Gibt es einen Hahn und Kolb Online Shop?

Product Information: Order Number: U145TM Item: Indexable Drill usable with WCM- 0302 Indexable Inserts of Korloy Brand: Teknik Makina Metric Information: Diameter: 17,5mm Weight: 0.336kg Total length: 127mm Diameter Connection: 25mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Detailed Technical Data: Order Number: U817-1TM Item: Indexable Drill usable with SPMG 0602 Indexable Inserts of Taegutec und YG-1 Brand: Teknik Makina Metric Information: Diameter: 17,5mm Weight: 0.318kg Total length: 127mm Diameter Connection: 25mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Data: Order Number: U409TM Item: Indexable Drill usable with SOMT 0602 Indexable Inserts of Taegutec Brand: Teknik Makina Numerical Representations: Diameter: 17,5mm Weight: 0.348kg Total length: 146mm Diameter Connection: 25mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Information: Order Number: U309TM Item: Indexable Drill usable with SOMT 0602 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Quantitative Characteristics: Diameter: 17,5mm Weight: 0.318kg Total length: 129mm Diameter Connection: 25mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Specifications: Order Number: TKB150TM Item: Boring Tool usable with CCMT 1204 Indexable Inserts Brand: Teknik Makina Quantitative Characteristics: Diameter: 170-250mm Weight: 5.011kg Total length: 154mm Diameter Connection: 40mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Turning Holder (Klemmhalter) — DCLNL 3232 for CN-- 1204 Indexable Inserts The Turning Holder is a precision clamping tool designed for left-hand turning with CN-- 1204 indexable inserts, suited to workshop and production lathe operations. Compatible with CN-- 1204 indexable inserts DCLNL 3232 ISO designation 170 mm overall length for extended reach 95° cutting angle for stable support 32 x 32 mm shank for rigid clamping Designed for Reliable Clamping and Rigidity Built around the DCLNL 3232 geometry, this toolholder offers a compact shank of 32 x 32 mm and a 40 mm wide cutting head that together maximise Rigidity during machining. The robust form factor reduces vibration and improves surface finish, so operators benefit from consistent results even under interrupted cuts. The construction is tailored to support the CN-- 1204 insert format while keeping tool overhang minimal for better tool life and repeatable accuracy. Precision Tailored for Left-Hand Turning Operations With a defined 95° cutting angle and a left-hand cutting direction, the holder is optimised for stable engagement and predictable chip flow in facing and external turning tasks. It accepts CN-- 1204 indexable inserts, which are replaceable carbide tips that simplify maintenance and reduce downtime. For users less familiar with indexable tooling: these inserts allow fast replacement without regrinding, keeping setups accurate and productive. Practical Applications and Ideal Users This Turning Holder is designed for Machine Shops, maintenance departments and production lines that require dependable left-hand tooling for turning operations. It is particularly useful where repeatability and quick insert changes matter — for example in batch production or toolrooms handling mixed material runs. The toolholder’s dimensions and geometry prioritise stability, making it a suitable choice for technicians focused on throughput and surface quality. Quick Setup, Compatibility and Identification Installation is straightforward thanks to the standard ISO designation DCLNL 3232, which helps in matching clamping fixtures and turret setups. The holder is listed with the shank/bead designation P12 for compatibility checks and has a total length of 170 mm, providing a balance between reach and stiffness. A GTIN (EAN) is available for ordering and inventory control. For precise integration into your workflow, verify turret clearance and insert orientation before first use. Choose the Teknik Makina Turning Holder for dependable, precision left-hand machining — contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or call +49 2822 7131930. Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D305TM Compatible Inserts: CN-- 1204 ISO Designation: DCLNL 3232 Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Overall Length: 170 mm Cutting Direction: Left Cutting Angle: 95° Shank/Bar Designation: P12 Weight: 1.379 kg Availability: In stock Condition: New GTIN / EAN: 4061905151439 Label: Klemmhalter DCLNL 3232 95° CN-- 1204 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which orientation is required? The Turning Holder by Teknik Makina is designed for CN-- 1204 indexable inserts and is configured for left-hand cutting; ensure the insert is mounted according to the left-hand orientation to achieve correct chip flow and cutting geometry. Can the DCLNL 3232 holder be used on standard lathe turrets? Yes, the DCLNL 3232 ISO designation of this Klemmhalter matches common turret interfaces; confirm turret slot size and clearance before installation to guarantee secure clamping and optimal performance. How does the 95° cutting angle benefit machining with this Turning Holder? A 95° cutting angle provides enhanced support at the cutting edge, improving stability and reducing deflection; Teknik Makina’s holder geometry helps deliver improved surface finishes during facing and external turning operations. Who can assist if I need further technical information about the Klemmhalter? If you are uncertain whether the Turning Holder meets your requirements or need additional technical data, METAV Werkzeuge offers expert advice — contact them at info@metav-werkzeuge.com, by phone +49 2822 7131930, or via WhatsApp +49 170 2837271. 95° DCLNL 3232 Turning Holder for CN-- 1204 Indexable Inserts, 170 mm Length, Left Cut - Teknik Makina

Teknik Makina Klemmhalter — Turning Holder The Klemmhalter is a precision Turning Holder designed for CN-- 1606 indexable inserts, delivering a 95° Cutting Angle and robust support for left-hand turning applications. Compatible with CN-- 1606 indexable inserts 170 mm Overall Length for increased Stability DCLNL 3232 ISO designation for precise fit 95° Cutting Angle for consistent chip control Left-hand Cutting Direction for dedicated operations Durable design for reliable clamping and stability The Holder is engineered with a compact 32 mm Width and 32 mm Height, combining a solid cross-section with a 40 mm Cutting Head Width to ensure mechanical Stability during machining. This structural design reduces vibration and supports consistent Surface Finish when turning, so tooling life and workpiece quality are improved. The robust construction makes the Holder suitable for demanding operations where firm clamping and repeatable Geometry are required. Precision fit and easy integration with indexable inserts Thanks to the DCLNL 3232 ISO designation and clear compatibility with CN-- 1606 inserts, the Holder offers repeatable positioning and simple tool changeover. The predetermined geometry maintains the correct tool Projection and 95° Cutting Angle, which aids in Chip Control and helps achieve accurate Turning Dimensions. For workshops that prioritise setup speed and interchangeability, this Holder minimises adjustments and supports efficient machining cycles. Optimised for left-hand turning operations With a dedicated left-hand Cutting Direction, this Turning Holder is tailored for specific machining setups where orientation matters. A consistent Cutting Angle and a well-defined insert seat contribute to stable Cutting Forces and predictable tool behaviour. Users who perform reversing operations or require dedicated left-hand tooling will find the Holder enhances process Reliability and reduces the need for custom fixturing. Who benefits from this Holder and typical use cases The product targets professional machinists and production environments that rely on indexable tooling for small to medium batch turning. The Holder is especially relevant for workshops working with standard CN-- 1606 inserts and requiring a 170 mm Overall Length for reach and clearance. Its combination of fit, geometry and dedicated left-hand orientation makes it a good choice for component turning where precision and repeatability are priorities. For demanding turning applications, choose the Teknik Makina Klemmhalter with its 95° Cutting Angle — METAV Werkzeuge offers expert advice and personalised support: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical information Designation: Klemmhalter Brand/Manufacturer: Teknik Makina SKU: D306TM GTIN: 4061905151453 Compatible Inserts: CN-- 1606 ISO designation: DCLNL 3232 Secondary designation: P16 Overall length: 170 mm Width: 32 mm Height: 32 mm Cutting head width: 40 mm Cutting angle: 95° Cutting direction: left Weight: 1.407 kg Availability: in Stock Condition: new Label: Klemmhalter DCLNL 3232 95° CN-- 1606 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Klemmhalter from Teknik Makina (Turning Holder)? The Klemmhalter by Teknik Makina is designed to accept CN-- 1606 indexable inserts; this Turning Holder features the DCLNL 3232 seat to ensure a secure and repeatable fit with those inserts. Is the Klemmhalter suitable for left-hand turning setups? Yes, the Teknik Makina Klemmhalter is specified for left-hand Cutting Direction and the 95° Cutting Angle supports stable chip formation and control in left-hand turning operations. What dimensions of the Holder are most relevant for integration into my toolpost? Important dimensions for integration are the 170 mm Overall Length, 32 mm Width, 32 mm Height and 40 mm Cutting Head Width; these values describe the Holder’s footprint and reach for planning toolpost clearance. Can METAV Werkzeuge provide additional technical support for the Klemmhalter? If further technical details are needed for the Teknik Makina Klemmhalter or assistance with tool selection, METAV Werkzeuge offers competent consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930. 170mm DCLN Turning Holder for CN-- 1606 Indexable Inserts, 95° Left - Teknik Makina

Klemmhalter — Turning Holder by Teknik Makina The Turning Holder is a right-hand toolholder for DN-- 1506 indexable inserts, designed for precise turning operations in metalworking and workshop environments. Turning Holder for DN-- 1506 indexable inserts 170 mm overall length for secure tool mounting Right-hand cutting direction with 107.5° cutting angle 32 mm shank width and height for stable clamping 40 mm cutting head width for versatile operations Stable clamping for consistent machining results The holder features the DDHNR 3232 ISO designation and a compact 32 mm shank that delivers stable clamping and reduced vibration during cuts. This stability translates into improved Surface Finish and longer Insert Life when machining steels and cast irons. The robust build supports reproducible set-ups and reliable repeatability in serial production, making it suitable for both single-part jobs and batch runs. Geometry optimised for chip control and finish With a cutting angle of 107.5° and a right-hand cutting direction, the geometry is tuned for predictable chip flow and controlled cutting forces. That engineering reduces built-up edge and helps to maintain dimensional accuracy on turned profiles. The result is fewer rework cycles and a better first-pass quality on turned components, which benefits shops focused on efficiency and consistent tolerances. Practical design for everyday workshop use At an overall length of 170 mm, the toolholder balances accessibility and rigidity, allowing comfortable setup in standard lathes while maintaining the stiffness required for heavier cuts. The 40 mm cutting head width provides room for a variety of DN-- 1506 indexable inserts, enabling quick insert changes and flexible machining strategies. The design supports quick clamping and straightforward alignment to save time during tool changes. Compatible inserts and clear guidance for users This toolholder accepts DN-- 1506 indexable inserts; indexable inserts are replaceable cutting tips that allow rapid renewal of the cutting edge without replacing the entire toolbody. For shops new to indexable tooling, choosing the correct insert grade and geometry is key to performance. The holder’s ISO designation and shank dimensions simplify selection and ensure compatibility with common Insert Types used in turning operations. Choose Teknik Makina for dependable toolholding — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Information Bezeichnung: Klemmhalter / Turning Holder Brand: Teknik Makina SKU: D098TM For Indexable Inserts: DN-- 1506 Compatible Inserts: DN-- 1506 Overall Length: 170 mm Weight: 1.29 kg ISO Designation: DDHNR 3232 Secondary Designation: P15 Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Angle: 107.5° Cutting Direction: Right GTIN: 4061905150807 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter Turning Holder from Teknik Makina? The Klemmhalter Turning Holder by Teknik Makina is designed for DN-- 1506 indexable inserts; using the specified DN-- 1506 Inserts ensures correct seating, reliable clamping and predictable cutting performance. Is the Klemmhalter Turning Holder suitable for heavy cuts? Yes, the Turning Holder’s 32 mm shank and 40 mm cutting head width provide the necessary stiffness for tougher turning operations, but final performance depends on machine rigidity and chosen insert grade. How do I mount the inserts in the Klemmhalter Turning Holder? Insert mounting follows standard procedures for indexable systems: clean the seat, place the DN-- 1506 insert in position, and tighten the clamping screw to the manufacturer’s torque. Teknik Makina specifications and METAV Werkzeuge can provide torque and setup guidance. Who can I contact for technical support and advice? For detailed technical consultation about the Klemmhalter Turning Holder, METAV Werkzeuge offers expert advice — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271. 107.5° Turning Holder DDHNR 3232 for DN-- 1506 Indexable Inserts, 170 mm Length, Right - Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina A Turning Holder engineered for secure clamping of DN-- 1506 indexable inserts, ideal for precise right-hand turning tasks in workshop and production environments. DDJNR 3232 ISO design for rigid clamping Compatible with DN-- 1506 indexable inserts 170 mm overall length for extended reach 93° cutting angle for accurate right-hand cuts 32 x 32 mm shank for stable machine mounting Precision clamping for consistent machining results The Turning Holder (Klemmhalter) employs an ISO DDJNR 3232 design to deliver rigid clamping, which reduces vibration and improves surface finish on turned parts. This stability translates directly into longer tool life for the indexable inserts and fewer rework cycles. For operators unfamiliar with ISO codes: DDJNR identifies the holder Geometry and clamping method, ensuring compatibility with inserts specified for DN-- 1506. The result is predictable machining performance and repeatable tolerances. Designed for DN-- 1506 inserts and right-hand operations Built specifically for DN-- 1506 indexable inserts, the holder accommodates standard insert geometry so setup is straightforward and repeatable. A 93° cutting angle supports clean right-hand cuts, helping to control chip flow and cutting forces. This makes the tool holder well suited to turning tasks where directional cutting stability is essential. For users new to indexable tooling: indexable inserts are replaceable cutting tips that allow quick renewal without regrinding, reducing machine downtime. Suitable for professional workshops and production lines Workshops and production facilities benefit from the turning holder’s 32 mm shank cross-section and 170 mm overall length, which offer compatibility with many turret and toolpost setups and provide extended reach for deeper cuts. Maintenance routines become simpler because insert changes are fast and tool repeatability is high. This component is targeted at machinists seeking robust clamping and reliable repeatability rather than occasional hobby use. Key design features that reduce setup time and increase uptime Attention to functional details—such as a 40 mm cutting-head width and the P15 secondary designation for the clamping interface—helps to minimise setup adjustments and secures the insert firmly during operation. By focusing on a compact, standardised geometry, the holder reduces the need for bespoke fixtures and supports efficient tool management. Production teams gain from predictable tool behaviour and lower variance between setups. Strong recommendation: Choose the Teknik Makina Turning Holder for reliable, repeatable turning performance and contact METAV Werkzeuge for expert consultation via eMail info@metav-werkzeuge.com or phone +49 2822 7131930 — WhatsApp support is also available at +49 170 2837271. Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D174TM Für Wendeschneidplatten: DN-- 1506 Passende Wendeplatten: DN-- 1506 Gesamtlänge: 170 mm Gewicht: 1.345 kg ISO Bezeichnung: DDJNR 3232 Bezeichnung 2: P15 Breite: 32 mm Höhe: 32 mm Schneidekopf Breite: 40 mm Schnittwinkel: 93° Schnittrichtung: right GTIN: 4061905150692 Label: Klemmhalter DDJNR 3232 93° DN-- 1506 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder from Teknik Makina compatible with DN-- 1506 inserts? Yes, the Teknik Makina Turning Holder (Klemmhalter) is designed specifically for DN-- 1506 indexable inserts and ensures correct seating and secure clamping for reliable cutting performance. What is the overall length and how does it affect use? The Teknik Makina Turning Holder has an overall length of 170 mm; this extended reach supports deeper turning operations while maintaining stability when mounted with a 32 x 32 mm shank. Which cutting direction is supported by this holder? The Teknik Makina Turning Holder (Klemmhalter) is configured for right-hand cutting, using a 93° cutting angle to promote precise chip control and consistent surface finish. Who can I contact for technical advice before purchase? For expert guidance on the Teknik Makina Turning Holder and its suitability for your applications, METAV Werkzeuge offers comprehensive consultation — eMail info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271. 170mm DDJNR Turning Holder for DN-- 1506, 93° Right, DDJNR 3232 - Teknik Makina

Turning Holder (Klemmhalter) — Teknik Makina DSSNR for SNMG Indexable Inserts The Turning Holder is a right-hand DSSNR 3232 toolholder designed to secure SNMG 1204 indexable inserts for precise external turning in production and workshop environments. Turning Holder for SNMG 1204 inserts ISO designation DSSNR 3232 for stable clamping 170 mm overall length for reach and rigidity 45° cutting angle for controlled chip flow 40 mm shank width and 32 mm head width Precision clamping that reduces setup variation A robust clamping concept ensures consistent seating of the SNMG 1204 insert and reduces micro-movement during cuts. The ISO designation DSSNR 3232 signals a standardized geometry that simplifies tool selection and repeatability across setups. This results in fewer re-touches and more predictable part quality without needing constant readjustment. Increased reach while maintaining stiffness for heavier cuts With an overall length of 170 mm and a shank width of 40 mm, the toolholder balances reach and rigidity to support deeper overhangs while limiting deflection. The compact head width of 32 mm contributes to a stable interface between insert and holder, enabling consistent surface finish even under intermittent heavy cuts. This design is especially suitable for small-batch CNC turning where accessibility and stiffness matter. Controlled cutting geometry for reliable chip control A 45° cut angle combined with a right-hand cutting direction directs chips away from the workpiece and toolholder, improving surface integrity and reducing recutting. The cutter head and insert pocket are engineered to maintain the correct rake and clearance for SNMG-style inserts, translating into steady tool life and predictable performance on common ferrous and non-ferrous materials. Practical compatibility and application focus The holder is optimized for use with SNMG 1204 indexable inserts and fits setups where a DSSNR-type mounting is specified. Workshops running lathe operations, maintenance shops, and small production lines will value the simple interchangeability and proven mechanical interface. The component is supplied by Teknik Makina, aiming to integrate seamlessly into established tooling systems. Strong recommendation: Choose the Teknik Makina Turning Holder for dependable external turning and contact METAV Werkzeuge for expert application support — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D205TM For Indexable Inserts: SNMG 1204 Compatible Inserts: SNMG 1204 Overall Length: 170 mm Weight: 1.28 kg ISO designation: DSSNR 3232 Secondary designation: P12 Shank Width: 40 mm Height: 32 mm Cutting Head Width: 32 mm Cutting Direction: right Cutting Angle: 45° GTIN: 4061905052613 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Teknik Makina Turning Holder (Klemmhalter) is designed for SNMG 1204 indexable inserts and accepts standard SNMG 1204 geometries for straightforward mounting and replacement. Is the DSSNR 3232 holder suitable for heavy turning operations? The DSSNR 3232-design Turning Holder by Teknik Makina offers a 170 mm length and 40 mm shank width that provide a good balance of reach and stiffness for many external turning tasks, making it suitable for moderate to demanding cuts when used with appropriate inserts. Which cutting direction does the Teknik Makina Klemmhalter support? The Teknik Makina Klemmhalter (Turning Holder) is configured for right-hand cutting, optimized to work with SNMG 1204 inserts in standard right-handed turning operations. Can METAV Werkzeuge assist with tool selection for this holder? Yes. METAV Werkzeuge provides comprehensive advice for tool and insert pairing for the Teknik Makina Turning Holder; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support. 170mm DSSNR 3232 Turning Holder for SNMG 1204, 45°, Right - Teknik Makina

Turning Holder DSSNR for SNMG Indexable Inserts by Teknik Makina The Turning Holder secures SNMG 1906 indexable inserts for right-hand turning operations, delivering a 45° cutting angle and a compact 170 mm Overall Length for stable, precise machining. For SNMG 1906 indexable inserts ISO DSSNR 3232 designation Overall Length 170 mm 45° Cutting Angle for precise turning Right-hand Cutting Direction Precision and stability for demanding turning applications The Turning Holder from Teknik Makina is engineered to provide exceptional Rigidity and vibration damping during heavy or finish turning. Its 45° Cutting Angle supports improved Chip Flow and reduces radial cutting forces, which results in smoother surface quality and longer Tool Life. By focusing on stability rather than excessive overhang, this clamping solution helps achieve consistent results on both roughing and finishing passes while keeping setup times low. Optimised compatibility with SNMG 1906 inserts This holder is specifically designed for SNMG 1906 indexable inserts and conforms to the DSSNR 3232 ISO designation, enabling quick insert changes and reliable seating. Compatibility with common insert geometries reduces inventory complexity and makes the toolholder a cost-effective choice for shops that rely on standardized tooling. The secure clamping mechanism minimises insert movement under load, helping to protect the cutting edge and maintain repeatable machining accuracy. Compact build that enhances workshop flexibility With an Overall Length 170 mm and a nominal Width of 40 mm, the toolholder combines compactness with sufficient mass to dampen vibrations. The moderate Height and a Schneidekopf Width of 32 mm provide clearance for a variety of setups while preserving the stiffness required for precise turning. Because the design balances Size and Mass, machinists benefit from improved access in tight work envelopes without sacrificing the mechanical stability needed for fine surface finishes. Who benefits and how to integrate it into your workflow Machine Shops and professional turning operators will appreciate the Turning Holder’s focus on predictable performance and simple handling. Its Right-hand Cutting Direction and 45° geometry make it suitable for common external turning tasks. Integrating this holder into existing tool systems is straightforward when the correct SNMG inserts are used, and maintenance is limited to routine checks of the clamping screws and seating surfaces. For implementation advice tailored to specific machines or materials, expert support is available. Choose Teknik Makina’s Turning Holder to standardise your turning operations and contact METAV Werkzeuge for personalised technical consultation at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D206TM For indexable inserts: SNMG 1906 ISO designation: DSSNR 3232 Secondary designation: P19 Overall Length: 170 mm Width: 40 mm Height: 32 mm Schneidekopf Width: 32 mm Cutting Angle: 45° Cutting Direction: right Weight: 1.383 kg GTIN: 4061905052620 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder from Teknik Makina? The Turning Holder is compatible with SNMG 1906 indexable inserts and follows the DSSNR 3232 ISO designation, ensuring easy replacement and standardised seating for common turning tasks. Can the Teknik Makina Turning Holder be used for heavy-duty turning? Yes, the Turning Holder is designed with increased Rigidity and a 45° Cutting Angle to handle demanding external turning operations while maintaining surface quality under moderate to high cutting loads. How do I mount an insert in this Turning Holder? Insert mounting for the Turning Holder requires seating the SNMG 1906 insert in the pocket, ensuring correct orientation for the Right-hand Cutting Direction, and securing it with the designated clamp and screw specified by Teknik Makina. Who can help if I need technical advice for integrating the Turning Holder? METAV Werkzeuge provides comprehensive technical support for the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised assistance and application recommendations. 170mm DSSNR 3232 Turning Holder for SNMG 1906 Indexable Inserts, 45° - Teknik Makina

Turning Holder (Klemmhalter) for TN-- 1604 Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a robust tool holder designed for TN-- 1604 indexable inserts, offering stable left-hand cutting for precision turning applications. Compatible with TN-- 1604 indexable inserts 170 mm Overall Length for stable reach 32 mm Shank for secure clamping 40 mm Cutting Head for precise insert seating Left-hand Cutting with 93° Cutting Angle Precision and Stability for Demanding Turning Tasks The Holder's 170 mm Overall Length and 32 mm Shank deliver increased rigidity and reduced vibration, which directly improves Surface Finish and extends Insert Life. For workshops that require repeatable results on turned parts, the larger Shank Diameter provides reliable support during heavy cuts and interrupted machining. This stability translates into fewer setup adjustments and more consistent component tolerances, saving time on rework. Secure Insert Seating and Clear Compatibility Designed specifically for TN-- 1604 indexable inserts, the tool features a 40 mm Cutting Head and ISO designation MTJNL 3232, ensuring correct seating and clamping of the insert. The Mounting Interface (P16 reference) simplifies replacement and alignment, reducing downtime when changing Inserts. Customers unfamiliar with TN-- 1604 should note that this designation refers to a standardized insert geometry and size, making it straightforward to source compatible cutting grades for different materials. Optimised for Left-Hand Cutting and Defined Cutting Angle With a 93° Cutting Angle and Left-hand Cutting orientation, this holder is tailored for specific turning operations where tool geometry affects chip flow and tool engagement. The defined angle helps guide chip evacuation away from the workpiece, improving surface integrity on long or slender parts. For shops performing repetitive internal or external turning with left-hand setups, the clear geometric specification eases process planning and toolpath programming. Built for Professional Workshops; Support and Availability The turning tool is supplied by Teknik Makina and is listed as in stock, making it suitable for professional shops and industrial users who need dependable lead times. Routine maintenance is straightforward: ensure clean contact surfaces and correct torque on the clamping screws to maintain repeatable seating. If technical compatibility or specific application data is required, METAV Werkzeuge offers expert consultation and support for selecting the correct holder and insert combination. For reliable left-hand turning with TN-- 1604 inserts we recommend the MTJNL 3232 Turning Holder from Teknik Makina — for technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D336TM Für Wendeschneidplatten: TN-- 1604 Passende Wendeplatten: TN-- 1604 Gesamtlänge: 170 mm ISO Bezeichnung: MTJNL 3232 Bezeichnung 2: P16 Breite: 32 mm Höhe: 32 mm Schneidekopf Breite: 40 mm Schnittwinkel: 93° Schnittrichtung: Left Gewicht: 1.36 kg Verfügbarkeit: in Stock Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder (Klemmhalter) from Teknik Makina? The Turning Holder (Klemmhalter) by Teknik Makina is designed for TN-- 1604 indexable inserts, so use inserts specified as TN-- 1604 to ensure correct fit and secure clamping. Can the Turning Holder (Klemmhalter) from Teknik Makina be used for heavy cuts? Yes, the robust 32 mm Shank and 170 mm Overall Length of the Turning Holder (Klemmhalter) from Teknik Makina provide the rigidity needed for many heavy turning operations when paired with appropriate inserts. Is the MTJNL 3232 designation important when ordering the Turning Holder (Klemmhalter)? Ordering the MTJNL 3232 variant ensures you receive the ISO-specified interface and geometry intended by Teknik Makina for correct insert seating and consistent performance. Who can I contact if I need help selecting the right Turning Holder (Klemmhalter)? If you need assistance choosing the correct Turning Holder (Klemmhalter) or require detailed technical data, METAV Werkzeuge offers expert consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 93° MTJNL 3232 Turning Holder for TN-- 1604, 170mm, left, 32x32mm – Teknik Makina

Turning Holder by Teknik Makina The Turning Holder is a clamping tool for TN-- 1604 indexable inserts, engineered for precise right-hand turning operations in industrial and workshop environments. Turning Holder by Teknik Makina Compatible with TN-- 1604 indexable inserts 170 mm overall length for stable setup 32 x 32 mm shank fits standard toolposts 93° cutting angle for precise, repeatable cuts Precise Turning Performance for Demanding Machining Built to deliver consistent results, this clamping tool offers a 93° cutting angle that supports accurate chip control and repeatable toolpaths. The geometry reduces deflection during heavy cuts, which improves surface finish and dimensional accuracy. For operators who require predictable Turning outcomes, the robust tool geometry directly translates into fewer rework cycles and higher first-pass yield. Straightforward Compatibility Reduces Setup Time Designed specifically for use with TN-- 1604 indexable inserts, the holder ensures quick insert changes and secure seating. The ISO designation MTJNR 3232 and the secondary designation P16 match common toolpost systems, enabling rapid replacement without complex adapters. This compatibility shortens machine downtime and streamlines tool inventory management for production-focused shops. Compact, Stable Design for Reliable Clamping With a shank size of 32 x 32 mm and a cutting-head width of 40 mm, the holder balances stiffness and accessibility at the cutting zone. The 170 mm overall length provides enough reach for most turning setups while maintaining rigidity to resist vibration. These dimensional choices help maintain cutting stability, which is particularly beneficial when machining medium-sized workpieces or when consistent concentricity is required. Who Benefits from This Clamping Solution Recommended for machinists and production engineers, this tool is suited to workshops that run indexable-insert turning operations and seek a durable, easy-to-service holder. The right-hand cutting direction and sturdy construction make it appropriate for standard Turning tasks in metalworking, where repetitive, reliable performance is a priority. We recommend the Teknik Makina Turning Holder as a dependable option for right-hand turning applications; for tailored advice or further technical data, contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Turning Holder Brand: Teknik Makina SKU: D198TM Compatible Indexable Inserts: TN-- 1604 ISO Designation: MTJNR 3232 Secondary Designation: P16 Overall Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Direction: right Cutting Angle: 93° Weight: 1.36 kg GTIN: 4061905151101 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with TN-- 1604 indexable inserts, enabling fast insert changes and secure clamping for standard Turning operations. What are the main dimensions of the Teknik Makina Turning Holder? Dimensions for the Teknik Makina Turning Holder include a 170 mm overall length, a 32 x 32 mm shank, and a 40 mm cutting-head width, designed to balance reach and rigidity. Is the Turning Holder suitable for right-hand cutting only? Yes, the Turning Holder is specified for right-hand cutting direction, making it ideal for setups that require right-hand Turning motions. Who can I contact for technical advice about the Turning Holder? For expert guidance on the Turning Holder, METAV Werkzeuge offers comprehensive consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 170mm MTJNR 3232 Turning Holder for TN-- 1604, 93° Cutting Angle, Right-Hand - Teknik Makina

Klemmhalter — Turning Holder by Teknik Makina The Klemmhalter Turning Holder is a robust clamping solution designed for left-hand turning operations with CNMG 1204 indexable inserts, delivering stable tool engagement and repeatable machining results. For CNMG 1204 indexable inserts 170 mm overall length 95° cutting angle for stable cuts 32 x 32 mm shank for rigid clamping Left-hand cutting direction Robust Construction for Reliable Machining Built for consistent performance, this Turning Holder features the PCLNL 3232 ISO designation and a 170 mm overall Length that supports stable tool Overhang and reduced vibration. Operators benefit from improved surface Finish and longer Insert Life because the design minimizes deflection under load. The compact Schneidkopf Width contributes to predictable chip flow and easier tool setup in confined turret stations. Precise Compatibility and Secure Clamping Engineered specifically for CNMG 1204 Indexable Inserts, the Holder’s 32 mm Shank Width and 32 mm Shank Height ensure Rigid Clamping and repeatable seating of the Insert pocket. This stability translates into consistent Cutting Forces and less rework on turned Parts. Installers will find alignment straightforward, reducing Setup Time and enabling faster spindle ramp-up in production cycles. Cutting Geometry That Improves Cycle Quality With a 95° Cutting Angle and left-hand orientation, the toolholder guides the Insert to deliver predictable chip formation and improved Dimensional Control on internal and external Turning. The geometry is optimised for chip evacuation and steady cutting engagement, which helps maintain tool-edge integrity and consistent surface Finish across longer runs. Ideal Users and Application Scenarios This Turning Holder is aimed at Precision Workshops, CNC Turning Centers, and maintenance teams that demand dependable Turning performance with CNMG Inserts. It suits serial production as well as one-off repair jobs where tool Stability and quick Insert changes matter. Integration into existing toolline setups is straightforward thanks to the standard ISO designation and compact Schneidkopf dimensions. Choose Teknik Makina’s robust Klemmhalter Turning Holder for dependable CNMG 1204 clamping — for technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: P144TM Compatible Inserts: CNMG 1204 ISO Designation: PCLNL 3232 Additional Designation: P12 Overall Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Schneidekopf Breite: 40 mm Cutting Angle: 95° Cutting Direction: left Weight: 1.429 kg GTIN: 4061905149887 EClass: 21181004 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter Turning Holder from Teknik Makina? The Klemmhalter Turning Holder by Teknik Makina is designed for CNMG 1204 indexable inserts, providing precise seating and compatibility with standard CNMG geometries. Is this Turning Holder suitable for left-hand operations only? Yes, the Teknik Makina Klemmhalter Turning Holder is specified for left-hand Cutting Direction and is optimised for stable engagement in such turning applications. What are the key dimensions to check for turret compatibility? Check the Holder’s Overall Length of 170 mm and the Shank dimensions of 32 x 32 mm; these values ensure the Teknik Makina Turning Holder fits common turret setups that accept PCLNL-style toolholders. Can METAV Werkzeuge advise on integrating this Klemmhalter into my toolline? Absolutely, METAV Werkzeuge offers competent technical consultation for the Teknik Makina Klemmhalter Turning Holder—contact them at info@metav-werkzeuge.com or +49 2822 7131930 for tailored support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#P144TM","sku":"P144TM","mpn":"PCLNL 3232","gtin13":"4061905149887","name":"Turning Holder PCLNL 3232 95° PCLN for CNMG Indexable Inserts","description":"170 mm turning holder for CNMG 1204 indexable inserts, 95° cutting angle, left-hand, 32×32 mm head, aluminium construction.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/07/8d/e2/62/62e28d07530023baaa126af2/p136tm-main.jpg"],"author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"PCLN for CNMG Indexable Inserts"},{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Left-Hand Cutting Tools"}],"mentions":[{"@type":"Thing","name":"CNMG 1204 Inserts"},{"@type":"Thing","name":"P12"},{"@type":"Thing","name":"32 mm Width Head"}],"additionalProperty":[{"@type":"PropertyValue","name":"Overall length","value":"170 mm"},{"@type":"PropertyValue","name":"Compatible inserts","value":"CNMG 1204"},{"@type":"PropertyValue","name":"ISO designation","value":"PCLNL 3232"},{"@type":"PropertyValue","name":"Head width","value":"32 mm"},{"@type":"PropertyValue","name":"Head height","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"40 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"95°"},{"@type":"PropertyValue","name":"Cutting direction","value":"Left-hand"},{"@type":"PropertyValue","name":"Weight","value":"1.429 kg"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}],"image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/07/8d/e2/62/62e28d07530023baaa126af2/p136tm-main.jpg"],"dateModified":"2026-04-16T12:00:00+01:00"},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What is the overall length of the holder?","acceptedAnswer":{"@type":"Answer","text":"Overall length 170 mm."}},{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with CNMG 1204 indexable inserts."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 95°."}},{"@type":"Question","name":"Is the holder left- or right-hand?","acceptedAnswer":{"@type":"Answer","text":"This is a left-hand holder."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation PCLNL 3232."}},{"@type":"Question","name":"What are the head dimensions?","acceptedAnswer":{"@type":"Answer","text":"Head width 32 mm and head height 32 mm."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder PCLNL 3232"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"CNMG 1204 Inserts"}]}]}

Turning Holder PCLNR 3232 for CNMG 1204 Indexable Inserts by Teknik Makina The Turning Holder PCLNR 3232 is a robust tool holder designed for precision turning with CNMG 1204 indexable inserts on CNC lathes and manual turning machines. PCLNR 3232 ISO design ensures secure clamping Compatible with CNMG 1204 indexable inserts 170 mm overall length for stable overhang 95° cutting angle for consistent chip control Right-hand orientation for standard turning operations Precision clamping for repeatable results The Turning Holder PCLNR 3232 combines a proven ISO PCLNR 3232 configuration with a focus on Secure Clamping to minimise vibration and ensure repeatable tool position. By accepting CNMG 1204 indexable inserts, the holder allows quick insert changes and consistent tool geometry, which supports stable cutting performance and predictable surface quality. This results in fewer setup iterations and more efficient production runs. Compact dimensions that improve rigidity With an overall Length of 170 mm, a Width of 32 mm and a Height of 32 mm, the holder is engineered to reduce overhang and increase stiffness during turning operations. The Cutting Head Width of 40 mm and a Cutting Height of 30 mm contribute to a rigid interface between insert and holder, helping to extend Insert Life and improve dimensional accuracy. The specified proportions are particularly beneficial where reduced deflection is required. Practical orientation and everyday workshop use Designed for right-hand cutting, the holder's Right-hand configuration and 95° Cutting Angle enable predictable chip flow and clearance for many standard turning tasks. The straightforward ISO mount simplifies retrofitting into existing toolposts and turret systems. If additional technical data or advice is needed to verify fitment or application, METAV Werkzeuge offers competent consultation to support selection and integration. Compatibility explained for quick understanding This holder is specified for CNMG 1204 indexable inserts, indicating the compatible insert Geometry and Seat Dimensions used with many turning applications. The ISO designation PCLNR 3232 identifies the holder style and clamping method as provided by the Manufacturer. For users less familiar with holder nomenclature, the key takeaway is: this product supports widely used CNMG inserts and provides a stable, ISO-standard mounting for efficient turning operations. Strong recommendation: The Turning Holder from Teknik Makina is an excellent choice when stable, repeatable turning is required — for further technical advice or to confirm suitability, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Brand: Teknik Makina SKU: P134TM Alternate designation: PCLN for CNMG Indexable Inserts Compatible inserts: CNMG 1204 Overall length: 170 mm Weight: 1.429 kg ISO designation: PCLNR 3232 Secondary designation: P12 Width: 32 mm Height: 32 mm Cutting head width: 40 mm Cutting height: 30 mm Cutting direction: right Cutting angle: 95° GTIN: 4061905149849 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PCLNR 3232 by Teknik Makina and what does that mean? The Turning Holder PCLNR 3232 by Teknik Makina is designed for CNMG 1204 indexable inserts, which means the holder accepts inserts with that seat and thickness specification to ensure correct clamping and cutting geometry. Is the Turning Holder PCLNR 3232 suitable for CNC lathe use? Yes, the Turning Holder PCLNR 3232 from Teknik Makina is suitable for CNC lathe operations; its 170 mm overall length and rigid ISO design provide the stability needed for precision turning tasks. Can the Turning Holder PCLNR 3232 be used for left-hand turning? The Turning Holder PCLNR 3232 by Teknik Makina is specified with a right-hand cutting direction; for left-hand operations, a corresponding left-hand holder should be selected. Where can I get technical support for the Turning Holder PCLNR 3232 from Teknik Makina? For technical support or to confirm that the Turning Holder PCLNR 3232 by Teknik Makina meets specific application requirements, contact METAV Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. 170mm PCLN Turning Holder for CNMG 1204 Inserts, 95° - Teknik Makina

Turning Holder PDJNR 3232 — Clamping Holder for DNMG 1506 Indexable Inserts by Teknik Makina A Turning Holder PDJNR 3232 engineered for DNMG 1506 indexable inserts, providing robust clamping and precise right-hand cutting at a 93° angle. Compatible with DNMG 1506 indexable inserts Overall length 170 mm for extended reach Right-hand cutting with 93° cutting angle Internal coolant for improved tool life ISO designation PDJNR 3232 for straightforward selection Precision Clamping for Consistent Turning Results The PDJNR 3232 design focuses on secure clamping to minimize vibration and maintain repeatable tolerances. With a solid clamping geometry and a 40 mm cutting-head width, this holder stabilizes the insert during heavy cuts so operators achieve consistent surface finish and dimensional accuracy. The direct benefit is fewer rejects and extended insert life, translating into measurable productivity gains on turning operations. Built for Productivity and Simple Setup This clamping holder, with an overall length of 170 mm and a 32 mm width and height, offers a balance of reach and rigidity that supports medium-duty to demanding turning tasks. The right-hand cutting orientation and 93° cutting angle provide predictable chip flow and accessibility in common setups. Users will appreciate the straightforward ISO PDJNR 3232 interface that simplifies tooling changes and reduces machine downtime. Ideal for Professional Workshops and Job Shops Designed by Teknik Makina, this Turning Holder suits machinists, toolroom technicians and production shops that use DNMG 1506 inserts and require reliable, repeatable setups. The compact dimensions and robust construction mean the holder is appropriate for serial production as well as repair and maintenance work where dependability and compatibility are priorities. Installation, Cooling and Compatibility Notes The holder is supplied with internal coolant capability, allowing through-tool coolant to reach the cutting zone and improve chip evacuation and tool life. It is explicitly matched to DNMG 1506 inserts and marked with the ISO code PDJNR 3232; ensure the insert geometry and clamping screw match your existing tooling. Right-hand cutting orientation must be selected for corresponding lathe setups to achieve intended cutting direction and chip control. Trust Teknik Makina’s Turning Holder PDJNR 3232 for robust, high-precision turning—for personalised technical advice and assistance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications Bezeichnung: Turning Holder Marke: Teknik Makina SKU: P114TM ISO designation: PDJNR 3232 Compatible inserts: DNMG 1506 Overall length: 170 mm Weight: 1.384 kg Internal coolant: with internal coolant Secondary designation: P15 Width: 32 mm Height: 32 mm Cutting head width: 40 mm Cutting direction: right Cutting angle: 93° GTIN: 4061905149771 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PDJNR 3232 from Teknik Makina? The Turning Holder PDJNR 3232 by Teknik Makina is designed to accept DNMG 1506 indexable inserts; ensure the insert size and chipbreaker match your application for optimal performance. Does the Teknik Makina Turning Holder PDJNR 3232 support coolant-through operation? Yes, the Teknik Makina Turning Holder PDJNR 3232 includes internal coolant capability to improve chip evacuation and tool life when used with appropriate machine coolant supply. Is the PDJNR 3232 suitable for heavy-duty turning operations? The PDJNR 3232 Turning Holder from Teknik Makina, with its 170 mm length and robust clamping geometry, is suited for medium to heavy-duty tasks where rigidity and reliable insert clamping are required. Who can help if I need technical advice for the Turning Holder PDJNR 3232? METAV Werkzeuge offers detailed consultation for the Turning Holder PDJNR 3232 by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support. 170mm PDJNR 3232 Turning Holder for DNMG 1506, 93° Right, Internal Coolant - Teknik Makina

Klemmhalter (Turning Holder) by Teknik Makina The Klemmhalter (Turning Holder) is a precision toolholder designed for machining with VBMT 1604 indexable inserts, offering stable clamping and consistent cutting performance for turning applications. Compatible with VBMT 1604 indexable inserts Overall Length 170 mm for stable overhang ISO SVJBR 3232 clamping design 93° Cutting Angle for precise turning Right-hand orientation with robust construction Engineered for dependable indexable insert turning The holder is engineered to secure VBMT 1604 inserts with repeatable accuracy, reducing setup time and ensuring consistent tool geometry across batches. Its clamping concept, based on the SVJBR 3232 ISO designation, provides firm seating of the insert and reliable bite during interrupted cuts. This leads to improved process stability and fewer rejects in series production for workshops and contract manufacturers. Geometry that improves surface finish and tool life A defined 93° Cutting Angle and a 40 mm Schneidekopf width contribute to predictable chip flow and reduced cutting forces. By translating these geometric features into lower vibration and better heat distribution, operators achieve a finer surface finish with less rework. This technical configuration supports efficient material removal while helping extend the life of both the insert and the holder. Compact dimensions with high rigidity With an Overall Length of 170 mm and body dimensions of 32 mm width and 32 mm height, the holder balances accessibility and stiffness for a wide range of turning tasks. The compact profile minimizes overhang while providing the necessary clearance for close-to-shoulder machining. As a consequence, tool deflection is reduced and repeatability in tight-tolerance operations is enhanced. Designed for professional workshops and demanding applications This Turning Holder is aimed at machinists, toolroom technicians and small to medium production environments that require reliable indexable insert solutions. The right-hand orientation and robust construction make the component suitable for general-purpose turning as well as tougher interrupted-cut conditions. For customized setups or compatibility checks with specific inserts or machines, support is available from the supplier. Choose the Teknik Makina Klemmhalter for precise, repeatable turning performance and contact METAV Werkzeuge for individual technical advice and application support — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Data Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D238-1TM For Indexable Inserts: VBMT 1604 Suitable Inserts: VBMT 1604 Overall Length: 170 mm Weight: 1.37 kg ISO Designation: SVJBR 3232 Secondary Designation: P16 Width: 32 mm Height: 32 mm Schneidekopf Width: 40 mm Cutting Direction: right Cutting Angle: 93° GTIN: 4061905153662 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Klemmhalter by Teknik Makina Turning Holder? The Klemmhalter by Teknik Makina is compatible with VBMT 1604 indexable inserts and is specifically designed to hold these inserts securely in an SVJBR 3232 clamping arrangement for consistent machining. Can the Klemmhalter Turning Holder be used for heavy interrupted cuts? Yes, the Teknik Makina Klemmhalter Turning Holder has a robust construction, a compact 170 mm length and a 93° cutting angle, which together support good rigidity and make it suitable for many interrupted-cut scenarios. How does the SVJBR 3232 designation affect use of the Klemmhalter? The SVJBR 3232 designation defines the clamp geometry and seating for the Klemmhalter; this ensures correct seating of VBMT 1604 inserts and helps maintain repeatable cutting geometry during production. Where can I get technical advice or check machine compatibility for the Klemmhalter? For tailored technical advice regarding the Klemmhalter Turning Holder by Teknik Makina, contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 — their team provides competent consultation for tool selection and application. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D238-1TM","sku":"D238-1TM","mpn":"D238-1TM","gtin13":"4061905153662","name":"Turning Holder SVJBR 3232 93° VBMT 1604","description":"SVJB for VBMT indexable inserts; 170 mm overall length, 93° cutting angle, right-hand, aluminium construction; suitable for VBMT 1604 inserts.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/43/07/35/64/64350743edeb9298707ad03d/d230tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2a/7e/de/62/62de7e2a0f56dbb4de4dbeea/d230tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/ce/7e/de/62/62de7ece33927e49dbf32777/d230tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Inserts","value":"VBMT 1604"},{"@type":"PropertyValue","name":"Overall Length","value":"170 mm"},{"@type":"PropertyValue","name":"Weight","value":"1.37 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJBR 3232"},{"@type":"PropertyValue","name":"Type","value":"SVJB for VBMT Indexable Inserts"},{"@type":"PropertyValue","name":"Shank","value":"P16"},{"@type":"PropertyValue","name":"Width","value":"32 mm"},{"@type":"PropertyValue","name":"Height","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"40 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"VBMT 1604 inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 170 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93°."}},{"@type":"Question","name":"Is the holder right- or left-hand?","acceptedAnswer":{"@type":"Answer","text":"The holder is right-hand."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation is SVJBR 3232."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SVJBR 3232"},{"@type":"Thing","name":"Allround Turning Applications"},{"@type":"Thing","name":"Compatible with VBMT 1604"}],"mentions":[{"@type":"Thing","name":"P16 Shank"},{"@type":"Thing","name":"SVJB for VBMT Indexable Inserts"},{"@type":"Thing","name":"93° Cutting Angle"}]}]}

Introducing Turning Holder DCLNL 3232 by Teknik Makina The Turning Holder is a robust clamping solution for CN-- 1906 indexable inserts, designed for left-hand turning operations and precise metalcutting applications. Turning Holder by Teknik Makina Fits CN-- 1906 indexable inserts 170 mm overall length for deep reach 95° cutting angle for precise engagement 32 x 32 mm shank with 40 mm head width Precision and Stability for Demanding Turning Tasks For machining operations that demand repeatable results, this toolholder delivers Precision and Stability through its ISO designation DCLNL 3232 and compatibility with CN-- 1906 inserts. The 95° cutting angle promotes predictable tool engagement, which reduces unwanted deflection and helps maintain consistent surface finish. As a result, tool life and workpiece quality benefit from reduced vibration and controlled chip flow, supporting efficient production cycles. Design features that increase reach and rigidity Built with a 170 mm overall length and a compact shank of 32 x 32 mm, the holder balances reach and rigidity for external turning or operations that require deeper access. The 40 mm cutter-head width provides a stable mounting area for the insert seat, simplifying setup and alignment. These dimensional choices enable secure clamping and make the toolholder suitable for job-shop environments where quick, reliable positioning is essential. Practical handling for workshop versatility Designed for left-hand cutting direction, the holder accepts indexable inserts and allows rapid insert changes without complex adjustments. The clamping concept and the ISO coding streamline replacement and inventory management, so technicians spend less time setting up tools and more time on productive machining. This practical approach supports both single-part manufacturing and small-batch production runs. Clear compatibility and application advice This toolholder is intended for turning operations that use CN-- 1906 indexable inserts and benefits installations where a defined cutting angle and solid clamping interface matter. The ISO code and second designation P19 assist in selecting matching components and spare parts. For users seeking reliable interchangeability and straightforward identification, the standardized designation makes procurement and maintenance simpler. We recommend Teknik Makina’s Turning Holder for precision turning tasks — for expert advice and to confirm suitability please contact METAV Werkzeuge at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271 Turning Holder Manufacturer: Teknik Makina SKU: D307TM Compatible Inserts: CN-- 1906 Overall Length: 170 mm Weight: 1.43 kg ISO Designation: DCLNL 3232 Secondary Designation: P19 Shank Width: 32 mm Shank Height: 32 mm Cutter Head Width: 40 mm Cutting Angle: 95° Cutting Direction: left GTIN: 4061905151477 Manufacturer or Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person or Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina and what should I consider? The Turning Holder from Teknik Makina is designed for CN-- 1906 indexable inserts; ensure the insert geometry and grade match the intended material and the left-hand cutting setup to achieve optimal performance. Can the Turning Holder by Teknik Makina be used for deep shoulder turning? Yes, the Turning Holder by Teknik Makina, with its 170 mm overall length and 32 x 32 mm shank, is suitable for operations that require extended reach, provided CN-- 1906 inserts are appropriate for the task. How does the DCLNL 3232 designation help with selecting tooling? The ISO designation DCLNL 3232 on this Turning Holder identifies shank size and mounting style, simplifying the selection of compatible holders and spare parts when ordering from Teknik Makina or suppliers. Who can I contact if unsure whether the Turning Holder meets my requirements? If you are unsure whether the Turning Holder from Teknik Makina fits your requirements, METAV Werkzeuge offers expert consultation — reach out via info@metav-werkzeuge.com or call +49 2822 7131930 for personalized support. 95° Left-Cut Turning Holder DCLNL 3232 for CN-- 1906, 170mm Length - Teknik Makina

Turning Holder (DDNNN for DN-- 1506 Indexable Inserts) by Teknik Makina A Turning Holder designed for secure clamping of DN-- 1506 indexable inserts, offering extended reach and consistent performance in metal turning applications. Compatible with DN-- 1506 indexable inserts ISO designation DDNNN 3232 for secure fit 170 mm overall length for extended reach 62.5° cutting angle for improved chip flow Compact design for stable turning performance The Turning Holder is engineered to deliver reliable rigidity during cutting, reducing chatter and improving surface finish. Its compact cross-section and precise machining ensure consistent contact between insert and workpiece, which translates into repeatable dimensional accuracy. This stability benefits short to medium production runs by lowering rework rates and increasing throughput. Precise compatibility and cutting geometry that aids productivity Built to accept DN-- 1506 indexable inserts with the ISO DDNNN 3232 designation, the holder’s 62.5° cutting angle promotes controlled chip formation and efficient evacuation. For users less familiar with tool geometry, a steeper cutting angle helps prevent built-up edge and supports smoother cutting on a variety of steels, resulting in longer effective insert life and more predictable machining cycles. Designed for workshops and production-oriented shops Workshops and OEM maintenance teams benefit from the holder’s straightforward specification and robust design. The 32 x 32 mm shank cross-section and clear designation reduce setup confusion and allow fast tool changes, lowering machine downtime. By focusing on secure clamping and reproducible positioning, the holder supports consistent part quality across batch runs and small-series production. Simple mounting and service for everyday use Assembly and insert replacement follow common industry practices, with the tool accepting the listed insert type and using the P15 clamping interface for reliable fixation. The 16 mm cutting head width provides a balance between rigidity and access for varied turning tasks, while maintenance mainly involves routine inspection and torque checks, keeping overhead low and tool availability high. For precision turning needs, trust Teknik Makina’s clamping expertise — contact METAV Werkzeuge for tailored advice and support at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Brand / Manufacturer: Teknik Makina SKU: D109TM Suitable Inserts: DN-- 1506 Indexable Inserts ISO Designation: DDNNN 3232 Overall Length: 170 mm Width: 32 mm Height: 32 mm Cutting Head Width: 16 mm Cutting Angle: 62.5° Shank Designation: P15 Weight: 1.29 kg GTIN: 4061905150777 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed for DN-- 1506 indexable inserts, using the ISO DDNNN 3232 interface to ensure correct fit and secure clamping. What advantage does the 62.5° cutting angle of the Turning Holder provide? A 62.5° cutting angle supports improved chip flow and reduced built-up edge, which helps the Teknik Makina Turning Holder deliver more consistent surface finishes and longer insert life on common machining materials. Is the Turning Holder suitable for production environments? Yes, the Turning Holder by Teknik Makina is intended for workshop and production use, offering reproducible clamping and dimensions that reduce setup time and support batch machining. Who can I contact for technical questions about the Turning Holder? For technical assistance with the Turning Holder, METAV Werkzeuge provides expert support — reach out via info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice. 62.5° DDNNN 3232 Turning Holder for DN-- 1506 Indexable Inserts, 170 mm Length - Teknik Makina

Turning Holder (DCLN for CN-- Indexable Inserts) by Teknik Makina The Turning Holder DCLN for CN-- Indexable Inserts is a precision clamping tool engineered for right-hand turning with CN-- 1204 indexable inserts, offering robustness and repeatable geometry for metalworking applications. Fits CN-- 1204 indexable inserts Total length 170 mm for stable reach ISO designation DCLNR 3232 for compatibility 95° cutting angle for reliable cutting geometry Right-hand orientation for standard turning Stable clamping and durable construction for consistent results Designed for professional use, this toolholder provides a rigid clamping solution that maintains insert position under load. The DCLN design secures CN-- 1204 inserts with an ISO DCLNR 3232 interface, ensuring consistent tool geometry and repeatability across runs. For operators, this means fewer interruptions for adjustment and improved surface finish consistency. The 40 mm wide cutting head distributes forces effectively, reducing vibration and contributing to longer insert life. Optimised for workshop turning tasks with clear compatibility Workshops requiring reliable right-hand turning will benefit from the holder’s straightforward fitment and industry-standard dimensions. With a total length of 170 mm and a compact 32 mm × 32 mm shank, the tool balances reach and rigidity, enabling access to tighter bores while maintaining stability. Beginners can note that “indexable inserts” are replaceable cutting tips; they allow fast tool renewal without regrinding the entire tool, which increases uptime and simplifies inventory management. Precise geometry and simple setup reduce downtime The 95° cutting angle provides a controlled cutting edge orientation that supports predictable chip formation and tool engagement. Installation follows common clamping routines for DCLN systems: seat the insert, secure the clamp screw, and verify the axial alignment. Because the holder is produced to ISO designation DCLNR 3232, it integrates with existing toolpost setups and collet systems, minimising setup complexity and ensuring interchangeability in multi-tool operations. Choose Teknik Makina’s precision toolholding for dependable turning performance — for personalised advice or to confirm technical suitability, contact METAV Werkzeuge via eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or WhatsApp at +49 170 2837271 Technical Specifications Bezeichnung: Turning Holder Brand: Teknik Makina SKU: D164TM Suitable indexable inserts: CN-- 1204 Total length: 170 mm Weight: 1.379 kg ISO designation: DCLNR 3232 Secondary designation: P12 Shank width: 32 mm Shank height: 32 mm Cutting head width: 40 mm Cutting direction: Right Cutting angle: 95° GTIN: 4061905151354 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed to accept CN-- 1204 indexable inserts; these inserts match the DCLN clamping geometry and ensure correct seating and cutting orientation. Is the Turning Holder suitable for heavy-duty turning operations? Teknik Makina’s Turning Holder offers a robust clamp and a 40 mm cutting head width that help absorb cutting forces; for very heavy-duty removal rates, verify machine power and insert grade to match the intended application. How do I install an insert in the DCLN Turning Holder? To fit an insert in the Turning Holder, place a CN-- 1204 insert into the pocket, align it with the locating features, then tighten the clamp screw to the manufacturer’s recommended torque; this secures the insert for right-hand turning. Can METAV Werkzeuge provide additional technical advice for the Turning Holder? Yes, METAV Werkzeuge offers competent consultation for Teknik Makina toolholders; contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support and compatibility checks. 170mm DCLNR 3232 Turning Holder for CN-- 1204 Indexable Inserts, 95° - Teknik Makina

Turning Holder — Klemmhalter DCLNR 3232 by Teknik Makina The Klemmhalter Turning Holder secures CN-- 1906 indexable inserts for precise right-hand turning across workshop and production applications. DCLNR 3232 compatible with CN-- 1906 inserts 170 mm overall length for extended reach 95° cutting angle for optimal chip control 32 mm tool shank width and height for rigidity Right-hand orientation for standard turning operations Secure Seating for Repeatable Precision The Turning Holder is engineered to give a stable and vibration-resistant seat for indexable inserts. By combining the DCLNR 3232 ISO interface with a robust clamping geometry, the tool reduces micro-movements at the Insert and improves surface finish consistency. This design lowers the need for frequent re-adjustment and supports reliable results during medium- to high-volume turning tasks. Geometry That Delivers Stability and Reach With an overall length of 170 mm and a tool shank dimension of 32 mm x 32 mm, the holder provides the balance between reach and stiffness required in many turning operations. The 40 mm cutting-head width and the 95° cutting angle are optimized to maintain chip flow and tool clearance, while the right-hand orientation fits conventional lathe setups. These geometric choices translate into measurable improvements in tool life and process stability. Built for Workshop Use and Professional Machining This clamping tool targets machinists and production engineers who require dependable tooling for turning with CN-- 1906 inserts. The compact footprint and standardized ISO interface make the holder suitable for retrofit in existing toolposts and turret systems. For job shops and manufacturers seeking consistent cycle times, the holder supports repeatability without complex adjustments. Easy Handling, Clear Compatibility Installation is straightforward: the holder accepts CN-- 1906 indexable inserts and uses the clamping screw designation P19, ensuring a secure fit. For context, CN-- 1906 denotes a common Insert geometry and size used across many turning applications; choosing the correct grade and coating of the insert adapts the setup to material and cutting conditions. Proper seating and torque on the clamping screw provide best performance and safety during operation. Choose the Teknik Makina Klemmhalter for reliable precision in right-hand turning — for tailored advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271. Technical Data Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D166TM Compatible Inserts: CN-- 1906 ISO Designation: DCLNR 3232 Overall Length: 170 mm Tool Shank Width: 32 mm Tool Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Angle: 95° Cutting Direction: Right-hand Clamping Screw Designation: P19 Weight: 1.43 kg Availability: in Stock Condition: new GTIN: 4061905151392 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and what does CN-- 1906 mean? The Turning Holder (Klemmhalter) by Teknik Makina is designed for CN-- 1906 indexable inserts; CN-- 1906 denotes a standard insert shape and size used for a range of turning tasks, making it easy to source compatible grades for different materials. Is the Klemmhalter DCLNR 3232 suitable for heavy-duty turning? The Klemmhalter DCLNR 3232 from Teknik Makina offers a 32 mm shank and a solid clamping geometry that provide good rigidity; while it supports demanding operations, suitability for heavy-duty cutting depends on machine setup and chosen insert grade. How do I install the Teknik Makina Turning Holder and which clamping screw is required? Installation follows standard practice: secure the holder in the toolpost, use the specified P19 clamping screw to fix the insert, and ensure correct torque so the Klemmhalter functions reliably and safely during turning. Can METAV Werkzeuge advise on the right insert grade for the Klemmhalter? Yes — METAV Werkzeuge provides expert consultation for the Klemmhalter Turning Holder by Teknik Makina; contact their team for recommendations on insert grades, coatings and cutting data tailored to your material and process. 95° DCLNR 3232 Turning Holder for CN-- 1906 Inserts, 170mm - Teknik Makina

Introducing the Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder (Klemmhalter) DDJNL 3232 is a robust clamping tool designed for precision external turning with DN-- 1506 indexable inserts. Turning Holder DDJNL 3232 from Teknik Makina For DN-- 1506 indexable inserts Overall length 170 mm for stable support Shank width 32 mm and height 32 mm for rigidity 93° cutting angle for accurate profile turning Consistent Precision through Stable Clamping The specially engineered clamping mechanism delivers consistent precision by holding DN-- 1506 indexable inserts firmly in position. With a 93° cutting angle, the tool minimizes deflection during external turning operations, which reduces tool chatter and improves surface finish. For customers unfamiliar with indexable tooling: indexable inserts are replaceable cutting tips that allow fast tool renewal without regrinding the holder, lowering downtime and keeping machining tolerances tight. Dimensions that Enhance Rigidity and Tool Life A shank width of 32 mm and height of 32 mm combined with an overall length of 170 mm provide a balanced profile that enhances rigidity during cuts. The cutter head width of 40 mm supports stable seating of the insert, translating into longer insert life and fewer interruptions for tool changes. These dimensions make the holder suitable for machines where stiffness and repeatable positioning are crucial factors. Designed for Clear Compatibility and Practical Use This turning holder is specified for DN-- 1506 inserts and carries the ISO designation DDJNL 3232, ensuring straightforward identification and replacement within a standardized tooling system. The left-hand cutting direction suits common external turning setups; choose the correct orientation for your machine spindle. Use this holder for finishing and semi-finishing passes where predictable chip control and dimensional accuracy are required. Easy Integration and Professional Support for Complex Needs Installation is straightforward when matched with the corresponding DN-- 1506 inserts, and the holder’s ISO code facilitates inventory and setup procedures in professional workshops. If uncertainties remain about fitment or application scenarios, METAV Werkzeuge provides expert consultation to help select the right configuration and achieve optimal machining results. Strongly recommended for demanding turning tasks: select the Turning Holder DDJNL 3232 from Teknik Makina for superior stability and repeatable accuracy — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Specifications Turning Holder Brand / Manufacturer: Teknik Makina SKU: D314TM Compatible Inserts: DN-- 1506 Suitable For Inserts: DN-- 1506 Overall Length: 170 mm Weight: 1.345 kg ISO Designation: DDJNL 3232 Secondary Designation: P15 Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Angle: 93° Cutting Direction: left GTIN: 4061905150746 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is specified for DN-- 1506 indexable inserts; the DDJNL 3232 ISO designation ensures compatibility with standard DN-- 1506 cutting tips. Is the Turning Holder suitable for heavy-duty turning? The Turning Holder DDJNL 3232 features a 32 mm shank width and 32 mm height with a 170 mm overall length, offering enhanced rigidity that is beneficial for demanding external turning operations. Where can I get technical advice for using the Turning Holder by Teknik Makina? For application-specific guidance and recommendations on the Turning Holder by Teknik Makina, METAV Werkzeuge provides expert consultation via info@metav-werkzeuge.com or phone +49 2822 7131930. 170mm Turning Holder DDJNL 3232 for DN-- 1506 Indexable Inserts, 93° Left, 32x32 mm, Teknik Makina

Turning Holder (Klemmhalter) — PDJNL 3232 for DNMG 1506 Inserts by Teknik Makina The Turning Holder (Klemmhalter) PDJNL 3232 secures DNMG 1506 indexable inserts for precise left-hand turning tasks in professional metalworking environments. Compatible with DNMG 1506 inserts 170 mm Overall Length for extended reach Internal Coolant for improved chip evacuation Robust 32 x 32 mm Shank for stable clamping 93° Cutting Angle for consistent cutting geometry Precision clamping that improves repeatability The PDJNL 3232 Turning Holder delivers secure clamping for DNMG 1506 inserts, minimising insert movement and vibration during cuts. Its clamping concept reduces the risk of insert shift, which directly supports consistent surface finish and longer Insert Life. The controlled 93° Cutting Angle contributes to predictable cutting forces and reliable chip formation, making setups more reproducible across batches. Internal coolant and mechanical stability increase tool life Equipped with Internal Coolant, this clamping tool helps direct coolant to the cutting edge for better lubrication and chip control, reducing thermal load and edge wear. The 32 mm by 32 mm Shank cross-section provides high rigidity, decreasing chatter and enabling higher feeds where the workpiece and machine allow. Together these features support longer service intervals and fewer unplanned tool changes. Versatile length and head geometry for workshop needs With a 170 mm Overall Length and a 40 mm wide cutting head, the holder balances Reach and Stability for common turning operations. The design suits small and medium-sized job shops and CNC turning centres that require dependable Left-Hand turning solutions. The straightforward mounting geometry simplifies integration into existing tool turrets without complex adaptations. Industry-standard designation for easy specification The ISO designation PDJNL 3232 identifies the holder's interface and shank dimensions, simplifying specification and procurement when matching to DNMG 1506 inserts and compatible toolholders. Clear technical specifications and standardised interfaces reduce setup time and help ensure the holder fits into established machining processes without unexpected modifications. Highly recommended for professional turning applications: choose the Teknik Makina Turning Holder for reliable DNMG 1506 performance — for expert advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Specifications Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: P126TM Suitable Inserts: DNMG 1506 ISO Designation: PDJNL 3232 Alternate Designation: P15 Overall Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Height: 38 mm Cutting Direction: Left Cutting Angle: 93° With Internal Coolant: Yes Weight: 1.384 kg GTIN: 4061905149801 Availability: In Stock Condition: New Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina? The Teknik Makina Turning Holder (Klemmhalter) is specified for DNMG 1506 indexable inserts; using the correct DNMG 1506 grade ensures proper seating, clamping and optimal cutting performance. Does the holder support coolant-through operation? Yes, the Teknik Makina Turning Holder features Internal Coolant, allowing coolant to reach the cutting edge for improved chip control and reduced thermal stress on the DNMG 1506 inserts. Can this holder be used for left-hand turning only? The PDJNL 3232 design is configured for Left cutting direction; it is intended for left-hand turning operations where the specified geometry and cutting angle deliver stable performance. Who can I contact for technical advice on this Turning Holder? For detailed application support regarding the Teknik Makina Turning Holder, METAV Werkzeuge offers expert consultation — email info@metav-werkzeuge.com or call +49 2822 7131930, and WhatsApp +49 170 2837271. 93° Turning Holder 170mm for DNMG 1506, Left, PDJNL 3232 - Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a robust tool holder designed for right-hand turning with KNUX 1604 indexable inserts, delivering stable clamping and precise cutting in metalworking applications. Turning Holder for KNUX 1604 indexable inserts 170 mm overall length for stable support ISO designation CKJNR 3232 for easy matching Right-hand cutting with 93° cutting angle 40 mm cutter head width for precise seating Built for stable, accurate clamping The Turning Holder from Teknik Makina features a solid construction that provides consistent support during machining. With an overall length of 170 mm and a cutter head width of 40 mm, the tool holder reduces vibration and improves surface finish, so each pass delivers reliable dimensional accuracy. This stability translates directly into fewer reworks and improved component quality for series production. Optimised for KNUX 1604 indexable inserts Designed specifically for KNUX 1604 indexable inserts and bearing the ISO designation CKJNR 3232, this holder ensures correct seating and repeatable positioning of the cutting edge. The clear ISO reference simplifies tool selection and replacement, making setup faster and reducing the risk of incorrect assembly. For users unfamiliar with ISO codes, CKJNR 3232 indicates the holder geometry and clamping style compatible with common turning tool setups. Efficient cutting geometry for right-hand operations The holder’s 93° cutting angle and right-hand cutting orientation support effective chip control and predictable cutting forces. This geometry helps maintain tool life and enables consistent machining of turned parts under varying feed and speed conditions. By combining correct cutting direction with a robust clamping interface, the holder contributes to stable tool performance and enhanced productivity on turning lathes. Who benefits from this tool holder Manufacturers and workshop technicians who work with indexable turning inserts will value the Turning Holder’s compatibility and repeatability. It is suitable for industrial turning applications where setup speed, interchangeability, and process stability matter. If processes require fast changeovers and standardised tooling, this holder integrates well into toolrooms and production lines that prioritise uptime and reproducible results. We recommend Teknik Makina tooling for reliable turning performance — for personalised advice or additional technical data contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: RD013TM For indexable inserts: KNUX 1604 ISO designation: CKJNR 3232 Shank designation: P16 Overall length: 170 mm Width: 32 mm Height: 32 mm Cutter head width: 40 mm Cutting direction: Right Cutting angle: 93° Weight: 1.311 kg GTIN: 4061905052767 Availability: In Stock Condition: New Label: Klemmhalter CKJNR 3232 93° KNUX 1604 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is made for KNUX 1604 indexable inserts; the holder’s geometry and ISO designation CKJNR 3232 ensure proper seating and compatibility with that insert type. Can I use this Turning Holder for left-hand cutting? This specific Turning Holder is configured for right-hand cutting with a 93° cutting angle; for left-hand operations, refer to other Teknik Makina holders designed for that orientation. How does the Turning Holder improve machining stability? By combining a 170 mm overall length with a 40 mm cutter head width and rigid clamping, the Turning Holder reduces vibration and provides repeatable positioning, resulting in improved surface finish and tool life. Who can I contact for technical questions about the Turning Holder? For detailed application support or additional technical data about the Turning Holder from Teknik Makina, METAV Werkzeuge offers expert advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930. 93° Turning Holder CKJNR 3232 for KNUX 1604 Indexable Inserts, 170mm Length - Teknik Makina