Gibt es einen Hahn und Kolb Online Shop?

Benefit from a compact, rigid design with a 63 mm machining diameter, internal coolant and precise 90° cutting geometry to ensure consistent turning results; order supply and application advice through Metav Werkzeuge for fast delivery and expert support. Corner tool head – 63 mm diameter, internal coolant (Teknik Makina) The corner tool head is a compact turning head designed for use with AP-- 1604 indexable inserts, engineered to deliver stable cuts and efficient chip evacuation in conventional and CNC lathe operations. 63 mm diameter for compact machining Internal coolant for improved chip evacuation Compatible with AP-- 1604 indexable inserts L45 mm overall length for stable cutting Rigidity and geometry for repeatable turning performance The compact construction with a 63 mm diameter and L45 mm overall length delivers a high stiffness-to-size ratio, which reduces vibration and improves surface finish on turned components. The integrated 90° cutting angle is specifically useful for square shoulder and profiling operations where a defined corner is required; this geometry concentrates cutting forces predictably, allowing the cutter body to maintain positional stability during interrupted cuts. With six index positions, the head offers six cutting edges, extending effective tool life before regrinding is needed. These design choices translate directly into predictable cycle times and fewer tool changes on the shopfloor, supporting continuous production runs in jobbing and small-series manufacturing. Cooling, chip control and secure insert clamping Equipped with internal coolant, the tool head channels coolant close to the cutting zone to cool the insert flank and assist chip evacuation, which helps to prolong insert life and to maintain a consistent cutting temperature. The head accepts AP-- 1604 indexable inserts from Korloy, a common standard in turning applications; this compatibility simplifies stocking and replacement. Secure clamping is provided via a Torx screw system (Torx T15, screw M4x10) that ensures repeatable seating and minimal play after reassembly. For operations sensitive to surface integrity, the combination of coolant delivery and firm clamping improves finish quality and reduces built-up edge, offering both process reliability and cost efficiency through longer insert intervals. Practical fit for workshop workflows and maintenance Weighing approximately 0.578 kg and finished for robust workshop use, the head integrates into standard toolholder arrangements and is straightforward to set up on a turret or tool post. The compact footprint is advantageous where tool-to-tool spacing is limited, and the use of standard AP-- 1604 inserts reduces logistics complexity. Routine maintenance consists of checking clamp torque with a Torx T15 driver and inspecting coolant passages for blockage; the clear service steps mean minimal downtime and predictable maintenance intervals. Backed by Teknik Makina engineering and Metav’s distribution from Emmerich, the component supports efficient implementation into production lines and offers a dependable choice where repeatability and tool life are priorities. For precision turning tasks that demand stability and efficient cooling, choose the Teknik Makina corner tool head with internal coolant and arrange supply or application consulting via Metav Werkzeuge from our Emmerich centre (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: T185-1TM Product type: Corner tool head Manufacturer: Teknik Makina eClass: 21181015 Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.578 kg Cutting edges: 6 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Special features Internal coolant For AP-- 1604 indexable inserts Compatible with Korloy inserts Label: 63mm Corner tool head AP-- 1604 L45mm with internal coolant FAQ What inserts fit this tool head? The corner tool head is designed for AP-- 1604 indexable inserts; Korloy AP-- 1604 inserts are fully compatible with the clamping geometry. Does the head provide internal coolant? Yes, internal coolant is integrated to deliver fluid close to the cutting edge, improving tool life and chip control for the Teknik Makina corner tool head (SKU T185-1TM). Which screw and key are required for insert clamping? Insert clamping uses a Torx screw M4x10 tightened with a Torx T15 driver to ensure secure and repeatable seating. Is this head suitable for compact turret setups? The compact 63 mm diameter and L45 mm length make the head suitable for tight tool spacing and turret-mounted turning tasks where rigidity and small footprint are required. How often should clamping and coolant passages be checked? Regular checks of clamp torque and coolant passages are recommended as part of routine maintenance to preserve repeatability and coolant flow for the Teknik Makina corner tool head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a combination of precision, robust design and effective cooling: the head’s 63 mm diameter and internal coolant ensure consistent shoulder cuts and reduced thermal distortion. The compact 40 mm length and a mass of 0.543 kg support stable machining and easy handling. Order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head T178-1TM – 63 mm diameter, internal coolant, for APKT 1003 indexable inserts A corner tool head engineered for precise shoulder turning and finishing with APKT 1003 indexable inserts, offering internal coolant and a 90° cutting angle for reliable square-cut performance 63 mm diameter for stable setup Internal coolant for effective cooling For APKT 1003 indexable inserts Compatible with Korloy inserts Reliable square-shoulder performance for production environments The head is designed to deliver consistent 90° cutting angle results when machining shoulders and faces. The geometry supports accurate perpendicular cuts with minimal deflection, which improves first-pass quality and reduces secondary operations. The robust body geometry combined with a 63 mm tool diameter increases rigidity; this higher stiffness lowers vibration during machining and enhances repeatability across batches. For workshops seeking predictable tolerances on repetitive tasks, the unit’s combination of stiffness and defined cutting geometry translates into time savings and fewer rejected parts. Effective cooling and chip control for longer insert life Integrated internal coolant channels feed cutting fluid directly to the cutting edge, aiding heat dissipation and chip evacuation. By directing coolant to the tool–workpiece interface, the system reduces thermal softening of the insert and limits built-up edge formation, extending insert life and maintaining surface finish quality. In practical terms, this reduces tooling intervention and replacement frequency, improving uptime in medium-to-high volume turning tasks. The design supports efficient cooling without additional external fittings, simplifying setup for shops using centralised coolant supply. Practical handling and service features that speed maintenance The holder’s total length of 40 mm and the modest mass (0.543 kg) make it straightforward to mount and balance in standard toolposts. Fastener details are standardised: the clamp uses a Torx key T8 and Torx screw M2.5×5.5, which keeps routine insert changes quick and reproducible. The head accommodates multiple cutting edges—listed as seven cutting edges in the specification—delivering flexibility for indexable insert rotations and extended service intervals. These features reduce downtime during shift changes and make the head suitable for both jobbing and light-series production. Compatibility and application scope explained This tool head is made for APKT 1003 indexable inserts and is compatible with inserts from Korloy, allowing straightforward integration into existing tooling inventories. The configuration fits applications that require precise shoulder creation, profiling and finishing on cast and alloy steels. The compact design is especially advantageous where close-tool spacing or limited overhang occurs. For users upgrading from single-point tools, the indexable system provides consistent geometry and fast replacement, which benefits quality assurance processes in industrial workshops. Contact Metav Werkzeuge today to discuss how the Teknik Makina corner tool head T178-1TM can be integrated into existing turning setups, or to request a tailored tooling recommendation from our consultants Technical data SKU: T178-1TM Product type: Corner tool head Designation: for APKT 1003 Indexable Inserts Manufacturer: Teknik Makina Core dimensions Diameter: 63 mm Total length: 40 mm Weight: 0.543 kg Cutting angle: 90° Materials & special features Internal coolant: yes Compatible insert type: APKT 1003 Compatible insert manufacturer: Korloy Fixing screw: M2.5×5.5 Torx key: T8 Number of cutting edges: 7 FAQ What insert type does this head accept? The corner tool head is designed for APKT 1003 indexable inserts and is compatible with Korloy-manufactured inserts. Is the head cooled internally or externally? The tooling features internal coolant, supplying lubricant and coolant directly to the cutting zone to improve insert life and surface finish. What is the cutting angle and why does it matter? The tool head has a 90° cutting angle, optimised for square shoulders and perpendicular facing operations where dimensional accuracy and finish are critical. Which fasteners are required for insert changes? Insert retention uses a Torx screw M2.5×5.5, serviceable with a T8 Torx key for quick, repeatable insert changes. Can this head be used in compact toolpost arrangements? Yes; with a total length of 40 mm and a balanced mass (0.543 kg), the head is suitable for confined setups and reduced overhang situations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the stability of a 63 mm tool body with internal coolant for reliable, repeatable machining; benefit from quick insert changes for low downtime and order directly via Metav Werkzeuge or consult our specialists for application advice. Eckmesserkopf corner milling head — 63 mm diameter with internal coolant by Teknik Makina The Eckmesserkopf is a corner milling head for APMT 11T3 indexable inserts designed for precision milling and efficient chip evacuation in industrial metalworking. 63 mm nominal diameter for stable cutting Internal coolant for improved tool life Compatible with APMT 11T3 Korloy inserts Stable geometry for consistent chip engagement and surface quality The larger 63 mm diameter and the solid tool-body construction deliver higher rigidity during milling operations, which reduces vibration and improves surface finish. With a 90° cutting angle and 7 cutting edges, the head offers uniform chip engagement that helps maintain dimensional accuracy over longer runs. This stability translates into fewer reworks and less machine time per part, improving throughput on prismatic and profile machining tasks. Internal coolant and thermal control to extend insert lifetime Equipped with internal coolant, the head directs coolant precisely to the cutting zone to reduce edge temperature and prevent built-up edge. Controlled coolant flow assists with chip breaking and evacuation, lowering the risk of recutting and heat-related wear. The result is prolonged insert life and more consistent cutting parameters, which supports predictable maintenance intervals and cost-efficient production cycles. Fast insert changes and standardised clamping for reliable assembly Designed for APMT 11T3 indexable inserts and compatible with Korloy insert grades, the head uses a Torx clamping system (key T8) and M2.5x5.5 Torx screws for secure, repeatable fixing. The standardised fastening means insert replacement and tool setting are straightforward, reducing downtime during tool changes. Clear torque procedures and the standard screw format support safe handling and consistent clamping force in day-to-day shop-floor use. Compact length and balanced mass for flexible mounting and handling With an overall length of 40 mm and a mass of 0.483 kg, the tool head offers a compact footprint while preserving stiffness. The compact design facilitates close-offset machining in fixtures and on multi-axis turrets where space is limited. The balanced geometry reduces centrifugal imbalance at speed and helps maintain tool life while enabling quick orientation changes on CNC machines. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina corner milling head compatible with APMT 11T3 indexable inserts (SKU T254-1TM); email info@metav-werkzeuge.com or call +49 2822 7131930 for specification checks and supply options Technical Data Article number: T254-1TM ECLASS: 21181015 Product type: Corner milling head Manufacturer: Teknik Makina Core dimensions and weights Diameter: 63 mm Overall length: 40 mm Weight: 0.483 kg Cutting angle: 90° Cutting edges: 7 Designs and special features Internal coolant: yes Indexable inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ What materials is this head suitable for? The corner milling head from Teknik Makina (corner milling head, SKU T254-1TM) is designed for general industrial milling; compatibility with specific materials depends on the chosen APMT 11T3 insert grade and cutting data rather than the head itself. How does internal coolant improve performance? Internal coolant on this head delivers fluid directly to the cutting zone, lowering cutting-edge temperature and improving chip evacuation—this helps extend insert life and stabilise cutting conditions for the APMT 11T3 arrangement. Are Korloy inserts the only compatible brand? The head is specified as compatible with APMT 11T3 inserts and is known to accept Korloy-manufactured inserts; alternative brands using the APMT 11T3 geometry can be used provided they match the insert seat and clamping specifications. What fastening hardware is required for insert installation? Insert clamping uses a Torx screw specification M2.5x5.5 secured with a T8 Torx key, enabling standardised and repeatable clamping torque across maintenance cycles. Can this head be used in compact toolholders or confined turrets? Yes. The 40 mm overall length and compact mass (0.483 kg) make the head well suited to tight spaces and multi-axis turrets where short overhang and low imbalance are required for reliable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of internal coolant, a 63 mm tool head diameter and secure Torx clamping ensures stable machining and consistent surface quality; combine robustness and compact design for reliable cycle times. Order the component directly via Metav Werkzeuge or consult the specialists for application guidance. Corner Tool Head T594TM for TNKT 1606 Indexable Inserts — 63 mm, internal coolant (Teknik Makina) The Corner Tool Head T594TM is a compact indexable insert holder designed for TNKT 1606 inserts, delivering coolant-fed chip control and a short overall length for tight turret clearance. 63 mm diameter for stable machining Internal coolant for effective chip evacuation Compatible with TNKT 1606 inserts (Korloy) Compact overall length 40 mm for tight tool layouts Consistent clamping and dimensional stability for precision turning The robust design with a 63 mm head diameter and a 22 mm mounting bore provides a stable support platform that reduces vibration and runout. Dimensionally compact with an overall length of 40 mm, this corner head suits close-clearance tool layouts while maintaining repeatable positioning. The holder’s mass of 0.432 kg contributes to steady cutting conditions and consistent surface finish when used in cyclic production. These design choices translate into reliable tolerances and predictable component quality across batches. Coolant-fed design improves tool life and process reliability Equipped with internal coolant, the holder delivers directed cooling to the cutting zone, improving chip evacuation and reducing thermal load on the insert. This feature helps maintain cutting-edge geometry for longer intervals, which supports extended tool life and fewer index changes during a shift. The internal feed also minimises heat-related dimensional drift and enhances surface integrity on the workpiece, making the head particularly advantageous for operations where thermal stability and consistent finishes are required. Secure fastening and proven insert compatibility for fast set-up Fast, secure insert fixation is achieved with a M4x10 Torx screw and the matching T15 key specification, allowing efficient changeovers and repeatable torque application. The holder accepts TNKT 1606 indexable inserts and is matched to Korloy insert geometries for straightforward procurement and interchangeability. With six cutting edges distributed across the insert clamping arrangement and a 90° cutting angle, the system supports stable shoulder and face turning operations while keeping maintenance and set-up times to a minimum. Contact Metav Werkzeuge for application-specific advice on the Teknik Cutting Tools corner head T594TM with internal coolant, and request detailed compatibility checks or delivery options from our Emmerich specialists Technical data SKU: T594TM Product type: Corner tool head Compatible inserts: TNKT 1606 Compatible insert manufacturer: Korloy Brand: Teknik Makina Dimensions & weight Diameter: 63 mm Overall length: 40 mm Mounting bore: 22 mm Weight: 0.432 kg Cutting edges: 6 Cutting angle: 90° Features & fittings Internal coolant: Yes Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this tool head? The corner head accepts TNKT 1606 indexable inserts; it is specified for inserts from Korloy and designed to match their seat geometry. Does the tool head supply coolant to the cutting edge? Yes, the T594TM features internal coolant delivery to the insert zone to support chip evacuation and reduce cutting temperatures. What are the key mounting dimensions? The holder has a 63 mm head diameter, a 22 mm mounting bore and an overall length of 40 mm, suitable for compact turret configurations. How is the insert fastened and which torque tool is required? Inserts are secured with a M4x10 Torx screw and the specified key size is T15, enabling consistent tightening and quick changes. What cutting geometry does the head offer? The head provides a 90° cutting angle and supports six cutting edges in its intended insert arrangement for stable shoulder and face machining. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust compatibility and targeted cooling to improve surface finish and extend tool life; the integrated coolant and secure Torx clamping reduce downtime and simplify maintenance. Order the part directly via Metav Werkzeuge or consult the Metav team for application support. Corner tool head T217-1TM — 63 mm with internal coolant for ADMT 1204 indexable inserts (Teknik Makina) A corner tool head engineered for short overhang turning and 90° shoulder work with ADMT 1204 indexable inserts, offering internal coolant supply for improved chip control and tool life 63 mm diameter holder Internal coolant channel Compatible with ADMT 1204 inserts 90° cutting angle for shoulder work Consistent chip control and longer tool life The angular holder is designed to channel coolant directly to the cutting zone via an internal coolant path, which promotes efficient chip evacuation and reduces thermal load on the insert. With a compact 63 mm body and an overall length of 45 mm, this configuration is suited to operations where rigidity and minimal overhang are essential. The targeted coolant delivery is particularly beneficial for interrupted cuts and heavy feed conditions, as the cooling action slows wear and helps to maintain dimensional stability over longer production runs. Secure clamping and quick insert replacement Clamping is executed with a Torx fastener system to ensure repeatable, vibration-resistant seating. The supplied T8 Torx interface and M3x7 screw provide a reliable connection that minimises setup variation and cutting-edge movement. The head supports six cutting edges, enabling efficient indexable insert changes and predictable maintenance cycles. These features reduce machine downtime and simplify tool change routines, supporting higher net machining time and consistent part quality. Designed for industrial use and straightforward integration Manufactured by Teknik Makina and matched to ADMT 1204 indexable inserts from Walter, the head is tailored for facing, square-shoulder turning and other 90° operations where a robust seat and coolant access are required. At 0.61 kg, the unit offers a balance between mass for damping and manageable handling during toolset updates. Inventory and supply are supported through Metav’s Emmerich distribution, where availability is combined with quality control to ensure dependable delivery and technical backing for production environments. Contact Metav Werkzeuge to secure the Teknik Makina corner tool head with internal coolant and confirm suitability for specific turning applications — Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance Technical data SKU: T217-1TM Label: 63mm Eckmesserkopf ADMT 1204 L45mm mit Innenkühlung ECLASS: 21181015 Product type: Corner tool head Manufacturer: Teknik Makina Measurements & weight Diameter: 63 mm Overall length: 45 mm Weight: 0.61 kg Cutting angle: 90° Number of cutting edges: 6 Features & fittings Internal coolant: yes Compatible inserts: ADMT 1204 Compatible insert manufacturer: Walter Torx key size: T8 Torx screw: M3x7 FAQ What inserts fit this holder? The corner tool head is designed for ADMT 1204 indexable inserts and is compatible with inserts from Walter as specified. Does the head provide through-tool coolant? Yes, the unit features an internal coolant channel that delivers coolant directly to the cutting edge to aid chip control and tool life. Which fastener is used to secure the insert? Insert clamping uses a T8 Torx interface with an M3x7 screw for secure and repeatable seating. Is the head suitable for 90° shoulder turning? The 90° cutting angle and compact geometry make the head well suited to facing and square-shoulder turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 90° cutting geometry, internal coolant, and compatibility with ADKT 10T3 indexable inserts for consistent, high-quality turning operations; order the component directly via Metav Werkzeuge or consult our specialists for application advice. Corner turning head T699TM – 63 mm diameter, internal coolant by Teknik Makina The corner turning head for ADKT 10T3 indexable inserts is designed for short overhang turning and reliable coolant-fed cutting in industrial workshop environments. 63 mm diameter head Internal coolant supply Compatible with ADKT 10T3 inserts 90° cutting angle for precise cuts T8 Torx fastening, M2.5x5.5 screw Controlled cooling for longer tool life and stable metal cutting The integrated internal coolant channel directs cutting fluid precisely to the cutting edge, reducing thermal load and improving chip evacuation. This targeted cooling stabilises cutting temperatures and extends insert life, which in turn reduces tool change frequency and downtime. For machining operations that demand consistent surface finish and repeatable dimensions, the coolant-fed design supports higher productivity while preserving the integrity of the workpiece and tooling. Compact geometry for accurate corner turning and close-to-face work With a 63 mm diameter and 40 mm overall length, the holder offers a compact footprint that minimises overhang and vibration. The 90° cutting angle produces clean shoulder faces and square corners with minimal secondary operations, supporting tight tolerances in short-turning tasks. The reduced projection improves rigidity, enabling more aggressive cutting parameters where machine power and workholding permit, and contributes to consistent dimensional results in series production. Secure fastening and maintenance-friendly assembly Fastening uses a T8 Torx key and M2.5x5.5 Torx screw, ensuring repeatable clamp force and quick insert changes while maintaining seating accuracy. The design facilitates straightforward replacement of indexable inserts and routine checks without specialised fixtures. Lightweight construction at 0.44 kg keeps tool balance manageable and reduces spindle load during high-speed rotations, helping to preserve bearing life and machine performance. Compatibility and application scope for versatile workshop use The head accepts ADKT 10T3 indexable inserts and is specified as compatible with Korloy inserts, making it suitable for a wide range of steels and alloy materials when paired with the correct insert grade. The holder’s geometry and coolant capability make it appropriate for finishing and semi-finishing of turned faces and shoulders, offering a pragmatic solution for jobbing shops and production lines seeking economical insert tooling with robust performance. Discuss the T699TM corner turning head with Metav Werkzeuge for tailored tooling advice and reliable supply direct from Emmerich — Metav’s specialists can confirm fitment, recommend insert grades, and ensure fast delivery to the workshop floor Technical Data Article number: T699TM Designation: Corner turning head for ADKT 10T3 indexable inserts Brand: Teknik Makina Label: 63mm Eckmesserkopf ADKT 10T3 L40mm mit Innenkühlung Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.44 kg Cutting angle: 90° Cutting edges: 7 Internal coolant: yes Torx key: T8 Torx screw: M2.5x5.5 ECLASS: 21181015 Special features Compatibility: ADKT 10T3 indexable inserts Suitable for inserts by Korloy Coolant-fed holder design Compact short-overhang configuration Fastening with Torx screw for secure seating FAQ What insert type is required for this holder? The corner turning head accepts ADKT 10T3 indexable inserts and has been specified for compatibility with Korloy insert variants. Is the tool suitable for coolant-through machining? Yes, the holder features internal coolant to deliver cutting fluid directly to the insert edge, improving cooling and chip control. What are the key dimensions affecting rigidity? Key dimensions are a 63 mm diameter and 40 mm overall length, contributing to a short overhang and increased stiffness for turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability tool head that combines a 90° cutting angle with a Ø63 mm head for repeatable corner turning; fast insert changes are enabled by the M3x7 Torx screw and T8 key. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed. Corner turning head T217TM — compact head for ADMT 1204 indexable inserts, 90° cutting angle (Teknik Makina) Corner turning head T217TM provides a robust, space-saving solution for turning and facing operations with ADMT 1204 indexable inserts, designed for short overhangs and secure clamping in workshop and production environments. 90° cutting angle for accurate corner turning Compatible with ADMT 1204 indexable inserts Ø63 mm head diameter for stable machining 22 mm shank diameter for secure clamping Consistent corner geometry for reliable machining The head features a 90° cutting angle, combined with a Ø63 mm head diameter, which ensures stable contact at the cut and helps to maintain dimensional consistency across successive parts. The stable tool geometry reduces tool vibration and supports improved surface finish and repeatability. For operations where tight corner definition matters, this compact design helps to control cutting forces and supports predictable tool life. Fast serviceability and compact handling to reduce downtime Maintenance is straightforward thanks to the M3x7 Torx screw and matched T8 key, enabling quick insert changes without specialised tooling. The 22 mm shank and the short overall length (45 mm) make the head easy to clamp and manoeuvre in confined tool turrets or fixtures; the modest weight of 0.61 kg aids rapid indexing and reduces inertia on the turret. Together these features lower setup time and keep cycle interruptions to a minimum. Flexible compatibility for standardised tooling systems Designed for ADMT 1204 indexable inserts and indicated as suitable for Walter inserts, the head aligns with common insert inventories, reducing the need for special tooling stocks. The configuration supports multiple cutting edges and repeatable positioning, making it a pragmatic choice for job shops and production lines that favour standardised insert systems. Integration into existing tool setups is straightforward due to the conventional mounting dimensions and secure clamping interface. Contact Metav Werkzeuge to arrange delivery from Emmerich or to discuss how the Teknik Makina corner turning head T217TM can shorten setup times and standardise tooling across the workshop. Technical data Article number: T217TM Manufacturer: Teknik Makina Product: Corner turning head for ADMT 1204 indexable inserts Facts Head diameter: 63 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.61 kg Cutting angle: 90° Cutting edges: 6 Torx screw: M3x7 Torx key: T8 Compatibility & features Compatible with ADMT 1204 indexable inserts Suitable for Walter inserts Brand: Teknik Makina FAQ What insert type does the head accept? The head accepts ADMT 1204 indexable inserts; the design is compatible with commonly stocked Walter inserts for straightforward replacement. What are the mounting dimensions for the tool head? The shank diameter is 22 mm and the overall length is 45 mm, enabling compact mounting in standard turrets and fixtures. How is the insert secured and replaced? Insert retention uses an M3x7 Torx screw; a T8 key is specified for removal and replacement, permitting quick servicing with minimal downtime. Is the head suitable for heavy-duty turning? The head’s Ø63 mm diameter and rigid geometry provide good stability for many corner turning tasks; check machine and process parameters for specific heavy-duty requirements. What is the product weight and how does that affect use? The unit weighs 0.61 kg, which helps to keep turret inertia low and supports rapid indexing during multi-position operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable machining performance and stable cycle times are achieved through the combination of integrated internal coolant and a secure Torx M5x12 fastening; pair the 63 mm body and 90° cutting geometry with ANKX 1706 indexable inserts for predictable tool life. Order the tool directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head for ANKX 1706 indexable inserts – 63 mm, internal coolant (Teknik Makina) Corner tool head designed for turning and facing operations with ANKX 1706 indexable inserts, offering internal coolant for improved chip control and consistent surface quality Integrated internal coolant 63 mm diameter tool body Compatible with ISCAR ANKX 1706 inserts 90° cutting angle for stability Greater process stability through internal coolant and insert compatibility The design combines an integrated internal coolant channel with a compact geometry to support stable cutting conditions. By directing coolant to the cutting zone, heat is reduced and chip control is improved, which helps to prolong insert life and reduce secondary finishing. The component is optimised for ANKX 1706 indexable inserts, ensuring a precise seat and repeatable cutting position; this compatibility makes the head suitable for medium to heavy finishing where consistent dimensional control is required. Secure fastening and precise cutting geometry for repeatable results A proven clamping arrangement with Torx T20 actuation and an M5x12 screw secures the insert and keeps runout to a minimum, which is essential for high-repeatability turning operations. The 90° cutting angle offers a robust engagement and is beneficial where axial forces must be controlled. With five cutting edges available per insert position, the system supports efficient indexation and predictable changeover intervals, reducing unplanned downtime and improving overall throughput. Compact dimensions and balanced mass for reliable handling in machines The tool head’s 63 mm diameter and 45 mm overall length provide a compact footprint while maintaining sufficient stability for accurate machining. At 0.573 kg, the assembly combines low mass with structural rigidity, simplifying handling during tool changes and lowering spindle load where relevant. Compatibility with ISCAR inserts broadens application options across many workshops, supporting standardisation of tooling and easier stock management. Practical advantages for production environments Designed for integration into standard toolholder systems, the head supports quick indexable insert changes and routine maintenance. The internal coolant reduces the need for secondary interventions due to thermal distortion or built-up edge, delivering measurable gains in cycle reliability. For procurement, the consistent mechanical interfaces and Torx fixing simplify spare-part planning and toolroom routines, resulting in lower administrative and operational overheads while maintaining machining quality. For ordering or detailed technical consultation regarding Teknik Makina’s corner tool head (SKU T444-1TM), contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: T444-1TM UID: T444-1TM Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.573 kg Cutting edges: 5 Cutting angle: 90° Features Internal coolant Compatible with ANKX 1706 indexable inserts Suitable for ISCAR inserts Torx screw M5x12 Torx key T20 Product type: Corner tool head FAQ What inserts are compatible with this corner tool head? The corner tool head is designed for ANKX 1706 indexable inserts and is compatible with inserts from ISCAR as specified for the tooling system. Does the tool head provide coolant directly to the cutting edge? Yes, the head features integrated internal coolant that supplies fluid directly to the cutting zone to improve chip evacuation and reduce heat. Which fastener and key are used to secure the insert? Insert clamping is achieved with an M5x12 Torx screw driven by a Torx T20 key, ensuring a secure and repeatable fit. What are the main dimensions that affect tool setup? Key dimensions are a 63 mm diameter and a 45 mm overall length; the weight is 0.573 kg, which informs balance and mounting considerations. Is this head suitable for heavy-duty turning applications? With a 90° cutting angle and internal coolant, the head is suited to demanding finishing and medium-heavy turning tasks where stability and thermal control are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a compact 63 mm body, a reliable 90° cutting geometry and integrated coolant for steady cycle times; order the T184-1TM angle head directly via Metav Werkzeuge or consult our specialists for application support. T184-1TM 63 mm Angle Head for AP--1604 Indexable Inserts (Internal Coolant) The T184-1TM angle head is a compact 90° indexable insert holder designed for precise shoulder and facing operations using AP--1604 inserts, with integrated internal coolant for controlled chip evacuation. 63 mm compact angle head Internal coolant for reliable chip control Compatible with AP--1604 Korloy inserts T15 Torx screw, M4x10 fastening Consistent 90° geometry for high-accuracy shoulder cuts The compact holder delivers a defined 90° cutting angle and a rigid support for the insert, ensuring reproducible shoulder faces and minimal runout. Built to accept AP--1604 indexable inserts from Korloy, the design focuses on dimensional reliability and reduced setup variability. The result is a measurable improvement in part-to-part consistency and lower rework rates, making the toolhead suitable where tight tolerances are required. Integrated coolant to extend tool life and stabilise cycles With internal coolant, the head directs cutting fluid close to the cutting edge to improve heat dissipation and chip control. This cooling strategy reduces thermal wear on the insert and can prolong edge life, especially during interrupted cuts or higher feed operations. Improved chip evacuation also contributes to cleaner contact surfaces and a steadier cutting process, which supports higher process uptime and fewer unscheduled tool changes. Secure clamping and compact form for machine versatility Engineered for robust assembly, the head uses a T15 Torx key and M4x10 screw for positive insert clamping, reducing the risk of movement under load. The compact overall length of 45 mm and a mass of 0.577 kg make it suitable for installations where space is limited and dynamic stability is important. The secure fastening and compact envelope help maintain cutting stability while enabling use on smaller tool turrets and tight machining cells. Shop-floor flexibility through compatibility and serviceability Designed with five indexed edges, the head provides multiple cutting positions for extended time between insert changes and quick index operations. Compatibility with AP--1604 Korloy inserts keeps tooling straightforward and inventory lean. Supplied with clear mounting and fastening details, the angle head supports efficient maintenance routines and predictable replacement cycles, all backed by Metav’s distribution and logistics to ensure reliable supply to the workshop. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina T184-1TM angle head and to arrange delivery from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T184-1TM Label: 63mm angle head AP--1604 L45mm with internal coolant Manufacturer: Teknik Makina ECLASS: 21181015 Core specifications Diameter: 63 mm Overall length: 45 mm Weight: 0.577 kg Number of usable edges: 5 Cutting angle: 90° Fastening screw: M4x10 Torx key: T15 Internal coolant: yes Features & compatibility Indexable insert type: AP--1604 Compatible insert manufacturer: Korloy Product type: angle head (indexable insert holder) SKU/UID: T184-1TM / T184-1TM FAQ What insert type fits this angle head? The angle head accepts AP--1604 indexable inserts; compatibility with Korloy inserts is specified for the T184-1TM. Does the head provide internal coolant delivery? Yes, the T184-1TM features internal coolant to support chip control and thermal management at the cutting edge. Which fastening elements are used for the insert clamp? Insert clamping on the head is secured with an M4x10 screw tightened using a T15 Torx key. How compact is the holder for tight setups? The head has a diameter of 63 mm, an overall length of 45 mm, and weighs 0.577 kg, making it suitable for installations with limited space. How many indexed edges are available per insert position? The configuration provides five usable edges, enabling multiple index positions before insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining the 90° cutting geometry, integrated internal coolant and a rigid 63 mm body, this corner turning head delivers consistent shoulder faces and extended insert life; order the component directly via Metav Werkzeuge or contact our consultants for cutting-tool integration support. Corner turning head for APKT 1705 indexable inserts — 63 mm, internal coolant The corner turning head for APKT 1705 indexable inserts is designed for precise shoulder and form turning in production and toolroom environments, featuring internal coolant and a compact L45 mm configuration. 63 mm diameter for high rigidity Integrated internal coolant delivery Compatible with Taegutec APKT 1705 inserts Secure Torx clamping with M4x10 screws Stable shoulder finishes through coolant-fed 90° geometry The integrated internal coolant works directly at the cutting edge, reducing heat and improving chip evacuation for a consistently superior surface finish. The tool’s 90° cutting geometry produces square shoulders with minimal hand‑finishing, which shortens cycle times and reduces rework. Where thermal control is critical, coolant-fed heads help maintain insert edge condition and extend tool life, translating into measurable productivity gains on repeat batches. Rigid 63 mm body for repeatable accuracy and secure clamping A sturdy 63 mm body combined with an L45 mm overall length provides enhanced rigidity during shoulder turning and light profiling. The tool accepts a Torx T15 key for maintenance and uses an M4x10 Torx screw for insert clamping, ensuring consistent seating and repeatable pitch. This mechanical stability reduces vibration, improving dimensional accuracy and extending the usable life of both inserts and the toolholder. Workshop-ready compatibility and easy integration Designed specifically for APKT 1705 indexable inserts and marked as compatible with Taegutec, the head fits into existing turning tool families without complex adaptations. The compact mass keeps spindle load predictable while the configuration supports rapid insert changes and straightforward inventory management. For traceability and ordering the reference SKU T554-1TM provides a clear identifier in procurement systems and tool libraries. For application guidance tailored to Teknik Cutting Tools’ robust design and to procure this corner turning head through Metav Werkzeuge, contact our specialists at Metav Werkzeuge in Emmerich for specification and integration support. Technical data SKU: T554-1TM Manufacturer: Teknik Cutting Tools Product type: Corner turning head Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.52 kg Cutting angle: 90° Cutting edges: 6 Torx key: T15 Torx screw: M4x10 Internal coolant: yes ECLASS: 21181015 Special features For APKT 1705 indexable inserts Compatible with Taegutec inserts Integrated internal coolant Label: 63mm Eckmesserkopf APKT 1705 L45mm mit Innenkühlung FAQ What applications is this turning head best suited for? The corner turning head for APKT 1705 indexable inserts is optimised for shoulder turning and short‑overhang profiling where square faces and tight tolerances are required. Which inserts fit the tool and are any manufacturer recommendations given? This head accepts APKT 1705 indexable inserts and is listed as compatible with Taegutec inserts; follow the insert maker’s data for cutting parameters. How is the insert secured and how is coolant delivered? Insert clamping is via an M4x10 Torx screw tightened with a Torx T15 key, while the integrated internal coolant channel supplies lubricant directly to the cutting edge. Is the tool suitable for automated tool magazines and presetting? Yes, the compact L45 mm length and standard interface suit presetting and magazine handling in automated turning centres. What identifies this specific item for ordering or stock? Use SKU T554-1TM as the procurement reference when ordering or checking stock levels. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable cutting performance, integrated internal coolant and straightforward integration for efficient turning operations; order the holder directly via Metav Werkzeuge or consult our applications team for tailored advice. Corner cutter head T535-1TM – 63 mm indexable insert holder with internal coolant (for BDMT 11T3) by Teknik Makina The Corner cutter head T535-1TM is a compact indexable insert holder engineered for shoulder and corner turning applications with BDMT 11T3 inserts, offering internal coolant and a short overall length for confined setups. 63 mm diameter for stable machining Internal coolant for reliable chip evacuation Compatible with BDMT 11T3 indexable inserts Robust construction by Teknik Makina, SKU T535-1TM Stable machining for consistent surface quality The holder’s 63 mm diameter and compact geometry deliver improved rigidity during shoulder and corner cuts, which reduces chatter and helps achieve a consistent surface finish. Increased stability leads to fewer tool changes and more predictable cycle times, contributing to higher throughput on series parts. For workshops that prioritise repeatability, the robust design supports steady cutting parameters and reliable part tolerances. Enhanced process reliability through internal coolant Built-in internal coolant channels direct cutting fluid to the engagement zone, improving chip evacuation and cooling at the cutting edge. This focused coolant supply helps maintain cutting-edge temperatures and reduces built-up edge formation, extending insert life and lowering tooling costs per part. Fast, clean chip control also shortens secondary cleaning operations and supports uninterrupted production, making the toolholder a pragmatic choice for continuous turning tasks. Easy integration and broad insert compatibility Designed for BDMT 11T3 indexable inserts and compatible with inserts from Kyocera, the holder simplifies inventory and tooling decisions. The short overall length (40 mm) and modest mass support compact toolpost arrangements and reduce overhang. Assembly and index changes are straightforward with the specified Torx key T8 and M2.5x5.5 fastening screws, enabling quick insert swaps and minimal machine downtime. The compact footprint and standard interfaces make it suitable for both retrofit and new-tooling scenarios. For application-specific configuration and availability, contact Metav Werkzeuge for a consultation on the T535-1TM and assistance with lead times and logistics; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T535-1TM Product type: Corner cutter head Model / designation: for BDMT 11T3 indexable inserts Manufacturer: Teknik Makina Diameter: 63 mm Overall length: 40 mm Shank / mounting diameter: 22 mm Weight: 0.527 kg Cutting angle: 90° Number of cutting edges: 7 Fastening screw: M2.5x5.5 Torx key: T8 ECLASS: 21181015 Internal coolant: yes Compatible insert type: BDMT 11T3 Compatible insert manufacturer: Kyocera Product label: 63mm Eckmesserkopf BDMT 11T3 L40mm mit Innenkühlung SKU / UID: T535-1TM / T535-1TM FAQ What insert type fits this holder? The holder accepts BDMT 11T3 indexable inserts; compatibility with Kyocera-manufactured inserts is indicated for reliable fit and performance. Is internal coolant available on the T535-1TM? Yes, the T535-1TM features internal coolant channels to improve chip evacuation and cooling at the cutting edge. Which fastening hardware is required for insert mounting? Insert retention uses screw type M2.5x5.5 with a Torx T8 drive for secure and repeatable clamping. Can the holder be used in compact or confined toolpost arrangements? With an overall length of 40 mm and a 63 mm diameter, the holder is designed for compact installations and reduced overhang. What are the key dimensional specifications to check before ordering? Refer to the 63 mm diameter, 40 mm overall length and 22 mm mounting diameter to ensure compatibility with the intended toolpost and machine setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust turning head that combines precise 90° geometry with internal coolant to improve tool life and cycle stability; its compatibility with BDMT 1704 indexable inserts and Kyocera tooling ensures fast retrofits and consistent results. Order directly via Metav Werkzeuge or consult our applications team for integration advice. Eckmesserkopf T539-1TM — 63 mm 90° corner turning head with internal coolant (Teknik Makina) The Eckmesserkopf is a compact 90° corner tool head engineered for external turning operations using BDMT 1704 indexable inserts, designed to deliver stable shoulder and face cutting in confined tool setups. 63 mm diameter for compact tool rigs Internal coolant improves chip control Compatible with BDMT 1704 inserts (Kyocera) 90° cutting angle for precise shoulders Consistent machining performance with compact geometry The turning head offers a precision 90° cutting geometry that keeps shoulder faces square and tolerances tight. Built around a 63 mm body and an overall length of 40 mm, the unit is engineered for installations where space is restricted but accuracy cannot be compromised. The 90° cutting angle reduces secondary operations and simplifies programming, while the provision of six indexed cutting edges per insert position extends service intervals. As a result, throughput increases without sacrificing surface quality or repeatability. Reliable coolant supply and mechanical integrity Equipped with internal coolant, the head channels cutting fluid directly to the insert seat to improve chip evacuation and reduce heat at the cutting zone. Direct coolant feed lowers cutting temperatures and helps maintain insert edge integrity, which in turn reduces wear rates and extends tool life. The holder secures inserts with an M4x10 Torx screw and is serviced using a T15 Torx key, providing a robust clamping interface that is straightforward to maintain and quick to change during toolset swaps. Seamless compatibility and production benefits Designed for BDMT 1704 indexable inserts and compatible with Kyocera tooling, the head supports standard tooling lines and simplifies inventory management. The compact format and positive clamping deliver stable cutting conditions that reduce vibration and improve surface finish, meaning fewer rework cycles and lower overall production cost per part. The assembly’s moderate mass (0.516 kg) balances rigidity with reduced spindle load, which makes it suitable for a wide range of lathes and turning centres. Contact Metav Werkzeuge today for application support and to discuss integrating the Teknik Makina 63 mm corner turning head into existing setups — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: T539-1TM Product name: 63 mm Eckmesserkopf BDMT 1704 L40mm with internal coolant Brand: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Shank / bore diameter: 22 mm Weight: 0.516 kg Cutting angle: 90° Number of cutting edges: 6 Torx screw: M4x10 Torx key: T15 Internal coolant: yes Special features Compatible with BDMT 1704 indexable inserts Insert supplier compatibility: Kyocera Compact design for confined tool positions Robust clamp interface for secure insert retention FAQ What inserts fit this turning head? The turning head accepts BDMT 1704 indexable inserts; it is specified for compatibility with Kyocera insert geometries. Is there coolant supply to the cutting edge? Yes, the head features internal coolant to feed cutting fluid directly to the insert seat and improve chip control. Which fastener is used to secure the inserts? Inserts are locked with an M4x10 Torx screw; a T15 Torx key is recommended for assembly and replacement. What is the overall length and diameter of the holder? The holder measures 40 mm overall length with a 63 mm body diameter, optimised for compact tool layouts. What is the SKU for ordering and reference? The product is listed as T539-1TM and branded by Teknik Makina for clear procurement identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability tool head that combines a precise 90° cutting angle with reliable compatibility for LNHU 1306 indexable inserts; order or request advice via Metav Werkzeuge for fast availability and production-ready support. Corner tool head T581TM — 90° cutting angle, for LNHU 1306 indexable inserts (Teknik Makina) The Corner tool head T581TM is a compact turning accessory designed to accept LNHU 1306 indexable inserts and to deliver repeatable corner cutting in workshop and light industrial turning applications 90° cutting angle for accurate corner cuts Compatible with LNHU 1306 indexable inserts 22 mm shank for secure mounting M4x10 Torx fastening, T15 key specification Consistent corner turning with measurable precision The head is engineered around a 90° cutting angle, which ensures predictable tool engagement and consistent results when producing shoulder faces or square shoulders. By accepting LNHU 1306 indexable inserts, the design permits rapid edge changes without time-consuming regrinds, translating into shorter cycle times and higher first-pass yield. The clear interface with established insert formats also supports straightforward spare-part logistics, lowering process risk in mixed-brand operations. Secure mounting and vibration‑resistant performance A firm connection to the toolpost is achieved via the 22 mm shank, while the unit’s 63 mm diameter and 40 mm overall length contribute to inherent stiffness and stable cutting. Fastening is executed with an M4x10 Torx screw, with a T15 key dimension specified for service operations; this standardised fastener arrangement reduces setup time and prevents inconsistent clamp forces. The balanced mass (approx. 0.628 kg) helps dampen chatter, supporting finer surface finishes and extended insert life in routine turning tasks. Practical handling that keeps shops productive Tool changes and maintenance are simplified by the straightforward fastening concept and the wide availability of compatible LNHU 1306 inserts from established suppliers. Compact dimensions make the head suitable for constrained turrets or multi‑station toolposts, while the conservative geometry supports predictable chip flow at typical turning feeds. For specification checks or to confirm fitment in a specific clamping system, Metav’s technical advisors are available to evaluate the application and recommend appropriate mating components. For reliable corner turning with Teknik Cutting Tools components, contact Metav Werkzeuge for product availability and application advice — Metav Werkzeuge can support selection, stock availability and fast dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T581TM Brand: Teknik Makina Designation: Corner tool head for LNHU 1306 indexable inserts Fastening screw: M4x10 Torx key size: T15 Facts Diameter: 63 mm Shank diameter: 22 mm Overall length: 40 mm Cutting angle: 90° Number of cutting edges: 6 Weight: 0.628 kg Suitable inserts: LNHU 1306 Special features Compatible with Walter insert types Standard Torx fastening for simple maintenance Compact form for constrained tool stations FAQ Which inserts fit this corner tool head? The head accepts LNHU 1306 indexable inserts and is specified for compatibility with inserts from Walter and similar suppliers. What is the shank diameter needed for mounting? The tool head requires a 22 mm shank for correct mounting and stable engagement in the toolholder. Which screw and key are used for clamping the insert? Clamping uses an M4x10 Torx screw; the corresponding key size is T15. What are the main dimensions and weight of the unit? Key dimensions are 63 mm diameter, 40 mm overall length, and a mass of 0.628 kg. Is the cutting edge geometry suitable for shoulder and corner turning? Yes, the 90° cutting angle is intended for accurate shoulder and corner turning operations using LNHU 1306 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a stable 90° cutting geometry with a secure Torx clamping system, this angle tool head delivers repeatable shoulder turning with VCGT 1604 indexable inserts. The compact 22 mm shank and 63 mm head diameter provide the rigidity required for consistent results and reduced vibration. Order the tool directly via Metav Werkzeuge or consult their specialists for application guidance. Angle Tool Head (Eckmesserkopf) for VCGT 1604 Indexable Inserts — 90° cutting, 22 mm shank (Teknik Cutting Tools) The Angle Tool Head is a precision turning head engineered for VCGT 1604 indexable inserts, optimised for reliable shoulder turning and fast, secure insert clamping Compatible with VCGT 1604 indexable inserts 90° cutting angle for precise shoulder turning 22 mm shank diameter for stable toolholder fit Torx M4x10 clamping with T15 key for secure fixing Consistent shoulder cuts through rigid geometry The head’s 90° cutting angle creates a defined cutting plane that supports consistent shoulder finishes and dimensional repeatability. Built with a 63 mm head diameter and a compact overall length of 52 mm, the design reduces free overhang and vibration, which translates into improved surface quality and fewer reworks. The result is a measurable contribution to process reliability: stable cutting geometry helps maintain cycle times and aids predictable tool life when paired with standard VCGT 1604 indexable inserts. Secure clamping for quick changeovers and low downtime Clamping is executed with an M4x10 Torx screw and a T15 key, delivering reliable fixation that withstands intermittent cutting forces. The 22 mm shank ensures consistent seating in conventional toolholders, while the head’s mass (approx. 0.538 kg) contributes to damping under load. Together these features simplify insert changes and maintenance routines, reducing machine downtime and keeping setup procedures straightforward for workshop staff and technicians. Simplified tooling and flexible workshop use Designed to fit common turning setups, the head accepts widely used indexable inserts and integrates smoothly into existing tooling families. The compact dimensions and standard clamping method reduce the need for special adapters, helping to consolidate inventory and streamline tool selection across turning applications. This compatibility supports a pragmatic approach to tooling management, allowing planners to rely on a small set of versatile components rather than a broad range of bespoke holders. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools angle tool head into the production line — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: T502TM Manufacturer: Teknik Makina Designation: Eckmesserkopf For inserts: for VCGT 1604 Indexable Inserts Facts Shank diameter: 22 mm Head diameter: 63 mm Overall length: 52 mm Weight: 0.538 kg Cutting angle: 90° Number of cutting edges: 5 Special features Torx screw: M4x10 Torx key size: T15 Compatible with VCGT 1604 indexable inserts FAQ What insert type does this turning head accept? The angle tool head accepts VCGT 1604 indexable inserts and is designed to secure them reliably for shoulder turning and facing tasks. How is the insert fixed in the holder? Fixing is performed with an M4x10 Torx screw using a T15 key to ensure secure clamping during operation. Which shank size is required for the toolholder? The head has a 22 mm shank, suitable for toolholders that accept that diameter and providing stable seating for reduced vibration. Is the head suitable for heavy interrupted cuts? The head’s rigid geometry and mass (approx. 0.538 kg) are intended to increase stability; suitability for interrupted cuts depends on machine setup and cutting data when using the VCGT 1604 inserts. What are the key dimensions to check before ordering? Essential dimensions include the 22 mm shank diameter, 63 mm head diameter and 52 mm overall length; the SKU for reference is T502TM from Teknik Cutting Tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of 63 mm diameter rigidity, a precise 90° cutting angle and fast insert changes for uninterrupted turning operations; order the corner tool head directly via Metav Werkzeuge or contact our consultants for tailored advice. Corner tool head for WNEX 0806 indexable inserts — 63 mm, L40 mm (Teknik Makina) Corner tool head for WNEX 0806 indexable inserts is a compact, high-stability turning head engineered for corner cutting and finishing tasks in professional turning centres and workshop lathes. 63 mm diameter for enhanced rigidity Compatible with WNEX 0806 inserts YG‑1 Compact 40 mm overall length Torx T15 screw with M4x10 fixing Consistent accuracy through reduced overhang and rigid geometry The 63 mm body diameter combined with a 90° cutting angle ensures stable cutting conditions and reduces tool deflection during corner turning operations. The increased cross-section provides improved damping and rigidity compared with smaller heads, which translates into repeatable dimensional accuracy and a cleaner surface finish on each workpiece. As a result, cycle times remain predictable and scrap rates are minimised, supporting efficient production planning and process reliability. Quick insert changes and secure clamping to lower downtime Designed for WNEX 0806 indexable inserts, the head accepts inserts from the YG‑1 range and uses a Torx fastening system (T15) with an M4x10 fixing screw for secure seating. The Torx drive prevents cam‑out and allows precise torque application, so insert seating is consistent and service intervals are shortened. This combination of compatibility and dependable clamping supports faster tool changes and reduces non‑productive time on the shop floor. Compact design that fits tight setups without compromising strength With an overall length of L40 mm and a mass of 0.451 kg, the head keeps the centre of mass close to the spindle, lowering the effective overhang and the risk of vibration in constrained setups. The compact footprint is particularly beneficial for multi‑tool turrets and small lathes where space is limited but machining stability remains critical. The design therefore supports both high‑precision turning and robust everyday use in industrial environments. For reliable corner turning with minimal downtime, speak to Metav Werkzeuge about the Teknik Makina corner tool head (SKU T772TM) — our specialists in Emmerich can advise on compatibility and procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: T772TM Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.451 kg Cutting edges: 6 Cutting angle: 90° Special features For WNEX 0806 indexable inserts Compatible insert maker: YG‑1 Torx drive: T15 Fixing screw: M4x10 FAQ Is this head compatible with WNEX 0806 indexable inserts? Yes. The corner tool head T772TM is specifically designed for WNEX 0806 indexable inserts and accepts inserts from the YG‑1 range. What fastening system does the head use for insert clamping? Insert clamping is secured with a Torx T15 drive and an M4x10 screw for consistent seating and reliable torque transmission. Is the head suitable for machines with limited turret space? The compact L40 mm length and reduced overhang make the head suitable for turrets and small lathes where space is restricted while maintaining machining stability. How many indexed cutting edges are available on the head? The tool head provides six cutting edges, enabling multiple repositions of the insert before replacement. What is the weight of the tool head and how does this affect stability? Weight is 0.451 kg; the modest mass and short projection reduce vibration and improve stiffness for precise turning performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact 22 mm shank and a precise 90° cutting angle for rigid, repeatable turning operations; the robust clamping with an M4x12.5 Torx screw minimises vibration and tool change time. Order the component directly via Metav Werkzeuge or ask the consultants for application guidance. Corner tool head T842TM by Teknik Makina — 22 mm shank, 90° cutting angle Corner tool head T842TM for XNEX 0806 indexable inserts, designed for rigid external and internal turning applications Compact 22 mm shank diameter for high rigidity Fits XNEX 0806 indexable inserts 90° cutting angle for precise corner geometries Compatible with SECO and WINSTAR inserts Delivering rigidity and consistent cutting performance The compact 22 mm shank and stout head diameter create a stable interface between machine and cutting edge, reducing micro‑vibration and improving surface finish. The 90° cutting angle is engineered for reliable corner turning and shoulder work, enabling consistent geometry on repeated parts. A secure clamping concept with an M4x12.5 Torx screw (Torx key T15) ensures the insert is held firmly, which translates into longer insert life and lower scrap rates. The result is measurable production efficiency and repeatability, especially where tight tolerances are required. Fast setup and broad insert compatibility to cut downtime Designed for XNEX 0806 indexable inserts, the holder accepts widely used formats from SECO and WINSTAR, reducing the need for special stocking and simplifying tool management. The tool head’s overall compactness (63 mm head diameter, 45 mm overall length) supports close‑quarters operations without sacrificing stiffness, so changeovers are quicker and set‑up times fall. This compatibility supports lean workshop logistics and helps maintain a continuous machining flow with fewer interruptions. Practical workshop benefits and maintenance clarity At approximately 0.49 kg, the unit is manageable for rapid tool changes while remaining robust enough for industrial use. The simple Torx fastening system requires only a T15 key, allowing maintenance staff to perform secure re‑clamping quickly and safely. Clear mechanical design reduces hidden maintenance steps: fewer adjustments mean predictable performance over many cycles. Where technical details are needed for CAM setup or tool library entries, the clear dimensional profile and standardised interface speed integration into existing processes. For tailored advice on integrating the Teknik Makina T842TM corner tool head into specific turning operations or to request procurement via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and ordering assistance. Technical data Article number: T842TM Manufacturer: Teknik Makina Designation: Corner tool head for XNEX 0806 indexable inserts Torx screw: M4x12.5 Torx key required: T15 Compatible with: SECO, WINSTAR Core dimensions Shank diameter: 22 mm Head diameter: 63 mm Overall length: 45 mm Weight: 0.49 kg Cutting angle: 90° Cutting edges: 6 Special features Fits XNEX 0806 indexable inserts Compatibility with major insert brands SECO and WINSTAR Secure clamping with M4x12.5 Torx screw Compact design for close‑up turning operations FAQ Which inserts fit this tool head? The corner tool head accepts XNEX 0806 indexable inserts and is compatible with inserts from SECO and WINSTAR; the holder is designed to accommodate the standard insert geometry for that size. What fastening hardware is used for the insert? Insert clamping is achieved with an M4x12.5 Torx screw; a T15 Torx key is required for secure tightening and routine maintenance. Is the holder suitable for shoulder turning and external profiles? The 90° cutting angle and compact head geometry make the holder well suited to shoulder work and external corner turning where precise 90° forms are required. How does the shank diameter affect machining stability? A 22 mm shank provides a rigid connection to the tool post or turret, reducing vibration and improving surface finish and dimensional repeatability. Can existing SECO inserts be used without modification? Yes; existing SECO inserts in the XNEX 0806 format can be used directly, supporting quick changeover and simplified tooling stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid turning solution with 63 mm diameter and internal coolant for reliable chip control and repeatable square-shoulder results; the combination of precision mounting, compatibility with XNEX 0806 indexable inserts and concise overall length ensures minimal overhang for stable cutting. Order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head T842-1TM – 63 mm, internal coolant by Teknik Makina The corner tool head designed for XNEX 0806 indexable inserts, optimised for compact turning operations and secure internal coolant supply on the tool shank 63 mm diameter for compact tool setups Internal coolant for improved chip control Compatible with XNEX 0806 SECO inserts Robust 90° cutting angle for square shoulders Rigidity and geometry for consistent shoulder turning The compact, short design delivers a rigid tool mounting that cuts vibration and improves surface finish on square shoulders. Built with a 63 mm diameter and 45 mm overall length, this head reduces cantilevered mass and the chance of chatter during heavy engagement. The defined 90° cutting angle creates true square shoulders without excessive manual rework, while the moderate mass (approx. 0.491 kg) contributes to stable dynamics on conventional and CNC lathes. These mechanical advantages directly reduce cycle time and scrap rates in high-precision turning tasks. Internal coolant for thermal control and chip evacuation Integrated internal coolant channels direct the coolant close to the cutting edge, lowering temperature at the tool–workpiece interface and supporting longer insert life. By flushing chips away from the cutting zone the system limits built-up edge and promotes consistent material removal rates, especially in interrupted cuts or semi-finish operations. For workshops unfamiliar with through-tool cooling: this means fewer tool changes and more predictable tolerances across component batches, translating into measurable savings in process stability. Standardised fixing and maintenance for quick service Assembly uses industry-standard fasteners allowing rapid insert changes and straightforward maintenance. The head accepts an M4x12.5 Torx screw (Torx key T15) for secure clamping of inserts, supporting common workshop procedures and toolroom toolkits. Compatibility with XNEX 0806 indexable inserts, including those from SECO, simplifies stocking and replacement. The concise form factor and conventional fixing method make the head suitable for both experienced operators and teams transitioning to higher-volume production. Proven brand supply and practical workshop benefits Produced by Teknik Makina, this tool head combines focused engineering with compatibility for widely used insert systems, enabling seamless integration into existing tooling systems. The reduced overhang, coolant provision and standardised clamping contribute to consistent part quality and lower rework. Trust in a durable component that supports concise tool inventories and fast turnaround — a practical choice for job shops and production lines that require dependable, repeatable results. For procurement or technical clarification regarding the Teknik Makina corner tool head T842-1TM, contact Metav Werkzeuge in Emmerich for local stock information and application advice via info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: T842-1TM Diameter: 63 mm Overall length: 45 mm Weight: 0.491 kg Manufacturer: Teknik Makina Inner coolant: yes For indexable inserts: XNEX 0806 Compatible insert maker: SECO Cutting edges: 6 Cutting angle: 90° Torx key: T15 Torx screw: M4x12.5 Core figures Diameter: 63 mm Length: 45 mm Weight: 0.491 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant for directed flushing Compatible with XNEX 0806 indexable inserts Standard Torx fastening (T15 / M4x12.5) Compact design for reduced overhang FAQ What inserts fits this tool head? The head is designed for XNEX 0806 indexable inserts and is compatible with inserts from SECO, making insert sourcing straightforward for standard turning applications. Is there internal coolant and how does it help? Yes, the tool head features internal coolant channels that direct coolant to the cutting zone, reducing temperature, improving chip evacuation and extending insert life. What is the correct fastening hardware for insert clamping? Clamping uses a Torx screw M4x12.5 tightened with a T15 key, following common workshop torque recommendations for secure and repeatable clamping. Can this head produce true 90° shoulders on parts? The geometry provides a 90° cutting angle suited to square-shoulder turning; reduced overhang and rigid mounting aid in achieving consistent shoulder quality. What is the product SKU for ordering or spare parts? The product is listed as T842-1TM, which should be referenced for orders and when requesting specific technical details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise 90° cutting angle together with a secure 22 mm shank for stable, repeatable shoulder turning and minimal setup time; order the T340TM directly via Metav Werkzeuge or request application advice from our consultants. 90° Angle Tool Head T340TM — for SPMG 0904 Indexable Inserts (Teknik Makina) A robust 90° angle tool head designed for turning operations with SPMG 0904 indexable inserts, suitable for CNC lathes and turning centres where repeatability and secure clamping matter 90° cutting angle for precise shoulder turns Compatible with SPMG 0904 indexable inserts 22 mm shank diameter for secure clamping Torx screw M3.5x8.5 with T15 key Achieve consistent shoulder and corner turning with minimal rework The T340TM angle tool head combines a defined 90° cutting angle with a compact profile to deliver consistent shoulder cuts and accurate corner geometry. Its configuration for SPMG 0904 indexable inserts ensures that each insert seat engages the workpiece with a predictable cutting geometry, reducing scrap and rework. The 22 mm shank provides a firm mechanical coupling to the toolpost or turret, improving vibration damping and part finish. For machining cells where cycle time and first-pass yield are priorities, this head supports shorter setup checks and a steadier production flow. Fast insert changes and secure fastening for uninterrupted production Maintenance and throughput benefit from practical fastening: the head uses a Torx screw M3.5x8.5 (T15) for reliable clamp force and simple serviceability. The secure screw and compact design help keep changeovers swift and safe, lowering downtime between inserts. Compatibility with inserts from Taegutec broadens sourcing options and enables economical stocking of SPMG 0904 plates. The assembly weight of 0.362 kg and optimised geometry contribute to balanced dynamics in rotary applications, supporting consistent tool life and predictable replacement intervals. Straightforward integration into existing turning stations With a 63 mm head diameter and an overall length of 45 mm, the unit fits into tight tool pockets and allows clearance for adjacent tooling. The standardised 22 mm mounting reduces the need for special adaptors on common turrets and toolblocks, easing integration into both retrofit and new installations. Material compatibility and machining parameters depend on the chosen insert grade; the head itself is specified to accept the SPMG 0904 interface, so pairing with the correct insert geometry yields the expected cutting performance and chip control. If adaptation to a specific machine or process is required, technical data and drawings can be provided. Contact Metav Werkzeuge for availability and fitment guidance on the T340TM 90° angle tool head from Teknik Makina — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and delivery from Emmerich Technical data Article number: T340TM Manufacturer: Teknik Makina Product: 90° angle tool head for SPMG 0904 indexable inserts Compatible inserts: SPMG 0904 Compatible insert manufacturer: Taegutec Core specifications Diameter: 63 mm Overall length: 45 mm Shank diameter (d): 22 mm Weight: 0.362 kg Cutting angle: 90° Cutting edges: 6 Features & compatibility Torx screw M3.5x8.5 Torx key: T15 SKU: T340TM Brand: Teknik Makina FAQ Which inserts fit this angle tool head? The T340TM accepts SPMG 0904 indexable inserts; it is specified for that insert form and is compatible with Taegutec SPMG 0904 plates. What shank size is required on the turret or toolpost? A 22 mm shank diameter is required for correct seating and clamping of the T340TM in standard toolholders. Which fastener and key are needed for insert clamping? Insert clamping uses a Torx screw M3.5x8.5 and a T15 key for tightening and service. What are the main dimensions to check for machine compatibility? Key dimensions are head diameter 63 mm, overall length 45 mm, and shank diameter 22 mm; confirm these against the turret pocket and neighbouring tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining a 90° cutting angle, secure 22 mm shank clamping and verified compatibility with APMT 1604 indexable inserts, the Corner Tool Head T245TM delivers steady profiling and repeatable results for medium-duty turning and milling operations. Order directly via Metav Werkzeuge or consult Metav’s specialists for integration advice and delivery from Emmerich. Corner Tool Head T245TM — Indexable insert holder for APMT 1604, 90° cutting angle (Teknik Makina) The Corner Tool Head T245TM is a compact indexable insert holder designed for precise profiling and turning tasks with APMT 1604 inserts, suitable for workshops and production lines requiring stable edge positioning. Compatible with APMT 1604 inserts 90° cutting angle for reliable profiling 22 mm shank diameter for stable clamping Includes M4x10 Torx fastening screw Stable clamping for consistent cut quality The compact tool head offers a rigid mounting interface with a 22 mm shank, a 63 mm diameter seating and an overall length of 45 mm, which together reduce deflection and vibration during interrupted cuts. The 90° cutting angle ensures a predictable chip flow and allows precise profiling in contour work. These mechanical characteristics convert into a measurable improvement in surface finish and dimensional repeatability, making the tool head a rational choice where process stability and machining consistency are priorities. Fast insert changes and efficient tool handling Compatibility with APMT 1604 indexable inserts—including those from Korloy—means insert inventory can be standardised across a shop floor, lowering handling complexity. Replacement is secured by an M4x10 Torx screw tightened with a T15 key, enabling quick and safe insert indexing; the unit supports six cutting edges, optimising tool utilisation before replacement. The design reduces downtime and streamlines maintenance, yielding an expedient cost‑effectiveness argument for production environments. Compact design that integrates reliably into the workflow Weighing 0.578 kg and engineered for straightforward mounting, the tool head balances mass for stability without adding unnecessary bulk to the turret or holder assembly. The product classification (eClass 21181015) and supplied file references support integration into procurement and tool management systems. Sourcing via Metav offers a dependable supply channel and workshop‑oriented aftercare, backing the technical benefits with secure logistics and trusted availability from Emmerich. Contact Metav Werkzeuge for tailored technical advice and reliable supply of the Corner Tool Head T245TM compatible with APMT 1604 indexable inserts Technical data SKU: T245TM Brand: Teknik Makina Product: Corner Tool Head for APMT 1604 Indexable Inserts Compatible insert manufacturer: Korloy Fastening screw: M4x10 Torx Torx key size: T15 Numbers / Core technical data Diameter: 63 mm Overall length: 45 mm Shank diameter: 22 mm Weight: 0.578 kg Cutting angle: 90° Cutting edges: 6 Special features Indexable insert holder for APMT 1604 Compatible with Korloy inserts Quick insert change with M4x10 screw eClass: 21181015 Files: 62de7efabd24461b3d5f7a98, 62de7e760f56dbb4de4dbf1f FAQ Which inserts fit the holder? The Corner Tool Head T245TM accepts APMT 1604 indexable inserts; Korloy‑type inserts are explicitly compatible. What fastening hardware is used for insert clamping? Insert clamping on the T245TM uses an M4x10 Torx screw, tightened with a T15 key for secure seating. Is the tool head suitable for profiling on hardened materials? The product specification indicates mechanical suitability for profiling tasks; selection of the correct APMT 1604 grade determines capability on hardened materials. How compact is the tool for turret integration? With an overall length of 45 mm and a 22 mm shank, the tool head is designed for compact turret fittings while maintaining rigidity. What are the handling and storage recommendations? Standard workshop practice applies: store inserts and the Corner Tool Head T245TM in protective cases, inspect the M4x10 screw for torque compliance and keep contact surfaces free of debris. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the 63 mm diameter and internal coolant for improved chip evacuation and consistent surface finish; the compact design and precise insert clamping deliver reliable cycle times. Order directly via Metav Werkzeuge or consult our specialists for application support. Corner tool head T502-1TM — 63 mm diameter, internal coolant, for VCGT 1604 indexable inserts (Teknik Makina) The Corner tool head T502-1TM is a compact indexable insert holder engineered for turning operations using VCGT 1604 inserts; it offers coolant-through functionality to support chip control and prolong insert life. 63 mm diameter for high rigidity Internal coolant for improved chip evacuation Compatible with VCGT 1604 inserts 52 mm overall length for compact mounting Robust rigidity for consistent cutting results The compact head geometry combines a 63 mm diameter with a 52 mm overall length to provide axial stiffness that reduces vibration under load. This structural stability is particularly beneficial in medium- to high-feed turning operations where repeatable dimensional control is required. The specified 43° cutting angle supports favourable cutting forces and predictable chip flow, and the provision of five cutting edges on compatible inserts yields an efficient cost-per-edge balance when indexed and replaced. Coolant-through design that improves tool life and surface finish Equipped with internal coolant, the tool head directs cutting fluid close to the cutting zone, which enhances cooling and lubrication at the insert edge. As a result, heat is managed more effectively, wear mechanisms are slowed and surface integrity is improved. The coolant capability is especially useful for continuous production runs where thermal stability reduces rework and downtime. Insert retention uses a Torx T15 drive and an M4x10 fixing screw for secure clamping and straightforward maintenance. Easy integration and predictable handling for production shops The tool head is supplied as a ready-to-fit turning solution, compatible with standard holders designed for indexable inserts, and labelled under SKU T502-1TM for clear inventory management. With a mass of 0.538 kg, the component balances robustness with manageable inertia for most CNC spindle and turret configurations. The precision of the clamping interface and the coolant provision mean set-up times are reduced and process stability is increased, supporting continuous, high-quality output in workshop and production environments. Contact Metav Werkzeuge for tailored application advice and fast supply from Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: T502-1TM Type: Corner tool head Manufacturer: Teknik Makina eClass: 21181015 Facts Diameter: 63 mm Overall length: 52 mm Weight: 0.538 kg Cutting angle: 43° Number of cutting edges: 5 Compatible inserts: VCGT 1604 Fixing screw: M4x10 Torx key: T15 Special features Internal coolant (coolant-through) Indexable insert holder design Compact geometry for reduced overhang Brand: Teknik Makina FAQ Can this tool head be used with standard VCGT 1604 inserts? Yes. The corner tool head is designed specifically for VCGT 1604 indexable inserts and provides the correct pocket geometry and clamping to secure those inserts. Does the tool head feature internal coolant delivery? Yes. The T502-1TM includes internal coolant to direct fluid to the cutting edge, enhancing cooling, lubrication and chip control. Which fixing hardware and key are required for insert clamping? Insert clamping uses an M4x10 Torx screw tightened with a T15 Torx key, which allows safe and repeatable clamping. What are the key dimensions and the SKU for ordering? Key dimensions are 63 mm diameter and 52 mm overall length; the article is listed under SKU T502-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact solution for precise 90° turning with direct compatibility for WNGX 0806 indexable inserts and a secure M5x12 Torx clamping system. The combination of a robust 22 mm shank, a 63 mm head diameter and a short overall length supports efficient tool changeovers and stable cutting performance. Order the component directly via Metav Werkzeuge or consult their specialists for compatibility advice. Corner tool head – 90° turning head for WNGX 0806 indexable inserts (Teknik Makina) Corner tool head for right‑angle turning applications, built for secure clamping of WNGX 0806 indexable inserts in workshop and production environments 90° cutting angle for square turning Compatible with WNGX 0806 indexable inserts 22 mm shank for secure holder fit M5x12 Torx clamp screw, T20 key required Precise right‑angle turning with proven insert compatibility The 90° cutting angle makes this turning head well suited to square‑shoulder operations and interrupted cuts where repeatable datum faces are required. Designed specifically for WNGX 0806 indexable inserts, the head reduces setup complexity by matching a widely used insert geometry; this supports predictable cutting geometry and consistent workpiece results. The compact design keeps the cutting point close to the clamping plane, which helps to lower deflection and maintain surface finish during shorter overhang operations. Fast, reliable clamping for quick insert changes Clamping is achieved with an M5x12 Torx screw tightened with a T20 key, providing a straightforward and secure method to retain the insert. The fastening arrangement allows fast replacement of worn inserts and ensures repeatable seating, which reduces downtime and machining interruptions. The 22 mm shank interfaces with standard toolholders, offering a rigid connection that contributes to vibration damping and extended insert life when compared with less stable assemblies. Workshop‑friendly dimensions and straightforward stock management With a head diameter of 63 mm, an overall length of 40 mm and a net weight of 0.47 kg, the tool head is compact without sacrificing stability. The specification lists six cutting edges, reflecting the design intent for insert orientation and multi‑edge utilisation where applicable. Standardised mounting and insert type mean fewer SKUs to manage in the tool cabinet, simplifying procurement and spare‑parts logistics while maintaining production readiness. For ordering or precise compatibility checks contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 — Metav’s specialists can advise on integration into existing tool setups and supply logistics Technical data SKU: T776TM Manufacturer: Teknik Makina Compatible inserts: WNGX 0806 Compatible insert manufacturer: Korloy Clamp screw: M5x12 (Torx) Core dimensions Diameter: 63 mm Shank / mounting diameter: 22 mm Overall length: 40 mm Weight: 0.47 kg Cutting angle: 90° Number of cutting edges: 6 Features Designed for WNGX 0806 indexable inserts M5x12 Torx clamp screw, T20 key required Compact construction for reduced overhang FAQ How is the insert secured in the tool head? The insert is secured with an M5x12 Torx screw tightened using a T20 key; this arrangement on the corner tool head (SKU T776TM) provides reliable clamping and repeatable seating. Which indexable inserts fit this turning head? The turning head is designed for WNGX 0806 indexable inserts and is specified for compatibility with Korloy WNGX 0806 geometry. What are the key dimensions to check for machine compatibility? Important dimensions are a 22 mm shank, a head diameter of 63 mm, an overall length of 40 mm and a 90° cutting angle; the head weight is 0.47 kg. Is this head suitable for shoulder turning and facing operations? Yes — the 90° geometry and compact construction make the head appropriate for shoulder turning and similar right‑angle operations where a rigid mounting is available. What toolholder interface is required for installation? A toolholder or turret accepting a 22 mm shank/mounting diameter is required; the design aims to provide a rigid connection for standard lathe tool posts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 90° indexable cutter head with a Ø63 mm body and six cutting edges for continuous, stable machining; its 22 mm mounting bore and Torx fastening ensure fast, repeatable set-up. Order the tool directly via Metav Werkzeuge or consult the team for technical integration. Angle Head T522TM — 90° indexable cutter head, Ø63 mm by Teknik Makina Angle Head T522TM is a compact indexable cutter head designed for precision shoulder and face operations using XOMX 1806 inserts 90° cutting angle for square shoulder milling Ø63 mm body diameter for stable engagement Compatible with XOMX 1806 inserts (SECO) 22 mm bore for secure toolholder mounting Reliable rigidity for consistent surface quality The T522TM angle head combines a Ø63 mm body with a short 45 mm overall length, providing a rigid interface that reduces chatter and promotes consistent surface finish. The 22 mm bore ensures positive seating in common toolholders, while the Torx screw M4.5x11 with a T15 key secures the insert seats quickly and precisely. This construction reduces downtime by cutting set-up variability and supports repeatable results in serial production. Fast indexable insert changes and continuous machining Designed for six cutting positions, the head accepts XOMX 1806 indexable inserts, allowing multiple indexing cycles before replacement. Compatibility with SECO-type inserts broadens tooling choices and streamlines procurement. The arrangement of the six cutting edges supports uninterrupted cutting and efficient chip evacuation, which together improve material removal rates and lower per-part tool costs without sacrificing process stability. Compact design for straightforward integration Weighing 0.55 kg and with a compact footprint, the head integrates easily into existing tool magazines and multi-spindle setups. The combination of a standard 22 mm mount and a secure Torx fastening system simplifies retrofits and saves machine set-up time. Built by Teknik Cutting Tools, the component is aimed at workshops and small production lines that demand robust performance from a small, easy-to-handle cutter head. Practical benefits for procurement and workshop planning Specifying the T522TM supports predictable maintenance cycles and straightforward spare-part planning thanks to its standardised insert format and common fastener type. The use of familiar indexable inserts reduces inventory complexity, while the durable body and repeatable clamping reduce the frequency of rebalancing and inspection intervals—benefits that translate into lower total cost of ownership across production runs. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Cutting Tools Angle Head T522TM for reliable 90° machining — local supply from Emmerich with expert support Technical Data SKU: T522TM Brand: Teknik Makina Article designation: Angle head for XOMX 1806 indexable inserts (for XOMX 1806 Indexable Inserts) Compatible insert manufacturer: SECO Specifications Diameter: 63 mm Overall length: 45 mm Bore (mount): 22 mm Cutting angle: 90° Number of cutting edges: 6 Weight: 0.55 kg Torx screw: M4.5x11 Torx key: T15 Special features Compatible inserts: XOMX 1806 Designed for indexable cutter applications Compact, rigid design for stable engagement FAQ What inserts fit this angle head? The T522TM angle head is specified for XOMX 1806 indexable inserts and lists compatibility with SECO insert types for versatile procurement options. How is the insert secured in the cutter head? Inserts are clamped using a Torx screw M4.5x11, tightened with a T15 key, providing a secure and repeatable fastening method. Which machines can accept the T522TM? The head mounts to toolholders with a 22 mm bore; the compact 45 mm overall length and 0.55 kg mass make it suitable for many milling and multi-spindle tool magazine configurations. How many cutting edges are available before replacement? The cutter head is arranged for six cutting edges, allowing multiple indexing events to extend tool life between full replacements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust stability, reliable internal coolant and broad compatibility with XEKT 1904 indexable inserts to maintain steady cycle times. Order directly via Metav Werkzeuge or consult our specialists for application checks and availability. Corner Tool Head XEKT 1904 — 63 mm, internal coolant (Teknik Makina) The Corner Tool Head XEKT 1904 is a compact turning head designed for precision profiling and coolant-fed cutting operations with XEKT 1904 indexable inserts. 63 mm diameter for robust stability Internal coolant for improved tool life Four cutting edges for extended runtime Compatible with Korloy XEKT 1904 inserts Consistent cutting performance with coolant-fed design The head delivers predictable results thanks to its internal coolant channel and sturdy 63 mm diameter, which together reduce thermal build-up and improve chip evacuation during interrupted cuts. Built for indexable tooling systems, the head accepts standard XEKT 1904 indexable inserts, enabling fast insert changes and consistent cutting geometry. For production environments where repeatability matters, the coolant-fed arrangement helps to preserve edge life and minimise rework. Practical workshop handling and quick insert changes Maintenance and tool-changing are simplified: the unit uses a Torx T15 interface and M4x8.5 fastening, allowing secure attachment and straightforward servicing with common workshop tools. With a compact 50 mm overall length and a mass of 0.562 kg, the head balances rigidity and accessibility at the tool post, supporting reliable toolholder dynamics without excessive overhang. The design of the clamping area and the four available cutting edges support economical index rotations and reduced downtime. Engineered for integration and dependable supply Manufactured by Teknik Makina, this corner head is specified for machining tasks where a fixed 90° cutting angle provides clean shoulder and profile work. The combination of compatibility with Korloy inserts and a standardised interface means straightforward integration into existing turning toolholder setups. Metav Werkzeuge supplies the component from Emmerich with traceable stock handling and technical advice, backing up the tool with established distribution and parts support. Contact Metav Werkzeuge to confirm compatibility with the intended applications and to arrange supply from Emmerich for this Teknik Makina corner tool head SKU T367TM Technical data Article number: T367TM Product: Corner tool head for XEKT 1904 indexable inserts Manufacturer: Teknik Makina Label: 63 mm corner tool head XEKT 1904 L50 mm with internal coolant Core specifications Diameter: 63 mm Overall length: 50 mm Weight: 0.562 kg Cutting edges: 4 Cutting angle: 90° Features and compatibility Internal coolant: yes Compatible inserts: XEKT 1904 Compatible insert maker: Korloy Torx key: T15 Torx screw: M4x8.5 Eclass: 21181015 SKU / UID: T367TM FAQ Which indexable inserts fit this head? The head is designed for XEKT 1904 indexable inserts; compatibility with Korloy-manufactured XEKT 1904 inserts is confirmed for SKU T367TM. Does the tool head provide internal cooling? Yes — the corner head features internal coolant to support cooling at the cutting zone and improve tool life under elevated thermal loads. How many cutting edges and what cutting angle are provided? The head offers four cutting edges and a fixed 90° cutting angle for profile and shoulder turning operations. Which fastening tools and screws are required for insert clamping? Fastening uses a Torx T15 key and M4x8.5 screws for secure insert fixation and routine maintenance. What are the main dimensions and mass of the head? Key measurements: 63 mm diameter, 50 mm overall length, weight 0.562 kg; supplied as SKU T367TM by Teknik Makina. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 63 mm diameter stability and built‑in internal coolant for improved chip control and longer insert life; compatible with ADMT 1606 indexable inserts for reliable square‑shoulder turning. Order directly via Metav Werkzeuge or contact our consultants for tailored specification support. Corner tool head for ADMT 1606 indexable inserts — 63 mm with internal coolant | Teknik Makina Corner tool head for ADMT 1606 indexable inserts designed for stable square‑shoulder turning with integrated coolant supply for improved process reliability. 63 mm diameter for robust stability Internal coolant for improved chip evacuation Compatible with ADMT 1606 indexable inserts 90° cutting angle for square shoulder turning Rigidity and repeatable precision for shoulder turning A larger tool head diameter delivers improved stiffness at the cutting zone; the 63 mm diameter reduces deflection and vibration during heavy shoulder cuts, which directly improves surface finish and dimensional repeatability. The 90° cutting angle is engineered for square‑shoulder turning tasks where perpendicular faces and precise shoulders are required. With a compact overall length of 45 mm and a mass that contributes to stability, the arrangement minimises chatter and supports consistent cycle times on production runs. Controlled coolant flow to protect inserts and maintain productivity The integrated internal coolant channel supplies lubricant and cooling directly to the cutting edge, lowering tool temperatures and flushing chips away from the insert zone. This targeted cooling extends insert life and reduces thermal distortion of the workpiece, which is especially valuable during prolonged cuts or when machining materials that generate heat rapidly. The result is fewer unscheduled indexings and a more economical use of indexable inserts over time. Secure clamping and standardised assembly for quick changeovers Designed for straightforward mounting, the head uses an M4x10 torx screw secured with a T15 key, ensuring repeatable clamping torque and fast insert changes. The component offers six cutting edges, allowing for efficient tool rotation strategies and minimised downtime. Compatibility with widely used indexable inserts — notably ADMT 1606 — and a match to inserts from established manufacturers supports inventory rationalisation and easier procurement within the tooling ecosystem. Practical workshop benefits and suitable applications This compact head is suited to general purpose turning where square shoulders, grooves and precise shoulder heights are required; it performs reliably across common ferrous and non‑ferrous tasks when combined with the correct insert grade. Its design helps reduce setup complexity and supports batch production by delivering consistent results part after part. For operations seeking a balance of rigidity, coolant management and compatibility with standard inserts, the head offers a pragmatic solution that integrates into existing tooling systems. For personalised advice on the Teknik Makina corner tool head and supply coordination from Metav Werkzeuge in Emmerich, please contact Metav Werkzeuge by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data SKU: T354-1TM Product: Corner tool head Label: 63 mm corner tool head ADMT 1606 L45 mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.578 kg Cutting edges: 6 Cutting angle: 90° Special features Internal coolant: Yes Compatible with ADMT 1606 indexable inserts Compatible insert manufacturer: Walter Torx key: T15 Torx screw: M4x10 eCl@ss: 21181015 FAQ What inserts fit this tool head? The head is designed for ADMT 1606 indexable inserts and is compatible with inserts from Walter that follow this designation. Does the tool head provide internal coolant? Yes, the component features internal coolant to deliver lubricant directly to the cutting zone and aid chip evacuation. Which fastener and key are required for mounting? Mounting uses an M4x10 torx screw tightened with a T15 torx key for repeatable clamping. Is the head suitable for heavy shoulder cuts? With its 63 mm diameter and robust mass, the head supports stable shoulder turning and reduces vibration during demanding cuts. What is the SKU for ordering spare parts or replacements? Order or reference SKU T354-1TM when enquiring about this Teknik Makina corner tool head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com