Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a narrow 2.45 mm kerf and a 21.4 mm effective cutting height for clean, material‑saving parting cuts; the 110 mm shank length adds rigidity for repeatable cycles. Order the tool directly via Metav Werkzeuge or consult the technical advisors for holder pairing and insert selection. Parting Blade KL23TM – compatible with GTN 3 inserts, 2.45 mm blade width A Parting Blade KL23TM designed for precision parting and grooving in CNC turning applications, compatible with GTN 3 indexable inserts for fast tool changes Compatible with GTN 3 indexable inserts 2.45 mm blade width for narrow kerfs 21.4 mm effective cutting height 110 mm shank length for improved stability Accurate parting that reduces waste and rework The slim 2.45 mm blade profile delivers a narrow kerf that minimises material loss and lowers the risk of binding during parting. With a cutting height of 21.4 mm, the tool covers a broad range of workpiece diameters while maintaining contact stability; this geometry reduces vibration and contributes to consistent surface finish. The design supports faster cycle times because less material is removed per pass, which can translate into measurable productivity gains on repetitive production runs. Stable shank geometry for reliable tool life A 110 mm overall shank length provides the necessary reach for many lathe setups while preserving stability in the clamping zone. The 26 mm blade height offers a robust interface with standard parting holders and helps to maintain correct alignment under cutting forces. Compatibility with GTN 3 indexable inserts simplifies replenishment and reduces downtime: worn inserts are exchanged quickly without altering the holder, helping to keep machining accuracy and repeatability high over long production runs. Workshop-friendly integration and procurement benefits The parting blade is engineered for straightforward integration into common holder families used in turning shops and subcontract machining. Its compatibility with GTN 3 inserts means stock-keeping is simplified and insert changeover is rapid, reducing setup time between jobs. Sourcing the component through Metav centralises supply and benefits from a tested quality filter based in Emmerich, ensuring consistent product standards and reliable delivery for routine reordering or sudden production needs. Contact Metav Werkzeuge today to confirm holder compatibility and to order the Teknik Cutting Tools Parting Blade KL23TM (GTN 3 compatible) via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KL23TM Product name: Parting blades (Stechschwerter) Manufacturer: Teknik Makina Facts Blade width: 2.45 mm Cutting height (effective): 21.4 mm Blade/shank height: 26 mm Overall length: 110 mm Compatible inserts: GTN 3 Special features Designed for CNC turning parting operations Fast indexable insert replacement with GTN 3 Robust shank for reduced vibration and improved repeatability FAQ What insert type fits this parting blade? The parting blade KL23TM is compatible with GTN 3 indexable inserts and is designed for quick insert changes without modifying the holder. Which dimensions are critical for holder selection? Key dimensions are the 2.45 mm blade width, 21.4 mm effective cutting height and 110 mm overall length; these determine holder fit and clearance. Is the KL23TM suitable for high‑volume production? Yes, the KL23TM’s narrow kerf and stable shank geometry promote repeatable parting cycles, making it suitable for high‑volume turning where consistent tool life is important. How does GTN 3 compatibility benefit workshop logistics? GTN 3 compatibility standardises insert types across multiple tools, simplifying inventory and enabling faster swaps to reduce machine downtime. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of stable cutting geometry, compact dimensions and straightforward integration for reliable parting operations on the shop floor; order the parting blades directly via Metav Werkzeuge or consult our specialists for application-specific advice. Parting blades — precision parting blade, 26 mm height · 110 mm length (Teknik Makina) The Parting blades deliver rigid, repeatable cut-off performance for industrial turning and lathe parting applications, designed to be clamped into standard parting toolholders for workshop and production environments 26 mm blade height for stable cutting 110 mm overall length for secure clamping 21.4 mm cutting height for deep parting Suitable for industrial turning applications Increased process stability through optimised geometry The blade’s 26 mm profile increases stiffness where it matters, reducing vibration and the risk of tool chatter during the cut. A higher section cross‑section keeps the active edge aligned with the toolholder so that the cutting height remains consistent from part to part; this is particularly relevant when performing repetitive parting or cut‑off operations. By specifying a 21.4 mm cutting height, the design clarifies the maximum useful engagement of the blade—helpful when matching the tool to the workpiece diameter and machining strategy. These dimensional details translate into fewer rejects and more predictable set‑ups on the shop floor. Easy integration into turning workflows for faster changeovers With an 110 mm overall length, the blade offers enough engagement to be secured firmly in clamping systems while keeping the exposed length manageable for clearance and chip control. The profile is intended for simple clamping rather than complex re‑tooling, which reduces setup time and helps maintain machine availability. For teams moving between long and short runs, the combination of compact length and defined cutting height supports quick swaps and repeatable positioning, enabling predictable cycle times and smoother production scheduling. Consistent quality that supports productivity and material savings A blade that maintains its geometry during operation helps deliver consistent part faces and repeatable separation, lowering scrap rates and downstream rework. The robust cross‑section supports steady cutting conditions, which conserves machine time and contributes to overall shop efficiency. Supplied under the Teknik Makina designation, the blade is a practical option where reliable parting performance is required; pairing this tool with the right toolholder and cutting parameters will maximise consistency and throughput. Contact Metav Werkzeuge today to discuss Teknik Makina parting blades (SKU KL76TM) and secure the right specification for precise lathe parting from our Emmerich stock — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: KL76TM Manufacturer: Teknik Makina eClass: 21181018 Dimensions Blade height: 26 mm Overall length: 110 mm Cutting height: 21.4 mm Product details Product type: Parting blades Category: Zerspanen > Stechschwerter Label: Stechschwerter FAQ What are the exact dimensions of the blade? The parting blades have a blade height of 26 mm, an overall length of 110 mm and a cutting height of 21.4 mm (SKU KL76TM, Teknik Makina). Which machining tasks are these blades intended for? These blades are designed for lathe parting and cut‑off operations in industrial turning applications and are suitable where controlled, repeatable separations are required. How deep can the blade cut in a single pass? The specified cutting height of 21.4 mm indicates the maximum useful engagement; actual depth depends on workpiece material and machining parameters. How are the blades mounted in the machine? The blades are clamped into standard parting toolholders; secure clamping and correct alignment ensure stable cutting performance and repeatability. Are these blades suitable for production use? Yes—Teknik Makina parting blades (SKU KL76TM) are intended for industrial turning environments where consistent parting quality and reliable performance support production throughput. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise parting with a 26 mm blade height and a slim 2.45 mm cutting width for fine, controlled cut-off work; compatibility with Sandvik N151-3 inserts ensures quick changeover and reduced setup time. Order the parting blade directly via Metav Werkzeuge or ask our consultants if needed. Parting Blade KL52TM — Teknik Makina, 26 mm blade height, Sandvik N151-3 compatible The Parting Blade KL52TM is an insert-mounted parting tool designed for precision grooving and cut-off operations in turning applications, offering steady tool engagement and easy insert replacement. 26 mm blade height for deep grooves 2.45 mm cutting width for fine parting 110 mm overall length for secure clamping Compatible with Sandvik N151-3 inserts High-precision cut-off performance that keeps cycles consistent The combination of a 26 mm blade height and a 21.4 mm effective cut height delivers a controlled engagement depth that supports repeatable parting operations. This geometry reduces deflection during the cut and contributes to consistent surface quality and dimensional accuracy. By specifying a slim 2.45 mm cutting width, the design minimises material waste while enabling close shoulder work; the result is efficient material use and predictable cycle times for production runs. Robust length and shape for stable clamping and reduced vibration An overall 110 mm length gives the toolholder favourable support within common toolpost arrangements, improving stability during abrupt cut-off motions. The extended shank length helps maintain alignment under load and lowers the likelihood of chatter, which in turn can prolong insert life and lower rework rates. Stability-focused geometry like this is particularly valuable in series production where tool integrity directly affects throughput and machine uptime. Straightforward interchangeability with industry-standard inserts Designed to accept Sandvik N151-3 inserts, the tool supports rapid insert changes and broad aftermarket availability, simplifying stock handling and reducing lead times for consumables. Compatibility with a well-known insert family enables flexible tooling strategies: inserts can be selected for finish, wear resistance or cost-efficiency without changing the blade. This approach streamlines logistics and supports a pragmatic maintenance regime for the workshop. Practical application overview and advisory support The blade is intended for precision grooving and parting-off tasks on lathes where insert-mounted solutions are preferred for quick servicing and predictable tool life. For specific clamping setups or recommendations on insert grades and cutting parameters, Metav Werkzeuge’s advisers can provide tailored guidance and help integrate the blade into existing tooling systems. This ensures the tool performs reliably within the chosen machining process and contributes to a smoother production flow. For specification advice or to secure supply of the KL52TM parting blade from Teknik Makina, contact Metav Werkzeuge in Emmerich for prompt technical consultation and delivery: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: KL52TM Manufacturer: Teknik Makina eClass: 21181018 Core measurements Blade height: 26 mm Cutting height: 21.4 mm Blade width: 2.45 mm Overall length: 110 mm Compatibility & features Compatible with Sandvik N151-3 inserts Suitable for insert-mounted parting and grooving FAQ What insert type does this blade accept? The parting blade accepts Sandvik N151-3 inserts, enabling standardised, quick insert changes for consistent machining. Is the KL52TM suitable for deep grooving on standard lathes? Yes, the KL52TM offers a 26 mm blade height and a 21.4 mm cutting height which support deeper groove requirements within appropriate clamping limits. How does the blade width affect material removal? A 2.45 mm cutting width reduces material waste and allows precise parting operations while maintaining sufficient strength for controlled cuts. Can inserts be sourced easily for this blade? Inserts matching Sandvik N151-3 are widely available from established suppliers, simplifying procurement and stocking for production environments. Who can advise on clamping and parameter settings for this blade? Metav Werkzeuge’s technical team can advise on optimal clamping and cutting parameters for the KL52TM to ensure reliable performance in specific turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact 110 mm overall length combined with ISO SDNCN 1212 compatibility and a fixed 62.5° cutting angle delivers precise external turning in tight toolings; the robust clamping geometry and simple insert interface enable stable machining and consistent surface finish. Order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder SDNCN 1212 — SDNCN tool holder for DC-- 11T3 indexable inserts, 110 mm overall length (Teknik Makina) A Clamping holder SDNCN 1212 engineered for external turning with DC-- 11T3 indexable inserts, optimised for compact setups and repeatable tool positioning SDNCN mounting for DC-- 11T3 inserts Compact 110 mm overall length 12 × 12 mm shank format for stable clamping 62.5° cutting angle for consistent chip flow Stable external turning in confined setups The SDNCN 1212 tool holder is designed to deliver consistent cutting geometry in restricted tool spaces. Its compact 110 mm overall length reduces overhang and improves rigidity, which directly benefits repeatability and dimensional stability during short-run and batch turning. By accepting standard indexable inserts of the DC-- 11T3 family, the holder shortens changeover times and minimises downtime while preserving a predictable tool path for accurate part tolerances. Rigid fit for reduced vibration and longer insert life A focused clamping cross-section of 12 × 12 mm and a narrow cutting-head width of 6 mm provide a secure seat for the insert, lowering micro-movement at the cutting edge. The defined 25 mm cutting height and fixed 62.5° approach angle help to control chip formation and heat input, which typically leads to improved surface finish and extended insert life. With a mass of 0.131 kg, the tool holder balances low inertia with structural stiffness, supporting stable spindle dynamics for short to medium-length turning operations. Quick integration and workshop-friendly specification Marked as SDNCN 1212 to match ISO tool-holder conventions, the unit fits common tool blocks and is compatible with a J11 shank designation for straightforward mounting. The straightforward design removes complex adjustments while maintaining a positive clamping face for the DC-- 11T3 inserts, enabling rapid assembly into existing turning stations. Backed by the Teknik Makina designation, the component suits workshops that prioritise compact, reliable tooling without introducing unnecessary setup complexity. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina SDNCN 1212 clamping holder into production: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: D118TM Manufacturer: Teknik Makina ISO designation: SDNCN 1212 Compatible insert type: DC-- 11T3 Facts Overall length: 110 mm Shank height: 12 mm Shank width: 12 mm Cutting-head width: 6 mm Cutting height: 25 mm Cutting angle: 62.5° Weight: 0.131 kg Features Shank designation: J11 For use with indexable inserts DC-- 11T3 SDNCN tool holder style SKU: D118TM Brand: Teknik Makina FAQ Which insert families fit the holder? The clamping holder accepts DC-- 11T3 indexable inserts; the SDNCN 1212 interface is matched to that insert geometry for secure seating and consistent cutting orientation. What are the shank and mounting dimensions? Shank dimensions are 12 × 12 mm with an overall length of 110 mm, and the holder is designated J11 for mounting compatibility with standard tool posts. How does the 62.5° cutting angle affect machining? A fixed 62.5° approach angle focuses the cutting forces and improves chip control for many external turning tasks, helping to maintain surface quality and predictable insert wear with the SDNCN 1212. Can the holder be used for high-speed turning? The SDNCN 1212’s compact geometry and low mass (0.131 kg) reduce overhang and support stable spindle dynamics; suitability for high-speed applications depends on insert grade and machine parameters. What is the ISO designation for ordering and referencing? Order and reference the part as SDNCN 1212 (SKU: D118TM) from Teknik Makina for consistent identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust left-hand clamping, standard ISO fitting and compact dimensions combine to deliver stable, repeatable turning performance with VBMT 1103 inserts; the SVJB design reduces set-up time and improves process reliability when fitted into medium-reach turning operations. Order or request application advice directly from Metav Werkzeuge for fast, expert procurement. SVJB for VBMT Indexable Inserts (SVJBL 1212) — left-hand clamping holder, 110 mm overall length — Teknik Makina The SVJB for VBMT Indexable Inserts is a left-hand clamping holder engineered for secure mounting of VBMT 1103 turning inserts in general turning and finish operations, offering standard ISO fitting and compact geometry for stable chip control Compatible with VBMT 1103 inserts Left-hand tool holder for turning 110 mm overall length for deep reach Solid clamping with a 93° cutting angle Precision clamping for consistent turning outcomes The tool holder delivers a measurable increase in process stability through a solid clamping arrangement and an engineered tool geometry that supports consistent insert seating. Compatibility with VBMT 1103 indexable inserts ensures a wide selection of carbide grades and chipbreakers can be used, allowing optimisation for both roughing and finishing. The holder’s 110 mm overall length balances access to workpieces with reduced overhang, lowering vibration and contributing to longer insert life. Geometry that improves cutting control and productivity A dedicated left-hand configuration with a 93° cutting angle concentrates cutting forces into a controlled vector, which reduces chatter and helps maintain surface finish. The holder’s compact cutting head — 16 mm width — and a cutting height of 21 mm enable predictable tool positioning and repeatable depth-of-cut results. Reduced variability in setup translates into fewer adjustments at the machine, improving throughput in small- to medium-batch production. Practical design for faster changeovers and safe handling Built to ISO reference SVJBL 1212 with shank designation J11, the holder is light and manageable at 0.141 kg, easing manual handling during tool changes and storage. A 12 mm holder height ensures a low centre of gravity in many tool posts, simplifying alignment and reducing the need for additional shims. These characteristics minimise downtime during insert changes and support reliable returns to size after each re-installation. Suited to mixed-shop workflows and repeatable results This left-hand clamping solution is appropriate for workshops requiring flexible tooling that interfaces with standard VBMT inserts and conventional tool posts. The combination of compact dimensions, ISO conformity and the Teknik Makina design philosophy gives machining centres and manual lathes a dependable option for turning tasks where repeatability and secure clamping are priorities. The straightforward specification eases procurement and inventory management across multi-machine environments. For procurement guidance or application-specific advice on this Teknik Makina SVJB clamping holder contact Metav Werkzeuge in Emmerich for direct supply and technical consultation: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D372TM Manufacturer: Teknik Makina Designation: SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1212 Core specifications Overall length: 110 mm Cutting height: 21 mm Cutting head width: 16 mm Holder height: 12 mm Weight: 0.141 kg Cutting angle: 93° Direction: left Special features For inserts: VBMT 1103 Shank designation: J11 Left-hand orientation Brand: Teknik Makina FAQ Which inserts fit this holder? The holder is specified for VBMT 1103 indexable inserts and accepts the standard insert geometry for that designation. Is the holder left- or right-hand? This tool holder is a left-hand orientation; it is designed for turning operations taking the cut in the left direction. What is the overall length and how does it affect reach? Overall length is 110 mm, offering a balance between reach and rigidity suitable for medium-reach turning tasks. What is the cutting height and why does it matter? Cutting height is 21 mm, which determines the insert tip position relative to the tool post and affects tool set-up and geometry. What ISO identification should be used for ordering and mounting? Order using the ISO designation SVJBL 1212 and check shank reference J11 for compatible tool posts and bores. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact right-hand design with a 12 × 12 mm cutting head, 93° cutting angle and a 110 mm total length for stable turning performance; combine precision, compatibility and low mass for productive machining — order through Metav Werkzeuge or consult our technical advisors for application-specific recommendations. Klemmhalter (SVJBR 1212) – Right-hand clamping holder for VBMT 1103 inserts by Teknik Makina The Klemmhalter is a right-hand clamping holder intended for turning operations using VBMT 1103 indexable inserts; designed for small- to medium-batch production and workshop use Right-hand orientation for turning operations Compatible with VBMT 1103 indexable inserts 12 × 12 mm cutting head dimensions 110 mm total length for extended reach Consistent rigidity and repeatable machining results The holder delivers mechanical stability by concentrating mass where it matters: at the cutting head. The compact 12 × 12 mm cutting head and a 22 mm cutting height are engineered to reduce vibration and maintain a consistent chip former geometry when used with VBMT 1103 inserts, which supports repeatable surface finish and dimensional control. The modest mass (approx. 0.132 kg) and the clear 93° cutting angle favour quick acceleration on CNC turrets and manual lathes alike, improving cycle times without compromising process stability. Faster insert changes and secure clamping for uptime The SVJBR 1212 designation identifies a straightforward clamping concept that prioritises safe and fast insert replacement. The toolholder accepts standard VBMT 1103 inserts and secures them reliably with a proven clamp geometry, enabling short maintenance intervals and reduced machine downtime. The shank designation J11‑F aids configuration in modular tooling systems, while the right-hand orientation aligns with common turning setups, resulting in predictable tool paths and fewer setup adjustments. Optimised for workshop and production environments With a 110 mm total length and a compact footprint, this holder is suitable where access is limited but rigidity remains essential. The combination of compact dimensions and a defined cutting geometry supports both roughing passes and small finishing cuts, making the product a practical choice for jobbers and contract manufacturers. Its lightweight construction simplifies handling during tool changes and tooling inventory management, while compatibility with established insert grades keeps spare-stock requirements minimal. For application advice on the Teknik Cutting Tools SVJBR 1212 clamping holder or to discuss suitable insert grades and machining parameters, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to receive tailored assistance and procurement support Technical data Article number: D129TM Manufacturer: Teknik Makina ISO designation: SVJBR 1212 For inserts: VBMT 1103 Facts Cutting head width: 12 mm Cutting head height: 12 mm Cutting height: 22 mm Total length: 110 mm Weight: 0.132 kg Cutting angle: 93° Direction: right-hand Special features Compatible with VBMT 1103 indexable inserts Shank designation: J11-F SVJB design for secure clamp retention FAQ Which indexable inserts fit this holder? The holder is designed for VBMT 1103 indexable inserts; the clamping geometry matches standard VBMT insert sizes used in turning. Is the holder right- or left-hand oriented? This toolholder is a right-hand clamping holder and is intended for standard right-hand turning operations. What are the key dimensions to check for turret mounting? Relevant dimensions include the 12 × 12 mm cutting head, 110 mm total length and the shank designation J11‑F for mounting compatibility. Can this holder be used for finishing passes? Yes, the combination of a 93° cutting angle and the stable clamping design makes the holder suitable for light finishing when paired with appropriate inserts. What is the SKU and manufacturer reference? The SKU is D129TM and the holder is supplied by Teknik Makina under the ISO designation SVJBR 1212. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of internal coolant, compatibility with VBMT 1103 inserts and precise right-hand cutting geometry to streamline turning operations; order the clamp holder directly via Metav Werkzeuge or request technical advice from our consultants. Teknik Makina SVJBR 1212 clamp holder — SVJB for VBMT indexable inserts, internal coolant, right-hand SVJBR 1212 clamp holder designed for right-hand turning with VBMT 1103 indexable inserts, offering internal coolant and compact dimensions for stable machining in workshop and light industrial setups Right-hand cutting orientation Internal coolant supply Compatible with VBMT 1103 inserts 110 mm overall length Consistent right-hand turning with predictable chip control The SVJBR 1212 clamping system is engineered to deliver repeatable turning results on right-hand operations. Its 93° cutting angle and defined cutting height of 32 mm set a stable geometry that reduces vibration and improves surface finish during medium-duty turning. The combination of a 16 mm cutter-head width and a compact 110 mm overall length makes the toolholder suitable for confined setups where rigidity and consistent tool projection are required. This predictable behaviour supports higher process yields and reduced scrap rates in batch production. Internal coolant for improved tool life and process reliability Built-in internal coolant directs cutting fluid close to the insert edge, cooling the contact zone and aiding chip evacuation. This targeted cooling helps to extend insert life, particularly when using VBMT 1103 grade inserts in interrupted cuts or when machining harder materials. The presence of internal coolant is a pragmatic feature for shops seeking to increase tool-change intervals and lower tooling costs per part, while maintaining cutting performance under sustained cycle times. Compact design that simplifies set-up and increases versatility With a holder width of 12 mm and a clamp height of 12 mm, the unit combines a space-saving profile with clear mechanical stability. The ISO designation SVJBR 1212 and the J11-IK mounting form ensure straightforward interchangeability with compatible boring bars and tool posts. The tool’s modest mass of 0.141 kg contributes to lower centrifugal loads at higher spindle speeds and makes handling simpler during tool changes, while the precise Torx fastener interface (T8 key, M2.5x6.5 screw) ensures secure and repeatable clamping of the insert. Practical features for workshop efficiency Assembly and adjustment are streamlined by the Torx screw fixation and standardised shank interface, which reduce setup time and alignment effort. The holder’s dimensions and right-hand orientation are chosen to match common turning applications where access and chip flow demand a compact, coolant-fed solution. For operations prioritising process stability and cost-effective tooling, this indexable-insert holder provides a balanced combination of precision, practicality and straightforward maintenance. For a tailored recommendation on incorporating the Teknik Makina SVJBR 1212 clamp holder into existing turning centres, contact Metav Werkzeuge for detailed specifications or to discuss compatibility with current tooling at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AP541TM Manufacturer: Teknik Makina Designation: Klemmhalter / SVJB for VBMT Indexable Inserts Dimensions and key figures Overall length: 110 mm Cutter head width: 16 mm Holder width: 12 mm Clamp height: 12 mm Cutting height: 32 mm Cutting angle: 93° Weight: 0.141 kg ECLASS: 21181004 Compatibility and features For inserts: VBMT 1103 Cutting direction: Right Internal coolant: Yes ISO designation: SVJBR 1212 Mounting: J11-IK Torx key: T8 Torx screw: M2.5x6.5 FAQ Which inserts fit this clamp holder? The clamp holder is compatible with VBMT 1103 indexable inserts and is optimised for that insert form factor and edge geometry. Is the holder suitable for internal coolant delivery? Yes, the Teknik Makina SVJBR 1212 clamp holder features internal coolant to support cooling and chip evacuation at the cutting edge. What is the cutting orientation of the holder? The toolholder is designed for right-hand cutting operations and provides a 93° cutting angle for stable turning. Which Torx key is required for insert clamping? Clamping is secured using a T8 Torx key with an M2.5x6.5 Torx screw for repeatable fixation. Can this holder be mounted on common boring bars? The holder uses the J11-IK mounting designation, enabling straightforward integration with compatible tool posts and boring-bar systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand tool holder that combines secure clamping and precise indexable-insert compatibility for consistent turning results; order or request technical advice from Metav Werkzeuge to ensure optimal integration into existing CNC workflows. Klemmhalter SVJCR 1010 — SVJC tool holder for VCMT inserts by Teknik Makina The Klemmhalter SVJCR 1010 is a right-hand turning holder designed for use with VCMT 1103 indexable inserts, suitable for medium-duty external turning and finishing applications Right-hand turning holder For VCMT 1103 indexable inserts 10 mm shank width, 12 mm head width Robust 110 mm overall length Stable clamping for reliable chip control The holder is engineered for secure clamping of triangular indexable inserts, providing repeatable seating that reduces micro-vibration and contributes to a consistent surface finish. The specified cutting angle of 93° ensures an optimised tool geometry for common external turning tasks, while the right-hand orientation matches standard machine-tool setups. Compatibility with VCMT 1103 inserts offers quick insert replacement and predictable cutting behaviour across batches, supporting process stability in serial production. Clear mechanical seating and an appropriately sized clamp contribute to reduced rework and improved cycle-time consistency. Compact dimensions that support rigidity and access Space-conscious workshops benefit from the holder's measured form factor: a 10 mm shank width, 12 mm head width and 21 mm cutting height are combined into a compact 110 mm overall length, yielding low overhang and improved stiffness at the cutting edge. The modest mass (about 0.086 kg) minimises inertial loads while preserving clamping force, which helps when working on smaller lathes or tooling stations with limited clearance. These dimensions allow close tool placement in multi-tool turrets and reduce the risk of chatter when paired with appropriately rated inserts and machine settings. Industry-ready design for predictable production Designated SVJCR 1010 to the ISO-style convention, the holder is suited for integration into standard turning tool inventories and is compatible with commonly stocked VCMT 1103 grades. The combination of a compact profile and standard mounting geometry facilitates quick tool changes and straightforward programming adaptations on CNC machines. As a production-grade clamping solution from Teknik Makina, this holder supports repeatability across shifts and operators, helping to maintain throughput while reducing scrap rates and setup times. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools SVJCR 1010 holder into production — technical consultation and parts supply are available by phone +49 2822 7131930 or via e‑mail info@metav-werkzeuge.com Technical data Article number: D239TM Designation: SVJC for VCMT indexable inserts (SVJCR 1010) Brand: Teknik Makina Weight: 0.086 kg Key dimensions Shank width: 10 mm Head (cutting) width: 12 mm Holder height: 10 mm Cutting height: 21 mm Cutting angle: 93° Overall length: 110 mm Special features Compatible with VCMT 1103 indexable inserts ISO-style designation: SVJCR 1010 Right-hand orientation Boring bar designation: J11 FAQ Which inserts fit this holder? The holder accepts VCMT 1103 indexable inserts; SVJCR 1010 is configured for the standard clamping geometry of that insert type. Is the holder right- or left-hand? This tool holder is supplied as a right-hand turning holder suitable for conventional turning directions. What are the key dimensions affecting rigidity? Relevant dimensions are the 10 mm shank width, 12 mm head width and 110 mm overall length, which together influence stiffness and overhang. Can the holder be used for finishing operations? Yes; the combination of a 93° cutting angle and compatibility with finishing grades of VCMT inserts makes this holder suitable for many finishing and light roughing tasks. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO‑specified toolholder that delivers stable clamping and predictable chip control thanks to a 10 mm insert height and a 95° cutting angle; procure the component directly via Metav Werkzeuge or consult the technical team for configuration advice. Clamping holder SCLC for CCMT indexable inserts (SCLCR 1010), right‑hand — Teknik Makina Clamping holder SCLC for CCMT indexable inserts, a right‑hand toolholder for standard turning tasks offering secure clamping and consistent cutting geometry Right‑hand SCLC toolholder for CCMT inserts ISO designation SCLCR 1010 10 mm cutting height for stable clamping Consistent turning performance for repeatable results The compact toolholder is engineered to provide repeatable performance in batch production and maintenance work. Its compatibility with CCMT 0602 indexable inserts and the 95° cutting angle create a cutting geometry that favours predictable chip flow and steady cutting forces, which in turn reduces vibration and improves surface finish. The holder’s constructive stability contributes to longer insert life and fewer re‑set operations, supporting more efficient machine cycles and reduced downtime. Fast, secure set‑up that streamlines workshop routines A clear ISO reference — SCLCR 1010 — and standardised shank designation simplify ordering and fixturing. The toolholder’s 10 mm cutting height and head width of 12 mm make for straightforward alignment with common toolposts, while the overall length of 110 mm balances reach with rigidity. The modest mass (0.105 kg) reduces carriage inertia during rapid traverses and helps preserve toolpath accuracy. These features combine to cut set‑up time and improve reproducibility between jobs. Practical application and technical fit for turning operations Designed for right‑hand turning, this SCLC toolholder accepts CCMT 0602 inserts and is suited to routine contouring and facing operations where secure clamping and defined cutting angle matter. The ISO designation ensures interchangeability with existing toolsets and assists in process planning. For material‑specific guidance or to confirm the best insert grade and geometry for a given machining task, Metav Werkzeuge’s consultants are available to advise on the optimal combination of holder, insert and cutting data. For ordering, technical recommendations or to discuss mounting options for the Teknik Makina SCLC toolholder (SKU D398TM), contact Metav Werkzeuge — available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt, workshop‑centred advice Technical data SKU: D398TM Manufacturer: Teknik Makina Article designation: SCLC for CCMT indexable inserts Core measurements Cutting height: 10 mm Head width: 12 mm Body width: 10 mm Overall length: 110 mm Cutting angle: 95° Weight: 0.105 kg Special features ISO designation: SCLCR 1010 Compatible insert format: CCMT 0602 Cutting direction: right Shank / bar designation: J06 FAQ Which insert size fits this toolholder? The toolholder is specified for CCMT 0602 indexable inserts; the geometry and clamping seat are matched to that insert format. Is the holder right‑hand or left‑hand? This SCLC toolholder is a right‑hand version, designed for conventional right‑hand turning operations. What is the ISO designation for ordering and replacement? Ordering and replacement reference is SCLCR 1010, which helps ensure interchangeability across standard tool posts. How does the 10 mm cutting height affect setup? A 10 mm cutting height places the insert at a standard working centre, reducing setup adjustments and simplifying alignment with common toolposts. Can this holder be used with alternative insert grades? The clamping seat accepts CCMT 0602 inserts, allowing selection of different grades and geometries according to the work material and machining strategy; Metav Werkzeuge can advise on grade selection. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO‑conforming turning holder that combines precise clamping for CCMT 0602 inserts with a defined 95° cutting angle and a convenient 110 mm overall length — the result is consistent external turning and reliable insert indexing. Order directly via Metav Werkzeuge or contact the technical sales team for application advice. SCLC for CCMT Indexable Inserts (SCLCR 1010) – right‑hand turning holder by Teknik Makina A robust SCLC for CCMT Indexable Inserts designed for right‑hand external turning, compatible with CCMT 0602 indexable inserts and engineered to fit standard ISO SCLCR 1010 toolpost systems. Compatible with CCMT 0602 inserts ISO SCLCR 1010 designation Right‑hand orientation 95° cutting angle Precision clamping for repeatable turning results The SCLCR 1010 style holder offers precise clamping and a compact profile that supports repeatable indexable insert seating. With a head height of 10 mm and a defined seating for CCMT 0602 inserts, the design reduces play at the cutting edge and keeps tool run‑out low. That stability translates into more consistent surface finish and prolonged insert life, because the insert is held firmly at the designed bite point rather than relying on ad‑hoc fixtures. The ISO designation guarantees compatibility with existing toolposts and simplifies tool inventory management. Stable geometry for controlled cuts and easy set‑up Engineered with a 95° cutting angle and a right‑hand orientation, the holder directs cutting forces predictably for external turning operations. The unit’s 110 mm overall length and modest mass (0.106 kg) make it simple to position in a toolpost while maintaining rigidity; shorter overhang reduces deflection and vibration. The SCLC form factor permits quick indexable insert replacement and re‑seating, which minimises machine downtime. For shops seeking consistent cycle times and lower scrap rates, the controlled geometry is a tangible operational advantage. Practical supply and application support for workshop integration Supplied with a standard SCLCR interface and identified as SKU D422TM, the holder integrates into common lathe setups and forms part of a pragmatic tooling strategy. Metav’s distribution from Emmerich acts as a quality checkpoint for the European market, ensuring dependable availability and clear traceability. For applications that demand predictable machining outcomes, this holder delivers a compact, industry‑aligned solution while allowing selection of insert grades and coatings to match specific material challenges. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools SCLC turning holder (SKU D422TM) and to discuss the optimal insert grade and set‑up for the intended machining task. Technical data Article number: D422TM Type designation: SCLCR 1010 For inserts: CCMT 0602 Orientation: right‑hand Cutting angle: 95° Overall length: 110 mm Head height: 10 mm Head width: 10 mm Holder width: 10 mm Weight: 0.106 kg Boring bar designation: J06‑F Brand: Teknik Makina Measurements Overall length: 110 mm Head height: 10 mm Head width: 10 mm Holder width: 10 mm Weight: 0.106 kg Cutting angle: 95° Special features SCLC design for CCMT indexable inserts Compatible with CCMT 0602 ISO: SCLCR 1010 Right‑hand orientation 95° cutting angle Boring bar designation: J06‑F FAQ Which inserts fit this holder? Compatible with CCMT 0602 indexable inserts; the holder is configured for standard CCMT pocket seating. Is the holder right‑hand or left‑hand? This SCLC holder is a right‑hand version, intended for conventional right‑hand external turning. What does the 95° cutting angle mean in practice? A 95° cutting angle provides a near‑orthogonal approach to the workpiece that balances cutting edge strength with accessibility for profiling and facing operations. How is the holder referenced and ordered? The item is listed as SKU D422TM, type SCLCR 1010, from Teknik Makina; use that reference when specifying the component for procurement. Can the holder be used with different insert grades for various materials? Yes, the mechanical seat fits CCMT 0602 inserts; select the appropriate insert grade and coating separately to match the workpiece material and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, right-hand clamping solution with a 95° cutting angle and secure compatibility with CCMT 0602 indexable inserts for reliable external turning; order the holder via Metav Werkzeuge or consult their specialist team for application advice. SCLC Clamping Holder (SCLCR 1212) – Right-hand, for CCMT 0602 inserts (Teknik Makina) The SCLC for CCMT Indexable Inserts is a right-hand external turning holder designed for repeatable clamping of CCMT 0602 inserts in medium-duty turning applications across production and job-shop environments. Right-hand external turning holder Holds CCMT 0602 indexable inserts SCLCR 1212 ISO shank profile 95° cutting angle; 110 mm overall length Consistent cutting geometry for repeatable results The holder maintains a precise 95° cutting angle, which stabilises the cutting geometry and ensures consistent chip flow in common turning operations. Thanks to the defined angle and the SCLCR 1212 shank profile, the tool reduces the need for repeated setup adjustments, delivering measurable time savings in series production. The robust clamping interface is compatible with CCMT 0602 inserts and supports predictable tool life when used with suitable grades, enabling shops to plan tool-change intervals with greater confidence and less downtime. Reliable insert retention that enhances surface finish A secure insert seat and retention system minimise micro-movement during cuts, improving surface finish and feature accuracy. The clamping concept, tailored for CCMT-style inserts, provides solid clamping and straightforward insert indexing, which helps to maintain tolerances across batches. For operations prioritising dimensional stability, this holder offers a practical balance between rigidity and accessibility, so set-up times are reduced while delivering better part-to-part consistency. Compact shank dimensions for versatile machine mounting With a shank height and width of 12 mm and an overall length of 110 mm, the holder fits tight toolpost layouts where space is limited. The compact dimensions make it suitable for multi-station turrets and smaller lathes without compromising the working envelope. At a weight of 0.147 kg, the assembly contributes minimally to toolhead inertia, which can improve dynamic response when performing light to medium cuts and when switch-over between tools is frequent. Practical choice for everyday turning workflows Engineered for common turning tasks, the holder pairs well with a range of carbide grades chosen for steel and general-purpose materials. Its right-hand orientation and ISO designation provide quick identification for toolroom inventories, simplifying tool management and reorder processes. The combination of a recognised shank format and standard insert compatibility allows for easy integration into existing tooling systems, supporting efficient workshop logistics and predictable production throughput. For dependable turning performance choose the Teknik Makina SCLC clamping holder — contact Metav Werkzeuge in Emmerich for tailored application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: D424TM Manufacturer: Teknik Makina ISO designation: SCLCR 1212 Compatible inserts: CCMT 0602 Tooling bar designation: J06-F Facts Cutting angle: 95° Overall length: 110 mm Shank height: 12 mm Shank width: 12 mm Cutting-head width: 12 mm Weight: 0.147 kg Special features Right-hand external turning holder SCLC design for CCMT indexable inserts Secure insert clamping for repeatable cuts FAQ Which inserts fit this holder? The SCLC clamping holder accepts CCMT 0602 indexable inserts; insert seating is designed for standard CCMT geometry. Is the holder suitable for left-hand turning? This model is a right-hand holder; for left-hand operations a left-hand counterpart is required. What is the ISO designation for identification? The tool is specified as SCLCR 1212, matching common ISO shank profiles for external turning holders. Can this holder be used on small lathes? With a compact shank (12 mm × 12 mm) and 110 mm overall length, the holder is appropriate for constrained toolpost spaces and smaller turret arrangements. How does the cutting angle affect machining? The 95° cutting angle supports controlled chip flow and stable cutting geometry, which aids surface finish and repeatability in standard turning tasks. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust clamping, a compact 12 x 12 mm shank and compatibility with 16 ER indexable inserts for reliable external turning. Order the clamp holder directly via Metav Werkzeuge or consult our specialists for application advice. Clamp holder AL 1212 16 ER — toolholder for indexable inserts, 16 mm cutting head (Teknik Cutting Tools) Clamp holder AL 1212 16 ER is a right-hand toolholder engineered for secure clamping of 16 ER indexable inserts in external thread and turning applications Secure 12 x 12 mm shank profile 16 mm cutting head width for stable cuts Right-hand configuration for external turning Consistent clamping for repeatable thread turning The clamp holder AL 1212 provides a rigid clamping platform that reduces vibration and run-out during external threading. The 12 x 12 mm shank profile and precise ISO designation AL 1212 ensure repeatable positioning in the toolpost, improving thread quality and minimising rework. Compatibility with standard 16 ER indexable inserts allows straightforward tool replacement and steady cutting forces for demanding production runs. Stable cutting geometry that improves tool life A 16 mm cutting head width combined with a cutting height of 20 mm delivers a stable cutting geometry that helps control chip formation and heat generation. The right-hand cutting orientation is optimised for outside-thread and general turning operations, enabling consistent material removal rates and predictable surface finish. The result is reduced insert wear and longer intervals between tool changes. Compact design for workshop efficiency With an overall length of 110 mm and a nominal weight of 0.144 kg, the toolholder balances rigidity with manageable handling on the shop floor. The shank designation J16-ER16 accommodates common turret or boring-bar fixtures, reducing the need for special adaptors. The compact footprint supports close-proximity tool arrangements on multi-station turrets, improving setup density and throughput. Built for demanding external turning tasks Manufactured by Teknik Cutting Tools, this clamp holder is tailored to external turning and threading where secure insert support is critical. The robust clamp mechanism and standardised interface simplify insert indexing and replacement while maintaining cutting stability. The design supports consistent production performance across batches and enables reliable integration into workshop tool inventories. Secure reliable supply of Teknik Cutting Tools clamp holders via Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility, availability and delivery from Emmerich Technical data SKU: D261TM GTIN: 4061905152504 Manufacturer: Teknik Makina ISO designation: AL 1212 Core specifications Shank width: 12 mm Shank height: 12 mm Cutting head width: 16 mm Cutting height: 20 mm Overall length: 110 mm Weight: 0.144 kg Compatibility & features For indexable inserts 16 ER Shank designation J16-ER16 Right-hand cutting direction Suitable for outside threads and external turning operations FAQ Is this toolholder suitable for external threading? The clamp holder AL 1212 16 ER is designed for external thread turning and provides the clamping stability required for consistent thread form. Which insert format fits the holder? This toolholder accepts 16 ER indexable inserts; the standard format simplifies sourcing and insert changes. What are the shank dimensions and bar compatibility? Shank dimensions are 12 x 12 mm and the tool corresponds to the J16-ER16 shank designation for common turret and bar mounts. Can the holder be used for left-hand turning? The toolholder is configured for right-hand cutting; left-hand operations require a suitable left-hand equivalent. How does the compact length affect setup? The 110 mm overall length offers a compact footprint that supports tight tool layouts on multi-station turrets while maintaining adequate rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, work-ready toolholder that combines precise insert compatibility and internal coolant for stable turning results; its robust clamping with standard fasteners keeps downtime to a minimum. Order the holder directly via Metav Werkzeuge or consult our specialists for application-specific advice. Klemmhalter — SDJC tool holder for DCMT indexable inserts with internal coolant, right-hand The Klemmhalter is a right-hand SDJC tool holder engineered for DCMT 11T3 indexable inserts, optimised for external turning operations where coolant supply and repeatable clamping are essential. Internal coolant supply For DCMT 11T3 indexable inserts Right-hand turning orientation Compact 110 mm overall length Precise compatibility that reduces set-up time The holder is specified as SDJCR 1212, created to accept DCMT 11T3 indexable inserts and to work with standard tool shanks such as J11-IC. Its defined geometry and the near-right cutting angle 93° ensure predictable tool projection and chip flow during external turning. Designed for direct replacement of like-form holders, this component minimises the need for re-profiling toolpaths, supporting efficient machine changeover and stable process control. Robust mechanical design for reliable clamping Key fastening elements are supplied in common workshop standards: a clamp plate screw M5, a securing Torx screw M3.5x11 and the matching Torx T15 key interface are used for the insert seat and assembly. The holder presents a compact footprint — 110 mm overall length with a total height 12 mm, a toolholder width of 12 mm and a cutting-head width of 16 mm — keeping overhang low and reducing vibration. The assembly weight of 0.11 kg contributes to improved dynamic behaviour on high-speed lathes. Integrated coolant and maintenance advantages Internal coolant is built into the toolholder to deliver cutting fluid directly to the insert edge, improving chip evacuation, extending insert life and stabilising cutting temperatures. The use of internal feed reduces reliance on external nozzles and simplifies set-up. Routine service focuses on fastener checks and ensuring the TA030 clamp plate is seated correctly; familiar fasteners and commonly available keys make maintenance quick and predictable, reducing unplanned downtime. Application scenarios and mounting guidance This right-hand tool holder is intended for external turning where DCMT 11T3 inserts provide the required cutting geometry and edge preparation. Typical applications include finishing and light to medium machining of steels where predictable chip control and coolant delivery matter. The nominal cutting height 32 mm must be considered when calibrating tool offsets and selecting insert grades. Mounting into compatible tool posts or boring bars follows standard procedures for the J11-IC shank family; the compact design supports tight toolpacks and multi-station turrets. For tailored technical guidance or to secure supply of the Teknik Makina SDJCR 1212 clamping toolholder, contact Metav Werkzeuge for expert advice and prompt delivery from Emmerich. Technical data Article number: AP509TM Manufacturer: Teknik Makina ISO designation: SDJCR 1212 Weight: 0.11 kg Compatible insert: DCMT 11T3 Core data Overall length: 110 mm Total height: 12 mm Holder width: 12 mm Cutting-head width: 16 mm Cutting height: 32 mm Cutting angle: 93° Direction: Right-hand Special features Internal coolant Clamp plate type: TA030 Clamp plate screw: M5 Securing screw: Torx M3.5x11 Torx key size: T15 Compatible shank designation: J11-IC FAQ Is this holder compatible with DCMT 11T3 inserts? Yes, the holder is designed specifically for DCMT 11T3 indexable inserts and seats them in the SDJC pocket geometry for secure cutting. Does the tool holder supply internal coolant to the insert? Internal coolant is integrated into the tool holder to deliver fluid directly to the cutting edge, improving chip control and insert life. Which fasteners are used to secure the insert and clamp plate? The design uses a M5 clamp plate screw and a Torx M3.5x11 securing screw; assembly and service use a Torx T15 key. What is the cutting orientation and how does it affect mounting? This is a right-hand turning holder; it must be mounted accordingly in the turret or tool post to achieve the specified cutting direction. Can this holder be mounted on standard J11-IC shanks? Yes, the holder is compatible with tool shanks designated J11-IC, facilitating integration into existing tool set-ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right‑hand clamp holder that combines precise clamping with broad compatibility for CCMT 09T3 inserts; the low mass and 110 mm overall length support stable turning and straightforward setup. Order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. Clamp holder SCACR‑F for CCMT Indexable Inserts — right‑hand, 12 × 12 mm cutting head (Teknik Makina) A robust clamp holder (SCACR‑F) designed for right‑hand turning with CCMT 09T3 indexable inserts, suitable for workshop and production lathe operations. SCACR 1212 ISO designation, compact design Compatible with CCMT 09T3 indexable inserts Right‑hand orientation for standard turning 12 × 12 mm cutting head, 110 mm overall length Consistent turning accuracy through compact rigidity The holder is engineered to deliver stable clamping and repeatable insert positioning, minimising chatter in medium‑ to heavy‑duty turning work. Its 12 × 12 mm cutting head and the SCACR 1212 ISO form provide a compact interface that reduces overhang and improves rigidity; this leads to more consistent surface finishes and predictable tool life. The combination of a rigid head geometry and a 90° approach helps maintain cutting forces within the expected range for standard right‑hand operations. Broad compatibility that streamlines tooling management Compatibility with CCMT 09T3 indexable inserts and the matching shank designation (J09‑F) simplifies inventory and reduces set‑up time when swapping inserts or tools. The holder’s right‑hand orientation and standardised cut‑geometry allow it to integrate with existing tool posts without special adapters, while the modest mass (0.143 kg) keeps centrifugal loads low for higher spindle speeds. These attributes support efficient changeovers and predictable machining cycles in batch production or jobbing environments. Practical length and application scope for workshop use With an overall length of 110 mm and a 90° cutting angle, the tool is suited to general turning, facing and light profiling tasks where access and clearance are considerations. The compact dimensions make it a sensible choice for operations that prioritise tool stability and repeatable positioning over extended reach. The holder’s straightforward design supports fast clamp and insert replacement, aiding throughput in workshops and small production lines where reliability and supply continuity are essential. Choose the Teknik Cutting Tools clamp holder SCACR‑F from Metav Werkzeuge for reliable right‑hand turning with CCMT 09T3 inserts — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D412TM Manufacturer: Teknik Makina Product designation (EN): SCACR‑F for CCMT Indexable Inserts ISO designation: SCACR 1212 Core dimensions Holder height: 12 mm Cutting‑head width: 12 mm Overall width: 12 mm Overall length: 110 mm Weight: 0.143 kg Cutting angle: 90° Features & compatibility For indexable inserts: CCMT 09T3 Cutting direction: right Shank / boring bar designation: J09‑F SKU: D412TM FAQ What insert type does this holder accept? The clamp holder accepts CCMT 09T3 indexable inserts; the SCACR‑F design is matched to that insert size for correct seating and secure clamping. Is the holder suitable for left‑hand turning? This particular model is configured for right‑hand turning; for left‑hand applications a left‑hand counterpart is required. What are the key dimensions to check for toolpost compatibility? Relevant dimensions are the 12 × 12 mm cutting head and an overall length of 110 mm; these determine fit and clearance in the toolpost and turret. Which standard identifies the holder form? The toolholder follows the SCACR 1212 ISO designation, indicating the head form and size suitable for CCMT inserts. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-engineered turning solution that combines stable clamping with compatibility for VBMT 1103 indexable inserts and a space-saving 10 x 10 mm head for consistent chip control and reproducible results. Order the holder directly via Metav Werkzeuge or consult the technical team for application advice. SVJBL 1010 clamping holder – SVJB for VBMT indexable inserts, left-hand, compact 10 × 10 mm head (Teknik Makina) The SVJBL 1010 clamping holder is a left-hand turning toolholder engineered for secure clamping of VBMT 1103 indexable inserts in external turning applications across general workshop and light industrial environments. ISO SVJBL 1010, robust clamping design Compatible with VBMT 1103 indexable inserts Left-hand cutting, 93° cutting angle 110 mm overall length, 0.098 kg weight Increased turning stability with a compact clamping head The compact 10 × 10 mm clamping head gives a concentrated support surface that improves rigidity during cuts, reducing chatter and increasing surface finish consistency. Combined with the precise clamping geometry, the holder allows reliable seat retention of the VBMT 1103 inserts, which simplifies insert changes and shortens setup times. The focused design is particularly suitable where limited overhang is required and where reproducible results matter on short to medium turning operations. Precise cutting geometry for predictable chip flow With a cutting angle of 93° and a cutting-edge height of 22 mm, the toolholder supports a neutral to slightly negative lead suitable for a wide range of turning tasks. The characteristic geometry promotes controlled chip formation and evacuation, which helps maintain tool life and part quality. These measurable parameters give production planners clear orientation when integrating the holder into existing tool assemblies and machining cycles. Space-efficient length and light weight for flexible fixturing An 110 mm overall length and a low mass of 0.098 kg make the toolholder easy to mount in compact toolposts and turret stations without adding excessive inertia. The reduced footprint supports closer tool spacing and multi-station setups while limiting the effect on machine dynamics. The combination of small dimensions and defined ISO designation ensures that planning and inventory management remain straightforward for workshop logistics. Designed for left-hand turning and straightforward integration The left-hand cutting orientation and the compatible shank designation J11-F enable direct substitution into left-handed turning applications where VBMT geometry is preferred. The holder’s ISO marking guarantees compatibility with standard indexable insert sizes and established clamping procedures, supporting a fast integration into production lines and easing spare-part stocking for maintenance teams. For technical consultation on the SVJBL 1010 clamping holder or to arrange reliable supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: D395TM Product: SVJB for VBMT Indexable Inserts Manufacturer: Teknik Makina ISO designation: SVJBL 1010 Turning bar designation: J11-F Numbers / Core Technical Data Overall length: 110 mm Head width: 10 mm Shank width: 10 mm Head height: 10 mm Cutting edge height: 22 mm Cutting angle: 93° Weight: 0.098 kg Compatible insert: VBMT 1103 Cutting direction: left Special features / Versions Left-hand design Designed for VBMT 1103 indexable inserts Compact 10 × 10 mm clamping head ISO-compliant designation SVJBL 1010 FAQ Which inserts fit this toolholder? The SVJBL 1010 clamping holder accepts VBMT 1103 indexable inserts; this match ensures correct seating and chip control for standard VBMT geometries. Is the holder suitable for left-hand turning only? Yes, the toolholder is configured for left-hand cutting, indicated by its cutting-direction specification and ISO marking. What is the overall length and how does it affect setup? The overall length is 110 mm, which supports compact setup and closer tool spacing in turrets and toolposts. How heavy is the holder and why is that relevant? The component weighs 0.098 kg, a figure that reduces added inertia on the toolmount and benefits dynamic stability for shorter overhangs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust solution that combines precise clamping, compact dimensions and easy installation for consistent turning results; the right-hand configuration and 90° approach angle ensure predictable chip flow and repeatable geometry. Order this clamping solution via Metav Werkzeuge or consult their specialists for technical advice. Clamping holder DCMT 0702 L110 mm — for DCMT 0702 indexable inserts, right-hand, Teknik Makina A clamping holder DCMT 0702 L110 mm designed for secure mounting of DCMT 0702 indexable inserts in turning operations, offering a compact 12 x 12 mm shank for stable tool posts. Secure clamping for DCMT 0702 inserts 12 x 12 mm shank for stable mounting Right-hand cutting, 90° approach angle 110 mm overall length, lightweight 148 g Consistent cutting performance for production turning This toolholder delivers secure clamping for DCMT 0702 inserts, translating insert geometry into repeatable part quality. The 90° approach angle and right-hand configuration simplify tool path planning and chip evacuation, while the cutting height 15 mm aligns the insert cutting edge with common toolpost centres. For workshop managers focused on throughput, the result is a reduction in rework and shorter set-up times thanks to predictable insert seating and a stable cutting position. Fast, reliable mounting and small footprint The compact 12 x 12 mm shank and short overall length of 110 mm enable mounting in tight tool posts and turret pockets without compromising rigidity. The clamping system uses a Torx fastener ( Torx T8 ) with a M2.5x5.5 screw, permitting quick insert changes and consistent clamp torque. The 16 mm cutting head width and defined cutting height support accurate edge engagement; in practice this reduces vibration and extends insert life, which benefits cost-efficiency across repetitive turning tasks. Suitable applications and simple technical support Engineered for general turning and finishing operations where indexable inserts are preferred, the holder is well suited to small-batch production and workshop repairs that demand repeatability. The low mass (approx. lightweight 148 g) helps balance assemblies on small turrets and minimises inertial effects at medium spindle speeds. If additional technical data or mounting advice is required, Metav Werkzeuge provides direct support by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. For reliable right-hand turning with DCMT 0702 inserts, contact Metav Werkzeuge to discuss supply, mounting options and compatibility with existing tool posts. Technical data Article number: D436-1TM Label: Klemmhalter DCMT 0702 L110mm eClass: 21181004 Manufacturer: Teknik Makina Core technical figures Overall length: 110 mm Shank: 12 x 12 mm Cutting head width: 16 mm Cutting height: 15 mm Weight: 0.148 kg Cutting direction: Right Approach angle: 90° Special features For DCMT 0702 indexable inserts Holder designation ISO: 1212 Torx key: T8 Torx screw: M2.5x5.5 SKU: D436-1TM FAQ Which insert size is compatible with this holder? The clamping holder accepts DCMT 0702 indexable inserts, designed to seat the insert securely for reliable turning. Is the holder right- or left-hand? This toolholder is configured for right-hand cutting with a 90° approach angle. What are the shank dimensions and why do they matter? The shank measures 12 x 12 mm, providing a compact, rigid mount that fits many small tool posts and reduces flex under load. Which torque fastener is used for clamping? Clamping is effected by a Torx fastener ( Torx T8 ) with a M2.5x5.5 screw for consistent clamp pressure and quick insert changes. What cutting height should be expected? The holder presents a cutting height of 15 mm, chosen to align with common toolpost centre heights for many lathes. Can this holder be used in high-feed roughing operations? The compact design and secure clamping suit a wide range of turning tasks; however, for heavy roughing at high feedrates, tool geometry and insert grade should be matched to the application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO-based toolholder that combines standardised fitting with low mass and secure clamping for efficient external threading operations; order the component via Metav Werkzeuge or consult the team for compatibility checks and fast delivery. Clamping holder SER 1212 — right-hand external thread, for 16 ER inserts (Teknik Makina) A clamping holder designed for right-hand external threading, compatible with 16 ER round inserts and the J16‑ER16 boring-bar system for compact lathe setups. Right-hand threading orientation Compatible with 16 ER inserts Total length 110 mm for tight spaces Low weight 0.11 kg reduces vibration Precise thread turning with a standardised holder The SER 1212 designation ensures a standardised fit that simplifies tool management and reduces setup time across batches. Built for external thread turning in a right-hand direction, this clamping system accepts 16 ER inserts and mates with the J16‑ER16 bar format, so interchangeability is maximised. The use of an established ISO-style holder means spare parts and replacement inserts can be stocked with confidence, improving production continuity and lowering administrative overhead. Secure fastening for uninterrupted production A robust clamping arrangement is provided via the specified fastener geometry: the clamping screw uses a Torx T15 drive and the retaining screw is M3.5x11, delivering repeatable torque and firm insert retention. The defined accessory references, including BSP010 shim and TA061 support plate, permit precise seat alignment and safe cutting forces. As a result, tool slippage is minimised and insert life is preserved, which translates directly into fewer stoppages and better process reliability. Compact dimensions for confined machining With a total length of 110 mm, a head width of 16 mm and a cutting height of 22 mm, the holder is tailored to operations where access is limited. The body measures 12 mm in width and 12 mm in height, keeping the overall profile slim and allowing closer approach to the workpiece. At just 0.11 kg, the reduced mass helps lower centrifugal and inertial effects during high‑speed turning, contributing to smoother finishes and improved surface integrity on delicate thread forms. Production-ready engineering for workshop use Designed for external thread applications, the holder is optimised for repeatable mounting and easy insert exchange, which supports throughput-focused workshops. The compact tooling concept and clear specification reduce the risk of mounting errors; the component's ISO-based labelling and compatibility approach allow purchasing and inventory processes to be streamlined. For manufacturers aiming to keep machine downtime low while maintaining consistent thread quality, this holder provides a pragmatic balance of simplicity and precision. For technical confirmation and rapid supply of the Teknik Makina SER 1212 clamping holder (SKU D500TM), contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and prompt dispatch from Emmerich Technical data SKU: D500TM Manufacturer: Teknik Makina ISO designation: SER 1212 For inserts: 16 ER Boring-bar compatibility: J16-ER16 Numbers / Core technical data Total length: 110 mm Cutting height: 22 mm Head width: 16 mm Body width: 12 mm Body height: 12 mm Weight: 0.11 kg Torx key: T15 Clamping screw: M3.5x11 Designs / Special features Right-hand cutting orientation For outside threads (external threading) Compatible shim: BSP010 Support plate reference: TA061 Low-mass construction for reduced vibration FAQ What insert size is required for this holder? The holder accepts 16 ER round thread inserts; the tool is specified for standard 16 ER threading inserts compatible with the J16‑ER16 system. Is the clamping direction left or right handed? This clamping holder is configured for right‑hand external threading, as indicated by the right-hand cutting orientation. Which ISO designation identifies the holder? The tool is designated SER 1212, which denotes the ISO-style mounting and assists with standardised inventory and replacement parts. What are the key dimensions affecting reach and access? Critical measurements are 110 mm total length, 22 mm cutting height and a 16 mm head width, giving a slim profile for confined turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the SDACR-F clamping holder’s compact 12 mm head, 90° cutting angle and reliable compatibility with DCMT 0702 inserts — delivering consistent right-hand turning performance and stable toolholding. Order the clamping holder directly via Metav Werkzeuge or ask our consultants for technical advice. Clamping holder SDACR-F for DCMT indexable inserts — compact right-hand toolholder with 90° geometry A compact SDACR-F clamping holder designed for turning with DCMT 0702 indexable inserts; suitable where secure clamping and predictable cutting geometry are required. Compact 12 mm head width Compatible with DCMT 0702 inserts Right-hand orientation, 90° cutting angle ISO SDACR 1212 shank designation Predictable turning with compact, rigid toolholding The SDACR-F style toolholder is engineered for precision in short overhang turning operations. Its 12 mm head and balanced geometry help reduce vibration and improve surface finish when paired with DCMT 0702 inserts. The combination of a short, rigid SDACR 1212 shank and a defined 90° cutting angle produces consistent chip formation and predictable tool forces. For manufacturing environments where cycle-time reliability and reproducible part quality matter, this holder offers a straightforward, low-complexity solution that supports higher process stability and longer insert life. Designed for tight toolpaths and straightforward integration Compact dimensions and a standard shank designation allow integration into existing tool systems with minimal rework. The right-hand orientation and J07-F shank mating ensure repeatable seat location and simple indexing of inserts, supporting efficient tool changes and reduced downtime. The holder’s modest mass (approx. 0.135 kg) contributes to reduced centrifugal load at higher spindle speeds and better dynamic behaviour in light to medium-duty turning tasks. Compatibility with common DCMT indexable inserts makes the holder a practical choice for workshops seeking modularity and easy parts sourcing. Simple setup, secure clamping and durable performance A focus on secure clamping and precise insert seating reduces positional drift and maintains cutting geometry through extended runs. The holder’s construction suits routine production and job-shop applications where operator-friendly handling and consistent performance are essential. Clear ISO designation and shank coding simplify tool management and reordering. When paired with appropriate inserts and cutting parameters, the holder supports efficient material removal with predictable tool life and stable process outcomes, reflecting an emphasis on measurable productivity gains rather than unverified claims. Choose the SDACR-F clamping holder (D436TM) for dependable right-hand turning — contact Metav Werkzeuge in Emmerich for tailored technical advice, availability and fast dispatch Technical data Article number: D436TM Manufacturer: Teknik Makina Item: SDACR-F for DCMT Indexable Inserts ISO designation: SDACR 1212 Weight: 0.135 kg Measurements Head height: 12 mm Head width (cutting head): 12 mm Body width: 12 mm Total length: 110 mm Cutting angle: 90° Compatibility & features Compatible with DCMT 0702 inserts Right-hand cutting direction Shank designation: J07-F For DCMT indexable inserts FAQ Which inserts fit this clamping holder? The SDACR-F clamping holder is designed for DCMT 0702 indexable inserts and secures standard DCMT-format inserts reliably in production setups. Is the SDACR-F suitable for left-hand turning? This holder is supplied in a right-hand orientation and is intended for right-hand turning operations; left-hand variants must be selected separately. What is the ISO designation and why does it matter? ISO designation SDACR 1212 identifies the shank and head form for tool management and ensures compatibility with standard tool posts and holders. How does the 90° cutting angle affect machining? A 90° cutting geometry provides predictable cutting forces and a neutral approach to the workpiece, benefiting finish quality and tool life in many turning applications. Which shank coupling is required? The clamping holder uses a J07-F shank form for mounting; confirm machine-tool or turret interface compatibility before installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise left‑hand turning, stable clamping and straightforward compatibility with DCMT 0702 inserts — a compact solution that keeps set‑ups consistent and production predictable. Order the SDJCL 1010 clamping holder directly via Metav Werkzeuge or ask our consultants if needed. SDJCL 1010 clamping holder – left‑hand SDJC for DCMT 0702 indexable inserts (Teknik Makina) The SDJCL 1010 is a left‑hand toolholder crafted for reliable turning operations with DCMT 0702 indexable inserts, designed to integrate into standard toolposts for small to medium turning tasks Left‑hand orientation for precision turning Fits DCMT 0702 indexable inserts Cutting height 15 mm for consistent geometry 110 mm overall length for stable reach Precise left‑hand performance for consistent turning results The holder is built around a left‑hand mounting angle and a 93° cutting angle, which combines to secure repeatable insert seating and predictable chip flow. As a dedicated insert carrier, it reduces setup variation compared with custom ground tooling; the result is consistent cutting geometry across batches. For workshops adopting indexable tooling, this holder offers a rational route to repeatability and uptime improvements without complex adjustments. Compact dimensions that increase stiffness and control With an overall length of 110 mm, a cutting height of 15 mm and a compact head width of 12 mm, the design prioritises rigidity and minimal overhang. The holder’s modest mass (approx. 0.097 kg) and measured cross‑section reduce deflection during interrupted cuts, improving surface finish and dimensional stability. These measurable characteristics translate into fewer rejects and less rework when machining common turning tasks with indexable inserts. Straightforward integration and ISO‑aligned designation The toolholder carries the ISO designation SDJCL 1010 and a shank code of J07, making it suitable for quick identification and integration into existing tool inventories. Compatibility with DCMT 0702 inserts ensures simple insert changes and predictable cutting edges; indexable inserts allow fast seat replacement without regrinding. The holder’s standardised interface supports efficient tooling management and helps maintain process reliability across shifts. For professional left‑hand turning with proven repeatability, order the SDJCL 1010 from Teknik Makina via Metav Werkzeuge or speak to our consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: D360TM Manufacturer: Teknik Makina ISO designation: SDJCL 1010 Compatible inserts: DCMT 0702 Cut direction: Left‑hand Facts Overall length: 110 mm Cutting height: 15 mm Holder height: 10 mm Head width: 12 mm Holder width: 10 mm Cutting angle: 93° Weight: 0.097 kg Special features Shank designation: J07 For indexable turning inserts Brand: Teknik Makina FAQ Which inserts fit this holder? The SDJCL 1010 clamping holder is specified for DCMT 0702 indexable inserts, enabling standard insert replacement and consistent cutting edge positioning. Is the holder suitable for right‑hand turning? This toolholder is a left‑hand design; for right‑hand turning, a corresponding right‑hand variant should be selected rather than using the SDJCL 1010. What does the ISO designation SDJCL 1010 indicate? The ISO designation identifies the holder geometry and size; SDJCL 1010 describes the SDJC style with the specific shank/profile and dimensions used by Teknik Makina for locating and clamping DCMT 0702 inserts. Can the holder be used in standard toolposts? The SDJCL 1010 includes a J07 shank designation and is intended for integration into toolposts and turret systems that accept that shank style and size. What benefit does the 93° cutting angle provide? A 93° cutting angle changes the approach geometry to the workpiece, helping with insert clearance and predictable chip direction, which aids repeatable surface finish when using the SDJCL 1010 holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise, rigid parting solution with clear insert compatibility and compact dimensions for consistent cycle times. The slim 3.45 mm blade width and 21.4 mm cutting height ensure stable separations while the 110 mm overall length simplifies integration into standard toolholders — order directly via Metav Werkzeuge or consult our specialists for verification. Parting Blades KL54TM — parting blade for indexable inserts, 3.45 mm width, 110 mm length (Teknik Makina) The Parting Blades KL54TM are a compact parting solution intended for fine parting and grooving tasks where compatibility with Sandvik indexable inserts (N151-4) and consistent cut control are required. Compatible with Sandvik N151-4 inserts Blade width 3.45 mm for narrow cuts Cutting height 21.4 mm for insert fit Length 110 mm for robust mounting Precise geometry for consistent parting results The KL54TM series is engineered to deliver precision and repeatability in parting and grooving operations. The narrow 3.45 mm blade profile minimises material waste while maintaining adequate rigidity to reduce chatter. With an overall length of 110 mm and a cutting height of 21.4 mm, the design matches the seat dimensions of standard indexable inserts such as Sandvik N151-4, enabling secure clamping and consistent cutting height. This controlled geometry translates directly into shorter cycle times and fewer rejects in serial turning environments. Designed to improve process efficiency and tool life A focus on stable clamping and correct insert seating reduces stress on the cutting edge and the holder, which helps to extend tool life and lowers overall tooling costs. The blade’s dimensions allow accurate alignment in common grooving and parting holders, supporting predictable chip flow and less thermal loading at the cutting zone. For production-focused workshops and smaller job shops alike, the result is a measurable improvement in process reliability and a reduction in unexpected downtime. Practical application notes for workshop integration These parting blades suit a variety of turning setups where indexable inserts are preferred for fast insert changes and repeatable results. The KL54TM is specified for use with Sandvik N151-4 inserts, ensuring a proper geometric match for height and seat form; this compatibility simplifies inventory and reduces setup complexity. Suitable mounting in a rigid parting holder and correct insert torque are recommended to exploit the blade’s stiffness and to avoid premature wear. The combination of narrow blade and correct insert pairing is especially effective when minimal material removal and precision separation are priorities. What the dimensions mean for selection and planning When planning tooling for a turning cycle, the blade width (3.45 mm) indicates the kerf size and minimum remaining material, while the cutting height (21.4 mm) confirms seat compatibility with the referred insert series. The overall 110 mm length provides enough engagement for many standard holders without excess overhang, which helps to maintain stability. These technical parameters enable straightforward comparison with existing holders and inserts, supporting informed purchasing decisions and faster setup on the machine. For assured parting accuracy and confirmed compatibility, discuss the KL54TM parting blade with Metav Werkzeuge — our specialists at Metav Werkzeuge can verify fitment with Sandvik N151-4 inserts and advise on the best holder arrangement; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KL54TM Manufacturer: Teknik Makina Designation: Parting blades (Stechschwerter) eClass: 21181018 Numbers / Core technical data Length: 110 mm Blade width: 3.45 mm Blade height: 26 mm Cutting height: 21.4 mm Compatibility and special features Compatible insert: N151-4 Compatible insert manufacturer: Sandvik Application: Parting / grooving with indexable inserts FAQ What inserts are recommended for these blades? The parting blades KL54TM are specified for use with Sandvik N151-4 indexable inserts to ensure correct seating and cutting height. What are the key dimensions to check for holder compatibility? Check the 110 mm overall length, 3.45 mm blade width and 21.4 mm cutting height when matching holders and inserts for secure mounting of the KL54TM. Is the KL54TM suitable for narrow kerf parting operations? Yes, the slim 3.45 mm blade width is intended for narrow kerf operations where minimal material removal and high precision are required. Can these blades be used with other insert brands? Compatibility is defined for Sandvik N151-4 inserts; alternative brands may be usable if they match the same insert geometry and seat dimensions as specified for KL54TM. How does the cutting height affect setup? The 21.4 mm cutting height determines the required insert seat position in the holder and must match the holder’s insert pocket to ensure stable cutting and correct tool centreline alignment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise combination of compatibility with GTN 4 indexable inserts, a compact 110 mm length and a slim 3.45 mm blade for clean parting operations. Order the parting blade directly via Metav Werkzeuge or request advice from our consultants for straightforward integration into existing turning setups. Parting Blades KL24TM – Grooving blade for GTN 4 inserts, 110 mm length (Teknik Makina) The Parting Blades KL24TM is a precision parting and grooving blade engineered for turning applications using GTN 4 indexable inserts; suited to workshop and production environments where reliable repeatability is required Compatible with GTN 4 inserts 110 mm overall length Cutting height 21.4 mm Blade width 3.45 mm Accurate parting through stable geometry and clear dimensions The KL24TM offers a clearly defined geometry that supports consistent parting and predictable chip control. Its shank height of 26 mm and cutting height of 21.4 mm create a rigid interface with the toolholder, reducing chatter and promoting uniform surface finish. Specified dimensions allow straightforward process planning: the 110 mm overall length gives accessibility in confined turning setups, while the 3.45 mm blade width defines the maximum kerf for parting operations. These measurable values simplify the choice of feeds and speeds and help to maintain cycle-time stability. Faster set-ups and repeatable production thanks to insert compatibility Designed for use with GTN 4 indexable inserts, the blade enables rapid insert changes and standardised clamping routines. The GTN 4 designation refers to a commonly used insert family for grooving/parting tasks, which streamlines stocking and reduces search time for replacements. With an insert-compatible approach, changeovers become a part of predictable maintenance rather than unplanned downtime, supporting higher machine utilisation and improved throughput in short-run and batch production. Integration-friendly design that supports process reliability The linear dimensions and cut-height specification make the blade straightforward to match to typical parting holders. The compact profile assists in minimising tool overhang and therefore lowers bending moments at the cutting interface; this translates into reliable repeatability during repetitive cycles. Information is presented in measurable terms so engineering teams and buyers can compare alternatives objectively and integrate the blade into existing tooling lists without guesswork. For precision parting tasks that require GTN 4 compatibility and stable, repeatable performance, contact Metav Werkzeuge for availability and tailored technical guidance — Metav Werkzeuge ships from Emmerich and offers expert consultancy for smooth integration. Technical Data Article number: KL24TM Designation: Parting blades (Stechschwerter) Brand: Teknik Makina Compatible inserts: GTN 4 ECLASS: 21181018 Numbers / Core technical data Overall length: 110 mm Shank height: 26 mm Cutting height: 21.4 mm Blade width: 3.45 mm Special features Compatible with GTN 4 indexable inserts Compact profile for reduced overhang Suited to parting and grooving turning operations FAQ Which inserts fit this blade? The blade is designed for use with GTN 4 indexable inserts and works with holders specified for that insert family. What are the key dimensions to check before ordering? Check the 110 mm overall length, 26 mm shank height, 21.4 mm cutting height and 3.45 mm blade width to ensure compatibility with the chosen toolholder. Can the blade be used in standard parting holders? The KL24TM is intended for parting and grooving holders compatible with GTN 4 inserts; verification against holder specifications is recommended. Is there a coating specified for this blade? No coating is specified in the technical data for this product; the KL24TM is offered in the basic design listed. How does the KL24TM support repeatable machining? The defined shank and cutting-height dimensions reduce deflection and enable consistent clamping of GTN 4 inserts, which supports repeatable parting cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a high-precision cutting profile, slim kerf and dependable compatibility with Korloy SP 300 inserts for efficient parting operations; combine robust performance and straightforward replacement for predictable cycle times. Order the KL40TM parting blade directly via Metav Werkzeuge or consult the advisors if additional information is required. KL40TM parting blade – 21.4 mm cutting height, 2.45 mm blade width (Teknik Makina) The KL40TM parting blade is a slim, high-precision cutting blade designed for clean parting and cut-off applications with Korloy SP 300 indexable inserts in small to medium turning operations. KL40TM parting blade by Teknik Makina Compatible with Korloy SP 300 inserts Cutting height 21.4 mm for precise parting Narrow blade width 2.45 mm for minimal waste Consistent separation with defined cutting height The blade offers a cutting height of 21.4 mm, which provides a defined reference for repeatable parting depths and reduces set-up time in serial turning processes. A fixed cutting height simplifies insert selection and holder set-up, so cycle-to-cycle variation is minimised. The controlled geometry helps to limit chatter and promotes a consistent chip flow, translating into fewer rejects and more predictable throughput for production-focused workshops. Slim kerf for reduced material loss and faster throughput With a blade width of 2.45 mm, material removal during parting is kept to a minimum, improving material utilisation and decreasing secondary finishing work. The slim kerf also reduces cutting forces, which often results in longer insert life and lower power draw at the spindle. For operations where scrap reduction and high repeatability matter, this compact profile supports efficient processing without compromising stability. Proven compatibility for fast replacement cycles Designed to accept Korloy SP 300 style inserts, the blade fits into common parting holders used across industrial lathe fleets. Compatibility with established insert systems means stocking can be streamlined and changeovers performed quickly. The 110 mm overall length and a blade height of 26 mm provide a standard footprint that integrates easily into existing holders and clamping blocks, supporting rapid replacement and minimal downtime. Practical workshop benefits and selection guidance The parting blade’s straightforward specification — precise cutting height, narrow blade width and standard length — permits clear selection in procurement and maintenance planning. For workshops seeking to harmonise stocking across brands, the KL40TM offers a familiar interface with Korloy inserts while delivering the expected precision and robustness from Teknik Makina. For guidance on toolholder compatibility or to confirm the best insert grade for specific materials, consult the technical advisors at Metav Werkzeuge. For expert advice on selecting the right Teknik Makina KL40TM parting blades and to arrange delivery from Metav Werkzeuge’s Emmerich stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultants are available to assist with application-specific recommendations. Technical Data Article number: KL40TM Manufacturer: Teknik Makina Dimensions Overall length: 110 mm Blade height: 26 mm Cutting height: 21.4 mm Blade width: 2.45 mm Compatibility & features For indexable inserts: SP 300 Compatible with Korloy inserts Storytrigger: stechschwert SKU: KL40TM FAQ Which insert type fits this parting blade? The KL40TM parting blade is specified for Korloy SP 300 indexable inserts and is designed to accept that insert geometry for reliable seating and performance. What are the key dimensions to check before fitting? Check the cutting height of 21.4 mm, blade height 26 mm and the overall length of 110 mm to ensure correct alignment in the toolholder for the KL40TM. Is the blade suitable for narrow stock and small-diameter parts? The narrow 2.45 mm blade width reduces the kerf and is well suited to applications where material saving and minimal stock removal are priorities with the KL40TM. How does the slim kerf affect insert life? A slim kerf at 2.45 mm typically lowers cutting forces and vibration, which can prolong insert life when the KL40TM is used with appropriate cutting parameters. Can the KL40TM be used with standard parting holders? The KL40TM’s standardised length and height make it compatible with widely used parting holders that accept SP 300-style inserts, allowing straightforward replacement in most setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of accurate parting with a 21.4 mm cutting height and a slim 2.45 mm blade width for reduced material waste and reliable chip control; order the parting blade directly via Metav Werkzeuge or contact the consultants for application support. Parting blade KL38TM — precision parting blade with 21.4 mm cutting height (Teknik Makina) A precision parting blade for lathe and turning operations, the Parting blade KL38TM is designed for narrow kerf cutting and stable clamping in medium-duty workshop and CNC environments. Precision parting with 21.4 mm cutting height Narrow 2.45 mm blade for minimal kerf Robust 26 mm blade shank height Compatible with KGMN 300 Korloy inserts Consistent, low-kerf parting for efficient material use The KL38TM parting blade delivers precise separation thanks to its 21.4 mm cutting height and slender 2.45 mm blade width. A reduced kerf means less material loss per cut and lower cutting forces, which translates into quieter operation and fewer secondary finishing steps. Compatibility with KGMN 300 inserts from Korloy ensures a predictable cutting geometry; the insert type defines the edge radius and chip control, so insertion and replacement are straightforward for standardised parting tasks. Stable support for predictable tool life and surface quality A 26 mm shank height and overall length of 110 mm provide a rigid mounting that reduces chatter and vibration during parting. This stiffness supports consistent surface finish on the parted face and extends insert life by limiting uncontrolled tool deflection. The specified maximum cutting depth of 36 mm indicates the practical reach for deeper parting operations without compromising clamping security, making the blade suitable for many routine turning and slotting procedures where stability is essential. Seamless workshop integration and adaptable use The KL38TM integrates into existing toolholders that accept KGMN 300-style inserts, simplifying changeover and keeping machine idle time low. As a standardised parting solution from Teknik Makina, the blade is suited to both manual lathe shops and CNC turning centres that demand repeatable results. The compact profile supports tight workpiece layouts and makes the blade a cost-effective option for operations requiring frequent parting with minimal setup complexity. For tailored advice on integrating the Teknik Makina KL38TM parting blade into specific turning operations, contact Metav Werkzeuge for consultancy and reliable supply from Emmerich. Technical data Article number: KL38TM Designation: Parting blade Manufacturer: Teknik Makina Core dimensions Blade height: 26 mm Cutting height: 21.4 mm Blade width: 2.45 mm Length: 110 mm Max cutting depth: 36 mm Compatibility & features Compatible insert: KGMN 300 Suitable inserts manufacturer: Korloy Intended use: parting / slotting Manufacturer SKU: KL38TM FAQ What insert type fits this parting blade? The KL38TM parting blade is designed for use with KGMN 300 inserts and is compatible with Korloy KGMN 300 insert geometries. What is the maximum cutting depth for the blade? The maximum practical cutting depth for the KL38TM parting blade is 36 mm, as specified for deeper parting operations. Which machines and applications suit this blade? This parting blade from Teknik Makina is suitable for manual lathes and CNC turning centres where standard KGMN 300 inserts are used for parting and narrow-slot cutting. How does the blade profile affect material waste? The 2.45 mm blade width produces a narrow kerf, reducing material loss per cut and lowering downstream machining and finishing effort. Is the KL38TM suitable for heavy interrupted cuts? The KL38TM offers a robust 26 mm shank height for improved stability, but suitability for heavily interrupted cuts depends on specific machine rigidity and clamping; evaluate setup conditions when planning aggressive cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable drilling with a compact, indexable design and reliable shank stability; the compatibility with Korloy WCM-0302 inserts reduces tooling costs and simplifies maintenance — order via Metav Werkzeuge or consult the team for specification matching. Teknik Makina Insert drill U107TM — Ø 19 mm, 115 mm overall length A robust Insert drill U107TM engineered for indexable insert drilling in general machining applications, offering secure clamping and economical insert replacement. Compatible with Korloy WCM-0302 inserts Precision Ø 19 mm cutting diameter 25 mm shank for stable clamping Cutting length 38 mm for through operations Built for stable, repeatable drilling in production The Insert drill U107TM from Teknik Makina combines a compact footprint with measurable stability: a 25 mm shank and low mass of 0.312 kg support reliable toolholding and reduced runout. With a Ø 19 mm cutting diameter and 115 mm overall length, the tool body is designed to keep concentricity high across repeated cycles. Compatibility with Korloy WCM-0302 inserts ensures consistent edge geometry and straightforward indexability, which together improve process repeatability and reduce scrap rates. Productivity gains through replaceable inserts and quick handling Replacing worn cutting edges instead of the complete tool body lowers lifecycle costs and machine downtime. The cutting length 38 mm is optimised for medium penetration while the 25 mm shank offers increased clamping security in standard holders. These characteristics translate into higher spindle uptime and predictable tool-change intervals. Where faster throughput and predictable tool budgets matter, this indexable approach delivers a clear economic advantage without complex retrofit work. Easy integration with Metav supply and expert advice Integration into existing tool holders and machining cells is straightforward thanks to the standard shank dimensions and the use of widely available Korloy inserts. Metav serves as a pragmatic supply partner from Emmerich, providing a wide range of compatible tooling and a transparent logistics chain. The combination of practical tool design and a dependable supplier network supports continuous production and reduces administrative overhead when replenishing inserts or tool bodies. Contact Metav Werkzeuge for tailored technical advice and secure supply of the Teknik Makina U107TM, compatible with Korloy WCM-0302 inserts — call +49 2822 7131930 or eMail info@metav-werkzeuge.com for swift, professional assistance Technical data SKU: U107TM Manufacturer: Teknik Makina Diameter: 19 mm Overall length: 115 mm Weight: 0.312 kg Data Cutting length: 38 mm Shank diameter: 25 mm Shank length: 56 mm Compatible insert type: WCM-0302 Compatible insert manufacturer: Korloy Special features Indexable insert drill body Compatible with Korloy WCM-0302 inserts Designed for stable clamping and repeatable performance Manufacturer: Teknik Makina FAQ Which inserts fit this drill? The drill body accepts Korloy WCM-0302 inserts; Tekinik Makina’s U107TM is configured for those insert sizes and seat geometry. What are the principal dimensions to check for holder compatibility? Key dimensions: Ø 19 mm cutting diameter, cutting length 38 mm, overall length 115 mm, shank diameter 25 mm; the SKU is U107TM. Which shank holder is required? A holder or collet compatible with a 25 mm shank is required for secure clamping when using the U107TM tool body. How does insert replacement affect downtime? Indexable inserts such as the WCM-0302 reduce downtime because worn edges are replaced quickly without swapping the entire tool body, keeping machines productive. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com