Gibt es einen Hahn und Kolb Online Shop?

Benefit from the combination of solid carbide durability, internal coolant for improved chip evacuation and the practical left‑hand cutting orientation for specialised setups — these features ensure reliable performance and consistent hole quality in CNC turning operations; order the tool directly via Metav Werkzeuge or contact our consultants for tailored advice. E12M SDUCL 07 drill bar (SDUC with internal coolant) by Teknik Makina The E12M SDUCL 07 is a solid‑carbide drill bar designed for left‑hand cutting with an internal coolant channel, intended for CNC turning applications using indexable inserts Solid carbide construction Internal coolant supply Compatible with DCMT 0702 inserts Left‑hand cutting orientation Durable material for repeatable results Constructed from solid carbide, this drill bar delivers exceptional stiffness and wear resistance, which translates into consistent hole quality and extended tool life in high‑volume machining. The monolithic design reduces vibration compared to multi‑component holders and helps maintain positional accuracy during deep cuts. For operations where dimensional stability is critical, the robust material choice minimises rework and supports predictable cycle times. The result is fewer tool changes and a steadier production flow with measurable efficiency gains. Coolant‑through design to maintain cycle efficiency The integrated internal coolant channel directs coolant precisely to the cutting zone, improving lubrication and chip control while reducing thermal distortion. By flushing chips away from the insert and flank edges, the coolant‑through arrangement helps preserve insert geometry and lowers the risk of built‑up edge formation. For practical purposes, this means longer insert life and fewer unscheduled stops for cleaning; the feature is particularly beneficial when machining materials that generate long, stringy chips or when higher cutting parameters are required to meet productivity targets. Practical compatibility and fit for CNC turning Engineered for indexable insert turning, the tool accepts DCMT 0702 inserts and features a 12 mm shank for compact toolholder mounting. The left‑hand cutting orientation suits specialised turning setups where reverse rotation or specific toolpaths are required. With a 16 mm diameter and 150 mm overall length, the bar balances rigidity and reach for common turning and drilling tasks. The compact form factor, combined with standard insert interface and Torx fastenings, simplifies maintenance and insert replacement, supporting a smooth workflow at the machine. Contact Metav Werkzeuge today for a consultation on how Teknik Cutting Tools' E12M SDUCL 07 drill bar can be integrated into existing turning operations and to secure reliable supply from Emmerich Technical Data Article number: KE41TM Manufacturer: Teknik Makina ISO designation: E12M SDUCL 07 Name: Bohrstange / SDUC with Coolant Facts Diameter: 16 mm Overall length: 150 mm Shank diameter: 12 mm Cutting height: 9 mm Weight: 0.1 kg Special features Material: Solid carbide Internal coolant: Yes Compatible inserts: DCMT 0702 Cutting direction: Left‑hand Torx key: T8 Torx screw: M2,5x5,5 FAQ What insert type does this drill bar use? The drill bar is specified for use with DCMT 0702 indexable inserts and is optimised to secure and support that insert geometry for turning and drilling tasks. Is the coolant channel suitable for high‑pressure supply? The tool features an internal coolant channel designed to direct fluid to the cutting zone; coolant pressure compatibility should be checked against machine specifications before high‑pressure use. Can this tool be mounted in standard toolholders? The 12 mm shank dimension allows mounting in compact toolholders designed for 12 mm shanks; confirm clamping specifications of the toolholder to ensure proper fit. Which materials is the bar best suited for? With its solid carbide construction and coolant‑through capability, the bar is well suited to a range of metals where chip control and thermal stability are required, improving insert life and surface finish. Does the left‑hand cutting orientation affect insert selection? Left‑hand cutting requires inserts and seatings intended for reverse cutting directions; the bar is supplied for left‑hand turning and should be paired with inserts and holders specified for that orientation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, versatile boring solution that combines an internal coolant option with a left‑hand cutting configuration to improve chip control and extend insert life; the three‑bar set provides coverage across the 12–20 mm range for flexible workshop use. Order or request configuration advice via Metav Werkzeuge for a tailored supply and reliable delivery. Boring bar set IPS05TM by Teknik Makina — internal‑coolant option, left‑hand cutting A Boring bar set IPS05TM designed for indexable‑insert machining in production and workshop environments, available with or without internal coolant. Internal coolant option for better chip evacuation Left‑hand cutting direction for specialised operations Compatible with DC--0702 indexable inserts Includes three bar models covering 12–20 mm Faster cycles and longer tool life through coolant management The combination of an internal coolant option and proven bar geometry reduces temperature at the cutting edge, which in turn lowers tool wear and enhances process stability. For industrial operations where cycle time and repeatability matter, this configuration is a direct route to improved efficiency: coolant channels improve chip evacuation and heat dissipation, helping to maintain cutting conditions over longer runs. The design is suited to serial boring and finishing passes where consistent surface quality and predictable insert life are required. Designed for indexable inserts and straightforward handling Compatibility with DC--0702 indexable inserts ensures a wide availability of cutting grades and chipbreakers for different workpiece materials. The system uses standard fastening hardware (Torx key T8, screw M2.5×5.5) for secure clamping and quick exchange of inserts. This means minimal downtime during insert changes and clear advantages in tool maintenance routines. The left‑hand orientation enables specific machine setups and is beneficial where machining strategy requires counter‑directional forces. What the set contains and typical applications The kit contains A10J SDUCL 07, A12K SDUCL 07 and A16M SDUCL 07, providing a practical spread of bar lengths and overhangs for internal machining tasks. The set covers a diameter range of 12–20 mm and is supplied as a compact, balanced offering for workshops that demand flexibility without excess inventory. Typical applications include light to medium boring operations in steels and general engineering materials where indexable insert solutions are preferred for cost‑effective finishing and roughing. Practical installation, maintenance and workshop integration Assembly and maintenance follow standard practice for indexable‑insert tooling: verify insert seating, tighten screws with the supplied Torx key to the appropriate torque, and inspect coolant passages before first use. Periodic checks maintain performance and reduce the risk of runout or loosening. For workshops integrating new tooling concepts, the set’s straightforward compatibility with DC--0702 inserts simplifies tool crib standardisation and reduces training time for machine operators. For a reliable tooling configuration and supply via Metav Werkzeuge, request assistance to confirm whether the Teknik Cutting Tools IPS05TM set with internal coolant suits the intended machines and inserts. Technical data Article number: IPS05TM Manufacturer: Teknik Makina Content: A10J SDUCL 07, A12K SDUCL 07, A16M SDUCL 07 Weight: 0.45 kg Internal coolant: yes Cutting direction: left Compatible inserts: DC-- 0702 Torx key: T8 Torx screw: M2.5x5.5 Set: yes Core data Weight: 0.45 kg Pieces per set: 3 Diameter range: 12–20 mm Torx key size: T8 Torx screw size: M2.5x5.5 ECLASS: 21189217 Special features Internal coolant option Left‑hand cutting configuration Compatible with DC--0702 indexable inserts Includes three bar models for varied coverage Compact set for workshop flexibility FAQ Which inserts fit this boring bar set? The set is compatible with DC--0702 indexable inserts; the bars accept standard DC--0702 geometry for a wide range of grades and chipbreakers. Does the set include coolant capability? Yes, the IPS05TM series is supplied with the option for internal coolant, enabling direct flushing at the cutting edge for improved chip control. What is contained in the set? The kit contains A10J SDUCL 07, A12K SDUCL 07 and A16M SDUCL 07, offering a practical spread of bars that cover the 12–20 mm range. Is the cutting direction left‑handed and why does that matter? The bars are specified for left‑hand cutting, which is important for machine setups and cutting strategies that require counter‑directional tool rotation or particular chip flow characteristics. What fastening hardware is required for inserts? Insert clamping uses a Torx T8 key and screws sized M2.5×5.5, which are compatible with standard workshop accessory kits and simplify insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of solid carbide rigidity, internal coolant delivery, and precise ISO mounting for reliable bore finishing and reduced vibration. Order this Teknik Makina tool directly via Metav Werkzeuge or consult our specialists for application advice and fast supply. Boring bar SCLC with Coolant — Solid carbide boring bar with internal coolant, left-hand cutting by Teknik Makina The Boring bar SCLC with Coolant is a left-hand indexable boring bar designed for precision internal turning and bore finishing in CNC turning centres and lathes Solid carbide construction for rigidity Internal coolant for improved chip evacuation Compatible with CC--0602 indexable inserts Left-hand cutting for specific turning orientations Stable machining through a rigid, all-carbide build The solid carbide body provides high torsional stiffness and damping for consistent bore geometry and improved surface finish. With a 16 mm diameter and 150 mm overall length, the bar balances reach with stability to reduce chatter in demanding operations. The ISO designation E12M SCLCL 06 denotes a standardised mounting form that facilitates repeatable set-up and interchangeability on modern toolholders. This construction helps maintain concentricity and contributes to predictable tool life under normal machining parameters. Controlled cooling and chip flow for longer tool life Integrated internal coolant channels direct cutting fluid to the cutting edge, supporting efficient cooling and chip evacuation where it matters most. Combined with compatibility for CC--0602 indexable inserts and a cutting height 7 mm, the design improves temperature control at the cutting zone and reduces built-up edge formation. Better coolant delivery and effective chip control translate into longer insert life and fewer interruptions for clearing chips, resulting in higher process uptime and more consistent bore finishes. Quick setup and maintenance to reduce downtime The bar’s 12 mm shank diameter and the use of a standard Torx T8 key with M2.5x5.5 torque screw allow straightforward installation and secure clamping of indexable inserts. Lightweight at 0.2 kg, the tool is easy to handle during setup while remaining dimensionally stable in the holder. Left-hand cutting orientation is suitable for specific turning strategies and toolpath directions. The straightforward fixings and standard ISO form factor speed changeover and help to keep set-up times low in serial and batch production. Discuss Teknik Makina’s SCLC boring bar with Metav Werkzeuge for tailored supply and rapid delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KE19TM Manufacturer: Teknik Makina ISO designation: E12M SCLCL 06 SKU: KE19TM Core dimensions Diameter: 16 mm Overall length: 150 mm Shank diameter: 12 mm Cutting height: 7 mm Weight: 0.2 kg Features & materials Solid carbide Internal coolant Left-hand cutting Compatible with CC--0602 inserts Torx screw M2.5x5.5, Torx key T8 For indexable insert boring FAQ What inserts fit this boring bar? The Teknik Makina boring bar SCLC with Coolant accepts CC--0602 indexable inserts; insert selection should match the required radius and cutting data for the material being machined. Is the coolant fed through the tool? Yes — the bar features internal coolant channels that deliver fluid directly to the cutting edge to improve cooling and chip evacuation. What is the mounting standard for the bar? The bar uses the ISO designation E12M SCLCL 06, which defines the mounting geometry for secure and repeatable installation in compatible toolholders. Which cutting direction is this tool designed for? This tool is specified for left-hand cutting, suitable for operations where the tool advances in a left-handed orientation relative to the workpiece rotation. What are the key assembly components required? Assembly requires the supplied Torx screw specification M2.5x5.5 and a T8 Torx key for insert clamping; the bar’s 12 mm shank aligns with matching collets or holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid solid‑carbide design combined with internal coolant to maintain stable cutting conditions and extend tool life; the compact 12 mm shank and 150 mm overall length allow flexible integration into existing toolholders. Order directly via Metav Werkzeuge or consult our team for application advice. SDQC Boring Bar with Coolant (E12M SDQCL 07) — Teknik Makina — 16 mm diameter, 150 mm overall length The SDQC Boring Bar with Coolant is a left‑hand, solid‑carbide boring bar with integrated internal coolant, engineered for secure use with indexable inserts in precision turning and finishing tasks Internal coolant for optimised cooling Solid‑carbide construction for high rigidity Compatible with DCMT 0702 inserts 12 mm shank, compact 150 mm overall length Precision and rigidity for stable bore finishing Built from solid carbide, this boring bar provides high rigidity and minimal deflection, which matters when maintaining tight tolerances in turning operations. The 16 mm tool diameter combined with a 150 mm overall length reduces vibration and improves surface finish compared with longer or less rigid holders. A 9 mm cutting height ensures secure seating of indexable inserts and consistent contact geometry, helping to achieve repeatable results in serial production or one‑off precision work. Optimised cooling and secure clamping for longer tool life The integrated internal coolant delivers fluid directly to the cutting zone, reducing heat build‑up and aiding chip evacuation; this extends insert life and improves surface quality in demanding cycles. The bar is designed for DCMT 0702 indexable inserts and uses a reliable clamping screw (M2.5x5.5) secured with a T8 Torx key for quick, repeatable insert changes. Left‑hand cutting orientation suits specific lathe setups and machining strategies, enabling predictable chip flow and process stability. Practical integration and production benefits With a 12 mm shank diameter and the ISO designation E12M SDQCL 07, the tool is straightforward to catalogue and fit into common holders, aiding machine uptime and inventory control. Weighing only 0.1 kg, it is easy to handle during setup while remaining robust in operation. The combination of targeted coolant delivery and a solid‑carbide body reduces the need for frequent intervention, supporting a more efficient machining process and fewer unscheduled stops on the shop floor. Contact Metav Werkzeuge today for tailored application advice and reliable supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KE61TM Brand: Teknik Makina ISO designation: E12M SDQCL 07 Material: Solid carbide Dimensions & measurable data Diameter: 16 mm Overall length: 150 mm Shank diameter (d): 12 mm Cutting height: 9 mm Weight: 0.1 kg Features & compatibility Compatible inserts: DCMT 0702 Internal coolant: Yes Cutting direction: Left‑hand Torx key size: T8 Clamping screw: M2.5x5.5 SKU: KE61TM FAQ Which inserts fit this boring bar? The SDQC boring bar accepts DCMT 0702 indexable inserts; the geometry and 9 mm cutting height are matched to that insert size for secure seating and consistent cutting performance. Is the coolant supplied through the bar or externally? Coolant is supplied through the bar via its internal coolant channel, directing fluid to the cutting zone to reduce temperature and improve chip control. Can the bar be used in a standard holder with a 12 mm shank? Yes, the bar features a 12 mm shank diameter and the ISO designation E12M SDQCL 07, making it compatible with holders that accept a 12 mm shank. What is the cutting direction and why does it matter? This tool is left‑hand cutting; that orientation must match the lathe programme and fixturing to ensure correct chip flow and secure engagement. How are inserts secured and which tool is required for changes? Inserts are secured with an M2.5x5.5 clamping screw tightened using a T8 Torx key for repeatable, secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid, ISO‑compliant holder that combines precise clamping with internal coolant delivery to improve insert life and surface finish; order the A16M SCLCL boring bar directly via Metav Werkzeuge or consult the technical team for application advice. A16M SCLCL boring bar – left‑hand holder with internal coolant by Teknik Makina, compatible with CC-- 09T3 inserts A16M SCLCL is a left‑hand indexable insert holder designed for reliable turning operations with internal coolant and a 95° cutting geometry Internal coolant supply 95° cutting angle for secure cutting Compatible with CC-- 09T3 inserts 16 mm shank, 150 mm overall length Precision and compatibility for dependable turning results The A16M SCLCL boring bar is engineered as an ISO‑style insert holder for CC-- 09T3 indexable inserts, offering a standardised interface that simplifies tool selection and repeatable set‑up in production environments. The left‑hand cutting orientation and the 95° cutting angle promote stable engagement at the insert nose, which translates into consistent surface finish and predictable tool life. For procurement planning, the holder’s ISO designation ensures compatibility with common tool posts and turret systems used in turning centres. Improved cooling and chip control for longer insert life Built‑in internal coolant directs lubricant and coolant directly to the cutting zone, aiding heat dissipation and chip formation; this reduces thermal loading on the insert and improves dimensional stability during extended cuts. The combination of targeted coolant flow and the holder’s geometry supports efficient chip evacuation, which lowers the frequency of insert changes and contributes to reduced machine downtime. These technical advantages deliver measurable workflow benefits in repetitive turning tasks where thermal control and chip management are critical. Rigidity and handling that support workshop productivity A 16 mm shank diameter combined with a 150 mm overall length provides a balance of rigidity and reach for medium‑duty turning and finishing operations. The modest mass (approx. 0.227 kg) and compact dimensions improve accessibility in tight setups while maintaining secure clamping via the 09 designated clamping system. The tool’s construction focuses on mechanical stability to minimise vibration and run‑out, resulting in improved repeatability across batches. For integration into existing tool inventories, the clear dimensional data and ISO coding facilitate straightforward tool management and replacement. Contact Metav Werkzeuge for application matching, detailed drawings or to arrange a tailored supply of Teknik Makina A16M SCLCL holders through their Emmerich service team Technical Data Article number: KA239TM Manufacturer: Teknik Makina ISO designation: A16M SCLCL Compatible inserts: CC-- 09T3 Facts Shank diameter: 16 mm Overall length: 150 mm Diameter: 20 mm Cutting edge height: 30 mm Weight: 0.227 kg Cutting angle: 95° Special features Internal coolant Left‑hand cutting direction Compatible with CC-- 09T3 indexable inserts Clamping designation: 09 FAQ What insert type fits this holder? The A16M SCLCL holder is specified for CC-- 09T3 indexable inserts and accepts standard inserts of that form factor for turning applications. Is the coolant internal or external on this tool? This Teknik Makina holder features internal coolant, delivering fluid directly to the cutting zone to support temperature control and chip evacuation. What are the key mounting dimensions for machine setup? Key dimensions: 16 mm shank diameter, 150 mm overall length, 20 mm body diameter; these values allow planning for rigidity and clearance in turret or tool post mounting. Can this holder be used for finishing cuts? Yes; the 95° cutting geometry and targeted coolant supply make the holder suitable for finishing or light to medium turning where surface quality and thermal stability are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a hard-wearing, production-ready solution that combines solid carbide construction with an internal coolant channel for extended tool life and improved surface finish; the three-piece set covering 10–16 mm diameters ensures quick diameter changes and consistent performance. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. IPS30TM Boring Bar Set – SCLC with Coolant, Solid Carbide (10–16 mm) by Teknik Makina A IPS30TM boring bar set engineered for right-hand external turning with through-coolant capability, compatible with CC-- 0602 indexable inserts and suited to CNC turning and precision workshops Solid carbide construction Internal coolant supply Set covers Ø 10–16 mm Compatible with CC-- 0602 inserts Right-hand cutting direction Consistent bore quality through rigid, carbide construction The set is manufactured from solid carbide, delivering high stiffness and thermal stability that reduce vibration and minimise bore deviation in serial production. Carbide's intrinsic hardness keeps cutting edges geometric for longer, which translates into fewer re-grinds and steadier tolerances on turned components. For machinists and production engineers, this means a reliable tooling solution that maintains bore concentricity and repeatable diameters across batches, improving first-pass yield and process stability. Coolant-through design improves tool life and surface finish An integrated internal coolant channel directs cutting fluid precisely to the insert cutting zone, lowering edge temperatures and supporting efficient chip breakage. Reduced thermal load diminishes flank wear and crater formation, extending insert life and preserving surface quality. When paired with compatible CC-- 0602 inserts, the coolant-through feature helps maintain consistent cutting conditions under elevated cutting speeds typical of modern turning centres, enabling longer uninterrupted cycles and fewer tool changes per shift. Practical set coverage and workshop-ready accessories The three-piece set covers the common diameter range 10–16 mm, providing immediate flexibility for small- to medium-diameter boring tasks. The kit is supplied with the required fixing hardware specification — Torx key T8 and Torx screw M2.5x5.5 — for secure insert clamping and quick replacement. With a compact net weight of 0.53 kg, the set is easy to handle and store at the machine station. Right-hand cutting geometry suits standard lathe configurations and typical feed directions, simplifying integration into existing tooling arrays and reducing setup time. Compatibility and application guidance for process planners The design is optimised for turning centres and lathe operations where rigid tool support and internal coolant are priorities. The toolholders accept CC-- 0602 inserts, a widely used insert family allowing process planners to select grades and coatings tailored to specific materials and cutting conditions. The combination of a carbide bar body and coolant-through capability supports machining of steels and alloyed materials where thermal control and chip evacuation are critical. For precise insert selection and cutting data, please consult Metav Werkzeuge’s technical advisors to match insert grade, speeds and feeds to the workpiece material. For ordering, technical clarification or application advice on the Teknik Cutting Tools IPS30TM boring bar set, contact Metav Werkzeuge directly — Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com — Metav’s specialists will recommend the optimal insert grade and setup for the intended application. Technical data Article number: IPS30TM SKU: IPS30TM Manufacturer: Teknik Makina Data Set size: 10–16 mm Pieces per set: 3 Weight: 0.53 kg Special features Material: solid carbide Coolant-through: internal coolant Compatible inserts: CC-- 0602 Cutting direction: right-hand Torx key: T8 Torx screw: M2.5x5.5 FAQ Which insert type fits this boring bar set? The IPS30TM set accepts CC-- 0602 indexable inserts; match the insert grade to the workpiece material for optimal wear resistance and surface finish. Is the coolant supplied through the boring bar? Yes, the toolholders feature an internal coolant channel that delivers fluid directly to the cutting edge to aid cooling and chip control. For which diameters is the set suitable? The kit covers the 10–16 mm diameter range, provided as a three-piece set to allow quick adaptation across common small-bore sizes. Can this set be used on standard CNC lathes? The IPS30TM tooling is intended for conventional CNC turning applications with right-hand cutting orientation and is compatible with machines equipped for coolant-through tooling. What fastening hardware is included or required? Insert clamping uses a Torx screw of size M2.5x5.5, and a Torx key T8 is specified for secure insert retention. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of secure clamping, standardised compatibility and compact dimensions to maintain a steady turning process; order directly via Metav Werkzeuge or consult the advisors for machining guidance. DSSNR 2525 Clamping Holder – Right-hand turning holder for SNMG 1204 (Teknik Makina) The DSSNR 2525 clamping holder is a right-hand external turning toolholder engineered for use with SNMG 1204 indexable inserts, offering a compact 25 x 25 mm shank and a 45° cutting geometry for stable, repeatable cuts. Right-hand orientation for standard turning Compatible with SNMG 1204 inserts 25 x 25 mm square shank 45° positive cutting angle Stable clamping for consistent part quality The square 25 x 25 mm shank and the documented ISO designation: DSSNR 2525 provide a familiar, robust interface for most lathe tool posts. The holder’s secure clamping arrangement, combined with an M12 mounting thread, keeps the insert seat rigid during cuts, reducing chatter and improving dimensional repeatability. This mechanical stability translates directly into fewer reworks and a more predictable process, which is especially relevant for batch production and quality-sensitive components. Lower cutting forces and improved surface finish A 45° cutting angle directs cutting forces in a controlled manner, decreasing radial load on the toolholder and spindle. The relatively wide cutting head (32 mm) and cutting height 35 mm help to support the insert edge, resulting in a better surface finish and longer insert life under comparable cutting conditions. The right-hand configuration is optimised for conventional turning directions, helping to maintain tool geometry and minimise tool deflection during medium to heavy cuts. Quick insert changes and minimal downtime Designed for common ISO inserts, the holder accepts SNMG 1204 indexable plates, which are widely stocked and available in multiple grades. The standard clamping thread and straightforward screw interface mean insert replacement can be completed with basic tooling and in short time, reducing machine downtime. At approximately 0.576 kg and 150 mm overall length, the holder is light enough for easy handling while being substantial enough to dampen vibration during the cut. Practical applications and workshop compatibility This right-hand turning holder is suitable for external turning operations where a 45° geometry and SNMG inserts provide the required balance between roughing capability and finishing quality. The DSSNR 2525 form factor fits established toolpost systems and is appropriate for jobbing shops and production environments that prioritise predictable performance and straightforward maintenance. When insert grade and cutting data are matched to the workpiece material, the toolholder supports efficient machining with established process parameters. For workshop-ready turning performance from Teknik Makina, request supply and machining advice from Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D212TM Manufacturer: Teknik Makina Product: Clamping holder (DSSNR for SNMG indexable inserts) Core dimensions Shank height: 25 mm Shank width: 25 mm Cutting head width: 32 mm Cutting height: 35 mm Overall length: 150 mm Weight: 0.576 kg Cutting angle: 45° Orientation: right-hand Mounting thread: M12 Compatibility & features For SNMG 1204 inserts ISO designation: DSSNR 2525 Right-hand cutting direction Accepts standard SNMG indexable plates FAQ Is the holder suitable for left-hand turning operations? The DSSNR 2525 holder is specified as right-hand, so it is intended for conventional right-hand external turning; left-hand operations will require a left-hand equivalent. Which insert type fits this holder? This clamping holder is configured for SNMG 1204 indexable inserts and the standard insert form should be used to ensure correct seating and chip control. What are the key dimensions to check for machine compatibility? Check the 25 x 25 mm shank size, the overall length 150 mm, and the toolpost capacity; these determine whether the holder fits the existing mounting system. How is the insert secured in the holder? The holder uses a standard clamping interface with an M12 screw thread for the clamping element, allowing firm retention and quick replacement of the indexable plate. Can this holder be used for both roughing and finishing? Yes; with appropriate SNMG insert grades and cutting parameters, the holder supports both roughing and finishing tasks thanks to its 45° geometry and stable seat. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of solid carbide rigidity, internal coolant delivery, and compact overall length for steady, repeatable boring results; order supply and technical advice via Metav Werkzeuge for reliable European distribution. KE51TM Insert boring bar — SDQC with internal coolant, solid‑carbide The KE51TM SDQC with Coolant is a right‑hand, solid‑carbide insert boring bar designed for precision insert turning and boring operations using DCMT 0702 indexable inserts. Solid carbide design for rigidity Internal coolant delivery for better cooling Compatible with DCMT 0702 indexable inserts 12 mm shank, 16 mm cutting diameter Stable machining with a solid‑carbide body for repeatable results The compact, monolithic construction delivers higher stiffness compared with multi‑piece assemblies, reducing chatter during interrupted cuts and improving surface finish. With a 16 mm diameter and a 12 mm shank, the tool is engineered for confined setups where rigidity matters; the modest weight (0.1 kg) and 150 mm overall length allow quick tool changes and easier balancing on turrets. This stability translates into longer effective tool life for the cutting edges and lower scrap rates, which supports efficient production planning and consistent part quality. Consistent temperatures and chip control via internal coolant Integrated internal coolant channels feed cutting fluid directly to the tool tip, lowering cutting temperature and aiding chip evacuation. The immediate cooling effect helps preserve insert geometry and reduces thermal expansion in the tool holder, which in turn keeps tolerances stable across long runs. For shops that prioritise process reliability, this coolant delivery method reduces manual rework and contributes to predictable cycle times — a practical advantage for batch production and repeat orders. Fast insert changes and clear mechanical interfaces The holder accepts DCMT 0702 indexable inserts and uses a secure Torx fastening system (key T8, screw M2.5 x 5.5) for rapid, repeatable clamp force during index changes. The tool offers a cutting height of 9 mm, which aligns with common insert geometries and simplifies set‑up. Clear, standardised interfaces mean less downtime for insert replacement and fewer alignment checks between tool swaps, supporting leaner workshop routines and higher machine utilisation. Practical fit‑for‑purpose design for controlled environments Designed as an ISO‑identified component (E12M SDQCR 07) and configured for right‑hand cutting, this insert holder is suited to operations that require compact reach and direct coolant supply. The combination of a short overall length and internal cooling reduces the need for secondary chip‑management steps and helps maintain tool integrity in repeated cycles. As a consequence, set‑up times are reduced and maintenance intervals can be extended, contributing to a smoother production flow without adding complexity to existing tooling systems. Contact Metav Werkzeuge for availability and technical advice on the Teknik Makina KE51TM insert boring bar — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for supply from Emmerich and guidance on integration into existing tooling setups. Technical data SKU: KE51TM ISO designation: E12M SDQCR 07 Manufacturer: Teknik Cutting Tools / Teknik Makina Facts Diameter: 16 mm Shank diameter: 12 mm Overall length: 150 mm Cutting height: 9 mm Weight: 0.1 kg Special features Material: solid carbide Internal coolant: yes Compatible inserts: DCMT 0702 Cutting direction: right‑hand Torx key: T8 Torx screw: M2.5 x 5.5 FAQ Which inserts fit this insert holder? The Teknik Makina KE51TM insert boring bar is specified for DCMT 0702 indexable inserts. Does the tool provide coolant through the body? Yes — the holder features internal coolant channels to deliver fluid directly to the cutting zone. What is the shank diameter and overall length? Shank diameter is 12 mm and overall length is 150 mm, optimised for compact setups. What cutting direction is the holder designed for? This variant is configured for right‑hand cutting as indicated by its SDQC designation. Which fastening system secures the inserts? Inserts are clamped with a Torx screw; required tools are T8 for the key and M2.5 x 5.5 for the screw. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 90° cutting angle and a 20 mm shank for stable shoulder milling and reliable indexable-insert performance; the cutter is tailored for LOEX 0804 inserts and provides precise seat and repeatability. Order this milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft milling cutter S295TM — 90° indexable-insert body for LOEX 0804 (Teknik Cutting Tools) The Shaft milling cutter S295TM is a 90° shank milling body engineered for shoulder milling with LOEX 0804 indexable inserts, suitable for CNC and workshop operations where repeatable insert seating and quick index changes are required. 90° cutting angle for shoulder milling 20 mm shank diameter for stable clamping Compatible with LOEX 0804 indexable inserts Torx screw M2.5x7, T8 key required Precise shoulder milling with proven insert compatibility The body provides a true 90° cutting angle, designed to locate and support LOEX 0804 indexable inserts for accurate shoulder and face milling. This geometry ensures a consistent cutting plane and reduces the need for secondary finishing, so process times are shortened. The compatibility with SECO-type inserts permits flexible tooling strategies while keeping setups repeatable and predictable. Stable clamping and runout control for improved surface finish A 20 mm shank offers a robust interface with collets or holders, improving rigidity and reducing deflection under cutting forces. The increased stiffness contributes to better surface finish and extended insert life by limiting vibration and chatter. Where machines and holders are already set up for metric shank tooling, the cutter integrates without additional adapters, simplifying the tool changeover workflow. Fast index changes and straightforward maintenance Equipped for secure insert retention, the body uses a M2.5x7 Torx screw and requires a T8 key for tightening and removal, enabling quick insert replacement and minimal downtime. The design accommodates 3 cutting edges, which balances productivity and serviceability: inserts can be indexed or changed rapidly, reducing total tool change time and making preventative maintenance predictable. Ready for workshop integration and reliable supply With an overall length of 150 mm and a compact mass of 0.384 kg, the cutter is sized for standard tool magazines and automatic tool changers while remaining manageable for manual setups. Metav's supply network provides consistent availability from Emmerich, backed by technical advice and a broad range of complementary tooling, helping to reduce supplier complexity and secure timely replenishment for production environments. For expert advice on integrating the Teknik Cutting Tools shaft milling cutter into current toolsets and fast delivery from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised recommendations and availability. Technical data Article number: S295TM Manufacturer: Teknik Makina For inserts: LOEX 0804 Compatible with inserts by: SECO Torx screw: M2.5x7 Torx key size: T8 Core specifications Shank diameter: 20 mm Cutting length: 40 mm Overall length: 150 mm Diameter: 20 mm Cutting edges: 3 Weight: 0.384 kg Cutting angle: 90° Special features For LOEX 0804 indexable inserts Compatible with SECO LOEX insert series 90° shoulder milling geometry Torx screw M2.5x7 for insert clamping FAQ Which inserts fit this milling cutter? The cutter accepts LOEX 0804 indexable inserts; compatibility with SECO LOEX inserts is specified for the S295TM milling body. What shank diameter is required for clamping? Clamping requires a 20 mm shank holder or collet to ensure the recommended rigidity for the S295TM tool body. How many cutting edges are supported? The cutter is specified for 3 cutting edges, enabling efficient machining cycles and predictable indexing. Which screw and tool are needed for insert changes? Insert retention uses an M2.5x7 Torx screw and is tightened/removed using a T8 Torx key. What are the main dimensions to set up in the machine? Key dimensions are a 20 mm shank diameter, 40 mm cutting length and 150 mm overall length for fixture and magazine planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of stable clamping and straightforward insert replacement to keep production reliable and predictable; benefit from fast maintenance thanks to the Torx M4x7 clamping system and the broad availability of BDMT 1704 inserts via Kyocera or compatible suppliers — order directly through Metav Werkzeuge or request specialist advice. Shaft milling cutter S579TM — 25 mm shaft, for BDMT 1704 indexable inserts (Teknik Makina) The Shaft milling cutter S579TM is a precision cutter body designed for use with BDMT 1704 indexable inserts, intended for process-stable milling in production and workshop environments 25 mm shaft diameter for stable clamping Accepts BDMT 1704 indexable inserts (Kyocera) 50 mm effective cutting length Torx M4x7 clamping screw, T15 key required Consistent productivity through stable tool geometry The combination of a 25 mm shaft and a 150 mm overall length provides a predictable tool setup that reduces vibration and runout during milling. The 50 mm cutting length ensures a useful engagement zone for many through‑pass and pocketing operations, while the two cutting edges and 90° cutting angle give a straightforward cutting kinematic that is easy to match with available BDMT insert geometries. For production planning, this means fewer interruptions for tool change and a reproducible surface finish when paired with the correct insert grade. The body’s mass of 0.548 kg contributes to momentum damping without adding excessive tool‑holder load. Fast replacement and secure clamping for minimal downtime Maintenance and insert changes are simplified by the Torx M4x7 clamping screw and the requirement for a T15 key. This common Torx size is widely available across workshops, enabling rapid insert indexing or replacement. The cutter accepts BDMT 1704 style inserts — a format supplied by Kyocera and other manufacturers — allowing procurement flexibility and rapid stock replacement. The secure screw clamp design reduces the risk of insert movement under load, supporting stable cutting conditions and consistent geometry over longer production runs. Integration and typical use cases in workshop and serial production The S579TM is conceived as a modular element in indexable insert tooling systems where changeover speed and toolbody rigidity are priorities. Its compatibility with BDMT 1704 inserts makes it suitable for workflows that demand frequent insert indexing for tool life management. The simple geometry and robust clamping help integrators and shopfloor planners implement predictable cycle times and reduce scrap risk. Where tool inventories are centralised, the cutter body’s reliance on a common insert type and Torx fastening supports streamlined logistics and lower spare‑part complexity. For a reliable supply and tailored advice on integrating the S579TM into existing tool fleets, contact Metav Werkzeuge GmbH — info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s team in Emmerich will support specification and delivery. Technical data Article number: S579TM Manufacturer: Teknik Makina Shaft diameter: 25 mm Effective cutting length: 50 mm Overall length: 150 mm Weight: 0.548 kg Number of cutting edges: 2 Cutting angle: 90° Diameter: 25 mm Clamping screw: M4x7 Torx key size: T15 Special features For BDMT 1704 indexable inserts Compatible with Kyocera BDMT 1704 inserts Torx M4x7 clamping screw SKU: S579TM FAQ What insert type does this cutter accept? The cutter accepts BDMT 1704 indexable inserts; the body is designed around that insert form and index. Is the clamping screw a standard size? Yes, the clamping screw is M4x7 and the required Torx key size is T15, both commonly available. What shaft diameter is required in the toolholder? The toolbody has a 25 mm shaft diameter, so a matching 25 mm holder or collet interface is required for correct clamping. How many cutting edges does the toolbody provide? The cutter body is configured for two cutting edges, providing a balance between material removal and insert indexing. Can Kyocera inserts be used directly? Kyocera BDMT 1704 inserts are listed as compatible, enabling direct replacement with those inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-rigidity cutter that combines a 16 mm shank with internal coolant for improved cycle stability and tool life; order the end mill directly via Metav Werkzeuge or ask our consultants if needed. 16 mm End Mill for BLMP 0603 Indexable Inserts – 150 mm Overall Length by Teknik Makina The 16 mm end mill for BLMP 0603 Indexable Inserts is a shank-mounted milling cutter with internal coolant designed for precision indexable-insert milling in CNC operations 16 mm shank diameter for compact toolholders Internal coolant for improved chip evacuation Compatible with Taegutec BLMP 0603 inserts Precision and rigidity for repeatable milling results The cutter is built around a 16 mm shank and a 150 mm overall length, offering a compact footprint with high torsional stiffness. That combination reduces chatter and increases positional repeatability on medium-duty milling tasks. For production environments where consistent part geometry matters, this configuration supports stable depth-of-cut and surface finish. The use of indexable inserts minimises downtime for edge changes and keeps process interruptions predictable. Improved coolant delivery and chip control for longer tool life Integrated internal coolant channels direct cutting fluid straight to the cutting zone, supporting efficient chip evacuation and reduced heat build-up at the cutting edge. A 40 mm cutting length provides an extended engagement zone while keeping the tool body compact, which helps maintain rigidity during extended passes. Effective coolant flow reduces thermal wear on inserts and contributes to consistent cutting forces, extending insert life and lowering overall tooling cost per component. Fast, secure insert clamping and straightforward maintenance Insert retention uses a Torx screw system to ensure stable clamping and repeatable seating. The cutter is designed for quick insert changes with a T8 Torx key and M3x6.2 fixing screws, allowing maintenance to be completed with standard workshop tools. The tool carries two cutting edges, enabling balanced cutting action and even wear distribution; this simplifies inventory management compared with multi-edge systems and keeps changeover times low. Production-oriented design for CNC shops and jobbers Weighing approximately 0.235 kg and identified as S479-1TM, the tool is optimised for automated tool changes and high-utilisation shop floors. Compatibility with Taegutec BLMP 0603 indexable inserts provides access to a broad range of grades and geometries, letting users match insert chemistry to the workpiece and cutting strategy. The compact design reduces spindle load and supports faster acceleration and positioning, helping to improve cycle times across diverse milling operations. Contact Metav Werkzeuge to discuss Teknik Makina's 16 mm end mill with internal coolant and ensure the correct insert grade and spindle setup for the intended application, or request stock and technical guidance from our Emmerich specialists Technical data Article number: S479-1TM Manufacturer: Teknik Makina Product type: End mill for indexable inserts Facts Diameter: 16 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.235 kg Special features Internal coolant Compatible with BLMP 0603 indexable inserts Matching insert manufacturer: Taegutec Torx key: T8 Fixing screw: M3x6.2 FAQ What inserts fit this tool? This end mill accepts BLMP 0603 indexable inserts; the cutter is specified for use with Taegutec BLMP 0603 inserts for predictable seating and performance. How is coolant supplied to the cutting edge? Internal coolant is routed through the tool body to the cutting zone, improving chip evacuation and reducing thermal stress at the insert edge. What tools are required for insert changes? Insert changes use a Torx T8 key with M3x6.2 fixing screws; the design supports quick and secure clamping for repeatable seating. How many cutting edges does the tool have? The cutter is configured with two cutting edges, providing balanced cutting forces and simplified inventory management. Which SKU identifies this item for ordering? Order reference is S479-1TM, which denotes the 16 mm shank end mill configured for BLMP 0603 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-engineered shank milling cutter that combines compatibility with LOGU 0303 indexable inserts and a robust 17 mm cutter diameter for consistent material removal; order directly via Metav Werkzeuge or ask the consultants for application advice. Shank milling cutter S676TM — for LOGU 0303 indexable inserts, 150 mm overall length (Teknik Makina) Shank milling cutter for industrial milling with indexable inserts, designed for secure clamping and efficient chip removal in workshop and production environments 17 mm shank diameter for secure clamping Compatible with LOGU 0303 indexable inserts 150 mm overall length for deeper reach Two cutting edges for efficient material removal Reliable cutting with standardised, replaceable inserts The S676TM is designed around the LOGU 0303 system of indexable inserts, providing predictable cutting behaviour and straightforward maintenance. By using standard inserts, tool life is largely determined by the replaceable cutting tips rather than the tool body, which reduces long-term tooling costs and simplifies inventory management. The combination of a 17 mm cutter diameter and a proven insert geometry delivers repeatable results across batch and single-piece production, making the tool suitable for tasks where consistent dimensional control is required. Secure clamping and reduced setup time for continuous production A focus on fast, reliable fastening reduces machine downtime: the tool features a 16 mm shaft diameter for stable clamping in standard holders and a cutting length of 50 mm to reach into deeper profiles. Inserts are secured using the M3x7 screw, tightened with a Torx T8 key, enabling repeatable torque and minimising the risk of insert movement during high-speed milling. These design elements translate directly into operational benefits — fewer interruptions for adjustment, lower risk of damaged inserts, and a steadier machining process overall. Compact, lightweight design suited to workshop and production use Weighing just 0.219 kg and offering two cutting edges, this cutter is easy to handle during setup and well balanced in the spindle for stable operation. Compatibility with Kyocera-branded insert systems widens the choice of cutting grades and geometries, allowing adaptation to different workpiece materials and finishes. The S676TM is therefore a practical option where a compact, indexable solution is required for repetitive milling, near-net shaping or slotting operations in a variety of metalworking contexts. For detailed application guidance on Teknik Cutting Tools' S676TM shank milling cutter and to confirm stock at Metav Werkzeuge, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S676TM Product type: Shank milling cutter Compatible inserts: LOGU 0303 (Kyocera) Manufacturer: Teknik Cutting Tools / Teknik Makina Dimensions & weight Cutter diameter: 17 mm Shaft diameter: 16 mm Overall length: 150 mm Cutting length (shank): 50 mm Cutting edges: 2 Weight: 0.219 kg eCl@ss: 21180806 Fastening & accessories Torx key: T8 Screw: M3x7 FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; this compatibility is specified for insert systems supplied by Kyocera and similar suppliers. Is the shank suitable for standard tool holders? Yes, the 16 mm shaft is compatible with common collet and chuck holders used in milling centres and machining centres. What is the reachable cutting length? The tool provides a 50 mm cutting length on the shank, with a total overall length of 150 mm, suitable for recessed or deeper cuts. How are the inserts secured? Inserts are fastened with an M3x7 screw using a Torx T8 key to ensure repeatable and secure clamping. For which applications is this cutter intended? Designed for industrial and workshop milling operations where an indexable solution is preferred for economical tip changes, the cutter suits profiling, slotting and general material removal tasks. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of 21 mm cutting diameter, internal coolant and a 20 mm shank for steady chip control and longer insert life; order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Shank milling cutter for LOGU 0303 indexable inserts — 21 mm, internal coolant (Teknik Makina) Shank milling cutter engineered for insertable milling with LOGU 0303 knives, suited to production and job-shop machining where reliable coolant delivery and simple insert handling matter 21 mm cutting diameter Internal coolant for improved tool life Compatible with LOGU 0303 indexable inserts 20 mm shank and 60 mm cutting length Consistent chip control for higher productivity The tool’s integrated internal coolant channel directs cutting fluid precisely to the cutting zone, reducing heat and promoting stable cutting conditions. With a 21 mm diameter and three cutting edges, the design supports balanced material removal and predictable cycle times. For shops aiming to increase throughput without sacrificing surface quality, the guided coolant flow lowers tool wear and helps maintain consistent tolerances across series production. Simple insert compatibility and maintenance reduces downtime Designed for LOGU 0303 indexable inserts and compatible with Kyocera replacement inserts, the cutter simplifies inventory and changeovers. The three-edge configuration provides a good compromise between cutting performance and economical insert consumption. Fast replacement is supported by an M3x7 Torx screw driven with a T8 key, while the standardised shank allows secure clamping in conventional holders — practical features that shorten maintenance intervals and keep machines cutting. Sturdy shank and defined engagement for reliable milling A 20 mm shank and an overall length of 150 mm offer rigid tool engagement and access to deeper features without undue deflection. The 60 mm cutting length is optimised for face and shoulder milling operations where extended reach is required. Combined with a tool mass of 0.365 kg, the cutter balances inertial stability with manageable handling. These mechanical properties deliver reproducible performance in small to medium batch production, supporting quality-focused workflows. For application advice or to secure Teknik Cutting Tools’ shank milling cutter via Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specification matching and delivery options. Technical data Article number: S679-1TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Facts Cutting diameter: 21 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 60 mm Number of cutting edges: 3 Weight: 0.365 kg Special features Internal coolant For LOGU 0303 indexable inserts Compatible insert manufacturer: Kyocera Torx screw: M3x7 Torx key: T8 Product type: shank milling cutter FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; Kyocera-compatible grades are specified for the best fit and performance. Is internal coolant available through the tool? Yes, the shank milling cutter features internal coolant delivery to the cutting zone for improved tool life and process stability. What are the key dimensions to check for holder compatibility? Check the 20 mm shank diameter and the overall length of 150 mm; the 60 mm cutting length is also relevant for reach and engagement planning. How are inserts secured on this tool? Inserts are fastened with an M3x7 Torx screw, tightened with a T8 key for reliable clamping and quick replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of modular indexable design, a 32 mm shank for stable clamping and three cutting edges for consistent material removal; order the shaft milling cutter R238TM directly via Metav Werkzeuge or consult our specialists for tailored advice. Shaft milling cutter R238TM — 32 mm shank, for RDMT 12T3 indexable inserts (Teknik Makina) The Shaft milling cutter R238TM is designed for secure indexable-insert milling, offering a compact solution for peripheral and face milling tasks in CNC environments Solid 32 mm shank for high rigidity Accepts RDMT 12T3 indexable inserts Three cutting edges for smooth material removal T15 Torx clamping for secure insert fixation Stable clamping for precise material removal The tool is built around a 32 mm shank that increases stiffness at the tool holder interface, which in turn improves cutting stability and reduces chatter. With three cutting edges the design balances cutting load and vibration, enabling more consistent chip formation and surface finish. The reduced deflection contributes to dependable repeatability on serial runs while keeping setup times predictable. Fast insert changes and reliable clamping The modular insert system accepts RDMT 12T3 indexable inserts, enabling rapid replacement without regrinding. Fixing uses a M3.5 locking screw together with a M3.5x8.5 Torx screw, tightened with a T15 Torx key, which simplifies maintenance and lowers downtime. This clear mechanical interface translates into predictable service intervals and easier stock management for production planners. Compact geometry for versatile machining With a 45 mm cutting length and a 150 mm overall length, the tool provides a practical balance between reach and rigidity for many workshop and CNC applications. At 0.876 kg, the cutter is light enough for stable high-speed rotation yet substantial enough to signal a robust construction. The combination of dimensions and indexable technology reduces tooling cost per part through reuse of inserts while preserving process stability. For secure machining with the sturdy 32 mm shank and RDMT 12T3 compatibility, contact Metav Werkzeuge for order handling and technical consultation — email info@metav-werkzeuge.com or call +49 2822 7131930 for delivery from Emmerich. Technical data Article number: R238TM Manufacturer: Teknik Makina Product name: Shaft milling cutter for RDMT 12T3 indexable inserts Facts Diameter: 32 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.876 kg ECLASS: 21180806 ETIM: EC011860 Special features For RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 SKU: R238TM FAQ Which indexable inserts fit this cutter? The cutter accepts RDMT 12T3 indexable inserts designed for the tool's pocket geometry and clamping system. What is the shank diameter and how does it affect stability? The 32 mm shank increases stiffness at the tool holder and improves resistance to deflection during milling operations. How many cutting edges does the cutter have? The tool is configured with three cutting edges, optimised to balance material removal rate and surface quality. Which screws and key are required for insert clamping? Insert clamping uses a M3.5 locking screw, a M3.5x8.5 Torx screw and a T15 Torx key for secure fixation. What are the overall and cutting lengths? Overall length is 150 mm and the cutting length is 45 mm, providing a practical compromise between reach and rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak No:9, Selcuklu/Konya, Turkey / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a combination of rigid 25 mm shank support, compatibility with SDMT 09T3 indexable inserts and secure Torx clamping for stable, repeatable milling results; order directly via Metav Werkzeuge or consult the sales team for application advice. Shank milling cutter S395TM — 25 mm shank, for SDMT 09T3 indexable inserts (Teknik Makina) Shank milling cutter S395TM is a shank-mounted indexable insert milling body designed for efficient face and slot milling with SDMT 09T3 inserts, delivering stable cutting performance in general machining applications. 25 mm shank diameter for rigid clamping Compatible with SDMT 09T3 indexable inserts Torx M3.5×8.5 clamping with T15 key 60 mm effective cutting length, two cutting edges Engineered rigidity for consistent material removal The S395TM is built around a 25 mm shank, which provides a high degree of axial and radial stiffness for demanding milling tasks. This rigidity reduces chatter and vibration, resulting in improved surface finish and longer insert life. By combining a robust shank with a 150 mm overall length, the tool body balances reach and stability, making it suitable for both through-pass and semi-deep cuts. The result is a reliable cutting solution that supports higher metal removal rates while maintaining dimensional consistency. Secure clamping for repeatable setups and safety Clamping reliability is ensured by the Torx M3.5×8.5 screw system tightened with a T15 key, creating a repeatable and secure seat for the SDMT 09T3 inserts. A stable clamping mechanism minimises indexable insert movement under load, which improves cutting predictability and reduces the risk of insert damage. The cutter features two cutting edges, allowing balanced engagement and even wear distribution; this extends service intervals and simplifies maintenance routines in production environments. Insert compatibility that streamlines tooling management Compatibility with SDMT 09T3 indexable inserts (manufacturer: ZCC) makes this milling body a practical choice for workshops that prioritise inventory efficiency. Using a standard insert format enables fast replacements and interchangeability across different tool bodies, reducing setup times and stock variety. The 60 mm effective cutting length provides the working depth needed for many peripheral and face milling operations, while the relatively light mass of 0.573 kg keeps handling easy during tool changes and minimises spindle load increases during acceleration. For procurement of Teknik Cutting Tools components such as the S395TM shank milling cutter, contact Metav Werkzeuge for tailored technical advice and reliable delivery from Emmerich. Technical data Article number: S395TM Manufacturer: Teknik Makina Product: Shank-mounted indexable milling cutter Application: for SDMT 09T3 indexable inserts (for SDMT 09T3 Indexable Inserts) Compatible insert producer: ZCC Numbers / Core technical data Shank diameter: 25 mm Effective cutting length: 60 mm Overall length: 150 mm Tool diameter: 25 mm Cutting edges: 2 Weight: 0.573 kg ECLASS: 21180806 ETIM: EC011860 Designs / Special features Torx screw: M3.5×8.5 Torx key size: T15 Insert type: SDMT 09T3 Files: migration IDs included Suitable for face and slot milling FAQ What insert type is required for this milling cutter? The milling body is designed for SDMT 09T3 indexable inserts; these are referenced in the product data and are compatible with the cutter geometry. Which clamping screw and key are used to secure inserts? Clamping is effected with a Torx M3.5×8.5 screw, tightened using a T15 Torx key for secure and repeatable insert fastening. What is the shank diameter and overall length of the tool? The tool features a 25 mm shank diameter and an overall length of 150 mm, with an effective cutting length of 60 mm. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the tool’s internal coolant and compact 17 mm cutting diameter for improved tool life and consistent chip control; the 16 mm shank and 150 mm overall length deliver stable clamping and reach for demanding setups. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter for WNMX 0603 indexable inserts — 17 mm cutting diameter, internal coolant (Teknik Makina) The Shank milling cutter for WNMX 0603 indexable inserts is a coolant-fed milling solution designed for precise, repeatable indexable-insert milling in industrial workshops and production environments. 17 mm cutting diameter Internal coolant for improved cooling Compatible with Korloy WNMX 0603 inserts T8 Torx key and M2.5x6.5 screws supplied Precision and consistent chip control for stable milling The tool combines a 17 mm cutting diameter with a 40 mm cutting length and a robust 150 mm overall length to balance reach and rigidity. Fitted for WNMX 0603 indexable inserts, the design uses internal coolant to route cutting fluid directly to the cutting zone, which reduces heat build-up and improves edge life. Two cutting edges contribute to a stable cutting action and predictable chip formation, making the cutter suitable for frequent changeover and serial machining where reproducible results are required. The 16 mm shank ensures secure clamping in common toolholders and collets, supporting accurate concentricity and reduced runout. Simple maintenance and secure assembly for shop-floor efficiency The assembly is engineered for straightforward servicing: insert fixation with an M2.5x6.5 screw and a T8 Torx interface simplifies insert changes and minimises downtime. Compatibility with Korloy WNMX 0603 inserts allows use of widely available indexable grades, lowering stocking complexity and enabling fast replenishment. Internal coolant passages reduce the need for complex external nozzling and help keep the workpiece and insert cooler during interruptions, which translates into fewer unexpected tool changes. The compact mass (approx. 0.241 kg) and balanced geometry make handling the tool in the workshop easier while keeping the focus on process reliability. Cost-efficiency through replaceable cutting edges and trusted tooling By using indexable inserts rather than solid cutting edges, this cutter reduces long-term tooling costs: worn edges are swapped quickly without removing the full tool from the spindle, and production pauses are minimised. The internal coolant provision supports longer insert life and a more consistent surface finish, helping to uphold quality standards across batches. Produced by Teknik Makina, the shank milling cutter pairs industrial-grade manufacture with practical serviceability, offering a pragmatic solution for operations that require dependable, repeatable milling performance. Contact Metav Werkzeuge in Emmerich to confirm fitment and order Teknik Makina’s coolant-fed shank milling cutter; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for immediate assistance. Technical data Article number: S903-1TM EClass: 21180806 UID: S903-1TM Dimensions & weights Cutting diameter: 17 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.241 kg Features & compatibility Internal coolant: yes Compatible inserts: WNMX 0603 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x6.5 Manufacturer: Teknik Makina FAQ What insert type does this cutter take? The cutter is designed for WNMX 0603 indexable inserts, enabling quick insert changes and familiar insert geometries. Is internal coolant supplied through the tool? Yes, the tool features internal coolant channels to direct cutting fluid to the insert cutting edge for improved cooling and chip control. Which shank diameter is required for the holder? A 16 mm shank diameter is specified, so holders or collets matched to a 16 mm shank are required for correct clamping. Are the fastening components included for insert mounting? The cutter specification lists an M2.5x6.5 screw and a T8 Torx interface, which are provided for secure insert mounting and straightforward servicing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a purpose-built extension that increases the working reach of a boring tool set while keeping tool inventory simple and traceable; the THB10TM combines straightforward compatibility with a proven brand connection to Teknik Makina — order directly via Metav Werkzeuge or consult our specialists for integration advice Extension for Boring Tool THB10TM by Teknik Makina — reach extension for boring operations The Extension for Boring Tool is designed to extend the effective length of a boring tool set for deeper internal machining and improved accessibility in confined bores Extension for boring tool sets Compatible with Teknik Makina tools Article number THB10TM for ordering Extend reach for deeper bores with assured alignment The THB10TM extension converts an existing boring tool set into a solution for deeper internal machining, allowing access where a standard boring bar would be too short. By increasing the effective working length, the accessory reduces the need for multiple tool changes and repositioning, which translates into fewer interruptions to the machining cycle. The accessory’s role is purely to extend reach while maintaining the original tool’s cutting geometry and alignment; this keeps the resulting bores within the expected tolerance band and helps preserve the original cutting conditions. For operations where depth and access are the limiting factors, this accessory provides a pragmatic way to adapt existing tooling without a complete retooling strategy. Faster throughput through fewer set-ups and predictable performance Integrating an appropriately rated extension into a boring workflow supports more efficient production planning: longer reaches mean fewer staged operations and reduced set‑up time per workpiece. The accessory complements the boring bar’s geometry and enables longer single‑pass cuts where machine rigidity and process parameters permit. That rational gain — fewer changeovers and less operator handling — should be weighed against machine spindle overhang and recommended cutting data. When used as part of a considered process, the extension contributes to improved productivity and steadier cycle times, which are decisive in high‑mix or small‑batch environments where every minute saved on set‑up compounds into measurable throughput gains. Practical compatibility advice and specification checks before ordering The extension is intended for use with boring tool sets and is listed as article THB10TM from Teknik Makina; compatibility with specific holders and machine spindles must be confirmed prior to installation. Check machine overhang limits, spindle taper and clamping interfaces to ensure safe operation under the intended cutting conditions. For components and fixtures where balance and vibration are critical, a short trial cut and a stepwise increase in cutting parameters are recommended to validate the assembly. If additional documentation is required, the product reference includes linked files for technical review. For those planning integration into existing fleets, Metav’s advisory resources can assist in matching the accessory to the correct toolset and in defining safe operating envelopes. For supply from Emmerich and tailored technical guidance on the Teknik Makina extension THB10TM, contact Metav Werkzeuge by email or phone to discuss compatibility and lead times Technical data Article number: THB10TM Name: Extension for Boring Tool Manufacturer: Teknik Makina eClass: 21041590 Files: 62de7e64a9cff922f4703d2f, 62de7ef033927e49dbf32799 Core data eClass: 21041590 UID: THB10TM Application / Features Application: for Boring Tool Brand: Teknik Makina FAQ Is this extension compatible with standard boring bars? The extension THB10TM is intended for use with boring tool sets; compatibility depends on the clamping interface and holder type used in the existing boring bar assembly. Can the extension be used for deep‑hole boring on small lathes? Deep‑reach use is possible where machine rigidity and spindle overhang permit; verify machine limits and conduct a controlled trial with the THB10TM before full production use. Will the extension affect bore accuracy? When correctly mounted and within the machine’s stiffness limits, the extension preserves the original tool’s cutting geometry and can maintain expected bore tolerances. What should be checked before installing the extension? Confirm spindle taper, clamping interface, maximum permissible overhang and balance; these checks ensure safe operation with the Teknik Makina THB10TM. Are there technical documents available for planning and installation? Product files are provided with the article THB10TM for technical review and should be consulted when planning integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure M12 connection and a 150 mm overall length to extend machining reach without compromising rigidity; the compact 25 mm shank ensures compatibility with standard holders. Order the extension via Metav Werkzeuge or consult the Metav team for technical matching. Extension for screw-in cutters VT514TM by Teknik Makina — 150 mm reach, M12 thread Extension for screw-in cutters VT514TM provides additional reach for screw-in cutter systems, designed for milling applications where extended tool projection is required without sacrificing runout performance. M12 thread for secure connection 150 mm overall length for extended reach 25 mm shank diameter for standard holders 40 mm cone length ensuring stable seating Greater reach while maintaining stability With an overall length of 150 mm, this extension increases operational reach for screw-in cutter setups while preserving axial integrity. The 25 mm shank is sized for common toolholder standards, keeping the centre of mass predictable during rotation. Longer projections are often associated with greater deflection; the combination of shank diameter and a precise seating geometry reduces lateral movement and helps maintain consistent machining results. This makes the accessory suitable for tasks that demand extended clearance, such as machining deep pockets or accessing recessed features, while retaining a focus on measurable performance. Secure interface and precise seating for repeatable results A dependable connection is central to repeatable machining. The M12 thread pairs with a 40 mm cone length to provide a secure seating area, and the 20.7 mm opening for the screw-in cutter ensures correct alignment at the interface. These dimensions are chosen to deliver a compact but robust joint that resists loosening under typical milling loads. By translating geometric accuracy into operational reliability, the extension supports consistent runout behaviour, which is essential for maintaining surface finish and tool life in production environments. Designed for workshop efficiency and compatibility The extension is tailored to integrate with common screw-in cutter systems and standard holders, reducing the need for multiple bespoke adaptors. At a weight of 0.546 kg, the component is substantial enough to feel robust without unduly increasing spindle load. Workshops benefit from lower tooling complexity: utilising a single, well-specified extension can streamline tool changeovers and lower inventory diversity. The compact design simplifies storage and handling while enabling longer reach where required, supporting more flexible job planning on milling machines and machining centres. Reliability, procurement and quality assurance Manufactured for consistent function, the extension focuses on precise mechanical interfaces rather than surface treatments or coatings; declared dimensions translate directly to fit and stability in operation. Sourcing through a specialist distributor provides an additional quality filter: Metav Werkzeuge combines wide stock availability with technical competence, supporting reliable supply chains and practical advice for industrial users. The product’s straightforward specification aids specification checks and reduces the risk of mismatched interfaces during procurement and assembly. Contact Metav Werkzeuge for delivery and technical matching of the VT514TM extension — the Metav team can advise on suitability for specific cutter systems and arrange prompt dispatch from Emmerich Technical data Article number: VT514TM Manufacturer: Teknik Makina Name: Extension for screw-in cutters Weight: 0.546 kg Dimensions and core data Overall length: 150 mm Shank diameter: 25 mm Opening for screw-in cutter: 20.7 mm Cone length: 40 mm Thread: M12 Features and compatibility Suitable for screw-in cutters Standard shank for common holders Designed for extended reach in milling applications FAQ What machines is the extension compatible with? The extension for screw-in cutters VT514TM is compatible with milling machines and machining centres that accept standard holders and screw-in cutter systems; confirmation of holder sizes is advised before fitting. How does the M12 thread affect connection security? The M12 thread on the VT514TM provides a compact, secure mechanical interface that, when combined with the cone length, ensures stable seating and reduced risk of loosening under normal milling loads. Is the extension suitable for heavy-duty machining? The extension is designed for extended reach applications with a robust shank diameter and precise seating; suitability for heavy-duty operations depends on the specific machine, speeds and feeds, and should be evaluated against those parameters. What are the critical dimensions to check before ordering? Confirm the overall length (150 mm), shank diameter (25 mm), the opening for the screw-in cutter (20.7 mm) and the thread (M12) to ensure compatibility with the existing tool system. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise combination of extended reach and secure threaded attachment: the 150 mm overall length and M8 interface enable deeper machining without compromising clamping stability. Order the VT504TM directly via Metav Werkzeuge or consult Metav's technical team for application matching. Extension for screw-in cutter VT504TM — Teknik Makina, 150 mm, M8 thread Extension for screw-in cutter VT504TM delivers a compact solution for extending the reach of screw-in milling cutters in constrained setups and deeper machining operations. *150 mm overall length *M8 threaded interface for secure attachment *16 mm shank for standard toolholders *Lightweight design at 0.234 kg Extended reach with industrial-grade stability The VT504TM extension provides a reliable method to increase working depth while maintaining machining stability. With an overall length of 150 mm, the component allows access to recessed features and deeper pockets without the need for improvised extensions that increase runout. The M8 thread forms a positive, repeatable mechanical connection to compatible screw-in cutters; this threaded coupling reduces axial play and supports consistent tool positioning. For production or maintenance environments where tool repeatability is essential, this extension balances reach with functional rigidity to support accurate machining outcomes. Secure connection and controlled concentricity Designed for compatibility with screw-in milling cutters, the extension features a 16 mm shank and a screw-in opening sized at 14 mm, matched to a 30 mm cone length for the cutter interface. The combination of 16 mm shank geometry and a precision-threaded M8 interface promotes stable clamping in common collet or chuck setups. By keeping shank runout low and the clamped length sufficient, the accessory helps to preserve cutting-edge life and surface finish. The product’s geometry is explained here in plain terms: the cone length ensures the cutter seats fully in the extension, the shank diameter suits standard holders, and the thread locks the assembly for repeatable performance. Low mass for improved handling and dynamic behaviour At just 0.234 kg, this extension is lightweight yet purpose built for workshop use. Reduced mass at the tool end lowers centrifugal forces during rotation and simplifies dynamic balancing when high spindle speeds are required. For machinists, this translates into easier tool changes, reduced spindle load, and a lower tendency for chatter in many common applications. The modest weight also supports manual handling during set-up and maintenance, while still providing sufficient material to withstand regular workshop use. Practical compatibility and straightforward installation The unit has been specified to fit into standard machining workflows: an M8 threaded interface for the cutter, a 14 mm screw-in opening to accept the cutter root, and a 16 mm shank to suit common holders. Installation is mechanical and direct — the cutter is screwed into the extension and the shank is secured in the toolholder — eliminating the need for adaptors or special fixtures. For complex assemblies or unusual machine interfaces, Metav’s documentation and product experts are available to clarify fitment options and to recommend appropriate clamping practices to preserve accuracy and safety. For detailed application advice, to confirm fitment on specific machines, or to order the Teknik Makina VT504TM extension with its M8 threaded interface, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: VT504TM Manufacturer: Teknik Makina Facts Total length: 150 mm Shank diameter: 16 mm Screw-in cutter opening: 14 mm Cone length for screw-in cutter: 30 mm Thread: M8 Weight: 0.234 kg Special features Threaded interface for screw-in cutters Compatible with screw-in milling cutters Compact extension for deeper reach FAQ Which cutters are compatible with this extension? The VT504TM extension for screw‑in cutter by Teknik Makina is compatible with screw-in milling cutters that match an M8 threaded connection and a 14 mm root diameter; check cutter specifications against these dimensions. How does the M8 thread affect setup security? An M8 threaded interface on the VT504TM creates a positive mechanical connection between extension and cutter, improving axial stability and repeatability during repeated mounting and demounting. Can the extension be used for deep pocket machining? Yes, the 150 mm overall length enables deeper reach for recessed machining tasks while the design aims to maintain clamping stability for consistent cutting performance. Will the 0.234 kg weight influence spindle dynamics? The lightweight construction of 0.234 kg reduces tool end inertia and generally aids dynamic behaviour at higher spindle speeds, while still offering sufficient mass for stable handling. What holder dimensions are required for the shank? The shank diameter is 16 mm; the extension is intended for holders or collets that accept a 16 mm shank and secure it with the usual clamping methods. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of dependable mounting, extended reach and precise compatibility to streamline machining setups. The M10-threaded extension delivers stable clamping with a 20 mm shaft and a 150 mm overall length, making it a practical choice for workshop and production environments — order via Metav Werkzeuge or consult our specialists for fitment advice. Extension for screw-in cutters VT510TM — M10 thread, 150 mm overall length (Teknik Makina) A robust Extension for screw-in cutters VT510TM engineered to extend tool reach in milling and finishing tasks while maintaining secure mounting for screw-in cutter systems. M10 thread for secure tool mounting 150 mm overall length for extended reach 20 mm shaft diameter for stable clamping Compatible with screw-in cutters with 17.7 mm opening Greater reach without sacrificing rigidity This shaft extension provides an effective way to reach recessed or hard-to-access features while retaining machining stability. The 150 mm total length increases working reach, and the 20 mm shaft diameter helps preserve torsional stiffness during cutting operations. For setups that require screw-in cutter systems, the integrated M10 thread ensures a positive mechanical connection, reducing unwanted micro-movement. This results in fewer re‑setups and less downtime, which can translate into measurable efficiency gains on the shop floor. Precise fit and concentric mounting for consistent finishes Compatibility with cutters that have a 17.7 mm opening is ensured by the designed shaft geometry and taper. The 40 mm taper at the tool end promotes accurate seating and concentricity, helping to maintain surface finish and dimensional consistency across serial parts. Where surface quality and repeatability matter, a correctly matched extension reduces vibration and run‑out, producing smoother tool engagement and less tool wear — a clear advantage for both prototype work and small-batch production. Practical workshop benefits and handling Weighing in at approximately 0.357 kg, the extension is easy to handle during tool changes yet substantial enough to avoid flex under moderate cutting loads. The unit’s compact profile and standard thread format simplify storage and tool management within existing arbors, so integration into current tool inventories is straightforward. For shops using screw-in cutters, this accessory increases versatility by enabling a greater range of machining envelopes without additional specialised holders. Contact Metav Werkzeuge for specification checks or to confirm compatibility of the Teknik Makina extension VT510TM with existing screw-in cutters; our Emmerich team provides expert guidance and reliable supply for industrial tooling needs Technical Data SKU: VT510TM Manufacturer: Teknik Makina Thread: M10 Total length: 150 mm Weight: 0.357 kg Shaft diameter: 20 mm Cutter opening diameter: 17.7 mm Taper length: 40 mm FAQ What thread does the extension use and is it standard for screw-in cutters? The extension uses an M10 thread, which is a common mounting thread for many screw-in cutter systems; VT510TM is therefore compatible with standard M10 fittings used in workshop tooling. Can the extension maintain concentricity for finishing passes? Yes, the 40 mm taper and precise shaft dimensions of the VT510TM support accurate seating and help maintain concentricity for consistent finishing results. Which shaft diameter ensures stable clamping during milling? The 20 mm shaft diameter provides a balance between rigidity and accessibility, supporting stable clamping under typical milling and finishing loads. Is the extension suitable for deep or recessed machining operations? The 150 mm overall length is intended to extend reach for recessed features while preserving mounting security, reducing the need for complex holder assemblies. How heavy is the extension and does weight affect handling? At about 0.357 kg, the extension is light enough for easy handling during tool changes while remaining robust enough to minimise flex during operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure M10 connection, a 20 mm shank for stable clamping and a compact 150 mm overall length to reach deeper pockets without compromising rigidity; order directly via Metav Werkzeuge or consult our specialists for compatibility and supply. Extension for screw‑in cutters VT511TM — M10 threaded, 150 mm overall length (Teknik Makina) Extension for screw‑in cutters VT511TM designed to extend tool reach for milling operations where a precise, secure connection to screw‑in cutters is required M10 threaded connection for secure fitting 150 mm overall length for extended reach 20 mm shank diameter for stable clamping Compatible with screw‑in cutters (17.7 mm opening) Reach deeper features with maintained stiffness The extension delivers an extended reach of 150 mm overall length while keeping axial stiffness high. By increasing reach without resorting to longer, unsupported tooling, the adapter reduces vibration and maintains cutting accuracy; the combination of a 20 mm shank and a precisely machined taper ensures that the toolholder remains rigid under load. This means fewer reworks and improved component quality in milling and finishing operations. Secure mechanical interface for reliable toolholding A decisive element is the M10 thread and the internal seating designed for screw‑in cutters with a 17.7 mm opening. The engagement is aided by a 40 mm taper length, which centres the cutter and minimises radial runout. For operations where repeatability matters, this mechanical interface provides a secure fit and quick replacement of cutters while preserving concentricity and surface finish. Practical workshop advantages and compatibility Weighing in at 0.354 kg, the extension is lightweight yet sufficiently robust for typical workshop use. The standard 20 mm shank makes it compatible with common collet chucks and toolholders that accept this diameter. As an accessory for screw‑in milling cutters, the component simplifies setups by extending reach without introducing complex fixturing, improving throughput in small-batch production and maintenance tasks. For precise extension solutions from Teknik Cutting Tools, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VT511TM Manufacturer: Teknik Makina Overall length: 150 mm Shank diameter: 20 mm Cutter opening diameter: 17.7 mm Taper length: 40 mm Weight: 0.354 kg Thread: M10 Suitable for screw‑in cutters Brand: Teknik Makina FAQ Is the extension compatible with standard screw‑in cutters? Yes. The extension is designed for screw‑in cutters with a 17.7 mm opening and secures via the M10 threaded connection, matching the VT511TM specification. Which shank holders accept this extension? The extension uses a 20 mm shank and is suitable for toolholders and collets that accept 20 mm shanks. How does the taper length influence accuracy? The 40 mm taper length centres the cutter in the seating to reduce radial runout, improving concentricity and surface finish during milling. What are the exact dimensions and weight? Overall length 150 mm, shank diameter 20 mm, cutter opening 17.7 mm, taper length 40 mm; weight 0.354 kg. How is the cutter secured to the extension? The cutter is secured by the M10 threaded connection and the internal taper seating, providing a mechanically stable interface. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise fitment, extended reach and light weight to streamline machining set-ups and reduce tool changes; order the extension directly via Metav Werkzeuge or ask the consultants for compatibility advice. Extension for screw-in cutters VT505TM — 150 mm reach, M8 thread (Teknik Cutting Tools) A compact tool extension, the Extension for screw-in cutters VT505TM increases reach for threaded milling cutters in CNC and manual machines while maintaining secure clamping and low additional spindle load. 150 mm overall length for increased reach M8 thread for standard screw-in cutters 16 mm shaft for robust tool clamping Lightweight: 0.23 kg reduces spindle load Secure connections and extended working range for improved cycle flow The extension is engineered to provide a reliable threaded connection and added reach without compromising stability. With a M8 screw interface and a full 150 mm overall length, the device is intended to extend the effective working distance of screw-in milling cutters while preserving concentricity. This reduces the need for repositioning or specialised long-reach cutters and supports smoother production sequences in batch and single-part operations. The combination of defined thread geometry and controlled dimensions translates into predictable behaviour under cutting loads. Compatibility clarified: what the dimensions mean for tool choice Compatibility is straightforward: the extension accepts screw-in cutters designed for a 14 mm opening and a cone length of 30 mm, and is mounted on a 16 mm shaft for standardised clamping. For workshops unfamiliar with these terms, the opening diameter refers to the receptacle on the cutter body, while the cone length describes the tapered engagement region that ensures axial and radial location. By matching these dimensions, the extension allows existing screw-in milling cutters to be used at increased reach without modifying cutter geometry or machine interfaces. Lower spindle stress and consistent clamping for reliable finishing Weighing just 0.23 kg, the accessory adds minimal rotating mass, which helps to keep spindle loads and dynamic imbalance low during operation. The 16 mm shaft diameter supports robust clamping, reducing runout risk compared with slender adapters. In practice this improves surface finish stability and reduces the frequency of rework caused by vibration-induced tool deviation. The result is a dependable extension that supports consistent part quality and efficient machine uptime. Practical supply and service considerations for workshop integration Sourced from Teknik Cutting Tools and distributed through Metav, the extension fits into a pragmatic supply chain designed for industry use. Metav’s inventory approach and product range support quick replacement and centralised procurement, which simplifies stock management for workshops and small manufacturers. If application-specific data or dimensional drawings are required for fixture checks, these details can be requested to verify fit before installation. For tailored compatibility checks or to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machine interfaces and delivery options Technical data Article number: VT505TM ECLASS: 21189208 ETIM: EC002219 Facts Overall length: 150 mm Shaft diameter: 16 mm Cutter opening diameter: 14 mm Cone length (cutter engagement): 30 mm Thread: M8 Weight: 0.23 kg Special features Designed for screw-in milling cutters Threaded M8 connection 16 mm shaft for standard clamping systems Light construction to reduce added spindle mass FAQ What types of cutters fit this extension? The extension is designed for screw-in milling cutters with a 14 mm opening and a 30 mm cone engagement; these dimensions ensure correct seating and secure clamping. Is the VT505TM suitable for CNC and manual milling machines? Yes, the VT505TM extension from Teknik Cutting Tools is intended for both CNC and manual setups where increased reach is required while maintaining a robust 16 mm shaft clamping. How does the weight influence spindle performance? At 0.23 kg the accessory adds minimal rotating mass; this helps to keep spindle load and dynamic imbalance low compared with heavier extensions. Can this extension be used with any M8-threaded cutter? The M8 thread provides a standardised connection, but correct fitment also depends on the cutter’s 14 mm opening and 30 mm cone length; matching all three dimensions is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure M10 screw-in connection, a 150 mm overall length for extended reach and a stable 19 mm shank to improve machining access and process reliability; order the extension directly via Metav Werkzeuge or consult our specialists for integration advice. Extension for screw-in cutters — M10 thread, 150 mm overall length by Teknik Makina The Extension for screw-in cutters is a threaded mounting adapter designed to increase tool reach and maintain concentricity when using thread-mounted milling cutters in CNC and manual machining setups. M10 threaded interface for secure mounting 150 mm overall length for extended reach 19 mm shank diameter for stable clamping Lightweight at 0.324 kg for easy handling Reach deeper without compromising stability The extension combines a 150 mm overall length with a 19 mm shank diameter to permit machining in deeper bores and recesses while preserving tool alignment. The longer reach reduces the need for intermediate setups and fixtures, which can shorten cycle times and lower logistical overhead. Thanks to the robust geometry, the adapter supports consistent runout behaviour, so concentricity is maintained and surface finish quality is not sacrificed when accessing difficult-to-reach features. Secure seating and reliable thread connection A standard M10 thread provides a repeatable, mechanical interface with thread-mounted cutters; the integrated seating cone of 30 mm length ensures a firm axial location for the cutter body. This design reduces micromovement under cutting loads and simplifies mounting: the screw-in system guarantees a direct mechanical lock that transfers torque efficiently, while the modest mass of 0.324 kg keeps dynamic imbalance to a minimum. The specified seating opening of 17.7 mm is the reference for compatible cutter bodies and clamping sockets. Practical fit into workshop workflows Intended for use with thread-mounted milling cutters within cutting-tool and CNC environments, the extension is a straightforward solution to extend tool reach without complex toolholder changes. The compact, lightweight nature supports quick handling during tool changes and minimises additional spindle load. By enabling access to deeper or recessed machining areas, this adapter can reduce fixturing time and increase throughput, supporting a smoother production flow and higher machine utilisation. Contact Metav Werkzeuge for advice on integrating the Teknik Makina extension into existing tooling setups and to secure reliable supply from Emmerich. Technical data Article number: VT507TM Manufacturer: Teknik Makina SKU: VT507TM eClass: 21189208 ETIM: EC002219 Facts Overall length: 150 mm Shank diameter: 19 mm Cutter seating opening: 17.7 mm Seating cone length: 30 mm Thread: M10 Weight: 0.324 kg Special features For screw-in cutters Thread-mounted interface Long cone for axial seating Lightweight design for reduced spindle load Suitable for CNC and manual milling applications FAQ What thread does the extension use? The extension uses an M10 threaded connection for screw-in mounting, ensuring a secure mechanical interface with thread-mounted cutters. Which cutter seating dimensions are required? The adapter is specified for cutter bodies with a seating opening of 17.7 mm and a seating cone engagement of 30 mm. How long is the extension and what benefit does that provide? With an overall length of 150 mm, the extension allows access to deeper bores and recessed features, reducing the need for additional fixturing or secondary setups. Is the adapter heavy and will it affect spindle balance? At 0.324 kg the adapter is lightweight; its compact mass helps to minimise additional imbalance, though final balance depends on the specific tool assembly. Which applications are best suited to this extension? The product is intended for use in milling and machining workflows with thread-mounted cutters, particularly where extended reach or reduced setup complexity is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a secure M12 threaded connection and a 150 mm overall length provides extended reach without compromising seating stability; this supports efficient machining in recessed or hard-to-access areas. Order the extension directly via Metav Werkzeuge or ask our consultants if additional technical details are required. Extension for screw-in cutter VT512TM — M12 thread, 150 mm overall length (Teknik Makina) The Extension for screw-in cutter VT512TM is a precision tool extension designed to increase reach and ensure stable seating of screw-in cutters for milling and CNC toolholders. M12 thread for secure mounting 150 mm overall length for extra reach 24 mm shank diameter for standard holders 40 mm long taper for stable cutter seating Reach further while keeping tool stability The extended design delivers 150 mm overall length to access deeper bores and recessed features while retaining a compact footprint in the tool chain. The combination of a 24 mm shank and a long taper (40 mm) supports axial and radial stability, so concentric performance is preserved during high-precision operations. Choosing an extension with these dimensions reduces the need for secondary setups and enables machining tasks that would otherwise require bespoke fixturing or multiple operations. Secure connection engineered for repeatability A robust M12 thread provides a positive, reproducible interface; when combined with the 20.7 mm opening for the screw-in cutter, the connection is engineered to minimise runout and vibration. The extension’s mass (approx. 0.508 kg) has been balanced for stable handling in many standard toolholders, so the assembly is suited to routine workshop usage where repeatable positioning and quick changeovers are valued. Where concentricity is critical, the precise taper length improves seating and alignment. Practical benefits for workshop productivity Built to integrate into established tool systems, the VT512TM from Teknik Makina reduces handling complexity for tasks that need extra reach without sacrificing precision. The extension simplifies set-up procedures and shortens machining cycles by allowing cutters to remain mounted in a stable position while reaching otherwise inaccessible areas. The net effect is improved throughput and fewer interruptions for re-clamping or tool swaps, which supports more efficient batch and single-part production alike. Compatibility notes and installation guidance This extension is intended for use with screw-in cutters that fit an M12 seat and a cutter shank opening of 20.7 mm; the 24 mm exterior shank diameter matches many standard holders. The 40 mm taper length secures the cutter in the extension and promotes reliable seating. Compatibility should be confirmed against holder and cutter dimensions before ordering to ensure a correct fit and optimal performance. For tailored advice on the VT512TM extension from Teknik Makina or to confirm compatibility and delivery options, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data SKU: VT512TM Manufacturer: Teknik Makina Thread: M12 Overall length: 150 mm Weight: 0.508 kg Shank diameter: 24 mm Shank opening for screw-in cutter: 20.7 mm Long taper for screw-in cutter: 40 mm Core specifications Shaft diameter: 24 mm Opening for cutter: 20.7 mm Taper length: 40 mm Overall length: 150 mm Thread: M12 Weight: 0.508 kg Special features Suitable for screw-in cutters Secure M12 threaded connection Extended reach for deep milling Balanced design for stable seating FAQ Is the extension compatible with standard M12 screw-in cutters? The VT512TM extension is designed for cutters that use an M12 threaded seat and a shank opening of 20.7 mm; compatibility should be checked against the cutter and holder dimensions. Will the extension affect concentricity in critical operations? The long taper and 24 mm shank diameter are intended to maintain concentricity and stable seating; correct installation and inspection of the threaded connection will help ensure repeatable alignment. What toolholders are suitable for this extension? The extension’s 24 mm shank is compatible with holders that accept that diameter; confirm holder clamping range and runout specifications before use. How heavy is the extension and does weight require counterbalance? The VT512TM weighs approximately 0.508 kg; in most standard setups this mass is acceptable, but balance considerations should be made for very high-speed applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com