850-925mm Measuring Table Stand With Three Supports, Tilt Locks And Metal-Capped Feet - Filetta

Organised, secure storage with three drawers and an included lock improves workshop efficiency; the compact footprint (610 × 480 × 470 mm) is tailored to measuring benches. Order the Filetta MS131.113 via Metav Werkzeuge or contact our consultants for specification guidance. MS131.113 under-table cabinet — three-drawer unit by Filetta, compact footprint and secure locking The MS131.113 is an under-table cabinet designed for measuring benches and workshop use, providing secure, organised storage for tools and accessories close to the work surface Three drawers for organised tool storage Lock and fixings included for secure mounting Compact dimensions 610 × 480 × 470 mm Keep tools organised and within reach The under-table storage module offers three drawers sized to keep measuring tools and fixtures organised, reducing time spent searching for equipment and supporting continuous workflows. With a compact footprint of 610 × 480 × 470 mm, the unit fits neatly beneath a bench or alongside a measuring table, conserving floor space while maintaining immediate access to essentials. The layout supports clear separation of items, which simplifies calibration routines and daily checks. Designed for measuring benches and precision workflows Engineered for integration with a measuring bench, the cabinet aligns with typical workshop setups used in inspection and quality-control areas. The configuration helps preserve the order of gauges, stands and small instruments used during measurement tasks, so inspection cycles proceed more smoothly. By positioning storage at the bench, handling times are reduced and work routines become more efficient, contributing to reliable throughput in production or lab environments. Secure mounting and practical delivery contents Delivery includes a lock and the necessary fixings, enabling secure attachment to the bench or floor and providing theft protection for valuable instruments. The included fixings simplify installation and remove the need for additional mounting purchases, accelerating commissioning. The locking feature supports safe storage of calibrated items between shifts, helping maintain traceability and protecting investment in precision equipment. For secure, compact workshop storage choose the Filetta MS131.113 under-table cabinet—contact Metav Werkzeuge for ordering assistance or technical advice and benefit from local supply and expertise from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS131.113 Product: Under-table cabinet Brand: Filetta Dimensions: 610 × 480 × 470 mm Accessories included: Lock and fixings Special feature: 3 drawers Category: Measuring table (Messtisch) Facts Number of drawers: 3 Dimensions (W × D × H): 610 × 480 × 470 mm Special features Lock included Fixings included for mounting Designed for use with measuring benches (Messtisch) FAQ Is this cabinet suitable for mounting under a measuring bench? Yes. The Filetta MS131.113 under-table cabinet is designed to fit standard measuring benches and to provide convenient storage beneath the work surface. What are the exact dimensions of the unit? The cabinet measures 610 × 480 × 470 mm (width × depth × height), making it compact enough for most inspection and workshop tables. Does the delivery include a lock and mounting parts? Yes. Delivery of the MS131.113 includes a lock and the required fixings for secure mounting. How many drawers are provided and how does that help workshop organisation? The unit offers three drawers, which support separation of tools and gauges to speed up inspection routines and reduce handling time. Can the cabinet secure calibrated instruments between shifts? The integrated lock and sturdy construction of the Filetta MS131.113 enable secure storage of calibrated items, helping to protect instruments and maintain traceability. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of secure positioning and reduced measurement uncertainty through a purpose-built anti-slip solution for measuring plate frames; its compatibility with common plate formats and straightforward retrofitting keeps inspection workflows efficient. Order or request specification support via Metav Werkzeuge for reliable delivery and technical advice. Anti-slip for measuring plate frames — secure support for industrial measuring plates (Filetta) The Anti-slip for measuring plate frames provides slip-resistant support for measuring plates used on inspection benches and messtables across manufacturing and metrology environments. Fits 1500×1000×150/200 mm measuring plates Compatible with 2000×1000×200/250 mm plates Prevents lateral movement during inspection Stable support that improves measurement reliability The primary benefit is a visible reduction in lateral movement during setup, delivered by a slip-resistant contact interface that maintains the plate position under normal handling and probing forces. This stability directly contributes to improved measurement accuracy and repeatability, since uncontrolled micro‑shifts at the workpiece interface are a common source of measurement scatter. The design focuses on secure seating rather than permanent fixturing, so repeat measurements remain comparable while handling remains flexible for inspection sequences. Compatibility that minimises installation time Designed for quick integration with common measuring plate formats, the unit supports 1500×1000×150/200 mm and 2000×1000×200/250 mm plates used on standard messtables. The compact footprint and straightforward mounting concept enable retrofitting to existing measurement plate frames with minimal downtime, preserving workshop throughput. The compatibility with typical industrial plate dimensions ensures that calibration jigs and inspection setups need few adjustments, safeguarding process continuity during upgrades or replacement cycles. Robust design for the workshop environment Built for continuous use in inspection and production areas, the component provides a durable contact surface that resists wear while maintaining its slip resistance properties over repeated cycles. Delivered under the Filetta brand, the product is intended for integration into measurement benches and inspection fixtures where handling speed and positional security matter. Supply via an established distributor acts as a quality filter for the European market, supporting consistent availability and predictable integration into existing metrology fleets. Contact Metav Werkzeuge in Emmerich for tailored guidance on Filetta anti-slip solutions and to request technical specifications or a quotation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: MS131.128 Manufacturer: Filetta Category: Messtisch Facts Compatible plate size: 1500 × 1000 × 150/200 mm Compatible plate size: 2000 × 1000 × 200/250 mm SKU: MS131.128 Special features Slip-resistant support for measuring plate frames Designed for inspection benches and messtables Simple retrofit installation FAQ How does the anti-slip unit affect measurement accuracy? The anti-slip unit for measuring plate frames reduces lateral movement at the plate interface and therefore lowers one common source of measurement variability; the Filetta anti-slip supports improved repeatability during inspection runs. Which plate sizes are supported by this solution? Supported formats include 1500×1000×150/200 mm and 2000×1000×200/250 mm, matching common industrial measuring plates for messtables and inspection benches. Can the anti-slip be retrofitted to existing measuring plate frames? Yes, the design permits straightforward retrofit to standard measuring plate frames, allowing integration into existing inspection setups with minimal adjustment. Is the unit suitable for continuous workshop use? The product is intended for industrial inspection environments and provides a durable, slip-resistant contact surface designed to withstand repeated handling and routine measurement cycles. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com