900–975mm Measuring Plate Stand With 3 Supports, Tilt Locks And Metal‑Fitted Feet - Filetta

Organised, secure storage with three drawers and an included lock improves workshop efficiency; the compact footprint (610 × 480 × 470 mm) is tailored to measuring benches. Order the Filetta MS131.113 via Metav Werkzeuge or contact our consultants for specification guidance. MS131.113 under-table cabinet — three-drawer unit by Filetta, compact footprint and secure locking The MS131.113 is an under-table cabinet designed for measuring benches and workshop use, providing secure, organised storage for tools and accessories close to the work surface Three drawers for organised tool storage Lock and fixings included for secure mounting Compact dimensions 610 × 480 × 470 mm Keep tools organised and within reach The under-table storage module offers three drawers sized to keep measuring tools and fixtures organised, reducing time spent searching for equipment and supporting continuous workflows. With a compact footprint of 610 × 480 × 470 mm, the unit fits neatly beneath a bench or alongside a measuring table, conserving floor space while maintaining immediate access to essentials. The layout supports clear separation of items, which simplifies calibration routines and daily checks. Designed for measuring benches and precision workflows Engineered for integration with a measuring bench, the cabinet aligns with typical workshop setups used in inspection and quality-control areas. The configuration helps preserve the order of gauges, stands and small instruments used during measurement tasks, so inspection cycles proceed more smoothly. By positioning storage at the bench, handling times are reduced and work routines become more efficient, contributing to reliable throughput in production or lab environments. Secure mounting and practical delivery contents Delivery includes a lock and the necessary fixings, enabling secure attachment to the bench or floor and providing theft protection for valuable instruments. The included fixings simplify installation and remove the need for additional mounting purchases, accelerating commissioning. The locking feature supports safe storage of calibrated items between shifts, helping maintain traceability and protecting investment in precision equipment. For secure, compact workshop storage choose the Filetta MS131.113 under-table cabinet—contact Metav Werkzeuge for ordering assistance or technical advice and benefit from local supply and expertise from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS131.113 Product: Under-table cabinet Brand: Filetta Dimensions: 610 × 480 × 470 mm Accessories included: Lock and fixings Special feature: 3 drawers Category: Measuring table (Messtisch) Facts Number of drawers: 3 Dimensions (W × D × H): 610 × 480 × 470 mm Special features Lock included Fixings included for mounting Designed for use with measuring benches (Messtisch) FAQ Is this cabinet suitable for mounting under a measuring bench? Yes. The Filetta MS131.113 under-table cabinet is designed to fit standard measuring benches and to provide convenient storage beneath the work surface. What are the exact dimensions of the unit? The cabinet measures 610 × 480 × 470 mm (width × depth × height), making it compact enough for most inspection and workshop tables. Does the delivery include a lock and mounting parts? Yes. Delivery of the MS131.113 includes a lock and the required fixings for secure mounting. How many drawers are provided and how does that help workshop organisation? The unit offers three drawers, which support separation of tools and gauges to speed up inspection routines and reduce handling time. Can the cabinet secure calibrated instruments between shifts? The integrated lock and sturdy construction of the Filetta MS131.113 enable secure storage of calibrated items, helping to protect instruments and maintain traceability. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of a stable, low-maintenance anti-slip solution that secures measuring plates while maintaining repeatability in routine inspection tasks; compatible with 800 x 500 x 100 mm plates and supplied by Filetta. Order the anti-slip guard directly via Metav Werkzeuge or ask the consultants for specification support. Anti-slip guard for measuring plate frames by Filetta — fits 800 x 500 x 100 mm The anti-slip guard is a retrofit accessory designed to prevent lateral movement of measuring plates and to improve the reliability of measurements on a measuring table. Secure anti-slip contact for measuring plates Compatible with 800 x 500 x 100 mm plates Suitable for measuring table frames Improved measurement reliability through stable contact The primary benefit of the anti-slip guard lies in its capacity to reduce micro-movements between the measuring plate and its support. By increasing the friction interface where the plate rests, the accessory improves repeatability of successive measurements and minimises rework caused by shifting parts. For metrology teams and workshop quality control, this translates into fewer measurement rejects and a more predictable inspection workflow. The solution is particularly relevant where plates are handled frequently or where small shifts can exceed tolerance bands. Practical integration into the measuring table workflow Designed for use with plates sized 800 x 500 x 100 mm, the guard integrates with common measuring table frames without demanding complex modifications. Installation is straightforward and focuses on mechanical fixing points on the plate frame; thread and mounting details depend on the specific table design. As a result, the measure of effort to retrofit the accessory remains low while the operational gain — stable part positioning on the measuring table — is immediate. The compact form factor keeps the working surface unobstructed and maintains accessibility for standard inspection tools. Productivity gains and quality assurance advantages Adopting this anti-slip solution supports faster setup times and a reduction in incidental errors during tactile or optical measurement processes. The emphasis on stable fixturing supports consistent datum alignment and therefore contributes directly to measurement confidence. In a production environment the accessory enhances throughput by lowering the incidence of repeated measurements and by shortening inspection cycles. The supplied SKU MS131.125 identifies the exact item and facilitates procurement and traceability in inventory systems. Contact Metav Werkzeuge today for Filetta anti-slip guards compatible with 800 x 500 x 100 mm measuring plates — expert ordering assistance and specification advice available by email or phone from Emmerich. Technical data SKU: MS131.125 Article: Anti-slip guard Manufacturer: Filetta Category: Measuring table Suitable for measuring plates: 800 x 500 x 100 mm Facts Compatible plate dimension: 800 x 500 x 100 mm SKU identifier: MS131.125 Special features For measuring plate frames Anti-slip function for improved repeatability Retrofit-friendly design FAQ What plate sizes is the anti-slip guard compatible with? The anti-slip guard is designed for measuring plates with the dimension 800 x 500 x 100 mm and is supplied under SKU MS131.125 by Filetta. Will the accessory affect the measuring surface or reference points? No — the anti-slip guard secures the plate to the frame without altering the measuring surface; Filetta designed the unit to maintain existing reference geometry while reducing lateral movement. Can the anti-slip guard be retrofitted to any measuring table frame? The guard is intended for standard measuring table frames; compatibility with bespoke fixtures should be checked against the SKU MS131.125 mounting arrangement before installation. How does the anti-slip guard improve inspection throughput? By preventing plate movement, the guard increases repeatability and reduces the need for re-measurement, which shortens inspection cycles and supports steadier production yields. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of a secure, non-slip support that is matched to the common measuring plate size 900 x 600 x 100 mm and designed to improve repeatability on inspection tables; order the anti-slip protection directly via Metav Werkzeuge or consult Metav’s specialists for tailored advice. Anti-slip protection for measuring plate frames — compatible with 900 x 600 x 100 mm plates | Filetta The Anti-slip protection for measuring plate frames provides a stable interface for measuring plates and inspection tables, preventing unwanted movement during setup and measurement tasks while fitting standard frame designs. Secure anti-slip interface for measuring plates Designed for 900 x 600 x 100 mm plates Robust fit for measuring table frames Secure foundation for consistent measurements A stable base reduces variability in every measurement operation: the anti-slip device creates a controlled contact layer between the measuring plate and its frame, lowering the risk of lateral movement and therefore improving repeatability in routine checks. Matched specifically to the 900 x 600 x 100 mm plate geometry, the component is intended for metrology environments where consistent positioning influences traceable results. Designed for use on measuring tables and inspection stands, it supports accurate alignment without altering the plate geometry or clamping strategy. Seamless integration with frames and stands to speed setup Installation is conceived as a straightforward positioning on the plate frame so that time spent on alignment and re‑adjustment is reduced and throughput is increased. The solution is compatible with common measuring table constructions and support stands, providing a robust fit that limits micro‑shifts during probe contact or manual handling. As a practical accessory in a workshop or inspection bay, it contributes to smoother process flows and fewer repeat measurements, which in turn supports productivity and operational reliability. Durable support that protects components and workflow Built to serve as a repeatable interface, the anti-slip protection reduces abrasion and protects the plate surface during routine use and handling. The product’s role in minimising rework and stabilising setups makes it a simple, cost‑effective measure to safeguard quality gates in assembly and inspection operations. Supplied by a specialist metrology brand and distributed through Metav’s quality filter in Emmerich, the part is intended to integrate into established measurement routines and to support dependable material handling across shifts. Contact Metav Werkzeuge for guidance on integrating the Filetta anti-slip solution MS131.126 into existing measuring table setups and for supply details via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: MS131.126 Manufacturer: Filetta Product name: Anti-slip protection Suitable for: measuring plates 900 x 600 x 100 mm Category: Measuring table Numbers / Core technical data Compatible plate dimensions: 900 x 600 x 100 mm Designs / Special features Anti-slip surface for plate-to-frame contact Intended for measuring plate frames and stands Suitable for inspection table applications FAQ Is this anti-slip protection compatible with plates other than 900 x 600 x 100 mm? The anti-slip protection is manufactured for measuring plates sized 900 x 600 x 100 mm; compatibility with other sizes is limited and may require a different accessory. How does the anti-slip protection improve measurement repeatability? By providing a non-slip interface between the plate and its frame, the accessory reduces lateral movement and micro-shifts, which helps maintain repeatability during probing and visual inspections with the Filetta anti-slip protection MS131.126. Can the anti-slip protection be used on any measuring table frame? The design is intended for typical measuring table frames and supports; it fits standard frame geometries used for inspection tables and stands, ensuring a robust fit where plate dimensions match. Does the product include mounting hardware? The Filetta anti-slip protection MS131.126 is supplied as the anti-slip component itself; any additional fastenings or frame-specific adapters are not included unless stated separately by the supplier. Who distributes this anti-slip protection in Europe? The anti-slip protection MS131.126 is distributed via Metav Werkzeuge and specialist metrology channels for reliable supply and quality assurance. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of a compact, reliable anti-slip solution that secures measurement plates with the dimensions 1000 x 630 x 100/150 mm, reduces lateral movement during set-up and inspection, and integrates easily with measurement plate frames and stands. Order the anti-slip device directly via Metav Werkzeuge or ask our consultants if needed. Anti-slip device for measurement plate frames by Filetta — fits 1000 × 630 mm plates A anti-slip device designed to hold measurement plate frames steady on workshop stands and inspection rigs, optimising repeatable set-ups for metrology tasks. Secure hold for 1000 x 630 mm measurement plates Designed for measurement plate frames and stands Robust anti-slip function for workshop environments Improved measurement repeatability through secure support A stable support surface is a prerequisite for precise inspection. The anti-slip device prevents unwanted lateral shift of the measurement plate, which reduces measurement scatter and the need for repeat runs. By limiting micro-movements during tactile or optical probing, the component supports consistent contact conditions and therefore enhances repeatability across multiple operations. This makes the solution particularly useful where fixed-fixture accuracy feeds directly into quality decisions. Fast, straightforward fitment for workshop workflows Fitting is engineered for practicality: the design integrates with existing measurement plate frames and associated stands, allowing teams to prepare jigs and plates quickly and return to production without lengthy rework. The compact format minimises set-up time while maintaining the required clamping stability. As a result, cycle times for inspection and alignment tasks are shortened and workshop throughput benefits from fewer interruptions and faster batch checks. Protects test routines without complex adjustments The device preserves the alignment and reference plane of the measurement plate during both static and dynamic checks. Because it is purpose-built for measurement plate frames, there is no need for additional fixtures or bespoke adaptors for the specified plate size. This focused compatibility reduces the scope for operator error and keeps the test procedure lean—improving the overall efficiency of calibration and quality-assurance workflows. Supply reliability and the Metav advantage Sourcing this Filetta anti-slip solution through Metav leverages a dependable European supply chain and hands-on specialist support from a supplier experienced in precision metrology. Metav’s offering aims to make high-precision accessories accessible across workshops and small production facilities, ensuring consistent availability and a straightforward procurement path. The practical combination of compatibility, quick fitment and supply reliability supports stable, long-term measurement processes. Contact Metav Werkzeuge for tailored advice on the Filetta anti-slip device and ensure measurement plate frames are secured precisely and promptly Technical Data Article number: MS131.127 Manufacturer: Filetta Category: Messtisch Facts Compatible plate dimensions: 1000 x 630 x 100/150 mm Intended use: Measurement plate frames and stands Special features Anti-slip function for measurement plate frames Designed for workshop and inspection environments Integrates with measurement plate stands FAQ Which plate dimensions are supported? The anti-slip device is designed for measurement plates sized 1000 x 630 x 100/150 mm (Filetta, SKU MS131.127). Can it be used with measurement plate frames and stands? Yes, the device is intended for use with measurement plate frames and compatible stands to provide stable support during inspection tasks. Will the anti-slip device improve repeatability? Yes, by preventing lateral movement of the plate, the device helps reduce variation between successive measurements and supports repeatable test conditions. Is this Filetta accessory suitable for workshop use? The design accommodates typical workshop and inspection environments where measurement plates are mounted on frames or stands. How is the item identified for ordering? Refer to SKU MS131.127 (Filetta) when enquiring or ordering through Metav Werkzeuge Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com