Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact, serviceable design that combines 14 mm cutting diameter, 16 mm shank stability and easy insert changes for efficient, repeatable milling; order directly via Metav Werkzeuge or request technical advice from our consultants. Shank cutter S226TM — indexable-insert cutter for APMT 11T3, 14 mm Ø (Teknik Cutting Tools) A robust Shank cutter S226TM engineered for slotting and peripheral milling with APMT 11T3 indexable inserts, suitable for light-to-medium machining where secure clamping and fast insert changes are essential 14 mm cutting diameter 16 mm shank for secure clamping Compatible with APMT 11T3 Korloy inserts 25 mm effective cutting length Consistent machining through stable tool geometry The S226TM provides stable, repeatable performance thanks to its 16 mm shank and compact 90 mm overall length, which reduce vibration and improve surface finish. A well-dimensioned shank promotes consistent clamping in standard toolholders, lowering run-out and increasing reproducibility in serial production. The tool’s 14 mm cutting diameter and single cutting edge deliver predictable chip formation; this is particularly valuable when part tolerance and surface integrity matter, as the cutter’s geometry helps maintain dimensional control across repeated cycles. Fast, economical insert system for reduced downtime Designed for indexable inserts, the S226TM accepts APMT 11T3 plates and is compatible with Korloy inserts, allowing quick replacement without regrinding. The clamping uses a Torx M2.5×5.5 screw tightened with a T8 key, enabling secure fixation and simple on‑bench servicing. This arrangement reduces machine downtime and toolholder handling compared with solid cutters: when an edge wears, the insert is changed in seconds rather than replacing the entire tool. The result is lower running cost per part and a faster return on tooling investment. Geometry tuned for shoulder and slot milling With a 90° cutting angle and 25 mm effective cutting length, the cutter is optimised for perpendicular cuts and shoulder work where clean, square faces are required. The single cutting edge minimises chipping risks on tough feeds, and the head design supports clear chip evacuation in many ferrous and non-ferrous operations. For engineers and workshop planners, the S226TM translates cutting geometry into tangible benefits: reduced rework, improved cycle-time predictability and simpler process setup for repetitive milling tasks. Built for the shop floor — serviceable and traceable The S226TM’s moderate weight (0.139 kg) and compact dimensions make it straightforward to handle and store, while its indexable design keeps maintenance predictable and traceable. The tool’s compatibility with established insert sizes and common Torx clamping means spare parts and replacement inserts are widely available, simplifying procurement and inventory planning. Supplied by Teknik Cutting Tools and distributed via Metav Werkzeuge, the cutter fits into a broader supply chain aimed at dependable delivery and consistent quality for industrial workshops. For ordering or specification support on the Teknik Cutting Tools shank cutter S226TM, contact Metav Werkzeuge for local availability and expert advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S226TM Brand: Teknik Cutting Tools Product type: Shank cutter for indexable inserts Compatible inserts: APMT 11T3 Core data Cutting diameter: 14 mm Shank diameter: 16 mm Effective cutting length: 25 mm Overall length: 90 mm Weight: 0.139 kg Cutting angle: 90° Number of cutting edges: 1 Special features Compatible insert manufacturer: Korloy Torx screw: M2.5×5.5 Required Torx key: T8 Indexable-insert system for fast replacement Suitable for light-to-medium machining FAQ Which inserts fit the S226TM? The S226TM accepts APMT 11T3 indexable inserts; Korloy‑spec inserts are listed as compatible and match the cutter’s seat geometry. How is the insert secured in the cutter? Insert clamping is achieved with a Torx M2.5×5.5 screw, tightened using a T8 key for secure fixation and quick changeover. What machining tasks is this cutter best suited to? The cutter is intended for slotting and shoulder milling in light‑to‑medium duty operations where a 14 mm diameter and 25 mm cutting length provide the required engagement and surface finish. Is the S226TM suitable for high‑speed applications? The S226TM is optimised for stable cutting at practical workshop speeds; check machine and insert recommendations for high‑speed limits to ensure safe, efficient operation. How many cutting edges does the tool have and what is the benefit? The tool has a single cutting edge, which simplifies chip control and reduces the risk of chipping at higher feeds, making it suitable for demanding shoulder cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, robust shank design and easy insert replacement to keep machining cycles efficient and predictable; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. 14 mm Shank Milling Cutter S226-1TM – Insert milling cutter with internal coolant for APMT 11T3 14 mm shank milling cutter S226-1TM designed for indexable milling with APMT 11T3 inserts, delivering compact rigidity and serviceable coolant supply for demanding workshop use 14 mm cutter diameter, L90 mm overall Internal coolant for improved tool life Compatible with APMT 11T3 indexable inserts 16 mm shank for standard tool holders High-efficiency insert design reduces running costs and downtime The S226-1TM is built around the proven concept of indexable inserts, which separate cutting geometry from the tool body and permit rapid replacement when wear occurs. This approach reduces overall tooling expenditure because only the insert needs replacing, not the entire cutter. Paired with the internal coolant channel, the design improves chip evacuation and cutting-zone cooling, which in turn stabilises cutting forces and extends insert life for repeatable production runs. Stiffness and repeatability from a compact shank and optimised geometry A 16 mm shank gives the cutter a rigid connection to common tool holders while the 90 mm overall length maintains good access in many setups. The 25 mm cutting length offers a balance between reach and stiffness, helping to keep chatter low during finishing and light roughing passes. The single-cutting-edge configuration is intended for defined chip control and straightforward indexing, and the included Torx fastener system (T8 key, M2.5x5.5 screw) simplifies insert clamping and maintenance. Practical workshop integration and spare-part logistics Compatibility with APMT 11T3 inserts from established manufacturers such as Korloy ensures broad availability of grades and geometries for different steels and finishing requirements. The tool’s compact mass and predictable mounting characteristics make it suitable for smaller CNC mills or as a standard station in a larger tool carousel. For cutting-edge selection or grade advice, Metav’s consultants provide application-focused recommendations and material‑specific grade matching to help set cutting parameters and maximise tool economy. For a reliable upgrade to indexable milling, contact Metav Werkzeuge for stock availability and tailored recommendations for the Teknik Makina S226-1TM shank milling cutter; the Metav team at Parkring 45 in Emmerich can assist with technical queries and supply logistics Technical data Article number: S226-1TM Label: 14mm Schaftfräser APMT 11T3 L90mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 14 mm Overall length: 90 mm Shank diameter: 16 mm Cutting length: 25 mm Weight: 0.139 kg Special features Internal coolant: yes Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2,5x5,5 Cutting edges: 1 Product type: Shank milling cutter SKU / UID: S226-1TM / S226-1TM FAQ Which inserts fit this shank milling cutter? The shank milling cutter accepts APMT 11T3 indexable inserts; Korloy grades are commonly compatible and available for a range of materials. Is the cutter suitable for through-coolant setups? Yes, the tool is equipped with internal coolant, allowing coolant delivery to the cutting zone when used with a suitable holder and coolant supply. What are the key mounting dimensions for toolholder selection? Refer to the 16 mm shank diameter and 90 mm overall length when choosing a holder; the 16 mm shank ensures compatibility with standard tool holders. How is the insert secured and exchanged? Insert clamping uses a Torx fastener system (T8 key) with an M2.5x5.5 screw for secure and repeatable tightening during insert changes. Can the cutter be used in compact CNC machines? The compact geometry and 25 mm cutting length make this cutter suitable for many smaller CNC setups where rigidity and access are required. What is the SKU for ordering spare parts or replacements? Orders and spare-part enquiries should reference SKU S226-1TM for the Teknik Makina shank milling cutter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise machining, secure clamping and straightforward insert replacement for a dependable production process; order directly via Metav Werkzeuge or discuss requirements with the consultants at Metav Werkzeuge. Shank milling cutter S160TM — for APXT 1003 indexable inserts, 14 mm shank (Teknik Makina) A Shank milling cutter S160TM designed for use with APXT 1003 indexable inserts, delivering stable toolholding and consistent performance in milling and slotting applications 14 mm shank diameter for stable clamping 30 mm cutting length for deep engagement Compatible with APXT 1003 indexable inserts Torx M2.5 screw and T8 key for secure clamping Increased productivity through a rigid shank design The S160TM combines a 14 mm shank with a 120 mm overall length to ensure strong toolholding and minimal vibration during machining. The rigid geometry contributes to improved surface finish and longer insert life, which in turn reduces downtime and tool-change frequency. For workshops and production lines seeking measurable productivity gains, the solid shank and balanced design support repeatable results on series parts and intermittent runs. Secure insert fastening for consistent cutting performance Compatibility with APXT 1003 indexable inserts and a clamp system using a Torx M2.5x5.5 screw secured with a T8 key provides a reliable seat and repeatable torque values. The single cutting edge with a 90° cutting angle focuses cutting forces to deliver predictable chip formation and easy insert indexing. This configuration simplifies maintenance and lowers the risk of incorrect seating, offering clear advantages in process reliability and operator safety. Practical dimensions tailored to industrial use With a 30 mm cutting length and a single cutting edge, the tool is suited for applications requiring precise slotting or peripheral milling where controlled chip evacuation and reduced cutting forces are priorities. The modest 0.15 kg weight assists in spindle balance, while the 14 mm diameter supports common collet and chuck systems used in machine shops. The overall geometry makes it adaptable for both CNC machining centres and manual milling setups where indexable insert systems are preferred for cost efficiency. Compatibility and application guidance for planners The S160TM is matched to APXT 1003 inserts and noted as compatible with Korloy-produced inserts, facilitating straightforward procurement and inventory standardisation. Planners benefit from the use of a widely accepted insert format: stocking fewer insert types while maintaining the ability to address varied material series and cutting conditions. Specification-driven selection of feeds and speeds will further enhance tool life and process economics. Contact Metav Werkzeuge for specification support and reliable supply of the Teknik Cutting Tools S160TM shank milling cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation and order handling Technical data Article number: S160TM Manufacturer: Teknik Makina Designation: Shank milling cutter for APXT 1003 indexable inserts Compatible insert type: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 Numbers / core technical data Shank diameter: 14 mm Cutting length: 30 mm Overall length: 120 mm Diameter: 14 mm Number of cutting edges: 1 Cutting angle: 90° Weight: 0.15 kg Special features / versions Single-edge geometry for controlled cutting forces Secure Torx clamping for repeatable insert seating Suitable for indexable insert milling operations Designed for CNC and workshop milling applications FAQ What inserts fit this shank milling cutter? The S160TM is specified for APXT 1003 indexable inserts; Korloy-manufactured APXT 1003 inserts are compatible with this Teknik Cutting Tools shank milling cutter. What are the key dimensions to check for toolholder compatibility? Important dimensions include the 14 mm shank diameter and 120 mm overall length; these determine collet and chuck compatibility for the Teknik Cutting Tools S160TM. How is the insert secured and what tool is needed? Insertion and clamping use a Torx M2.5x5.5 screw tightened with a T8 key to provide secure, repeatable seating of the APXT 1003 insert in the S160TM. What cutting angle and edge configuration does the tool use? The cutter features a 90° cutting angle and a single cutting edge, optimised for predictable chip formation and stable cutting in peripheral and slotting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Specifications: Order Number: S814TM Item: End Mill usable with SPMG 0602 Indexable Inserts of Taegutec Brand: Teknik Makina Numbers and Data: Diameter: 14mm Cutting Edges: 2 Weight: 0.148kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Schaftfräser für APKT 1003 Wendeplatten (Schaftdurchmesser 14 mm) Der Schaftfräser für APKT 1003 Wendeplatten eignet sich für präzise Außen- und Planfräsungen und verfügt über eine integrierte Innenkühlung zur verbesserten Spanabfuhr. 14 mm Schaft für stabile Werkzeugaufnahme Innenkühlung für optimierte Spanabfuhr Gesamtlänge 100 mm, Schneidenlänge 30 mm Passend für APKT 1003 Wendeplatten Korloy-kompatibel für standardisierte Wendeschneidplatten Höhere Zerspanleistung durch gezielte Kühlung und stabile Aufnahme Der Fräser kombiniert einen robusten Schaftdurchmesser von 14 mm mit einer Gesamtlänge von 100 mm und einer Schneidenlänge von 30 mm, was bei Einrichtarbeiten für stabile Aufnahmeverhältnisse sorgt. Die integrierte Innenkühlung führt Kühlschmierstoff direkt an die Schneidzone und reduziert dadurch thermische Belastung und Verschleiß der Wendeschneide. Für Bearbeitungen, die konstante Schnittbedingungen erfordern, bedeutet das längere Standzeiten und reproduzierbare Ergebnisse. Präzise Montage und zuverlässige Klemmung für produktive Prozesse Die Aufnahme und Befestigung erfolgen über die bewährte Torx-Verbindung: Torx Schlüssel T8 und Torx Schraube M2,5x5,5 garantieren sicheren Sitz der Wendeplatte und einfachen Wechsel. Mit einer Schneide (1) ist der Fräser auf gezielte Zustellungen ausgelegt, wodurch Vorschub und Schnittkraft effizient genutzt werden können. Das Ergebnis ist eine wirtschaftliche Spanbildung und geringe Nacharbeit. Kompatibilität und Einsatzhinweis für Wendeschneidplatten Das Werkzeug ist speziell für APKT 1003 Wendeplatten ausgelegt und ist Korloy-kompatibel, was den Einsatz standardisierter Plattengrößen ermöglicht. Im Einrichtvorgang empfiehlt sich die Kontrolle des Drehmoments an der Torx Schraube und eine passende Auswahl des Kühlschmierstoffs, um die Vorteile der Innenkühlung voll auszuschöpfen. Die kompakte Bauform erleichtert die Integration in gängige Werkzeugaufnahmen. Empfehlung: Den Schaftfräser von Teknik Makina für APKT 1003 Wendeplatten direkt über Metav Werkzeuge beziehen oder technische Rückfragen per eMail an info@metav-werkzeuge.com richten, um Einsatz und Kompatibilität abzustimmen Produktmerkmale Artikelnummer: S138-1TM Marke: Teknik Makina Bezeichnung: Schaftfräser Beschreibung: für APKT 1003 Wendeplatten Produktart: Schaftfräser Fakten Durchmesser: 14 mm Gesamtlänge: 100 mm Schaftdurchmesser: 14 mm Schneidenlänge: 30 mm Schneiden: 1 Gewicht: 0.126 kg Besonderheiten Innenkühlung: Ja Passend für Wendeplatten: APKT 1003 Passend für Hersteller: Korloy Torx Schlüssel: T8 (Montagewerkzeug) Torx Schraube: M2,5x5,5 (Klemmung) FAQ Für welche Wendeschneidplatten ist der Fräser geeignet? Der Schaftfräser ist für APKT 1003 Wendeschneidplatten ausgelegt und bietet durch die Korloy-Kompatibilität eine direkte Nutzung standardisierter Plattenformate. Wie wird die Wendeplatte am Fräser befestigt? Die Befestigung erfolgt über eine Torx Schraube M2,5x5,5; das Anziehen mit einem Torx Schlüssel T8 sorgt für sicheren Sitz und einfache Wechselzyklen. Welche Vorteile bringt die Innenkühlung in der Praxis? Die Innenkühlung führt Kühlschmierstoff direkt an die Schneidkante, reduziert Hitzeentwicklung und verbessert Standzeit sowie Spanabfuhr beim Fräsen mit APKT 1003 Platten. Wo erhalte ich technische Unterstützung oder Ersatzteile für den Fräser? Technische Fragen sowie Bestellungen können über Metav Werkzeuge abgewickelt werden; geben Sie bei Anfragen die Artikelnummer S138-1TM und die Marke Teknik Makina an. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise Ø14 mm shank, a 30 mm cutting length and secure Torx clamping for dependable milling performance; the design supports APXT 1003 indexable inserts and reduces changeover time. Order the S138TM directly via Metav Werkzeuge or ask our consultants if needed. Schaftfräser S138TM – shank cutter Ø14 mm, for APXT 1003 indexable inserts (Teknik Makina) Schaftfräser S138TM is a compact shank cutter engineered for reliable mounting of APXT 1003 indexable inserts in general milling operations. Compatible with APXT 1003 indexable inserts Ø14 mm shank for high rigidity 30 mm effective cutting length Secured with Torx screw M2,5x5,5 (T8) Secure insert clamping for uninterrupted production The holder is engineered to give a secure and repeatable connection between the tool body and the indexable plate. With a Torx M2.5x5.5 clamping screw operated by a T8 key, insert changes are quick and require only basic tooling, reducing machine downtime. This secure fastening ensures stable cutting conditions and consistent part quality when machining with APXT 1003 plates from recognised manufacturers. Small footprint, high rigidity — consistent surface quality A Ø14 mm shank paired with a 30 mm cutting length and a 100 mm overall length offers a compact solution that nevertheless resists deflection under load. The slim yet rigid geometry delivers improved surface finish and dimensional repeatability in through-feed and profiling tasks. At just 0.126 kg, the toolholder keeps spindle load low while maintaining the stiffness needed for controlled chip formation and reduced chatter. Compatible system design to simplify tooling choices Designed for APXT 1003 indexable inserts and compatible with Korloy plates, the toolholder simplifies tool inventory and shortens setup procedures. The single-cutting-edge configuration is suited to finishing and light-roughing operations where predictable chip evacuation and minimal toolpath correction are priorities. Clear mechanical fit and standardised clamping mean predictable repeatability across repeat orders. For reliable tooling from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for product advice and fast supply—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S138TM Manufacturer: Teknik Makina Designation: shank cutter for APXT 1003 indexable inserts SKU: S138TM Core data Shank diameter: 14 mm Cutting length: 30 mm Overall length: 100 mm Number of cutting edges: 1 Weight: 0.126 kg Design and features Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Clamping screw: M2,5x5,5 Required Torx key: T8 FAQ What inserts fit this shank cutter? The S138TM is designed for APXT 1003 indexable inserts and is compatible with inserts from Korloy as specified. How is the insert fixed in place? Insert retention is achieved with a Torx M2.5x5.5 clamping screw; a T8 key is used for tightening and removal. What is the shank diameter and why does it matter? The shank diameter is 14 mm; a larger shank diameter increases rigidity and reduces deflection for improved surface finish. Is this tool suitable for finishing work? Yes, the single-cutting-edge configuration and stable clamping make the toolholder suitable for finishing and light-roughing applications. What is the overall length of the tool? The overall length is 100 mm, providing a compact assembly that balances reach and stiffness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise hole geometry, rapid insert replacement and stable clamping for reliable production results; order the tool via Metav Werkzeuge or consult our specialists for application advice. U006TM Solid drill — 14 mm diameter, 110 mm overall length (Teknik Makina) The U006TM solid drill for indexable‑insert drilling, engineered for repeatable hole quality in workshop and CNC applications 14 mm cutting diameter 110 mm overall length Compatible with SPMT 0502 inserts 20 mm shank for secure clamping Precision drilling that stabilises production The U006TM delivers consistent hole geometry through a defined cutting profile and a 42 mm cutting length, which ensures full engagement of the effective flute during standard cycle depths. With a 14 mm nominal diameter and 110 mm overall length, the tool achieves predictable runout and repeatability across batches, reducing rework and inspection effort. This focus on dimensional stability supports higher first‑pass yields and steadier throughput in serial production. Adaptable insert system reduces downtime Designed for use with SPMT 0502 indexable inserts, the toolhead allows fast insert replacement and straightforward inventory management. Compatibility with Korloy plates means existing insert stocks can be used without adapter changes. The result is lower tooling downtime and a clearer cost profile per hole — a rational improvement that shortens changeover time and lowers total machining cost over production runs. Secure clamping for lower vibration and longer life A 20 mm shank and a balanced tool body reduce flex and contribute to stable spindle interaction. The modest mass of 0.158 kg helps limit centrifugal imbalance at moderate speeds while preserving rigidity where it matters most — at the cutting edge. The secure clamping provided by the shank specification diminishes chatter, improving surface finish and extending insert life, which in turn reduces consumable spend and machine idle time. Suitable for modern workshops and machining centres As an indexable‑insert drilling solution, this solid drill is suited to routine holemaking tasks in production settings where quick insert changes and consistent output are priorities. The combination of defined geometry, standard insert interface and compact overall design makes the tool a pragmatic choice for shops aiming to streamline tooling families. For applications requiring predictable performance and easy maintenance, this machining solution supports operational efficiency and planning. Contact Metav Werkzeuge for tailored technical advice and secure supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U006TM Designation: Solid drill Manufacturer: Teknik Makina ECLASS: 21180201 Facts Diameter: 14 mm Overall length: 110 mm Cutting length: 42 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.158 kg Special features Compatible with SPMT 0502 indexable inserts Compatible insert manufacturer: Korloy Indexable‑insert drilling concept FAQ Which indexable inserts fit this tool? The U006TM accepts SPMT 0502 inserts; Korloy plates and equivalent SPMT‑format inserts are compatible with the tool head. What are the key dimensions to consider? Diameter 14 mm, overall length 110 mm and cutting length 42 mm are the principal dimensions for fixture planning and cycle programming. Is the drill suitable for CNC machining centres? Yes — the tool’s 20 mm shank and indexable‑insert system make the U006TM appropriate for CNC machines where rapid insert replacement and repeatable hole quality are required. How does the tool mass affect performance? At 0.158 kg, the tool balances rigidity and manageable mass to help reduce vibration while preserving stability at typical spindle speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a compact 14 mm shank, internal coolant and compatibility with APKT 1003 indexable inserts for reliable, low-downtime milling operations; order the tool directly via Metav Werkzeuge or ask our consultants for application advice. Shaft Milling Cutter S160-1TM – 14 mm shank, internal coolant (Teknik Makina) The Shaft Milling Cutter S160-1TM is a solid shank cutter designed for use with APKT 1003 indexable inserts, offering precision machining in compact setups with integrated internal coolant. 14 mm shank for compact toolholders Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts Precision overall length 120 mm for stability Consistent cutting performance for industrial milling The S160-1TM is engineered to deliver consistent cutting performance in demanding workshop environments. With a 14 mm shank and a total length of 120 mm, the tool is balanced for stability while remaining suitable for machines with limited spindle clearance. Its compatibility with APKT 1003 indexable inserts allows quick replacement of worn cutting edges, which reduces downtime and keeps production flowing. Indexable inserts are secured mechanically, so the cutting edge can be renewed without regrinding the whole tool. Improved tool life and process reliability through internal cooling Built-in internal coolant directs cutting fluid close to the cutting zone, which lowers temperatures and improves lubrication at the insert edge. This cooling strategy helps to extend insert life and stabilise cutting forces, particularly during continuous or interrupted cuts. The cutter accepts a single insert seat for a focused cutting action, backed by a secure fastening with a T8 Torx key and an M2.5 x 5.5 screw, ensuring repeatable insert seating and minimal runout for precision work. Quick setup and practical handling to save workshop time Setup and changeover are straightforward: the insert is fixed with a Torx screw (supplied dimensions M2.5 x 5.5) and adjusted with a T8 key, enabling fast tool maintenance. The tool’s lightweight construction (approx. 0.151 kg) and compact design reduce operator fatigue during handling and make it easier to manage tool inventories. The 30 mm cutting length provides an effective engagement zone while limiting deflection, which supports tighter tolerances in finishing and semi-finishing operations. Compatibility, inventory simplicity and production advantages Designed for use with inserts from Korloy in the APKT 1003 format, this cutter reduces the need for multiple dedicated tools by leveraging replaceable inserts. The result is a lower stocking requirement and a more economical approach to tool wear: worn inserts are replaced rather than whole cutters. The cutter’s specification is suitable for a wide range of industrial milling tasks where a compact, coolant-fed, insert-based solution is preferred. For workshop-ready precision and confident reliability from Teknik Makina, contact Metav Werkzeuge to discuss tooling combinations or to place an order—Metav Werkzeuge provides experienced advice and a reliable European supply channel. Technical data SKU: S160-1TM Label: 14 mm shaft milling cutter APKT 1003 L120 mm with internal coolant Manufacturer: Teknik Makina Product type: Shaft milling cutter eClass: 21180806 Facts Shank diameter: 14 mm Overall length: 120 mm Cutting length: 30 mm Weight: 0.151 kg Number of cutting edges: 1 Torx key: T8 Torx screw: M2.5 x 5.5 Internal coolant: Yes Compatibility & special features Compatible with APKT 1003 indexable inserts Suitable for inserts by Korloy SKU/UID: S160-1TM / S160-1TM Category: Shaft milling cutters FAQ Which inserts fit this cutter? The cutter is designed for APKT 1003 indexable inserts; Korloy APKT 1003 inserts are explicitly compatible with the tool. How is the insert secured? An M2.5 x 5.5 Torx screw secures the insert; a T8 key is required for tightening and replacement. Does the cutter provide coolant supply to the insert? Yes, the tool features internal coolant, delivering fluid directly to the cutting zone to aid cooling and chip control. What are the key dimensions for machine setup? Relevant dimensions include a 14 mm shank diameter, 120 mm overall length and 30 mm cutting length for clearance and stability planning. Is this cutter suitable for compact toolholders? The 14 mm shank and compact overall length make it suitable for many compact toolholder setups where space is limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of compatibility, precise cutting geometry and compact design to keep drilling cycles consistent and tool changes quick. Order the insert drill body directly via Metav Werkzeuge or consult the team for application-specific guidance. Insert drill body U914TM — 14 mm diameter, 20 mm shank by Teknik Makina Insert drill body U914TM for efficient holemaking in production and workshop environments, designed to accept SÜMG 0502 indexable inserts from major suppliers. Compatible with SÜMG 0502 indexable inserts 14 mm nominal diameter for mid‑range drilling 20 mm shank for stable toolholding Short cutting length for compact setups Consistent hole quality at production rates The insert drill body is engineered to deliver reliable concentricity and repeatable hole diameter across batches. With a 14 mm nominal size and a cutting length of 28 mm, the body is optimised for moderate depths where axial stiffness and chip evacuation are critical. Using indexable inserts reduces downtime for regrinding; inserts from Taegutec or YG‑1 can be fitted quickly, preserving process stability and supporting higher spindle speeds without loss of accuracy. Fast tooling changes and simple stock handling The tool’s design—with a 20 mm shank and a dedicated 50 mm mounting length—supports quick clamping and minimal overhang, which improves rigidity and reduces vibration. The ability to accept standard SÜMG 0502 inserts shortens rework cycles and simplifies spare‑parts management in the workshop. This configuration helps maintain throughput while keeping maintenance effort low, ensuring a practical balance between productivity and workshop logistics. Practical benefits for mixed production environments Weighing just 0.152 kg and measuring 96 mm overall, the drill body suits compact machines and toolholders where space and balance matter. The indexed insert system provides the flexibility to change grades or geometries for different materials without replacing the entire tool carrier. For operations that require reliable, repeatable holes with economical consumable costs, this body offers a direct route to consistent results and predictable tool budgets. For specification checks, availability and delivery from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: U914TM Brand: Teknik Makina Insert type: SÜMG 0502 Facts Diameter: 14 mm Overall length: 96 mm Cutting length: 28 mm Shank diameter: 20 mm Mounting length: 50 mm Weight: 0.152 kg Special features Compatible insert manufacturers: Taegutec, YG‑1 Suitable for indexable inserts Compact, workshop‑friendly dimensions FAQ What insert type fits this drill body? The insert drill body accepts SÜMG 0502 indexable inserts; inserts from Taegutec or YG‑1 are compatible with this design. Which diameter and length does the tool provide? The U914TM is specified for a 14 mm diameter with a 96 mm overall length and a 28 mm cutting length. Is the shank suitable for common toolholders? A 20 mm shank diameter and a 50 mm mounting length make the body suitable for standard tool‑holding systems that accommodate a 20 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, compatible drilling solution that pairs a precise 14 mm cutting diameter with a 31.5 mm cutting length for consistent hole quality; its 16 mm shank and 45 mm clamping length ensure secure seating in standard holders. Order directly via Metav Werkzeuge or consult the team for application advice and supply from Emmerich. Indexable drill U034TM (Teknik Makina) — 14 mm, 16 mm shank A robust Indexable drill U034TM for precision holemaking in machining applications, designed to accept Korloy insert type QC-- 070304 and to integrate with common 16 mm holders for reliable production use 14 mm diameter for precise holes Optimised for Korloy QC-- 070304 inserts 16 mm shank for secure clamping 31.5 mm cutting length for deeper drilling Reliable hole quality for repetitive production Built for consistent performance, this indexable drill delivers repeatable hole diameters via its 14 mm nominal size and controlled cutting length. The tool’s geometry and rigid construction reduce runout and variation, allowing shops to maintain tighter tolerances across batches. With a measured 31.5 mm cutting length, the tool supports applications that require deeper engagement than standard short drills, while still preserving chip evacuation and hole finish. The result is reduced rework and improved throughput for routine drilling tasks. Insert compatibility that simplifies logistics and tool management The drilling head is configured to accept Korloy inserts, specifically QC-- 070304, which simplifies stock control and replacement intervals. Using standardised indexable inserts means faster changeovers and consistent cutting performance without regrinding solid tools. Compatibility with established insert systems also supports cost-efficient maintenance: replacement is limited to the insert rather than the whole body, improving uptime and lowering long-term operating costs for production environments. Secure clamping and ergonomic handling in the toolholder Designed with a 16 mm shank and 45 mm clamping length, the tool offers strong seating in conventional holders, reducing vibration and minimising positional shift under load. The compact overall design balances rigidity with accessibility in confined set-ups, while a lightweight construction (approx. 0.111 kg) makes handling and tool changes straightforward on busy shop floors. These attributes contribute to steady cutting conditions and prolong insert life through reduced chatter. Practical dimensions for workshop integration and set-up With an overall length of 90 mm and a focused cutting zone, the tool integrates easily into common drill tool chains and modular systems. The combination of compact length and specific cutting capacity supports both single-station and multi-station machining operations. The geometry is chosen to optimise chip flow for the designated insert type, helping to avoid clogging and maintain surface quality without requiring complex coolant setups or process adaptations. Contact Metav Werkzeuge to review application details and secure reliable supply of Teknik Cutting Tools’ indexable drill U034TM from Emmerich for immediate workshop integration Technical data Article number: U034TM Manufacturer: Teknik Makina Type: Indexable drill ECLASS: 21180201 Core technical figures Diameter: 14 mm Cutting length: 31.5 mm Overall length: 90 mm Shank diameter: 16 mm Shank clamping length: 45 mm Weight: 0.111 kg Design and special features Insert designation: QC-- 070304 Compatible with Korloy inserts Compact overall length for machine integration Lightweight tool body for easier handling SKU: U034TM FAQ What insert type fits this indexable drill? The indexable drill is designed for Korloy inserts, specifically the QC-- 070304 designation, providing standardised replacement and consistent cutting performance. What are the key dimensions to check for holder compatibility? Verify a 16 mm shank diameter and a 45 mm shank clamping length to ensure secure seating in standard toolholders for this drill. Is the tool suitable for deeper holes in series production? Yes, the tool’s 31.5 mm cutting length and rigid design support repetitive deeper drilling while maintaining dimensional accuracy. Which SKU should be referenced when ordering or enquiring? Reference SKU U034TM when requesting availability, technical details, or replacement inserts for this indexable drill. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise cutting geometry, a compact 20 mm shank for secure clamping and a 42 mm cutting length designed for dependable holemaking; order the Teknik Makina tool directly via Metav Werkzeuge or consult the Metav team for application matching. Indexable drill U814TM — Ø14 mm indexable drilling solution with 20 mm shank (Teknik Makina) A robust indexable drill U814TM engineered for precision holemaking in production and jobbing environments, offering a compact overall length and an indexable insert system for fast tool changes Precision Ø14 mm cutting diameter 20 mm shank for secure clamping 42 mm effective cutting length Consistent hole quality and predictable cycle times The U814TM is designed to deliver repeatable hole tolerances through a controlled cutting geometry and an indexable insert concept. With an actual cutting diameter of Ø14 mm and an effective cutting length of 42 mm, the tool is dimensioned for medium-depth drilling tasks where consistency matters. The limited overall length of 110 mm reduces overhang, which in turn lowers bending forces and improves roundness. This results in fewer rejects and a more stable machining process, which can be quantified during production planning and aids throughput optimisation. The light tool weight (0.17 kg) helps maintain spindle balance and reduces dynamic load during high-volume runs. Minimise downtime with a compatible insert system Changeovers are simplified by the use of standard indexable inserts: the drill accepts SPMG 0502 inserts and is compatible with inserts from Taegutec and YG-1, which are widely available. This standardisation ensures rapid replacement of cutting edges and access to a range of grades for different materials. The ability to source inserts from multiple reputable suppliers reduces lead times and inventory risk. Tool life is extended by replacing only the worn insert rather than the entire body, offering cost-efficiency across production batches. If data sheets or insert grade recommendations are needed for specific workpiece materials, technical advice can be provided by Metav Werkzeuge. Secure clamping and straightforward toolholder integration Designed for use with a 20 mm shank, the drill integrates with standard toolholders and shrinking or hydraulic chucks that accept this diameter. The shank engagement length of 50 mm provides a positive seating length for secure fixation, while the compact overall length supports stiffer setups and improved surface finish. These mechanical attributes make the tool suitable for CNC lathes and milling machines where reliable clamping and minimal run-out are essential. The indexable head arrangement also reduces set-up complexity: once the arbor and holder are aligned, insert replacement and minor adjustments are quick and reproducible, saving set-up time in batch production. Discuss suitability for the Teknik Makina U814TM with Metav Werkzeuge to match insert grade and holder type for the intended application — contact Metav Werkzeuge via info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request specification support Technical Data Article number: U814TM Manufacturer: Teknik Makina Product type: Indexable drill Facts Diameter: 14 mm Overall length: 110 mm Cutting length: 42 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.17 kg Special features Compatible inserts: SPMG 0502 Compatible with Taegutec and YG-1 inserts Indexable insert system for fast edge changes FAQ What insert type does this drill use? The drill uses SPMG 0502 indexable inserts; replacements from Taegutec and YG‑1 are suitable for the U814TM. Which shank size is required for mounting? A 20 mm shank holder is required; the U814TM has a 20 mm shank diameter with a 50 mm engagement length. What is the maximum drilling depth this tool is designed for? The tool provides an effective cutting length of 42 mm, with an overall length of 110 mm, suitable for medium-depth holemaking. Can the insert grades be varied for different materials? Yes, the indexable system accepted by the U814TM allows selection of different insert grades from compatible suppliers to suit various workpiece materials. Is the tool balanced for high-speed rotation? The U814TM’s compact design and low mass (0.17 kg) contribute to reduced overhang and better dynamic behaviour; specific balancing data should be verified for very high spindle speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-rigidity drilling solution that combines 14 mm diameter precision with a 42 mm cutting length for reliable production performance; order or request technical advice directly via Metav Werkzeuge. Teknik Makina U302TM Indexable Drill Body — 14 mm diameter, 42 mm cutting length The U302TM indexable drill body is a purpose-built drilling component for CNC machining centres and production drills, designed to accept Taegutec SOMT 0502 indexable inserts for efficient, repeatable holemaking. 14 mm diameter for medium holes Compatible with Taegutec SOMT 0502 inserts 42 mm cutting length for deeper drilling 20 mm cylindrical shank for stable clamping Consistent hole quality through focused geometry and rigidity The indexable drill body achieves stable cutting performance thanks to its rigid 20 mm shank and optimised geometry. The combination of a 14 mm diameter and 42 mm cutting length provides a predictable chip evacuation path and reduces runout, which in turn delivers more consistent hole tolerances in serial production. Engineers benefit from a repeatable drilling cycle and reduced scrap rates when the holder is clamped in standard toolholders on CNC machining centres. Reduced downtime with indexable insert compatibility Compatibility with Taegutec SOMT 0502 inserts makes the holder an economical choice for workshops and production lines: inserts can be changed quickly without replacing the body, lowering inventory cost for spare parts and shortening machine downtime. The design supports straightforward insert seating and secure clamping, allowing process planners to maintain cutting performance without elaborate regrinding procedures — a practical advantage for environments that prioritise throughput and maintainability. Practical handling, clear specification and trusted supply chain The drilling component is lightweight at 0.165 kg, facilitating tool handling and fast magazine changes during tool swaps. With an overall length of 114 mm and a shank length of 50 mm, the body fits common toolholders while keeping overhang to a minimum, which helps reduce vibration and extend insert life. Sourced through Metav Werkzeuge, the product is supplied from a European quality filter that supports reliable delivery and technical competence for industry and trade. Contact Metav Werkzeuge for specification matching and supply from Emmerich — telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: U302TM Name: Indexable drill body (Vollbohrer) Manufacturer: Teknik Makina Data Diameter: 14 mm Overall length: 114 mm Cutting length: 42 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.165 kg eCl@ss: 21180201 Special features For indexable inserts: SOMT 0502 Compatible insert manufacturer: Taegutec Files: 62de7ec1bd24461b3d5f7a4e, 62de7dd60f56dbb4de4dbedb FAQ What insert type is recommended for this drill body? The drill body is designed for Taegutec SOMT 0502 indexable inserts; using the specified insert type ensures correct seating and predictable cutting geometry. Can the holder be used in standard toolholders on CNC machining centres? Yes, the body’s 20 mm shank and 50 mm shank length are suitable for common toolholders used in production CNC machining centres, providing stable clamping and reduced runout. How deep can this tool drill reliably? With a 42 mm cutting length and an overall length of 114 mm, the body supports deeper drilling within the specified cutting length; tool life and hole quality depend on machining parameters and insert condition. Is the drill body lightweight for fast tool changes? At 0.165 kg, the component is light enough to simplify handling during tool magazine changes and manual preparation, contributing to shorter changeover times. What is the article number for ordering or reference? The article number for ordering and reference is U302TM from Teknik Makina, as listed in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable‑insert design with a 14 mm diameter, 56 mm cutting length and a rigid 20 mm shank for stable, long‑running performance; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. U402TM Solid Drill by Teknik Makina – 14 mm, fits Taegutec SOMT 0502 inserts The U402TM solid drill is an indexable‑insert drilling solution designed for precision metalworking applications, combining a compact overall length with repeatable performance when used with Taegutec SOMT 0502 inserts 14 mm diameter for standard holemaking 56 mm cutting length for deeper drilling 20 mm shank for secure clamping Compatible with Taegutec SOMT 0502 inserts Stable indexable‑insert drilling for production use The U402TM is configured as an indexable‑insert drill that accepts Taegutec SOMT 0502 cutting plates, enabling swift insert changes without re‑setting the holder. This arrangement supports predictable cycle times in production and reduces the need for full tool replacement. The design focuses on repeatability and straightforward maintenance, which matters where uptime and process reliability are priorities. Consistent hole quality through measured cutting reach With a 56 mm cutting length and a 14 mm diameter, the tool provides a defined cutting envelope that helps maintain concentricity and depth control across runs. A consistent cut length minimises the number of passes required for deeper holes and supports uniform chip evacuation when paired with an appropriate coolant strategy, contributing to improved surface finish and dimensional stability. Secure clamping and reduced vibration for accurate results A 20 mm shank and 50 mm engagement length deliver the axial rigidity necessary for steady drilling, while the overall length of 128 mm balances reach with stiffness. The compact mass (approx. 0.17 kg) helps reduce dynamic load on the spindle, which is beneficial when aiming for tight tolerances or when operating at medium spindle speeds on modern machining centres. Lower lifetime costs through replaceable inserts Using Taegutec SOMT 0502 inserts means the cutting edge can be renewed rapidly on the shop floor, cutting downtime and consumable expenses versus solid‑carbide regrind cycles. The indexable system is designed to offer long service life for the holder assembly and straightforward insert indexing, which together improve total tool economy in repetitive drilling tasks. Practical supply and workshop readiness The U402TM is supplied with clear technical references and is suitable for inclusion in standard tooling assortments. Availability from stock and a concise specification sheet simplify procurement and planning for maintenance cycles. For shops looking to consolidate suppliers, the tool’s compatibility with established Taegutec inserts makes integration into existing tooling inventories easy. Documentation and product files for process planning Technical documentation is provided to support machine setup and tool management; product documents are indexed for planning and traceability (files: 62de7ec1148ec6b71020ffa3, 62de7dd50aced56449540e80). These resources assist workshop managers and planners in verifying tool geometry and ensuring a controlled introduction into production. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina U402TM solid drill compatible with Taegutec SOMT 0502 inserts and to arrange prompt supply from our Emmerich warehouse Technical data SKU: U402TM Manufacturer: Teknik Makina Type: Solid drill (indexable‑insert holder) Compatible inserts: Taegutec SOMT 0502 Core data Diameter: 14 mm Overall length: 128 mm Cutting length: 56 mm Shank diameter: 20 mm Shank engagement length: 50 mm Weight: 0.17 kg Special features Indexable‑insert concept for quick edge changes Suited to precision metalworking tasks Technical files available (see file IDs above) FAQ Which insert type fits this drill? The U402TM accepts Taegutec SOMT 0502 indexable inserts; the holder geometry is made for that plate size and clamp arrangement. What are the critical dimensions for machine setup? Key setup values are the 20 mm shank diameter, 50 mm shank engagement length and the 128 mm overall tool length for correct projection and clamping. Is the holder suitable for automated tool changing? The solid drill is compatible with standard toolholders and ATC systems provided the machine’s spindle and clamping interface match the toolholder chosen for the 20 mm shank. How does the insert system affect workshop costs? By using replaceable SOMT 0502 inserts, the U402TM reduces the frequency of full‑tool replacements and lowers consumable costs through simple insert indexing. Are technical drawings available for CAM programmers? Yes, technical files linked to the product (file IDs provided) contain the geometry and specification details needed for CAM and process documentation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, service-friendly drill body that combines precise indexing with fast insert changes and stable clamping for uninterrupted machining. The compatibility with XC-- 070304 indexable inserts and the compact 77 mm overall length make this tool a practical choice for production cells—order the drill body directly via Metav Werkzeuge or ask our consultants for tailored advice. U047TM — 14 mm indexable insert drill body (L 77 mm) by Teknik Makina U047TM is a short, indexable insert drill body designed for precise holemaking in modern CNC applications, compatible with XC-- 070304 indexable inserts from ISCAR. 14 mm nominal diameter Compatible with XC-- 070304 inserts 45 mm shank length Secure Torx M2.5 fixing Increased productivity through indexable inserts and compact design The indexable insert drill body is engineered to reduce machine downtime by allowing fast insert swaps instead of full-tool replacement. With a 14 mm nominal diameter and a cutting length of 31.5 mm, the tool supports typical through-hole and short-flood drilling operations while keeping tool-change cycles brief. The compatibility with XC-- 070304 inserts by ISCAR simplifies inventory management where the same insert family is already used, lowering stocking complexity and enabling quick adaptation across batch runs. The compact overall length of 77 mm helps in applications with restricted tool holders or shorter tool projection, improving rigidity and cutting stability. Secure clamping and straightforward maintenance for reliable results A 45 mm shank length provides a stable clamping interface for most standard toolholders, contributing to consistent concentricity and repeatable hole quality. Fast and secure insert fastening is achieved via the M2.5 x 5.5 fixing screw operated with a T8 Torx key, allowing controlled torque application and repeatable seating of the insert pocket. The body’s modest weight of 0.111 kg reduces rotating mass and supports smoother spindle behaviour at operational speeds. Maintenance routines are simplified: replacement of the insert and screw is rapid and requires only standard workshop tools, which reduces non-productive time and helps maintain throughput. Practical fit for production workshops and toolroom consolidation Designed for integration into industrial drilling programmes, the tool body supports consistent holemaking when paired with the correct indexable inserts. The compatibility with a widely used insert designation encourages tool standardisation across machines and workstations, aiding procurement and lowering the number of separate cutting tools required. Whether implemented in single-machine setups or multi-spindle cells, the body’s balanced dimensions and insert system enable predictable tool life and easier process qualification. The U047TM from Teknik Makina is therefore suited to operations seeking a pragmatic balance between flexibility, serviceability and machining reliability. For practical advice on integrating this Teknik Makina indexable insert drill body into an existing toolset or to secure stock from Metav Werkzeuge in Emmerich, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: U047TM Product type: Indexable insert drill body Brand: Teknik Makina Compatible inserts: XC-- 070304 (ISCAR) Dimensions & core data Diameter: 14 mm Overall length: 77 mm Shank length: 45 mm Cutting length: 31.5 mm Weight: 0.111 kg Assembly & fixing Fixing screw: M2.5 x 5.5 Torx key: T8 Designed for: XC-- 070304 indexable inserts Suitable insert manufacturer: ISCAR FAQ What insert family fits this drill body? The drill body accepts XC-- 070304 indexable inserts; the designation refers to the compatible insert geometry and pocket form. Which manufacturer’s inserts are recommended for best fit? The body is specified to be compatible with inserts from ISCAR, ensuring correct seat and repeatability when ISCAR XC-- 070304 inserts are used. What are the key dimensions that affect clamping and projection? Important dimensions are the 14 mm diameter, 45 mm shank length and 77 mm overall length; these determine holder compatibility and stiffness in the machining setup. How is the insert secured and which tool is required? Inserts are fixed with a M2.5 x 5.5 screw tightened with a T8 Torx key for reliable seating and repeatable torque values. Is this tool suitable for constrained setups with short tool projection? Yes; the compact overall length of 77 mm and short projection characteristics make the body suitable for operations with limited clearance or lower overhang requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines precise 14 mm drilling, a 31.5 mm cutting length and straightforward insert changes for shorter setups; order directly via Metav Werkzeuge or contact our consultants for specification support. Solid drill U063TM — 14 mm, for XC-- 070304 indexable inserts (Teknik Cutting Tools) Solid drill U063TM is an indexable-insert drill designed for accurate, short-reach holemaking in general metalworking, engineered for use with XC-- 070304 inserts and compatible with Ceratizit systems 14 mm drill diameter for precise holemaking 77 mm overall length for short-reach operations Compatible with Ceratizit XC-- 070304 inserts Torx T8 screw system with M2.5x5.5 fixing Efficient indexable drilling for stable production The solid drill is engineered to deliver consistent hole quality through a combination of defined geometry and a compact overall length. With a 14 mm diameter and 31.5 mm cutting length, the tool provides a balance between rigidity and chip evacuation; this reduces vibration and improves bore roundness in common workshop steels. The use of indexable inserts means cutting edges are replaced rather than resharpened, lowering tool-room downtime and providing a predictable life-cycle cost per hole. Modularity that reduces downtime and simplifies tooling Designed for modular tool systems, the shank and fixing details support quick insert changes and reliable clamping. The 45 mm shank length ensures secure clamping in standard tool holders, while the Torx T8 drive and M2.5x5.5 screw allow fast, repeatable insert replacement. Compatibility with XC-- 070304 inserts from Ceratizit enables access to a range of grades for different materials, so the same holder can be adapted for steel, aluminium or other alloys without replacing the body. Robust handling and benefits for workshop efficiency A compact overall length of 77 mm and a mass suited to handheld handling make the tool practical for both bench and CNC applications where short-reach drilling is required. The modular concept reduces overall tooling inventory by separating the wear component—the insert—from the tool body, which supports cost-effective maintenance. Supplied by Teknik Cutting Tools, the item is intended for industrial environments where repeatability and straightforward maintenance are priorities. Contact Metav Werkzeuge for tailored application advice on the U063TM solid drill and arrange procurement from our Emmerich stock by emailing info@metav-werkzeuge.com or calling +49 2822 7131930 Technical Data Article number: U063TM Label: 14mm Vollbohrer XC-- 070304 L77mm Description: for XC-- 070304 Indexable Inserts EClass: 21180201 Facts Diameter: 14 mm Overall length: 77 mm Cutting length: 31.5 mm Shank length: 45 mm Shank diameter: 16 mm Weight: 0.111 kg Special features For indexable inserts: XC-- 070304 Compatible insert manufacturer: Ceratizit Torx key: T8 Torx screw: M2.5x5.5 SKU: U063TM Manufacturer indicated: Teknik Makina FAQ What insert type does this drill use? The tool is specified for XC-- 070304 inserts, enabling rapid replacement of cutting edges without body changes. Which screw and key are required for insert clamping? Insert clamping uses an M2.5x5.5 Torx screw tightened with a T8 Torx key. Is the shank suitable for standard holders? The 45 mm shank length and 16 mm shank diameter are intended for conventional clamping in standard tool holders. What benefits do indexable inserts offer compared with solid carbide drills? Indexable inserts allow economical edge replacement, consistent hole quality and reduced downtime since the body remains in service while inserts are swapped. Who manufactures this drill and what is the SKU? The drill is supplied under SKU U063TM and is associated with Teknik Makina / Teknik Cutting Tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a tool that combines precise dimensions with rapid insert changes: the 14 mm diameter and 31.5 mm cutting length deliver stable hole quality, while compatibility with XC-- 070304 indexable inserts keeps downtime low — order or request advice via Metav Werkzeuge for supply and consultation. Solid drill (Vollbohrer) — 14 mm, for XC-- 070304 indexable inserts, L77 mm A solid drill designed for secure insert clamping and efficient holemaking in industrial machining applications 14 mm diameter for standard bore sizes Compatible with XC-- 070304 indexable inserts Overall length 77 mm for depth reach Torx T8 screw M2.5x5.5 for secure fixing Faster cycle times through insert-based holemaking The combination of a 14 mm tool diameter and an insert system tailored to XC-- 070304 means shorter tool-change intervals and predictable performance across batches. Using indexable inserts preserves cutting geometry without regrinding; a worn edge is replaced in seconds rather than hours. For production environments this translates directly into higher machine uptime and a clear improvement in process efficiency, with the capital tied up in tooling reduced through lower maintenance overhead. Secure clamping and reliable machining outcomes A 45 mm shank engagement provides reliable clamping in standard tool holders, while the 77 mm overall length ensures adequate reach for many common drilling setups. The 31.5 mm cutting length gives sufficient engagement for through or shallow blind holes, maintaining chip control and surface quality. These dimensional specifications support consistent centring and repeatability, so repeat runs show minimal scatter in hole diameter and form — an important aspect for precision assemblies. Simple insert replacement and low-maintenance upkeep Changeovers are facilitated by the Torx T8 fastening system and the M2.5x5.5 screw specification, making spare parts and service procedures straightforward to standardise on the shop floor. Compatibility with Taegutec-type inserts broadens supplier choice and shortens procurement times. The tool’s compact mass and clear mechanical interfaces mean maintenance routines are quick to perform, reducing indirect labour and helping to maintain steady production throughput. Practical fit for workshops and production lines This tool suits toolrooms, job shops and industrial cells that require an insert-driven drilling solution rather than brazed or regrindable tooling. The design supports modular replacement strategies and integrates easily into existing holder systems. For teams seeking an efficient holemaking option with predictable life cycles and easy logistics, this variant offers a pragmatic balance between performance and serviceability. For further measurements or application advice, technical support is available. For detailed compatibility checks and reliable supply from Emmerich, contact Metav Werkzeuge to discuss the Teknik Makina 14 mm solid drill and ensure the correct insert stock is chosen for the application. Technical Data SKU: U21TM Manufacturer: Teknik Makina ECLASS: 21180201 Core data Diameter: 14 mm Overall length: 77 mm Cutting length: 31.5 mm Shank length: 45 mm Holder diameter (aufnahme): 16 mm Weight: 0.111 kg Torx key: T8 Torx screw: M2.5x5.5 Features Compatible with XC-- 070304 indexable inserts Compatible inserts manufacturer: Taegutec Product type: solid drill (Vollbohrer) Label: 14mm solid drill for XC-- 070304 L77mm SKU label: U21TM FAQ Which insert type fits this tool? The solid drill accepts XC-- 070304 indexable inserts; inserts from Taegutec are compatible with the clamping geometry. What are the key dimensions to check for holder selection? Check the 14 mm diameter, 77 mm overall length and 45 mm shank length to ensure correct clamping and reach for the intended holder. How long is the cutting engagement and what does it mean in practice? The 31.5 mm cutting length denotes the maximum usable flute length into the workpiece; it is sized for common blind and through-hole tasks and supports stable chip evacuation. Which fastening tool is required for insert changes? Insert clamping uses a Torx T8 key and an M2.5x5.5 screw for secure fixing and quick replacement cycles. Is this tool suitable for continuous production runs? Yes; the insert system and robust clamping make it appropriate for repetitive operations where rapid insert replacement and predictable tool life reduce overall cycle costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a compact 14 mm diameter and a 56 mm cutting length delivers high productivity for medium-depth holemaking while the 20 mm shank ensures stable clamping in standard toolholders; order the tool directly via Metav Werkzeuge or consult the technical team for specification matching U714TM indexable insert drill — 14 mm Ø, 56 mm cutting length (Teknik Makina) U714TM is an indexable insert drill engineered for consistent, high‑throughput holemaking in production and CNC environments 14 mm cutting diameter 56 mm effective cutting length 20 mm shank for secure clamping Compatible with SPMG 0502 inserts Suited to Taegutec and YG-1 inserts Increased throughput from fewer passes The compact design of this indexable insert drill combines a 14 mm diameter with a 56 mm cutting length to allow deeper holes per plunge while maintaining process stability. The geometry enables single‑pass operations in many common setups, reducing cycle times and minimising tool changes. For production lines where every second counts, the tool’s configuration translates into measurable improvements in machining efficiency and a lower cost per hole without compromising finish quality. Stability and repeatability under spindle load A 20 mm shank diameter and a 50 mm shank length give the tool reliable seating in conventional holders, which improves concentricity and reduces runout. The modest mass of 0.18 kg lowers rotational inertia for quicker acceleration and deceleration in automated cycles, helping to maintain consistent hole geometry across batches. Where repeatability is critical, these characteristics support dependable results and minimise scrap rates in repetitive machining tasks. Insert compatibility for economical reconditioning Designed for use with SPMG 0502 indexable inserts, the drill accepts widely available grades from manufacturers such as Taegutec and YG‑1, simplifying stockkeeping and promoting economical regrinding or replacement. The indexable concept separates the cutting edge from the body, so worn inserts can be exchanged rapidly while retaining the same drill body—reducing downtime and keeping spindle utilisation high. Supplied via Metav Werkzeuge’s distribution in Emmerich, the product benefits from an established quality filter and reliable logistics for the European market. Contact Metav Werkzeuge for precise application advice on the Teknik Makina U714TM indexable insert drill and to confirm suitability for specific machines; reach the team at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: U714TM Manufacturer: Teknik Makina ECLASS: 21180201 Product name: Vollbohrer (indexable insert drill) Core dimensions Diameter: 14 mm Overall length: 124 mm Cutting length: 56 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.18 kg Features & compatibility Compatible inserts: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 SKU: U714TM Documentation: 2 files available FAQ What insert type does the drill use? The U714TM indexable insert drill accepts SPMG 0502 inserts; compatible grades from Taegutec and YG‑1 are suitable for standard applications. Is the shank suitable for standard holders? Yes — the tool features a 20 mm shank diameter with a 50 mm shank length designed for secure seating in common toolholders and collet systems. What hole depth is achievable in a single pass? The tool’s 56 mm effective cutting length supports medium‑depth holes per pass; actual single‑pass performance depends on material, insert grade and machine rigidity. Does the drill come with inserts fitted? Documentation indicates the body is for SPMG 0502 inserts; inserts are typically stocked separately and should be selected according to workpiece material and cutting conditions. How does the drill reduce downtime? By using indexable inserts, worn cutting edges are replaced quickly without removing the drill body, which reduces tool‑change time and keeps spindle uptime high. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, left‑hand boring solution that pairs precision with practical cooling and easy insert compatibility; the slim shaft and internal coolant reduce vibration and improve chip control. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Boring bar A10-12K — 15.5 mm diameter, internal coolant, for DCMT 0702 indexable inserts (Teknik Makina) The A10-12K boring bar is a compact, left‑hand cutting boring bar designed for use with DCMT 0702 indexable inserts, offering internal coolant feed and a 125 mm overall length for confined tool stations. 15.5 mm nominal diameter Internal coolant feed Left‑hand cutting direction Compatible with DCMT 0702 inserts Better chip control and consistent cutting with internal coolant The integrated internal coolant channel delivers lubricant directly to the cutting edge, which improves chip evacuation and helps maintain cutting temperatures during extended cycles. As a result, tool life becomes more predictable and surface finish stabilises across repeated operations. With a shaft diameter of 12 mm and an overall length of 125 mm, the compact tool body reduces lever arm vibration, which is particularly advantageous in short‑reach boring applications where rigidity and thermal stability matter. Precise insert fit and reliable clamping for repeatable results Designed for DCMT 0702 indexable inserts, the holder features a clamping geometry that secures the insert reliably while maintaining the correct cutting height of 27 mm. The narrow clamping head width of 8.9 mm enables minimal overhang and accurate positioning in fixture setups. The ISO designation A10-12K indicates compatibility with standard tool holders, providing a straightforward solution for workshops that demand reproducible set‑ups and fast index changes without compromising accuracy. Practical handling and maintenance for production environments Assembly and routine maintenance are simplified thanks to the supplied fastener specification (Torx key T8, screw M2.5x5.5) and the lightweight construction of approximately 0.097 kg, which eases handling during changeovers. The left‑hand cutting orientation supports machining strategies where counter‑directional cutting is required, expanding the tool’s applicability across turning and internal boring tasks. The combination of compact design and coolant feed helps reduce downtime and supports a steady cycle time in mixed production runs. Contact Metav Werkzeuge for expert guidance on integrating the Teknik Cutting Tools boring bar KA517TM into the production line or to confirm compatibility with existing holders and inserts Technical data Article number: KA517TM ISO designation: A10-12K ECLASS: 21180806 Product type: Boring bar Facts Diameter: 15.5 mm Overall length: 125 mm Shaft diameter: 12 mm Cutting height: 27 mm Clamping head width: 8.9 mm Weight: 0.097 kg Cutting direction: left Special features For DCMT 0702 indexable inserts Internal coolant feed Torx key: T8 Torx screw: M2.5x5.5 SKU: KA517TM FAQ Is this holder compatible with DCMT 0702 inserts? Yes. The boring bar A10-12K is designed specifically for use with DCMT 0702 indexable inserts and secures the insert at the correct cutting height for repeatable performance. What does the internal coolant provide for machining? Internal coolant in the A10-12K boring bar supplies lubricant directly to the cutting edge, improving chip evacuation, reducing heat at the shear zone and supporting extended insert life. Which cutting direction does this tool use? The tool is configured for a left cutting direction, suitable for operations that require counter‑directional cutting or specific set‑ups in turning and internal boring. What fasteners are required for insert clamping? The clamping system uses a Torx key T8 and a screw sized M2.5x5.5, which are specified for secure, repeatable tightening. Can the A10-12K be used in compact tool stations? Yes. With a 125 mm overall length and a 12 mm shaft, the boring bar is intended for short‑reach applications where rigidity and reduced overhang are essential. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, a compact 15.5 mm cutting diameter and secure ISO shank design for reliable small‑bore turning. Order the boring bar directly via Metav Werkzeuge or ask our consultants for compatibility advice. Boring bar A10-12K for DCMT 0702 – 15.5 mm with internal coolant (Teknik Makina) The Boring bar A10-12K is a compact, coolant‑through tool designed for precise small‑bore operations with DCMT 0702 indexable inserts in constrained turning applications. 15.5 mm cutting diameter for DCMT 0702 inserts Internal coolant supply for improved cooling 125 mm overall length, compact rigid design Right‑hand cutting direction, ISO A10-12K shank Efficient cooling and longer insert life in small bores The combination of internal coolant and a coolant‑through channel keeps the cutting zone flushed and reduces thermal load on the insert, which prolongs insert life and stabilises cutting forces. With a 15.5 mm cutting diameter and coolant directed to the tip, chips are evacuated more reliably and temperatures at the cutting edge are lowered. This effect is especially valuable for high‑precision finishing where consistent surface quality is required and thermal distortion must be minimised. Compact geometry for rigidity and repeatable clamping A shaft diameter of 12 mm and 125 mm overall length provide a balance between accessibility and stiffness for restricted bores. The bar is finished to an ISO A10‑12K shank standard so it is compatible with a wide range of clamping systems, and the clamping interface is secured with a Torx T8 drive and M2.5x5.5 screw for repeatable seating. The 95° cutting angle and right‑hand cutting direction are engineered to deliver predictable chip flow and steady cutting forces, reducing vibration and improving surface finish. Designed for workshop efficiency and versatile use Optimised for indexable turning with DCMT 0702 inserts, this tool offers a straightforward retrofit into existing toolholders intended for small‑diameter boring. The compact design makes it suitable for confined setups, while the coolant‑through capability supports tougher operations where heat management makes a measurable difference. Lightweight construction and standardised mounting reduce changeover time, helping to keep machine uptime high and tooling logistics simple. For ordering or technical clarification regarding Teknik Makina's boring bar A10-12K (SKU KA513TM), contact Metav Werkzeuge for procurement and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA513TM Manufacturer: Teknik Makina Product type: Boring bar ISO designation: A10-12K Facts Cutting diameter: 15.5 mm Overall length: 125 mm Shaft diameter: 12 mm Cutting height: 27 mm Clamping head width: 8.9 mm Weight: 0.097 kg Cutting angle: 95° Cutting direction: right Special features Internal coolant: yes Compatible inserts: DCMT 0702 Torx screw: M2.5x5.5 Torx key: T8 FAQ Is this bar compatible with DCMT 0702 indexable inserts? The boring bar A10‑12K is designed specifically for DCMT 0702 indexable inserts and provides the correct seating and coolant feed for those inserts. Does the tool provide coolant directly to the cutting edge? Yes, the tool features coolant‑through capability so coolant is delivered directly to the cutting zone to assist chip evacuation and temperature control. What is the overall length and shank standard for mounting? The tool has an overall length of 125 mm and an ISO A10‑12K shank for standardised mounting and secure clamping. Which cutting direction and cutting angle does the tool use? The boring bar is configured for a right‑hand cutting direction with a 95° cutting angle to ensure predictable chip flow and stable cutting behaviour. What fastening hardware is used for the insert seat? The clamping screw is M2.5x5.5, tightened with a Torx T8 key to provide repeatable and secure insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise indexable‑insert compatibility and compact dimensions for reliable internal boring. The tool’s 15.5 mm cutting diameter and 12 mm shank deliver stable engagement and simple holder integration, while the 125 mm overall length keeps tool overhang manageable for accurate bores. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar S10-12K for DCMT 0702 indexable inserts — 15.5 mm, L125 mm (Teknik Makina) A Boring bar S10-12K designed for internal turning with DCMT 0702 indexable inserts, offering a compact 125 mm length for controlled cutting and reliable repeatability Compatible with DCMT 0702 inserts Diameter 15.5 mm Overall length 125 mm Right‑hand cutting direction Accurate internal bores with proven insert compatibility The S10‑12K model is engineered to work with DCMT 0702 indexable inserts, ensuring consistent cutting geometry and predictable bore finishes. With a 15.5 mm cutting diameter and a 95° cutting angle, the tool supports small‑bore applications where stability and repeatability matter. These measurable specifications translate into fewer trial passes and tighter tolerances on final bores, reducing scrap and rework in production environments. Fast insert changes and secure clamping reduce downtime A well designed clamping interface speeds routine maintenance. The bar offers an 8.9 mm clamping width and uses a Torx T8 key with a M2.5x5.5 screw for insert retention, enabling quick, tool‑guided replacement of indexable tips. This combination of standardised fixing and compact clamping reduces changeover time and limits process variability, which is especially valuable in batch production or mixed‑series machining. Stable shank geometry for reliable toolholding The 12 mm shank diameter gives a rigid connection to the toolholder, minimising bending and vibration during cuts. At an overall length of 125 mm and a lightweight construction (approximately 0.097 kg), the bar balances reach and stiffness for controlled internal operations. The right‑hand cutting direction is suitable for conventional lathe setups and automatic cycles, helping to maintain consistent chip flow and surface integrity. Practical fit for workshops and production cells Marked as SKU K298TM, this boring bar is a compact and economical option for workshops seeking an insert‑based solution without complex setup. Its form factor is compatible with common toolholders and supports predictable set‑up times. For facilities aiming to streamline tooling inventories, the bar’s standard interface and dimensions make it easy to integrate into existing equipment with minimal adaptation. For ordering or tailored advice on integrating this Teknik Makina boring bar (SKU K298TM) into a production workflow, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance Technical data SKU: K298TM Model: S10-12K Brand: Teknik Makina Product type: Boring bar for DCMT 0702 indexable inserts Core dimensions Diameter: 15.5 mm Overall length: 125 mm Shank diameter: 12 mm Cutting height: 27 mm Clamping width: 8.9 mm Weight: 0.097 kg Cutting angle: 95° Features & compatibility Compatible inserts: DCMT 0702 Cutting direction: right Torx key: T8 Torx screw: M2.5x5.5 ECLASS: 21180806 FAQ Which inserts fit this boring bar? The boring bar S10‑12K is compatible with DCMT 0702 indexable inserts and is supplied as SKU K298TM for easy ordering. What is the cutting direction of the tool? The bar is configured for a right‑hand cutting direction, suitable for standard lathe and CNC machining cycles. What shank size is required in the toolholder? A 12 mm shank diameter is specified for the toolholder interface, providing secure seating and stability. Which Torx key and screw secure the inserts? Insert retention uses a Torx T8 key and M2.5x5.5 screw for reliable clamping and straightforward replacement. Is the S10‑12K suitable for production and workshop use? Yes, the S10‑12K from Teknik Makina is designed for workshop and production environments where compact, insert‑based boring with predictable set‑up times is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining compact design with secure clamping and fast insert changes, this shank milling cutter ensures consistent, repeatable results in small-scale milling operations. Benefit from the 15.5 mm cutting diameter, robust 16 mm shank and quick Torx fastening for efficient tool changes – order directly via Metav Werkzeuge or consult the specialists if further clarification is required. S820TM shank milling cutter — compatible with SPMG 0502–0904 indexable inserts, 15.5 mm diameter A compact S820TM shank milling cutter engineered for precision milling using SPMG 0502–0904 indexable inserts, ideal for confined toolholders and short-reach machining tasks. Compatible with SPMG 0502–0904 indexable inserts 15.5 mm cutting diameter for compact milling 16 mm shank for secure toolholder clamping Torx M2.2×5 fastening with T7 key Precision in a small footprint: consistent results with indexable inserts The compact design delivers a high degree of rigidity for its size, making the cutter well suited to short-run milling and finishing passes where stability matters. By accepting SPMG 0502–0904 indexable inserts, the tool enables fast insert replacement and consistent edge geometry without regrinding, which reduces machine downtime and keeps process costs predictable. The 15.5 mm cutting diameter and 2 cutting edges provide a balance between material removal rate and surface finish, while the modest mass contributes to low spindle load during acceleration. For users new to indexable tooling, an indexable insert is a replaceable cutting element that locates precisely in the cutter body, offering economic cutting-edge changes and repeatable positioning. Secure clamping and easy maintenance for uninterrupted production A 16 mm shank ensures stable clamping in common toolholders, improving concentricity and reducing chatter in short overhang setups. The insert is secured with a M2.2×5 Torx screw tightened using a T7 key, a fastening system that speeds up replacement and maintains repeatable clamping torque compared with slotted screws. The cutter’s 40 mm cutting length and 120 mm overall length suit confined workspaces and allow controlled engagement depths. At approximately 0.188 kg, the tool is light enough for rapid tool changes while still providing the mass needed for dampening vibration in interrupted cuts. Versatile workshop use and straightforward selection criteria Designed for flexibility in production environments, the tool performs well in face milling and slotting operations where a compact tool is required. The combination of a small-diameter cutter body with an indexable-insert system reduces tooling inventory complexity: only inserts need periodic replacement rather than whole cutters. Technical purchasers benefit from clear, measurable specifications — 15.5 mm diameter, 16 mm shank and defined fastening type — which simplify toolholder and spindle compatibility checks. For procurement and workshop planning, the straightforward geometry and standard fastening type make integration into existing tool sets uncomplicated and predictable. For reliable compact milling, order the Teknik Cutting Tools S820TM shank milling cutter via Metav Werkzeuge or contact the Metav specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored technical advice and rapid delivery from Emmerich. Technical Data Article number: S820TM Manufacturer: Teknik Makina Product: Shank milling cutter Compatible inserts: SPMG 0502–0904 indexable inserts Fastening: Torx screw M2.2×5, T7 key Facts Cutting diameter: 15.5 mm Number of cutting edges: 2 Overall length: 120 mm Cutting length: 40 mm Shank diameter: 16 mm Weight: 0.188 kg Special features Compact design for confined toolholders Quick insert changes via Torx fastening Files: 62de7e5033927e49dbf32749; 62de7ee633927e49dbf3278e FAQ Which indexable inserts fit this cutter? The cutter is designed for SPMG 0502–0904 indexable inserts; using the specified insert grade and geometry ensures correct seating and chip control for the S820TM shank milling cutter. How is the insert secured and what tool is required? An M2.2×5 Torx screw secures the insert; tightening and removal require a T7 key, allowing quick and repeatable insert changes for the S820TM. What applications suit this compact cutter? The tool is suitable for compact face milling and slotting tasks where a small-diameter, rigid shank milling cutter is needed; the dimensions support confined setups and short-reach operations. What are the key dimensions to check for toolholder compatibility? Check the 16 mm shank diameter, 15.5 mm cutting diameter and 120 mm overall length to ensure compatibility with the intended toolholder and to verify allowable overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable holemaking with a compact indexable design and proven insert compatibility; the robust shank and defined cutting length ensure consistent performance in serial production. Order the tool directly via Metav Werkzeuge or consult the technical team for integration advice. Teknik Makina indexable drill U305TM — 15.5 mm, for SOMT 0502 inserts The indexable drill U305TM is an insert drill optimised for medium-depth holemaking, offering a balance of reach and rigidity for production environments where fast insert changes and stable machining are required 15.5 mm diameter for medium holes Compatible with SOMT 0502 inserts (Taegutec) 20 mm cylindrical shank for secure clamping 45 mm cutting length for stable chip control Consistent machining where repeatability matters The U305TM is engineered as an indexable drill that puts repeatability at the forefront. With a defined 15.5 mm cutting diameter and 45 mm cutting length, the tool delivers predictable contact conditions that reduce variation between holes. The use of indexable inserts means cutting geometry can be restored quickly by inserting a fresh SOMT 0502 insert from Taegutec, preserving hole quality over longer production runs. This supports lean workflows by shortening maintenance intervals and maintaining consistent tolerances. Faster tool service and predictable operating costs By accepting a standard insert type, the design simplifies inventory and service routines: cutting edges are renewed rather than the whole tool being replaced. The compatibility with SOMT 0502 inserts allows straightforward sourcing of replacement tips and makes changeovers fast. The result is lower downtime and clearer cost planning for repetitive drilling tasks, while the indexable concept keeps the cutting geometry consistent without specialist regrinding equipment. Rigidity and secure clamping for stable results A 20 mm cylindrical shank and 50 mm shank length provide a solid clamping interface, reducing runout and increasing radial stiffness compared with undersized holders. The tool’s 117 mm overall length gives adequate reach for many setups while keeping overhang moderate to limit vibration. At approximately 0.175 kg, it is light enough to be handled easily yet engineered to support stable cutting when properly mounted in a compatible holder — a decisive factor for achieving repeatable roundness and surface finish. Practical dimensions for workshop integration The compact geometry of this insert drill suits typical toolholders and machine setups used in series production. With the combination of standard insert form and clearly defined lengths, the tool is simple to specify in CAM and tool lists. The modular nature of the indexable system also allows workshop planners to align spare inserts, toolholders and clamping systems efficiently, helping to streamline procurement and reduce the number of distinct tools kept in stock. Contact Metav Werkzeuge for detailed integration advice on the Teknik Cutting Tools indexable drill U305TM, technical compatibility with Taegutec SOMT 0502 inserts and to arrange supply — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: U305TM Designation: Indexable drill Manufacturer: Teknik Makina Compatible inserts: SOMT 0502 (Taegutec) Diameter: 15.5 mm Cutting length: 45 mm Shank diameter: 20 mm Shank length: 50 mm Overall length: 117 mm Weight: 0.175 kg Facts Diameter: 15.5 mm Cutting length: 45 mm Shank: 20 mm × 50 mm Overall length: 117 mm Mass: 0.175 kg Special features Indexable insert concept Compatible with Taegutec SOMT 0502 Compact overall length for moderate reach Stable cylindrical shank for reduced runout FAQ Which insert type fits this tool? The indexable drill U305TM accepts SOMT 0502 style inserts; the tool is specified for that insert form and is compatible with Taegutec-manufactured inserts of the same designation. What are the key dimensions to consider when setting up the tool? Important dimensions for the U305TM are 15.5 mm diameter, 45 mm cutting length, 20 mm shank diameter with 50 mm shank length, and an overall length of 117 mm. How does the shank size affect clamping? A 20 mm cylindrical shank provides a secure interface in standard holders; the shank diameter and length contribute to rigidity and reduced runout during drilling. Is this tool suitable for long-reach drilling? The U305TM has a moderate overall length of 117 mm; it is designed for medium-depth applications where a balance between reach and stiffness is required. What advantage does an indexable design offer compared with solid tools? Indexable designs allow rapid replacement of cutting edges, restoring geometry without replacing the whole tool. This supports reduced downtime and consistent hole quality across production batches. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Leverage a robust indexable drilling system that combines repeatable hole quality with short changeover times; the result is a more efficient machining process and lower tooling costs per hole. Benefit from a stable 20 mm shank and a 45 mm cutting length designed to keep cycles consistent. Order the drill directly via Metav Werkzeuge or request tailored advice for insert choices and clamping solutions. Indexable Insert Drill U815-1TM by Teknik Makina — 15.5 mm, 45 mm cutting length An indexable insert drill engineered for medium-depth holes and fast insert changes, ideal for production environments that require stable clamping and consistent repeatability 15.5 mm diameter for precise holes 45 mm cutting length for medium-depth drilling 20 mm shank diameter for secure clamping Compatible with SPMG 0502 indexable inserts Reliable hole quality and process stability The U815-1TM is built to deliver repeatable hole diameters and straightness over long runs. The combination of a 15.5 mm nominal diameter, a 45 mm cutting length and a rigid 20 mm shank reduces deflection and vibration during machining, which translates into fewer rejects and less rework. For workshop planners this means predictable cycle times and easier tool life forecasting. The tool’s overall length of 114 mm and compact mass also help keep toolholder moments low, supporting consistent machining when used in appropriate holders. Faster maintenance and lower operating cost per hole Designed around the SPMG 0502 insert system, the drill provides quick indexable insert changes and the option to fit inserts from established manufacturers such as Taegutec and YG-1, reducing downtime. The indexable approach shifts the economic balance from replacing whole drills to swapping small inserts, improving lifetime value and simplifying inventory: only a small stock of inserts and a single drill body are required to cover many jobs. The tool’s moderate cutting length makes it especially suited to medium-depth operations where efficient chip evacuation and predictable insert wear are priorities. Practical handling, clamping and integration in the shop Attention to the interface between spindle and tool makes the U815-1TM straightforward to integrate: the 20 mm shank ensures stable clamping in common holders and collets, while the 50 mm shank length provides secure engagement. At 0.175 kg the tool is light enough to reduce load on tool changers yet substantial enough to resist chatter in typical milling and drilling centres. Workshop managers will appreciate the uncomplicated logistics — one tool body, standard SPMG 0502 inserts and compatible options from Taegutec or YG-1 — which supports lean tooling strategies and fewer SKUs to manage. Contact Metav Werkzeuge for support with application data, insert selection and toolholder recommendations for the Teknik Cutting Tools indexable insert drill U815-1TM, supplied from Emmerich for secure and reliable delivery Technical data Article number: U815-1TM Manufacturer: Teknik Makina Data Diameter: 15.5 mm Overall length: 114 mm Cutting length: 45 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.175 kg Special features Insert type: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 FAQ Which insert type does the drill use? The drill uses SPMG 0502 indexable inserts; inserts from Taegutec and YG-1 are compatible with the U815-1TM and simplify replacement cycles. What clamping size is required? A 20 mm shank diameter is specified; the 50 mm shank engagement supports secure clamping in standard collets and holders. Is the tool suitable for deep-hole drilling? The tool is optimised for medium-depth applications with a 45 mm cutting length; for deeper holes longer specialised systems are recommended. How does the indexable system affect running costs? Using indexable inserts reduces the cost per hole because only the small insert is replaced when worn, rather than the complete drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, precise and lightweight: the knee lever features a Ø 5 mm pivot and an overall length of 15.6 mm, delivering secure actuation in confined assemblies while weighing just 0.1 kg. Benefit from dependable component supply and technical advice — order the part directly via Metav Werkzeuge or consult our specialists for application guidance. Knee Lever (Kniehebel) — compact actuation lever, Teknik Makina Kniehebel is a compact mechanical lever for precise actuation and clamping in tight industrial assemblies Compact knee lever design Ø 5 mm pivot for standard mounting Overall length 15.6 mm for confined spaces Lightweight construction at 0.1 kg Precision where space is limited The compact lever is engineered to deliver repeatable actuation in tight assemblies. With a Ø 5 mm pivot and an overall length of 15.6 mm, the unit is suited to installations where clearance is restricted and reliable mechanical movement is essential. The small mass — 0.1 kg — reduces inertia during operation, which helps improve cycle times in repetitive tasks. These measurable characteristics simplify planning for retrofit work and small-machine builds. Designed for efficient assembly and dependable operation A simple, robust mechanical design reduces complexity at the point of use and supports straightforward installation. The compact actuation lever provides consistent mechanical advantage without electrical components, meaning fewer failure modes and predictable behaviour under normal operating conditions. This focus on functional reliability supports uninterrupted workflows in production and maintenance contexts, offering a clear efficiency gain for workshop and industrial environments. Integration and mounting explained The lever’s defining dimensions — a Ø 5 mm pivot and a 15.6 mm overall length — make mounting and alignment predictable when integrating into existing mechanisms. In mechanical terms, a knee lever converts small input movement into controlled clamping or release; the compact geometry here is beneficial where a short throw and compact footprint are required. For planners and fitters, the clear dimensional data allows accurate hole and shaft preparation, reducing trial fitting and saving assembly time. For supply, compatibility advice or batch enquiries for the Teknik Makina knee lever, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations and reliable delivery. Technical data SKU: TL4BTM Manufacturer: Teknik Makina ECLASS: 21189290 Weight: 0.1 kg Diameter: 5 mm Overall length: 15.6 mm Article name: Kniehebel (knee lever) UID: TL4BTM FAQ What are the key dimensions of this knee lever? The knee lever from Teknik Makina (SKU TL4BTM) is listed with a diameter of 5 mm and an overall length of 15.6 mm, with a weight of 0.1 kg. What material is the component made from? Material information for the Teknik Makina knee lever TL4BTM is not specified in the provided technical data. Is load capacity or duty rating stated for the part? No rated load or duty class is provided in the available data for the TL4BTM knee lever. How is the lever mounted? The component indicates a 5 mm pivot diameter, which corresponds to a 5 mm mounting pin or shaft for mechanical attachment. Can this lever be used as a direct replacement in machines? Compatibility depends on the machine’s mounting geometry and functional requirements; check the listed dimensions (Ø 5 mm, 15.6 mm length) against the original part Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com