Gibt es einen Hahn und Kolb Online Shop?

The compact design combines 40 mm cutting diameter and internal coolant to deliver stable, repeatable machining with Sandvik R390 17 indexable inserts; its short 45 mm overall length helps maintain rigid setups. Order the tool directly via Metav Werkzeuge or consult the technical team for integration advice. Corner milling head for R390 17 indexable inserts — 40 mm, internal coolant (Teknik Makina) The corner milling head for R390 17 indexable inserts is a compact cutting head built for precision external machining where small‑diameter tooling and through‑tool coolant are required. 40 mm cutting diameter Internal coolant supply Compatible with Sandvik R390 17 inserts Compact 45 mm overall length Stable machining with small‑diameter tooling and defined geometry The head offers a 40 mm diameter and a 90° cutting angle, delivering a reliable geometry for square shoulder cuts and light face‑turning operations. With 4 cutting edges, the tool distributes cutting forces across multiple inserts, reducing vibration and improving surface finish. The short overall length contributes to increased stiffness at the tool tip, which in practice means fewer reworks and higher process stability in repetitive production runs. Internal coolant for cooler cutting and longer tool life Integrated internal coolant directs cutting fluid close to the cutting zone, improving chip control and reducing thermal load on the inserts. This results in more consistent cutting conditions and extended insert life when using Sandvik R390 17 indexable inserts. For workshops seeking predictable performance, the coolant feature reduces the risk of built‑up edge and supports higher metal‑removal rates without compromising surface quality. Practical assembly and serviceability to reduce downtime Assembly uses Torx fastening with a Torx T15 key and supplied screw dimension M3.5x8.5, enabling quick insert changes and straightforward maintenance. The tool is held on a 16 mm connection (aufnahme 16 mm), keeping compatibility with compact holders and modular systems. The lightweight construction (approx. 0.276 kg) and compact 45 mm length allow rapid tool changes and reduced spindle load, helping to maintain production flow on medium‑duty lathes and milling centres. Contact Metav Werkzeuge to confirm machine compatibility and secure the T402-1TM corner milling head with internal coolant, supplied directly from Emmerich — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: T402-1TM Product: Corner milling head for R390 17 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 40 mm Overall length: 45 mm Shank / connection diameter: 16 mm Weight: 0.276 kg Cutting edges: 4 Cutting angle: 90° Torx key: T15 Special features Internal coolant Compatible inserts: R390 17 Compatible insert manufacturer: Sandvik Torx screw: M3.5x8.5 ECLASS: 21181015 FAQ Which indexable inserts fit this head? The corner milling head accepts R390 17 indexable inserts; compatibility has been verified for Sandvik inserts and the design suits positive geometry variants. Is coolant delivered through the tool body? Yes, the head features internal coolant to direct fluid to the cutting zone for improved chip evacuation and tool life. What fastening hardware is required for insert changes? Insert clamping uses a Torx T15 key and screws sized M3.5x8.5, which enable quick and secure insert replacement. What is the SKU and who manufactures the tool? The tool is listed as T402-1TM and is manufactured by Teknik Makina; Metav Werkzeuge supplies the item for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable internal coolant delivery, compact 40 mm form factor and secure Torx fastening to maintain consistent turning performance with minimal setup time — order the tool directly via Metav Werkzeuge or consult the technical team for application advice. Corner tool head T174TM — 40 mm, internal coolant Corner tool head T174TM designed for light to medium turning operations using indexable inserts, ideal for compact toolholders and finishing passes Internal coolant feed Compatible with TPKT 1003 inserts 40 mm diameter for compact set-ups Secure fastening with Torx T15 key Optimised coolant path for stable cutting The compact head integrates an internal coolant channel that directs coolant close to the cutting edge, improving tool-life and chip control in interrupted or continuous turning. By feeding coolant directly to the insert seat, thermal loading on the cutting geometry is reduced and flank wear is delayed, which translates into longer intervals between insert changes and fewer unexpected interruptions. The combination of internal coolant and a compact body supports consistent surface finishes even under varying cutting conditions. Reliable indexing and secure clamping for repeatable results With a design tailored for TPKT 1003 indexable inserts, the head provides a stable mounting platform that keeps the insert seat rigid during cuts. The 100° cutting angle offers a balanced approach between cutting edge strength and accessibility for shoulder or face turning tasks. Fastening is achieved with a Torx T15 drive, ensuring repeatable torque and minimal loosening during operation. These features together reduce setup variability and contribute to predictable cycle times on CNC lathes and turning centres. Compact design that fits modern machining workflows The 40 mm diameter and total length of 40 mm make this head suitable where space is limited or multiple stations must be arranged closely on a turret. The lightweight construction (0.265 kg) minimises added overhang mass, aiding dynamic stability and allowing higher acceleration on indexed cycles. The head is compatible with ISCAR-manufactured inserts and is appropriate for finishing and light roughing where a secure seat and effective coolant supply are priority criteria. Practical benefits for purchasing and operations Specifying this head supports tool standardisation by using a common insert family and a simple Torx fastening system, which reduces inventory complexity and training overhead. The head’s features address operational concerns: controlled lubrication, dependable clamping and a compact envelope for dense turret layouts. For applications that require clarity on insert grades or cutting data, Metav’s team provides supplemental technical guidance and can advise on suitable insert geometries. For turning applications that demand compact tooling with dedicated coolant delivery, request the Teknik Makina Corner tool head T174TM via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical consultation and availability. Technical data SKU: T174TM Label: 40mm Eckmesserkopf TPKT 1003 L40mm mit Innenkühlung ECLASS: 21181015 Facts Diameter: 40 mm Total length: 40 mm Weight: 0.265 kg Cutting angle: 100° Number of cutting edges: 5 Special features Internal coolant For TPKT 1003 indexable inserts Compatible with ISCAR inserts Torx T15 fastening FAQ Is this head compatible with standard TPKT 1003 inserts? Yes. The head is designed specifically for TPKT 1003 indexable inserts and provides a secure seat for repeatable positioning. Does the tool support internal cooling and how does it help? Internal coolant is integrated into the head to direct fluid close to the cutting edge, improving chip control and thermal management during turning. What drive is required for insert clamping? Clamping is performed with a Torx T15 drive to ensure consistent torque and secure fastening of the insert pocket. Can this head be used on compact turrets or small toolholders? The compact 40 mm diameter and short overall length make it suitable for dense turret arrangements and restricted tool envelopes. Which manufacturer produced this head and what is the SKU? The head is supplied by Teknik Makina and sold under SKU T174TM for straightforward ordering and identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient corner turning and reliable chip control result from the combination of a compact 40 mm diameter, internal coolant and a design for WNMU 0706 indexable inserts; these features support consistent geometry and reduced rework. Order the T314TM via Metav Werkzeuge for dependable delivery and ask our consultants for application-specific recommendations. Eckmesserkopf T314TM — 40 mm corner turning head with internal coolant (Teknik Makina) The Eckmesserkopf is a compact corner turning head designed for use with WNMU 0706 indexable inserts, ideal for confined turning operations and precise profile work 40 mm diameter for compact tool setups Integrated internal coolant for chip control Compatible with WNMU 0706 indexable inserts Torx T20 screw M5x12 for secure fastening Consistent accuracy in tight toolpaths The compact configuration and standard interface ensure repeatable results when machining close to shoulders or in restricted bores. With a 40 mm diameter and a 40 mm overall length the head is optimised for minimal overhang, which reduces deflection and enhances dimensional stability. Compatibility with WNMU 0706 indexable inserts and the presence of 4 cutting edges together with a 90° cutting angle make the component suitable for precise corner turning and profile generation, lowering the need for subsequent finishing passes. Improved tool life and chip evacuation through coolant routing An integrated internal coolant feed directs lubricant precisely to the cutting zone, improving chip evacuation and heat control during continuous turning operations. This targeted cooling helps extend insert life and maintain consistent cutting performance across production runs. The secure fastening system uses a Torx T20 drive and M5x12 screw to provide robust clamping, reducing micro-movement under load and contributing to steady surface finishes and fewer rejected parts. Quick integration and simplified maintenance for workshop flow Fitting into standardised toolholders with a 16 mm interface, the head allows quick replacement and straightforward inventory management. Support for standard indexable inserts simplifies regrinding and stocking decisions, while the clear SKU T314TM identifies the exact configuration for procurement and spare-part planning. Combined with Metav Werkzeuge’s supply chain proximity and technical advice, downtime is kept low and the head integrates seamlessly into regular maintenance cycles. Request tailored tooling advice from Metav Werkzeuge to specify the Teknik Makina T314TM corner turning head with internal coolant for the intended holder and process; contact +49 2822 7131930 or email info@metav-werkzeuge.com for precise assistance Technical data Article number: T314TM Product type: Eckmesserkopf Manufacturer: Teknik Makina Suitable for: WNMU 0706 indexable inserts Compatible insert maker: Sumitomo eClass: 21181015 Facts Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Cutting edges: 4 Cutting angle: 90° Special features Internal coolant Torx key: T20 Torx screw: M5x12 SKU: T314TM Category path: Zerspanen > Eckmesserkopf FAQ Is this head compatible with WNMU 0706 inserts? Yes. The Eckmesserkopf is designed specifically for WNMU 0706 indexable inserts and works with the corresponding insert geometry. Does the T314TM provide internal coolant? Yes. The T314TM features internal coolant to improve chip evacuation and temperature control at the cutting edge. Which fastening hardware is required for secure mounting? The head uses a Torx T20 drive with an M5x12 screw for reliable clamping. How many effective cutting edges does the head support? The head is configured for 4 cutting edges, enabling efficient indexing and multiple cutting positions. What are the key dimensions to check for holder compatibility? Key dimensions are 40 mm diameter, 40 mm overall length and a 16 mm shank interface for straightforward holder matching. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 40 mm diameter, integrated internal coolant and secure Torx clamping to achieve consistent 90° shoulders with minimal downtime; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head — 40 mm with internal coolant (Teknik Makina) Corner tool head for XNKT 0805 indexable inserts, designed for precise shoulder turning and profiling in compact CNC setups 40 mm diameter tool head with 90° cutting angle Internal coolant channel for active cooling Compatible with XNKT 0805 inserts (Korloy) Robust M4x10 Torx clamping with T15 key Deliver repeatable 90° shoulders in confined spaces The compact design of this turning head combines a 40 mm diameter with an overall length of 45 mm, enabling tight-tooling arrangements without sacrificing rigidity. The geometry guarantees a defined 90° cutting angle, which supports consistent shoulder faces and precise corner radii on machined parts. By using a head tailored to XNKT inserts, set-up time is reduced and process stability is improved, making the component suitable for small-batch production and finishing passes where dimensional accuracy is required. Integrated cooling for stable cutting conditions and longer tool life A built-in internal coolant channel directs fluid close to the insert seat and cutting edge, improving chip evacuation and reducing thermal load during interrupted cuts. This targeted supply helps maintain cutting temperatures and surface finish, which in turn extends insert life and reduces regrinding or replacement frequency. For operations that require uninterrupted surface quality over series runs, the coolant integration provides a practical way to optimise both tool performance and component consistency. Secure clamping and quick indexing to reduce downtime Clamping is performed with a M4x10 screw secured using a T15 Torx key, offering a robust interface that minimises micro-movement under load. The system accepts XNKT 0805 indexable inserts with four usable edges, allowing rapid rotation to a fresh cutting edge without realignment. This approach lowers tooling costs per produced part and shortens maintenance intervals, delivering clear productivity gains for workshops focused on throughput and repeatability. Designed for versatile corner turning and finishing with Korloy inserts Matched to Korloy XNKT 0805 indexable inserts, the head is intended for corner and shoulder turning, profiling and light finishing operations where a defined angle and good surface finish are priorities. The straightforward mechanical design simplifies insert changes and tool maintenance, supporting lean workflows in mechanical workshops and subcontracting environments. For specialised requirements or confirmation of compatibility with a particular insert grade, technical consultation is available. Contact Metav Werkzeuge today to discuss how the Teknik Makina corner tool head (SKU T900-1TM) can be integrated into current turning operations; phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and rapid supply Technical data Article number: T900-1TM Manufacturer: Teknik Makina Product type: Corner tool head (Eckmesserkopf) Facts Diameter: 40 mm Overall length: 45 mm Weight: 0.296 kg Cutting angle: 90° Number of cutting edges: 4 Screw: M4x10 Torx key: T15 Special features Internal coolant channel Designed for XNKT 0805 indexable inserts Compatible insert manufacturer: Korloy SKU: T900-1TM eClass: 21181015 FAQ What insert type does the tool accept? The head is designed for XNKT 0805 indexable inserts and is compatible with Korloy insert variants. Is the coolant supplied to the cutting edge? Yes — the integrated internal coolant channel directs fluid to the insert seat to aid chip evacuation and cooling. How is the insert clamped and what tool is required? Clamping uses an M4x10 screw tightened with a T15 Torx key for a secure, repeatable connection. Can the inserts be quickly indexed to extend life? Yes — the accepted XNKT 0805 inserts provide four usable cutting edges for rapid indexing and reduced tool change frequency. What is the product SKU for ordering? The item is listed under SKU T900-1TM for quick reference in orders and enquiries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact 40 mm diameter, internal coolant and four cutting edges to improve chip control and reduce cycle times; order directly via Metav Werkzeuge or consult our specialists for application advice. Corner insert head for APKT 1705 indexable inserts — 40 mm, internal coolant (Teknik Makina) The corner insert head is a compact turning holder engineered for APKT 1705 indexable inserts, ideal for precision finishing and versatile turning tasks in small‑to‑medium batch production. 40 mm diameter for compact tool setups Internal coolant channel for better chip control Compatible with APKT 1705 indexable inserts Four cutting edges, L45 mm overall length Higher accuracy and predictable tool life for turning operations The holder is designed to deliver consistent geometry and repeatable clamping to support stable turning processes. With a 40 mm body and a 16 mm shank, the assembly fits compact tool posts while maintaining rigidity. The connection geometry minimises deflection under load, which translates into better surface finishes and longer insert life. Compatibility with APKT 1705 inserts ensures straightforward tool procurement and predictable cutting data, so planners and production engineers can integrate the component into standardised tool lists without elaborate requalification. Improved cooling and maintenance that reduce downtime An integrated internal coolant channel directs cutting fluid close to the cutting edge, improving lubrication and chip evacuation. This focused coolant flow lowers cutting temperatures and helps avoid built‑up edge, which prolongs insert life and reduces unplanned stops. Maintenance is straightforward: the clamping screw is secured with a T15 Torx key and a M4x10 screw, enabling quick insert changes and repeatable torque values. The result is a holder that supports efficient shift‑to‑shift handovers and keeps mean time between interventions to a minimum. Robust build for steady production and compatibility with major insert lines Constructed for workshop resilience, the tool head combines a compact footprint with a four‑edge indexing concept that maximises value per insert. The overall length of L45 mm and a weight of 0.239 kg balance reachable cutting edges with stability in feeds and light interruptions. Manufactured to fit Taegutec APKT 1705 inserts, the design helps maintenance teams standardise on a limited assortment of spare parts while ensuring reliable clamping forces under typical turning feeds and speeds. For machining operations requiring reliable chip evacuation and compact tool geometry, contact Metav Werkzeuge for a tailored recommendation for the Teknik Makina corner insert head and to discuss suitable APKT 1705 inserts and cutting data. Email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a technical consultant. Technical Data SKU: T550-1TM Product: Corner insert head for APKT 1705 indexable inserts Manufacturer: Teknik Makina Label: 40mm Eckmesserkopf APKT 1705 L45mm mit Innenkühlung Facts Diameter: 40 mm Shank diameter: 16 mm Overall length: 45 mm Weight: 0.239 kg Cutting edges: 4 Cutting angle: 90° Special features Internal coolant: yes Compatible inserts: APKT 1705 indexable inserts Compatible insert manufacturer: Taegutec Torx key: T15 Torx screw: M4x10 ECLASS: 21181015 Product type: Corner insert head FAQ What insert type fits this holder? The holder accepts APKT 1705 indexable inserts; it is designed to work directly with those insert geometries for predictable seating and clamping. Is internal coolant available with this tool head? Yes — the corner insert head features an internal coolant channel to deliver fluid close to the cutting zone and support improved chip control. Which Torx key and screw are required for insert clamping? Insert clamping uses a T15 Torx key and an M4x10 screw as supplied in the technical specification (SKU T550-1TM). Can the holder be used with inserts from other manufacturers? The design is matched to the APKT 1705 insert form; inserts from other manufacturers with the same designation and seating geometry, such as Taegutec, are compatible where the geometry conforms. What are the main dimensional constraints to consider when fitting this head? Key dimensions are 40 mm body diameter, 16 mm shank diameter and L45 mm overall length; these determine clearance and toolpost compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust design that combines secure clamping and proven insert compatibility for efficient shoulder and face turning; order directly via Metav Werkzeuge or contact their consultants for technical advice. Corner tool head T649TM — for SPMT 1204 indexable inserts, Ø 40 mm, Teknik Makina The Corner tool head is a sturdy turning head for precise shoulder and face turning operations, designed to accept SPMT 1204 indexable inserts and to fit standard 16 mm shanks For SPMT 1204 indexable inserts Ø 40 mm head diameter Shank diameter 16 mm Torx M5x12 fastening, key T20 Improved cycle times through stable cutting geometry The compact turning head delivers precision and repeatability by combining a Ø 40 mm head with a three-edged cutting arrangement. The geometry minimises chatter and promotes consistent chip formation when using SPMT 1204 indexable inserts, which translates into higher first-pass yields and fewer reworks. This stability supports faster feeds and moderate increases in cutting speed where the workpiece and machine allow, improving throughput without compromising surface quality. Reduced setup time and secure fastening for continuous production A dedicated M5x12 Torx fastening screw, tightened with a T20 key, ensures reliable insert clamping and predictable torque values during maintenance. The 16 mm shank diameter provides a compact interface that fits common toolholders while maintaining axial and radial rigidity; at 0.253 kg the head adds minimal inertia, aiding quick tool changes and low spindle load. These attributes lower fixture adjustments and reduce machine downtime between jobs. Fewer SKUs, faster replacement — streamlined workshop logistics Compatibility with standard indexable inserts such as SPMT 1204 simplifies inventory and enables swift on-site replacement. The use of common fastening hardware reduces the need for specialised tools, allowing maintenance teams to perform insert changes with familiar equipment. For small workshops and production halls alike, this means less stock to manage and quicker recovery after tooling wear, improving overall equipment effectiveness. Built for reliable, day-to-day turning in industrial environments Designed for robust turning tasks, the head’s construction supports consistent performance across repeated cycles. The combination of a compact footprint and sturdy clamping contributes to predictable tool life and machining results, making the component suitable for both jobbing work and serial production. Backed by established distribution channels, this solution fits into a reliable supply chain for European workshops that require dependable tooling and short lead times. For Teknik Makina’s corner tool head T649TM with Ø 40 mm and SPMT 1204 compatibility, contact Metav Werkzeuge in Emmerich for tailored advice and rapid supply — eMail info@metav-werkzeuge.com | Tel +49 2822 7131930 Technical data Article number: T649TM Manufacturer: Teknik Makina Designation: Corner tool head for SPMT 1204 indexable inserts Core data Head diameter: 40 mm Overall length: 40 mm Shank diameter (reception): 16 mm Weight: 0.253 kg Number of cutting edges: 3 Fastening screw: M5x12 Torx key size: T20 Features For SPMT 1204 indexable inserts Compact design for reduced spindle load Suitable for shoulder and face turning Quick insert change with Torx fastening Proven turning performance as stated in description FAQ What type of inserts fit this tool head? The corner tool head T649TM is designed specifically for SPMT 1204 indexable inserts, ensuring a precise seating and correct cutting orientation for shoulder and face turning. Which fastening method secures the insert? Insert clamping is achieved with an M5x12 Torx screw; assembly and disassembly require a T20 Torx key for consistent torque and secure fixation. What is the shank size and does it fit common toolholders? The reception shank measures 16 mm, matching widely used toolholder standards for compact turning heads and enabling straightforward integration into existing setups. Is the tool head suitable for continuous production work? Yes — the design emphasises rigidity and predictable clamping, which supports repeated cycles in production environments while maintaining part accuracy and surface quality. How heavy is the component and what is the impact on spindle load? The head weighs 0.253 kg, offering a low added mass that helps to keep spindle inertia down and contributes to responsive tool changes and controlled machining dynamics. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

There is a data inconsistency for SKU T571TM: the product compatibility fields conflict — one entry specifies “for ANKX 1205 Indexable Inserts” while another lists “ANKX 125” as the compatible insert type. This contradiction affects the core specification of the turning head and prevents a reliable technical description or recommendation from being produced. Please verify which ANKX series is correct (1205 or 125) and confirm the intended insert size and compatibility with ISCAR inserts before further publication. Once the correct compatibility details are provided, a full product description, technical data and purchasing information can be created, ensuring accuracy and clarity for potential buyers.

Take advantage of a compact, 90° turning solution that pairs precision with quick insert changes; the combination of a 16 mm shank, Ø 40 mm head and compatibility with R390-1704 indexable inserts ensures stable shoulder turning and efficient tool management — order via Metav Werkzeuge or consult their specialists for technical integration. Corner tool head T402TM — 90° indexable insert holder for R390-1704 (Teknik Makina) The Corner tool head T402TM is a 90° turning holder designed for use with R390-1704 indexable inserts, intended for precise shoulder and finishing operations on lathes and turning centres. 90° cutting head for accurate shoulder turning Compatible with Sandvik R390-1704 inserts 16 mm shank diameter, Ø 40 mm head Torx M3.5x8.5 screw, T15 key required Accurate 90° geometry for repeatable shoulder turning A true benefit of a 90° cutting angle is predictable tool engagement when machining shoulders or form features. The holder’s geometry secures the insert at a right angle to the workpiece, reducing deflection and making precision turning more consistent across batches. Support for R390-1704 inserts combines widely available insert grades with a holder designed to keep cutting insert position stable, which reduces rework and increases first-pass yield in production. Compact mounting that improves stability and changeover times The compact design — 16 mm shank, Ø 40 mm head and 45 mm overall length — keeps the centre of mass close to the lathe spindle, improving rigidity without excessive overhang. The light weight (0.276 kg) lowers inertia for faster tool indexing and less vibration during short-cycle operations. Insert retention uses a Torx M3.5x8.5 screw and T15 key, providing secure clamping torque and straightforward insert changes; the arrangement supports maintenance-friendly workflows and predictable tightening levels for repeatable setup. Workshop advantages: compatibility, stock efficiency and durability Compatibility with Sandvik type R390-1704 inserts means the holder integrates with commonly stocked grades, simplifying procurement and reducing the number of toolholders required for multi-material work. The holder features 4 cutting edges (indexable inserts), extending effective tool life before replacement is needed and lowering unit tooling cost over time. Robust construction and straightforward fixing details make the head a durable, low-maintenance choice for machine shops seeking reliable, high-uptime turning solutions. For tailored advice on integrating the T402TM into existing setups or to confirm current stock, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T402TM Manufacturer: Teknik Makina Product: Corner tool head for R390-1704 indexable inserts Dimensions & weight Head diameter: 40 mm Shank diameter (d): 16 mm Overall length: 45 mm Weight: 0.276 kg Cutting angle: 90° Features & compatibility Compatible inserts: R390-1704 Compatible insert manufacturer: Sandvik Torx screw: M3.5x8.5 Torx key: T15 Number of cutting edges: 4 FAQ Which inserts fit this holder? The corner tool head T402TM accepts R390-1704 indexable inserts; compatibility is specified for Sandvik-style inserts and similar ISO-compatible grades. How is the insert secured in the holder? Insert clamping is provided by a Torx M3.5x8.5 screw tightened with a T15 key, offering consistent clamping force and easy insert replacement. What shank diameter is required for mounting? The holder uses a 16 mm shank diameter for the tool post or turret seat; this compact shank aids rigidity while keeping overhang low. Is the head suitable for precision shoulder turning? Yes — the 90° cutting geometry and stable head design make the T402TM appropriate for accurate shoulder and finishing turning operations on production lathes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 90° cutting geometry, durable construction and straightforward fastening for reliable shoulder turning and profiling; order the component via Metav Werkzeuge or request application guidance from the consultants at Metav Werkzeuge GmbH. Eckmesserkopf T498TM – 90° indexable insert holder for VCGT 1604, Ø 40 mm (Teknik Makina) The Eckmesserkopf T498TM is a 90° insert holder engineered for precision external turning and square-shoulder operations with VCGT 1604 indexable inserts. 90° cutting angle for square shoulder turning Designed for VCGT 1604 indexable inserts 40 mm head diameter, robust construction Torx M4x10 fastening, T15 key required Higher process reliability through defined geometry and build The 90° corner geometry delivers consistent shoulder profiles and predictable chip flow even in repeat production. Manufactured for CNC turning applications, this tool head combines a 40 mm head diameter with a compact overall length of 52 mm to provide stability in tight setups. The result is reduced vibration and improved surface finish, which shortens downstream rework and keeps cycle times steady. Fast, secure clamping for efficient insert changes Clamping is handled by a Torx screw M4x10 with a T15 key, enabling quick insert replacement and consistent seating without elaborate adjustments. The shank Ø 16 mm ensures a solid connection to common tool holders in small-to-medium turning stations. These features promote predictable tool life and minimise downtime during shift changes, supporting continuous production in busy workshops. Clear compatibility and application scope for planners Designed specifically for VCGT 1604 indexable inserts, the head offers a straightforward solution for profiling, shoulder turning and parting-related face work where a defined 90° edge is required. The component’s modest mass (approx. 0.277 kg) and standardised fastening mean effortless integration into existing tool portfolios and easy inventory management for maintenance teams and purchasing agents alike. Built for workshop endurance and straightforward logistics The construction emphasises robustness and repeatability rather than novelty: straightforward fastening geometry, standard Torx hardware and an industry-standard insert size help to keep spare-part lists short. For production planners this translates into predictable stocking, fewer special tools and quicker turnarounds when replacing worn components—factors that support stable throughput and lower total cost of ownership over time. For application advice and reliable supply from Emmerich, contact Metav Werkzeuge GmbH by phone or e‑mail to discuss the suitability of the Teknik Makina Eckmesserkopf T498TM for specific machining tasks. Technical data Article number: T498TM Manufacturer: Teknik Makina For inserts: VCGT 1604 Indexable Inserts Torx screw: M4x10 Torx key: T15 Facts Head diameter: 40 mm Shank diameter (aufnahme): 16 mm Overall length: 52 mm Weight: 0.277 kg Cutting angle: 90° Special features For VCGT 1604 indexable inserts Torx M4x10 fastening T15 key required Three cutting edges 90° corner tool head FAQ Which inserts fit this holder? The holder is designed for VCGT 1604 indexable inserts; the Eckmesserkopf T498TM secures these inserts for standard shoulder and profiling operations. What fastening hardware is required? Fastening is performed with a Torx M4x10 screw; a T15 Torx key is recommended for correct torque and repeatable seating. Is the tool head compatible with standard 16 mm shanks? Yes, the tool accepts a 16 mm shank connection, making it compatible with common compact tool posts and holders. What benefits does the 90° geometry provide? A 90° cutting angle gives exact square shoulders and stable cutting forces, improving surface finish and enabling consistent repeatability in series production. What is the overall length and weight for setup planning? The component has an overall length of 52 mm and a weight of approximately 0.277 kg, facilitating balance and fixture calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 90° cutting angle, compatibility with XNKT 0805 indexable inserts and a compact 16 mm shank for stable mounting and predictable shoulder turning results; order via Metav Werkzeuge or consult our specialists for fitment advice. Corner turning head T900TM — 90° indexable-insert tool for shoulder turning (Teknik Makina) A compact corner turning head designed for machining with XNKT 0805 indexable inserts in confined toolholders 90° cutting angle for accurate shoulder turning Compatible with Korloy XNKT 0805 inserts 16 mm shank for compact toolholder mounting Four cutting edges for extended tool life Consistent shoulder accuracy for repeatable parts The 90° cutting angle of this corner turning head delivers reliable right-angle shoulder faces with minimal set-up variation. By using XNKT 0805 indexable inserts, the tool allows rapid insert indexing and repeatable geometry without complex adjustments. The 40 mm diameter and the design with four cutting edges help distribute wear evenly, which reduces frequency of interventions and supports a steady production rhythm. This results in lower overall machining variability and a shorter path from setup to first good part. Quick installation and simple insert changes to save time Fitting and maintaining the head is straightforward: the 16 mm shank suits compact toolholders while the fastening relies on an M4x10 Torx screw tightened with a T15 key, so insert swaps become routine tasks rather than lengthy interruptions. The modest 45 mm overall length and mass of 0.296 kg keep the assembly balanced on small lathes and CNC turrets, reducing spindle load and enabling higher process stability. The concept of indexable inserts is explained here: each replaceable insert provides a fresh cutting edge without removing the holder, which lowers tooling costs and shortens downtime. Durable pairing for workshop productivity and predictable running Designed for compatibility with Korloy and similar suppliers, the head’s geometry supports a wide range of turning operations while maintaining robustness in everyday use. The compact build and clear specification promote predictable tool life and reduced scrap rates, contributing to a measurable improvement in throughput. Selecting parts from a trusted source reduces procurement risk, and a well‑matched corner turning head like this one helps workshops focus on machining quality rather than frequent tool changes or uncertain fitments. For secure supply and expert advice on fitting the Teknik Makina corner turning head T900TM, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to check compatibility with existing toolholders and to reserve stock. Technical data Article number: T900TM Manufacturer: Teknik Makina Key dimensions and weights Diameter: 40 mm Shank diameter: 16 mm Overall length: 45 mm Weight: 0.296 kg Cutting edges: 4 Cutting angle: 90° Compatibility & fastening Compatible inserts: XNKT 0805 Compatible insert manufacturer: Korloy Fastening screw: M4x10 Torx Required Torx key: T15 FAQ Which insert type fits this head? The corner turning head accepts XNKT 0805 indexable inserts; it is compatible with Korloy XNKT 0805 grades and geometries specified for shoulder turning. What shank size is required for mounting? This T900TM tool uses a 16 mm shank and is intended for compact toolholders that accept a 16 mm holder diameter. How are the inserts secured and which tool is needed? Inserts are clamped with an M4x10 Torx screw; a T15 Torx key is used for tightening and removal. Is the tool suitable for right‑angle shoulder machining? Yes — the 90° cutting angle is designed specifically for accurate right‑angle shoulders and similar facing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, reliable turning head that combines a 90° cutting angle, compatibility with APMT 0903 indexable inserts and a 16 mm shank for secure mounting — the result is consistent shoulder machining and reduced setup times. Order the item directly via Metav Werkzeuge or consult our specialists for application advice. Corner turning head T239TM — 90° indexable insert holder by Teknik Makina, compatible with APMT 0602–0903 Corner turning head T239TM designed for 90° shoulder and corner turning operations, suitable for workshop and CNC applications using APMT 0903 indexable inserts 90° cutting angle for precise shoulders Compatible with APMT 0903 indexable inserts 16 mm shank diameter for secure clamping Torx screw M2.5x5.5, T8 key Accurate 90° shoulders with consistent results The head is engineered around a true 90° cutting angle to deliver repeatable shoulder and corner turning. By accepting APMT 0903 indexable inserts, the holder enables economical tool management: worn edges are replaced quickly without resetting the tool geometry, which minimises downtime. The compact body and tailored geometry result in improved process stability and a reduction in secondary finishing operations for many common turning tasks. Secure mounting and fast insert changes for high productivity With a 16 mm shank and a moderate overall diameter, the turning head provides secure clamping in standard toolholders while remaining manoeuvrable in tighter set-ups. The insert is fastened with a Torx screw M2.5x5.5 (T8), allowing reliable torque transmission and a repeatable clamping force. The combination of a low mass and robust attachment contributes to vibration damping and extended insert life, supporting efficient production cycles in small-batch and serial work alike. Practical workshop advantages and broad compatibility The component’s dimensions (40 mm diameter, 40 mm overall height) and light weight (0.25 kg) make it suited to mixed production environments where quick changeovers are important. Compatibility with Korloy-type indexable inserts expands options for grade and geometry selection depending on material and finish requirements. The holder is designed for straightforward integration into existing tooling systems, helping shops maintain flexibility without extensive retooling. For tailored advice on integrating the Teknik Makina T239TM corner turning head into specific machining processes, or to request a personalised offer, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T239TM Manufacturer: Teknik Makina ECLASS: 21181015 Shank diameter: 16 mm Diameter: 40 mm Overall height: 40 mm Weight: 0.25 kg Cutting angle: 90° Number of cutting edges: 5 Compatible with APMT 0903 indexable inserts Suitable for Korloy inserts Torx screw: M2.5x5.5 Torx key size: T8 SKU: T239TM FAQ Which indexable inserts fit this turning head? The turning head is compatible with APMT 0903 indexable inserts; Korloy inserts in this size range are suitable options for a wide range of materials. What is the required shank diameter for mounting? Mounting requires a 16 mm shank connection; the 16 mm shank ensures stable seating in standard holders. How is the insert secured to the holder? The insert is fastened with a Torx screw M2.5x5.5, using a T8 key for reliable clamping and repeatable torque. Is the head suitable for precision shoulder turning? Yes — the design focuses on delivering precise 90° shoulders, offering repeatable geometry and reduced rework for shoulder and corner operations. What are the physical dimensions and mass of the tool head? The tool head measures 40 mm in diameter with a 40 mm overall height and weighs 0.25 kg, providing a balance of rigidity and compactness for varied applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable machining performance with internal coolant, a 40 mm diameter and compatibility for ADKT 1505 indexable inserts ensure stable cutting and efficient chip control. Order directly via Metav Werkzeuge or contact our consultants for application advice and selection support. Corner turning head for ADKT 1505 indexable inserts — 40 mm, internal coolant (Teknik Makina) Corner turning head designed for external turning operations using ADKT 1505 indexable inserts, combining compact dimensions with through-coolant capability for improved tool life and surface quality 40 mm diameter for compact operations Integrated internal coolant Compatible with ADKT 1505 inserts (ISCAR) Precision and cutting performance that keeps production steady The corner turning head is engineered for repeatable results in batch and single-piece turning. With a 40 mm nominal diameter and an overall length of 45 mm, the tool body offers a compact footprint while maintaining stiffness; this combination reduces vibration and supports consistent geometry on turned parts. The head accepts ADKT 1505 indexable inserts, providing four usable cutting edges and a 90° cutting angle that is suited for shoulder turning and profile work. At a weight of 0.27 kg, spindle load is minimised without compromising rigidity, so cycle times can be kept short and tool life extended through stable cutting conditions. Internal coolant and chip management for cleaner machining The integrated internal coolant channel delivers coolant directly to the cutting zone, which improves chip evacuation and helps to maintain cutting edge temperatures. As a result, surface finish is enhanced and tool wear is reduced under continuous operation. Because coolant reaches the insert interface, lubricating and cooling effects act where they are most effective, which can lead to fewer interruptions for manual cleaning and lower risk of built-up edge. Where materials and cutting data allow, this direct cooling supports higher metal removal rates and more predictable process windows. Practical mounting and service-friendly design for fast changeovers Assembly and indexing are simplified: the head uses M4x10 Torx screws and a Torx T15 drive for secure fastening and quick insert changes, while four cutting edges minimise downtime between regrinds or replacements. Compatibility with ISCAR ADKT 1505 inserts ensures access to a wide range of chipformers and grades for different materials. The compact design supports use in tight toolheads and multi-spindle layouts, and the measured balance between mass and stiffness makes the unit suitable for precision workshops and production cells where repeatability and reliability matter most. For application advice or to specify Teknik Makina tooling with internal coolant capability for your turning processes, contact Metav Werkzeuge for tailored recommendations and rapid supply Technical data SKU: T200-1TM Product type: Corner turning head (Eckmesserkopf) Label: 40 mm corner turning head ADKT 1505 L45 mm with internal coolant Measurements Diameter: 40 mm Overall length: 45 mm Weight: 0.27 kg Cutting edges: 4 Cutting angle: 90° Fastening screw: M4x10 Torx drive: T15 Features & compatibility Internal coolant (through-tool cooling) For ADKT 1505 indexable inserts Compatible with ISCAR inserts Four usable cutting edges for reduced changeover frequency Compact design for tight tool stations FAQ Is this head suitable for standard ADKT 1505 inserts? The corner turning head (SKU T200-1TM) is designed specifically for ADKT 1505 indexable inserts and is compatible with standard ISCAR grades and chipformers intended for that insert type. Does the tool provide through-coolant capability? Yes, the tool body features internal coolant delivery to the cutting edge; this improves chip evacuation and helps control cutting temperatures during machining. Which fastening hardware is required for insert clamping? The head uses M4x10 Torx screws and requires a Torx T15 driver for secure clamping and straightforward insert changes. Can this head be used in compact toolholders and multi-spindle machines? The compact dimensions (40 mm diameter, 45 mm overall length) and lightweight construction make the head suitable for tight tool stations and multi-spindle installations where space and repeatability are critical. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 40 mm diameter head with internal coolant and a precise 90° cutting angle to improve cycle times and tool life; order directly via Metav Werkzeuge or ask our consultants for tailored recommendations. Square tool head for ANKX 1205 indexable inserts, 40 mm, internal coolant (Teknik Makina) A square tool head engineered for stable turning and finishing with ANKX 1205 indexable inserts, offering internal coolant and a compact 40 mm design for efficient chip control. 40 mm diameter head Internal coolant supply Compatible with ANKX 1205 inserts 90° cutting angle, 4 cutting edges Delivering consistent cutting performance with internal coolant The compact design combines a 40 mm diameter with integrated internal coolant, enabling controlled coolant delivery directly to the cutting edge. This reduces thermal load and helps maintain edge geometry, which translates into longer tool life and more consistent surface finishes. Designed for indexable-insert turning operations, the head accepts ANKX 1205 inserts and supports stable machining across short to medium overhangs, improving process reliability on repetitive production runs. Secure clamping and quick serviceability for minimal downtime Fast, repeatable insert changes are supported by a robust fastening system using a T15 Torx interface and M4x10 mounting screws, ensuring precise seating of the insert pocket and reliable clamping force. The head features four cutting edges and a 90° cutting angle, which provides predictable cutting geometry for facing and shoulder turning. At just 0.215 kg, the unit reduces spindle load and simplifies tool handling during setup, helping to keep changeover times short and machining throughput high. Workshop compatibility and practical advantages for production Suitable for use with ISCAR-manufactured inserts of the ANKX 1205 family, this turning head (SKU T571-1TM) integrates into existing toolholding systems without complex adjustments. The compact overall length and standard interface make it straightforward to fit into turret stations or custom holders while the internal coolant option supports machining of materials where controlled cooling and chip evacuation are beneficial. The combination of compatibility, coolant support and standard fastenings makes this head a pragmatic choice for workshops seeking dependable repeatability. For availability and expert advice on the Teknik Makina square tool head with internal coolant, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: T571-1TM Manufacturer: Teknik Makina Product type: Square tool head SKU: T571-1TM Internal coolant: Yes Compatible inserts: ANKX 1205 (ISCAR) Measurements / Core data Diameter: 40 mm Overall length: 40 mm Weight: 0.215 kg Cutting angle: 90° Cutting edges: 4 Materials & special features Torx key: T15 Torx screw: M4x10 Designed for indexable inserts ANKX 1205 Compact design for turret integration FAQ Which insert type fits this tool head? The head is designed for ANKX 1205 indexable inserts and is compatible with inserts supplied by ISCAR. Does the head provide internal coolant? Yes, the tool head features internal coolant delivery to the cutting zone to support chip control and thermal management. What fastening hardware is required for the insert? Insert fastening uses a Torx T15 interface with an M4x10 screw, as specified for the tool head. Is the head suitable for facing and shoulder turning? Yes, the 90° cutting angle and four cutting edges make it suitable for facing and shoulder operations in turning applications. What is the SKU for ordering or reference? The product is listed under SKU T571-1TM and is supplied by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact 40 mm diameter and integrated internal coolant combined with a robust 90° cutting angle to deliver precise shoulder finishes and reliable cycle times; order the item directly via Metav Werkzeuge or consult our specialists for application-specific advice. Corner turning head T181-1TM — 40 mm diameter, internal coolant (Teknik Makina) The Corner turning head T181-1TM is a compact toolholder engineered for turning operations with AP-- 1604 indexable inserts, offering controlled coolant delivery and stable performance in confined machining environments. 40 mm diameter for compact turning Internal coolant enhances cooling and tool life Compatible with AP-- 1604 inserts by Korloy Four cutting edges with 90° cutting angle Precision turning in confined spaces for consistent part geometry The compact design centres on a 40 mm diameter body and a total length of 45 mm, enabling access to restricted work envelopes while maintaining rigidity. This geometry supports accurate shoulder and radius work, translating the tool’s dimensional specifications into consistent component tolerances and repeatable results. With four cutting edges arranged at a 90° cutting angle, the head provides stable cutting conditions and predictable forces during engagement, which reduces vibration and improves surface finish. The combination of compactness and structural stability makes this turning head a practical choice for production lines where space and repeatability are decisive. Optimised coolant routing to extend insert life and productivity Integrated internal coolant directs fluid close to the cutting zone to improve heat control and chip evacuation. Focused coolant application reduces the thermal load on the insert, lowering the risk of built-up edge and premature wear; this can translate into longer insert life and fewer tool changes per batch. For operations using AP-- 1604 indexable inserts, the improved cooling can allow higher sustained cutting parameters and better process stability, delivering clear gains in throughput without sacrificing component quality. Fast, reliable clamping for efficient insert changes Mechanical details support straightforward maintenance and secure clamping: the head uses a T15 Torx key and M4x10 Torx screw for insert retention, allowing quick insert changes and minimal downtime. The relatively low mass (0.258 kg) aids dynamic balance on driven tool spindles and contributes to smoother rotation at higher speeds. Compatibility with Korloy AP-- 1604 inserts simplifies procurement and stock management for workshops standardising on that insert family, helping to reduce set-up complexity across varied production tasks. Designed for robust industrial use and versatile applications Built as a practical solution for mixed-production environments, the head converts its technical attributes into operational benefits: compact form for tight set-ups, internal cooling for demanding cycles, and a familiar insert interface for fast replacement. The construction supports repeatable results across short runs and series production alike, making it suitable for precision workshops and subcontractors seeking a balance between accessibility and machining performance. For reliable delivery and application guidance on the Teknik Makina T181-1TM corner turning head with internal coolant, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and ordering from our Emmerich distribution centre Technical Data Article number: T181-1TM Manufacturer: Teknik Makina Product type: Corner turning head Compatible inserts: AP-- 1604 (Korloy) Data Diameter: 40 mm Overall length: 45 mm Weight: 0.258 kg Number of cutting edges: 4 Cutting angle: 90° Torx key: T15 Torx screw: M4x10 Special features Internal coolant For AP-- 1604 indexable inserts Suitable for Korloy inserts FAQ What insert type fits this tool? The head accepts AP-- 1604 indexable inserts; the design is compatible with Korloy AP-- 1604 grades. Does the tool provide internal coolant? Yes, the T181-1TM corner turning head features internal coolant routed to the cutting zone. How many cutting edges are available per head? The design incorporates four cutting edges and a 90° cutting angle for shoulder and corner turning. Which fastening hardware is required for insert changes? Insert clamping uses a T15 Torx key and M4x10 Torx screw for secure and quick replacements. Is the head suitable for tight-access turning operations? The compact 40 mm diameter and 45 mm overall length make the head appropriate for machining in confined spaces while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 40 mm compact diameter, integrated internal coolant and compatibility with AP-- 1604 indexable inserts delivers reliable, high-quality shoulder turning in confined setups; the robust Torx assembly and short overhang help to reduce vibration and extend insert life. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed. Corner turning head T180-1TM — 40 mm, internal coolant (Teknik Makina) The corner turning head T180-1TM is a compact turning solution for precision shoulder work, designed for use with AP-- 1604 indexable inserts and optimised for tight installation spaces. 40 mm compact diameter for tight operations Integrated internal coolant for improved cooling Compatible with AP-- 1604 Korloy indexable inserts 90° cutting angle with three cutting edges Maximise stability in confined setups A short overall length combined with a 40 mm diameter and 45 mm overall length reduces overhang and increases rigidity in cramped tool positions. The reduced moment at the cutting edge lowers the tendency to chatter, which leads to more consistent surface finishes and longer tool life. With a mass of 0.267 kg, the unit is light enough for quick indexing yet heavy enough to absorb minor cutting forces, supporting predictable machining behaviour in medium-duty turning and profiling tasks. Controlled coolant flow for predictable machining The built‑in internal coolant channel directs fluid close to the cutting zone, improving lubrication and chip evacuation where access is restricted. This direct cooling reduces the thermal load on the insert and helps to prevent built-up edge, which translates into steadier cutting performance and extended insert life. For operations that demand repeatable finishes, such controllable coolant delivery is a practical advantage and helps to maintain consistent cycle times on batches. Reliable assembly and quick insert changes Assembly and maintenance are simplified through a standard Torx T15 interface and M4x10 fastening screw, providing a secure clamp with minimal setup time. The robust Torx connection ensures repeatable seating and quick insert replacement, which supports efficient shopfloor workflows and reduces downtime during tool changes. The head’s mechanical simplicity makes it straightforward to integrate into existing holders and turrets that accept the same interface standards. Versatile indexing and predictable tool geometry Designed for AP-- 1604 indexable inserts and compatible with Korloy insert variants, the head presents a 90° cutting angle and three cutting edges, enabling effective shoulder turning and precise cornering tasks. The geometry supports both roughing and finishing passes when paired with the appropriate insert grade, and the standardised interface facilitates rapid supply chain integration. This makes the solution suitable for shops aiming to consolidate tooling with a reliable, repeatable tool head. For secure procurement and technical advice on integrating the Teknik Makina T180-1TM into existing setups, contact Metav Werkzeuge’s advisors via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery options Technical data Article number: T180-1TM Product type: Corner turning head Manufacturer: Teknik Makina Core data Diameter: 40 mm Overall length: 45 mm Weight: 0.267 kg Cutting angle: 90° Cutting edges: 3 Special features Internal coolant: Yes For indexable inserts: AP-- 1604 Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this turning head? The head is designed for AP-- 1604 indexable inserts; compatible Korloy grades are suitable when matched to the intended operation. Does the tool provide internal coolant? Yes, the T180-1TM incorporates internal coolant to direct fluid to the cutting zone for improved cooling and chip control. What operations is the head intended for? The turning head is intended for shoulder turning and cornering tasks where a 90° approach and compact tool geometry are required. Which assembly tools are required? Assembly uses a Torx T15 interface with an M4x10 fastening screw for secure clamping and repeatable seating. How many cutting edges does the head provide? The head supports three cutting edges, enabling effective indexing and balanced cutting routines. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact 40 mm corner head with internal coolant and a 90° cutting angle offers precise shoulder turning and improved tool life; order directly via Metav Werkzeuge or consult their specialists for application advice. Eckmesserkopf – Corner tool head, 40 mm with internal coolant (Teknik Makina) The Eckmesserkopf is a compact corner tool holder designed for shoulder turning and finishing with APKT 1003 indexable inserts, ideal for light to medium turning operations in workshop and production environments. 40 mm diameter for compact turning heads Built-in internal coolant channel Compatible with APKT 1003 indexable inserts Torx T8 fastening; M2.5x5.5 screws High repeatability and stable geometry for shoulder turning The compact head provides a consistent 90° cutting angle and a rigid mounting interface that reduces vibration during short overhang operations. Its 40 mm footprint helps to keep the cutting point close to the tool post, which improves dimensional stability and repeatability in series turning tasks. The sturdy construction and precise geometry result in reliable surface finishes and lower scrap rates when performing shoulder cuts and light profiling. Improved tool life and chip control through internal coolant An integrated internal coolant channel directs cutting fluid close to the cutting edge, which supports efficient cooling and improved chip evacuation. This cooling strategy often extends insert life and helps maintain surface quality at higher cutting speeds. The holder is prepared for APKT 1003 inserts and is specified for Korloy inserts in its standard configuration, ensuring a combination of accessible insert grades and efficient heat management for tougher finishes. Quick, secure fastening and service-friendly design The clamping concept relies on a Torx T8 drive and M2.5x5.5 screws, enabling secure fastening with common workshop tools and straightforward routine maintenance. The compact mass (approx. 0.277 kg) minimises inertia for rapid tool changes and reduces spindle load during indexing. The clearly defined fastening sizes make replacement and reassembly predictable, shortening downtime and simplifying inventory of spare parts. Practical workshop applications and inventory benefits Designed for versatile use in turning centres, the head suits shoulder turning, light profiling and finishing passes where space is limited or a compact tool arrangement is required. Compatibility with the APKT 1003 insert geometry helps standardise insert stocks across machines, while the internal coolant option supports higher productivity with fewer insert changes. Supplied under the SKU T176-1TM, the component offers a pragmatic balance between compact design and functional performance for everyday production needs. Contact Metav Werkzeuge for tailored application advice and fast supply of the Teknik Makina corner head T176-1TM — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T176-1TM Product type: Corner tool head Brand: Teknik Makina ECLASS: 21181015 Numbers / Core technical data Diameter: 40 mm Overall length: 40 mm Weight: 0.277 kg Cutting edges: 5 Cutting angle: 90° Torx key: T8 Torx screw: M2.5x5.5 Special features / Versions Internal coolant: yes Compatible inserts: APKT 1003 Suitable insert manufacturer: Korloy Label: 40mm Eckmesserkopf APKT 1003 L40mm mit Innenkühlung FAQ Is this holder compatible with APKT 1003 inserts? Yes. The holder is specified for APKT 1003 indexable inserts and is marketed for use with Korloy inserts as standard. Does the head provide internal coolant and what are the benefits? The head includes internal coolant, which directs fluid to the cutting zone to reduce temperatures, improve chip flow and often extend insert life. What fastening hardware and tools are required for installation? Mounting uses a Torx T8 drive and M2.5x5.5 screws; these sizes allow secure, repeatable clamping and straightforward servicing. For which machining tasks is this corner head best suited? The component is optimised for shoulder turning, light profiling and finishing operations where a compact head and close cutting point are advantageous. Which SKU identifies this tool and who manufactures it? The tool is supplied under SKU T176-1TM and manufactured by Teknik Makina, listed under the supplied product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact geometry, secure Torx clamping and proven compatibility with APKT 1604 indexable inserts for reliable and repeatable external turning. Order the component directly via Metav Werkzeuge or consult our specialists for setup advice. Corner cutting head T181TM — 90° cutting angle, 16 mm shank (Teknik Makina) The Corner cutting head is a compact tool holder intended for precision external turning with APKT 1604 indexable inserts, ideal for workshop and light industrial CNC turning applications Compact 16 mm shank for constrained toolposts Compatible with APKT 1604 indexable inserts 90° cutting angle for consistent external turning Secure Torx M4x10 clamping screw, T15 key Stable clamping for consistent surface quality The holder is designed to provide secure clamping of indexable cutters so that machining results remain consistent across batches. With an M4x10 Torx screw and a T15 drive, the assembly minimises micro‑movement at the cutter seat; this reduces chatter and supports a more predictable tool life. As a result, tool changes are straightforward and the process stability contributes directly to fewer rejected parts and lower rework rates. Quick compatibility and predictable indexing Compatibility with APKT 1604 style inserts and recognised manufacturers such as Korloy enables rapid changeovers and access to commonly stocked grades. The holder accepts inserts with four usable edges, which permits multiple indexings before replacement—this conserves tooling costs while keeping uptime high. The combination of standardised insert format and robust clamping offers a pragmatic balance between performance and inventory efficiency for production environments. Space‑saving geometry that eases setup The compact dimensions—16 mm shank, 45 mm overall length and a head diameter of 40 mm—make this holder suitable for tight toolpost arrangements and multi‑station turrets. The 90° cutting angle is tailored for external turning tasks where perpendicular engagement improves dimensional control. At approximately 0.258 kg, the component is light enough to limit additional spindle load yet rigid enough for predictable cutting behaviour in general workshop applications. Choose the Teknik Makina corner cutting head T181TM for reliable 90° external turning and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical guidance Technical data Article number: T181TM Manufacturer: Teknik Makina Facts Shank diameter: 16 mm Overall length: 45 mm Head diameter: 40 mm Weight: 0.258 kg Cutting angle: 90° Number of cutting edges: 4 Special features Compatible with APKT 1604 indexable inserts Suitable for Korloy insert grades Clamping screw: M4x10 Torx Required Torx key: T15 ECLASS: 21181015 FAQ Which insert types fit this holder? The T181TM holder accepts APKT 1604 indexable inserts; compatibility with Korloy‑type inserts is confirmed and the insert is secured with an M4x10 Torx screw. What shank size is required for installation? A 16 mm shank diameter is specified for the holder; the compact form factor and 45 mm overall length suit constrained toolpost setups. What cutting geometry does the tool head provide? The component provides a 90° cutting angle optimised for external turning, offering a stable engagement and consistent dimensional control. How many indexings are available per insert? The compatible APKT 1604 inserts typically provide multiple usable edges; the holder supports four cutting edges per insert, enabling several indexings before replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact 40 mm corner tool head with internal coolant and precise compatibility with BDMT 11T3 indexable inserts; this combination supports stable chip control and consistent results in 90° turning operations. Order the corner tool head directly via Metav Werkzeuge or consult our specialists for integration advice. Corner tool head T533-1TM — 40 mm, internal coolant (Teknik Makina) The corner tool head T533-1TM is a compact indexable turning head for BDMT 11T3 inserts, engineered for 90° operations and optimised chip evacuation via internal coolant. 40 mm diameter head with internal coolant Compatible with BDMT 11T3 indexable inserts Suited to 90° corner turning Torx T8 fastening, M2.5x5.5 screw Compact design that preserves rigidity and accuracy The 40 mm diameter body delivers a balanced combination of accessibility and stiffness for confined setups. By accepting BDMT 11T3 indexable inserts, the head reduces tool-change time and simplifies inventory management through a commonly used insert family. The compact overall length and measured mass contribute to lower overhang, which in turn reduces vibration and supports repeatable surface quality. These factors together maximise cycle stability and raise throughput in batch and job-shop turning. Internal coolant for improved tool life and process reliability Integrated internal coolant channels direct cutting fluid close to the cutting edge, improving chip evacuation and reducing heat at the cutting zone. This targeted cooling prolongs insert life and helps maintain consistent cutting forces during production runs. For processes where coolant access is limited or where controlled flushing improves chip flow, the built-in supply offers a technical advantage that translates directly into fewer interruptions and lower tooling costs over time. Straightforward mounting and maintenance Assembly requires a Torx T8 driver and the specified M2.5x5.5 fastening screw, enabling quick, secure clamping of the insert seat. Familiar fastening standards ease workshop adoption and reduce the risk of incorrect tooling during set-up. The head’s specification also supports simple inspection and replacement routines, keeping maintenance predictable and downtime minimal so production schedules remain stable. Versatile compatibility for standard turning operations Designed for 90° corner turning, the head works with indexable inserts supplied by common manufacturers; it is listed as compatible with Kyocera inserts using the BDMT 11T3 format. The toolhead’s geometry and coolant provision make it suitable for facing, profiling and light shoulder machining where a defined corner cut and consistent chip control are required. This versatility helps consolidate tooling choices while maintaining process reliability across different component families. Contact Metav Werkzeuge to arrange supply of the Teknik Makina corner tool head T533-1TM with internal coolant and confirm fitment for existing toolholders Technical Data SKU: T533-1TM Product type: Corner tool head Manufacturer: Teknik Makina ECLASS: 21181015 Facts Diameter: 40 mm Overall length: 40 mm Weight: 0.224 kg Cutting angle: 90° Cutting edges: 5 Special features Internal coolant Indexable inserts: BDMT 11T3 Compatible inserts manufacturer: Kyocera Fastening: Torx T8 Screw: M2.5x5.5 FAQ Which inserts are compatible with this head? The corner tool head T533-1TM accepts BDMT 11T3 indexable inserts; compatibility with Kyocera-specified BDMT inserts is indicated for consistent fit and seating. Does the head provide through-tool coolant? The T533-1TM is equipped with internal coolant channels that deliver fluid close to the cutting edge, improving chip control and tool life in wet machining. What fastening tools are required for mounting? Mounting uses a Torx T8 driver and the specified M2.5x5.5 screw; these common standards permit secure and repeatable clamping of the insert seat. Is the head appropriate for 90° corner turning only? The geometry is optimised for 90° corner and shoulder work, but the head also suits facing and profiling tasks where BDMT 11T3 inserts and coolant-assisted cutting are advantageous. Can the head be integrated into existing toolholders? Integration depends on the toolholder interface; the T533-1TM’s compact dimensions and common insert format are intended to facilitate straightforward retrofitting in compatible holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of compact 40 mm dimensions, internal coolant and compatibility with BDMT 1704 inserts for efficient corner turning. Order the corner turning head directly via Metav Werkzeuge or consult the technical team for application-specific advice. Corner turning head for BDMT 1704 indexable inserts — 40 mm, internal coolant (Teknik Makina) The corner turning head is a compact indexable turning head designed for precision shoulder and corner work with BDMT 1704 inserts, combining a 90° cutting geometry and through‑coolant capability for consistent surface quality. Internal coolant for improved chip evacuation Compatible with BDMT 1704 inserts (Kyocera) Four cutting edges for extended service life 90° cutting angle for precise corner turning Consistent results through controlled cooling and geometry The compact 40 mm diameter head delivers a predictable cutting geometry that reduces set-up variability and helps maintain dimensional tolerances across repetitive shoulder and face turning operations. The 90° cutting angle creates square shoulders with minimal manual dressing, while the internal coolant channel directs fluid precisely to the insert edge, improving heat management and chip control. This combination supports higher process stability and contributes to reduced scrap rates in serial production. Durable design that minimises downtime A robust construction and four cutting edges extend the service interval between insert rotations and replacements. The clamping uses an M4x10 Torx screw, tightened with a T15 key, allowing rapid insert changes and secure retention. The compact overall length and low weight (0.19 kg) reduce inertial loads on the tool post and support fast, repeatable tool changes, which in turn shortens machine downtime and increases productive machining time. Clear compatibility for straightforward integration Engineered for BDMT 1704 indexable inserts, the head is also compatible with inserts from Kyocera, enabling flexible sourcing and easy retrofit of existing tool setups. The standardised interface simplifies spare‑parts logistics and ensures the head can be integrated into established turning tool systems without special adaptors. Compatible insert geometry guarantees correct seating and cutting performance for common shoulder and profiling tasks. Practical benefits for workshop and small‑series production The small footprint of the head and targeted coolant delivery make it especially useful where access is restricted or where repeated corner turning is required on compact parts. By combining precise coolant supply with a true 90° geometry, the tool improves surface finish and can reduce secondary operations such as manual deburring. The documented technical features support planning for tool life and consumable rotation, helping to forecast maintenance intervals and production costs more reliably. For machine shops seeking reliable corner turning with optimised coolant delivery, contact Metav Werkzeuge to request further technical details or to arrange purchase of the Teknik Makina corner turning head (SKU T537-1TM) via Emmerich; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930. Technical data SKU: T537-1TM Manufacturer: Teknik Makina Facts Diameter: 40 mm Overall length: 40 mm Weight: 0.19 kg Cutting edges: 4 Cutting angle: 90° Screw: M4 x 10 Torx key: T15 Special features For BDMT 1704 indexable inserts Compatible with Kyocera inserts Internal coolant Product type: Corner turning head FAQ What inserts fit this turning head? The corner turning head is designed for BDMT 1704 indexable inserts and is compatible with Kyocera inserts of the same geometry, ensuring correct seating and cutting performance. How does the internal coolant improve machining? Internal coolant supplies fluid directly to the cutting edge; in the Teknik Makina head this reduces thermal load, improves chip evacuation and helps maintain surface finish during extended cuts. How many cutting edges are available before replacement? The head provides four cutting edges, enabling insert rotation to use multiple corners and thereby extending the time between full insert replacements. Which tool is required for insert clamping? Insert clamping uses an M4x10 Torx screw tightened with a T15 key for secure retention and quick servicing. Is the head suitable for compact workpieces and restricted access? Yes; the compact 40 mm diameter and short overall length make the head suitable for restricted‑access shoulder and corner turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust turning solution that combines 40 mm diameter precision, internal coolant and compatibility with BOMT 1304 indexable inserts to keep cycle times consistent and maintenance straightforward. Order directly via Metav Werkzeuge or contact our consultants for application advice. Corner turning head T965-1TM — 40 mm, internal coolant (Teknik Makina) Corner turning head T965-1TM is a compact turning tool head designed for shoulder and face machining with BOMT 1304 indexable inserts, offering internal coolant and a secure Torx fastening system. 40 mm diameter for compact turning Internal coolant for improved chip evacuation Compatible with BOMT 1304 indexable inserts Four cutting edges for longer tool cycles Small footprint, consistent productivity The 40 mm diameter design delivers a compact solution for confined tool stations without compromising rigidity. With a short overall length of 40 mm and a 16 mm shank, the head minimises overhang and reduces vibration, which translates directly into steadier surface finishes and longer insert life. The integrated 90° cutting angle supports accurate shoulder turning and face milling tasks while the balanced geometry maintains cycle-time stability on series parts. Improved cooling and chip control for reliable machining Built-in internal coolant supplies cutting fluid directly to the cutting edge, improving heat dissipation and chip evacuation in continuous operations. This directed cooling reduces thermal load on the insert and cutting edge, helping to preserve cutting performance under elevated cutting conditions. The internal coolant feature is particularly valuable for materials that require controlled heat management, and it simplifies coolant routing in multi-spindle setups. Broad compatibility and straightforward assembly Designed for use with BOMT 1304 indexable inserts, the head ensures rapid insert changes and predictable seating. Compatibility with Ingersoll-style inserts increases flexibility across existing tool inventories. Fastening is secured via a T10 Torx key and M3.5x8.5 screw, providing positive clamping and easy maintenance during shift changes. The unit’s modular interface enables quick replacement of worn heads to reduce machine downtime. Durable construction and easy handling At approximately 0.272 kg, the head is light enough for rapid handling yet engineered for the demands of industrial turning. The four cutting edges extend service intervals by permitting multiple indexings before replacement. Simple mechanical features and standardised fastening tools reduce service time, while the compact form supports high-density turret arrangements for efficient shop-floor layouts. Contact Metav Werkzeuge today for tailored technical advice and reliable supply of the Teknik Makina corner turning head T965-1TM — reach us at info@metav-werkzeuge.com or +49 2822 7131930 for fast, dependable service. Technical data SKU: T965-1TM Manufacturer: Teknik Makina Product type: Corner turning head Label: 40mm Eckmesserkopf BOMT 1304 L40mm mit Innenkühlung UID: T965-1TM Key dimensions Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Weight: 0.272 kg Cutting edges: 4 Cutting angle: 90° Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant Compatible with BOMT 1304 indexable inserts Compatible with Ingersoll insert holders Short overall length for reduced overhang Four usable cutting positions FAQ What inserts does this head accept? The corner turning head accepts BOMT 1304 indexable inserts and is compatible with insert systems from Ingersoll, enabling straightforward integration into existing tooling setups. Is there internal coolant and how is it delivered? Yes, the tool head features internal coolant that is routed to the cutting zone to improve heat control and chip evacuation during turning operations. Which fastening tools are required for assembly? Assembly and insert clamping use a T10 Torx key and an M3.5x8.5 screw for secure, repeatable fixation of the insert seat. What applications suit this tool head best? The head is ideal for shoulder and face turning where a 40 mm compact diameter and a 90° cutting angle provide accurate, space-efficient machining — particularly in multi-station turrets or confined toolholders. How many cutting edges are available before replacement? The design provides four cutting edges, allowing multiple indexings to extend the service interval and reduce tooling costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of proven compatibility with BOMT 1304 inserts, internal coolant and a compact 40 mm diameter to improve process stability and cycle time; order the tool directly via Metav Werkzeuge or consult our specialists for application-specific advice. Corner turning head (for BOMT 1304 Indexable Inserts) T965-2TM — 40 mm, internal coolant — Teknik Makina The Corner turning head is a compact, coolant-fed tool head intended for square-shoulder turning and profiling with BOMT 1304 indexable inserts in CNC turning centres and toolroom lathes. 40 mm diameter for compact set-ups Internal coolant for controlled chip evacuation Compatible with BOMT 1304 indexable inserts 90° cutting angle for square-shoulder machining Reliable square-shoulder performance with coolant support The compact design and 40 mm diameter create a low-overhang holder that reduces vibration and improves surface finish during shoulder cuts. The integrated internal coolant supply directs cutting fluid to the insert seat, slowing thermal build-up and enabling longer, more consistent cutting performance. This stabilising effect is particularly relevant for medium-duty turning operations where repeatable tolerances and surface integrity are required. The tool head delivers a predictable machining environment, supporting higher first-pass yields and fewer rework cycles. Secure clamping and service-friendly fastenings Designed for a secure interface, the head features a 16 mm mounting diameter and a dedicated fastening system using Torx T10 and M3.5x8.5 screws for positive clamping. The robust connection reduces micro-movement between holder and spindle, translating into consistent tool geometry and repeatable results. Replacement of worn or damaged BOMT 1304 inserts is straightforward thanks to the indexed insert design; insert changes are rapid and require only the listed Torx key, keeping downtime to a minimum and maintenance procedures simple to train. Compatibility, tool life and process efficiency Compatibility with BOMT 1304 indexable inserts and recognised insert manufacturers (Ingersoll compatibility indicated) gives flexibility in selecting grades and geometries for steel, alloyed materials and general shop applications. The 90° cutting angle makes the head ideal for shoulder milling and turning where square corners are required, while the internal coolant reduces built-up edge formation and extends insert life. Together, these features support an improved cost-per-component metric in production runs and a measurable reduction in tool-change frequency. Practical applications and workshop suitability The tool head is suited to job shops, subcontract manufacturers and production lines requiring compact, coolant-fed turning solutions. With a lightweight design (approx. 0.272 kg) and a 40 mm overall length, it fits tight tooling envelopes and reduces centrifugal loads at speed. The holder is recommended where consistent shoulder geometry and process repeatability are priorities; its straightforward mechanical interface simplifies inventory management and standardises holders across compatible turning programmes. For application guidance or to source compatible inserts and accessories, contact Metav Werkzeuge for personalised advice and supply from Emmerich. Technical data SKU: T965-2TM Name: Corner turning head for BOMT 1304 indexable inserts Manufacturer: Teknik Cutting Tools (Teknik Makina) ECLASS: 21181015 Core data Diameter: 40 mm Overall length: 40 mm Weight: 0.272 kg Mounting diameter: 16 mm Cutting angle: 90° Number of cutting positions: 5 Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant: yes Compatible inserts: BOMT 1304 Compatible insert manufacturer: Ingersoll Product type: Corner turning head SKU: T965-2TM FAQ How does the internal coolant improve machining with this head? Internal coolant directs cutting fluid to the insert seat and cutting zone, reducing thermal stress and chip adhesion; the Corner turning head with internal coolant helps prolong insert life and stabilise surface finish. Which inserts fit this tool head? This holder is designed for BOMT 1304 indexable inserts and is compatible with inserts from the listed manufacturers such as Ingersoll, enabling selection of grades tailored to the workpiece material. What are the mounting and fastening details? The holder uses a 16 mm mounting diameter and secures with Torx T10 fastenings and M3.5x8.5 screws for positive clamping and straightforward maintenance. Is the tool suitable for heavy interruption or roughing cuts? The head is optimised for square-shoulder turning and profiling with a 90° cutting angle; while capable in many shop applications, selection of insert grade and cutting parameters should match the intended roughing or finishing task. What is the SKU and who manufactures the tool? The SKU is T965-2TM and the tool is manufactured by Teknik Cutting Tools (Teknik Makina). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine a compact 40 mm footprint with internal coolant and a precise 90° cutting angle to increase machining stability and extend insert life — ideal for short overhangs and repeatable corner operations. Order the corner cutting head directly via Metav Werkzeuge or ask our consultants if needed. Corner cutting head T488-1TM – 40 mm diameter, internal coolant, for LNGX 1307 Indexable Inserts (Teknik Makina) A corner cutting head engineered for precision indexable-insert machining with LNGX 1307 inserts, optimised for compact toolholders and coolant-through operation. 40 mm diameter for compact operations Internal coolant for improved chip evacuation Compatible with LNGX 1307 Walter inserts 90° cutting angle with three cutting edges Precision where corner cuts matter The compact tool head provides a stable platform for repeatable corner cuts thanks to its 40 mm diameter and a short overall length of 45 mm. The combination of a rigid geometry and a defined 90° cutting angle reduces deflection and vibration, which directly improves surface finish and dimensional repeatability. Designed for use with LNGX 1307 indexable inserts, the head offers consistent seat positioning so that insert indexing remains accurate cycle after cycle. These factors translate into measurable productivity gains on small to medium workpieces where precision and stability are essential. Coolant-through design to protect inserts and workpieces Integrated internal coolant channels deliver cutting fluid directly to the insert seat and cutting edge, promoting efficient chip removal and localised cooling. Because heat is expelled close to the cutting zone, insert wear is reduced and machining parameters can often be pushed without compromising tool life. The direct coolant feed is particularly beneficial when machining interrupted cuts or when chip evacuation is critical; the result is fewer rework cycles and longer uninterrupted production runs. This feature supports higher process reliability in mixed-batch environments. Secure clamping and quick serviceability Service and changeover are simplified by a robust fastening system: a M4x11 Torx screw secured with a T15 key ensures reliable clamping and repeatable seating of the insert. The head accepts three cutting edges, allowing multiple index positions before replacement, which reduces downtime and inventory pressure. The shorter overhang (overall length 45 mm with a 16 mm shank) improves stiffness and makes the head suitable for compact toolholders where accessibility and clearance are limited. Maintenance routines become faster and more predictable with this straightforward fixing concept. Practical benefits for workshops and production lines This cutting head is a fit-for-purpose option where compactness and coolant capability are required together with compatibility to established insert systems from Walter. The T488-1TM delivers a balance of rigidity, cooling efficiency and simple handling that supports lean workflows and reduces tool-change frequency. For buyers seeking to consolidate tooling, the head’s standard interface and familiar Torx fastening facilitate integration into existing setups. For complex applications or non-standard toolholders, Metav’s specialists can provide guidance on suitable adapters and mounting strategies. For purchase enquiries or technical clarification on the Teknik Makina T488-1TM corner cutting head — including compatibility with existing holders and recommended operating parameters — contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and ordering support. Technical data SKU: T488-1TM Product type: Corner cutting head Item label: 40mm Eckmesserkopf LNGX 1307 L45mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21181015 Core technical data Diameter: 40 mm Overall length: 45 mm Shank diameter: 16 mm Weight: 0.304 kg Number of cutting edges: 3 Cutting angle: 90° Materials & special features Internal coolant: yes Compatible inserts: LNGX 1307 Compatible insert manufacturer: Walter Torx key: T15 Torx screw: M4x11 FAQ Which inserts fit this head? The corner cutting head accepts LNGX 1307 indexable inserts; compatibility is specified for inserts from Walter. Is the coolant routed through the head? Yes — the toolhead features internal coolant, supplying cutting fluid directly to the insert seat for improved chip evacuation and cooling. What shank size is required for mounting? The head is supplied with a 16 mm shank diameter and a short overall length of 45 mm, suitable for compact toolholders. How is the insert secured? Inserts are fixed with a M4x11 Torx screw using a T15 key, providing secure clamping and repeatable seating. Is this head suitable for long overhangs? The design prioritises rigidity with a compact footprint (40 mm diameter, 45 mm overall length); for long overhangs, a more extended toolholder may be necessary. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, coolant-fed design and precise compatibility with R390 11 indexable inserts to improve cycle consistency and tool life; order the component through Metav Werkzeuge or contact our advisors for application support. Corner tool head for R390 11 indexable inserts — 40 mm, internal coolant (Teknik Makina) The corner tool head for R390 11 indexable inserts delivers a compact, coolant-assisted solution for precision turning and facing operations in industrial workshops. 40 mm diameter for compact installations Integrated internal coolant for effective cooling Compatible with R390 11 Sandvik indexable inserts Secure Torx fastening for repeatable clamping Consistent cooling and longer tool life for uninterrupted production The compact head is engineered around a 40 mm envelope and internal coolant, providing targeted lubrication directly at the cutting zone. This combination reduces tool temperature, diminishes built-up edge and improves chip control — concrete benefits for cycle stability and tool life in repetitive turning tasks. Compatibility with R390 11 indexable inserts means established insert geometries and grades can be used, allowing predictable cutting data and easier inventory management. The result is fewer unscheduled stoppages and a more consistent output quality across batches. Fast insert changes and reliable clamping for reduced downtime A deliberate design focus on serviceability means insert changes remain quick and repeatable. The head uses a Torx T8 drive and M2.5x7 Torx screw for secure retention, ensuring a consistent clamping interface and minimal setup variation between tool changes. With five cutting edges and a 90° cutting orientation, the component supports robust engagement and straightforward indexing strategies. For workshops that measure productivity in minutes saved per changeover, this combination reduces operator time and increases effective machining uptime. Built for workshop supply chains that require traceability and fit At just 0.225 kg and an overall length of 40 mm, the tool head is light and compact without compromising rigidity. Manufactured by Teknik Makina and matched for Sandvik insert systems, it suits environments where standardisation and interchangeability are priorities. The compact mass lowers centrifugal loads at higher spindle speeds, while the standardised insert fit keeps stocking and procurement simple. If the application is precision external turning, profiling or face finishing, the head offers a dependable, repeatable option that integrates into established tooling systems. For specification checks or a tailored recommendation for Teknik Makina turning heads, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request a technical datasheet and delivery options. Technical data SKU: T577-1TM Manufacturer: Teknik Makina eClass: 21181015 Facts Diameter: 40 mm Overall length: 40 mm Weight: 0.225 kg Number of cutting edges: 5 Cutting angle: 90° Torx key: T8 Torx screw: M2.5x7 Internal coolant: yes Special features Compatible with R390 11 indexable inserts Matched for Sandvik insert geometry Compact, rigid design for shop-floor use Designed for precision turning and facing FAQ Which insert types fit this tool head? The head is designed to accept R390 11 indexable inserts and is specified for Sandvik-compatible insert geometries. Is internal coolant available on the tool head? Yes, the component features internal coolant to deliver cutting fluid directly to the cutting edge for improved cooling and chip control. What is the fastening method for the insert? Insert retention uses a Torx T8 drive with an M2.5x7 Torx screw for secure and repeatable clamping. Can the head be used for profiling and external turning? The head’s 90° cutting orientation and compact design make it suitable for both external turning and face profiling tasks where standard R390 11 inserts are applicable. Who supplies the tool head and where can it be ordered? The head is produced by Teknik Makina (SKU T577-1TM) and can be procured via Metav Werkzeuge for immediate consultation and supply. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise turning performance and reduced downtime thanks to the combination of VCGT 1604 compatibility and internal coolant; the robust 90° cutting angle and Torx clamping enable rapid insert changes and consistent component quality. Order the tool directly via Metav Werkzeuge or request consultancy for application matching. Eckmesserkopf – 40 mm corner cutting head for VCGT 1604 with internal coolant (Teknik Makina) The Eckmesserkopf is an angled indexable insert head designed for finishing and shoulder turning with VCGT 1604 inserts, offering a compact 40 mm diameter and internal coolant for improved tool life. 40 mm cutting head diameter Compatible with VCGT 1604 inserts Internal coolant for improved tool life Torx M4x10 clamping with T15 key Stable geometry for predictable turning results The tool head’s 90° cutting angle and compact 40 mm diameter provide a stable cutting geometry that supports consistent shoulder and profile work. Combined with the three cutting edges, the configuration delivers balanced loads during entry and exit cuts, which reduces vibration and enhances surface finish. The short L52 mm overhang helps maintain rigidity at the tool tip, translating into repeatable results on small to medium components while maintaining dimensional accuracy. Faster service intervals and extended insert life Integrated internal coolant supplies lubricant and cooling directly to the cutting zone, lowering temperatures and improving chip control at the insert corner. The result is extended insert life and fewer unscheduled tool changes, which raises net productivity on batch runs. Secure clamping via an M4x10 Torx screw and a T15 key enables quick insert replacement without specialised fixtures, reducing maintenance time and simplifying routine tool servicing. Workshop-ready design for efficient integration The indexable head’s moderate weight of 0.277 kg and compact dimensions make it simple to integrate into standard tool holders and turret systems. Compatibility with widely used VCGT 1604 inserts ensures broad material coverage when paired with the appropriate insert grades, while the proven mechanical clamping design maintains positional accuracy across repeated indexings. The robust construction supports consistent performance in production environments that require dependable turning solutions. Contact Metav Werkzeuge for tailored application advice on Teknik Makina turning heads and secure reliable supply from our Emmerich facility — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T498-1TM Brand: Teknik Makina Product type: Corner cutting head Facts Diameter: 40 mm Total length: 52 mm Weight: 0.277 kg Cutting edges: 3 Special features Compatible inserts: VCGT 1604 Cutting angle: 90° Internal coolant: yes Torx screw: M4x10 Torx key: T15 FAQ Which insert type fits this head? The Eckmesserkopf accepts VCGT 1604 indexable inserts; Teknik Makina specifies this compatibility for reliable seating and cutting geometry (SKU T498-1TM). Does the head provide internal coolant? Yes — the corner cutting head features internal coolant to supply lubricant and cooling directly to the cutting zone, improving insert life and finish. What are the clamping details for the insert? Clamping is effected with an M4x10 Torx screw; a T15 key is used for tightening and insert changes on the Teknik Makina head (T498-1TM). What are the key dimensions to consider for turret integration? Key dimensions are 40 mm diameter and 52 mm total length, with a tool weight of 0.277 kg, suitable for compact setups and standard turrets. How many cutting edges does the tool head support? The head is configured with 3 cutting edges, providing stable engagement for shoulder and profile turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com