Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact, precision-focused design combined with reliable insert compatibility for efficient parting operations — order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. Parting Tool Holder — left-hand orientation, 2 mm cutting width (Teknik Makina) A Parting Tool Holder from Teknik Makina engineered for fine left-hand grooving and parting with 2C DGN inserts for turning and CNC lathes. Compact 125 mm overall length 2 mm cutting width suited for narrow grooves Compatible with 2C DGN ISCAR inserts Left-hand cutting direction High-precision parting for narrow components The holder delivers consistently precise results when executing tight parting or grooving tasks. With a 2 mm nominal cutting width, the design minimises material removal while maintaining a stable cut profile; this is particularly valuable where component tolerances are tight or scrap must be reduced. The geometry supports predictable chip flow and repeatable engagement, making the holder suitable for series production and short-run work alike. Stable clamping with a compact footprint Engineered for compact toolpost arrangements, the holder's 125 mm overall length and square clamping dimensions (12 mm × 12 mm) provide secure fixation without imposing a large overhang. The low mass (0.158 kg) reduces vibration at the cutting zone and helps maintain surface finish and dimensional accuracy. This combination of a small footprint and robust clamping makes the tool compatible with benchtop lathes and CNC turning centres where space and rigidity are critical. Interchangeable inserts and machining parameters explained Built to accept 2C DGN inserts (compatible with ISCAR standards) and identified by ISO 1212 shank designation, the holder is straightforward to integrate into existing tooling systems. The left-hand orientation must be observed when programming or setting up operations. Maximum plunge depth is 16 mm, which is the limiting engagement for safe full-depth cuts; selecting the correct insert and feed rates ensures efficient chip control and longer insert life. The holder’s 2C-L DGN shank designation indicates intended usage with standard parting inserts and allows quick replacement when tooling wear occurs. Contact Metav Werkzeuge for tailored advice on Teknik Makina parting tool holders and secure reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D726TM Manufacturer: Teknik Makina Core specifications Overall length: 125 mm Cutting width: 2 mm Maximum plunge depth: 16 mm Clamp head width: 12 mm Clamp width: 12 mm Clamp height: 12 mm Weight: 0.158 kg Design / special features Compatible with ISCAR 2C DGN inserts ISO designation: 1212 Shank designation: 2C-L DGN Cutting direction: left FAQ What types of inserts fit this holder? The holder accepts 2C DGN style inserts; it is compatible with ISCAR 2C DGN insert types and the shank designation 2C-L DGN confirms mechanical fit. What is the maximum plunge depth for safe operation? Maximum plunge depth is 16 mm; this figure should be observed to avoid over-engagement and to maintain insert life. Is this holder suitable for right-hand turning? This particular model is manufactured for left-hand cutting direction and is intended for left-hand parting and grooving applications. Can the holder be used on compact benchtop lathes? Yes — the compact 125 mm overall length and 12 mm clamping section provide a small footprint and secure fixation suited to compact lathes and constrained toolposts. How does the holder help with surface finish and vibration? The low weight (0.158 kg) combined with the short overhang reduces chatter and supports improved surface finish during narrow parting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid toolholder that combines precise clamping and narrow cutting capability for reliable parting operations; order directly via Metav Werkzeuge or request advice from our consultants for application support. Parting clamp holder — right‑hand, 12 x 12 mm shank, for 2C TD inserts (Teknik Makina) the parting clamp holder offers a compact solution for controlled parting and grooving tasks in turning operations, designed for compatibility with indexable 2C TD inserts and short overhang applications Compatible with Taegutec 2C TD inserts Right-hand cutting direction Cutting width 2 mm for narrow grooves 125 mm overall length, compact design Consistent clamping for repeatable grooves A compact holder with a 12 x 12 mm shank and a secure clamping interface is intended to reduce vibration and promote repeatable results on serial turning tasks. The relatively low mass (0.166 kg) contributes to lower inertial forces, which can be advantageous when quick accelerations or small lathe spindles are used. Where precise groove geometry matters, a firm tool seat minimises insert movement; this is particularly relevant when working to tight dimensional tolerances. The construction supports stable cutting behaviour and helps to maintain surface quality even in confined setups. Controlled, narrow cutting for fine parting work Engineered for parting and grooving with a narrow kerf, the holder accepts inserts with a 2 mm cutting width and supports a maximum parting depth of 16 mm, enabling controlled material removal in finishing and medium-depth operations. The right-hand cutting orientation is suited to standard turning setups where the tool is mounted on the right side of the workpiece. Compatibility with the 2C TD insert geometry ensures predictable chip formation and edge contact when paired with matching Taegutec grades, allowing process planners to choose the insert grade appropriate to the work material without compromising holder fit. Compact length and practical workshop adaptability With an overall length of 125 mm, the holder is designed for reduced overhang and improved rigidity in close‑quarters machining. The holder designation 2C-R TD and ISO identifier 1212 reflect its intended shank and head dimensions, making it straightforward to specify for toolroom lists and set‑ups. The compact footprint supports use on smaller turning centres and turret stations where space and access are limited, while the compatibility with established Taegutec indexable inserts helps integrate the holder into existing tooling families without extensive changeovers. For precise parting operations with Taegutec 2C TD inserts, contact Metav Werkzeuge for purchase support and application advice — Metav Werkzeuge is available from Emmerich to assist with selection and technical queries via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: D714TM Product name: Parting clamp holder Compatible inserts: Taegutec 2C TD Facts Overall length: 125 mm Shank dimensions: 12 x 12 mm Head width: 12 mm Cutting width: 2 mm Max parting depth: 16 mm Weight: 0.166 kg Cutting direction: right-hand Special features Holder designation ISO: 1212 Toolholder designation: 2C-R TD Suitable for indexable inserts: 2C TD Taegutec-compatible FAQ What inserts fit this parting clamp holder? The parting clamp holder is compatible with 2C TD indexable inserts and is specified for use with Taegutec 2C TD grades; the fit corresponds to the holder designation 2C-R TD (SKU D714TM). Is the cutting direction fixed or reversible? This holder is manufactured for a right-hand cutting direction and must be selected accordingly for the intended turning setup. What are the key dimensions for mounting and setup? Key dimensions are a 12 x 12 mm shank and an overall length of 125 mm, with a head width of 12 mm; these values are relevant for turret stations and toolpost clearances. What maximum parting depth can be achieved? The holder supports a maximum parting depth of 16 mm with a cutting width of 2 mm, suitable for narrow-groove and light to medium-depth parting applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from secure 12 x 12 mm clamping, compatibility with Korloy MGMN 200 inserts and a compact 125 mm length for space-saving setups; order via Metav Werkzeuge or contact our consultants for specification checks. Parting tool holder D010TM (MGMN 200) by Teknik Makina — 12 x 12 mm, 125 mm length A parting tool holder (MGMN 200) engineered for reliable clamping of Korloy inserts in precise parting and grooving applications across workshop turning operations. Compatible with Korloy MGMN 200 inserts 12 x 12 mm robust clamping profile Max parting depth 12 mm Includes M4x10 clamping screw, T15 key Consistent clamping for repeatable parting quality The parting tool holder D010TM delivers a stable clamping platform through its 12 x 12 mm profile, ensuring repeatable results on short-run and series production. The 12.2 mm cutting-head width and the narrow 2 mm cutting edge support fine parting operations with minimal deflection. Where process stability is essential, the combination of compact geometry and low mass (0.13 kg) reduces vibration and helps maintain surface finish quality and dimensional control. Easy integration and fast setup in the machine tool With a total length of 125 mm and an overall height of 12 mm, the holder fits compact tool posts and is suited to tight turret positions. The clamping is secured with an M4x10 hex screw driven by a T15 key, providing a straightforward and fast insert change routine that supports uptime. Compatibility with the 2C MGMN 200 configuration and Korloy MGMN inserts simplifies inventory management and reduces set-up complexity for workshops standardised on this insert family. Robust design backed by dependable supply Designed for reliable everyday use, the holder’s dimensions follow the ISO-style 1212 designation to assist in selecting matching toolholders and inserts. The lightweight construction permits rapid handling without compromising clamping stability. Sourcing through a proven distributor ensures traceable supply: Metav provides consolidated stock and a quality filter for European workshops, supporting secure delivery and consistent availability for maintenance and production replacement needs. Contact Metav Werkzeuge for tailored technical advice and reliable supply of the Teknik Makina parting tool holder D010TM; enquiries: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: D010TM Manufacturer: Teknik Makina ISO designation: 1212 Compatible inserts: Korloy MGMN 200 Bohrstangen designation: 2C MGMN 200 Dimensions & Weights Width: 12 mm Height: 12 mm Cutting head width: 12.2 mm Overall length: 125 mm Overall height: 12 mm Weight: 0.13 kg Max parting depth: 12 mm Cutting width: 2 mm Clamping screw size: M4x10 Hex key size: T15 Features & Compatibility Fits MGMN 200 insert format Compact geometry for tight turrets Low-mass design to reduce vibration Correlates with ISO 1212 tooling conventions FAQ Which insert type fits this holder? The holder accepts Korloy MGMN 200 inserts; the item is specified for the MGMN 200 insert format. What is the maximum parting depth? Maximum parting depth is 12 mm, as indicated by the holder’s stechschwert specification. What fastening hardware is supplied or required? Clamping is executed with an M4x10 screw; a T15 hex key is used to secure the insert. What are the main dimensions to check for machine compatibility? Key dimensions: 12 x 12 mm clamping profile, 125 mm overall length and 12.2 mm cutting-head width. Is the holder suitable for compact tool posts? Yes — the compact length and low overall height make it appropriate for tight turret positions and compact tool posts. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the holder's combination of rigid clamping, internal coolant and compact 12×12 mm head to secure stable left-hand turning operations; purchase through Metav Werkzeuge or request tailored advice from our consultants. Klemmhalter SVJB for VBMT Indexable Inserts — left-hand, internal coolant (Teknik Makina) Klemmhalter SVJB for VBMT Indexable Inserts is a left-hand turning toolholder engineered for secure clamping of VBMT 1103 indexable inserts and for coolant-fed machining in constrained toolpost setups. For VBMT 1103 indexable inserts Internal coolant supply to the insert Left-hand orientation, 93° approach angle Compact 12×12 mm head for tight spaces Greater machining stability through compact, rigid design The Klemmhalter SVJB is designed to deliver consistent tool support where rigidity matters. The compact 12×12 mm head and a nominal overall length of 110 mm reduce overhang and vibration, helping to improve surface finish and tool life in short‑to‑medium reach turning. The holder’s SVJBL 1212 ISO designation signals a standardised geometry that simplifies fixture planning and replacement in production environments. Built for industrial workshops, the clamping geometry and mass distribution focus on minimising chatter during interrupted cuts while keeping changeover straightforward. Cooler cutting, longer tool life An integrated internal coolant channel supplies cutting fluid directly to the insert seat, improving chip evacuation and temperature control at the cutting edge. Used with VBMT 1103 inserts this coolant feed reduces thermal wear and supports higher material removal rates on moderate to demanding applications. The holder’s 93° cutting angle combined with left-hand cutting orientation is particularly effective for facing and certain profiling tasks, where coolant-directed lubrication helps preserve edge integrity and extend insert life. Practical handling and workshop compatibility Changeover and maintenance are simplified: the clamping screw is specified as M2.5×6.5 and requires a T8 Torx key for secure fixation, while the shank is specified as J11‑F‑IK, enabling easy integration into compatible toolposts. The toolholder’s cutting height of 32 mm and modest weight of 0.11 kg make it suitable for medium-duty turrets that require precise height matching and low centrifugal load. These attributes reduce setup time, lower scrap risk and support a more predictable production flow when paired with standard VBMT inserts. Contact Metav Werkzeuge today for specialist advice on Teknik Cutting Tools SVJB toolholders and to arrange supply directly from our Emmerich facility Technical data Article number: AP558TM Manufacturer: Teknik Makina ISO designation: SVJBL 1212 Shank designation: J11-F-IK Facts Head width: 12 mm Head height: 12 mm Cutting head width: 12 mm Cutting height: 32 mm Overall height: 12 mm Overall length: 110 mm Cutting angle: 93° Weight: 0.11 kg Torx screw: M2.5×6.5 Torx key: T8 Special features Internal coolant For VBMT 1103 indexable inserts Left-hand orientation Compact 12×12 mm toolhead SVJBL 1212 geometry FAQ Which inserts are compatible with this holder? The holder is designed for VBMT 1103 indexable inserts; the seating and coolant channel match the insert geometry for reliable clamping. Does the toolholder provide coolant to the cutting edge? Yes, the holder includes internal coolant that feeds the insert seat to aid chip control and reduce temperature at the cutting edge. What is the cutting direction and approach angle? This is a left-hand holder with a 93° cutting angle, suited for left-hand turning and facing tasks. Which fastening components are required for insert clamping? Clamping is achieved with an M2.5×6.5 Torx screw; a T8 Torx key is used for tightening and removal. What shank designation and overall length should be considered for machine integration? The shank is specified as J11-F-IK and the overall length is 110 mm, which should be checked against turret capacity and toolpost clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise ISO clamping, reliable compatibility with VCMT 1103 indexable inserts and a compact 110 mm overall length for dependable left‑hand turning operations; order via Metav Werkzeuge or consult our specialists for application support. Clamping holder SVJCL 1212 — SVJC for VCMT Indexable Inserts, left‑hand — Teknik Makina The Clamping holder SVJCL 1212 is a left‑hand turning tool holder designed to carry VCMT 1103 indexable inserts for stable external turning and facing operations in small to medium lathes. *Compatible with VCMT 1103 inserts *Left‑hand orientation for reverse turning *Compact overall length 110 mm for tight setups *ISO designation SVJCL 1212 for standardised mounting Consistent cutting performance through engineered geometry The SVJCL 1212 design delivers a controlled cutting geometry that reduces vibration and improves surface finish when paired with VCMT 1103 inserts. The holder’s cutting angle of 93° and secure clamping arrangement maintain insert position under load, which enables predictable material removal rates and longer insert life. By stabilising the insert during engagement, cycle times become more consistent and tool change frequency is reduced, supporting higher throughput in production environments. Space‑saving design that keeps the workflow moving A modest overall length of 110 mm and a compact head with a 16 mm cutting‑head width allow reliable access in confined fixturing without compromising rigidity. The low mass — approx. 0.135 kg — and standard J11 shank interface simplify handling and indexing, which speeds up tool setup and reduces downtime between jobs. For workshop planners this means more efficient use of machine capacity and fewer interruptions during batch runs. Clear compatibility and practical benefits for everyday turning This turning holder accepts VCMT 1103 indexable inserts and is specified as a left‑hand tool, making it suitable for operations that require reverse cutting direction. The holder’s cutting height of 21 mm aligns insert geometry with common toolpost heights, avoiding additional shims or adjustments. The ISO marking SVJCL 1212 identifies the holder size and clamping format, ensuring interchangeability within standard tooling systems and simplifying inventory management. Robust functionality explained in plain terms An indexable‑insert holder clamps replaceable cutting tips rather than fixed single‑point cutters; this means insert replacements are quick and repeatable. The clamping mechanism on this holder secures inserts firmly to maintain the correct rake and clearance during cutting, which reduces chatter and improves repeatability. The left‑hand specification denotes the intended feed direction across the workpiece; selecting the correct orientation prevents unexpected tool marks and maximises process reliability. For secure supply and expert advice on selecting the right SVJC turning holder for a specific application, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com — +49 2822 7131930; Metav’s specialists will advise on integration and delivery. Technical data Article number: D384TM Manufacturer: Teknik Makina SKU: D384TM Facts Overall length: 110 mm Cutting height: 21 mm Holder height: 12 mm Holder width: 12 mm Cutting‑head width: 16 mm Weight: 0.135 kg Cutting angle: 93° Special features ISO designation: SVJCL 1212 Compatible inserts: VCMT 1103 Shank type: J11 Feed direction: left‑hand (reverse turning) Application: external turning and facing with indexable inserts FAQ Which inserts fit this holder? The holder is made for VCMT 1103 indexable inserts; the SVJCL 1212 clamping geometry secures the VCMT form for repeatable turning. Is this a left‑hand or right‑hand tool? This model is specified for left‑hand cutting direction, suitable for operations requiring reverse feed on the workpiece. What is the overall length and why does it matter? The overall length is 110 mm, which permits use in compact toolpost arrangements and reduces interference in tight setups. Can the holder be used on most lathes? The SVJCL 1212 holder uses a standard J11 shank interface and common ISO clamping, so it integrates with many lathe toolposts designed for indexable insert holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact clamp holder that combines internal coolant, a 93° cutting angle and secure Torx clamping for consistent turning results. The combination of precision, durability and straightforward maintenance supports reliable throughput in small-batch and serial production. Order the tool directly via Metav Werkzeuge or consult the Metav advisors for application-specific guidance. SVJC clamp holder for VCMT indexable inserts — 93° cutting angle, internal coolant by Teknik Makina The SVJC clamp holder for VCMT indexable inserts is a right‑hand turning tool holder in a flat design, made for secure clamping of VCMT 1103 inserts during steel machining and general metal turning. Internal coolant for controlled chip evacuation Compatible with VCMT 1103 indexable inserts Robust 12 × 12 mm shank dimensions Secure clamping with M2.5x6.5 Torx screw Precision and performance where it matters This turning tool holder delivers reliable machining through its 93° cutting angle, a geometry that supports stable tool engagement in interrupted cuts and difficult-to-access contours. The integrated internal coolant feed helps to evacuate chips efficiently and reduce thermal load at the cutting edge, which in turn extends the life of the insert and reduces downtime. Thanks to the compact 110 mm overall length and low mass (0.1 kg), the holder minimises vibration and improves repeatable surface finish in short‑reach turning applications. Secure clamping and straightforward servicing Clamping integrity is achieved with a M2.5x6.5 Torx screw and a corresponding T8 key, ensuring repeatable seating of the insert and fast changeovers. The flat head design gives a low profile where clearance is limited, and the holder’s 12 × 12 mm shank and 12 mm head width provide a stable interface with common tool posts. Maintenance is uncomplicated: the screw and clamping geometry are standardised for predictable torque behaviour, helping preserve seat accuracy and reducing the need for frequent adjustments. Compatibility and application scope in production Designed specifically for VCMT 1103 indexable inserts, the clamp holder supports right‑hand turning operations and is suited to general steel working and similar materials. The ISO designation SVJCR 1212 and mounting option J11‑F‑IK make it straightforward to integrate into existing tool sets; the holder’s cutting height of 32 mm aligns the insert with typical tool‑post centres used in medium‑duty lathes. When combined with appropriate inserts, the assembly offers a dependable choice for workshops seeking an efficient, repeatable turning setup. Practical advantages for workshop efficiency Choosing a compact, cooled clamp holder reduces cycle variability and helps maintain tool life under continuous use. The unit’s modest footprint and standardised fastenings mean fewer special spares and easier logistics on the shop floor. For operations balancing throughput with flexibility—such as prototype runs or mixed production—the holder provides a pragmatic compromise between rigidity and accessibility, enabling quick insert changes while maintaining consistent clamping accuracy. Order the Teknik Makina SVJC clamp holder (AP527TM) via Metav Werkzeuge for a dependable, internally cooled turning solution; contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AP527TM Manufacturer: Teknik Makina ISO designation: SVJCR 1212 Mounting reference: J11-F-IK Weight: 0.1 kg Facts Shank width: 12 mm Shank height: 12 mm Head width: 12 mm Overall length: 110 mm Total height: 12 mm Cutting height: 32 mm Cutting angle: 93° Cutting direction: right Special features Internal coolant Compatible with VCMT 1103 indexable inserts Torx screw M2.5x6.5 Torx key T8 Flat head / low‑profile design FAQ Which inserts are compatible with this clamp holder? The SVJC clamp holder is designed for VCMT 1103 indexable inserts and pairs with standard triangular VCMT‑format grades for turning tasks. Is coolant through the holder available for high‑temperature operations? Yes, the clamp holder features internal coolant to support chip control and reduce thermal stress at the cutting edge during continuous turning. What fastening hardware is required for insert changes? Insert clamping is secured with a M2.5x6.5 Torx screw; a T8 key is used for tightening and removal to ensure consistent clamping torque. Can the holder be used for left‑hand turning? This variant is specified for right‑hand cutting direction; left‑hand operations require the corresponding left‑hand version. Is the holder suitable for tight‑clearance tool posts? The flat, low‑profile head and 12 × 12 mm shank make this holder appropriate for installations with limited overhang and reduced clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from robust clamping, precise 72.5° cutting geometry and direct compatibility with VC-- 1103 indexable inserts for dependable chip control and repeatable seating; order the clamping holder via Metav Werkzeuge or consult the Metav sales team for application matching. Clamping holder SVVCN 1212 – toolholder with 72.5° cutting angle for VC-- 1103 indexable inserts (Teknik Makina) Clamping holder SVVCN 1212 engineered as a compact toolholder for secure fixing of VC-- 1103 indexable inserts in neutral cutting operations across turning and profiling tasks SVVCN 1212 for VC-- 1103 indexable inserts 72.5° cutting angle for predictable chip flow Compact 12 mm width with 6 mm head width Neutral cutting direction for bidirectional use Consistent clamping for reliable production The SVVCN 1212 clamping system provides a stable interface between insert and holder, designed to reduce vibration and positioning error. With a 72.5° approach angle the holder supports controlled chip formation, which helps to extend insert life and maintain surface quality. The compact construction — 12 mm body width and a 6 mm cut-head width — minimises overhang and contributes to improved process stability. Where repeatability and uptime matter, this toolholder reduces fixture adjustments and machining interruptions. Faster production through simple integration This toolholder is specified for a neutral cutting direction, enabling flexible setup and reducing inventory complexity when both turning directions are required. The ISO designation SVVCN 1212 and the shank code J11 allow straightforward replacement and compatibility checks in existing tool posts and turrets. At an overall length of 110 mm and a weight of 0.127 kg, the holder is easy to handle and integrates with standard toolholding systems without extensive modification, supporting quicker changeovers and less downtime. Clear compatibility and safe handling Designed for VC-- 1103 indexable inserts, the holder secures the insert firmly while allowing correct seat alignment and clamping force distribution; this lowers the risk of insert movement under load. The specified cutting height 22 mm ensures alignment with common tool stations; installation requires standard clamping screws and follows established shop-floor procedures. For workshops seeking a compact, well-specified holder, this model delivers predictable performance for medium-duty turning and profiling applications. Select the Teknik Makina SVVCN 1212 clamping holder for robust seating of VC-- 1103 inserts and contact Metav Werkzeuge for rapid delivery and technical matching — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: D142TM Manufacturer: Teknik Makina Model designation: SVVCN 1212 Suitable for inserts: VC-- 1103 Dimensions & weight Height: 12 mm Width: 12 mm Cutting head width: 6 mm Cutting height: 22 mm Overall length: 110 mm Weight: 0.127 kg Cutting angle: 72.5° Features & compatibility Neutral cutting direction Shank designation: J11 For VC-- indexable inserts ISO designation SVVCN 1212 Brand: Teknik Makina FAQ Which inserts fit this clamping holder? The holder is designed for VC-- 1103 indexable inserts and secures them in the SVVCN 1212 seat for correct orientation and clamping. Is the cutting direction fixed to one side? The toolholder has a neutral cutting direction, making it suitable for setups that require bidirectional operation. What are the critical dimensions for installation? Key installation values include a body height of 12 mm, overall length 110 mm and a cutting head width of 6 mm; these values help verify fitment in the toolpost. Can this toolholder be used for heavy roughing operations? The design prioritises stable clamping and predictable chip control; for heavy roughing, assess cutting parameters and insert grade to match the holder’s geometry and the machining forces. How is the insert secured in the holder? The holder uses a standard clamping arrangement compatible with VC-- 1103 inserts; correct torque on the clamping screw ensures secure seating and repeatable positioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tool body that combines Ø12 mm cutting performance with a 20 mm shank for secure clamping; the modular design for S12–S40 indexable inserts reduces setup time and keeps production running smoothly. Order the component via Metav Werkzeuge or consult the specialists for integration advice. Thread milling cutter by Teknik Makina — modular design for S12–S40 indexable inserts, Ø12 mm Thread milling cutter designed for precision thread generation and fast insert handling in industrial workshops Indexable insert compatibility S12–S40 12 mm cutting diameter 20 mm shank for secure clamping Torx fixing screw M2.5x7, key T8 High-precision thread production with sturdy clamping The modular milling body ensures consistent precision when producing internal and external threads; the compact Ø12 mm cutting diameter provides a reliable basis for small to medium thread forms while the 20 mm shank increases rigidity under load. Compatibility with a range of indexable insert sizes keeps tool inventories compact and repeatable quality achievable. This design reduces rework and supports tighter tolerances through stable cutting conditions and repeatable seating of the insert. Faster changeovers and predictable production output Fast insert replacement is enabled by the Torx screw M2.5x7 and T8 key, which minimise downtime and simplify maintenance procedures on the shop floor. The modular approach delivers a clear economic advantage: fewer complete tools to replace, lower stocking costs for bodies, and predictable machining cycles. For operations where throughput and machine utilisation matter, the combination of quick clamping and standardised insert formats supports continuous production with minimal interruptions. Robust integration for workshop and CNC deployment With a 75 mm overall length and a 20 mm tool shank, the tool body is designed for secure mounting in conventional collets and toolholders. The construction supports stable cutting geometry and is suitable for integration into CNC tool lists where indexable inserts are preferred for flexible thread sizes. The milling head supports standard insert types while offering a compact footprint that aids access in confined workplaces and simplifies tool change logistics across workstations. For a tailored recommendation on integrating Teknik Makina thread milling bodies into existing setups, contact Metav Werkzeuge for technical guidance and supply options. Technical data SKU: DC203TM Manufacturer: Teknik Makina Designation: Thread milling cutter for indexable inserts (Gewindeschneidfräser) Compatibility: for S12, S14, S21, S30 and S40 Indexable Inserts Core data Diameter: 12 mm Overall length: 75 mm Shank diameter: 20 mm Torx screw: M2.5x7 Torx key: T8 Special features Compatible insert size: S14 ECLASS: 21180805 ETIM: EC011860 FAQ Which insert sizes are compatible with this milling body? The milling body accepts indexable inserts listed as S12, S14, S21, S30 and S40; the tool is supplied to accommodate these standard insert formats for flexible thread machining. What are the key dimensions to check before fitting? Confirm the Ø12 mm cutting diameter, 75 mm overall length and 20 mm shank diameter when preparing toolholders; these dimensions are specified for the Teknik Makina body (SKU DC203TM). How is the insert secured and replaced? Inserts are fastened with a Torx screw M2.5x7, requiring a T8 key for quick and secure replacement, which reduces changeover time on the workshop floor. Is this tool suitable for CNC machines and manual milling centres? Yes, the compact design and standard 20 mm shank make the body suitable for both CNC tool magazines and manual milling setups where indexable insert flexibility and rapid replacement are valued. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust clamping solution that combines secure insert retention, standardised shank dimensions and a neutral cutting geometry to keep turning operations efficient. The holder’s compatibility with TCMT 16T3 indexable inserts and its right-hand configuration minimise setup complexity and support consistent surface finishes. Order the clamp holder directly via Metav Werkzeuge or request further technical advice from our consultants. Clamp holder D472TM for TCMT 16T3 indexable inserts — right-hand, 12 × 12 mm shank (Teknik Makina) A Clamp holder D472TM engineered to secure TCMT 16T3 inserts for right-hand external turning, offering standard shank dimensions for easy integration into common toolposts. Secure clamping for TCMT 16T3 inserts Right-hand cut orientation, 91° approach angle 12 × 12 mm shank fits standard toolholders Torx T15 screw with M3.5×8.5 fastener Consistent cutting geometry for reliable turning performance The clamp is built to provide secure clamping of TCMT 16T3 indexable inserts, delivering a repeatable interface between insert and holder that reduces micro-movement under load. The nominal 91° approach angle establishes a near-neutral cutting geometry that is well suited to general external turning tasks and helps to balance radial cutting forces. With a compact head and defined cutting height, the toolholder supports steady chip formation and contributes to longer insert life through reduced vibration and predictable contact conditions. Fast insert changes and maintenance-friendly fastening Designed with workshop efficiency in mind, the holder employs a Torx T15 drive and an M3.5×8.5 fastening screw for straightforward insert clamping and removal. This proven fastening standard speeds up indexable insert replacement and maintenance routines, lowering machine downtime. The combination of a clearly defined screw interface and robust clamping geometry ensures repeatable seating of the insert, minimising the need for frequent re-adjustment and thereby improving overall process uptime. Compact shank and stable construction for easy integration A 12×12 mm shank and a 16 mm cutting head width make this holder simple to fit into standard toolposts and quick-change systems common in small to medium-sized lathes. The 22.5 mm cutting height and the modest mass (approx. 0.136 kg) mean the holder contributes only minimal inertial load while maintaining the rigidity required for stable turning. Marked to ISO designation 1212 and supplied as SKU D472TM, the construction suits routine workshop applications where predictable clamping behaviour and conformity to established toolholder standards are essential. Contact Metav Werkzeuge for application advice on the Teknik Makina D472TM clamp holder and to arrange supply from our Emmerich stock. Technical data Article number: D472TM Manufacturer: Teknik Makina Product type: Clamp holder Label: Klemmhalter TCMT 16T3 ISO designation: 1212 Core data Shank width: 12 mm Shank height: 12 mm Cutting head width: 16 mm Cutting height: 22.5 mm Cutting angle: 91° Direction: right Weight: 0.136 kg Torx screw: M3.5×8.5 Torx key: T15 Special features Compatible with TCMT 16T3 indexable inserts Right-hand turning orientation SKU D472TM Compact, workshop-friendly dimensions FAQ What inserts are compatible with this clamp holder? The clamp holder is compatible with TCMT 16T3 indexable inserts; the pocket geometry and clamping arrangement are configured for that insert designation. Is this holder suitable for left-hand turning? This specific toolholder is configured for right-hand turning; a left-hand version is not indicated for SKU D472TM. What drive is required to tighten the clamping screw? A Torx T15 driver is specified for the M3.5×8.5 clamping screw used on the holder. Can the holder be mounted in standard 12 × 12 mm toolposts? Yes, the 12×12 mm shank is dimensioned for standard toolposts and quick-change adapters used in many workshops. What does the 91° cutting angle mean for machining? The 91° approach angle gives a near-neutral cutting geometry that helps distribute cutting forces predictably, aiding in stable external turning and consistent surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise M5 threading and a compact 12 mm length for secure, space-saving fastening; the Torx drive reduces cam‑out and speeds assembly. Order directly via Metav Werkzeuge or consult our product specialists for application advice. Torx screw TC083TM — M5 x 12 mm, Torx drive (Teknik Makina) Torx screw TC083TM for mechanical assemblies where compact form and reliable torque transfer are required M5 thread for standard metric assemblies Head diameter 7 mm for defined seatings Compact 12 mm overall length for confined spaces Torx drive compatible with T20 bits Consistent M5 thread for secure connections The fastener is engineered with a defined M5 thread that provides consistent engagement and predictable clamping behaviour. Where repeatability matters, the metric thread profile reduces the risk of loosening under light vibration and simplifies torque setting during assembly. The specification supports common production and maintenance environments, enabling standardised tooling and fewer inventory variants. Space-saving dimensions that simplify assembly With an overall length of 12 mm and a head diameter of 7 mm, this component is designed for installations where clearance is limited. The compact geometry allows secure fastening without protruding components, which benefits stacked or nested assemblies. Small form factor screws like this shorten installation time in cluttered assemblies and often remove the need for additional countermeasures such as washers or spacers. Torx drive for efficient torque transfer and less wear A Torx drive provides improved engagement between tool and fastener, allowing higher torque transmission with reduced cam‑out compared with slotted or Phillips drives. The drive compatibility with T20 bits enables rapid screwdriving with cordless or pneumatic drivers while protecting both the bit and the screw head from premature damage. The result is faster cycle times and lower tool‑replacement costs in production and workshop settings. Designed for straightforward procurement and workshop use Supplied under the Teknik Makina designation, the TC083TM is a practical choice for procurement managers seeking an economical, repeatable fastening solution. The concise specification and common drive type simplify stockkeeping and tool selection. For workshops, the screw’s straightforward geometry and compatibility with standard Torx tooling support quick decisions on repair and retrofit operations. For reliable fastening from Teknik Makina, contact Metav Werkzeuge to discuss compatibility, availability or to place an order for the TC083TM fastener — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TC083TM EClass: 21189290 Manufacturer: Teknik Makina Key measurements Diameter: 7 mm Thread: M5 Overall length: 12 mm Angle: 60° Weight: 0.1 kg Features and compatibility Drive type: Torx Compatible driver: T20 Torx key Fastener type: screw FAQ What driver is required for this screw? The screw is designed for a Torx drive and is compatible with a T20 Torx key or bit; this ensures efficient torque transfer for the TC083TM. Is the TC083TM suitable for tight assemblies? Yes, the overall length of 12 mm and a head diameter of 7 mm make the TC083TM appropriate for compact or recessed fastening applications. Which thread does this fastener use? The fastener uses a metric M5 thread, suitable for common metric assemblies and compatible with standard M5 threaded holes and inserts. Can this screw be used with power drivers? The Torx drive and T20 compatibility allow use with cordless and pneumatic drivers; correct torque settings should be observed to avoid over‑tightening. Who manufactures this screw? The screw is supplied under Teknik Makina and listed with article number TC083TM for procurement and stock purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of standardised metric specification, compact dimensions and straightforward drive compatibility for efficient assembly and tidy stock management; order via Metav Werkzeuge or consult the team for specification advice. Torx screw TC085TM — M5 thread, 12 mm length, Teknik Makina A Torx screw TC085TM designed for secure metric assemblies where a compact length and a Torx drive ensure repeatable fastening in workshop and industrial environments M5 metric thread 6.6 mm head diameter 12 mm overall length Compatible with T20 Torx key Reliable fastening for routine assembly work The compact fastener offers a M5 thread combined with an overall length of 12 mm, delivering a standardised connection suitable for a wide range of metric assemblies. The measured 6.6 mm head diameter provides a clear reference for clearance and countersink planning, while the listed 75° head angle clarifies seating geometry for through‑holes or tapered seats. As a standard Torx fastener, the component supports consistent torque transfer and reduced cam‑out compared with slotted or Phillips drives, which helps maintain assembly quality and reduces rework in serial production. Practical compatibility and workshop use Specified for use with a T20 Torx key, the part fits common workshop tool sets and maintenance kits, enabling quick interventions without special tooling. The screw’s classification under the provided eClass identifier supports procurement and inventory systems that rely on standard taxonomy for ordering and SKU management. The compact mass of 0.1 kg per listed unit makes it easy to calculate shipping and storage requirements for small batches, and the metric thread ensures interchangeability with typical M5 threaded components used in fixtures, panels and light mechanical assemblies. Procurement advantages and inventory simplification Selecting metric fasteners with clear dimensional data reduces ordering errors and simplifies stockkeeping; the standard M5 specification and Torx drive reduce the number of different items required. For purchasing departments and maintenance planners, the combination of a defined head diameter, length and drive type supports accurate BOM entries and faster supply‑chain turnaround. The product’s SKU (TC085TM) and manufacturer details are provided for traceability and to support quality assurance processes within production and service environments. For reliable supply of Teknik Makina fasteners such as the Torx screw TC085TM, contact Metav Werkzeuge in Emmerich for product availability and procurement support — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data Article number: TC085TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Thread: M5 Diameter: 6.6 mm Overall length: 12 mm Angle: 75° Weight: 0.1 kg Special features Drive type: Torx Suitable for key: T20 Fastener type: Screw FAQ What are the main dimensions of this fastener? The Torx screw TC085TM has an M5 thread, a head diameter of 6.6 mm and an overall length of 12 mm as specified by the manufacturer Teknik Makina. Which tool is required for installation? Installation uses a T20 Torx key; the Torx drive on the TC085TM ensures secure torque transmission during assembly. Is this screw suitable for general workshop assemblies? Yes, the metric M5 thread and compact 12 mm length make this fastener suitable for standard workshop and maintenance applications where a Torx drive is preferred. How is the product identified for ordering and stock control? Order and inventory references use the SKU TC085TM and the eClass code 21189290 to ensure correct procurement and traceability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant feed, solid‑carbide construction and standard insert compatibility for reliable small‑diameter boring and predictable tool life — order directly via Metav Werkzeuge or contact our consultants for application advice. Bohrstange — SDQC with Coolant (Teknik Makina): internal coolant, solid carbide, for DCMT 0702 inserts Bohrstange — SDQC with Coolant is a coolant‑fed boring bar set designed for small‑diameter CNC turning and finishing operations where controlled chip evacuation and repeatable insert seating are required. Internal coolant for improved chip control Solid carbide construction for long tool life Compatible with DCMT 0702 indexable inserts Set 13–16 mm with two pieces per set Increased uptime through coolant‑fed, carbide design The coolant‑fed boring bar is engineered with an integrated internal coolant channel that directs lubricant and coolant precisely to the cutting edge. This targeted delivery reduces heat at the cutting zone and supports more consistent chip formation, which in turn leads to reduced wear and fewer unplanned tool changes. Manufactured from solid carbide, the bar offers the stiffness and wear resistance expected in demanding CNC environments, enabling tighter process control and less vibration during right‑hand cutting cycles. Fast insert changes and standardised tooling for efficiency Compatibility with DCMT 0702 indexable inserts means the system uses a widely available insert form factor that simplifies stocking and shortens set‑up times. The modular approach permits quick replacement of cutting tips without complex regrinding, so productivity is improved while per‑component costs are managed. The delivery contents list includes E10K SDQCR 07 and E12M SDQCR 07, providing immediate options for common mounting arrangements and helping to streamline the transition from roughing to finish passes. Compact set for small‑diameter precision boring Supplied as a set covering 13–16 mm diameters with two pieces per set, the toolset is tailored for shops working in small part series and precision components. Each bar is lightweight — approximately 0.15 kg — which assists rapid handling and quick tool indexing in turrets or toolholders. The right‑hand cutting orientation and indexable insert interface make the set suitable for standard turning centres where reproducible concentricity and surface finish are priorities. Contact Metav Werkzeuge today for a technical consultation or to secure local supply from Emmerich — our advisors can discuss the IPS34TM set, compatible inserts and application details for optimal performance. Technical data Article number: IPS34TM Manufacturer: Teknik Makina Core specifications Weight: 0.15 kg Diameter range: 13–16 mm Pieces per set: 2 Torx key: T8 Torx screw: M2,5x5,5 ECLASS: 21180806 Materials & special features Solid carbide material Internal coolant supply Compatible with DCMT 0702 indexable inserts Includes E10K SDQCR 07 and E12M SDQCR 07 Right‑hand cutting orientation Set configuration FAQ What insert type fits this boring bar set? The boring bar set is compatible with DCMT 0702 indexable inserts; the design accepts standard DCMT geometry for quick replacement and broad availability. Does the tool provide internal coolant delivery? Yes — the SDQC version features internal coolant to the cutting edge to aid chip control and reduce thermal loading on the insert. Which diameters are included in the set? The set covers 13–16 mm diameters and is supplied as a two‑piece set for compact small‑diameter applications. What material is the bar made from? The bars are manufactured from solid carbide, providing stiffness and wear resistance suitable for precision turning. What is the SKU and who is the manufacturer? The SKU is IPS34TM and the product is supplied by Teknik Makina, sold via Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure, repeatable clamping with a compact M6 thread and a short total length for minimal interference; order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice. Locking screw TH613TM — M6 thread, 13.4 mm total length (Teknik Makina) A locking screw engineered for precision calipers and other measuring instruments, designed for reliable clamping and simple adjustment with a 2.5 mm Allen key M6 threaded connection Compact 13.4 mm total length Compatible with 2.5 mm Allen key Secure clamping for repeatable measurements The compact design centres on a M6 thread that delivers consistent axial force without adding bulk to the measuring setup. By fixing the sliding scale reliably, the component improves repeatability and reduces position drift during routine checks. This contributes to fewer re-measurements and clearer traceability in quality control protocols, turning a small mechanical part into a measurable benefit for production reliability. Straightforward adjustment and low-maintenance handling Adjustment is simplified by the 2.5 mm Allen key compatibility: installation and removal are quick, safe and require only standard workshop tooling. The 13.4 mm total length limits overhang and avoids interference with jaws or depth rods, while the lightweight construction keeps added mass to a minimum. Together, these features shorten maintenance intervals and make replacements faster, supporting efficient machine uptime and operator convenience. Suited to precision calipers and compact instruments Designed for use on precision calipers, the component integrates neatly into measuring assemblies where space and accuracy matter. The small footprint and locking capability help secure settings during transport or frequent handling, which is particularly useful in busy inspection bays and mobile measurement tasks. The part’s compatibility with common Allen keys ensures broad applicability across various dial and digital caliper models. Practical impact on workflow and measurement quality As a simple upgrade to an existing measuring instrument, the locking screw contributes directly to process stability: fewer slips, fewer resets and clearer pass/fail decisions. The result is an operational uplift that is both pragmatic and measurable — less downtime, quicker inspections and a lower risk of accidental zero shifts. For workshops aiming to streamline inspection steps, this component is a compact but effective choice. For secure and compatible components, contact Metav Werkzeuge to request the Teknik Cutting Tools locking screw (TH613TM) and receive tailored advice and supply from our Emmerich centre — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: TH613TM Name: Locking screw (Verriegelungsschraube) Manufacturer: Teknik Makina Core data Thread: M6 Total length: 13.4 mm Weight: 0.1 kg Special features Compatible with 2.5 mm Allen key for adjustment Intended for use on precision calipers Simple locking function for secure measurements FAQ What thread size does the locking screw use? The locking screw uses an M6 thread for secure fastening and standard compatibility. Which tool is required for adjustment? Adjustment requires a 2.5 mm Allen key, as stated for the component. Is this component suitable for calipers? Yes. The TH613TM locking screw is intended for precision calipers and similar measuring instruments. What are the dimensions and weight of the part? Total length is 13.4 mm and the weight is 0.1 kg for the TH613TM locking screw. Can the screw be used on other measuring tools with M6 fittings? It can be used wherever an M6 locking screw with a compact profile and 2.5 mm Allen adjustment is appropriate, though it was designed with calipers in mind. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid clamping solution that combines precise dimensions and secure fastening for reliable parting and grooving operations; order the parting clamp holder directly via Metav Werkzeuge or consult our specialists for integration advice. Parting clamp holder K834TM — 13.5 mm diameter, 125 mm overall length (Teknik Makina) Parting clamp holder K834TM for fine parting and grooving tasks on turning centres and manual lathes, engineered for repeatable clamping and stable chip evacuation 13.5 mm cutting diameter 10 mm shank diameter 125 mm overall length Torx T7 screw M2.2x6 Consistent rigidity for precise parting The K834TM offers a compact form that prioritises rigidity and repeatability in short overhang set-ups. With a 10 mm shank and 125 mm overall length, the design reduces deflection during cut-off operations, improving dimensional accuracy on small parts. The relatively light weight (0.77 kg) supports quicker tool changes and lower spindle load while maintaining stability. For shops running short-cycle production, this translates into fewer reworks and a higher first-pass yield thanks to the deliberate balance between size and mass. Secure clamping and easy maintenance A focused clamping interface and the supplied fasteners ensure secure seating of the parting insert or blade. The Torx T7 drive and M2.2x6 screw specification standardise the assembly process and simplify maintenance routines, reducing set-up time per tool change. The cutting head width of 7.6 mm and a cutting height of 15 mm permit straightforward alignment in most standard toolposts, and the compact fastener arrangement keeps contamination risk low during routine cleaning. Clear torque practice and the common Torx interface support consistent clamp preload across shifts. Designed for predictable small-part production The holder’s geometry, including the 13.5 mm effective cutting diameter and a maximum parting depth of 2 mm, is tailored to short, precise cuts typical in component finishing and sample turning. The modest section width aids chip control in applications where space is limited, and the controlled parting depth provides predictable tool life when machining ductile alloys or finishing operations. Where process reliability is paramount, the compact clamp reduces the variables affecting tool engagement and repeatability. Compatibility and workshop integration Marked with the ISO shank designation S10K, the holder integrates with a wide range of toolposts and clamping systems that accept 10 mm shanks. The designation and dimensional clarity simplify toolroom planning and spare-parts management. The combination of 125 mm length and compact head dimensions makes the holder suitable for both CNC turning centres and manual lathes used in prototyping, small-batch production or repair work, enabling straightforward inventory standardisation across different machines. Contact Metav Werkzeuge today to secure Teknik Makina’s K834TM parting clamp holder for streamlined small-part parting—our specialists in Emmerich can advise on fitment and supply; eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data SKU: K834TM Product type: Parting clamp holder Label: 13.5 mm parting clamp holder L125 mm Manufacturer: Teknik Cutting Tools Dimensions & weight Diameter: 13.5 mm Shank diameter: 10 mm Overall length: 125 mm Cutting head width: 7.6 mm Cutting height: 15 mm Max parting depth: 2 mm Weight: 0.77 kg Materials & features ISO shank designation: S10K Torx key: T7 Torx screw: M2.2x6 ECLASS: 21181005 Category: Machining / Clamping holders FAQ What materials is this holder suited for? The parting clamp holder is designed for standard turning materials where a compact clamp and limited parting depth are appropriate; material-specific tool selection should match insert geometry rather than the holder itself. How is the clamp fastened and adjusted? Assembly uses a Torx T7 drive with an M2.2x6 screw; this provides repeatable clamp preload and simplifies routine maintenance. Which machines is the holder compatible with? The K834TM fits toolposts and clamping systems that accept a 10 mm shank and is suitable for both CNC turning centres and manual lathes used in small-part production. Can the holder be used for deep grooving? This holder is optimised for short parting and grooving cuts; the specified maximum parting depth of 2 mm indicates it is best for precise, shallow operations rather than deep grooving. Is the shank standardised for easy replacement? Yes—the ISO designation S10K and the 10 mm shank allow straightforward replacement and inventory alignment across compatible toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact holder that combines a 13.5 mm cutting diameter with a robust shank Ø10 mm and a 125 mm overall length for steady parting and grooving performance; order the parting toolholder directly via Metav Werkzeuge or consult our specialists for application advice. 13.5 mm parting toolholder — 125 mm overall length, Teknik Makina 13.5 mm parting toolholder designed for precise grooving and parting operations on small to medium turning centres 13.5 mm cutting diameter 125 mm overall length Shank Ø10 mm Max cutting depth 2 mm Accurate geometry for repeatable parting results The holder is engineered with a 13.5 mm nominal cutting diameter and a shank Ø10 mm, delivering a compact footprint without compromising rigidity. The design reduces radial run-out and vibration during engagement, which translates into improved dimensional repeatability and longer insert life. The shank designation S10K ensures compatibility with standard small-shank toolposts and quick, reliable clamping. Consistent cutting performance and controlled chip formation With a cutting head width of 7.6 mm and a cutting height of 15 mm, the holder provides a stable platform for narrow-parting and grooving tasks. The max cutting depth 2 mm is optimised for routine parting operations where controlled material removal is required; this depth limit helps avoid excessive tool overhang and potential chatter. The secure clamping system, fastened with the supplied M2.2x6 Torx screw (Torx key T7), maintains stable insert positioning even under intermittent loads. Compact handling for efficient setup and tooling changes At 125 mm overall length and a mass of 0.76 kg, the holder is easy to mount, balance and manoeuvre during tool setup. The compact form factor shortens set-up times on busy shopfloors and simplifies tool-store logistics. The Torx fastening system offers consistent tightening without specialised tooling; maintenance is straightforward and limited to routine inspection of the clamping screw and insert seating. Practical benefits for workshop production This parting holder is a practical choice for workshops and production lines that require a reliable, space-saving solution for grooving and light parting tasks. The compact holder minimizes tool interference in multi-tool turrets and is suitable where small-shank configurations are specified. The combination of rigid clamping, defined cutting geometry and standardised shank designation supports predictable machining cycles and lowers the frequency of unscheduled interventions. Contact Metav Werkzeuge for supply and specification matching of the Teknik Cutting Tools 13.5 mm parting toolholder (SKU K833TM) and arrange tailored advice from our consultants Technical data SKU: K833TM Label: 13.5 mm parting toolholder L125 mm Product type: Parting toolholder Manufacturer: Teknik Makina ECLASS: 21181005 Core technical data Diameter: 13.5 mm Overall length: 125 mm Weight: 0.76 kg Cutting head width: 7.6 mm Shank diameter: 10 mm Cutting height: 15 mm Max cutting depth: 2 mm Shank designation: S10K Special features Torx key required: T7 Torx screw: M2.2x6 Compact design for small-shank toolposts FAQ What is the maximum cutting depth with this holder? The maximum cutting depth is 2 mm for the parting toolholder (SKU K833TM), which is intended for controlled, narrow parting operations. Which shank diameter does the holder use? The holder is supplied with a shank Ø10 mm (S10K designation) suitable for small-shank toolposts and compact turret stations. What fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M2.2x6 secured with a Torx T7 key to ensure consistent tightening and stable insert seating. Is the holder suitable for multi-tool turrets and small lathes? Yes, the compact 125 mm overall length and the small shank diameter make the holder suitable for multi-tool turrets and small to medium lathes where space is limited. Who manufactures this parting toolholder? The parting toolholder is produced by Teknik Cutting Tools and marketed under Teknik Makina specifications (SKU K833TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact 13.5 mm cutting diameter, stable 14 mm shank clamping and compatibility with SPMG 0502–0904 indexable inserts for efficient, low-downtime milling; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S812TM — 13.5 mm, for SPMG 0502–0904 indexable inserts (Teknik Makina) The S812TM is a shank milling cutter engineered for use with SPMG 0502–0904 indexable inserts, offering a compact 13.5 mm cutting diameter and a 14 mm shank to suit tight setups and versatile machining tasks. Compact 13.5 mm cutting diameter Compatible with SPMG 0502–0904 inserts 14 mm shank for stable clamping Supplied with M2x4.2 Torx screw (T6) Precision fit and reliable interchangeability for production stability The S812TM combines a precisely specified 13.5 mm cutting diameter with an industry-standard indexable system, allowing fast tool turnarounds and consistent geometry over repeated insert changes. By accepting SPMG-type inserts, the tool reduces set-up variability and keeps tool life predictable; this results in more consistent cycle times and fewer quality-related interruptions on the shop floor. The reduced replacement time for cutting edges contributes directly to improved process throughput. Robust clamping and compact design to reduce vibration A 14 mm shank provides secure clamping in standard toolholders, while the overall length of 120 mm balances accessibility and rigidity. The cutter’s two-cutting-edge configuration supports even load distribution during cutting, helping to lower vibration and produce a stable surface finish. The inclusion of a Torx fixing screw (M2x4.2) and T6 drive secures inserts reliably, which improves repeatability in serial machining and reduces the need for frequent re-tightening. Clear specifications for planning and tool management Numeric dimensions and compatibility details make the S812TM straightforward to integrate into an existing tooling kit: cutting length 40 mm, overall length 120 mm and a weight of 0.149 kg. The indexable-insert approach simplifies inventory—spare inserts and the S812TM body can be stocked and replaced independently—so maintenance planning and cost-per-cut calculations are easier to manage. Where quick changeovers and predictable performance are priorities, this cutter offers a pragmatic balance between compactness and functionality. For procurement assistance or application advice on the Teknik Makina S812TM, contact Metav Werkzeuge in Emmerich for tailored recommendations and logistics support: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: S812TM Product name: Shank milling cutter for SPMG 0502–0904 indexable inserts Manufacturer: Teknik Makina Numeric data Cutting diameter: 13.5 mm Number of cutting edges: 2 Shank diameter: 14 mm Cutting length: 40 mm Overall length: 120 mm Weight: 0.149 kg Features / Compatibility Torx screw: M2x4.2 (T6) Compatible inserts: SPMG 0502–0904 Compatible insert manufacturers: Taegutec FAQ Which indexable inserts fit this cutter? The S812TM accepts SPMG 0502–0904 indexable inserts; compatibility with Taegutec SPMG 0502 variants is indicated. What is the shank size and how does it affect clamping? A 14 mm shank on the Teknik Makina S812TM offers secure clamping in compatible holders, improving rigidity during machining. How many cutting edges does the tool have and what does that mean for performance? The cutter features two cutting edges, which balances chip evacuation and cutting load for many light-to-medium milling operations. What are the key lengths to consider for toolholder selection? Cutting length is 40 mm and overall length is 120 mm for the S812TM; these dimensions guide holder choice and reach planning. Which fixing screw and key size are used for insert retention? Insert retention uses an M2x4.2 Torx screw and requires a T6 key for proper tightening on the S812TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable system that combines precision and low running costs for steady, repeatable holemaking; compatible inserts and a secure 20 mm shank ensure stable clamping and long tool life. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Indexable Insert Drill U813-1TM — Ø 13.5 mm, 20 mm shank (Teknik Makina) The Indexable Insert Drill U813-1TM is designed for precision holemaking in CNC and machining-centre environments, offering a compact profile and insert-based economics for medium-depth drilling operations. Ø 13.5 mm diameter for precise holemaking 20 mm shank for secure toolholder clamping 39 mm cutting length for through and blind holes Compatible with SPMG 0502 inserts (Taegutec, YG-1) Consistent, measurable accuracy for production runs The tool delivers consistent hole quality through a short, rigid geometry that reduces deflection in repeated cycles. With a nominal diameter of Ø 13.5 mm and an overall length of 107 mm, the design balances reach and stiffness to maintain concentricity. The effective 39 mm cutting length is suitable for many common through and blind-hole requirements, improving cycle predictability and lowering scrap rates. The combination of a compact body and reduced overhang contributes directly to higher first-pass yield and quieter running at standard spindle speeds. Secure clamping and stable cutting for repeatability A 20 mm shank ensures firm engagement with modern toolholders and minimises micro-movement under load, which supports stable cutting forces and extended insert life. The short holder interface (50 mm attachment length) increases tool rigidity and is compatible with conventional DIN-style clamping systems. This stable interface translates into reliable repeatability, particularly important when multiple identical holes are produced across batch workpieces. The modest mass (0.167 kg) also aids dynamic balance and reduces spindle load during high-speed indexing. Insert compatibility that reduces tooling expense Designed for use with SPMG 0502 indexable inserts and compatible with Taegutec and YG-1 grades, the system allows rapid insert replacement and the selection of grades optimised for specific materials. Using indexable inserts reduces total tooling cost per hole compared with resharpenable or solid drills, since only the insert is renewed when wear occurs. The modular approach enables tailored cutting-edge geometry—from roughing to finishing inserts—so process engineers can trade off metal removal rate against surface finish without replacing the whole tool body. Practical applications and straightforward implementation Suitable for general workshop and industrial applications within cutting tools & CNC workflows, the tool is ideal for medium-depth holes in a variety of ferrous and non‑ferrous materials when paired with an appropriate insert grade. Its compact geometry makes it suitable for close-tolerance bores in jigs, fixtures and machined parts. For setup, standard toolholder clamping and correct insert seating are the primary requirements; ensuring correct insert grade selection and machining parameters will deliver the full benefit of the indexable system in terms of tool life and process stability. Contact Metav Werkzeuge for technical matching and availability of the Teknik Makina U813-1TM — the Metav team in Emmerich can advise on insert grades, toolholders and delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: U813-1TM Manufacturer: Teknik Makina Designation: Indexable insert drill ECLASS: 21180201 Facts Diameter: 13.5 mm Overall length: 107 mm Shank diameter: 20 mm Cutting length: 39 mm Attachment length: 50 mm Weight: 0.167 kg Insert type: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Special features Files: 62de7ec2148ec6b71020ffa5, 62de7dd70aced56449540e81 UID: U813-1TM FAQ What materials can be machined with this indexable system? The Indexable Insert Drill U813-1TM accepts inserts in different grades; with appropriate SPMG 0502 grades it can machine a wide range of materials from mild steel to aluminium and many non‑ferrous alloys. How does the 20 mm shank improve performance? A 20 mm shank provides a secure interface with standard toolholders, improving rigidity and reducing deflection, which in turn enhances the hole quality produced by the U813-1TM. Which insert manufacturers are compatible with this drill? The tool is compatible with SPMG 0502 inserts and listed to work with Taegutec and YG-1 insert ranges for quick replacement and grade selection. Is the drill suitable for blind holes as well as through holes? Yes. The 39 mm cutting length is suitable for many blind‑hole applications as well as through drilling, provided the chosen insert grade matches the material and cutting conditions. What is the overall length and how does it affect setup? The overall length is 107 mm; the compact profile improves stiffness and makes clamping setup more straightforward in confined tool magazines or tight-access machining situations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact fastening solution with a metric M8 thread, a 13.6 mm head diameter and a 29 mm overall length that ensure stable clamping on measuring instruments; order the locking screw directly via Metav Werkzeuge or ask our consultants if needed Locking screw — M8 thread, compatible with precision calipers A compact locking screw designed for secure clamping in measuring and workshop applications, offering reliable engagement with a 5 mm hex key Metric M8 thread for secure fastening 29 mm overall length for compact fit 13.6 mm head diameter for reliable grip Compatible with 5 mm Allen key Precise clamping that protects measurement integrity The M8 thread and compact profile deliver consistent clamping force where repeatability matters. Fitted to precision calipers and similar instruments, this fastener reduces axial play and helps maintain measurement accuracy over repeated use. The combination of a defined thread size and a measured 13.6 mm head diameter gives a controlled contact area, which prevents slippage while avoiding damage to delicate surfaces. Engineers and technicians benefit from a straightforward mechanical solution that supports quality control processes and reduces rework. Fast, uncomplicated installation for workshop efficiency Assembly requires only a 5 mm Allen key, making the fitting process quick and tool‑neutral in most workshop settings. The 29 mm overall length is optimised for compact instrument housings and avoids protrusion that could snag or impede handling. Because the design focuses on compatibility rather than complexity, downtime for replacement is kept to a minimum and routine adjustments become more efficient. The straightforward geometry also facilitates inspection and ensures that maintenance tasks remain predictable and fast. Built for dependable service in production and repair Supplied as SKU TC047TM, this locking element supports consistent performance in serial assembly and repair scenarios. When uniform fastening is a prerequisite for repeatable measurements, this component delivers the mechanical stability required in industrial metrology and workshop environments. The robust specification of the thread and head dimensions simplifies parts management and helps standardise spare-part inventories across toolrooms, inspection benches and service departments. To secure stable clamping for measurement tools, request supply or technical advice for the Teknik Cutting Tools locking screw TC047TM from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and immediate availability Technical data Article number: TC047TM Manufacturer SKU: TC047TM Facts Diameter (head): 13.6 mm Thread: M8 Overall length: 29 mm Weight: 0.1 kg eClass: 21189290 Special features Compatible with 5 mm Allen key Suitable for precision calipers and measuring instruments Compact design for limited‑space applications FAQ What is the standard thread size of this locking screw? The locking screw features a metric M8 thread, making it suitable for standard M8 threaded fittings in measuring devices. Which tool is required for installation? Installation and removal are performed with a 5 mm Allen key, designed for quick and secure fastening. Will the head size affect access on small calipers? The 13.6 mm head diameter balances grip and compactness to reduce interference in tight instrument housings. How is the product identified for ordering or replacement? Order or reference the part by SKU TC047TM when requesting supply or technical details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid, indexable design with a 32 mm shank and 130 mm max cutting diameter that keeps bore-enlargement cycles stable and predictable; the combination of long cutting length and CCMT insert compatibility simplifies tooling logistics. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar TKB136TM — indexable internal boring tool, CCMT 09T3 compatible (Teknik Makina) The Boring Bar TKB136TM is an indexable internal boring tool designed for diameter enlargement and internal turning operations on CNC lathes and boring machines. CCMT 09T3 insert compatibility Max cutting diameter 130 mm 32 mm robust shank diameter 115 mm effective cutting length Greater process stability from a rigid shank geometry The combination of a 32 mm shank and a substantial overall length provides increased stiffness during internal cutting, which reduces vibration and improves surface finish on the bore. A rigid toolholder translates into fewer rework cycles and more consistent part tolerances; for shops that need repeatable bore quality, this results in measurable time savings at the inspection stage. The construction supports precise, enlarged bores while maintaining cutter life when paired with suitable carbide inserts. Faster tool changes and sustained throughput with indexable inserts Built for CCMT 09T3 indexable inserts, the tool eliminates the need for full-tool regrinding and allows quick corner changes when an edge is worn. Indexable inserts are replaceable carbide tips that restore cutting geometry in seconds, helping to keep spindle downtime to a minimum and maintain production momentum. The 115 mm cutting length enables extended reach into deeper bores without compromising rigidity, which helps to sustain stable cycle times on serial production runs. Simple integration into existing toolrooms and CNC setups With an overall length of 175 mm and a clear designation as an indexable boring bar, the unit installs easily into standard toolholders and turrets. The documented weight of 3.13 kg indicates a solid build suitable for industrial use, while the clear compatibility with CCMT 09T3 inserts reduces the need for special consumables. For procurement and planning, the article is listed under SKU TKB136TM, making stock control and reordering straightforward. Contact Metav Werkzeuge for application advice on the Teknik Makina TKB136TM and to arrange supply or tooling recommendations from our specialists Technical Data Article number: TKB136TM Manufacturer: Teknik Makina Tool type: Boring bar (indexable) Core data Max cutting diameter: 130 mm Nominal diameter: 90 mm Overall length: 175 mm Shank diameter: 32 mm Effective cutting length: 115 mm Weight: 3.13 kg Special features Compatible with CCMT 09T3 inserts Indexable insert system SKU: TKB136TM FAQ What insert type does this boring bar use? The boring bar accepts CCMT 09T3 indexable inserts; the TKB136TM is designed for quick insert changes to reduce downtime. What is the maximum cutting diameter achievable with this tool? The tool supports a max cutting diameter of 130 mm, suitable for enlarged internal diameters within that range. What are the key dimensions for integration into a turret or holder? Important dimensions include a 32 mm shank diameter, 175 mm overall length, and 115 mm effective cutting length; these figures help determine holder compatibility for the TKB136TM. Is the tool suitable for deep-bore operations? The 115 mm cutting length offers extended reach for moderate depth bores while maintaining stiffness; deeper-bore requirements should be reviewed with tooling specialists. How is spare-part and reorder identification handled? Reorders and spare parts can be referenced using the SKU TKB136TM, which simplifies inventory tracking and procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise finish capability and standardised insert compatibility to streamline internal turning operations; the robust 130 mm tool body and generous 220 mm reach deliver controlled machining for medium-to-large bores. Order or request guidance via Metav Werkzeuge for reliable supply and application support. THB130TM Boring Tool for Fine Machining – 130 mm, CCMT 09T3 (Teknik Makina) The THB130TM is a precision boring tool designed for fine internal machining, compatible with CCMT 09T3 indexable inserts for consistent finish and repeatability. 130 mm tool diameter Compatible with CCMT 09T3 inserts Overall length 220 mm Max cutting diameter 190 mm Consistent finish and dimensional control for internal bores A tool tailored for fine machining delivers measurable benefits in surface quality and tolerance adherence. The THB130TM is configured around a stable 130 mm body and a 220 mm overall length, providing the reach and rigidity required for controlled internal cutting. The specification of a 190 mm maximum cutting diameter and cutting height 150 mm helps to achieve predictable set-up outcomes, reducing trial cuts and rework. For teams focused on repeatability, the combination of robust geometry and standard insert clamping supports a reliable machining process. Faster set-up and fewer interruptions in production Using an indexable insert system significantly reduces downtime compared with solid-tool regrinds. Compatibility with CCMT 09T3 indexable inserts means insert change is straightforward, restoring cutting edges in minutes and keeping throughput high. The tool’s design enables quick clamping and secure seating of the insert, which translates into shorter tool-change cycles and improved machine utilisation — a clear efficiency gain for serial production and mixed-batch work. Simplified logistics through standardised insert use Standardising on widely available CCMT 09T3 indexable inserts simplifies inventory and purchasing. The adoption of a common insert type reduces the number of spare items required in the tool crib and lowers the risk of stock-outs. For procurement and shop-floor managers, this standardisation supports smoother supply chains and predictable maintenance planning while maintaining the option to select insert grades specific to the workpiece material. Built for workshop reliability and clean tool management The holder’s dimensions and construction focus on stable clamping and straightforward handling to protect cutting edges and maintain alignment during operation. A well-engineered boring tool reduces vibration and supports better surface finishes without extensive operator intervention. Supplied by Teknik Makina, the product aligns with workshop demands for tools that are easy to fit, simple to service and compatible with established insert systems, helping to keep manufacturing schedules on track. For tailored technical advice, application recommendations or to arrange delivery from Metav Werkzeuge’s Emmerich centre, contact our team via info@metav-werkzeuge.com or call +49 2822 7131930 — assistance for selection and supply is available promptly. Technical data Article number: THB130TM Manufacturer: Teknik Makina ECLASS: 21041590 Product type: Boring tool for fine machining Facts Diameter: 130 mm Overall length: 220 mm Max cutting diameter: 190 mm Cutting height: 150 mm Design & compatibility Compatible inserts: CCMT 09T3 Indexable insert system SKU: THB130TM FAQ Which insert type fits this tool? The tool accepts CCMT 09T3 indexable inserts; this insert standard is specified for the THB130TM boring tool from Teknik Makina. What bore sizes can be machined with this boring tool? With a 130 mm tool body and a 190 mm maximum cutting diameter, the THB130TM is intended for medium-to-large internal bores within those dimensional limits. How long is the tool and what reach does it provide? The overall length of the holder is 220 mm, giving extended reach for deeper internal machining compared with shorter holders. Is this tool suitable for finishing operations? Yes — the THB130TM is specified for fine machining and is designed to support consistent surface finishes when used with suitable CCMT 09T3 grades. Where can replacement inserts or technical guidance be obtained? Replacement inserts compatible with CCMT 09T3 and further technical guidance are available through Metav Werkzeuge; the THB130TM is supported by the supplier’s product information. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable clamping, indexable-insert flexibility and long reach to reduce cycle times and tooling costs; order directly via Metav Werkzeuge or consult their technical advisors for specification matching. Ausbohrwerkzeug — indexable boring tool, compatible with CCMT 09T3, max Ø 130 mm | Teknik Makina The Ausbohrwerkzeug is a precision indexable boring tool designed for enlarging and finishing internal bores where extended reach and repeatable results are required *Indexable design for CCMT 09T3 inserts *Max cutting diameter 130 mm *32 mm robust shank for stable clamping *Total length 225 mm for deep reach Fewer tool changes thanks to indexable inserts and defined cutting range The holder accepts CCMT 09T3 indexable inserts, which allow rapid re-setting of cutting geometry without replacing the entire tool body. This indexable inserts approach reduces downtime and lowers per-operation cost compared with solid tools. With a max cutting diameter of 130 mm, the system covers a broad range of internal boring tasks while maintaining precision through repeatable insert positioning and secure clamping. Stable machining from a robust shank and mass A 32 mm shank and a total mass of 4.138 kg contribute to high rigidity during cutting, reducing chatter and improving surface finish on bored bores. The combination of a thick shank and substantial weight increases dampening at the cutting zone, so feeds and speeds can be optimised for productivity without compromising dimensional accuracy. The resultant stability supports consistent tolerances across serial production. Extended reach for deep internal operations with controlled cutting length The assembly provides a cutting length of 165 mm and an overall length of 225 mm, enabling access to deeper bores while keeping overhang to a manageable level. Longer reach is paired with a design that maintains alignment, so finishing passes remain effective and setup time is minimised. The tool is therefore suited to workflows where accessibility and retained concentricity are priorities. Maintenance efficiency and inventory benefits from replaceable inserts By using replaceable inserts, wear is isolated to small, low-cost components while the main body remains in service. This simplifies stock management and lowers tooling expenditure over time: only worn inserts need replacement rather than entire bars. The indexable format also permits rapid visual checking and fast changeovers, supporting tight production schedules and predictable maintenance intervals. For tailored advice on suitability for specific machines or components, contact Metav Werkzeuge for a specification review at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge can advise on insert choices, clamping solutions and delivery options Technical data Article number: TKB138TM Manufacturer: Teknik Makina Name: Ausbohrwerkzeug Suitable for inserts: CCMT 09T3 Facts Max cutting diameter: 130 mm Nominal diameter: 90 mm Shank diameter: 32 mm Cutting length: 165 mm Total length: 225 mm Weight: 4.138 kg Special features For indexable inserts CCMT 09T3 Indexable boring tool design SKU: TKB138TM FAQ What insert type is compatible with this boring tool? The boring tool is compatible with CCMT 09T3 indexable inserts, allowing rapid insert replacement and consistent cutting geometry. What is the maximum cutting diameter achievable with this tool? The assembly supports a max cutting diameter of 130 mm, suitable for enlarging and finishing medium-to-large internal bores. Which dimensions determine clamping stability? Clamping stability is primarily influenced by the 32 mm shank diameter and the overall mass (4.138 kg), which together reduce vibration and improve cutting stability. How long is the cutting reach for deep bores? The effective cutting length is 165 mm with a total tool length of 225 mm, offering extended reach while maintaining alignment for finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise compatibility with MGM 300 indexable inserts and a robust 20 mm clamping width for stable, repeatable grooving. Order the parting clamp holder directly via Metav Werkzeuge or consult their specialists for tailored technical guidance. Parting clamp holder MGM 300 L135mm — right-hand, 20 mm clamp width (Teknik Makina) The parting clamp holder is a right-hand grooving clamping solution for MGM 300 indexable inserts, designed to deliver secure parting and precision grooving on lathes and turning centres. Compatible with MGM 300 indexable inserts 135 mm overall length for deep grooving Clamp width 20 mm with robust clamping geometry Right-hand tool with max cutting depth 28 mm Maximise throughput with precise insert compatibility Designed for industrial turning applications, this holder accepts MGM 300 indexable inserts and is specified to match Korloy geometries, which means straightforward insert interchangeability and predictable cutting behaviour. The 135 mm overall length provides additional reach for deeper grooves or extended setups while maintaining rigidity. This combination reduces cycle variability and supports consistent machining results, helping production lines maintain output rates without compromising dimensional accuracy. Stable clamping for reduced vibration and longer tool life A firm clamping interface is essential for repeatability; the holder’s 20 mm clamp width and matching head dimensions create a low-deflection connection between tool and insert. The ISO 2020 clamp designation indicates standardised sizing for swift alignment, and the component’s mass (approx. 0.424 kg) contributes to damping unwanted chatter. Together, these factors result in improved surface finish and extended insert life, translating technical stability into tangible cost-efficiency for machining operations. Designed cutting geometry for controlled groove profiles The toolhead supports a maximum grooving depth of 28 mm and a cutting width of 3 mm, values that define the scope of parting and grooving tasks that can be performed in a single pass. The right-hand orientation is suited to standard lathe setups and enables predictable chip flow and tool engagement. By specifying these parameters, planners can match feeds and speeds to the holder’s capabilities, achieving reliable cuts while avoiding overloading and premature wear. Quick assembly and maintenance to keep machines running Installation is simplified with an M5x20 fastening screw and the supplied need for a 4 mm Allen key, enabling fast tool changes and secure fixation. The holder’s concise dimensions and standard fixing hardware mean minimal setup time when replacing inserts or performing routine checks. Supplied as SKU D671TM from Teknik Makina, the unit is engineered for straightforward integration into existing tool stacks, reducing downtime and supporting uninterrupted production schedules. Contact Metav Werkzeuge for expert advice and fast supply of Teknik Makina parting clamp holders compatible with MGM 300 inserts. Technical data Article number: D671TM Label: Stechklemmhalter MGM 300 L135mm Manufacturer: Teknik Makina eClass: 21181005 Dimensions & weight Overall length: 135 mm Clamp width: 20 mm Clamp height: 20 mm Cutting head width: 20 mm Max grooving depth: 28 mm Cutting width: 3 mm Weight: 0.424 kg Clamp designation ISO: 2020 Features & fittings Right-hand cutting direction Compatible insert manufacturer: Korloy Suitable for MGM 300 indexable inserts Fastening screw: M5x20 Allen key: 4 mm FAQ Which inserts are compatible with this holder? The parting clamp holder accepts MGM 300 indexable inserts and is specified to be compatible with Korloy inserts, ensuring correct seating and predictable cutting geometry. What is the maximum grooving depth for this tool? The holder supports a maximum grooving depth of 28 mm, enabling substantial single-pass cuts for many parting and grooving applications. What are the key dimensions that affect rigidity? Important dimensions are the 135 mm overall length and 20 mm clamp width; these together influence tool stiffness and vibration damping during cutting. How is the holder fastened and serviced? The holder uses an M5x20 fastening screw and requires a 4 mm Allen key for assembly and insert changes, facilitating quick maintenance and low downtime. Is this product ready for immediate integration into existing toolpost setups? Yes; delivered as SKU D671TM by Teknik Makina, the holder is designed for direct integration with standard lathe toolposts when used with MGM 300 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, 13 mm cutting diameter combined with internal coolant and a secure 12 mm shank for steady machining performance; order via Metav Werkzeuge or consult the technical team for quick specification advice. Boring bar A10-12K — 13 mm with internal coolant for CCMT 0602 inserts (Teknik Makina) The boring bar A10-12K is a left-hand, compact drilling and boring tool engineered for use with CCMT 0602 indexable inserts in centre lathes and CNC turning centres. Precision 13 mm shank for stable machining Internal coolant for reliable chip evacuation Compatible with CCMT 0602 indexable inserts Engineered for consistent indexable-insert performance The A10-12K is designed to deliver repeatable results when paired with CCMT 0602 indexable inserts. Its internal coolant channel directs cutting fluid close to the cutting edge, improving cooling and chip control which in turn reduces insert wear and prolongs tool life. For operations that demand predictable cycle times and minimal rework, this configuration supports higher productivity and fewer tool changes, translating technical capability into measurable process stability. Compact geometry that improves setup and clamping security A compact body with a 12 mm shank and a 13 mm cutting diameter offers a balance between rigidity and access in confined setups. The bar’s clamping interface with a 7 mm clamp width and the M2.5x5.5 Torx screw (Torx key T8) ensure a secure fit of the insert carrier, reducing micro-movement under load. The 95° cutting angle and left-hand cutting orientation make the tool suitable for specific lathe configurations and approach vectors; this geometry supports clean engagement and consistent surface finish when the assembly is correctly indexed. Practical benefits for workshop and production environments With an overall length of 125 mm and a low mass of 0.098 kg, the tool is easy to handle and quick to index into existing toolholders. The compact dimensions reduce overhang and improve stability, which helps maintain tolerance compliance in serial production. The design is especially useful where tool access is limited or where left-handed orientation is required by the machining strategy. Technical documentation and spare Torx screws are recommended to keep changeovers efficient and downtime to a minimum. Contact Metav Werkzeuge for tailored advice on how the A10-12K boring bar fits specific machining tasks and to arrange delivery from Emmerich — Metav Werkzeuge’s consultants can confirm compatibility and provide fast, practical guidance. Technical data SKU: KA508TM ISO designation: A10-12K Label: 13mm Bohrstange CCMT 0602 L125mm mit Innenkühlung Manufacturer: Teknik Cutting Tools / Teknik Makina Facts Cutting diameter: 13 mm Shank diameter: 12 mm Overall length: 125 mm Cutting height: 32 mm Clamp width: 7 mm Weight: 0.098 kg Cutting direction: left Cutting angle: 95° Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant Compatible with CCMT 0602 indexable inserts Compact design for reduced overhang Secure clamping with Torx screw FAQ Which insert type fits this boring bar? The A10-12K boring bar is made for CCMT 0602 indexable inserts and is specified to work with that geometry when mounted with the correct clamping screw and carrier. Is internal coolant available on the bar? Yes — the tool features internal coolant, which supplies cutting fluid close to the insert edge to aid cooling and chip control during operation. Can the bar be used on standard toolholders? Compatibility depends on the toolholder interface; the A10-12K’s 12 mm shank and compact length are intended for commonly used holders, but confirmation of holder dimensions is recommended before fitting. What does left-hand cutting mean for setup? Left-hand cutting indicates that cutting forces and insert orientation suit left-hand tool setups; the A10-12K should be indexed accordingly in the lathe or CNC turret to achieve the stated cutting direction. What is the SKU for ordering spare clamps or screws? The product SKU is KA508TM; use this reference when enquiring about spare screws, carriers or replacement components for the Teknik Makina boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact dimensions, secure fastening and precise geometry to keep internal turning operations efficient and repeatable; order the tool through Metav Werkzeuge or consult our specialists for application advice. 13 mm Boring Bar S10-12K — for CCMT 0602 indexable inserts (Teknik Makina) A 13 mm boring bar S10-12K designed as a compact toolholder for internal turning with CCMT 0602 indexable inserts in a right-hand cutting configuration. S10-12K boring bar, 13 mm diameter For CCMT 0602 indexable inserts Right-hand cutting, 95° cutting angle Torx T8 fixing screw M2.5x5.5 Precision fit for stable internal turning and repeatable results The compact toolholder is engineered to provide a rigid mounting platform for CCMT 0602 inserts, ensuring consistent chip formation and surface finish across production runs. With a 95° cutting angle the geometry reduces radial forces during penetration, which helps to maintain concentricity in small-diameter bores. The relatively slim 13 mm outer profile combined with a shaft diameter of 12 mm allows the holder to access confined internal features while preserving the stiffness required for stable cutting. These characteristics translate into measurable process reliability and reduced rework on turned components. Fast, service-friendly clamping and maintenance A secure fixing system minimises downtime: the Torx T8 interface paired with the M2.5x5.5 screw provides a repeatable clamp force and simple serviceability with standard workshop tools. The tool’s low mass (0.098 kg) and compact length simplify handling and tool changes at the machine, shortening changeover times. The designed cutting height of 32 mm and the clamp head width of 7 mm ensure the insert is held with adequate overhang to balance accessibility with rigidity, making routine insert changes straightforward and predictable. Compact length for confined bores and versatile set-ups With an overall length of 125 mm, the bar is tailored for short-reach internal operations and tool posts where space is limited. The unit’s geometry supports right-hand operations and is compatible with conventional toolholders and turret arrangements commonly found in turning centres. The minimal footprint facilitates tighter tool nests, enabling higher machine utilisation and flexibility in multi-op tool plans. In short-cycle production environments, the combination of compact size and standardised fixing elements supports faster throughput and consistent part quality. Contact Metav Werkzeuge for tailored guidance on integrating the Teknik Cutting Tools 13 mm boring bar S10-12K into machining setups or to request detailed compatibility information; reach our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K295TM ISO designation: S10-12K Manufacturer: Teknik Makina Data Diameter: 13 mm Shaft diameter: 12 mm Overall length: 125 mm Weight: 0.098 kg Cutting height: 32 mm Cutting angle: 95° Clamp head width: 7 mm Cutting direction: right Special features For CCMT 0602 indexable inserts Torx key: T8 Fixing screw: M2.5x5.5 SKU: K295TM FAQ Is this boring bar compatible with CCMT 0602 inserts? Yes. The 13 mm boring bar S10-12K is designed specifically to accept CCMT 0602 indexable inserts for internal turning operations. What is the overall length and usable reach of the tool? The overall length is 125 mm, which suits short-reach internal machining and tight toolpost layouts. Which driver and screw are required for clamping the insert? A Torx T8 driver engages the fixing screw specified as M2.5x5.5 for secure clamping. Is the cutting direction right-hand or left-hand? The tool is configured for right-hand cutting operations and a 95° cutting angle. What is the SKU and weight of the product? The SKU is K295TM and the tool weighs 0.098 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com