface finish when paired with the correct grade of insert. Coolant-through design reduces heat and extends insert life The cutter’s internal coolant channel feeds cutting fluid directly to the cutting zone, improving cooling and chip evacuation compared with external-only supply. This targeted coolant delivery lowers cutting temperature, which in turn helps to maintain insert edge integrity and reduces the risk of built-up edge. For shops aiming to increase uptime, the coolant-through function is a practical way to extend service intervals and preserve cutting performance under continuous operation. Standardised inserts and simple servicing to minimise downtime Compatibility with Kyocera LOGU 0303 indexable inserts gives access to a wide range of grades and geometries for turning a single head into a multi-application tool. The insert is secured with an M3x7 Torx screw (Torx drive T8), enabling rapid, repeatable insert changes with standard workshop tools. This standardisation reduces inventory complexity and allows quick adaptation between finishing and roughing tasks without changing the toolholder. Productivity-focused geometry and maintenance advantages Five cutting edges on the head increase effective material engagement per revolution while the 40 mm cutting height allows deeper cuts where process windows permit. The cutter body is designed for straightforward replacement of wear parts and quick reconditioning, supporting lean tooling strategies and cost-efficient production planning. For procurement and operations teams, the overall package supports shorter cycle times and steady throughput when integrated into an established tooling system. Secure supply of the Teknik Makina VT318-1TM is available from Metav Werkzeuge—contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for precise tooling recommendations and order coordination Technical data Article number: VT318-1TM Product: Screw-in cutter Label: 35 mm screw-in cutter LOGU 0303 L65 mm with internal coolant Brand: Teknik Makina Facts Diameter: 35 mm Overall length: 65 mm Thread: M16 Thread height: 25 mm Cutting edges: 5 Cutting height: 40 mm Weight: 0.23 kg Torx screw: M3x7 Torx key: T8 eClass: 21180806 Special features Internal coolant Compatible with Kyocera LOGU 0303 indexable inserts Screw-in mounting for reduced runout Compact design for restricted workplaces FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; Kyocera-manufactured inserts in the LOGU 0303 family are compatible with the VT318-1TM. Is the tool coolant-through? Yes, the VT318-1TM features internal coolant, which supplies cutting fluid directly to the cutting edge to aid chip evacuation and temperature control. What is the thread size for the screw-in connection? The head uses an M16 screw-in connection with a 25 mm thread engagement for secure mounting. How are inserts secured to the head? Inserts are fastened with an M3x7 Torx screw using a T8 Torx key for quick and reliable insert changes. What applications is this cutter suited to? The cutter is intended for medium-duty slotting and face milling operations on CNC and conventional machines when used with appropriate LOGU 0303 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Cutter For RDMT 1003 Indexable Inserts With Internal Coolant, L60mm - Teknik Makina
Take advantage of the combination of high material removal rates, secure screw-in clamping and reliable coolant management for consistent machining cycles. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Screw-in milling cutter for RDMT 1003 indexable inserts — 35 mm, internal coolant (Teknik Makina) Screw-in milling cutter for general milling applications that accepts RDMT 1003 indexable inserts, designed for secure M16 clamping and internal coolant feed Compact 35 mm diameter Internal coolant for extended tool life Holds RDMT 1003 indexable inserts M16 screw-in thread for secure clamping Faster material removal with dependable coolant support This screw-in milling cutter is engineered to deliver high productivity in interrupted and continuous milling operations. The combination of a 35 mm diameter cutting head and 5 cutting edges enables efficient material removal while maintaining a stable cut. Integrated internal coolant supplies coolant directly to the cutting zone, improving chip evacuation and reducing thermal load on the insert. The result is longer tool life and fewer index changes, which translates into lower process interruptions and more predictable cycle times on the shop floor. Robust clamping and practical service design reduce downtime A secure connection is critical in high-feed machining. The tool features an M16 screw-in thread and a dedicated thread height of 24.5 mm, providing reliable axial support and repeatable seating for each change. Insert retention is via the supplied M3.5x8.5 Torx screw, tightened with a T15 Torx key, enabling quick insert replacement and minimised handling time. With an overall length of 60 mm and a cutter height of 35.5 mm, the assembly balances accessibility with rigidity, helping to reduce vibration and improve surface finish on finished components. Designed for straightforward integration and consistent results Compatibility with RDMT 1003 indexable inserts allows flexible selection of grades and geometries for specific workpiece materials and machining strategies. The tool’s measured weight and compact form factor support simple balancing and easier tool magazine handling in automated cells. Clear mechanical interfaces — screw-in shank, standard Torx fastening and internal coolant channels — make the component straightforward to specify and maintain. Supplied as a precision-made item from Teknik Makina, the cutter fits into established tooling systems and supports repeatable set-ups across batches. Contact Metav Werkzeuge for tailored application advice and secure availability from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: VT107-1TM Product type: Screw-in milling cutter Brand: Teknik Makina Core technical data Diameter: 35 mm Overall length: 60 mm Thread height: 24.5 mm Cutter height: 35.5 mm Number of cutting edges: 5 Weight: 0.211 kg Thread: M16 Materials & features Internal coolant: yes Compatible inserts: RDMT 1003 Torx key: T15 Torx screw: M3.5x8.5 FAQ Which indexable inserts fit this tool? The cutter accepts RDMT 1003 indexable inserts, allowing selection of grades and geometries suited to different materials and cutting conditions. Does the tool provide through-tool coolant? Yes — the internal coolant channel feeds coolant to the cutting zone, improving chip flow and thermal control for the Teknik Makina screw-in milling cutter (SKU VT107-1TM). What thread and clamping method are used? Clamping is by an M16 screw-in thread with a 24.5 mm thread height for stable seating and repeatable positioning. Which fastening parts are supplied or required? The insert is secured with an M3.5x8.5 Torx screw, tightened with a T15 Torx key, enabling quick insert changes and minimal downtime. What are the key dimensions to check for machine compatibility? Confirm the 35 mm diameter, 60 mm overall length, cutter height of 35.5 mm and the M16 thread to ensure compatibility with the spindle adapter or toolholder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Cutter for RDMT 1003 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Take advantage of a compact, coolant-fed design combined with a secure M16 screw-in mounting and compatibility with RDMT 1003 indexable inserts for reliable, repeatable machining performance; order directly via Metav Werkzeuge or consult our specialists for application advice. VT106-1TM 35 mm screw-in milling cutter – M16 thread, internal coolant (Teknik Makina) The VT106-1TM 35 mm screw-in milling cutter is a coolant-fed milling head for RDMT 1003 indexable inserts, designed for stable slotting and shoulder milling in workshop and production environments. 35 mm diameter for stable cutting M16 screw-in thread for secure mounting Internal coolant for improved chip evacuation Compatible with RDMT 1003 indexable inserts Four cutting edges for balanced performance Stable cutting with balanced geometry The VT106-1TM screw-in milling head is engineered for consistent material removal: its 35 mm diameter and four cutting edges deliver a balanced cut that reduces vibration and promotes even wear across the inserts. That balance translates into steadier surface finishes and predictable tool life, lowering the frequency of regrinds or replacement. The crown-shaped mass distribution and precisely finished contact surfaces ensure concentric running when clamped into standard M16 screw-in adaptors, supporting repeatable results on both bench and machine-mount setups. Coolant-fed design that extends tool life Built-in internal coolant channels feed cutting fluid directly to the cutting zone, improving chip evacuation and heat control during heavy cuts. This targeted cooling reduces thermal loading on both the inserts and carrier, which slows abrasive and thermal wear and helps maintain cutting geometry for longer. For operations that cycle between finishing and roughing passes, the coolant-fed design provides a tangible benefit in maintaining surface quality and reducing downtime for insert changes. Secure mounting and straightforward maintenance The M16 screw-in connection, with its defined thread height, offers robust clamping and simple removal for maintenance. The cutter accepts standard RDMT 1003 grade inserts and is secured using the supplied Torx fastening system (Torx key T15, screw M3.5x8.5), enabling quick insert indexing and replacement with minimal setup time. The design keeps service tasks lean, so changeovers are fast and can be carried out without specialised fixtures, supporting higher machine availability and lower labour costs. Practical fit for workshop and production use With an overall length of 60 mm and a compact weight, the carrier is suitable for a wide range of milling applications where indexable-insert tooling is preferred. Its compatibility with RDMT 1003 inserts makes it a flexible choice for operations seeking an economical combination of insert life and cutting performance. Combined with a dependable supply chain and Metav’s quality filtering for the European market, this tool supports stable production runs and straightforward reordering when replacement units or spare screws are required. For tailored application recommendations or to secure supply of Teknik Makina screw-in milling cutters, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert advice and reliable delivery Technical data Article number: VT106-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Key figures Diameter: 35 mm Overall length: 60 mm Weight: 0.201 kg Thread height: 24.5 mm Cutting-edge height: 35.5 mm Number of cutting edges: 4 Features & accessories Thread: M16 Cooling: internal coolant Inserts: RDMT 1003 Torx key: T15 Torx screw: M3.5x8.5 FAQ What inserts does this cutter accept? The VT106-1TM screw-in milling cutter is designed for RDMT 1003 indexable inserts, allowing use of a wide range of grades for differing materials and cutting conditions. Does the tool provide internal coolant? Yes, the carrier is supplied with internal coolant channels to direct fluid to the cutting zone and improve chip evacuation and tool life. How is the cutter mounted and secured? Mounting uses an M16 screw-in thread; inserts are fixed with Torx screws (Torx key T15, screw M3.5x8.5) for quick and reliable replacement. Which machining tasks suit this cutter best? This screw-in milling head is well suited to slotting and shoulder milling operations where indexable inserts and coolant-fed performance are required in both workshop and small-series production. Is the VT106-1TM simple to service in a busy shop? Yes, the secure M16 mounting and standard Torx fastening allow rapid insert changes and straightforward service, helping to keep machine uptime high. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Face Mill for APKT 1003 Indexable Inserts, M16 Thread, 4 Cutting Edges - Teknik Makina
Take advantage of the combination of secure screw-in mounting, Ø 35 mm cutting diameter and fast insert changes for reliable, high‑productivity milling; order through Metav Werkzeuge or ask the consultants for application advice. Screw-in milling cutter for APXT 1003 indexable inserts — Teknik Makina, Ø 35 mm, M16 thread A screw-in milling cutter designed for stable face and shoulder milling with APKT/APXT 1003 indexable inserts in general workshop and light production environments. Screw-in design with M16 thread Ø 35 mm cutter diameter 4 cutting edges for stable machining Compatible with APKT 1003 inserts Stable mounting for consistent machining results The screw-in design with an M16 thread provides a secure interface that reduces runout and vibration, which translates into improved surface finish and predictable tool life. With a Ø 35 mm diameter and a compact 60 mm overall length the tool offers a rigid cutting geometry that supports higher feed rates without sacrificing repetition accuracy. This robustness is especially beneficial where short setup times and low scrap rates are required, making the holder a practical choice for repetitive shoulder and face milling operations. Fast insert changes and reliable clamping cut downtime Designed for APKT 1003 (APXT 1003) indexable inserts, the tool accepts common triangular inserts from major suppliers such as Korloy, ensuring broad availability and choice. The cutting inserts are secured by a Torx screw M2.5x5.5 driven with a T8 key, enabling quick, repeatable replacement with minimal recalibration. Fewer and faster insert changes reduce non‑productive time and support continuous shopfloor throughput, while the standardised interface helps keep inventory and tooling planning straightforward. Compact dimensions that suit varied set-ups With a cutting height of 35.5 mm and a thread height of 24.5 mm, the cutter balances reach and stiffness for many common milling fixtures. The tool’s 90° cutting angle is optimised for square shoulders and precise face milling, while a mass of 0.225 kg keeps handling simple during tool changes and inventory handling. These measured dimensions make the component well suited for modular toolholders and compact milling heads where space is limited yet stability remains essential. Request a technical consultation from Metav Werkzeuge to confirm fitment and production suitability — Metav Werkzeuge can advise on inserts, clamping torque and optimal feeds for the Teknik Makina screw‑in milling cutter (VT146TM) Technical data Article number: VT146TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter for indexable inserts Compatible inserts: APKT 1003 / APXT 1003 Core technical data Diameter: 35 mm Thread: M16 Number of cutting edges: 4 Overall length: 60 mm Cutting height: 35.5 mm Thread height: 24.5 mm Cutting angle: 90° Weight: 0.225 kg Torx screw: M2.5x5.5 Torx key: T8 SKU: VT146TM ECLASS: 21180806 ETIM: EC011860 Special features Screw-in mounting for low runout Compatible with Korloy and equivalent inserts Compact, rigid design for face and shoulder milling Quick‑change Torx clamping system Suitable for APKT/APXT 1003 indexable inserts FAQ What inserts fit this screw-in milling cutter? The screw‑in milling cutter accepts APKT 1003 / APXT 1003 indexable inserts; common manufacturers such as Korloy supply compatible grades for varied materials. Is the cutter suitable for shoulder milling on steel? Yes, the VT146TM cutter’s Ø 35 mm diameter and 90° cutting angle deliver the rigidity and geometry required for precise shoulder milling in typical steel applications. How is the insert secured and what tool is needed? Inserts are secured with a Torx screw M2.5x5.5; a T8 Torx key is used for tightening to achieve repeatable clamping. Can the cutter be used in compact toolholders? The 60 mm overall length and M16 screw‑in interface make the cutter compatible with many compact toolholder systems while maintaining stiffness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Face Mill for APKT 1604 Indexable Inserts, M16 Thread, 3 Teeth, 90° Cutting Angle - Teknik Makina
Take advantage of the secure M16 screw-in connection, three cutting edges and APKT 1604 insert compatibility for efficient, repeatable milling; order directly via Metav Werkzeuge or consult the specialists for application advice. Teknik Makina Screw-in Milling Cutter VT166TM — 35 mm diameter, M16 thread for APKT 1604 inserts The screw-in milling cutter VT166TM is a compact, M16‑threaded tool designed for face and shoulder milling with APKT 1604 indexable inserts, providing a robust clamping solution for short‑setups. M16 screw‑in connection Compatible with APKT 1604 inserts Three cutting edges for stable cutting Torx M4x10 clamping screw, T15 key Secure clamping that reduces setup variability The M16 screw‑in connection with a thread engagement of 24.5 mm and a dedicated M4x10 Torx clamping screw (Torx key T15) gives mechanically secure tool retention and consistent repeatability. This rigid interface minimises micro‑movement during heavy cuts and shortens rework rates, so machine time becomes more predictable. The quick clamping arrangement also reduces changeover time, which supports higher overall equipment effectiveness and a leaner production flow. Stable cutting performance and predictable tool life With a 35 mm diameter and three cutting edges, the cutter distributes chip load evenly across inserts for controlled material removal. The 90° cutting angle and a cutting height of 35.5 mm deliver reliable face and shoulder milling performance, enabling efficient stock removal while maintaining surface finish. The robust geometry supports steady cutting conditions that translate into repeatable tool life and planning certainty for batch production or continuous operation. Compatibility and practical maintenance for uninterrupted production Designed for APKT 1604 indexable inserts (compatible with Korloy grades), the tool allows fast insert replacement and offers flexibility in carbide grades for different applications. The compact overall length (60 mm) and low mass (approx. 0.211 kg) limit spindle load and improve accessibility in confined set‑ups. Routine maintenance requires only a T15 key for the M4x10 screw, enabling safe, fast insert changes and minimal downtime for servicing the cutter. For tailored advice on integrating the Teknik Makina screw‑in milling cutter VT166TM into production, contact Metav Werkzeuge for application support and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT166TM Name: Screw-in milling cutter for APKT 1604 indexable inserts Manufacturer: Teknik Makina Weight: 0.211 kg Facts Diameter: 35 mm Overall length: 60 mm Cutting height: 35.5 mm Thread engagement height: 24.5 mm Thread: M16 Number of cutting edges: 3 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 ECLASS: 21180806 ETIM: EC011860 Special features Compatible with APKT 1604 indexable inserts Suitable for Korloy APKT 1604 insert grades Secure screw‑in connection for repeatable positioning Compact design for restricted workspaces FAQ Which inserts fit this cutter? The cutter accepts APKT 1604 indexable inserts; VT166TM is designed for standard APKT 1604 geometries and is compatible with Korloy insert grades. What is the thread specification and how is the tool secured? VT166TM uses an M16 screw‑in connection with a thread engagement of 24.5 mm and is secured by an M4x10 Torx clamping screw tightened with a T15 key. How many cutting edges are provided and what is the cutting angle? The tool is fitted with three cutting edges and a 90° cutting angle to provide stable face milling and predictable cutting performance. What are the main dimensions and mass of the cutter? Key figures for the cutter: diameter 35 mm, overall length 60 mm, cutting height 35.5 mm, weight approx. 0.211 kg. Which tool is required for insert changes? Insert and clamping screw changes are performed with a T15 Torx key for the M4x10 clamping screw on VT166TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Face Mill For APMT 0903 Indexable Inserts 5 Teeth, M16 Thread 25.3mm Cutting Height - Teknik Makina
Take advantage of a compact design that combines precision clamping, stable machining and easy insert replacement for reliable cycle times. Benefit from broad compatibility with industry-standard APMT 0903 indexable inserts and order directly via Metav Werkzeuge or request technical advice from the consultants at Metav. VT228TM screw-in milling cutter — Ø35 mm, M16 thread (Teknik Makina) The VT228TM screw-in milling cutter for APMT 0903 indexable inserts is a compact tool body engineered for stable face and shoulder milling in CNC and turning-milling operations For APMT 0903 indexable inserts Ø35 mm head with M16 screw-in thread Five cutting edges for balanced machining Torx M2.5x5.5 clamping screw, T7 key Stable clamping and consistent cutting quality The robust M16 screw-in connection and specified thread length of 40 mm deliver a secure interface that keeps the cutting geometry stable under load. With a Ø35 mm head and five cutting edges, the body is designed to distribute forces evenly so that vibration is minimised and surface finish consistency is improved. The result is predictable tool behaviour and fewer unexpected rejects, which supports lean production planning and process reliability. Quick insert changes and proven insert compatibility Clamping is performed with a Torx M2.5x5.5 screw (Torx key T7), enabling rapid and repeatable insert replacement. The cartridge is made for APMT 0903 indexable inserts, a widespread insert format; compatibility with Korloy inserts increases sourcing flexibility and helps to lower inventory pressure. The moderate 15° cutting angle promotes effective chip formation and a controlled cutting force, which can reduce cycletime variation in mixed-batch production. Shop-floor practicality and handling advantages With a total length of 65.3 mm and a cutting height of 25.3 mm, the body is compact yet accessible for routine maintenance; the weight (0.261 kg) supports balanced spindle loads in many standard toolholders. The design focuses on straightforward replacement and secure clamping, so set-up times are reduced and tool management becomes more predictable. Supply is supported by Metav’s distribution in Emmerich, offering consistent availability and a quality filter for the European market. For a tailored compatibility check, technical specification or rapid procurement from Metav Werkzeuge, contact Metav’s consultants for a precise recommendation and delivery options on the Teknik Makina VT228TM screw-in milling cutter Technical data Article number: VT228TM Manufacturer: Teknik Makina Suitable for indexable inserts: APMT 0903 Compatible insert maker: Korloy Data Diameter: 35 mm Total length: 65.3 mm Thread: M16 Thread length: 40 mm Cutting height: 25.3 mm Number of cutting edges: 5 Cutting angle: 15° Weight: 0.261 kg Torx screw: M2.5x5.5 Torx key: T7 Special features For APMT 0903 indexable inserts Compatibility with Korloy inserts Secure M16 screw-in mounting Five-edge geometry for balanced cutting Rapid insert clamping with Torx screw FAQ Which inserts fit this tool body? The VT228TM screw-in milling cutter accepts APMT 0903 indexable inserts; Korloy-compatible grades are suitable and commonly available. What fastening hardware is required for insert replacement? Insert clamping uses a Torx M2.5x5.5 screw secured with a T7 key for repeatable torque and quick changes. What are the key dimensions to check for machine integration? Relevant dimensions are Ø35 mm head, total length 65.3 mm, thread M16 with 40 mm engagement and cutting height 25.3 mm. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Face Mill For RDMT 1003 Indexable Inserts 5 Cutting Edges, M16 Thread - Teknik Makina
High stability from the secure M16 thread, compact 35 mm diameter and a five-edge cutting configuration deliver consistent material removal and low vibration. Benefit from a robust 60 mm overall length and reduced changeover time thanks to standard RDMT 1003 indexable inserts. Order the Teknik Makina VT107TM screw-in milling cutter directly via Metav Werkzeuge or consult the specialists if specification advice is required. VT107TM screw-in milling cutter (35 mm, M16) by Teknik Makina The VT107TM is a screw-in milling head engineered for compact milling operations with RDMT 1003 indexable inserts, offering secure mounting and high repeatability for CNC and machine-tool applications. Screw-in design for RDMT 1003 inserts 35 mm diameter for compact operations M16 mounting thread for secure fit Five cutting edges for productive material removal Secure mounting for consistent results The screw-in design with a M16 thread and a thread height of 24.5 mm provides a rigid connection between spindle and cutter, reducing runout and improving tool life. With a 35 mm diameter, the tool suits tight setups where a compact head is needed without compromising stiffness. The moderate weight of 0.211 kg supports rapid spindle acceleration while maintaining balance in high-speed machining. These characteristics translate into fewer tool-change interruptions and more predictable cycle times on production machines. High productivity through replaceable inserts Equipped to accept RDMT 1003 indexable inserts and configured with five cutting edges, the tool delivers steady material removal with each revolution. The design includes a M3.5 locking screw and a Torx screw (M3.5x8.5), assembled using a T15 Torx key, which ensures quick and repeatable insert changes. Using indexable inserts reduces overall tooling cost and downtime compared with solid tools, while allowing a choice of grades and chipbreakers to match the workpiece material and surface finish requirements. Integration into workshop workflows With an overall length of 60 mm overall length, the milling head is easy to incorporate into standard tool-holders and modular spindle setups. The compact profile supports operations where access is limited but reliable cutting performance is mandatory. The engineering of the head focuses on practicality: straightforward mounting, standard fasteners and compatibility with widely used insert geometry mean that maintenance routines are simple and spare parts are readily available, supporting uninterrupted production schedules. Select the Teknik Makina VT107TM for compact, secure and productive milling — contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VT107TM Manufacturer: Teknik Makina Product: Screw-in milling cutter for RDMT 1003 indexable inserts ECLASS: 21180806 ETIM: EC011860 Numbers / Core technical data Diameter: 35 mm Overall length: 60 mm Cutting height: 35.5 mm Thread height: 24.5 mm Thread: M16 Cutting edges: 5 Weight: 0.211 kg Special features / Design Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which indexable inserts fit this milling head? The VT107TM is designed for RDMT 1003 indexable inserts; use inserts with the matching geometry and grade for the required application. What is the mounting thread and how deep is it engaged? Mounting uses an M16 screw-in thread with a thread height of 24.5 mm, providing a secure engagement for stable cutting. How many cutting edges are available and what is the cutting height? The tool features five cutting edges and a cutting height of 35.5 mm to allow productive engagement per revolution. Which fasteners are required for insert clamping? Insert clamping uses an M3.5 locking screw and an M3.5x8.5 Torx screw; assembly and service require a T15 Torx key. What are the overall dimensions and mass of the cutter? Overall length is 60 mm, diameter 35 mm and the unit weighs approximately 0.211 kg, suitable for compact spindle arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Face Mill for RDMT 1003 Indexable Inserts, M16 Thread, 4 Cuts - Teknik Makina
Take advantage of the combination of secure screw-in mounting, compatibility with RDMT 1003 indexable inserts and a compact 35 mm diameter for stable, repeatable milling results; order the VT106TM directly via Metav Werkzeuge or consult their technical advisors for process integration. VT106TM screw-in cutter – 35 mm diameter, M16 thread, for RDMT 1003 indexable inserts (Teknik Makina) A robust VT106TM screw-in cutter engineered for screw-in mounting in production toolholders and optimised for RDMT 1003 indexable inserts, suitable for medium-duty milling and finishing operations 35 mm diameter for medium-duty milling M16 screw-in thread for secure mounting Compatible with RDMT 1003 indexable inserts Four cutting edges for consistent material removal Stable mounting for repeatable production results The screw-in design with an M16 thread and a compact 35 mm diameter delivers a firm mechanical connection that reduces run-out and vibration during machining. This stability translates into consistent surface quality and predictable tool life, which is crucial for batch production and CNC operations. The cutter’s overall length of 60 mm and a thread engagement height of 24.5 mm ensure secure seating in compatible toolholders, while the modest mass of 0.201 kg helps to keep dynamic loads low. For engineers and workshop managers, the result is fewer set-up checks and more reliable cycle times. Rapid insert changes with secure fastening and defined geometry Designed for RDMT 1003 indexable inserts, the tool carries four cutting edges, allowing multiple indexings before replacement. The cutting height of 35.5 mm provides the necessary reach for common face and slot milling tasks, and the insert clamping uses an M3.5 locking screw together with a Torx screw M3.5x8.5 tightened with a T15 key, giving a reproducible clamping torque and quick serviceability. This arrangement reduces downtime for insert changes and simplifies maintenance routines, improving overall equipment effectiveness in production environments. Practical applications and workshop integration Suited to general milling and finishing tasks in a CNC or toolroom setting, the screw-in cutter is a compact alternative when space in the spindle or holder is limited. Its compatibility with a widely used insert format makes it straightforward to integrate into existing tooling systems, while the defined mechanical interfaces support a predictable tool-change procedure. The combination of indexable insert compatibility, secure Torx fastening and a proven screw-in mount supports efficient inventory management and reduces the number of dedicated solid tools required on the shop floor. Contact Metav Werkzeuge to discuss how the Teknik Cutting Tools VT106TM with M16 screw-in mounting and RDMT 1003 compatibility can be integrated into current tool setups — Metav Werkzeuge’s specialists in Emmerich are available by email or phone Technical data SKU: VT106TM Article name: screw-in cutter Brand: Teknik Makina For inserts: RDMT 1003 indexable inserts eClass: 21180806 ETIM: EC011860 Core technical data Diameter: 35 mm Overall length: 60 mm Cutting height: 35.5 mm Thread engagement height: 24.5 mm Thread: M16 Number of cutting edges: 4 Weight: 0.201 kg Special features Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Screw-in mounting for secure, repeatable seating Compatible with RDMT 1003 indexable inserts FAQ What insert type does this cutter accept? The cutter is designed for RDMT 1003 indexable inserts and provides a secure pocket and clamping arrangement for reliable performance. How is the insert secured in the cutter? Inserts are clamped using an M3.5 locking screw together with an M3.5x8.5 Torx screw; tightening is performed with a T15 key for reproducible clamping. What are the key mounting dimensions to check in a toolholder? Check the M16 screw-in thread and the 24.5 mm thread engagement height to ensure compatible seating in the toolholder. Is the cutter suitable for automated tool changes? The screw-in design with defined mechanical interfaces supports repeatable positioning and is compatible with automated or manual tool-change workflows in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Face Mill For SDMT 09T3 Indexable Inserts M16 Thread, 3 Cutting Edges, 40mm Cut Height - Teknik Makina
Take advantage of the combination of secure M16 screw-in mounting, compatibility with SDMT 09T3 indexable inserts and efficient three-edge engagement for consistent milling results. Order the component directly via Metav Werkzeuge or request advice from our consultants for application-specific selection. VT241TM screw-in cutter for SDMT 09T3 indexable inserts – Ø35 mm, M16 thread (Teknik Makina) A compact VT241TM screw-in cutter designed for straightforward attachment and machining with SDMT 09T3 indexable inserts, suitable for precision-facing and light to medium milling operations. Compact Ø35 mm diameter Secure M16 screw-in mounting Three cutting edges for stable engagement Compatible with ZCC SDMT 09T3 inserts Reliable mounting for repeatable machining accuracy The screw-in design with an M16 mounting provides a positive, concentric connection that reduces run-out and contributes to reproducible results in production runs. With a threaded engagement height of 29 mm the holder achieves solid axial support, which helps maintain a consistent cutting geometry during interrupted cuts. This mechanical stability translates into predictable tool behaviour and reduced rework rates. Stable cutting performance with optimised engagement Equipped with three cutting edges, the tool body offers balanced cutting forces and a smooth chip load, which lowers vibration and helps to protect both the insert and machine spindle. The Ø35 mm diameter and a cutting height of 40 mm support reliable engagement depth without compromising rigidity. These characteristics improve surface finish and extend the effective life of indexable inserts when set up within recommended parameters. Fast insert changes and service-friendly design Insert retention uses a Torx M3.5x8.5 screw secured with a T15 key, enabling quick, repeatable insert changes and minimising downtime on the shop floor. Compatibility with ZCC-manufactured SDMT 09T3 indexable inserts ensures access to a broad range of grades for varied materials and cutting conditions. The configuration simplifies logistics and reduces the need for multiple specialised holders. Compact form and easy integration into tooling systems With a total length of 69 mm and a net weight of 0.231 kg, the component is compact enough for tight setups while retaining sufficient mass for stable cutting. Its dimensions favour versatile placement in modular tool systems and make it suitable for retrofitting existing toolholders where a screw-in solution is required. The result is an efficient, space-saving option that supports consistent production flow. For precision attachment with Teknik Makina components, contact Metav Werkzeuge in Emmerich for specification support or to place an order: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data SKU: VT241TM Manufacturer: Teknik Makina Article: Screw-in cutter for SDMT 09T3 indexable inserts Facts Diameter: 35 mm Thread: M16 Total length: 69 mm Thread engagement height: 29 mm Cutting height: 40 mm Cutting edges: 3 Weight: 0.231 kg Torx screw: M3.5x8.5 Torx key: T15 Compatible inserts: SDMT 09T3 Compatible insert manufacturer: ZCC eCl@ss: 21180806 ETIM: EC011860 Compatibility & Features Indexable insert system: SDMT 09T3 Insert manufacturer compatibility: ZCC Quick-change Torx screw fixation Screw-in mounting for minimal run-out FAQ What type of inserts fit this cutter? The VT241TM is designed for SDMT 09T3 indexable inserts and is compatible with inserts from ZCC. Which mounting thread is required for installation? Installation requires an M16 screw-in seat; the VT241TM features a 29 mm thread engagement for a secure fit. How are the inserts secured in place? Inserts are clamped with a Torx M3.5x8.5 screw; a T15 key is used for tightening and replacement. Is the cutter suitable for heavy roughing operations? The VT241TM is optimised for stable light to medium milling engagements; for heavy roughing, consider holders and insert grades specified for higher radial and axial loads. What are the key dimensions to check for machine integration? Relevant dimensions include the Ø35 mm body diameter, 69 mm total length and the M16 screw-in mounting interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Face Mill for SDMT 09T3 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Take advantage of the robust combination of precise clamping, reliable internal coolant and wide compatibility with SDMT 09T3 indexable inserts to maintain steady chip control and minimise changeover time. Order directly via Metav Werkzeuge or contact our consultants for integration advice and supply. Screw-in Cutter VT241-1TM (35 mm) for SDMT 09T3 Indexable Inserts by Teknik Makina A screw-in cutter VT241-1TM designed for indexable-insert milling applications, providing internal coolant delivery and a secure M16 threaded connection for production environments. 35 mm diameter for stable cutting Internal coolant for effective chip evacuation M16 screw-in connection Compatible with SDMT 09T3 inserts (ZCC) High stock removal with measured stability The cutter offers a 35 mm diameter and three cutting edges, delivering a balanced load per tooth that supports continuous material removal with reduced vibration. The 69 mm overall length and 40 mm cutting-edge height are matched to typical insert seat depths, which helps to maintain concentricity and improve surface finish. As a threaded-in tool, this design minimises radial runout and provides predictable tool life, which supports process planning in batch and serial production. Coolant-fed chip control for better surface quality Equipped with internal coolant, the tool channels cutting fluid directly to the cutting zone to improve chip evacuation and temperature control. That direct coolant feed reduces built-up edge and helps preserve insert geometry, resulting in more consistent finishes and fewer secondary operations. In practical terms, the coolant feature contributes to longer insert life and fewer unscheduled interruptions, translating into measurable gains in machining efficiency. Secure clamping and fast insert servicing The M16 screw-in connection ensures a robust mechanical joint for high-stability milling, while the kit’s fastening system uses a Torx T15 interface and M3.5x8.5 Torx screw for repeatable insert retention. The lightweight body (approx. 0.231 kg) reduces spindle load during rapid traverses and simplifies handling during tool changes. The clear serviceability of the assembly lowers maintenance time and reduces the risk of assembly errors on the shop floor. Seamless compatibility with common inserts and tooling systems This cutter is engineered to accept SDMT 09T3 indexable inserts and is specified as compatible with ZCC insert supplies, enabling straightforward retrofit into existing tool inventories. The combination of a standard screw-in interface and widely used insert geometry permits quick integration into established tooling systems, supporting supply-chain flexibility and minimising downtime when replacing worn heads. The VT241-1TM from Teknik Makina therefore suits workshops seeking dependable, easy-to-service insert milling options. For detailed integration advice on the Teknik Makina VT241-1TM screw-in cutter, or to arrange supply directly from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert assistance. Technical data SKU: VT241-1TM Product type: Screw-in cutter Brand: Teknik Makina Dimensions & core data Diameter: 35 mm Overall length: 69 mm Cutting-edge height: 40 mm Thread height: 29 mm Thread: M16 Weight: 0.231 kg Number of cutting edges: 3 Torx screw: M3.5x8.5 Torx key: T15 Materials & special features Inner coolant: yes Compatible with SDMT 09T3 indexable inserts Compatible insert manufacturer: ZCC Manufacturer: Teknik Makina SKU reference: VT241-1TM FAQ Is this cutter compatible with SDMT 09T3 inserts? Yes. The VT241-1TM screw-in cutter is designed for SDMT 09T3 indexable inserts and is specified as compatible with ZCC inserts. Does the tool provide internal coolant? Internal coolant is integrated into the VT241-1TM, supplying cutting fluid directly to the cutting zone to assist chip evacuation and thermal control. What fastening hardware is required for insert changes? Insert retention for this screw-in cutter uses a Torx T15 key and an M3.5x8.5 Torx screw, allowing repeatable securing of the SDMT 09T3 inserts. What are the key dimensions to check for fixture compatibility? Critical dimensions include the 35 mm cutter diameter, 69 mm overall length and M16 threaded connection; these determine spindle and holder compatibility for the VT241-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Milling Cutter for APMT 0903 Indexable Inserts Internal Coolant, 5 Teeth, M16 Thread - Teknik Makina
Achieve consistent, coolant-assisted milling with a compact screw-in design: the combination of internal coolant, a 35 mm diameter and secure M16 screw-in mounting ensures stable cutting performance and reduced tool wear. Order the screw-in milling cutter directly via Metav Werkzeuge or ask our consultants for detailed application advice. Screw-in milling cutter VT228-1TM – 35 mm diameter, internal coolant (Teknik Makina) The screw-in milling cutter VT228-1TM is a compact, coolant-fed holder engineered for use with APMT 0903 indexable inserts, designed to deliver repeatable, production-ready milling results in machining centres. 35 mm diameter with internal coolant M16 thread for secure mounting Compatible with APMT 0903 indexable inserts Torx T8 screw system for assembly Coolant-assisted design for longer tool life and consistent chips The holder’s internal coolant channel directs cutting fluid close to the insert nose, improving chip evacuation and reducing thermal load on the cutting edge. This arrangement helps maintain cutting-edge geometry for longer periods, which translates into fewer tool changes and more stable cycle times. Using indexable inserts allows quick restoration of cutting performance: worn inserts can be replaced in minutes, limiting downtime and keeping throughput high. For production environments that demand repeatability, the coolant-fed configuration supports continuous machining with less manual intervention. Secure screw-in connection for precise, repeatable mounting Engineered around an M16 thread and a compact overall length, the screw-in configuration provides a firm, vibration-resistant interface with the toolholder. Key dimensions such as 35 mm diameter, overall length 65.3 mm, and a thread engagement height of 25.3 mm contribute to a low-runout mounting that benefits surface finish and tool life. The tool’s fastening system uses a Torx T8 key and an M2,5x5,5 Torx screw for reliable clamping of the cutting head, enabling safe torque application and quick serviceability without specialised equipment. Compatibility and practical handling for workshop efficiency Designed specifically for APMT 0903 indexable inserts and compatible with inserts from Korloy, this screw-in cutter suits shops that standardise on insertised tooling for flexibility and cost control. With five cutting edges and a cutting height of 40 mm, the holder supports a range of milling tasks where insert geometry and grade determine the specific application. The compact mass (approx. 0.261 kg) and standardised interface make it straightforward to integrate into existing tool inventories, while the internal coolant provision supports higher stability in continuous operations. For coolant-fed milling from Teknik Makina, contact Metav Werkzeuge for availability and application matching — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical details and delivery options Technical Data SKU: VT228-1TM Product type: Screw-in milling cutter For inserts: APMT 0903 indexable inserts Compatible inserts manufacturer: Korloy Manufacturer: Teknik Makina Internal coolant: yes Core specifications Diameter: 35 mm Overall length: 65.3 mm Thread: M16 Thread engagement height: 25.3 mm Cutting height: 40 mm Number of cutting edges: 5 Weight: 0.261 kg Special features Internal coolant channel Torx key: T8 Torx screw: M2,5x5,5 Compact screw-in design for secure mounting Intended for APMT 0903 insert family FAQ Which inserts fit this holder? The VT228-1TM is designed for APMT 0903 indexable inserts and is compatible with Korloy inserts of that specification. Does the cutter provide internal coolant? Yes, the screw-in milling cutter features internal coolant for directed fluid flow to the cutting zone. What is the thread and mounting type? Mounting is by M16 screw-in thread with a thread engagement height of 25.3 mm. How many cutting edges does the assembly use? The cutting head is configured with five cutting edges, offering a balance between material removal and insert life. Which tool is needed to secure the insert head? Assembly and maintenance use a Torx T8 key and an M2,5x5,5 Torx screw for reliable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Milling Cutter for EPMT 0603 Indexable Inserts with Internal Cooling, M16 Thread - Teknik Makina
A compact milling head that combines high metal-removal rates, precise seating and internal coolant for longer insert life; ideal for batch production and repairs. Benefit from a robust M16 interface, five cutting edges and compatibility with EPMT 0603 indexable inserts — order directly via Metav Werkzeuge or consult our specialists for integration guidance. Screw-in cutter VT234-1TM — 35 mm diameter, internal coolant (Teknik Makina) Screw-in cutter VT234-1TM designed as a modular milling head for indexable-insert operations, optimised for medium-duty face and peripheral milling in workshop and production environments 35 mm cutting diameter Internal coolant supply Compatible with EPMT 0603 inserts M16 screw-in interface Faster cycle times through concentrated cutting power The VT234-1TM delivers consistent material removal thanks to its 35 mm diameter and five precisely formed cutting edges. This geometry reduces the number of passes required on common operations, improving throughput on short and medium-length runs. The combination of a compact head and concentrated cutting geometry helps maintain stable chip evacuation and predictable tool life, which in turn reduces unplanned stoppages and keeps production schedules reliable. Secure mounting and simple serviceability for less downtime A robust M16 screw-in thread and defined thread height ensure a repeatable, vibration-resistant connection to the tooling system. The tool features a standard T8 Torx key interface and a secured Torx screw (M2.5×5.5) that allows quick head servicing and insert changes with common workshop tools. This design minimises setup time and ensures the cutter returns to concentricity after reassembly, supporting stable cutting forces and extended insert life. Internal coolant for improved insert performance and surface finish Integrated internal coolant targets the cutting zone directly, lowering temperatures and flushing chips away from the insert pocket. By reducing thermal loads, insert wear is slowed and surface finish is elevated, particularly on continuous cuts. The internal feed is especially beneficial when machining steel and alloyed materials, where heat control translates to better tolerances and fewer secondary operations. Broad compatibility to support flexible tooling strategies The milling head accepts EPMT 0603 indexable inserts and is specified as compatible with inserts from Hitachi, enabling stock standardisation across existing toolsets. With five cutting edges and a clearly defined cutting-edge height, the head suits a variety of milling tasks in general workshop environments and smaller production cells where flexibility and part turnaround are important. Select the Teknik Makina VT234-1TM for efficient, reliable indexable milling and contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply Technical data SKU: VT234-1TM Manufacturer: Teknik Makina E-class: 21180806 Core dimensions Diameter: 35 mm Overall length: 60 mm Thread: M16 Thread height: 34.7 mm Cutting edges: 5 Cutting-edge height: 25.3 mm Weight: 0.224 kg Special features Internal coolant: yes Compatible inserts: EPMT 0603 indexable inserts Compatible insert manufacturer: Hitachi Torx key: T8 Torx screw: M2.5x5.5 FAQ What insert type does this cutter accept? The cutter accepts EPMT 0603 indexable inserts; compatibility with Hitachi inserts is specified for this VT234-1TM milling head. Is the tool suitable for coolant-through operation? Yes, the head is equipped with internal coolant to supply the cutting zone directly, improving insert life and surface finish. How is the cutter secured to the holder? The tool uses an M16 screw-in interface with a defined thread height to ensure repeatable, vibration-resistant mounting. How many cutting edges are available and what is their height? The cutter is fitted with five cutting edges; the cutting-edge height is 25.3 mm, which helps determine engagement and feed parameters. Which key and screw are required for insert changes? Insert retention uses a Torx screw M2.5x5.5 and a T8 Torx key for safe and straightforward insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Maximise reach and flexibility with screw-in cutters
Screw-in cutters, also known as modular screw-in milling heads or threaded cutter heads, are modular milling tools with a threaded rear that are screwed into extensions or basic toolholders. They allow the tool overhang to be adapted precisely to the depth of the machining area, providing the reach and adaptability required for complex tool and mould work.
Why these modular heads are essential in deep machining
Screw-in cutters are designed so that only the front milling head needs replacing when worn, while the carrier assemblies and extensions remain in service — a setup that reduces tooling costs and simplifies logistics in production environments. Versions without internal coolant rely on external nozzles to feed coolant to the cutting zone, which is adequate for shallow, easily accessible operations but becomes ineffective for deep contours. For deep internal work the industrial standard is screw-in cutters with internal coolant: inner channels run through the connection thread right to the cutting edges, ensuring centred coolant delivery, reliable chip transport and effective heat control.
- the internal coolant supply generates the high flushing pressure necessary to evacuate chips against gravity from narrow cavities
- thermal load on the concealed cutting zone is reduced, lowering the risk of thermal damage and deformation
- improved chip evacuation prevents spalling and vibration, dramatically reducing the likelihood of tool breakage during extended overhangs
Practical benefits that improve throughput and cost-efficiency
- replaceable milling heads cut tooling expenditure and inventory complexity
- modular carrier systems and extensions reduce retooling and shorten changeover times
- reliable chip evacuation and cooling increase tool life and process stability
- consistent performance for deep cavities minimises scrap and rework
Metav as your precision partner for modular tooling
As a specialist partner, Metav brings decades of expertise and a broad offering that suits industry and workshops alike. With over 48,000 customers and a catalogue spanning more than 250,000 products, Metav combines a pragmatic supply chain from Emmerich with technical competence that helps engineers specify the right screw-in cutters and supporting extensions. If you need advice on selecting a modular screw-in milling head or determining the correct internal coolant routing for a cavity, our technical team can advise on specifications and compatibility.
In short: screw-in cutters provide modular reach, cost-effective head replacement and indispensable internal coolant performance for deep, confined machining.
FAQ
What is the difference between screw-in cutters with internal coolant and those without?
Screw-in cutters with internal coolant feature internal channels that feed coolant directly to the cutting edges via the connection thread, providing the flushing pressure required to evacuate chips from deep cavities; cutters without internal coolant rely on external nozzles and are suitable only for shallow, easily accessible operations.
How do modular screw-in milling heads reduce tooling costs?
Because the design allows only the worn front milling head to be replaced while the carrier and extensions remain in use, modular screw-in milling heads lower component consumption and simplify inventory management, leading to clear cost savings over time.
Which machining scenarios require threaded cutter heads with internal coolant?
Threaded cutter heads with internal coolant are essential when machining deep bores, cavities or internal contours where chips must be transported out against gravity and where external coolant cannot reach the cutting zone reliably.
Can long extensions be used with screw-in cutters without compromising chip evacuation?
Long extensions are feasible, but reliable chip evacuation under long overhangs depends on internal coolant delivery; without it, external coolant will often be blocked by deep part walls and chip clogging becomes a significant risk.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com