Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of robust 63 mm diameter stability, internal coolant for improved chip evacuation and a compact 45 mm overall length to maintain steady face milling cycles; order this milling head via Metav Werkzeuge or consult our specialists for application-specific advice. Face milling head for ADKT 1505 indexable inserts — 63 mm, internal coolant (Teknik Cutting Tools) A face milling head designed for ADKT 1505 indexable inserts, delivering precise face milling with integrated internal coolant for improved tool life and process reliability. 63 mm diameter for stable engagement Internal coolant for improved chip control Five cutting edges for efficient material removal Compatible with ADKT 1505 inserts (ISCAR) Consistent metal removal with compact dimensions This milling head brings steady cutting performance through a balanced design and a 63 mm diameter, which reduces vibration at the cutting zone and supports repeatable surface finishes. The compact 45 mm overall length keeps the cutting forces close to the spindle, enabling more rigid clamping and lower deflection during heavy cuts. These design choices lead to reliable cycle times and reduced rework in production environments where reproducible results matter. Improved chip evacuation and tool life through internal coolant Built with internal coolant, the tool routes cutting fluid directly to the insert pocket to cool the cutting edge and clear chips effectively. Direct fluid delivery decreases thermal load on the insert, which helps to preserve edge integrity and extends the interval between indexings. For machining operations that demand continuous performance, the integrated coolant capability supports longer uninterrupted runs and cleaner workpieces without complex retrofit work. Practical fastening and maintenance details for shop floors The head uses a Torx T15 drive and M4x10 screws for secure insert clamping and straightforward maintenance. The five cutting edges configuration balances material removal rate with surface quality, allowing efficient stock removal on a variety of face-milling tasks. The robust construction and standardised fastening mean insert changes are quick and reproducible, minimising downtime on the shop floor and simplifying tool management. Compatibility and application-ready configuration Engineered for ADKT 1505 indexable inserts and compatible with inserts from ISCAR, the milling head is supplied in a ready-to-fit specification (SKU: T530-1TM). Its modest weight and standard interface make it suitable for a wide range of milling spindles and holders. The result is a practical, industry-aligned solution that integrates with existing tooling systems and supports predictable machining outcomes. For robust face milling performance with internal coolant and ADKT 1505 compatibility, contact Metav Werkzeuge to arrange supply of the Teknik Cutting Tools face milling head (SKU T530-1TM) and request application-specific guidance by email or phone Technical data Article number: T530-1TM Product type: Face milling head Suitable for: ADKT 1505 indexable inserts Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.582 kg Cutting edges: 5 Cutting angle: 90° Screw: Torx T15, M4x10 ECLASS: 21181015 Special features Internal coolant Compatible with inserts by ISCAR Five cutting edges Manufacturer: Teknik Cutting Tools FAQ Is the head compatible with ADKT 1505 inserts? Yes. The face milling head is designed for ADKT 1505 indexable inserts and is supplied as SKU T530-1TM for straightforward identification. Does this head provide internal coolant? Yes. The head features internal coolant to deliver fluid directly to the insert pocket, improving chip evacuation and edge cooling. How many cutting edges does the head use? The milling head is configured for five cutting edges, allowing efficient material removal while maintaining surface quality. Which fastening hardware is required for insert clamping? Insert clamping uses a Torx T15 drive with M4x10 screws as specified for repeatable and secure fastening. What are the principal dimensions to check for machine compatibility? Key dimensions are a 63 mm diameter and a 45 mm overall length; weight is 0.582 kg (SKU T530-1TM), useful for assessing toolholder balance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-performance cutter that combines 63 mm diameter, internal coolant and eight cutting edges for reliable face milling operations; order the component directly via Metav Werkzeuge or consult their specialists for application advice. Face milling head for BLMP 0603 indexable inserts — 63 mm with internal coolant (Teknik Makina) The face milling head for BLMP 0603 indexable inserts is a compact, robust cutter designed for efficient face machining, offering internal coolant delivery and a short 50 mm overall length for stable performance in confined setups. 63 mm cutter diameter Internal coolant supply For BLMP 0603 indexable inserts Eight cutting edges for efficient machining Compatible with Taegutec inserts Precise cutting geometry for consistent material removal The face milling head delivers a controlled cutting action thanks to its 63 mm diameter, eight cutting edges and a 100° cutting angle, which together reduce cycle times while maintaining surface quality. The indexed inserts (BLMP 0603) permit consistent edge replacement without regrinding, so the tool life of the assembly is maximised and downtime for reconditioning is minimised. This results in predictable productivity gains and easier process planning on the shop floor. Coolant-through design to cut heat and improve tool life An integrated internal coolant channel supplies cutting fluid directly to the insert pocket, improving chip evacuation and reducing thermal load at the cutting edge. With a 50 mm overall length and a compact arbor interface, the head supports effective cooling even in tight setups, which helps preserve insert geometry and maintain tolerances over longer production runs. The internal feed also reduces the need for external probing of coolant lines when installing the tool. Secure clamping and straightforward maintenance Insert retention employs a standard M3x6.2 mounting screw tightened with a T8 Torx driver for repeatable clamping force and quick changeovers. The design simplifies insert replacement and inspection, while the modest 0.672 kg weight helps maintain spindle balance and stability during higher-speed passes. Regular checks of screw torque and chip-pocket cleanliness will keep the tool performing reliably without complex maintenance regimes. Broad compatibility and practical application scope Built specifically for BLMP 0603 indexable inserts and compatible with inserts from Taegutec, the head suits general face milling tasks across production and toolroom environments. The compact diameter and short projection make it well suited to operations where clearance is limited but a high material removal rate is still required. The unit is identified under SKU T483-1TM for precise ordering and traceability. For procurement or to discuss application-specific details for the Teknik Makina face milling head with internal coolant, contact Metav Werkzeuge in Emmerich for expert advice and reliable delivery. Technical data SKU: T483-1TM Manufacturer: Teknik Makina eClass: 21181015 Product type: Face milling head Facts Diameter: 63 mm Overall length: 50 mm Arbor / shank diameter: 22 mm Weight: 0.672 kg Cutting edges: 8 Cutting angle: 100° Torx key: T8 Torx screw: M3x6.2 Special features Internal coolant For BLMP 0603 indexable inserts Compatible with Taegutec inserts Short projection for confined setups SKU reference T483-1TM FAQ Which insert type fits this cutter head? The cutter accepts BLMP 0603 indexable inserts; compatibility with Taegutec inserts is stated for the Teknik Makina face milling head (SKU T483-1TM). Is there coolant supply to the cutting edge? Yes — the head features internal coolant, delivering fluid directly to the insert pocket to aid chip evacuation and thermal control. What is the required screw and driver for insert fastening? Inserts are secured with an M3x6.2 screw, tightened using a T8 Torx driver for consistent clamping. What are the key dimensions to check before fitting? Relevant dimensions: 63 mm cutter diameter, 50 mm overall length and 22 mm arbor diameter; confirm these against the machine spindle and fixtures. Will the head affect spindle balance significantly? The unit weighs 0.672 kg; when installed according to spindle and balancing guidelines, the Teknik Makina head maintains running stability for typical face milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact design and efficient chip control offered by this 63 mm face milling head with internal coolant and seven cutting positions; its 50 mm overall length keeps setups tight while the robust fixing system ensures repeatable results. Order the face milling head directly via Metav Werkzeuge or ask our consultants if needed. Face milling head T487-1TM – 63 mm diameter, internal coolant (Teknik Makina) A face milling head designed for BLMP 0904 indexable inserts, optimised for compact face machining with internal coolant. Face milling head for BLMP 0904 indexable inserts 63 mm diameter for tight setups Internal coolant for improved chip evacuation Seven cutting positions, 50 mm overall length Boost throughput with compact, stable cutting performance The compact 63 mm diameter and 50 mm overall length make this tool ideal where space is limited but high face removal rates are required. With seven cutting positions, the head allows multiple engagement angles per revolution which spreads cutting forces and reduces transient loads; this results in steadier feeds and longer time between replacements. The robust body construction contributes to stable cutting conditions and lower vibration, so cycle times become more predictable and the machining process more efficient. Longer tool life and cleaner cuts through internal coolant Integrated internal coolant supplies cutting fluid directly to the cutting edge, improving lubrication and cooling at the point of contact. This reduces thermal load on the insert, lowers built-up edge and helps evacuate chips from the cutting zone. Compatibility with Taegutec BLMP 0904 indexable inserts means a wide choice of grades for steel or aluminium operations; indexable inserts simplify maintenance because edges can be rotated or replaced without regrinding, sustaining surface quality while saving operator time. Straightforward fitting and reliable clamping for predictable results Assembly and maintenance are simplified by the documented fixing hardware: the head uses a T10 Torx drive and M3.5x8.5 screws for secure retention of the insert seats, allowing quick insert changes and consistent torque application. The head’s mass of 0.615 kg balances rigidity with manageable handling during tool changes. Clear mechanical interfaces reduce setup variability, enabling repeatable positioning and consistent part tolerances across production runs. For reliable high-performance face milling from Teknik Makina, contact Metav Werkzeuge for technical advice and prompt supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T487-1TM Manufacturer: Teknik Makina Product type: Face milling head Description: 63 mm face milling head BLMP 0904 L50 mm with internal coolant Facts Diameter: 63 mm Overall length: 50 mm Weight: 0.615 kg Cutting positions: 7 Cutting angle: 100° Torx key: T10 Torx screw: M3.5x8.5 Internal coolant: yes Compatible inserts: BLMP 0904 Special features Compatible with Taegutec BLMP 0904 indexable inserts Internal coolant channel for targeted cooling Eclass: 21181015 FAQ Which insert type fits this head? This face milling head accepts BLMP 0904 indexable inserts; the design is compatible with Taegutec BLMP 0904 grades for a range of materials. Is there coolant supply through the tool? Yes, the head features internal coolant to deliver fluid directly to the cutting zone, improving chip evacuation and edge life. How many cutting positions are available? The cutter body provides seven cutting positions, allowing multiple effective edges per tool to extend service intervals. What torque tool is required for insert screws? Screw retention uses a T10 Torx drive with M3.5x8.5 screws; consistent torque application ensures repeatable clamping. Is the head suitable for compact setups? With a 63 mm diameter and 50 mm overall length, the head is designed for tight set-ups where space and accessibility are limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from robust chip control thanks to internal coolant and increased productivity from six cutting edges; the 63 mm diameter and 45° cutting angle deliver efficient, high-quality facing. Order the face milling solution directly via Metav Werkzeuge or consult their specialists for application advice. Face milling head for HNGX 0906 Indexable Inserts — 63 mm, internal coolant Face milling head for HNGX 0906 indexable inserts, designed for precision facing and efficient chip evacuation in production and job-shop environments. 63 mm diameter for wide material engagement Internal coolant for improved chip evacuation Six cutting edges for efficient material removal Compatible with HNGX 0906 inserts by Pramet Boost throughput with optimised cutting geometry and coolant The machining head combines a compact form with performance-focused features to raise cycle efficiency. Equipped with internal coolant, the tool directs cutting fluid precisely to the cutting zone, promoting superior chip control and thermal stability. The 63 mm diameter offers a broad engagement area, while the six cutting edges reduce index changes per component processed, resulting in fewer stoppages and higher net output. This configuration is especially suitable for repetitive facing operations where consistent removal rates and predictable wear behaviour are required. Improved surface quality and reduced cutting forces A 45° cutting angle reduces axial load and smooths the cutting action, which helps to produce a finer surface finish and lowers vibration risk during finishing passes. The head accepts HNGX 0906 style indexable inserts, enabling the use of well-known grades and geometries for varied materials. Selecting an appropriate insert grade balances tool life against surface requirements; using tougher grades extends life under heavier cuts, while fine-grain grades favour superior finishes. The result is a measurable improvement in part quality with predictable tool-change intervals. Maintenance-friendly design for reliable workshop use Maintenance and insert changes are straightforward thanks to the familiar fastenings and service items. The cutter is secured with M4.5x11 Torx screws and adjusted using a Torx T15 key for quick, repeatable clamping. Compatibility with inserts from established suppliers such as Pramet ensures easy sourcing and interchangeability. The head’s compact overall length of 40 mm and moderate mass support safe handling and fast set-up on modular arbors. Documentation of fastening torques and a simple replacement routine are recommended to preserve repeatability and to keep down-time to a minimum. Choose the Teknik Makina face milling head for internal-coolant facing operations and contact Metav Werkzeuge for tailored application advice or ordering assistance — Metav Werkzeuge’s specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: T418-1TM Label: 63 mm face milling head HNGX 0906 L40 mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.518 kg Cutting edges: 6 Cutting angle: 45° Torx key: T15 Torx screw: M4.5x11 Special features Internal coolant For HNGX 0906 indexable inserts Compatible with Pramet inserts Product type: Face milling head SKU/ID: T418-1TM FAQ Is this head compatible with Pramet inserts? The face milling head accepts HNGX 0906 indexable inserts and is listed as compatible with Pramet insert grades and geometries. How does the internal coolant improve machining? Internal coolant in this milling head directs fluid to the cutting edge, improving chip evacuation and thermal control for more consistent tool life and surface finish. What fasteners are used and which key is required? Clamping is achieved with M4.5x11 Torx screws; a Torx T15 key is used for insert changes and maintenance. Can this head be used for finishing and roughing? The tool’s 45° cutting angle and multiple cutting edges make it suitable for both finishing passes and higher-feed facing, depending on insert grade and cutting parameters. What is the product identifier for ordering? Order using SKU T418-1TM for the 63 mm face milling head with internal coolant. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of high material-removal rates and stable cutting performance thanks to a 63 mm face diameter and internal coolant; order directly via Metav Werkzeuge or contact our consultants for application advice. Face-milling head T838TM — 63 mm, internal coolant, for LNMX 0603 indexable inserts (Teknik Makina) A face-milling head designed for efficient face milling with LNMX 0603 indexable inserts in light to medium-duty production and workshop environments. 63 mm diameter for efficient face milling Internal coolant for better chip control Fits LNMX 0603 Korloy indexable inserts Nine cutting edges for consistent material removal Greater throughput with stable cutting performance The face-milling head delivers productive results through a broad 63 mm cutter diameter and nine cutting edges, which together increase the effective cutting engagement per revolution. Using standard LNMX 0603 indexable inserts means frequent edge changes are fast and economical, so cycle times remain predictable. For applications that require repeatable flatness on workpieces, this configuration provides a practical compromise between material removal rate and surface quality, helping to keep production lines moving with fewer interruptions. Improved tool life and surface finish through coolant feed Built-in internal coolant directs coolant to the cutting zone, reducing thermal load at the cutting edge and promoting consistent chip evacuation. The result is improved edge life and more consistent surface finish on each pass. Maintenance is simplified by standard fastenings: the cutter uses M3x7 screws tightened with a T8 Torx key, allowing quick indexable-insert changes and reduced downtime during shift changes or tool exchanges. Seamless integration and mechanical stability A compact overall length of 40 mm combined with a mounting diameter of 22 mm grants good rigidity and easy fitment in common toolholders. The relatively low mass of 0.766 kg enhances dynamic stability without compromising stiffness, making the head suitable for machines where balance and spindle load are considerations. Compatibility with Korloy for LNMX 0603 inserts helps to streamline inventory management and reduces the need for bespoke insert sourcing. Practical choice for shops that value reliability For job shops and production floors seeking economical, repeatable face-milling solutions, this cutter body offers a clear balance of performance and serviceability. The combination of insert standardisation, internal coolant and straightforward fastening contributes to predictable tool costs and less unscheduled maintenance. The result is a tangible benefit to workshop planning: stable operations and fewer surprises during production runs. For application guidance on Teknik Makina's T838TM face-milling head and to secure reliable supply from Metav Werkzeuge, contact Metav Werkzeuge for personalised advice and ordering from our Emmerich facility. Technical data Article number: T838TM Manufacturer: Teknik Makina Product type: Planmesserkopf Label: 63mm Planmesserkopf LNMX 0603 L40mm mit Innenkühlung Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.766 kg Cutting edges: 9 Mounting diameter: 22 mm Special features Internal coolant Fits LNMX 0603 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M3x7 (Torx key T8) FAQ Which inserts are compatible with this milling head? The face-milling head accepts LNMX 0603 indexable inserts and is specified to be compatible with Korloy inserts for that size. Does the tool provide internal coolant? Yes, the T838TM face-milling head features internal coolant, which feeds coolant directly to the cutting zone to improve chip control and edge life. What is the mounting diameter required for installation? The cutter requires a 22 mm mounting diameter and an overall length of 40 mm, offering a compact footprint for many toolholder systems. How many cutting edges are available per cutter body? This cutter body is specified with nine cutting edges, designed to distribute wear and maintain consistent engagement across the face. Which fastenings are used for the inserts? Inserts are secured with M3x7 screws tightened using a T8 Torx key, allowing quick and secure indexable-insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, a 63 mm diameter and compatibility with LNMX 1004 indexable inserts for reliable, flat-facing operations; order the cutter head via Metav Werkzeuge or consult our specialists for integration advice. Planing cutter head for LNMX 1004 indexable inserts — 63 mm, internal coolant, Teknik Makina The Planing cutter head is a compact face milling head engineered for precision surfacing with LNMX 1004 indexable inserts, suitable for robust workshop and light production use. 63 mm diameter for broad surfacing Internal coolant for extended insert life Compatible with LNMX 1004 Korloy inserts Seven cutting edges for continuous machining 90° cutting angle for flat finishing Consistent flatness and reduced rework The face milling head delivers a stable cutting geometry that translates into uniform surface finish and reduced secondary operations. With a 90° cutting angle, the tool produces true planar faces, which lowers the need for additional machining passes. The head’s mass and geometry ensure stable chip evacuation and consistent contact between insert and workpiece, resulting in fewer rejects and improved throughput for batch surfacing tasks. Enhanced tool life through internal cooling Equipped with internal coolant, the cutter head actively channels coolant to the cutting zone to control temperature and flush chips. This targeted cooling reduces thermal load on inserts, which extends cutting edge life and maintains cutting performance over longer cycles. For production environments where downtimes are costly, the improved insert longevity and heat control translate directly into lower tooling consumption and steadier process windows. Straightforward mounting and secure clamping Designed for reliable workshop handling, the head uses M4x10 torx screws and a T15 Torx interface for secure clamping of inserts and simple changeover. The standardised fastening means quick maintenance intervals and minimal setup time. The compact overall length of 40 mm and manageable mass of 0.47 kg support easy handling on the toolholder and reduce centrifugal imbalance on mid-speed spindle applications. Compatibility and flexible integration Built for LNMX 1004 indexable inserts and compatible with inserts from Korloy, the cutter head supports a wide range of insert grades and geometries, enabling adaptation to different materials and surface requirements. The head’s seven cutting edges allow staged feed strategies that keep feed rates productive while retaining finish quality. Marked as SKU T507TM, this component fits into standard surfacing toolchains and can be specified where flat, repeatable results are required. For tailored advice on integrating the Teknik Makina cutter head with internal coolant (SKU T507TM) into existing setups or to secure stock for upcoming production runs, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — fast supply from our European distribution hub Technical data SKU: T507TM Manufacturer: Teknik Makina Product: Planing cutter head for LNMX 1004 indexable inserts Core specifications Diameter: 63 mm Overall length: 40 mm Weight: 0.47 kg Cutting edges: 7 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Special features Internal coolant Compatible with LNMX 1004 inserts Compatible insert manufacturer: Korloy FAQ What materials can be machined with this cutter head? The cutter head is designed for general face milling tasks and, when fitted with appropriate LNMX 1004 insert grades, can be used across a range of common workshop materials; select the insert grade to match the specific substrate. How does internal coolant benefit machining with this head? Internal coolant channels cool and clear the cutting zone directly, which helps the LNMX 1004 inserts retain edge geometry longer and reduces the risk of heat-related wear during sustained surfacing operations. Which insert types fit this head? The head accepts LNMX 1004 indexable inserts and is compatible with insert grades and geometries supplied by Korloy, enabling adaptation of cutting performance to the application. Are the fastening screws and key included? The head uses M4x10 torx screws and a T15 Torx key interface for insert clamping; these specifications are listed so workshops can prepare the correct spares and maintenance tools. What is the SKU for ordering or referencing in procurement? The product is listed under SKU T507TM and is supplied by Teknik Makina for standard surfacing applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of compact dimensions, internal coolant and broad insert compatibility delivers stable facing performance and reduced cycle-time variability. Benefit from predictable surface finishes and simplified maintenance routines; order the tooling directly via Metav Werkzeuge or consult Metav's technical advisors for application matching. Face milling head for LOGU 0303 indexable inserts — 63 mm, L50 mm, internal coolant (Teknik Makina) Face milling head designed for precise facing operations with LOGU 0303 indexable inserts, optimised for short overhangs and reliable coolant supply 63 mm diameter for compact facing heads Internal coolant for improved chip evacuation Compatible with LOGU 0303 Kyocera inserts 50 mm overall length, robust 1.188 kg build Consistent surface quality through stable geometry The compact 63 mm body and the arrangement of the nine cutting edges ensure a uniform load distribution during facing, which directly improves surface finish and dimensional repeatability. A rigid toolholder geometry reduces deflection and vibration, resulting in fewer rejects and less need for rework. For workshops seeking predictable cycle times, the engineered balance between diameter and mass supports steady feed rates while maintaining component tolerances. Internal coolant that extends tool life and keeps chips clear Integrated internal coolant channels guide cutting fluid directly to the cutting zone, improving cooling efficiency and aiding chip evacuation. This targeted coolant delivery reduces thermal stress on the insert seats and helps prevent build-up on the cutting edges, which in turn prolongs insert life and reduces frequency of changeovers. For machining processes where coolant control is essential, the internal feed supports more consistent cutting conditions and helps protect finished surfaces. Fast insert changes and broad compatibility for reduced downtime Designed for use with LOGU 0303 indexable inserts and compatible with Kyocera clamping systems, the head accepts standard replacement inserts to simplify logistics. Secure clamping is achieved with M3x7 screws tightened using a Torx T8 key, providing repeatable seating and straightforward maintenance procedures. The combination of common fasteners and industry-standard insert geometry reduces spare-part complexity and shortens maintenance cycles. Compact dimensions and robust construction for reliable handling With a 50 mm overall length and a weight of 1.188 kg, the head is built to withstand routine workshop handling while limiting overhang. The shorter projection minimises bending moments at the spindle nose, which supports consistent machining under moderate loads and helps maintain tool life. Where space or access is restricted, the compact form factor enables efficient setup without compromising stability or repeatability. For tailored specification support or to order the Teknik Makina face milling head, contact Metav Werkzeuge—Metav's technical team can advise on insert selection, clamping parameters and process integration; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: T734-1TM ECLASS: 21181015 Label: 63mm face milling head LOGU 0303 L50mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 50 mm Weight: 1.188 kg Cutting edges: 9 Screw: M3x7 (Torx T8) Special features Internal coolant For LOGU 0303 indexable inserts Compatible with Kyocera inserts FAQ Which inserts fit this head? The head accepts LOGU 0303 indexable inserts and is specified as compatible with Kyocera insert systems for straightforward replacement. Is internal coolant integrated in the tool? Yes, the face milling head includes internal coolant channels to direct fluid to the cutting zone and aid chip evacuation. What fastening hardware is required for insert changes? Inserts are secured with M3x7 screws tightened with a Torx T8 key for repeatable clamping and simple maintenance. What are the main dimensions and the SKU? The tool has a diameter of 63 mm, an overall length of 50 mm, a weight of 1.188 kg and is listed as SKU T734-1TM. How many cutting edges does the head provide? The tool is equipped to use configurations that provide nine cutting edges, supporting continuous facing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-engineered face-milling head that combines a Ø63 mm cutting profile with 4 cutting edges and a 43° cutting angle for consistent surface quality and efficient chip evacuation — order directly via Metav Werkzeuge or consult our specialists for application advice. Planmesserkopf T262TM — Face-milling head for OFCR 0704 indexable inserts, Ø63 mm, 43° cutting angle (Teknik Makina) The Planmesserkopf T262TM is a robust face-milling head engineered for short setup times and reliable performance with OFCR 0704 indexable inserts, suited to light and medium-duty milling tasks in job shops and production cells For OFCR 0704 indexable inserts Ø63 mm diameter, compact profile 4 cutting edges for high productivity 43° cutting angle for fine surface finish Compact design for fast changeovers and precise results The compact Ø63 mm body and 22 mm mounting bore are designed to reduce overhang and improve stiffness, resulting in lower vibration and improved dimensional consistency. With a total length of 45 mm and a mass of 0.722 kg, the head keeps rotational inertia low, which benefits quicker spindle acceleration and shorter cycle times. These measurable attributes translate into concrete cost-efficiency: less machine idle time and a predictable process window for small-batch and repetitive tasks. Secure clamping and straightforward maintenance A clamping arrangement compatible with a BK300 clamping shank and a M8x18 locking screw provides secure fixation under standard cutting loads. The delivered maintenance key (4 Allen) simplifies insert changes and routine checks, so toolholders can be serviced quickly between shifts. This stable connection reduces the need for frequent re-setting, improving overall equipment effectiveness and lowering the probability of rejects due to loosening or misalignment. Surface quality and cutting performance explained The 43° cutting angle together with 4 cutting edges is optimised to produce a fine surface finish while maintaining efficient chip removal. A shallower approach angle spreads cutting forces and helps to avoid edge chipping on indexable inserts, which increases usable edge life and reduces tooling cost per part. For operators unfamiliar with the geometry, this means the head delivers balance between material removal rate and finish without aggressive toolpaths — ideal for finishing passes or light semi-finishing. Application areas and operational confidence Engineered for compatibility with OFCR 0704 indexable inserts, the tool head performs well on typical ferrous and non-ferrous workpieces in workshop and light industrial environments. Its compact footprint supports use on smaller mills and lathes where space and rigidity matter. Combined with Metav’s supply reliability, the component offers a practical route to modernising tooling stocks with minimal disruption, giving procurement teams confidence in both delivery and repeatable performance. For tailored application advice or to secure supply from Metav Werkzeuge, contact our specialists in Emmerich for expert guidance and dependable delivery. Technical Data Article number: T262TM Designation: Face-milling head for OFCR 0704 indexable inserts SKU: T262TM Facts Diameter: 63 mm Total length: 45 mm Weight: 0.722 kg Cutting edges: 4 Cutting angle: 43° Mounting bore: 22 mm Special features Suitable for OFCR 0704 indexable inserts Clamping shank: BK300 Locking screw: M8x18 Maintenance key: 4 Allen FAQ Which insert type fits this head? The head is made for OFCR 0704 indexable inserts and is supplied as a face-milling solution compatible with that insert geometry. Can the head be used on compact milling machines? Yes. The compact Ø63 mm design and 22 mm bore allow use on smaller spindles where reduced overhang and stiffness are advantageous. How is the insert clamped and changed? Insert changes are performed using the included 4 Allen key to secure the M8x18 locking screw; the BK300 clamping shank ensures stable fixation during operation. Is the component suitable for finishing work? The 43° cutting angle and four cutting edges are optimised to provide a fine surface finish, making the head suitable for finishing and light semi-finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 63 mm cutting diameter with internal coolant and compatibility for ONMU 0505 indexable inserts, this face mill head delivers steady material removal and consistent surface quality; order directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Face mill head for ONMU 0505 indexable inserts — 63 mm, internal coolant (Teknik Makina) The face mill head provides efficient facing with ONMU 0505 indexable inserts, designed for secure insert clamping and improved chip control in standard production environments. 63 mm diameter for broad facing Internal coolant for improved chip evacuation 6 cutting edges for high productivity Compatible with ISCAR ONMU 0505 inserts Increased throughput through optimised geometry With a 63 mm diameter and 6 cutting edges, this milling cutter head is engineered to raise metal removal rates while maintaining stability. The 45° cutting angle reduces cutting forces and spreads wear across the inserts, which helps preserve tool life and reduces the frequency of index changes. For shops focused on repeatable productivity, the arrangement of cutting edges and the cutter’s rigid mounting contribute to a predictable cycle time and consistent surface finish, translating into measurable process efficiency. Coolant-fed design for thermal control and chip evacuation The integrated internal coolant channel directs fluid close to the cutting zone, reducing heat generation at the edge and improving chip breakage. This results in lower thermal load on the inserts and a reduced risk of built-up edge, which in turn supports longer insert life and better component quality. The use of a coolant-fed head also simplifies coolant management compared with external-application setups, improving process reliability in wet machining operations and enhancing repeatability across batches. Simple setup and proven compatibility for straightforward integration Configured for ONMU 0505 indexable inserts from ISCAR and secured with M5x12 Torx screws (Torx key T20), the cutter head supports rapid insert changes and reliable clamping. The compact overall length of 45 mm and a mass of 0.652 kg make handling and tool change ergonomically manageable on most toolholders. Supplied as a ready-to-fit milling head, this solution eases retrofitting into established tool chains and helps maintain uptime by keeping changeover time low. The unit is supplied under Teknik Makina designation T794-1TM, enabling clear identification for spares and inventory control. For application advice or to request the Teknik Makina face mill head T794-1TM with internal coolant, contact Metav Werkzeuge for tailored guidance and supply from Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: T794-1TM Manufacturer: Teknik Makina Product type: Face mill head Suitable for inserts: ONMU 0505 Compatible insert brand: ISCAR Torx screw: M5x12 Torx key: T20 Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.652 kg Cutting edges: 6 Cutting angle: 45° Internal coolant: yes Special features Internal coolant channel Indexable inserts: ONMU 0505 Secured with M5x12 Torx screws Compact design for easy integration FAQ Which inserts are compatible with this milling head? The face mill head accepts ONMU 0505 indexable inserts and is listed as compatible with ISCAR inserts for straightforward procurement and replacement. Does the head support coolant-through operation? Yes, the head features internal coolant channels designed to deliver coolant directly to the cutting zone to aid chip control and thermal management. What screw and key are required for insert mounting? Insert clamping uses M5x12 Torx screws; a T20 Torx key is specified for secure and repeatable fastening of the inserts. Is this head suitable for retrofit into existing toolholders? The compact overall length (45 mm) and standard mounting form factor facilitate integration into many common toolholder systems; reference the designation T794-1TM for compatibility checks. How many cutting edges are available per cutter head? The head is equipped with six cutting edges, enabling efficient facing cycles and reduced changeover frequency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise 63 mm cutting diameter and integrated internal coolant to improve cycle reliability and surface quality; the T780-1TM combines stable cutting geometry with easy insert handling for uninterrupted production—order directly via Metav Werkzeuge or consult our technical team for application advice. Face milling head T780-1TM – 63 mm diameter, internal coolant (Teknik Makina) Face milling head T780-1TM for ONMX 0806 indexable inserts, engineered for high-rate face milling with controlled chip evacuation and secure insert clamping 63 mm diameter for broad face milling Internal coolant for direct edge cooling Five cutting edges for efficient indexing 45° cutting angle for smooth cutting Increase throughput with a stable cutting geometry The 63 mm diameter and a 45° cutting geometry deliver a balance between material removal rate and surface finish. By combining a larger working diameter with an inclined cutting angle, the head reduces instantaneous cutting forces and smooths chip load variations, which benefits cycle time and tool life. The 63 mm dimension and the 45° cutting angle are specified for predictable machining behaviour, making the component suitable for repetitive face-milling operations where consistent flatness and tolerances are required. Direct cooling at the cutting edge for longer insert life Integrated internal coolant channels feed cutting fluid close to the insert seat, improving heat dissipation and chip control. Direct coolant reduces thermal stress on the insert and the holder, which helps maintain cutting-edge geometry and extends the service intervals. For shops prioritising uptime, the internal coolant feature supports stable cutting temperatures and contributes to repeatable surface quality without additional external routing. Secure clamping and uncomplicated assembly Designed for ONMX 0806 indexable inserts, the head uses a Torx screw M5x12 with a T20 drive for positive clamping and straightforward index changes. The clear-fit design simplifies insert replacement and reduces downtime during tool changes. The robust fixing method ensures minimal play under load, preserving repeatability and concentricity when replacing inserts or reconditioning the cutting edge. Compact form with practical handling characteristics With an overall length of 40 mm and a mass of 1.063 kg, the milling head is compact yet substantial enough to support stable cutting. The construction facilitates balancing and vibration damping in moderate-duty face milling, while the weight contributes to cutting stability without compromising toolholder compatibility. The configuration with five cutting edges enables multiple indexable positions per insert, reducing consumable turnover and supporting economical production runs. Contact Metav Werkzeuge for tailored technical advice on the T780-1TM face milling head from Teknik Makina and to discuss suitability for specific machining tasks Technical Data Article number: T780-1TM SKU: T780-1TM Product type: Face milling head Facts Diameter: 63 mm Overall length: 40 mm Weight: 1.063 kg Cutting angle: 45° Number of cutting edges: 5 Special features Compatible inserts: ONMX 0806 Internal coolant: yes Torx screw: M5x12 Torx key: T20 Manufacturer: Teknik Makina FAQ Which inserts fit this milling head? The T780-1TM face milling head is designed for ONMX 0806 indexable inserts and provides the correct seat and clamping geometry for this insert type. Does the head provide internal coolant flow? Yes, the T780-1TM has internal coolant channels that deliver fluid directly near the insert seat to improve cooling and chip control. What fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M5x12 secured with a T20 key; this arrangement ensures positive clamping and easy insert indexing. Is the milling head suitable for compact toolholders? With an overall length of 40 mm and a balanced mass of 1.063 kg, this milling head suits applications where a compact, stable holder is required for face milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact 63 mm diameter, five cutting edges and built‑in coolant for reliable, high‑quality facing operations; order directly via Metav Werkzeuge or consult our technical team for application guidance. Face milling head 63 mm for SDHT 1204 indexable inserts — Teknik Makina The Face milling head is a robust cutter head engineered for precise facing operations with SDHT 1204 indexable inserts, offering a compact design for production and job‑shop environments. 63 mm diameter cutter head Compatible with SDHT 1204 inserts Internal coolant for chip control Five cutting edges for steady removal 45° cutting angle for smooth finishes Consistent surface quality through optimised geometry The milling head combines a compact footprint with an angled cutting geometry that promotes stable engagement and reduced vibration. With a 45° cutting angle and five cutting edges, the tool reduces cutting forces per tooth, which results in a more uniform surface finish and predictable tool behaviour. The indicated max cutting diameter 77 mm provides a clear expectation of working range, enabling planners to balance material removal rate and machine load for steady production cycles. Built‑in coolant for higher productivity and longer component life An integrated internal coolant channel directs fluid precisely to the cutting zone, improving chip evacuation and heat control during facing operations. This reduces thermal load on both insert and workpiece, which helps maintain dimensional accuracy over long runs. By improving cooling and chip flow, the cutter head supports higher sustained cutting parameters and contributes to extended tool life, lowering the frequency of index changes and machine stoppages. Fast, secure assembly and clear compatibility Designed specifically for SDHT 1204 indexable inserts, the head accepts standard torx fastening for quick insert changes. Fastening uses a M4.5x11 Torx screw operated with a T15 key, ensuring repeatable clamp force and straightforward maintenance. The compact shank with a 22 mm mounting diameter and an overall length of 45 mm keeps the mass low (approx. 0.63 kg), supporting stable spindle dynamics and simple handling during setup. Practical advantages for busy production environments This cutter head is tailored for shops that prioritise throughput and repeatability. The combination of compact dimensions, internal coolant and a multi‑edge configuration delivers reliable facing performance with reduced intervention intervals. Supplied by a dependable partner, the head fits into modular tool setups and spare‑parts strategies, helping operations reduce downtime and simplify inventory management while maintaining consistent machining results. For technical advice or to arrange supply of the Teknik Makina face milling head (SKU T300-1TM), contact Metav Werkzeuge for personalised support and ordering assistance. Technical Data SKU: T300-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Product type: Face milling head Compatible inserts: SDHT 1204 Indexable Inserts Facts Diameter: 63 mm Max cutting diameter: 77 mm Overall length: 45 mm Shank diameter: 22 mm Cutting angle: 45° Number of cutting edges: 5 Weight: 0.63 kg Special features Internal coolant Torx key: T15 Torx screw: M4.5x11 Designed for SDHT 1204 indexable inserts FAQ Which inserts are compatible with this milling head? The face milling head is designed for SDHT 1204 indexable inserts and is supplied as SKU T300-1TM by Teknik Makina for straightforward integration into standard tool systems. Does the cutter head provide coolant to the cutting edge? Yes, the head features internal coolant channels that deliver fluid directly to the cutting zone, improving chip evacuation and thermal control for the Teknik Makina face milling head (T300-1TM). What fastening hardware is required for insert changes? Insert clamping uses a Torx screw (M4.5x11) tightened with a T15 key, providing secure and repeatable fixation for SDHT 1204 inserts on this Teknik Makina head. Is the head suitable for automated tool changers and compact setups? With a 22 mm shank diameter and 45 mm overall length, the head is compact and well suited to modular tooling systems; the SKU T300-1TM from Teknik Makina balances size and rigidity for many production applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, coolant-enabled machining with robust insert compatibility makes this tool ideal for short-faced milling operations; the 63 mm diameter and internal coolant deliver enhanced chip control and consistent surface finish. Order the face milling cutter head directly via Metav Werkzeuge or ask our consultants if needed. Face milling cutter head T364-1TM by Teknik Makina — 63 mm diameter with internal coolant A face milling cutter head engineered for SDMT 09T3 indexable inserts, designed to bring stable, short-reach face milling performance to CNC and workshop environments. 63 mm diameter for compact face milling Internal coolant for improved chip evacuation Compatible with SDMT 09T3 ZCC inserts Six cutting edges for stable material removal Higher throughput from a compact tool body The compact 63 mm diameter of this cutter head concentrates the cutting action where it is needed, enabling efficient cycle times on short-face operations without excessive overhang. With six cutting edges, the design balances material removal rate and cutting stability, reducing vibration in interrupted cuts. The result is a measurable productivity gain on small- to medium-sized components and a reduction in non-productive time due to fewer insert changes. Consistent surface quality enabled by coolant-through design A built-in internal coolant channel directs cutting fluid to the insert tips, improving chip evacuation and cooling the cutting zone. This targeted delivery reduces edge chipping and thermal wear, which helps maintain a consistent surface finish across a production run. For users less familiar with coolant-through tooling, this means fewer deferrals for rework and more predictable part quality in aluminium and general steel machining tasks. Wide compatibility simplifies tooling logistics Specifically designed for SDMT 09T3 indexable inserts and compatible with ZCC inserts, the head reduces the need for unique insert families. The cutter head T364-1TM uses standard M3.5x8.5 screws secured with a T15 Torx key for reliable clamping; spare parts are widely available, which eases procurement. This compatibility reduces inventory complexity and supports faster tool changes on the shop floor, particularly useful for job shops handling varied batch sizes. Practical handling and straightforward maintenance With an overall length of 40 mm and a weight of 0.592 kg, the unit is easy to manoeuvre during tool set-up and changeover. Fast, secure insert replacement is supported by the Torx fastening system, keeping downtime low. Routine inspection focuses on insert condition and coolant passages; keeping the coolant channel clear prolongs insert life and preserves cutting performance, which delivers predictable operating costs over time. For tailored advice on integrating the Teknik Makina face milling cutter head T364-1TM into existing toolsets and to request delivery from Metav Werkzeuge, contact our technical consultants today Technical data SKU: T364-1TM Product type: Face milling cutter head Label: 63mm Planmesserkopf SDMT 09T3 L40mm mit Innenkühlung Manufacturer: Teknik Makina Core data Diameter: 63 mm Overall length: 40 mm Weight: 0.592 kg Cutting edges: 6 Special features Internal coolant: yes Compatible inserts: SDMT 09T3 Compatible insert manufacturer: ZCC Torque key: T15 Torx Screw: M3.5x8.5 FAQ What materials is this cutter head suitable for? The face milling cutter head T364-1TM is suitable for standard applications where SDMT 09T3 inserts are used; insert selection determines suitability for specific steels, aluminium or other alloys. Are the coolant passages compatible with standard machine coolant systems? Yes, the internal coolant channel of the T364-1TM is designed for integration with standard machine coolant feeds to deliver fluid directly to the insert interface. Which inserts must be used with this cutter head? The cutter head accepts SDMT 09T3 indexable inserts; compatibility with ZCC-branded inserts is specified for reliable fit and performance. How are the inserts fastened and replaced? Inserts are secured with M3.5x8.5 screws tightened using a T15 Torx key, allowing secure clamping and straightforward replacement during maintenance. Is the T364-1TM suitable for high-speed machining? The T364-1TM provides effective coolant delivery and stable clamping; appropriate insert grade and machine parameters determine suitability for high-speed applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 63 mm diameter, internal coolant and compatibility with SEET 12T3 indexable inserts to secure steady milling performance and repeatable surface quality; order the face milling head directly via Metav Werkzeuge or ask the consultants if needed. Face milling head for SEET 12T3 indexable inserts — 63 mm, internal coolant | Teknik Makina The face milling head is designed for use with SEET 12T3 indexable inserts and is intended for compact, high-stability milling applications in production and job-shop environments. 63 mm diameter for compact toolpacks Internal coolant for improved chip evacuation Compatible with SEET 12T3 indexable inserts 45° cutting angle for reliable finishing High-throughput milling with consistent results The cutter is engineered to deliver steady material removal while maintaining surface finish. With a 63 mm diameter and a 45° cutting angle, the head balances cutting forces and generates predictable chip formation, which reduces vibration and improves cycle-time stability. The 5 cutting edges distribution permits uniform wear and simple indexing, supporting efficient batch production and reduced operator intervention. Improved tool life through internal coolant and secure fixing Built-in internal coolant supplies cutting fluid directly to the cutting zone, supporting lubricity and cooling where it matters most; this reduces heat-induced wear and helps prevent edge chipping during interrupted cuts. Fastening is performed with M3.5x11 Torx screws (Torx key T15), ensuring reproducible clamp torque and secure insert retention for longer service intervals and safer running at elevated cutting speeds. Precision mounting and compatibility with common toolholders The head accepts a 22 mm shank (shank diameter 22 mm), enabling integration into compact toolpacks and modern modular holders. Compatibility with SEET 12T3 inserts simplifies stockkeeping and tool change routines, while the overall compact length (L40 mm) supports close-tolerance operations where overhang must be minimised. The design supports routine set-up workflows on CNC milling machines and machining centres. Practical handling and maintenance for workshop efficiency At a weight of 0.505 kg, the component is easy to handle during tool assembly and reconditioning. The tool geometry and accessible fasteners facilitate quick insert changes and straightforward cleaning of coolant passages. Clear torque practice for the specified Torx screws and routine inspection of the coolant port ensure repeatable clamping and reduced unscheduled downtime. Application focus and production benefits This head is suited to facing, light shoulder milling and finishing passes where compact tooling and good surface integrity are priorities. Use with appropriate insert grades optimised for the workpiece material to achieve best results; the head’s features support higher feed rates and longer unmanned cycles, making it a practical choice for industrial and precision jobbing environments. For reliable milling performance and assured supply, request the Teknik Makina face milling head T562-1TM through Metav Werkzeuge — our consultants are available to advise on insert grades and holder compatibility and to ensure rapid delivery from Emmerich. Technical data SKU: T562-1TM Product type: Face milling head Brand: Teknik Makina ECLASS: 21181015 Facts Diameter: 63 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.505 kg Cutting edges: 5 Cutting angle: 45° Special features Compatible inserts: SEET 12T3 Internal coolant: yes Torx key: T15 Torx screws: M3.5x11 Aufnahme (mount) dimension: 22 mm FAQ Which inserts fit this milling head? The face milling head accepts SEET 12T3 indexable inserts; select the appropriate insert grade for the workpiece material and the desired surface finish. Is internal coolant supported through the body? Yes, internal coolant is integrated and supplies fluid directly to the cutting zone to improve tool life and chip evacuation. What fasteners and key are required for insert clamping? Insert clamping uses M3.5x11 Torx screws tightened with a T15 Torx key for secure and reproducible fixing. What shank size is required for mounting? The head is designed for a 22 mm shank interface, allowing installation in compatible modular holders and compact toolpacks. Is the tool suitable for finishing passes? With its 45° cutting angle and five-edge arrangement, the head is well suited to finishing and light shoulder milling where stability and surface quality are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust 63 mm facing head with internal coolant and a 45° cutting angle for precise, efficient facing operations; order directly via Metav Werkzeuge or consult our specialists for integration into existing setups. Planmesserkopf T435-1TM — 63 mm facing head with internal coolant for SEET 12T3 by Teknik Makina A Planmesserkopf designed for high-efficiency facing in metalworking, compatible with SEET 12T3 indexable inserts and engineered for stable chip control during finishing and semi-finishing operations 63 mm diameter facing head Compatible with SEET 12T3 indexable inserts Internal coolant for improved chip evacuation 45° cutting angle for smooth facing Increase throughput with a compact, coolant-fed facing head The compact 63 mm diameter and 50 mm overall length give a favourable balance between accessibility and rigidity, making this tool ideal for confined setups where stability matters. Fitted for SEET 12T3 indexable inserts, the head supports rapid insert indexing to maintain cycle times and reduce tool-change downtime. The integrated internal coolant directs fluid right to the cutting edge, lowering temperatures and helping to evacuate chips more effectively — a direct contributor to longer insert life and consistent surface quality. These features combine to raise productivity on facing operations while keeping process variability low. Quick, secure insert changes and reliable clamping Tool changing and maintenance are simplified by the standardised fastening system: the head uses M3,5x8,5 Torx screws driven with a T15 key for repeatable clamping torque and minimal setup time. The configuration with five cutting edges permits stable engagement across the workpiece, and the 45° cutting geometry moderates cutting forces to reduce vibration. For shops consolidating tools, this translates into predictable cycle performance and fewer in-process interruptions, enabling better planning for batch production and mixed-material runs. Consistent surface finish and durable performance under load Designed for facing, the 45° rake provides a controlled shearing action that produces a fine surface finish while distributing cutting forces across the insert. The facing head’s mass (0.815 kg) contributes to damping at the tool tip, which supports dimensional stability when machining broader faces. With coolant delivered internally, thermal growth is minimised and cutting-edge temperatures are better managed, improving repeatability and safeguarding component tolerances. The head’s configuration therefore supports both finish-class and productivity-driven workflows. For reliable facing performance from the Teknik Makina range, contact Metav Werkzeuge for tailored advice on integrating the T435-1TM into existing machines and workholding — Metav Werkzeuge is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: T435-1TM Product type: Planmesserkopf Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 50 mm Weight: 0.815 kg Number of cutting edges: 5 Cutting angle: 45° Torx key: T15 Torx screw: M3,5x8,5 Internal coolant: yes Special features For SEET 12T3 indexable inserts Facing head configuration Label: 63mm Planmesserkopf SEET 12T3 L50mm FAQ Which inserts fit this facing head? The facing head is designed for SEET 12T3 indexable inserts; using the correct SEET 12T3 grade ensures compatibility with the insert pocket geometry and clamping. Does the tool support internal coolant supply? Yes, the head features internal coolant, which supplies cutting fluid directly to the insert interface to improve chip control and tool life. What driving tools and screws are required for insert changes? Insert clamping uses M3,5x8,5 Torx screws tightened with a T15 key for secure and repeatable fixation. Is this head suitable for finishing and semi-finishing? The 45° cutting angle and stable design make the head well suited to both finishing and semi-finishing facing operations, delivering consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable 22 mm shank and 45° cutting geometry that deliver controlled chip flow and repeatable surface finish; the compact 63 mm head diameter minimises vibration for steady cutting. Order the planing cutter head directly via Metav Werkzeuge or consult technical advisers for system integration. Planing cutter head T562TM — indexable cutter head for SEET 12T3 inserts, 45° cutting angle (Teknik Makina) A robust planing cutter head T562TM designed for face machining with SEET R245 12T3 indexable inserts, offering secure mounting and efficient chip evacuation in repetitive production tasks 45° cutting angle for controlled chip flow 22 mm shank for secure toolholder fit Compatible with SEET R245 12T3 inserts Suitable for Sandvik, XTC and ZCC inserts Consistent surface quality through controlled geometry The combination of a 45° cutting angle and a compact head diameter ensures a lower radial cutting force and improved chip control, which translates into a more consistent surface finish and reduced vibration during face machining. With a 22 mm shank the tool achieves secure retention in standard toolholders, improving repeatability across multiple setups. For production planners this means less rework and a predictable cycle time per component, while workshop technicians benefit from stable cutting conditions that make tool offsets easier to tune. Quick change assembly and broad insert compatibility Designed for use with SEET R245 12T3 indexable inserts, this cutter head accepts inserts from major manufacturers such as Sandvik, XTC and ZCC, simplifying procurement and stock management. Fixing is achieved using standard fasteners (M3.5x11 Torx and M5x7 Allen screws) and a T15 Torx key, so replacement of inserts is straightforward and can be carried out without specialised tooling. The familiar hardware and the U‑plate TA052 reduce downtime during service intervals and ensure repeatable clamping force for each insert change. Predictable tool life and production reliability With five effective cutting edges and a compact overall length of 40 mm, the head balances material removal and rigidity to extend consistent tool life under stable cutting conditions. The modest mass (0.505 kg) helps avoid unnecessary spindle load while remaining rigid enough for standard face-turning or planing operations. By keeping mechanical variables such as shank diameter and head geometry constant, process engineers can forecast tooling costs and machining windows more accurately, improving overall throughput and cost-efficiency. Practical integration into workshop workflows The modular design supports straightforward replacement of inserts and routine maintenance without altering the machine setup. Where documentation or fixture checks are required, record the component as a 22 mm shank tool with a 63 mm head diameter and a 45° cutting geometry to ensure correct tool library entries. If toolholders or adapters are being standardised across a fleet of machines, the consistent dimensions and industry-standard fasteners make this head a pragmatic choice for consolidating tool inventories. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina planing cutter head T562TM into existing toolholder systems and for procurement support Technical Data Article number: T562TM Manufacturer: Teknik Makina Product name: Planing cutter head Description: for SEET 12T3 Indexable Inserts Facts Shank diameter: 22 mm Head diameter: 63 mm Cutting angle: 45° Cutting edges: 5 Total length: 40 mm Weight: 0.505 kg Special features Compatible inserts: SEET R245 12T3 Compatible manufacturers: Sandvik Compatible manufacturers: XTC Compatible manufacturers: ZCC Torx screw: M3.5x11 Allen screw: M5x7 Torx key: T15 U‑plate: TA052 FAQ Which indexable inserts fit this cutter head? The planing cutter head accepts SEET R245 12T3 indexable inserts, the specified geometry for correct seating and chip formation. Are inserts from major brands compatible? Yes. Inserts from Sandvik, XTC and ZCC are compatible with the Teknik Makina T562TM head, facilitating flexible sourcing. What are the tool's key mounting dimensions? Mounting is defined by a 22 mm shank and a 63 mm head diameter; the overall length is 40 mm for tool library setup. Which fasteners are used for insert clamping? Insert clamping uses an M3.5x11 Torx screw and an M5x7 Allen screw, with a T15 Torx key specified for maintenance operations. How does the 45° cutting angle benefit machining? The 45° cutting angle reduces radial cutting forces and improves chip evacuation, resulting in steadier cuts and better surface finish for face machining. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise chip control, a compact 63 mm cutter body and robust six‑edge tooling to increase throughput and reduce set‑up time; order directly via Metav Werkzeuge or request tailored application advice from our specialists. Planmesserkopf T165-1TM – 63 mm face milling head with internal coolant (Teknik Makina) The Planmesserkopf T165-1TM is a face milling head for SNEU 1206 indexable inserts, engineered for reliable finishing and medium‑to‑heavy face milling in conventional and CNC machining environments. Face milling head for SNEU 1206 inserts 63 mm cutting body diameter Internal coolant for improved chip evacuation Six cutting edges, 45° cutting angle Increase productivity through controlled chip evacuation and higher feeds Equipped with internal coolant and a compact 63 mm body, this head supports stable thermal conditions at the cutting zone, which enables higher sustained feed rates without compromising tool life. The built‑in coolant channel improves chip evacuation, reducing rework and machine idle time. For production shops requiring predictable cycle times, the combination of coolant‑assisted cutting and a multi‑edge design delivers measurable increases in throughput while maintaining consistent tool performance. Achieve consistent surface quality and dimensional accuracy The geometry with a 45° cutting angle and maximum cutting diameter of 76 mm promotes smooth engagement and a uniform surface finish on workpieces. Accepting SNEU 1206 indexable inserts and matching Walter insert standards ensures repeatable cutting edges and quick index changes, which stabilises tolerances across batches. The arrangement of six edges distributes cutting forces evenly, improving stability and reducing vibration for better dimensional control on flat surfaces. Robust fastening and quick insert changes for minimal downtime Fast, secure assembly is supported by Torx T20 drive screws and M5x12 fasteners, enabling quick insert replacement and reliable clamping torque that minimises the risk of loosening under load. The head’s modest mass (0.582 kg) and compact 40 mm overall length simplify handling during set‑up and tool change procedures, shortening fixture times and lowering the risk of handling damage in busy workshops. Designed for workshop integration and flexible routing This face milling head integrates easily into existing toolholders and fixtures thanks to its standard interface dimensions and compatibility with commonly used insert systems. Supplied by Teknik Makina, the unit is suitable for both retrofit installations and new machine tool lines where compact, coolant‑fed tooling is required. The product’s straightforward interface supports harmonised tool inventories and reduces the need for special holders. Practical benefits for procurement and maintenance planning Choosing this solution supports predictable maintenance cycles: standard Torx fittings and widely available SNEU 1206 inserts simplify spare‑part logistics, while the internal coolant channel reduces heat‑related wear. The head’s design promotes cost‑effective production by lowering scrap rates and extending the usable life of indexable inserts, making it a pragmatic option for production managers focused on uptime and consistent output. For application advice or to place an order for the Teknik Makina face milling head (SKU T165-1TM), contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support and delivery details Technical data Article number: T165-1TM Manufacturer: Teknik Makina Label: 63mm Planmesserkopf SNEU 1206 L40mm mit Innenkühlung ECLASS: 21181015 Dimensions & performance Diameter: 63 mm Max cutting diameter: 76 mm Total length: 40 mm Weight: 0.582 kg Cutting edges: 6 Cutting angle: 45° Features & compatibility Internal coolant: yes Compatible inserts: SNEU 1206 Suitable insert brand: Walter Torx key: T20 Torx screw: M5x12 SKU / UID: T165-1TM FAQ Which inserts are compatible with this face milling head? The head accepts SNEU 1206 indexable inserts; it is compatible with inserts from Walter that conform to that specification, ensuring correct fit and performance. Is this head suitable for high‑feed finishing passes? With internal coolant, a six‑edge layout and a 45° cutting geometry, the head supports higher feed rates and improved finishing stability under controlled conditions. How are the inserts secured and removed? Inserts are fastened using Torx T20 drive screws (M5x12), allowing reliable clamping torque and straightforward replacement with standard workshop tools. Can this tool be retrofitted to existing tool holders? The compact design and standard interface dimensions facilitate retrofit into many common toolholders; reference SKU T165-1TM when verifying holder compatibility. What advantages does the coolant channel provide during operation? The integrated coolant channel directs coolant to the cutting zone, enhancing chip evacuation, reducing thermal load and promoting longer insert life for consistent batch quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining a compact 63 mm diameter with internal coolant and a six cutting edges arrangement, the milling head delivers stable face milling with reduced overhang and consistent surface quality. Order the T322-1TM face milling head directly via Metav Werkzeuge or consult Metav’s technical advisers for application-specific guidance. Face milling head T322-1TM — 63 mm diameter, internal coolant by Teknik Makina The face milling head T322-1TM is a compact, internally cooled milling head designed for face milling with SNKX 1206 indexable inserts, optimised for applications requiring short overhangs and high process stability. Compact 63 mm milling head with internal coolant Compatible with SNKX 1206 indexable inserts Six cutting edges for stable face milling Short 44 mm overall length for reduced overhang Precision and process stability for productive face milling The compact design focuses on repeatable results: a 63 mm cutter body paired with six cutting edges provides a balance between material removal and vibration damping, improving finish quality during face milling operations. The 45° cutting angle reduces cutting forces perpendicular to the spindle axis, which stabilises the machining process and lowers the risk of chatter. With a rated maximum cutting diameter of 76 mm, the head is suitable for a wide range of face-milling passes while maintaining consistent dimensional control and tool life. Integrated cooling and insert compatibility that extend tool life Built-in internal coolant channels direct cutting fluid to the insert pockets and cutting zone, aiding chip evacuation and reducing thermal loading at the edge. This feature enhances insert performance and longevity when used with SNKX 1206 indexable inserts (compatible with Korloy), allowing stable cutting temperatures and cleaner chips. The result is fewer insert changes and longer uninterrupted cycles, supporting higher overall equipment effectiveness in production environments. Fast, secure mounting and compact overhang for reliable setups The head’s short 44 mm overall length reduces lever effects at the spindle, improving rigidity for demanding cycles. Fast, positive clamping is achieved with M4 x 12.5 Torx screws tightened using a T15 key, ensuring secure seat retention and repeatable assembly. The tool’s mass (approx. 0.71 kg) and compact footprint contribute to lower spindle load and easier handling during tool changes, which is useful in high-mix or low-run scenarios where quick set-up and consistent mounting are essential. For reliable face milling with integrated coolant, contact Metav Werkzeuge for the T322-1TM by Teknik Makina — Metav’s advisers can assist with application matching and technical data at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T322-1TM Manufacturer: Teknik Makina Product type: Face milling head Compatible inserts: SNKX 1206 (Korloy) Internal coolant: Yes Core measurements Diameter: 63 mm Maximum cutting diameter: 76 mm Overall length: 44 mm Number of cutting edges: 6 Cutting angle: 45° Weight: 0.71 kg Screw size: M4 x 12.5 Torx key: T15 Special features Internal coolant Short overhang design Compatibility with Korloy SNKX 1206 inserts Robust clamping with Torx M4 screws FAQ Is this head compatible with SNKX 1206 indexable inserts? Yes. The T322-1TM face milling head is specifically designed for use with SNKX 1206 indexable inserts and fits Korloy-manufactured versions. Does the tool feature internal coolant? Yes. The milling head includes internal coolant channels that direct cutting fluid to the cutting zone to aid chip evacuation and reduce tool edge temperature. What is the maximum cutting diameter for this face milling head? The tool supports a maximum cutting diameter of 76 mm, enabling a variety of face milling passes while keeping a compact cutter body. Which fasteners and key are required for mounting? Mounting uses M4 x 12.5 Torx screws tightened with a T15 key for secure and repeatable clamping. Is the head suitable for applications with limited overhang? Yes. The 44 mm overall length and compact mass improve rigidity and are beneficial where short overhangs and high stability are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 63 mm cutting diameter, internal coolant and compatibility with SNMU 1305 indexable inserts for consistent facing performance and reduced tool change times; order the T235-1TM directly via Metav Werkzeuge or consult the specialists for integration advice. Face milling head T235-1TM – 63 mm diameter, internal coolant, Teknik Makina Face milling head T235-1TM designed for SNMU 1305 indexable inserts, engineered for efficient facing operations and reliable coolant delivery to the cutting edge 63 mm cutting diameter Internal coolant supply Compatible with SNMU 1305 inserts (ISCAR) Six cutting edges, 45° cutting angle High-performance facing for predictable cycle times This milling tool is engineered to deliver consistent metal removal rates by combining a 63 mm nominal diameter with a 45° cutting angle and a robust body. The geometry supports stable chip formation and smoother surface finishes, while the six cutting edges reduce the frequency of insert changes and increase productive cutting time. The result is measurable efficiency gains on medium‑duty facing operations and a predictable output for batch production. Reliable coolant feed for extended insert life Built with internal coolant, the cutter head channels cutting fluid directly to the insert rake face, improving chip evacuation and thermal control. This targeted cooling reduces flank and crater wear on the indexable inserts, particularly when using SNMU 1305 grades from ISCAR, and contributes to longer insert life and fewer unplanned stops. The integrated coolant routing is especially beneficial where tight tolerances and consistent surface quality are required. Practical design for quick maintenance and secure assembly The tool accepts standard M5x12 Torx screws (Torx T20), enabling secure, repeatable clamping and rapid insert replacement with commonly available tools. The compact L 44 mm overall length and a mass of approximately 0.645 kg make handling straightforward during set-up and changeover. Practical features such as standard fasteners and a familiar insert seat simplify workshop routines and reduce the learning curve for fitters and operators. Engineered compatibility and application clarity Compatible with SNMU 1305 indexable inserts, the cutter head is suited to facing and light shoulder milling where a 63 mm cutter is appropriate. The maximum recommended cutting diameter of 76 mm allows for flexible application planning. Technical data such as the 45° approach angle and the six-edged configuration should be considered when programming feed and speed to achieve optimal tool life and surface finish; consult material-specific recommendations for best results. For specification checks, availability and advice on integrating the T235-1TM face milling head into production, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical discussion. Technical data SKU: T235-1TM eClass: 21181015 Label: 63mm Planmesserkopf SNMU 1305 L44mm mit Innenkühlung Facts Diameter: 63 mm Overall length: 44 mm Weight: 0.645 kg Max cutting diameter: 76 mm Cutting angle: 45° Number of cutting edges: 6 Special features Internal coolant Compatible with SNMU 1305 indexable inserts Compatible insert manufacturer: ISCAR Torx screw: M5x12 Torx key: T20 Product type: Face milling head Manufacturer: Teknik Makina FAQ Which inserts fit this face milling head? The face milling head accepts SNMU 1305 indexable inserts; it is compatible with inserts from ISCAR and other manufacturers offering the same insert designation. Is internal coolant supplied to the cutting edge? Yes, the T235-1TM is equipped with internal coolant routing to deliver coolant directly to the insert cutting zone, improving cooling and chip control. What is the recommended cutting angle and how does it affect performance? The tool features a 45° cutting angle, which balances shear and radial forces to provide good surface finish and stable cutting on facing operations. How many cutting edges are available per tool body? The cutter head is configured for six cutting edges, permitting multiple indexings before a full insert change is required. Which fasteners are required for insert clamping? Insert clamping uses M5x12 Torx screws and a Torx T20 key for secure and repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise facing geometry, built‑in coolant delivery and broad insert compatibility to maintain high throughput and consistent surface quality. Order the suitable Teknik Makina face mill head directly via Metav Werkzeuge or request an application consultation from our specialists. Teknik Makina T635TM 63 mm face mill head with internal coolant A face mill head designed for high‑precision facing with SOET 13 indexable inserts, ideal for production machining and finishing. 63 mm diameter for efficient facing Internal coolant for improved tool life Compatible with SOET 13 indexable inserts Robust design with five cutting edges Precision and productivity for facing operations The face mill head has been engineered to deliver predictable material removal and repeatable results. Its 63 mm diameter and 90° cutting angle provide a flat, true surface with each pass, reducing downstream finishing. The combination of a compact overall length and five cutting edges enables steady chip load distribution, which translates into stable cutting forces and improved cycle times. For batch production or single‑piece finishing, this geometry supports a measurable uplift in productivity and workpiece consistency. Stable cooling and straightforward maintenance Built‑in internal coolant channels direct cutting fluid to the insert pockets, which reduces thermal load on the cutting edges and helps maintain edge geometry for longer. This internal feed system also cuts the risk of built‑up edge and improves tool life under continuous operation, meaning fewer stoppages for insert changes. Maintenance is simplified by standard fastenings: Torx T15 engagement and M3.5x8.5 screws allow rapid removal and secure clamping without specialised adapters, keeping downtime to a minimum. Wide insert compatibility for flexible setups Compatibility with SOET 13 indexable inserts—and suitability for inserts from Palbit—gives machine shops flexibility when specifying grades for steel, alloy or cast components. The cutter head accepts industry‑standard indexable inserts, permitting quick tool reconditioning and easy selection of coatings or geometries tailored to specific materials or finishes. This adaptability reduces tool inventory complexity while preserving the option to choose high‑performance grades when required. Confident finishes and reliable repeatability A straightforward clamping concept combined with optimised insert seating ensures consistent runout control and repeatable surface quality. The head’s balanced design and controlled chip flow help to avoid chatter and produce cleaner surfaces, particularly on contoured or large planar faces. For applications where finish and dimensional adherence matter, the T635TM supports reliable outcomes that ease downstream processing and inspection. For tailored machining advice or to specify the Teknik Makina T635TM face mill head with internal coolant for an upcoming job, contact Metav Werkzeuge for quick application support and parts supply. Technical data SKU: T635TM Product type: face mill head Brand: Teknik Makina Dimensions & core data Diameter: 63 mm Overall length: 50 mm Weight: 1.254 kg Cutting edges: 5 Cutting angle: 90° Materials & special features Internal coolant: yes Compatible inserts: SOET 13 indexable inserts Compatible insert manufacturer: Palbit Torx key: T15 Torx screw: M3.5x8.5 FAQ Which insert type does this cutter accept? The T635TM is designed for SOET 13 indexable inserts, and it is compatible with inserts from Palbit for flexible grade selection. Is there internal coolant provision for improved tool life? Yes, the face mill head features internal coolant delivery to the insert pockets to reduce thermal stress and extend cutting edge life. What is the diameter and typical application area? With a 63 mm diameter, the cutter is suited to efficient facing and planar finishing in general machining and production environments. How many cutting edges are mounted and what is the cutting angle? The head is equipped with five cutting edges and provides a 90° cutting angle for true facing and reliable surface quality. What fastening tools are required for insert changes? Insert clamping and screw removal use a Torx T15 key and M3.5x8.5 Torx screws for easy servicing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact solution that combines 63 mm diameter machining, internal coolant and a five-edge configuration for consistent face finishes; order the face milling head directly via Metav Werkzeuge or consult our specialists for integration advice. Face milling head T210-1TM — 63 mm diameter, internal coolant, Teknik Makina The Face milling head T210-1TM is a compact, indexable-cutter solution designed for precision face milling on milling machines and machining centres. 63 mm diameter for compact machining Internal coolant for reliable chip evacuation 5 cutting edges for balanced material removal High-efficiency cutting with compact geometry The compact design provides a 63 mm diameter and an overall length of 40 mm, enabling stable cutting close to the spindle and reducing overhang-related deflection. With a configuration of five cutting edges, the tool ensures a steady material removal rate and improved surface integrity, while the 43° cutting angle promotes smooth chip flow and lower cutting forces. These characteristics translate into shorter cycle times and consistent results on small to medium-sized face operations. Controlled cooling and predictable chip management An integrated internal coolant channel supplies lubricant directly to the cutting zone, improving tool life and temperature control during sustained face milling cycles. This internal delivery supports effective chip evacuation and reduces the risk of built-up edge formation, which helps maintain dimensional accuracy over longer runs. The result is a more reliable finishing process and reduced need for unscheduled tool changes. Easy maintenance and secure clamping Fast and repeatable insert changes are supported by a Torx fastening system: Torx T20 for the key interface and M5x12 Torx screws for secure clamping. The specification enables straightforward maintenance with commonly available tooling, reducing downtime during scheduled insert replacement. The short overall length and robust fastening scheme also contribute to low vibration at the cutting edge, improving surface finish without complex setups. Built for a professional workshop environment Delivered as a purpose-built face milling solution from Teknik Makina, the head suits operations that require compact footprint tooling and consistent face finishes. The combination of balanced geometry, internal coolant and a multi-edge layout supports reliable series production and precise finishing passes. For purchasers seeking a dependable milling head and a single-source supply chain, Metav provides the distribution and technical backing to integrate this cutter head into workshop tooling assortments. Contact Metav Werkzeuge for tailored integration support and secure the Teknik Makina face milling head T210-1TM with internal coolant for precision finishing; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T210-1TM Eclass: 21181015 Label: 63mm Planmesserkopf L40mm Manufacturer: Teknik Makina Dimensions & core data Diameter: 63 mm Overall length: 40 mm Cutting edges: 5 Cutting angle: 43° Features Internal coolant: Yes Torx key: T20 Torx screw: M5x12 Product type: Face milling head UID: T210-1TM FAQ What is the primary application of this milling head? The face milling head is intended for precision face milling operations on milling machines and machining centres, providing stable finishes with short overhangs. How does the internal coolant affect performance? Internal coolant delivers lubricant directly to the cutting zone, improving temperature control and chip evacuation for more consistent tool life and surface quality. Which fastening hardware is specified for insert clamping? Insert clamping uses Torx screws specified as M5x12 with a Torx key size of T20, as listed for the T210-1TM. Does the head support balanced cutting for finishing passes? Yes, the five cutting-edge arrangement and 43° cutting angle promote balanced material removal and improved surface finish during finishing passes. Who supplies and supports this tool in Europe? The T210-1TM is supplied via Metav Werkzeuge, which provides product distribution and technical support for workshop integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient machining with a 63 mm diameter and internal coolant delivers stable metal removal and extended tool life; the compact 40 mm overall length and six indexable cutting edges reduce downtime and simplify insert changes. Purchase the face milling head directly via Metav Werkzeuge or contact our consultants for application advice. Face milling head T344-1TM — 63 mm, internal coolant (Teknik Makina) A face milling head designed for heavy-duty facing and finishing using SNMX 1206 indexable inserts, optimised for stable cuts and quick insert changes. 63 mm diameter for broad surface contact Internal coolant for edge cooling and chip control Six indexable cutting edges for longer uptime Compatible with Korloy SNMX 1206 inserts Consistent material removal and increased throughput The compact cutter body delivers a wide contact radius while maintaining a short overhang; the 63 mm diameter in combination with the 88° cutting geometry produces a flat, uniform surface in a single pass. By using six indexable edges, the design reduces the frequency of tool changes and raises effective cutting time per setup, which improves production throughput. The SNMX 1206 insert system is a common industrial standard and, when paired with the milling head, enables consistent chip formation and predictable tool wear—key factors for process stability and reproducible results. Cooling at the cutting edge for longer tool life Built-in internal coolant supplies lubricant and coolant directly to the cutting zone, lowering temperatures at the edge and improving chip evacuation. Cooling at point of contact reduces thermal softening and flank wear, which in turn extends insert life and lowers overall tooling costs. For operations that demand sustained feeds and reliable surface finish, this coolant-through design helps maintain cutting performance and reduces the risk of built-up edge, making the cutter a sensible choice for continuous production environments. Fast serviceability and secure clamping for minimal downtime The milling head uses M4x12.5 Torx screws and a T15 key for secure and repeatable clamping, ensuring quick insert indexing and consistent seating after each change. The modest 40 mm overall length and a mass of 0.574 kg contribute to good balance and reduced vibration, supporting stable cuts at common spindle speeds. Simple mechanical interfaces and widely available Torx hardware mean maintenance is straightforward in any well-equipped workshop, helping to keep machine uptime high and servicing intervals short. Practical compatibility and workshop integration Designed specifically for SNMX 1206 indexable inserts from Korloy, the head fits into existing tool programmes and inventory systems with minimal conversion effort. The SKU T344-1TM identifies the exact configuration for ordering and spare-part management. With a familiar insert format and conventional screw fixation, integration into production lines is straightforward: operators benefit from predictable tool performance, and purchasers benefit from easy stock management and replacement sourcing. For application-specific advice or rapid supply of the Teknik Makina face milling head, contact Metav Werkzeuge for guidance and ordering support — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T344-1TM Manufacturer: Teknik Makina Product: Face milling head (Planmesserkopf) Compatible inserts: SNMX 1206 Compatible insert manufacturer: Korloy Internal coolant: yes SKU / UID: T344-1TM eClass: 21181015 Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.574 kg Number of cutting edges: 6 Cutting angle: 88° Special features Internal coolant feed Torx screw fixation M4x12.5 Torx key T15 Designed for SNMX 1206 indexable inserts Compact design for reduced overhang FAQ Which insert type fits this milling head? The face milling head accepts SNMX 1206 indexable inserts; Korloy-manufactured SNMX 1206 inserts are specified for optimal fit and performance with the T344-1TM. Is the tool coolant-through or external only? This cutter features internal coolant, delivering coolant directly to the cutting zone to support edge life and chip control. How many indexable edges are available per tool set? The head holds six indexable cutting edges, which increases uptime by allowing multiple indexed positions before a full insert replacement is required. What fastening hardware is required for insert mounting? Inserts are secured with M4x12.5 Torx screws using a T15 key, allowing secure and repeatable clamping during maintenance. What are the key dimensions for setup and balancing? Key dimensions: 63 mm diameter and 40 mm overall length; the weight is 0.574 kg, relevant for toolholder balancing and overhang calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient 45° cutting performance, a compact 22 mm shank and compatibility with ISCAR ONMU 0505 indexable inserts combine to make fast set-up and consistent face-milling results achievable on the shop floor; order the T794TM through Metav Werkzeuge or consult the specialists if further application details are required. Planing cutter head T794TM — 45° face-milling head for ONMU 0505 inserts by Teknik Makina the Planing cutter head T794TM is a compact 45° face-milling head designed for use with ONMU 0505 indexable inserts in industrial metalworking operations 45° cutting angle for smooth face milling Compatible with ISCAR ONMU 0505 indexable inserts 63 mm diameter with 6 cutting edges 22 mm tool shank, secured with M5x12 Torx screw Faster, more stable cutting through 45° geometry The oblique 45° cutting geometry reduces cutting forces and spreads engagement across multiple teeth, which promotes stable machining and calmer spindle behaviour. With 6 cutting edges distributed on a Ø 63 mm head, the tool supports continuous chip formation suited to face-milling applications. This geometry is particularly effective where even material removal and repeatable surface results are required, making the tool a rational choice for production environments that prioritise throughput and process reliability. Secure mounting and rapid insert changes for higher uptime Designed for ONMU 0505 indexable inserts, the head accepts standard insert formats and is retained with a M5x12 Torx screw, driven with a T20 key, enabling quick and repeatable insert changes. The 22 mm shank ensures a compact, rigid connection to the toolholder, reducing micro‑movement at the cutting edge and enhancing positional accuracy. These features shorten changeover times and simplify maintenance procedures without sacrificing milling stability. Compact dimensions that aid handling and balance At an overall length of 45 mm and a mass of 0.652 kg, the component is compact enough for tight setups while providing sufficient mass to contribute to cutting stability. The reduced overhang and balanced form factor help to limit vibration during operation, which supports consistent surface quality and predictable tool performance. Such dimensional characteristics assist in achieving reliable cycle times in routines where space and tool clearance are limited. Application fit and workshop integration Specifically aligned with industrial indexable-insert systems, the head is suitable for standard face-milling tasks where ONMU 0505 inserts are employed. Compatibility with ISCAR inserts simplifies procurement and inventory management for workshops already standardising on that insert family. The design emphasises practical workshop needs — easy insert retention, standard Torx fixing and a familiar shank size — facilitating integration into existing toolsets and fixtures while keeping process steps straightforward. For tailored advice on integrating the Teknik Makina T794TM into existing setups or for reliable supply from Metav Werkzeuge, please contact our advisors at Metav Werkzeuge in Emmerich; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: T794TM Product: Planing cutter head for ONMU 0505 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 63 mm Cutting angle: 45° Cutting edges: 6 Shank diameter: 22 mm Overall length: 45 mm Weight: 0.652 kg Special features Compatible inserts: ISCAR ONMU 0505 Torx screw: M5x12 Torx key size: T20 Brand: Teknik Makina FAQ Which insert type fits this cutter head? The cutter head is specified for ONMU 0505 indexable inserts and is compatible with ISCAR insert geometries of that designation. How is the insert secured in the head? The T794TM accepts inserts secured by a M5x12 Torx screw; a T20 Torx key is used for tightening and loosening. What is the shank diameter for mounting? The tool features a 22 mm shank diameter intended for conventional toolholder interfaces. What are the key dimensions to consider for machine setup? Relevant dimensions include a 63 mm head diameter, 45 mm overall length and a mass of 0.652 kg, which inform clearance and balance considerations. Which manufacturer produces this cutting head? The tool is manufactured by Teknik Makina and distributed under SKU T794TM for industrial face-milling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of 45° cutting geometry and compatibility with ONMX 0606 indexable inserts for efficient face milling and predictable surface quality; order the face milling head directly via Metav Werkzeuge or consult our specialists for fitment advice. Face milling head T790TM — 45° face milling head for ONMX 0606 indexable inserts (Teknik Makina) Face milling head T790TM designed for precision face milling applications with ONMX 0606 indexable inserts, optimised for stable cutting at a 45° approach angle. 45° cutting angle for smooth milling 63 mm diameter for broad coverage Compatible with Korloy ONMX 0606 inserts Increase machining efficiency with 45° cutting geometry The 45° approach of this face milling head delivers a balance between chip thinning and surface finish, reducing cutting forces while maintaining material removal rates. With a 63 mm diameter and 5 cutting edges, the tool head spreads load across the insert set and helps to achieve a more consistent finish in fewer passes. For production environments, this geometry often translates into improved cycle times and less tool pressure on the spindle, supporting efficient, repeatable face milling operations. Secure clamping and straightforward insert handling for less downtime Designed with secure fastening in mind, the head uses an M5x12 Torx screw and requires a T20 key for insert clamping. The compact 22 mm shank ensures a precise fit in many conventional tool holders, while the measured mass of 0.657 kg contributes to predictable dynamic behaviour during cutting. These tangible mechanical details reduce guesswork at setup, simplify changeovers and help to maintain stable performance across batches. Designed for compatibility and workshop reliability This face milling head is specified for ONMX 0606 indexable inserts and listed as compatible with Korloy inserts, making it straightforward to source replacement cutting edges from common providers. The straightforward interface between holder and insert supports consistent seating and repeatable geometry, which benefits both workshop maintenance and in-house production planning. Combined with Metav’s role as a precision partner, customers gain access to a wide supply range and industrial expertise for reliable procurement. For tailored procurement and technical guidance on the Teknik Cutting Tools face milling head T790TM — including application matching and availability from Metav Werkzeuge in Emmerich — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T790TM SKU: T790TM Manufacturer: Teknik Cutting Tools / Teknik Makina Suitable for indexable inserts: ONMX 0606 (Korloy) Torx screw: M5x12 Torx key size: T20 Facts Diameter: 63 mm Cutting angle: 45° Cutting edges: 5 Overall length: 45 mm Shank diameter: 22 mm Weight: 0.657 kg Special features Compatibility with Korloy ONMX 0606 indexable inserts Secure clamping via M5x12 Torx screw Compact 22 mm shank for standard tool holders Five cutting edges for distributed cutting load FAQ Which indexable inserts fit this face milling head? The face milling head accepts ONMX 0606 indexable inserts and is listed as compatible with Korloy inserts. What is the cutting angle and how does it affect performance? The head uses a 45° cutting angle, which reduces cutting forces while supporting a fine, consistent surface finish for face milling operations. Which screw and key are required for insert clamping? Insert clamping is done with an M5x12 Torx screw; a T20 Torx key is required for tightening and removal. What are the main mounting and dimension details? Key dimensions include a 63 mm outer diameter, 45 mm overall length and a 22 mm shank for mounting; the assembly weighs 0.657 kg. Is machining suitability for specific materials specified? Material suitability is not specified in the provided product data; compatibility should be confirmed based on the chosen insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of compact design, secure insert clamping and internal coolant to keep surfacing cycles efficient and reliable. Order the face milling head directly via Metav Werkzeuge or consult our advisors for specification support. Planmesserkopf T677TM — 63 mm face milling head with internal coolant by Teknik Makina The Planmesserkopf for PNHX 1105 indexable inserts is a compact face milling head engineered for efficient surface machining and quick insert changes in production environments. 63 mm dia. for compact face milling Internal coolant for improved chip evacuation Holds 6 PNHX 1105 indexable inserts Torx T15 screws M4x10 for secure clamping High-efficiency surfacing with compact dimensions The face milling head delivers consistent material removal thanks to its 63 mm nominal diameter and a maximum cutting diameter of 72 mm, optimised for short overhangs and stable cutting conditions. The body accepts 6 cutting edges, enabling multiple index changes without removing the cutter body from the spindle. The 60° cutting angle reduces cutting forces on interrupted cuts, supporting more consistent feeds and longer insert life. These measurable parameters make the tool particularly suitable where process stability and repeatability are required. Secure clamping and quick maintenance for production Designed for PNHX 1105 indexable inserts, the milling head features robust clamping via Torx T15 drive screws (M4x10) to ensure reliable seating under cyclic loads. The insert layout minimises vibration and simplifies indexing, while the Torx fasteners provide reliable torque transfer for maintenance teams. Insert compatibility with Palbit variants allows selection of grades tailored to the workpiece material; the cutter body itself keeps handling straightforward and reduces downtime during routine insert replacement. Integrated coolant and application versatility The integrated internal coolant supply channels coolant directly to the cutting zone, improving chip evacuation and reducing thermal loads on the insert edge. This feature supports extended tool life and cleaner surface finishes when paired with appropriate insert grades. The compact L40 mm body and modest mass reduce spindle load, which benefits high-speed operations and helps maintain concentricity during heavier cuts. The combination of features supports a wide range of face milling tasks where secure clamping and effective cooling are decisive. For reliable performance and rapid tooling changes, contact Metav Werkzeuge in Emmerich to discuss Teknik Makina face milling heads with internal coolant and the best insert options for the intended application — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930. Product details SKU: T677TM Product type: Face milling head Manufacturer: Teknik Makina Compatible inserts: PNHX 1105 (Palbit) Key dimensions Diameter: 63 mm Max cutting diameter: 72 mm Total length: 40 mm Cutting angle: 60° Number of cutting edges: 6 Weight: 0.418 kg Torx screw: M4x10 Torx key: T15 Special features Internal coolant Compatible with PNHX 1105 indexable inserts Label: 63mm Planmesserkopf PNHX 1105 L40mm with internal coolant eClass: 21181015 FAQ Which inserts fit this milling head? The milling head accepts PNHX 1105 indexable inserts; insert grades from Palbit are compatible and should be selected according to the workpiece material. Is the coolant internal or external-fed? This cutter body features internal coolant, supplying coolant directly to the cutting zone to aid chip control and thermal management. What drive screws and key are required for clamping? Clamping uses M4x10 Torx screws with a T15 Torx key for secure and repeatable fastening. Can this tool be used for heavy stock removal? The compact design and 63 mm diameter are optimised for stable face milling; heavy stock removal may require larger or specialised cutter bodies depending on the application and insert grade. What information is needed to order spare screws or inserts? Provide the SKU T677TM, the insert designation PNHX 1105, and screw specification M4x10 to ensure correct spare parts are supplied. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com