Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of precise insert compatibility, internal coolant and compact design for stable machining and reduced setup time; order this unit directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Boring bar KA502TM — 13 mm with internal coolant for CCMT 0602 (Teknik Makina) Boring bar KA502TM for secure mounting of CCMT 0602 indexable inserts, designed for precision boring in confined diameters and demanding production environments. For CCMT 0602 indexable inserts 13 mm diameter for precision boring Internal coolant for targeted cooling Right-hand cutting, 95° cutting angle Precise insert compatibility for consistent production results The tool is optimised for industry-standard CCMT 0602 indexable inserts, enabling rapid reconditioning and low tooling costs through widely available inserts. With a 13 mm cutting diameter and a 12 mm shank, the bar delivers concentric accuracy in small-bore operations while keeping runout and vibration low. The 95° cutting angle and right-hand cut direction provide predictable chip flow and tool engagement, which supports repeatable turning and boring cycles on compact CNC lathes. Internal coolant and chip control that extend tool life Built-in internal coolant supplies coolant directly to the cutting zone, reducing thermal load on the insert and improving chip evacuation from the bore. This directed cooling stabilises cutting temperatures and helps maintain insert edge life, particularly in continuous or high-feed applications. The result is fewer unscheduled tool changes and improved component surface finish, which together raise overall process efficiency in small-part production. Compact fastening and dimensions for tight setups The compact overall length of 125 mm and low mass (approx. 0.098 kg) suit machining in restricted chuck-overhangs and multi-spindle configurations. Assembly uses a TORX T8 key with an M2.5x5.5 fastening screw, ensuring robust clamp force and straightforward maintenance. The small footprint and lightweight construction contribute to stable toolholding, minimising deflection where precision is essential. Workshop integration and material versatility This bar integrates easily into existing tooling inventories thanks to its standard insert compatibility and compact geometry. The combination of a standard insert form factor and internal coolant makes the component suitable for a wide range of workshop tasks that demand repeatability and quick turnaround times. For identification and reordering, the item is listed under SKU KA502TM, and the robust design supports efficient stock management and predictable production planning. For reliable machining results with Teknik Makina's KA502TM boring bar, contact Metav Werkzeuge for ordering and tailored technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: KA502TM ISO designation: A10-12K Product type: Boring bar Manufacturer: Teknik Makina Facts Cutting diameter: 13 mm Shank diameter: 12 mm Overall length: 125 mm Cutting-edge height: 32 mm Weight: 0.098 kg Cutting angle: 95° Cutting direction: right Fastening: TORX T8, screw M2.5x5.5 Special features Internal coolant For CCMT 0602 indexable inserts Compact design for confined bores Lightweight construction Standardised TORX fastening FAQ Which inserts are compatible with this tool? The KA502TM boring bar is designed for CCMT 0602 indexable inserts, allowing the use of standard insert geometries for quick replacement and cost-effective stocking. Does the tool provide internal cooling? Yes — the bar features internal coolant, which directs coolant to the cutting zone to improve chip evacuation and increase insert life. What are the main dimensional specifications? Key dimensions: 13 mm cutting diameter, 12 mm shank diameter and 125 mm overall length; the cutting-edge height is 32 mm. Which cutting direction and angle does the tool have? The bar is configured for right-hand cutting with a 95° cutting angle, suited to conventional turning and boring setups. What fastening hardware is required? Assembly uses a TORX T8 key and an M2.5x5.5 fastening screw for secure insert clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of solid carbide construction, internal coolant, and precise compatibility with DCMT 0702 inserts for reliable chip control and consistent machining results; order the tool directly via Metav Werkzeuge or contact the technical team for specification guidance. Drill Bar SDQC with Coolant (E10K SDQCL 07) — Solid carbide, internal coolant — Teknik Makina A Drill Bar SDQC with Coolant designed for left-hand cutting operations and internal coolant supply, intended for use with DCMT 0702 indexable inserts in precision turning and grooving applications Internal coolant for reliable chip evacuation Solid carbide construction for high rigidity Compatible with DCMT 0702 indexable inserts 13 mm diameter, 125 mm overall length High rigidity and stable cutting for repeatable results The bar is manufactured from solid carbide, providing a stiff, vibration-resistant tool body that supports consistent tool geometry under load. With a 13 mm diameter and 125 mm overall length, the design minimises deflection during interrupted cuts and heavy engagement. The result is improved dimensional accuracy and longer insert life, which reduces downtime and the frequency of tool changes. The 10 mm shank ensures secure clamping in standard toolholders, maintaining concentricity and surface finish. Integrated coolant for cleaner chips and longer insert life An internal coolant channel delivers cutting fluid directly to the cutting edge, promoting efficient cooling and chip evacuation. Direct coolant feed reduces heat build-up at the contact zone, which helps maintain edge integrity on the insert and reduces thermal wear. For workshops that require stable thermal conditions and predictable insert performance, the coolant-fed design supports higher feed rates and more consistent surface quality without complex external routing. Flexible compatibility and simple insert handling Configured for DCMT 0702 indexable inserts and identified as E10K SDQCL 07, the holder accepts commonly available carbide turning grades, enabling rapid tool changes and easy inventory management. Insert clamping uses a Torx T8 key and an M2.5x5.5 screw, permitting straightforward replacement and secure fixation. The left-hand cutting orientation makes the bar suitable for operations where reverse rotation or specific approach angles are required, adding flexibility to turning and grooving setups. Workshop practicality and operational benefits Weighing approximately 0.05 kg and with a cutting height of 7 mm, the tool is compact yet engineered for practical everyday use in production environments. The combination of internal coolant and solid construction reduces reliance on secondary chip-control measures and simplifies process planning. The ISO designation and standard insert format allow integration into existing tooling systems, making the holder a pragmatic choice for shops seeking a durable, coolant-fed indexable solution from a recognised manufacturer For coolant-fed left-hand turning and grooving tasks, choose the Teknik Makina E10K SDQCL 07 — order through Metav Werkzeuge or request technical clarification from Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: KE60TM Manufacturer: Teknik Makina ISO designation: E10K SDQCL 07 Core dimensions Diameter: 13 mm Overall length: 125 mm Shank diameter: 10 mm Cutting height: 7 mm Weight: 0.05 kg Materials & features Material: Solid carbide Internal coolant: yes Compatible inserts: DCMT 0702 Cutting direction: left Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this holder? The holder is designed for DCMT 0702 indexable inserts, allowing standard insert sizes and grades to be used with the Teknik Makina E10K SDQCL 07. Is the coolant delivered through the tool body? Yes, the internal coolant channel supplies fluid directly to the cutting zone, improving cooling and chip evacuation for the Teknik Makina drill bar. What is the ISO designation for this tool? The ISO designation is E10K SDQCL 07, shown on the product documentation and useful for matching holders to machine setups. Which key and screw are required for insert clamping? Insert retention uses a Torx T8 key and an M2.5x5.5 screw for secure and repeatable clamping of inserts in the Teknik Makina bar. What is the overall size and shank diameter? The tool has a 13 mm diameter, 125 mm overall length and a 10 mm shank, suitable for common toolholders and compact setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable compatibility with LNMU 0202 indexable inserts and internal coolant delivers consistent chip control and extended insert life; the combination of a 13 mm cutter diameter and a 12 mm shank ensures stiffness for accurate cuts. Order the S707TM shank milling cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Shank milling cutter S707TM — 13 mm cutter, internal coolant (Teknik Makina) S707TM is a shank milling cutter designed for use with LNMU 0202 indexable inserts, offering internal coolant and a compact, rigid geometry for reliable, repeatable milling operations. Internal coolant for stable chip evacuation Compatible with LNMU 0202 indexable inserts 13 mm cutter diameter, 12 mm shank Torx T6 screw M1.8x4.1 for secure clamping Consistent indexable-insert performance for productive milling The S707TM provides a solution where indexable-insert milling must combine flexibility and repeatability. Built for the LNMU 0202 insert family, the cutter supports inserts from Tungaloy, enabling straightforward inventory management and rapid insert replacement. The presence of internal coolant directs cutting fluid close to the cutting zone, improving chip evacuation and reducing heat build-up; this leads to longer insert life and more stable cycle times. For production environments that prioritise process reliability, this geometry reduces unplanned interruptions and supports efficient throughput. Rigid shank and compact dimensions for accurate results A 12 mm shank paired with a 13 mm cutter diameter and a 140 mm overall length provides a balance between reach and rigidity. The 30 mm cutting length maintains a short projection to limit deflection, supporting consistent surface finish and dimensional control in milling operations. The modest mass (approx. 0.201 kg) contributes to lower inertia while maintaining sufficient stiffness for moderate-depth passes. This combination of dimensions is particularly suitable where toolholder runout and clamping precision directly influence final part tolerances. Secure fastening and simplified maintenance Fastening uses a Torx T6 drive and an M1.8x4.1 screw for reliable clamping of the indexable inserts. The two cutting-edge configuration facilitates efficient material removal with balanced cutting forces while keeping insert-change procedures straightforward. Maintenance cycles are shortened by the easy access to the fastener and the standardised insert type; as a result, downtime for tooling changes is reduced and repeatability of clamping torque is improved, which supports stable process parameters across shifts. Practical fit and where the cutter adds value This shank milling cutter is intended for CNC milling applications that require the flexibility of indexable inserts and the process benefits of internal coolant. Typical uses include light to medium milling operations where the LNMU 0202 insert geometry is preferred for economical machining and rapid index changes. Backed by Teknik Makina production and wholesalers such as Metav Werkzeuge, the tool is positioned to support workshops and industrial users seeking robust, easily serviceable tooling with dependable manufacturer provenance and supply-chain continuity. For application guidance, stocking options or to arrange supply of the Teknik Makina S707TM shank milling cutter, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S707TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: LNMU 0202 Compatible insert brand: Tungaloy Core dimensions Cutter diameter: 13 mm Shank diameter: 12 mm Overall length: 140 mm Cutting length: 30 mm Cutting edges: 2 Weight: 0.201 kg Special features Internal coolant Torx key: T6 Torx screw: M1.8x4.1 ECLASS: 21180806 Label: 13 mm shank cutter for LNMU 0202, L 140 mm FAQ Is internal coolant integrated in the cutter? Yes. The cutter features internal coolant to supply fluid directly to the cutting zone, improving chip control and thermal stability for the S707TM shank milling cutter. Which inserts fit this tool? The tool accepts LNMU 0202 indexable inserts; the configuration is compatible with inserts from Tungaloy for standardised replacement and simplified stocking. What shank diameter and holder are required? The tool uses a 12 mm shank; a matching 12 mm collet or holder with adequate clamping accuracy is required to maintain the cutter’s designed stiffness. How many cutting edges does the cutter have and what is the benefit? The cutter has 2 cutting edges, providing balanced cutting forces and enabling efficient material removal while keeping insert costs down through easy indexing. What are the overall and cutting lengths? Overall length is 140 mm and the cutting length (shaft cutting length) is 30 mm, offering a compact projection that minimises deflection for improved dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-based solution that combines precise indexing with Taegutec SPMG 0502 inserts and a rigid 14 mm shank for stable milling; order directly via Metav Werkzeuge or consult the team for tailored tooling advice. Shaft milling cutter S810TM – for SPMG 0502-0904 indexable inserts, 13 mm cutting diameter (Teknik Makina) The Shaft milling cutter S810TM is an insert-mounted milling cutter designed for efficient slotting and light face milling using SPMG 0502-0904 indexable inserts; ideal where rapid insert changes and tool reconditioning reduce production downtime. Compatible with Taegutec SPMG 0502 inserts 13 mm effective cutting diameter 14 mm shank with 120 mm overall length Torx M2x4.2 screw, T6 key Increased process efficiency through insert technology Using indexable inserts reduces tooling costs and minimises downtime when cutting edges are renewed. The modular concept of this insert-mounted cutter supports the economical exchange of worn inserts such as SPMG 0502, which shortens machine idle time and keeps tool inventory efficient. The modular design also simplifies maintenance routines; replacing an insert takes moments compared with regrinding solid tools, making the system particularly attractive for repeat production and mixed-batch workflows. Rigidity and reach for precise machining A 14 mm shank paired with a 13 mm cutting diameter gives a balance of stiffness and accessibility for confined workspaces. The 40 mm cutting length and 120 mm overall length permit deeper cuts while maintaining stability. With 2 cutting edges, the cutter offers predictable chip formation and reliable surface finishes in intermittent milling. The combination of shank dimension and limited overhang helps reduce vibration and supports consistent tolerances across serial parts, which is essential in a production environment seeking repeatable accuracy. Secure clamping and straightforward servicing Insert retention is handled via a Torx M2x4.2 screw and requires a T6 key for installation and removal. This standardised fastening ensures secure clamping and low runout, contributing to cutting accuracy and longer insert life. The simple screw-and-seat arrangement also facilitates quick on-bench servicing: worn inserts are swapped without special fixtures, so set-up times are reduced and machine availability is improved. Practical handling and workshop integration At just 0.147 kg, the tool is light to handle yet sufficiently robust for toolholder engagement, supporting rapid changeover routines. The cutter’s compatibility with Taegutec SPMG 0502 inserts means procurement and stocking strategies can be streamlined, leveraging common insert families across several tool types. For questions about fitment, recommended speeds or holder selection, the Metav team can provide guidance to match cutter geometry with specific machining tasks and machine capabilities. Contact Metav Werkzeuge for stock availability and personalised tool recommendations for Teknik Makina tooling – call +49 2822 7131930 or email info@metav-werkzeuge.com for expert advice and fast delivery. Technical Data Article number: S810TM Manufacturer: Teknik Cutting Tools Compatible inserts: SPMG 0502-0904 indexable inserts Compatible insert brand: Taegutec SKU: S810TM Facts Shank diameter: 14 mm Cutting diameter: 13 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 2 Weight: 0.147 kg Special features Torx screw: M2x4.2 Torx key: T6 Insert system: SPMG 0502 series Designed for quick insert changes and economical edge renewal FAQ Which inserts fit this cutter? The Shaft milling cutter S810TM is designed for SPMG 0502-0904 indexable inserts and is compatible with Taegutec SPMG 0502 series inserts. How is the insert secured in place? Insert retention is by a Torx M2x4.2 screw; use a T6 key to tighten or remove the screw, assuring secure clamping and low runout. What are the key dimensions to check for toolholder compatibility? Check the 14 mm shank diameter and the 120 mm overall length; the 14 mm shank is the primary datum for choosing the correct holder. Is this cutter suitable for deep slotting operations? The cutter’s 40 mm cutting length and rigid shank support moderate depth milling and slotting; consider machining parameters and machine rigidity for deeper cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Data conflict detected for SKU KE50TM: the field 'fur_wendeplatten' specifies DCMT 0702, while the product title and description reference DCMT 11T3. These specifications are inconsistent and must be verified before a product description can be produced. Please confirm the correct insert designation to ensure accuracy and consistency in the product listing, as discrepancies like this can lead to confusion for customers and potential errors in inventory management or order fulfilment. It is essential to address this issue promptly by cross-referencing the provided data with the manufacturer's specifications or consulting relevant documentation to determine the accurate and intended insert designation for this SKU.

Take advantage of the combination of solid carbide rigidity, internal coolant, and compact dimensions for reliable boring performance and reduced setup time; order the tool directly via Metav Werkzeuge or request advice from the consultants at Metav Werkzeuge if further specifications are required E10K SDUCR 07 SDUC drill bar with internal coolant by Teknik Makina A E10K SDUCR 07 SDUC with Coolant drill bar engineered for precision boring where internal coolant delivery and high rigidity are required Internal coolant for improved chip control Solid carbide construction for rigidity Shank Ø 10 mm, overall length 125 mm Right-hand cutting direction for standard setups Consistent bore quality through rigid, monolithic design The monolithic solid carbide construction ensures high stiffness and minimal deflection during machining, which directly benefits bore accuracy and surface finish. The ISO designation E10K SDUCR 07 denotes the SDUC-style boring geometry, allowing predictable behaviour in interrupted and continuous cuts. Reduced vibration leads to longer insert life and fewer scrap parts, delivering a measurable improvement in machining consistency and process yield. Coolant-through routing that improves tool life and finish The internal coolant channel supplies cutting fluid close to the cutting edge, improving chip control and heat dissipation at the cutting zone. This targeted delivery reduces built-up edge and thermal deformation of the insert, so cycle times remain stable and rework is minimised. For applications where coolant reaches the insert pocket, the result is a cleaner bore and reduced need for secondary finishing—an operational advantage in batch production and precision turning tasks. Compact dimensions for flexible workshop integration With a shank Ø 10 mm and 125 mm overall length, this boring bar is suitable for compact toolholders and jobs where space around the spindle is limited. The tool body diameter of 13 mm and a cutting height of 7 mm balance reach and rigidity, while the low mass (0.05 kg) reduces centrifugal effects at higher spindle speeds. The right-hand cutting configuration matches common lathe setups, facilitating straightforward integration into existing tool setups without adaptation. Practical clamping and maintenance features for minimal downtime Insert retention is managed with a Torx fastener and an accessible pocket design to simplify changes: the supplied tightening specification uses a T8 Torx key with an M2.5x5.5 screw. This standardised approach supports quick insert swaps and reduces maintenance intervals. The SDUC form factor is compatible with indexable insert systems designed for small triangular cutters; match the insert seat to the ISO designation for correct installation. Routine servicing remains straightforward thanks to the accessible fastener layout and solid construction. Contact Metav Werkzeuge today for application advice and to secure the E10K SDUCR 07 SDUC drill bar (SKU KE30TM) from stock in Emmerich; technical drawings and further data are available on request Technical data Article number: KE30TM Manufacturer: Teknik Makina Material: Solid carbide ISO designation: E10K SDUCR 07 Internal coolant: Yes Data Diameter: 13 mm Shank diameter: 10 mm Overall length: 125 mm Cutting height: 7 mm Weight: 0.05 kg Cutting direction: Right eClass: 21180806 Special features SDUC design with coolant-through capability Suitable for indexable inserts (SDUC-style holders) Torx key: T8 Clamping screw: M2.5x5.5 Compact, monolithic carbide body FAQ What are the primary dimensions of the KE30TM? The KE30TM has a body diameter of 13 mm, a shank Ø 10 mm, an overall length of 125 mm, a cutting height of 7 mm and a mass of 0.05 kg. How is coolant supplied to the cutting zone? Coolant is delivered through the bar via the internal coolant channel, providing near-edge fluid supply to aid chip evacuation and temperature control at the insert interface. Which insert and holder form does this boring bar use? The E10K SDUCR 07 is an SDUC-style boring bar designed for compatible indexable inserts; verify insert seat and ISO matching when selecting inserts for the KE30TM. What fastener and key are required for insert clamping? Insert clamping for this tool uses an M2.5x5.5 screw tightened with a T8 Torx key for secure and repeatable retention. Is the KE30TM suitable for standard right-hand turning operations? Yes, the tool is configured for a right-hand cutting direction, matching standard lathe setups and ensuring typical chip flow and tool orientation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact design with internal coolant and compatibility for LNMU 0202 indexable inserts ensure stable chip evacuation and predictable tool life; the 12 mm shank and 13 mm cutter diameter allow integration into compact toolholders. Order the shank milling cutter directly via Metav Werkzeuge or consult our specialists for application matching. Shank milling cutter S706TM for LNMU 0202 indexable inserts — 13 mm, internal coolant (Teknik Makina) S706TM is a shank milling cutter engineered for light to medium-duty face and slot milling using LNMU 0202 indexable inserts, designed for coolant-through operation and compact toolholder systems. Internal coolant for improved chip evacuation Compatible with LNMU 0202 indexable inserts 12 mm shank for common compact toolholders Two cutting edges for balanced cutting performance Stable cutting and longer tool life through directed coolant The cutter’s internal coolant supply directs cutting fluid straight to the cutting zone, reducing heat and improving chip control during interrupted cuts. This targeted coolant flow helps maintain edge integrity of the LNMU 0202 indexable inserts and reduces the frequency of insert changes, which in turn supports steady production cycles. The tool’s construction prioritises dimensional stability under load, delivering consistent machining results and fewer unplanned stoppages. Seamless integration with existing tool systems With a 12 mm shank and a 13 mm body diameter, the tool is made for straightforward mounting in compact collets and holders common in small-slot and finishing operations. The two cutting edges ensure a balanced cut, lowering vibration and optimising surface finish while keeping spindle load moderate. Compatibility with Tungaloy-compatible inserts simplifies logistics for workshops already standardised on these inserts, reducing toolholder and inventory complexity. Practical design for predictable performance and handling Finished components benefit from the cutter’s controlled engagement geometry and 30 mm cutting length, which is adequate for many slotting and face-milling tasks without overextending the tool overhang. The Torx fastener arrangement (M1.8×4.1 with a T6 key) provides secure clamping for the inserts while allowing quick replacements. Overall, the design supports reliable cycle times and repeatable part quality, making it a pragmatic choice for manufacturing environments that value uptime and straightforward tooling management. For procurement or technical clarifications about the Teknik Makina shank milling cutter S706TM, contact Metav Werkzeuge for application advice and fast supply from Emmerich: eMail info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: S706TM Manufacturer: Teknik Makina Diameter: 13 mm Overall length: 100 mm Shank diameter: 12 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.192 kg Internal coolant For LNMU 0202 indexable inserts Compatible with Tungaloy inserts Torx screw M1.8×4.1 Torx key T6 FAQ Which indexable inserts fit this cutter? The S706TM is specified for LNMU 0202 indexable inserts and is compatible with inserts from Tungaloy; insert geometry must match LNMU 0202 specifications. Is the coolant routed through the cutter body? Yes, the cutter features internal coolant for direct delivery of cutting fluid to the cutting edge, improving chip evacuation and thermal control. What shank diameter is required for mounting? The tool has a 12 mm shank, suitable for compact toolholders designed for that shank size. How many cutting edges does the cutter have? The cutter uses two cutting edges, which provide a balanced cut and reduced vibration for better surface finish. Which fastener and key are used for the inserts? Inserts are secured with a Torx screw M1.8×4.1 and require a T6 Torx key for replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise dimensions and secure clamping to maintain consistent milling results; the M8 thread and 13 mm nominal diameter deliver predictable seating and reliable torque transfer. Order the part directly via Metav Werkzeuge or consult the technical team for fitment details and supply options. Screw TC184TM — M8 thread, 13 mm diameter (Teknik Makina) A robust Screw TC184TM designed for fastening end mills in cutter holders, providing repeatable seating and compatibility with a 4 mm Allen key. M8 thread for secure clamping 13 mm nominal diameter Compatible with 4 mm Allen key Consistent clamping for stable machining The screw’s M8 thread is engineered to provide even clamping force across the tool holder, which supports stable cutting performance and reduces the risk of tool movement under load. In production environments where repeatability matters, a secure threaded connection minimises micro-movement that can lead to premature wear or inconsistent surface finish. The design concentrates on mechanical reliability rather than decorative elements, delivering a straightforward, functional connection that integrates with standard milling setups. Predictable dimensions for accurate setup Defined measurements such as the 13 mm nominal diameter and 25 mm total length enable predictable assembly and straightforward machine setup. These dimensions support precise alignment of the cutting tool within the holder, so runout can be kept to a minimum and concentricity maintained. Compatibility with standard clamping tools is confirmed by the requirement for a 4 mm Allen key, which simplifies tightening procedures and reduces setup time. The clear specification of size assists process engineers and workshop planners in standardising tool stacks and spare-part inventories. Practical workshop benefits and application scope Specified as suitable for use with end mills, this fastening component supports routine tool changes and maintenance cycles within milling operations. The compact form factor and defined thread size make it appropriate for both small-batch workshops and larger production lines that require dependable fastenings. When incorporated into a tool management system, the screw contributes to predictable maintenance intervals and fewer unexpected stoppages, supporting overall equipment effectiveness and continuity of machining processes. Contact Metav Werkzeuge for technical clarification or to request delivery options for the Teknik Makina M8 fastening screw; call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised assistance. Technical data Article number: TC184TM Manufacturer: Teknik Makina Facts Diameter: 13 mm Thread: M8 Total length: 25 mm Weight: 0.1 kg Special features Application: for End Mill Drive: compatible with 4 mm Allen key SKU: TC184TM FAQ What is the thread size of the screw? The screw TC184TM is supplied with an M8 threaded connection for secure clamping in cutter holders. Which drive tool is required for installation? Assembly requires a 4 mm Allen key, which is compatible with the internal drive of the Teknik Makina screw. What dimensions should be expected for planning? Key dimensions are a 13 mm nominal diameter and a total length of 25 mm, as stated for the TC184TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient machining performance is achieved by combining solid carbide rigidity with internal coolant for consistent chip control; the compact 13 mm design and 10 mm shank reduce vibration and simplify integration. Order via Metav Werkzeuge or consult their application specialists for insertion and setup recommendations. Boring bar SDUC with Coolant (E10K SDUCL 07) — Solid carbide, 13 mm, left-hand (Teknik Makina) A Boring bar SDUC with Coolant engineered for precision internal coolant delivery and reliable compatibility with DCMT 0702 indexable inserts in turning and internal boring operations. Internal coolant supply Solid carbide construction For DCMT 0702 indexable inserts 13 mm diameter, 10 mm shank Maximised rigidity for stable internal machining The combination of solid carbide construction and a compact 13 mm body delivers rigidity where it matters, limiting deflection during finish passes. A reduced shank diameter of 10 mm keeps the tool compatible with small-holder systems while preserving stiffness across the effective length. The cutting height 7 mm is optimised for DCMT 0702 inserts, providing a stable insert seat and consistent cutting geometry, which leads to repeatable tolerances and fewer reworks in series production. Internal coolant for improved chip control and tool life Built-in internal coolant directs lubricant and coolant precisely to the cutting zone, aiding chip evacuation and local cooling at the tool–workpiece interface. This improves surface finish and reduces thermal wear on the cutting edge, extending service intervals. When machining tighter bores or long overhangs, the coolant supply helps maintain process stability and lowers the risk of built-up edge or work hardening that would otherwise compromise component quality. Fast fitting and predictable orientation to reduce setup time Compatibility with DCMT 0702 indexable inserts and the standardised clamping configuration speed up tool changes. The tool uses a Torx T8 key and M2.5x5.5 screw for secure insert retention, ensuring repeatable seating after each change. The left-hand cutting direction is clearly defined, enabling correct holder selection at the machine. The ISO designation E10K SDUCL 07 simplifies ordering and fixture planning, and the overall length of 125 mm balances reach with vibration control for common internal machining tasks. Discuss application requirements with Metav Werkzeuge to confirm insert grade and coolant pressure parameters for the KE40TM boring bar from Teknik Cutting Tools — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KE40TM Manufacturer: Teknik Makina Product name: Boring bar SDUC with Coolant ISO designation: E10K SDUCL 07 Core data Diameter: 13 mm Overall length: 125 mm Shank diameter: 10 mm Cutting height: 7 mm Weight: 0.05 kg Features & compatibility Material: Solid carbide Internal coolant: yes Compatible inserts: DCMT 0702 Cutting direction: left Torx key: T8 Torx screw: M2.5x5.5 FAQ How does the internal coolant improve machining with this boring bar? The internal coolant in the KE40TM boring bar from Teknik Cutting Tools supplies lubricant directly to the cutting edge, improving chip evacuation and cooling the insert area to reduce wear and support consistent surface finish. Which inserts are recommended for this tool? Compatibility is specified for DCMT 0702 indexable inserts; using the correct insert size and grade matched to material and speed ensures the KE40TM delivers expected tool life and dimensional stability. What holder size is required for mounting this boring bar? The tool has a 10 mm shank diameter; select a holder that accepts a 10 mm shank and accommodates the ISO designation E10K SDUCL 07 for correct seating and clamping. Is the cutting direction suitable for standard turning setups? Yes, the component is designed for left-hand cutting direction; confirm holder orientation in the machine setup to match the intended feed and workpiece rotation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 13 mm cutting diameter, a 20 mm shank and a 39 mm cutting length, this insert drill body delivers precise, repeatable holemaking and stable tool life for indexable-insert operations. Order supply via Metav Werkzeuge or contact their consultants for application-specific recommendations. Insert drill body for Korloy SPMT 0502 – 13 mm diameter, 20 mm shank (Teknik Makina) An insert drill body, Insert drill body for Korloy SPMT 0502, engineered for efficient indexable-insert drilling in demanding machining environments Precision 13 mm cutting diameter 20 mm shank for secure clamping Compatible with Korloy SPMT 0502 inserts Reliable repeatability for accurate holemaking The insert drill body is designed to give consistent hole quality by combining a defined 13 mm diameter with a controlled 39 mm cutting length, reducing variability across production runs. Indexable inserts such as Korloy SPMT 0502 enable fast tool servicing: worn cutting edges are replaced rather than the entire tool, which keeps cycle times steady and simplifies inventory management. This configuration supports stable tolerances in serial production and reduces the need for frequent setup corrections. Secure clamping and reduced vibration for longer tool life A robust 20 mm shank and a 50 mm shank engagement provide firm support in the toolholder, which lowers run-out and suppresses chatter during drilling. The resulting improvement in cutting conditions contributes to long tool life and fewer scrap parts, translating into measurable productivity gains. Where high spindle stability is required, the combination of shank diameter and engagement length enhances process reliability and helps maintain dimensional accuracy over extended runs. Compatibility that simplifies tooling strategy Compatibility with Korloy SPMT 0502 indexable inserts allows quick inserts changes and standardised cutting geometry across different tool bodies, simplifying tool management on the shop floor. The compact overall length of 107 mm and a lightweight construction (0.154 kg) make handling and tool changes efficient without compromising rigidity. Metav Werkzeuge maintains stock and can advise on matching insert grades and clamping systems to align the insert drill body with specific machining strategies. For application-specific advice on implementing the Teknik Makina insert drill body with Korloy SPMT 0502 inserts, contact Metav Werkzeuge for local supply and guidance from Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U004TM Brand: Teknik Makina Compatible inserts: Korloy SPMT 0502 Diameter: 13 mm Shank diameter: 20 mm Cutting length: 39 mm Shank length: 50 mm Overall length: 107 mm Weight: 0.154 kg Core dimensions Diameter: 13 mm Shank diameter: 20 mm Cutting length: 39 mm Shank length: 50 mm Overall length: 107 mm Weight: 0.154 kg Features Compatible with Korloy SPMT 0502 indexable inserts Insert type: SPMT 0502 SKU: U004TM Manufacturer: Teknik Makina FAQ Which insert types fit this drill body? The insert drill body is specified for Korloy SPMT 0502 indexable inserts and is supplied for that insert geometry to ensure correct seating and cutting orientation. What are the critical dimensions to check for holder compatibility? Key dimensions are the 13 mm cutting diameter, 20 mm shank diameter, and 107 mm overall length; these determine holder fit and required projection. How does the shank design affect performance? The 20 mm shank with a 50 mm engagement provides improved clamping stability and helps reduce vibration, which supports consistent cutting conditions and extends insert life. Is this product identified by a specific SKU and brand? Yes, the insert drill body is offered by Teknik Makina and listed under SKU U004TM for straightforward ordering and stock tracking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping, precise cutting length and indexable-insert compatibility for consistent hole quality. Order the tool via Metav Werkzeuge or consult the team for integration into CNC production. Indexable Insert Drill Body U813TM – 13 mm diameter, 20 mm shank (Teknik Makina) A robust indexable insert drill body Indexable Insert Drill Body U813TM engineered for precision drilling with SPMG 0502 inserts in metalworking and CNC environments. 13 mm cutting diameter for precision drilling 39 mm cutting length for deeper holes 20 mm shank diameter for rigid clamping Compatible with SPMG 0502 inserts (Taegutec, YG-1) Stable clamping for repeatable hole quality The solid tool body is designed around a 20 mm shank to deliver increased rigidity during operation. This reduced deflection helps maintain concentricity and lowers the risk of chatter, which in turn supports repeatable hole diameters and improved surface finish. The combination of short, focused cutting length (39 mm) and a compact overall length of 107 mm results in a stable machining setup that is easier to hold within standard toolholders, reducing setup time and the need for frequent rework. For production settings where consistency is critical, the tool body promotes reliable process capability through mechanical stability. Designed for indexable inserts to cut downtime Compatibility with SPMG 0502 indexable inserts and major insert manufacturers such as Taegutec and YG-1 allows rapid cutting-edge replacement without regrinding. The insert-based concept separates wear from the body, enabling quick tool changes and lower spare-part costs compared with solid-carbide solutions. In practice, this means shorter machine downtime and predictable maintenance intervals: worn inserts are exchanged quickly, while the drill body remains in service. The unit weight of 0.164 kg simplifies handling during tool changes and contributes to safe, efficient workshop routines. Practical integration and machining advantages The tool’s geometry balances effective chip removal and access to confined bores by combining a 13 mm diameter with the specified cutting length. The 50 mm uptake length and 20 mm clamping diameter ensure compatibility with common toolholders, supporting seamless integration into existing tool sets. The compatibility and straightforward mounting reduce qualification effort for new operations. Paired with the handling and supply approach from Metav, the drill body suits both small jobbing shops and structured production environments that value predictable performance and uncomplicated logistics. Contact Metav Werkzeuge to discuss the Teknik Makina U813TM indexable drill body for precise, low-downtime drilling in your facility — technical advice and order handling are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: U813TM Brand: Teknik Makina Product: Indexable insert drill body Item name: Vollbohrer (translated) Core technical data Diameter: 13 mm Overall length: 107 mm Cutting length: 39 mm Shank diameter: 20 mm Shank uptake length: 50 mm Weight: 0.164 kg Special features Compatible inserts: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Indexable-insert system for rapid edge changes Compact design for stable clamping and reduced runout FAQ What insert type is required for this drill body? The drill body accepts SPMG 0502 indexable inserts; compatible manufacturers listed include Taegutec and YG-1. What are the key dimensions to check for toolholder compatibility? Confirm the 20 mm shank diameter, the 50 mm uptake length, and the overall length of 107 mm to ensure correct seating in the toolholder. Is this drill body suited for deep-hole applications? With a 39 mm cutting length, the tool body is intended for moderate-depth holes where stability and chip control are priorities rather than extreme deep-hole drilling. How does the insert system affect workshop uptime? Using indexable inserts reduces downtime because worn cutting edges are replaced quickly while the drill body remains in use, improving overall machine availability. Which brand manufactures this product and who handles distribution? The product is supplied by Technik Makina and distributed through Metav Werkzeuge; the SKU is U813TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust rigidity and precise holemaking thanks to the combination of a Ø 13 mm cutting diameter and a 20 mm shank for secure clamping; the replaceable-insert system (SÜMG 0502) provides economical reconditioning and fast tool changes. Order directly via Metav Werkzeuge or consult our technical advisors for insert recommendations and application support. Indexable insert drill body U913TM — Ø 13 mm, 26 mm cutting length, Teknik Makina Indexable insert drill body U913TM for precise holemaking in industrial production, compatible with SÜMG 0502 indexable inserts from Taegutec and YG-1 Compatible with SÜMG 0502 indexable inserts Ø 13 mm cutting diameter 26 mm effective cutting length 20 mm shank diameter for stable clamping Precision and rigidity for repeatable holes The modular design of this indexable-insert drill body delivers consistent diameter control and reduced cycle variation. With a Ø 13 mm cutting diameter combined with an effective cutting length of 26 mm, the component is engineered to hold hole tolerances tightly across repeated operations. The 20 mm shank provides increased stiffness in the chuck or adaptor, lowering deflection and improving surface finish. These attributes make the tool suitable for production environments where repeatability and reduced rework are priorities, and the indexable insert concept reduces downtime because only the insert requires replacement when wear occurs. Cost-effective machining through insert compatibility Instead of replacing entire solid drills, the insert system accepts SÜMG 0502 inserts from Taegutec and YG-1, enabling rapid edge renewal and lower tooling costs per hole. The tool body’s geometry is matched to common insert formats, which simplifies stockkeeping and allows the use of established, high-performance grades. The result is a favourable balance between lifecycle costs and machining performance; production planners will appreciate the predictability of maintenance intervals and the simplified logistics that arise from standardised insert families. Practical dimensions and workshop advantages Compact overall dimensions — 94 mm overall length and a shank length of 50 mm — balance accessibility in confined setups with sufficient reach for typical workpieces. The unit’s light mass (0.145 kg) reduces centrifugal stress at higher spindle speeds and contributes to safer handling during tool changes. Because the cutting edge is provided by reversible inserts, surface finish and hole integrity can be restored rapidly without the need for specialised grinding, improving uptime on the shop floor and maintaining throughput. Contact Metav Werkzeuge for tailored insert selection and application advice for this Teknik Cutting Tools drill body U913TM and arrange procurement or technical consultation directly with their specialists Technical data Article number: U913TM Manufacturer: Teknik Makina Product designation: Vollbohrer (indexable insert drill body) SKU: U913TM Facts Diameter: 13 mm Cutting length: 26 mm Shank diameter: 20 mm Shank length: 50 mm Overall length: 94 mm Weight: 0.145 kg Special features Compatible inserts: SÜMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Indexable-insert system for economical reconditioning Designed for stable clamping and reduced runout FAQ Which insert type fits this drill body? The drill body is designed for SÜMG 0502 indexable inserts; compatible insert manufacturers listed are Taegutec and YG-1. What are the key dimensions for the tool? The tool has a Ø 13 mm cutting diameter, 26 mm cutting length, 20 mm shank diameter, 50 mm shank length and 94 mm overall length. Is the cutting edge included with the drill body? The supplied data specifies compatibility with SÜMG 0502 inserts; the presence of inserts in delivery is not stated and should be confirmed when ordering the U913TM. What advantages does the insert system offer for production? Using SÜMG 0502 inserts reduces downtime for edge changes, lowers lifecycle cost per hole and simplifies spare-part management compared with solid drills. Who manufactures the tool and what is the SKU? The tool is supplied under Teknik Makina and is identified by SKU U913TM Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-performance drill body that pairs 13 mm nominal diameter with a 20 mm shank for reliable clamping and stable holemaking; the construction and 39 mm cutting length help reduce tool changes and keep cycles running smoothly — order via Metav Werkzeuge or request technical advice from our specialists. Indexable Insert Drill Body U300TM — 13 mm diameter, 20 mm shank by Teknik Makina The Indexable Insert Drill Body U300TM is an industrial cutting tool designed for efficient, precision holemaking in CNC machining where insert-based drilling provides quick index changes and consistent geometry 13 mm nominal diameter 20 mm shank for secure clamping Optimised 39 mm cutting length Consistent hole quality through controlled geometry The drill body delivers repeatable performance by combining a precisely machined toolholder with a short, effective cutting section. With a 39 mm cutting length and 111 mm overall length, the geometry is balanced to reduce vibration and maintain concentricity in demanding cycles. For shops focused on tight tolerances, the tested design ensures the insert seat and pocket are maintained within narrow limits so that indexable inserts run true and produce consistent bore finishes. This reduces rework and supports predictable cycle times on CNC lathes and machining centres. Fewer interruptions thanks to quick insert changes Designed for insert-based operation, the tool minimises downtime by allowing rapid replacement of worn cutting edges rather than exchanging whole tools. The combination of a compact cutting zone and accessible clamping screws means insert swaps are carried out fast, improving overall equipment effectiveness. The body’s low mass (approx. 0.157 kg) and 20 mm shank help keep tool inertia low while retaining secure clamping, which contributes to smoother toolpaths and longer periods between interventions. Compatibility with established insert manufacturers simplifies stock management and cost calculations. Robust shank and secure mounting for industrial use A robust mounting interface with a 20 mm shank and a 50 mm shank length provides a stable connection to toolholders, reducing the risk of chatter under moderate feeds and depths. The solid construction supports standard machining parameters and is suitable for integration into existing toolsets where Taegutec and comparable insert systems are used. Measured dimensions and the compact form are ideal for confined setups, and the tool’s balance between stiffness and accessibility supports both serial production and bespoke components alike. Contact Metav Werkzeuge for tailored compatibility advice on Teknik Makina tools; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U300TM Manufacturer: Teknik Makina Diameter: 13 mm Overall length: 111 mm Cutting length: 39 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.157 kg Compatible insert manufacturer: Taegutec Special features Indexable insert concept Compact cutting zone for reduced vibration Low mass for responsive behaviour Machined insert seat for consistent positioning FAQ What insert systems does the drill body accept? The drill body is designed to be compatible with inserts from Taegutec and comparable indexable systems; check the insert type required for specific seat geometry before mounting. What are the key dimensions for toolholder selection? Key dimensions include a 20 mm shank diameter, 50 mm shank length and 111 mm overall length, which are relevant when selecting collets or hydraulic chucks for mounting the tool. How does the design reduce downtime? By using indexable inserts the body allows quick edge changes; worn inserts are replaced individually, reducing the need to change the whole tool and keeping production moving. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise holemaking, wide compatibility with SPMG 0502 indexable inserts and a compact 20 mm shank for easy toolholder integration; order supply through Metav Werkzeuge or request technical advice from our consultants for fast procurement. Indexable insert drill U713TM by Teknik Makina — 13 mm diameter, for SPMG 0502 inserts The indexable insert drill U713TM is a compact drill body engineered for precision drilling operations in general machining, compatible with SPMG 0502 indexable inserts from leading manufacturers and suited to standard toolholders. *Compatible with SPMG 0502 insert type *13 mm nominal diameter *52 mm effective cutting length *20 mm shank for standard toolholders Precise drilling with proven insert compatibility The U713TM offers repeatable hole accuracy through a defined cutting geometry that accepts SPMG 0502 indexable inserts from Taegutec and YG-1. This compatibility enables quick insert exchange and consistent machining results across batch runs. For operations where setup time matters, the use of standardised inserts reduces downtime and simplifies inventory management. The compact design and measured cutting length make the tool suitable for through-holes and shorter blind holes when reliable concentricity is required. Stable cutting performance and toolholder integration With a 20 mm shank and a total length of 120 mm, the tool body integrates smoothly with common toolholders while providing sufficient overhang for many workshop applications. The 52 mm cutting length balances accessibility and rigidity, reducing chatter in typical metalworking setups. At approximately 0.17 kg, the assembly is lightweight yet robust enough for frequent insert changes, supporting efficient cycle times and predictable tool behaviour under standard machining feeds and speeds. Practical setup advice for consistent results When assembling the drill body, ensure inserts are correctly seated and torque settings on the clamp screws follow the insert manufacturer’s guidance. The U713TM’s design accommodates indexable inserts to facilitate rapid tool reconditioning; keeping an inventory of SPMG 0502 inserts from Taegutec or YG-1 allows immediate replacement and sustained tool life. For users less familiar with indexable systems, simple checks such as verifying seat cleanliness and clamp engagement will prolong cutting performance and maintain hole quality. For procurement of Teknik Cutting Tools indexable insert drill bodies such as the U713TM, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U713TM Manufacturer: Teknik Makina Compatible insert type: SPMG 0502 Compatible insert makers: Taegutec, YG-1 Core specifications Diameter: 13 mm Overall length: 120 mm Cutting length: 52 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.17 kg Materials & features Indexable insert drill body design Suitable for standard toolholders Designed for quick insert change FAQ Which inserts fit this drill body? The drill body accepts SPMG 0502 indexable inserts; recommended suppliers are Taegutec and YG-1 for direct compatibility with this design. What is the nominal diameter and overall length? The tool is specified at 13 mm nominal diameter with an overall length of 120 mm, providing a 52 mm cutting length for controlled reach and rigidity. Which shank size is required for mounting? The U713TM uses a 20 mm shank, suitable for common 20 mm toolholders and clamping systems. Is this suitable for blind holes? Yes; with a 52 mm cutting length the tool is appropriate for many blind-hole applications provided coolant and chip evacuation are managed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact dimensions and a precise Ø 4.5 mm interface support reliable mechanical linkage in confined assemblies; with an overall length of 13 mm and a lightweight construction of 0.1 kg, the part is optimised for responsive actuation — order the component via Metav Werkzeuge or consult their specialists for integration advice. Knee lever TL4TM – compact actuation lever, Ø 4.5 mm, 13 mm length by Teknik Makina A compact knee lever engineered for precise actuation and small-scale mechanical linkages in workshop and industrial fixtures. Compact design, 13 mm overall length Precise Ø 4.5 mm shaft interface Lightweight, approx. 0.1 kg Precise function where space is limited The knee lever delivers a compact solution for applications that demand a small footprint without sacrificing control. Its Ø 4.5 mm interface provides a defined connection point for shafts or pins, enabling consistent mechanical engagement in clamping or indexing linkages. The short overall length of 13 mm reduces lever arm overhang, which is beneficial in confined fixtures and where multiple components are mounted in close proximity. This section concentrates on measurable advantages so that planning and CAD integration can proceed from verified dimensions. Reduced inertia and straightforward integration With a mass of 0.1 kg, the lever contributes minimal inertia to moving assemblies, improving response time in frequently actuated mechanisms. The compact geometry eases incorporation into jigs, fixtures and small machines where dynamic balance matters. The functional benefit is a quieter, more efficient actuation cycle and lower wear on connected pivots. Technical teams will appreciate that the core measurable characteristics directly inform cycle-speed calculations and bearing selection for long-term reliability. Sourcing confidence and practical application advice Supplied by Teknik Cutting Tools (Teknik Makina), the component is suitable for workshop and light industrial use where small actuating elements are required. The product’s straightforward specification makes selection transparent and reduces uncertainty in procurement. Metav Werkzeuge acts as a quality filter for the European market, offering stocked supply from Emmerich and the logistical reliability expected by production planners and maintenance teams. For precise system matching, refer to the dimensional data and planning drawings before final assembly. For specification checks or to confirm suitability for a particular fixture, request the TL4TM knee lever from Metav Werkzeuge or speak to their technical advisors for part availability and delivery from Emmerich. Technical data Article number: TL4TM ECLASS: 21189290 Manufacturer: Teknik Makina Core data Diameter: 4.5 mm Overall length: 13 mm Weight: 0.1 kg Special features Product type: Knee lever Compact form factor SKU: TL4TM FAQ What are the exact external dimensions of this lever? The knee lever TL4TM has a diameter of 4.5 mm and an overall length of 13 mm as stated in the technical data. Is the lever suitable for fast actuation cycles? The lever’s lightweight construction (0.1 kg) and compact geometry make it appropriate for applications with frequent actuation, subject to system-level dynamic calculations. Can this lever be used in tight assemblies with limited overhang? Yes, the short overall length and small interface diameter are intended for installations where space is restricted. Which manufacturer supplies this component? This part is supplied by Teknik Cutting Tools (Teknik Makina), referenced under article number TL4TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Technical Data: Order Number: U814-1TM Item: Indexable Drill usable with SPMG 0502 Indexable Inserts of Taegutec und YG-1 Brand: Teknik Makina Metric Information: Diameter: 14,5mm Weight: 0.17kg Total length: 110mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a compact cartridge engineered for precise internal boring across a 14–24 mm range, compatible with CCMT 0602 indexable inserts and secured via a Torx T8 system; order the Cartridge 14–24mm for Boring Tool (THB04TM) directly via Metav Werkzeuge or ask our consultants if needed Cartridge 14–24mm for Boring Tool (THB04TM) — Boring tool cartridge by Teknik Makina A Cartridge 14–24mm for Boring Tool created for accurate internal boring in production and workshop environments, designed to take CCMT 0602 indexable inserts Cartridge 14–24 mm range Compatible with CCMT 0602 inserts Torx T8 retention system Secured with M2.5×4.7 Torx screw Consistent bore quality with indexable inserts The cartridge is built to ensure repeatable accuracy when machining internal diameters between 14–24 mm. By accepting CCMT 0602 indexable inserts, the module enables straightforward replacement of cutting edges without altering the holder alignment, which reduces downtime and maintains consistent bore geometry. For customers less familiar with insert codes: CCMT 0602 denotes a square insert with a 0.6 mm nose radius suitable for fine finishing and light roughing, offering a balance between edge strength and surface finish. Secure retention for fast, reliable tool changes Retention is handled with a Torx T8 key and a Torx screw sized M2.5×4.7, delivering a secure clamping method that resists loosening under cutting forces. This arrangement shortens set‑up time and keeps insert seating precise—important where cycle times are tight and part tolerances are critical. The compact fastener geometry also supports confident torque application, helping to avoid over‑ or under‑tightening and preserving tool life and component quality. Practical benefits for workshops and production lines As a component of a dedicated boring tool set, this cartridge streamlines tool management and cutting strategy. The combination of a clearly defined diameter range and standard insert compatibility reduces the need for specialised tooling stocks and simplifies inventory. Used in small series production or maintenance operations, it supports efficient changeovers and consistent results, contributing to overall productivity and fewer scrapped parts. For additional technical data or to confirm fitment in specific toolholders, further specifications can be provided on request via the contact details below. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina Cartridge 14–24mm for Boring Tool (THB04TM) into existing tooling systems or to request detailed drawings and availability Technical data Article number: THB04TM E-class: 21041590 Manufacturer: Teknik Makina Name: Cartridge 14–24mm for Boring Tool Facts Diameter range: 14–24 mm Torx key: T8 Torx screw: M2.5×4.7 Compatible inserts: CCMT 0602 Special features For boring tool sets Accepts CCMT 0602 indexable inserts Retention via Torx T8 and M2.5×4.7 screw FAQ What insert type does this cartridge accept? The cartridge is designed for CCMT 0602 indexable inserts, enabling easy edge replacement without altering holder set‑up. Which diameter range does the cartridge cover? The cartridge covers a 14–24 mm internal bore range suitable for small to medium internal turning tasks. How is the insert secured in the cartridge? Insert retention is achieved with a Torx T8 key and an M2.5×4.7 Torx screw to ensure stable clamping during operation. Is this cartridge compatible with standard boring tool holders? This cartridge is intended for use within compatible boring tool sets; confirm holder dimensions against the Cartridge 14–24mm for Boring Tool (THB04TM) specifications for fitment. Can the cartridge be used for finishing operations? Yes — when equipped with the appropriate CCMT 0602 insert geometry, the cartridge supports finishing passes that demand good surface quality and dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product data inconsistent: the item is designated "Vollbohrer" (solid drill) while compatibility fields reference indexable inserts (SOMT 0502, Taegutec). Please verify the product information and supply corrected specifications, ensuring that all details, including the product name, description, and compatibility fields, are accurate and align with the intended use or application of the item to avoid confusion or potential errors in selection, procurement, or usage. It is essential to confirm whether the item is indeed a solid drill or if it is designed to work with indexable inserts, as this discrepancy could impact its functionality, performance, and suitability for specific tasks or machining operations.

Take advantage of consistent holemaking thanks to the 14.5 mm nominal diameter, the stabilising 20 mm shank and the 56 mm effective cutting length for reliable production runs. Order the Vollbohrer U403TM directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer U403TM — Indexable-insert drill body with 14.5 mm diameter and 20 mm shank (Teknik Makina) A Vollbohrer U403TM designed as a drill body for replaceable SOMT 0502 inserts, intended for efficient, repeatable holemaking in workshop and light-production environments. *14.5 mm nominal diameter *20 mm shank for stable clamping *56 mm effective cutting length *Compatible with SOMT 0502 inserts Consistent, measurable hole accuracy for small-series production The drill body delivers repeatable diameter control by combining a true shank interface with a defined cutting length, which reduces setup variability. With a 14.5 mm nominal diameter and a 20 mm shank, the component is engineered to transfer torque and minimise runout during drilling cycles. The 56 mm cutting length provides sufficient engagement for through-holes and shallow blind holes while keeping chip evacuation predictable. These measurable parameters support process stability and help maintain tolerances across batches, reducing scrap and rework. Fast insert changes and clear compatibility reduce machine downtime Designed for indexable inserts, the tool accepts SOMT 0502 plates and is compatible with inserts from Taegutec, which simplifies procurement and replacement. The insert-based concept separates cutting geometry from the body: worn cutting edges are replaced instead of the entire tool, cutting maintenance time and tooling costs. The body’s 50 mm holder length and standard 20 mm interface make it suitable for common drill holders and spindles, enabling quick changeovers without custom adaptors. This modularity benefits shops that alternate materials or run short production batches. Robust design for workshop and on-machine applications With an overall length of 128 mm and a low mass of 0.175 kg, the drill body balances rigidity and manoeuvrability. The compact geometry helps to reduce vibrating tendencies while maintaining sufficient stiffness for controlled machining. The construction is tailored to indexable-insert workflows, supporting a clear chip flow and stable seat for the insert seat. For engineers specifying tooling, the component offers a practical mix of durability and serviceability, making it suitable for maintenance, prototyping and serial production where consistent results are required. Contact Metav Werkzeuge to discuss the Vollbohrer U403TM, confirm suitability for the intended machine and select the correct SOMT 0502 inserts and holders for optimal performance. Technical data Article number: U403TM Brand: Teknik Makina Designation: Vollbohrer U403TM Numbers Diameter: 14.5 mm Overall length: 128 mm Weight: 0.175 kg Shank diameter: 20 mm Cutting length: 56 mm Holder length: 50 mm Special features Compatible inserts: SOMT 0502 Recommended insert manufacturer: Taegutec Indexable-insert drill body Suited for workshop and light production FAQ What insert type fits this drill body? The drill body accepts SOMT 0502 indexable inserts; Teknik Makina’s U403TM is specified for that plate type and matches standard insert geometries. Is the shank compatible with common toolholders? Yes, the 20 mm shank is a common industrial interface and the U403TM is designed for stable clamping in standard drill holders. Can the tool be used for both through-holes and blind holes? The 56 mm cutting length on the U403TM makes it suitable for through-holes and for many shallow blind-hole applications, depending on the workpiece and holder setup. Which insert manufacturer is recommended? Taegutec inserts are recommended; the U403TM is compatible with Taegutec plates and the SOMT 0502 designation. How does the tool help reduce machining costs? By using replaceable inserts, the U403TM reduces tooling waste and downtime since only the insert is renewed at wear, not the entire body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact design that combines compatibility with multiple indexable insert sizes and a stable 20 mm shank for reliable threading performance; order the cutter directly via Metav Werkzeuge or consult our technical team for application advice. DC204TM thread milling cutter — for S12, S14, S21, S30 and S40 indexable inserts, Ø14.5 mm (Teknik Makina) The DC204TM thread milling cutter is a precision tool intended for machining internal and external threads with indexable inserts across several standard sizes, offering quick insert changes and predictable cycle times Compatible with S12–S40 indexable inserts Cutting diameter Ø14.5 mm 20 mm shank for secure clamping M2.5x7 Torx screw, T8 key included Consistent thread quality through precise geometry The cutter’s design prioritises repeatability and dimensional control: the combination of a defined cutting diameter and exchangeable indexable inserts ensures threads are produced with uniform pitch and profile. By using a standardised insert range, the tool reduces variability between setups and lowers scrap rates, which supports stable production runs and predictable process capability. This focus on precision is particularly valuable where tight tolerances and reproducibility are required. Secure clamping for vibration-resistant machining A 20 mm shank provides a robust connection to the toolholder, improving stiffness and reducing deflection during threading operations. Together with a carefully considered overall length of 85 mm, the assembly minimises chatter and enhances surface finish, especially on interrupted cuts. The inclusion of an M2.5x7 Torx screw and T8 key simplifies insert retention and replacement, shortening maintenance intervals and lowering machine downtime while maintaining consistent cutting conditions. Streamlined workshop logistics and faster set-up Compatibility with a broad range of insert sizes (S12, S14, S21, S30 and S40) allows the same cutter body to be used across different job types, reducing the need for multiple dedicated tools and simplifying inventory. This modular approach supports efficient workshop planning: fewer tool holders and insert types are required, which shortens setup times and accelerates job changeovers. The result is a tangible efficiency gain in batch production and mixed‑model environments. Practical service life and maintenance advantages The tool’s use of indexable inserts means wear is managed by replacing only the cutting edges rather than the entire cutter, which is cost-effective for medium to high volumes. Routine servicing is straightforward thanks to standard fasteners and the universal T8 drive, enabling trained staff to carry out secure insert changes quickly. Supplied by Teknik Makina, the cutter aligns with established industrial standards for robustness and repeatable performance, supporting dependable operation on CNC milling or turning centres. For reliable threading results from Teknik Makina, order the DC204TM via Metav Werkzeuge and benefit from our European supply chain and technical consultancy at Metav Werkzeuge Technical data Article number: DC204TM Manufacturer: Teknik Makina Core specifications Cutting diameter: 14.5 mm Overall length: 85 mm Shank diameter: 20 mm Torx screw: M2.5x7 Torx key: T8 ECLASS: 21180805 ETIM: EC011860 Compatibility & features Indexable inserts: S12, S14, S21, S30, S40 For S14 inserts Aufnahme Ø: 20 mm Manufacturer: Teknik Makina FAQ Which insert sizes can be used with this cutter? The cutter accepts a range of indexable inserts (S12, S14, S21, S30 and S40), allowing flexible selection depending on thread form and cutting conditions. What are the critical dimensions for toolholder selection? Key dimensions are a 20 mm shank and an overall length of 85 mm; these values determine holder compatibility and required clearance. How is the insert secured and replaced? Inserts are fixed with an M2.5x7 Torx screw; replacement uses a T8 key, facilitating quick and repeatable changes. Is this cutter suitable for heavy‑duty threading? The combination of a 20 mm shank and standardised inserts provides good stiffness for typical industrial threading tasks; final suitability depends on the specific workpiece and machine setup. Who supplies the cutter and who is responsible for distribution? The tool is supplied by Teknik Makina and distributed through Metav Werkzeuge to ensure consistent availability for European workshops. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, secure clamping and a compact form factor for dependable parting and grooving operations; the combination of a 4 mm cutting width and compatibility with Korloy MGM 4 inserts ensures efficient chip control and predictable tool life. Order directly via Metav Werkzeuge or consult the Metav team for integration advice. Parting tool holder D791-1TM — Right‑hand parting tool holder by Teknik Makina, 4 mm cutting width A Parting tool holder D791-1TM engineered for right‑hand parting and grooving on CNC lathes, suitable for standard insert geometries and workshop integration Right-hand parting for precision operations 4 mm cutting width for narrow grooves Compatible with Korloy MGM 4 inserts 150 mm overall length, 0.667 kg weight Faster cycle times through narrow, stable cutting The compact design with a 4 mm cutting width supports reliable chip control and reduced material waste in narrow groove and parting tasks, translating into measurable time savings on repetitive production runs. With a maximum effective cutting diameter of 600 mm, the holder addresses a wide range of turning applications while the right‑hand cutting orientation aligns with common lathe configurations. The result is an efficient, predictable process that reduces unexpected downtime and supports consistent throughput. Secure clamping for longer insert life A 25 mm cutting‑head width and a cutting height of 49 mm deliver robust seating for indexable inserts, improving clamping accuracy and vibration damping. The ISO designation 2525 and the boreshaft reference 4C (140–600) permit straightforward mounting into compatible tool posts, while the solid construction and a mass of 0.667 kg contribute to stable cutting forces. This combination lowers insert wear and reduces frequency of tool changes, contributing to lower operating costs and higher first‑pass yield. Workshop fit and practical integration An overall length of 150 mm and a shank/edge length of 25 mm make the holder simple to position in tight setups and multi‑station turrets. The unit is expressly matched to Korloy MGM 4 insert formats and offers a maximum parting blade penetration of 25 mm, enabling controlled interruption cuts and clean separation. Specifications favour quick retrofitting into existing production cells and support consistent results across serial production. For specialised setups, the clear numeric data assists in planning tool life and spindle load calculations. Contact Metav Werkzeuge for a compatibility check or assistance integrating the D791-1TM parting tool holder into the production line — Metav Werkzeuge GmbH, Emmerich; info@metav-werkzeuge.com; +49 2822 7131930 Technical data SKU: D791-1TM Manufacturer: Teknik Makina ECLASS: 21181005 Designation: Parting tool holder (translated from source) Facts Overall length: 150 mm Cutting width: 4 mm Cutting head width: 25 mm Cutting height: 49 mm Shank/edge length: 25 mm Maximum cutting diameter: 600 mm Weight: 0.667 kg Mounting bore designation: 4C (140–600) Special features ISO designation: 2525 Compatible with Korloy inserts Insert size: MGM 4 Right‑hand cutting direction Maximum parting blade penetration: 25 mm FAQ What insert type fits this holder? The holder is designed for Korloy MGM 4 style indexable inserts; the clamping geometry and seat dimensions match that insert family to ensure correct fit and repeatability. Is the cutting direction fixed? Yes, the unit is configured for right‑hand cutting operations, suitable for conventional lathe parting and grooving setups. Which shank or mounting sizes are supported? Mounting is compatible with the boreshaft designation 4C (140–600) and the ISO 2525 form factor; verify turret or toolpost bore dimensions before installation. What is the maximum effective cutting diameter? The holder supports operations up to an effective cutting diameter of 600 mm, as provided in the technical specifications. How deep can the parting blade penetrate? The maximum parting/blade penetration is 25 mm, allowing controlled separation depths for most standard turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust clamping system with precise 25 mm cutting-head control and compatibility with MGM 4 inserts to keep turning and grooving cycles consistent and efficient; order via Metav Werkzeuge or consult their specialists for integration advice. Stechklemmhalter D811-1TM – Parting and grooving clamping holder, left-hand, ISO 2525 by Teknik Makina A reliable Stechklemmhalter designed for left-hand parting and grooving operations on lathes, compatible with standard MGM 4-style inserts and shank designation 2525 for straightforward toolholder integration Left-hand cutting direction Compatible with Korloy MGM 4 inserts 25 mm cutting head width ISO 2525 shank designation Consistent clamping for accurate parting and grooving A secure clamp is essential when performing grooving or parting operations; the D811-1TM provides stable tool retention that reduces chatter and improves surface finish. The holder’s robust clamping mechanism keeps the insert seat rigid under cutting forces, which translates into repeatable part quality and longer insert life. For operations where consistent groove widths or clean part-offs are required, predictable tool behaviour cuts rework and increases throughput. Broad compatibility reduces tooling complexity The design accepts MGM 4 format inserts and is specified as compatible with Korloy cutting inserts, enabling simple replacement with widely available grades. Using a common insert family makes it easier to switch grades for different materials without changing the holder, lowering inventory complexity. This interchangeability supports efficient workshop logistics and faster set-ups, especially beneficial in mixed-production environments where quick tool changeovers matter. Optimised for left-hand cutting and safe machining Specified for left-hand cutting, the holder is tailored to applications that require operations from the opposite direction of standard right-hand tooling. That specification helps clarify mounting and prevents misapplication. The holder’s designation 4C-L (140-600) indicates the shank range and intended diameter adaptability, and the stated max cutting diameter 600 mm provides guidance for appropriate lathe usage. Clear directionality and defined limits reduce the risk of incorrect installation and improve operator safety. Compact dimensions that lower vibration and improve accessibility With an overall length of 150 mm, a cutting-head width of 25 mm and a narrow insert width of 4 mm, the holder keeps overhang to a minimum and helps maintain rigidity in confined setups. The modest mass (0.667 kg) further helps in dynamic balance and makes handling during tool changes straightforward. These dimensions support closer clearance to workpiece features, simplify access in tight toolposts and assist in achieving stable cutting conditions for fine grooving tasks. For tailored integration of the Teknik Makina D811-1TM into production setups and assured supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability and order details. Technical data Article number: D811-1TM Product name: Stechklemmhalter Manufacturer: Teknik Makina Weight: 0.667 kg Core dimensions Overall length: 150 mm Shank/diameter: 140 mm Max cutting diameter: 600 mm Cutting-head width: 25 mm Insert width: 4 mm Cutting height: 49 mm Maximum parting depth: 25 mm Compatibility & features Compatible inserts: MGM 4 Suitable insert manufacturer: Korloy Shank designation: 2525 (ISO) Shank series: 4C-L (140-600) Cutting direction: left FAQ Which inserts fit this holder best? The Stechklemmhalter D811-1TM accepts MGM 4 inserts; Korloy MGM 4 grades are listed as compatible with this holder for standard grooving and parting tasks. Is the holder suitable for heavy-duty parting at large diameters? The D811-1TM is rated for a maximum cutting diameter of 600 mm; application at larger diameters should consider machine rigidity and clamping conditions. How does left-hand cutting affect mounting? Left-hand specification means the tool cuts when mounted for opposite rotational direction compared with right-hand tools; correct mounting of the D811-1TM prevents improper cutting forces and ensures safe operation. What are the key dimensions to check before ordering? Important measurements include overall length 150 mm, shank/diameter 140 mm, cutting-head width 25 mm and insert width 4 mm; these determine fit in the toolpost and compatibility with insert sizes. Which shank series is this holder compatible with? The holder uses the 4C-L (140-600) shank designation and corresponds to ISO 2525 sizing for integration into appropriate tool blocks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise indexable-insert compatibility, a compact 10 mm shank, and a 62.5° cutting angle for stable, repeatable boring operations. Order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. S10J SD-CR Drill Bar — 62.5° for DC-- 0702 Indexable Inserts by Teknik Makina The S10J SD-CR is a precision drill bar designed for right-hand turning and boring operations, optimised for use with DC-- 0702 indexable inserts in compact toolholders. Compatible with DC-- 0702 indexable inserts 62.5° cutting angle for reliable chip control 10 mm shank diameter for compact clamping Robust metal construction, weight 0.082 kg Stable cutting geometry for predictable results The 62.5° cutting geometry provides a controlled chip formation that reduces vibration and supports a consistent surface finish. By pairing the 62.5° cutting angle with the appropriate DC-- 0702 indexable inserts, the assembly delivers steady material removal rates and predictable wear behaviour. For users unfamiliar with insert tooling, indexable inserts are replaceable cutting tips that avoid full-tool replacement; this reduces downtime and simplifies maintenance cycles. The right-hand cutting configuration ensures conventional lathe setups can be used without modification, maintaining process reliability and repeatability. Compact shank and rigid construction minimise deflection A 10 mm shank diameter and an overall length of 110 mm provide a compact package suited to tight toolpost spaces and small-toolholder systems. The bore diameter of 14 mm at the cutting end and a cutting height of 25 mm ensure the cutting geometry is supported close to the insert, reducing cantilever effects. The low mass (approximately 0.082 kg) contributes to reduced centrifugal loads at higher spindle speeds and helps maintain accuracy in finishing passes. For workshop planners, the compact dimensions translate into improved access on multi-tool turrets and easier handling during set-up. Durable choice with workshop efficiency in mind Manufactured for robust industrial use, the bar is intended for repetitive turning and boring tasks where frequent insert changes and swift reconditioning are required. Compatibility with the DC-- 0702 family allows stocking a small range of inserts for multiple operations, lowering inventory complexity. The straightforward ISO identification (S10J SD-CR) simplifies procurement and ensures compatibility across standard clamping systems. As an economical alternative to custom solid tools, this indexable-insert solution reduces long-term tooling costs while preserving machining quality and uptime. Choose Teknik Makina's S10J SD-CR for dependable boring performance and contact Metav Werkzeuge for purchase advice or to discuss application details — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K168TM Manufacturer: Teknik Makina ISO designation: S10J SD-CR Model: SD-CR for DC-- Indexable Inserts Measurements Shank diameter: 10 mm Diameter: 14 mm Cutting height: 25 mm Overall length: 110 mm Weight: 0.082 kg Cutting angle: 62.5° Compatibility & features Compatible inserts: DC-- 0702 Cutting direction: Right-hand Clamping holder designation: 07 FAQ Which inserts are compatible with this drill bar? The drill bar is designed for use with DC-- 0702 indexable inserts; matching the insert grade to the workpiece material ensures the best tool life and surface finish. What does the 62.5° cutting angle mean for machining? A 62.5° cutting angle provides a balance between chip control and cutting edge strength, helping to reduce vibration and deliver consistent finishing results in typical turning and boring operations. Can the bar be used in compact toolholders? Yes, the 10 mm shank diameter and 110 mm overall length make the tool suitable for compact toolholders and tight turret spaces, improving access for multi-station setups. Is the S10J SD-CR suitable for high-speed operations? The bar’s compact design and low mass (0.082 kg) help reduce centrifugal forces; however, cutting speed suitability depends on the chosen insert grade and machine limits rather than the bar alone. How does using indexable inserts affect workshop efficiency? Indexable inserts allow rapid tip replacement without removing the toolholder, reducing downtime and inventory needs; the S10J SD-CR supports this efficiency by being compatible with a widely used insert size. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Precision and stability come together in a compact design: the STI boring bar K350TM offers a Ø14 mm head with a shank Ø12 mm and 125 mm overall length, delivering repeatable internal turning performance for indexable insert operations. The secure IR11 clamping and right-hand cut ensure reliable chip control and minimal vibration. Order the STI boring bar K350TM directly via Metav Werkzeuge or ask our consultants if needed. K350TM STI Boring Bar by Teknik Makina — Ø14 mm, right-hand K350TM STI Boring Bar is a right-hand indexable insert holder engineered for internal turning with IR/ER indexable inserts, suited to lathe and turning centre applications. Right-hand cutting for conventional set-ups Fits 11 IR indexable inserts Shank Ø12 mm for secure clamping 125 mm overall length for extended reach Consistent internal turning accuracy for batch production The STI boring bar is designed to provide stable cutting and repeatable geometry in internal turning tasks. Its compact head diameter of Ø14 mm reduces runout and vibration, which results in improved surface finish and tighter tolerance retention. The combination of a reduced head profile and a robust shank Ø12 mm creates a stiff tool assembly that, when mounted in a suitable holder, gives predictable tool life and reduced rework. For operators and production engineers, this translates into fewer setup adjustments and a steadier process window during serial machining. Fast changeover and insert compatibility for efficient workflows Configured for 11 IR indexable inserts and labelled as STI for IR/ER indexable inserts, the toolholder supports quick insert indexing and replacement, lowering downtime between operations. An IR11 clamping designation ensures compatibility with established clamping systems, while the ISO reference S12K STIR clarifies the holder geometry for integration into existing tool libraries. The use of indexable inserts keeps tooling costs manageable: only the cutting tip is replaced when worn, rather than the entire tool, improving cost efficiency and spare-part logistics in production environments. Designed for secure clamping and improved chip control Right-hand cutting orientation and the specified clamping interface deliver reliable seating and repeatable axial position. The IR11 clamping holder interface is intended to secure the insert firmly, lowering the risk of displacement under load. With a 125 mm overall length, the tool achieves necessary reach into bores while preserving rigidity; this balance of reach and stiffness reduces chatter and supports consistent chip evacuation. Engineers will appreciate the predictable behaviour under varied cutting parameters, which simplifies process qualification and parameter optimisation. Practical advantages supported by Metav’s supply and expertise Sourced through Metav’s distribution, the tool benefits from a supply chain positioned as a European quality filter: central stock in Emmerich and specialist advice tailored to workshop requirements. The design of the holder, combining the STI geometry with a compact Ø14 mm head, addresses common internal turning challenges such as access, visibility and cooling. Where process integration is required, technical data and fitting advice can be provided, enabling efficient selection of inserts and clamping accessories to match spindle speeds and feed rates. For precise internal turning tasks, request a technical consultation or place an order for the K350TM STI boring bar via Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for expert assistance and rapid delivery Technical Data SKU: K350TM Manufacturer: Teknik Makina Article designation: STI for IR/ER indexable inserts (boring bar) ISO designation: S12K STIR Core data Diameter: 14 mm Shank diameter: 12 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.117 kg Special features For indexable inserts: 11 IR Cutting direction: Right-hand Clamping holder designation: IR11 ECLASS: 21180806 Files: 2 attachments available FAQ Which insert types are compatible with this boring bar? The K350TM accepts 11 IR indexable inserts and is designated STI for IR/ER indexable inserts, meaning it is compatible with IR and ER style inserts that match the IR11 clamping geometry. What is the ISO designation and why does it matter? The holder carries the ISO designation S12K STIR, which identifies the shank and head geometry; this helps to ensure the correct selection of holder pockets and tool presetting in the tool room. How is the insert secured in the holder? Clamping is provided via the IR11 interface; the insert is located and clamped by the holder seat and fastener, ensuring repeatable seating and robust resistance to cutting forces. Is the tool suitable for extended internal reach applications? With an overall length of 125 mm the bar offers increased reach while retaining a shank Ø12 mm that contributes to rigidity, making it suitable for many internal turning tasks where access is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com