Modular screw-in cutters for adaptable deep machining
Screw-in cutters are modular milling tools designed to be screwed into extensions or toolholders to adjust overhang for deep or recessed machining and to make tool systems more economical by allowing only the front milling head to be replaced; they are indispensable in tool and mould making for such reasons. Where machining requires coolant delivered through the tool, internal cooling provides continuous, directed supply through channels to the cutting edges, whereas designs without internal cooling rely on external nozzles and suit only very shallow, easily accessible operations. For deep cavities and long extensions, the combination of long extensions and internal coolant ensures high flush pressure to evacuate chips against gravity, reduce thermal load and prevent chip clogging and vibration. Key advantages include improved tool longevity, higher process reliability and easier tool maintenance, with the primary use being precision metalworking and cavity finishing.
35mm Screw-In Milling Cutter for LOGU 0303 Indexable Inserts L65mm, M16 Thread - Teknik Makina
Benefit from a compact, high‑compatibility tool that balances precision and uptime: the 35 mm screw‑in cutter delivers a secure M16 screw connection and rapid insert changes for steady production—order the (VT318TM screw‑in cutter) directly via (Metav Werkzeuge) or ask our consultants if needed. Screw‑in cutter VT318TM – for LOGU 0303 Indexable Inserts, M16 thread (Teknik Makina) A Screw‑in cutter VT318TM engineered for milling operations with LOGU 0303 indexable inserts, offering a 35 mm diameter and a compact 65 mm overall length 35 mm cutting diameter Compatible with LOGU 0303 inserts M16 screw‑in thread, L65 mm overall length Five cutting edges, 40 mm cutting height High compatibility that reduces tool change downtime The cutter is built around compatibility with the LOGU 0303 system and Kyocera insert standards, which streamlines procurement and storekeeping in production environments. With a 35 mm cutting diameter and an indexable insert concept, the tool allows quick insert replacement rather than full‑body tool changes, resulting in shorter stoppages and more predictable scheduling. This approach supports continuous machining processes and reduces the variety of spare parts required on the shop floor. Secure mounting and balanced cutting for consistent results A robust M16 screw‑in connection combined with a compact 65 mm overall length gives a rigid interface for the spindle, improving stability during heavy cuts. The head features five cutting edges and a 40 mm cutting height, which spread cutting forces and support even wear across the inserts; the measured mass of 0.23 kg contributes to low inertia for rapid tool changes. Insert fastening uses a Torx T8 key and M3x7 Torx screw, ensuring repeatable clamping torque and safe seating of the indexable inserts for reliable machining runs. Designed for efficient workflows in modern workshops The design emphasises throughput and cost efficiency: standardised inserts and a screw‑in mounting reduce downtime and simplify maintenance intervals. The geometry of the head and the insert system support good chip control and surface finish, while the compact form factor helps with clearance in multi‑axis setups. As a practical option from Teknik Makina, the VT318TM aligns with lean toolroom strategies by lowering inventory complexity and enabling fast, predictable insert swaps to keep production moving. For procurement or detailed application advice on the VT318TM from Teknik Makina, contact Metav Werkzeuge for ordering and technical consultation Technical Data SKU: VT318TM Label: 35mm Einschraubfräser LOGU 0303 L65mm Product type: Einschraubfräser / Screw‑in cutter Manufacturer: Teknik Makina Category path: Zerspanen > Einschraubfräser Facts Diameter: 35 mm Overall length: 65 mm Thread height: 25 mm Weight: 0.23 kg Thread: M16 Cutting edges: 5 Cutting height: 40 mm Special features For LOGU 0303 indexable inserts Compatible with Kyocera inserts Torx key: T8 Torx screw: M3x7 ECLASS: 21180806 FAQ What insert system does this cutter use? The VT318TM cutter is configured for the LOGU 0303 indexable insert system and is compatible with Kyocera‑standard inserts. Which thread is required for mounting this tool? The tool uses an M16 screw‑in thread and a 25 mm thread height for secure clamping in the spindle. How many cutting edges are available and what is the cutting height? This cutter head features five cutting edges with a cutting height of 40 mm, designed for balanced wear and consistent machining. What tools are needed to change the inserts? Insert fastening requires a Torx T8 key and an M3x7 Torx screw for secure, repeatable clamping of the indexable inserts. Is the VT318TM suitable for tight‑space setups? The compact 65 mm overall length and reduced mass make the VT318TM suitable for multi‑axis and constrained clearance applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Screw-In Milling Cutter For RDMT 12T3 Indexable Inserts, 3 Cutting Edges, M16 Thread - Teknik Makina
Take advantage of a compact, rigid toolholder that combines secure M16 mounting with compatibility for RDMT 12T3 indexable inserts to keep machining stable and repeatable; order via Metav Werkzeuge or request tailored advice from our specialists for seamless integration into production. Screw-in milling cutter VT126TM by Teknik Makina — Ø35 mm, M16 thread, for RDMT 12T3 indexable inserts The screw-in milling cutter VT126TM is a precision screw-in milling head designed for use with RDMT 12T3 indexable inserts in medium‑duty milling applications. Screw-in design with M16 thread Compatible with RDMT 12T3 inserts Three cutting edges for stability Torx T15 clamp and M3.5 locking screw Stable mounting for repeatable machining A robust connection is the basis for consistent results: the M16 thread and 24.5 mm thread engagement provide firm seating in the spindle or arbor, reducing micro‑movement and runout during cutting. With an overall length of 60 mm and a body diameter of Ø35 mm, the holder balances rigidity and compactness to limit deflection under load. The modest mass of 0.196 kg lowers centrifugal and spindle loads, which contributes to prolonged tool life and predictable dimensional accuracy. Such mechanical stability translates directly into fewer rework cycles and steadier surface finishes on components. Optimised insert clamping and controlled chip removal The cutter accepts RDMT 12T3 indexable inserts, clamped securely by the supplied Torx screw assembly (M3.5x8.5) and tightened with a T15 key; a separate M3.5 locking screw adds secondary retention. The three cutting edges design delivers balanced cutting forces and smoother chip flow, while a cutting height of 35.5 mm provides sufficient engagement for shoulder and face milling tasks. For those less familiar: indexable inserts are replaceable cutting plates that can be rotated or exchanged when worn, offering rapid tool turnaround and consistent edge geometry without withdrawing the entire holder. Together, the clamping system and insert standard reduce downtime and simplify maintenance routines. Designed to integrate into workshop and production workflows The unit’s straightforward architecture supports fast setup and predictable repeatability in batch production or jobbing environments. Compatibility with the common RDMT 12T3 insert family ensures broad applicability across steels and non‑ferrous materials when paired with the appropriate insert grade. The Torx fastener system allows repeatable torque application for consistent clamping force, which supports process stability and operator confidence. As a compact screw‑in solution from Teknik Makina, this component is particularly suited where changeover speed, toolholding reliability and straightforward spare‑parts handling are priorities. For secure mounting in repetitive milling operations, choose the Teknik Makina screw‑in milling cutter VT126TM and contact Metav Werkzeuge in Emmerich for technical advice or prompt delivery from local stock via eMail info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: VT126TM Manufacturer: Teknik Makina Diameter: 35 mm Thread: M16 Overall length: 60 mm Thread engagement height: 24.5 mm Cutting height: 35.5 mm Number of cutting edges: 3 Weight: 0.196 kg Features Compatible with RDMT 12T3 indexable inserts Torx screw M3.5x8.5 for insert clamping Locking screw M3.5 Torx key size T15 Compact screw‑in holder design FAQ What inserts fit this screw‑in milling cutter? The VT126TM is specified for RDMT 12T3 indexable inserts; matching the correct insert grade to the workpiece material ensures optimal performance. How is the insert secured in the cutter head? Insert clamping is achieved via a Torx screw (M3.5x8.5) tightened with a T15 key, supplemented by an M3.5 locking screw for additional retention. Is the thread suitable for standard arbors? The holder uses an M16 screw‑in connection; compatibility with a machine arbor should be confirmed against the arbor’s thread and mounting specifications. What advantages do three cutting edges offer? A three‑edge configuration balances cutting forces, improves stability and helps maintain a consistent surface finish while supporting efficient chip evacuation. Can the VT126TM reduce spindle load compared with larger holders? Yes—the compact form and moderate mass (0.196 kg) lower centrifugal effects and can reduce spindle stress compared with bulkier toolholders, benefiting dynamic balance. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Screw-On Cutter For BLMP 0904 Indexable Inserts With Internal Cooling, 65mm Overall Length - Teknik Makina
Take advantage of the combination of robust mounting, internal coolant, and high material removal rate for predictable milling cycles. The secure screw-in interface and compatibility with BLMP 0904 indexable inserts ensure repeatable results and reduced tool-change times. Order the VT267-1TM directly via Metav Werkzeuge or ask our consultants if needed. VT267-1TM 35 mm screw-in cutter — internal coolant, for BLMP 0904 inserts (Teknik Makina) VT267-1TM is a screw-in cutter designed for high-performance milling with BLMP 0904 indexable inserts, offering internal coolant and a compact L65 profile. *35 mm cutting diameter *Internal coolant for chip control *Compatible with BLMP 0904 (Taegutec) *Four cutting edges for productive milling Faster material removal with stable cutting geometry The tool’s 35 mm cutting diameter paired with four cutting edges delivers a high material removal rate while maintaining stable cutting forces. Multiple effective edges distribute wear, which extends insert life and reduces replacement frequency. For operations where cycle time and tool longevity matter, the combination of diameter and flute count provides a measurable productivity gain and more consistent surface finish compared with single-edged solutions. Secure screw-in interface for repeatable setups A robust screw-in connection with M16 thread and a thread height of 25 mm ensures axial and radial rigidity at the holder interface. The clamping uses a Torx T10 key and retention screw M3.5x8.5, enabling secure and repeatable mounting of the cutting head. This precision interface lowers vibration and runout, improving dimensional accuracy and reducing the need for rework in series production or demanding workshop environments. Coolant-through design improves tool life and surface quality The through-tool internal coolant channel directs cutting fluid close to the cutting edge, enhancing cooling and chip evacuation where heat and chips concentrate. This reduces thermal load on the insert and helps avoid built-up edge formation, which in turn supports longer insert life and steadier performance over long passes. For wet machining strategies that depend on controlled chip flow and consistent temperatures, internal coolant is a clear technical advantage. Workshop compatibility and practical dimensions With an overall length of 65 mm and a tool weight of 0.235 kg, the VT267-1TM suits compact toolholder assemblies and minimizes overhang-related deflection. It is specified for BLMP 0904 indexable inserts and is compatible with inserts from Taegutec, simplifying parts procurement and stock management. The design supports efficient changeover routines and reduces the range of spare parts required for mixed-machine environments. For reliable high-performance milling with a secure screw-in interface, contact Metav Werkzeuge to specify VT267-1TM for production or workshop use — Metav’s technical consultants can advise on toolholder pairing and insert selection Technical data SKU: VT267-1TM Diameter: 35 mm Overall length: 65 mm Core specifications Cutting edges: 4 Cutting height: 40 mm Thread height: 25 mm Thread: M16 Weight: 0.235 kg Features & compatibility Internal coolant: yes Compatible inserts: BLMP 0904 (Taegutec) Torx key: T10 Retention screw: M3.5x8.5 Manufacturer: Teknik Makina FAQ Which inserts fit this screw-in cutter? This cutter accepts BLMP 0904 indexable inserts and is compatible with inserts from Taegutec, allowing straightforward replacement and stocking of common insert geometries. Is the cutter suitable for wet machining? Yes — the through-tool internal coolant channel supplies fluid directly to the cutting zone to aid cooling and chip evacuation during wet machining. What fastening hardware is required for mounting? Mounting requires the retention screw M3.5x8.5 and a Torx T10 key; the tool engages with an M16 screw-in interface with a 25 mm thread height for stable clamping. How does the cutter reduce tooling costs in production? The combination of four cutting edges and internal coolant helps extend insert life and lowers changeover frequency, which reduces overall tooling consumption across production runs. What are the main dimensional constraints to check before ordering? Confirm a compatible M16 screw-in holder and sufficient clearance for a 65 mm overall length and 35 mm cutting diameter to ensure correct fit-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Line Boring Screw-In Cutter for SDMT 09T3 Indexable Inserts, M16 Thread, 3 Cutting Edges - Teknik Makina
Benefit from a robust M16 screw connection, Ø40 mm cutting diameter and a three-edge cutter geometry for steady metal removal and reduced setup time; order directly via Metav Werkzeuge or consult the specialists for detailed application advice. Screw-in milling cutter VT242TM – Ø40 mm, M16 thread (Teknik Cutting Tools) The Screw-in milling cutter VT242TM is a screw-in cutter designed for use with SDMT 09T3 indexable inserts, delivering secure mounting and straightforward insert changes for workshop and light industrial milling tasks. Ø40 mm cutting diameter M16 screw connection Compatible with SDMT 09T3 inserts by ZCC Torx fastening M3.5x8.5, key T15 Secure mounting that keeps production running The M16 screw connection and 29 mm thread depth provide a mechanically robust interface that reduces runout and vibration during operation. With the Torx M3.5x8.5 fastening and a T15 key, clamp force is consistent and repeatable, which lowers the frequency of re-adjustments and shortens setup times. This mechanically sound design translates into more predictable machining results and fewer rejects when batches are repeated. The screw-in format also supports quick replacement of damaged holders without the need for complex fixturing. Insert compatibility engineered for consistent cutting Designed specifically for SDMT 09T3 indexable inserts, the tool accepts inserts from ZCC, ensuring a wide availability of cutting grades and geometries. The three-edge configuration offers balanced cutting forces and steady chip formation, while the 40 mm cutting height allows for effective engagement on a variety of workpiece profiles. Explaining the term: indexable inserts are replaceable carbide or coated cutting tips; using them minimises tooling costs because only the insert is exchanged when worn, not the entire tool body. Dimensions that favour rigidity and access With an Ø40 mm diameter and 69 mm overall length, the holder presents a compact yet stiff solution that resists deflection under load. The moderate mass of 0.253 kg contributes to reduced spindle imbalance and helps maintain surface finish quality at higher spindle speeds. These dimensions make the tool suitable for operations where accessibility in tight spaces matters, while still providing the necessary contact area to dissipate cutting forces effectively. The design therefore supports both productivity and component integrity. Practical features for efficient workshop routines The screw-in format and the clearly specified fastener (Torx M3.5x8.5) mean routine maintenance and insert changes are straightforward, helping to keep machine downtime to a minimum. The tool’s compatibility with standard SDMT 09T3 inserts enables quick sourcing of cutting grades for aluminium, steel or harder materials where appropriate grades are selected. Given the straightforward mechanical interface and commonly available Torx key size, inventory management is simplified and repair cycles are quicker, which supports steady throughput in a production setting. For assured compatibility with SDMT 09T3 indexable inserts and to discuss specification or ordering, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT242TM Manufacturer: Teknik Makina Product: Screw-in milling cutter for SDMT 09T3 indexable inserts SKU: VT242TM Facts Diameter: 40 mm Overall length: 69 mm Cutting height: 40 mm Thread: M16 Thread depth: 29 mm Number of cutting edges: 3 Weight: 0.253 kg Special features Compatible inserts: SDMT 09T3 Compatible insert manufacturer: ZCC Torx screw: M3.5x8.5 Torx key: T15 Screw-in design Indexable inserts application FAQ Is the tool compatible with SDMT 09T3 inserts? Yes. The screw-in milling cutter VT242TM is designed specifically for SDMT 09T3 indexable inserts and accepts grades supplied by ZCC. What fastening is required for mounting the holder? The holder uses a Torx fastening M3.5x8.5 secured with a T15 key for consistent clamp force. What are the main dimensions to consider for machine setup? Key dimensions are a Ø40 mm cutting diameter and a 69 mm overall length; the thread is M16 with a 29 mm thread depth. How many cutting edges does the tool provide and what is the benefit? The tool features three cutting edges; this geometry balances cutting forces and supports steady chip evacuation for improved surface finish. Can the holder be used for different insert grades? Yes. The holder’s acceptance of SDMT 09T3 inserts allows selection of different grades for specific materials or cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Modular End Mill for Korloy APKT 1604 inserts - Teknik Makina
Specifications: Order Number: VT168TM Item: Modular End Mill usable with APKT 1604 Indexable Inserts of Korloy Brand: Teknik Makina Quantitative Specifications: Diameter: 40mm Cutting Edges: 4 Weight: 0.238kg Total length: 60mm Cutting Height: 35.5mm Thread: M16 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
40mm Screw-In Cutter for APMT 0903 Indexable Inserts 6-Flute Internal Coolant, M16 - Teknik Makina
Take advantage of the combination of internal coolant, 40 mm diameter and a secure M16 screw-in connection for stable, repeatable machining results; order directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in milling cutter VT229-1TM – 40 mm diameter with internal coolant (Teknik Makina) The Screw-in milling cutter VT229-1TM is engineered for use with APMT 0903 indexable inserts, delivering coolant-fed chip control and robust mechanical stability for demanding finishing and semi-finishing operations. 40 mm diameter for stable cutting Internal coolant for improved chip evacuation Six cutting edges for even load distribution M16 screw-in connection for secure mounting Greater process reliability through stable geometry The combination of a 40 mm diameter body and six cutting edges provides a well-balanced cutter that minimises vibration and ensures consistent surface quality. The geometry supports even load distribution across the insert pockets, which reduces chatter and extends the effective life of indexable inserts. In practical terms, this stability translates into fewer rejects and more predictable cycle times on serial parts, improving overall process reliability in CNC milling applications. Improved cooling and chip management for longer tool life This tool features internal coolant, routed directly to the cutting zone to support controlled chip formation and quicker heat dissipation. Direct coolant supply helps prevent built-up edge and reduces thermal softening of the insert, which in turn maintains cutting performance across longer production runs. For operators transitioning from external coolant setups, the internal feed simplifies fixturing and reduces the need for high-pressure external nozzles while enhancing the consistency of chip evacuation. Secure assembly and quick serviceability on the shop floor A robust M16 screw-in connection ensures the cutter seats reliably in standard holders, making clamping repeatable and simple. The cutter uses a Torx screw (M2.5x5.5) tightened with a T8 key for insert retention, enabling rapid insert changes and low maintenance downtime. With a total length of 65.3 mm and a cutting length of 40 mm, the tool is suitable for a range of workpieces where compact reach and rigid support are required. The design is compatible with APMT 0903 indexable inserts from Korloy, offering flexibility in insert grades for different materials and cutting conditions. Practical benefits for procurement and production planning Suppliers and production engineers will appreciate the straightforward interface: standard mounting thread, common insert family and coolant integration reduce the number of variants to stock while supporting reliable tool performance. The cutter’s moderate mass (0.299 kg) keeps dynamic loads low, aiding machine life and lowering spindle wear risk. Choosing this type of screw-in cutter helps streamline tool management and supports predictable maintenance intervals, a decisive factor for continuous manufacturing environments. Contact Metav Werkzeuge for availability and tailored application recommendations — Metav Werkzeuge in Emmerich provides direct supply and expert advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VT229-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Key dimensions Diameter: 40 mm Total length: 65.3 mm Cutting length: 40 mm Thread / connection: M16 Weight: 0.299 kg Cutting edges: 6 Special features Internal coolant: yes Compatible inserts: APMT 0903 (Korloy) Torx screw: M2.5x5.5 with T8 key SKU: VT229-1TM FAQ Which indexable inserts are compatible with this cutter? The VT229-1TM is designed for APMT 0903 indexable inserts and is specified to work with Korloy inserts in that family. Does the cutter support coolant supply? Yes, the cutter features internal coolant, which delivers fluid directly to the cutting zone for improved chip control and heat management. What is the connection type for mounting? Mounting is by an M16 screw-in connection, which provides a secure and repeatable seat in compatible holders. How many cutting edges does the tool have and what is the cutting length? The tool has six cutting edges and a cutting length of 40 mm, suitable for finishing and semi-finishing passes where stability is important. Which tools are required for insert replacement and maintenance? Insert retention uses a Torx screw (M2.5x5.5) tightened with a T8 key, enabling fast insert changes and straightforward maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Cutter for BLMP 0603 Indexable Inserts, 2 Flutes M16 Thread 25mm Cutting Height, 100° Cutting Angle - Teknik Makina
Take advantage of a compact, precision thread-in milling holder that combines secure insert clamping and straightforward servicing to keep production moving; its M16 thread and compatibility with BLMP 0603 indexable inserts ensure reliable performance and easy tool changes — order directly via Metav Werkzeuge or consult our specialists for integration advice. VT195TM Screw-in milling cutter — 40 mm diameter, for BLMP 0603 indexable inserts (Teknik Makina) The VT195TM screw-in milling cutter is a compact, threaded milling holder designed for light-to-medium finishing and roughing operations where secure insert clamping and short overhang are required 40 mm diameter for robust cutting M16 threaded holder for secure mounting Compatible with BLMP 0603 indexable inserts Torx M3x6.5 screw with T8 key for fast changes Secure insert clamping reduces downtime and rejects A thread-in holder with a robust M16 thread and precise insert seat offers consistent repeatability and low runout. The combination of a dedicated clamping screw (Torx M3x6.5) and the matching T8 key ensures that BLMP 0603 inserts are retained securely, reducing the risk of loosening under interrupted cuts. For production environments this means fewer stoppages for rework and a measurable improvement in machine uptime — a practical advantage for shops focused on reliable throughput. Geometry engineered for efficient material removal The tool’s 100° cutting angle and 2 cutting edges balance chip formation and surface finish, enabling efficient metal removal with predictable forces. The 40 mm diameter provides a stable contact radius that aids heat dissipation and reduces vibration in medium-duty milling tasks. In practice, the geometry translates into shorter cycle times for comparable operations and consistent surface quality, which supports tighter production schedules and reduces the need for additional finishing passes. Compact design for constrained tool stations With a 68 mm overall length, 25 mm thread height and 25 mm cutting height, the holder minimises overhang and helps maintain tool rigidity in confined setups. The lightweight construction (approx. 0.044 kg) eases handling during tool changes and lessens centrifugal load at higher spindle speeds. These dimensional advantages make the thread-in cutter well suited to multi-spindle heads or setups where tool-to-tool clearance is limited, providing a reliable option for retrofitting existing toolholders without major layout changes. Broad compatibility and practical workshop benefits Engineered for use with indexable inserts from leading suppliers, the holder accepts BLMP 0603 inserts and is listed as compatible with Taegutec grades, offering flexibility in grade and geometry selection to match specific materials and cutting conditions. The straightforward maintenance—single Torx screw removal for insert replacement—keeps servicing simple and rapid. Combined with Metav’s distribution and stock depth, the component is presented as a practical building block for workshops seeking dependable, easy-to-service tooling that integrates with established insert families. For tailored advice on integrating the Teknik Makina VT195TM screw-in milling cutter into existing setups and to arrange prompt supply through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — reliable delivery and application support from Emmerich are available. Technical data SKU: VT195TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter (threaded holder) Compatible inserts: BLMP 0603 (indexable inserts) Compatible insert manufacturer: Taegutec eClass: 21180806 ETIM: EC011860 Dimensions and numbers Diameter: 40 mm Overall length: 68 mm Thread: M16 Thread height: 25 mm Cutting height: 25 mm Number of cutting edges: 2 Cutting angle: 100° Weight: 0.044 kg Features and compatibility Torx screw: M3x6,5 Torx key size: T8 For BLMP 0603 indexable inserts Manufacturer: Teknik Makina Files (product documentation): referenced in system FAQ Which indexable inserts fit this holder? The holder accepts BLMP 0603 indexable inserts; insert geometry and size must match the BLMP 0603 seat to ensure correct clamping and cutting performance. Is the holder compatible with Taegutec inserts? Yes — the VT195TM is listed as compatible with Taegutec inserts of the BLMP 0603 designation, enabling selection of grades for specific materials. What screw and key are required for insert changes? Insert clamping uses a Torx M3x6.5 screw and the matching T8 Torx key for reliable and fast insert replacement. What are the key dimensions affecting rigidity? Relevant dimensions include the 40 mm diameter, 68 mm overall length and 25 mm thread height — these reduce overhang and support rigidity in compact setups. How many cutting edges does the tool provide and what is the cutting angle? The tool is configured with 2 cutting edges and a 100° cutting angle, balancing chip control and surface finish for many finishing and light roughing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Screw-In Cutter for EPMT 0603 Indexable Inserts 6 Teeth, M16 Thread, 25.3mm Cutting Height - Teknik Makina
Combine dependable mounting and wide insert compatibility for uninterrupted production: the screw-in milling cutter accepts EPMT 0603 indexable inserts, features a 40 mm cutting diameter and an M16 screw connection for secure clamping. Order the screw-in milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Einschraubfräser VT235TM — screw-in milling cutter, 40 mm diameter, M16 thread (Teknik Makina) The Einschraubfräser VT235TM is a screw-in milling cutter designed for use with EPMT 0603 indexable inserts and compatible with Hitachi insert systems, intended for industrial indexable-insert milling applications. 40 mm cutting diameter M16 screw-in connection 6 cutting edges for stable cutting Compatible with EPMT 0603 inserts (Hitachi) Reliable indexable-insert performance for demanding tasks The VT235TM offers a consistent package for indexable-insert milling: with a 40 mm diameter and 6 cutting edges, the tool provides a robust cutting front that helps maintain process stability under repetitive load. The 93° cutting angle defines the approach geometry and supports predictable chip formation; this reduces the risk of unexpected workpiece forces and extends Insert life. Compatibility with EPMT 0603 inserts ensures access to a wide range of grades and geometries, so machinists can select the optimum insert for steel, alloy or general-purpose applications without changing the holder. Secure mounting and service-friendly assembly Mechanical stability begins with the connection: the M16 thread secures the tool to the spindle or adapter while a thread height of 34.7 mm gives a reliable engagement length. The cutter’s overall length of 60 mm and modest mass of 0.256 kg balance rigidity with manageable handling during tool changes. The insert is fixed by a Torx screw M2.5x5.5 (Torx key T7), a commonly available fastener size that simplifies maintenance and shortens changeover times. A 25.3 mm cutting-height provides sufficient tool engagement for many indexable-insert set-ups while keeping insert clamping straightforward. Shop-floor integration and predictable tooling inventory Standardisation matters: using a holder that accepts EPMT 0603 inserts and is compatible with Hitachi systems reduces the number of spare insert types required in the tool crib. The compact dimensions and standard M16 thread allow straightforward integration with existing adapters and machine tool interfaces. For procurement and logistics, the tool’s technical specifications support transparent purchasing decisions and enable planners to match holder-to-insert combinations quickly, helping to reduce set-up time and increase machine uptime. Contact Metav Werkzeuge today for technical clarification on the Teknik Cutting Tools screw-in milling cutter VT235TM and to confirm stock availability and delivery from Emmerich. Technical Data Article number: VT235TM Name: Screw-in milling cutter for EPMT 0603 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 40 mm Overall length: 60 mm Thread: M16 Thread length: 34.7 mm Cutting height: 25.3 mm Cutting edges: 6 Cutting angle: 93° Weight: 0.256 kg Special features Compatible with EPMT 0603 inserts (Hitachi) Torx screw M2.5x5.5, Torx key T7 Designed for indexable-insert systems FAQ Which inserts does the cutter accept? The screw-in milling cutter VT235TM accepts EPMT 0603 indexable inserts and is compatible with Hitachi insert systems. What is the mounting thread and engagement length? The holder uses an M16 thread with a thread height of 34.7 mm, providing secure engagement for standard adapters. How many cutting edges does the tool have and what is the diameter? The tool has 6 cutting edges and a cutting diameter of 40 mm, offering a balance of metal removal and stability. What fastener is required to secure the insert? Insert clamping requires a Torx screw M2.5x5.5 and a Torx key T7 for assembly and replacement. What are the overall dimensions and weight for handling considerations? Overall length is 60 mm and the tool weight is 0.256 kg, supporting easy handling during tool changes and set-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Cutter for EPMT 0603 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Take advantage of the combination of stable mounting, efficient chip evacuation and quick indexable-insert changes for uninterrupted production. The screw-in milling cutter offers internal coolant and a robust M16 thread, ensuring consistent performance; order directly via Metav Werkzeuge or consult the technical team for configuration advice. Screw-in milling cutter VT235-1TM — Ø 40 mm, internal coolant, for EPMT 0603 indexable inserts (Teknik Makina) A robust screw-in milling cutter designed for secure mounting and efficient coolant delivery in medium-duty milling operations. Screw-in design for fast head changes Ø 40 mm body for stable cutting Internal coolant for improved tool life Compatible with EPMT 0603 Hitachi inserts Maximise productivity with fewer interruptions The screw-in milling cutter is built to reduce non-cutting time and extend insert life. With six cutting edges and compatibility with EPMT 0603 indexable inserts, the system enables multiple indexings before replacement, lowering per-part tooling costs. Integrated internal coolant directs lubricant and coolant to the cutting zone, which improves heat dissipation and chip evacuation; this leads to more consistent surface finishes and reduced downtime. The result is a measurable increase in throughput for repetitive milling tasks and serial production. Rigid mounting and straightforward maintenance A secure M16 thread and a compact 60 mm overall length create a rigid connection between cutter and holder, reducing chatter during interrupted cuts. The Ø 40 mm tool body provides a stable platform for radial engagement, while the 25.3 mm cutting-edge height supports substantial depth of cut where indexable inserts are used. The head is fastened with a Torx screw ( M2.5x5.5 ), operable with a T8 key, allowing quick insert changes and minimised machine downtime. This combination of mechanical integrity and serviceability supports repeatable process results on the shop floor. Compatibility and practical workshop benefits Designed by Teknik Makina and supplied as VT235-1TM, the cutter accepts EPMT 0603 inserts from Hitachi, simplifying procurement and inventory management when that insert family is standard in the toolroom. Weighing 0.256 kg, the unit is easy to handle during set-up yet robust in operation. The internal coolant channel supports through-cutter delivery, which is especially beneficial where chip control and edge cooling are critical. Overall, this tool body balances operational resilience with low-changeover effort, making it a pragmatic choice for production environments seeking consistent milling performance. For a tailored configuration or to purchase the Teknik Makina screw-in milling cutter VT235-1TM, contact Metav Werkzeuge in Emmerich for fast delivery and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT235-1TM Manufacturer: Teknik Makina Product type: screw-in milling cutter Label: 40mm screw-in milling cutter EPMT 0603 L60mm with internal coolant Facts Diameter: 40 mm Overall length: 60 mm Thread: M16 Thread height: 34.7 mm Cutting edges: 6 Cutting-edge height: 25.3 mm Weight: 0.256 kg Torx key: T8 Torx screw: M2.5x5.5 Internal coolant: yes Special features Compatibility: EPMT 0603 indexable inserts Compatible insert manufacturer: Hitachi Screw-in design for secure mounting Compact tool body for reduced overhang FAQ Which inserts fit this cutter? This cutter accepts EPMT 0603 indexable inserts; the tool body is compatible with inserts from Hitachi and configured for that insert family. How is coolant delivered to the cutting zone? Coolant is supplied through the cutter via internal coolant channels, directing fluid to the insert edge to improve cooling and chip evacuation. What fastening hardware is required for insert changes? Inserts are secured with a Torx screw M2.5x5.5; a T8 Torx key is used for removal and installation. What holder thread is required for mounting? The tool is designed for screw-in mounting with an M16 thread; a matching M16 screw-in holder is required for correct assembly. What is the product SKU for ordering or spare parts? The product is supplied as VT235-1TM, which should be referenced for ordering and when specifying compatible accessories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No: 9, Selcuklu/KONYA, TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Screw-In Cutter for LNMU 0303 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Combine a compact 40 mm diameter with internal coolant and secure M16 mounting to achieve consistent, efficient milling and reduced tool-change time; order the tool directly via Metav Werkzeuge or request compatibility advice from the consultants. Screw-in milling cutter 40 mm with internal coolant – Teknik Makina The screw-in milling cutter for LNMU 0303 indexable inserts is a coolant-fed, compact tool engineered for precision milling in CNC operations. 40 mm diameter for compact setups Internal coolant for efficient chip control M16 thread for secure mounting Compatible with LNMU 0303 indexable inserts Six cutting edges for economical indexing Coolant-fed design for consistent surface quality and extended tool life The built-in internal coolant channel delivers fluid directly to the cutting zone, improving chip evacuation and reducing edge temperature. This targeted cooling helps maintain cutting-edge geometry over longer cycles, resulting in steadier surface finish and fewer unplanned interventions. For production environments where process stability matters, the coolant-fed arrangement supports higher feed rates while protecting the insert life and machine uptime. Compact diameter and modular insert system to lower inventory costs A compact 40 mm diameter makes the tool suitable for tight set-ups and multi-tool turrets, while the acceptance of LNMU 0303 indexable inserts enables economical re-indexing rather than full-body replacement. The modular approach reduces tooling stock and simplifies tool management: workshop planners benefit from predictable consumable consumption and straightforward insert procurement, particularly when pairing with Tungaloy inserts commonly stocked across suppliers. Robust mounting and easily serviceable components for reliable production Secure retention is ensured by the M16 thread and a 23 mm thread engagement height, combined with Torx fastenings (key T8, screw M2.5x7) for repeatable clamping torque. The tool’s six cutting edges allow multiple indexings before an insert change is necessary, improving cost per cut. With a 63 mm overall length and a compact mass (approx. 0.272 kg), the cutter minimises overhang and vibration in many standard milling set-ups, supporting consistent dimensional outcomes in serial work. Predictable performance tailored to CNC workflows Designed as a modular, coolant-fed cutter, the unit delivers predictable machining cycles and straightforward maintenance procedures. The use of indexable inserts means wear-related downtime is reduced to rapid insert swaps, while the physical dimensions and fastening standardisation permit quick integration into existing tool lists. These characteristics support continuous production with a focus on operational efficiency and measurable process reliability. For application guidance on Teknik Makina’s VT307-1TM screw-in milling cutter, or to confirm insert compatibility and delivery options from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT307-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Internal coolant: Yes Core specifications Diameter: 40 mm Overall length: 63 mm Thread: M16 Thread height: 23 mm Cutting edges: 6 Cutting height: 40 mm Weight: 0.272 kg Torx key: T8 Torx screw: M2.5x7 Compatibility & features For LNMU 0303 indexable inserts Compatible insert manufacturer: Tungaloy Six cutting edges Coolant-fed design Torx fasteners for secure clamping FAQ Which inserts are compatible with this cutter? The cutter accepts LNMU 0303 indexable inserts; compatibility with Tungaloy inserts is indicated for standard insert geometry and clamping. Does the tool provide internal coolant delivery? Yes, the VT307-1TM is a coolant-fed screw-in milling cutter designed to channel coolant directly to the cutting zone. How is the tool mounted to the machine? Mounting is via an M16 thread with a 23 mm thread engagement and secured with Torx fasteners (key T8, screw M2.5x7) for repeatable clamping. How many indexing positions are available per insert? The design accommodates inserts with six cutting edges, allowing multiple indexings to extend effective tool life and reduce consumable cost. What are the main dimensions and weight of the cutter? Key dimensions are 40 mm diameter and 63 mm overall length; the tool weighs approximately 0.272 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Cutter for LOGU 0303 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Robust cutting stability, integrated coolant supply and a standard M16 screw-in connection combine to deliver efficient, repeatable machining operations; order the VT319-1TM directly via Metav Werkzeuge or consult our specialists for application guidance. VT319-1TM screw-in milling cutter — 40 mm, internal coolant (Teknik Makina) The VT319-1TM screw-in milling cutter is a coolant-fed cutting head for LOGU 0303 indexable inserts, engineered for stable face and slot machining in industrial milling and turning cells. 40 mm diameter for stable cutting Internal coolant for improved chip evacuation M16 screw-in connection Compatible with Kyocera LOGU 0303 inserts Five cutting edges with 45 mm cutting height Faster, more consistent metal removal for higher throughput The compact head and 40 mm diameter profile deliver a balanced combination of rigidity and access, which supports higher metal removal rates while limiting chatter. The combination of five cutting edges and a 45 mm cutting height enables longer effective cutting engagement per indexing step, reducing tool-change frequency. The M16 screw-in mounting ensures a repeatable fit and helps maintain concentricity in serial production, while the moderate mass (approx. 0.316 kg) keeps spindle load predictable without compromising stability. Coolant-fed clamping and proven insert compatibility reduce downtime An internal coolant channel supplies cutting fluid directly to the cutting zone, so heat is extracted at source and chip evacuation is improved; this results in extended insert life and fewer interruptions for insert changes. Insert clamping is secured with an M3x7 Torx screw, operated with a T8 Torx key for rapid, toolroom-friendly maintenance. The tool accepts Kyocera LOGU 0303 indexable inserts, providing access to a wide range of grades and geometries for finishing, roughing or mixed applications. Simple integration and dependable handling in production environments With an overall length of 68 mm and a standard M16 thread, the cutter is straightforward to integrate into existing toolholders and adapters, enabling quick retrofits without special adapters. The screw-in design and clear numeric specifications make tool inventory and replacement predictable across batches. The cutter's features support process standardisation, which contributes to consistent part quality and a reliable supply chain when sourced via established distributors. Contact Metav Werkzeuge for a tailored recommendation on integrating the VT319-1TM into current setups or to confirm compatibility with specific machines; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT319-1TM Manufacturer: Teknik Makina Product type: Einschraubfräser For indexable inserts: LOGU 0303 Compatible inserts manufacturer: Kyocera Facts Diameter: 40 mm Overall length: 68 mm Thread: M16 Thread height: 23 mm Cutting edges: 5 Cutting height: 45 mm Weight: 0.316 kg Torx key: T8 Torx screw: M3x7 Internal coolant: yes Special features Internal coolant supply to cutting zone M16 screw-in connection Compatible with Kyocera LOGU 0303 indexable inserts Five cutting edges for extended indexing FAQ Which insert type fits this cutter? The VT319-1TM accepts LOGU 0303 indexable inserts; compatibility with Kyocera insert variants is specified for straightforward supply choices. How is the insert secured? Insert clamping uses an M3x7 Torx screw tightened with a T8 Torx key for reliable fixation and fast replacement of inserts. Does the cutter provide coolant to the cutting edge? Yes, the internal coolant channel supplies fluid directly to the cutting zone to improve cooling and chip evacuation on the VT319-1TM. What mounting thread is required for installation? The tool uses an M16 screw-in connection with a thread height of 23 mm for secure, repeatable mounting. Is the tool suitable for high-material-removal applications? The combination of a 40 mm head, five cutting edges and a 45 mm cutting height provides strong cutting capacity and extended index life for many roughing and semi-finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Cutter for LOGU 0303 Indexable Inserts, M16 Thread L68mm - Teknik Makina
Benefit from a compact, secure tool that combines a 40 mm diameter, an M16 screw-on connection and compatibility with LOGU 0303 indexable inserts — a practical choice for consistent chip removal and short setup times. Order the screw-in milling cutter directly via Metav Werkzeuge or consult the technical advisors for a tailored specification. Screw-in milling cutter VT319TM — 40 mm, M16 thread, for LOGU 0303 inserts (Teknik Makina) The screw-in milling cutter for LOGU 0303 indexable inserts, designed for medium-depth milling where secure mounting and straightforward insert replacement save machine time 40 mm diameter for medium-depth milling M16 screw-in connection for secure mounting Compatible with LOGU 0303 indexable inserts Five cutting edges for smooth material removal Reliable mounting and consistent machining results The tool’s M16 thread and compact form ensure a positive, vibration-resistant connection between spindle and cutting head. This reduces chatter and helps to keep tolerances tight over extended runs. With a 68 mm total length and a 23 mm thread height, the design balances reach and rigidity, making it suitable for standard toolholders where a short overhang is required. The robust connection and precise seating of the insert pocket contribute directly to predictable cycle times and repeatable surface quality, which is essential in series production and job-shop environments. Efficient productivity through indexable inserts and serviceable design Equipped to accept LOGU 0303 indexable inserts and compatible with Kyocera inserts, the head is set up for rapid index changes and economical regrinds. The cutter features five cutting edges, which extends runtime between interventions and reduces tooling cost per part when compared with single-edge solutions. Maintenance and insert changes are carried out with the supplied fastening specification — Torx T8 key and M3x7 Torx screw — allowing quick, standardised intervention by workshop personnel. The result is lower downtime and improved overall equipment effectiveness. Practical handling, straightforward specification and workshop fit At a weight of 0.316 kg and with a 45 mm cutting height, the item is light enough for easy handling while providing sufficient engagement for routine milling tasks. The compact head means the assembly is compatible with many common clamping systems; mounting is simple and repeatable, aiding setup reproducibility across shifts. Supplied as a finished cutter body ready for inserts, the design focuses on compatibility and serviceability, which makes it a pragmatic choice for both production and maintenance departments seeking to standardise tooling across machines. Order the Teknik Makina screw-in milling cutter via Metav Werkzeuge for dependable compatibility with LOGU 0303 inserts and fast, expert advice from our sales engineers at Metav Werkzeuge Technical data Article number: VT319TM Label: 40mm Einschraubfräser LOGU 0303 L68mm Manufacturer: Teknik Makina Product type: Screw-in milling cutter ECLASS: 21180806 Dimensions & core data Diameter: 40 mm Total length: 68 mm Thread height: 23 mm Cutting height: 45 mm Thread: M16 Number of cutting edges: 5 Weight: 0.316 kg Compatibility & special features For LOGU 0303 indexable inserts Compatible insert manufacturer: Kyocera Torx key: T8 Torx screw: M3x7 SKU / UID: VT319TM / VT319TM FAQ What insert type does this cutter accept? The 40 mm screw-in milling cutter accepts LOGU 0303 indexable inserts; compatibility with Kyocera inserts is specified for straightforward sourcing and replacement. What is the mounting connection for this cutter? Mounting is via an M16 screw-in thread, providing a secure, repeatable connection suited to medium-overhang setups. How many cutting edges are available and what benefit do they provide? The cutter is configured with five cutting edges, which lengthens runtime between insert changes and reduces tooling cost per component through multiple indexed edges. Which tools are required for insert replacement? Insert retention uses a Torx M3x7 screw, serviced with a T8 Torx key, enabling rapid and standardised insert changes. Is the cutter ready to use on delivery? The tool is supplied as a finished cutter body for LOGU 0303 inserts; inserts must be fitted before machining, and fastening follows the supplied Torx specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Cutter for RDMT 1003 Indexable Inserts 5-Flute, M16 Thread, 35.5mm Cutting Height - Teknik Makina
Benefit from a compact Ø 40 mm working diameter combined with a robust M16 screw-in mounting and five cutting edges for stable, productive milling; order the VT108TM through Metav Werkzeuge or consult our specialists for application support. Screw-in Milling Cutter VT108TM — for RDMT 1003 indexable inserts, Ø 40 mm, M16 thread (Teknik Makina) The Screw-in Milling Cutter VT108TM is a compact, screw-mounted milling head engineered for efficient face milling with RDMT 1003 indexable inserts, ideally suited to light and medium-duty production tasks. Ø 40 mm working diameter M16 screw-in mounting Five cutting edges for stable cutting Compatible with RDMT 1003 inserts High productivity in a compact tool The VT108TM milling head delivers a compact solution for face milling where space and setup time matter. Its Ø 40 mm diameter and screw-in design permit quick tool changes while maintaining reliable geometry; this supports shorter cycle times and consistent surface quality. The combination of a screw-mounted body and a modest 0.241 kg mass reduces spindle load during acceleration and deceleration phases, which can improve throughput on small-batch and repeat production runs. Secure clamping and straightforward assembly Engineered for dependable clamping, the cutter features an M16 screw-in interface and a dedicated locking screw M3.5 with a Torx M3.5x8.5 fastener; assembly and insert clamping use a T15 Torx key. These standardised connections ensure a repeatable setup and minimise the risk of improper seating. The straightforward attachment method reduces downtime during insert changes and allows maintenance staff to perform safe, fast interventions without special tooling. Consistent cutting performance and tool life Equipped for RDMT 1003 inserts, the cutter provides five cutting edges that distribute cutting forces evenly, promoting stable engagement and improved chip evacuation. The increased number of edges helps maintain surface finish at moderate depths of cut and supports longer intervals between insert indexing. For operations prioritising reliability, the tool’s geometry contributes to predictable tool wear, which simplifies maintenance planning and inventory control. Practical fit for varied milling tasks The screw-in head, with a cutting height 35.5 mm and an overall length of 60 mm, offers a compact footprint that suits tighter machine envelopes while still permitting sufficient insert overhang for effective material removal. As a specialist milling head designed for indexable inserts, it integrates well into production cells that use modular tooling concepts, allowing flexible adaptation to different part programmes without extensive toolholder changes. Contact Metav Werkzeuge for tailored technical advice and to secure the Screw-in Milling Cutter VT108TM for precise, reliable face milling — assistance and regional supply are available directly from Metav Werkzeuge in Emmerich Technical Data SKU: VT108TM Brand: Teknik Makina Product type: Screw-in milling cutter Compatible inserts: RDMT 1003 Dimensions & Core Data Diameter: 40 mm Thread: M16 Thread length: 24.5 mm Cutting height: 35.5 mm Overall length: 60 mm Weight: 0.241 kg Number of cutting edges: 5 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Features & Special Attributes Screw-in mounting for quick tool changes Designed for RDMT 1003 indexable inserts Five-edge configuration for stable cutting Compact geometry for tight machine envelopes FAQ Which inserts fit this screw-in cutter? The VT108TM is designed for RDMT 1003 indexable inserts; use the appropriate grade and geometry of RDMT 1003 inserts for the workpiece material. What mounting interface is required on the spindle? A screw-in receptacle with an M16 internal thread is required to mount the VT108TM securely. How are inserts secured and serviced? Inserts are clamped and the head secured using the M3.5 locking screw and the M3.5x8.5 Torx screw; a T15 Torx key is specified for maintenance tasks. Is this cutter suitable for high-speed machining? The VT108TM’s compact design and multiple cutting edges support efficient, stable cutting at moderate spindle speeds; selection of insert grade and cutting parameters should match the material and machine capability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Cutter for XEKT 1904 Indexable Inserts L82mm Internal Coolant, 3 Teeth, M16 Thread - Teknik Makina
Take advantage of the combination of a 40 mm cutting diameter, internal coolant and proven compatibility with XEKT 1904 indexable inserts for stable, high‑productivity milling. Order the screw‑in cutter VT262-1TM directly via Metav Werkzeuge or request application advice from the technical consultants. Screw-in cutter VT262-1TM — 40 mm diameter, internal coolant (Teknik Makina) A robust screw‑in cutter designed for face milling with XEKT 1904 indexable inserts, suited to industrial component machining where coolant supply and rapid insert changes are required. 40 mm diameter for stable machining Internal coolant channel for effective cooling Compatible with XEKT 1904 indexable inserts Increased productivity through coolant-fed tooling The tool body delivers coolant directly to the cutting edge via an internal coolant channel, which reduces temperature at the cutting zone and helps prevent built‑up edge. The combination of a 40 mm diameter and the coolant-fed design improves chip evacuation and allows for more consistent cutting parameters, translating into longer insert life and fewer interruptions for rework. The compact 82 mm overall length balances rigidity and access to confined work areas, supporting steady throughput on batch and single‑piece production. Secure mounting and repeatable results A robust M16 thread with a 28 mm thread height ensures reliable clamping force and simple installation on compatible toolholders. The body accepts XEKT 1904 indexable inserts (Korloy compatible), providing a predictable cutting geometry across three edges. The presence of three cutting edges offers balanced load distribution and reduced vibration, which leads to more consistent surface finish and extended tool service intervals. Quick insert changes are supported by the supplied Torx interface (T15) and M4x8.5 Torx screw for secure fixation. Application versatility and straightforward maintenance Designed for industrial milling applications, the cutter supports common finishing and semi‑finishing operations when used with the specified insert series. Direct coolant supply reduces thermal wear and facilitates machining at higher feed rates while maintaining tolerances. Routine maintenance is limited to periodic screw checks and insert replacement; the standardised insert family simplifies stocking and reduces downtime. For tailored cutting data or material suitability, Metav Werkzeuge can provide guidance to match the tool body to the specific machining task. Contact Metav Werkzeuge for application support or to order the Teknik Makina VT262-1TM screw-in cutter with internal coolant and XEKT 1904 compatibility Technical data Article number: VT262-1TM Label: 40mm screw-in cutter XEKT 1904 L82mm with internal coolant Manufacturer: Teknik Cutting Tools Facts Diameter: 40 mm Overall length: 82 mm Thread: M16 Thread height: 28 mm Cutting edges: 3 Cutting height: 55 mm Weight: 0.307 kg ECLASS: 21180806 Special features Internal coolant: yes Compatible with XEKT 1904 indexable inserts Insert supplier compatibility: Korloy Torx key: T15 Torx screw: M4x8.5 Product type: screw-in cutter FAQ Is the cutter compatible with Korloy inserts? The screw‑in cutter VT262-1TM is compatible with XEKT 1904 indexable inserts and specified as Korloy‑compatible in the product data. How does the internal coolant benefit machining? Internal coolant on the VT262-1TM delivers coolant directly to the cutting zone, reducing cutting temperatures and prolonging insert life while improving chip control. What thread and mounting dimensions are required? The cutter uses an M16 thread with a 28 mm thread height; this specification provides secure clamping and repeatable mounting on appropriate toolholders. How many cutting edges does the tool body support and what is the advantage? The tool body accepts three cutting edges, which helps balance cutting forces and reduces chatter, resulting in a steadier finish and longer service intervals. Which Torx key and screw are supplied for insert retention? Insert retention is secured with a Torx T15 interface and M4x8.5 Torx screw as specified for the VT262-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Face Mill for APKT 1003 Indexable Inserts 5 Teeth, M16 Thread, 35.5mm Cutting Height - Teknik Makina
Take advantage of the robust compatibility with APKT/APXT 1003 indexable inserts and the secure M16 screw-in mounting to reduce setup time and increase process stability; order the VT148TM via Metav Werkzeuge or consult our specialists for application advice. VT148TM screw-in milling head — Ø40 mm, M16 threaded mounting (Teknik Makina) The VT148TM screw-in milling head is a compact, industrial-grade cutter designed for indexable-insert milling with APKT/APXT 1003 inserts, suitable for demanding production and reconditioning tasks in metalworking environments. M16 threaded screw-in mounting Ø40 mm cutting diameter Compatible with APKT/APXT 1003 inserts Five cutting edges with 90° cutting angle Stable clamping and consistent indexable-insert performance The combination of an M16 thread with a defined threaded engagement height provides a rigid connection to the tool holder, which improves repeatability and reduces run-out during machining. With a Ø40 mm cutting diameter and a classic 90° cutting angle, the head is optimised for square-shoulder operations and predictable toolpaths. This mechanical stability translates into fewer re‑setups, more consistent part tolerances and a lower incidence of insert misalignment in serial production. Built for reliability and vibration resistance A measured 60 mm overall length with a 35.5 mm cutting height concentrates mass where it supports stability while keeping overhang low. The head weighs 0.266 kg, which helps to reduce tip deflection in short‑to‑medium reach operations. Secure fastening is achieved with a dedicated Torx M2.5x5.5 screw, tightened via a T8 key, ensuring the clamping force remains constant under intermittent loads. The result is reduced chatter, steadier cutting forces and extended insert life when process parameters are respected. Fast insert changes and broad insert compatibility Designed for use with APKT 1003 style indexable inserts and noted as suitable for APXT 1003 inserts, the VT148TM supports common insert geometries and sizes from established suppliers such as Korloy, enabling straightforward replacement and inventory alignment. The standardised screw and key combination simplifies maintenance routines so insert swaps are rapid and predictable, which reduces downtime on the shop floor and streamlines tooling logistics. Application focus and expected benefits in production The tool head is a practical choice for industrial milling applications where indexable inserts are preferred for economy and quick reconditioning. With five cutting edges and a secure screw-in mount, the head offers an efficient compromise between cutting capacity and compactness for dedicated machining centres and milling spindles supporting M16 screw-in tooling. Expect improved process stability, simplified tool management and reproducible results in repetitive milling tasks. For tailored advice on integrating the VT148TM screw-in milling head into existing tool setups, contact Metav Werkzeuge for stock information and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: VT148TM Type: Screw-in milling head for indexable inserts Designation: for APXT 1003 Indexable Inserts eClass: 21180806 ETIM: EC011860 Diameter: 40 mm Thread: M16 Threaded engagement height: 24.5 mm Cutting height: 35.5 mm Overall length: 60 mm Cutting edges: 5 Cutting angle: 90° Weight: 0.266 kg Compatible inserts: APKT 1003; APXT 1003 Recommended insert maker: Korloy Mounting screw: Torx M2.5x5.5 Required key: T8 SKU identifier: VT148TM FAQ Which inserts fit the VT148TM? The VT148TM accepts APKT 1003 style indexable inserts and is described for APXT 1003 indexable inserts; compatible inserts from Korloy are suitable for standard applications. What mounting thread is used on the tool head? The cutter uses an M16 screw-in thread with a threaded engagement height of 24.5 mm for secure mounting. How many cutting edges does the milling head offer? The VT148TM features five cutting edges and a 90° cutting angle, designed to support repeatable shoulder milling tasks. What fastener and tool are required to change inserts? Insert clamping is done with a Torx M2.5x5.5 screw that is tightened or released with a T8 Torx key. Is the overall length suitable for compact toolholders? With a 60 mm overall length and a weight of 0.266 kg, the head is compact and suitable for many short-reach toolholder setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Screw-In Face Mill For APMT 0903 Indexable Inserts, 6 Teeth, 25.3mm Cutting Height, M16 Thread - Teknik Makina
Benefit from a compact tool that combines a 40 mm cutting diameter, six cutting edges and a secure M16 screw-in connection for stable, high-throughput machining; order the screw-in milling cutter directly via Metav Werkzeuge or ask our consultants if needed. VT229TM screw-in milling cutter for APMT 0903 indexable inserts — 40 mm, M16 (Teknik Makina) The screw-in milling cutter by Teknik Makina is a robust insert-holder designed for indexable APMT 0903 inserts, offering secure mounting and efficient chip evacuation for mixed-production milling tasks. 40 mm diameter for stable cutting M16 screw-in connection for firm clamping Six cutting edges for higher material removal Compatible with APMT 0903 inserts from Korloy Consistent material removal with low vibration The VT229TM is engineered to deliver steady cutting performance through its 40 mm diameter and six cutting edges, which distribute cutting forces and reduce vibration. The moderate 15° cutting angle lowers peak loads on the insert, which helps to extend insert life and maintain surface quality during continuous operation. Because axial and radial forces are managed more evenly, cycle times are optimised and tool-change intervals can be extended without sacrificing component tolerances. Fast insert changes and secure clamping for production Compatibility with APMT 0903 indexable inserts means insert procurement and stocking are straightforward, and changes are carried out quickly with the supplied Torx fixation. Insert retention is achieved with a M2.5×5.5 Torx screw tightened using a T7 key, ensuring repeatable clamping force and minimised downtime. This arrangement supports predictable set-up times in the workshop and reduces handling errors when switching from roughing to finishing grades. Reliable screw-in interface for concentricity and stability The screw-in thread M16 with a 40 mm thread length provides a solid interface to the toolholder or arbor, improving concentricity and reducing run-out. The tool’s overall length (65.3 mm) and a defined cutting height of 25.3 mm allow for clear installation depths and repeatable positioning in multi-spindle or automated fixtures. The combination of thread design and precise fit enables accurate torque transmission and consistent machining geometry across batches. Practical benefits for mixed workshop and industrial use At a weight of 0.299 kg, the cutter balances rigidity with low spindle load, helping to preserve spindle bearings during high-volume shifts. The holder’s geometry supports both stable roughing and fine finishing passes when fitted with appropriate insert grades; choice of insert and cutting data governs final surface finish and tool life. Supplied compatibility with Korloy-manufactured inserts simplifies supply chains and supports efficient workshop stocking and planning. For procurement or technical advice on Teknik Makina tooling, contact Metav Werkzeuge — Metav’s specialists in precision supplies will advise on suitability and ordering; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT229TM Manufacturer: Teknik Makina Product: Screw-in milling cutter for APMT 0903 indexable inserts Facts Diameter: 40 mm Thread: M16 Thread height: 40 mm Number of cutting edges: 6 Cutting angle: 15° Total length: 65.3 mm Cutting height: 25.3 mm Weight: 0.299 kg Special features Compatible inserts: APMT 0903 Compatible insert manufacturer: Korloy Torx screw: M2.5×5.5 Torx key: T7 Intended for screw-in mounting FAQ Which inserts fit this tool? The screw-in milling cutter VT229TM from Teknik Makina is specified for APMT 0903 indexable inserts; Korloy variants are indicated as compatible. How is the insert secured? An M2.5×5.5 Torx screw secures the insert; the Torx head size is T7 to ensure consistent clamp force when using the correct key. What is the mounting interface for the cutter? Mounting is via an M16 screw-in thread with a 40 mm thread height, providing a rigid, concentric connection for stable milling. How many cutting edges does the holder provide and what is the effect? The holder features six cutting edges, which allow for increased material removal per revolution and smoother cutting action, improving throughput and surface consistency. Is the tool appropriate for automated changeover in production? Yes; the VT229TM’s defined length (65.3 mm), repeatable thread interface and Torx-clamped inserts support predictable set-up and fast insert replacement for automated or high-mix environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Face Mill for APXT 1003 Indexable Inserts 5 Teeth With Internal Coolant, M16 Thread - Teknik Makina
Take advantage of a combination of efficient material removal, coolant-assisted chip evacuation and easy insert compatibility for uninterrupted production. The compact design with an M16 thread and internal coolant reduces changeover time and extends tool life — order directly via Metav Werkzeuge or consult the team for technical advice. 40 mm screw-in cutter for APXT 1003 indexable inserts — five-flute milling head with internal coolant (Teknik Makina) The 40 mm screw-in cutter for APXT 1003 indexable inserts is a precision milling head designed for face and light shoulder milling in industrial and job-shop environments, delivering consistent surface quality and straightforward insert replacement. 40 mm diameter for efficient material removal Internal coolant for enhanced tool life Five cutting edges for smooth surface finishes Compatible with APXT 1003 inserts by Korloy Consistent cutting performance with reduced cycle times This screw-in milling head combines a 40 mm cutter diameter with five cutting edges to deliver steady chip loads and a balanced spindle torque. The larger number of flutes spreads the cutting forces over more edges, which often leads to improved surface finish and longer cumulative edge life compared with fewer-flute alternatives. The tool's geometry is engineered to enable efficient chip formation while maintaining dimensional stability, so process planners can rely on predictable tool behaviour during medium-duty milling operations. Coolant-fed design and easy insert handling for higher uptime The integrated internal coolant channeling improves cooling directly at the cutting zone, supporting better chip evacuation and reduced thermal load on the insert pocket. For indexable systems such as APXT 1003, this means faster heat dissipation and more consistent cutting conditions across longer runs. Insert changes are secured using the supplied Torx fixation; the head accepts a Torx T8 key and a Torx screw size of M2.5x5.5, enabling quick, repeatable clamp torque and minimal setup time for operators who maintain production flow. Robust connection and compact overall dimensions for simple integration A robust M16 thread connection and a compact 60 mm overall length allow the milling head to be mounted securely in standard screw-in toolholders while keeping overhang low, which helps reduce deflection and vibration in cantilevered setups. The construction balances stiffness and weight — listed at 0.266 kg — for easy handling and consistent runout control. Compatibility with Korloy APXT 1003 inserts ensures broad supply availability and straightforward tool inventory management for procurement and production teams. Contact Metav Werkzeuge for detailed compatibility checks and reliable supply of the Teknik Cutting Tools screw-in cutter with internal coolant and APXT 1003 insert support Technical Data Article number: VT148-1TM Label: 40 mm screw-in cutter APXT 1003 L60 mm with internal coolant Manufacturer: Teknik Cutting Tools Facts Diameter: 40 mm Overall length: 60 mm Thread height: 24.5 mm Cutting-edge height: 36 mm Thread: M16 Number of cutting edges: 5 Weight: 0.266 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant Compatible with APXT 1003 indexable inserts Suitable for face and light shoulder milling Screw-in connection Korloy-compatible insert system FAQ What insert type does this cutter accept? The cutter accepts APXT 1003 indexable inserts; it is compatible with inserts from Korloy specified for that geometry. Is the tool suitable for heavy roughing operations? This screw-in cutter is intended for medium-duty face and shoulder milling; for heavy roughing a tool with a larger diameter and reduced overhang is recommended. How is the coolant delivered to the cutting zone? Coolant is supplied through the tool body via internal coolant channels, improving chip evacuation and thermal control at the insert edge. What fastening hardware is used for the inserts? Inserts are secured with a Torx screw (M2.5x5.5) tightened with a Torx T8 key to ensure consistent clamping force. Can the tool be used in high-speed applications? The tool design supports industrial spindle speeds typical for indexable insert milling; final speed recommendations should follow insert and workpiece material guidelines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Face Mill For RDMT 1003 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Benefit from high rigidity, efficient chip evacuation and precise mounting thanks to the combination of a 40 mm diameter, internal coolant and an M16 screw-in interface; order the tool directly via Metav Werkzeuge or consult our advisors for application support. VT108-1TM — 40 mm screw-in milling cutter with internal coolant (Teknik Makina) VT108-1TM is a screw-in milling cutter for RDMT 1003 indexable inserts, engineered for reliable face and shoulder milling in workshop and production environments. 40 mm diameter for broad material removal Internal coolant for improved tool life M16 thread, 24.5 mm thread length Accepts RDMT 1003 indexable inserts Increased material removal with predictable results The 40 mm diameter body combined with five cutting edges provides a balance between material removal rate and surface quality. The design delivers stable cutting forces and consistent engagement when fitted with RDMT 1003 indexable inserts, which reduces vibration and contributes to predictable machining cycles. This translates into fewer insert changes and less setup time, supporting higher throughput on repetitive face and shoulder milling tasks. Coolant-through design that prolongs service life A coolant supply routed through the cutter head targets the cutting zone directly, improving heat dissipation and chip control. The internal coolant reduces thermal load on the insert and the cutting edge, which helps maintain cutting geometry for longer and supports improved surface finish without additional passes. The lightweight body (approx. 0.241 kg) minimises toolholder overhang effects while still allowing effective coolant delivery to the insert seat. Simple mounting, secure fastening and fast reconditioning The screw-in interface with M16 thread and a thread height of 24.5 mm gives a compact, repeatable mounting position for straightforward set-up. The overall length 60 mm keeps overhang low to preserve stiffness. Inserts are secured with a Torx screw ( M3.5x8.5 ) using a Torx T15 driver, enabling fast index changes and straightforward maintenance routines. Compatibility with standard insert clamping procedures ensures cost-efficient reconditioning and minimal downtime. Contact Metav Werkzeuge for availability and technical advice on the VT108-1TM screw-in milling cutter by Teknik Makina; order from our Emmerich warehouse or request application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT108-1TM Brand: Teknik Makina Product: Screw-in milling cutter (Einschraubfräser) Designation: for RDMT 1003 Indexable Inserts ECLASS: 21180806 Numbers / Core technical data Diameter: 40 mm Overall length: 60 mm Weight: 0.241 kg Thread: M16 Thread height: 24.5 mm Number of cutting edges: 5 Cutting height: 35.5 mm Torx key: T15 Torx screw: M3.5x8.5 Special features Internal coolant (coolant-through) For RDMT 1003 indexable inserts Screw-in mounting for compact setup Fast insert clamping with Torx screw FAQ Which indexable inserts fit this cutter? The cutter accepts RDMT 1003 indexable inserts; the VT108-1TM is configured specifically for that insert family to ensure correct seating and reliable cutting performance. Does the cutter provide coolant to the cutting edge? Yes, the VT108-1TM features internal coolant, supplying lubricant directly to the insert seat and cutting zone to improve chip evacuation and extend insert life. What are the mounting and dimensional specifications? Mounting is via an M16 screw-in thread with a thread height of 24.5 mm and an overall length of 60 mm, ensuring a compact, repeatable setup. How are the inserts fastened and which tool is required? Inserts are secured with an M3.5x8.5 Torx screw; a Torx T15 driver is used for tightening and replacement operations. Is the cutter suitable for quick insert changes in production? The combination of standard RDMT 1003 inserts, Torx fastening and screw-in mounting makes the VT108-1TM suitable for efficient insert changes and short maintenance cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Face Mill For RDMT 12T3 Indexable Inserts 4 Cuts, M16 Thread - Teknik Makina
Secure rigid mounting and reliable chip removal with high repeatability thanks to the Teknik Makina screw-in milling cutter’s M16 thread, four cutting edges and compact 60 mm overall length. Benefit from a balanced combination of precise dimensions and straightforward servicing — order directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina screw-in milling cutter for RDMT 12T3 indexable inserts — M16, 40 mm diameter The Teknik Makina screw-in milling cutter is a compact cutter head designed for secure screw-in mounting and the use of RDMT 12T3 indexable inserts in industrial milling applications. Screw-in body with M16 thread 40 mm cutter diameter Four cutting edges for stable cuts Torx T15 clamp screw included Precise mounting and stable cutting for consistent production results The screw-in milling cutter is engineered for repeatable performance in production environments. Its M16 thread and 24.5 mm thread height deliver a secure, concentric fit that reduces vibration and improves tool life, while the 40 mm nominal diameter provides a predictable cutting envelope. Using RDMT 12T3 indexable inserts on a four-edge head means the cutting geometry is distributed across multiple edges, which lowers per-edge wear and extends the interval between maintenance events. The relatively low mass of 0.23 kg contributes to reduced spindle load and enables quicker acceleration in short-cycle operations, supporting productivity without compromising surface finish. Fast insert changes and robust clamping to shorten downtime Maintenance and insert replacement are simplified by the Torx-secured clamping system: a Torx T15 key interfaces with the M3.5x8.5 clamp screw and a separate M3.5 lock screw secures the insert position. This familiar interface enables rapid, tool-based insert changes and consistent torque application, reducing the risk of misclamping. The cutter’s 35.5 mm cutting height gives sufficient engagement for deep or light cuts while maintaining rigidity, so the overall process efficiency benefits through lower setup time and fewer interruptions — a clear rational advantage for batch-oriented and flow-line machining. Compact dimensions that suit versatile fixture arrangements Measured dimensions support diverse fixture and machine tool setups: the overall length of 60 mm combined with the 24.5 mm thread engagement and a 40 mm diameter head make this milling unit suitable for confined tool pockets and modular toolholding systems. The four cutting edges contribute to balanced cutting forces, which assists in maintaining machine stability and repeatability across series production. These measurable attributes translate into tangible benefits: predictable tool behaviour, easier process planning and a reduced need for frequent rework, making integration into existing tool assortments straightforward. Contact Metav Werkzeuge for tailored advice on Teknik Makina screw-in milling cutters, compatibility checks and delivery from Emmerich — our consultants are ready to support production planning and tool selection Technical Data Article number: VT128TM Designation: screw-in milling cutter for RDMT 12T3 indexable inserts Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Weight: 0.23 kg Key measurements Diameter: 40 mm Overall length: 60 mm Cutting height: 35.5 mm Thread height (screw-in): 24.5 mm Number of cutting edges: 4 Thread: M16 Features & fastening Compatible with RDMT 12T3 indexable inserts Torx clamp screw: M3.5x8.5 Torx key size: T15 Locking screw: M3.5 FAQ What insert type fits this screw-in milling cutter? The cutter is designed for RDMT 12T3 indexable inserts; this specification ensures correct seating and chip evacuation when using the designated insert geometry. How is the insert clamped and secured? Insert clamping is achieved with an M3.5x8.5 Torx clamp screw (Torx T15) and an M3.5 lock screw to maintain positioning under cutting loads. Which machines and toolholders are suitable for this cutter? The screw-in interface is an M16 thread with 24.5 mm engagement, suitable for toolholders and adaptors that accept M16 screw-in milling heads in standard CNC and milling setups. What are the key dimensions to consider during setup? Important dimensions are a 40 mm diameter, 60 mm overall length and 35.5 mm cutting height; these determine reach, rigidity and suitable fixture clearance. How does the cutter support production efficiency? With four cutting edges, secure M16 mounting and quick Torx-based clamping, the design reduces downtime for insert changes and improves consistency across serial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Screw-In Face Mill for RDMT 12T3 Indexable Inserts L60mm With Internal Cooling - Teknik Makina
Benefit from a combination of stable cutting performance and straightforward maintenance: the screw-in design with an M16 connection and internal coolant ensures consistent chip evacuation and reliable clamping. Order the screw-in milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. VT128-1TM Screw-in milling cutter for RDMT 12T3 – 40 mm, internal coolant (Teknik Makina) The VT128-1TM screw-in milling cutter is a compact cutter engineered to accept RDMT 12T3 indexable inserts, offering a secure screw-in connection and targeted coolant delivery for efficient milling in production and job-shop environments. 40 mm cutter diameter for stable cutting Internal coolant for improved chip evacuation M16 screw-in connection with 24.5 mm thread height Four cutting edges with 35.5 mm cutting height Engineered for secure clamping and precision milling The screw-in construction with an M16 thread and a thread height of 24.5 mm provides a mechanically robust connection that reduces runout and vibration during milling. With a 40 mm cutter diameter and an overall length of 60 mm, the tool balances rigidity and accessibility, enabling steady cutting forces and repeatable results in series production. The design is optimised for use with RDMT 12T3 indexable inserts, which simplifies tool management and keeps inventory straightforward. This mechanical reliability translates into shorter downtime and more predictable cycle times on CNC milling heads and machining centres. Efficient coolant supply and consistent surface quality The built-in internal coolant channel directs cooling fluid directly to the cutting zone, promoting efficient heat removal and improved chip evacuation. Combined with the tool’s four cutting edges and a cutting-edge height of 35.5 mm, this cooling concept supports higher material removal rates while maintaining a stable cutting edge temperature. The result is a more consistent surface finish and reduced thermal wear on inserts, so insert change intervals can be extended under comparable cutting conditions. For wet machining strategies where controlled coolant delivery is important, this cutter provides a practical technical advantage. Fast insert changes and standardised maintenance Routine maintenance is simplified thanks to the standardised fastening: the insert is secured with a Torx screw (use Torx T15) sized M3.5x8.5, allowing rapid cartridge changes with common workshop tools. The tool’s compact mass (0.23 kg) and 60 mm overall length contribute to manageable handling during set-up and quicker workstation cycles. These characteristics reduce non-cutting time and streamline tool change procedures in multi-shift environments. The screw-in format also avoids the need for clamping adaptors, helping to keep the tooling system compact and repeatable. Broad applicability and supply reliability Designed for general milling tasks where RDMT 12T3 inserts are specified, the cutter is suited to a range of machining scenarios in metalworking shops and production lines. As part of a structured tooling portfolio, the component benefits from Teknik Makina’s manufacturing standards and from Metav Werkzeuge’s distribution and quality-filtering in Europe, ensuring consistent availability and traceable delivery. For customers seeking reliable tooling that integrates with standard indexable inserts and common maintenance procedures, this screw-in cutter represents a pragmatic choice that supports productivity and operational continuity. For expert advice on selecting the correct insert grade or to arrange supply from Metav Werkzeuge, contact our consultants today to discuss the VT128-1TM and its fit for your milling processes. Technical data SKU: VT128-1TM Product type: Screw-in milling cutter For indexable inserts: RDMT 12T3 Manufacturer: Teknik Makina Label: 40mm screw-in milling cutter RDMT 12T3 L60mm with internal coolant Facts Diameter: 40 mm Overall length: 60 mm Thread: M16 Thread height: 24.5 mm Weight: 0.23 kg Cutting edges: 4 Cutting-edge height: 35.5 mm Torx key: T15 Torx screw: M3.5x8.5 eClass: 21180806 Special features Internal coolant Screw-in connection Compatible with RDMT 12T3 indexable inserts Four cutting edges for balanced cutting Compact design for reduced setup space FAQ Is this cutter compatible with RDMT 12T3 inserts? Yes. The VT128-1TM screw-in milling cutter is designed specifically to accept RDMT 12T3 indexable inserts, enabling straightforward integration into existing insert stocks. Does the tool provide internal coolant? Yes. The VT128-1TM includes internal coolant to deliver cooling fluid directly to the cutting zone and support effective chip evacuation. What is the thread size and engagement length? The cutter uses an M16 screw-in connection with a thread engagement height of 24.5 mm for secure clamping. How many cutting edges does the tool have and what is the cutting height? The tool has four cutting edges with a cutting-edge height of 35.5 mm, giving balanced cutting action and stable radial forces. Which Torx key and screw are required for insert fastening? Insert fastening uses a Torx T15 key and a screw sized M3.5x8.5, allowing quick insert changes with standard tools. What workshop applications suit this cutter? The VT128-1TM is suited to general milling operations where RDMT 12T3 inserts are specified; insert grade and cutting parameters should be selected to match the workpiece material and machining strategy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Milling Cutter for 3PKT 1004 Indexable Inserts, Internal Coolant L68mm - Teknik Makina
Benefit from precise chip control and secure clamping thanks to the internal coolant and M16 screw-in interface; the 40 mm diameter with five cutting edges delivers consistent material removal. Order the screw-in milling head directly via Metav Werkzeuge or consult the team for integration advice. Einschraubfräser — 40 mm screw-in milling head with internal coolant (Teknik Makina) The Einschraubfräser for 3PKT 1004 indexable inserts is a compact screw-in milling head engineered for productive face and shoulder milling where coolant supply and secure clamping are essential. Internal coolant for improved chip evacuation Compatible with Taegutec 3PKT 1004 inserts M16 screw-in connection with 25 mm thread length 40 mm diameter, 5 cutting edges, L 68 mm Higher material removal with stable cutting action The screw-in milling head offers a 40 mm diameter and five cutting edges, which supports higher metal removal rates while maintaining surface quality. The relatively tall cutting zone of 43 mm provides effective engagement without frequent tool changes, helping to keep cycle times low. The combination of diameter and multiple cutting edges reduces load per tooth and smooths cutting forces, which in practice means steadier spindle loads and improved productivity for batch and single-part production alike. Built-in coolant and robust connection reduce downtime An internal coolant channel directs lubricant precisely to the cutting zone, enhancing chip evacuation and extending insert life under demanding cutting conditions. The M16 screw-in interface with a 25 mm thread height secures the head in the arbor and simplifies replacement procedures. Fast, reliable fastening using the specified T8 Torx key and M2.5x7 Torx screw ensures minimal set-up time and consistent clamping torque without rework, supporting uninterrupted workflow on production lines. Insert compatibility and predictable maintenance Designed for 3PKT 1004 indexable inserts and compatible with Taegutec insert geometries, the head enables straightforward re-sharpening cycles and predictable tool costing. The standardised insert format helps to harmonise tooling inventories across machines and makes it easier to calculate cost per edge. Where surface finish and repeatability matter, the precise coolant delivery and the multi-edge design combine to give uniform results over series production. Compact design for flexible workshop setups With an overall length of 68 mm and a net weight of 0.258 kg, the milling head is compact enough for tighter setups while still offering a substantial cutting height. The short overhang supports rigidity in confined workspaces and reduces chatter risk. The combination of compact form and engineered coolant routing makes the tool suitable for integration into existing arbors where secure, repeatable performance is required. Contact Metav Werkzeuge for tailored technical advice and to arrange supply of the Teknik Makina VT274TM screw-in milling head for smooth integration into the production process; Metav Werkzeuge can assist with compatibility checks and order processing. Technical data SKU: VT274TM Manufacturer: Teknik Makina Product: 40 mm screw-in milling head for 3PKT 1004 indexable inserts Facts Diameter: 40 mm Overall length: 68 mm Thread: M16 Thread height: 25 mm Cutting edges: 5 Cutting height: 43 mm Weight: 0.258 kg Torx key: T8 Torx screw: M2.5x7 Internal coolant: yes Special features Compatible with Taegutec 3PKT 1004 inserts Screw-in mounting for secure clamping Precision coolant delivery for chip control Compact design for reduced overhang FAQ Is the head compatible with Taegutec inserts? The TekÂnik Makina VT274TM is specified for use with Taegutec 3PKT 1004 indexable inserts and is designed to accept that insert geometry reliably. Does the tool provide internal coolant supply? Yes, the milling head features internal coolant routing to the cutting zone to improve chip evacuation and extend insert life. What fastening tools are required for assembly? Assembly requires a T8 Torx key and the supplied M2.5x7 Torx screw for secure attachment. What are the key dimensions relevant for integration into an arbor? Relevant dimensions include a 40 mm diameter, 68 mm overall length and an M16 screw-in connection with a 25 mm thread engagement. How many cutting edges does the head have and what is the cutting height? The head has five cutting edges and a cutting height of 43 mm, supporting deeper engagement where needed. Hersteller: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Milling Cutter for BLMP 0603 Indexable Inserts L68mm With Internal Coolant, M16 Thread - Teknik Makina
Take advantage of the combination of robust build quality, internal coolant, and a secure M16 screw-in connection to keep machining cycles stable and predictable; order this tool directly via Metav Werkzeuge or consult the Metav team for application support. Screw-in milling cutter VT195-1TM – 40 mm, internal coolant (Teknik Makina) The screw-in milling cutter VT195-1TM offers a compact, reliable solution for indexable-insert face milling in production and jobbing environments, engineered for use with BLMP 0603 inserts. 40 mm solid shank diameter for stable mounting Internal coolant for improved chip evacuation Compatible with BLMP 0603 indexable inserts M16 thread with 25 mm engagement height Consistent high-performance milling for short-cycle production The VT195-1TM is designed to deliver stable cutting performance across repeated cycles. With a 40 mm diameter body and M16 screw-in connection, the tool minimises spindle runout and vibration, which reduces tool wear and maintains component tolerances. The six cutting edges distribute cutting forces evenly, enabling higher feed rates where the machine and workpiece allow. For production planners, this means predictable tool life and fewer unscheduled tool changes. Improved process reliability through internal coolant and insert compatibility Built with integrated internal coolant, the cutter directs fluid close to the cutting zone, promoting efficient chip evacuation and lower cutting temperatures. This reduces built-up edge formation and helps extend the life of indexable inserts. The arbor is specified for BLMP 0603 indexable inserts and fits inserts from Taegutec, ensuring access to a broad range of grades for different materials. For operations facing thermal sensitivity or chip-control issues, the internal coolant feature provides a measurable process advantage. Simple integration and maintenance for workshop efficiency The screw-in design allows rapid replacement and secure seating using the included Torx fastener specification (T8 key, M3x6.2 screw), reducing downtime during tool changes. With a nominal overall length of 68 mm and a cutting-edge height of 43 mm, the cutter fits compact toolholders and provides accessibility in constrained setups. The moderate mass aids dynamic balance without imposing heavy loads on the spindle, which supports reliable cycle times across shifts. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina VT195-1TM screw-in milling cutter and secure reliable supply from Emmerich via phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: VT195-1TM Product type: Screw-in milling cutter Manufacturer: Teknik Makina Core specifications Diameter: 40 mm Overall length: 68 mm Thread: M16 Thread engagement height: 25 mm Cutting edges: 6 Cutting-edge height: 43 mm Weight: 0.291 kg Materials & special features Internal coolant: yes Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 FAQ What inserts fit this screw-in milling cutter? The VT195-1TM is designed for BLMP 0603 indexable inserts and is compatible with inserts from Taegutec, allowing selection of grades suited to the application. Is the tool suitable for use with internal coolant systems? Yes. The cutter features internal coolant to support chip evacuation and reduce cutting-zone temperatures during machining. How is the cutter secured to the toolholder? The arbor uses an M16 screw-in thread with 25 mm engagement and is fastened with the specified Torx screw (M3x6.2), tightened using a T8 Torx key. Can the cutter be used for high-feed roughing operations? With six cutting edges and a stable 40 mm body, the VT195-1TM is suitable for robust roughing where machine power and workholding permit increased feeds. What is the overall length and mass of the tool? The VT195-1TM has an overall length of 68 mm and a mass of 0.291 kg, making it compact and straightforward to balance in many spindle arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Milling Cutter for LNMU 0303 Indexable Inserts M16 Thread, 6 Cutting Edges - Teknik Makina
Take advantage of a robust, screw-in cutter body with a 40 mm cutting diameter and M16 mounting thread for secure insert seating and consistent machining results; order the tool directly via Metav Werkzeuge or consult our specialists for compatibility and delivery options. Screw-in cutter VT307TM – 40 mm diameter, M16 thread by Teknik Makina A screw-in cutter engineered for stable milling with LNMU 0303 indexable inserts, offering quick insert changes and reliable clamping for production and workshop environments. 40 mm cutting diameter M16 screw-in mounting Compatible with LNMU 0303 inserts Six cutting edges for stability Secure insert retention for repeatable results The VT307TM is built around a secure M16 thread mounting system that ensures the cutter body seats firmly in the arbor, reducing axial play and improving repeatability. Combined with the supplied Torx M2.5x7 clamping screw and the standard T8 key, the design allows rapid insert changes while maintaining consistent seat pressure. Indexable inserts such as the LNMU 0303 series locate on the cutter without complex shimming; the result is predictable tool behaviour and fewer set-up adjustments between jobs, which supports higher first-pass quality in serial production. Balanced geometry for reduced vibration and longer tool life A 40 mm diameter tool body with six cutting edges provides a balance between rigidity and chip evacuation. Multiple cutting edges share the cutting forces, lowering load per edge and reducing the tendency to chatter, which translates into improved surface finish and extended insert life. The overall 63 mm length keeps the tool compact for close-tolerance work while leaving sufficient reach for stepped profiles. This combination of diameter, edge count and compact length is well suited to operators seeking dependable throughput without sacrificing stability. Workshop-friendly maintenance and compatibility Maintenance is straightforward: the cutter uses a single Torx clamping screw (M2.5x7) that is tightened with a T8 key, enabling quick replacement of worn inserts and minimal downtime. The body is specified for LNMU 0303 indexable inserts and is listed as compatible with TNGLY-OKE style inserts, simplifying procurement and stocking. Clear component standardisation reduces the variety of spares required in the tool crib and helps maintain machine uptime. Calibration of mounting and insert seating is simple, supporting predictable machining results even when multiple operators are involved. Contact Metav Werkzeuge to discuss the VT307TM screw-in cutter from Teknik Makina, request detailed compatibility advice or arrange supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT307TM Manufacturer: Teknik Makina / Teknik Cutting Tools Model designation: Screw-in cutter for LNMU 0303 Compatible inserts: LNMU 0303 (TNGLY-OKE) Core measurements Cutting diameter: 40 mm Mounting thread: M16 Overall length: 63 mm Number of cutting edges: 6 Design & special features Torx screw: M2.5x7 Torx key size: T8 Indexable insert system: LNMU 0303 Brand: Teknik Makina FAQ What inserts fit this screw-in cutter? The screw-in cutter VT307TM is designed for LNMU 0303 indexable inserts, and compatibility with TNGLY-OKE style inserts is indicated in the product data. Which toolholding thread does the cutter require? The cutter uses an M16 screw-in mounting thread to secure the body in the arbor or holder. How is the insert clamped to the cutter body? Insert clamping is achieved with a Torx M2.5x7 screw; a T8 key is specified for tightening and removal. What are the main benefits of the VT307TM design? The VT307TM by Teknik Makina combines a 40 mm diameter and six cutting edges for enhanced stability, improved surface finish and balanced tool loading. Is the VT307TM suitable for production toolrooms? Yes — the compact 63 mm overall length and standardised insert system make the VT307TM appropriate for workshop and production environments where quick insert changes and repeatable mounting are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Screw-In Milling Cutter for SDMT 09T3 Indexable Inserts With Internal Coolant, M16 Thread - Teknik Makina
Take advantage of precise compatibility, robust mounting and built-in coolant for reliable high-volume milling; order directly via Metav Werkzeuge or consult the team for tailored tooling guidance. Screw-in milling cutter – 40 mm, internal coolant, for SDMT 09T3 (Teknik Makina) A screw-in milling cutter engineered for SDMT 09T3 indexable inserts, offering internal coolant and an M16 thread for secure mounting in modular toolholders 40 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with ZCC SDMT 09T3 inserts M16 thread for fast, secure installation High-efficiency material removal with controlled chip flow The cutter delivers stable metal removal thanks to its 40 mm diameter and three cutting edges, which distribute cutting forces evenly and reduce vibration. Internal coolant channels direct fluid precisely to the cutting zone, improving chip evacuation and helping maintain insert edge life under elevated cutting temperatures. This combination reduces downtime for insert changes and contributes to a more predictable machining process, particularly where consistent surface finish and tool life matter. Robust mounting and quick service cycles Equipped with an M16 thread, the tool secures positively in compatible holders, enabling fast tool changes and repeatable clamping runout. The supplied Torx screw specification (M3.5x8.5) and matching T15 Torx key allow quick, repeatable insert clamping, reducing setup time on the shop floor. With an overall length of 69 mm and a cutting-edge height of 40 mm, the cutter balances reach with rigidity to support medium-reach milling tasks without compromising stability. Broad compatibility and practical workshop integration Designed for SDMT 09T3 indexable inserts and specified as compatible with inserts from ZCC, the tool fits existing insert inventories and makes retooling straightforward. The modest mass (0.253 kg) and standardised thread mean the cutter integrates easily into modular tooling systems, simplifying logistics and inventory management. Where coolant supply is available through the spindle or holder, the internal channels make adopting this component a direct upgrade to thermal control during machining. Contact Metav Werkzeuge today to secure the Teknik Makina screw-in milling cutter with internal coolant and discuss matching insert options and holder compatibility Technical data Article number: VT242-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Label: 40mm Einschraubfräser SDMT 09T3 L69mm mit Innenkühlung eClass: 21180806 Key dimensions Diameter: 40 mm Overall length: 69 mm Thread: M16 Cutting edges: 3 Cutting-edge height: 40 mm Weight: 0.253 kg Special features Internal coolant Compatible with SDMT 09T3 indexable inserts Compatible insert manufacturer: ZCC Torx key: T15 Torx screw: M3.5x8.5 FAQ Is this cutter compatible with SDMT 09T3 inserts from other manufacturers? Compatibility is specified for SDMT 09T3 indexable inserts; the cutter is listed as compatible with ZCC inserts and will accept any SDMT 09T3 insert from manufacturers adhering to that insert geometry. Does the tool support through-coolant operation? Yes, the cutter features internal coolant channels designed to deliver cutting fluid to the insert seat, improving cooling and chip control during machining. What is the required screw and key for insert clamping? Insert clamping uses an M3.5x8.5 Torx screw tightened with a T15 Torx key, ensuring repeatable clamping torque and quick insert changes. How does the M16 thread affect holder selection? The M16 thread provides a standardised mounting interface; holders with an M16 receptacle offer secure seating and repeatable runout for stable machining. Which SKU and brand identify this tool for ordering? This component is offered as VT242-1TM by Teknik Makina, specified as a screw-in milling cutter for SDMT 09T3 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Maximise reach and flexibility with screw-in cutters
Screw-in cutters, also known as modular screw-in milling heads or threaded cutter heads, are modular milling tools with a threaded rear that are screwed into extensions or basic toolholders. They allow the tool overhang to be adapted precisely to the depth of the machining area, providing the reach and adaptability required for complex tool and mould work.
Why these modular heads are essential in deep machining
Screw-in cutters are designed so that only the front milling head needs replacing when worn, while the carrier assemblies and extensions remain in service — a setup that reduces tooling costs and simplifies logistics in production environments. Versions without internal coolant rely on external nozzles to feed coolant to the cutting zone, which is adequate for shallow, easily accessible operations but becomes ineffective for deep contours. For deep internal work the industrial standard is screw-in cutters with internal coolant: inner channels run through the connection thread right to the cutting edges, ensuring centred coolant delivery, reliable chip transport and effective heat control.
- the internal coolant supply generates the high flushing pressure necessary to evacuate chips against gravity from narrow cavities
- thermal load on the concealed cutting zone is reduced, lowering the risk of thermal damage and deformation
- improved chip evacuation prevents spalling and vibration, dramatically reducing the likelihood of tool breakage during extended overhangs
Practical benefits that improve throughput and cost-efficiency
- replaceable milling heads cut tooling expenditure and inventory complexity
- modular carrier systems and extensions reduce retooling and shorten changeover times
- reliable chip evacuation and cooling increase tool life and process stability
- consistent performance for deep cavities minimises scrap and rework
Metav as your precision partner for modular tooling
As a specialist partner, Metav brings decades of expertise and a broad offering that suits industry and workshops alike. With over 48,000 customers and a catalogue spanning more than 250,000 products, Metav combines a pragmatic supply chain from Emmerich with technical competence that helps engineers specify the right screw-in cutters and supporting extensions. If you need advice on selecting a modular screw-in milling head or determining the correct internal coolant routing for a cavity, our technical team can advise on specifications and compatibility.
In short: screw-in cutters provide modular reach, cost-effective head replacement and indispensable internal coolant performance for deep, confined machining.
FAQ
What is the difference between screw-in cutters with internal coolant and those without?
Screw-in cutters with internal coolant feature internal channels that feed coolant directly to the cutting edges via the connection thread, providing the flushing pressure required to evacuate chips from deep cavities; cutters without internal coolant rely on external nozzles and are suitable only for shallow, easily accessible operations.
How do modular screw-in milling heads reduce tooling costs?
Because the design allows only the worn front milling head to be replaced while the carrier and extensions remain in use, modular screw-in milling heads lower component consumption and simplify inventory management, leading to clear cost savings over time.
Which machining scenarios require threaded cutter heads with internal coolant?
Threaded cutter heads with internal coolant are essential when machining deep bores, cavities or internal contours where chips must be transported out against gravity and where external coolant cannot reach the cutting zone reliably.
Can long extensions be used with screw-in cutters without compromising chip evacuation?
Long extensions are feasible, but reliable chip evacuation under long overhangs depends on internal coolant delivery; without it, external coolant will often be blocked by deep part walls and chip clogging becomes a significant risk.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com