Gibt es einen Hahn und Kolb Online Shop?

Take advantage of precise, repeatable clamping for indexable turning inserts combined with a compact, easy-to-stock design; the result is fewer changeovers and steadier machining. For procurement or technical queries, order the BK020TM via Metav Werkzeuge or consult their specialists for application advice. Clamping prong BK020TM – compact clamp for indexable turning inserts by Teknik Cutting Tools The clamping prong BK020TM is a compact clamping component intended for securing indexable turning inserts in standard toolholders, ensuring consistent retention in workshop and production settings. Fits DNMG 15, CNMG 12 and SNMG 12 Compact clamping component, 0.1 kg For indexable turning insert holders Manufactured by Teknik Cutting Tools Faster set-up through precise clamping A well-matched clamping component directly reduces cycle interruptions. The BK020TM is designed to work with common insert types — DNMG 15, CNMG 12 and SNMG 12 — which simplifies inventory matching and shortens tool change procedures. By standardising on a single, compatible prong, toolroom managers gain more predictable results during insert changes and avoid time lost to ill-fitting clamps. The light mass of 0.1 kg contributes to easy handling without compromising retention forces required for accurate turning. Stable retention for repeatable machining outcomes Retaining the insert securely is essential for repeatable dimension and surface quality. This clamping component provides a reliable mechanical interface between the insert and the holder, improving the consistency of cutting geometry from one index to the next. For users less familiar with indexable tooling, an indexable insert is a replaceable cutting part that is mounted in a toolholder; a secure clamp keeps that part seated correctly, which helps to maintain cutting angles and minimise vibration during operation. The result is steadier machining and more consistent part quality. Compact design that simplifies stock control Small, purpose-built components reduce complexity in procurement. The slender footprint and straightforward function of this clamping prong make it simple to store and replace as part of routine maintenance. As a single SKU item, it supports streamlined ordering and reduces the number of special parts held in reserve. Supplied under Teknik Cutting Tools' designation, the component integrates with standard turning systems and promotes efficient workshop logistics without adding unnecessary variety to the tool crib. Contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply of the BK020TM clamping prong from Teknik Cutting Tools — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BK020TM Manufacturer: Teknik Makina Facts Weight (kg): 0.1 ECLASS: 21189290 Special features Suitable for DNMG 15, CNMG 12 and SNMG 12 Indexable turning insert clamping prong FAQ Which insert types does this clamping prong support? The clamping prong is compatible with DNMG 15, CNMG 12 and SNMG 12 inserts for standard turning applications. What is the mass of the BK020TM? The BK020TM has a weight of 0.1 kg. What is the intended use of this component? The component secures indexable turning inserts in toolholders to ensure correct seating and repeatable machining results. How is the item identified for ordering? Order reference is BK020TM; it is supplied by Teknik Cutting Tools and listed under that SKU. Can this prong be used across different toolholder systems? The prong is designed for holders accommodating the listed insert sizes; compatibility with specific holders should be confirmed against holder specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of compact compatibility with CNMG 16 and a lightweight construction that supports quick tool changes and consistent clamping. The secure design reduces setup time and helps maintain production flow — order the clamping jaw directly via Metav Werkzeuge or consult our specialists for application guidance. Clamping Jaw BK018TM — CNMG 16 compatibility, workshop-ready, Teknik Makina The Clamping Jaw BK018TM is a compact workholding component intended for turning applications where CNMG 16 inserts are used; it provides concise, reliable clamping in constrained tool setups. Compatible with CNMG 16 inserts Precision machined for reliable clamping Lightweight 0.1 kg Suitable for workshop and production use Reduced setup time through accurate insert retention The compact clamp head has been designed to secure indexable inserts with consistent repeatability, which translates into reduced setup time and fewer interruptions on the machine. Because the component is matched to the CNMG 16 geometry, the insert seats precisely and the clamping action is focused where it matters, helping to maintain cutting stability and surface quality. This targeted fit supports predictable tool behaviour in series production and one-off jobs alike, enabling smoother cycle planning and less rework. Practical handling and minimal tool overhang for safer machining A small mass of 0.1 kg keeps the tool assembly light, which eases handling during changeovers and reduces inertia at higher spindle speeds. The compact design benefits both manual tool changes and automated tool stations by limiting overhang and contributing to a better dynamic balance of the toolholder. The result is improved operator ergonomics and a lower risk of vibration-related edge wear, supporting longer insert life and steadier process results across batches. Straightforward integration and stock assurance for the shopfloor The component is manufactured under the Teknik Cutting Tools designation and supplied with the SKU BK018TM for easy identification in procurement and inventory systems. Its clear compatibility with CNMG 16 inserts simplifies parts management and replacement planning in mixed fleets. Choosing this clamping solution from a dependable distribution channel reduces downtime risk through consistent availability and a simplified spare-parts strategy, allowing production planners to focus on throughput rather than unexpected supply gaps. Contact Metav Werkzeuge for tailored advice on BK018TM from Teknik Cutting Tools and secured supply from our Emmerich facility, or request application support by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: BK018TM Manufacturer: Teknik Cutting Tools Designation: Clamping jaw eClass: 21189290 Facts Weight: 0.1 kg Special features Compatible with CNMG 16 inserts SKU: BK018TM FAQ Which insert type fits this clamping component? The clamping jaw is compatible with CNMG 16 indexable inserts and is dimensioned to match that insert geometry. Is the component suitable for production use or only for prototypes? This compact clamping solution is suitable for both workshop and production use, offering a lightweight option for frequent changeovers. How heavy is the unit and does weight matter for balance? The unit weighs 0.1 kg; the low mass helps reduce tool overhang and can improve dynamic balance in many setups. Who manufactures the clamping jaw and how is it identified? The part is produced by Teknik Cutting Tools and identified by SKU BK018TM for procurement and stock control. Does the design support straightforward stocking in spare-part inventories? Yes — the explicit compatibility with CNMG 16 and the clear SKU simplify spare-part management and replacement planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise parting capability and broad compatibility: the holder’s 25 mm cutting head and 4 mm cutting width deliver stable grooves while the left‑hand orientation suits dedicated turning operations. Order this tool directly via Metav Werkzeuge or consult our technical team for integration advice. Parting Tool Holder D810TM — left‑hand parting and grooving holder by Teknik Makina, for Korloy MGM‑4 inserts The Parting Tool Holder D810TM is a left‑hand grooving and parting holder designed for medium‑to‑heavy turning, offering a compact 25 mm cutting head and compatibility with Korloy MGM‑4 indexable inserts for repeatable cut‑off performance. Left‑hand cutting direction 25 mm cutting head width 4 mm cutting edge width Compatible with Korloy MGM‑4 inserts High‑precision parting where cycle time matters The D810TM parting holder combines a stable clamping design with a compact head geometry to reduce vibration during cut‑off operations, which increases tool life and surface quality. The 25 mm cutting head and 45 mm cutting height give a secure platform for short, repeatable cuts while the 4 mm cutting width is optimised for narrow parting slots. Reduced chatter translates into fewer re‑works and a more predictable production rhythm, particularly in batch machining where consistent part separation is critical. Built for compatibility and fast set‑up on existing toolposts Specified as an ISO 2525‑type clamping holder and matching the 4C‑L (80–110) shank range, this holder integrates quickly into standard turret toolposts and modular boring bars. The D810TM accepts Korloy MGM‑4 inserts, allowing workshop managers to use a familiar insert family and minimise inventory complexity. Clear labelling of shank and insert standards streamlines tool selection and reduces setup time between jobs, supporting efficient changeovers and reduced machine downtime. Designed to sustain continuous production with safe clamping A dedicated clamping mechanism and a relatively low mass of 0.7 kg provide secure holding without excessive tool overhang; the holder’s maximum parting depth of 20 mm accommodates many common turning tasks while limiting leverage that causes deflection. The maximum cutting diameter of 110 mm and a shaft cut length of 25 mm align the holder’s capabilities to mid‑range lathes and bar‑turning applications, making it a dependable choice for workshops seeking consistency under repetitive loads. Practical benefits explained for production planning Using a purpose‑built parting holder reduces scrap by improving the initial cut and limiting tool breakage. The D810TM’s geometry prioritises chip control and rigidity: the stepping depth and cutting height control how chips form and evacuate, which is especially important on long runs or when machines lack sophisticated chip conveyors. Choosing a holder that matches insert geometry and shank standards enables predictable process planning and easier operator training. For process optimisation and reliable supply from Metav Werkzeuge, order the D810TM parting tool holder or contact our consultants at Metav Werkzeuge for integration guidance — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: D810TM Manufacturer: Teknik Makina ISO designation: 2525 Suitable for inserts manufacturer: Korloy Suitable for inserts type: MGM 4 Numerical data Cutting head width: 25 mm Cutting edge width: 4 mm Cutting height: 45 mm Max cutting diameter: 110 mm Max parting depth: 20 mm Shaft cut length: 25 mm Overall length: 150 mm Diameter: 80 mm Weight: 0.7 kg Special features Left‑hand cutting direction Shank rod designation: 4C‑L (80–110) Designed for grooving and parting applications Compact head for reduced vibration FAQ What insert types fit this holder? The D810TM accepts Korloy MGM‑4 indexable inserts; the holder is configured for those insert geometries and clamping sizes. Is the holder suitable for right‑hand operations? This parting holder is manufactured for a left‑hand cutting direction; a right‑hand variant should be selected for opposite cutting orientation. Which shank sizes are compatible with the D810TM? The shank rod designation is 4C‑L (80–110), matching common turret and bar tool interfaces in that range. What maximum parting depth can be achieved? The holder’s maximum parting or cutting depth is 20 mm, designed for medium‑duty parting tasks. Can this holder be used on small lathes? With a diameter of 80 mm and overall length 150 mm, the holder suits many standard turret setups; ensure toolpost clearance and shank compatibility before fitting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑stability design that combines a 32 mm tool height with a slim 2.45 mm blade for accurate, repeatable parting operations; source the component through Metav Werkzeuge or contact our advisors for specification support. Parting Blade KL25TM — 32 mm height, compatible with GTN 3 inserts (Teknik Makina) The Parting Blade KL25TM is a robust parting and grooving tool designed for precision turning tasks on CNC lathes, built to accept GTN 3 indexable inserts for rapid insert changes and consistent cutting geometry. 32 mm tool height for stable cuts 150 mm overall length for deep reach Compatible with GTN 3 indexable inserts 2.45 mm slim blade for narrow kerfs High stability for repeatable accuracy The tall 32 mm tool profile provides increased rigidity compared with low‑profile holders, reducing deflection and vibration during cut‑off operations. Improved stability translates directly into tighter tolerances and fewer reworks, particularly on slender or long workpieces. By pairing a narrow kerf with a rigid holder, the design helps maintain true parting lines and reduces the risk of chatter that compromises surface finish and concentricity. Reach and engagement that suits demanding setups With an overall length of 150 mm and an effective cutting height of 25 mm, this tool offers the reach required for recessed or long‑overhang operations while preserving a compact footprint at the turret. The extended reach enables access to deeper geometries without resorting to exotic tooling setups, so cycle times remain predictable and tool offsets simple to manage. The combination of reach and profile supports reliable series production on conventional and CNC turning centres. Indexable insert compatibility for fast uptime Compatibility with GTN 3 indexable inserts provides a pragmatic balance between consumable cost and performance: inserts are indexed or replaced rapidly to restore original geometry without complex regrinding. The use of standardised indexable inserts ensures consistent cutting angles and repeatable tool life across batches, simplifying inventory and reducing machine downtime. This approach supports efficient workflows in high‑mix, low‑volume shops as well as in dedicated production lines. Practical benefits for workshop workflows The slim 2.45 mm blade profile is tailored for narrow kerf parting and precision grooving where minimal material waste and close tolerances are essential. The tool's straightforward geometry makes it suitable for quick tool‑change procedures and for applications where surface integrity and dimensional control are priorities. For further technical clarification or to confirm fitment with a specific turret or holder, Metav Werkzeuge provides advisory support from their Emmerich location. For reliable, high‑precision parting choose the Teknik Makina Parting Blade KL25TM — contact Metav Werkzeuge for ordering and detailed application guidance from Emmerich. Technical Data SKU: KL25TM Manufacturer: Teknik Makina Product name: Stechschwerter Compatible inserts: GTN 3 Facts Tool height: 32 mm Overall length: 150 mm Cutting height: 25 mm Blade width: 2.45 mm Special features eCl@ss: 21181018 Suitable for parting and grooving Slim profile for narrow kerfs FAQ Which inserts are compatible with this blade? The Parting Blade KL25TM accepts GTN 3 indexable inserts; the KT‑style insert system provides straightforward indexing or replacement to restore cutting geometry. What are the key dimensions to check for turret fitment? Key dimensions are tool height 32 mm, overall length 150 mm, cutting height 25 mm and blade width 2.45 mm — verify turret clearance and clamping space against these values. Is this tool suitable for deep groove or recessed parting operations? Yes — the 150 mm length and 25 mm cutting height support deeper engagement compared with short holders while maintaining rigidity for stable cuts. How does insert replacement affect uptime? Using standard GTN 3 indexable inserts enables rapid insert changes, reducing downtime and ensuring consistent cutting geometry without complex regrinding procedures. Can this parting blade produce narrow kerfs for minimal material waste? The slim 2.45 mm blade profile is designed for narrow kerf parting, helping to reduce material loss and ease subsequent finishing requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compatibility with GTN 4 indexable inserts, stable 32 mm blade height and a narrow 3.45 mm cutting width for accurate parting operations; order the parting blade directly via Metav Werkzeuge or consult the technical team for application-specific advice. Parting Blade KL26TM — Parting/grooving blade for GTN 4 inserts, 32 mm height (Teknik Makina) A Parting Blade KL26TM engineered for industrial turning applications, offering a rigid profile and narrow cutting geometry for precise grooving and parting with GTN 4 indexable inserts. Compatible with GTN 4 indexable inserts Robust 32 mm blade height for stability Precise 25 mm cutting height capability Narrow 3.45 mm blade width for fine grooves Stable set-up for consistent parting results The parting tool's design delivers a stable mounting platform thanks to its 32 mm blade height and an overall length of 150 mm, which together reduce vibration during cut-off operations. This rigidity translates into consistent surface quality and repeatability when separating components on lathes. For production environments where batch uniformity matters, the rigid profile aids control of cutting forces and helps maintain insert seating, minimising rework and scrap on serial turning tasks. Narrow blade and defined cutting height for accurate grooves A cutting blade width of 3.45 mm combined with a 25 mm cutting height allows for very fine parting and shallow grooving with minimal material removal. The tool is specified for use with GTN 4 indexable inserts, meaning the insert geometry is matched to the blade slot and supports effective chip control and repeatable edge positioning. This configuration benefits operations where material saving and precise tolerances are required, as the narrow kerf reduces waste while the defined cutting height ensures reliable engagement of the insert tip. Easy integration into workshop tooling and process reliability The blade's straightforward geometry makes it suitable for common holders designed for indexable grooving systems, allowing relatively quick changeovers and secure clamping. As a component from Teknik Makina, the blade is intended to form part of a system that supports rapid replacement of inserts and predictable machining results. For production planners, the predictable behaviour of the blade- and-insert combination supports cycle time planning and reduces downtime related to tool trialling or excessive adjustment. For reliable supply and tailored application guidance on Teknik Makina parting blades, contact Metav Werkzeuge to discuss integration into current tooling and to arrange delivery of the KL26TM blade Technical Data Article number: KL26TM Manufacturer: Teknik Makina ECLASS: 21181018 Compatible inserts: GTN 4 Dimensions & core data Blade height: 32 mm Overall length: 150 mm Cutting height: 25 mm Blade width: 3.45 mm Features & compatibility Intended use: parting/grooving in turning Insert type: GTN 4 indexable inserts Story trigger: stechschwert FAQ Which inserts does this blade accept? The Parting Blade KL26TM by Teknik Makina accepts GTN 4 indexable inserts, providing a standardised interface for prompt insert replacement. What are the key dimensions relevant for mounting? The KL26TM parting blade has a 32 mm blade height and 150 mm overall length; these dimensions determine compatibility with common grooving holders and clamping setups. Is the blade suitable for fine parting operations? Yes, the narrow 3.45 mm blade width and 25 mm cutting height make the KL26TM suitable for fine grooves and minimal-kerf parting where material conservation and precision are priorities. Can the parting blade be used in high-volume production? The robust geometry of the Teknik Makina KL26TM supports stable mounting and repeatable results, making it suitable as part of a controlled production process when paired with appropriate holders and GTN 4 inserts. What should be checked before fitting the blade? Confirm holder compatibility for a 32 mm blade height and ensure the clamping system is rated for grooving forces; the KL26TM requires secure seating to achieve the expected accuracy and insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable compatibility, robust dimensions and straightforward handling to maintain consistent parting performance on CNC lathes; order the blade directly via Metav Werkzeuge or consult our specialists for application advice. Parting Blade KL68TM for ZT.D3C Indexable Inserts — 150 mm length, 32 mm height (Teknik Makina) The parting blade KL68TM is a dedicated cut‑off tool designed for precision grooving and parting operations on CNC lathes where ZT.D3C indexable inserts are specified Compatible with ZT.D3C indexable inserts Blade height 32 mm for stable cutting Overall length 150 mm for deep grooving Cutting height 25 mm for accurate parting Consistent cut quality thanks to defined geometry and stiffness The parting blade KL68TM combines a defined profile with the rigidity required to reduce vibration and maintain repeatable results. With an overall length of 150 mm and a blade height of 32 mm, the tool provides a stable support for the insert, which helps to produce a finer surface finish and lower scrap rates. In practical terms, the specified geometry reduces chatter during heavy cuts and supports predictable tool life under standard turning conditions. Quick insert interchange and system compatibility for efficient uptime Designed specifically for the ZT.D3C insert system and compatible with ZCC inserts, the blade simplifies changeovers and inventory management. The use of indexable inserts shortens downtime because only the insert needs replacing when worn, rather than the entire tool. This modular approach contributes to higher machine availability and easier workshop logistics, while the KL68TM’s profile ensures that insert seating and clamping remain secure throughout the machining cycle. Fit for workshop workflows and straightforward stocking strategy The clear dimensional specification—150 mm length and cutting height 25 mm—supports predictable fixture setup and tool offset programming on turning centres. The standardised interface to ZT.D3C inserts eases procurement and spares planning, making the blade suitable for production and jobbing environments alike. Combined with Metav’s central distribution and technical filter for Europe, the KL68TM can be integrated into a lean tooling strategy that values consistency and rapid replenishment. For tailored advice on application or to secure supplies of the KL68TM parting blade from Teknik Makina, contact Metav Werkzeuge for precise guidance and dependable delivery. Technical Data Article number: KL68TM Product: Parting blade Designation: Stechschwerter for ZT.D3C indexable inserts Manufacturer: Teknik Makina Compatible inserts: ZT.D3C Compatible insert manufacturer: ZCC eClass: 21181018 Facts Overall length: 150 mm Blade height: 32 mm Cutting height: 25 mm Special features Compatible with ZT.D3C indexable insert system Label: Stechschwerter ZT.D3C SKU: KL68TM FAQ What insert system does this blade accept? The blade accepts the ZT.D3C indexable insert system and is specified for inserts from ZCC. Which dimensions determine fixture setup for the blade? Fixture setup is mainly guided by the 150 mm overall length, 32 mm blade height and 25 mm cutting height. Can the blade be used for deep grooving applications? Yes, the 150 mm overall length provides reach for deeper grooving and parting operations on standard turning centres. How does the KL68TM support quick maintenance cycles? By using indexable inserts the KL68TM reduces replacement to the worn insert only, supporting faster maintenance and lower downtime. Is the KL68TM suitable for series production environments? The defined geometry and compatibility with ZT.D3C inserts make the KL68TM appropriate for both series production and versatile jobbing requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a coolant-fed, indexable solution that combines secure insert compatibility and a compact 12 mm shank for reliable milling performance; order directly via Metav Werkzeuge or consult the team for application advice. Schaftfräser for LNMX 0402 Indexable Inserts — 12 mm shank, internal coolant (Teknik Makina) A Schaftfräser for LNMX 0402 Indexable Inserts designed as a coolant-fed shank milling cutter for precise, high‑productivity indexable-insert milling in compact toolholders Compatible with LNMX 0402 indexable inserts 12 mm shank for compact toolholders Internal coolant for improved chip evacuation Three cutting edges for efficient material removal Precise, coolant-fed indexable milling for shop floors The Shaft milling cutter delivers a rational approach to indexable milling: by accepting LNMX 0402 inserts and supplying internal coolant, the tool maintains consistent cutting conditions and reduces thermal distortion. The compact 12 mm shank and the cutter's balanced geometry make it suitable for constrained setups where runout tolerance and secure clamping are essential. This construction supports predictable tool life and process stability, helping to keep machining cycles steady and rework rates low. Productivity through geometry and quick insert service With three cutting edges and a 40 mm cutting length, the tool combines material removal efficiency with controlled chip formation. The 150 mm overall length provides reach without excessive overhang, while the indexable system enables rapid insert changes using the specified fasteners. The included Torx fastening specification (M1.8x4.1 screw, T6 key) ensures secure seating of inserts and straightforward maintenance, reducing downtime and enabling fast turnarounds in serial production. Compact handling, repeatable performance Weighing just 0.11 kg, the cutter is easy to handle during setup and contributes to reduced spindle load in smaller CNC machines. Compatibility with Korloy LNMX 0402 inserts offers access to a wide range of grade and geometry options, so the same shank cutter can be adapted across materials and tasks by changing insert grade rather than the whole tool. The result is a flexible, cost‑effective solution for workshops and production cells seeking high repeatability. Serviceability and process integration The indexable design simplifies inventory and tool management: only a small number of insert types are required to cover varied tasks, and internal coolant routing supports cleaner chip evacuation and longer insert life. For procurement and process planning, the cutter’s straightforward specification and Korloy compatibility allow rapid integration into existing tool families. Metav’s European stock and technical advisory help to ensure reliable supply and correct selection for specific machining needs. Contact Metav Werkzeuge today for stock availability, technical matching and ordering of the Teknik Makina shaft milling cutter (SKU S088TM) — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S088TM Product: Shaft milling cutter for LNMX 0402 indexable inserts Manufacturer: Teknik Makina Core dimensions Diameter: 12 mm Shank diameter: 12 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.11 kg Torx screw: M1.8x4.1 Torx key: T6 Features Internal coolant Compatible with Korloy LNMX 0402 inserts Indexable insert system Label: 12 mm shank milling cutter LNMX 0402 L150 mm with internal coolant FAQ Is this cutter compatible with Korloy inserts? The Teknik Makina shaft milling cutter S088TM is compatible with Korloy LNMX 0402 indexable inserts and accepts standard LNMX 0402 geometries. Does the tool provide internal coolant? Yes, the S088TM features internal coolant to improve chip evacuation and thermal control at the cutting zone. What are the main dimensions of the cutter? Shank and diameter: 12 mm; cutting length: 40 mm; overall length: 150 mm. How many cutting edges does the tool have? The cutter uses three cutting edges for a balance of material removal rate and surface regularity. Which fastening components are required for the inserts? Inserts are secured with an M1.8x4.1 Torx screw and a T6 Torx key, as specified for the S088TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 32 mm shank, internal coolant and compatibility with APKT 1003 indexable inserts, this milling body delivers the rigidity and cooling necessary for consistent high-volume machining. Benefit from stable cutting performance and reduced insert wear; order directly via Metav Werkzeuge or contact our consultants for application support. 32 mm shank cutter S181-1TM – for APKT 1003 indexable inserts, internal coolant (Teknik Makina) The 32 mm shank cutter S181-1TM is a robust indexable milling body designed for demanding face and profile milling operations where stability and effective cooling are essential. 32 mm shank diameter Internal coolant supply Compatible with APKT 1003 inserts 4 cutting edges, 45 mm cutting length Stability and rigidity for reliable machining With a 32 mm shank and an overall length of 150 mm, this milling body provides improved torsional stiffness compared with slimmer alternatives. The heavier construction, at 0.916 kg, reduces vibration and supports higher metal removal rates while maintaining surface quality. For production environments where cycle time and repeatability matter, the reinforced design contributes to consistent tool life and predictable part tolerances. Direct cooling and insert compatibility to extend tool life The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, enhancing chip evacuation and thermal control. This targeted cooling helps to preserve edge geometry and extend the life of APKT 1003 indexable inserts, especially under interrupted cuts. Compatibility with Korloy inserts offers flexibility for a wide range of grades and coatings, enabling optimisation for speed, feed and workpiece material. Fast serviceability and shop-floor practicality Designed for efficient indexable insert changes, the tool uses a M2.5x5.5 fixing screw and a T8 Torx key for secure, repeatable clamping. The four-cutting-edge configuration with a 45 mm cutting length balances removal capacity with insert economy, reducing downtime associated with frequent tool changes. The modular nature of the milling body simplifies maintenance and inventory planning in busy workshops. Contact Metav Werkzeuge for tailored machining advice on Teknik Makina tools—call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability, lead times and recommended insert grades Technical data SKU: S181-1TM Product label: 32 mm shank cutter for APKT 1003 L150 mm with internal coolant Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 32 mm Overall length: 150 mm Cutting length: 45 mm Cutting edges: 4 Weight: 0.916 kg Special features / Versions Internal coolant For APKT 1003 indexable inserts Compatible with Korloy inserts Fixing screw: M2.5x5.5 Torx key: T8 FAQ Is this cutter suitable for general-purpose face milling? This shank cutter is designed for face and profile milling tasks; the S181-1TM performs well in general-purpose operations where indexable APKT 1003 inserts are appropriate. Which inserts fit the tool and are any brands recommended? The milling body accepts APKT 1003 indexable inserts and is compatible with Korloy variants; selection of grade and coating should match the workpiece material and cutting conditions. How does internal coolant benefit the cutting process? Internal coolant delivers fluid directly to the cutting edge, improving chip removal and temperature control, which in turn helps to extend insert life and maintain consistent surface finish. What is the cutting length and how does it affect application choice? The tool offers a 45 mm cutting length, balancing material removal capacity with rigidity; it is suitable for operations that require moderate axial engagement without excessive overhang. What tools are needed for insert changes and fastening? Insert clamping uses an M2.5x5.5 screw tightened with a T8 Torx key for secure and repeatable assembly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rapid insert changes, consistent clamping and proven machining geometry for reliable milling cycles — order the tool via Metav Werkzeuge or consult our product specialists for tailored recommendations. Shank Milling Cutter S178TM — 22 mm cutter, 3‑flute, for APXT 1003 indexable inserts (Teknik Makina) The Shank Milling Cutter S178TM is an indexable‑insert milling tool engineered for general machining tasks where quick insert replacement and stable clamping are essential 22 mm cutting diameter 3 cutting edges for balanced cuts 20 mm shank for secure clamping Compatible with APXT 1003 Korloy inserts Faster setup and repeatable results for production runs The Shank Milling Cutter S178TM brings measurable process advantages through an indexable‑insert design that reduces downtime during tool changes. With a 22 mm cutting diameter and 3 cutting edges, the cutter offers stable engagement and predictable chip volumes, which translates into shorter setup times and consistent cycle times on CNC machines. The use of standard inserts means repeatability is driven by insert geometry rather than whole‑tool regrinds, so production batches remain uniform and inspection results more reliable. Secure clamping and mechanical stability for accurate cuts A solid shank profile with a 20 mm diameter and a total length of 150 mm provides rigidity where it matters, reducing deflection under load. The overall mass of 0.36 kg supports controlled dynamics at typical spindle speeds, while the robust clamping system — secured with a Torx M2.5x5.5 screw tightened with a T8 key — ensures the insert seat remains stable during interrupted cuts. These characteristics minimise vibration, protect tool life and preserve workpiece tolerances. Controlled chip flow and flexible machining options The tool’s 60 mm effective cutting length and a 90° cutting angle are configured for a balance between material removal and surface finish. The three‑flute geometry promotes efficient chip evacuation, reducing heat build‑up and enabling a wider window of cutting parameters for mixed workloads. Compatibility with APXT 1003 indexable inserts — supplied by Korloy — allows straightforward selection of grades and coatings to match workpiece requirements without changing the holder. Cost‑effective maintenance and workshop reliability Designed for straightforward insert replacement, the cutter reduces consumable waste and simplifies inventory: only the inserts need regular replenishment, not the entire tool body. The indexable system supports predictable tooling costs and easier tool‑room management, while the choice of established insert sizes keeps sourcing simple. For workshops seeking dependable down‑time reductions, this holder is a pragmatic addition to an existing tooling strategy. For precision milling with Teknik Makina components, contact Metav Werkzeuge for product matching and supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and availability Technical Data Article number: S178TM Brand: Teknik Makina Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 Facts Cutting diameter: 22 mm Shank diameter: 20 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.36 kg Special features Indexable‑insert shank milling cutter Designed for APXT 1003 indexable inserts Secure insert clamping with Torx screw Suitable for quick insert changes and series production FAQ What insert type does this cutter use? The cutter uses APXT 1003 indexable inserts, compatible with common Korloy grades for a range of applications. Is the clamping screw specification included and what key is required? Yes; the holder uses a Torx M2.5x5.5 screw and requires a T8 key for secure tightening. What are the principal dimensions that affect machine setup? Key dimensions are the 22 mm cutting diameter, 20 mm shank diameter and 150 mm overall length; these determine holder clearance and suitable collet or chuck choice. Can the S178TM be used for both roughing and finishing operations? Yes; the three‑flute geometry and 60 mm cutting length allow the S178TM to be applied for heavier material removal as well as for finishing passes when paired with the appropriate APXT 1003 insert grade. Who supplies the S178TM and where can further product details be found? The tool is offered by Teknik Makina and supplied through Metav Werkzeuge; Metav can advise on insert grades, stock and delivery options. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable milling performance with internal coolant and compatibility with BDMT 11T3 indexable inserts ensures consistent chip control and extended tool life. The 20 mm shank and 150 mm overall length deliver the stability and reach required for versatile workshop tasks. Order the end mill directly via Metav Werkzeuge or ask our consultants if needed. End mill for BDMT 11T3 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) The End mill is an indexable-insert cutter designed for industrial milling applications where fast insert changes, coolant-through capability and shank rigidity are required. Internal coolant supply for improved chip evacuation Compatible with BDMT 11T3 inserts (Kyocera) 20 mm shank, 150 mm overall length Three cutting edges for stable material removal Consistent cutting performance with coolant-through design The internal coolant channel keeps the cutting zone flushed, reducing heat and improving chip evacuation for longer insert life and more predictablecycle times. Built with a 20 mm shank, the cutter minimises runout and vibration, which translates into better surface finish and repeatable tolerances when working on batch production. As an indexable-insert solution, the tool accepts BDMT 11T3 inserts, enabling rapid insert rotation or replacement without reclamping the tool body — a clear efficiency advantage in industrial environments. Fast maintenance and secure insert clamping for uptime Three cutting edges deliver a balance between material removal rate and cutting stability, while the screw and key system simplifies maintenance. The clamping uses a Torx T8 key and an M2.5x5.5 screw for reliable insert fixation and simple service routines. Indexable inserts eliminate the need for resharpening; instead, worn edges are replaced in seconds, reducing downtime and keeping the production line moving. This translates into measurable productivity gains for shops that value throughput and predictable tooling costs. Versatile reach and practical handling for workshop applications With a 150 mm overall length and a 50 mm cutting length, this shank cutter provides reach for shoulder milling and contour work without compromising stiffness. The compact mass of 0.351 kg aids in dynamic balance and reduces toolholder stress during high-speed passes. Compatibility with Kyocera BDMT 11T3 inserts permits flexible selection of grades and geometries for aluminium, steel or versatile general-purpose applications, making the cutter suitable for both jobbing shops and production cells that require quick adaptability. For purchase enquiries or a technical specification review, contact Metav Werkzeuge in Emmerich — Metav IndustryLine specialists will advise on insert grades, clamping torque and application fitment; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: S567-1TM Manufacturer: Teknik Makina Product type: End mill for indexable inserts Facts Diameter: 20 mm Overall length: 150 mm Weight: 0.351 kg Shank diameter: 20 mm Cutting length: 50 mm Cutting edges: 3 eClass: 21180806 Special features Internal coolant: yes Compatible inserts: BDMT 11T3 Insert manufacturer: Kyocera Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this cutter? The cutter accepts BDMT 11T3 indexable inserts; compatible grades from Kyocera can be selected depending on the workpiece material and required surface finish. Is the tool coolant-through? Yes, the end mill is equipped with internal coolant supply for enhanced chip control and thermal management at the cutting edge. What is the shank diameter and overall length? The tool has a 20 mm shank and a 150 mm overall length, providing a good balance of stiffness and reach for general milling tasks. How many cutting edges does it have and what does that mean for productivity? The cutter features three cutting edges, which combine reliable material removal with stable cutting forces; this supports higher feed rates while maintaining surface quality. Which screw and key are required for insert clamping? Insert clamping uses an M2.5x5.5 screw tightened with a Torx T8 key for secure and repeatable fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of compatibility with BDMT 11T3 indexable inserts, a 20 mm shank for stable clamping and a 50 mm cutting length for deeper engagement — all designed to keep production consistent and efficient; order via Metav Werkzeuge or consult our specialists for configuration advice. Teknik Makina S567TM End mill — 20 mm shank, 50 mm cutting length (for BDMT 11T3 indexable inserts) The S567TM end mill is a shank cutter engineered for indexable turning inserts, intended for stable milling and reliable setup in CNC and milling centres across metalworking workshops. 20 mm shank diameter for secure clamping 50 mm cutting length for deeper passes Compatible with BDMT 11T3 indexable inserts (Kyocera) Consistent performance with indexable inserts for productive machining This shank cutter places emphasis on repeatable results by accepting BDMT 11T3 indexable inserts, which simplify insert changes and reduce downtime. The combination of a 20 mm shank and a balanced tool length gives a stable toolholder interface that minimises chatter and vibration. For operations where cycle time matters, the use of indexable inserts allows maintenance of cutting performance without full tool replacement, supporting continuous production and predictable component quality. Stability and process reliability on the shop floor Designed for robust machining, the tool’s 50 mm cutting length and three cutting edges deliver an efficient material removal rate while maintaining surface integrity. The 90° cutting geometry provides reliable face engagement and consistent shoulder finishes. These characteristics translate directly into process advantages: fewer interruptions for regrinding, shortened set-up times and improved repeatability across batches — elements that contribute to lower unit costs and higher throughput in series production. Simple clamping and secure assembly for fast maintenance Assembly and maintenance are straightforward thanks to the supplied fastening system: a Torx screw (M2.5x5.5) secured with a T8 key ensures a firm and precise seat for each insert. The standardised fastening reduces the risk of incorrect torque and supports consistent tool life. Quick insert changes and predictable torque requirements help maintain machine uptime and make the cutter suitable for workshops aiming to streamline tool management without complex procedures. Application scope and material guidance The cutter is intended for use with BDMT 11T3 indexable inserts and is specified as compatible with Kyocera insert geometries, making it suitable for a broad range of roughing and semi-finishing tasks on typical engineering materials. The combination of shank diameter, cutting length and three-edge insert support lends itself to tasks where stability and controlled chip removal are priorities. For specific feed and speed recommendations, consult tooling data for the chosen insert grade to match the material and machining strategy. For reliable production results with the Teknik Makina S567TM and tailored advice from Metav Werkzeuge, contact our consultants in Emmerich for configuration and supply guidance. Technical Data SKU: S567TM Manufacturer: Teknik Makina Product: End mill for BDMT 11T3 indexable inserts Compatible inserts: BDMT 11T3 Compatible insert manufacturer: Kyocera Torx screw: M2,5x5,5 Torx key: T8 Core dimensions Shank diameter: 20 mm Cutting length: 50 mm Overall length: 150 mm Diameter: 20 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.351 kg Features For BDMT 11T3 indexable inserts Compatible with Kyocera inserts Torx screw fastening M2.5x5.5 Torx key size T8 Shank-type end mill configuration FAQ Which inserts fit this cutter? The cutter accepts BDMT 11T3 indexable inserts; it is specified as compatible with Kyocera geometries for that insert designation. What are the key dimensions to check for machine setup? Key dimensions are the 20 mm shank diameter, 50 mm cutting length and 150 mm overall length which determine clamping requirements and reach. How many cutting edges does the tool support and what is the cutting angle? The tool is configured for three cutting edges and a 90° cutting angle providing stable engagement and predictable finishing on shoulders. What fastening hardware is required for insert mounting? Insert retention uses a Torx screw (M2.5x5.5) tightened with a T8 key to secure each insert correctly. Is this tool suitable for heavy roughing passes? The tool’s shank and cutting length deliver good stability for heavier passes when combined with appropriate insert grades and machine rigidity, enabling efficient roughing strategies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust compatibility with BLMP 0603 indexable inserts, reliable internal coolant and a compact 21 mm cutting diameter for consistent milling performance. The stable 20 mm shank and straightforward clamping system reduce vibration and downtime. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter for BLMP 0603 indexable inserts — Teknik Makina, 21 mm, internal coolant A Teknik Makina shank milling cutter designed for precision milling with BLMP 0603 indexable inserts, offering through‑coolant capability for improved chip evacuation and longer insert life. Compact 21 mm cutting diameter Integrated internal coolant supply Compatible with Taegutec BLMP 0603 inserts 20 mm shank for stable clamping Precision milling with fewer interruptions The shank milling cutter combines a compact 21 mm diameter with a replaceable insert system to deliver repeatable results in series machining. Using BLMP 0603 indexable inserts means that cutting edges can be changed quickly without regrinding the body, which lowers cycle-time losses and keeps machines productive. The internal coolant channel supplies lubricant directly to the insert seat, supporting better chip control and potentially extending insert life; this is particularly advantageous in continuous production where consistent surface finish and reduced rework are priorities. Stable toolholding for improved surface quality A generous 20 mm shank and a 150 mm overall length provide the rigidity needed for accurate side‑milling operations. The cutter features 3 cutting edges, a balance that optimises material removal while maintaining a good surface finish. Fast and secure insert clamping uses a Torx T8 key and M3x6,2 screws, ensuring predictable torque and minimised risk of loosening under load. The compact mass (0.348 kg) keeps centrifugal forces low, which helps to reduce chatter and improves dimensional stability on long runs. Built for workshop and production environments Designed to accept standard BLMP 0603 inserts and to work with inserts from Taegutec, this cutter is suitable for a wide range of milling tasks where indexable tooling is preferred for economic reasons. Its configuration supports efficient tool management: fewer full‑body replacements, fast insert changes and compatibility with widely available insert grades. For procurement and planning, the tool is listed as S479-5TM, making it straightforward to identify within stock systems and tooling lists. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina shank milling cutter S479-5TM with existing tool holders and production processes — local stock and technical consultancy are available from our Emmerich location. Technical Data SKU: S479-5TM Manufacturer: Teknik Makina ECLASS: 21180806 Facts Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length: 40 mm Weight: 0.348 kg Number of cutting edges: 3 Torx key: T8 Torx screw: M3x6,2 Special features Internal coolant For BLMP 0603 indexable inserts Compatible with Taegutec inserts Label: 21mm Schaftfräser BLMP 0603 L150mm mit Innenkühlung Product type: Shank milling cutter FAQ Which inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; compatibility with Taegutec insert grades is specified for the S479-5TM. Is there a coolant provision? Yes — the tool includes an internal coolant channel that delivers fluid to the insert seat for improved chip evacuation. What clamping hardware is required for inserts? Insert clamping uses Torx screws M3x6,2 tightened with a Torx T8 key; this provides consistent clamping for the BLMP 0603 inserts. Which shank holders are suitable? The 20 mm shank fits standard 20 mm collets and tool holders designed for shank milling cutters; ensure the holder provides appropriate runout and clamping force. How many cutting edges does the tool have and what is the benefit? The tool has three cutting edges, a compromise that supports steady material removal rates while helping to maintain a good surface finish on workpieces. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of internal coolant and proven indexable insert compatibility for consistent small-diameter milling. The combination of stable shank geometry, a 17 mm cutter diameter and secure Torx clamping ensures reliable repeatability in batch work; order directly via Metav Werkzeuge or consult our specialists for application support. Shank milling cutter S672-1TM – 17 mm, internal coolant, for LNMU 0303 indexable inserts (Teknik Makina) Shank milling cutter S672-1TM is an indexable insert milling solution designed for precise finishing and efficient material removal with LNMU 0303 inserts, featuring an internal coolant channel to improve chip evacuation and tool life. Internal coolant for stable cutting Compatible with LNMU 0303 inserts 17 mm cutter diameter, 16 mm shank High cooling efficiency and insert compatibility for longer tool life The combination of an internal coolant channel and support for LNMU 0303 indexable inserts reduces heat at the cutting edge and improves chip control, which in turn extends insert life and stabilises surface quality. Indexable inserts make it possible to replace only the cutting tip rather than the complete cutter, lowering running costs and shortening machine downtimes. The design is also Tungaloy compatible, ensuring broad availability of cutting grades and geometries for different machining tasks. Stable geometry and secure clamping for consistent performance A compact geometry with a 17 mm diameter and a 16 mm shank provides rigidity in small-diameter milling, while a 40 mm cutting length and 150 mm overall length balance accessibility and stability. The tool has two cutting edges, optimised for even load distribution and efficient chip removal. Assembly is secured with a Torx T8 key and M2.5x7 Torx screw, ensuring repeatable clamping torque and minimising the risk of loosening during operation. The light weight (0.241 kg) aids handling without compromising stiffness. Practical advantages for workshop productivity and supply reliability Designed for routine production and maintenance environments, the shank cutter supports fast insert changes and predictable process behaviour, helping to reduce cycle-time variability. With Metav’s supply chain from Emmerich, access to replacement inserts and tool variants is straightforward, backed by decades of distribution experience. The cutter’s simple interface and standardised clamping mean fewer special tools are required, which reduces inventory complexity and supports a consistent production flow. Contact Metav Werkzeuge for tailored recommendations on Teknik Makina shank milling cutters and compatibility with Tungaloy LNMU 0303 inserts; our specialists in Emmerich provide application guidance and supply assurance Technical data SKU: S672-1TM Product: Shank milling cutter Manufacturer: Teknik Makina Facts Cutter diameter: 17 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length: 40 mm Cutting edges: 2 Weight: 0.241 kg Special features Internal coolant Compatible with LNMU 0303 indexable inserts Suitable for Tungaloy inserts Torx key T8 for assembly Torx screw M2.5x7 FAQ Which insert type fits this cutter? The cutter accepts LNMU 0303 indexable inserts; the S672-1TM is specified for that insert family and supports common grades from suppliers such as Tungaloy. Is the cutter supplied with the fastening screw and key? The S672-1TM uses an M2.5x7 Torx screw and a T8 Torx interface for secure clamping; check the delivery contents at purchase for included assembly items. Does the tool have through-coolant capability? Yes, the shank milling cutter features internal coolant, which directs cutting fluid towards the insert zone to improve cooling and chip control. What applications suit this shank cutter? The cutter is intended for indexable-insert milling tasks where compact diameter and reliable insert changes are priorities; it is well suited to both finishing and light roughing operations. Which manufacturer produces this tool and who is responsible for supply? This milling cutter is produced by Teknik Makina (Teknik Cutting Tools) and supplied in Europe through Metav Werkzeuge; refer to SKU S672-1TM for ordering and compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, a 10 mm shank and compatibility with LNMX 0402 indexable inserts for efficient chip control and reduced tool-change downtime; order the cutter directly via Metav Werkzeuge or consult our specialists for application matching. 10 mm Shank End Mill S086TM — for LNMX 0402 indexable inserts, internal coolant (Teknik Makina) The 10 mm Shank End Mill S086TM is a compact milling tool engineered for use with LNMX 0402 indexable inserts, offering internal coolant supply for improved heat control and consistent cutting performance in production and workshop environments. 10 mm shank for compact holders Internal coolant for efficient chip evacuation Compatible with LNMX 0402 Korloy inserts 150 mm overall length for deeper reach Higher throughput through targeted cooling and geometry The S086TM combines a 10 mm shank with an integrated internal coolant feed and a cutting length of 40 mm, which together support stable cutting conditions and prolonged insert life. The internal coolant channel directs lubricant and coolant precisely to the cutting zone, reducing thermal load and improving chip evacuation. With two cutting edges, the tool balances radial cutting forces and surface finish, making it a pragmatic choice where cycle-time improvements and predictable tool life are required. The compact shank design also helps to minimise vibration in shorter overhangs, enhancing process reliability. Minimise downtime with standardised inserts and fast clamping Designed for LNMX 0402 indexable inserts, compatible with Korloy grades, this cutter simplifies inventory and changeover. Indexable inserts allow swift replacement without full tool regrinding, which reduces machine downtime and lowers total machining cost per component. The standardised insert format supports a broad choice of grades and geometries for finishing or semi-finishing operations, giving flexibility across small-batch runs and repetitive production alike. Compatibility with commonly available inserts makes aftermarket sourcing straightforward and cost-effective. Practical design for secure fixing and serviceability The cutter features a clear clamping solution with a Torx fastening system: Torx T6 key and a screw specification M1,8x4,1. This arrangement ensures precise seating of each LNMX 0402 insert and easy repeatable tightening torque, supporting consistent cutting conditions from insert to insert. The tool’s 150 mm overall length provides reach where required while the modest mass (0.07 kg) keeps handling simple during tool changes. The internal coolant channel also reduces the need for external coolant adjustments, supporting cleaner setups and simpler maintenance routines. Integration into workshop workflows and selection advice With a 10 mm shank diameter, the cutter fits standard 10 mm tool holders, enabling quick integration into existing tooling systems. The combination of internal coolant and indexable inserts makes the tool particularly suitable for medium-duty slotting and peripheral milling where controllable chip flow and short set-up times matter. For optimal results, pair the cutter with insert grades recommended for the intended material and ensure the coolant pressure and delivery are configured to reach the tool’s internal feed. The SKU S086TM simplifies reorders and internal logging when standardising tooling across multiple machines. Contact Metav Werkzeuge for technical matching and immediate availability of the S086TM end mill; our specialists in Emmerich will advise on insert grades, holder selection and delivery – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: S086TM Product type: End mill (shank cutter) Manufacturer: Teknik Makina Compatible inserts: LNMX 0402 (Korloy) Internal coolant: Yes Torx key: T6 Torx screw: M1,8x4,1 Facts Shank diameter: 10 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.07 kg eCl@ss: 21180806 Special features Internal coolant feed Compatible with LNMX 0402 Korloy inserts Torx T6 fastening system Compact 10 mm shank for standard holders FAQ Which inserts fit this cutter? The S086TM is designed for LNMX 0402 indexable inserts; the cutter is specified for inserts from Korloy and other suppliers offering the LNMX 0402 format. Does the tool provide through-coolant capability? Yes, the S086TM features internal coolant to deliver coolant directly to the cutting edge, improving chip evacuation and thermal control during milling. What holder size is required for the cutter? The cutter has a 10 mm shank and is intended for standard 10 mm tool holders; the compact shank supports straightforward integration into existing tooling systems. How are the inserts fastened and serviced? Inserts are secured with a Torx screw (M1,8x4,1) tightened using a Torx T6 key, allowing repeatable clamping and quick insert changes for reduced uptime. What is the overall length and cutting length of the tool? The S086TM has a 150 mm overall length and a 40 mm cutting length, providing reach for deeper cuts while maintaining rigidity for stable milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 25 mm shank and internal coolant to achieve stable, high‑productivity milling with LNMX 1004 indexable inserts; the combination of a rigid 25 mm body and three cutting edges promotes consistent surface quality and longer tool life. Order the shank cutter directly via Metav Werkzeuge or ask our consultants if needed. Indexable shank cutter S093TM by Teknik Makina — 25 mm shank, internal coolant A robust shank milling cutter S093TM designed for machining with LNMX 1004 indexable inserts and optimised for through‑coolant operations. 25 mm shank diameter for stable clamping Internal coolant supply for improved tool life Compatible with LNMX 1004 Korloy indexable inserts Three cutting edges for efficient material removal Greater rigidity for consistent cuts and higher metal removal rates The solid 25 mm shank and compact overall length deliver improved rigidity, reducing chatter during heavy milling passes. With three cutting edges and a 70 mm cutting length, the tool balances material removal rate and surface finish, which helps maintain part tolerances in repetitive production. This configuration is particularly effective where stable clamping and predictable tool behaviour are priorities, resulting in fewer reworks and more predictable cycle times. Through‑coolant design reduces heat and eases chip control An integrated internal coolant channel directs cutting fluid to the cutting zone, improving chip evacuation and reducing thermal load on the insert seats. The result is slower wear on insert rims and extended intervals between index changes. Fixing is secured with an M4x10 screw tightened with a T15 Torx key, simplifying maintenance and insert replacement while keeping downtime to a minimum. These features contribute to reliable tool life and lower process variation in longer shifts. Compatibility that simplifies tooling and inventory management Designed to accept LNMX 1004 indexable inserts from Korloy, this tool body fits established insert inventories and thread standards, helping to reduce the number of unique tooling items stored. The standardised screw size and Torx interface support rapid insert changes and straightforward service routines. Clear identification with SKU S093TM supports traceability across tool lists and tool‑management systems, aiding purchasing and production planning. Choose Teknik Cutting Tools’ S093TM shank cutter for reliable indexable milling — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich. Technical Data SKU: S093TM Product type: Shank cutter For inserts: LNMX 1004 Compatible insert manufacturer: Korloy Manufacturer: Teknik Makina Facts Shank diameter: 25 mm Overall length: 150 mm Cutting length: 70 mm Weight: 0.46 kg Cutting edges: 3 Screw: M4x10 Torx key: T15 ECLASS: 21180806 Special features Internal coolant Compatible with LNMX 1004 indexable inserts Three cutting edges SKU identification S093TM Torx T15 screw interface FAQ Which insert type fits this cutter? The cutter is designed for LNMX 1004 indexable inserts; compatibility is specified for Korloy inserts and the body accepts that insert form for reliable seating. Is the tool equipped for through‑coolant machining? Yes, the tool body features internal coolant, which enhances chip evacuation and reduces thermal stress at the cutting edge. What fastening hardware is required for insert installation? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is used for tightening and replacement. How many cutting edges does the cutter have and what is the cutting length? The tool has three cutting edges and a cutting length of 70 mm, offering a balance between material removal and surface quality. What is the product identification for orders and tool lists? Please refer to SKU S093TM when ordering or recording the tool in management systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High rigidity, precise insert compatibility and a compact profile make this cutter a reliable choice for demanding milling operations; the 26 mm diameter and 25 mm shank ensure stable clamping and consistent results. Combine the compatibility with LOGU 0303 indexable inserts and the four cutting edges for efficient material removal. Order the S681TM directly via Metav Werkzeuge or consult our specialists for tailored technical advice. Shank milling cutter S681TM — 26 mm diameter, for LOGU 0303 indexable inserts (Teknik Makina) Shank milling cutter S681TM optimised for reliable slotting and face operations with LOGU 0303 indexable inserts in industrial machining environments 26 mm cutting diameter Compatible with LOGU 0303 inserts Shank Ø 25 mm for secure clamping Four cutting edges for smooth finish Total length 150 mm for deeper reach Consistent rigidity and repeatable accuracy for production work The S681TM cutter is designed to deliver consistent rigidity thanks to its 25 mm shank and balanced geometry, which reduces vibration and improves surface quality. A rigid shank diameter combined with the tool’s length-to-diameter ratio supports repeatable positioning in the spindle and helps to maintain tool life under continuous use. For workshops aiming to increase first-pass yield, this stability translates into fewer reworks and a steadier output. Insert system and serviceability that reduce downtime Using the LOGU 0303 indexable inserts allows fast edge changes without regrinding, minimising setup time. The cutter accepts inserts from Kyocera, ensuring broad availability of grades and geometries for different materials. The clamping arrangement and the Torx fixture details facilitate quick replacement of the cutting edges; this modular approach simplifies tool management in mixed-production environments and supports rapid turnaround between batches. Practical performance details and application fit With four cutting edges and a 150 mm overall length, the tool balances cutting capacity and reach for common milling tasks. The 60 mm cutting length supports shoulder and light slotting operations while the cutter’s geometry is suited to general milling of steel and non-ferrous alloys where indexable inserts are preferred. Weight and dimensions contribute to ease of handling and safe insertion in toolholders, while the standard Torx connections ensure compatibility with common fasteners used in industrial toolrooms. Contact Metav Werkzeuge for delivery options, technical matching and to discuss the Teknik Makina S681TM shank milling cutter with LOGU 0303 compatibility Technical data SKU: S681TM Label: 26 mm shank milling cutter for LOGU 0303, L150 mm Product type: Shank milling cutter Manufacturer: Teknik Makina Facts Cutting diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.359 kg Torx key: T8 Torx screw: M3x7 eClass: 21180806 Special features Designed for LOGU 0303 indexable inserts Compatible with Kyocera insert manufacturers Four cutting edges for stable material removal Shank design for secure clamping and repeatability FAQ Which inserts fit this cutter? The S681TM from Teknik Makina is designed for LOGU 0303 indexable inserts and is compatible with Kyocera-manufactured LOGU 0303 grades. What are the key dimensional requirements for the toolholder? A toolholder able to accept a 25 mm shank and accommodate a 150 mm overall length is required for correct mounting of the S681TM. What operations is this cutter best suited to? This shank milling cutter is suited to face milling and light slotting where indexable inserts are preferred for quick edge changes and consistent finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 20 mm shank and internal coolant to improve stability and tool life in demanding milling operations; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Shaft milling cutter S678-1TM – 20 mm shank, internal coolant (Teknik Makina) Shaft milling cutter S678-1TM designed for indexable machining using LOGU 0303 inserts, ideal for slotting and face milling in production and workshop environments 20 mm shank diameter Internal coolant supply Compatible with LOGU 0303 inserts Three cutting edges for stable machining Higher productivity through secure clamping and stable geometry The tool combines a 20 mm shank with a compact overall length to deliver rigid machining even under moderate radial loads. This geometry reduces vibration and improves surface finish when compared with less rigid cutters, translating into higher feed rates or longer insert life. With its three cutting edges, the cutter provides a balanced cutting action that reduces chatter and supports consistent material removal, making it suitable for repeatable operations in small-batch and serial production. Controlled cooling for longer insert life and better chips evacuation An integrated internal coolant channel directs lubricant precisely to the cutting zone, assisting with heat dissipation and chip control. Delivering coolant close to the cutting edge lowers thermal load on the insert, which helps maintain edge integrity and extend service intervals. The holder accepts LOGU 0303 indexable inserts (Kyocera-compatible), enabling quick insert replacement without regrinding and reducing downtime in the workshop. Practical design for fast tool changes and predictable results A defined 60 mm cutting length and an overall length of 150 mm provide a useful reach while keeping tool overhang manageable for stable results. Insert clamping uses an M3x7 screw with Torx T8 drive for secure seating and straightforward maintenance. At roughly 0.356 kg, the assembly is easy to handle on the bench or in tool racks. For operations that prioritise uptime and reproducible quality, this indexable cutter offers a low-maintenance alternative to solid tools while keeping machining economics under control. For reliable indexable milling with internal coolant, contact Metav Werkzeuge to discuss the Teknik Makina shaft milling cutter S678-1TM and ensure the tool matches the intended application Technical data Article number: S678-1TM Manufacturer: Teknik Makina Product type: Shaft milling cutter Label: 20 mm shaft milling cutter LOGU 0303 L150 mm with internal coolant Core specifications Diameter: 20 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 60 mm Number of cutting edges: 3 Weight: 0.356 kg Torx screw: M3x7 Torx key: T8 Internal coolant: yes ECLASS: 21180806 Materials & compatibility Compatible with LOGU 0303 indexable inserts Insert manufacturer compatibility: Kyocera Indexable insert mounting M3x7 (Torx T8) Designed for slotting and face milling applications FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; the tool holder is compatible with Kyocera-style LOGU 0303 inserts for fast replacement. Is internal coolant routed through the shank? Yes, the tool features internal coolant delivery to the cutting zone to aid heat control and chip evacuation. What is the shank and overall length of the tool? The holder has a 20 mm shank and an overall length of 150 mm with a 60 mm cutting length. How are the inserts secured? Inserts are clamped with an M3x7 screw driven by a Torx T8, ensuring secure seating and straightforward maintenance. Is this cutter suitable for production workshops? The cutter is designed for repeatable milling tasks in both workshop and small production settings, offering a balance of rigidity, coolant control and quick insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 32 mm shank and quick-change APKT 1705 compatibility to reduce cycle times and maintain consistent surface quality. Order the shaft milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Shaft Milling Cutter S662TM — 32 mm shank, for APKT 1705 indexable inserts (Teknik Makina) Shaft Milling Cutter S662TM provides a robust holder for indexable machining, designed for secure clamping and reliable repeatability in production environments 32 mm shank for high rigidity Compatible with APKT 1705 indexable inserts Three cutting edges for balanced cutting M4x10 Torx screw and T15 key included Stable clamping for predictable production results The holder's 32 mm shank and overall length of 150 mm deliver the rigidity required for repeatable machining. A rigid tool body reduces vibration and tool deflection, which in turn preserves cutting-edge geometry and extends insert life. The tool's mass (approximately 0.85 kg) helps dampen chatter in medium-duty applications, so runout and surface finish remain consistent across batches. These attributes support higher process reliability and lower scrap rates in series production. Fast insert changes and secure fastening minimise downtime Designed for APKT 1705 indexable inserts, the tool uses a standard M4x10 Torx screw and T15 key for insert clamping. The use of indexable inserts allows economical replacement of cutting edges without removing the holder from the spindle, shortening maintenance intervals and reducing tooling costs. The secure Torx clamping ensures a stable connection between insert and holder, improving positional repeatability and maintaining cutting geometry under varying loads. Balanced cutting performance for smooth chip flow With three cutting edges and a 60 mm cutting length specified for the shank, the design provides an even load distribution and reliable chip evacuation during interrupted or continuous cuts. The cutter geometry supports a steady material removal rate and helps achieve a uniform surface texture. For production managers, this means fewer adjustments during machining and a predictable finishing step downstream. Practical documentation and traceability for workshop use The article is listed as SKU S662TM, with technical files available (see the product documentation identifiers). Compatibility with Taegutec inserts is indicated, simplifying procurement and inventory management when standardising insert types across machines. Technical advisers are available to discuss successful integration of this tool into existing toolposts and to recommend insert grades based on the specific machining strategy. For purchase or technical consultation related to Teknik Makina tools, contact Metav Werkzeuge for reliable supply and application support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S662TM Manufacturer: Teknik Makina Product type: Shaft milling cutter Compatible inserts: APKT 1705 indexable inserts Compatible insert manufacturer: Taegutec Documentation IDs: 62de7ee633927e49dbf32790, 62de7e5233927e49dbf3274b Core data Shank diameter: 32 mm Cutting length (shank): 60 mm Diameter: 32 mm Number of cutting edges: 3 Overall length: 150 mm Weight: 0.85 kg Design / Special features Torx screw: M4x10 Torx key: T15 Indexable insert system: APKT 1705 Suitable for use with Taegutec APKT 1705 inserts FAQ Which insert type is required for this cutter? The Shaft Milling Cutter S662TM is designed for APKT 1705 indexable inserts and is specified to work with inserts from Taegutec. Are the clamping screw and key supplied with the tool? Product data for S662TM lists an M4x10 Torx screw and a T15 Torx key; these items are documented as part of the tool specification. What are the main dimensions to consider when planning tool setup? Important dimensions for the S662TM are a 32 mm shank diameter, 150 mm overall length and a 60 mm cutting length, as listed in the technical data. How many cutting edges does the cutter have and what is the benefit? The S662TM uses three cutting edges, which provides balanced cutting forces and improved chip flow for smoother operation and consistent surface finish. What is the catalogue reference for ordering or stock checks? Refer to SKU S662TM when enquiring or ordering this shaft milling cutter from Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tool that combines a Ø32 mm shank and 50 mm cutting length for efficient, deeper milling passes; its compatibility with LNMX 1510 indexable inserts and Korloy plates ensures rapid tool changes and consistent results — order directly via Metav Werkzeuge or consult the Metav team for application advice S362TM Shank Cutter — indexable insert cutter, Ø32 mm, 2 cutting edges — Teknik Makina A Shank cutter S362TM designed for use with LNMX 1510 indexable inserts, offering a robust solution for precision milling and fast insert replacement in production and repair environments Diameter 32 mm shank Two cutting edges for efficient cutting 50 mm cutting length for deeper passes Compatible with LNMX 1510 Korloy inserts High material removal rate with controlled tool behaviour The S362TM is engineered to deliver a stable cutting process thanks to its two cutting edges and a balanced geometry that reduces vibration during operation. With a Ø32 mm shank and a 50 mm cutting length, the tool enables deeper passes while maintaining surface quality; the 90° cutting angle gives predictable engagement, which supports consistent cycle times and measurable productivity gains on batch work. These attributes translate into fewer tool changes and a reliable machining rhythm on the shop floor. Fast insert changes and straightforward assembly Assembly and maintenance follow a rational approach: the cutter is secured with a Torx M4x12.5 screw and requires a T15 key, ensuring quick, repeatable clamping of LNMX 1510 indexable inserts. Compatibility with Korloy inserts simplifies stocking and procurement, because one insert family covers multiple cutters. The result is reduced setup time and improved line uptime — a practical advantage for production environments that value tool-change speed and inventory consistency. Designed for everyday workshop robustness With a total length of 150 mm and a mass of 0.885 kg, the cutter combines manoeuvrability with stability, making it suitable for both bench-top milling machines and more rigid CNC centres. The shank design supports secure clamping while the insert system allows partial regrinding strategies and simple plate replacement to extend usable tool life. Supplied as a complete shank cutter ready for LNMX 1510 plates, the tool supports efficient workflows and predictable maintenance intervals, which contributes to overall process reliability and cost control. For tailored machining recommendations, availability and delivery options from Metav Werkzeuge, contact our specialists at Metav Werkzeuge for professional advice and local stock information Technical Data Article number: S362TM Manufacturer: Teknik Makina Product name: Shank cutter for LNMX 1510 indexable inserts Brand: Teknik Makina Facts Diameter: 32 mm Total length: 150 mm Cutting length: 50 mm Number of cutting edges: 2 Weight: 0.885 kg Special features Compatible with LNMX 1510 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x12,5 Torx key size: T15 Cutting angle: 90° FAQ Which inserts fit this cutter? The cutter accepts LNMX 1510 indexable inserts; it is compatible with Korloy plates for standard insert availability. What is the shank diameter and total length? The tool has a shank diameter of 32 mm and a total length of 150 mm, designed for secure clamping and stable machining. How many cutting edges does the shank cutter have? The S362TM is fitted with two cutting edges to balance cutting efficiency and surface finish. Which screw and key are required for insert clamping? Insert clamping uses a Torx M4x12.5 screw secured with a T15 key for quick and repeatable assembly. Is the cutter suitable for deeper passes? The 50 mm cutting length supports deeper passes and reduced tool change frequency while maintaining control over chip evacuation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 32 mm shank stability, internal coolant, and compatibility with WNMX 09T3 Korloy inserts to maintain steady production and reduced tool-change times; order the cutter directly via Metav Werkzeuge or consult our sales engineers for application guidance. 32 mm indexable milling cutter S805-1TM for WNMX 09T3 inserts, internal coolant (Teknik Makina) A robust 32 mm milling cutter designed as an indexable insert body for WNMX 09T3 inserts, providing internal coolant delivery for reliable machining cycles in demanding workshop and production environments. 32 mm shank diameter for stable clamping Internal coolant for reliable chip evacuation Compatible with WNMX 09T3 Korloy inserts 150 mm overall length, 70 mm cutting length Drive consistent performance with secure clamping and coolant The S805-1TM is built around a 32 mm shank, giving a rigid connection to the spindle and reducing vibration during heavy cuts; this stability translates into better surface finishes and longer insert life. With a 70 mm cutting length and a compact overall length of 150 mm, the tool balances reach and stiffness, making it suitable for a wide range of milling setups. The inclusion of internal coolant delivers fluid directly to the cutting edge, improving chip evacuation and cooling the cutting zone, which helps to maintain consistent cutting conditions and reduces the risk of thermal damage to inserts. Quick insert changes and predictable maintenance cycles Designed for WNMX 09T3 indexable inserts, compatibility with Korloy grades simplifies logistics and ensures access to proven insert geometries. The clamping system uses a M3x7 Torx screw with Torx T8 key interface for secure fixing and swift replacement, so maintenance is straightforward and repeatable. With 3 cutting edges, the cutter offers an efficient balance between material removal rate and indexable insert economy; fewer interruptions for tool changes mean higher net uptime and lower unit production costs. Integration with shop workflows and dependable handling At just 0.841 kg, the cutter body is convenient to handle while robust enough for industrial use. The design suits both batch and continuous production, allowing straightforward changeover on milling centres that accept 32 mm shanks. Its straightforward geometry and proven clamping concept minimise setup time and help maintain process reliability. For purchasers seeking supply-chain confidence, the tooling is available through established distribution channels that prioritise availability and consistent quality, supporting predictable production planning and stock management. For reliable internal coolant performance and Korloy compatibility, contact Metav Werkzeuge to discuss the Teknik Makina S805-1TM milling cutter and confirm the optimal insert grades and machine setup for your application. Technical data Article number: S805-1TM Manufacturer: Teknik Makina Product type: Milling cutter (shank cutter) Label: 32mm Schaftfräser WNMX 09T3 L150mm mit Innenkühlung Facts Shank diameter: 32 mm Overall length: 150 mm Cutting length (shank/insert zone): 70 mm Weight: 0.841 kg Cutting edges: 3 ECLASS: 21180806 Special features Internal coolant: yes Compatible inserts: WNMX 09T3 (Korloy) Torx screw: M3x7 Torx key: T8 SKU: S805-1TM UID: S805-1TM Category path: Zerspanen › Schaftfräser FAQ Which insert type fits this cutter body? The cutter body accepts WNMX 09T3 indexable inserts; Korloy inserts in this geometry are compatible and commonly used with the S805-1TM. Is internal coolant supported and how does it help? Yes — the tool features internal coolant, which directs coolant to the cutting edge to enhance chip evacuation and thermal control, improving insert life and process stability. What are the shank and overall dimensions? Shank diameter is 32 mm, the overall length is 150 mm and the cutting length is 70 mm, offering a balance between reach and rigidity. How are the inserts secured and which key is required? Inserts are fastened with an M3x7 Torx screw; a Torx T8 key is used for secure and repeatable clamping. Can this cutter be used across different machine platforms? The 32 mm shank and standard clamping concept make the cutter suitable for milling centres and machining centres that accept this shank size; machine-specific adapters or holders may be required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable parting operations benefit from the 150 mm overall length, 22 mm maximum cutting depth and compatibility with DCEN 300 indexable inserts for consistent cycle times and stable chip control. Order the Parting Clamp Holder D745TM directly via Metav Werkzeuge or ask our consultants if needed. Parting Clamp Holder DCEN 300 L150mm — Right-hand parting tool holder with standard ISO clamp A Parting Clamp Holder for DCEN 300 indexable inserts designed to secure small-profile inserts for turning and parting operations in industrial lathe applications. Right-hand configuration for standard turning 150 mm overall length for deep reaches 3 mm cutting width for narrow grooves Compatible with ISCAR DCEN 300 inserts Consistent clamping for repeatable finishes The holder’s secure clamping design reduces micro-movement during cut-off and groove operations, which improves repeatability and part quality. Compatibility with DCEN 300 indexable inserts ensures commonly available tooling can be used, simplifying tool supply chains. The ISO-style designation provides a standardised seating that helps maintain concentricity and reduces the risk of insert misalignment, resulting in fewer tool changes and more predictable cycle times. Geometry that balances reach and stiffness With a 150 mm overall length and a compact 25 x 25 mm cross-section the toolholder is engineered to reach deeper profiles while retaining stiffness sufficient for precision work. The 22 mm maximum cutting depth and 3 mm cutting width allow narrow grooves and reliable parting without excessive overhang. These dimensional choices help to optimise the balance between access to the workpiece and vibration resistance, supporting higher process stability on bar-fed and chuck-mounted turning operations. Simple, robust fastening and compatibility Clamping is effected using a 3 mm Allen key interface, enabling quick set-up and secure fixation of the insert seat. The holder conforms to the ISO 2525 clamping approach, facilitating integration into existing tool turrets and reducing set-up time. Proven ISCAR compatibility for DCEN 300 inserts widens the choice of grades and geometries, making it easier to match insert selection to material and cutting conditions without bespoke tooling. Designed for industrial production environments The right-hand cutting direction and compact mass make the toolholder suitable for repeated parting and grooving cycles in production-focused workshops. At 0.755 kg the holder is light enough for reduced inertia while remaining substantial enough to damp minor vibrations. The overall design emphasises productivity and uptime: standardised mounting, familiar insert types and a straightforward clamping method combine to lower process variability and keep cycle times tight. Contact Metav Werkzeuge for tailored advice on the Teknik Cutting Tools D745TM parting clamp holder and fast supply from Emmerich. Technical data Article number: D745TM Product type: Parting clamp holder Manufacturer: Teknik Makina ECLASS: 21181005 Facts Overall length: 150 mm Weight: 0.755 kg Holder width: 25 mm Holder height: 25 mm Cutting head width: 25 mm Maximum cutting depth: 22 mm Cutting width: 3 mm Allen key size: 3 mm ISO designation: 2525 Special features Compatible with DCEN 300 indexable inserts Compatible with ISCAR inserts Right-hand cutting direction Standardised ISO 2525 clamp seating Compact, stiff 25 × 25 mm cross section FAQ Which inserts fit this holder? The holder accepts DCEN 300 indexable inserts; the D745TM is specified for standard DCEN 300 geometries and is compatible with ISCAR-manufactured inserts. Is the toolholder right- or left-hand? This parting clamp holder is a right-hand configuration suitable for right-hand cutting operations. What is the maximum cutting depth? The maximum cutting depth for the toolholder is 22 mm, allowing reliable narrow-groove and parting operations. What are the overall dimensions of the holder? Overall length is 150 mm with a 25 mm width and 25 mm height; the cutting head width is also 25 mm. Which key is required for clamping? Clamping and adjustment use a 3 mm Allen key for the fastening screw. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of secure clamping, internal coolant and a 16 mm shank ensures stable, high‑precision boring with reduced vibration and improved tool life. Order the boring bar directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Boring Bar A12-16M for CCMT 0602 Indexable Inserts — 16 mm shank, internal coolant (Teknik Makina) The Boring Bar A12-16M for CCMT 0602 Indexable Inserts is a left‑hand cutting tool designed for precision turning and boring operations where secure insert clamping and coolant supply are required Internal coolant for reliable chip evacuation 16 mm shank for secure clamping Compatible with CCMT 0602 indexable inserts Left‑hand cutting for specialised turning tasks Stable cutting performance through rigid shank design The solid 16 mm shank and the A12‑16M mounting form a compact, vibration‑resistant assembly that contributes directly to repeatable bore quality. A stiffer toolholder reduces chatter and helps maintain concentricity when machining tight tolerances, which is particularly important in serial production and finish turning. The modest mass of the component also assists rapid tool changes and keeps spindle load predictable during high‑precision cycles. Longer tool life and better surfaces with internal coolant Integrated internal coolant delivers lubricant and cooling directly to the cutting zone, lowering temperatures and improving chip control. This targeted coolant supply reduces thermal expansion of the cutting edge and workpiece, which in turn helps achieve a consistent surface finish. In practice, internal feed minimises built‑up edge and extends insert life, making the system more economical over many machining hours while maintaining process stability. Quick insert changes and reliable fastening Compatibility with CCMT 0602 indexable inserts simplifies tool inventory and replacement. The clamp geometry with an 8.9 mm clamping head width and a cutting height of 42 mm provides secure seating for the insert; fastening is achieved with a Torx screw M2.5x5.5 operated by a T8 key for straightforward servicing. The accessible screw layout shortens maintenance time and reduces downtime in workshop workflows. Application focus: left‑hand cutting and machining reach Designed for left‑hand cutting, the bar suits operations where the cutting feed is from right to left, for example certain internal turning or specialised setups. The 150 mm overall length offers sufficient reach for many internal machining tasks while maintaining rigidity. A 95° cutting angle supports stable engagement of the insert, enabling consistent chip formation and controlled material removal rates in routine production environments. For consistent, vibration‑reduced boring in left‑hand turning applications, order the Teknik Makina A12‑16M through Metav Werkzeuge — contact our Emmerich team for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA509TM Model: A12-16M Name: Boring bar for CCMT 0602 indexable inserts Core technical data Shank diameter: 16 mm Overall length: 150 mm Cutting height: 42 mm Clamping head width: 8.9 mm Weight: 0.195 kg Cutting direction: left Special features Internal coolant Compatible with CCMT 0602 inserts Torx screw M2.5x5.5, Torx key T8 Cutting angle: 95° FAQ What inserts fit this boring bar? The A12‑16M boring bar is compatible with CCMT 0602 indexable inserts, enabling use of commonly stocked grades for finish and semi‑finish turning. Is the coolant supply internal or external? This tool features internal coolant, which feeds lubricant directly to the cutting zone for improved chip evacuation and extended insert life. Which direction does the tool cut? The bar is configured for left‑hand cutting, suitable for operations where the tool must cut from right to left. What fastening hardware is used for the insert? Insert retention is via a Torx screw M2.5x5.5, serviced with a T8 Torx key for secure, repeatable clamping. What are the dimensions relevant to clamping and reach? Key dimensions are a 16 mm shank, 150 mm overall length, 42 mm cutting height and 8.9 mm clamping head width, balancing reach with rigidity. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of precise fitment and secure clamping: the 16 mm shank with a 150 mm overall length and a 95° cutting angle delivers stable internal turning and predictable tool life. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar S12-16M – 16 mm shank, for CCMT 0602 indexable inserts (Teknik Makina) A boring bar S12-16M designed for internal turning with CCMT 0602 indexable inserts, offering a compact 150 mm overall length and right-hand cutting for reliable workshop use *Boring bar S12-16M for CCMT 0602 inserts *16 mm shank diameter, 150 mm overall length *Right-hand cutting with 95° cutting angle *Torx T8 screw M2.5x5.5; weight 0.195 kg Precision and compatibility for internal turning The combination of a 16 mm shank and compatibility with CCMT 0602 indexable inserts ensures a standardised solution for internal turning operations where repeatability matters. The compact 150 mm overall length reduces overhang and vibration, which supports consistent bore geometry and improved surface finish. For CNC and bench setups alike, the standard interface minimises changeover time and simplifies tool inventory management. Secure clamping and serviceable insert mounting A robust fastening arrangement with a Torx T8 drive and screw M2.5x5.5 provides reliable insert retention and straightforward replacement during maintenance. The clamping head width of 8.9 mm and a cutting height of 42 mm are balanced to secure the insert while allowing sufficient rake and clearance for most turning tasks. The ISO shank designation S12-16M signals compatibility with common toolholders and supports quick, repeatable mounting in modular tool systems. Geometry tuned for efficient metal removal The 95° cutting angle and right-hand cutting direction are selected to favour stable cutting forces and predictable chip flow in bore machining. The tool’s modest mass at 0.195 kg helps reduce centrifugal loads during high-speed rotations, which can translate to less chatter and longer insert life. These characteristics contribute to efficient material removal while preserving the integrity of the workpiece. Practical handling and workshop integration Labeled under SKU K296TM, this bar from Teknik Makina offers a compact footprint and straightforward handling for production and maintenance teams. The design supports quick insert swaps and low downtime, which is especially valuable in small-batch machining or setups with frequent tool changes. Compatibility with industry-standard CCMT inserts keeps stocking requirements lean and supports predictable procurement. For application advice on the Teknik Makina boring bar S12-16M (SKU K296TM) and to arrange supply from Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and delivery options Technical data SKU: K296TM Manufacturer: Teknik Makina Product type: Boring bar Designation: S12-16M Core technical data Diameter: 16 mm Shank diameter: 16 mm Overall length: 150 mm Cutting height: 42 mm Clamping head width: 8.9 mm Weight: 0.195 kg Cutting angle: 95° Special features Compatible with CCMT 0602 indexable inserts Right-hand cutting Torx screw: T8, M2.5x5.5 Label: 16mm Bohrstange CCMT 0602 L150mm FAQ Which inserts fit this boring bar? The bar is designed for CCMT 0602 indexable inserts; the geometry and clamping dimensions match that insert form. What is the shank standard of the tool? The shank is designated S12-16M, which indicates the standardised shank geometry for secure mounting. Which cutting direction does the tool use? This tool is configured for right-hand cutting with a 95° cutting angle for stable internal turning. How is the insert fixed to the bar? Insert retention uses a Torx T8 screw (M2.5x5.5), enabling secure and serviceable fastening. What is the product SKU for ordering and stock purposes? The SKU for ordering is K296TM, listed under Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid, coolant-fed design plus compatibility with common indexable inserts for reliable chip control and consistent surface finish; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed Boring bar KE31TM — SDUC boring bar with internal coolant, solid carbide (Teknik Makina) The Boring bar KE31TM is a right-hand SDUC tool with integrated coolant delivery, designed for precision turning and boring with indexable inserts in metalworking environments Solid carbide body for high rigidity Internal coolant supply for effective cooling Accepts DCMT 0702 indexable inserts Ø16 mm diameter, 150 mm overall length Greater rigidity for improved surface quality Manufactured from solid carbide, this holder provides a stiff, vibration-resistant platform that supports repeatable results in precision turning. The combination of a Ø16 mm cutting diameter and a 150 mm overall length reduces deflection compared with less rigid solutions, which helps to maintain consistent tolerances and a finer surface finish. For operations where dimensional accuracy matters, the higher stiffness directly translates into fewer rejects and reduced rework, improving part throughput and predictable process capability. Coolant-fed design for longer tool life and cleaner chips The integrated internal coolant channel feeds cutting fluid directly to the cutting edge, cooling the insert and flushing chips away from the cutting zone. This targeted coolant delivery reduces thermal load on the cutting edge and improves chip breaking when paired with DCMT 0702 indexable inserts, extending insert life and maintaining cutting performance over longer cycles. The bar presents a shank Ø12 mm interface for secure clamping, ensuring the coolant path is aligned and effective under typical workshop conditions. Workshop-ready details that simplify setup Practical features minimise downtime: the insert is secured with a Torx screw (T8) sized M2.5x5.5, and the tool offers a cutting height 9 mm for straightforward insert alignment. The assembly is intended for right-hand cutting, and the component carries the ISO designation E12M SDUCR 07, which aids identification and tool planning. The lightweight construction (approx. 0.1 kg) eases handling during set-up and tool changes, while the compatibility with standard indexable inserts keeps inventory simple and reduces the variety of spares required. For precision turning with assured coolant delivery choose the Teknik Makina KE31TM — contact Metav Werkzeuge in Emmerich for technical advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: KE31TM Manufacturer: Teknik Makina ISO designation: E12M SDUCR 07 Material: solid carbide Diameter: 16 mm Overall length: 150 mm Shank diameter: 12 mm Weight: 0.1 kg Cutting direction: right Internal coolant: yes Compatible inserts: DCMT 0702 Cutting height: 9 mm Torx key: T8 Torx screw: M2.5x5.5 Core data Ø: 16 mm Length: 150 mm Shank Ø: 12 mm Weight: 0.1 kg Cutting height: 9 mm Special features Solid carbide construction Internal coolant channel DCMT 0702 insert compatibility ISO: E12M SDUCR 07 Right-hand cutting Torx fastening system T8 / M2.5x5.5 FAQ Which inserts are compatible with this boring bar? The bar is designed for DCMT 0702 indexable inserts; pairing these inserts with the internal coolant channel supports effective chip control and tool life. Does the tool provide internal coolant supply? Yes, the KE31TM features an internal coolant channel that delivers cutting fluid directly to the insert seat to reduce heat and improve chip evacuation. What shank size is required for mounting? The holder uses a shank Ø12 mm interface for clamping; this dimension is important when selecting toolholders or adaptors. Is the boring bar suitable for finishing operations? With its solid carbide construction and stiff Ø16 profile, the holder is well suited to precision finishing and light to medium turning tasks where reduced vibration is needed. How is the insert secured in the holder? The insert is fastened using a Torx screw (T8) of size M2.5x5.5, providing a reliable clamping method for repeatable positioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com