850-925mm Measuring Plate Stand With Three Supports, Two Anti‑Tilt Locks - Filetta

Organised, secure storage with three drawers and an included lock improves workshop efficiency; the compact footprint (610 × 480 × 470 mm) is tailored to measuring benches. Order the Filetta MS131.113 via Metav Werkzeuge or contact our consultants for specification guidance. MS131.113 under-table cabinet — three-drawer unit by Filetta, compact footprint and secure locking The MS131.113 is an under-table cabinet designed for measuring benches and workshop use, providing secure, organised storage for tools and accessories close to the work surface Three drawers for organised tool storage Lock and fixings included for secure mounting Compact dimensions 610 × 480 × 470 mm Keep tools organised and within reach The under-table storage module offers three drawers sized to keep measuring tools and fixtures organised, reducing time spent searching for equipment and supporting continuous workflows. With a compact footprint of 610 × 480 × 470 mm, the unit fits neatly beneath a bench or alongside a measuring table, conserving floor space while maintaining immediate access to essentials. The layout supports clear separation of items, which simplifies calibration routines and daily checks. Designed for measuring benches and precision workflows Engineered for integration with a measuring bench, the cabinet aligns with typical workshop setups used in inspection and quality-control areas. The configuration helps preserve the order of gauges, stands and small instruments used during measurement tasks, so inspection cycles proceed more smoothly. By positioning storage at the bench, handling times are reduced and work routines become more efficient, contributing to reliable throughput in production or lab environments. Secure mounting and practical delivery contents Delivery includes a lock and the necessary fixings, enabling secure attachment to the bench or floor and providing theft protection for valuable instruments. The included fixings simplify installation and remove the need for additional mounting purchases, accelerating commissioning. The locking feature supports safe storage of calibrated items between shifts, helping maintain traceability and protecting investment in precision equipment. For secure, compact workshop storage choose the Filetta MS131.113 under-table cabinet—contact Metav Werkzeuge for ordering assistance or technical advice and benefit from local supply and expertise from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS131.113 Product: Under-table cabinet Brand: Filetta Dimensions: 610 × 480 × 470 mm Accessories included: Lock and fixings Special feature: 3 drawers Category: Measuring table (Messtisch) Facts Number of drawers: 3 Dimensions (W × D × H): 610 × 480 × 470 mm Special features Lock included Fixings included for mounting Designed for use with measuring benches (Messtisch) FAQ Is this cabinet suitable for mounting under a measuring bench? Yes. The Filetta MS131.113 under-table cabinet is designed to fit standard measuring benches and to provide convenient storage beneath the work surface. What are the exact dimensions of the unit? The cabinet measures 610 × 480 × 470 mm (width × depth × height), making it compact enough for most inspection and workshop tables. Does the delivery include a lock and mounting parts? Yes. Delivery of the MS131.113 includes a lock and the required fixings for secure mounting. How many drawers are provided and how does that help workshop organisation? The unit offers three drawers, which support separation of tools and gauges to speed up inspection routines and reduce handling time. Can the cabinet secure calibrated instruments between shifts? The integrated lock and sturdy construction of the Filetta MS131.113 enable secure storage of calibrated items, helping to protect instruments and maintain traceability. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of a secure anti-slip solution that is compatible with large measuring plates and speeds up setup time; the combination of improved measurement repeatability, robust plate-frame compatibility and simple fitting supports reliable inspection routines. Order the unit via Metav Werkzeuge or request consultant advice for integration into existing metrology benches. Rutschsicherung — Anti-slip device for measuring plate frames, compatible with 1000×1000×100–150 mm plates (Filetta) Rutschsicherung provides a secure bearing that prevents lateral movement of measuring plates on plate frames and supports precise, repeatable positioning in workshop and inspection environments Secure anti-slip surface for measuring plates Designed for 1000×1000×100–150 mm plates Simple installation on plate frames Enhances measurement repeatability Secure base for consistent, repeatable measurements A dedicated anti-slip bearing reduces micro‑movements that otherwise introduce scatter into dimensional checks. By stabilising the measuring plate on the support frame, the device contributes directly to improved measurement repeatability and fewer retests in standard inspection routines. The function is particularly valuable in metrology and inspection stations where even small lateral shifts can affect tolerance assessments and traceability records. Built for plate-frame compatibility and fast fitting Engineered to match measuring plates with dimensions 1000×1000×100–150 mm, the unit integrates with common plate-frame geometries used in metrology tables. The straightforward mounting concept shortens setup time and reduces fixture adjustments between measurements, which translates into higher throughput for repetitive checks. Compatibility with standard plate formats also eases inventory management for workshops and quality labs. Workflow benefits and integration into inspection benches The device is intended for industrial metrology and messtisch applications where stability equals confidence in results. Its contribution to a reproducible measuring environment reduces rework and supports a smoother production flow. Sourcing through a specialist partner assures product traceability and consistent delivery quality, reinforcing the workshop’s capability to maintain steady inspection quality across shift changes. Contact Metav Werkzeuge for procurement details and to confirm compatibility with existing plate frames and metrology benches Technical Data Article number: MS131.130 Product: Rutschsicherung Suitable for: measuring plates 1000×1000×100/150 mm Manufacturer: Filetta Facts Compatible plate size: 1000×1000×100–150 mm Special features Anti-slip function for plate stabilisation For mounting on measuring plate frames Improves repeatable positioning during inspections FAQ What is the primary purpose of this anti-slip device? The anti-slip device secures measuring plates to the support frame to prevent lateral movement and to improve repeatability during inspection routines with measuring plates sized 1000×1000×100–150 mm. Is the anti-slip device compatible with other plate sizes? The product is specified for measuring plates with dimensions 1000×1000×100–150 mm; compatibility with other sizes depends on frame geometry and should be checked prior to procurement. How does the anti-slip device affect measurement throughput? By reducing the need for position corrections and repeat measurements, the device contributes to faster setup and higher throughput in routine inspection processes. Can the anti-slip unit be retrofitted to existing messtisch frames? Retrofitting is typical where frame geometry matches the device’s mounting concept; technical checks are recommended to confirm fit on existing assemblies. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Secure measurement plates reliably with targeted slip protection that matches 1200 x 800 x 120/150 mm plates; the simple fitting reduces setup time and improves repeatability on measuring plate stands. Order directly via Metav Werkzeuge or consult our specialists for application checks. Anti-slip pad for measuring plate stands — compatible with 1200 x 800 x 120/150 mm (Filetta) The Anti-slip pad provides secure, non-slip support for measuring plates on stands and frames, designed specifically for plates with dimensions 1200 x 800 x 120/150 mm Prevents plate movement during inspection Fits 1200 x 800 mm measuring plates Simple retrofit for standard stands Secure, slip-resistant contact surface Stable support for repeatable measurements The anti-slip solution increases repeatability by preventing lateral movement of the measurement plate during inspection and assembly tasks. By creating a defined interface between the plate and its support, the accessory reduces micro‑shifts that can lead to measurement scatter and rework. The direct effect is a more reliable measuring process, with fewer interruptions for realignment and a clearer traceability of measurement conditions. Fast compatibility checks and straightforward fitting Designed to match measuring plates with the dimensions 1200 x 800 x 120/150 mm, the pad allows quick verification of fitment on common plate stands. The product supports straightforward retrofitting on existing stands and frames, enabling immediate integration into workshop workflows. This compatibility reduces downtime and avoids the need for custom adapters, making the component a pragmatic addition to standard inspection setups. Safer handling and improved inspection workflow Integrating slip protection into the support system contributes to a calmer inspection environment and lowers the risk of accidental plate displacement during handling. The presence of a defined, slip-resistant contact layer helps maintain alignment during probing and optical checks, which in turn supports consistent measurement outcomes and a smoother quality assurance sequence. For tailored compatibility advice and prompt delivery from Emmerich, contact Metav Werkzeuge — our consultants will confirm fit and application for Filetta anti-slip pads Technical data Article number: MS131.129 Brand: Filetta Suitable for measuring plates: 1200 x 800 x 120/150 mm Data Fits plate dimensions: 1200 x 800 x 120/150 mm Category: Measuring table Special features Slip-resistant contact surface For measuring plate stands and frames Manufacturer: Filetta FAQ How does the anti-slip pad improve measurement accuracy? The anti-slip pad reduces micro-movements between the plate and stand, improving repeatability and lowering the chance of measurement errors when using Filetta MS131.129. Is the pad compatible with other plate sizes? This model is specified for 1200 x 800 x 120/150 mm measuring plates; compatibility with other sizes requires verification against the stand geometry. Can the pad be fitted to existing stands without modification? In most cases, the pad is designed for retrofit on standard stands and frames; checking the stand interface dimensions ensures proper seating for the Filetta product. Does the pad affect probing or tactile measurement methods? The slip-resistant contact layer is intended to stabilise the plate without impeding access for probes or contact sensors during inspection routines. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com