Gibt es einen Hahn und Kolb Online Shop?

Benefit from precise CCMT 0602 compatibility and a four-piece SCLCL 06 holder range that reduces tool changeovers and streamlines internal turning operations. Order the boring bar set directly via Metav Werkzeuge or request technical advice from their consultants for application-specific configuration. Boring Bar Set for CCMT 0602 Indexable Inserts — 4-piece SCLCL 06 holders by Teknik Makina A Boring Bar Set for CCMT 0602 Indexable Inserts designed to cover a range of bore sizes with robust SCLCL 06 clamping for repeatable performance. Compatible with CCMT 0602 inserts Four-piece SCLCL 06 holder set Incremental shank sizes for bore versatility Industrial toolholders by Teknik Makina Precision compatibility that shortens setup time The set delivers reliable compatibility with CCMT 0602 indexable inserts, enabling rapid insertion and secure clamping without additional modifications. Because the holders share the SCLCL 06 interface, insert changes are straightforward and repeatable, which reduces downtime during batch changes. For workshops converting between several component families, this standardised clamping approach simplifies tooling logistics and reduces the need for bespoke adapters. Practical coverage across common bore operations Containing four holders with incremental shank sizes, the collection provides a practical span of reach and rigidity for internal turning tasks. The included items — listed as A06-08H, A08-10J, A10-12K and A12-16M — are organised to match progressively larger bore diameters, so investment in the set avoids multiple single-item purchases. This configuration supports efficient stock management and speeds up the selection process on the shop floor while maintaining the stability required for consistent surface finish. Simple explanation of technical terms and workshop benefits For those less familiar with cutter geometry: indexable inserts are replaceable cutting tips that reduce tooling cost per part; SCLCL denotes the holder style and clamping orientation, chosen here for its balance of access and stiffness. Selecting a matched holder set improves process predictability and helps maintain tolerances across production runs. The set’s design focuses on practical handling, repeatable clamping and minimised changeover effort, translating to better uptime and lower overall tooling expenditure. Contact Metav Werkzeuge for a tailored recommendation or to check insert pairing and holder compatibility; Metav Werkzeuge can advise on the best configuration for specific bore ranges and machining strategies. Technical Data Article number: IPS08TM Product type: Boring bar set Brand: Teknik Makina Compatibility: CCMT 0602 indexable inserts Contents: A06-08H SCLCL 06; A08-10J SCLCL 06; A10-12K SCLCL 06; A12-16M SCLCL 06 Facts Pieces per set: 4 eClass: 21189217 SKU: IPS08TM Special features SCLCL 06 holder interface Designed for CCMT 0602 inserts Incremental shank sizes for bore versatility Supplied as a matched set by Teknik Makina FAQ Are the holders compatible with CCMT 0602 inserts? Yes. The Boring Bar Set for CCMT 0602 Indexable Inserts is configured specifically for CCMT 0602 indexable inserts and uses the SCLCL 06 holder interface. How many pieces are included in the set? The set contains four holders: A06-08H SCLCL 06, A08-10J SCLCL 06, A10-12K SCLCL 06 and A12-16M SCLCL 06 (SKU IPS08TM). Is this set suitable for high-production environments? The matched holder design and standardised insert compatibility support repeatable changeovers and predictable outcomes, making the set appropriate for production contexts that require consistent tool behaviour. Can the set reduce tooling inventory complexity? Yes. By providing incremental shank sizes in one package and a common clamping interface, the set reduces the number of individual toolholders required on the shelf. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the secure M2 thread and a Ø 2.8 mm shank combined with a low-profile 4.2 mm overall length for compact, reliable fastening; order directly via Metav Werkzeuge or consult our specialists for application advice. Torx screw TC058TM – M2 thread, Ø 2.8 mm, 4.2 mm length (Teknik Makina) The Torx screw TC058TM is a small, precision fastener intended for compact assemblies where reliable torque transfer and low profile are required M2 metric thread for fine assemblies Ø 2.8 mm shank for compact fastening 4.2 mm overall length for low-profile joins Torx drive compatible with T6 tool Precision fastening for miniature assemblies that last Small components demand consistent fixing. With an M2 metric thread and a Ø 2.8 mm shank, this screw delivers secure clamping in confined spaces while minimising material stress. The 4.2 mm overall length reduces protrusion, making it suitable for electronics housings, instrument panels and precision brackets. By specifying a standard metric thread, interchangeability and traceability in production are supported, simplifying inventory control and assembly planning. Efficient drive and consistent torque transfer for repeatable results The Torx drive geometry is engineered for axial engagement and reduced cam‑out, which improves torque application and reduces the risk of driver slippage. Compatibility with a T6 tool ensures accurate engagement in manual and powered assembly processes; this translates into faster installation times and lower rework rates. Where repeated tightening cycles are required, the combination of the Torx interface and fine M2 thread delivers reproducible clamping force and fewer damaged heads. Seamless workshop integration and procurement confidence Lightweight and compact, the fastener is supplied under SKU TC058TM by Teknik Makina and is suited to sectors that prioritise miniaturised, reliable joins. The listed mass of 0.1 kg supports straightforward handling and stocking decisions; Metav’s logistics and quality control act as a regional quality filter, ensuring consistent availability for production and maintenance demands. Specification with recognised metrics and drive types allows easy inclusion into bills of materials and maintenance spares lists. Secure supply and expert advice from Metav Werkzeuge are available for this Teknik Makina fastener — contact our procurement team at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and lead times Technical Data SKU: TC058TM Thread: M2 Diameter: 2.8 mm Overall length: 4.2 mm Weight: 0.1 kg Angle: 60° Core measurements Diameter: 2.8 mm Length: 4.2 mm Thread size: M2 Angle: 60° Mass: 0.1 kg Features and compatibility Drive type: Torx Recommended tool: T6 key Brand: Teknik Makina Application: compact and precision assemblies FAQ What are the exact dimensions and thread of this screw? The Torx screw TC058TM is specified with an M2 thread, a shaft diameter of 2.8 mm and an overall length of 4.2 mm (SKU TC058TM from Teknik Makina). Which driver is recommended for installation? A T6 Torx key or driver is specified for secure engagement with the Torx drive, delivering improved torque transfer and reduced cam‑out during assembly. For which applications is this fastener suitable? This fastener is suitable for electronics enclosures, precision instruments and other compact assemblies where a low‑profile, reliable fixing is required. What is the supplied weight figure for this item? The product data provides a mass of 0.1 kg, which should be considered when planning inventory or packaging. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact M2.5 thread and 3.5 mm diameter provide secure fixing in confined assemblies; order the fastener via Metav Werkzeuge or consult our advisers for specification checks. Torx screw TC059-1TM — M2.5 thread, 3.5 mm diameter (Teknik Makina) The Torx screw TC059-1TM is a compact fastening component designed for precision assemblies and small-scale mechanical applications. M2.5 metric thread 3.5 mm diameter shank Overall length 4.7 mm 60° head angle Precise thread geometry for reliable clamping The compact metric M2.5 profile combines fine pitch with consistent engagement, which is ideal where a tight fit is required in small assemblies. The nominal 3.5 mm diameter offers an accurate seating diameter that reduces lateral play; this means repeatable alignment and reduced risk of micro-movement in precision components. Where a secure mechanical joint is required, the defined thread form ensures predictable torque-to-clamp behaviour and straightforward verification during assembly control. Drive and head design that supports efficient assembly The drive compatibility and head geometry are crafted for repeatable installation. The drive accepts a T8 key, enabling direct torque application with minimal slippage, which supports fast, controlled tightening in confined work areas. The 60° head angle is specified for conical seating in matching recesses, allowing the fastener to sit flush when required and reducing protrusion that might interfere with nearby components. These attributes reduce rework and contribute to faster, more reliable production cycles. Small size, broad industrial use and quality provenance As a small-format fastener, the component is suited to compact machinery, instruments and subassemblies where space is at a premium. The listed mass of 0.1 kg corresponds to the packaged unit as supplied; handling and storage are straightforward for workshop logistics. The part is supplied by Teknik Makina and is intended for consistent performance in repetitive assembly environments; traceable manufacturing and a clear article identity support quality control and inventory management. For batch enquiries, technical clarifications or to request an order for the Teknik Makina Torx screw TC059-1TM, contact Metav Werkzeuge in Emmerich for advice and specification verification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC059-1TM Manufacturer: Teknik Makina eClass: 21189290 Dimensions & core data Diameter: 3.5 mm Thread: M2.5 Overall length: 4.7 mm Head angle: 60° Weight: 0.1 kg Versions & special features Drive compatibility: compatible with T8 key Intended use: compact precision fastening FAQ What are the main dimensions of this fastener? The Torx screw TC059-1TM from Teknik Makina has a 3.5 mm diameter, an M2.5 thread and an overall length of 4.7 mm. Which tool fits the drive of this screw? This fastener accepts a T8 key, as specified for TC059-1TM by Teknik Makina. What is the head geometry of the screw? The screw features a 60° head angle, allowing seating in conical recesses when installed. Is this screw suitable for small precision assemblies? Yes; the fine M2.5 thread and compact 3.5 mm diameter make the TC059-1TM suitable for precision subassemblies and confined installation spaces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise metric threading and a compact head design for secure, space-saving fixings in production and maintenance environments; combine M3.5 thread reliability with Torx T10 drive efficiency for improved torque transfer and minimal cam‑out. Order the Torx screw TC069TM directly via Metav Werkzeuge or ask the consultants if needed Torx screw TC069TM – M3.5 thread, Torx T10 compatible (Teknik Makina) The Torx screw TC069TM is a compact fastener engineered for precision assemblies and workshop use, offering a robust Torx drive and a low-profile head for flush installation in tight spaces Torx drive T10 compatible M3.5 metric thread for standard fittings 4.8 mm head diameter for secure seating 8.5 mm total length for compact assemblies Consistent clamping with metric threading for industrial use The metric M3.5 thread delivers repeatable clamping performance across batch production and maintenance work, reducing variation in assembly torque and ensuring predictable joint behaviour. As a standardised specification, the M3.5 thread simplifies parts sourcing and inspection routines, supporting quality control processes and minimising downtime caused by mismatched fasteners. The design promotes reliable preload while remaining compatible with common metric toolsets used in workshops and small-scale manufacturing. Space-saving head and secure seating for flush assemblies With a 4.8 mm head diameter and a 60° head angle, the fastener provides a low-profile finish that seats cleanly into countersunk holes, producing a flush surface that prevents interference with moving parts or adjacent components. The Torx T10 interface enhances torque transfer, reducing cam‑out and allowing tighter, more consistent tightening without damage to the driver or head. This combination of compact geometry and drive reliability benefits applications where both aesthetics and mechanical clearance are important. Practical handling and workshop compatibility that speeds assembly The short 8.5 mm overall length makes the screw suitable for thin panels, instrument housings and precision fixtures where excessive thread engagement must be avoided. Compatibility with a Torx T10 driver streamlines assembly lines and on-site maintenance by using a common, high‑grip bit rather than slotted or Phillips alternatives. For procurement and inventory management, the clearly specified dimensions assist in creating unambiguous part lists and reduce the risk of assembly errors in production or repair contexts. For secure, repeatable fixings, choose the Teknik Makina Torx screw TC069TM and contact Metav Werkzeuge for ordering or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TC069TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg Head diameter: 4.8 mm Thread: M3.5 Total length: 8.5 mm Head angle: 60° Special features Torx T10 drive compatibility Compact, low‑profile head for flush seating Suited to precision assemblies and workshop applications ECLASS: 21189290 FAQ What driver is required for installation? The fastener is designed for a Torx T10 driver; the Torx interface provides improved torque transfer for reliable tightening of the TC069TM screw. What are the key dimensions to check for fit? Verify the 4.8 mm head diameter, M3.5 thread and 8.5 mm overall length to ensure correct seating and thread engagement for the application. Is this screw suitable for thin sheet metal and instrument housings? Yes — the short overall length and low‑profile head make the screw appropriate for thin panels and precision housings where a flush finish is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑rigidity tool head that delivers precise 90° shoulder milling and fast insert changes; the combination of a 16 mm shank, ø40 mm head and compatibility with APKT 1003 indexable inserts ensures stable cuts and consistent cycle times. Order via Metav Werkzeuge or consult product specialists for application-specific advice. Corner milling head – 90° head for APKT 1003 indexable inserts (Teknik Cutting Tools) The corner milling head is a 90° indexable tool head designed for precise shoulder and face milling with APKT 1003 inserts, suitable for compact toolholders and stiff machine setups. 90° cutting angle for precise shoulder milling Fits APKT 1003 indexable inserts by Korloy 16 mm shank, ø40 mm head for compact setups Secured with M2.5×5.5 Torx screw (T8) Consistent shoulder accuracy with minimal runout The compact indexable tool head has been engineered for repeatable shoulder and face milling, where a true 90° geometry reduces secondary operations. The combination of a 16 mm shank and a ø40 mm head delivers high rigidity, so cutting forces are transmitted cleanly into the holder and machine spindle. This stability translates into improved surface quality and dimensional adherence, lowering rework rates and keeping cycle times stable across batch runs. Familiar machining terminology is used throughout so decision making is straightforward for production planners and operators. Quick insert changes and reliable clamping minimise downtime Compatibility with APKT 1003 indexable inserts from Korloy supports familiar tooling standards and simplifies inventory management. The insert is secured by an M2.5×5.5 Torx screw and fitted using a T8 key, providing a dependable clamping method that avoids accidental loosening under heavy feed. Fewer and faster insert changes mean shorter tool‑change intervals on the shop floor and higher machine availability. Technical queries and requests for additional data are handled through Metav Werkzeuge’s consultancy services to support integration into existing tool setups. Compact footprint for versatile machine application With an overall length of 40 mm and a head diameter of 40 mm, the head’s compact form factor suits confined tool magazines and close‑quarter toolholders without compromising stiffness. The nominal mass of 0.277 kg balances inertial forces while remaining light enough for quick handling during setup. Designed for industrial use, the head supports practical shop workflows and is compatible with common indexable insert geometries, helping to rationalise tooling across milling operations and reduce supplier complexity. Contact Metav Werkzeuge for application recommendations, stock status and tailored advice on integrating the Teknik Cutting Tools corner milling head T176TM into existing machining centres Technical data Article number: T176TM Designation: Corner milling head for APKT 1003 indexable inserts Brand: Teknik Cutting Tools (Teknik Makina) Facts Shank diameter: 16 mm Head diameter: 40 mm Overall length: 40 mm Weight: 0.277 kg Cutting angle: 90° Cutting edges: 5 Special features Compatible with APKT 1003 indexable inserts (Korloy) Secured with M2.5×5.5 Torx screw; Torx key T8 Compact design for confined toolholders FAQ Which inserts fit the tool head? The head accepts APKT 1003 indexable inserts; compatibility is confirmed for Korloy inserts designed to that designation. What mounting shank is required? A 16 mm shank holder is required; the head was manufactured for use with 16 mm toolholders and compact setups. How is the insert fixed to the head? The insert is clamped using an M2.5×5.5 Torx screw and tightened with a T8 key for secure retention during milling. Is the head suitable for heavy roughing operations? The compact geometry and high rigidity make the head well suited to common shoulder and face milling tasks; selection should be matched to machine power and feed rates for optimal life. What are the key dimensions to check before ordering? Verify the 16 mm shank, ø40 mm head, and overall length 40 mm against the machine’s toolholder envelope and magazine capacity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, a defined 90° cutting geometry and compatibility with ADKT 1505 indexable inserts to maintain steady cycle times and predictable tool life; order the Corner tool head directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head T200TM — 90° tool head for ADKT 1505 indexable inserts (Teknik Makina) A Corner tool head T200TM engineered for turning and facing operations with ADKT 1505 indexable inserts, delivering repeatable 90° cutting performance in industrial production environments 90° cutting geometry for precise facing Compatible with ISCAR ADKT 1505 inserts 16 mm shank for secure clamping Four cutting edges for extended service life Accurate 90° geometry for repeatable faces and shoulders The T200TM is built around a 90° cutting geometry that simplifies setup for facing and shoulder operations. By using standard ADKT 1505 indexable inserts (compatible with ISCAR), the head provides a predictable cutting line and consistent surface finish. The combination of defined insert seating and the head’s rigid interface reduces vibration and improves dimensional repeatability, which translates into fewer reworks and steadier production throughput. Secure clamping and straightforward maintenance for reliable shifts Clamping integrity is central to performance: the head features a 16 mm shank that ensures stable seating in standard toolholders and a fixation system secured with an M4x10 Torx screw operated by a T15 key. This arrangement keeps the insert pocket firmly closed under load and facilitates fast index changes. Routine service is minimal — the Torx connection limits cam-out and wear, so maintenance intervals are extended without sacrificing operational safety. Compact design engineered for industrial use A compact footprint supports versatile machine integration: the head measures 40 mm diameter with a 45 mm overall length and weighs 0.27 kg, making it suitable where clearance and balance are critical. The small mass contributes to lower centrifugal forces at speed and helps preserve spindle bearings, while the robust construction and first-class metalworking in the component ensure long in-service life. The presence of four cutting edges on the selected inserts allows multiple indexes per insert, improving cost-efficiency per cutting edge. Practical application advice to speed setup and reduce downtime The indexable-head concept streamlines production: replace worn inserts quickly and restore cutting performance without reclamping the entire assembly. For facing, ensure the toolholder accepts the 16 mm shank and that the insert seat is clean before fitting a fresh ADKT 1505 insert. Correct torque on the M4x10 Torx screw and the use of the T15 key secure the insert and prevent micro-movement during heavy cuts. This pragmatic approach to handling reduces set-up time and keeps machines cutting rather than idling. Contact Metav Werkzeuge today for personalised application support on the Teknik Makina T200TM 90° corner tool head and secure delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T200TM Brand: Teknik Makina Product: Corner tool head for ADKT 1505 indexable inserts Shank diameter: 16 mm Overall length: 45 mm Diameter: 40 mm Weight: 0.27 kg Cutting angle: 90° Cutting edges: 4 Torx screw: M4x10 Torx key: T15 Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Application: Turning / facing with indexable inserts Design: 90° corner head Notes: First-class metalworking, long service life FAQ What inserts fit this turning head? The Corner tool head T200TM is designed for ADKT 1505 indexable inserts; it is compatible with inserts from ISCAR marked ADKT 1505. Is a special key required to change the insert? An M4x10 Torx screw secures the insert; a T15 Torx key is used to tighten and release it on the T200TM. Which toolholder accepts the head’s shank? The head has a 16 mm shank diameter and requires a toolholder that accepts a 16 mm shank for safe clamping and correct tool alignment. What benefits do four cutting edges provide? Using inserts with four usable edges increases effective cutting life per insert and reduces index-change frequency, improving uptime with the T200TM head. Is the head suitable for heavy-duty facing? The compact, rigid design and secure Torx clamping make the head appropriate for standard facing loads; ensure the machine and holder match the required cutting parameters. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid 90° corner tool head that combines precise shoulder finishes, fast insert changes and standard shank compatibility to keep cycle times consistent; order the tool via Metav Werkzeuge or consult the technical team for application guidance. Eckmesserkopf T533TM — 90° corner tool head for BDMT 11T3, Ø40, shank 16 mm (Teknik Makina) The Eckmesserkopf T533TM is a 90° corner turning head designed for use with BDMT 11T3 indexable inserts, intended for accurate shoulder turning and external profiling in general workshop and production turning applications 90° cutting angle for accurate shoulder turning Compatible with BDMT 11T3 Kyocera inserts 16 mm shank for standard toolholders M2.5x5.5 Torx fastening, T8 key required Consistent shoulder quality through rigid geometry The 90° construction delivers a repeatable contact geometry that reduces vibration and variation at the cut; the 90° cutting angle and compact head body provide a stable platform for finishing shoulders and steps. Compatibility with BDMT 11T3 indexable inserts means the tool head benefits from standardised insert geometry, allowing predictable cutting engagement and surface finish. With a head Ø40 mm and a balanced mass of 0.224 kg, the turning head minimises deflection while remaining easy to handle during setup. The result is improved process reliability and fewer reworks in series production. Faster insert clamping and low-maintenance service routines Clamping is secured by an M2.5x5.5 Torx screw and requires a T8 key, enabling quick insert changes and shortened downtime between operations. The head provides five cutting edges per insert seat, extending time between indexings and lowering consumable costs per component. The simple fastening routine and standardised hardware reduce toolroom complexity and mean familiar maintenance procedures can be followed without special tooling. This efficiency contributes directly to higher machine availability and lower operational overhead. Stock and machine compatibility for streamlined procurement With a 16 mm shank diameter and a nominal head diameter of Ø40 mm, the unit fits a broad range of standard turning toolholders and turret systems, supporting modular tool setups across different machine types. The compact overall length (40 mm) helps manage tool projection and minimise overhang, which is beneficial for spindle load and surface integrity. Compatibility with Kyocera BDMT-style inserts simplifies spare parts management and allows purchasing teams to consolidate insert stock, improving inventory turnover and procurement predictability. Reliable choice for demanding turning tasks Built for routine workshop use, the head combines straightforward mechanical design with established insert standards to deliver dependable results in shoulder turning and profiling tasks. The clear indexable system and standard fastenings mean operators can focus on cutting parameters rather than special tool handling. When fitted into a controlled process, this configuration supports consistent part tolerances and repeatable cycle times, which is essential for efficient batch production and quality assurance. For precision 90° turning with proven compatibility, request supply and application advice for the Teknik Makina T533TM from Metav Werkzeuge — technical enquiries: info@metav-werkzeuge.com or tel. +49 2822 7131930 Technical data Article number: T533TM Manufacturer: Teknik Makina Product: Eckmesserkopf for BDMT 11T3 indexable inserts Dimensions & weights Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Weight: 0.224 kg Cutting angle: 90° Features & compatibility For BDMT 11T3 indexable inserts Compatible insert manufacturer: Kyocera Torx screw: M2,5x5,5 Torx key: T8 Number of usable cutting edges: 5 SKU: T533TM FAQ Which inserts fit this corner tool head? The corner tool head accepts BDMT 11T3 indexable inserts and is specified as compatible with Kyocera BDMT 11T3 inserts. What shank size is required for mounting? Mounting requires a toolholder or turret accepting a 16 mm shank diameter, matching standard 16 mm toolposts. How is the insert secured in the head? The insert is clamped with an M2.5x5.5 Torx screw; a T8 key is used for tightening and removal. Is the head suitable for high-speed turning? The design offers good rigidity for many turning operations; cutting speed suitability depends on insert grade and machine capabilities rather than the head alone. What are the key dimensions to check before ordering? Important dimensions are head Ø40 mm, overall length 40 mm, and shank 16 mm; the SKU is T533TM for ordering clarity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, 90° indexable insert head that combines sturdy clamping and simple fastening for repeatable turning operations; its 16 mm shank and 40 mm diameter reduce overhang for greater rigidity. Order the component directly via Metav Werkzeuge or consult the team for application-specific advice. Corner tool head T550TM — 90° head for APKT 1705 indexable inserts (Teknik Makina) The Corner tool head T550TM is a compact 90° turning head designed for APKT 1705 indexable inserts, intended for precise external turning where limited clearance and secure fastening are required 90° cutting geometry for perpendicular turning Compatible with APKT 1705 indexable inserts 16 mm shank for compact toolholder setups Torx M4x10 fastening, T15 key required Stable perpendicular cuts for reliable process results The 90° geometry provides a predictable cutting orientation that is especially useful where perpendicular shoulders or facing operations are frequent; by accepting APKT 1705 indexable inserts, the head ensures rapid insert changes without regrinding, shortening machine downtime. This configuration supports a controlled cutting edge position and straightforward reorientation, which translates into consistent component dimensions and reduced rework in batch production. The design focuses on operational stability rather than decorative details, so setup time is minimised and repeatability is improved. Compact dimensions for reduced overhang and better rigidity With a 16 mm shank, 45 mm overall length and 40 mm diameter, the tool head suits tight toolpost arrangements and compact lathes. The relatively low mass (0.239 kg) and restrained projection lower bending moments at the holder, which helps to reduce chatter and improves surface finish on the workpiece. In practice, the compact form factor allows shops to maintain higher feed rates in constrained spaces while keeping the cutting forces aligned — a straightforward way to raise productivity on small to medium-sized turning centres. Secure fastening and fast changeover to keep production running Fastening is handled with an M4x10 Torx screw and requires a T15 key, delivering reliable clamp force and minimising slippage under load. The Torx interface offers better torque transfer and less cam‑out than conventional crosshead screws, so clamping is both secure and repeatable. The head is specified to work with Taegutec inserts in the APKT 1705 format, allowing straightforward procurement and replacement. This combination of secure fixing and standardised insert format reduces downtime during tool changes and supports stable process control over longer production runs. Contact Metav Werkzeuge for tailored application advice and secure supply of the T550TM corner tool head; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: T550TM Manufacturer: Teknik Makina Product: Corner tool head (Eckmesserkopf) Compatibility: for APKT 1705 indexable inserts Compatible insert brand: Taegutec ECLASS: 21181015 Core dimensions and weights Shank diameter: 16 mm Diameter: 40 mm Overall length: 45 mm Cutting angle: 90° Number of cutting edges: 4 Weight: 0.239 kg Features and fastening Fastening screw: M4x10 Torx Torx key: T15 Intended application: turning, facing with indexable inserts SKU reference: T550TM Manufacturer: Teknik Makina FAQ What inserts fit this tool head? The tool head accepts APKT 1705 indexable inserts; the T550TM is specified for that insert format and is compatible with Taegutec APKT 1705 types. What shank size is required for the toolpost? This turning head uses a 16 mm shank, so the toolholder or turret pocket must accommodate a 16 mm shank diameter. Which screw and key secure the insert head? Fixing is via an M4x10 Torx screw; a T15 key is required for tightening and loosening. Is the T550TM suitable for compact lathes? Yes, the compact dimensions (40 mm diameter, 45 mm overall length) and modest weight make the T550TM well suited to confined toolpost arrangements on smaller lathes. How many cutting edges are provided? The specification lists 4 cutting edges; insert geometry and edge count depend on the APKT 1705 inserts used. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, 90° cutting geometry and proven compatibility with BDMT 1704 indexable inserts to ensure efficient shoulder machining and reliable repeatability. The robust 16 mm shank and Ø40 mm head deliver a stable tool position with quick insert changes; order the component directly via Metav Werkzeuge or consult their specialists for application advice. 90° Corner Cutter Head for BDMT 1704 Indexable Inserts (Teknik Makina) — 16 mm shank, Ø40 mm head A 90° corner cutter head designed for turning and shoulder operations using BDMT 1704 indexable inserts, offering a compact solution for precision facing and grooving tasks Compact 16 mm shank for tight toolholders 90° cutting angle for accurate shoulder cuts Compatible with Kyocera BDMT 1704 inserts Ø40 mm head with four cutting edges Precise shoulder machining with 90° geometry The compact head is engineered for precision during shoulder and face turning. Its 90° cutting angle ensures consistent corner definition and repeatable part geometry, reducing secondary operations. A firm 16 mm shank provides stable clamping in compact holders, which helps to limit vibration and improve surface finish. This combination is particularly suitable for medium to high-volume production where cycle-time stability is essential. Fast insert changes and proven insert compatibility Designed for BDMT 1704 indexable inserts, the head supports rapid edge changes and predictable tool life. The insert system, compatible with Kyocera standards, allows multiple index positions from a single insert — a cost-effective approach to keep machine uptime high. The arrangement of four usable cutting edges extends service intervals, while the secure Torx fastening system simplifies maintenance without requiring specialised tools. Compact design that stabilises cutting performance The Ø40 mm head and modest overall length balance reach and stiffness to maintain cutting stability at the workpiece interface. The head’s mass and geometry are optimised to reduce deflection during moderate to heavy cuts, supporting reliable dimensional accuracy. With a weight of 0.19 kg, the assembly is lightweight enough for quick tool changes yet substantial enough to resist chatter in typical turning operations. Maintenance-friendly assembly and fast setup Assembly and replacement are straightforward thanks to the standardised Torx fixings. The head is secured with an M4x10 Torx screw and a T15 Torx key is used for tightening, so a common workshop toolset is sufficient for routine service. Clear mechanical retention and simple fastener access minimise downtime and allow predictable torque application, helping to maintain consistent clamping pressure and cutting geometry. Contact Metav Werkzeuge to confirm suitability for specific applications and to request delivery from their Emmerich quality hub — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: T537TM Manufacturer: Teknik Makina Name: 90° corner cutter head Designation: for BDMT 1704 indexable inserts Facts Shank diameter: 16 mm Head diameter: 40 mm Overall length: 40 mm Weight: 0.19 kg Cutting angle: 90° Cutting edges: 4 Special features Compatible with BDMT 1704 indexable inserts Recommended insert brand: Kyocera Torx screw: M4x10 Torx key size: T15 FAQ What insert type fits this corner cutter head? The corner cutter head is designed for BDMT 1704 indexable inserts, which are compatible with Kyocera-style insert geometries and provide multiple usable edges for economical machining. Is the head suitable for compact toolholders? Yes, the head’s 16 mm shank and compact overall length make it suitable for tight toolholder setups where space is limited but rigidity is required. Which fastener and key are required for insert clamping? Insert and head fixation use an M4x10 Torx screw, tightened with a T15 Torx key, allowing standard workshop tools to perform secure assembly. How many cutting edges are available per insert in this setup? The system supports inserts with four cutting edges, extending service life and reducing the frequency of insert changes during production. Can this head be used with inserts from other manufacturers? The head is specified for BDMT 1704 inserts and lists Kyocera compatibility; inserts from other manufacturers matching the BDMT 1704 geometry may be used if they conform to the same dimensional and seating standards. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability solution for 90° corner turning: the combination of a secure 16 mm shank and SECO-compatible clamping for XOMX 1204 inserts ensures repeatable results and minimal downtime. Order this toolholder through Metav Werkzeuge or consult our team for application-specific guidance. Corner toolholder T510TM – 90° corner toolhead for XOMX 1204 indexable inserts by Teknik Makina Corner toolholder T510TM for 90° turning operations, engineered for precision machining with XOMX 1204 indexable inserts in industrial turning centres 90° cutting angle for precise corner turning SECO-compatible for XOMX 1204 indexable inserts 16 mm shank diameter for stable clamping Torx screw M3.5x8.5 with T10 key specification Reliable 90° corner turning with consistent clamping The T510TM is designed for repetitive corner and shoulder turning where geometric accuracy matters. Its 90° cutting angle offers predictable engagement with the workpiece, reducing vibration and improving surface quality during shoulder cuts. Built around a 16 mm shank, the toolholder provides a secure connection to standard tool posts, which translates into stable cutting conditions and prolonged insert life. The design focuses on reducing setup variation so that cycle-to-cycle repeatability is maintained in batch production. Fast insert changes and system compatibility Engineered for indexable inserts of the XOMX 1204 type, the holder accepts SECO-compatible grades, simplifying procurement and inventory management. The clamping system uses a Torx screw M3.5x8.5 (T10), a commonly available fastening standard that facilitates quick insert replacement and consistent seat pressure. For operations where tool change time and machine uptime are critical, this compatibility and the straightforward screw interface help to keep production flowing with minimal interruption. Compact head geometry for confined setups With a head diameter of 40 mm and a total length of 40 mm, the holder is compact enough to be used in tight turret positions or multi-op setups without compromising rigidity. The compact form factor allows closer approach to workpiece contours and supports multi-insert turning strategies on small to medium workpieces. The relatively low mass of 0.25 kg also reduces centrifugal loading at higher spindle speeds, helping to maintain balance and accuracy in dynamic machining operations. Practical benefits for workshop efficiency Choosing this corner toolhead reduces the number of bespoke holders required for standard XOMX 1204 inserts, streamlining tooling assortments in the workshop. The combination of SECO compatibility, a common T10 Torx interface and a robust 16 mm shank delivers a pragmatic balance of availability, serviceability and performance. For shops focused on steady production with predictable maintenance cycles, that balance supports lower downtime and simpler tool management. Choose the Teknik Makina T510TM for dependable 90° corner turning and contact Metav Werkzeuge for a tailored consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T510TM Manufacturer: Teknik Makina Designation: Corner toolholder for XOMX 1204 indexable inserts Secondary designation: for XOMX 1204 Indexable Inserts eClass: 21181015 Numbers / Core technical data Shank diameter: 16 mm Head diameter: 40 mm Total length: 40 mm Weight: 0.25 kg Cutting angle: 90° Cutting edges: 4 Special features / Versions Compatible with SECO XOMX 1204 indexable inserts Torx screw: M3.5x8.5 Torx key specification: T10 SKU: T510TM FAQ Which inserts fit this toolholder? The toolholder accepts XOMX 1204 indexable inserts and is compatible with SECO-manufactured XOMX 1204 grades for flexible choice of cutting materials and coatings. What shank size is required for mounting? A 16 mm shank diameter is specified for stable clamping; the holder is designed to seat in tool posts that accept a 16 mm shank. What is the cutting angle and typical application? The unit is equipped with a 90° cutting angle, making it suitable for corner turning and shoulder profiling in general turning applications. Which fastening hardware does the holder use? Clamping is achieved using a Torx screw M3.5×8.5; the corresponding key size is T10, which ensures repeatable clamping torque and quick insert changes. Is the toolhead suitable for high-speed turning? The compact geometry and low mass support dynamic stability, but final suitability for high-speed turning depends on machine capability, insert grade and cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust 90° corner solution that accepts Palbit ANHX 1004 indexable inserts and mounts on a 16 mm interface for secure, repeatable results; order or request advice via Metav Werkzeuge for straightforward integration into the production line. Corner tool head — 90° for ANHX 1004 indexable inserts (Teknik Makina T656TM) The corner tool head is a compact 90° turning head designed for external machining and precise corner cuts using ANHX 1004 indexable inserts. Precision 90° cutting angle for corner work Compatible with Palbit ANHX 1004 inserts 16 mm shank for secure toolholder mounting Compact 40 mm head with four cutting edges Maximise turning accuracy with a 90° cutting angle The compact holder provides a 90° cutting angle that keeps cutting forces predictable and concentrates the geometry where corner accuracy matters most. Fitted for ANHX 1004 indexable inserts, this head converts each insert index into renewed cutting life, reducing tool-change frequency and improving uptime. The presence of four cutting edges extends service intervals, while the use of indexable technology keeps machining consistent across batches. The design supports repeatable results in serial turning and intermittent finishing tasks. Secure mounting and quick, reliable clamping A 16 mm shank ensures firm seating in standard toolholders and minimises runout when compared with smaller interfaces; the nominal shank diameter contributes to consistent tool alignment. Clamping is achieved with an M3x7 torx screw and the matching T8 key, providing secure locking without the need for special fixtures. The straightforward fastening arrangement allows fast setup changes and predictable torque behaviour, which helps keep cycle times stable in mixed-production environments. Compact form for confined workspaces and steady performance With a 40 mm head diameter and an overall length of 40 mm, the holder keeps the cutting point close to the spindle centre, improving rigidity and reducing overhang-induced vibration. At approximately 0.25 kg, the assembly is light enough for agile tool changes yet robust enough for everyday workshop use. The compact package is ideal where access is restricted or where multiple tool stations operate in close proximity, enabling efficient nesting of tools without compromise to cutting reliability. Low-maintenance operation and predictable throughput The indexable concept reduces complex maintenance to a few quick actions: index, tighten and resume production. Replaceable inserts mean that wear does not require discarding the entire holder, so shop-floor maintenance is simplified and spare-part inventories remain compact. The holder’s geometry and straightforward fixing method support predictable performance and easier process documentation, helping to plan tool life and control cost-per-part across series production. For fast technical advice and availability of the Teknik Makina T656TM corner tool head, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and delivery from Emmerich Technical data Article number: T656TM Manufacturer: Teknik Makina Suitable for inserts: ANHX 1004 (Palbit) SKU: T656TM Core data Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Cutting angle: 90° Cutting edges: 4 Weight: 0.25 kg Torx screw: M3x7 Torx key: T8 Features For ANHX 1004 indexable inserts Compatible with Palbit inserts 90° corner head geometry Compact design for confined spaces Secure clamp with M3x7 torx screw FAQ Which indexable inserts fit this holder? The T656TM corner tool head accepts Palbit ANHX 1004 indexable inserts and is specified for that insert form. What shank diameter is required for mounting? The holder uses a 16 mm shank interface and is designed for compatible toolholders with that diameter. How many cutting edges are available per insert position? The assembly is built around a head with four cutting edges, enabling multiple indexings before insert replacement. Which screw and key are required for clamping the insert? Clamping is performed with an M3x7 torx screw tightened using a T8 torx key. Is the head suitable for tight access or compact workpieces? Yes — the 40 mm head diameter and 40 mm overall length make the holder suitable for confined machining areas and closely packed tooling setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of right-hand cutting, internal coolant and compatibility with DC-- 11T3 indexable inserts ensures reliable internal machining and stable chip control; order through Metav Werkzeuge or consult the technical team for integration advice. A25R SDUCR Boring Bar – SDUC for DC-- indexable inserts, right-hand, internal coolant (Teknik Cutting Tools) The A25R SDUCR is a right-hand boring bar for internal machining, designed to accept DC-- 11T3 indexable inserts and to run with through-tool coolant for improved chip evacuation Compatible with DC-- 11T3 indexable inserts Internal coolant for reliable chip evacuation Ø40 mm body, 300 mm overall length Right-hand cutting, robust 32 mm shank Stable internal machining with precision geometry The A25R SDUCR holder combines a firm Ø40 mm body with a 32 mm shank to deliver improved rigidity during deep internal operations. The modest overhang and balanced mass reduce chatter and deflection, which translates into consistent bore quality and longer insert life. For workshop managers and production engineers, this means fewer rework cycles and a steadier process window when introducing new workpieces or materials. Reliable chip control through internal coolant Equipped with internal coolant, the holder channels cutting fluid directly to the cutting edge for effective cooling and chip evacuation. This targeted delivery reduces heat at the cutting zone and helps prevent built-up edge on the insert, supporting longer tool life and more predictable surface finishes. In practice, this results in fewer interruptions for manual chip clearing and a smoother machining rhythm on repeat runs. Quick compatibility for standard insert systems Designed specifically for DC-- 11T3 indexable inserts, the SDUC configuration simplifies tool setup and replacement. The insert interface enables straightforward clamping and repeatable positioning, reducing downtime during tool changes. For workshops standardising tooling, the proven insert family provides a cost-effective way to maintain cutting-edge performance across multiple operations. Practical dimensions for production environments With a total length of 300 mm and a cutting height of 45 mm, the holder suits many internal turning and boring situations where reach and stability must be balanced. The geometry supports right-hand cutting at a 93° cutting angle, offering a stable approach for cylindrical features and smaller internal diameters. The substantial mass (approx. 1.924 kg) further contributes to vibration damping in medium-duty to heavy finishing passes. Contact Metav Werkzeuge for expert advice on integrating the Teknik Cutting Tools A25R SDUCR into existing tooling—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA132TM Manufacturer: Teknik Makina ISO designation: A25R SDUCR SKU: KA132TM Core data Diameter: 40 mm Overall length: 300 mm Shank diameter: 32 mm Cutting height: 45 mm Weight: 1.924 kg Cutting angle: 93° Cutting direction: right Compatible inserts: DC-- 11T3 Internal coolant: yes Features SDUC for DC-- indexable inserts Right-hand cutting configuration Designed for internal coolant supply Robust construction for improved stability FAQ Which insert type is required for this holder? The holder accepts DC-- 11T3 indexable inserts; the SDUC seat is designed for secure, repeatable clamping of that insert family. Does the bar allow through-tool coolant? Yes, the toolholder features internal coolant to deliver cutting fluid directly to the cutting edge and support chip evacuation. What are the key dimensions to consider for fixture setup? Important dimensions are Ø40 mm body diameter, 300 mm overall length and a 32 mm shank diameter—these determine clearance and clamping requirements. Is the cutting direction fixed? The holder is configured for right-hand cutting, suited to standard internal turning and boring directions. What is the ISO designation of the toolholder? The ISO designation is A25R SDUCR, indicating the holder geometry and orientation for SDUC-style inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid holder design, precise ISO compatibility and through-tool coolant for consistent internal turning results; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar AP342TM — PCLN holder for CNMG indexable inserts with internal coolant (Teknik Makina) Boring Bar AP342TM is a right-hand PCLN-style holder designed for internal turning with CNMG indexable inserts, combining secure clamping with coolant-through functionality for demanding CNC applications. Internal coolant for reliable cooling and chip control For CNMG 1204 indexable turning inserts Shank diameter 32 mm for stable clamping ISO A32T PCLNR holder, 95° cutting angle Stable clamping and geometric support for consistent bore quality The tool is built around a 32 mm shank and a robust body that reduces deflection during internal turning. This geometry improves repeatability in serial production and supports accurate bore tolerances when machining with indexable tips. The combination of the holder's mass and the specified 95° cutting angle promotes a stable cutting condition and lowers vibration, which translates into improved surface finish and longer insert life for the turning process. Coolant-through design that protects inserts and workpieces Equipped with internal coolant, the holder ensures directed coolant delivery to the cutting edge for effective heat removal and chip evacuation. This feature is particularly valuable in deep boring operations where access for external coolant is limited. By feeding coolant directly to the cutting zone the tool reduces thermal load on the insert and aids consistent chip breaking, helping to maintain dimensional stability and reduce rework in assembly workflows. Wide compatibility with standard indexable inserts and ISO holder form The AP342TM accepts CNMG 1204 indexable inserts and follows the A32T PCLNR ISO designation, making it straightforward to integrate into existing tooling systems and spare-part inventories. Its right-hand cutting orientation suits conventional internal turning cycles in CNC lathes. The standardised interface simplifies insert changes and minimises machine downtime, supporting efficient process chains in jobbing and small-batch production. Contact Metav Werkzeuge in Emmerich for availability and delivery details: info@metav-werkzeuge.com — call +49 2822 7131930 for tailored application advice and stock information Technical data Article number: AP342TM ISO designation: A32T PCLNR Designation: PCLN for CNMG indexable inserts Brand: Teknik Makina Facts Diameter: 40 mm Shank diameter: 32 mm Overall length: 300 mm Cutting height: 50 mm Weight: 1.809 kg Cutting angle: 95° Direction: right-handed Compatible insert: CNMG 1204 Special features Internal coolant (through-tool) With coolant Right-hand cutting direction For CNMG indexable inserts ISO holder type A32T PCLNR FAQ What insert type does this holder accept? This holder is specified for CNMG 1204 indexable inserts and is configured to secure standard CNMG-style tips for internal turning. Is coolant supplied through the holder? Yes, the AP342TM features internal coolant (coolant-through) to direct fluid to the cutting edge for improved cooling and chip control. Which ISO designation identifies the holder form? The tool follows the A32T PCLNR ISO designation, which clarifies the holder form and helps match compatible spares and clamping systems. What are the main dimensions relevant for machine setup? Key dimensions are a 40 mm diameter, 32 mm shank, and 300 mm overall length; the cutting height is 50 mm and the tool weight is 1.809 kg. Is the cutting direction right- or left-handed? The holder is configured for right-handed cutting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of a 32 mm shank, internal coolant and compatibility with DNMG 1506 indexable inserts for stable, repeatable left-hand cutting operations; order the AP312TM directly via Metav Werkzeuge or consult our technical advisors for application support. AP312TM — Left-hand boring bar for DNMG indexable inserts, internal coolant (Teknik Makina) The AP312TM is a left-hand boring bar engineered for precision turning with DNMG 1506 indexable inserts, featuring internal coolant and a solid 32 mm shank for consistent chip control in demanding CNC machining. Left-hand cutting orientation Internal coolant for improved chip control Compatible with DNMG 1506 inserts Robust 32 mm shank, 300 mm overall length Reliable stability for precise internal bore finishing The AP312TM delivers a combination of stability and accessibility that benefits demanding turning applications. With a shank diameter of 32 mm and a total length of 300 mm, the toolholder is dimensioned to reduce deflection during overhang, which results in more consistent bore diameters and extended tool life. The slightly increased cutting height of 55 mm stabilises the insert seat and is advantageous when machining interrupted cuts or harder materials, enabling predictable performance even under varied cutting forces. Integrated coolant for improved chip evacuation and surface quality Equipped with internal coolant, the bar channels cutting fluid directly to the cutting zone; this measure enhances chip control and cooling, reducing edge wear and thermal distortion. For operations where surface finish and tool longevity matter, the internal coolant feature supports higher sustained cutting parameters by maintaining lower insert temperatures and aiding chip breakage. The result is fewer rework cycles and higher first-pass quality in serial production. Compatibility and cutting geometry that support predictable results Designed for DNMG 1506 indexable inserts and identified by the ISO designation A32T PDUNL, the bar features a cutting angle of 93°, optimised for left-hand turning strategies. This geometry balances shear and thrust forces to produce stable cut formation and reliable chip flow when paired with appropriate DNMG grades. The PDUN configuration facilitates quick insert changes and retains repeatability across tool swaps, which is essential for efficient workshop workflows and reduced set-up times. Practical benefits for workshop efficiency and process control Beyond the mechanical specifications, the AP312TM is intended to support efficient production processes: the left-hand orientation suits machines and set-ups that require opposite spindle directions, the 1.77 kg mass contributes to damping vibration without excessive load, and the compatibility with widely available DNMG inserts simplifies stocking. Where process reliability is a priority, this boring bar reduces variability and supports higher machine utilisation through straightforward insert maintenance and predictable performance. For machining tasks that demand dependable left-hand performance and effective coolant delivery, contact Metav Werkzeuge for tailored application advice and prompt supply from Emmerich. Technical data Article number: AP312TM ISO designation: A32T PDUNL Product name: PDUN for DNMG Indexable Inserts Facts Cutting direction: left Shank diameter: 32 mm Cutting height: 55 mm Overall length: 300 mm Weight: 1.77 kg Cutting angle: 93° Diameter: 40 mm ECLASS: 21180806 Special features Internal coolant: yes Compatible inserts: DNMG 1506 Manufacturer: Teknik Makina FAQ What insert type is recommended for this boring bar? The AP312TM is specified for DNMG 1506 indexable inserts, which are widely used for finishing and semi-finishing in turning operations. Is the coolant supplied through the bar? Yes, the bar features internal coolant, which delivers cutting fluid directly to the insert seat to aid chip control and cooling. What is the shank diameter and overall length? The tool has a 32 mm shank diameter and an overall length of 300 mm, designed to balance reach and rigidity. Can the AP312TM be used for heavy interrupted cuts? With a cutting height of 55 mm and the bar's robust construction, it is suitable for applications where interrupted cuts occur, provided inserts and cutting parameters are chosen accordingly. Which cutting direction does the bar support? This tool is manufactured for left-hand cutting orientation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, internal coolant and precise insert compatibility to maintain steady turning operations and longer tool life; order directly via Metav Werkzeuge or request application advice from our specialists. A32T PDUNR Boring bar — PDUN for DNMG indexable inserts, internal coolant The A32T PDUNR is a right-hand boring bar engineered for DNMG 1506 indexable inserts, combining rigid shaft dimensions and internal coolant for controlled chip evacuation in lathe turning tasks Right-hand boring bar for DNMG 1506 inserts Internal coolant for controlled chip evacuation 32 mm shaft diameter for stable clamping 300 mm overall length for extended reach Improved rigidity for consistent machining results The design focusses on structural stability to reduce deflection in medium-duty turning. With a 32 mm shaft and an outer diameter of 40 mm, the toolholder offers a solid clamping interface that helps preserve dimensional accuracy across runs. The nominal cutting height of 55 mm gives reliable seating for DNMG cutting edges, so operators benefit from repeatable surface quality and reduced setup variation. The measured mass of 1.77 kg contributes to damping of vibration without excessive inertia during tool changes. Effective thermal management and longer insert life Integrated internal coolant directs lubricant and coolant close to the cutting edge, lowering flank temperatures and improving chip control. This targeted cooling reduces edge wear and supports more consistent cutting forces, translating into longer insert life and fewer interruptions for tool changes. Combined with the 93° cutting angle, thermal load is better managed during continuous cuts, which makes the holder suitable for demanding cycle work where tool life and process stability are priorities. Clear compatibility and straightforward integration Compatibility is defined by the insert and ISO designations: the holder is made for DNMG 1506 indexable inserts and carries the ISO name A32T PDUNR. The right-hand cutting orientation is specified for conventional lathe toolpaths. The 300 mm overall length provides extended reach for deeper bores and offset tool positions while maintaining secure mounting. These explicit specifications support quick evaluation for fixture planning and ensure that insertion into existing turning setups is direct and verifiable. Practical benefits for workshop productivity By focusing on the core measures that affect machining — shaft rigidity, coolant delivery and insert compatibility — this boring bar reduces non-productive time and helps maintain part tolerances across batches. Fewer insert changes and improved surface finishes lower downstream rework and contribute to steadier production throughput. The combination of these technical attributes makes the tool a pragmatic choice where reliable turning performance and predictable maintenance intervals are required. Contact Metav Werkzeuge for an application assessment of the A32T PDUNR boring bar — specialists at Metav Werkzeuge can advise on insert selection, clamping recommendations and delivery from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: AP302TM Manufacturer: Teknik Makina Article designation: PDUN for DNMG Indexable Inserts ISO designation: A32T PDUNR Facts Shaft diameter: 32 mm Cutting height: 55 mm Overall length: 300 mm Diameter: 40 mm Weight: 1.77 kg Cutting angle: 93° Special features Compatible inserts: DNMG 1506 Cutting direction: right Internal coolant: yes SKU: AP302TM FAQ Which inserts are compatible with this boring bar? The A32T PDUNR boring bar is designed for DNMG 1506 indexable inserts and secures them at the specified cutting height for repeatable results. Does the holder provide internal coolant and what is the benefit? Yes — internal coolant is integrated on the A32T PDUNR boring bar; it improves chip evacuation, reduces thermal stress on the insert and extends tool life. What are the key dimensions to check for machine setup? Check the 32 mm shaft diameter, the 300 mm overall length and the 40 mm outer diameter listed for the A32T PDUNR to ensure correct clamping and reach. Is the cutting orientation specified? The tool is a right-hand holder; the A32T PDUNR is intended for conventional right-hand turning operations. What is the ISO designation and SKU for ordering? ISO designation A32T PDUNR and SKU AP302TM identify the boring bar for procurement and spare-part tracking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 32 mm shank and a 95° cutting angle for stable, chatter‑free turning, combined with internal coolant to extend insert life; order the tool directly via Metav Werkzeuge or request technical advice for an optimised setup. AP372TM Boring bar — PWLN for WNMG indexable inserts, left‑hand, internal coolant (Teknik Makina) AP372TM Boring bar for CNC turning applications, designed to accept WNMG 0804 indexable inserts for reliable finishing and semi‑roughing on conventional and CNC lathes Left‑hand cutting for reverse turning operations Internal coolant for improved chip evacuation Holds WNMG 0804 indexable inserts securely Performance and application: reliable turning with defined insert geometry The AP372TM is a purpose‑built boring bar intended for machining tasks that demand repeatable results with indexable tooling. Built around the PWLN for WNMG concept, this bar accepts the common WNMG 0804 insert format, enabling fast insert changes and predictable cutting behaviour. Left‑hand orientation suits reverse or left‑hand cutting operations, while the tool form is optimised for turning and facing on lathes and turning centres. The combination of a standard insert format and a familiar holder geometry simplifies tooling management across workshops and production lines. Rigidity and reach: why shaft and angle matter for process stability A solid 32 mm shank and a substantial 60 mm cutting height give the bar notable stiffness for its class; the 95° cutting angle increases edge engagement without sacrificing stability. These dimensions reduce deflection under cutting forces, which results in improved surface finish and reduced rework. With an overall length of 300 mm and a compact weight of 1.764 kg, the tool balances reach and mass to limit vibrations—an essential factor when machining longer workpieces or when extending beyond the chuck. Cooling and chip control: practical benefits of through‑tool coolant Integrated internal coolant supplies cutting fluid directly to the insert rake zone, improving temperature control at the cutting edge and aiding chip evacuation. This targeted cooling reduces thermal wear and helps preserve insert geometry, extending service life and lowering tooling costs over time. Using indexable inserts with correct grades for the workpiece material, the bar enables efficient chip flow and repeatable cycle times, particularly on materials where heat dissipation is critical. Compatibility and workshop handling: straightforward integration The tool carries the ISO designation A32T PWLNL and is matched to WNMG 0804 inserts, a widely available negative‑geometry type that offers a good balance between toughness and cutting performance. The clamping reference "08" aligns the holder with common clamping systems for seamless replacement. As a left‑hand, coolant‑fed boring bar, it fits standard turning holders and quick‑change systems, reducing setup time and simplifying tool inventory for production or repair shops. For precise left‑hand turning with improved insert life and dependable chip control, contact Metav Werkzeuge for tailored advice on integrating the AP372TM boring bar into the production process — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: AP372TM Manufacturer: Teknik Makina Designation: PWLN for WNMG indexable inserts ISO designation: A32T PWLNL Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Diameter: 40 mm Cutting angle: 95° Weight: 1.764 kg Special features Internal coolant: yes Compatible inserts: WNMG 0804 Cutting direction: left Clamping reference: 08 FAQ What insert type does this boring bar use? The AP372TM boring bar is designed for WNMG 0804 indexable inserts, providing easy interchangeability and predictable cutting behaviour. Is the tool suitable for left‑hand turning only? Yes, the holder is configured for left‑hand cutting, making it suitable for reverse turning operations and applications that require left‑hand tool orientation. How does the internal coolant benefit machining? Internal coolant supplied through the bar delivers fluid to the cutting zone, improving temperature control at the edge, aiding chip evacuation and extending insert life when using the AP372TM boring bar. What does the ISO designation A32T PWLNL indicate? The A32T PWLNL marking denotes the holder type and interface geometry, which helps ensure compatibility with standard tool posts and clamping systems used in turning centres. Will the 32 mm shank reduce vibration compared with smaller bars? A 32 mm shank increases stiffness compared with smaller diameters, improving resistance to deflection and reducing chatter in many turning scenarios when the AP372TM is used with suitable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise geometry and integrated coolant for consistent boring results; the left-hand cutting orientation and secure 32 mm shank ensure stable clamping and predictable chip flow. Order directly via Metav Werkzeuge or request technical advice from our specialists for application-specific recommendations Boring bar KA263TM (A32T SDUCL) — left-hand, internal coolant the Boring bar KA263TM is a left-hand cutting tool designed for SDUC indexable inserts and engineered for secure clamping in precision boring operations Left-hand cutting for reverse-direction operations Internal coolant for reliable chip evacuation Shank Ø32 mm for secure clamping Compatible with DC-- 11T3 indexable inserts Greater rigidity and predictable machining stability The combination of a 32 mm shank and a body diameter of Ø40 mm provides measurable stiffness that reduces vibration during interrupted cuts. Built to the A32T SDUCL ISO designation, this boring bar is balanced for rotational stability; the mass of approximately 1.924 kg contributes to consistent tool behaviour under load. These characteristics translate directly into improved surface finish and tighter bore tolerances, as the toolholder geometry controls chatter and runout without complex setup changes. Coolant-through design for improved tool life and chip control An internal coolant channel supplies cutting fluid directly to the cutting edge, promoting better lubrication and heat dissipation at the insert radius. For indexable insert systems such as DC-- 11T3, targeted coolant reduces built-up edge and extends insert life, while aiding chip evacuation in deep bores. Explaining briefly: indexable inserts are replaceable cutting tips that allow fast tool renewal; pairing them with coolant-through boring bars helps maintain cutting performance and reduces the frequency of tool changes. Optimised geometry for efficient material removal A nominal 93° cutting angle and a 45 mm cutting height deliver effective chip formation and clearance in common boring tasks. With an overall length of 300 mm, the tool is suited to medium-depth bores where reach and stiffness must be balanced. These dimensions result in efficient metal removal rates while maintaining control over cutting forces; fewer passes are often required to achieve the final bore diameter, improving throughput without compromising accuracy. Practical compatibility and workshop integration Designed for machining centres and lathes configured for left-hand operations, the bar accepts DC-- 11T3 inserts and requires standard clamping for a 32 mm shank. Supplied by Teknik Makina and distributed through Metav Werkzeuge, the component integrates into existing indexable-insert tooling systems with minimal adaptation. For production environments seeking reproducibility, the use of standard insert grades and coolant-through capability supports consistent cycle times and simplifies spare-part logistics Contact Metav Werkzeuge in Emmerich for application checks and to discuss specifying the Teknik Cutting Tools KA263TM with internal coolant — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KA263TM Manufacturer (raw data): Teknik Makina Product designation: Bohrstange / SDUC for DC-- indexable inserts ISO designation: A32T SDUCL Facts Diameter: 40 mm Shank diameter: 32 mm Cutting height: 45 mm Overall length: 300 mm Weight: 1.924 kg Cutting angle: 93° Cutting direction: left Special features Internal coolant Compatible with DC-- 11T3 indexable inserts Left-hand cutting orientation FAQ What insert type does this boring bar accept? The KA263TM is designed for DC-- 11T3 indexable inserts and seats them per the SDUC geometry Is the coolant supplied through the tool? Yes, the KA263TM features internal coolant, delivering fluid directly to the cutting edge for improved cooling and chip control Which shank and overall sizes are available for this model? This bar has a 32 mm shank and an overall length of 300 mm, with a body diameter of Ø40 mm What is the cutting orientation and where is it used? The tool uses a left-hand cutting direction, suitable for operations that require reverse cutting orientation on lathes or milling/boring heads How does the 93° cutting angle affect machining performance? The 93° cutting angle provides clearance and effective chip formation, supporting stable cuts and good surface finish in typical boring applications Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The left‑hand A32T SVUBL boring bar combines robust clamping with internal coolant and a 32 mm shank to deliver stable, high‑precision internal turning; order via Metav Werkzeuge or consult our advisors for application support. A32T SVUBL boring bar – left‑hand tool holder for VBMT 1604 inserts by Teknik Makina (internal coolant, 300 mm) The A32T SVUBL boring bar is a left‑hand tool holder engineered for internal turning with VBMT 1604 indexable inserts, providing a compact, coolant‑ready solution for precision workshop operations Left‑hand orientation for reverse cuts Internal coolant for improved chip evacuation Compatible with VBMT 1604 indexable inserts 32 mm shank, 300 mm overall length Stable machining from a compact, rigid design The A32T SVUBL is built around a 32 mm shank and a 300 mm overall length, a combination that reduces deflection during internal turning and maintains repeatable tolerances. The tool’s 93° cutting angle supports secure engagement of the insert, resulting in consistent cutting forces and reduced vibration. For workshops aiming to improve process reliability, this translates into fewer reworks and steadier surface finish. The moderate mass (approx. 1.909 kg) contributes to damping without unnecessary bulk, aiding stable feeds and consistent tool life. Active cooling and effective chip control to protect inserts Equipped with internal coolant, the holder channels cutting fluid directly to the cutting edge for enhanced cooling and flushing. This targeted coolant supply reduces thermal load on the insert and improves chip evacuation from the bore, which in turn lowers flank wear and helps preserve edge geometry. For operations where insert life and surface integrity matter, the coolant feature is a decisive benefit: insert life extends and maintenance intervals lengthen, supporting more cost‑efficient machining cycles. Fast changeover with standard indexable inserts Compatibility with VBMT 1604 indexable inserts makes the holder a practical choice for shops that prioritise quick set‑ups and predictable replacement cycles. The SVUB interface and secure clamping allow straightforward insert seating and repeatable positioning, cutting downtime during tool changes. Using commonly available inserts also simplifies stocking and ensures that matching grades for different materials or finishes are readily on hand, improving operational flexibility and total equipment availability. Left‑hand orientation and workshop fit‑up advantages Designed for a left‑hand cut direction, the tool accommodates operations that require reverse turning or specific lathe set‑ups. The 50 mm cutting height ensures the cutting edge sits at a stable reference plane for many standard toolpost arrangements. As a purpose‑built holder rather than a complete cutting system, it allows selection of insert grades and geometries to suit individual materials and feeds. Supplied by Teknik Makina and distributed through Metav Werkzeuge’s European quality filter, the component is intended to integrate smoothly into production and maintenance routines where consistent performance matters. For tailored advice on using the Teknik Makina A32T SVUBL boring bar in specific applications, or to place an order through Metav Werkzeuge, call +49 2822 7131930 or email info@metav-werkzeuge.com — our technical advisors will assist with selection and delivery information Technical Data SKU: KA288TM Manufacturer: Teknik Makina ISO designation: A32T SVUBL Type: SVUB for VBMT indexable inserts Article name: boring bar Numbers / Core technical data Shank diameter: 32 mm Overall length: 300 mm Cutting height: 50 mm Diameter: 40 Weight: 1.909 kg Cutting angle: 93° Special features / Versions Left‑hand cutting direction Internal coolant Compatible with VBMT 1604 indexable inserts SVUB interface FAQ Which indexable inserts fit this holder? The holder accepts VBMT 1604 indexable inserts; the A32T SVUBL is specified for that plate size and repeatable seating. Is coolant supplied through the tool body? Yes — the boring bar features internal coolant to deliver fluid directly to the cutting zone for improved cooling and chip control. What are the key dimensions to check for machine fit‑up? Important dimensions are the 32 mm shank, 300 mm overall length, 50 mm cutting height and bore diameter 40; these determine compatibility with toolposts and boring heads. Can the holder be used for reverse or left‑hand operations? The A32T SVUBL is a left‑hand orientation tool, designed specifically for reverse cutting directions and relevant lathe set‑ups. How does this holder support production efficiency? By combining a rigid 32 mm shank, targeted coolant and standard VBMT 1604 insert compatibility, the A32T SVUBL reduces downtime for tool changes and helps extend insert life, contributing to steadier production cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of internal coolant and precise VBMT 1604 compatibility for reliable boring performance; the 300 mm overall length and Ø40 shank provide stability in long-reach operations and reduced vibration. Order the boring bar directly via Metav Werkzeuge or request technical advice from the consultants. Boring bar KA209TM — SVUB for VBMT indexable inserts, right-hand, internal coolant A Boring bar KA209TM engineered as an SVUB holder for VBMT indexable inserts, designed for right-hand cutting with internal coolant and a 300 mm overall length suitable for medium to long-reach turning operations SVUB holder for VBMT 1604 inserts Internal coolant supply for chip evacuation Right-hand cutting with 93° cutting angle 300 mm overall length with Ø40 shank Built for repeatable, high-stability boring results The SVUB-style boring bar is configured to accept VBMT 1604 indexable inserts, delivering repeatable cutting geometry that simplifies insert indexing and reduces setup time. The A32T SVUBR ISO designation defines the connection and clamping geometry, enabling compatibility with common toolholder systems. With a Ø40 external diameter and a 32 mm shank, the assembly improves stiffness in extended setups, translating into consistent bore tolerances and longer tool life through reduced chatter and deflection. Improved coolant routing and chip control for efficient machining Internal coolant is provided directly to the insert seat, which promotes effective chip evacuation and improves surface finish when machining steels and alloyed materials under interrupted cuts. The tool’s 93° cutting angle and right-hand orientation combine to offer predictable cutting forces and stable feed behaviour, particularly in bore finishing and semi-finishing passes. This configuration helps maintain cycle-time reliability and supports higher metal removal rates where stable coolant supply is essential. Practical design for rapid integration into workshop setups Attention to handling and integration reduces downtime during tool changes: the bar’s geometry and clamping specifications support standard SVUB toolholders and a VBMT 1604 insert format, so insert inventories remain compact. The measured mass of 1.909 kg and a 300 mm overall length balance rigidity with manoeuvrability on turret or tool post fixtures. The bright specification of the holder means fewer adapter parts are required, enabling faster changeovers and more consistent tool offsets in production applications. Contact Metav Werkzeuge to arrange a technical consultation or to procure the Teknik Cutting Tools KA209TM SVUB boring bar with internal coolant directly from Emmerich for immediate workshop integration Technical data Article number: KA209TM Manufacturer: Teknik Makina eCl@ss: 21180806 ISO designation: A32T SVUBR Product type: SVUB for VBMT indexable inserts Core dimensions Diameter: Ø40 mm Shaft diameter: 32 mm Cutting height: 50 mm Overall length: 300 mm Weight: 1.909 kg Cutting angle: 93° Cutting direction: right Design & special features Compatible with VBMT 1604 inserts Internal coolant supply SVUB insert seat Clamping holder size: 16 FAQ Which inserts fit this boring bar? The boring bar KA209TM is designed for VBMT 1604 indexable inserts in an SVUB seat, allowing standard carbide grades and geometries to be used for varied turning tasks. Does the tool provide internal coolant? Yes — the Teknik Makina KA209TM features internal coolant directed to the insert pocket to aid chip evacuation and improve surface quality in through-tool coolant setups. What are the main dimensions and weight of the tool? Dimensions: Ø40 mm external diameter, 32 mm shank diameter, 50 mm cutting height, 300 mm overall length; mass approximately 1.909 kg for stable long-reach performance. Is this boring bar suitable for right-hand cutting only? The design specifies right-hand cutting with a 93° cutting angle, optimised for conventional turning directions and standard toolpost arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High rigidity and internal coolant combine to lower cutting temperatures and extend insert life, while compatibility with VCMT 1604 inserts ensures versatile use across turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar KA306TM — SVUC for VCMT indexable inserts, internal coolant (Teknik Makina) A boring bar designed for left‑hand turning applications with through‑tool coolant and compatibility with VCMT 1604 indexable inserts. Internal coolant feed for optimised chip evacuation Compatible with VCMT 1604 inserts 32 mm shank for rigid clamping 300 mm overall length for extended reach Precision where stability matters The KA306TM delivers stable cutting through a robust 32 mm shank and a substantial 40 mm tool body, which together reduce vibration and improve surface finish during deep or off‑centre turning. The A32T SVUCL ISO form ensures predictable seating and repeatability in the clamping system; this rigidity translates directly into longer tool life and fewer interrupted cycles on production runs. Coolant supply that protects inserts and workpieces Equipped with internal coolant, the tool routes cutting fluid close to the cutting edge to control temperature and assist chip evacuation. That targeted cooling reduces thermal wear on the VCMT 1604 inserts and helps to maintain consistent tool geometry over longer periods. For manufacturers seeking improved process reliability, this feature supports higher cutting parameters and more stable machining without complex external arrangements. Designed for insert versatility and serviceability The holder accepts VCMT 1604 indexable inserts and uses a compact clamping geometry compatible with a designation 16 clamping holder, simplifying changeover and stock keeping. The 93° approach angle suits a range of finishing and semi‑roughing passes, offering a balance between cutting force distribution and edge engagement. Maintenance is straightforward thanks to the standardised insert interface and accessible clamping screw arrangement. Application suitability and setup notes Weighing 1.812 kg and with a 300 mm overall length, the tool is intended for installations where reach and rigidity must be balanced. The left‑hand cutting direction should be matched to machine spindle and workpiece orientation during setup. When paired with appropriate VCMT inserts and a correctly torqued clamping system, the assembly is well suited to general turning tasks across a variety of steels and cast materials where indexable‑insert tooling is preferred. For demanding left‑hand turning applications requiring internal coolant and VCMT versatility, contact Metav Werkzeuge to discuss KA306TM application details or request a tailored quotation — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KA306TM Manufacturer: Teknik Makina ISO designation: A32T SVUCL Type: SVUC for VCMT indexable inserts Core measurements Overall length: 300 mm Diameter: 40 mm Shank diameter: 32 mm Cutting height: 50 mm Weight: 1.812 kg Cutting angle: 93° Cutting direction: left Clamping holder designation: 16 Special features Internal coolant: yes Suitable for VCMT 1604 inserts Left‑hand turning orientation Indexable insert toolholder design FAQ Which inserts fit this tool? The KA306TM accepts VCMT 1604 indexable inserts; the SVUC geometry is matched to that insert form for consistent seating and clamping. Is coolant delivered through the tool? Yes — the boring bar features internal coolant supply to the cutting zone, which helps control temperature and improve insert life. What clamping and shank sizes are specified? The tool has a 32 mm shank for rigid clamping and a clamping holder designation of 16 for compatible toolholders. Is the KA306TM suitable for heavy roughing? With its robust body and 300 mm overall length, the tool suits many semi‑roughing and finishing tasks when paired with appropriate inserts and cutting parameters, though reach and machine rigidity should be considered. Does the tool require a specific turning direction? The KA306TM is set up for left‑hand cutting; ensure machine setup and workpiece orientation match this direction. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigidity, internal coolant and precise compatibility with VCMT 1604 inserts for reliable turning operations; order the Boring Bar SVUC for VCMT Indexable Inserts directly via (Metav Werkzeuge) or ask our consultants if needed. Boring Bar SVUC for VCMT Indexable Inserts — A32T SVUCR, 40 mm diameter, internal coolant (Teknik Cutting Tools) Boring Bar SVUC for VCMT Indexable Inserts – a right-hand turning bar designed for secure insert clamping and coolant-fed chip control in industrial turning applications Right-hand cutting for finish turning Internal coolant for effective chip evacuation ISO A32T SVUCR shank for high stability Compatible with VCMT 1604 indexable inserts Higher metal-removal reliability thanks to robust geometry The A32T SVUCR shank form and a 40 mm diameter provide a rigid foundation that reduces vibration during machining. This mechanical stability directly benefits surface finish and tool life by lowering tool deflection under load. For turning processes where consistency matters, the solid construction and a 32 mm shank diameter support repeatable results on medium-duty to heavy-duty setups. The measured weight of 1.812 kg signals a substantial tool body that contributes to steadier cutting dynamics and improved dimensional accuracy across production runs. Insert compatibility and secure cutting for predictable results Engineered for VCMT 1604 indexable inserts, the bar accepts standard carbide cutting tips with a cutting height of 50 mm, ensuring correct seating and reliable chip formation. The assembly follows the SVUC clamping concept, which secures inserts with positive seating to prevent micro-movement during interrupted cuts. The geometry, combined with a 93° cutting angle, supports effective radial engagement and helps maintain consistent cutting forces. This targeted design reduces rework and supports predictable cycle times in batch production. Operational advantages: coolant-fed performance and streamlined setup Internal coolant routing is integrated to the tool body, supplying cooling and lubrication directly to the cutting edge for improved chip breakage and tool life. The internal coolant capability assists in evacuating chips from the cutting zone and helps to stabilise cutting temperatures, especially during longer passes. The bar’s 300 mm overall length and right-hand cutting direction are tuned for many turret and toolpost arrangements, while the ISO designation simplifies inventory and replacement planning. For workshops seeking a straightforward upgrade path, the bar reduces setup complexity and supports quicker changeovers. For targeted advice on integrating the Teknik Cutting Tools boring bar into an existing toolset, contact Metav Werkzeuge for a customised recommendation and ordering support from Emmerich. Technical Data Article number: KA214TM Designation: SVUC for VCMT Indexable Inserts ISO designation: A32T SVUCR Manufacturer: Teknik Makina Facts Diameter: 40 mm Shank diameter: 32 mm Overall length: 300 mm Cutting height: 50 mm Weight: 1.812 kg Cutting angle: 93° Direction: right-hand Special features Internal coolant: yes Compatible inserts: VCMT 1604 Clamping holder designation: 16 Storytrigger: bohrstange FAQ What inserts fit this boring bar? The Boring Bar SVUC for VCMT Indexable Inserts is specified for VCMT 1604 inserts and is designed to secure them with the SVUC clamping geometry. Is the tool suitable for heavy-duty turning operations? With a 40 mm diameter, A32T SVUCR shank form and a weight of 1.812 kg, the bar offers increased rigidity suited to medium and some heavy-duty turning tasks. Does the bar provide coolant supply to the cutting edge? Yes, internal coolant is integrated into the tool body to support chip evacuation and temperature control at the cutting zone. What is the overall length and cutting direction of the bar? The tool has an overall length of 300 mm and is designed for right-hand cutting. Which ISO designation helps with tool inventory planning? The bar carries the A32T SVUCR ISO designation, facilitating identification and replacement in standardised tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 90° cutting geometry, broad compatibility with Sandvik R390-11T3 indexable inserts and a compact 16 mm shank for reliable workshop integration; order the Corner Turning Head directly via Metav Werkzeuge or ask our consultants if needed Corner Turning Head — 90° turning head for R390-11T3 indexable inserts (Teknik Makina) The Corner Turning Head is a 90° external turning head designed for shoulder and corner machining with R390-11T3 indexable inserts, suitable for toolposts with a 16 mm shank diameter 90° cutting angle for precise shoulder turning Compatible with Sandvik R390-11T3 inserts 16 mm shank diameter for standard toolholders Torx M2.5×7 screw with T8 key for secure clamping Accurate corners and predictable results for production turning The compact turning head delivers a defined 90° cutting geometry, which makes shoulder and corner machining repeatable and reliable in series production. By using a head designed for the R390-11T3 insert form, the system ensures consistent chip flow and contact conditions; this simplifies process planning and reduces set-up variation. The combination of a standardised shank diameter and a short overall length supports stable clamping in modern tool posts, lowering vibration and improving surface finish for turned components. Secure clamping and fast insert replacement to reduce downtime Clamping is managed via a Torx M2.5×7 screw operated with a T8 key, providing firm retention of the indexable insert and straightforward replacement. Quick access to the clamping screw means insert changes are carried out with minimal interruption, which increases machine uptime and productivity. The head is specified with five cutting edges and a compact mass (approx. 0.225 kg), resulting in balanced handling during set-up and steady performance in short-to-medium batch work. Designed for workshop compatibility and easy integration With a 16 mm shank diameter and a head diameter of 40 mm combined with an overall length of 40 mm, the unit fits many standard holders without adjustment. The geometry is intended to match typical turning sequences used in maintenance and small-batch manufacturing, enabling retrofit into existing tool packs. Where toolholder and insert standardisation matters, the compatibility with Sandvik insert dimensions reduces the need for multiple insert types, simplifying stock and reordering routines. Practical advantages that support everyday metalworking The turning head’s compact dimensions and defined contact geometry help maintain stable cut conditions on interrupted cuts and shoulder faces. For operations where repeatability is essential, the head’s construction supports reproducible seat and clamping conditions, translating into consistent tolerances and fewer rejected parts. The product is appropriate for machining tasks in industrial workshops and precision maintenance where robust, standard-compatible tooling drives operational efficiency. For reliable corner turning with proven Sandvik R390-11T3 compatibility, request procurement advice or place an order through Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and availability Technical Data Article number: T577TM Manufacturer: Teknik Makina Brand: Teknik Makina Compatible inserts: R390-11T3 (Sandvik) Torx screw: M2.5×7 Torx key: T8 Core technical figures Shank diameter (aufnahme): 16 mm Head diameter (durchmesser): 40 mm Overall length (gesamtlänge): 40 mm Cutting angle (schnittwinkel): 90° Number of cutting edges (schneiden): 5 Weight: 0.225 kg Special features Designed for R390-11T3 indexable inserts Secure Torx clamping system Compact construction for standard toolholders Suitable for shoulder and corner turning SKU: T577TM FAQ Which insert type fits this turning head? The head is designed for R390-11T3 indexable inserts and matches Sandvik insert geometry for reliable seating and repeatable cutting conditions. What shank size is required for mounting? Mounting requires a toolholder that accepts a 16 mm shank; the head’s compact length and diameter support common toolpost arrangements. How is the insert secured and which key is needed? Insert retention is achieved with a Torx M2.5×7 screw; a T8 Torx key is specified for tightening and loosening. Is the head suited for heavy-duty roughing? The compact geometry and defined 90° cutting angle are optimised for shoulder finishing and general turning; for heavy roughing, assess machine power and insert grade before use with this head. What are the physical dimensions and weight? The turning head has a 40 mm head diameter, 40 mm overall length and weighs approximately 0.225 kg, supporting balanced handling and stable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from high rigidity and precise insert compatibility to keep machining stable and repeatable. The robust 40 mm body and ISO S32U shank deliver improved vibration damping and consistent bore quality. Order the boring bar directly via Metav Werkzeuge or contact our consultants for application advice. Boring bar S32U – 40 mm for CNMG 1204 indexable inserts (Teknik Makina) Boring bar S32U designed for right-hand turning with CNMG 1204 indexable inserts, ideal for stable internal and external boring in industrial workshops. Solid 40 mm diameter body Compatible with CNMG 1204 inserts Right-hand cutting, 95° cutting angle Shank Ø32 mm, L 350 mm Stable, vibration‑resistant machining for consistent bores The 40 mm diameter body paired with the ISO S32U shank increases torsional stiffness and reduces chatter during interrupted cuts. This rigidity translates into repeatable bore diameters and longer insert life, which lowers tooling costs per part and improves first-pass yield. The design focuses on mechanical stability rather than compensating for vibrations through downstream rework, supporting efficient batch production and tight tolerance control. Minimised setup and faster tool changes with standard inserts Compatibility with CNMG 1204 indexable inserts allows rapid re-grading between roughing and finishing grades without changing the holder. Using widely available inserts reduces inventory complexity and shortens downtime during tool replacement. The clamping arrangement is engineered to secure the insert reliably, contributing to consistent cutting geometry and predictable process parameters. Geometry tuned for access and controlled chip flow A 95° cutting angle and right-hand cutting orientation provide favourable cutting forces and improved tool clearance in common boring applications. The angle supports efficient chip formation and evacuation in through-hole and shoulder boring, reducing the risk of recutting chips and surface blemishes. The result is a smoother bore wall and less need for secondary finishing. Secure clamping and maintenance-friendly fasteners The clamping head benefits from a 22 mm width that balances insert support and accessibility. Fastening uses an M6x27 clamp screw paired with an Allen key (3) for straightforward tightening and repeatable torque setting during maintenance. This straightforward fastener layout simplifies routine checks and reduces time spent on service tasks at the machine. Optimised dimensions for standard toolposts and machines A shank diameter of Ø32 mm and overall length of 350 mm make the tooling suitable for many conventional lathes and CNC turning centres while preserving stiffness at reach. The reasonable mass (2.125 kg) ensures stable dynamics without excessive loading of the turret, aiding balance and predictable axis behaviour during plunge or deep internal boring cycles. Production advantages across workshop applications The combination of a stiff tool body, standard insert use and simple clamping design delivers tangible production benefits: improved surface finish, longer insert life, and reduced changeover time. The boring bar is suited to serial production where process stability and tool repeatability directly affect throughput and quality metrics, making it a pragmatic choice for precision-oriented metalworking environments. Choose Teknik Makina's S32U boring bar for reliable boring operations and contact Metav Werkzeuge for tailored application advice and prompt supply from Emmerich. Technical data SKU: K402-1TM Label: 40mm Bohrstange CNMG 1204 L350mm Manufacturer: Teknik Makina EClass: 21180806 Facts Diameter: 40 mm Overall length: 350 mm Shank diameter: 32 mm Cutting height: 60 mm Clamping head width: 22 mm Weight: 2.125 kg Cutting angle: 95° Direction: right-hand Allen key: 3 Clamp screw: M6x27 ISO designation: S32U Special features For CNMG 1204 indexable inserts Product type: Boring bar Right-hand cut Clamping head width 22 mm Allen key: 3 Clamp screw: M6x27 FAQ Which inserts fit this boring bar? The boring bar S32U is compatible with CNMG 1204 indexable inserts and accepts standard grades for roughing and finishing. Is the tool suitable for deep boring applications? With a 40 mm body and Ø32 mm shank, the bar provides increased stiffness for extended reach operations while maintaining stable cutting behaviour. What fasteners are supplied with the tool? Clamping uses an M6x27 screw and an Allen key (3) is specified for tightening and maintenance tasks on the clamping head. Can the bar be mounted in common turning turrets? The Ø32 mm shank and 350 mm length are compatible with many standard turret toolposts and CNC turning systems that accept round shanks. What benefits does the 95° cutting angle provide? The 95° geometry improves tool clearance and chip control in shoulder and internal boring, contributing to better surface quality and reduced recutting of chips. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid S40T design and a 40 mm shank for stable, repeatable boring operations; the 300 mm overall length and 45 mm cutting height ensure compatibility with standard toolholders. Order the tool directly through Metav Werkzeuge or consult our specialists for application advice. Drill bar S40T (40 mm) for DC-- 11T3 indexable inserts — Teknik Makina The Drill bar S40T is a robust boring bar designed for heavy-duty machining with DC-- 11T3 indexable inserts, offering a 40 mm shank and a 300 mm overall length for industrial turning and boring applications. 40 mm shank for increased rigidity Compatible with DC-- 11T3 indexable inserts Overall length 300 mm for deep reach Stable machining through optimised geometry The bar is engineered with an S40T designation and a substantial shank diameter of 40 mm, which increases torsional stiffness and reduces vibration during cuts. This geometry leads to improved surface finish and longer insert life when compared with smaller shanks. In production environments where cycle time and repeatability matter, the combination of mass and form stability translates into fewer rejects and less rework, supporting lean manufacturing principles. Precise insert interface for reliable cutting Compatibility with DC-- 11T3 indexable inserts ensures a standardised and secure tool-to-insert connection. The specified cutting height of 45 mm and a clamp head width of 27 mm are matched to the insert geometry so that seating is exact and runout is minimised. The cutter assembly is secured using a Torx T15 key and M3.5x8.5 Torx screw, enabling consistent clamping torque and quick insert changes that reduce downtime. Practical handling and installation benefits With a right-hand cut and a cutting angle of 93°, the bar is suited to conventional turning set-ups and offers reliable chip evacuation in through-tool and overhang conditions. The overall length of 300 mm gives access to deeper bores while maintaining a conservative overhang-to-diameter ratio for stability. Handling is simplified by clear ISO designation and the compact interface, which allows the tool to be mounted and removed efficiently during production changeovers. Reliability and operational impact in the workshop Specified weight (approx. 1.914 kg) and the ISO-marked construction help planning for toolholders and machine capacity. The design supports sustained production runs: reduced vibration produces longer insert life, and the standardised interface reduces inventory complexity. For procurement, the SKU K135TM identifies the exact configuration and supports traceability across maintenance and reordering processes. For robust, high-precision boring with Teknik Makina tooling, contact Metav Werkzeuge to source the S40T drill bar (SKU K135TM) and receive expert application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K135TM Product type: Boring bar ISO designation: S40T Facts Diameter: 40 mm Overall length: 300 mm Shank diameter: 40 mm Weight: 1.914 kg Cutting height: 45 mm Clamp head width: 27 mm Cutting angle: 93° Special features For DC-- 11T3 indexable inserts Right-hand cut Torx key: T15 Torx screw: M3.5x8.5 Manufacturer: Teknik Makina FAQ What insert type is required for this boring bar? This boring bar is designed for DC-- 11T3 indexable inserts, providing a standardised fit and reliable seating for repeatable results. What is the overall length and shank size of the tool? The tool has an overall length of 300 mm and a shank diameter of 40 mm; it is identified as S40T (SKU K135TM) by Teknik Makina. Which direction of cut does the bar support? The bar is configured for a right-hand cut, with a cutting angle of 93° for conventional machining set-ups. How is the insert secured to the clamp head? Inserts are fastened using a Torx T15 key and M3.5x8.5 Torx screw, ensuring consistent clamping and straightforward insert changes. Is this tool suitable for deep boring operations? With a 300 mm overall length and a robust 40 mm shank, the bar is suitable for deeper reach tasks while maintaining good stability when correctly supported. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com