Gibt es einen Hahn und Kolb Online Shop?

Compact 63 mm diameter, secure Torx clamping and RDMT 1003 insert compatibility combine to deliver reliable finishing with reduced setup time — order via Metav Werkzeuge or consult our specialists for application guidance. Round Insert Face Mill T292TM — 63 mm diameter, for RDMT 1003 indexable inserts (Teknik Makina) The Round Insert Face Mill T292TM is a compact face milling cutter engineered for precise finishing and semi-finishing tasks where rigidity and fast insert changes are essential 63 mm diameter for compact milling Compatible with RDMT 1003 inserts Secure Torx T15 clamping system Compact design for improved stiffness and access The compact 63 mm diameter paired with a 22 mm shank delivers a balance of accessibility and rigidity that benefits tight setups and short overhangs. A reduced overhang lowers vibration and improves stability, which in turn supports repeatable surface quality in batch production. The moderate overall length of 40 mm makes the tool suitable for operations where space is limited or where precise radial control matters. The lightweight construction (0.445 kg) reduces spindle load during acceleration and contributes to reliable tool dynamics for consistent finishing. Secure clamping for quick, repeatable insert changes A defined clamping system centred on a Torx T15 key plus matching screws (locking screw M3.5, Torx screw M3.5x8.5) ensures repeatable seating and straightforward maintenance. This arrangement reduces downtime during insert replacement and maintains a constant cutting geometry, so results remain consistent part to part. The fast, secure fastening also mitigates micro-movement during cutting, which supports improved tool life of the inserts and steadier surface finishes across repeated cycles. Compatibility and cutting geometry tuned for reliable finishes Designed specifically for RDMT 1003 indexable inserts and equipped with 5 cutting edges, this face mill supports uniform material removal and steady chip formation. Compatibility with a widely used insert size simplifies stocking and replacement logistics. The cutter's layout and insert configuration favour smooth engagement on the workpiece, helping to achieve a consistent finish without complex parameter adjustments. As an industrial-grade accessory from Teknik Makina, the tool is aimed at workshops and small production lines requiring dependable, easy-to-service milling solutions. Discuss machining scenarios with Metav Werkzeuge to confirm suitability for the intended application or to request detailed mounting advice for the T292TM face mill Technical data Article number: T292TM Manufacturer: Teknik Makina Product: Round insert face mill for RDMT 1003 indexable inserts Dimensions & weight Diameter: 63 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.445 kg Features Cutting edges: 5 Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which inserts does this cutter use? The cutter is designed for RDMT 1003 indexable inserts; using the specified insert format ensures correct seating and cutting geometry for the T292TM face mill. What shank size is required for mounting? Mounting requires a tool holder or arbor compatible with a 22 mm shank diameter to maintain proper rigidity for the face mill. How many cutting edges are fitted to the cutter? The tool is equipped with 5 cutting edges, which supports smooth engagement and steady chip evacuation for finishing passes. Is the clamping system industry-standard? Yes — the clamping utilises a Torx T15 key with screws M3.5 and M3.5x8.5, offering a reliable, service-friendly fastening method. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, coolant-capable milling solution that combines precise indexable-insert compatibility and robust chip control for consistent surface quality and shorter cycle times. Order the Teknik Makina tool directly via Metav Werkzeuge or consult our specialists for application-specific advice. Round insert cutter for RDMT 1003 — 63 mm, internal coolant (Teknik Makina) Round insert cutter for RDMT 1003 designed as a compact face milling head for coolant-fed machining in small to medium CNC centres and workshop milling setups 63 mm diameter for compact face milling Compatible with RDMT 1003 inserts Internal coolant integration for chip control Six cutting edges for higher productivity Precise material removal with predictable performance The compact face mill body is optimised for stable cutting and reproducible results in finishing and medium stock-removal tasks. Fitted for RDMT 1003 indexable inserts and configured with 6 cutting edges, the design reduces vibration and evens out cutting forces, which in turn improves surface finish and extends insert life. The moderate overhang and balanced mass distribution support consistent machining tolerances across repeated cycles, making the head suitable for series production and jobbing work where dimensional reliability is crucial. Coolant-fed design improves tool life and chip management Integrated internal coolant channels direct cutting fluid precisely to the cutting zone, reducing thermal load and flushing chips away from the edge. This targeted cooling both prolongs insert life and lowers the risk of built-up edge or surface burn, particularly in interrupted cuts or harder materials. The cutter accepts standard Torx-served fastenings (key Torx T15, screws M3.5x8.5), allowing quick insert changes and secure clamping while maintaining coolant integrity through the tool body. Compatibility and straightforward workshop handling The milling head is compatible with workshop clamping systems that accept compact cutter bodies and is intended for use with RDMT 1003 indexable inserts. At 63 mm diameter and 40 mm overall length, the unit provides a space-saving alternative where access is limited. With a mass of 0.46 kg, handling and balancing on small spindles is simplified. The combination of insert standardisation and common fastener types streamlines inventory requirements and supports rapid changeovers, reducing downtime in multi-job environments. For clarification on machine suitability or material-specific feed and speed recommendations, Metav Werkzeuge can provide technical documentation and guidance. Contact Metav Werkzeuge for a tailored supply and application consultation on the Teknik Makina round insert cutter — secure reliable delivery from Emmerich and expert assistance for material- and process-specific setup Technical data Article number: T293-1TM Designation: Round insert cutter for RDMT 1003, L 40 mm, internal coolant Manufacturer: Teknik Makina Product type: Face milling head Label: 63mm Round insert cutter RDMT 1003 L40mm with internal coolant UID: T293-1TM Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.46 kg Cutting edges: 6 Special features Internal coolant: yes Compatible inserts: RDMT 1003 Torx key: T15 Torx screw: M3.5x8.5 Category: Face milling head FAQ What inserts are required for this cutter? The cutter is designed for RDMT 1003 indexable inserts; the Teknik Makina head and SKU T293-1TM accept the standard RDMT 1003 geometry for predictable seating and cutting performance. Is the tool suitable for coolant-fed operations? Yes, the unit features internal coolant delivery to the cutting edge, optimising thermal control and chip evacuation during coolant-fed machining. Which fasteners are used to secure the inserts? Inserts are clamped using Torx fastenings; the head requires a Torx T15 key and uses M3.5x8.5 screws for secure insert fixation. What machine types are appropriate for this milling head? The compact dimensions (63 mm diameter, 40 mm overall length) suit small to medium CNC milling centres and workshop milling spindles where reduced overhang and stable clamping are required; the low mass assists with high-speed indexing and short-cycle applications. How does the cutter affect tool inventory and changeover time? Standardised use of RDMT 1003 inserts and common Torx fasteners reduces spare-part variety and enables fast insert swaps, lowering downtime and simplifying workshop logistics for series and mixed production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, modular cutter that accepts RDMT 1003 indexable inserts and delivers consistent material removal with six cutting edges; the secure Torx clamping and a 22 mm shank reduce downtime and simplify tool changes. Order the cutter directly via Metav Werkzeuge or consult the technical advisors for specification support. Round Insert Cutter T293TM — Ø63 mm, six-edge design | Teknik Makina The Round Insert Cutter T293TM is a purpose-designed face milling tool for insert-based machining, offering compact performance for workshop and production environments where quick insert changes and reliable clamping are essential Compatible with RDMT 1003 inserts 63 mm cutter diameter for compact operations Six cutting edges for steady material removal Secure clamping with M3.5 Torx screws Efficient, insert-based machining for short cycle times The cutter is optimised for economical machining by accepting indexable inserts (RDMT 1003), which enables rapid reconditioning of the cutting edge without regrinding. The combination of a Ø63 mm body and six cutting edges provides a balance between material removal rate and tool life, making the tool suited to repetitive face-milling operations. The design focuses on reducing machine idle time: inserts are replaced in seconds and the cutter is returned to productive service immediately, which supports a steady production flow and controlled process costs. Reliable clamping and simple maintenance to lower downtime A robust clamping system, specified with a M3.5 locking screw and M3.5x8.5 Torx screw, secures each insert reliably during cutting. The use of a standard T15 key for fastening ensures compatibility with common workshop tooling and simplifies maintenance procedures. Because clamping hardware and spare fasteners are standard sizes, maintenance routines are faster and less error-prone, which translates into measurable reductions in set-up time and an improved availability rate for the tool holder. Compact tool body and proven compatibility for flexible integration With a 22 mm shank (toolholder connection) and an overall length of 40 mm, the cutter is dimensioned for both compact set-ups and machines with limited clearance. The compact form factor is advantageous where tool overhang must be minimised to reduce vibration and improve surface finish. The tool’s compatibility with RDMT 1003 inserts allows straightforward integration into existing tooling systems, permitting a modular approach to tooling inventory and enabling cost-efficient stocking of inserts rather than complete cutters. Practical specification and workshop-ready details The cutter’s balanced construction and a total weight of 0.46 kg make handling and tool changes straightforward on the shop floor. The geometry with six cutting edges smooths material removal and helps to distribute cutting forces evenly across the insert set. Where process planners require consistent repeatability, the combination of standardised insert form, secure Torx clamping and compact Ø63 mm body provides a predictable performance profile that supports stable cycle times and repeatable part quality. For procurement advice, application matching or to discuss batch availability of the Teknik Makina round insert cutter, contact Metav Werkzeuge's specialists in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical assistance and delivery coordination Technical data Article number: T293TM Brand: Teknik Makina Product name: Round Insert Cutter for RDMT 1003 indexable inserts Facts Cutter diameter: 63 mm Cutting edges: 6 Overall length: 40 mm Shank diameter: 22 mm Weight: 0.46 kg Special features Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 SKU: T293TM FAQ What inserts are compatible with this cutter? The cutter accepts RDMT 1003 indexable inserts; the tool body is designed specifically for that insert form to ensure correct seating and cutting geometry. How many cutting edges does the tool provide? This face mill features six cutting edges, which distributes cutting forces and supports steady material removal in repetitive operations. What is the shank diameter and how does it affect machine set-up? The shank diameter is 22 mm, a compact size that suits machines or holders requiring reduced overhang and helps maintain rigidity in short-reach milling tasks. Which fastening hardware is required for insert replacement? Insert clamping uses a M3.5 locking screw and a M3.5x8.5 Torx screw, tightened with a T15 key, allowing straightforward maintenance with common workshop tools. Is this cutter suitable for a modular tooling system? Yes, being compatible with standard RDMT 1003 inserts, the cutter supports a modular tooling approach that simplifies stock management and reduces the need for full-body replacements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact 63 mm cutter with internal coolant and six cutting edges that deliver stable, repeatable face milling—minimising changeovers and supporting consistent surface quality. Order the tool directly via Metav Werkzeuge or consult our specialists for machining advice. Round Insert Face Mill T142-1TM – 63 mm, internal coolant, 6‑cut by Teknik Makina A compact Round Insert Face Mill T142-1TM engineered for efficient face milling with RDMT 1204 indexable inserts and integrated internal coolant. 63 mm diameter for compact set-ups Internal coolant for improved chip control Six cutting edges for steady material removal Compatible with RDMT 1204 indexable inserts Deliver consistent productivity with a compact design The 63 mm diameter body and six cutting edges combine to provide a balanced cutter that promotes stable cutting forces and predictable tool behaviour. By distributing the cutting load across multiple edges, the tool reduces vibration and contributes to consistent surface finish in repetitive face-milling tasks. The relatively light mass (0.512 kg) and a compact total length of 40 mm make the cutter suitable for confined setups where rigidity and accessibility must be balanced. These characteristics support reliable cycle times and help to keep changeover effort to a minimum. Internal coolant for better chip control and tool life An integrated coolant channel delivers lubricant and coolant directly to the cutting zone, improving chip evacuation and temperature control. Internal coolant reduces the risk of built-up edge and aids in maintaining stable cutting conditions over extended runs. For users less familiar with coolant-fed tooling: this means fewer recuts, improved surface integrity and more predictable tool wear. The built-in feed path is especially useful when machining operations require consistent cooling without complex external arrangements. Fast insert changes and secure clamping for efficient maintenance Compatibility with RDMT 1204 indexable inserts simplifies inventory and replacement procedures. The cutter uses Torx fastening with a T15 key and screw size M3.5x8.5, ensuring a positive, repeatable clamping interface and straightforward insert replacement. A secure Torx connection reduces the chance of loosening under cut loads and speeds up maintenance compared with less robust screw systems. The straightforward clamping concept supports predictable set-up times in busy workshop environments. Workshop integration and practical handling Designed as a face-milling solution for general production and workshop use, this cutter integrates into standard toolholders and machining routines without special adaptation. The designation T142-1TM identifies the model for procurement and toolroom tracking. The tool’s balance of compact dimensions, internal coolant, and multiple cutting edges makes it a practical choice where space, process stability and simple serviceability are priorities. For complex specifications or unusual machining tasks, Metav’s consultancy can advise on suitable spindle speeds and feed rates. Contact Metav Werkzeuge for tailored machining recommendations and to order the T142-1TM; Metav’s team in Emmerich can advise on compatibility, stock and delivery — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: T142-1TM Label: 63 mm round insert face mill RDMT 1204 L40 mm with internal coolant ECLASS: 21180902 Manufacturer: Teknik Makina Numbers / Core Technical Data Diameter: 63 mm Total length: 40 mm Weight: 0.512 kg Cutting edges: 6 Design / Special features Internal coolant For RDMT 1204 indexable inserts Torx screw: M3.5x8.5 Torx key: T15 Product type: Round insert face mill FAQ Which inserts fit this cutter? The cutter is designed for RDMT 1204 indexable inserts; the RDMT 1204 geometry is compatible with the clamping and seat of the T142-1TM round insert face mill. Does the tool support coolant supply? Yes. The T142-1TM features internal coolant, routed to the cutting zone to aid chip evacuation and temperature control during face milling. What are the key dimensions for fixture planning? Key values: 63 mm diameter and 40 mm total length; weight is 0.512 kg, which helps when assessing balance and toolholder load. How are the inserts secured? Inserts are clamped with a Torx screw, size M3.5x8.5, tightened with a T15 key to ensure secure, repeatable fastening. Which manufacturer produces this model? The T142-1TM is produced by Teknik Makina and is listed under the SKU T142-1TM for ordering and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact 63 mm diameter, internal coolant and five cutting edges combine to deliver stable, high-feed face milling in confined setups; the short 40 mm overall length increases rigidity while the lightweight construction reduces spindle load. Order the face mill directly via Metav Werkzeuge or ask our consultants if needed. Face mill head for RDMT 12T3 — 63 mm, internal coolant (Teknik Makina) The face mill head is designed for compact face milling with RDMT 12T3 indexable inserts, offering a rigid 40 mm overall length and internal coolant for consistent surface quality. 63 mm diameter for compact milling Internal coolant for longer insert life Compatible with RDMT 12T3 indexable inserts Five cutting edges for smooth material removal Greater rigidity and reliable chip control for compact setups The compact 63 mm diameter together with a 40 mm overall length provides an inherently rigid machining solution where space and stability are decisive. This configuration reduces overhang and vibration, which improves repeatability and contributes to a consistent surface finish in short-reach face milling operations. The head is compatible with RDMT 12T3 round indexable inserts, a common standard that allows rapid reconditioning of the cutting edge without full-tool replacement. The relatively low mass (0.468 kg) reduces spindle stress during rapid traverses and permits agile tool changes on busy shop floors. For process planning, the combination of reduced runout potential and standardized insert geometry supports predictable cycle times and easier inventory control. Internal coolant and multi-insert layout increase productivity An integrated internal coolant channel directs cutting fluid close to the contact zone, which lowers cutting temperatures and assists in efficient chip evacuation. This feature extends insert life and helps maintain a stable cutting edge, particularly useful during higher cutting speeds or when machining abrasive or heat-sensitive workpieces. The head accommodates five cutting edges, distributing load and enabling smooth material removal with improved surface integrity. Together, the coolant feed and the multi-insert layout allow for higher feed rates while keeping thermal deformation and built-up edge to a minimum, translating into better dimensional stability over longer production runs. Practical handling, easy insert changes and shop-floor compatibility Maintenance and assembly have been simplified with standard fastenings: the inserts are secured with M3.5 x 8.5 Torx screws (Torx key T15 supplied separately), enabling rapid insert changes and minimal downtime. The design supports straightforward seating of RDMT 12T3 inserts and is well suited to routine tool-change procedures in industrial workshops. Supplied by Teknik Makina (SKU T284-1TM), the head is intended for customers seeking a compact, serviceable solution that keeps tooling inventories lean while preserving process stability. Documentation and clearly marked dimensions facilitate integration into existing tool lists and CAM setups. Contact Metav Werkzeuge today for tailored advice and to secure this Teknik Makina face mill head for precise, compact milling operations; Metav Werkzeuge can advise on compatibility and delivery from their Emmerich stock. Technical Data SKU: T284-1TM Label: 63mm face mill head RDMT 12T3 L40mm with internal coolant ECLASS: 21180902 Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.468 kg Number of cutting edges: 5 Special features Internal coolant: yes Compatible inserts: RDMT 12T3 Torx key: T15 Torx screw: M3.5 x 8.5 Product type: face mill head UID: T284-1TM FAQ What insert type does this head accept? The face mill head accepts RDMT 12T3 indexable inserts; this standard insert family is fitted in the head supplied by Teknik Makina (SKU T284-1TM). Does the tool provide coolant to the cutting edge? Yes, the head features internal coolant, which delivers fluid to the cutting zone for improved cooling and chip control. How many inserts are fitted and what is the advantage? The head uses five cutting edges, distributing cutting forces for smoother material removal and allowing higher feed rates with stable surface finish. Which fastening and key are required for insert changes? Inserts are secured with M3.5 x 8.5 Torx screws, tightened with a T15 Torx key; this enables fast and repeatable insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a 63 mm cutting diameter combined with six cutting edges for efficient material removal and extended tool life; secure M4x10 Torx clamping guarantees stable insert fixation. Order the indexable round-insert cutter directly via Metav Werkzeuge or consult our advisors for application-specific support. Indexable round-insert cutter T662TM — 63 mm diameter, 6 cutting edges (Teknik Makina) The Indexable round-insert cutter T662TM is a compact milling head engineered for face and profile milling using RNHX 1204 indexable inserts in CNC and workshop environments. 63 mm cutting diameter for broad material engagement Six cutting edges for longer service intervals M4x10 Torx clamping for secure insert fixation 22 mm shank for common toolholder compatibility Consistent performance for medium-duty milling operations The head is designed to deliver predictable metal removal rates by combining a 63 mm diameter with six cutting edges, which spreads cutting forces and reduces per-edge load. This geometry is particularly suitable for light to medium roughing and profiling where efficient chip removal and consistent surface quality are required. The configuration reduces the need for frequent index changes and supports a steady cycle time without complex setup adjustments. Secure clamping and simple on-machine servicing Insert retention is achieved with an M4x10 Torx clamping screw and a T15 key, providing a robust mechanical connection that resists loosening under intermittent radial loads. The secure screw system simplifies insert replacement and minimises downtime during routine servicing. The compact assembly and balanced design also help to reduce vibration, contributing to improved finish and extended cutter life while the overall mass of 0.637 kg keeps handling and toolchanging straightforward. Broad compatibility for flexible tooling layouts The cutter accepts RNHX 1204 indexable inserts and is listed as compatible with inserts from Palbit, giving freedom to select grades and chipbreakers tailored to specific materials. A 22 mm shank diameter and 50 mm overall length make the head compatible with standard toolholders and accessible in tighter set-ups. The combination of compatibility and a proven insert format supports quick adaptation across production lines and simplifies inventory by using commonly available inserts. Secure Teknik Makina milling quality through Metav Werkzeuge — contact the Metav team in Emmerich for stock information and application advice. Technical data Article number: T662TM Manufacturer: Teknik Makina Description: Indexable round-insert cutter for RNHX 1204 indexable inserts Compatible inserts: RNHX 1204 (Palbit) Clamping screw: M4x10 Torx Torx key: T15 ECLASS: 21180902 ETIM: EC011860 Core technical data Diameter: 63 mm Cutting edges: 6 Overall length: 50 mm Shank diameter (D): 22 mm Weight: 0.637 kg Special features For RNHX 1204 indexable inserts Compatible with Palbit inserts M4x10 Torx clamping screw Requires T15 Torx key Compact design for accessible machining FAQ Which insert type fits this milling head? The cutter is designed for RNHX 1204 indexable inserts; compatible grades from Palbit are commonly used for a range of materials. What is the shank size and is it suitable for standard toolholders? The tool features a 22 mm shank diameter and a 50 mm overall length, making it compatible with standard holders for small-to-medium milling heads. How many cutting edges are available and what is the benefit? The head carries six cutting edges, which distribute cutting loads, extend service intervals and enable smoother metal removal compared with fewer-edge alternatives. Which torque system secures the inserts and what key is required? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is required for tightening and replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of 63 mm diameter, internal coolant and compatibility with RPMT 1204 inserts ensures a compact, high-performance milling head that reduces tool change time and improves surface finish; order the cutter directly via Metav Werkzeuge or consult our specialists for setup advice. Indexable face milling cutter T712-1TM — 63 mm diameter, internal coolant (Teknik Makina) Indexable face milling cutter T712-1TM designed for short overhang machining and reliable insert performance in industrial milling applications 63 mm diameter for compact milling heads Internal coolant for improved chip evacuation Compatible with RPMT 1204 Korloy inserts Five cutting positions for stable material removal Faster setup and consistent insert compatibility for production The compact design delivers reliable repeatability during tool changes and minimises downtime. Fitted for RPMT 1204 indexable inserts from Korloy, the head reduces the variety of holders required on the shop floor and simplifies inventory management. By standardising on widely used insert families, workshops benefit from predictable cutting geometry and fast replacement cycles, enabling a smoother production flow with fewer interruptions Controlled cooling and chip evacuation for longer tool life Built-in internal coolant channels direct coolant to the cutting zone, which lowers cutting temperatures and improves chip control. The result is a measurable reduction in flank wear and more consistent surface quality across workpieces. Effective coolant delivery also supports higher metal-removal rates under suitable cutting conditions, helping to maintain process stability and extend the lifetime of both inserts and the tool body Solid mechanical design for repeatable machining results With five cutting positions and a compact overall length of 40 mm, the head provides a stable platform for aggressive feed rates where appropriate. Fastening uses M4x8.5 Torx screws with a T15 key interface, ensuring secure clamping and straightforward maintenance. The modest mass (0.556 kg) and robust construction contribute to reduced vibration and improved dimensional consistency, which is particularly valuable in series production and finishing passes Contact Metav Werkzeuge for tailored application support and secure supply of the Teknik Makina T712-1TM indexable face milling cutter Technical Data Article number: T712-1TM Manufacturer: Teknik Makina Product type: Indexable face milling cutter Compatible inserts: RPMT 1204 (Korloy) Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.556 kg Number of cutting positions: 5 SKU: T712-1TM Special features Internal coolant Torx screw M4x8.5 Torx key T15 Compatible with Korloy RPMT 1204 inserts ECLASS: 21180902 FAQ What inserts fit this milling head? The milling head accepts RPMT 1204 indexable inserts, specified for the T712-1TM and commonly available from Korloy Does the cutter support internal coolant? Yes, the tool features internal coolant channels to improve chip evacuation and reduce cutting temperatures Which fastening system is used for the inserts? Inserts are secured with M4x8.5 Torx screws using a T15 key for reliable clamping and easy maintenance Is the T712-1TM suitable for short overhang operations? The compact 63 mm diameter and 40 mm overall length make the head particularly suited to short overhang milling where stiffness and vibration control are priorities Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust 63 mm face mill with five cutting edges and a 22 mm arbor for secure clamping; compatible with RPMW 1606 indexable inserts to reduce downtime and maintain process stability. Order the cutter directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. Rundplattenfräser T717TM — face mill for RPMW 1606 indexable inserts (Teknik Makina) Rundplattenfräser T717TM is a purpose-built face mill intended for industrial milling where rapid indexable-insert changes and consistent chip removal are required 63 mm cutting diameter Five cutting edges for stable machining 22 mm arbor for secure clamping Compatible with RPMW 1606 Korloy inserts Higher productivity through optimised cutting geometry The T717TM milling head delivers measurable process benefits thanks to its 63 mm diameter and five cutting edges, which increase material removal per revolution and reduce cycle time on repetitive face milling tasks. The cutter is designed to accept RPMW 1606 indexable inserts, allowing quick insert rotation or replacement without removing the holder from the machine. This modular approach keeps the machining process rational and cost-effective: fewer tool changes, predictable performance and easier inventory management for the production planner. The robust body geometry supports stable cuts under varying feed rates, which contributes to consistent surface finish and machining accuracy. Reduced maintenance time with standardised fastening Maintenance and insert changes are simplified by the standard Torx T20 fastening and M5x12 screws. The use of a common tool standard means less time is spent searching for specialised keys; the 22 mm arbor ensures the cutter stays firmly seated during operation, minimising risk of misalignment. For workshop managers this translates into shorter tool-change intervals and improved machine uptime. The combination of indexable inserts and standard fastenings supports a pragmatic maintenance routine that fits established workshop workflows and reduces the need for niche spare parts. Flexible integration and dependable manufacture Compatibility with Korloy RPMW 1606 inserts gives the cutter broad applicability across toolrooms and production cells that already use this insert family. The compact design — overall height of 40 mm paired with the 63 mm diameter — balances reach and rigidity, making the head suitable for many face-milling tasks where space and stiffness are factors. Supplied by Teknik Makina, the unit benefits from established manufacturing practices and component consistency, which supports predictable procurement planning. When combined with Metav’s supply reliability, the T717TM becomes a practical choice for workshops seeking to centralise tooling purchases while maintaining high-precision output. Secure process reliability with the Teknik Makina T717TM face mill — contact Metav Werkzeuge for tailored tooling advice and reliable delivery from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T717TM Manufacturer: Teknik Makina Product name: Face mill for RPMW 1606 indexable inserts Core data Diameter: 63 mm Overall height: 40 mm Cutting edges: 5 Arbor / shank diameter: 22 mm EClass: 21180902 ETIM: EC011860 Special features Compatible inserts: RPMW 1606 Compatible insert manufacturer: Korloy Fastening: Torx T20 Screw: M5x12 Suitable for indexable-insert face milling FAQ Which inserts fit this face mill? The T717TM is designed for RPMW 1606 indexable inserts; Korloy RPMW 1606 grades are compatible and commonly used with this cutter. How is an insert secured on the cutter? Inserts are fastened using M5x12 screws and a Torx T20 key for consistent clamping and straightforward replacement. What spindle or arbor requirement applies? The cutter accepts a 22 mm shank and is intended for spindles or toolholders that provide a secure 22 mm clamping interface. Can the cutter be used across different machines? Yes; the face mill’s standardised shank and insert type allow integration into various CNC milling machines and toolholders that accept a 22 mm arbor and RPMW 1606 inserts. Where can replacement screws or parts be obtained? Replacement components such as Torx screws are standard metric items; Metav Werkzeuge can advise on spare parts availability and compatible inserts for the T717TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: T120TM Item: Face Mill usable with TPKN 1603 Indexable Inserts Brand: Teknik Makina Structural Details: Diameter: 63mm Cutting Edges: 4 Weight: 0.481kg Total length: 44mm Diameter Connection: 22mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a 43° cutting geometry combined with a compact 63 mm diameter to improve material removal rates and surface finish while maintaining secure clamping via an M5x12 Torx fastening; order the Planing Head T210TM directly via Metav Werkzeuge or consult our specialists for tailored advice. Planing Head T210TM — 43° for ODHT 0605 Indexable Inserts (Teknik Makina) Planing Head T210TM is a compact cutting head engineered for planing and facing applications using ODHT 0605 indexable inserts, offering a 43° cutting geometry for efficient chip evacuation and improved surface results 43° cutting geometry for efficient machining Compatible with ODHT 0605 indexable inserts Secure Torx fastening M5x12, T20 key required Compact 63 mm diameter for accessible setups Faster production through optimised 43° geometry The 43° cutting angle reduces radial cutting forces, which results in smoother engagement and lower vibration during planing and facing operations. This geometry supports steadier chip flow and contributes to a longer insert life, so production cycles become more predictable. For workshops that prioritise throughput and consistent surface quality, the combination of a shallow approach angle and stable insert seating translates into measurable efficiency gains without complex process changes. Precise fit and quick insert replacement for less downtime Designed with a 22 mm shank for secure mounting and a M5x12 Torx screw (T20), the head ensures repeatable seating of ODHT 0605 inserts. Indexable inserts are replaceable cutting tips that are mounted onto the head; when an edge becomes worn, the insert is rotated or replaced instead of replacing the whole tool. This method lowers tooling costs and shortens maintenance intervals, while the robust fastening system provides a reliable clamping interface to maintain cutting geometry throughout the tool life. Workshop-compatible dimensions and reliable handling With a 63 mm diameter, 40 mm overall length and a mass of 0.61 kg, the head balances stiffness and accessibility for confined setups. The relatively light weight and compact form make it suitable for machine spindles where space and balance considerations matter. Compatibility with Walter ODHT inserts simplifies stocking decisions and supports a modular tooling strategy, enabling rapid adaption to varied turning and facing tasks without extensive retooling. Contact Metav Werkzeuge today for delivery and technical guidance on the Planing Head T210TM; technical enquiries and stock checks are handled from Emmerich — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: T210TM Name: Planing head Model: for ODHT 0605 Indexable Inserts Manufacturer: Teknik Makina Numeric data Diameter: 63 mm Shank diameter: 22 mm Overall length: 40 mm Weight: 0.61 kg Cutting angle: 43° Number of cutting edges: 5 Special features Compatible with ODHT 0605 inserts (Walter) Fastening: Torx screw M5x12 (T20) Application: planing / facing operations Mounting: indexable inserts system FAQ What insert type is required for this head? The head is designed for ODHT 0605 indexable inserts; insert positioning and seating match the ODHT geometry used by Walter. Which fastening hardware is used to secure the insert? Fastening is via an M5x12 Torx screw, tightened with a T20 key to ensure reliable clamping and repeatable seating. Is the head suitable for compact or confined setups? Yes — the 63 mm diameter, 40 mm overall length and 0.61 kg weight are intended to balance stiffness with accessibility in tighter machine arrangements. Who supplies this product and where can technical information be requested? The item is supplied by Teknik Makina and available through Metav Werkzeuge; technical enquiries can be directed to info@metav-werkzeuge.com or +49 2822 7131930 Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a compact 63 mm diameter, internal coolant and nine cutting edges, this cutter head delivers precise facing with efficient chip control and long insert life — order directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head T730-1TM for LNMU 0303 indexable inserts — 63 mm, internal coolant (Teknik Makina) Face milling head designed for precise facing and finishing using LNMU 0303 indexable inserts; built for compact setups and optimised coolant delivery. 63 mm diameter for compact facing operations Internal coolant for improved chip evacuation Holds LNMU 0303 indexable inserts Nine cutting edges with 55° cutting angle Reliable finishing with compact dimensions The compact 63 mm diameter makes this cutter ideal where limited overhang or tight fixture space is a concern while still delivering consistent surfacing performance. The combination of a short overall length and a robust body reduces vibration, which in turn stabilises the cutting process and helps to achieve lower surface roughness. Designed for facing and light finishing, the tool provides an efficient balance between accessibility and rigidity, enabling predictable machining cycles in small-batch and series production. Improved process stability through targeted coolant Equipped with internal coolant, the head directs lubricant and coolant directly to the cutting zone, enhancing chip evacuation and heat control. This targeted supply reduces thermal distortion and contributes to longer insert life, particularly when machining challenging materials. Internal coolant also aids in keeping the cutting edges clear of built-up material, which maintains consistent cutting geometry and reduces unplanned tool exchanges — beneficial for both productivity and process reliability. Broad insert compatibility and secure clamping The head is configured to accept LNMU 0303 indexable inserts and is compatible with leading insert manufacturers, ensuring availability and flexibility for different grades and geometries. A secure clamping arrangement together with the supplied Torx specification (T8 key, screw M2.5x7) guarantees repeatable seating and fast index changes. The design minimises setup time while maintaining the seating torque required for stable cutting, which is particularly important in mixed-material workshops where frequent insert changes are common. Durable construction for consistent results Manufactured by Teknik Cutting Tools, the T730-1TM is built to withstand routine workshop demands: a balanced mass and robust connection reduce run-out and help preserve insert life. The nine cutting edges arranged at a 55° cutting angle provide a favourable compromise between chip thinning and cutting force distribution, allowing efficient material removal with reduced surface tearing. Routine maintenance focuses on simple checks of screw torque and coolant passages, keeping downtime to a minimum and supporting continuous production. For straightforward procurement or machining advice on the Teknik Cutting Tools T730-1TM face milling head with internal coolant, contact Metav Werkzeuge for a tailored recommendation and delivery from our Emmerich facility. Technical data SKU: T730-1TM ECLASS: 21181015 Product type: Face milling head Manufacturer: Teknik Cutting Tools Facts Diameter: 63 mm Overall length: 50 mm Weight: 0.766 kg Bore / attachment diameter: 22 mm Special features Internal coolant Compatible insert type: LNMU 0303 Compatible insert manufacturers: Tungaloy, OKE Number of cutting edges: 9 Cutting angle: 55° Torx key: T8 Torx screw: M2.5x7 FAQ What insert type fits this milling head? The head accepts LNMU 0303 indexable inserts; Teknik Cutting Tools configured the seating to match common LNMU geometries for secure clamping and straightforward indexing. Is the tool suitable for finishing operations? Yes, the combination of a compact diameter and a 55° cutting angle makes this head well suited to facing and finishing tasks where surface quality and stability matter. Does the head provide coolant to the cutting edge? Internal coolant is integrated into the design, enabling direct lubrication and improved chip evacuation at the insert edge on the T730-1TM face milling head. Which insert manufacturers are compatible? The head is compatible with inserts from Tungaloy and OKE; these established suppliers provide grades and geometries suitable for the intended applications. What is required for insert replacement? Insert replacement uses the specified Torx drive (T8) and M2.5x7 screws; correct torque and clean coolant passages are recommended to ensure repeatable seating and reliable performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust planing performance with a 55° cutting angle and a compact Ø63 mm body for consistent surface finish; compatible with HNGX 0906 indexable inserts from Pramet and fitted with a 22 mm mounting bore for secure clamping. Order this Planing cutter head directly via Metav Werkzeuge or consult our technical team for suitability. Planing cutter head T418TM – 55° cutting angle, Ø63 mm for HNGX 0906 indexable inserts (Teknik Makina) Planing cutter head T418TM engineered for heavy-duty steel machining where stable cutting geometry and rapid insert changes are required 55° cutting angle for robust surface planing Ø63 mm body with 6 cutting edges 22 mm mounting bore for secure clamping Compatible with Pramet HNGX 0906 inserts Consistent cutting geometry for reliable steel machining The head offers a 55° cutting angle which balances cutting forces to reduce chatter and improve component finish during planar operations. Matched to the HNGX 0906 indexable insert family from Pramet, the assembly provides repeatable edge positioning for predictable tool life. The combination of the trimmed projection and the head diameter ensures stable engagement with the workpiece, enhancing process reliability when machining mild and alloyed steels. This stability translates directly into fewer rejects and less rework on precision parts. Fast, secure mounting that reduces downtime Designed with a 22 mm mounting bore and fixed using an M4.5x11 screw tightened with a T15 Torx key, the unit provides a secure connection to the toolholder while allowing straightforward maintenance. The indexable inserts are changed without regrinding, keeping maintenance intervals short and predictable. At 0.518 kg, the head contributes modest mass for improved balance without imposing unnecessary load on the spindle. These attributes make the component suitable for shop floors that value quick tool swaps and consistent process uptime. Practical benefits for workshop productivity With 6 cutting edges available on the face system and an overall length of 40 mm, the cutter head supports efficient material removal and predictable truing routines. The Ø63 mm body design concentrates rigidity at the cutting zone, which assists in achieving a better surface finish and lower vibration at moderate feeds. For production environments aiming to reduce cycle times while maintaining dimensional accuracy, the design offers a clear, efficiency-led advantage. Compatibility with a recognised insert grade ensures access to a wide range of cutting materials and coatings where required. Compatibility and application notes The unit is supplied ready to accept the HNGX 0906 insert geometry and matches Pramet's insert range for a reliable fit. The head is primarily intended for turning/planing tasks in steel-dominant applications; material-specific recommendations should be observed when selecting insert grades and cutting data. The compact diameter and mounting interface are suitable where space constraints or tight tool clearances exist, while the robust cutting angle supports stable finishing passes on flat and light-profile work. For availability, technical confirmation and delivery from Metav Werkzeuge, request a suitability check for the Teknik Makina planing cutter head T418TM — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and lead times. Technical data Article number: T418TM Manufacturer: Teknik Cutting Tools Diameter: 63 mm Cutting angle: 55° Mounting bore: 22 mm Overall length: 40 mm Cutting edges: 6 Weight: 0.518 kg Torx screw: M4.5x11 Torx key: T15 Compatible inserts: HNGX 0906 Compatible insert manufacturer: Pramet Bezeichnung (EN): for HNGX 0906 Indexable Inserts FAQ Which inserts fit this cutter head? The Planing cutter head T418TM is designed for HNGX 0906 indexable inserts and is compatible with the Pramet insert family specified for that geometry. What is the cutting angle and how does it influence performance? The 55° cutting angle of the T418TM balances cutting forces to reduce vibration and helps achieve a consistent surface finish in steel machining operations. How is the head secured to the holder? Mounting is via a 22 mm bore with an M4.5x11 Torx screw; the screw is driven with a T15 Torx key for secure clamping and straightforward removal. How many cutting edges are available during operation? The head configuration provides six cutting edges, offering efficient use of each insert and predictable change intervals. Is this head suitable for heavy steel machining? Yes, the Planing cutter head T418TM is intended for robust steel machining where a stable cutting geometry and secure insert seating are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 75° cutting geometry, compatibility with standard indexable inserts and a compact Ø63 mm body for efficient facing operations; order directly via Metav Werkzeuge or consult the technical team for application support. Face cutter head — 75° geometry for APKT 1604 / APXT 1003 inserts by Teknik Makina Face cutter head designed for precision facing and light shoulder milling with APKT 1604 and APXT 1003 indexable inserts 75° cutting geometry for balanced cutting forces Ø63 mm body for stable machining 4 cutting edges for uninterrupted productivity Stable cutting performance with optimised 75° geometry The compact cutter head delivers dependable metal removal thanks to its 75° cutting angle, which balances radial and axial forces to give a stable cut while maintaining a good surface finish. The head’s Ø63 mm diameter and 4 cutting edges reduce vibration during light facing and finishing passes, making it suitable for jobbing shops and small-batch production. This balanced geometry supports consistent chip formation and helps to extend the service interval of the indexable inserts. Quick set-up and secure clamping for reduced downtime Designed for compatibility with APKT 1604 and APXT 1003 indexable inserts from Korloy, the tool head uses an M4x10 Torx screw and is tightened with a T15 key, enabling fast insert changes and secure clamping. The 22 mm shank (mount) ensures straightforward mounting in compatible tool holders and reduces alignment time at the machine. Clear mechanical interfaces mean less fiddling at the workbench and a rapid return to production after tool changes. Robust design for predictable tool life and handling With a total length of 45 mm and a weight of 0.51 kg, this cutter head offers a compact solution that is easy to handle during set-up while still providing the stiffness required for finishing and light-medium machining. The construction supports long tool life, as indicated in the technical notes, and the four-edge arrangement allows economical index changes. The combination of compact dimensions and proven insert compatibility makes the component a practical choice for workshops seeking reliable facing capability without unnecessary complexity. Contact Metav Werkzeuge for tailored technical advice or to reserve the Teknik Makina face cutter head (SKU T308TM) with 75° geometry — consultants available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T308TM Brand: Teknik Makina Description: Face cutter head for APKT 1604 and APXT 1003 indexable inserts SKU: T308TM Core dimensions Diameter: 63 mm Shank (mount) diameter: 22 mm Total length: 45 mm Weight: 0.51 kg Number of cutting edges: 4 Cutting angle: 75° Features Compatible inserts: APKT 1604, APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 Long tool life (as specified) FAQ What inserts fit this cutter head? The face cutter head accepts APKT 1604 and APXT 1003 indexable inserts; these are specified for secure seating and correct cutting geometry. Which screw and key are required for insert clamping? Insert clamping is performed with an M4x10 Torx screw, tightened using a T15 Torx key to ensure reliable fixation. Can this head be used with Korloy inserts? Yes — the component is specified as compatible with Korloy indexable inserts in the APKT/APXT formats. What is the overall diameter and how does it affect stability? The head measures Ø63 mm; this diameter contributes to rotational stiffness and improved stability during facing operations. Is the product suitable for heavy roughing? The head is optimised for facing and light to medium finishing; for heavy roughing, a tool with larger diameter and different geometry is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise facing with the combination of 88° cutting geometry and a sturdy Ø 63 mm body for consistent surface finish and reduced rework; compatible with SNMX 1206 indexable inserts and fixed with M4x12.5 Torx screws for secure seating. Order the face milling head directly via Metav Werkzeuge or contact the consultants for application advice. Planmesserkopf T344TM – face milling head for SNMX 1206 indexable inserts, Ø 63 mm (Teknik Makina) The Planmesserkopf T344TM is a compact face milling head engineered for high-efficiency facing and finishing in CNC operations, designed to accept SNMX 1206 indexable inserts and to fit toolholders with a 22 mm shank 88° cutting geometry for improved surface finish Diameter Ø 63 mm for stable facing passes Compatible with SNMX 1206 indexable inserts Secured by M4x12.5 Torx screws (T15 key) Consistent facing quality from optimised geometry With its 88° cutting geometry, this face milling head reduces axial load and promotes a uniform chip flow, which directly improves surface finish and lengthens insert life. The head’s configuration of 6 cutting edges distributes cutting forces evenly, helping to avoid chatter during light finishing and medium metal removal. Engineers and production planners will appreciate the predictable behaviour in series production, where fewer corrective passes translate into measurable time savings. Robust mounting and quick serviceability Mounting and insert changes are straightforward thanks to the M4x12.5 Torx fastening and the included specification for the T15 key, enabling rapid servicing at the machine and minimising downtime. The compact overall length of 40 mm and the 22 mm shank support rigid clamping in smaller toolholders while keeping the assembly mass low at 0.574 kg, which helps reduce spindle load and vibration transmission during high-speed operations. These characteristics make the head suitable for cell manufacturing and frequent index changes. Seamless integration with standard tooling systems The head’s Ø 63 mm diameter and form factor allow straightforward integration into existing tooling inventories that use SNMX 1206 style inserts from Korloy and comparable manufacturers, simplifying spare-part logistics and inventory management. A standardised insert interface reduces tooling complexity and the number of unique items stocked. The combination of stable geometry and common insert compatibility supports cost-efficient production planning while maintaining the precision expected in modern machining environments. For fast technical guidance and delivery from Emmerich, contact Metav Werkzeuge about the Teknik Makina face milling head T344TM — expert advice and transparent logistics are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: T344TM Manufacturer: Teknik Makina Product name: Planmesserkopf Application note: for SNMX 1206 Indexable Inserts ECLASS: 21181015 Dimensions & core data Diameter: 63 mm Overall length: 40 mm Shank / mounting diameter: 22 mm Cutting angle: 88° Number of cutting edges: 6 Weight: 0.574 kg Fastening screw: M4x12.5 Features & compatibility Securing key: T15 (Torx) Compatible insert designation: SNMX 1206 Compatible insert manufacturer: Korloy Typical application: facing / finishing in CNC milling FAQ Which insert type fits this milling head? The face milling head accepts SNMX 1206 indexable inserts; compatibility with Korloy SNMX 1206 inserts is indicated for the Teknik Makina T344TM. What fastening hardware is required for insert replacement? Insert clamping is achieved with M4x12.5 Torx screws; a T15 Torx key is specified for service and replacement operations. Which shank or toolholder size is required? The head is designed for a 22 mm shank or mounting bore, providing a compact and rigid interface for smaller toolholders. How does the 88° cutting geometry benefit finishing? The 88° cutting geometry reduces axial load and evens chip formation, improving surface finish and extending insert life under typical facing conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the proven combination of precise geometry and secure clamping for reliable face milling results; the compact design and compatibility with BLMP 0603 indexable inserts reduce downtime and simplify tool stocking. Order this tooling via Metav Werkzeuge or contact our consultants for application advice. Face milling head T483TM – 63 mm diameter, for BLMP 0603 indexable inserts The face milling head T483TM is a compact milling head designed for efficient surfacing and face milling with BLMP 0603 inserts, suitable for industrial machining and workshop use. 63 mm diameter for broad material engagement 8 cutting edges for consistent surface finish Compatible with BLMP 0603 indexable inserts T8 Torx screw M3x6.2 for secure clamping Increased throughput from multiple cutting edges The compact milling head delivers a combination of small footprint and practical cutting geometry that supports continuous production. With a 63 mm diameter and 8 cutting edges, the tool spreads the cutting load across several inserts, which leads to reduced wear per edge and less frequent index changes. The 100° cutting angle is configured to favour stable engagement and improved surface contact; this geometry helps to maintain consistent cutting forces and a uniform finish, particularly on broad faces. For production planners, that translates into longer uninterrupted runs and fewer tool changes, improving overall machine utilisation. Quick insert changes and robust clamping reduce downtime This cutter head is engineered for straightforward maintenance: it accepts BLMP 0603 indexable inserts, allowing rapid replacement without regrinding. The clamping is secured with a T8 Torx key and M3x6.2 screws, providing a dependable mechanical lock that resists vibration in heavy-duty milling. The 50 mm overall length gives a compact overhang for improved rigidity, while the modest 0.672 kg mass supports easier handling and faster tool changes on the shop floor. For operations that value predictable set-up times, the availability of standard screws and keys simplifies spare-part management. Versatile head for shop and industrial workbenches Designed for face milling and surfacing tasks, the head suits a wide range of machining scenarios where a balanced mix of productivity and finish quality is required. The use of indexable technology means a cost-efficient approach to reconditioning: worn insert corners are indexed or replaced rather than the whole tool being discarded. The head’s geometry supports consistent chip removal and stable machining, aiding technicians with differing experience levels to achieve repeatable results. For customers who require clarity on fitment or application specifics, Metav’s product descriptions are supported by technical data and in-house expertise to guide selection and maximise tool life. Contact Metav Werkzeuge for availability, tailored application advice and to discuss the Teknik Makina face milling head T483TM suited to BLMP 0603 inserts Technical data Article number: T483TM Label: 63mm Planmesserkopf BLMP 0603 L50mm Manufacturer: Teknik Makina SKU: T483TM Specifications Diameter: 63 mm Overall length: 50 mm Weight: 0.672 kg Cutting edges: 8 Cutting angle: 100° Features For BLMP 0603 indexable inserts Compatible with Taegutec inserts Torx key: T8 Torx screw: M3x6.2 ECLASS: 21181015 FAQ What insert type does this head accept? The head is designed for BLMP 0603 indexable inserts; suitable inserts from Taegutec are compatible with the mounting geometry. How many cutting edges are active during milling? The head holds 8 cutting edges, which spreads cutting forces and helps maintain surface quality during face milling. What fastening hardware is required for the inserts? Inserts are secured with M3x6.2 screws tightened with a T8 Torx key; follow the insert and screw manufacturer’s torque recommendations. Is the head suitable for compact toolholders and short overhangs? Yes. With a 50 mm overall length and a compact mass of 0.672 kg, the head is appropriate for applications where rigidity and short overhang are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of high material removal rates and precise indexable-insert clamping for consistent batch results; the combination of a 63 mm cutting diameter and five cutting edges reduces cycle times while maintaining surface quality. Order the cutter directly via Metav Werkzeuge or consult Metav’s specialists for process integration advice. Round insert milling cutter T284TM — 63 mm diameter, for RDMT 12T3 indexable inserts (Teknik Makina) A Round insert milling cutter T284TM designed for use with RDMT 12T3 indexable inserts, offering stable peripheral cutting for face and shoulder milling in CNC applications. 63 mm diameter for broad contact area Five cutting edges for smooth material removal 22 mm shank for secure toolholder fit Torx clamping system (T15) for repeatable locking High-throughput machining with verified cutter geometry The T284TM is configured to deliver consistent chip formation through its five cutting edges, which spreads wear and extends the service life of each indexable insert. Using RDMT 12T3 inserts enables rapid replacement without regrinding, so tool downtime is minimised and productivity is raised. The larger 63 mm diameter increases effective engagement during face operations, reducing the number of passes required for a given area and improving cycle-time efficiency. For shops aiming to stabilise throughput, the tool’s geometry supports steady cutting forces and predictable surface finish. Robust clamping and simple maintenance for reliable setups Clamping integrity is essential for repeatable results: the cutter uses a locking screw M3.5 and a Torx screw M3.5x8.5 secured with a T15 key, delivering a secure insert seat and low vibration under load. The standard 22 mm shank matches common toolholders, enabling a firm connection between spindle and cutter that helps reduce runout and chatter. Because inserts are indexable, maintenance is limited to periodic screw checks and insert changes, which shortens set-up times and lowers indirect production costs. The design supports routine workshop procedures without specialised fixtures. Tooling compatibility and straightforward integration The cutter’s specification is suitable for integration into conventional milling tool libraries and is listed under eClass and ETIM classification for system compatibility checks. Its measured total length and shank diameter simplify path planning and holder selection in CAM, while the documented screw and key sizes enable correct torque procedures to be followed on the shop floor. Using standardised inserts such as RDMT 12T3 helps centralise inventory across multiple machines and reduces complexity in reordering spare parts from suppliers like Metav Werkzeuge. The balanced design and clear technical data assist engineers in validating the cutter for production tasks. Secure production-ready cutters from Teknik Makina via Metav Werkzeuge — contact Metav Werkzeuge’s specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed ordering and integration support Technical data SKU: T284TM Manufacturer: Teknik Makina Product: Round insert milling cutter (Rundplattenfräser) Application: for RDMT 12T3 indexable inserts Dimensions & weight Diameter: 63 mm Total length: 40 mm Shank diameter: 22 mm Cutting edges: 5 Weight: 0.468 kg Design & special features Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 eClass: 21180902 ETIM: EC011860 FAQ Which inserts fit this cutter? The Round insert milling cutter T284TM is designed for RDMT 12T3 indexable inserts and accepts inserts manufactured to that designation. What are the cutter’s main dimensions? Diameter 63 mm, total length 40 mm, shank diameter 22 mm and weight 0.468 kg are the principal dimensional values for the T284TM. What clamping hardware is required? Clamping hardware comprises a locking screw M3.5 and a Torx screw M3.5x8.5; a T15 Torx key is used for secure tightening. How many cutting edges does the cutter have? The cutter features five cutting edges, which distribute wear and contribute to smoother cutting action. Is the shank compatible with standard holders? The 22 mm shank size conforms to holders and adaptors designed for 22 mm tool shanks, facilitating straightforward installation in standard toolholders. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑throughput milling solution that combines a 63 mm cutting diameter with 6 cutting edges for consistent stock removal; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Indexable insert face mill T285TM – 63 mm, 6‑edge cutter by Teknik Makina The Indexable insert face mill T285TM is a compact face‑milling cutter engineered for efficient metal‑removal tasks using RDMT 12T3 indexable inserts, ideal where stable clamping and quick insert changes are required 63 mm cutting diameter 6 cutting edges for steady removal Shank Ø 22 mm for secure clamping Compatible with RDMT 12T3 inserts Greater throughput from a compact cutter head With a 63 mm diameter and 6 cutting edges, this face mill delivers a favourable balance between material removal and surface control. The distribution of multiple cutting edges reduces load per insert, which leads to smoother cutting and extended insert life. For operations where fixture space is limited, the compact geometry supports efficient face milling without compromising removal rates. The result is a tool that promotes process reliability and predictable cycle times. Quick, secure insert changes to cut downtime The head accepts RDMT 12T3 indexable inserts and uses a M3.5 locking screw with a M3.5x8.5 Torx screw (Torx key T15) for fixation. This standardised fastening enables rapid, repeatable insert replacement and simple torque control, so tool changeovers are fast and reproducible. Indexable inserts allow worn edges to be rotated or replaced without regrinding, reducing maintenance time and keeping machines productive. Stable clamping and consistent running accuracy A Ø 22 mm shank and compact overall length (40 mm) provide a rigid connection to the spindle, helping to minimise vibration and improve surface finish. The cutter’s mass (0.5 kg) is distributed to favour stability in short overhang setups, which contributes to dimensional consistency across workpieces and reduces the need for secondary finishing steps. Designed for adaptable face‑milling in confined setups The modular concept supports a wide range of face‑milling tasks in workshops and production lines where space, accessibility and changeover speed matter. The use of industry‑standard RDMT inserts permits selection of grades and geometries to match machining strategies. This tool is therefore suitable for manufacturers seeking compact, changeable tooling that fits into existing machining cells and clamping solutions. Supply reliability and partner support for production continuity Sourcing through an experienced partner ensures steady availability and technical guidance. Metav’s position as a precision partner and distributor supports dependable delivery and a broad accessory range, while proven logistics from Emmerich help to avoid supply interruptions. For machining teams focused on throughput and predictability, a combination of sturdy cutter design and reliable supply forms the backbone of sustained production. For tailored advice on Teknik Makina’s T285TM face mill and to secure prompt supply from Metav Werkzeuge in Emmerich, please call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T285TM Brand: Teknik Makina Designation: Indexable insert face mill For inserts: RDMT 12T3 eClass: 21180902 ETIM: EC011860 Facts Diameter: 63 mm Cutting edges: 6 Shank / mounting diameter: 22 mm Overall length: 40 mm Weight: 0.5 kg Torx screw: M3.5x8.5 Locking screw: M3.5 Torx key size: T15 Special features Compatible with RDMT 12T3 indexable inserts Compact face‑milling geometry Files: 62de7ef10f56dbb4de4dbf61, 62de7e670f56dbb4de4dbf15 SKU: T285TM FAQ What type of inserts does the cutter use? The face mill accepts RDMT 12T3 indexable inserts for repeatable performance and easy edge indexing. How are the inserts secured in the cutter head? Inserts are fastened with M3.5x8.5 Torx screws and a M3.5 locking screw; a T15 Torx key is used for assembly and torque control. Is the tool suitable for short‑overhang setups? Yes, the compact overall length of 40 mm and a Ø 22 mm shank support rigid clamping and reduced vibration in confined setups. Which brand and SKU should be referenced when ordering? Order using the SKU T285TM from Teknik Makina; citing the model ensures the correct indexable insert face mill is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, purpose-built milling head that combines a 63 mm cutting diameter, internal coolant and compatibility with RPMT 1606 indexable inserts to keep cycle times reliable and setup straightforward; order the (Rundplattenfräser T717-1TM) directly via Metav Werkzeuge or ask our consultants if needed. Rundplattenfräser — 63 mm indexable insert milling cutter for RPMT 1606 (Teknik Makina) The Rundplattenfräser is a compact indexable insert milling head designed for face and shoulder milling applications, accepting RPMT 1606 inserts and equipped with internal coolant for improved heat control and chip evacuation. Internal coolant for improved chip evacuation 63 mm diameter for versatile face milling Compatible with RPMT 1606 indexable inserts Faster, more consistent metal removal for production work This milling head is engineered to raise throughput by providing a stable cutting platform: the 63 mm diameter and 5 cutting edges distribute cutting forces evenly, reducing vibration and promoting steadier feeds. The cutter accepts standard RPMT 1606 indexable inserts, which simplifies inventory management and reduces downtime for insert changes. For production environments and jobbing shops where predictable cycle times matter, the combination of a balanced geometry and a compact overall length ensures effective material removal without excessive spindle load. Direct coolant delivery and improved chip control extend tool life Integrated internal coolant channels deliver fluid directly to the cutting zone, which lowers cutting temperatures and helps evacuate chips from the kerf. This focused cooling reduces thermal wear on the insert edges and supports a more consistent surface finish on workpieces. When used with compatible inserts — for example, Korloy RPMT 1606 grades — the head achieves a balance between cutting performance and insert longevity, making maintenance intervals more predictable and reducing the frequency of unscheduled stoppages. Simple integration into workshop and CNC setups Designed with practical installation in mind, the head’s 40 mm overall length and modest mass (approx. 0.509 kg) make it easy to fit into existing tool magazines and arbor systems without major adjustments. The tool comes as SKU T717-1TM and is manufactured by Teknik Cutting Tools, so specifying it in tooling lists is straightforward. Basic familiarity with indexable insert systems is sufficient to change inserts quickly; the robust design supports both manual and automated change routines, helping to keep set-up times short and production steady. For precise face milling with internal coolant, request the Teknik Makina T717-1TM via Metav Werkzeuge in Emmerich — contact our technical sales team for a tailored recommendation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T717-1TM Label: 63mm Rundplattenfräser RPMT 1606 L40mm mit Innenkühlung Product type: Rundplattenfräser Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.509 kg Cutting edges: 5 Eclass: 21180902 Special features Internal coolant Compatible with RPMT 1606 indexable inserts Recommended insert supplier: Korloy Suitable application: face/shoulder milling FAQ Which inserts fit this milling head? The T717-1TM accepts RPMT 1606 indexable inserts; Korloy grades are listed as compatible for balanced wear and performance. Is the tool suitable for automated tool changers in CNC machines? Yes, the Rundplattenfräser from Teknik Makina (SKU T717-1TM) has a compact form and controlled mass, making it suitable for integration into automated tool systems. How does internal coolant benefit machining with this cutter? Internal coolant on the T717-1TM directs fluid to the cutting edge, improving chip control and reducing insert temperature during face milling operations. What are the main measurable specifications to consider for setup? Key figures for setup are 63 mm diameter, 40 mm overall length and a weight of 0.509 kg, all listed for the Teknik Makina milling head. For which tasks is this milling head primarily intended? The T717-1TM is designed for face and shoulder milling tasks where stable cutting and easy insert changes with RPMT 1606 inserts are advantageous. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust milling solution with a Ø 63 mm cutter compatible with RPMW 1204 indexable inserts and a 22 mm shank for rigid mounting; this combination delivers steady metal removal and straightforward insert changes. Order directly via Metav Werkzeuge or consult our specialists for application advice. Round indexable face mill — for RPMW 1204 indexable inserts by Teknik Makina, Ø 63 mm, 5 cutting edges The Round indexable face mill is a compact, high-stability cutter intended for medium to heavy milling operations with RPMW 1204 inserts, suitable for workshops and production environments Ø 63 mm cutting diameter Accepts RPMW 1204 inserts (Korloy compatible) Five cutting edges for stable material removal 22 mm shank for rigid mounting Higher throughput with consistent surface results The tool’s Ø 63 mm diameter and five cutting edges enable an improved metal removal rate while maintaining a consistent surface finish. Using standard RPMW 1204 indexable inserts reduces changeover time and keeps cycle times predictable; the insert geometry provides balanced cutting forces that help prevent chatter and extend productivity on batch runs. For CNC applications the combination of insert repeatability and cutter stability translates into fewer rework cycles and more predictable process outcomes. Secure clamping and simple indexable insert changes A 22 mm shank ensures a rigid connection to standard tool holders, reducing runout and vibration during heavy cuts. Insert retention uses a M4x7 Torx screw with a T15 key, enabling quick, repeatable insert replacement and minimising non-productive time. Compatibility with Korloy RPMW 1204 inserts means a broad choice of grades and coatings for specific materials — a practical advantage when switching between aluminium, steel or mixed-material batches in a job shop. Built for workshop integration and tool-life optimisation Constructed for regular industrial use, the cutter suits frequent insert indexing and planned maintenance schedules; the modular nature of indexable systems reduces tooling spend compared with solid‑carbide alternatives. By combining a standard insert size with a compact cutter body, this solution supports inventory rationalisation and faster reaction to changing production demands. The overall design focuses on reliability and serviceability, helping maintain uptime and predictable output in a busy machining environment. For reliable delivery or technical matching, request the TekniK Makina face mill through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid supply from Emmerich Technical data Article number: T712TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 63 mm Overall height: 40 mm Number of cutting edges: 5 Shank diameter (aufnahme): 22 mm Special features For RPMW 1204 indexable inserts Compatible with Korloy RPMW 1204 inserts Torx key size: T15 Torx screw: M4x7 FAQ What insert type does this cutter accept? The cutter accepts RPMW 1204 indexable inserts; compatible grades from Korloy are commonly used for different materials. How is an insert secured in the cutter? Inserts are fastened with an M4x7 Torx screw using a T15 key, allowing straightforward, repeatable insert changes. Which shank size is required for mounting? A 22 mm shank is required; the design provides a rigid connection to standard holders for reduced runout. Is this cutter suitable for heavy machining? With its five cutting edges and rigid body, the tool is appropriate for medium to heavy milling where stable cutting forces are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a reliable combination of efficiency and secure clamping: the 63 mm cutter head with internal coolant and four cutting edges gives stable face milling and extended insert life. Order the tool via Metav Werkzeuge or contact the advisers for specification support and delivery from Emmerich. Planing cutter head T687-1TM – 63 mm diameter, internal coolant (Teknik Makina) Planing cutter head for WNMX 1305 indexable inserts, designed for precise face milling with internal coolant and four cutting edges 63 mm diameter for stable face milling Internal coolant supply for improved chip evacuation Suitable for WNMX 1305 Korloy indexable inserts Four cutting edges for higher material removal rates Improved machining performance through optimised geometry The 63 mm diameter body and four cutting edges are combined to deliver a consistent cutting profile and higher material removal per pass. By using standard WNMX 1305 indexable inserts the assembly enables rapid insert replacement and predictable tooling costs. The tool body’s balanced dimensions and compact overall length of 50 mm reduce vibration during facing operations, which supports a smoother surface finish and longer insert life. This rational setup benefits production workflows where cycle time and repeatability are decisive. Coolant-fed design and secure fastening for uptime An integrated internal coolant channel directs cutting fluid close to the cutting zone, supporting effective chip evacuation and thermal control; this reduces wear on insert edges and helps maintain machining tolerances. Fastening relies on a Torx T15 drive and M4x10 screws, ensuring repeatable clamp force and straightforward maintenance. The compact mass (approx. 0.752 kg) together with the precise clamping system simplifies tool changes and contributes to consistent spindle loads during high-precision facing tasks. Compatibility and workshop integration for efficient tooling management The cutter head is configured for Korloy-specified WNMX 1305 inserts, allowing immediate integration into existing indexable-insert inventories and minimising tool-change complexity. The unit’s SKU T687-1TM identifies the variant for procurement and inventory control. As a robust component from Teknik Makina, this cutter body supports standardised production procedures and reduces setup variability, making it suitable for serial facing, skimming and light surfacing operations where predictable results and throughput are priorities. For specification advice or to secure the Teknik Makina 63 mm cutter head T687-1TM, contact Metav Werkzeuge in Emmerich for professional guidance and reliable supply Technical data Article number: T687-1TM Product type: Planing cutter head Compatible inserts: WNMX 1305 Compatible insert manufacturer: Korloy Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 50 mm Shank / bore diameter: 22 mm Cutting edges: 4 Weight: 0.752 kg ECLASS: 21181015 Special features Internal coolant Torx key: T15 Torx screw: M4x10 For WNMX 1305 indexable inserts SKU: T687-1TM FAQ Which indexable inserts fit this cutter head? The planing cutter head accepts WNMX 1305 indexable inserts; compatibility is specified for Korloy inserts and identified by SKU T687-1TM. Is coolant delivered to the cutting edge? Yes, the cutter body features internal coolant that feeds the cutting zone to support chip evacuation and reduce insert wear. How many cutting edges does the tool have? The tool body is equipped with four cutting edges, enabling increased material removal and efficient facing cycles. What fastening components are required for insert mounting? Insert clamping uses a Torx T15 drive with M4x10 screws, providing secure and repeatable fixation. Can this cutter head be used with existing Korloy inserts in stock? The head is designed for WNMX 1305 inserts from Korloy, allowing direct use of compatible inserts already held in inventory. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact Ø63 mm diameter and 6 cutting edges for efficient face milling; the secure Torx fastening (M2.5x7 / T8) and a 22 mm bore ensure rigid clamping and reliable chip control — order via Metav Werkzeuge or consult the product specialists if required. Face milling head for APKT 1604 and APXT 1003 indexable inserts — Teknik Makina Face milling head designed for heavy-duty face milling operations with modern indexable inserts Compact Ø63 mm cutter head Accepts APKT 1604 and APXT 1003 inserts Six cutting edges for efficient cut Torx M2.5x7 fastening with T8 key Increased throughput with compact, rigid tooling The compact milling head delivers measurable productivity gains thanks to its Ø63 mm diameter combined with a short overall length of 45 mm, which reduces overhang and improves stiffness on the spindle. A 22 mm bore ensures a secure fit to the toolholder, lowering vibration and enabling higher stable feed rates. With 6 cutting edges, the toolhead supports sustained material removal while maintaining predictable tool life. These characteristics translate into shorter cycle times and fewer interruptions on the shop floor, making the component particularly suitable where consistent face milling performance is required. Reliable clamping and swift insert changes Secure clamping is achieved by the specified Torx assembly: M2.5x7 fixing screws tightened with a T8 key. This combination ensures consistent repeatability after insert changes and reduces the risk of movement under load. The head is engineered for common indexable geometries and is compatible with APKT 1604 and APXT 1003 types, including inserts from Korloy, which simplifies stockkeeping and tool preparation. The design supports quick replacement of cutting edges, helping to keep machine downtime to a minimum and supporting predictable production planning. Compact mass and pragmatic shop-floor benefits At just 0.63 kg, the milling head is light enough to limit additional spindle load yet robustly constructed to withstand regular machining cycles. The modest mass, paired with the reduced tool overhang, contributes to lower spindle wear and improved surface finish consistency. The installed 75° cutting angle helps achieve effective chip formation on typical face-milling routines, while the geometry supports both roughing passes and medium-finish operations without complex setup changes. Compatibility-focused design for efficient tooling systems Created as an indexable-insert holder, the head accepts APKT-style plates and is also listed for APKT 1003 variants, offering flexibility across similar insert formats. The specified interface dimensions and fastening standard allow integration into existing tool sets without the need for bespoke holders. For procurement and workshop managers, this means simplified inventory, fewer toolholders to maintain and a direct route to replacing wear items with a component that aligns with widely used insert standards. For reliable supply of this Teknik Makina face milling head (SKU T452TM) and tailored advice on integrating it into an existing tooling set, contact Metav Werkzeuge — our consultants in Emmerich will assist with selection and delivery. Technical Data Article number: T452TM Manufacturer: Teknik Makina Product: Face milling head Compatibility: for APKT 1604 and APXT 1003 indexable inserts Compatible insert manufacturer: Korloy Facts Diameter: 63 mm Cutting edges: 6 Overall length: 45 mm Bore / shank diameter: 22 mm Weight: 0.63 kg Cutting angle: 75° Special features Torx screw M2.5x7 Torx key T8 required Suited for APKT 1003 insert type ECLASS: 21181015 FAQ Which insert types fit this milling head? The face milling head is designed for APKT 1604 and APXT 1003 indexable inserts; it is also suitable for APKT 1003 plate formats and compatible with Korloy insert geometries. What fastening hardware is required for installation? Assembly uses M2.5x7 Torx screws tightened with a T8 key as specified for the Teknik Makina head (SKU T452TM). How does the 22 mm bore benefit machining performance? A 22 mm bore provides a rigid interface with the toolholder, reducing vibration and enabling more stable cutting conditions for improved surface finish and tool life. What are the principal dimensions and mass of the tool? Key dimensions are Ø63 mm diameter, 45 mm overall length, and a mass of 0.63 kg, supporting compact setups with limited overhang. Can this head be used for both roughing and finishing? Yes. The geometry and 75° cutting angle provide versatility for robust material removal as well as medium-finish operations when paired with appropriate inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise face milling with a compact, robust head that accepts BLMP 0904 indexable inserts; the combination of a 63 mm diameter and seven cutting edges delivers consistent material removal and reduced downtime. Order directly via Metav Werkzeuge or ask our consultants for application advice. Planmesserkopf T487TM — face-milling head for BLMP 0904 indexable inserts, Ø63 mm, 7 edges (Teknik Makina) A Planmesserkopf engineered for reliable face milling and straightforward integration on machines using BLMP 0904 indexable inserts. Compatible with BLMP 0904 indexable inserts 63 mm diameter for efficient face milling Seven cutting edges for improved productivity M3.5 Torx clamping screw, T10 key size Consistent cutting performance and process stability The milling head is designed to deliver dependable results in face-milling operations. With a 63 mm diameter and a 100° cutting angle, the tool provides a broad engagement area that spreads cutting forces and supports stable chip formation. Fitted for BLMP 0904 indexable inserts, the head’s geometry helps maintain a uniform surface finish and repeatable results across multiple workpieces. The relatively low mass of 0.615 kg contributes to rotational balance, lowering vibration and promoting longer tool life. Secure clamping and easy maintenance A reliable clamping system reduces unplanned stoppages: the unit uses an M3.5 Torx clamping screw (size M3.5x8.5) and requires a T10 key for insert retention. This standardised fixing method ensures firm seating of the insert and straightforward replacement when a cutting edge is exhausted. The design minimises maintenance time while preserving cutting stability, enabling rapid insert changes without specialised fixtures or time-consuming procedures. Designed for productive machining environments The head’s compact 50 mm overall length and 22 mm arbor interface support versatile setup options on milling spindles and toolholders. Offering seven cutting edges, the tool extends the service interval between indexings and reduces inventory turnover for inserts. Compatibility with Taegutec BLMP 0904 inserts provides access to widely available insert grades and geometries, simplifying procurement and allowing easy optimisation for specific materials or cutting conditions. Practical application notes and integration Intended for face-milling tasks using indexable inserts, the head suits CNC milling and multifunction machining centres where reliable repeatability and quick tool changes are required. The 22 mm attachment diameter ensures a rigid connection to the toolholder, while the nominal dimensions make it straightforward to balance and set up. For specific machine interfaces or advanced balancing requirements, consult the technical advisors at Metav Werkzeuge to match spindle and clamping conditions to production needs. For Teknik Makina quality and practical advice on selecting the right face-milling head for your production, contact Metav Werkzeuge — reach the team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss supply from our Emmerich stock Technical Data SKU: T487TM Manufacturer: Teknik Makina Product name: Planmesserkopf T487TM Compatible inserts: BLMP 0904 Compatible insert manufacturer: Taegutec Facts Diameter: 63 mm Shank / arbor diameter: 22 mm Weight: 0.615 kg Cutting edges: 7 Overall length: 50 mm Cutting angle: 100° Special features For BLMP 0904 indexable inserts M3.5x8.5 Torx clamping screw Torx key size T10 Compact design for stable face milling FAQ Which inserts fit this milling head? The milling head is specified for BLMP 0904 indexable inserts; insert grades from Taegutec that use the BLMP 0904 form are compatible. What is the arbor or shank diameter for mounting? The tool accepts a 22 mm attachment interface as stated in the specification. How many cutting edges does the head provide and what is the benefit? The head features seven cutting edges, which extends the usable life per index and reduces the frequency of insert changes during production. Which clamping screw and key size are required for insert retention? Clamping is via an M3.5x8.5 Torx screw; the corresponding key size is T10. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 63 mm diameter milling solution with internal coolant and a compact 40 mm overall length for reliable face cutting. The combination of a 45° cutting angle and five insert positions ensures efficient material removal and improved surface finish — order this tool via Metav Werkzeuge or consult our specialists for application support. Face milling head for SDMT 1204 indexable inserts — 63 mm, internal coolant (Teknik Makina) The face milling head is a compact cutting tool designed for use with SDMT 1204 indexable inserts, delivering controlled face milling and finishing operations where coolant-through capability and a 45° cutting geometry improve productivity. 63 mm diameter for stable cutting Internal coolant through tool body Compatible with SDMT 1204 inserts Compact 40 mm overall length Higher throughput with predictable cutting performance The milling head’s 63 mm diameter and 45° cutting angle are engineered to reduce cutting forces while maintaining high metal removal rates. The tool accepts SDMT 1204 indexable inserts, arranged across five cutting positions to distribute load and extend uptime between indexings. With internal coolant, chip evacuation and edge cooling occur directly at the cutting zone, which leads to longer insert life and more stable surface quality. For production environments seeking measurable increases in machining consistency, this solution supports reproducible cycle times and fewer unscheduled tool changes. Simple servicing and secure fastening for smooth operation Maintenance is straightforward: insert clamping uses proven screw technology with M4x10 fixing screws and a Torx T15 drive for positive engagement and repeatable torque application. The compact 40 mm overall length keeps the cutter close to the spindle, reducing overhang and minimising vibration, while the tool’s 0.421 kg mass lowers spindle load during rapid direction changes. These practical design choices reduce setup time and make insert replacement fast, ensuring minimal production interruption and predictable tool life. Clear integration and wide application potential Designed as a modular head suitable for conventional face milling tasks, the cutter integrates easily into existing toolholders and setups that accept standard milling heads for indexable inserts. Compatibility with ZCC-manufactured inserts simplifies procurement and spare-part logistics. The head’s straightforward functional design, including internal coolant and standard fixing hardware, allows the tool to be specified with confidence for workshops and production lines that prioritise dependable performance and easy maintenance. Technical terms such as “indexable insert” refer to replaceable cutting tips; these are rotated or replaced when worn, rather than replacing the entire tool body, which reduces tooling cost over time. For reliable face milling with coolant-through performance, contact Metav Werkzeuge for tailored advice and fast supply direct from Emmerich. Technical data SKU: T359-1TM Product type: Face milling head Model: Planmesserkopf for SDMT 1204 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.421 kg Number of cutters: 5 Cutting angle: 45° Special features Internal coolant: yes Compatible inserts: SDMT 1204 Compatible insert brand: ZCC Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this milling head? The milling head accepts SDMT 1204 indexable inserts; compatible insert brands include ZCC, as stated in the product data. Is internal coolant available and how does it help? Yes — the tool features internal coolant that directs fluid to the cutting edge, improving chip removal and extending insert life. What fastening hardware is required for insert replacement? Insert clamping uses M4x10 screws with a Torx T15 drive for secure, repeatable fastening. What are the key dimensions for machine setup? Important dimensions are 63 mm diameter and 40 mm overall length, which help define spindle clearance and overhang. What is the SKU for ordering and reference? The product is listed under SKU T359-1TM for ordering and stock queries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of the compact design, high cutting stability and simple insert replacement delivers reliable facing results in confined setups; order the head directly via Metav Werkzeuge or consult the technical team for application advice. Teknik Makina Facing Cutter Head T765TM — for 100° ENMX 0604 indexable inserts, Ø63 mm A Teknik Makina facing cutter head designed for precise face milling with ENMX 0604 indexable inserts, offering a compact diameter and a secure 22 mm interface for small- to medium-sized milling operations Compact Ø63 mm head for tight setups Seven cutting edges for consistent finish Compatible with ENMX 0604 indexable inserts 22 mm shank and M2.5x7 Torx screws for secure fit Precision result through optimised cutting geometry The facing head is engineered around a 100° cutting angle and seven cutting edges, which together reduce cutting forces and promote a uniform surface finish. The combination of a relatively small outer diameter and a large number of edges lowers individual chip load, making the tool suitable for finishing passes where dimensional consistency and surface quality are priorities. The construction ensures stable engagement even when working in restricted clamping envelopes, so process reliability is improved without sacrificing surface standards. Secure mounting and fast insert service for efficient turnarounds A firm mechanical interface is provided by the 22 mm shank and the specified M2.5x7 Torx screws with a T8 key, enabling repeatable seating and straightforward reassembly after insert changes. Compatibility with YG-1 manufactured inserts of type ENMX 0604 allows rapid supply sourcing and interchangeability. Reduced downtime is achieved through this standardised fastening approach, which simplifies maintenance routines and keeps machine utilisation high in production environments. Appropriate fit for compact milling applications Designed for face milling tasks where space is limited, the head’s Ø63 mm outer diameter and overall height of 50 mm make it a compact alternative to larger cutters. The small footprint supports operations on compact milling heads and machines with reduced clearance while still delivering effective material removal for finishing cycles. The tool suits manufacturers and workshops seeking a balance between tool compactness and consistent machining results. Built to industrial standards with distributor assurance Manufactured by Teknik Makina and distributed through Metav Werkzeuge, the head aligns manufacturing know-how with a European quality filter that supports dependable stock and delivery handling. The standardised insert format and robust fastening mean the component integrates into existing tool inventories with minimal adaptation. For purchasers requiring traceable, repeatable tooling performance, this combination reduces supply-chain friction and supports continuous production planning. For reliable facing performance choose the Teknik Makina T765TM via Metav Werkzeuge — contact Metav Werkzeuge for tailored application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: T765TM Manufacturer: Teknik Makina Core dimensions Diameter: 63 mm Overall height: 50 mm Shank / arbor diameter: 22 mm Cutting angle: 100° Number of cutting edges: 7 Features & compatibility For indexable inserts: ENMX 0604 Compatible insert manufacturer: YG-1 Screw type: M2.5x7 Torx key: T8 FAQ Which inserts fit this facing head? The facing cutter head accepts ENMX 0604 indexable inserts; compatibility with YG-1 manufactured inserts is specified for the T765TM head. What is the required toolholder or shank size? A 22 mm shank interface is used for mounting the head; ensure the machine arbor or holder accommodates a 22 mm diameter connection. How are the inserts secured? Inserts are retained with M2.5x7 screws tightened with a T8 Torx key, allowing consistent clamp force and straightforward replacement. What surface finish can be expected from the head? With its 100° cutting angle and seven edges, the head is optimised for low chip load finishing passes, producing uniform surface quality in typical facing operations. Is the head suitable for compact milling machines? Yes, the Ø63 mm diameter and 50 mm overall height make the head suitable for operations where clearance is limited and a compact solution is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com