Gibt es einen Hahn und Kolb Online Shop?

Take advantage of precise slot geometry and robust clamping for reliable fixture creation; the combination of a 35 mm diameter cutting head and a 20 mm shank delivers stable machining with reduced run-out. Order the tool directly via Metav Werkzeuge or consult our specialists if further specification is required. T-slot cutter TKC295TM — 35 mm diameter, 120 mm overall length (Teknik Makina) The T-slot cutter TKC295TM is a purpose-built T-slot milling cutter for producing standard T-slots in machine tables, fixture plates and modular tooling systems. 35 mm diameter for standard T-slots 120 mm overall length for deeper reach Shank Ø 20 mm for secure clamping Korloy-compatible indexable inserts Reliable T-slot machining for secure fixturing A cutter suited to demanding jigs and fixtures needs consistent geometry; this T-slot milling cutter provides exactly that through its 35 mm diameter and precise cutting geometry. The two-flute design with 2 cutting edges and a 2 mm cutting edge height balances chip evacuation and surface finish: fewer flutes ease chip clearance in slotting operations, while the measured edge height defines the finished slot profile. For production-oriented environments, this combination reduces rework and helps maintain positional accuracy of clamped components, so alignment of tooling and workpieces remains repeatable across long runs. Stability, clamping and long-reach capability Longer reach operations demand a rigid connection between tool and spindle; the Shank Ø 20 mm and 120 mm overall length are specified to keep deflection low while still allowing access to deeper table slots. The insert clamping system is designed around a 6 mm Allen key interface, ensuring reliable seating of the cutting insert and fast clamp action during maintenance. Reduced run-out from a correctly sized shank and robust clamping improves tool life and delivers a consistent surface on the slot faces, which is particularly important where precision fixturing and repeatable component seating are required. Korloy compatibility and efficient workshop workflows The cutter accepts Korloy-compatible inserts, offering the advantages of a widely available indexable system: quick insert replacement, predictable cutting performance and the option to select grades appropriate to the workpiece. Compatibility with standard inserts simplifies inventory and shortens downtime when regrinding or replacement is needed. For production planners and workshop managers, the result is a pragmatic mix of performance and serviceability — a tool that supports continuous operation and reduces the need for specialised reconditioning. For dependable T-slot production choose the Teknik Makina TKC295TM and contact Metav Werkzeuge for availability and application guidance — Metav Werkzeuge can advise on suitable insert grades and holder requirements to match individual machining needs. Technical data Article number: TKC295TM Product: T-slot cutter Label: 35mm T-Nut Fräser L120mm Manufacturer: Teknik Makina eClass: 21180605 Core dimensions Diameter: 35 mm Overall length: 120 mm Shank diameter: 20 mm Cutting edges: 2 Cutting edge height: 2 mm Features & compatibility Korloy-compatible inserts 6 mm Allen key clamping SKU: TKC295TM Product type: T-slot cutter FAQ What slot size is this cutter intended to produce? The cutter is designed to machine T-slots corresponding to a 35 mm diameter head, which defines the standard slot profile for fixture and table applications when used with the correct insert geometry. What shank and holder are required for stable machining? A tool holder or collet suitable for a 20 mm shank is required; using a correctly matched holder for the TKC295TM ensures minimal run-out and consistent finish. How are the inserts secured and changed? Insert clamping is performed with a 6 mm Allen key interface; the system used on the TKC295TM provides secure seating and straightforward insert replacement to keep downtime low. Which insert brand is compatible with this cutter? The cutter accepts Korloy-compatible inserts, allowing the use of readily available grades for a range of workpiece materials and cutting conditions. How many cutting edges does the tool have and why does that matter? The tool features 2 cutting edges; this two-flute arrangement improves chip evacuation in slotting operations and typically yields a good balance between material removal rate and surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust stability and insert compatibility for consistent T-slot machining — the combination of a solid 25 mm shank, a 35 mm cutting diameter and compatibility with CCMT 09T3 indexable inserts supports efficient production cycles and repeatable slot geometry. Order the cutter directly via Metav Werkzeuge or request application advice from their consultants. T-slot cutter TKC104TM by Teknik Makina — 35 mm, 4 cutting edges The T-slot cutter TKC104TM is a precision milling tool for creating accurate T-slots using indexable inserts; engineered for stable clamping and repeatable results in CNC milling applications 35 mm cutting diameter Solid 25 mm shank Compatible with CCMT 09T3 inserts Four cutting edges for smooth cuts Stable support for precision T-slot production The tool is built around a 25 mm shank that increases rigidity during machining, which directly reduces vibration and improves repeatability when producing T-slots. A stable holder translates into more consistent slot geometries and reduced rework, so machining cycles remain predictable. Combining a robust shank with a 100 mm overall length balances reach and stiffness, permitting access into typical workpieces without compromising stability. The reduced runout achieved by a correctly matched holder supports longer insert life and steadier surface quality. Efficient indexable-insert system for predictable throughput This cutter accepts CCMT 09T3 indexable inserts, enabling quick insert changes and consistent cutting performance across production batches. With four cutting edges, each cutting pass distributes load evenly and helps maintain uniform chip formation, which improves cycle times and tool life compared with single-edge solutions. The design supports predictable maintenance planning: inserts can be rotated or replaced without removing the cutter from the spindle, so downtime is minimised and machining cells remain productive. The cutter’s geometry is tuned for stable chip evacuation and steady feedrates on conventional milling strategies. Setup guidance and longevity-focused maintenance Key dimensions such as the 35 mm diameter, cutting height 15 mm and the 52 mm shank cutting length allow straightforward integration into existing tool lists and fixture setups. Selecting the correct clamping and advising on torque for the securing screw (Torx M3.5x9) ensures secure mounting and reduces the likelihood of assembly-induced runout. Regular inspection of insert seating and adherence to recommended feed per tooth will safeguard surface finish and prolong service intervals. For workshops seeking a balance of accessibility and precision, this cutter is a practical choice that supports steady production rhythms while maintaining component tolerances. For production environments requiring reliable T-slot milling, contact Metav Werkzeuge for technical clarification or to order the Teknik Makina TKC104TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange specification support and delivery Technical data SKU: TKC104TM Manufacturer: Teknik Makina Designation: T-slot cutter Key dimensions Cutting diameter: 35 mm Overall length: 100 mm Shank diameter: 25 mm Shank cutting length: 52 mm Cutting-part diameter: 14 mm Cutting height: 15 mm Number of cutting edges: 4 Weight: 0.447 kg Features & compatibility For indexable inserts: CCMT 09T3 Torx screw: M3.5x9 Torx key size: T15 Intended for T-slot milling on milling centres FAQ Which insert type is required for this cutter? The TKC104TM uses CCMT 09T3 indexable inserts, providing fast replacement and consistent cutting geometry. What is the shank diameter and is it suitable for standard holders? Shank diameter is 25 mm; the straight shank suits common collet and toolholder systems that accept this diameter. How many cutting edges does the cutter have and what is the benefit? The cutter features four cutting edges, which balance load distribution and improve chip evacuation for smoother slot walls. What are the key dimensions to consider when setting up the tool? Relevant dimensions include a 35 mm cutting diameter, 100 mm overall length and cutting height of 15 mm for correct fixture and depth planning. Is a specific screw or key required for assembly? A securing screw of specification M3.5x9 (Torx) and a T15 key are noted for the tool’s clamping hardware. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the precise 36–56 mm clamping range and compatibility with CCMT 0602 inserts to reduce setup time and improve bore accuracy. The secure Torx T8 fastening with M2.5x5.5 screws delivers consistent repeatability under production conditions. Order the cartridge directly via Metav Werkzeuge or consult their specialists for tailored application support. Cartridge THB07TM (Kartusche) — 36–56 mm cartridge for boring tool set by Teknik Makina A Cartridge for modular boring tool sets, designed to secure indexable inserts for precise internal turning and adaptable bore diameters. Fitted for boring tool sets 36–56 mm range Compatible with CCMT 0602 indexable inserts Torx T8 screw and M2.5x5.5 fastening Robust component from Teknik Makina Faster set-up and reliable bore results The compact holder is built to simplify internal turning operations: the adjustable 36–56 mm clamping range removes the need for multiple fixed adapters, while compatibility with CCMT 0602 indexable inserts keeps tooling costs predictable. By standardising on a single, adaptable holder, machine time is maximised and changeover procedures are shortened. The combination of a defined insert fit and consistent clamping geometry supports repeatable bore diameters with fewer adjustments, contributing directly to improved process efficiency. Secure fastening for repeatability in production A robust fastening system using a Torx T8 driver and M2.5x5.5 screws ensures a reliable mechanical connection between the holder and the cutting insert. This configuration reduces the risk of loosening under load and minimises micro-movements that can affect finish and tolerance. The mechanical design emphasises precision and vibration resistance, attributes that matter in medium- to high-volume runs where consistent part quality and reduced rework translate into clear time and cost savings. Seamless integration with existing tooling systems The cartridge is intended for direct use within standard boring tool sets, enabling straightforward replacement or upgrade of existing tool holders. Marked under SKU THB07TM, the component was conceived for easy integration and clear identification in workshop inventories. Its compatibility with widely used insert geometries simplifies procurement and stock management for production teams. For workshops seeking to increase flexibility without extensive retooling, this holder offers a pragmatic route to improved internal turning capability. For secure, precise internal boring choose the Teknik Makina cartridge and contact Metav Werkzeuge in Emmerich for application advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: THB07TM Name: Kartusche EN designation: 36-56mm for Boring Tool Manufacturer: Teknik Makina Facts Compatible inserts: CCMT 0602 Torx key: T8 Torx screw: M2.5x5.5 ECLASS: 21041590 Special features For boring tool set SKU: THB07TM Story trigger: ausdrehwerkzeug FAQ What insert size does the cartridge accept? The cartridge accepts CCMT 0602 indexable inserts, which are specified for the holder to ensure correct seating and cutting geometry. Which clamping range is covered by this holder? The holder is designed for a clamping range of 36–56 mm, making it suitable for a range of internal bores within that span. What fastening hardware is required for installation? Installation uses a Torx T8 driver and M2.5x5.5 screws as supplied for secure mounting of the insert and holder. Is this component compatible with existing boring tool sets? Yes, the cartridge is intended for modular boring tool sets and is identified under SKU THB07TM for straightforward replacement and inventory control. Who manufactures this cartridge? The cartridge is produced by Teknik Makina and is supplied for workshop use where reliable internal turning and repeatability are required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a robust 36 mm diameter, an extended 144 mm cutting length and a secure 32 mm shank for repeatable holemaking and stable toolholding; order the indexable drill body directly via Metav Werkzeuge or consult our specialists for machining advice. Indexable drill body U736TM – 36 mm diameter, 32 mm shank (Teknik Makina) The Indexable drill body U736TM is engineered for industrial machining where long reach and stable clamping are required, offering precise, repeatable drilling with indexable inserts in production environments 36 mm diameter for stable drilling 144 mm cutting length for extended reach 32 mm shank for secure clamping Compatible with SPMG 1104 inserts (Taegutec, YG-1) Consistent hole quality through rigid design The U736TM combines a 36 mm nominal diameter with a substantial 32 mm shank, delivering the rigidity required for accurate centre-to-centre positioning and uniform hole geometry. With a 144 mm cutting length the body allows deeper engagement without compromising stability; this reduces the need for multiple set-ups and maintains concentricity over longer passes. The use of indexable inserts means the cutting edge geometry is standardised: an SPMG 1104 insert provides a defined cutting corner and chip control, which translates technical insert geometry into reliably consistent bore finishes for production runs. Reduced downtime and straightforward maintenance Changing a worn edge is limited to replacing the insert, not the whole tool body, which improves uptime and lowers running costs. Compatibility with major insert suppliers Taegutec and YG-1 increases procurement flexibility and shortens lead times for replacements. The modular concept converts insert swaps into routine maintenance tasks, helping to keep cycle times predictable and inventory lean. Overall, the tool body’s dimensions and insert system support an efficient workflow in batch and continuous production where repeatability and quick serviceability matter. Built for industrial workshop and CNC environments With an overall length of 239 mm and a shank length of 58 mm, the U736TM is dimensioned for secure clamping in standard holders while providing the reach required for deeper bores. The tool’s mass of 1.185 kg contributes to steadiness during cutting without excessive vibration, improving surface quality and tool life. Manufactured by Teknik Makina, the construction emphasises robust interfaces and manufacturing tolerances compatible with CNC drilling applications. Where machining reliability is essential, the tool body offers a predictable mechanical basis for process planning and fixture design. Contact Metav Werkzeuge today to discuss how Teknik Makina’s U736TM indexable drill body can be integrated into current machining processes; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply options. Technical data Article number: U736TM Manufacturer: Teknik Makina Name: Vollbohrer Core measurements Diameter: 36 mm Cutting length: 144 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 239 mm Weight: 1.185 kg Compatibility and features Insert type: SPMG 1104 Compatible insert manufacturers: Taegutec, YG-1 Shank interface: 32 mm FAQ What insert type is required for this drill body? The drill body accepts SPMG 1104 indexable inserts; Tek­­nik Makina’s U736TM is specified for that insert geometry and is compatible with suppliers such as Taegutec and YG-1. Which dimensions determine the drilling reach and clamping requirements? Key dimensions are the 144 mm cutting length for effective reach and the 32 mm shank with a 58 mm shank length for secure clamping; the overall length is 239 mm. Is the tool suitable for CNC drilling operations? The U736TM is designed for industrial machining and CNC environments where a rigid shank and extended cutting length are required to maintain process stability. How does using indexable inserts benefit production? Indexable inserts reduce downtime because only the insert is replaced when worn, offering consistent cutting geometry and easier inventory management, especially when compatible inserts are available from multiple manufacturers. What are the handling characteristics of the tool body? At 1.185 kg, the tool body balances rigidity and manageability, contributing to reduced vibration and improved hole quality in standard production set-ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, simple insert replacement and dependable compatibility for consistent, economical drilling cycles; order the tool directly via Metav Werkzeuge or consult our specialists for tailored application advice. Drill bar STI for IR/ER Indexable Inserts — S32T STIR, 32 mm shank (Teknik Makina) A drill bar STI for IR/ER indexable inserts engineered for right-hand cutting, designed to accept 16 IR inserts and provide reliable medium-reach drilling. Right-hand cutting direction 32 mm shank diameter Compatible with 16 IR indexable inserts 300 mm overall length Stable clamping and consistent hole quality The S32T STIR design centres on secure toolholding and repeatable results. With a 32 mm shank and a solid overall length of 300 mm, the bar delivers enhanced rigidity compared with smaller shanks, which reduces vibration and improves hole straightness. The STI style interface paired with the specified clamping holder reference IR16 ensures reliable seating of the insert, lowering the risk of movement during interrupted cuts and prolonging tool life. Economy through indexable inserts and accessible maintenance Indexable inserts make wear predictable and maintenance fast: when the cutting edge is spent, only the insert is replaced rather than the entire tool body. The bar accepts 16 IR inserts and offers a 60 mm cutting height, allowing multiple effective cutting edges per insert to be used before replacement. This approach reduces downtime and keeps consumable costs controllable, delivering a clear efficiency gain on batch and serial work. Purpose, compatibility and workshop benefits Suited to workshops and production environments that require reliable, repeatable drilling with indexable tooling, the bar’s 36 mm diameter working interface and right-hand cutting orientation make it straightforward to integrate into existing setups that use IR/ER insert systems. At a weight of 1.829 kg, the component has the mass for stable cutting without being unwieldy for routine handling. Supplied under SKU K358TM, the tool is a practical choice where fast insert changes and predictable performance are priorities. Why choose a Metav-supplied solution Metav Werkzeuge positions itself as a precision partner that brings professional tooling and accessible service to European workshops. With a comprehensive range and a long-standing customer base, procurement via Metav ensures consistent availability and an experienced advisory route for selecting the correct bar and inserts for specific materials and depths of cut. The combination of a standardized STI interface and widely used IR/ER inserts supports straightforward inventory management and faster process planning. For application-specific guidance or to order the S32T STIR drill bar from Teknik Cutting Tools via Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and lead times. Technical Data Article number: K358TM ISO designation: S32T STIR Product name: STI for IR/ER Indexable Inserts Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Diameter: 36 mm Weight: 1.829 kg Special features Compatible with 16 IR indexable inserts Clamping holder designation: IR16 Cutting direction: right FAQ What insert type fits this drill bar? The bar accepts 16 IR indexable inserts; the STI interface is compatible with IR/ER insert systems specified for this tool. What are the key dimensions to check before ordering? Check the 32 mm shank diameter, 300 mm overall length and the tool’s 36 mm working interface to ensure compatibility with the machine and holder. Is the cutting direction important for setup? Yes, the tool is specified for right-hand cutting, so machine spindle direction and fixture orientation must match for correct chip flow. Which SKU identifies this item for ordering? Order using SKU K358TM; the ISO designation S32T STIR can also be quoted for clarity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of rigidity and reach for reliable turning operations: the S32T STIR design with a shaft Ø 32 mm ensures stable cutting, while the 300 mm overall length provides access to deeper bores; order directly via Metav Werkzeuge or consult their specialists for matching inserts and fast supply. Boring Bar K360TM — S32T STIR boring bar for IR/ER indexable inserts, Shaft Ø 32 mm, 300 mm length (Teknik Makina) A durable Boring Bar K360TM engineered for right-hand turning, intended for external and semi-deep internal boring with STI-compatible IR/ER indexable inserts Shaft Ø 32 mm for stable cutting Overall length 300 mm for extended reach Compatible with 22 IR indexable inserts Right-hand cutting orientation Improved stiffness for consistent surface quality The S32T STIR configuration is designed to reduce vibration and improve tool stability; the shaft Ø 32 mm increases bending resistance compared with smaller shanks, which directly contributes to a finer surface finish and longer insert life. In practice, enhanced rigidity means fewer scrap parts and reduced rework, so machining tolerances are met more reliably. The ISO designation S32T STIR identifies a standardised mounting and geometry that supports predictable cutting behaviour in repetitive production runs. Reach that keeps set-ups simple and flexible With a 300 mm overall length and a cutting height of 60 mm, this tool provides the reach necessary for medium-depth bores while maintaining usable stiffness. Longer reach reduces the need for interim extensions or secondary setups, shortening process time for multi-step operations. The geometry is suitable for situations where accessibility is required without sacrificing control, enabling a balance between accessibility and machining stability for workshop and production environments. Standardised insert system for fast changeover Designed for IR/ER indexable inserts and specified for size 22 IR, the bar accepts commonly used insert formats, simplifying inventory and cutting-edge replacement. The clamping reference IR22 ensures compatibility with established holders and reduces downtime during insert changes. This standardisation supports cost-effectiveness: replacement inserts are widely available and can be changed quickly, leading to higher machine utilisation and predictable maintenance cycles. Robust build for dependable workshop performance Weighing 1.818 kg and specified with an outer diameter of 36 mm where applicable, the bar is dimensioned for stable handling in everyday machining. The right-hand cutting orientation is suited to conventional lathe set-ups and aligns with common toolpaths in turning centres. The combination of a substantial shaft, standard insert system and S32T STIR mounting supports long-term reliability and consistent output — qualities that contribute to lower total cost of ownership for production and maintenance teams. For precise matching of insert grades and clamping options for the S32T STIR boring bar, contact Metav Werkzeuge for tailored advice and prompt delivery from Emmerich; their consultants can recommend the optimal 22 IR inserts and holders to suit the application Technical data Article number: K360TM Manufacturer: Teknik Makina ISO designation: S32T STIR Dimensions and measurable data Overall length: 300 mm Shaft diameter: 32 mm Outer diameter: 36 mm Cutting height: 60 mm Weight: 1.818 kg Cutting direction: Right Compatibility / special features For indexable inserts: STI for IR/ER Suitable insert size: 22 IR Clamping holder reference: IR22 FAQ Which insert types fit this boring bar? The bar is specified for IR/ER indexable inserts and is dimensioned for size 22 IR, allowing use of standard STI-compatible inserts. What does the ISO designation S32T STIR indicate? S32T STIR denotes the bar's shank and mounting geometry; the designation identifies a standardised interface and cutting profile for consistent assembly and performance. Is the cutting orientation right-hand or left-hand? This tool is designed for right-hand cutting operations. How long is the tool and what reach does it provide? The overall length is 300 mm, giving extended reach for medium-depth bores while retaining usable rigidity. Which clamping holder corresponds to this bar? The clamping holder reference is IR22, matching the specified insert size and ensuring proper engagement and retention. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable drill body offering a Ø36 mm hole diameter and 72 mm cutting length for extended reach and repeatable performance; compatible with Korloy WCM-06T3 inserts for low-cost reconditioning. Order or request advice via Metav Werkzeuge for reliable supply and application support. Vollbohrer U138TM – Indexable drill body Ø36 mm, 72 mm cutting length (Teknik Makina) Vollbohrer U138TM is a precision indexable drill body intended for insert-based drilling operations where repeatable hole quality and economical insert replacement are required Indexable drill body for WCM-06T3 inserts Diameter Ø36 mm for medium holes Cutting length 72 mm for deeper reach 32 mm shank, 58 mm shank length Consistent performance for demanding holemaking The tool body delivers consistent hole diameter and a stable cutting geometry that reduces the need for frequent re‑adjustment. With a Ø36 mm nominal diameter and 72 mm cutting length, this indexable solution supports longer machining cycles without compromising concentricity. The design focuses on rigidity and repeatability, which helps to lower scrap rates and stabilise cycle times in production environments that demand predictability rather than ad‑hoc adjustments. Economical reconditioning and compatibility explained Designed to accept Korloy inserts of type WCM-06T3, the drill body allows quick insert changes instead of replacing the entire tool, reducing lifecycle costs and downtime. The 32 mm shank and 58 mm shank length ensure secure clamping in common toolholders, while the modular insert system enables straightforward replacement and consistent cutting conditions. This approach combines high initial stability with predictable running costs, making it suitable for batch production where tool maintenance must be efficient. Workshop benefits and supply reliability At roughly 0.97 kg, the component is substantial enough to ensure stable cutting yet compact for standard tool‑handling procedures. The overall length of 167 mm and the clearly defined cutting and shank lengths facilitate setup planning and tool‑offset programming on CNC equipment. Supplied by Teknik Makina and distributed through Metav, the offering is backed by a centralized European logistics and quality filter that supports dependable replenishment and traceable sourcing for workshops and manufacturing facilities. Contact Metav Werkzeuge to discuss Teknik Makina indexable drill bodies, confirm insert compatibility and secure delivery from Emmerich with direct application advice Technical data Article number: U138TM Manufacturer: Teknik Makina Product name: Vollbohrer Compatible insert type: WCM-06T3 Compatible insert brand: Korloy Numbers / Core technical data Diameter: 36 mm Overall length: 167 mm Cutting length: 72 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.97 kg Design / Special features Indexable drill body Insert compatibility: Korloy WCM-06T3 SKU: U138TM FAQ What insert type does this drill body use? The drill body accepts Korloy WCM-06T3 inserts; Teknik Makina’s design U138TM is configured for quick insert replacement to maintain consistent cutting conditions. Is the shank suitable for standard toolholders? Yes, the 32 mm shank and 58 mm shank length of the U138TM align with common clamping options used in CNC toolholders for secure mounting. What hole depth can be achieved reliably? With a 72 mm cutting length and overall length of 167 mm, the tool supports medium‑deep drilling tasks with repeatable geometry when operated within recommended machining parameters. Who supplies and distributes this tool in Europe? Teknik Makina manufactures the item (SKU U138TM); distribution and application support are offered by Metav Werkzeuge through their Emmerich logistics and service network. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable insert compatibility, a robust 32 mm shank and a 72 mm cutting length for steady production drilling; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina indexable insert drill U936TM — 36 mm diameter, compatible with SPMG 1104 inserts A Teknik Makina indexable insert drill designed for industrial metal-cutting tasks, suited to production runs where repeatable hole quality and cost-effective insert changes matter 36 mm cutting diameter 72 mm cutting length 32 mm shank diameter Compatible with SPMG 1104 inserts Consistent hole quality for serial production The U936TM is engineered to deliver repeatable, accurate holes across multiple cycles. With a 36 mm nominal diameter and a 72 mm cutting length, the tool provides a stable contact area that reduces wandering and maintains tolerance control in batch work. The 32 mm shank ensures secure mounting and minimises runout when clamped in collets or holders with the correct bore. For users less familiar with indexable tooling, replaceable cutting edges mean that geometric accuracy is restored simply by indexing or replacing the insert, rather than regrinding a whole tool — a clear advantage for workshops and production lines seeking predictable results and reduced downtime. Cost efficiency through replaceable inserts Equipped for SPMG 1104 inserts and compatible with insert suppliers Taegutec and YG-1, this drill body converts machining costs into predictable maintenance cycles. The use of indexable inserts makes it possible to restore cutting performance quickly and at lower cost than replacing solid drills. In practice, the modular concept reduces tool inventory complexity: only the worn insert is exchanged while the drill body remains in service, improving overall tool life economy. This configuration is particularly effective where workpieces require intermittent reconditioning or when a variety of grades from different manufacturers are preferred to match specific workpiece materials. Robust design that integrates into existing setups A total length of 167 mm combined with a shank length of 58 mm gives the tool the physical dimensions needed for many common holder systems. The body mass (approx. 0.893 kg) contributes to vibration damping during cutting, supporting a smoother surface finish and longer insert life. The construction is suited to standard machining centres and toolholders used in metalworking; compatibility with common insert types simplifies procurement and replacement. For engineers evaluating feeds and speeds, the indexed-cutting approach allows straightforward optimisation: adjust cutting parameters for the insert grade and material rather than the entire tool geometry. For tailored advice on integrating the Teknik Makina U936TM into a specific machining process or to request procurement through Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and availability Technical data Article number: U936TM Manufacturer: Teknik Makina Product name: Vollbohrer Facts Diameter: 36 mm Cutting length: 72 mm Overall length: 167 mm Shank diameter (D): 32 mm Shank length: 58 mm Weight: 0.893 kg ECLASS: 21180201 Special features Compatible inserts: SPMG 1104 Compatible insert manufacturers: Taegutec, YG-1 Suitable for indexable insert drilling applications FAQ What hole diameters can be produced with this drill? The drill body supports a nominal cutting diameter of 36 mm; hole size is determined by the fitting SPMG 1104 insert geometry and the mounted configuration of the U936TM. Which insert types fit the tool body? The tool is specified for SPMG 1104 inserts and is compatible with inserts supplied by Taegutec and YG-1, allowing selection of grades to match the machined material. Can this drill be used in standard toolholders? Yes — the U936TM features a 32 mm shank diameter and a 58 mm shank length for integration with common holders and collets that accept this shank size. How does replacing an insert affect downtime? Replacing an SPMG 1104 insert on the U936TM restores cutting geometry quickly, reducing downtime compared with regrinding solid drills and improving overall tool availability. Is the U936TM suitable for high-volume production? The combination of replaceable inserts and robust shank design makes the tool well suited to serial production where repeatability and economical insert changes are priorities. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust tool that pairs precision with practical economy: the solid drill combines a 36 mm cutting diameter and a 108 mm cutting length for efficient deep-hole work, while its 32 mm shank and 203 mm overall length ensure secure clamping and reach. Order the solid drill directly via Metav Werkzeuge or ask the consultants for application advice. Solid drill – 36 mm diameter, 108 mm cutting length (Teknik Makina) Solid drill designed for industrial drilling tasks; compatible with SPMG 1104 indexable inserts and suited to machine-tool and workshop use Diameter 36 mm for deep-hole capability Cutting length 108 mm for extended reach Shank Ø 32 mm for secure clamping Compatible with SPMG 1104 indexable inserts Precision and measurable performance for industrial drills The solid drill is built to deliver reproducible results where hole accuracy and process stability matter. With a 36 mm nominal diameter and a 108 mm cutting length, the tool provides a consistent cutting engagement suited to series production and machining centres. The 32 mm shank dimension offers a standard clamping interface to common toolholders, helping to maintain concentricity and reduce run-out. Specified numeric values give clear comparability and support planning for spindle capacity and feed parameters. Flexible insert compatibility reduces tool costs and downtime Designed for indexable inserts of type SPMG 1104, the drilling head accepts inserts from established manufacturers such as Taegutec and YG-1, allowing grades to be selected for specific materials or cycle demands. This compatibility lets operators replace cutting edges without discarding the entire body, improving cost-efficiency and lowering consumable inventory. The replaceable-insert approach supports targeted use of carbide grades and coatings when high-speed machining or particular surface finishes are required. Practical specifications, handling and workshop integration Key workshop data are straightforward: total length 203 mm, shank length 58 mm, and tool weight 1.043 kg. These figures aid process planning for tool offsets, reach and dynamic balancing. The product is listed under SKU U836TM, which simplifies reordering and stock management. The construction and dimensions permit integration into standard tool management systems and support predictable setup times, contributing directly to improved throughput on repetitive drilling tasks. Contact Metav Werkzeuge for tailored application advice and secure the Teknik Cutting Tools solid drill U836TM for immediate dispatch from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U836TM Manufacturer: Teknik Makina Product name: Solid drill Facts Diameter: 36 mm Cutting length: 108 mm Shank diameter: 32 mm Shank length: 58 mm Total length: 203 mm Weight: 1.043 kg Special features Compatible with SPMG 1104 indexable inserts Suitable insert manufacturers: Taegutec, YG-1 SKU: U836TM FAQ Which insert type fits this drill? The drill accepts SPMG 1104 indexable inserts; compatible grades from Taegutec and YG-1 can be used to match material and cycle needs. What are the key dimensions for machine setup? Relevant setup values are diameter 36 mm, cutting length 108 mm, shank Ø 32 mm and total length 203 mm for clearance and tool offset planning. Is the tool suitable for CNC production? Yes, the geometry and shank dimensions of the solid drill make it appropriate for CNC machining centres where indexable inserts are used for efficient edge changes. How is the tool identified for reordering? Reorder using SKU U836TM; this ensures the correct variant and dimensions are supplied for continued process stability. What are the handling benefits of replaceable inserts? Using SPMG 1104 inserts reduces tool body replacement, shortens maintenance time and allows selection of cutting grades for different materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of efficient insert replacement and robust clamping: the indexable design reduces downtime while the Ø 36 mm cutting diameter with a 144 mm cutting length supports deeper bores. Secure clamping is provided by the 32 mm shank with a 58 mm clamping length. Order the indexable drill body directly via Metav Werkzeuge or ask our consultants for compatibility advice. Indexable drill body — Ø 36 mm, 144 mm cutting length (Teknik Makina) Indexable drill body for high-productivity drilling in workshop and industrial settings, compatible with Korloy WCM-06T3 inserts Ø 36 mm cutting diameter 144 mm effective cutting length Compatible with Korloy WCM-06T3 inserts 32 mm shank, 58 mm clamping length Reliable productivity for deep, repeatable drilling The indexable drill body offers a cost-efficient approach to medium-deep drilling where frequent regrinding would increase cycle costs. With a Ø 36 mm diameter and 144 mm cutting length, the tool keeps machining time predictable and reduces tool-change interruptions by using replaceable inserts. The indexed cutting system allows fast insert changes and predictable wear behaviour, which supports continuous production runs and lowers per-hole tooling costs. Fast maintenance and clear compatibility advantages Compatibility with Korloy WCM-06T3 inserts gives access to a broad range of readily available cutting grades and geometries, simplifying inventory management. The drill body accepts standard replaceable inserts, which means blade changes are completed in minutes rather than hours. This modularity translates into quicker set-ups and a clearer spare-parts strategy for the workshop, improving overall equipment effectiveness. Secure clamping and handling for accurate bore quality A 32 mm shank with a 58 mm clamping length provides a solid interface for most toolholders and chucks, helping to reduce runout and vibration. Robust clamping contributes directly to bore accuracy and surface finish; stable toolholding reduces tool deflection and delivers consistent hole diameters across batches. The relatively compact overall length of 239 mm balances reach with rigidity for improved repeatability in series machining. Practical recommendation for integration into production This drill body is suited to applications where insert-based drilling is preferred for ease of maintenance and cost control. The combination of 144 mm cutting length and an overall length of 239 mm makes the tool suitable for stepped or through-hole operations within its dimensional limits. For shops standardising on Korloy inserts or seeking a reliable indexable solution, this design offers an immediate route to reduced cycle downtime and simplified inventory. For parts supply and technical advice on Teknik Makina indexable drill bodies such as the U636TM, contact Metav Werkzeuge for fast stock checks and compatibility support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U636TM Manufacturer: Teknik Makina Product type: Indexable drill body Diameter: 36 mm Overall length: 239 mm Cutting length: 144 mm Core dimensions Shank diameter: 32 mm Shank/clamping length: 58 mm Weight: 1.172 kg Compatibility & features Compatible inserts: Korloy WCM-06T3 Suitable for indexable insert system Brand: Teknik Makina FAQ What insert type does this drill body accept? The drill body accepts Korloy WCM-06T3 inserts; this compatibility is specified for the Teknik Makina indexable drill body U636TM. What are the key dimensions to check for machine compatibility? Check the 32 mm shank diameter and 58 mm clamping length plus the overall length of 239 mm to ensure correct fit in the chosen toolholder for the U636TM. Is this drill body suitable for deep-hole drilling? With a 144 mm cutting length and a Ø 36 mm diameter, the tool is designed for medium-deep drilling tasks where insert replaceability is preferred. How quickly can inserts be replaced on this tool? Insert replacement follows standard indexable procedures; the modular design of the U636TM enables fast insert changes, reducing machine downtime. Which brand manufactures this indexable drill body? The tool is offered by Teknik Makina and listed under SKU U636TM for identification and order processing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine durable indexable drilling performance with economical insert replacement and secure shank clamping for reliable production runs. Order the indexable drill U796TM directly via Metav Werkzeuge or ask the consultants for tailored application support. Indexable drill U796TM — 36 mm diameter, compatible with Korloy WCM‑06T3 The indexable drill U796TM is a production-oriented drill body designed for efficient holemaking in machine shops and CNC centres, offering a balance of reach and rigidity for medium-to-deep drilling tasks. Compatible with Korloy WCM-06T3 inserts 36 mm diameter for medium-to-large holes 180 mm cutting length for deep drilling 32 mm shank for secure clamping Robust, production-ready drill body Consistent hole quality with efficient metal removal The U796TM body is engineered to maintain steady cutting conditions across long cycles, with a 36 mm diameter and 180 mm cutting length that enable deeper passes without sacrificing accuracy. The geometry of an indexable system concentrates wear on the replaceable cutting elements, so the drill body keeps its datum points stable over many regrinds of the inserts. As a result, hole position and roundness remain consistent throughout production batches, improving throughput and reducing rework. For process planners, the clear separation of body and insert wear means predictable maintenance intervals and simpler inventory management. Secure clamping and economical insert handling A 32 mm shank with a 58 mm shank length offers a rigid, repeatable interface to standard toolholders, reducing vibration and enhancing surface finish. The U796TM accepts Korloy WCM‑06T3 indexable inserts, which are widely available and designed for fast indexing and replacement. This arrangement lowers per-hole cost compared with solid tooling because only the insert is renewed when worn. For operators unfamiliar with indexable systems, an indexable insert is a replaceable carbide cutting tip fixed to the drill body; it shortens downtime and makes tool handling safer and more economical in series production. Production-ready dimensions and workshop integration With an overall length of 275 mm and a body weight of 1.172 kg, the drill balances reach and stability for both manual setups and automated spindle applications. The configuration is suited to CNC centres and heavy-duty drilling machines where secure clamping and predictable tool life matter. Selecting appropriate inserts for the workpiece material allows the same drill body to serve across a variety of tasks, from general machining to alloyed-steel operations. Metav’s offering acts as a quality filter for the European market, providing tested tooling and supply continuity so procurement and shopfloor teams can rely on availability and consistent performance. Secure tailored stock and application advice from Metav Werkzeuge for the Teknik Makina indexable drill U796TM and ensure the correct insert choice for each material and process. Technical data Article number: U796TM Designation: Indexable drill (translated) Manufacturer: Teknik Makina Diameter: 36 mm Cutting length: 180 mm Overall length: 275 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.172 kg Compatible inserts: WCM-06T3 Compatible insert manufacturer: Korloy SKU: U796TM FAQ Which inserts are compatible with this drill body? The indexable drill U796TM is specified for Korloy WCM‑06T3 inserts; selecting the correct grade and geometry of those inserts determines material suitability and achievable cutting data. What clamping interface is required for the U796TM? A 32 mm shank bore and sufficient clamping length are required; the drill’s 32 mm shank and 58 mm shank length are intended for secure, vibration‑reducing clamping in standard toolholders. Is this drill suitable for deep-hole machining? With a 180 mm cutting length and 275 mm overall reach, the U796TM is designed for medium-to-deep drilling operations typical in production environments; final depth capability depends on setup rigidity and chosen inserts. How does using indexable inserts affect running costs? Replaceable inserts lower lifecycle costs by limiting expensive maintenance to the cutting tips; the U796TM drill body allows rapid index changes, reducing machine downtime and lowering per-hole expenditure. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust shank support, economical insert compatibility and precise geometry for consistent hole quality and predictable tool life; order directly through Metav Werkzeuge or consult our specialists for delivery and technical advice. Indexable Drill Body U180TM — Ø36 mm, shank Ø32 mm Indexable Drill Body U180TM designed for medium-deep drilling with replaceable Korloy inserts; suited to production environments where repeatability and simple tool replacement are priorities Compatible with Korloy WCM-06T3 inserts Shank Ø 32 mm for secure clamping Cutting length 108 mm for medium-deep holes Overall length 203 mm for standard toolholders Stable geometry for consistent hole quality The tool body is engineered to provide a rigid connection between spindle and cutting edge. With an external diameter of Ø36 mm and an overall length of 203 mm, the construction reduces deflection and ensures repeatability across batches. The design focuses on precise contact points and concentricity to support stable cutting, which translates into consistent hole tolerance and reduced rework in serial production. Insert compatibility that lowers operating cost Designed for use with Korloy indexable inserts of type WCM-06T3, the drill body removes the need for full-tool replacement when the cutting edge is worn. The ability to replace only the insert shortens downtime and lowers tooling expense, while maintaining cutting-edge quality. For workshops seeking predictable tooling budgets, interchangeable inserts present a straightforward way to reduce per-hole costs without compromising process control. Secure shank and straightforward toolholding A robust shank Ø 32 mm with a shank length of 58 mm provides a solid clamping interface for common toolholders. The specified cutting length 108 mm is balanced against the shank dimensions to keep the centre of rigidity close to the cutting zone. The result is improved surface finish and reduced runout risk in through-holes and blind-hole operations. The item is listed under U180TM and is prepared for integration into standard machining setups that accept a 32 mm shank. Practical handling and workshop logistics Weighing 1.092 kg, the body is easy to handle while still being substantial enough to dampen vibration during operation. The configuration supports efficient storage and clear identification in a tool room; the drill body is compatible with Korloy inserts, simplifying inventory by separating bodies from consumable inserts. Delivered by a reliable supplier network, the component suits small-series shops and production environments that value traceability and immediate availability. For procurement or a tailored quotation, contact Metav Werkzeuge for delivery from Emmerich and expert guidance — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U180TM Manufacturer: Teknik Makina Facts Diameter: 36 mm Overall length: 203 mm Cutting length: 108 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.092 kg Special features Compatible inserts: WCM-06T3 Compatible insert manufacturer: Korloy Brand: Teknik Makina FAQ Which inserts fit this drill body? The drill body accepts WCM-06T3 indexable inserts from Korloy, as specified for the U180TM. What are the key dimensions to check before ordering? Check the drill diameter 36 mm, cutting length 108 mm, overall length 203 mm, and shank Ø 32 mm to ensure holder compatibility. Will the shank fit standard toolholders? Yes, the shank Ø 32 mm and shank length 58 mm are designed for holders that accept a 32 mm shank; verify clamping type and seat compatibility with the toolholder manufacturer. How heavy is the tool body and does that affect handling? The body weighs 1.092 kg, providing a stable feel that helps dampen vibration while remaining manageable for routine tool changes. Can the drill body be used in serial production? The U180TM is designed for repeatable performance and economical insert changes, making it suitable for serial and batch production where predictable tool life is important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of rigid clamping, simple insert replacement and precise groove control for reliable production cycles — order the tool directly via Metav Werkzeuge or ask our consultants for application advice. Grooving clamp holder K674TM by Teknik Makina — 3 mm cutting width, 32 mm shank The Grooving clamp holder K674TM is designed for secure parting and grooving in lathe operations, accepting 3C indexable inserts for efficient metalcutting on compatible toolposts. 3 mm effective cutting width 32 mm shank diameter S32S compatibility 55 mm cutting height for deep grooves Compatible with ISCAR 3C indexable inserts Rigid clamping for vibration-free groove machining The holder delivers rigid clamping that reduces chatter and improves surface finish during parting and grooving. With an ISO shank S32S and a 32 mm shank diameter, the design transfers cutting forces reliably into the machine, so progressive tool wear is minimised and tool life is extended. The combination of a 3 mm cutting width and a 55 mm cutting height enables consistent groove depth control, making the component finish more predictable and reducing scrap rates. This stability supports higher feed rates while maintaining dimensional precision. Quick insert changes and broad insert compatibility Designed for indexable tooling, the holder accepts 3C indexable inserts and is specified as compatible with ISCAR inserts, which simplifies procurement and replacement cycles. The clamp-style head allows safe and straightforward insert seating and fastening, reducing downtime during tool changes. By using proven insert geometries, the system enables faster return to production and consistent cutting performance, which is particularly valuable in batch production and repair workshops where throughput and repeatability are essential. Compact integration and workshop benefits With a 250 mm overall length and a mass of 1.62 kg, the holder balances rigidity with easy handling during set-up. The 37 mm body diameter and the shank profile suit standard tool posts and turrets compatible with S32S holders, enabling seamless integration into existing setups. For machine shops and toolrooms, this means quicker tool changeovers and predictable set-up times. The robust construction promotes long-term reliability, while the clear specification makes planning replacement inserts and spare parts straightforward for purchasing and maintenance teams. For reliable grooving and dependable compatibility choose the Teknik Makina K674TM — contact Metav Werkzeuge for tailored technical advice and swift supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: K674TM Manufacturer: Teknik Makina Core dimensions Shank diameter: 32 mm Cutting width: 3 mm Cutting height: 55 mm Body diameter: 37 mm Overall length: 250 mm Weight: 1.62 kg Compatibility / Features For indexable inserts: 3C Compatible insert manufacturer: ISCAR ISO shank designation: S32S Alternate designation: 3C-R DGN FAQ Which insert type fits the holder? The grooving clamp holder accepts 3C indexable inserts; ISCAR 3C grades are compatible and recommended for standard grooving and parting tasks with the K674TM. What is the shank size and mounting standard? The tool uses an ISO S32S shank with a 32 mm diameter, suitable for toolposts and turrets that accept S32S-style holders. What groove dimensions can be achieved with this holder? The holder is specified for a 3 mm cutting width and a 55 mm cutting height, providing controlled groove depth and consistent repeatability when set up correctly. Is the holder suitable for heavy-duty turning operations? The K674TM by Teknik Makina is designed for stable grooving and parting; its 32 mm shank and robust clamp design favour applications where rigidity and vibration control are required. How should insert changes be carried out? Insert changes are performed by loosening the clamp screw, replacing the 3C insert, and torquing to the recommended clamp specification; the straightforward clamp arrangement reduces changeover time. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise fit and clear compatibility with the 37–48 CCMT 09T3 boring tool to maintain stable cutting conditions and reduce setup time; the compact design facilitates quick replacement and consistent performance on the shop floor. Order the KR104TM cartridge directly via Metav Werkzeuge or ask the consultants for tailored advice. KR104TM Cartridge for Boring Tool 37–48 CCMT 09T3 — Secure insert retention, Teknik Makina A KR104TM Cartridge engineered to provide secure insert clamping in the boring tool 37–48 CCMT 09T3, intended for internal and light external boring and turning applications Compatible with Boring Tool 37–48 CCMT 09T3 Precision fit for stable insert retention Robust construction for workshop use Improved machining stability through precise insert retention The KR104TM cartridge delivers consistent insert clamping, which reduces micro‑movement and vibration during cutting. By securing the CCMT 09T3 insert firmly, the assembly supports stable cutting conditions that help to extend insert life and maintain surface finish quality. For unfamiliar readers: CCMT 09T3 denotes a common carbide insert geometry used for finishing and semi‑finishing; ensuring correct retention prevents chipping and irregular wear while supporting predictable tool performance. Faster maintenance and predictable production flow Designed for quick exchange, the cartridge simplifies replacement procedures and shortens machine downtime. The compact design of the retention unit and its clear compatibility with the boring tool 37–48 range mean setup changes are straightforward and repeatable. This ease of maintenance translates into a more efficient production rhythm and lower indirect costs, since tool change intervals become predictable and less time‑consuming for operators and maintenance staff. Ready for everyday workshop demands and varied turning tasks Manufactured by Teknik Makina with workshop use in mind, the cartridge is intended to withstand regular handling and the rigours of turning and boring operations. The construction supports use with standard CCMT 09T3 inserts across a range of materials commonly machined in light to medium duty processes. The result is a compact retention solution that supports reliable performance, helps to achieve consistent part quality and integrates seamlessly into existing toolholders for straightforward adoption. Choose the Teknik Makina KR104TM cartridge via Metav Werkzeuge for assured compatibility and dependable stock—contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and order support Technical Data Article number: KR104TM Manufacturer: Teknik Makina Description: Cartridge for Boring Tool 37–48 CCMT 09T3 Facts Compatible boring range: 37–48 Insert type compatibility: CCMT 09T3 SKU: KR104TM Special features For CCMT 09T3 inserts Compatible with Boring Tool 37–48 Replacement cartridge for boring assemblies FAQ Is the cartridge compatible with other insert types? The KR104TM cartridge is specified for use with CCMT 09T3 inserts; alternative insert geometries require verification of fit and clamping geometry before use. How does the cartridge affect tool life? By providing reliable insert retention and reducing micro‑movement, the cartridge helps to lower insert wear and can contribute to more consistent tool life for CCMT 09T3 applications. Can the cartridge be used for both internal and external operations? The cartridge is intended primarily for boring and related turning tasks within the 37–48 range; suitability for specific external operations depends on the toolholder configuration and machining parameters. Is installation complicated for workshop staff? Installation is designed to be straightforward for technicians familiar with insert assembly; the cartridge fits the matching boring tool and enables repeatable clamping for routine maintenance. What should be checked during regular inspection? Inspect the clamping faces and seating for wear or contamination and confirm correct seating of the CCMT 09T3 insert to maintain secure retention and machining stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable-insert boring bar that combines extended reach, stable shank dimensions and proven insert compatibility to keep internal turning operations precise and productive. Order directly via Metav Werkzeuge or consult the Metav team for application advice. Boring Bar TKB116TM — indexable-insert boring bar for CCMT 09T3, 204 mm cutting length (Teknik Makina) The Boring Bar TKB116TM is a purpose-built indexable-insert tool suited to internal boring and precision turning tasks where extended reach and reliable insert clamping are required. Extended 204 mm cutting length for deep bores Stable 25 mm shank reduces vibration and runout Compatible with CCMT 09T3 indexable inserts Practical overall length of 260 mm for machine clearance Consistent internal accuracy for repeatable components This boring bar is engineered to deliver stable cutting performance in series production. With a 25 mm shank diameter and a long 204 mm cutting length, the tool minimises deflection during deep internal cuts, which translates into improved roundness and surface finish. The use of indexable inserts reduces the variability inherent in solid-carbide solutions, as worn cutting edges can be replaced quickly, restoring cutting geometry without regrinding. Where process stability matters, this approach supports tighter tolerances and predictable cycle times. Productivity gains through quick insert changes and proven geometry Designed for fast maintenance, the bar accepts CCMT 09T3 inserts — a widely used grade and geometry that balances good chip control with durable cutting edges. The insert format enables straightforward seat location and clamping, shortening downtime for insert changes and reducing tooling logistics. The tool’s configuration supports efficient workshop workflows: fewer interruptions, fewer speciality grinding operations and consistent cutting-edge geometry that helps shops reach planned throughput targets sooner. Practical dimensions that suit most turning centres Measured dimensions support practical machine setup: an overall length of 260 mm and a cutting diameter range up to 48 mm provide the reach and clearance required for many internal operations. The listed diameter value of 37 mm indicates the tool’s working envelope, while the mass of 1.597 kg gives a tangible sense of its robustness. These numeric specifications make it straightforward to check spindle limits, holder compatibility and balance requirements before installation, so setups are completed with minimal iteration. Reliability and planning advantages for the workshop The bar’s design focuses on repeatable performance and minimised service intervention. Using standard indexable inserts reduces dependence on specialist regrinds and supports predictable inventory management for cutting edges. Combined with Metav’s logistics and quality filtering from Emmerich, the solution is intended to improve supply certainty and reduce the risk of production interruptions. For purchasers planning toolsets, the TKB116TM provides clear, measurable parameters for fixture design and process documentation. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina TKB116TM boring bar and to discuss stock availability and delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKB116TM Manufacturer: Teknik Makina Type: Boring bar (indexable-insert) Key measurements Maximum cutting diameter: 48 mm Nominal diameter: 37 mm Shaft diameter: 25 mm Cutting length: 204 mm Overall length: 260 mm Weight: 1.597 kg Materials & features Compatible inserts: CCMT 09T3 Indexable-insert system Files: 62de7e6333927e49dbf32755, 62de7eef0f56dbb4de4dbf60 FAQ What insert type does this bar require? The TKB116TM accepts CCMT 09T3 indexable inserts; this insert format is common for finishing and medium-cutting operations and allows quick edge replacement. What is the maximum recommended cutting diameter? The tool is specified for a maximum cutting diameter of 48 mm, with a nominal working diameter reference of 37 mm for standard setups. Which shank diameter is used for mounting? The bar has a 25 mm shank diameter, providing stiffness for deep internal cuts and compatibility with appropriately rated toolholders. How long is the cutting portion for deep boring? The cutting length is 204 mm, which is suitable for extended-reach internal machining without the need for custom extensions. Is the tool supplied with inserts? The product is supplied as an indexable-insert boring bar; inserts are not listed as included in the supplied data and should be ordered separately according to workshop requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust drilling performance and secure clamping offered by the combination of a Ø37 mm cutting diameter and a 32 mm shank; the result is consistent deep-hole accuracy with straightforward tool integration. Order the solid drill directly via Metav Werkzeuge or ask the consultants for assistance. Solid drill U181TM – Ø37 mm, 207 mm overall length (Teknik Cutting Tools) A Solid drill U181TM engineered for industrial metalworking, providing deep-hole capability and compatibility with indexable inserts for stable, high-precision machining. High-precision Ø37 mm diameter Overall length 207 mm for deep holes 32 mm shank for rigid clamping Compatible with Korloy WCM-06T3 inserts Precise deep-hole machining with measurable benefits The configuration with a 111 mm cutting length and 207 mm overall length enables reliable penetration for longer bores while maintaining true running. The distinction between cutting length and overall length matters: cutting length describes the active flute area that removes material, whereas overall length determines reach and tool overhang. Thanks to the substantial Ø37 mm diameter, the tool provides increased stiffness compared with smaller drills, which reduces deflection and improves hole geometry. For production environments this translates into higher first-pass quality and fewer rework cycles. Stable clamping and compatible insert solutions A 32 mm shank with a 58 mm shank length offers a secure interface for standard toolholders, ensuring rigid fixation and minimised vibration during operation. The design accepts WCM-06T3 indexable inserts and is specified alongside Korloy as the insert supplier, allowing quick insert changes and predictable edge geometry. Indexable inserts reduce downtime because cutting edges can be renewed without regrinding the whole tool. This combination supports consistent chip control and repeatable surface finish, particularly in batch production and CNC applications. Integration into workshop workflows and maintenance considerations Weighing 1.141 kg, the tool balances robustness with manageable handling for tool changes. The solid construction and insert compatibility simplify inventory: one shank and body with replaceable inserts instead of multiple solid tools. For workshops seeking dependable supply and technical clarity, Metav provides expert support and central warehousing for fast procurement. Routine checks of clamping surfaces and insert seating will extend service life and maintain drilling accuracy, helping to keep machining cycles efficient and predictable. Choose the Teknik Cutting Tools U181TM for reliable deep-hole performance and contact Metav Werkzeuge for supply and application advice from Emmerich to the workshop bench Technical data Article number: U181TM Manufacturer: Teknik Makina Product: Solid drill Compatible inserts: WCM-06T3 Facts Diameter: 37 mm Overall length: 207 mm Cutting length: 111 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.141 kg Special features Compatible with Korloy WCM-06T3 inserts Designed for industrial metalworking and CNC applications Robust shank for rigid clamping and reduced vibration FAQ What materials is this drill suitable for? The U181TM solid drill is intended for industrial metalworking setups; compatibility with specific materials depends on the chosen Korloy WCM-06T3 insert grade and cutting parameters for the application. How is the U181TM clamped in the machine? Clamping is achieved via the 32 mm shank in an appropriate toolholder; secure seating and the specified shank length ensure rigid fixation and consistent performance for the U181TM. Can the inserts be replaced on-site and which inserts fit? Yes, the design accepts WCM-06T3 indexable inserts from Korloy, allowing quick replacement of cutting edges without removing the entire tool body. Which machines is the tool compatible with? The tool suits standard drill holders and CNC spindles that accept a 32 mm shank and provide the required rigidity for deep-hole drilling; verify holder compatibility before use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of a Ø37 mm cutting diameter, long 148 mm cutting length and secure 32 mm shank, which together deliver stable, deeper bores with replaceable SPMG 1104 inserts; order the tool directly through Metav Werkzeuge or consult their specialists for application support. Indexable Insert Drill U737TM – Ø37 mm, SPMG 1104 compatible (Teknik Makina) The Indexable Insert Drill U737TM is a purpose-built insert-drill body for CNC machining, engineered for reliable holemaking in general metalworking where replaceable SPMG 1104 inserts are preferred. Ø37 mm cutting diameter for versatile drilling Compatible with SPMG 1104 indexable inserts 148 mm cutting length for deeper bores 32 mm shank with 58 mm mounting length Consistent hole quality for production environments Engineered for repeatable performance, this insert-style drill body yields stable results in series production. The combination of a Ø37 mm cutting head and 148 mm cutting length allows deeper penetration with less tool change frequency, reducing downtime and preserving cycle times. The insert-based concept means the cutting edge is renewed quickly by replacing SPMG 1104 inserts, which keeps tooling costs predictable while maintaining precision over long runs. Secure mounting and compatibility for machine integration The holder’s 32 mm shank and 58 mm mounting length provide a rigid connection to standard toolholders, reducing vibration and improving surface finish. The body accepts SPMG 1104 indexable inserts and is compatible with inserts from Taegutec and YG-1, making it straightforward to match cutting grades to workpiece materials. This flexibility supports integration into varied CNC setups without the need for special adaptors. Practical handling and maintenance advantages Designed for shop-floor practicality, the insert system simplifies maintenance: worn inserts are swapped rather than regrinding or replacing the whole tool, which shortens service intervals and retains concentricity. With a tool mass of 1.232 kg, the body offers a balance of rigidity and manageable handling for set-up without excessive inertia, while the insert concept reduces inventory complexity when multiple grades are used across different machines. Reliability and supply with a precision partner Supplied by Teknik Makina and distributed by Metav Werkzeuge, the drill body benefits from consistent production control and European distribution logistics. The design supports standard industrial workflows and is suited to customers seeking dependable results and simplified reconditioning. For workshops and subcontractors aiming to centralise tooling procurement, this insert drill body aligns with a supply chain that emphasises availability and measured quality. For tailored application advice or to secure supply of the Teknik Makina U737TM via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: U737TM Brand: Teknik Makina Type: Indexable insert drill body Facts Cutting diameter: 37 mm Total length: 244 mm Cutting length: 148 mm Shank diameter: 32 mm Shank mounting length: 58 mm Weight: 1.232 kg Special features Compatible inserts: SPMG 1104 Suitable insert manufacturers: Taegutec, YG-1 Suitable for CNC drilling applications FAQ What materials is this drill body intended to machine? The indexable insert drill body is designed for general metalworking; by selecting appropriate SPMG 1104 insert grades (from Taegutec or YG-1), the U737TM can be adapted to a range of ferrous and non-ferrous applications. How are worn inserts replaced on the U737TM? Worn inserts are replaced directly on the drill body; the insert seats are indexed and secured, allowing quick changeover to restore cutting performance without removing the holder from the machine spindle. Does the shank fit standard toolholders? Yes, the 32 mm shank with a 58 mm mounting length is compatible with common toolholders used in CNC machining centres, enabling secure mounting and reduced runout. Which insert types are specified for best performance? The tool is specified for SPMG 1104 indexable inserts; for optimal results, matching the insert grade from manufacturers such as Taegutec or YG-1 to the workpiece material is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable drill body combining a 37 mm cutting diameter, 74 mm cutting length and a solid 32 mm shank for reliable holemaking; order directly via Metav Werkzeuge or consult the specialists for application matching. Indexable Drill Body U139TM – 37 mm Ø, 170 mm overall length (Teknik Makina) An indexable drill body engineered for precision holemaking in CNC and turning centres, the Indexable Drill Body U139TM is designed to accept Korloy-compatible inserts for efficient production drilling. High-stability 32 mm shank Ø 37 mm cutting diameter 74 mm effective cutting length Compatible with Korloy WCM-06T3 inserts Consistent hole quality through stable design The main advantage of this indexable drill body is its stable shank geometry and balanced mass, which together reduce vibration and promote repeatable hole quality. With a 32 mm shank and an overall length of 170 mm, the tool offers a favourable rigidity-to-reach ratio for medium-deep holes. The reduced runout achieved by the precise shank and clamping interface improves tool life of the inserts and lowers scrap rates, supporting a smoother production flow and predictable cycle times. Productivity gains from effective cutting length and insert system Equipped with a 74 mm cutting length, the tool allows extended engagement without sacrificing stiffness. The use of the WCM-06T3 insert system—compatible with Korloy grade inserts—enables fast index changes and consistent cutting geometry. This combination reduces machining downtime compared with regrind cycles and supports efficient chip evacuation when paired with suitable coolant or through-tool lubrication. The modular insert approach also simplifies inventory management by standardising insert types across similar operations. Practical handling and mounting benefits The tool’s 32 mm shank and 58 mm shank length provide straightforward mounting in standard drill holders or hydraulic chucks; the nominal weight of 0.875 kg keeps handling safe while minimising spindle load during fast tool changes. Clear identification of the insert seat and compatibility data streamlines toolroom setup and reduces trial runs. For operations migrating from solid drills to indexable systems, this body offers an economical route to higher productivity with lower per-hole tooling costs. Request a tailored recommendation from Metav Werkzeuge for the Teknik Makina Indexable Drill Body U139TM, or request insert matching and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U139TM Manufacturer: Teknik Makina Designation: Indexable drill body Facts Diameter: 37 mm Overall length: 170 mm Cutting length: 74 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.875 kg Special features Compatible insert: WCM-06T3 Compatible insert manufacturer: Korloy Technical files available (2) FAQ What insert type is required for this drill body? The drill body accepts the WCM-06T3 insert type; Teknik Makina specifies Korloy compatibility for this system (SKU U139TM). What are the key dimensions to check before mounting? Verify the 32 mm shank diameter, the 58 mm shank length and the overall length of 170 mm to ensure correct clamping and clearance. How deep can this tool drill effectively? The tool provides a 74 mm cutting length, which defines the effective depth for single-pass drilling without step-downs. Is the drill body suitable for CNC applications? Yes, the design and mounting dimensions of the U139TM are intended for CNC and turning-centre use, offering stable performance in automated setups. Can Korloy inserts be sourced through Metav Werkzeuge? Metav Werkzeuge can assist with insert selection and supply, matching Korloy WCM-06T3 inserts to the Teknik Makina drill body U139TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of stable clamping and proven insert compatibility for consistent, high-throughput drilling. The design offers a generous Ø37 mm working diameter together with a 111 mm cutting length, reducing tool change frequency and supporting uninterrupted production. Order the indexable drill directly via Metav Werkzeuge or ask our consultants if needed. Indexable drill U837TM — Ø37 mm, 111 mm cutting length (Teknik Makina) The Indexable drill U837TM is an industrial indexable drilling solution designed for deep-hole operations and high-volume machining where reliable insert performance and secure shank clamping are essential. Ø37 mm working diameter 111 mm cutting length 32 mm shank for secure clamping Faster, more consistent holemaking for production runs The U837TM’s geometry, centred on a Ø37 mm working diameter and 111 mm cutting length, is engineered to reduce cycle times in repetitive drilling tasks. By accepting SPMG 1104 inserts, the tool permits rapid index changes rather than full regrinds, which translates into shorter downtime and a clearer productivity advantage on batch production. The toolholder form reduces vibration, so hole quality is maintained even during extended runs; simultaneously, the insert-based approach offers cost-effective reconditioning compared with single-piece solutions. Secure clamping and stable machining for better surface finishes A 32 mm shank and a compact overall length of 207 mm deliver a balance between reach and rigidity that is required in many workshop set-ups. The robust shank diameter, combined with a holder length of 58 mm, improves concentricity and torque transmission, which means secure clamping and reduced risk of chatter. The result is a more predictable tool life and tighter tolerances on bores, making the design suitable for production environments where repeatability and surface integrity are monitored closely. Broad insert compatibility to simplify tooling logistics Compatibility with established insert suppliers such as Taegutec and YG-1 ensures access to a wide range of grades and geometries for different workpiece materials. This flexibility lowers stocking complexity and supports fast adaptation when changing between aluminium, steel or other alloys. Using standardised inserts like SPMG 1104 also enables straightforward performance tuning — one can select grades optimised for either tough machining conditions or extended life depending on the application. Practical workshop integration and supply reliability The configuration and weight (approx. 1.057 kg) make the tool straightforward to mount and index during set-up procedures, while the overall length of 207 mm affords adequate reach for many fixturing arrangements. Delivered from Metav’s central European stock, the product is backed by a distribution model that emphasises reliable supply and clear order processing. Guidance on insert selection and machining parameters is available, allowing smoother commissioning in both small workshops and larger production cells. For application advice or to arrange supply from Metav Werkzeuge’s Emmerich stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the U837TM indexable drill and compatible insert options. Technical data Article number: U837TM Manufacturer: Teknik Makina SKU: U837TM Facts Diameter: 37 mm Cutting length: 111 mm Overall length: 207 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.057 kg Special features For indexable inserts: SPMG 1104 Compatible with inserts from Taegutec, YG-1 Indexable drill design for reduced downtime FAQ Which insert type fits this indexable drill? The U837TM accepts SPMG 1104 indexable inserts; compatible grades from Taegutec and YG-1 are supported for varied materials. What are the key dimensions required for mounting? Mounting reference dimensions include a 32 mm shank diameter, 58 mm shank length and an overall length of 207 mm, which are listed in the technical data. Is the tool suitable for deep-hole drilling in steel? The tool’s 111 mm cutting length provides capability for deeper bores; suitable insert grades from the compatible suppliers are recommended for optimised performance in steel. How does insert compatibility reduce inventory needs? Using standard SPMG 1104 inserts from multiple suppliers allows one to carry fewer unique items while retaining flexibility for different cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-stability drilling with a Ø 37 mm diameter, 148 mm cutting length and compatibility with WCM‑06T3 indexable inserts improves process reliability and reduces stoppages; procurement and technical guidance can be arranged through Metav Werkzeuge for fast supply and expert advice Indexable drill U637TM — Ø 37 mm, 148 mm cutting length The Indexable drill U637TM is an industrial indexable insert drill engineered for stable deep-hole operations in metalworking and small-series production environments Ø 37 mm for stable drilling Compatible with WCM-06T3 indexable inserts 148 mm cutting length for deep bores Shank Ø 32 mm with 58 mm shank length Consistent rigidity and repeatable hole quality for production workflows The design delivers stable clamping through a substantial shank and balanced mass, which reduces chatter and improves repeatability in bore diameter and surface finish. With a Ø 37 mm cutting diameter and a 148 mm cutting length, the tool is optimised for deeper holes where rigidity is critical. The mass of 1.26 kg contributes to vibration damping; as a result, cycle-time losses from rework are minimised and tool life is extended. Technical teams will value the predictable performance that supports tighter tolerance keeping and consistent throughput in serial manufacturing. Insert system compatibility that lowers tooling costs and downtime Compatibility with the WCM‑06T3 insert family and recognised insert suppliers such as Korloy enables quick insert changes and access to a broad range of grades for different materials and machining strategies. The indexable concept separates the cutting edge from the tool body, allowing economical replacement of worn cutting edges rather than full‑tool changes; this reduces tooling expenditure and shortens maintenance intervals. Clear insert identification and standardised seating ensure secure clamping of replaceable inserts, which supports stable cutting conditions and predictable chip control during interrupted or continuous cuts. Practical mounting and handling for workshop and machine-shop use A substantial shank Ø 32 mm and a 58 mm shank length provide secure engagement in common tool holders, enabling straightforward integration into existing tool setups. The overall length of 244 mm gives adequate extension for many machining tasks while retaining sufficient support for accurate bore making. The tool’s geometry and mass distribution have been conceived to balance rigidity with accessibility in confined machine-tool workspaces, making it suitable for production cells and maintenance spindles where reliable, repeatable clamping is essential. Designed to reduce process risk and support procurement decisions Selection of a stable, insert-compatible drill like the U637TM aligns with a procurement strategy that favours uptime and predictable total cost of ownership. The modularity of the insert system supports rapid adaptation to varied job‑shop requirements without extensive retooling. Document references supplied with the tool support traceability and inventory control; technical purchasers benefit from a clear specification set that simplifies vendor comparison and quality assessment during sourcing. For procurement or technical clarification on Teknik Cutting Tools' U637TM indexable drill, contact Metav Werkzeuge for local supply from Emmerich, technical advice and order coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U637TM Name: Indexable drill (Vollbohrer) Manufacturer: Teknik Makina Facts Diameter: 37 mm Cutting length: 148 mm Overall length: 244 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.26 kg Special features Compatible insert: WCM-06T3 Compatible insert manufacturer: Korloy Reference files: 62de7ec30f56dbb4de4dbf2d, 62de7dd9148ec6b71020ff6b FAQ What bore size and depth does the tool produce? The tool produces a nominal bore of 37 mm with a cutting length of 148 mm; overall length is 244 mm, as specified for the U637TM indexable drill. Which inserts are recommended for this drill? The U637TM is designed for WCM‑06T3 indexable inserts; insert supply and grades from Korloy are compatible for a range of machining conditions. How is the drill mounted in the machine? Mounting requires a holder that accepts a shank Ø 32 mm and supports a shank length of 58 mm to ensure secure clamping and correct concentricity for the U637TM. Can inserts be changed on-site to adapt to different materials? Yes, the indexable insert system fitted to the U637TM permits rapid insert replacement and grade changes to suit different material and cutting-speed requirements. What handling characteristics should be expected during setup? With a weight of 1.26 kg and balanced construction, the U637TM provides good damping and stability during clamping, which contributes to consistent hole quality and reduced risk of chatter Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable, high‑output drilling for deep holes is achieved by combining a 37 mm cutting diameter with a 185 mm cutting length and a robust 32 mm shank — ideal for stable, repeatable operations. Order the indexable drill body directly via Metav Werkzeuge or consult the specialists for matching inserts and application advice. Vollbohrer — Indexable drill body, Ø 37 mm, 185 mm cutting length by Teknik Makina The Vollbohrer is an indexable drill body designed for precision deep‑hole drilling in industrial CNC machining, accepting replaceable inserts for fast tool service. Ø 37 mm large-diameter capacity 185 mm cutting length for deep-hole drilling 32 mm shank for secure clamping Compatible with Korloy WCM-06T3 inserts Increased productivity through large diameter and extended cutting length The combination of a 37 mm diameter and a 185 mm cutting length enables efficient material removal with fewer tool changes, reducing cycle time in series production. As an indexable drill body, the design transfers cutting forces evenly to the spindle, which supports higher feed rates without sacrificing repeatability. The use of replaceable WCM‑06T3 inserts compatible with Korloy provides predictable tool life and consistent hole quality, so planning and process control become more straightforward. Reliable stability with a robust shank and precise clamping A substantial 32 mm shank and a clamping length of 58 mm deliver secure fixation in standard toolholders, improving radial stability and reducing run‑out. The 281 mm overall length balances reach with rigidity for deep machining while the 58 mm clamping portion ensures consistent seating in the holder. Reduced vibration from secure clamping leads to better hole geometry and longer insert life, which in turn lowers rework rates and supports a stable production flow. Cost-effective operation with indexable inserts and easy servicing Designed for industrial use, the drill body accepts WCM‑06T3 indexable inserts, so worn cutting edges can be exchanged quickly without replacing the entire tool. This approach cuts tooling costs and minimises machine downtime — a rational advantage for workshops and production lines aiming for predictable maintenance cycles. The unit’s mass of 1.3 kg contributes to its robustness during heavy cutting, while the standardised insert interface keeps procurement and stock management straightforward. Discuss machining requirements with Metav Werkzeuge — request tailored advice on Teknik Makina indexable drill bodies, insert selection and clamping options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U797TM Manufacturer: Teknik Makina Designation: Indexable drill body (Vollbohrer) Compatible inserts: WCM-06T3 (Korloy) Core data Diameter: 37 mm Cutting length: 185 mm Overall length: 281 mm Shank diameter: 32 mm Clamping length: 58 mm Weight: 1.3 kg Special features Compatible with Korloy WCM-06T3 inserts Indexable insert system for fast replacement Robust shank design for reduced run‑out FAQ Which inserts fit this drill body? The drill body accepts WCM‑06T3 indexable inserts and is specified for compatibility with Korloy insert systems for straightforward procurement. What are the key dimensions for clamping? Clamping requires a 32 mm shank diameter with a clamping length of 58 mm; the overall length is 281 mm and the cutting length is 185 mm. Is this tool suitable for deep‑hole drilling on CNC machines? Yes — the combination of a 37 mm diameter and 185 mm cutting length makes the indexable drill body well suited to deep‑hole tasks on industrial CNC equipment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 37 mm cutting diameter, a 74 mm cutting length and secure clamping via a 32 mm shank delivers stable, repeatable holemaking for production environments; order the Teknik Makina U937TM drill body directly via Metav Werkzeuge or consult their specialists for application support. U937TM indexable drill body — 37 mm diameter, 32 mm shank by Teknik Makina The U937TM indexable drill body is built for efficient, repeatable holemaking in CNC and production drilling, designed to accept SPMG 1104 indexable inserts from Taegutec and YG-1 for flexible tool management 37 mm cutting diameter 74 mm cutting length 32 mm shank diameter for secure clamping Compatible with SPMG 1104 inserts from Taegutec & YG-1 Consistent hole quality for medium-depth production drilling The robust geometry of this drill body ensures stable chip control and a reliable cutting line over extended runs. With a 37 mm nominal diameter and 74 mm effective cutting length, the tool is suited to medium-depth bore tasks where concentricity and bore tolerance matter. The design reduces radial runout and vibration, which in turn improves surface finish and dimensional repeatability; such technical stability supports higher first-pass yields and lower rework rates in batch production. Low tooling cost and fast maintenance through insert compatibility Compatibility with SPMG 1104 indexable inserts from Taegutec and YG-1 enables rapid insert changes instead of full-tool replacement, reducing consumable cost and downtime. The insert system permits controlled wear management: worn inserts are swapped in minutes, restoring cutting performance without regrinding. This approach also allows selection of grade and geometry tailored to the workpiece material, giving predictable tool life and easier cost-per-hole calculation for procurement and production planning. Secure mounting and ergonomics that protect process stability A 32 mm shank diameter and a 58 mm holder engagement ensure positive clamping in standard toolholders, while the 170 mm overall length and a measured mass of 0.931 kg balance reach with stiffness. These dimensions help maintain tool centreline alignment in a wide range of turret and spindle setups, limiting deflection under cutting load. The modular nature of the assembly simplifies set-up and inspection routines, contributing to shorter machine downtime and more consistent cycle times across shifts. Contact Metav Werkzeuge for availability of the Teknik Makina U937TM indexable drill body, technical specifications and local stocking details — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific materials and processes Technical data SKU: U937TM Manufacturer: Teknik Makina Core data Diameter: 37 mm Cutting length: 74 mm Shank diameter: 32 mm Holder engagement length: 58 mm Overall length: 170 mm Weight: 0.931 kg Features & compatibility Compatible with SPMG 1104 inserts Compatible insert manufacturers: Taegutec, YG-1 FAQ Which insert type fits this drill body? The U937TM is designed for SPMG 1104 indexable inserts; compatible grades from Taegutec and YG-1 can be used depending on the workpiece material. What are the key dimensions for mounting? Mounting requires a toolholder that accepts a 32 mm shank and provides at least 58 mm engagement; the overall length is 170 mm. Is this drill body suitable for production runs? Yes — the U937TM is engineered for repeatable production drilling with rapid insert replacement to minimise downtime. What benefits come from using indexable inserts with this body? Indexable inserts allow quick replacement of the cutting edge, lower consumable costs and flexibility to choose grades for specific materials, improving overall tool economy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of sturdy construction, precise clamping and broad insert compatibility to keep parting and grooving operations stable and productive; order the holder via Metav Werkzeuge or consult their specialists for application advice. Teknik Makina parting and grooving clamp holder K710TM — 32 mm shank, 4 mm cutting width The parting and grooving clamp holder from Teknik Makina is engineered for secure clamping of 4C indexable inserts and for use in turning and CNC lathes where rigidity and repeatability matter 32 mm shank for rigid toolholding 4 mm insert cutting width for precise grooving Compatible with ISCAR 4C indexable inserts 250 mm overall length for deep reach Rigidity and repeatability for demanding parting work The holder is built around a 32 mm shank (ISO designation S32S), which gives a high moment of inertia and reduces deflection during cut-off and grooving operations. This structural stiffness translates into improved precision and consistent part tolerances; less vibration means better surface finish and extended insert life. The relatively substantial mass (approx. 1.655 kg) and the specified body diameter 38 mm contribute to a stable setup, particularly on medium- to heavy-duty turning centres. For production environments where repeatable results are required, the combination of shank size and overall design supports shorter cycle times and fewer rejected parts. Versatile insert compatibility and cut geometry for controlled chip removal Designed to accept the 4C family of indexable inserts and specified as compatible with ISCAR, the holder supports a 4 mm cutting width and a cutting height of 60 mm, offering a balance between chip control and tool strength for narrow parting cuts or shallow grooves. The clamping concept provides positive axial and radial support for the insert, which simplifies setup and reduces the need for frequent rework. Where insert geometry or grade is changed to suit different materials, the holder’s acceptance of a standard 4C format allows fast swaps and minimal downtime, aiding continuous production and flexible batch runs. Reach, handling and application benefits that improve throughput With an overall length of 250 mm, the tool holder is suited to deeper reaches while keeping the workpiece engagement stable. The measured geometry supports both external and internal grooving styles where access depth is a constraint. The holder designation 4C-R GRP indicates a form factor intended for robust clamping of the 4C insert type, simplifying inventory and tooling selection. In practice, this reduces setup complexity and supports faster changeovers. For machining shops aiming to increase throughput without sacrificing quality, the holder’s combination of reach, clamping security and insert standardisation helps streamline operations and maintain process reliability. For specification checks, cutting-parameter advice or to source the Teknik Makina parting and grooving clamp holder (K710TM) directly, contact Metav Werkzeuge for tailored guidance and procurement support Technical Data Article number: K710TM Manufacturer: Teknik Makina Product: Parting and grooving clamp holder Compatible insert family: 4C (ISCAR) Core technical data Shank diameter: 32 mm Overall length: 250 mm Cutting width: 4 mm Cutting height: 60 mm Diameter: 38 mm Weight: 1.655 kg Design & features Shank designation: S32S Holder designation: 4C-R GRP Fits indexable inserts: 4C Compatible insert manufacturer: ISCAR FAQ Which insert family fits this clamp holder? The holder is specified for the 4C insert family and is compatible with ISCAR 4C indexable inserts; use inserts that match the 4 mm cutting width and the holder’s clamping geometry. What shank and designation are required for mounting? This tool requires a 32 mm shank and follows the S32S shank designation for secure mounting in the lathe turret or toolpost. Is the holder suitable for deep parting operations? With an overall length of 250 mm and a robust shank, the holder supports deeper reach operations while maintaining clamping stability for reliable parting. How does the 4 mm cutting width affect performance? A 4 mm cutting width offers a controlled chip thickness that improves surface finish and reduces cutting forces compared with wider parting tools, benefiting both tool life and dimensional stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust drilling solution that combines a 38 mm cutting diameter, a 114 mm cutting length and compatibility with Korloy indexable inserts for consistent hole quality and reduced downtime; order or request tailored advice via Metav Werkzeuge for a secure supply chain and on‑time delivery. Vollbohrer U182TM — Indexable drill, Ø 38 mm, 114 mm cutting length The Vollbohrer U182TM is an industrial indexable drill engineered for heavy‑duty metalworking where stable clamping and long cutting lengths are required 38 mm cutting diameter 114 mm effective cutting length 32 mm shank for sturdy clamping Compatible with Korloy WCM-06T3 inserts Consistent hole quality through defined cutting geometry Thanks to a purpose‑designed cutting length of 114 mm, this indexable drilling solution provides a controlled material removal zone that supports repeatable hole tolerances and surface finish. The combination of extended cutting engagement and the tool’s overall length of 211 mm reduces the need for multiple operations, so production flows are more efficient and set‑ups are simplified. The construction supports steady chip evacuation and helps maintain concentricity over longer depths, which benefits machining centres and production lathes alike. Stable clamping for improved process reliability A 32 mm shank delivers secure toolholding and reduced vibration under load, which directly improves hole quality and extends insert life. Compatibility with Korloy WCM-06T3 inserts enables rapid index changes and predictable cutting performance, so tool management becomes a measurable contributor to uptime. This configuration supports higher feed rates while maintaining dimensional control, making the tool suitable for series production where process stability is paramount. Practical advantages for workshop productivity At a weight of 1.188 kg, the assembly balances rigidity with manageable handling during tool changes and set‑up. Using indexable inserts reduces on‑machine downtime because worn cutting edges can be rotated or replaced without removing the entire holder. For operations aiming to reduce cycle times and minimise tool inventory complexity, the tool’s clear insert standardisation and shank dimensions help streamline procurement and maintenance routines while keeping the machining process predictable and cost‑efficient. For specification checks, batch supply or to discuss integration of the Teknik Makina Vollbohrer U182TM into existing production processes, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to secure reliable delivery and expert advice. Technical data Article number: U182TM Manufacturer: Teknik Makina Data Diameter: 38 mm Overall length: 211 mm Cutting length: 114 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.188 kg Special features Compatible insert manufacturer: Korloy Compatible insert type: WCM-06T3 Storytrigger: vollbohrer FAQ Which inserts fit this drill? The Teknik Makina Vollbohrer U182TM is compatible with Korloy WCM‑06T3 indexable inserts. What are the principal dimensions of the tool? Key dimensions for the U182TM are Ø 38 mm diameter, 114 mm cutting length and 211 mm overall length, with a 32 mm shank. What shank size is required for clamping? Clamping is specified for a 32 mm shank diameter on the U182TM. Who manufactures the tool and what is the SKU? The tool is produced by Teknik Makina; SKU: U182TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com