Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact, high-performance milling head that combines internal coolant and compatibility with widely used RPMT 10T3 inserts for consistent chip control and reliable cycle times; order directly via Metav Werkzeuge or consult our specialists for integration advice. Round milling cutter T709-1TM — 80 mm diameter, internal coolant, for RPMT 10T3 indexable inserts (Teknik Makina) Round milling cutter T709-1TM designed as a compact face milling head for high-volume and precision finishing tasks in metalworking and general workshop environments 80 mm diameter for compact machining Internal coolant for improved chip evacuation Compatible with RPMT 10T3 Korloy inserts Seven indexable cutting edges for smooth cuts T15 Torx, M3.5x8.5 clamping screws Greater material removal with consistent results The compact face milling head delivers a focused combination of geometry and coolant management to maintain stable cutting conditions. With an 80 mm diameter and L50 mm overall length, the head supports efficient engagement in confined set-ups while the seven cutting edges provide balanced loading and predictable tool life. The integrated internal coolant reduces heat at the cutting zone and aids chip evacuation, which translates into more consistent surface quality and reduced rework for short- and medium-run production. Faster tooling changes and reduced machine downtime Designed for straightforward assembly and serviceability, the cutter uses RPMT 10T3 indexable inserts from Korloy, simplifying spare-part logistics and minimising changeover complexity. Clamping is secured with T15 Torx key engagement and M3.5x8.5 screws to ensure repeatable seat positioning. The result is quicker insert swaps and less time at the machine for maintenance tasks, contributing to higher productive uptime on the shop floor. Reliable handling, predictable performance and supply Engineered for workshop robustness, the milling head has a clear mass of 1.272 kg, offering stable rotational behaviour and ease of handling during set-up. Supplied as SKU T709-1TM, this tool is manufactured by Teknik Makina and intended for use as a compact face milling solution where space and accessibility are constraints. The head’s construction and internal coolant capability make it suitable for demanding finishing and light roughing operations while contributing to a reproducible process window. Contact Metav Werkzeuge for a tailored consultation on integrating the Teknik Makina T709-1TM into the production line, and request availability or a quotation from Metav Werkzeuge directly via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: T709-1TM Manufacturer: Teknik Makina Product type: Round milling cutter (face milling head) Label: 80mm Rundplattenfräser RPMT 10T3 L50mm with internal coolant Core specifications Diameter: 80 mm Overall length: 50 mm Weight: 1.272 kg Number of cutting edges: 7 Materials & features Internal coolant Compatible with RPMT 10T3 indexable inserts Recommended insert manufacturer: Korloy Torx key: T15 Clamping screws: M3.5x8.5 Category: Face milling head (Planmesserkopf) ECLASS: 21180902 FAQ Which inserts fit this milling head? The 80 mm round milling cutter (T709-1TM) is designed to accept RPMT 10T3 indexable inserts; Korloy inserts of that designation are compatible and widely available. Is the coolant internal or external? This Tek­nik Makina milling head features internal coolant, which directs lubricant to the cutting zone for improved chip control and thermal management. How many cutting edges are active on the tool? The tool is equipped with seven indexable cutting edges, providing a balanced load distribution and steady cutting action. What tool is required for clamping the inserts? Clamping is performed with a T15 Torx key and M3.5x8.5 screws; the specified fasteners ensure secure and repeatable insert seating. What is the SKU and weight of the tool? The SKU is T709-1TM and the tool weight is 1.272 kg, useful information for machine balance and handling considerations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, compatible milling solution that combines straightforward insert interchangeability with robust assembly: the T310TM supports both APKT 1604 and APXT 1003 indexable inserts and features a compact 80 mm diameter with five cutting edges for steady material removal. Order directly via Metav Werkzeuge or request guidance from their consultants for application-specific recommendations. Planing cutter head T310TM — face milling head, 80 mm, compatible with APKT 1604 / APXT 1003 (Teknik Cutting Tools) A Planing cutter head T310TM engineered for face milling applications, optimised to accept APKT 1604 and APXT 1003 indexable inserts for consistent finishing and semi‑roughing in CNC operations. 80 mm diameter for compact face milling Accepts APKT 1604 and APXT 1003 inserts Five cutting edges for balanced engagement Torx fastening M4x10, key T15 Consistent compatibility reduces setup complexity The T310TM is built around standardised indexable inserts to simplify tooling logistics. Compatibility with APKT 1604 and APXT 1003 insert types means common insert inventories can be used across different cutters, reducing changeover time and inventory overhead. The specified acceptance of Korloy inserts ensures that established insert geometries and grades are supported, so the cutter can be integrated into existing machining routines without expensive adapter work. Geometry that stabilises cutting and improves surface quality A compact 80 mm diameter combined with a 75° cutting angle and five cutting edges delivers a balance between chip evacuation and engagement stability. The acute cutting angle reduces cutting forces on thin workpieces and helps maintain tool life, while multiple edges distribute wear for more uniform performance. For operations where surface finish and repeatability matter, this geometry supports reliable results on finishing passes and controlled material removal on semi‑finishing work. Robust fastening and compact mounting for reliable production Mechanical reliability is addressed through standard Torx fastening: M4x10 screws tightened with a T15 key ensure secure insert clamping and straightforward maintenance. A 27 mm interface (shank/holder connection) and a total length of 52 mm make the head suitable for many compact toolholders and turret setups. At 1.12 kg, the assembly is light enough to reduce toolholder load while remaining sufficiently rigid for stable machining. These attributes limit downtime and simplify workshop logistics when inserts are changed or inspected. For application advice or to obtain the T310TM from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 — consultants are available to discuss compatibility and delivery options Technical Data Article number: T310TM Manufacturer: Teknik Cutting Tools Product name: Planing cutter head Facts Diameter: 80 mm Shank / mounting diameter: 27 mm Total length: 52 mm Weight: 1.12 kg Number of cutting edges: 5 Cutting angle: 75° Special features Compatible with APKT 1604 and APXT 1003 indexable inserts Torx screw: M4x10 Torx key size: T15 Compatible insert manufacturer: Korloy Eclass: 21181015 FAQ What insert types fit this cutter head? The T310TM is designed to accept APKT 1604 and APXT 1003 indexable inserts, enabling use of standard Korloy geometries for finishing and semi‑finishing operations. Which fastening hardware is supplied or required? Fastening is executed with M4x10 Torx screws tightened using a T15 key; these secure the inserts reliably and are compatible with standard workshop torque practices. Is the T310TM suitable for compact toolholders? Yes — the 27 mm mounting diameter and 52 mm total length allow the head to be used in many compact holders and turret systems while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant and straightforward compatibility with BLMP 0904 inserts for continuous, stable facing operations — order the component via Metav Werkzeuge or ask the consultants for tailored procurement support. Face milling head T487-4TM by Teknik Makina — 80 mm, internal coolant A face milling head for BLMP 0904 Indexable Inserts engineered for efficient facing and finishing on medium-duty milling centres, offering a compact 80 mm diameter and integrated internal coolant for enhanced process stability. 80 mm diameter for compact setups Internal coolant for improved chip evacuation Compatible with Taegutec BLMP 0904 inserts High-efficiency facing in compact form The compact design of this milling head concentrates performance into a small envelope: an 80 mm diameter with a total length of 50 mm keeps overhangs minimal and reduces vibration, which directly improves surface finish and tool life. Equipped with 8 cutting edges, the configuration supports fast material removal while maintaining smooth cutting engagement. The combination of reduced runout and multiple cutting edges makes the tool particularly suitable for short to medium-length facing operations where both stability and throughput are priorities. This paragraph explains how the geometry translates into measurable productivity gains for the workshop. Process reliability through internal coolant and robust fastening Integrated internal coolant channels direct cutting fluid precisely to the insert edge, aiding chip control and heat dissipation and lowering thermal load on the insert substrate. The head uses Torx T10 drive interface and M3,5x8,5 fastening screws for secure clamping and straightforward reassembly during index changes. A controlled coolant feed and reliable screw interface reduce unplanned stoppages and support consistent cycle times — an advantage for production environments that demand repeatable quality and low variance between batches. Compatibility, setup simplicity and maintenance benefits Designed specifically for use with BLMP 0904 indexable inserts (Taegutec compatible), the head streamlines tool inventory by matching a widely available insert family. The modest weight of 1.238 kg and familiar fastening standard allow fast tool changes and predictable balancing in systems where minimised downtime is valuable. Maintenance focuses on routine inspection of coolant passages and screw torque checks; straightforward serviceability helps keep preventive maintenance intervals short and effective. The result is a reliable add-on to existing facing toolsets that integrates without the need for lengthy requalification. Procure Teknik Makina milling heads through Metav Werkzeuge for dependable supply and expert guidance — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and delivery options. Technical Data SKU: T487-4TM Product type: Face milling head Compatible inserts: BLMP 0904 (Taegutec) Manufacturer: Teknik Makina Facts Diameter: 80 mm Total length: 50 mm Weight: 1.238 kg Cutting edges: 8 Cutting angle: 100° Special features Internal coolant: yes Torx key: T10 Torx screw: M3,5x8,5 eClass: 21181015 FAQ What insert type is compatible with this head? The face milling head T487-4TM is designed for BLMP 0904 indexable inserts and is compatible with Taegutec BLMP 0904 grades. How does the internal coolant improve performance? Internal coolant in the head directs coolant to the cutting edge to improve chip evacuation and reduce cutting temperature, which helps extend insert life and stabilise surface finish. What fastening standard is used for the inserts? Fastening is achieved with M3,5x8,5 screws using a Torx T10 interface for secure clamping and easy servicing. Is the head suitable for long overhang applications? The compact 80 mm diameter and 50 mm total length are optimised for short to medium overhangs; for long overhangs, toolholder and process assessment is recommended. Who manufactures the milling head and who is responsible for supply? The milling head is manufactured by Teknik Makina; procurement and supply can be arranged via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 80 mm stability, internal coolant and a 45° cutting angle for consistent surface quality and reduced tool change frequency; order supply or request consultancy via Metav Werkzeuge for seamless integration into current workflows. Face milling head T419-1TM — 80 mm diameter with internal coolant (Teknik Makina) Face milling head T419-1TM for HNGX 0906 indexable inserts, engineered for precise facing operations on CNC milling centres and workshop machines. 80 mm diameter for stable facing operations Internal coolant for improved tool life Compatible with HNGX 0906 inserts (Pramet) Six cutting edges, 45° cutting angle Stable cutting performance that increases process reliability The combination of an 80 mm tool body and a 45° cutting angle delivers a balance between radial support and effective shearing action, which helps to reduce chatter and produce a consistent surface finish. The head’s geometry with six cutting edges allows multiple index changes before regrinding or replacement of inserts, lowering running costs and increasing uptime. The robust mass (approx. 1.067 kg) contributes to tool-holder stability without excessive spindle load, supporting repeatable results in sequential facing passes. These technical choices aim to maximise material removal while maintaining component quality and production predictability. Improved coolant supply and straightforward maintenance Equipped with internal coolant, the milling head directs fluid close to the cutting zone to improve chip evacuation and heat control, which in turn extends insert life and reduces built-up edge. Fixing and service procedures use common workshop fittings: Torx T15 key engagement and M4.5x11 screws for secure clamping and quick tool changes. The modular design accepts standard HNGX 0906 inserts (Pramet), enabling fast re‑indexing and simple inventory management since inserts can be stocked separately from the head. The SKU T419-1TM identifies the exact configuration for ordering and spare-part tracking. Flexible integration for production and repairs The head is designed for routine facing tasks across a variety of mill setups where HNGX 0906 inserts are preferred. Compatibility with widely used insert grades from Pramet simplifies qualification and testing on new materials or process parameters. Technical information provided above supports selection for both batch production and repair work where surface quality and process consistency are essential. For clarification on machine compatibility, clamping interfaces or recommended insert grades, technical consultancy is available — Metav Werkzeuge can provide specification matching and delivery advice via email or phone. For tailored advice on integrating the Teknik Cutting Tools face milling head into existing setups, contact Metav Werkzeuge for expert guidance and rapid supply of the T419-1TM listing Technical data Article number: T419-1TM Product type: Face milling head Manufacturer: Teknik Cutting Tools Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.067 kg Number of cutting edges: 6 Cutting angle: 45° Special features Internal coolant: yes Compatible inserts: HNGX 0906 (Pramet) Torx key: T15 Torx screw: M4.5x11 ECLASS: 21181015 FAQ Which indexable inserts fit this milling head? The head accepts HNGX 0906 inserts; compatibility was validated for Pramet grades, ensuring correct seating and cutting geometry for standard facing applications. Does the tool offer internal coolant supply? Yes — the face milling head features internal coolant, designed to direct fluid to the cutting zone and support longer insert life and better chip control. How many usable edges are available before insert replacement? The head accommodates inserts providing multiple cutting positions; the tool is specified with six cutting edges, allowing several index changes per insert. What fastening hardware is required for insert clamping? Insert clamping uses M4.5x11 Torx screws with a T15 driver, enabling secure fixation and straightforward maintenance with common workshop tools. Is the head suitable for standard CNC milling centres? The design targets typical facing operations on milling centres and workshop machines using HNGX 0906 inserts; consult technical matching for specific spindle interfaces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of compact design and reliable insert compatibility to increase machining uptime; the combination of an 80 mm diameter, seven cutting edges and a secure Torx fixing supports precise, repeatable face milling — order the face milling head directly via Metav Werkzeuge or consult our specialists for advice. Face milling head (Planmesserkopf) T472TM — 80 mm, 7 cutters — Teknik Makina The face milling head T472TM is a compact cutter body for indexable inserts, engineered for precise face milling with HNHX 1006 inserts in small- to medium-sized setups 80 mm diameter for compact face milling Seven cutting edges for continuous material removal Compatible with HNHX 1006 Taegutec inserts 27 mm shank diameter, secure M5x12 Torx fixing Consistent surface finish and efficient material removal The face milling head delivers a stable cutting platform that reduces vibration and helps achieve a consistent surface finish across the workpiece. With seven cutting edges engaged, the tool distributes cutting forces evenly, which lowers load per edge and extends the life of each indexable insert. The relatively large number of cutters also increases material removal rate without demanding larger spindle power, contributing directly to improved throughput and shorter cycle times in repetitive face milling operations. Fast, secure mounting for minimal downtime A precise 27 mm mount and a dedicated Torx fixing (screw M5x12, key T20) enable repeatable seating and fast servicing of the cutter body. The mechanical design focuses on quick insert changes and firm clamping to avoid micro-movements under load. This results in reduced set-up time and simpler maintenance procedures, so the workshop benefits from predictable tool change intervals and fewer interruptions to production. Cutting geometry explained for reliable chip control The defined 55° cutting angle promotes a shearing action that reduces cutting forces and encourages stable chip formation at the leading edge. This geometry is particularly effective when paired with the HNHX 1006 insert format from Taegutec, providing a balance between edge strength and chip evacuation. For operators unfamiliar with insert geometry: a higher shear angle generally improves surface quality and can reduce built-up edge under many conditions, leading to fewer reworks and more first-pass compliance. Compact footprint and predictable handling With a nominal 80 mm diameter and an overall length of 50 mm, this cutter body is suitable for confined set-ups where access and clearance are limited. The compact mass (approx. 1.063 kg) makes handling easier during mounting and prevents excessive overhang that could amplify deflection. The combination of compact dimensions and robust construction makes the tool a practical choice for shops seeking reliable finishing with straightforward tool management. For technical advice on integrating the Teknik Makina T472TM into existing tool holders or for assistance with insert selection, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, practise-oriented support and supply Technical Data Article number: T472TM Manufacturer: Teknik Makina Diameter: 80 mm Overall length: 50 mm Shank diameter (mount): 27 mm Number of cutters: 7 Cutting angle: 55° Weight: 1.063 kg Compatible inserts: HNHX 1006 (Taegutec) Torx screw: M5x12, Torx key: T20 Materials / Special features Indexable-insert compatible cutter body Designed for face milling applications Secure Torx clamping for repeatable seating Compact design for limited-access setups FAQ Which inserts fit this cutter body? The cutter body accepts HNHX 1006 indexable inserts; these inserts are compatible with Taegutec geometry and deliver the intended cutting performance when mounted in the T472TM tool. What does the 55° cutting angle mean for cutting performance? A 55° cutting angle produces a shearing action that often reduces cutting forces and improves chip formation, assisting in achieving consistent surface finishes during face milling. How is the cutter secured to the arbor or holder? The tool uses a 27 mm mounting diameter and is fastened using a Torx screw (M5x12) tightened with a T20 key, ensuring repeatable seating and secure fixation during machining. Is the cutter suitable for tight-access applications? Yes; the 80 mm diameter and 50 mm overall length provide a compact footprint that is suitable for restricted working spaces where clearance is limited. What are the handling considerations for workshop staff? At approximately 1.063 kg, the tool is easy to manoeuvre during installation and reduces the risk of overhang-related deflection; standard torque settings for the M5x12 Torx fixing are recommended for consistent clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 80 mm diameter, internal coolant and compatibility with LNMX 1004 indexable inserts to speed up flat-surface machining while maintaining consistent edge life; order the component via Metav Werkzeuge or consult their specialists for application advice. Face milling head T508TM — 80 mm diameter, internal coolant (Teknik Makina) The Face milling head T508TM is a precision tool head designed for efficient face milling with LNMX 1004 indexable inserts in industrial and workshop applications. 80 mm diameter for broad face milling Internal coolant for improved chip evacuation Compatible with LNMX 1004 indexable inserts Ten cutting edges; 90° cutting angle High productivity through geometry and edge count The compact face mill head combines an 80 mm diameter with ten cutting edges, enabling a high material removal rate across broad workpiece surfaces. The tool’s 90° cutting angle delivers true, flat finishes with minimal rework, which translates into shorter cycle times and fewer passes on the machining centre. This geometry is particularly advantageous for batch production and finishing operations where consistent flatness and surface quality drive throughput. Controlled cooling for longer tool life and process stability Built-in internal coolant channels supply cutting fluid directly to the insert zone, improving heat dissipation and chip control. Directed coolant reduces flank wear on the inserts and helps maintain cutting edge integrity over longer toolpaths, which lowers tooling costs per component. The head is supplied with M4x10 Torx screws tightened with a Torx T15 driver for secure clamping and reliable coolant sealing at the insert seats. Compatibility and quick reconditioning for workshop efficiency The milling head accepts LNMX 1004 indexable inserts produced by Korloy, ensuring access to widely available carbide grades and geometries for a range of materials. The modular design allows rapid insert changes and reconditioning, reducing machine downtime. With an overall length of 50 mm and a mass of 0.84 kg, the unit is compact to handle and straightforward to index during tool setup and changeover on standard milling spindles. Engineered for industrial use and predictable outcomes Manufactured by Teknik Makina, this tool head focuses on repeatable results and robustness required in professional shops. Its specification supports operations on common substrates where a perpendicular face is required. The combination of diameter, cooling and proven insert standardisation makes it a pragmatic choice for operations seeking measurable gains in cycle time and process reliability. For procurement guidance or to secure the Teknik Makina face milling head with internal coolant and LNMX 1004 compatibility, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T508TM Product type: Face milling head Compatible inserts: for LNMX 1004 indexable inserts Manufacturer: Teknik Makina Core measurements and specifications Diameter: 80 mm Overall length: 50 mm Weight: 0.84 kg Number of cutting edges: 10 Cutting angle: 90° Internal coolant: yes Torx screw: M4x10 Torx key size: T15 Features and compatibility Suitable for LNMX 1004 indexable inserts Supplied for use with Korloy inserts Designed for face milling and flat-surface finishing Compact construction for standard milling spindles FAQ What inserts fit this milling head? The face milling head accepts LNMX 1004 indexable inserts; the unit is specified for common LNMX 1004 grades, including those supplied by Korloy. Is coolant integrated into the tool? Yes, the T508TM features internal coolant channels that deliver fluid to the insert zone for improved cooling and chip control. Which fastening hardware is used for the inserts? Inserts are secured with M4x10 Torx screws; a Torx T15 driver is used for tightening to ensure consistent clamping. Is this head suitable for production environments? The design of this cutter head emphasises repeatability and quick reconditioning, making it appropriate for industrial and repetitive production use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of an 80 mm diameter and a 45° cutting angle to achieve smooth, efficient facing operations; the compact 27 mm shank ensures rigid mounting and reduced vibration for consistent cycle times. Order the facing cutter head directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Facing cutter head T782TM — 80 mm diameter, 45° cutting angle (Teknik Cutting Tools) A robust facing cutter head Facing cutter head T782TM engineered for precision facing with ONMX 0806 indexable inserts across light and medium production tasks. 80 mm diameter for wide facing areas 45° cutting angle for smooth surface finish 27 mm shank for rigid machine mounting Compatible with major ONMX 0806 insert brands Precision that improves process reliability The facing cutter head delivers repeatable results thanks to its 45° cutting angle and six cutting edges, which together reduce cutting forces and produce a finer surface finish on the workpiece. Designed for use with ONMX 0806 indexable inserts, the unit combines multiple cutting edges with a compact head diameter to maintain material removal rates while shortening downtime for tool changes. The controlled geometry helps to limit chatter and maintain tolerances in series production, supporting a predictable machining process and less rework. Fast insert changes and broad compatibility Insert management is simplified by the standard M5x12 Torx screw fastening and the specified T20 Torx key size, enabling rapid replacement of worn inserts and straightforward inventory planning for tooling departments. The head is compatible with inserts from ISCAR, Korloy, LMN and YG‑1, allowing integration into existing tool assortments and making it easier to source cutting edges with preferred grades and coatings. This compatibility reduces lead times and increases flexibility when adapting to different workpiece materials or cutting strategies. Stable mounting for consistent machining quality A 27 mm shank diameter provides a rigid connection to the toolholder, while the modest overall length of 50 mm keeps overhang low to minimise deflection during facing passes. At approximately 0.532 kg, the assembly balances mass for stability without imposing excessive load on smaller spindle heads. The compact footprint of the head supports efficient toolset-up in confined turret stations and helps to maintain consistent cutting geometry in repetitive operations, improving throughput and lowering the likelihood of machining errors. Contact Metav Werkzeuge today for expert advice on the Teknik Cutting Tools facing cutter head and secure, reliable supply from our Emmerich warehouse Technical data Article number: T782TM Manufacturer: Teknik Makina Suitable for inserts: ONMX 0806 Compatible insert manufacturers: ISCAR, Korloy, LMN, YG-1 Torx screw: M5x12 Torx key: T20 Core data Diameter: 80 mm Number of cutting edges: 6 Cutting angle: 45° Shank diameter: 27 mm Overall length: 50 mm Weight: 0.532 kg Special features For ONMX 0806 indexable inserts Compatible with major ONMX 0806 insert brands Torx screw M5x12 Torx key size T20 FAQ What inserts fit the facing cutter head? The facing cutter head accepts ONMX 0806 indexable inserts and is compatible with inserts from ISCAR, Korloy, LMN and YG‑1. Which fastening hardware is required for insert changes? Insert clamping is secured with an M5x12 Torx screw; the corresponding Torx key size is T20. What are the mounting dimensions of the head? The head has a 27 mm shank diameter and an overall length of 50 mm, suitable for compact turret and toolholder setups. Is the cutter head suitable for high‑volume production? The combination of six cutting edges, a 45° cutting angle and a rigid shank supports stable, repeatable facing operations in serial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of high productivity, precise engagement with ONMX 0806 inserts and integrated coolant management for steady production. Choose an 80 mm diameter solution with solid build quality to reduce downtime — order directly via Metav Werkzeuge or consult their specialists for tailored advice. Face milling head for ONMX 0806 indexable inserts — 80 mm diameter, internal coolant (Teknik Makina) Face milling head designed for efficient face milling with ONMX 0806 indexable inserts, providing reliable coolant delivery and secure insert clamping for industrial workshop use 80 mm diameter for broad face milling Internal coolant for improved tool life Compatible with ONMX 0806 indexable inserts Six cutting edges, 45° cutting angle Maximise material removal with a compact, stable design The 80 mm diameter body and a compact overall length of 50 mm make this face milling head suitable for tight setups where both accessibility and performance matter. The combination of a robust body and a calculated 45° cutting angle results in a reduced cutting force per insert and more even load distribution across the tool, which in turn helps to maintain surface quality and extend machining cycles. For production environments where cycle time and repeatability are paramount, this configuration supports higher metal removal rates without sacrificing stability. Coolant exactly where it is needed for longer insert life Built-in internal coolant channels deliver cutting fluid directly to the insert cutting zone, improving chip evacuation and reducing thermal load on the cutting edge. Internal coolant is especially valuable when machining under continuous or heavy cut conditions, because it lowers the risk of edge wear and heat-related microfractures. By channeling coolant to the insert seat, the system contributes to a more consistent surface finish and longer intervals between insert changes, translating technical coolant routing into measurable shop-floor benefits. Fast, secure insert clamping cuts service time The head accommodates ONMX 0806 indexable inserts and secures them with Torx T20 fastenings using M5x12 screws, providing a repeatable and torque-controlled clamping method. The use of Torx fixation reduces the chance of cam-out and allows reliable torque transmission during tightening. With six cutting edges configured around the periphery, the tool achieves smooth engagement and balanced cutting forces; this reduces vibration and helps to preserve machine spindle health. The straightforward fastening format supports rapid insert replacement and predictable maintenance intervals. Designed for pragmatic workshop integration Manufactured by Teknik Makina and supplied under SKU T782-1TM, the head’s modest weight (approx. 0.532 kg) and short envelope make it suitable for a range of face-milling tasks where tool clearance and fixture space are limited. The product’s compatibility with a widely used insert type simplifies inventory management and reduces the need for multiple different cutter bodies. Where technical certainty is needed, the clear specification of interface screws and key type enables quick planning for tooling and spare-part provisioning, helping to keep production predictable and efficient. Discuss specific machining requirements with Metav Werkzeuge to confirm suitability for the intended application and arrange supply of the Teknik Makina face milling head with internal coolant — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T782-1TM Product type: Face milling head Compatible inserts: ONMX 0806 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 80 mm Overall length: 50 mm Weight: 0.532 kg Cutting edges: 6 Cutting angle: 45° Internal coolant: Yes Special features Torx key: T20 Torx screw: M5x12 Label: 80 mm face milling head ONMX 0806 L50 mm with internal coolant UID: T782-1TM FAQ Which inserts are compatible with this head? The face milling head accepts ONMX 0806 indexable inserts; this compatibility is central to the design and recommended for reliable performance. Is coolant delivered through the head? Yes — the head features internal coolant channels that direct fluid to the insert zone to aid chip evacuation and reduce cutting temperatures. How many cutting edges does the head provide and what is the cutting angle? The tool is configured with six cutting edges and a 45° cutting angle, offering balanced cutting forces and efficient material removal. What fastening system is used for the inserts? Inserts are secured with Torx T20 screws (M5x12), enabling controlled torque application and reduced risk of stripping during maintenance. What are the key dimensions to check for machine compatibility? Important dimensions are 80 mm diameter and 50 mm overall length; check these against the machine and fixture clearance before installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of an efficient combination of a wide 80 mm cutting diameter and internal coolant to boost cycle times and reduce tool changes; request a quote or technical advice from Metav Werkzeuge to integrate this cutter into existing workflows. Face milling head for PNHX 1105 indexable inserts – 80 mm with internal coolant (Teknik Makina) The Face milling head for PNHX 1105 indexable inserts is a robust solution for high-volume face milling in general machining, designed to accept Palbit PNHX 1105 inserts for reliable material removal. 80 mm diameter for broad face milling Internal coolant for improved tool life 8 cutting edges for high material removal Compatible with PNHX 1105 Palbit inserts Faster metal removal with fewer interruptions The milling head combines an 80 mm tool body with 8 cutting edges, allowing larger engagement per revolution and therefore a measurable increase in material removal rate. This configuration reduces the number of tool changes required on the shop floor, shortening cycle times and improving per-shift throughput. The design supports stable cutting even at heavier radial depths, which benefits both batch production and single-part manufacture by delivering consistent surface finish and dimensional conformity. Directed cooling and secure clamping to extend service life Integrated internal coolant channels deliver lubricant and coolant precisely to the cutting zone, lowering temperatures and flushing chips away from the insert pockets. This targeted cooling reduces flank wear and extends insert life, translating into lower tooling costs over time. Fastening is executed with a M4x10 Torx screw tightened using a T15 key, providing a reliable clamp that resists vibration and ensures repeatable seat contact after index changes. Exact fit for PNHX 1105 inserts and stable cutting geometry Compatibility with PNHX 1105 indexable inserts and Palbit standards ensures rapid tooling swaps and broad availability of grades for steel, stainless steel and cast materials. The cutter’s maximum effective cutting diameter of 89 mm and a cutting angle of 60° produce an advantageous balance between cutting force and chip formation, helping to maintain tool life while achieving the desired surface quality. The overall length of L50 mm supports compact setups and reduces overhang, which aids stiffness and positional accuracy. Practical advantages for production and workshop environments The combination of a compact tool body, standardised Torx clamping and clear compatibility with established insert systems makes this milling head straightforward to adopt in existing tool chains. With a service weight of 1.224 kg, the tool delivers mass for dampening without excessive inertia, improving stability in interrupted cuts. The construction favours scheduled maintenance cycles and predictable consumable use, making it a cost-efficient choice where uptime and supply reliability are priorities. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools face milling head into production and to secure dependable supply directly from Emmerich. Technical data SKU: T678TM Product type: Face milling head Label: 80mm Planmesserkopf PNHX 1105 L50mm mit Innenkühlung Brand: Teknik Makina Numbers / Core technical data Diameter: 80 mm Max cutting diameter: 89 mm Overall length: 50 mm Weight: 1.224 kg Cutting edges: 8 Cutting angle: 60° Designs / Special features Internal coolant For PNHX 1105 indexable inserts Compatible with Palbit inserts Fastening: Torx screw M4x10 Torx key: T15 FAQ What inserts does the milling head accept? The milling head is designed for PNHX 1105 indexable inserts and is specified for compatibility with Palbit insert geometries and grades. Is the tool suitable for heavy roughing? Yes, the combination of 8 cutting edges and the robust tool body supports higher material removal rates suitable for roughing operations in many production contexts. How does the internal coolant improve performance? Internal coolant channels deliver fluid directly to the cutting zone, reducing temperatures and chip accumulation, which in turn extends insert life and stabilises cutting conditions for the face milling head. What fastening system secures the inserts? Inserts are secured with a Torx screw M4x10 using a T15 key, providing repeatable clamping force and resistance to vibrational loosening. Can this tool be used for stainless steel or cast iron? Yes, the cutter’s geometry and the availability of appropriate PNHX 1105 insert grades make it adaptable for stainless steels and cast iron when the correct insert grade is selected. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tool body with a 80 mm head and 94 mm maximum cutting diameter for efficient face work; the robust fastening using an M4.5x11 Torx screw (T15) and the six cutting edges ensure stable chip removal and predictable tool life. Order the planing cutter head directly via Metav Werkzeuge or ask our consultants if needed. Planing cutter head T302TM — 80 mm diameter, for SDHT 1204 indexable inserts (Teknik Makina) The Planing cutter head T302TM is a compact face machining head designed for precise planing and finishing operations with SDHT 1204 indexable inserts For SDHT 1204 indexable inserts 80 mm head diameter for compact setups Six cutting edges for even material removal Faster face machining with reliable geometry The 80 mm head and six cutting edges deliver a balanced cut that reduces vibration and improves surface finish. By distributing the cutting load across multiple edges, the tool achieves consistent chip evacuation and lower cutting forces, which translates into longer insert life and fewer machine interruptions. The head’s 45° cutting angle is optimised for a compromise between shear and plunging action, making it suitable for both light finishing and moderate stock removal. Easy maintenance and secure clamping for workshop efficiency Fast and secure clamping is provided by the M4.5x11 Torx screw (requires a T15 key), allowing quick insert changes and minimal downtime. The straightforward fastening avoids complex setup procedures and supports reproducible positioning of the indexable inserts. With a 27 mm mounting bore and a compact overall length of 52 mm, the unit fits into many standard toolholders, simplifying tool management in mixed-production environments. Clear compatibility for predictable procurement Engineered specifically for SDHT 1204 indexable inserts, the tool body eliminates ambiguity when specifying replacement parts and reduces the risk of mismatched components. The construction is optimised for a maximum cutting diameter of 94 mm, so set-up parameters can be planned in advance and cutting data tables adjusted accordingly. The compact mass of 1.2 kg helps maintain spindle balance and contributes to repeatable machining results. Practical benefits for shop floors and OEM workshops The compact design and compatibility reduce the number of specialised holders required in a tool crib, helping to centralise tooling choices and improve reorder clarity. The robust tool geometry and standardised screw interface also facilitate safer handling and predictable service intervals. For applications ranging from light finishing to medium-duty planing, the head offers a practical combination of performance and simplicity that supports steady production throughput. For procurement or technical clarification on the Teknik Makina planing cutter head, contact Metav Werkzeuge for direct supply and tailored advice — Metav Werkzeuge ensures reliable delivery from Emmerich and expert guidance for workshop integration Technical Data Article number: T302TM Product: Planing cutter head for SDHT 1204 indexable inserts Brand: Teknik Makina eClass: 21181015 Facts Head diameter: 80 mm Max cutting diameter: 94 mm Shank / mounting bore: 27 mm Number of cutting edges: 6 Cutting angle: 45° Overall length: 52 mm Weight: 1.2 kg Special features Compatible with SDHT 1204 indexable inserts Fastening: M4.5x11 Torx screw Torx key size: T15 SKU: T302TM FAQ What inserts fit this cutter head? The head is designed for SDHT 1204 indexable inserts; the T302TM accepts these inserts for reliable seating and repeatable cutting performance. What is the maximum cutting diameter for this tool? The maximum cutting diameter is 94 mm, which should be considered when planning engagement and toolpath strategies. Which fastening is used to secure the inserts? Inserts are clamped with an M4.5x11 Torx screw; a T15 key is required for tightening and replacement operations. Is the tool suitable for finishing operations? Yes, the combination of a 45° cutting angle and six cutting edges provides a stable cut suitable for finishing and moderate stock removal. How should the T302TM be specified when ordering? Order using the article number T302TM and specify compatibility with SDHT 1204 inserts to ensure correct delivery. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact 80 mm diameter head with internal coolant and six indexable cutting edges for reliable face milling performance; order the face milling head directly via Metav Werkzeuge for fast supply or consult the technical team for application advice. Face milling head T302-1TM — 80 mm, internal coolant (Teknik Makina) Face milling head T302-1TM designed for high-feed finishing with SDHT 1204 indexable inserts, offering stable coolant delivery and precise mounting for workshop and production use 80 mm diameter for compact machining Integrated internal coolant delivery Compatible with SDHT 1204 inserts Six indexable cutting edges for continuity 45° cutting angle for smooth chip flow Consistent surface quality through optimised chip control The compact milling head delivers predictable results by combining an 80 mm diameter body with a 45° cutting angle, which together promote smooth chip formation and reduced vibration. Internal coolant channels keep the cutting zone clear and cool, improving tool life and surface finish. For operations where repeatability matters, the combination of balanced geometry and directed coolant helps maintain tolerances and reduces secondary finishing work. The robust design supports steady cutting conditions across batch runs and short production cycles. Reduced setup time and reliable clamping for shop-floor efficiency The head features a precise mounting interface and uses Torx T15 screws (M4.5x11) for secure attachment, simplifying repeat setups and lowering the risk of misalignment. The configuration with six inserts allows interrupted cuts to continue with minimal variation, meaning fewer tool changes and less downtime. The overall length of 52 mm and a weight of 1.214 kg give a compact, stable tool that is easier to handle during tool changes, which benefits both small workshops and industrial machining cells by making fixture and handling routines more efficient. Fast insert replacement and compatibility with standard indexables Designed specifically for SDHT 1204 indexable inserts, the milling head supports rapid insert changes to keep machines productive. The modular insert system means stock can be standardised across multiple tools, simplifying logistics and reducing inventory complexity. The T302-1TM head’s six cutting positions provide a continuous cutting profile and allow quick restoration of cutting geometry without extensive regrinding, which is advantageous for shops aiming to maximise cutter utilisation and minimise non-productive time. Application scope and material handling advantages This face milling solution is suitable for a broad range of finishing tasks where controlled chip evacuation and consistent edge engagement are required. The directed coolant and stable cutter geometry make it suitable for common workshop materials and finishing passes where surface integrity is critical. With its compact form factor and compatibility with industry-standard inserts, the head supports flexible use across milling centres and horizontal machines, while providing the precision expected from dedicated milling assemblies. Contact Metav Werkzeuge for tailored advice and to secure the Teknik Cutting Tools face milling head T302-1TM with internal coolant; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: T302-1TM Product type: Face milling head Article name: Face milling head for SDHT 1204 indexable inserts Brand: Teknik Makina Facts Diameter: 80 mm Maximum cutting diameter: 94 mm Overall length: 52 mm Weight: 1.214 kg Number of cutting edges: 6 Cutting angle: 45° Screw: M4.5x11 Torx key: T15 Special features Internal coolant Compatible with SDHT 1204 indexable inserts Six indexable cutting positions Compact, workshop-friendly design FAQ Which inserts fit this milling head? The face milling head accepts SDHT 1204 indexable inserts; the T302-1TM is configured specifically for that insert geometry and seating. Is the tool suitable for finishing passes on steel? Yes, the head’s geometry and internal coolant support finishing on typical steels when paired with appropriate SDHT 1204 insert grades. What fastening hardware is supplied with the head? Fastening uses M4.5x11 Torx screws with Torx T15 drive; the T302-1TM is designed for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust facing solution that combines an 80 mm cutting diameter, internal coolant and six indexable cutting edges for stable, efficient facing operations; order the tool through Metav Werkzeuge or consult our specialists for application advice. Facing head for SEET 12T3 Indexable Inserts — 80 mm diameter, internal coolant (Teknik Makina) The Facing head for SEET 12T3 indexable inserts is a compact face-milling solution designed for precision facing and light planning tasks on CNC lathes and milling centres. 80 mm diameter cutting head Internal coolant supply Six indexable cutting edges 45° cutting angle for efficient cutting High material removal with predictable precision This compact cutter combines an 80 mm diameter with a 45° cutting angle and six indexable cutting edges, delivering a balance between material removal rate and surface finish. Compatibility with SEET 12T3 indexable inserts means quick edge changes and consistent geometry without complex setup. The head’s geometry reduces cutting forces through the inclined approach, which helps maintain machine stability and lowers vibration—factors that contribute to repeatable results and less rework on the shopfloor. Integrated coolant for longer tool life and cleaner chips An internal coolant channel directs fluid to the cutting zone, improving heat control and chip evacuation during facing operations. This targeted cooling reduces thermal load on the cutting edge and supports longer tool life for the inserts. The secure fixing of the inserts uses M3.5x8.5 screws tightened with a Torx T15 key, ensuring a reliable mechanical connection and simplified maintenance when insert changes are required. Compact dimensions for versatile machine integration With a 52 mm overall length and a mass of 1.305 kg, the head provides a compact footprint without sacrificing rigidity. The reduced overhang assists in minimising chatter and enables use in tighter setups where longer tooling would be impractical. The compact design also supports faster tool index changes, helping to reduce cycle-time losses during multi-operation sequences. Practical choice for production and small-batch work The head is tailored for repetitive facing tasks where fast insert indexing and straightforward serviceability are priorities. The combination of the SEET 12T3 system and indexed cutting edges allows economical use of each insert, while the coolant capability supports consistent cutting conditions across batches. This makes the tool suitable for both small-batch shops and production lines seeking predictable process windows. For precise, reliable facing operations select the Teknik Cutting Tools facing head (SKU T436-1TM) and contact Metav Werkzeuge in Emmerich for ordering details and application guidance — info@metav-werkzeuge.com, +49 2822 7131930. Technical data SKU: T436-1TM Label: 80mm facing head SEET 12T3 L52mm Product type: Facing head Compatible inserts: SEET 12T3 Internal coolant: yes Core data Diameter: 80 mm Overall length: 52 mm Weight: 1.305 kg Cutting edges: 6 Cutting angle: 45° Special features Torx key: T15 Torx screw: M3.5x8.5 Compact design for tight setups Indexable insert system for fast changes FAQ Which inserts are compatible with this facing head? The facing head is compatible with SEET 12T3 indexable inserts; this insert family provides straightforward indexing and consistent cutting geometry for facing applications. Does the tool support through-tool cooling? Yes, the head features internal coolant to deliver lubricant directly to the cutting zone, improving chip control and thermal management during machining. What fasteners are required for insert clamping? Inserts are secured with M3.5x8.5 screws tightened using a Torx T15 key, ensuring a secure and serviceable connection. Is this facing head suitable for compact machine setups? With a 52 mm overall length and a mass of 1.305 kg, the head is designed for compact integration where rigidity and minimal overhang are important for stable machining results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert compatibility, internal coolant for improved chip control and a compact 80 mm diameter for efficient face milling. Order the assembly directly via Metav Werkzeuge or consult the Metav team for integration advice. Face milling head T564-1TM – 80 mm diameter, internal coolant (Teknik Makina) The Face milling head for SEET 12T3 indexable inserts is a compact cutting solution designed for productive face milling and finishing tasks in general workshop and light industrial applications. 80 mm diameter for broad material engagement Internal coolant supply for improved chip evacuation Compatible with SEET 12T3 indexable inserts Robust construction with six cutting edges Faster material removal with fewer tool changes The cutter head is engineered to deliver a consistently high metal removal rate: the 80 mm diameter combined with a 45° cutting angle allows an efficient engagement that balances cutting force and surface finish. The presence of six cutting edges means more cumulative cutting length per tool body, reducing changeover frequency and keeping the machining process productive. Indexable inserts are used instead of brazed cutters, so worn edges are replaced quickly; this reduces downtime and simplifies spare-part management. Cooler cutting zone and easier chip control Equipped with internal coolant, the assembly channels coolant directly to the cutting edges to lower tool temperature and assist in chip evacuation. This design reduces thermal wear on the inserts and helps maintain consistent edge life across production batches. The coolant feature, paired with the head’s rigid build and a mass of 1.206 kg, supports stable cutting conditions; the result is improved workpiece quality and fewer reworks over time. The Torx fastenings (Torx key T15, screws M3.5x11) permit straightforward insert clamping and secure fixation. Simple integration and broad compatibility for workshop use Compatibility with SEET 12T3 indexable inserts makes the head versatile across various materials and applications; customers can select grades and geometries to suit aluminium, steel or other workpieces. The overall length of 50 mm keeps the tool compact for machines with limited tool overhang, aiding rigidity and repeatability. The product is supplied under SKU T564-1TM, enabling clear procurement and stock management. For users less familiar with indexable tooling, inserts are replaceable tips that carry the cutting edge, allowing quick maintenance without regrinding. For reliable face milling performance from Teknik Makina, contact Metav Werkzeuge in Emmerich for tailored application advice and fast, dependable supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability. Technical data SKU: T564-1TM Product type: Face milling head For indexable inserts: SEET 12T3 Manufacturer: Teknik Makina Dimensions & weight Diameter: 80 mm Overall length: 50 mm Weight: 1.206 kg Number of cutting edges: 6 Cutting angle: 45° Features & compatibility Internal coolant Torx key: T15 Torx screw: M3.5x11 Eclass: 21181015 Label: 80mm Planmesserkopf SEET 12T3 L50mm FAQ Which inserts are compatible with this milling head? The head is designed for SEET 12T3 indexable inserts; insert choice (grade, geometry) determines suitability for specific materials and finish requirements. Is the coolant delivered directly to the cutting edge? Yes, the internal coolant channel supplies fluid directly to the cutting zone to reduce temperature and aid chip evacuation, improving insert life. How many cutting edges are available before replacement? The assembly holds six cutting edges in total; insert replacement frequency depends on material, feed and speed but the head permits rapid tip changes. What tools are required for insert changes? Torx fastening is used: a T15 Torx key is required and the fixing screws are M3.5x11. Can this head be used on machines with limited overhang? With an overall length of 50 mm the head is compact and suitable for installations where tool overhang must be kept short to preserve rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust material removal, precise coolant delivery and wide insert compatibility for reliable face-milling operations; order directly via Metav Werkzeuge or contact our consultants for application advice. Face-milling head T166-1TM – 80 mm diameter, internal coolant (Teknik Makina) The Face-milling head T166-1TM is a compact, high-capacity cutter designed for face milling with SNEU 1206 indexable inserts, optimised for both workshop and industrial CNC use. 80 mm diameter for broad material engagement Integrated internal coolant for improved chip control Compatible with SNEU 1206 Walter indexable inserts Seven cutting edges for efficient material removal Consistent productivity through optimised cutting geometry The head’s 80 mm diameter and 45° cutting angle deliver a balance of axial engagement and surface finish, allowing stable passes on flat surfaces while controlling radial forces. The seven cutting edges reduce the frequency of tool changes, increasing uptime in batch and continuous production. For machines where consistent material removal rate is critical, this design contributes to a predictable cycle time and fewer interruptions during the machining process. Longer insert life and cleaner chips with internal coolant Direct coolant supply to the cutting zone keeps temperatures down and improves chip evacuation, which helps protect insert edges and maintain dimensional stability. The integrated internal coolant system channels fluid precisely to the cutter tips, supporting higher metal-removal rates without compromising tool life. Compatibility with SNEU 1206 inserts ensures a broad selection of grades and geometries; the option to use Walter-approved inserts widens the choice for application-specific coatings and substrates. Secure mounting and service-friendly maintenance for workshop use Fastening is achieved with M5x12 Torx screws tightened with a T20 key, providing reliable clamping with straightforward maintenance procedures. The head’s overall length 50 mm and mass of 1.252 kg contribute to a compact, well-supported setup that reduces vibration on medium-duty spindles. Clear mechanical interfaces and standard screw formats simplify reassembly and balancing after insert changes, making this head suitable for routine shop workflows and industrial CNC environments. Contact Metav Werkzeuge today for tailored selection support and dependable supply from Emmerich — expert advice and fast delivery for Teknik Makina tools are available on request. Technical Data SKU: T166-1TM Product type: Face-milling head For indexable inserts: SNEU 1206 Compatible insert manufacturer: Walter Manufacturer: Teknik Makina Facts Diameter: 80 mm Max cutting diameter: 93 mm Overall length: 50 mm Weight: 1.252 kg Cutting angle: 45° Cutting edges: 7 Torx key: T20 Torx screw: M5x12 Special features Internal coolant Suitable for face milling Compatible with Walter inserts Robust construction for CNC use Label: 80mm Planmesserkopf SNEU 1206 L50mm mit Innenkühlung FAQ What insert type is required for this face-milling head? The head accepts SNEU 1206 indexable inserts; the design supports standard insert geometries for face milling. Is internal coolant provided and how does it help? Yes, the integrated internal coolant supplies fluid directly to the cutting zone, which improves chip evacuation and extends insert life. Which manufacturer makes this tool and what is the SKU? This product is supplied by Teknik Makina and sold under SKU T166-1TM for easy identification. Can Walter inserts be used with this milling head? Compatibility with Walter indexable inserts is specified, allowing choice of graded inserts for different materials. What fastening hardware is used for insert clamping? Insert clamping uses M5x12 Torx screws tightened with a T20 key for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant and compatibility with SOET 13 indexable inserts for reliable face milling performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head T636TM — 80 mm diameter, internal coolant (Teknik Makina) The face milling head T636TM is a precision cutter designed for heavy-duty face milling with SOET 13 indexable inserts, featuring internal coolant for effective chip evacuation and consistent edge life. 80 mm diameter for wide face milling Internal coolant for improved cooling Accepts SOET 13 indexable inserts Six cutting edges, 90° cutting angle Consistent cooling and predictable tool life The combination of internal coolant and a compact 80 mm body ensures stable cutting conditions and reduced thermal wear on the insert seat. This results in more consistent edge life and fewer interruptions for insert changes, which supports continuous production cycles. For shops upgrading from conventional heads, the integrated coolant channel reduces heat at the cutting zone and improves chip control without adapting existing coolant supplies. High compatibility for workshop standardisation Designed specifically for SOET 13 indexable inserts and compatible with inserts from Palbit, the cutter head simplifies inventory by allowing a common insert family to be used across multiple operations. The 90° cutting angle provides true face finishes and minimal deflection in planing tasks, while accepting widely available insert geometries helps to keep tooling costs predictable and logistics straightforward. Secure fastening and straightforward maintenance The head uses M3.5x8.5 Torx screws tightened with a T15 key for repeatable clamping torque; this combination gives reliable insert fixation and quick, safe replacement cycles. The six cutting edges distribution reduces individual insert load and balances the cutter dynamically, improving surface quality. Essential service tasks can be completed with standard workshop tools, limiting downtime and maintaining productivity. Compact dimensions for versatile machine compatibility With an 80 mm diameter, a 50 mm overall length and an arbor fit of 27 mm, the cutter head fits many compact milling setups and is suitable for both small batch and series production. The weight of 1.354 kg provides a low-inertia profile that responds well on medium-speed spindles while still delivering the rigidity required for flat-face machining. This balance aids fast set-ups and efficient material removal without unnecessary machine load. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Teknik Makina face milling head T636TM into existing workflows or to request a detailed quotation and delivery options Technical Data SKU: T636TM Product type: Face milling head Brand: Teknik Makina For: SOET 13 indexable inserts Label: 80mm Planmesserkopf SOET 13 L50mm mit Innenkühlung Core specifications Diameter: 80 mm Overall length: 50 mm Weight: 1.354 kg Cutting edges: 6 Cutting angle: 90° Arbor diameter: 27 mm Torx key: T15 Torx screw: M3.5x8.5 Design & features Internal coolant: yes Compatible inserts manufacturer: Palbit Intended insert style: SOET 13 ECLASS: 21181015 UID/SKU: T636TM FAQ Can this head use Palbit SOET 13 inserts? Yes. The Teknik Makina face milling head T636TM is designed for SOET 13 inserts and is compatible with Palbit indexable inserts. Is internal coolant available through the cutter body? Internal coolant is provided; the head features integrated channels for directed coolant flow to the cutting zone. What arbor size is required for mounting? The cutter accepts a 27 mm arbor as indicated by the arbor diameter specification. How many inserts are installed and what is the cutting geometry? The head carries six inserts arranged for a 90° cutting angle, optimised for flat face milling. Which tools are needed to change inserts? Insert retention uses M3.5x8.5 Torx screws tightened with a T15 key for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of robust build quality, internal cooling, and precise compatibility with WNMX 1305 indexable inserts for reliable, repeatable face milling. For procurement and technical questions, contact Metav Werkzeuge or consult the specialist team for swift advice. Face milling head — for WNMX 1305 indexable inserts, 80 mm diameter, internal coolant (Teknik Makina) Face milling head for CNC face milling applications, engineered to accept WNMX 1305 indexable inserts and optimised for effective chip evacuation and consistent surface quality. 80 mm diameter for stable face milling Internal coolant for improved tool life Compatible with Korloy WNMX 1305 inserts Five cutting edges for increased productivity Higher metal removal with stable cutting conditions The milling head delivers measurable performance gains by combining an 80 mm diameter body with five cutting edges, which allows for larger depth of cut at controlled chatter levels. The larger cutting capacity reduces cycle times and increases throughput in repetitive machining tasks. The head’s mass (approx. 1.04 kg) contributes to stability during face cuts, translating technical parameters into a tangible improvement in process efficiency and surface consistency. Cleaner chips and longer insert life through internal coolant Equipped with internal coolant, the unit directs cutting fluid close to the cutting edge to support cooling and chip evacuation. For shops that aim to extend insert lifetime and maintain a steady cutting temperature, through-flow cooling reduces thermal load on the insert and minimises built-up edge formation. This technical feature converts into lower tooling consumption and fewer unscheduled tool changes during production runs. Straightforward installation and secure clamping The component uses a M4x10 torx screw with a T15 key interface for insert clamping, enabling fast and repeatable set-ups on toolholders designed for face milling heads. The straightforward fastening system reduces changeover time and lowers the risk of incorrect torquing when compared with more complex clamping systems. Clear, industry-standard fixing elements assist maintenance teams and operators in sustaining process reliability. Compatibility tailored for indexable inserts and practical workshop use Designed specifically for WNMX 1305 indexable inserts, the milling head is compatible with inserts from Korloy, which allows procurement teams to align existing supply chains without costly requalification. The nominal overall length L50 mm makes it suitable for a broad range of face milling fixtures while preserving accessibility at the cutter margin. The combination of compatibility and standard connection hardware supports a smooth integration into established tool sets. Discuss the Teknik Makina face milling head (SKU T688-1TM) with Metav Werkzeuge in Emmerich to confirm fitment and secure reliable supply directly from our European stock Technical data SKU: T688-1TM Product type: Face milling head Designation: Planmesserkopf for WNMX 1305 indexable inserts Manufacturer: Teknik Makina Compatible inserts: WNMX 1305 Compatible insert brand: Korloy Internal coolant: Yes Number of cutting edges: 5 Core specifications Diameter: 80 mm Overall length: 50 mm Weight: 1.04 kg Torx key: T15 Torx screw: M4x10 Features & compatibility Designed for face milling applications Accepts WNMX 1305 indexable inserts Through-coolant capability for better cooling and chip control Manufacturer SKU T688-1TM Produced by Teknik Makina FAQ Which insert type fits this milling head? The head is designed for WNMX 1305 indexable inserts and accepts those inserts manufactured to that specification. Can Korloy inserts be used with this tool? Yes, the face milling head is compatible with Korloy WNMX 1305 inserts as indicated in the product data. Is there internal coolant provision? Internal coolant is provided; the through-coolant capability helps cooling at the cutting edge and improves chip evacuation. How many cutting edges does the head support? The cutter body features five cutting edges, enabling extended cutting engagement and improved material removal rates. What fastening hardware is required for the inserts? Inserts are secured with M4x10 torx screws using a T15 torx key, providing a standard and reliable clamping method. Who manufactures this milling head and what is the SKU? The component is produced by Teknik Makina and listed under SKU T688-1TM for straightforward identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable face milling with clear compatibility for WNMX 1305 indexable inserts and an 80 mm cutter diameter delivers efficient, repeatable material removal; paired with a 27 mm shank and Torx T15/M4x10 fastening for secure clamping and straightforward maintenance — order the face mill head directly via Metav Werkzeuge or consult our specialists for fitment advice. Face mill head for WNMX 1305 indexable inserts — 80 mm, 5 cutting edges (Teknik Makina) The face mill head for WNMX 1305 indexable inserts is engineered for robust face milling in production and workshop environments, combining a compact 80 mm cutter diameter with a stable 27 mm mounting to support continuous chip removal and predictable cutting performance. Face mill head for WNMX 1305 inserts 80 mm cutter diameter, robust construction 5 cutting edges for continuous material removal 27 mm shank diameter for stable mounting Torx T15 screw with M4x10 fastening Stable compatibility that simplifies tool planning The head is built specifically for WNMX 1305 style indexable inserts, with compatibility tested against the Korloy insert range. This targeted fit reduces inventory complexity and allows straightforward tool selection for series production. By matching the insert geometry, the assembly supports consistent chip evacuation and surface quality, making it easier to plan tool life and replacement cycles without guesswork. Secure clamping and quick service intervals Clamping reliability comes from the 27 mm shank and standardised screw interface. The use of a Torx T15 key and M4x10 fastening provides a secure connection that resists loosening under typical face milling loads while remaining service-friendly for insert changes. The design of the clamping system supports brief maintenance intervals and reduced machine downtime, translating into higher production availability and lower indirect costs. Designed for efficient face milling and predictable output With an 80 mm diameter and an overall height of 50 mm, the tool body concentrates stiffness where it matters to maintain cutting angles under load. The configuration with 5 cutting edges distributes engagement across the tool circumference, enabling smooth cutting action and even wear progression. Supplied by Teknik Cutting Tools, the assembly is suited to continuous face milling tasks where repeatability and straightforward insert handling are priorities for shop-floor efficiency. For procurement or technical clarification on the Teknik Cutting Tools face mill head (SKU T688TM), contact Metav Werkzeuge in Emmerich for personalised advice and fast processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T688TM Name: Planmesserkopf Variant: for WNMX 1305 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 80 mm Overall height: 50 mm Shank diameter (mount): 27 mm Cutting edges: 5 Torx screw: M4x10 Torx key: T15 ECLASS: 21180902 Special features Compatible inserts: WNMX 1305 Compatible insert manufacturer: Korloy Designed for face milling applications Robust mounting for production use FAQ Which inserts fit this face mill head? The face mill head accepts WNMX 1305 indexable inserts; compatibility with Korloy WNMX 1305 grades is part of the specifications for this assembly. How many cutting edges does the tool have? This face mill head is equipped with 5 cutting edges, arranged to provide continuous engagement and steady material removal. What is the mounting diameter for machine attachment? Mounting is via a 27 mm shank, designed for a stable connection to standard tool holders in milling setups. What are the cutter diameter and overall height? The cutter diameter is 80 mm and the overall height is 50 mm, dimensions chosen for balanced stiffness and accessibility. Which fastening hardware is required for inserts? Insert clamping uses an M4x10 screw driven with a Torx T15 key, ensuring secure fastening and quick servicing of the inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant and compatibility with SDMT 1204 inserts for consistent surface quality and reduced downtime. Order the face milling head directly via Metav Werkzeuge or consult our specialists for specification guidance. Face milling head T360-1TM – 80 mm, internal coolant (Teknik Makina) A face milling head for SDMT 1204 indexable inserts, engineered for compact face milling and reliable coolant-fed operation. Precision 80 mm diameter Integrated internal coolant Six cutting edges for smoother cuts Compatible with SDMT 1204 inserts Improved material removal with compact diameter and stable geometry The compact 80 mm diameter body offers a balanced compromise between accessibility and rigidity, enabling effective face milling where space is limited. With six cutting edges and a 45° cutting angle, the tool reduces axial loads while promoting even distribution of cutting forces; this results in steadier engagement, reduced vibration and an improved surface finish. The design is optimised for both light roughing and finishing operations, helping maintain cycle times without sacrificing workpiece quality. Longer tool life and better chip control through internal coolant An integrated internal coolant channel supplies coolant directly to the cutting zone, improving heat dissipation and promoting efficient chip evacuation. This targeted cooling helps extend insert lifetime and lowers the frequency of tool changes, supporting uninterrupted production sequences. Maintenance is straightforward: insert retention uses M4x10 screws secured with a T15 torx key, enabling fast, repeatable insert changes and predictable workshop workflows. Broad compatibility and practical dimensions for workshop workflows Designed for SDMT 1204 indexable inserts and compatible with inserts from ZCC, the head accepts widely available cutting grades and geometries to suit varied materials and surface requirements. The compact overall length of 52 mm and 27 mm arbor diameter make the unit suitable for tooling stations with limited projection where rigidity is essential. Supplied by Teknik Cutting Tools under SKU T360-1TM, the assembly supports flexible tooling strategies and straightforward inventory management. For precision face milling with internal coolant, request product and application advice from Metav Werkzeuge — delivery and technical consultation from Emmerich available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T360-1TM Product type: face milling head Compatible inserts: SDMT 1204 Brand: Teknik Makina Facts Diameter: 80 mm Overall length: 52 mm Weight: 1.049 kg Cutting edges: 6 Cutting angle: 45° Arbor diameter: 27 mm Torx key: T15 Torx screw: M4x10 Internal coolant: Yes eClass: 21181015 Special features Internal coolant channel Compatible with ZCC insert manufacturer For SDMT 1204 indexable inserts Compact design for limited projection FAQ Which inserts fit this head? The face milling head accepts SDMT 1204 indexable inserts; compatibility with ZCC-manufactured inserts is specified for SKU T360-1TM. Is coolant supplied through the body or externally? This model features an integrated internal coolant channel that directs coolant to the cutting edge to improve tool life and chip evacuation. How many cutting edges and what effect does the geometry have? The head uses six cutting edges with a 45° cutting angle, delivering balanced cutting forces and a smoother surface finish during face milling. What fastening and service tools are required? Insert retention uses M4x10 screws tightened with a T15 torx key for quick and reliable insert changes. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust machining performance meets straightforward maintenance: the face milling head combines an 80 mm nominal diameter, internal coolant and compatibility with SNKX 1206 indexable inserts to deliver consistent surface finish and reduced tool-change time. Order directly via Metav Werkzeuge or consult our specialists for precise application guidance. Face milling head for SNKX 1206 indexable inserts — 80 mm, internal coolant (Teknik Makina) The Face milling head is a precision tool body intended for medium‑to‑heavy face milling operations, compatible with SNKX 1206 indexable inserts and optimised for use where chip control and repeatable surface quality are essential. Internal coolant for improved tool life Compatible with SNKX 1206 Korloy inserts 80 mm nominal diameter for versatile milling Seven cutting edges for extended productivity Efficient cooling that reduces downtime and extends insert life The integrated internal coolant channel directs cutting fluid directly to the cutting zone, which significantly improves heat dissipation and chip evacuation. This results in longer insert life and fewer interruptions for tool changes, supporting higher machine utilisation and lower running costs. In practical terms, the targeted coolant flow reduces thermal load on the insert edge and helps maintain dimensional stability during longer cuts. For operations where coolant access is already present, the internal feed is a direct performance upgrade without major setup changes. Compatibility and maintenance that keep production moving Designed specifically for SNKX 1206 indexable inserts and recommended for use with Korloy inserts, the head simplifies logistics and inventory planning. The clamping system uses M4x12.5 Torx screws and a T15 Torx key for secure, repeatable insert retention, enabling quick replacement and minimal downtime. The clear specification facilitates procurement and tool management across multiple machines, while the standardised fastening reduces the risk of incorrect assembly and ensures consistent cutting geometry across shifts. Precision geometry for stable, high‑quality face milling With an 80 mm nominal diameter and a maximum cutting diameter of 93 mm, the cutter body provides a broad cutting envelope suited to face and shallow shoulder milling. The 45° cutting angle offers a balance between cutting force and surface finish, while the configuration of seven cutting edges allows for smooth material removal and even wear distribution. The assembly’s mass (approx. 1.334 kg) contributes to vibration damping for steadier cuts and better surface quality on the workpiece. These attributes combine to deliver dependable performance in repetitive production tasks and occasional heavier passes. For reliable, coolant‑assisted face milling with proven compatibility to SNKX 1206 inserts, contact Metav Werkzeuge to request detailed application advice or to place an order for the Teknik Cutting Tools face milling head SKU T325-1TM Technical data Article number: T325-1TM ECLASS: 21181015 Product type: Face milling head Manufacturer: Teknik Makina Facts Nominal diameter: 80 mm Maximum cutting diameter: 93 mm Overall length: 52 mm Weight: 1.334 kg Number of cutting edges: 7 Cutting angle: 45° Special features Internal coolant: yes Compatible inserts: SNKX 1206 Recommended insert brand: Korloy Torx key: T15 Torx screw: M4x12.5 SKU: T325-1TM FAQ Which indexable inserts fit this milling head? The face milling head accepts SNKX 1206 indexable inserts; Korloy inserts are specified as the compatible brand for reliable seating and performance. Does the tool body provide coolant to the cutting edge? Yes — the head includes internal coolant supply to the cutting zone, improving cooling and chip evacuation during sustained cuts. What are the main dimensions to consider for setup? Nominal diameter is 80 mm, maximum cutting diameter 93 mm, and overall length 52 mm, which should be checked against machine‑tool clearance and fixturing. How many cutting edges are provided and what is the cutting geometry? The tool features seven cutting edges arranged for even wear distribution and a 45° cutting angle to balance cutting forces and surface finish. Which screws and key are required for insert clamping? Insert clamping uses M4x12.5 Torx screws secured with a T15 Torx key to ensure repeatable, secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑performance solution that combines the 80 mm body diameter, internal coolant and compatibility with SNMU 1305 indexable inserts to maintain stable cutting and consistent surface finish. Order the tool directly via Metav Werkzeuge or contact the consultants for an application check. Face milling head for SNMU 1305 indexable inserts — 80 mm, internal coolant (Teknik Makina) A robust face milling head for SNMU 1305 indexable inserts, designed for efficient face milling with through‑coolant delivery and secure Torx fixing for reduced downtime. 80 mm body diameter Internal coolant for improved tool life Compatible with ISCAR SNMU 1305 Seven cutting edges, 45° cutting angle Faster material removal with controlled coolant delivery The milling head is engineered to deliver coolant directly to the cutting zone via internal coolant, which reduces thermal load and helps maintain consistent cutting conditions. With a maximum cutting diameter of 93 mm and an 80 mm body diameter, the tool enables wider passes and stable metal removal rates. This results in improved surface integrity and extended insert life, translating into fewer tool changes and higher productive uptime for milling operations. Secure clamping and predictable cutting geometry for consistent results A 45° cutting angle and seven indexed cutting positions provide a good balance between cutting force distribution and surface finish. Fast, repeatable insert clamping is achieved using M5x12 Torx screws tightened with a T20 Torx key, offering reliable torque transmission and simple maintenance. Compatibility with ISCAR SNMU 1305 inserts ensures access to a broad selection of grades and geometries, enabling optimisation of feed and speed for different workpiece materials. Compact design for workshop integration and straightforward handling With an overall length of 52 mm and a weight of 1.147 kg, the head is compact enough for tight set‑ups while remaining rugged for industrial use. The construction supports quick indexability of inserts and straightforward replacement procedures, reducing non‑productive time during tool changes. The combination of compact form factor, internal coolant and proven insert interface makes this tool a practical choice for shops seeking repeatable face milling performance with established insert systems. Contact Metav Werkzeuge for an application review of the Teknik Makina face milling head or request a compatibility assessment for SNMU 1305 inserts Technical data SKU: T236-1TM Type: Face milling head ECLASS: 21181015 Numbers / Core technical data Body diameter: 80 mm Max cutting diameter: 93 mm Overall length: 52 mm Weight: 1.147 kg Cutting positions: 7 Cutting angle: 45° Special features Internal coolant Compatible with SNMU 1305 indexable inserts Torx screw: M5x12 Torx key: T20 Manufacturer: Teknik Makina FAQ Which insert type fits this milling head? The head accepts SNMU 1305 indexable inserts; compatibility with ISCAR insert geometries is specified for flexible grade and chip‑control selection. Is through‑coolant available and how does it help? Yes — the internal coolant channel supplies coolant to the cutting edge, reducing heat generation and improving insert life and surface finish. What torque and screw type secure the inserts? Inserts are retained with M5x12 Torx screws requiring a T20 Torx key for secure and repeatable clamping. How many cutting positions are provided? The tool offers seven indexed cutting positions, allowing multiple re‑uses of each insert before replacement. Can this head be used in confined setups? The compact overall length of 52 mm and modest weight make the head suitable for constrained fixtures and tight‑clearance milling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from robust build quality, internal coolant and an 80 mm diameter for consistent facing performance; order the cutter head directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head for SNMX 1206 indexable inserts — 80 mm, internal coolant (Teknik Makina) The face milling head is a compact, production-orientated cutter head designed for SNMX 1206 indexable inserts, delivering steady material removal with integrated coolant and easy insert change. 80 mm cutter diameter for broad facing Internal coolant for improved chip evacuation Designed for SNMX 1206 indexable inserts Seven cutting edges for efficient material removal Reduce cycle times with efficient cutting geometry The cutter head is engineered to deliver predictable, repeatable results in facing operations by combining an 80 mm tool diameter with seven cutting edges, which spreads wear and reduces index changes. The use of standard SNMX 1206 indexable inserts means simple stocking of consumables and consistent surface finish. With internal coolant routed directly to the cutting zone, heat is managed at source, helping to maintain cutting-edge life and stabilise machining performance under continuous production loads. Quick serviceability for uninterrupted production Maintenance and insert replacement are designed for workshop efficiency: the head uses Torx T15 drive engagement and M4x12.5 screws for secure clamping and fast changeover. The compact 50 mm overall length and a nominal mass of 1.213 kg contribute to stable runout and predictable balance when mounted on toolholders with a 27 mm interface. These mechanical choices reduce setup time and help keep machining cycles competitive, while the robust connection ensures repeatable seating of inserts. Built for demanding facing operations and reliable supply Compatible with inserts from Korloy and specified insert geometry, the head supports a range of facing tasks where repeatability and coolant-assisted chip control are priorities. As part of a production toolkit, this milling head integrates with established tooling systems and helps reduce unplanned downtime. Metav Werkzeuge’s European distribution and quality-filter approach further ensures dependable availability and straightforward order processing for workshops and industrial buyers. Contact Metav Werkzeuge to reserve the Teknik Cutting Tools face milling head (SKU T345-1TM) for your production line and arrange personalised application guidance from our consultants Technical Data Article number: T345-1TM Manufacturer: Teknik Makina Product type: Face milling head Description: 80 mm face milling head for SNMX 1206 indexable inserts with internal coolant Facts Diameter: 80 mm Overall length: 50 mm Shank diameter: 27 mm Number of cutting edges: 7 Cutting angle: 88° Weight: 1.213 kg Screw: M4x12.5 Torx key: T15 ECLASS: 21181015 Special features Internal coolant Compatible with SNMX 1206 inserts Compatible insert manufacturer: Korloy Designed for indexable insert facing Seven cutting edges for efficient material removal FAQ Which indexable inserts fit this milling head? The face milling head accepts SNMX 1206 indexable inserts and is compatible with inserts from Korloy; the cutter is supplied as SKU T345-1TM by Teknik Cutting Tools. Is coolant delivered through the tool? Yes — the tool features internal coolant, feeding the cutting edges directly to improve chip control and tool life during heavy-facing operations. What mounting and fastening specifications are required? Mounting uses a 27 mm interface; insert clamping is by M4x12.5 screws with Torx T15 drive for reliable retention and quick service. For which applications is this cutter head intended? This cutter head is optimised for facing and similar finishing or semi-finishing operations where controlled chip evacuation and repeatable surface quality are required; see SKU T345-1TM for exact specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable‑insert milling solution that combines high material‑removal capability with secure mounting and straightforward service. The HF53TM’s Ø 80 mm body with 25 insert positions and a shank Ø 32 mm delivers fast cycle times and consistent surface results; order the indexable insert milling cutter HF53TM directly via Metav Werkzeuge or ask our consultants if needed. Indexable insert milling cutter HF53TM — Ø 80 mm, 25 insert positions (Teknik Makina) The HF53TM is an indexable‑insert milling body designed for medium‑ to heavy‑duty face milling and slotting operations, equipped for APKT 1604 inserts and workshop use Ø 80 mm cutter body Fits APKT 1604 indexable inserts 25 insert positions for fast stock removal Shank Ø 32 mm for secure mounting Boost throughput with a high‑capacity insert body This milling body is engineered to increase productivity through its 25 insert positions, enabling larger cutting widths without frequent tool changes. The combination of a compact Ø 80 mm diameter and a substantial 75 mm cutting height permits deeper engagement per pass where machines and fixtures allow, which reduces the number of passes and shortens cycle times. As a rational investment in throughput, the design supports higher metal‑removal rates while keeping setup times low. Simple maintenance and secure fastening to keep production running Maintenance is practical and fast: insert clamping uses Torx M4x10 screws and a T15 key for reliable torque and repeatable seating. The shank Ø 32 mm provides a rigid connection to tool holders and collets, reducing vibration and improving insert life. Minimal downtime for insert changes and the robust fixation system result in a measurable improvement in overall equipment effectiveness (OEE) in day‑to‑day shopfloor operation. Broad compatibility for flexible machining strategies Built to accept APKT 1604 indexable inserts and compatible with Korloy supply lines, the cutter body supports a wide range of grades and chip‑control geometries. This flexibility allows selection of optimised grades for cast iron, steel or aluminium workpieces depending on application needs. The modular approach to cutting geometry makes the tool suitable for one‑piece flow or batch production where different materials are processed under the same setup philosophy. Built for workshop reliability and repeatable results The solid construction and balanced layout—reflected in an overall length of 100 mm and a weight of 2.645 kg—deliver stability during extended runs. Repeatability is supported by precise insert seats and a consistent clamping concept, which translates into reliable surface finish and dimensional conformity across batches. The unit’s compatibility with standard indexable insert formats simplifies stocking and ensures swift replacement when required. For robust, high‑rate milling solutions from Teknik Makina, contact Metav Werkzeuge for tailored advice and assured supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: HF53TM Manufacturer: Teknik Makina Product name: Indexable insert milling cutter HF53TM Facts Diameter: 80 mm Shank diameter: 32 mm Cutting height: 75 mm Overall length: 100 mm Cutting edges / insert positions: 25 Weight: 2.645 kg Special features Accepts APKT 1604 indexable inserts Compatible with Korloy inserts Torx screw M4x10 Torx key size T15 Designed for medium to heavy cutting applications FAQ What type of inserts does this cutter use? The HF53TM is designed for APKT 1604 indexable inserts; Korloy‑compatible grades and geometries are suitable for varied materials. How many insert positions are available and what does that mean for throughput? The body features 25 insert positions, which increases total cutting edge engagement and enables higher material‑removal rates compared with single‑insert cutters. What are the essential dimensions to check for holder compatibility? Key dimensions are a diameter of 80 mm, shank Ø 32 mm and an overall length of 100 mm; these determine fixture and tool‑holder compatibility. Is the clamping hardware standardised? Yes — insert clamping uses Torx M4x10 screws and a T15 key for repeatable and secure fastening of inserts. Which manufacturer produced this tool and what is the SKU? The milling body HF53TM is supplied by Teknik Makina and sold under SKU HF53TM through Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise corner machining, robust Torx clamping and broad compatibility with APKT 1604 inserts for consistent cycle times and low set‑up effort. Order the cutter head directly via Metav Werkzeuge or consult the technical team for application advice. Corner cutter head — Indexable cutter head for APKT 1604, 90° (Teknik Makina) The Corner cutter head is an indexable cutter head engineered for accurate 90° corner machining with APKT 1604 indexable inserts, suitable for standard turning and light milling set‑ups Compatible with APKT 1604 indexable inserts 90° cutting angle for accurate cornering Secure M4x10 Torx fastening with T15 key 27 mm mounting shank diameter Precision corners with reliable geometry and stable repeatability The machining head delivers a controlled cutting geometry thanks to the 90° cutting angle and a rigid body that limits deflection under intermittent loads. Using APKT 1604 indexable inserts provides a predictable chip flow and simplifies tool inventory management, while the six cutting positions contribute to extended tool life. The design reduces set‑up time and supports repeatable corner quality, which aids throughput optimisation on batch runs and short production series. Bold material choices and a compact profile keep the effective cutting zone close to the spindle, improving process stability in typical workshop environments. Fast, secure insert clamping for reduced downtime A straightforward clamping arrangement with M4x10 Torx screws and a T15 key ensures quick insert changes and consistent seat contact, lowering the risk of chatter caused by loose fittings. The holder accepts inserts from Korloy and other manufacturers conforming to the APKT 1604 form, making it easy to integrate into existing toolsets. The torqueable Torx fixing provides repeatable preload across cycles, which supports consistent cutting conditions and reduces the need for frequent re‑checks. These features support higher machine utilisation and fewer interruptions for maintenance. Compact mounting with industrial compatibility The tool is engineered around a 27 mm mounting shank, offering a compact footprint while keeping sufficient mass for vibration damping. With an external diameter of Ø 80 mm and a total length of 52 mm, the head is suited to tight set‑ups where proximity to the workpiece matters. The unit weight of 1.159 kg contributes to stable rotational balance without excessive spindle load. Such dimensional data are useful when planning tool offsets, clearance envelopes and collision checks in CAM programming, enabling safer and more reliable NC routines. Practical workshop details that matter in daily use Six effective cutting edges and compatibility with standard insert geometries reduce tooling costs through longer insert rotation and simplified stocking. The robust construction and standard fastening parts mean spare parts are easy to source and replacement is straightforward. The head’s dimensions and mounting arrangement support quick verification with common workshop gauges, while the proven clamping method minimises the influence of operator variance on process outcomes. For procurement and planning, the modular nature of the holder supports staged upgrades without wholesale changes to holders or inserts. For application-specific recommendations or to secure the Teknik Cutting Tools indexable cutter head (SKU T186TM) contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: T186TM Manufacturer: Teknik Makina Mounting diameter: 27 mm External diameter: 80 mm Total length: 52 mm Weight: 1.159 kg Cutting angle: 90° Number of cutting edges: 6 Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 FAQ What insert type fits this cutter head? The head accepts APKT 1604 indexable inserts; Korloy APKT 1604 inserts are specified as compatible and standard APKT 1604 geometries will seat correctly. Which mounting shank diameter is required? A 27 mm mounting shank is provided for machine attachment and must match the toolholder or adapter in use for proper installation. How is the insert secured in the head? Inserts are clamped using M4x10 Torx screws tightened with a T15 key, ensuring consistent preload and fast changeover. Is the cutter head suitable for high‑speed applications? The head’s compact geometry and secure clamping support stable performance; final suitability depends on spindle dynamics and selected insert grade. What are the main dimensions to check for NC programming? Key dimensions include Ø 80 mm external diameter, 52 mm total length and the 27 mm mounting diameter for clearance and collision planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 27 mm shank and a true 90° cutting angle to secure repeatable corner cuts, while compatibility with APMT 1604 indexable inserts keeps tooling costs manageable; order directly via Metav Werkzeuge or consult our specialists for application support. Corner turning head T247TM — 90° cutting angle, 27 mm shank by Teknik Makina Corner turning head T247TM is a compact toolholder engineered for external turning with APMT 1604 indexable inserts, designed to deliver repeatable corner geometries in CNC turning and finishing operations. 90° cutting angle for precise corner cuts 27 mm shank for rigid machine mounting Compatible with APMT 1604 indexable inserts Torx M4x10 fixing screw with T15 key included Delivering repeatable corner cuts through rigid mounting The Teknik Makina corner head is built around a 27 mm shank to provide rigid mounting and reduced deflection during cutting. The defined 90° cutting angle assures consistent corner profiles and simplifies programming by aligning the insert geometry with common toolpath strategies. For workshops focused on tight tolerances, the combination of shank stiffness and a precise cutting geometry reduces part variation and rework, supporting higher first-pass yields. Faster insert changes and straightforward maintenance Designed for quick servicing, the head accepts standard APMT 1604 indexable inserts and secures them with a Torx M4x10 fixing screw operated by a T15 key. Indexable inserts mean tool bodies remain in service while only the small carbide inserts are replaced, lowering consumable costs and minimising downtime. Compatibility with Korloy-type inserts expands sourcing options and keeps inventory simple for production environments. Space-efficient design for versatile machine setups With an outer diameter of 80 mm and an overall length of 52 mm, this compact toolhead fits into restricted tool stations without sacrificing performance. The unit’s mass (approx. 1.249 kg) contributes to stability during operation, while the modest envelope supports close-proximity tooling and multi-tool turrets. The design helps maintain a tidy toolroom stock and supports flexible machine layouts for mixed-production shops. Contact Metav Werkzeuge to discuss workshop compatibility for the Teknik Makina corner turning head T247TM, request a tailored quotation or check stock availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T247TM Manufacturer: Teknik Makina Product name: Corner turning head for APMT 1604 indexable inserts Facts Shank diameter: 27 mm Diameter: 80 mm Overall length: 52 mm Weight: 1.249 kg Cutting angle: 90° Number of cutting edges: 7 Special features Compatible inserts: APMT 1604 Compatible inserts manufacturer: Korloy Fixing screw: Torx M4x10 Tool key: T15 FAQ What inserts fit this toolhead? The corner turning head accepts APMT 1604 indexable inserts; Korloy-format inserts are compatible with this holder. Which shank diameter is required for mounting? Mounting requires a machine tool spindle or turret capable of accepting a 27 mm shank, ensuring rigid support for stable cutting. What is the cutting geometry of the head? The head provides a 90° cutting angle, designed for accurate corner and shoulder turning operations. How is the insert secured and replaced? Inserts are secured with a Torx M4x10 fixing screw; replacement is done with a T15 key for quick, reliable changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com