Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a robust turning solution that pairs secure clamping with a compact 25 x 25 mm shank and a 75° approach angle for stable, repeatable machining; order via Metav Werkzeuge or request advice from our consultants for optimal workshop integration. DCKNR 2525 clamping tool holder — Right-hand, 75° approach angle, for CNMG 1204 inserts — Teknik Makina The DCKNR 2525 clamping tool holder secures CNMG 1204 indexable inserts for right-hand turning operations, designed for stable insert positioning and reliable performance in CNC and manual turning applications. Right-hand turning holder, 75° approach angle For CNMG 1204 indexable inserts 25 x 25 mm shank, 32 mm head width Robust construction, 0.44 kg weight Optimised for dependable turning performance The holder is specified for a 75° approach angle, a geometry that directs cutting forces effectively for many medium-to-heavy turning tasks. With a shank size of 25 x 25 mm and an overall length of 150 mm, the tool offers a compact footprint while maintaining the rigidity required for consistent chip control. Suitability for CNMG 1204 indexable inserts ensures access to a wide range of grade and geometry options; the insert seat and clamping arrangement provide secure seat contact, which reduces chatter and contributes to predictable surface finish and dimensional stability on the workpiece. Reduced setup time and improved process reliability A straightforward clamping design and standard thread engagement mean faster insert changes and minimal downtime. The clamping screw is specified as M12, enabling robust torque transfer for a firm hold without complex accessories. Because insert movement is minimised, insert life and machine uptime are supported by the mechanical design rather than by frequent readjustment. The holder’s mass of 0.44 kg balances handling ease with damping capability, helping to absorb cutting disturbances while enabling quick manual handling during tool changes. Simple integration with workshop tooling and machines Designed in accordance with the ISO designation DCKNR 2525, compatibility with common toolpost or turret setups is straightforward. The toolhead presents a 32 mm width and a cutting height of 30 mm, dimensions that match many standard turret slide clearances and clamping geometries. Right-hand turning orientation is clearly defined for process planning, and the compact form factor supports close tool spacing on multi-station turrets. Overall, the holder’s specification focuses on reliable mechanical clamping and dimensional clarity, enabling planners and operators to select inserts and cutting parameters with confidence. Contact Metav Werkzeuge for tailored advice on Teknik Makina DCKNR 2525 holders and ensure the right configuration for workshop requirements — Metav Werkzeuge can advise on compatibility and supply directly from Emmerich Technical Data Article number: D116-1TM Manufacturer: Teknik Makina ISO designation: DCKNR 2525 Type: DCKNR for CNMG Indexable Inserts Direction: right Facts Overall length: 150 mm Shank: 25 x 25 mm Head width: 32 mm Cutting height: 30 mm Approach angle: 75° Weight: 0.44 kg Clamping screw thread: M12 Special features Suitable for CNMG 1204 indexable inserts Right-hand turning orientation ISO DCKNR 2525 toolholder design Compact form for multi-station turrets FAQ What inserts are compatible with this holder? The DCKNR 2525 clamping tool holder is compatible with CNMG 1204 indexable inserts and supports standard grades and chipbreakers suitable for turning operations. Is the holder suitable for heavy-duty turning? The holder’s 75° approach angle, compact 25 x 25 mm shank and firm clamping result in good rigidity; Teknik Makina designed this holder to perform reliably under moderate to demanding turning conditions when paired with appropriate inserts. Which direction of cut does the tool support? This toolholder is configured for right-hand turning operations, as specified in the product data. What is the SKU and who manufactures the holder? SKU D116-1TM refers to the Teknik Makina DCKNR 2525 clamping tool holder; the product is supplied by Teknik Cutting Tools and distributed via Metav Werkzeuge. What are the key dimensions to check for turret compatibility? Key dimensions include the shank 25 x 25 mm, head width 32 mm, overall length 150 mm, and cutting height 30 mm — these determine clearance and fit on turret tool posts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust right-hand toolholder that accepts standard VN--1604 indexable inserts, combining secure clamping with compact dimensions for dependable turning operations; order or request expert advice from Metav Werkzeuge to ensure optimal integration into the production workflow. Klemmhalter DVJNR 2525 — Right-hand holder for VN--1604 indexable inserts by Teknik Makina A Klemmhalter DVJNR 2525 designed as a right-hand turning toolholder for VN--1604 indexable inserts, engineered for stable clamping and repeatable torque transfer in workshop and small-series production. ISO designation DVJNR 2525 compatible with VN--1604 inserts Right-hand cutting direction for turning operations Compact overall length of 150 mm for versatile installation Secure M16 clamping interface for reliable attachment Precision fit and consistent cutting performance The holder is manufactured to interface precisely with VN--1604 indexable inserts, providing a stable platform that supports repeatable machining results. With an overall length of 150 mm and a cutter-head width of 32 mm, the design concentrates mass close to the cutting edge to reduce deflection. The 93° cutting angle is intended to deliver a favourable cutting geometry for standard turning tasks, while the clamping height of 25 mm ensures consistent insert positioning. These features translate into measurable improvements in surface finish and dimensional adherence, making the component suitable for workshops that demand predictable machining outputs. Faster set-up and dependable tool life through secure clamping A principal advantage of this toolholder is its secure clamping concept: the M16 interface and robust clamping geometry minimise micro-movement at the insert seat, which reduces chatter and prolongs insert life. Quick indexable changes are supported by the standard insert format, reducing downtime during tool changes and maintenance. The moderate mass (approx. 0.427 kg) balances rigidity with ease of handling, aiding efficient changeover routines on lathes and turning centres. For production planners, this equates to higher machine utilisation and lower scrap rates driven by the holder’s mechanical stability. Simple mounting, clear specification and workshop integration Mounting to the machine is straightforward via the supplied M16 connection; the holder’s right-hand orientation should be matched to the intended feed direction for optimal cutting performance. The ISO tag DVJNR 2525 simplifies procurement and spare-part management, as replacements and compatible inserts are widely available. Routine checks of clamp torque and insert seating are recommended to maintain the holder’s performance levels; when used with standard VN--1604 inserts it enables a predictable maintenance cadence and straightforward stock control. For production environments seeking dependable, repeatable turning capability, this compact holder supports both small-batch flexibility and consistent output quality. For reliable right-hand turning with VN--1604 indexable inserts, contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: D105TM Manufacturer: Teknik Makina Core technical data Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutter-head width: 32 mm Cutter height: 40 mm Weight: 0.427 kg Cutting angle: 93° Cutting direction: right Clamping thread / bore: M16 Special features For VN-- 1604 indexable inserts ISO designation DVJNR 2525 Right-hand turning toolholder Bezeichnung (EN): DVJN for VN-- 1604 Indexable Inserts FAQ Which insert format is compatible with this holder? The holder accepts VN--1604 indexable inserts; the DVJNR 2525 seating matches the standard insert geometry for secure clamping. Can the holder be used for left-hand cutting? This variant is designed for right-hand cutting; for left-hand operations, a left-hand counterpart is required. What connection is used to mount the holder? Mounting is achieved via an M16 clamping thread/interface as specified in the technical data. Is the toolholder suitable for production use on small lathes? Yes — with its compact 150 mm length and stable clamping, the holder is geared towards workshop and small-series production where repeatability and space efficiency matter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 95° cutting angle, a 32 mm cutting head width and the compact 150 mm overall length ensures stable engagement and predictable chip control in routine turning operations; order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed Klemmhalter DWLNL 2525 – Left-hand clamping holder with 95° cutting angle (Teknik Makina) The Klemmhalter is a left-hand clamping holder designed for DWLN indexable inserts, optimised for turning with WN-- 0804 plates in standard CNC and lathe toolposts Left-hand orientation for reversible turning ISO DWLNL 2525 size for standard mounts Compatible with WN-- 0804 inserts 95° cutting angle for stable engagement Predictable cutting performance for everyday turning The holder delivers consistent mechanical contact thanks to its 95° cutting angle and 32 mm cutting head width, which together promote reliable chip flow and reduced tool chatter. These geometric characteristics translate into fewer unplanned interruptions on the shop floor and a steady surface finish on turned parts. The design supports routine finishing and medium-roughing tasks by providing a stable tool-to-workpiece relationship that is easy to reproduce across shifts. Quick integration with existing tool systems Built to the DWLNL 2525 ISO format and accepting WN-- 0804 indexable inserts, this holder fits widely used toolpost arrangements without modification. The left-hand orientation is clearly marked for immediate installation and the clamping interface uses an M08 screw designation for secure insert fixation. Together, these specifications reduce setup time and simplify tool change procedures in mixed-production environments. Compact design that supports efficient workflows At a 150 mm overall length with a holder height of 25 mm and width of 25 mm, the unit occupies minimal space in the toolchanger while maintaining the rigidity required for reliable turning. The moderate mass of 0.793 kg contributes to balanced spindle loading and predictable dynamic behaviour, which helps to maintain repeatability in serial production. The compact footprint is particularly advantageous in confined turret stations or when multiple tooling options must be arranged close together. Robust clamping concept and practical benefits The clamping concept of this left-hand holder focuses on secure insert retention and repeatable seating, which reduces rework and setup variance. Compatibility with common WN-- 0804 inserts ensures access to a broad selection of grades and geometries for different materials and cutting conditions. Sourced from Teknik Makina and distributed via Metav Werkzeuge, the component is intended for workshops seeking straightforward, interchangeable tooling solutions backed by a consistent supply chain Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss Teknik Makina’s DWLNL 2525 clamping holder and confirm suitability for specific turning tasks Technical data Article number: D318TM Manufacturer: Teknik Makina Product: Klemmhalter (DWLN for WN-- Indexable Inserts) Height: 25 mm Cutting head width: 32 mm Width: 25 mm Cutting height: 32 mm Overall length: 150 mm Weight: 0.793 kg Cutting angle: 95° Orientation: left Features ISO designation: DWLNL 2525 Compatible inserts: WN-- 0804 Clamping screw designation: M08 Left-hand cutting direction Rapid dispatch noted in product description FAQ Which inserts fit this holder? The holder accepts WN-- 0804 indexable inserts; compatibility is specified by the DWLNL 2525 format and supports standard insert geometries for turning tasks. Is the holder left- or right-hand? This tool is configured for left-hand cutting direction and is identified accordingly for correct mounting in the turret. What clamping screw is used for insert fixation? Insert clamping is performed using an M08 screw arrangement as stated in the product specification. Is the holder suitable for heavy-duty turning? The DWLNL 2525 holder offers a 95° cutting angle and a 32 mm cutting head for stable engagement; suitability for heavy-duty applications depends on the specific cutting parameters and insert grade chosen Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from secure clamping, a 150 mm overall length and an M12 connection for reliable, repeatable turning operations; order the clamp holder directly via Metav Werkzeuge or consult the technical team for fitment advice. Clamp holder D467TM by Teknik Makina – for SCMT 1204, 150 mm, M12 The Clamp holder D467TM is a right-hand turning tool holder engineered for SCMT 1204 indexable inserts, suited to medium-reach external turning and finishing operations. Secure clamping for SCMT 1204 inserts 150 mm overall length for reach Robust M12 thread connection Right-hand 45° cutting orientation Precision that keeps production moving The turning holder is designed to deliver stable clamping and consistent cutting geometry, which reduces chatter and improves tool life. The combination of a 150 mm overall length and a 32 mm cutting head width provides a balance between reach and rigidity; this makes the component suitable for medium-length external turning tasks where dimensional consistency is required. The ISO designation 2525 indicates standardised interface geometry, supporting predictable set-up times and fewer re-measurements during tool changes. Smooth set-up and secure fastening Fastening relies on a Torx screw M5x12 tightened with a T20 key, enabling quick, repeatable assembly that limits the risk of incorrect torque. The M12 thread connection ensures a robust joint to the toolpost, while the specified 45° cutting angle and right-hand orientation match common turning operations for positive rake insert geometries. These characteristics simplify tooling decisions in mixed-production environments and contribute to lower overall downtime through fewer adjustments and reliable insert retention. Compatibility and operational advantages for workshops Compatibility with SCMT 1204 indexable inserts means access to a wide range of carbide grades and coatings for different materials and cut conditions. The holder’s 30 mm cutting height and compact 25 × 25 mm shank profile make it straightforward to integrate into existing tool systems without excessive set-up changes. The design supports efficient chip control and predictable surface finishes, which helps maintain throughput and reduces scrap rates — a clear operational benefit for maintenance teams and production planners aiming for reproducible results. For tailored advice and fast availability, contact Metav Werkzeuge — the partner for precision tools and workshop supplies close to your production floor. Technical data SKU: D467TM Product type: Clamp holder Manufacturer: Teknik Makina Dimensions / Core data Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Weight: 0.695 kg Thread: M12 Cutting angle: 45° Cutting direction: right Special features For SCMT 1204 indexable inserts ISO designation 2525 Torx screw M5x12 Torx key T20 Right-hand turning tool FAQ Which inserts fit this holder? The clamp holder accepts SCMT 1204 indexable inserts, ensuring compatibility with standard triangular finishing inserts used in external turning. Is the holder for right- or left-hand turning? This turning tool is specified for right-hand cutting and is optimised for conventional right-hand external turning applications. What fastening hardware is required? Secure fastening uses a Torx screw M5x12 tightened with a T20 key, as supplied for standard assembly procedures. What are the critical dimensions for toolpost planning? Key dimensions are 150 mm overall length, a 25 × 25 mm shank profile and a 32 mm cutting head width; these guide toolpost clearance and reach considerations. Is the clamp holder suitable for heavy roughing cuts? The design balances reach and rigidity; while suitable for many finishing and medium turning tasks, heavy roughing suitability depends on machine rigidity and insert grade selection for the intended material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure clamping and precise insert compatibility to reduce set-up time and maintain steady turning performance; order directly via Metav Werkzeuge or consult our specialists for advice. Clamping holder VER16 L150mm — 150 mm length, 25 mm shank width (Teknik Makina) The Clamping holder VER16 L150mm is a purpose-built clamping solution for holding VER16 indexable inserts in turning operations, engineered to combine repeatable fixation with quick insert changes. 150 mm overall length 25 mm shank width 27 mm cutting head width Compatible with VER16 indexable inserts Consistent clamping for reduced vibration and improved surface finish The holder is engineered to provide secure clamping through a robust head geometry and a positive clamping principle, which helps to reduce chatter and improve surface quality. With a cutting head width of 27 mm and a cutting height of 30 mm, the design ensures stable seating of VER16 inserts so that radial and axial forces are absorbed reliably. This stability supports higher productivity by lowering scrap rates and reducing the need for rework. Rapid insert changes and reliable fixation minimise downtime Insert replacement is facilitated by a Torx T15 fastening system using an M3.5×8.5 screw, enabling quick, repeatable clamping without complex procedures. The simple fastening method means tool changes can be completed swiftly, shortening machine stoppages and improving overall equipment effectiveness. The holder’s configuration is intended to be user-friendly for trained workshop staff and to allow predictable repeatability for serial production. Compact dimensions that suit versatile turning setups With a 150 mm overall length and a 25 mm shank width, the component integrates easily into standard toolposts and turrets while offering an optimal balance between reach and stiffness. The part’s moderate weight (0.675 kg) supports stable dynamics without adding unnecessary mass to the tool carriage. The ISO designation 2525 indicates the unit’s format within established tooling conventions, making it straightforward to plan for fixturing and toolpath considerations. Productive benefits for workshop reliability and process control Specifying this clamping holder in a machining cell will contribute to predictable process behaviour through repeatable seating and robust fastenings. Fewer interruptions for tool adjustment lead to improved cycle times and enhanced machine utilisation. If additional configuration data or compatibility checks are required, technical documentation can be provided to clarify mounting parameters and integration with existing toolholders. For secure, fast clamping from Teknik Makina, request the Clamping holder VER16 L150mm through Metav Werkzeuge for prompt supply and professional advice—Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D526TM Label: Klemmhalter VER16 L150mm Product type: Clamping holder Manufacturer: Teknik Makina UID: D526TM Facts Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting head width: 27 mm Cutting height: 30 mm Weight: 0.675 kg Special features For VER16 indexable inserts ISO designation: 2525 Torx key: T15 Torx screw: M3.5×8.5 FAQ Which inserts are compatible with this holder? The clamping holder is designed for VER16 indexable inserts and secures them in the 27 mm cutting head using the specified Torx screw arrangement. How are inserts fastened in the holder? Fixation is achieved with an M3.5×8.5 Torx screw tightened with a T15 key, providing repeatable and secure clamping of the VER16 insert. Is the holder suitable for serial turning applications? Yes, the holder’s robust geometry and repeatable fastening enable consistent performance in serial production and help reduce rework and scrap. What are the key dimensions to consider for integration? Key mounting dimensions are 150 mm overall length, 25 mm shank width, and 25 mm shank height, which support compatibility with common toolposts and turrets. Does the product follow tooling standards? The holder carries the ISO 2525 designation, which aids in planning integration with standard tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable clamping, precise VER16 compatibility and a compact 150 mm overall length for dependable turning operations; order directly through Metav Werkzeuge or consult our specialists for integration advice. Klemmhalter VER16 L150mm — Clamping holder for VER16 indexable inserts (Teknik Makina) Klemmhalter VER16 L150mm is a robust clamping holder engineered for turning applications with VER16 indexable inserts, offering compact form and consistent tool engagement. Secure clamp for VER16 inserts 150 mm overall length M3.5×8.5 screw fixation Torx T15 key engagement Compact 25 mm shank width Increased process stability through precise clamping The clamping toolhead is designed to deliver stable clamping and repeatable seating of VER16 indexable inserts, reducing vibration and tool chatter during turning. With a focused construction that aligns insert seating and screw fixation, the holder ensures a consistent cutting geometry. The compact shaft and head dimensions contribute to improved rigidity at the cutting point, which translates into higher surface quality and fewer rework cycles. Fast, reliable assembly and straightforward integration Engineered for straightforward fitment, the holder uses a M3.5×8.5 screw connection with Torx T15 engagement to secure the insert reliably. The slim 25 mm shank profile and 27 mm head width simplify toolpost mounting and permit close tool spacing in multi-tool setups, while the 150 mm overall length retains accessibility for a range of lathe stations. Clear mechanical interfaces make replacement and tool-change procedures efficient, supporting uninterrupted production flow. Compact dimensions that enhance versatility at the lathe The combination of a 25 mm shank width, 25 mm body height and a 27 mm cutting-head width yields a compact footprint without compromising rigidity. A cutting-height specification of 30 mm aligns the insert cutting edge with common toolpost centres, reducing the need for shims or adapters. This compact design supports both tight-turning operations and setups where tool clearance is limited, enabling flexible use across small-batch and series production. For procurement or technical advice on the Teknik Makina D521TM clamping holder, contact Metav Werkzeuge for tailored recommendations and supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D521TM Label: Klemmhalter VER16 L150mm Manufacturer: Teknik Cutting Tools (Teknik Makina) Core specifications Overall length: 150 mm Weight: 0.705 kg Shank width: 25 mm Body height: 25 mm Cutting-head width: 27 mm Cutting height: 30 mm Features & compatibility For VER16 indexable inserts Screw: M3.5×8.5 Torx key: T15 ISO designation: 2525 Product type: Clamping holder FAQ Which inserts are compatible with this clamping holder? The holder is compatible with VER16 indexable inserts; the clamping geometry is matched to the VER16 insert family for secure seating. What are the key dimensions for fitting in a toolpost? Overall length 150 mm, shank width 25 mm, body height 25 mm and cutting-head width 27 mm; cutting height is 30 mm. Which screw and key are specified for insert clamping? Insert fixation uses a M3.5×8.5 screw with Torx T15 engagement for reliable tightening. What is the article number and who manufactures the holder? Article number/SKU: D521TM; manufactured by Teknik Cutting Tools (Teknik Makina). Is the holder suitable for compact multi-tool arrangements? The compact 25 mm shank and 27 mm head width support close tool spacing and integration into multi-tool setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a combination of precise geometry and reliable clamping for stable left-hand turning operations; the toolholder’s compatibility with TN-- 1604 indexable inserts and compact dimensions ensure efficient setup and repeatable results. Order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter MTJN for TN-- Indexable Inserts — left-hand turning, MTJNL 2525 interface The Klemmhalter MTJN for TN-- Indexable Inserts is a left-hand clamping holder designed for turning applications with TN-- 1604 indexable inserts, offering compact dimensions for tight setups Left-hand cutting direction Compatible with TN-- 1604 inserts Shank height 25 mm, head width 32 mm Overall length 150 mm, weight 0.76 kg Precision geometry for consistent left-hand turning The clamping holder is engineered to provide stable, repeatable clamping and predictable tool positioning during left-hand turning. Its 93° cutting angle is designed to support the intended cutting geometry, reducing setup iterations and helping to maintain concentricity in serial production. With a 25 mm shank and a compact head width of 32 mm, the toolholder fits confined toolposts while delivering the rigidity expected in industrial turning. By matching the holder to TN-- 1604 indexable inserts, machining parameters can be standardised across batches, which improves process reliability and reduces troubleshooting time. Robust build and secure insert retention for fewer interruptions A reliable clamping concept and the defined insert seat minimise movement under cutting forces, which directly contributes to stable surface finish and longer insert life. The holder’s mass of 0.76 kg and overall length of 150 mm balance reach and stiffness for many workshop lathes. The toolholder’s interface designation MTJNL 2525 ensures compatibility with common toolpost systems, while the M16 connection detail supports secure mounting. These mechanical traits result in fewer re‑setups and a lower risk of tool-induced rejects, benefiting production workflows that prioritise uptime and predictability. Practical integration and application guidance This toolholder is intended for left-hand operations and is optimised for use with TN-- 1604 plates; check insert geometry and the machine’s toolpost clearance before final installation. The holder’s compact profile makes it suitable for operations where clearance is limited, and the 93° cutting angle helps to position the insert for controlled engagement. For users planning a retrofit or expanding a turning cell, provide the SKU D334TM and include the MTJNL 2525 designation when specifying toolholders to ensure matching components are supplied. If additional technical data or compatibility checks are required, technical advice is available to confirm fitment and best practice setup. For tailored advice and supply from our Emmerich base, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the D334TM clamping holder. Technical data Article number: D334TM Designation: Klemmhalter / MTJN for TN-- Indexable Inserts Brand: Teknik Makina SKU: D334TM Facts Shank height: 25 mm Head width (cutting head): 32 mm Shank width: 25 mm Cutting height: 35 mm Overall length: 150 mm Weight: 0.76 kg Cutting angle: 93° Mounting thread / bore: M16 ISO designation: MTJNL 2525 Special features Left-hand cutting direction Compatible with TN-- 1604 indexable inserts Designed for turning operations Compact profile for confined toolposts Stable clamping for repeatable positioning FAQ Which inserts fit this toolholder? This clamping holder is specified for TN-- 1604 indexable inserts; matching the insert geometry to the holder seat ensures correct seating and clamping. Is the holder suitable for right-hand turning? The holder is designed for a left-hand cutting direction and should be used accordingly to maintain correct tool geometry. What is the mounting connection size? The holder uses an M16 connection detail for mounting and the ISO designation MTJNL 2525 for toolpost compatibility. How does the 93° cutting angle affect use? The 93° cutting angle positions the insert for controlled engagement and is beneficial where a slightly negative approach stabilises chip formation. What information is required when ordering the product? Provide the SKU D334TM, the ISO designation MTJNL 2525, and the intended insert type (TN-- 1604) to ensure the correct configuration is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust clamping solution that delivers consistent repeatability and fast setup: the holder’s ISO MTJNR 2525 profile and compatibility with TN--1604 indexable inserts ensure secure engagement and predictable machining results, while a 150 mm overall length provides extended reach for varied turning tasks — order directly via Metav Werkzeuge or consult our technical team for application advice. Klemmhalter MTJN (MTJNR 2525) – Right-hand turning tool holder for TN--1604 indexable inserts by Teknik Makina The Klemmhalter MTJN is a right-hand lathe tool holder engineered for secure clamping of TN--1604 indexable inserts, ideally suited to medium-duty turning operations that demand repeatable positioning and stable cutting geometry. ISO MTJNR 2525 profile for secure fit Compatible with TN--1604 indexable inserts Right-hand cutting direction 150 mm overall length for extended reach Reliable clamping for repeatable machining results The holder is engineered to provide consistent clamping and repeatable tool positioning, reducing setup time and scrap rates in serial production. The MTJNR 2525 profile offers a standardised interface that aligns with established lathe tooling systems, so the assembly remains stable under cutting forces. With a mass of 0.76 kg, the component balances rigidity and manageable handling, supporting steady tool life and predictable performance in finishing and semi-finishing passes. Precision interface matched to TN--1604 inserts Designed specifically for TN--1604 indexable inserts, the tool carrier secures inserts with accurate seat geometry and a defined cutting height of 35 mm, ensuring the correct tool centreline relative to the workpiece. This precise alignment minimises rework and optimises surface finish, particularly when combined with the right-hand cutting orientation. The clear ISO designation simplifies inventory management and interchangeability across machines and setups. Geometry optimised for effective turning operations The combination of a 32 mm cutting head width and a 93° cutting angle supports predictable chip flow and controlled engagement during turning. The holder’s 25 mm height and width form a compact, rigid body that resists vibration, improving dimensional accuracy on turned components. An overall length of 150 mm extends reach for deeper features while maintaining adequate support for radial forces common in conventional lathe work. Practical benefits for workshop efficiency A standardised mounting thread (M16) and the ISO-shared design shorten changeover times and reduce the need for bespoke fixtures. The straightforward clamp arrangement simplifies insert replacement and inspection, helping to keep machine downtime to a minimum. Specifying this holder assists in consolidating tooling standards across a workshop, which supports inventory reduction and easier staff training in routine turning tasks. For specification checks, application recommendations or to order the Teknik Makina MTJN holder, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid supply. Technical Data Article number: D196TM Manufacturer: Teknik Makina Article name: MTJN for TN-- Indexable Inserts ISO designation: MTJNR 2525 Cutting direction: right Compatible inserts: TN-- 1604 Facts Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting height: 35 mm Cutting angle: 93° Weight: 0.76 kg Mounting thread: M16 Special features Right-hand turning configuration Designed for indexable inserts TN--1604 ISO MTJNR 2525 profile Compact, rigid body for reduced vibration FAQ What inserts are compatible with this holder? The holder is designed for TN--1604 indexable inserts and secures them using the ISO-compliant MTJNR 2525 seat to ensure correct seating and repeatable cutting height. Is this a right-hand or left-hand tool? This tool holder is configured for right-hand cutting, suitable for standard turning directions on conventional lathes. What is the overall length and how does it affect use? The overall length is 150 mm, offering extended reach for deeper turning operations while retaining rigidity for stable cutting performance. Can the holder be used for finishing passes? Yes. The holder’s rigid design and defined cutting height of 35 mm support finishing passes where dimensional accuracy and surface quality are required. What thread is used for mounting or accessory attachment? Mounting and accessory interfaces use an M16 designation as provided in the technical specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure clamping and proven compatibility with WNMG 0604 inserts to maintain stable, repeatable external turning operations; the combination of a 95° cutting angle and a 150 mm overall length supports consistent chip control and reduced vibration. Order via Metav Werkzeuge or request tailored guidance from their consultants for smooth integration into existing toolsets. Clamping Holder PWLN for WNMG Indexable Inserts — left‑hand turning holder, 150 mm overall length A Clamping Holder PWLN for WNMG Indexable Inserts engineered for left‑hand external turning, offering a robust seating for WNMG 0604 inserts in demanding workshop environments Secure clamp for WNMG 0604 inserts Left‑hand orientation, 95° cutting angle 150 mm overall length for stable machining Robust head: 32 mm width, 25 mm height Precise clamping for consistent turning results The holder is engineered to provide a repeatable clamp for indexable inserts, ensuring consistent axial position and rigidity during cuts. By keeping the insert firmly located, the tool reduces chatter and enables more predictable surface finish and dimensional accuracy. The PWLNL 2525 ISO designation reflects an industry‑conformant geometry, while the secure seating is particularly beneficial where process stability and short setup times are priorities. This results in fewer rejects and a steadier production rhythm for medium to heavy turning operations. Designed for left‑hand heavy‑duty machining A left‑hand orientation with a 95° cutting angle makes this holder suitable where reverse tool direction is required, for example in certain turret configurations or special lathe setups. The robust head geometry (head width 32 mm, holder height 25 mm) combines with a cutting height of 30 mm to deliver the mechanical leverage needed for deeper or interrupted cuts. Engineers and workshop planners will value the predictable load distribution, which contributes to longer insert life and lower tool‑change frequency under comparable cutting conditions. Practical dimensions and compatibility to ease tool selection With an overall length of 150 mm and a mass of 0.758 kg, the holder balances reach and rigidity for external turning tasks. It is specified for use with WNMG 0604 inserts and adopts the ISO form PWLNL 2525, making it a direct fit for established insert families. The mounting bore/thread is M06, which assists in quick integration into existing tool posts and adapters. Such clear specification simplifies procurement decisions and reduces the risk of mismatched components in the toolroom. Improve workshop throughput with standardised tooling Standardised tooling components reduce process variability and speed up set‑up times; the holder’s clear specification supports efficient stock management and repeatable machine set‑ups. Where cycle time and surface integrity matter, the combination of stable clamping and defined geometry helps to optimise cutting parameters and toolpaths. For additional reassurance, Metav Werkzeuge can supply application advice and confirm the holder’s suitability for specific materials or insert grades, enabling a pragmatic match between holder, insert and machining strategy. Contact Metav Werkzeuge for availability and application advice on Teknik Cutting Tools clamping holders (SKU P166TM) and receive tailored recommendations for integration into existing turning setups Technical data Article number: P166TM Manufacturer article/ISO: PWLNL 2525 Eclass: 21181004 Brand: Teknik Makina Dimensions & weight Overall length: 150 mm Head width: 32 mm Holder width: 25 mm Holder height: 25 mm Cutting height: 30 mm Weight: 0.758 kg Cutting angle: 95° Compatibility & features Compatible inserts: WNMG 0604 Cutting direction: left Shank/thread designation: M06 Designation (EN): PWLN for WNMG Indexable Inserts SKU: P166TM FAQ What inserts are compatible with this holder? The clamping holder is specified for WNMG 0604 indexable inserts; the ISO designation PWLNL 2525 confirms standard geometrical fit for that insert size. Is this holder suitable for left‑hand turning only? Yes, the tool is designed for left‑hand cutting direction and the geometry—including a 95° cutting angle—is optimised for reverse‑direction external turning applications. Which thread or mounting does the holder use? Mounting and fixing utilise an M06 designation for the bore/thread, facilitating installation into common tool posts and adapters that accept this interface. How does the holder contribute to machining stability? The holder’s robust head (32 mm width, 25 mm height) and secure clamping reduce vibration and ensure repeatable insert positioning, which improves surface finish and extends insert life in medium to heavy turning operations. Can this holder be integrated into an existing tool carousel or turret? Yes; with clear dimensional data (overall length 150 mm) and standardised ISO form, the holder is intended for straightforward integration into established turret and toolpost arrangements, subject to confirmation of clearances and mounting interfaces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid holding solution with a 10 x 10 mm cross-section and compatibility for 11 ER indexable inserts to secure consistent, right-hand external threads; order via Metav Werkzeuge or consult the technical team for application advice. Clamping holder (Klemmhalter) – right-hand external thread, ISO SER 1010, Teknik Makina Clamping holder (Klemmhalter) for right-hand external threading operations, designed for use with 11 ER indexable inserts and compatible with M11-ER11 toolholders. Compact 10 x 10 mm cross-section Compatible with 11 ER indexable inserts Right-hand cutting direction for external threads ISO designation SER 1010 for consistent fit Greater process stability from a compact design The holder's compact 10 x 10 mm profile provides a high stiffness-to-size ratio, which reduces vibration during threading cycles and improves thread quality. Designed to accept 11 ER indexable inserts, the toolholder ensures predictable chip control and a uniform cutting edge position; this leads to fewer rework cycles and more consistent part tolerances. The SER 1010 designation follows industry standards, supporting straightforward integration into existing lathe toolposts and modular tooling systems. Fast set-up and secure clamping for efficient shifts Set-up benefits arise from compatibility with common interfaces: the holder mates with M11-ER11 bores and presents a 150 mm overall length that suits typical workshop lathes. Cutting height of 20 mm positions the insert reliably relative to the workpiece datum, easing initial alignment. The cutting head is secured with a Torx screw M2.5x5.5 and adjusted using a Torx T8 key, providing a positive, repeatable clamping action that minimises time spent on insert changes and torque checks. The result is improved uptime and a more efficient tooling routine. Robust choice for production and trade environments At just 0.136 kg, the holder balances mass and rigidity for stable machining without adding excessive inertia to the toolpost. The right-hand cutting specification supports standard threading cycles and is suitable for a wide range of external-threading tasks where a compact, durable clamping solution is required. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component aligns with a pragmatic supply chain that emphasises availability and consistent quality for workshops and industrial users alike. Contact Metav Werkzeuge for application-specific recommendations on the Teknik Makina clamping holder (SKU D496TM) or to discuss compatibility with existing toolholders and inserts; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: D496TM Manufacturer: Teknik Makina ISO designation: SER 1010 Facts Cross-section width: 10 mm Cross-section height: 10 mm Overall length: 150 mm Cutting height: 20 mm Weight: 0.136 kg Cutting direction: right-hand Compatible insert type: 11 ER Shank/interface: M11-ER11 Torx screw: M2.5x5.5 Torx key: T8 Special features Designed for external thread applications Compact, rigid construction for vibration control Standardised ISO designation for easy integration Lightweight for reduced toolpost load Suitable for routine production threading tasks FAQ Which insert type fits this holder? The holder accepts 11 ER indexable inserts; the clamping geometry and SER 1010 designation ensure correct seating and secure retention for standard external-thread inserts. Is the holder suitable for left-hand threads? This holder is specified for a right-hand cutting direction and is intended for right-hand external threading operations. What tool interface does the holder use? The clamping holder is compatible with M11-ER11 bores and conforms to the SER 1010 mounting pattern for straightforward integration with compatible toolposts. How is the insert secured in the clamping head? The cutting head is fastened with a Torx screw M2.5x5.5, tightened and loosened using a T8 Torx key to provide repeatable clamping torque and stable insert retention. What are the dimensions and mass of the holder? The holder has a 10 x 10 mm cross-section, an overall length of 150 mm, a cutting height of 20 mm, and a mass of 0.136 kg, making it compact yet stable for production use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of secure clamping, internal coolant and precise geometry to keep turning processes consistent and predictable; request a tailored quote via Metav Werkzeuge for fast supply and expert advice. Clamping holder SVJCL 2020 – SVJC holder for VCMT/DCMT indexable inserts, left-hand, internal coolant (Teknik Makina) A robust clamping holder engineered for left-hand turning operations with VCMT/DCMT indexable inserts, designed to deliver stable tool engagement and coolant-fed machining in small- to medium-sized lathes. SVJCL 2020 design for secure insert clamping Internal coolant for improved chip evacuation Compatible with DCMT 11T3 and VCMT inserts 32 mm cutting head width for stable cutting Consistent clamping that reduces tool downtime The SVJCL 2020-style clamping holder provides a mechanically secure seat for indexable inserts, reducing micro-movement during heavy engagement. The combination of a solid clamping geometry and the specified M2.5x6.5 Torx screw (driven with a T8 key) ensures repeatable seating force and predictable tool life. For production environments where tool-change frequency affects throughput, this configuration supports longer, stable cutting intervals and a lower risk of insert chipping, which in turn reduces unplanned stoppages. Coolant-fed chip control for cleaner cuts Built with internal coolant, the holder channels cutting fluid directly to the insert pocket and cutting edge to assist chip evacuation and edge cooling. This feature improves surface finish and helps control thermal loading on both insert and workpiece during continuous turning. When paired with appropriate inserts such as DCMT 11T3, coolant-fed turning often yields a steadier process window and better control over built-up edge formation, particularly in alloyed steels and mixed materials. Geometry tuned for accurate turning performance A near-neutral 93° cutting angle and a 32 mm cutting head width give a balanced engagement that is suitable for facing and general turning tasks. The holder’s dimensions — holder height 25 mm, holder width 25 mm and cutting height 35 mm — are selected to match common toolpost and turret interfaces while providing the rigidity required for consistent cutting forces. This mechanical stability supports predictable chip formation and repeatable part tolerances when used in standard lathe setups. Straightforward fitment and machine integration With an overall length of 150 mm and a clear ISO designation SVJCL 2020, the holder integrates easily into existing tool posts and bar setups; the mounting bar reference K11-IK is supplied for compatibility checks. The unit’s weight of 0.735 kg is balanced for manual handling yet sturdy enough to resist vibration in moderate cutting regimes. Compatibility with VCMT/DCMT insert formats simplifies inventory management and tooling standardisation across multiple machines. Request a technical consultation or quote from Metav Werkzeuge for the Teknik Cutting Tools SVJCL 2020 clamping holder (AP531TM) to confirm fitment and delivery from Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical Data Article number: AP531TM Manufacturer: Teknik Makina Numbers / Core technical data Overall length: 150 mm Weight: 0.735 kg Cutting head width: 32 mm Holder height: 25 mm Holder width: 25 mm Cutting height: 35 mm Cutting angle: 93° Torx key: T8 Torx screw: M2.5x6.5 SKU: AP531TM Design & Features Left-hand orientation Internal coolant Compatible with DCMT 11T3 and VCMT inserts ISO designation: SVJCL 2020 Mounting bar designation: K11-IK FAQ Which insert types fit this holder? The holder is designed for DCMT 11T3-format inserts and is compatible with VCMT indexable inserts when specified; the SVJCL 2020 clamping geometry secures these insert formats for standard turning tasks. Does the holder provide coolant directly to the cutting edge? Yes, internal coolant is integrated into the clamping assembly so that fluid reaches the insert pocket and cutting edge, improving chip control and edge life. Is this a left-hand or right-hand holder? This toolholder is a left-hand orientation, intended for operations where the cutting direction is left-hand relative to the workpiece rotation. What fastener and key are required for the clamping screw? Clamping is achieved with a Torx screw M2.5x6.5, driven with a T8 Torx key as specified in the technical data. How does the 93° cutting angle affect machining? The 93° approach provides a near-neutral engagement that balances radial and axial loads, making the holder suitable for facing and general turning with stable force distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust left‑hand turning capability combined with ISO sizing and secure insert compatibility to maintain steady production. The SVJCL 2525 design fits VCMT 1604 inserts, offers an overall length 150 mm and a cutting height 40 mm for repeatable results; order via Metav Werkzeuge or consult the Metav team for application support. Clamping holder SVJC for VCMT indexable inserts – left‑hand, SVJCL 2525 by Teknik Makina A clamping holder engineered for left‑hand external turning, designed to accept standard VCMT 1604 indexable inserts for reliable, repeatable machining in production environments. Left‑hand cutting direction For VCMT 1604 indexable inserts ISO designation SVJCL 2525 Overall length 150 mm Stable performance for left‑hand external turning The clamping holder is configured specifically for left‑hand machining, which reduces tool changes and streamlines set‑ups where left‑hand tools are required. The secure clamp geometry and ISO SVJCL 2525 sizing ensure consistent seat location for VCMT 1604 inserts, translating to predictable cutting forces and stable chip control. For production runs, this means fewer interrupted cycles and a more consistent surface finish on turned components. Dimensions that support rigidity and surface quality With an overall length 150 mm, a shank height 25 mm and shank width 25 mm, the toolholder provides a compact, rigid interface between the machine and the insert. The cutting head width 32 mm and cutting height 40 mm position the insert for effective chip evacuation and contact stability. Reduced vibration improves tool life and workpiece finish; the holder’s mass (approx. 0.683 kg) contributes to damping without compromising manoeuvrability during set‑up. Designed for assembly and shop integration Mounting and replacement are straightforward: the unit accepts standard clamping hardware and features an M16 fixing/thread interface for secure attachment. The 93° cutting angle is optimised for common external turning profiles, enabling reliable cutting lines while using commercially available indexable inserts. The compact footprint simplifies fixturing in multi‑station or gang‑tool setups and reduces interference risk on complex parts. Operational fit for industrial turning cells Engineered for compatibility with established insert formats and ISO toolholder standards, this holder supports lean workshop processes: rapid insert exchange, predictable centre heights and repeatable orientation. The combination of standardised sizing and left‑hand orientation helps to reduce tooling variant complexity in fleets where both left and right tools are used, contributing to smoother machine workflows and fewer setup errors. For reliable left‑hand turning with VCMT inserts, request the Teknik Makina SVJCL toolholder through Metav Werkzeuge — technical advice and ordering assistance available from Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D392TM Designation: SVJC for VCMT indexable inserts Facts Overall length: 150 mm Shank height: 25 mm Shank width: 25 mm Cutting head width: 32 mm Cutting height: 40 mm Cutting angle: 93° Weight: 0.683 kg Fixing/thread: M16 Direction: left Special features Fits VCMT 1604 inserts ISO: SVJCL 2525 Left‑hand external turning Brand: Teknik Makina SKU: D392TM FAQ Which inserts fit this holder? The holder accepts VCMT 1604 indexable inserts; the seat and clamp geometry are sized for that insert form to ensure correct seating and secure clamping. Is this toolholder suitable for left‑hand turning only? Yes, the SVJCL 2525 variant is manufactured for left‑hand external turning and is defined accordingly in the data (left cutting direction). What mounting interface is used for attachment? The holder uses an M16 fixing/thread interface for secure attachment to compatible toolposts or bar holders. How does the 93° cutting angle affect machining? A 93° approach provides a near‑radial cutting geometry that balances strength at the cutting edge with effective chip flow, useful for external profiles and general turning tasks. Can this holder be used in gang tooling or multi‑station turrets? Yes; the compact overall length 150 mm and standard ISO sizing (SVJCL 2525) make it suitable for gang tool setups and turret stations where space and repeatability are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, light clamping solution that combines precise compatibility with TNMG 16 inserts and low weight for easy handling; order directly via Metav Werkzeuge or contact the consultants for application advice. Clamping wedge BK022TM — compact clamp, TNMG 16 compatibility (Teknik Makina) Clamping wedge BK022TM is a compact workholding component intended for clamping applications where TNMG 16 inserts are used, offering a lightweight option for efficient set-ups. Compatible with TNMG 16 inserts Compact clamp for tight set-ups Lightweight at 0.1 kg Teknik Cutting Tools manufacturing Accurate fit for insert tooling and steady machining The lightweight clamping solution is engineered to provide a reliable seat for indexable inserts, ensuring repeatable positioning and reduced setup time. By matching the TNMG 16 specification, the component supports standard insert geometries and helps maintain consistent cutting geometry across operations. The measured mass of 0.1 kg reduces inertia when handling and swapping fixtures, contributing to faster changeovers and improved shop-floor efficiency without compromising stability. Space-saving design for compact fixturing A compact form factor allows integration into tight toolholders and fixtures where space is at a premium. The clamp’s reduced profile supports denser tooling arrangements on turret and turret-like systems, enabling more operations per toolpost and fewer tool changes. The compactness therefore directly translates into improved throughput and simpler tool management for assemblies and small-batch production runs, while the durable construction ensures endurance under regular use. Practical handling and workshop compatibility This clamping component is suitable for standard clamping tasks in industrial environments and pairs well with typical insert-based tooling systems. The design focuses on straightforward compatibility rather than complex adapters, which simplifies inventory management and reduces the variety of spare parts required. Clear identification by SKU and manufacturer streamlines ordering and traceability in maintenance cycles, supporting reliable supply chains for production and repair. For advice on whether the BK022TM suits a specific holder or machining task, contact Metav Werkzeuge in Emmerich for technical guidance and local stock information at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: BK022TM ECLASS: 21189290 Manufacturer: Teknik Makina Core specifications Weight: 0.1 kg UID: BK022TM Special features Compatible with TNMG 16 inserts Compact clamp for tight set-ups Suitable for insert-based clamping applications FAQ What is the primary purpose of this clamping component? The BK022TM clamping wedge is intended for workholding in insert-based machining where TNMG 16 compatibility is required, providing a compact clamp solution for fixture set-ups. Is the BK022TM compatible with TNMG 16 inserts? Yes, the component is specified for use with TNMG 16 inserts and is designed to match their seating geometry for reliable positioning. How heavy is the clamping wedge? The clamping wedge BK022TM has a weight of 0.1 kg, which supports easy handling and quick tool changes. Who manufactures the BK022TM? The BK022TM is manufactured by Teknik Cutting Tools and supplied under Teknik Makina designation; ordering and responsibility are handled via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, easily integrated clamping solution that combines precise compatibility with TNMG 22 standards and low handling weight for faster set-up. Order via Metav Werkzeuge or consult the team for application support. Clamping prong — compact clamping element, compatible with TNMG 22 by Teknik Makina Clamping prong for precision clamping tasks in workshop and turning tool set-ups, designed to interface with TNMG 22 insert standards. Compatible with TNMG 22 inserts Lightweight 0.1 kg for easy handling Designed for workshop clamping use Teknik Makina product Reduced set-up time through standardised compatibility A compact clamping prong that matches the widely used TNMG 22 insert designation provides a straightforward method to harmonise tool holders and turning inserts across a production line. The standard compatibility reduces the need for individual adjustments and minimises adaptor inventories, which leads to measurable time savings during tool changes. The low mass of 0.1 kg contributes to faster handling without compromising the clamping interface, and the component is suitable for integration into existing clamping assemblies where standard TNMG interfaces are employed. Compact design that supports efficient workflows The small footprint and modest weight make the component practical for busy workbenches and automated tool changers. A focus on simple geometry ensures the element can be installed and removed rapidly, improving throughput in repetitive turning or clamping tasks. Where interchangeability is required, the clear reference to TNMG 22 simplifies purchasing and stock management, while the compact form factor reduces required storage space and handling effort in the workshop environment. Consistent performance as a dependable spare part Specified and supplied by Teknik Cutting Tools, the part is intended as a reliable spare or replacement component to keep processes running. Its predictable interface characteristics support repeatable clamping behaviour, helping to avoid downtime caused by mismatched components. Delivered and filtered through Metav Werkzeuge’s European distribution, the item benefits from a quality-control approach that prioritises consistent product behaviour for industrial and trade customers. Contact Metav Werkzeuge for tailored advice on Teknik Makina clamping prongs and compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and application details Technical data SKU: BK023TM ECLASS: 21189290 Manufacturer: Teknik Makina Suitable for: TNMG 22 Weight: 0.1 kg Facts Weight: 0.1 kg ECLASS code: 21189290 Special features Compatible with TNMG 22 Product type: clamping prong UID: BK023TM FAQ What does TNMG 22 compatibility mean for workshop integration? TNMG 22 denotes a standard turning insert designation; the clamping prong (BK023TM) by Teknik Cutting Tools is specified to interface with inserts of that class, simplifying integration into existing toolholder systems. Is the clamping prong suitable as a spare for existing assemblies? Yes, the BK023TM clamping prong is intended for use as a replacement or spare part and is supplied through Metav Werkzeuge to support uninterrupted production. How heavy is the component and what handling advantages does that offer? The unit weighs 0.1 kg, which aids quick manual handling and reduces effort during frequent tool changes while maintaining the required interface geometry. Which manufacturer produces this clamping prong? The part is produced by Teknik Cutting Tools and distributed under the Teknik Makina designation; stock and despatch are managed via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-focused accessory that ensures secure holding for caliper-based measurements; the combination of lightweight construction and direct compatibility with RDMT 16 supports faster set-ups and consistent measurement results — order the clamping component via Metav Werkzeuge for reliable supply and expert consultation. Clamping jaw — precision accessory for RDMT 16 (Teknik Cutting Tools) A clamping jaw designed as an accessory for precision calipers, optimised for secure holding during measurement and inspection tasks. Compatible with RDMT 16 calipers Compact design, weight 0.1 kg Precision clamping interface Teknik Cutting Tools original accessory Faster, more reliable measurement through precise clamping The compact clamping jaw simplifies fixture work during inspection and routine measurement tasks by providing a stable point of contact for caliper-mounted probes and attachments. Its low mass (approx. 0.1 kg) reduces inertia during adjustments, enabling quicker alignment and fewer readjustments. This results in measurable time savings on repetitive measuring tasks and a reduced risk of slippage that can cause measurement deviations. The result is a workflow that is both efficient and consistently repeatable. Clear compatibility and straightforward installation Designed specifically for compatibility with the RDMT 16 caliper interface, the component integrates with existing caliper setups without the need for bespoke adaptors. The direct fit reduces assembly time and avoids unnecessary inventory of multiple adapter types. Installation is carried out via the caliper’s standard mounting points and the accessory’s clamping interface, providing a robust mechanical connection that supports precise alignment during inspection sequences. Practical handling and quality assurance for workshops Lightweight construction and a small footprint make the accessory suitable for bench work and mobile inspection kits. As a dedicated caliper accessory from Teknik Cutting Tools, the item supports stable measurements in confined workplaces and on-site checks where compactness matters. The design focuses on functional reliability rather than unnecessary extras, making it a pragmatic choice for toolrooms and quality departments seeking a dependable clamping solution for caliper-assisted measurement. For reliable supply of the Teknik Cutting Tools clamping jaw and expert advice on integration with RDMT 16 calipers, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for personalised support and prompt delivery Technical Data Article number: BK035TM Manufacturer: Teknik Cutting Tools SKU: BK035TM Compatible with: RDMT 16 calipers Data Weight: 0.1 kg eClass: 21189290 Special features Clamping jaw for precision measurement Precision clamping interface Compact design suitable for bench and mobile use FAQ What calipers is this accessory compatible with? The clamping jaw is compatible with RDMT 16 calipers and designed to mount directly to the caliper’s standard interface. How heavy is the clamping accessory? The accessory weighs approximately 0.1 kg, making it lightweight for mobile and bench inspection tasks. Can the clamping jaw be used with other caliper models? Compatibility is specified for RDMT 16; use with other models cannot be guaranteed without checking the respective mounting interfaces. Is this an original Teknik Cutting Tools product? Yes, the accessory is supplied as a Teknik Cutting Tools clamping component and is listed under SKU BK035TM. What does the clamping jaw improve in measurement routines? By providing a secure hold and stable point of contact, the clamping jaw reduces readjustment time and helps maintain consistent measurement alignment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, workshop-friendly clamping solution that combines precision clamping with quick integration into existing turning setups; order directly via Metav Werkzeuge or consult the specialists for fitment advice. Spannpratze — clamping wedge with VNMG 16 compatibility by Teknik Makina The Spannpratze is a compact clamping wedge designed for secure holding of turning inserts and fast, repeatable set-ups in machining and workshop environments. Precision clamping for turning inserts Compatible with VNMG 16 holders Extremely lightweight at 0.1 kg Optimised for workshop and production use Faster set-ups through consistent clamping Reliable and repeatable holding is achieved by the device’s precision clamping geometry, which is configured for use with VNMG turning insert arrangements. Consistency in the clamping action reduces the need for repeated adjustments and minimises downtime during tool changes. The compatibility with the VNMG 16 standard ensures a predictable interface with many common insert holders, allowing quick replacement of worn inserts and a simplified tooling inventory. Handling is eased by the 0.1 kg mass, which supports efficient manual changeovers without excess operator fatigue. Designed to integrate with existing turning toolchains A compact clamping wedge like this is intended to fit into established toolholder systems with minimal modification. Integration is straightforward where VNMG 16 interfaces are present, so the clamping element can be introduced to standard turning operations without redesigning the toolholder. This reduces complexity in procurement and spares management while maintaining machining accuracy. The solution is therefore suited to both small workshops and production lines that demand dependable repeatability. Clear machining benefits and practical advantages By securing inserts reliably, the clamping wedge supports improved surface finish and dimensional consistency in turned parts. The mechanism focuses on holding force and positional stability; as a result, cutting parameters can be exploited more effectively and process stability is enhanced. Where traceable, repeatable clamping is required for batch work or serial production, the component contributes to lower scrap rates and fewer stoppages for rework. Technical simplicity also means shorter training time for shopfloor staff. Supply reliability and trusted sourcing from Metav Procurement from an established partner reduces the logistical risk often associated with single-item purchases. Metav acts as a quality filter for the European market and maintains a broad assortment of workshop equipment; the wider offering and the volume of regular customers provide assurance of continued availability and consistent standards. For machining operations seeking a straightforward clamping solution with rapid integration into VNMG-based toolholders, this component represents a practical choice. For procurement or technical clarification regarding the Teknik Makina clamping wedge (SKU BK021TM), contact Metav Werkzeuge for ordering and expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 — local stock and technical consultancy are available through Metav Werkzeuge Technical data Article number: BK021TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 UID: BK021TM Special features Compatibility: VNMG 16 holders Product name: Spannpratze FAQ What is the primary application of this clamping wedge? The clamping wedge is intended for securing turning inserts in common VNMG 16 holder configurations and is used where repeatable holding and quick insert changes are required. Is the clamping wedge compatible with existing VNMG toolholders? Yes, the component is specified for VNMG 16 compatibility so it integrates with holders designed to that insert standard; the SKU BK021TM from Teknik Makina matches that interface. How does the lightweight design affect workshop use? The low mass (0.1 kg) simplifies manual handling and rapid changeovers, contributing to faster set-ups and reduced operator fatigue during repetitive operations. Can this component support production-level repeatability? When mounted in a correctly specified VNMG 16 holder, the clamping wedge provides consistent clamping behaviour that supports repeatable machining results in both workshop and production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, precise and ready for workshop use: the compact clamping jaw delivers stable holding with clear compatibility for KNUX‑R calipers, while the lightweight construction (approx. 0.1 kg) keeps handling effortless. Order the component directly via Metav Werkzeuge or consult our specialists for technical guidance. Clamping jaw BK028TM (Teknik Makina) — Compatible with KNUX‑R calipers, lightweight A clamping jaw designed as a practical accessory for KNUX‑R calipers, intended to provide reliable holding in measurement and small‑part handling applications. Compatible with KNUX‑R calipers Compact clamping jaw design Weighs approx. 0.1 kg Teknik Makina quality component Precise hold for repeatable measurement setups The primary advantage of this accessory is its contribution to precision in routine measuring tasks. As a specialised jaw for caliper applications, the component secures small parts during inspection and aids in repeatable positioning. The simple form factor reduces mechanical play at the contact point and therefore lowers measurement scatter; this makes it a suitable addition for workshops that require consistent results from hand‑held measuring tools. The translated function of the original designation is reflected in the accessory's role: a compact, dedicated clamping jaw that complements existing caliper workflows. Lightweight design for comfortable handling and fast tool changes At approximately 0.1 kg, the accessory is intentionally lightweight, which eases hand‑held operation and frequent changes between measuring tasks. The low mass reduces operator fatigue during repetitive inspections and simplifies alignment when working with small components. This design approach supports quicker process cycles on the shop floor while maintaining the robustness expected from a purpose‑made caliper attachment. The combination of light weight and compact geometry supports efficient throughput without compromising stability. Clear compatibility and workshop integration Compatibility information is explicit: the part is intended for use with KNUX‑R calipers, ensuring straightforward integration into measurement setups that use that model. The accessory suits a range of small‑part measurement and handling tasks common in precision engineering, maintenance and quality control environments. Its straightforward role as a clamping accessory reduces the need for improvised fixtures, helping standardise routine checks and supporting traceable inspection routines across multiple workstations. Contact Metav Werkzeuge for availability and technical advice on the Teknik Makina clamping jaw BK028TM compatible with KNUX‑R calipers — direct supply from Emmerich and tailored product guidance available Technical information Article number: BK028TM Manufacturer: Teknik Makina Compatible with: KNUX‑R calipers Weight: 0.1 kg ECLASS: 21189290 Facts Weight: 0.1 kg ECLASS: 21189290 Special features Type: clamping jaw Compatible with: KNUX‑R calipers Manufacturer: Teknik Makina FAQ What is the BK028TM intended for? The BK028TM is a clamping jaw intended as an accessory for caliper measurement tasks, providing stable holding during inspection processes. Which caliper models are supported? Compatibility is specified for KNUX‑R calipers; the Teknik Makina clamping jaw BK028TM is designed to fit that model’s jaw geometry. How much does the accessory weigh? The clamping jaw BK028TM has a weight of approximately 0.1 kg, supporting comfortable handling and frequent tool changes. Is the component suitable for precision inspection in workshops? Yes, the accessory is intended to support repeatable measurement setups and small‑part handling typical of workshop and quality control environments. What is the SKU and who is the manufacturer? The SKU is BK028TM and the component is produced by Teknik Makina Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient clamping for reliable caliper measurement: the compact, lightweight design and direct compatibility with KNUX-L calipers provide stable positioning and improved repeatability. Order the clamp accessory directly via Metav Werkzeuge or request specialist advice from their consultants. Clamping Prong BK030TM — Caliper clamp accessory with KNUX-L compatibility, Teknik Makina The Clamping Prong BK030TM is a compact clamp accessory designed to secure workpieces or fixtures to a caliper for precise positioning during measuring operations. Clamping prong BK030TM by Teknik Makina Compatible with KNUX-L calipers Lightweight at 0.1 kg Compact design for tight measuring setups Precise clamping to reduce measurement variation The BK030TM functions as a purpose-built clamping element that improves repeatability by stabilising the contact point during a measurement task. Fitted to the caliper interface intended for the KNUX-L, the component offers a defined clamping action that minimises movement between the measuring jaws and the workpiece. For metrology routines where consistent datum points are essential, this accessory supports accurate, repeatable readings while integrating with existing caliper setups. Low profile, minimal interference in the workflow A compact and lightweight accessory, the clamp prong has been developed to avoid obstructing access to the measured surface. Its small mass (approx. 0.1 kg) reduces additional load on the instrument, which helps preserve the caliper’s balance and tactile feel. The simple mechanical interface allows swift assembly on the intended caliper type, keeping changeover times short and supporting efficient measuring sequences without extensive recalibration. Procurement and quality assurance through a trusted partner Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component benefits from an established supply chain and a practical approach to quality control. Metav’s presence in Emmerich functions as a practical quality filter for the European market; with a broad assortment of workshop-grade products and a proven customer base, procurement is straightforward and reliable. Buyers seeking consistent measurement performance will appreciate a compact clamping solution that is supported by a supplier experienced in precision tooling. For application advice or to secure BK030TM from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich for expert consultation and next-step planning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: BK030TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Weight: 0.1 kg Suitable for: KNUX-L calipers UID: BK030TM Special features Clamping accessory for calipers Compact design for tight measuring setups Compatible with KNUX-L FAQ What is the primary function of the clamping prong? The clamping prong secures a defined contact point on a caliper to improve stability and repeatability during measuring routines; the BK030TM is designed specifically for that role. Which calipers is this accessory compatible with? Compatibility is specified for KNUX-L calipers; the BK030TM is made to interface directly with that caliper series. Will the clamping prong affect caliper accuracy? When fitted correctly, the BK030TM helps to maintain consistent positioning and thus supports accurate, repeatable measurements rather than introducing error. Is the BK030TM suitable for tight measuring setups? Yes — the accessory is compact and lightweight (approx. 0.1 kg), making it well suited to confined measuring arrangements where space is limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the secure clamping for SCMT 1204 inserts and the rigid 150 mm shank to improve reproducibility and reduce setup time; the left‑hand orientation and M12 mounting thread ensure stable external turning operations. Order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder for SCMT 1204 indexable inserts (L150 mm, left‑hand) — Teknik Makina Clamping holder for SCMT 1204 indexable inserts designed for left‑hand external turning with a compact, rigid shank for industrial workshop use Secure clamping for SCMT 1204 inserts Left‑hand holder for external turning Robust 150 mm shank length M12 mounting thread for stable set‑up Reproducible clamping that shortens set‑up time A precisely machined toolholder body with an ISO 2525 designation provides consistent seating for SCMT 1204 indexable inserts, delivering repeatable positioning with each index change. The insert fastens with an M5x12 Torx screw using a T20 key, enabling quick, repeatable replacement and minimising downtime. By combining positive locating surfaces with a secure Torx clamp, the system reduces micro‑movement under load, which supports tighter tolerances and steadier cycle times. Compact shank geometry for improved rigidity and finish The compact shank (25 mm width × 25 mm height) and 150 mm overall length balance accessibility and stiffness. This geometry reduces lever arm effects compared with longer bars, enhancing rigidity during heavier cuts and improving surface finish. The cutting head width (32 mm) and cutting height 30 mm are matched to the insert geometry to maintain correct cutting engagement at a 45° approach angle, which helps with controlled chip formation and steady tool pressure for predictable machining results. Left‑hand orientation for dedicated turning applications Designed specifically for left‑hand turning applications, this holder positions the insert for external cuts where a left‑hand tool is required. The orientation simplifies tool planning in mixed operations and avoids improvisation at the machine, ensuring that feeds and clearances are correct from the outset. Using a purpose‑built left‑hand holder reduces the need for adjustments and contributes directly to process reliability on lathes configured for left‑hand tooling. Practical workshop features to keep production moving The holder’s practical details support everyday workshop efficiency: the ISO 2525 designation and compact format make it straightforward to identify and restock, while the M12 thread mounting ensures a secure connection to tool posts or adaptors. The relatively low mass (0.695 kg) makes handling easier during set‑up without compromising clamping stability. The product is supplied under SKU D471TM, enabling unambiguous ordering and inventory control. Secure machining precision with Teknik Makina toolholders — contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D471TM Brand: Teknik Makina Product type: Clamping holder for SCMT 1204 indexable inserts ISO designation: 2525 Facts Overall length: 150 mm Weight: 0.695 kg Shank width: 25 mm Shank height: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Thread: M12 Cutting angle: 45° Direction: left Special features Torx key: T20 Torx screw: M5x12 Compatible with SCMT 1204 inserts ISO 2525 designation FAQ Which inserts fit this holder? The holder is compatible with SCMT 1204 indexable inserts; the geometry and clamp arrangement are matched to this insert size for correct seat and cutting height. Is this holder suitable for right‑hand turning? No, this model is a left‑hand holder designed specifically for left‑hand external turning; right‑hand operations require the corresponding right‑hand toolholder. How is the insert secured in the tool? The insert is secured with an M5x12 Torx screw tightened with a T20 key, providing a reliable clamp and repeatable seating. What mounting interface is required on the toolpost? The holder uses an M12 mounting thread; ensure the turret or adapter accepts M12‑threaded holders and the 25 × 25 mm shank profile. What is the SKU and who supplies this product? The product is listed as SKU D471TM and is supplied under the Teknik Makina range for clamping holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust clamping solution that combines compact mass, clear compatibility and dependable manufacture; ideal for precise fixture tasks and straightforward integration into existing toolholding systems — order directly via Metav Werkzeuge or request consultation from the technical team. Spannpratze — Clamping jaw, compatible with DNMG 11, Teknik Makina Spannpratze is a compact clamping jaw engineered for secure fixture in machining set-ups and for integration with indexable-insert tooling systems. Compact weight 0.1 kg Compatible with DNMG 11 Teknik Makina manufacturing quality Secure clamping for consistent machining results The Spannpratze provides a secure fixture that contributes to repeatable machining outcomes. Its design focuses on maintaining stable contact between tool and holder, which supports precision in turning and finishing operations. By ensuring consistent clamping behaviour, the component helps to reduce variability in part quality and supports predictable tool performance across repeated cycles. Straightforward compatibility with DNMG 11 systems Compatibility with DNMG 11 means the clamping jaw mates with common indexable-insert assemblies used in many turning applications. DNMG designations indicate standardised insert geometry; matching the fixture to that geometry simplifies setup and minimises the need for custom adaptors. Clear compatibility reduces integration time and helps to avoid setup errors when exchanging inserts or adapting toolholders in the workshop. Lightweight handling without compromise on durability With a mass of 0.1 kg, the clamping component is easy to handle during tool changes and inspection, while remaining sufficiently robust for routine production use. The low weight assists in rapid tool swaps and lowers handling fatigue, yet the construction supports the mechanical demands of clamping. This balance between lightweight handling and reliable performance is suited to both single-station shops and higher-throughput workbenches. Simple checks and practical integration advice For reliable fitment, verify the clamping interfaces and ensure the index dimensions correspond to the insert and holder family in use. When in doubt, consult available technical datasheets or request the measured dimensions from the dealer before installation. Metav’s role as a precision partner provides an additional quality filter for European supply chains, supporting consistent availability and clear documentation for integration into existing tooling setups. For procurement or technical clarification on this Teknik Makina clamping jaw (SKU BK024TM), contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — Metav’s consultants are available to assist with specification checks and order handling. Technical Data Article number: BK024TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg ECLASS: 21189290 Special features Product name: Spannpratze Suitable for: DNMG 11 FAQ What is the primary function of this clamping component? This clamping jaw is intended to provide a secure fixture for indexable-insert toolholders; the Spannpratze secures the assembly to maintain consistent machining geometry. Is the component compatible with DNMG 11 inserts? Yes — the clamping jaw is specified as compatible with DNMG 11, making it suitable for toolholders that use that insert form. What is the mass of the unit and how does that affect handling? The unit weighs 0.1 kg; this low mass facilitates rapid handling and tool changes while supporting stable clamping in standard workshop operations. Which SKU should be referenced when ordering or requesting datasheets? Reference SKU BK024TM for order placement and when requesting technical documentation for the Spannpratze. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, reliable clamping solution that combines secure fixation for DNMG 11 indexable inserts with a lightweight design for fast handling and tool changes. Order the clamping wedge directly via Metav Werkzeuge or contact the consultants for compatibility advice. Clamping wedge BK017TM – compact clamp for DNMG 11 indexable inserts by Teknik Makina Clamping wedge BK017TM is a compact clamping component intended for secure fixation of DNMG 11 indexable inserts in general turning applications, designed to integrate into standard insert-holding systems. Secure hold for DNMG 11 inserts Compact, lightweight design at 0.1 kg Precision clamping for indexable inserts Compatible with common insert holders Improved process stability through precise clamping A consistent clamping interface is fundamental for repeatable turning operations. The BK017TM clamping wedge provides secure fixation for DNMG 11 indexable inserts, reducing micro-movements that can cause chatter and poor surface finish. By ensuring a stable contact between insert and holder, the component supports precision in part geometry and contributes to reproducible machining results across multiple cycles. The design focuses on maintaining firm seat pressure while allowing straightforward insert seating and replacement. Fewer interruptions and predictable tool behaviour Stable clamping reduces the risk of unexpected insert displacement and helps to maintain cutting-edge positioning, which in turn minimises corrective rework and unscheduled stoppages. The component’s compatibility with DNMG 11 inserts and its emphasis on long service life support longer uninterrupted runs and predictable maintenance intervals. In production environments where repeatability and uptime matter, this clamping solution contributes to consistent cycle times and better overall process reliability. Easy handling and integration at the bench Weighing approximately 0.1 kg, the clamping wedge is deliberately compact for quick handling during setup and changeover procedures. The lightweight construction simplifies manual replacement and reduces handling fatigue during repetitive tool changes. Assembly into existing insert-holding setups is straightforward when DNMG 11 inserts are specified; for bespoke toolholder configurations, a short compatibility check is recommended. The component bears the manufacturing pedigree of Teknik Makina and is intended to complement standard turning tool assemblies. For technical advice or to secure the Teknik Makina clamping wedge BK017TM from stock, contact Metav Werkzeuge for order support and compatibility consultation Technical data Article number: BK017TM Manufacturer: Teknik Makina eClass: 21189290 Suitable for: DNMG 11 indexable inserts Facts Weight (kg): 0.1 SKU: BK017TM Special features Description: Clamping wedge for indexable inserts Marketing notes: good chip machining; long service life Application: turning / insert clamping FAQ Is this clamping wedge compatible with DNMG 11 inserts? The clamping wedge BK017TM is designed for use with DNMG 11 indexable inserts and secures the insert in a standard seat for turning operations. Which toolholders can accept the BK017TM clamping wedge? Compatibility depends on the holder geometry; the BK017TM is intended for common insert-holding systems that accept DNMG 11 inserts—specific holder checks are advised before retrofit. How often should the clamping wedge be inspected or replaced? Routine visual inspection for wear and secure seating is recommended; the BK017TM supports long service life, but replacement intervals depend on operating conditions and machining parameters. Who manufactures the BK017TM and where can it be ordered? The component is supplied by Teknik Makina (Teknik Cutting Tools) and can be ordered through Metav Werkzeuge; SKU BK017TM is referenced for procurement Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise, reliable clamping that fits standard CNMG 19 inserts and keeps downtime low; the lightweight construction and simple retrofit ensure smooth integration into existing toolholders. Order direct via Metav Werkzeuge or contact the team for application advice. Clamping Jaw BK025TM — Compact clamping accessory compatible with CNMG 19 by Teknik Makina The Clamping Jaw BK025TM is a compact clamping accessory intended for secure fixation of CNMG 19 indexable inserts in turning operations, designed to integrate with standard toolholder systems and support efficient workshop workflows. Secure clamping for CNMG 19 inserts Compact and lightweight: 0.1 kg Replacement part for toolholders Suitable for industrial turning use Reliable fixation to reduce tool change delays The BK025TM delivers secure clamping for CNMG 19 indexable inserts, which helps to reduce unplanned stoppages caused by insert slippage. In practice this means fewer interruptions during turning operations and a predictable process rhythm. The term CNMG 19 denotes a common insert format in metalcutting; using a dedicated clamping component for that format ensures consistent seating and repeatable contact pressure, translating into steady surface finishes and lower tool-related scrap rates. Lightweight design for faster handling and retrofits Weighing just 0.1 kg, this clamping component is notably lightweight, simplifying manual handling during maintenance and fast retrofit into existing toolholders. The reduced mass contributes to easier tool changes without requiring additional balancing measures, so workshop technicians can perform replacements more quickly. For small-batch production or frequent insert swaps, this compact form factor supports operational efficiency while keeping toolpost loadings minimal. Straightforward integration into standard toolholder ecosystems As a purpose-built clamping accessory, the item is intended for direct integration with conventional turning setups and indexable-insert systems, enabling straightforward replacement of worn clamping parts. Specification-aligned components like this one help to standardise spare-part inventories and shorten procurement cycles. The compact construction also assists stock management, since a single SKU can serve multiple toolholder types that accept CNMG 19 inserts. For tailored advice on integrating the Teknik Makina clamping jaw into a specific toolholding system or to secure supply via Metav Werkzeuge, contact our consultants at Metav Werkzeuge for straightforward, expert assistance. Technical Data Article number: BK025TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Weight: 0.1 kg UID: BK025TM Special features Compatible with CNMG 19 inserts Clamping accessory for toolholders FAQ What insert types does this clamping component support? The BK025TM is designed for CNMG 19 indexable inserts and provides the clamping form factor required for secure seating of that insert family. Can the clamping jaw be used as a direct replacement in existing holders? In many standard toolholder systems that accept CNMG 19 inserts, the BK025TM serves as a straightforward replacement part; compatibility should be confirmed with holder geometry. Is the BK025TM suitable for frequent insert changes in small-batch production? Yes, the lightweight construction and simple retrofit properties of the BK025TM make it well suited to operations with regular insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure clamping and lightweight handling to reduce tool-change time and keep turning operations running smoothly; combine reliable retention for WNMG 08 inserts with simple compatibility checks—order this accessory directly via Metav Werkzeuge or ask our consultants for tailored advice. Clamping Wedge (Spannpratze) – for WNMG 08 inserts, Teknik Makina The clamping wedge (Spannpratze) is a compact clamping accessory designed to retain WNMG 08 turning inserts securely in indexable toolholders for lathe and turning operations. Secure retention for WNMG 08 inserts Lightweight at just 0.1 kg Compatible with Teknik Makina toolholders Reduced downtime through secure insert retention The clamping wedge offers a straightforward solution for retaining WNMG 08 turning inserts, helping to prevent micro-movements that can cause chatter or premature insert wear. By ensuring a stable seating of the indexable cutting part, the accessory contributes to consistent surface finish and repeatable tool position, which in turn supports reliable cycle times and fewer unexpected stoppages. The design focuses on effective retention rather than complex assembly, so toolroom throughput is improved without additional setup overhead. Faster tool changes and easier workshop handling Thanks to its lightweight (0.1 kg) construction and compact form, the clamp accessory simplifies manual handling during tool changes. Operators benefit from quicker replacement routines and reduced physical strain when fitting or removing clamping elements on the toolpost. The simplified handling translates into shorter non-productive time between operations and a more efficient workflow on the shop floor, while the clear fit to WNMG 08 inserts makes selection and matching straightforward. Integration into existing turning systems and proven reliability As an accessory from Teknik Makina intended for turning applications, the clamping wedge integrates into established toolholding setups without demanding alterations. The product supports standard indexable insert geometry (WNMG 08), making it suitable for a range of common turning tasks in metalworking workshops. By focusing on a concise function—secure clamping—the component complements maintenance routines and tool inventories, helping to maintain machining quality over extended runs. Contact Metav Werkzeuge today to confirm fitment for existing toolholders and to discuss the Teknik Makina clamping wedge (SKU BK026TM) for reliable retention of WNMG 08 inserts. Technical Data Article number: BK026TM Manufacturer: Teknik Makina eClass: 21189290 Weight: 0.1 kg Suitable for: WNMG 08 Facts Weight (kg): 0.1 eClass code: 21189290 Special features Compatibility with WNMG 08 turning inserts Accessory for insert clamping in turning toolholders Manufacturer: Teknik Makina FAQ Is this clamping wedge suitable for WNMG 08 inserts? Yes. The clamping wedge is designed specifically for use with WNMG 08 turning inserts and secures the indexable part in compatible toolholders. Can the accessory be used with other insert types? The product is intended for WNMG 08 geometry; for different insert formats a suitability check is recommended before use. How does the lightweight design benefit workshop routines? At 0.1 kg, the accessory eases handling during tool changes, supporting quicker replacement cycles and reduced operator effort. Where can compatibility with a specific toolholder be verified? Compatibility confirmation can be arranged through Metav Werkzeuge; reference BK026TM when enquiring to ensure precise advice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, easily identifiable replacement that matches TPKN 16 calipers, combines practical handling with straightforward procurement and keeps workshop downtime to a minimum — order directly via Metav Werkzeuge or consult the team for matching components. Spannpratze BK036TM — Clamping prong compatible with TPKN 16 (Teknik Makina) The Spannpratze BK036TM is a compact clamping prong intended for integration with TPKN 16 calipers, suitable for workshop maintenance and component replacement tasks. Lightweight: 0.1 kg Compatible with TPKN 16 calipers SKU BK036TM for quick identification Fast integration with existing calipers for minimal downtime The clamping prong is specified for direct use with TPKN 16 calipers, enabling rapid replacement without lengthy modification. As a purpose-made component, the part reduces calibration interruptions and simplifies stock management by using a clear reference: SKU BK036TM. For procurement planning, the defined fitment eliminates guesswork and supports predictable maintenance scheduling; the tangible outcome is fewer production delays and a more efficient tool-change workflow. Compact mass for stable handling in precision tasks With a measured mass of 0.1 kg, this clamping component presents a lightweight option that is easy to position and less likely to shift system balance during handling. The reduced inertia helps in delicate procedures where small movements matter; the low mass also eases storage and transport within busy workshop environments. Specified dimensions and a clear compatibility statement assist technicians in selecting a spare that aligns with the existing measurement setup, preserving measurement consistency. Traceable sourcing and workshop-friendly logistics Traceability is supported through the SKU BK036TM and the manufacturer attribution to Teknik Makina, making reordering straightforward and error-resistant. The ECLASS reference further aids cataloguing and ERP integration for procurement teams. Relying on a clearly identified spare part supports inventory control and ensures that maintenance managers can replace components with minimal consultation, keeping operations predictable and efficient. For Teknik Makina spare parts and precise replacement advice, contact Metav Werkzeuge with SKU BK036TM for rapid assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BK036TM Manufacturer: Teknik Cutting Tools Suitable for: TPKN 16 calipers Facts Weight: 0.1 kg ECLASS: 21189290 Special features Application: clamping component SKU for reference: BK036TM Brand: Teknik Makina FAQ Which calipers is this clamping prong compatible with? The Spannpratze BK036TM is specified for compatibility with TPKN 16 calipers and is intended as a direct-fit clamping component for that series. What is the weight of the component? The clamping prong BK036TM has a listed weight of 0.1 kg, reflecting a lightweight design for easy handling. Who manufactures this clamping prong? The part is supplied by Teknik Makina (Teknik Cutting Tools) and is sold under the SKU BK036TM for unambiguous identification. How can the part be identified in ordering systems? Reference SKU BK036TM and the ECLASS code 21189290 when cataloguing or searching in procurement systems to ensure the correct clamping prong is selected. Is the Spannpratze intended as a replacement part? Yes, the Spannpratze BK036TM is designed as a replacement clamping component for workshops using TPKN 16 calipers, aiding rapid maintenance cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com