Gibt es einen Hahn und Kolb Online Shop?

Precise 90° cutting, integrated internal coolant and a compact 63 mm diameter combine to deliver consistently accurate square‑shoulder machining; the construction also reduces set‑up time and extends insert life. Order the tool directly via Metav Werkzeuge or ask our consultants for tailored specification support. Corner tool head T399-1TM — 63 mm, internal coolant (Teknik Makina) The corner tool head T399-1TM is a compact 90° indexable‑insert holder designed for square‑shoulder turning with 3PKT 1505 inserts in industrial turning applications Compact 63 mm diameter head Integrated internal coolant Compatible with 3PKT 1505 inserts (Taegutec) 90° cutting angle for square shoulders Consistent square‑shoulder accuracy and process stability The combination of a 63 mm body and a 90° cutting angle provides precise shoulder formation and repeatable geometry in series production. The head accepts indexable inserts, allowing quick replacement without regrinding, which reduces downtime and keeps cycle times predictable. The T399-1TM is engineered for rigidity to limit deflection under load, so surface tolerances and dimensional stability remain consistent across batches. Coolant‑through design for longer insert life An internal coolant channel directs cutting fluid close to the cutting edge, improving heat dissipation and chip evacuation. This controlled cooling reduces thermal wear on inserts and helps maintain cutting-edge geometry for longer, which translates into fewer insert changes and lower tooling costs over time. Improved chip control also supports better surface finish, particularly in interrupted cuts and heavy‑duty operations. Proven compatibility and straightforward fastening The holder is specified for 3PKT 1505 indexable inserts and tailored to fit inserts from Taegutec, simplifying logistics and ensuring interchangeability with common insert stocks. Fastening uses a standard Torx T15 interface with M4x10 screws, enabling secure clamping with widely available tools and minimising maintenance time. These standardised components help keep workshop routines efficient and predictable. Compact form factor for easy integration on turrets With a 40 mm overall length and a mass of 0.491 kg, this head offers a compact footprint while delivering the rigidity required for industrial turning applications. The reduced projection helps lower bending moments at the toolholder, improving stability during heavy cuts and enabling easier integration into crowded turret spaces. The compact design supports faster set‑ups and better access to tight workpiece features without sacrificing performance. For tailored technical advice on Teknik Makina's corner tool head and reliable supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for specification support and availability Technical Data Article number: T399-1TM SKU: T399-1TM Product: Corner tool head Description: for 3PKT 1505 Indexable Inserts Manufacturer: Teknik Makina Label: 63mm Eckmesserkopf 3PKT 1505 L40mm mit Innenkühlung UID: T399-1TM ECLASS: 21181015 Core specifications Diameter: 63 mm Overall length: 40 mm Weight: 0.491 kg Cutting angle: 90° Cutting edges: 6 Design & special features Internal coolant: true Compatible inserts: 3PKT 1505 (Taegutec) Torx key: T15 Torx screw: M4x10 FAQ Which inserts are compatible with this tool head? The T399-1TM is specified for 3PKT 1505 indexable inserts and is compatible with inserts from Taegutec. Is coolant available through the tool head? Yes, the corner tool head features internal coolant that feeds the cutting zone to improve cooling and chip evacuation. What cutting geometry is this head designed for? The holder has a 90° cutting angle, making it suitable for square‑shoulder turning and operations that require precise shoulder faces. What fastening hardware is required for the inserts? Insert clamping uses Torx T15 screws of size M4x10, providing standardised and secure fastening. What are the main dimensions and weight of the head? The tool head has a diameter of 63 mm, overall length of 40 mm and a weight of 0.491 kg; SKU T399-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust 90° indexable head with 22 mm shank and 63 mm diameter combines secure clamping and fast insert changes for efficient shoulder turning operations; order directly via Metav Werkzeuge or consult the technical team for application support. Eckmesserkopf T598TM — 90° tool head for APMT 0602 indexable inserts (Teknik Makina) The Eckmesserkopf is a compact 90° turning head designed to accept industry-standard APMT 0602 indexable inserts, primarily intended for precise shoulder and face-turning tasks in production and workshop environments. 90° cutting geometry for shoulder turning 22 mm shank for rigid machine mounting Compatible with Korloy APMT 0602 inserts Torx T6 fixation with M2x4.2 screw Faster set-up and reduced tool-change time with rigid mounting The T598TM indexable head offers a compact design that shortens preparation time and increases uptime. With a 22 mm shank and a well-proportioned body, the unit provides a stable mounting interface that limits vibration and improves repeatability between setups. The head’s 90° orientation is engineered to simplify clamping for shoulder cuts, while the use of indexable inserts allows worn cutting edges to be replaced in seconds rather than replacing whole tools. This combination yields measurable improvements in process efficiency and consistency for batch production. Clear compatibility with standard inserts for predictable results Acceptance of APMT 0602 inserts—compatible with major suppliers such as Korloy—means tool selection and stocking can be standardised across the shop floor. The head uses a secure Torx T6 retention system and an M2x4.2 screw to ensure the insert is positively located and retained under cutting forces. Because the interface aligns with common insert geometries, engineers benefit from predictable tool behaviour and straightforward regrinding or replacement procedures, reducing inventory complexity and easing procurement. Geometry engineered for precise shoulder and face turning The 90° tool orientation provides a consistent cutting approach for shoulders and facing operations. The head’s external 63 mm diameter and 40 mm overall height create a compact envelope that improves access in tight fixtures while maintaining sufficient mass to dampen chatter. Where accurate right-angle features are required, the geometry supports repeatable results and simplifies process planning; the modular nature of the tool holder supports quick adaptation to different inserts and cutting strategies without long downtimes. Workshop integration, maintenance and documentation benefits Suppliers and maintenance teams will value the familiar fastening method and the clear specification of components. The T598TM is simple to service: the Torx T6 key and the defined M2x4.2 screw make replacement procedures straightforward, and the standardised insert size reduces handling errors. Documentation and tool lists can reference the T598TM SKU to ensure correct procurement and traceability. For production planners, the combination of standard inserts and robust mounting contributes to easier spare-part logistics and predictable machining costs. Contact Metav Werkzeuge for application advice and to order the Teknik Makina T598TM 90° indexable head with 22 mm shank — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for specification support and rapid supply from Emmerich Technical data Article number: T598TM Brand: Teknik Makina Designation: Eckmesserkopf for 90° APMT 0602 Indexable Inserts Compatible insert type: APMT 0602 Compatible insert manufacturer: Korloy Facts Shank diameter (mm): 22 Overall diameter (mm): 63 Overall height (mm): 40 Retention screw: M2x4,2 Torx key size: T6 Cutting indicator: 14 Special features 90° turning geometry Indexable insert system Secure Torx retention Compact external diameter for tight fixtures FAQ What insert type fits this turning head? The Teknik Makina T598TM accepts APMT 0602 indexable inserts and is compatible with inserts from manufacturers such as Korloy. Which shank size is required for machine mounting? The head requires a 22 mm shank mounting interface; ensure the machine turret or holder accepts this diameter for correct installation. How is the insert secured in the head? An M2x4.2 screw together with a Torx T6 key secures the insert, providing positive location and retention during cutting. Is the 90° geometry suitable for shoulder turning on small parts? Yes, the 90° orientation is specifically designed for shoulder and face-turning work and is compact enough for operations in confined fixtures. Can the product be identified for ordering by SKU? The product is available under SKU T598TM, which should be used for procurement and spare-part lists. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 90° cutting geometry, secure 22 mm shank clamping and proven compatibility with LOEX 1207 inserts to improve process stability and reduce setup time; order directly via Metav Werkzeuge or ask the consultants for configuration support. Corner tool head T587TM — 90° turning head for LOEX 1207 indexable inserts, 22 mm shank (Teknik Makina) A robust corner tool head engineered for 90° corner turning and profiling operations with LOEX 1207 indexable inserts; ideal for precision turning applications where repeatable geometry and secure clamping matter 90° geometry for precise corner turning Compatible with LOEX 1207 indexable inserts 22 mm diameter shank for secure clamping M4x10 Torx clamping screw with T15 key Precision geometry that keeps cycle times predictable The tool head offers a defined 90° cutting geometry that maintains consistent corner profiles across batch production. Built to accept LOEX 1207 indexable inserts, the design reduces the need for multiple tool changes and supports predictable chip control. By combining a solid mounting interface with a compact head diameter, the component delivers repeatable contact conditions which help to reduce variability and scrap rates. The focus is on performance and process reliability rather than speculative improvements, so the main measurable benefit is a reduction in rework due to consistent tool presentation. Secure mounting and clear clamping specification for reliable setups Mounting is straightforward thanks to the 22 mm shank and a Torx clamping solution specified as M4x10 with a T15 key. This straightforward specification allows secure clamping with minimal risk of loosening under normal turning loads and supports fast tool changes at the turret. The reduced assembly complexity shortens setup intervals and helps maintain spindle balance. The compact head—63 mm diameter with a 40 mm overall height—and a weight of 0.6 kg contribute to stable dynamics on the machine, limiting vibration that can affect surface finish and tool life. Designed for workshop efficiency and compatibility with common insert systems Compatibility with inserts from established suppliers is integral to predictable procurement and tool management. The head is tailored for LOEX 1207 inserts and listed as fitting inserts manufactured by SECO, enabling easy sourcing of cutting grades and geometries for different materials. With six cutting edges available from the insert configuration, the system supports economical edge indexing and extended service intervals. The straightforward specification reduces inventory complexity while enabling maintenance teams to plan insert changes and stock relevant grades for ferrous and non-ferrous turning tasks. Contact Metav Werkzeuge for expert advice on the Teknik Cutting Tools corner tool head T587TM and to confirm the best insert grade and clamping configuration for reliable production performance Technical data Article number: T587TM Manufacturer: Teknik Makina ECLASS: 21181015 Suitable for indexable inserts: LOEX 1207 Insert manufacturer fit: SECO Facts Shank diameter (d): 22 mm Weight: 0.6 kg Head diameter: 63 mm Overall height: 40 mm Cutting edges: 6 Cutting angle: 90° Torx screw: M4x10 (T15) Features Corner tool head design 90° cutting geometry Compatible with LOEX 1207 inserts Torx clamping with T15 key 22 mm mount for turret holders FAQ Which indexable inserts fit this tool head? The corner tool head T587TM is designed for LOEX 1207 indexable inserts and is compatible with inserts from SECO specified for that series. What is the shank diameter and how does it affect clamping? The tool head uses a 22 mm shank diameter; this dimension provides a secure mounting interface for standard turret holders and contributes to repeatable clamping. How many cutting edges are available per insert configuration? The configured insert set-up provides six cutting edges, enabling economical indexing and longer periods between full insert changes. What type of clamping screw and key are required? Clamping is secured with an M4x10 Torx screw and requires a T15 key for tightening and loosening. Is the head suitable for precision corner turning in production environments? Yes — the compact dimensions, 90° geometry and compatibility with LOEX 1207 inserts make the T587TM suitable for consistent corner turning in industrial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 90° cutting geometry and secure 22 mm shank mounting for consistent shoulder turning; compatible with Korloy KRLY indexable inserts and supported by Metav Werkzeuge for reliable supply and advice. Corner Turning Head (Eckmesserkopf) — 90° head for WNGX 0403 indexable inserts, Teknik Makina The Corner Turning Head (Eckmesserkopf) is a 90° turning head designed for shoulder and face turning with WNGX 0403 indexable inserts, offering a compact, robust solution for production lathes and toolrooms 90° cutting geometry for precise shoulders Compatibility with WNGX 0403 indexable inserts Secure 22 mm shank for stable mounting Torx T8 screw fixation, maintenance-friendly Precision shoulder turning with consistent geometry The turning head delivers a defined 90° cutting geometry, enabling reproducible shoulder and facing operations on external profiles. This geometry reduces the need for secondary finishing and supports consistent tolerances across batches. By using standard indexable inserts, the system separates cutting edge wear from the holder; worn inserts can be replaced quickly, maintaining cycle times and reducing downtime. The controlled geometry is especially valuable where repeatable right-angle faces are required. Secure mounting and quick insert changeover Designed with a 22 mm shank, the toolholder provides a rigid interface to the turret or toolpost, which helps to reduce vibration and improves surface finish when machining steel and aluminium. The insert is clamped with a Torx T8 drive and an M2.5x5.5 screw, enabling reliable fixation and straightforward service using common workshop tools. Using standardised fixing hardware shortens maintenance intervals and lowers the risk of improper clamping during tool changes. Built for production: compatibility and material handling The head is specified for WNGX 0403 indexable inserts and listed for use with KRLY inserts from Korloy, which are widely available and engineered for varied cutting conditions. The combination of the holder’s geometry and standardised insert form allows selection of grades tailored to the workpiece material, whether general-purpose steels or softer non-ferrous metals. Selecting the correct insert grade extends tool life and improves economy per produced part. Operational benefits and workshop integration With a compact diameter of 63 mm and an overall height of 40 mm, the head fits tight tool stations without compromising access to the workpiece. The design balances rigidity and accessibility, permitting close-in operations on complex workpieces. Because insert replacement is quick and the holder uses common screw sizes, the component supports lean toolroom practices and predictable machine uptime, contributing to measurable productivity improvements. Speak to Metav Werkzeuge about integrating Teknik Makina’s 90° corner turning head into production — technical consultants available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: T694TM Name: Eckmesserkopf for 90° WNGX 0403 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall height: 40 mm Shank diameter (aufnahme): 22 mm Cutting angle: 90° Cutting edges (schneiden): 10 Torx key size: T8 Special features Compatible insert form: WNGX 0403 Recommended insert type: KRLY Compatible inserts manufacturer: Korloy Fixing screw: M2,5x5,5 FAQ Which indexable inserts fit this turning head? The turning head is specified for WNGX 0403 indexable inserts; Korloy KRLY inserts are listed as compatible for straightforward replacement and grade selection. Is the holder suitable for production turrets with 22 mm tooling? Yes, the holder uses a 22 mm shank diameter intended for secure clamping in turrets and toolposts designed for that size. What fixation hardware is required for the insert? The insert is secured with an M2.5x5.5 Torx screw and requires a Torx T8 key for installation and removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable 63 mm head diameter, precise 90° cutting geometry and built‑in internal coolant to improve chip control and extend insert life; order the holder directly via Metav Werkzeuge or consult our specialists for application support. Corner turning head for ADKT 1505 indexable inserts — 63 mm, L45 (Teknik Makina) A corner turning head engineered for accurate 90° shoulder machining, equipped with internal coolant and designed to accept ADKT 1505 indexable inserts for reliable workshop performance 63 mm head diameter Internal coolant feed 90° cutting geometry ISCAR-compatible ADKT 1505 inserts Repeatable 90° shoulders for precision parts The robust head design ensures consistent 90° cutting geometry, translating into predictable shoulder faces and minimal rework. With a 63 mm diameter and overall length of 45 mm, the toolhead offers the rigidity required for small to medium turning setups while keeping overhang low. The combination of a solid tool body and defined cutting geometry reduces vibration and helps maintain surface finish and dimensional tolerances across series production. Coolant-fed chip control that increases productivity Integrated internal coolant supplies cutting fluid directly to the cutting zone, improving chip breakage and evacuation and lowering cutting temperatures. This focused cooling reduces built‑up edge and promotes longer insert life, which in turn reduces downtime for insert changes. Mechanical fastening via an M4x10 clamping screw (Torx T15) provides secure seating of the insert and repeatable clamp force for consistent process stability. Flexible compatibility for workshop integration Compatibility with ADKT 1505 inserts and proven fit for ISCAR grades makes the head a practical choice for mixed fleets and retrofit operations. The compact mass of 0.565 kg and the option of six indexed cutting positions offer versatility for varied turning tasks while keeping tool inventory simple. Where quick changeovers and tool reliability are priorities, this holder supports fast insert replacement and straightforward maintenance routines. Contact Metav Werkzeuge for application advice on the Teknik Makina corner turning head — reliable supply from Emmerich and technical consultation available at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: T204-1TM UID: T204-1TM ECLASS: 21181015 Manufacturer: Teknik Makina Dimensions & weight Head diameter: 63 mm Overall length: 45 mm Weight: 0.565 kg Cutting angle: 90° Cutting positions: 6 Features & compatibility Internal coolant: yes Insert family: ADKT 1505 Compatible insert supplier: ISCAR Clamping screw: M4x10 Torx key: T15 Product type: Corner turning head Label: 63mm Eckmesserkopf ADKT 1505 L45mm mit Innenkühlung FAQ What insert type does this head accept? The corner turning head is designed for ADKT 1505 indexable inserts, compatible with common ISCAR grades. Does the holder provide coolant to the insert? Yes, the holder features internal coolant to feed the cutting zone directly and improve chip control. What clamping hardware is used for the inserts? Inserts are secured with an M4x10 clamping screw tightened with a T15 Torx key for repeatable clamping. Is this head suitable for series production? The combination of a 63 mm diameter body, low overhang and coolant feed makes the head well suited to series and batch turning operations. What is the SKU for ordering? The SKU for this corner turning head is T204-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid tool head that combines 63 mm diameter stability with internal coolant for reliable chip control; the compatibility with ADKT 1706 indexable inserts ensures quick insert changes and consistent surface finish. Order or request advice via Metav Werkzeuge for seamless integration into existing turning stations. Corner turning head T591TM — 63 mm, internal coolant (Teknik Makina) The Corner Turning Head T591TM is a compact, rigid tool head designed for precision shoulder and profile turning with ADKT 1706 indexable inserts. Internal coolant for efficient chip evacuation 63 mm diameter for high rigidity Compatible with ADKT 1706 indexable inserts Torx T15 screw system M4x10 Stable support for repeatable shoulder turning The corner turning head offers a stiff, vibration‑resistant solution for demanding turning tasks thanks to its 63 mm body diameter and a true 90° cutting angle. These design choices reduce tool deflection and improve surface finish, particularly on short, precise shoulder cuts. The compact L40 mm overall length keeps the centre of mass close to the spindle, which improves runout behaviour and contributes to consistent tolerances across series production. For workshop planners and turning centres seeking short set‑up times and reproducible results, the engineered geometry of this tool head reduces scrap rates and part rework. Integrated coolant and proven insert compatibility for process reliability Equipped with internal coolant, the head directs cutting fluid close to the tool‑cutting edge, improving chip control and prolonging insert life under interrupted or heavy cuts. The holder is specified for ADKT 1706 indexable inserts and is compatible with inserts from Korloy, enabling quick insert replacement and broad grade selection for varied materials. The head accommodates six cutting positions and secures inserts with an M4x10 Torx screw tightened with a T15 key, a common torque interface that simplifies maintenance and spare part logistics on the shop floor. Practical handling, maintenance and integration benefits Weighing just 0.455 kg, the head is easy to handle during tool changes while remaining rigid in operation, and its standard Torx fastening aids rapid changeovers. The configuration supports modular tool systems and is suited for CNC lathes where space and stability are critical. Routine checks focus on the coolant channel and screw torque; replacing the Torx screw is straightforward thanks to the standard T15 drive. The compact design and standardised interfaces make the component a pragmatic addition for workshops aiming to reduce tool inventory complexity while maintaining high turning performance. For reliable integration of the Teknik Makina T591TM corner turning head and assistance with selecting compatible inserts, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — to discuss delivery and tool system planning. Technical Data SKU: T591TM Product: Corner turning head Manufacturer: Teknik Makina Label: 63mm Eckmesserkopf ADKT 1706 L40mm mit Innenkühlung Core measurements Diameter: 63 mm Overall length: 40 mm Weight: 0.455 kg Cutting edges: 6 Cutting angle: 90° Special features Internal coolant For ADKT 1706 indexable inserts Compatible with Korloy inserts Torx key: T15 Torx screw: M4x10 SKU: T591TM FAQ Which inserts fit this turning head? The head is designed for ADKT 1706 indexable inserts; Korloy‑type inserts are listed as compatible with the T591TM. Does the head provide coolant to the cutting edge? Yes, the T591TM features internal coolant that delivers fluid close to the insert for improved chip control. What fastening hardware is required for insert clamping? Inserts are secured with an M4x10 Torx screw, using a T15 key for torque application. Is the head suitable for short overhang, high‑rigidity setups? The 63 mm diameter and L40 mm overall length make the tool head particularly suitable for short overhang applications where rigidity is essential. What are the key dimensions and weight to consider for tool setup? Key figures: diameter 63 mm, overall length 40 mm, weight 0.455 kg for dynamic balancing and fixture planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine a 90° cutting angle, a 22 mm shank and ISCAR-compatible ANKX insert mounting to achieve consistent corner turning and rapid indexable insert changes; order the Corner Tool Head T444TM directly via Metav Werkzeuge or consult their specialists for application advice. Corner Tool Head T444TM — indexable corner tool head for ANKX 0706 inserts, 90° cutting angle (Teknik Makina) The Corner Tool Head T444TM is a compact indexable tool head for precision 90° turning and grooving operations, designed for use with ANKX 0706 indexable inserts and compatible with ANKX 1710 plates. Compact 63 mm head diameter 90° cutting angle for square turning 22 mm shank diameter for standard mounts Compatible with ANKX 0706 / ANKX 1710 inserts Reliable 90° machining with standardised insert mounting The Corner Tool Head T444TM delivers a dedicated solution for square and corner turning where consistent geometry matters. Fitted for ANKX 0706 indexable inserts, the head guarantees repeatable cutting geometry thanks to a defined 90° cutting angle. This reduces set-up variance in serial production. The standardised insert interface, compatible with ISCAR plates, simplifies replacement and lowers process variation compared with bespoke tooling. Robust attachment and quick serviceability minimise downtime Engineered with a 22 mm shank and a compact overall length of 45 mm, the head balances rigidity and access in confined tool setups. Fast, secure clamping is achieved with the specified M5x12 Torx screw driven by a T20 key, enabling rapid insert changes and reliable seating. With a head diameter of 63 mm and a mass of 0.573 kg, the unit provides sufficient mass for stable cutting while remaining easy to handle during tool changes. Designed for efficient workshop integration and repeatable results The tool head’s compatibility with both ANKX 0706 and ANKX 1710 insert formats supports a streamlined tooling inventory and interchangeability across lathes and turning centres. The configuration supports multiple indexed cutting edges — noted as 5 cutting edges on the head — which facilitates continued operation by allowing rapid re-indexing or replacement of worn inserts. Clear mechanical standards mean easier planning for toolholders and consistent cycle times on the shop floor. Practical application and selection guidance for engineers and buyers Suitable for production environments that require repeatability and swift retooling, this indexable corner head is a pragmatic choice for workshop managers and purchasing teams seeking proven compatibility with ISCAR insert systems. The concise specification set — 22 mm shank, 63 mm diameter, 45 mm total length, M5x12 fastening — enables quick assessment against existing toolholders and machine spindle clearances, supporting straightforward procurement decisions. For precision 90° turning with ANKX 0706 inserts, contact Metav Werkzeuge for ordering and technical guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Corner Tool Head T444TM and application suitability. Technical Data SKU: T444TM Manufacturer: Teknik Makina Product name: Corner Tool Head (Eckmesserkopf) For inserts: for ANKX 0706 Indexable Inserts / ANKX 1710 Compatible insert manufacturer: ISCAR Facts Head diameter: 63 mm Shank diameter (aufnahme): 22 mm Total length: 45 mm Cutting angle: 90° Weight: 0.573 kg Fastening screw: M5x12 Torx key size: T20 Number of cutting edges: 5 Special features Indexable corner tool head design Standard Torx fastening for quick insert changes Compact format for confined tool setups Compatibility with ANKX insert range Balanced mass for stable turning FAQ What inserts fit this tool head? The Corner Tool Head T444TM is specified for ANKX 0706 indexable inserts and is listed as compatible with ANKX 1710 plates; compatibility with ISCAR-style ANKX inserts is indicated. Which fastening hardware is required for insert clamping? Insert clamping uses an M5x12 Torx screw driven with a T20 Torx key as specified for the T444TM head. What are the key dimensions to check for machine compatibility? Relevant dimensions for the T444TM are a head diameter of 63 mm, a shank diameter of 22 mm and a total length of 45 mm; these determine holder fit and clearance. How many indexed edges does the head support? The tool head is provided with five indexed cutting edges on the assembly, enabling re-indexing or replacement strategies to extend operating cycles. Is the tool head suitable for confined setups on small lathes? The compact overall length and 22 mm shank of the T444TM make it suitable for many confined toolpost arrangements, subject to machine-specific clearance checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert compatibility, effective internal coolant delivery and a compact 63 mm design for consistent turning results in series production; order the component directly via Metav Werkzeuge or consult our specialists for machining optimisation. Eckmesserkopf — 63 mm corner tool head with internal coolant for ANKX 1607 indexable inserts Eckmesserkopf as a compact, right-angled tool head for medium-duty turning operations, designed to accept ANKX 1607 indexable inserts and to support controlled coolant delivery close to the cutting edge 63 mm diameter for stable support Internal coolant for improved chip control Compatible with ANKX 1607 indexable inserts Torx T15 clamping for secure tool fixing Precision compatibility for reliable production The compact corner tool head is engineered for consistent fitment with ANKX 1607 indexable inserts and is compatible with insert manufacturers XTC and Gesac, which simplifies procurement and inventory. With an outer diameter of 63 mm and an overall length of L40 mm, the assembly is balanced to provide stable cutting conditions; the modest weight 0.462 kg contributes to reduced centrifugal forces and predictable dynamic behaviour in multi-tool turrets. This design focus translates into fewer interruptions for rework and a smoother production flow for batch and single-part manufacturing. Improved cutting performance through internal cooling Equipped with internal coolant, the turning head channels coolant directly to the insert seat, which supports efficient chip evacuation and localised heat dissipation. As a result, contact temperatures at the cutting edge are lowered and tool wear is slowed, enabling longer indexes per insert and more consistent surface finish on workpieces. The unit’s 90° cutting orientation offers straightforward geometry for facing and shoulder turning tasks, while the coolant routing reduces built-up edge formation and dampens thermal distortion during longer cuts. Robust clamping and simple maintenance Clamping is effected with a Torx T15 interface for the fastening screws, ensuring repeatable torque and secure insert retention during interrupted cuts. The tool accepts a 22 mm drive connection (aufnahme 22 mm), which is a common size for turret adaptors and reduces the need for additional adaptors in many lathe set-ups. The compact form and accessible fastening make insert changes and visual inspections fast, keeping machine downtime to a minimum. The component’s specifications are designed to support routine workshop maintenance procedures without specialised tooling. Optimised for turning applications and versatile material use With five cutting edges, the head supports multiple indexing positions, allowing economical use of each insert before replacement. The combination of a sturdy 63 mm body, internal coolant and secure clamping makes it well suited to general turning, facing and finish-pass operations across a variety of materials where ANKX 1607 inserts are recommended. As a product from Teknik Makina, the component integrates into standard tool systems to deliver repeatable machining quality in both small-scale workshops and larger production environments. For tailored machining advice on the Teknik Makina corner tool head with internal coolant and to arrange supply via Metav Werkzeuge in Emmerich, contact Metav Werkzeuge for application recommendations and procurement coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T172-1TM SKU: T172-1TM Brand: Teknik Makina Product type: Corner tool head Facts Diameter: 63 mm Overall length: 40 mm Shank connection: 22 mm Weight: 0.462 kg Cutting angle: 90° Cutting edges: 5 Special features Internal coolant For ANKX 1607 indexable inserts Compatible with XTC and Gesac inserts Torx T15 clamping FAQ What inserts fit this corner tool head? The corner tool head is designed for ANKX 1607 indexable inserts and is compatible with inserts from XTC and Gesac. How does the internal coolant improve machining? Internal coolant directs fluid to the cutting zone, improving chip control and reducing heat at the edge, which in turn can extend insert life and improve surface finish when using the head. What is the required key for insert clamping? Clamping screws are operated with a Torx T15 key to ensure reliable torque and secure retention of the insert. Which operations is this head best suited for? The 90° orientation and robust 63 mm body make it suitable for facing, shoulder turning and finishing passes where ANKX 1607 inserts are appropriate. Is this head compatible with common turret adaptors? The tool head accepts a 22 mm connection, which matches many standard turret and toolholder interfaces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact 90° corner turning solution that combines repeatable accuracy with rapid insert changes; the robust 22 mm shank ensures stable clamping and reduced vibration for cleaner cuts. Order the Eckmesserkopf directly via Metav Werkzeuge or contact our consultants for specification support. Eckmesserkopf T178TM — Corner turning head for APXT 1003 indexable inserts, 90° cutting angle (Teknik Makina) The Eckmesserkopf T178TM is a purpose-built corner turning head engineered for precise external turning and profiling using APKT/APXT 1003 indexable inserts in standard turning stations. 90° cutting angle for precise corner turning Compatible with APKT 1003 / APXT 1003 inserts 22 mm shank diameter for stable clamping Torx M2.5 fastening; T8 key for quick assembly Consistent corner accuracy for repeatable parts The 90° cutting geometry delivers a defined cutting datum that simplifies setup and reduces machining variation. With a clear 90° cutting angle, the tool head produces reproducible corner radii and shoulder faces, which supports tighter tolerances and less post-process rework. The controlled geometry is especially beneficial in batch production where consistent part-to-part accuracy reduces scrap rates and improves downstream assembly quality. Robust clamping and rapid insert changes to cut downtime Designed with a 22 mm shank for secure mounting and a Torx fastening system, the head uses a Torx M2.5 screw tightened with a T8 key to hold the insert firmly. This combination provides stable clamping that minimises vibration and tool deflection, improving surface finish and tool life. The compatibility with APKT 1003 / APXT 1003 insert formats means insert replacement is swift and standardised, turning maintenance windows into brief service intervals and supporting a more efficient production rhythm. Compact dimensions that integrate easily into workshop setups With a 63 mm diameter, overall length 40 mm and a mass of 0.543 kg, the turning head balances rigidity with a compact footprint for tighter toolpost arrangements. The moderate weight and compact size ease handling during tool changes and reduce cantilever loads on the turret, helping to preserve machine accuracy. Compatible with Korloy insert geometries, the tool head integrates with common indexable insert portfolios, allowing workshop standardisation and simplified stocking of spare parts. For reliable corner turning with Teknik Cutting Tools components, contact Metav Werkzeuge for personalised technical advice and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T178TM Manufacturer: Teknik Makina Product name: Eckmesserkopf For inserts: for APXT 1003 Indexable Inserts Key measurements Diameter: 63 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.543 kg Cutting angle: 90° Cutting edges: 7 Features & compatibility Compatible with APKT 1003 indexable inserts Suitable for Korloy insert geometries Torx screw M2.5x5.5; Torx key T8 90° corner turning head design FAQ Which indexable inserts fit this turning head? The Eckmesserkopf T178TM is designed for APKT 1003 / APXT 1003 insert formats and is compatible with Korloy geometries that follow the same seat and dimension standards. What fastening hardware is required for assembly? Assembly uses a Torx M2.5x5.5 screw, which is tightened with a T8 key to secure the insert in the seat. What are the main dimensions to consider for turret planning? Key values: diameter 63 mm, overall length 40 mm and shank diameter 22 mm; the head weight is 0.543 kg, useful for assessing cantilever effects. For which machining tasks is this head suitable? The head is intended for 90° corner turning and external profiling where a defined shoulder or corner is required, offering repeatable geometry for series production. Can inserts from other manufacturers be used? Inserts that conform to the APKT 1003 / APXT 1003 geometry and seating will be compatible; check the insert seat dimensions and manufacturer recommendations before use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from secure clamping, proven compatibility with APKT 1604 indexable inserts and a compact 22 mm shank that fits standard toolholders — ideal for stable facing and profiling operations. Order via Metav Werkzeuge or request application advice from our consultants for seamless integration into the production process. Corner turning head — indexable insert holder for APKT 1604, 22 mm shank (Teknik Makina) The Corner turning head is a compact indexable insert holder designed for precise facing, profiling and finishing with APKT 1604 inserts in CNC turning operations Secure clamping with M4x10 Torx screw Compatible with APKT 1604 indexable inserts 22 mm shank for standard toolholders Ø63 mm head diameter for high stability Consistent clamping for repeatable turning quality A robust clamping concept ensures consistent results across batches. The head secures inserts with an M4x10 Torx screw, requiring a T15 key for tightening, which reduces the risk of insert movement under load. This mechanical reliability translates into fewer interruptions for re‑zeroing and a more predictable production flow. The design reduces vibration at the cutting zone and supports consistent surface finish and dimensional control when using APKT 1604 indexable inserts. Seamless integration into common toolholder systems The compact 22 mm shank allows straightforward mounting in standard toolholders, making retrofitting and tool changeover efficient. Compatibility with inserts from established suppliers such as YG‑1 simplifies procurement and inventory management. The combination of a standard shank diameter and familiar insert format enables rapid adoption in workshops and small production cells without the need for special adapters. Stable cutting performance in confined set‑ups With a head diameter of Ø63 mm and a clearly defined overall length of 45 mm, the component is engineered to deliver a stable tool overhang and controlled cutting geometry. Its modest mass of 0.507 kg helps to balance toolpost dynamics while keeping the system responsive. These attributes are particularly beneficial for short‑run finishing and profiling where rigidity and positional certainty determine part quality. Designed for practical workshop use and predictable maintenance The holder accepts APKT 1604 inserts and is specified for five cutting edges where applicable, enabling economical use of indexable grades. Clear specification of fastening and shank dimensions supports fast tool preparation and documented tool lists for NC programmes. For application advice or technical drawings relating to installation and cutting data, Metav Werkzeuge provides direct consultancy and delivery from its Emmerich hub For tailored application advice and prompt supply from Metav Werkzeuge in Emmerich, contact our specialists about the Teknik Cutting Tools Corner turning head (SKU T768TM) via e‑mail or phone Technical Data Article number: T768TM Brand: Teknik Makina Product: Corner turning head for APKT 1604 indexable inserts Fixing screw: M4x10 Required Torx key: T15 Facts Head diameter: 63 mm Shank (clamping) diameter: 22 mm Overall length: 45 mm Weight: 0.507 kg Number of cutting edges (where applicable): 5 Special features Compatible inserts: APKT 1604 Suitable insert manufacturer: YG‑1 For use in standard toolholders with 22 mm shank SKU: T768TM Brand origin: Teknik Makina FAQ What inserts fit this turning head? The turning head accepts APKT 1604 indexable inserts; compatible grades from YG‑1 are commonly used for general turning and finishing operations. Which toolholder bore is required to mount the head? A standard toolholder able to accept a 22 mm shank is required for correct mounting and clamping of the head. What fastener is used to secure the insert? Insert clamping uses an M4x10 Torx screw; tightening is performed with a T15 Torx key. Is this component suitable for heavy roughing operations? The component is designed for stable facing and profiling; for heavy roughing the suitability depends on cutting parameters, insert grade and machine rigidity — consult Metav Werkzeuge for specific process recommendations. Which SKU should be referenced when ordering or requesting data? Reference SKU T768TM when enquiring about drawings, availability or application support for this corner turning head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision, a compact 63 mm diameter, and internal coolant for stable, repeatable machining results; order the angle head directly via Metav Werkzeuge or contact our consultants for integration advice. Angle head for LNGX 1307 indexable inserts — 63 mm, internal coolant The Angle head for LNGX 1307 indexable inserts is a compact, rigid tool head designed for 90° shoulder and face machining, offering built-in coolant feed and secure Torx fastening for consistent CNC performance. Compact 63 mm diameter head Internal coolant for controlled chip flow Compatible with LNGX 1307 inserts Secure T15 Torx fastening Consistent 90° machining with measurable stability The compact 63 mm tool geometry delivers a predictable, repeatable cutting footprint that supports accurate shoulder and face operations. Built around a fixed 90° cutting angle, the head minimises rework and helps maintain tight tolerances during serial production. The integration of a coolant channel directly into the head reduces thermal variation, which in turn limits dimensional drift and improves tool life. This combination of features supports a reliable process chain and contributes to reduced cycle-time variability on CNC machines. Quick integration and robust fastening reduce downtime Designed for straightforward installation, the head uses an M4x11 Torx screw driven with a T15 torx key for secure clamping of the insert seat. The modest 45 mm overall length and a weight of 0.56 kg make handling and balancing simple when fitting to modular toolholders. Compatibility with LNGX 1307 indexable inserts — including those from Walter — ensures parts commonality and fast replacement. The result is less setup time, lower inventory complexity and quicker return to production after maintenance. Controlled coolant and chip management for longer tool life Internal coolant supply focuses cutting fluid at the insert interface to improve lubrication and evacuate chips efficiently, which reduces edge wear and lowers the risk of built-up edge. The head accommodates multiple cutting edges (six-edge configuration) to extend service intervals and offers a compact envelope for operations in restricted tool magazines. Manufactured by Teknik Makina, this tool head is engineered for durable service in industrial environments where consistent chip control and coolant delivery are essential for process stability. For ordering, availability checks or technical integration support for the Teknik Makina angle head (SKU T492-1TM), contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised advice and stock information. Technical data SKU: T492-1TM Name: 63 mm angle head for LNGX 1307 indexable inserts Product type: Angle head ECLASS: 21181015 Measurements Diameter: 63 mm Overall length: 45 mm Weight: 0.56 kg Cutting angle: 90° Features Internal coolant: yes Compatible inserts: LNGX 1307 Compatible insert manufacturer: Walter Cutting edges: 6 Torx key: T15 Torx screw: M4x11 FAQ Which indexable inserts fit this angle head? The angle head is designed for LNGX 1307 indexable inserts; inserts from Walter that match this designation are compatible. Does the head support internal coolant? Yes — the Teknik Makina angle head (SKU T492-1TM) includes an internal coolant channel to direct fluid to the cutting edge. What is the cutting angle and typical application? The head provides a 90° cutting angle, suitable for shoulder and face milling tasks where perpendicular engagement is required. How is the insert secured and which tool is required? Inserts are fastened with an M4x11 Torx screw; assembly and adjustment use a T15 Torx key. What are the key dimensions for mounting and setup? Key dimensions are 63 mm diameter and 45 mm overall length; the head weighs 0.56 kg, aiding in balancing and holder selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 90° cutting angle and the proven compatibility with LNMX 1510 indexable inserts to improve shoulder turning consistency; order the part directly via Metav Werkzeuge or consult our specialists for process integration. Angle Turning Head (T374TM) — 90° tool head for LNMX 1510 indexable inserts by Teknik Makina The Angle Turning Head is a purpose-built 90° cutting head for turning operations, engineered to accept LNMX 1510 indexable inserts and to deliver repeatable shoulder and face turning performance in workshop and production settings. 90° cutting angle for accurate shoulder machining Compatible with LNMX 1510 indexable inserts 22 mm tool shank diameter for secure clamping Torx M4x12.5 screw, T15 drive for quick fastening Stable geometry for repeatable shoulder turning The 90° design provides a defined cutting orientation that reduces operator setup complexity and ensures consistent results across batches. With a focus on repeatable shoulder machining, the geometry minimises deflection and helps maintain dimensional tolerances when producing shoulders and faces. This stability supports faster throughput and lowers rework rates, making the component suitable for series production where process repeatability is critical. Proven compatibility and faster insert changes Designed specifically for the LNMX 1510 family of indexable inserts, the tool head accepts inserts from major manufacturers such as ISCAR, Korloy, LMN and YG‑1. Insert fastening is achieved with a Torx M4x12.5 screw and a T15 drive, enabling reliable clamping and straightforward replacement. The standardised interface reduces inventory complexity and shortens downtime during tool changes, contributing to measurable productivity gains on the shop floor. Secure clamping and vibration control for longer tool life A 22 mm shank diameter and a compact overall form deliver secure clamping in common holders and reduce the risk of chatter. The tool head’s 63 mm diameter and a mass of 0.616 kg balance rigidity with manageable handling for toolsetters. By improving vibration damping and mechanical stability, wear on inserts and the holder interface is reduced, which extends component service life and lowers consumable costs over time. Fit for workshop and production environments The cutting head is suited to both single‑machine shops and automated cells where consistent shoulder geometry is required. Its compatibility with a widely used insert series makes it easy to standardise tooling across machines and suppliers, simplifying procurement and stocking. Paired with Metav Werkzeuge’s quality filter and supply reliability, the component supports a pragmatic approach to precision: accessible, dependable tooling that keeps production moving. Choose the Teknik Makina Angle Turning Head via Metav Werkzeuge for dependable 90° shoulder turning — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T374TM Brand: Teknik Makina Product: Angle Turning Head for LNMX 1510 indexable inserts Numeric data Diameter: 63 mm Shank diameter (aufnahme): 22 mm Overall length: 45 mm Weight: 0.616 kg Cutting angle: 90° Cutting edges: 6 Materials & features Compatible inserts: LNMX 1510 Compatible insert manufacturers: ISCAR, Korloy, LMN, YG‑1 Fastening screw: Torx M4x12.5 (T15) SKU: T374TM FAQ Which inserts fit this tool head? The Angle Turning Head accepts LNMX 1510 indexable inserts; inserts from ISCAR, Korloy, LMN and YG‑1 are compatible with the T374TM interface. Is the 90° angle suitable for shoulder machining? Yes, the 90° cutting angle of the Teknik Makina tool head is optimised for accurate shoulder and face turning applications, providing defined geometry and repeatable results. What fastening system secures the insert? Inserts are secured using a Torx fastening screw (M4x12.5) with a T15 drive, offering reliable clamping and quick insert replacement on the T374TM. Which shank holders are recommended? Holders that accept a 22 mm shank diameter and provide rigid clamping are recommended to exploit the stability and vibration control of this cutting head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise corner cutting geometry, secure Torx fastening and compact dimensions for reliable turning performance and short set-up times. Order the component directly via Metav Werkzeuge or ask our consultants for application advice. Corner tool head T674TM — 90° cutting angle, for LNXT 1306 indexable inserts (Teknik Makina) The Corner tool head is a compact turning head engineered for LNXT 1306 indexable inserts, optimised for accurate corner turning and finishing operations in CNC lathes Corner tool head for LNXT 1306 inserts 90° cutting angle for precise corner cuts 22 mm shank diameter for standard holders Secured with M4x10 Torx screw (T15 key) Stable, repeatable corner turning for shorter cycle times The robust geometry of this turning head ensures stable clamping and consistent chip control during corner operations. A true 90° cutting angle delivers reproducible corner faces and radii, while the substantial 63 mm head diameter contributes to stiffness and reduced vibration. Compatibility with LNXT 1306 indexable inserts (Palbit-compatible) means quick insert changes without special adaptors, helping to keep machine downtime to a minimum and improving overall throughput. Straightforward fitment and secure fastening for workshop efficiency Designed with a 22 mm shank for common toolholders and a captive M4x10 Torx screw (T15), the assembly and insert retention are both rapid and reliable. The head’s 0.604 kg mass reflects a balance between rigidity and manageable handling during tool changes. The single-screw clamping concept reduces set-up complexity and the need for extensive adjustments, which translates into faster tool changeovers and predictable process behaviour on production runs. Clear compatibility and practical maintenance guidance This turning head is specified for the LNXT 1306 insert format and is listed as compatible with Palbit inserts, simplifying procurement and inventory management. The compact 40 mm overall length suits constrained toolpost envelopes while providing sufficient overhang for typical cornering tasks. Routine maintenance is limited to periodic screw torque checks and insert replacement; the use of a standard T15 key reduces the variety of tools required at the machine. Trusted supply from Metav Werkzeuge supports reliable availability and straightforward reordering. Contact Metav Werkzeuge for tailored technical advice and secure procurement of the Teknik Makina Corner tool head; local stock and application support are available from our Emmerich site via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T674TM Manufacturer: Teknik Makina Product: Corner tool head for LNXT 1306 indexable inserts Compatible insert manufacturer: Palbit Core measurements Head diameter: 63 mm Shank / mounting diameter: 22 mm Overall length: 40 mm Weight: 0.604 kg Cutting angle: 90° Number of cutting edges: 6 Design & features Fastening screw: M4x10 Torx Torx key size: T15 Suitable for: LNXT 1306 indexable inserts SKU: T674TM FAQ Which inserts are compatible with this tool head? The corner tool head T674TM is specified for LNXT 1306 indexable inserts and is compatible with Palbit-manufactured inserts in that format. What fastening hardware is required for installation? Installation uses a single M4x10 Torx screw secured with a T15 key; the design allows quick insert clamping and straightforward removal. Is the shank suitable for standard toolholders? Yes — the tool head has a 22 mm shank diameter, making it compatible with standard 22 mm turning toolholders and holders accepting that shank size. What dimensions and weight affect toolholder stability? Key dimensions are 63 mm head diameter and 40 mm overall length; the component weight is 0.604 kg, which together support stiffness for precise corner turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact 63 mm diameter and integrated internal coolant to keep cycle times tight and tool life long; the proven compatibility with R390 11 indexable inserts (Sandvik) ensures straightforward tooling integration. Order or request expert advice directly via Metav Werkzeuge for quick supply and technical clarification. Indexable Turning Head T579-1TM — 63 mm diameter with internal coolant by Teknik Makina The Indexable Turning Head T579-1TM is a compact, precision tool head for external turning operations, designed to accept R390 11 indexable inserts and to deliver reliable shoulder and facing cuts with an integrated coolant feed. *63 mm tool head diameter *Internal coolant supply *Compatible with R390 11 inserts (Sandvik) *90° cutting angle for precise shoulders Designed for short overhang and stable turning The compact design of this turning head, with a short overall length of 40 mm, reduces overhang and improves rigidity for shoulder finishing and heavy cuts. Shorter projection decreases vibration and helps maintain surface quality while increasing allowable cutting parameters. For workshops seeking reliable repeatability, the reduced overhang translates into higher process stability and fewer rework cycles. Coolant-through design that protects the cutting edge An internal coolant channel delivers lubricant and coolant directly to the insert seat, flushing chips away from the cutting zone and supporting consistent tool life. This direct feed method reduces thermal load on the insert, which can extend edge retention and reduce heat-related wear. For operators moving between light and medium turning tasks, the coolant-through arrangement also simplifies chip control and improves surface finish without additional external devices. Broad compatibility and secure clamping Engineered to accept R390 11 indexable inserts from Sandvik, the head provides a 90° cutting geometry optimised for shoulder work and versatile external operations. The clamping hardware uses M2.5x7 Torx screws (Torx T8), ensuring repeatable, secure fixation of each insert. The Ø22 mm mounting bore matches common backplate and holder interfaces, making retrofitting to existing toolholders straightforward and predictable. Practical workshop benefits and serviceability With a nominal mass of 0.503 kg, the assembly is lightweight enough for multi-station turrets yet robust in construction for routine production. The standard Torx interface eases the replacement of fastening screws during index changes, and the geometry of the head minimises set-up time when switching inserts. For plants prioritising uptime, the combination of compact form, coolant supply and standard mount dimensions supports fast changeovers and consistent part quality. Contact Metav Werkzeuge for tailored technical advice and dependable supply of the Teknik Makina T579-1TM indexable turning head; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical Data Article number: T579-1TM Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.503 kg Mounting bore: Ø22 mm Cutting angle: 90° Number of cutting edges: 7 Special features Internal coolant supply For R390 11 indexable inserts Compatible insert manufacturer: Sandvik Torx key: T8 Torx screw: M2.5x7 Product type: Indexable turning head ECLASS: 21181015 FAQ Which insert type fits this turning head? The turning head accepts R390 11 indexable inserts; compatibility is specified for inserts from Sandvik and ensures correct seating and cutting geometry. Is coolant available through the tool body? Yes — the tool head features internal coolant that supplies the cutting zone directly to support chip evacuation and edge life. What mounting interface is required? The head uses a Ø22 mm mounting bore suitable for common backplates and holders that match that diameter. Which fasteners are used for insert clamping? Insert clamping is performed with M2.5x7 Torx screws tightened using a T8 Torx key for repeatable securing. Is the head suitable for shoulder and facing operations? The 90° cutting angle and compact 40 mm overall length make the head particularly suitable for shoulder and facing cuts where rigidity and short overhang are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant and broad compatibility with Sandvik R390 17 inserts for reliable corner turning in small to medium machining centres; order the head directly via Metav Werkzeuge or consult the specialists for application matching. Eckmesserkopf – corner turning head with internal coolant, Ø63 mm, for R390 17 indexable inserts by Teknik Makina The Eckmesserkopf is a compact corner turning head engineered for precision external turning with R390 17 indexable inserts, offering internal coolant and a robust 90° cutting geometry for consistent chip control in batch and series production. 63 mm head diameter Internal coolant for improved chip evacuation Compatible with Sandvik R390 17 inserts Compact overall length L45 mm Precise geometry for consistent turning results The robust 90° cutting geometry and a 63 mm head diameter deliver stable cutting conditions and reduced vibration, especially on medium-duty turning operations. The design accommodates a 22 mm shank for secure mounting, which increases rigidity during external cuts and helps maintain tolerances. The compact L45 mm overall length reduces overhang, supporting repeatable results and longer tool life while the head’s mass of 0.59 kg contributes to controlled dynamics and less chatter on standard lathes. Compatibility and simple maintenance with proven fastening Compatibility with Sandvik R390 17 indexable inserts ensures access to a wide range of grades and chipformers for different materials. The head uses T15 Torx fastening and M3.5 x 8.5 screws for insert clamping, simplifying insert changes and maintenance. The head provides six indexed cutting positions, enabling multiple reindexes before replacement and reducing tooling downtime. Internal coolant feeds directly to the cutting zone, supporting consistent cooling and improved chip evacuation for many workpiece materials. Workflow benefits for the workshop and procurement A compact, coolant-fed indexable head like this reduces setup time and supports faster cycle stability through improved chip control and heat management. The combination of a standard insert form factor and a secure Torx fixing method streamlines stocking and spare-part logistics for toolrooms and production planners. For purchasers seeking dependable supply and concise documentation, Metav’s role as a precision partner ensures straightforward sourcing and reliable delivery from the Emmerich stockholding. For tailored selection and rapid supply from Metav Werkzeuge, request the T408-1TM specification and compatibility advice from Metav Werkzeuge’s specialists via info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical Data Article number: T408-1TM Manufacturer: Teknik Makina Product type: Corner turning head (Eckmesserkopf) Label: 63mm Eckmesserkopf R390 17 L45mm with internal coolant Facts Head diameter: 63 mm Overall length: 45 mm Shank diameter: 22 mm Weight: 0.59 kg Cutting angle: 90° Number of indexed cutting positions: 6 Torx key size: T15 Fastening screw: M3.5 x 8.5 Special features Internal coolant (through-tool coolant) Compatible with R390 17 indexable inserts Intended insert supplier: Sandvik Compact design for reduced overhang Robust 90° cutting geometry FAQ What inserts fit this corner turning head? The Eckmesserkopf is designed for R390 17 indexable inserts and is specified for compatibility with Sandvik insert types; the SKU T408-1TM denotes this configuration. Does the head provide internal coolant? Yes, the tool head features internal coolant feeding to the cutting zone to support chip evacuation and temperature control during turning with R390 17 inserts. Which fastening tools are required for insert changes? Insert clamping uses a T15 Torx key and M3.5 x 8.5 screws as specified for the T408-1TM head. Is the head suitable for short overhang setups? The compact L45 mm overall length and 63 mm body diameter reduce overhang and help achieve stable cutting conditions in short-reach applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, compact tool head with internal coolant and universal compatibility with R390 18 indexable inserts to maintain steady production and minimise downtime; order the component directly via Metav Werkzeuge or consult our specialists for application guidance. Corner turning head with internal coolant — compatible with R390 18 indexable inserts (Teknik Makina) Corner turning head for R390 18 indexable inserts — a compact tool head engineered for precision turning and facing operations on CNC lathes, offering internal coolant and secure Torx clamping for reliable production use. 63 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with R390 18 Sandvik inserts 45 mm overall length with 90° cutting angle Higher throughput through rigid, coolant-fed cutting The robust design of this tool head prioritises cutting stability and consistent cycle times. With a 63 mm diameter and a 90° cutting angle, the head provides a secure platform for heavy shoulder cuts and facing passes, reducing vibration and improving surface finish. The presence of internal coolant directs cutting fluid precisely to the cutting zone, which helps to lengthen insert life and maintain cutting forces within expected limits. This combination of rigidity and targeted cooling enables higher feeds and longer uninterrupted runs, supporting measurable productivity gains in batch production. Proven compatibility and quick, repeatable set-ups Fitting directly to the popular insert family R390 18, the head accepts Sandvik-specified inserts, simplifying tooling procurement and inventory. The compact 45 mm overall length and a 22 mm shank interface allow straightforward integration into existing tool posts. Fixing employs a Torx T15 engagement and an M4x10 screw for repeatable, secure clamping of the insert seat; this reduces setup times and minimises the risk of incorrect torque during changeovers. The standardised interface therefore supports rapid changeovers and predictable process parameters. Precision engineering that benefits the workshop Engineered for balance and ease of handling, the unit weighs approximately 0.49 kg, keeping inertial loads low for better spindle and carriage response. The head incorporates five cutting edges, arranged to deliver consistent engagement and distribution of cutting forces where applicable. For less experienced operators, internal coolant and a positive clamping system translate directly into fewer interruptions for manual cooling or adjustments. The compact form factor and clear mounting scheme help maintain machine ergonomics and lower the barrier to implementing high-precision operations in diverse shop-floor environments. Practical advantages across turning applications Whether used for facing, profiling or shoulder turning on CNC lathes, the tool head delivers predictable behaviour and straightforward maintenance routines. The SKU T424-1TM identifies the specific configuration, which is manufactured by Teknik Makina and designed for reliable interchangeability with Sandvik insert systems. Reduced downtime from quicker insert swaps, combined with improved chip control from the internal coolant, means less interruption to production and fewer consumable changes per shift—advantages that contribute directly to lower unit costs and steadier throughput. For procurement of Teknik Makina’s corner turning head with internal coolant and R390 18 compatibility, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: T424-1TM Product type: Corner turning head Label: 63mm Eckmesserkopf R390 18 L45mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21181015 Facts Diameter: 63 mm Overall length: 45 mm Shank interface diameter: 22 mm Weight: 0.49 kg Cutting angle: 90° Number of cutting edges: 5 Special features Internal coolant Compatible with R390 18 indexable inserts Recommended insert manufacturer: Sandvik Torx key: T15 Fixing screw: M4x10 FAQ What insert family does this tool head accept? The head accepts the R390 18 family of indexable inserts, making it compatible with widely available Sandvik inserts for straightforward tooling selection. How does internal coolant improve machining with this head? Internal coolant delivers cutting fluid directly to the cutting edge, which the corner turning head uses to reduce heat, improve chip evacuation and extend insert life. Is the mounting compatible with standard tool posts? The head uses a 22 mm shank interface and a compact 45 mm overall length designed for easy integration into common CNC lathe tool posts. Which fixing system secures the insert in place? Insert clamping is achieved with a Torx T15 engagement and an M4x10 fixing screw, offering reliable and repeatable clamping torque. Can the head be identified for reordering or stock management? Yes — the specific configuration is listed under SKU T424-1TM for accurate reordering and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 90° cutting angle, direct compatibility with R390-1704 indexable inserts, and a compact Ø63 mm head for reliable square turning operations; order the component directly via Metav Werkzeuge or request technical advice from our specialists. Corner tool head T408TM — 90° turning head for R390-1704 indexable inserts by Teknik Makina, Ø63 mm, 22 mm shank The Corner tool head T408TM is a 90° cutting-head designed for turning and facing operations with R390-1704 indexable inserts, suitable for standard 22 mm shank toolholders in workshops and production environments 90° cutting angle for square turning Compatible with Sandvik R390-1704 inserts 22 mm shank for standard toolholders Ø63 mm head with compact 45 mm length Precise square turning with a compact 90° head The T408TM delivers a defined 90° cutting angle, which is essential for accurate square shoulder and facing operations. With a Ø63 mm head and a 45 mm overall length, the design balances accessibility and rigidity: the compact geometry reduces overhang while maintaining the stiffness required for consistent metal removal. The result is repeatable shoulder definition and surface integrity when machining steels or general components with indexable tooling. The 90° geometry also simplifies setup calculations and toolpath planning in CNC turning applications. Secure insert clamping and straightforward maintenance Compatibility with R390-1704 indexable inserts and the included Torx M3.5×8.5 clamp screw—tightened with a T15 key—ensures a reliable, repeatable clamping interface. This standardised fastening method allows fast insert changes and precise seating, which reduces downtime and makes micro-adjustments less frequent. The head accommodates inserts from Sandvik, offering access to proven grades and chipbreakers for different materials, while the visible Torx interface supports controlled torque application and safer maintenance procedures. Shank interface and workshop integration for consistent performance A 22 mm shank diameter is provided for secure mounting in common toolholders, offering a familiar interface for retrofit or new setups. At 0.59 kg, the component provides a solid feel without excessive mass, supporting dynamic stability during moderate to heavy cuts. The head supplies six cutting edges configuration for insert orientation and effective use cycles. Together, these characteristics promote steady cutting forces and predictable tool life, which supports throughput optimisation and reduces the need for frequent rework. Contact Metav Werkzeuge for delivery options and a technical consultation on integrating the Teknik Makina Corner tool head T408TM into existing turning toolholders Technical data Article number: T408TM Manufacturer: Teknik Makina Suitable for inserts: R390-1704 Compatible insert manufacturer: Sandvik Torque screw: M3.5×8.5 Torx Core data Shank diameter: 22 mm Head diameter: 63 mm Cutting angle: 90° Number of cutting edges: 6 Overall length: 45 mm Weight: 0.59 kg Special features Indexable insert system compatibility Torx clamp screw for secure fastening Compact design for reduced overhang Workshop and CNC turning applications FAQ Which inserts fit this turning head? The turning head is compatible with R390-1704 indexable inserts and is specified for inserts from Sandvik as noted for the T408TM. What clamping hardware is required for insert changes? Insert clamping uses a Torx M3.5×8.5 screw and requires a T15 key for secure and repeatable fastening on the T408TM. What shank size is needed for mounting? The component is manufactured for a 22 mm shank interface, suitable for standard toolholders designed for that diameter. How does the 90° cutting angle affect machining? A 90° cutting angle provides clear square shoulder definition and simplifies programming for shoulder and facing operations, improving dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid turning solution that combines precise compatibility with SNHU 1206 indexable inserts, robust clamping and straightforward maintenance for reduced downtime. Order the component via Metav Werkzeuge or consult Metav's specialists for application advice and supply from Emmerich. Corner tool head — Teknik Makina, for SNHU 1206 indexable inserts, 63 mm head diameter The Corner tool head is a compact turning head intended for machining operations that use SNHU 1206 indexable inserts; it pairs a rigid 63 mm head with a 22 mm shank for secure seating and repeatable performance. For SNHU 1206 indexable inserts 63 mm head diameter for rigidity 22 mm shank diameter fits standard holders Secure clamping with M4x10 Torx screw Stability and precision for consistent turning results The design prioritises rigidity through a 63 mm head diameter, which reduces vibration during corner turning and profile work. A stiffer head leads to improved surface finish and extended insert life by lowering micro-chatter; the modest mass of 0.472 kg supports quick tool changes without compromising stability. For workshops that rely on repeatable results, this configuration provides a measurable improvement in process reliability and finishing quality. Compatibility that simplifies tooling logistics Built specifically for SNHU 1206 indexable inserts, the holder ensures correct insert seating and orientation for operations that require reliable corner engagement. The standard 22 mm shank diameter allows straightforward integration into existing tool posts and modular clamping systems, reducing the need for additional adapters. Using a dedicated holder for a defined insert size shortens setup time and helps maintain consistent cutting conditions across batches. Secure clamping and easy serviceability Clamping is effected via an M4x10 Torx screw and requires a T15 key, providing secure fixation with a familiar fastener standard. This straightforward fastening method simplifies insert replacement and routine checks; the use of a Torx drive enhances torque transmission and reduces cam-out, contributing to safe, repeatable clamping. The configuration supports quick maintenance cycles, keeping machine uptime high without complex procedures. Practical benefits for daily workshop use The turning head’s compact overall length of 40 mm helps when workspace or turret clearance is limited, while the 63 mm head diameter balances stiffness with accessibility. The combination of measured dimensions and a proven clamping arrangement helps workshops reduce unplanned tool changes and standardise tool inventories. For operations that prioritise uptime and machining consistency, this holder is a practical addition that supports efficient production workflows. For expert guidance on integrating Teknik Cutting Tools' corner tool head into production—plus supply from Metav Werkzeuge in Emmerich—contact Metav via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid fulfilment Technical data Article number: T617-1TM Manufacturer SKU: T617-1TM Manufacturer: Teknik Makina Core dimensions Head diameter: 63 mm Overall length: 40 mm Shank diameter (clamping): 22 mm Weight: 0.472 kg Number of cutting edges: 5 Features & compatibility Compatible with SNHU 1206 indexable inserts Torx screw: M4x10 Torx key: T15 Intended use: turning with indexable inserts FAQ What insert type does this tool accept? The corner tool head is designed for SNHU 1206 indexable inserts and ensures correct seating and orientation for reliable corner turning. Which shank diameter is required for mounting? Mounting requires a 22 mm shank diameter holder; the tool's 22 mm clamping diameter fits standard 22 mm tool posts. How is the insert clamped in the head? The insert and clamp are secured with an M4x10 Torx screw, operated with a T15 key for consistent torque and secure fixation. Is the head suitable for high-precision finishing operations? With a 63 mm head diameter and rigid construction, the holder reduces vibration and supports improved surface finish and repeatability in finishing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of quick insert compatibility and secure Torx clamping for uninterrupted turning operations; the unit’s Shank Ø 22 mm and compact overall length make it a space-saving choice for medium-duty tool posts. Order the component directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head (T618TM) – indexable insert turning head with Shank Ø 22 mm, for SNHU 1206 inserts (Teknik Makina) The Corner tool head is an indexable insert turning head intended for external turning and profiling operations, compatible with SNHU 1206 indexable inserts and optimised for reliable clamping in production and workshop environments. Compatible with SNHU 1206 inserts Shank Ø 22 mm for standard tool posts 63 mm head diameter for stable cutting T15 Torx fastener with M4x10 screw Consistent cutting performance through rigid design The holder is engineered to deliver stable machining by combining a compact form with a sizeable head diameter. Its 63 mm head provides a steady support platform that helps reduce vibration during cuts, which in turn improves surface finish and tool life. Thanks to the solid construction, the unit maintains repeatable results across batch production, making it a pragmatic choice where process reliability and throughput matter. This translates into fewer reworks and a better utilisation of indexable insert life. Fast, secure clamping for shorter changeover times Clamping is executed via a T15 Torx fastener and an M4x10 screw, offering a secure and repeatable seat for the insert. The Torx interface simplifies torque application and reduces the risk of screw cam-out, so insert changes are efficient and toolholders remain firmly set under cutting loads. Reduced changeover time increases machine availability, supporting a rational, cost-effective workflow in mixed-production environments. Engineered for SNHU 1206 indexable inserts and Palbit compatibility Designed specifically for SNHU 1206 indexable inserts, the head is compatible with Palbit insert geometries and seating dimensions; this ensures correct rake and clearance angles without additional adapters. Using standardised insert types facilitates inventory management and keeps tooling costs predictable. Where insert geometry matters for chip control and tool life, the correct seating provided by this holder keeps cutting conditions consistent and repeatable. Workshop-friendly dimensions and practical weight With an overall length of 40 mm, a shank diameter of 22 mm and a net mass of 0.503 kg, the turning head combines compactness with sufficient mass to dampen minor vibrations. The moderate weight supports easy handling during tool setup while contributing to cutting stability once mounted. The compact footprint helps where turret space is limited or when multiple tools must be mounted close together, enabling denser tool layouts without compromising functionality. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina Corner tool head T618TM into current tool setups or to request a commercial proposal; Metav’s workshop-ready supply and technical competence ensure reliable delivery and application support Technical Data Article number: T618TM Manufacturer: Teknik Makina Facts Head diameter: 63 mm Shank diameter: 22 mm Overall length: 40 mm Weight: 0.503 kg Cutting edges: 6 Special features Torx screw M4x10 Torx key size T15 Suitable for SNHU 1206 indexable inserts Compatible with Palbit inserts Designed for external turning and profiling FAQ What insert type is required for this holder? The holder is specified for SNHU 1206 indexable inserts; these fit the seating geometry provided by the Corner tool head and are compatible with Palbit insert variants. Which shank size is compatible with standard tool posts? This turning head has a Shank Ø 22 mm, matching tool posts and turrets designed for a 22 mm tool shank. How is the insert secured in place? Insert clamping is achieved via a Torx fastener system using a T15 Torx key and an M4x10 screw, providing a secure and repeatable clamp. Is the unit suitable for heavy interrupted cuts? The 63 mm head diameter and solid construction improve stability; while it is intended for medium-duty turning, its rigidity helps withstand moderate interrupted cutting when used with appropriate inserts. Can the product be ordered through Metav Werkzeuge and is technical advice available? Yes, the T618TM Corner tool head can be ordered via Metav Werkzeuge, and their technical team provides application guidance to ensure correct integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining the 63 mm diameter, internal coolant and six cutting edges delivers stable, repeatable right‑angled turning with reduced chip build‑up and longer insert life; order the tool directly via Metav Werkzeuge or consult our specialists for suitability. Corner tool head for SPMG 0904 Indexable Inserts — 63 mm, internal coolant (Teknik Makina) The Corner tool head is engineered for precise right‑angled facing and profiling on CNC lathes using SPMG 0904 indexable inserts, offering compact reach and coolant‑fed cutting performance for production environments 63 mm diameter for extended reach Internal coolant for efficient chip evacuation Compatible with Taegutec SPMG 0904 inserts Six cutting edges with 90° cutting angle Higher throughput through stable cutting conditions The combination of a 63 mm diameter body and internal coolant ensures consistent cutting conditions that support shorter cycle times and fewer interruptions for tool changes. Internal coolant feeds the cutting edge directly, improving chip control and reducing edge wear; this translates into longer insert life and more predictable batch processing. For machining tasks that require firm 90° shoulders, the six cutting edges and 90° cutting angle provide repeatable geometry and reduced vibration, which benefits process capability and workpiece quality. Seamless integration with standard indexable tooling Designed around the widely used SPMG 0904 insert format and matching Taegutec tooling standards, the head simplifies tooling logistics and spare‑part management. Assembly and replacement are supported by the supplied Torx interface—T15 key engagement—and the securing screw specification M3.5×8.5, enabling fast, secure insert clamping with common workshop tools. Compatibility with standard indexable inserts reduces inventory complexity while enabling quick adaptation between roughing and finishing grades. Practical handling and workshop advantages With an overall length of 45 mm and a mass of 0.362 kg, the head balances reach and stability without unnecessary overhang, aiding spindle life and rigidity in medium‑duty turning applications. The compact design suits batch production and small series in jobbing shops as well as integration in automated manufacturing cells. Clear mechanical specifications and the proven mounting interface support straightforward set‑up and repeatable results, making this head a practical choice where reliability and uptime are priorities. Contact Metav Werkzeuge to secure the Teknik Makina corner tool head with internal coolant from our Emmerich warehouse and confirm fitment for existing toolholders and insert grades Technical data Article number: T340-1TM Manufacturer: Teknik Makina Product type: Corner tool head for indexable inserts Compatible inserts: SPMG 0904 (Taegutec) Core dimensions Diameter: 63 mm Overall length: 45 mm Weight: 0.362 kg Cutting edges: 6 Cutting angle: 90° Features Internal coolant Torx key: T15 Torx screw: M3.5×8.5 Compatible with Taegutec SPMG 0904 inserts SKU: T340-1TM FAQ What insert types are compatible with this head? The head is designed for SPMG 0904 indexable inserts; compatibility is confirmed for Taegutec insert grades. Does the tool head provide through‑tool coolant? Yes, the internal coolant channel supplies cutting fluid directly to the cutting zone for improved chip evacuation and tool life. What fastening hardware is required for insert clamping? Insert clamping uses a Torx screw specified as M3.5×8.5, tightened with a T15 Torx key. Is the head suitable for producing 90° shoulders and faces? The geometry and 90° cutting angle make the head well suited to accurate right‑angled facing and shoulder turning operations. Which manufacturer produced this item and what is the SKU? The product is supplied by Teknik Makina and sold under SKU T340-1TM, distributed via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefitting from a compact, rigid design and secure Torx clamping, this corner turning head combines compatibility with SPMT 1204 indexable inserts and a 22 mm shank for stable mounting; order directly from Metav Werkzeuge or request application advice from our consultants. Corner turning head T651TM — for SPMT 1204 indexable inserts, 22 mm shank Corner turning head T651TM designed for precise external turning in confined tool setups using SPMT 1204 indexable inserts Secure Torx clamping M5x12 Compatible with SPMT 1204 inserts 22 mm shank for stable mounting Ø63 mm head for cutting stability Precision and performance where space is limited The compact turning head offers a balance of rigidity and accessibility for small-envelope turning operations. With a 22 mm shank and a Ø63 mm head, the unit stabilises the cutting geometry to reduce vibration and improve surface finish when fitted with SPMT 1204 indexable inserts. The configuration is intended for short overhangs and confined tool positions; the reduced mass (0.772 kg) contributes to improved dynamic behaviour and repeatable results across batch runs. Secure clamping and maintenance-friendly design Clamping is achieved via a Torx M5x12 screw tightened with a T20 key, providing consistent seat pressure and simplified insert changes. The arrangement ensures defined insert positioning and rapid rework of worn edges, which supports predictable cycle times in production. The head incorporates five effective cutting edges, enabling economical indexable insert rotation while maintaining the necessary rigidity for finishing and light to medium-duty turning tasks. Integration, material handling and shop-floor benefits Designed for compatibility with standard toolholders, the head fits common toolposts and adapters thanks to the 22 mm mounting diameter. The geometry supports a range of external turning operations where tool access is restricted and repeatability is required. For engineering teams evaluating process stability, the combination of controlled clamping, compact overall length (50 mm) and a defined head diameter helps to reduce setup time and increase uptime through predictable insert life and stable cutting forces. For application guidance or to secure a reliable delivery from Emmerich, contact Metav Werkzeuge for tailored integration advice and order handling for the Teknik Cutting Tools corner turning head T651TM via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T651TM Brand: Teknik Makina Numbers / Core technical data Weight: 0.772 kg Head diameter: 63 mm Overall length: 50 mm Shank diameter: 22 mm Cutting edges: 5 Designs / Special features Compatible with SPMT 1204 indexable inserts Torx screw M5x12, Torx key T20 Compact corner turning head for external turning SKU: T651TM FAQ What inserts are compatible with this turning head? The turning head is designed for SPMT 1204 indexable inserts and delivers correct seating and orientation for that insert format. Which shank size is required for mounting? Mounting uses a 22 mm shank diameter; the toolholder or adapter must accept this shank for correct clamping and alignment. How is the insert secured in the head? Insert clamping is effected by a Torx M5x12 screw, tightened with a T20 key to ensure reliable seating and repeatability in the T651TM head. Is the head suitable for finishing cuts? Yes, the geometry and stiffness of the head make it suitable for finishing and light to medium turning operations when used with the appropriate SPMT 1204 insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precisely oriented turning solution with a 90° cutting angle, compatibility for TPKN 1603–2204 indexable inserts and secure M8x24 fastening for reliable repeatability on the shop floor; order the component directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. Corner tool head — indexable insert head for TPKN 1603–2204, 90° cutting angle | Teknik Makina Corner tool head designed for turning and profiling operations, optimised for use with TPKN 1603–2204 indexable inserts and engineered for stable mounting in 22 mm toolholders 90° cutting angle for precise corner turning 22 mm shank diameter for secure toolholder mounting Compatible with TPKN 1603–2204 indexable inserts Robust M8x24 hex screw fastening, 0.532 kg weight Consistent geometry and process reliability for turning tasks The compact head delivers a repeatable cutting geometry thanks to its 90° cutting angle and defined seating for indexable inserts. This arrangement reduces set-up deviations and helps maintain part tolerances across batches. The unit’s design accommodates inserts in the TPKN 1603–2204 family, so insert indexing and replacement are straightforward; the result is less machine downtime and improved process stability. Where consistent corner profiling is required, this head supports predictable chip flow and cutting behaviour through a rigid mounting interface. Secure clamping and practical handling in daily workshop use A precisely dimensioned 22 mm shank and a robust M8x24 fastening screw provide secure mechanical connection to standard toolholders, ensuring minimal vibration during cutting. The fastening is intended for maintenance with a 5 mm Allen key, simplifying insert changes and tightening sequences. With a nominal diameter of 63 mm, an overall length of 50 mm and a mass of 0.532 kg, the component balances compactness and sufficient mass to aid stability without compromising tool clearance. These attributes combine to offer fast, reliable interchangeability and predictable balancing behaviour in lathe setups. Practical advantages for procurement and workshop workflows Designed for economical insert replacement, the head accepts three cutting edges and supports efficient indexable-insert workflows, lowering ongoing tooling costs compared with solid tooling alternatives. The standardised screw and shank dimensions simplify spare-part logistics and mean common workshop tools suffice for routine operations. For production planners and toolroom managers seeking a compact turning head that integrates into existing setups, the design offers an attractive compromise between rigidity, accessibility and ease of maintenance, while keeping setup routines short and repeatable. For dependable corner turning equipped with Teknik Makina quality, contact Metav Werkzeuge to discuss the T126TM corner tool head and secure supply directly from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T126TM Manufacturer: Teknik Makina E-class: 21181015 Designation: Eckmesserkopf Application: for TPKN 1603–2204 Indexable Inserts Facts Diameter: 63 mm Shank diameter (mount): 22 mm Overall length: 50 mm Weight: 0.532 kg Cutting angle: 90° Cutting edges: 3 Hex screw: M8x24 Allen key size: 5 mm Special features Compatible inserts: TPKN 1603–2204 Indexable insert mounting Compact turning head geometry FAQ What inserts fit this turning head? The head is designed for TPKN 1603–2204 indexable inserts and secures them in a defined seat for repeatable cutting geometry. Which shank size is required for mounting? A 22 mm toolholder bore is required to accept the 22 mm shank provided with the T126TM turning head. What fastener is used to secure the insert head? The head is fixed with an M8x24 hex screw; use a 5 mm Allen key for tightening to the specified torque procedures. Is the head suitable for heavy roughing cuts? The compact design and secure 22 mm mounting provide good rigidity for many turning operations; selection for heavy roughing should be matched to machine capacity and insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust build and internal coolant of this corner tool head to improve chip control and extend insert life; the compact 63 mm diameter and 90° cutting angle deliver consistent, productive turning cycles — order directly via Metav Werkzeuge or consult our technical team for application advice. Eckmesserkopf T772-1TM — 63 mm corner tool head with internal coolant for WNEX 0806 by Teknik Makina The Eckmesserkopf is a compact corner tool head engineered for precision turning with WNEX 0806 indexable inserts, offering internal coolant and a 90° cutting angle for reliable chip evacuation in demanding lathe applications. Compact 63 mm diameter for tight installations Integrated internal coolant for improved chip control Compatible with WNEX 0806 indexable inserts (YG-1) Consistent machining performance with a compact tool head The tool head delivers reliable cutting behaviour through its 63 mm diameter housing and rigid design, providing stable support for short overhang operations. The 90° cutting geometry produces predictable tool forces and repeatable results in facing and profiling tasks. By combining a compact footprint with a robust connection, the holder reduces vibration and contributes to more consistent surface finish and dimensional accuracy during production runs. Improved process reliability through internal coolant Equipped with internal coolant, the holder channels coolant directly to the cutting edge, enhancing chip breaking and heat dissipation. This targeted coolant supply reduces thermal load on the insert, which in turn helps to extend insert life and maintain cutting performance over longer cycles. For operations where chip control and tool longevity matter, the integrated coolant option supports uninterrupted machining and lowers the frequency of tool changes. Compatibility and straightforward maintenance for production use Designed for WNEX 0806 indexable inserts, the head is specified to accept inserts from the YG-1 system and secures them with M4x10 Torx screws (Torx key T15). The standardised fastening and accessible screw type simplify maintenance and regrip, lowering downtime during insert changes. The compact overall length of 40 mm and a weight of 0.451 kg make the head suitable for machines with limited toolpost space while preserving the rigidity required for industrial turning tasks. Discuss application fit and supply options with Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a tailored recommendation and secure prompt delivery from our Emmerich quality hub Technical Data Article number / SKU: T772-1TM Product: Eckmesserkopf Manufacturer: Teknik Makina ECLASS: 21181015 Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.451 kg Cutting edges: 6 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Special features Internal coolant For WNEX 0806 indexable inserts Compatible with YG-1 inserts Compact design for limited toolpost space FAQ What inserts fit this tool head? The Eckmesserkopf T772-1TM is specified for WNEX 0806 indexable inserts and is compatible with inserts from the YG-1 range. Does the holder provide coolant to the cutting edge? Yes, the head features internal coolant, supplying coolant directly to the insert for improved chip control and thermal management. Which fastening hardware is used for the inserts? Inserts are secured with M4x10 Torx screws; the required Torx key is T15 for straightforward maintenance. Is the tool head suitable for machines with limited space? With a compact overall length of 40 mm and a diameter of 63 mm, the holder is intended for installations with restricted toolpost clearance while maintaining rigidity. Who manufactures this corner tool head? This product is supplied by Teknik Makina and distributed via Metav Werkzeuge to ensure consistent quality and availability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust solution that combines 63 mm diameter stability, integrated internal coolant and proven compatibility with WNGX 0806 indexable inserts to keep cycle times low and surface quality high; order or request advice directly via Metav Werkzeuge. Corner turning head for WNGX 0806 indexable inserts (63 mm, L40) by Teknik Makina Corner turning head for WNGX 0806 indexable inserts, a compact tool head with integrated internal coolant designed for precise external corner turning in confined setups 63 mm diameter for compact turning Internal coolant for improved chip control Compatible with WNGX 0806 Korloy inserts Short 40 mm overall length for tight spaces High-performance turning for compact production cells The corner turning head delivers a stiff, compact solution for external corner turning where space and stability are critical. With a 63 mm diameter and a 90° cutting angle, the head provides a predictable cutting geometry that helps to reduce vibration and maintain consistent surface finish. The design is optimised for stiff clamping and short overhang, which translates into more reliable tool life and reduced rework. Where insertion and indexing of cutting edges are concerned, compatibility with the WNGX 0806 system ensures broad availability of grades and chipbreakers. Improved tool life and process reliability through direct cooling Integrated internal coolant channels deliver coolant directly to the cutting zone, which aids chip evacuation and lowers cutting zone temperatures. This targeted coolant supply helps to extend the life of the indexable inserts and to stabilise cutting forces during interrupted cuts. When used with Korloy WNGX 0806 inserts, coolant-assisted cooling improves edge retention and contributes to consistent part quality across longer production runs. For workshops transitioning from solid-tooling to indexable systems, this feature reduces process variability and supports reproducible results. Quick fitting and straightforward maintenance for efficient shifts Assembly and maintenance are kept simple: the head uses an M5x12 Torx screw and a T20 key for secure fastening, enabling fast tool changes and minimal downtime. At L40 mm overall length and a mass of 0.47 kg, the component is easy to handle on the shop floor and integrates cleanly into automated turrets or compact tool posts. The head’s six cutting-edge provision means fewer interruptions for indexing, while clearly defined screw and key sizes remove ambiguity from set-up procedures, speeding up changeovers in production environments. Secure the Teknik Makina corner turning head T776-1TM for compact, coolant-fed turning applications through Metav Werkzeuge — speak to our advisers for stock availability and application guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: T776-1TM Product type: Corner turning head Designation: Corner turning head for WNGX 0806 indexable inserts Brand: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.47 kg Cutting angle: 90° Cutting edges: 6 Torx screw: M5x12 Torx key: T20 Special features Internal coolant Compatible inserts: WNGX 0806 Compatible insert manufacturer: Korloy eClass: 21181015 UID: T776-1TM FAQ Which indexable inserts fit this turning head? Compatible with WNGX 0806 indexable inserts; the head is designed to accept Korloy WNGX 0806 grades and geometries for a wide range of materials. Does the tool head provide internal cooling? Yes — the corner turning head features internal coolant channels that deliver cutting fluid directly to the insert contact zone to improve chip control and tool life. What fastening hardware is required for assembly? Assembly uses an M5x12 Torx screw and a T20 Torx key for secure mounting and quick tool changes. Is this head suitable for tight tooling envelopes? The compact design, 63 mm diameter and 40 mm overall length make the head appropriate for confined setups and applications where short overhang is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com