Gibt es einen Hahn und Kolb Online Shop?

Take advantage of precise parting and stable clamping thanks to the combination of a narrow 3.45 mm blade, a 32 mm shank height and a 150 mm overall length for consistent workshop results. Order the KL61TM directly via Metav Werkzeuge or ask the consultants for tailored advice. Parting Tool Blade KL61TM — narrow 3.45 mm blade, 150 mm length (Teknik Makina) The Parting Tool Blade KL61TM is a lathe parting blade designed for fine grooving and parting operations, compatible with Sandvik insert type 123 4C and intended for secure toolholder clamping in industrial and job-shop environments Narrow 3.45 mm blade for fine parting 150 mm overall length for deep cuts 32 mm shank height for stable clamping Achieve repeatable, high-precision cuts with a narrow profile The narrow 3.45 mm cutting edge supports precise parting and minimal material loss, which is especially valuable when workpiece economy and finish quality matter. The slim profile reduces cutting forces, helping to avoid chatter during thin-part separation. By combining the narrow blade with a defined cutting height 25 mm, the arrangement delivers a predictable tool geometry; this in turn simplifies setup tolerances and reduces scrap rates. The description emphasises precision and consistent results, making it suitable for demanding production runs where repeatability is essential. Stable clamping for longer tool life and better surface finish A 32 mm shank height and the 150 mm overall length create a robust interface with standard holders, increasing resistance to bending and vibration. Improved rigidity means inserts seat more securely, which reduces micro-movement at the cutting edge and extends insert life. The KL61TM’s compatibility with Sandvik-compatible inserts (designation 123 4C) ensures that the replaceable cutting part can be renewed quickly without reworking the holder, maintaining productivity and lowering life-cycle costs. Stable clamping also improves surface integrity, reducing the need for downstream finishing. Practical workshop integration and handling benefits The blade’s standardised dimensions support straightforward inventory management and quick replacement cycles. The narrow blade geometry is optimised for parting and grooving cycles commonly found on turning centres and manual lathes, allowing easy integration into existing toolholder systems that accept the specified shank height and blade length. Where tight tolerances and repeatable groove widths are required, this component functions as a reliable solution that minimises setup time and simplifies process documentation for quality control. Simple maintenance, clear compatibility and proven supply chain Maintenance is reduced by using standard insert types and a robust blade body that resists deformation under normal lathe conditions. The KL61TM suits operations that prioritise uptime: insert swaps restore cutting performance without complex reconditioning of the holder. Compatibility with recognized insert formats ensures access to replacement cutting edges from established manufacturers, while central supply via Metav Werkzeuge guarantees consistent availability and quality screening for the European market. Contact Metav Werkzeuge for a specification check and secure supply of the KL61TM parting blade from Emmerich — specialists can confirm fitment and advise on the ideal insert pairing for the application Technical data Article number: KL61TM Manufacturer: Teknik Makina Numbers / core technical data Shank height: 32 mm Overall length: 150 mm Cutting height: 25 mm Blade width: 3.45 mm Designs / special features Compatible with Sandvik insert type 123 4C Intended for parting and grooving operations Narrow blade profile for reduced material loss FAQ What insert types fit this blade? The KL61TM is compatible with Sandvik insert type 123 4C; the blade is designed to accept that specific insert geometry for reliable seating and cutting performance. Which machines is the blade suitable for? This parting blade is intended for lathes and turning centres that accept a 32 mm shank height and a 150 mm overall length, providing stable clamping in standard toolholders. How does the blade improve surface finish? The narrow 3.45 mm profile and rigid shank reduce vibration and cutting forces, which helps produce a cleaner parting plane and prolongs insert life with fewer reworks. Can the blade be used with other insert brands? The KL61TM is specified for Sandvik-compatible insert type 123 4C; other manufacturers’ inserts that match that designation may also fit, but verification of seat geometry is recommended. How quickly can the blade be replaced in a production setting? Insert replacement is straightforward thanks to the standardised geometry; the blade body itself can be exchanged as part of normal tool-change procedures to minimise downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from reliable, high-precision parting thanks to the combination of a 32 mm blade height and a slender 3.45 mm cutting width for minimal material loss; compatible with MGMN 400 indexable inserts and engineered for stable clamping—order the parting blade directly via Metav Werkzeuge or consult our specialists for application advice. Parting Blade KL32TM — 32 mm height, 3.45 mm cutting width (Teknik Makina) The Parting Blade KL32TM is a lathe parting tool blade designed for precise separation and grooving operations in industrial turning, suitable for holders that accept MGMN 400 type indexable inserts. 32 mm blade height for deep parting 3.45 mm narrow cutting width for fine separation Compatible with MGMN 400 indexable inserts Max holder parting depth 36 mm Consistent, measurable precision for parting operations The KL32TM delivers consistent geometry for demanding parting tasks: the 32 mm blade height provides sufficient engagement for most holder systems while the 3.45 mm blade width minimises material removal and reduces cycle time. This slim profile supports narrow kerf cuts with lower cutting forces, which in turn reduces spindle load and stabilises chip control. The combination of these dimensions enables repeatable, high-quality separation and helps to avoid rework in serial production. Broad compatibility with indexable inserts and clamping systems Engineered for flexibility, the blade accepts MGMN 400 indexable inserts and is compatible with Korloy-manufactured inserts, allowing a range of grades and geometries to be used depending on the application. With a maximum holder parting depth of 36 mm, the blade suits deeper parting operations while retaining secure clamping. The result is a versatile tool solution that integrates into existing tooling setups with minimal adaptation and improves tool-change efficiency. Operational benefits: reach, cutting height and material handling An overall length of 150 mm gives extended reach for larger diameters or deeper grooves, while the effective cutting height of 25 mm defines the usable cutting zone for reliable insert engagement. The design supports fine separation on a variety of turned components and reduces the risk of workpiece distortion thanks to conservative material removal per pass. Paired with the right insert grade, the blade is suitable for production environments where surface integrity and cycle stability matter most. Contact Metav Werkzeuge for tailored application support or to request the Teknik Makina KL32TM parting blade for your turning operations—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery from Emmerich Technical data SKU: KL32TM Manufacturer: Teknik Makina Product: Parting blades ECLASS: 21181018 Facts Blade height: 32 mm Cutting height: 25 mm Blade width: 3.45 mm Overall length: 150 mm Max holder parting depth: 36 mm Special features Compatible inserts: MGMN 400 Compatible insert maker: Korloy UID: KL32TM FAQ What materials can this parting blade be used for? The KL32TM parting blade is intended for general lathe parting and grooving where MGMN 400 inserts are suitable; material suitability depends on the chosen Korloy insert grade. How does the 3.45 mm blade width affect chip formation? A 3.45 mm kerf typically generates narrow chips and lower cutting forces compared with wider blades, improving chip evacuation and reducing the risk of workpiece deflection when using the KL32TM. Is the blade compatible with other insert manufacturers? The blade is specified for MGMN 400 style inserts and is proven compatible with Korloy inserts; other manufacturers’ inserts of the same geometry may fit but should be verified for seat and tolerance match. What does the 25 mm cutting height mean in practice? The 25 mm cutting height indicates the effective vertical cutting zone available for the insert; it determines the maximum section of the insert that can engage the workpiece during parting. Can this blade be used for deep parting applications? With a maximum holder parting depth of 36 mm and a blade height of 32 mm, the KL32TM supports deeper parting tasks within the limits of the holder and machine rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, a narrow kerf and straightforward insert compatibility for stable, repeatable parting operations—benefits that reduce set-up time and scrap. Order the parting blade directly via Metav Werkzeuge or consult the specialists for application matching and supply. Parting blade KL56TM — 25 mm cutting height, 150 mm blade length by Teknik Cutting Tools Parting blade KL56TM is a purpose-made tool blade for indexable-insert parting and grooving operations in turning applications, designed to accept standard Sandvik inserts for fast changeovers Compatible with Sandvik N151-3 inserts Blade height 32 mm for secure clamping Cutting height 25 mm for accurate grooves Blade length 150 mm for extended reach Deliver consistent parting performance with engineered rigidity The KL56TM is engineered to combine a rigid support profile with a slim cutting kerf, balancing stability and minimal material removal. The height 32 mm contributes to secure clamping in standard holders, while the blade width 2.45 mm keeps the kerf narrow to reduce cutting forces and part distortion. For production environments where repeatability matters, this configuration supports reliable cycle times and reduced scrap rates. The specification is aimed at turning tasks where controlled chip formation and precise separation are required. Faster tool changes through indexable-insert compatibility Compatibility with Sandvik N151-3 indexable inserts simplifies inventory and changeover routines. Using standard insert geometry allows the adoption of proven insert grades and chipformer designs, which shortens downtime during replacements and grade changes. The modular approach of insert-mounted parting tools enables consistent cutting performance across shifts, and supports predictable tool-life planning when paired with appropriate insert grades and cutting parameters. Dimensions tuned for stability and precision Key measurements are selected to support a wide range of lathe setups: cutting height 25 mm aligns the blade with common holder standards, and the length 150 mm provides reach for deep grooves or operations with clearance requirements. These dimensions help maintain a stable cutting axis and reduce vibration when properly clamped, which in turn improves surface finish and dimensional control. Where fine groove accuracy is a priority, the blade width 2.45 mm minimises material waste while ensuring sufficient edge support. Practical supply and workshop advantages Sourcing this tool through a specialist distributor streamlines procurement and ensures traceable quality. Metav combines broad stock depth with industry-focused advice, helping workshops standardise tooling and reduce the number of suppliers. The result is a dependable supply chain and pragmatic purchasing: reliable delivery from a European distribution hub, plus access to technical guidance for selecting inserts and holders that match the production task. For compatibility checks or procurement advice on the Teknik Cutting Tools parting blade KL56TM, contact Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: KL56TM Manufacturer: Teknik Makina eClass: 21181018 Facts Blade height: 32 mm Cutting height: 25 mm Blade width: 2.45 mm Blade length: 150 mm Special features Compatible with Sandvik inserts (N151-3) Designed for indexable-insert parting SKU KL56TM FAQ Which insert type fits this blade? The KL56TM parting blade is compatible with Sandvik indexable inserts of the type N151-3 for standard insert-mounted parting applications. What are the blade's critical dimensions? Critical dimensions for the KL56TM are: blade height 32 mm, cutting height 25 mm, blade width 2.45 mm and blade length 150 mm. Is the KL56TM suitable for quick tool changes in production? Yes, the indexable-insert design and Sandvik N151-3 compatibility make the KL56TM well suited to rapid insert changes and predictable maintenance intervals. How does the blade geometry affect parting quality? The combination of a narrow kerf (2.45 mm) and secure clamping height (32 mm) in the KL56TM reduces vibration and encourages stable chip formation, supporting improved dimensional consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid design that delivers precise parting operations: a narrow 3.45 mm blade width and 25 mm effective cutting height combine to reduce material waste and ensure consistent component separation. The blade’s 32 mm overall height and 150 mm length offer stability in turning setups. Order the parting blade directly via Metav Werkzeuge or consult our specialists for fitment advice. Parting Blade KL58TM – 32 mm blade height, compatible with Sandvik inserts (Teknik Makina) The Parting Blade KL58TM is a robust parting and grooving blade engineered for precise turning and cut-off tasks in industrial workshops Compatible with Sandvik N151-4 inserts 32 mm sturdy blade height 25 mm effective cutting height 3.45 mm narrow blade width Consistent, accurate parting for production-critical turning A narrow-profile parting blade minimises waste and reduces the risk of chatter during cut-off operations. With a 3.45 mm blade width and 25 mm cutting height, this blade is designed to deliver repeatable separation performance on turned components. The reduced kerf helps preserve material while the 150 mm overall length gives sufficient engagement in standard toolholders. Precision in cut-off tasks translates directly into fewer rejected parts and less rework, improving throughput and lowering unit costs. Fast compatibility and straightforward changeovers in the toolroom Designed to work with established insert systems, the KL58TM accepts Sandvik N151-4 inserts, enabling rapid changeover and straightforward stocking of spare parts. Compatibility with a major insert range simplifies logistics and reduces downtime during maintenance. The blade’s geometry supports secure clamping in standard holders and promotes stable chip formation for many turning applications. For workshops upgrading their tooling, this configuration offers a practical route to higher operational efficiency without complex tooling changes. Reliability and workshop-grade quality from a trusted partner Manufactured by Teknik Makina, this parting blade combines a pragmatic design with robust dimensions — 32 mm height and 150 mm length — for dependable performance in everyday workshop use. Metav’s quality filter and logistical footprint in Emmerich ensure consistent supply and quality checks for every shipment. The combination of industry-compatible inserts, rigid blade geometry and clear dimensional data makes this component a dependable choice for professional machinists seeking both precision and reliability. Contact Metav Werkzeuge for tailored advice on Teknik Cutting Tools parting blades and to confirm fitment with existing toolholders; our Emmerich team will provide fast, expert guidance. Technical Data SKU: KL58TM Manufacturer: Teknik Makina Suitable for inserts: Sandvik N151-4 Product type: Parting blade eClass: 21181018 Facts Blade height: 32 mm Cutting height: 25 mm Blade width: 3.45 mm Length: 150 mm Special features Compatible with Sandvik N151-4 inserts Designed for parting and grooving operations Practical length for standard turning setups FAQ Is this blade compatible with Sandvik inserts? Yes. The KL58TM parting blade by Teknik Makina is compatible with Sandvik N151-4 inserts, allowing straightforward insert changes. What are the key dimensions to check for holder fitment? Check the blade height of 32 mm, cutting height of 25 mm and the 3.45 mm blade width to ensure compatibility with the clamping and insert geometry of the toolholder. Can the blade be used for both parting and grooving? Yes. The KL58TM is intended for parting and light grooving operations where a narrow kerf and precise cutting height are required. What benefits does the narrow blade width provide? A 3.45 mm width reduces material removal per cut, helps limit scrap, and can improve surface finish in many parting applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise grooving with a compact, rigid toolholder that combines a 25 x 25 mm shank profile, a 2 mm cutting width and compatibility with ISCAR 2C DGN indexable inserts for repeatable parting operations — order or request advice via Metav Werkzeuge for fast integration into production. Grooving clamping holder D729TM — left-hand grooving holder, 25 x 25 mm A Grooving clamping holder D729TM engineered for accurate parting and narrow-groove machining in production and jobbing environments, compatible with 2C DGN indexable inserts. Left-hand cutting direction 25 x 25 mm shank profile 2 mm cutting width for narrow grooves Compatible with ISCAR 2C DGN inserts Achieve precise, repeatable grooves with a compact profile The holder’s compact 25 x 25 mm shank and rigid clamping geometry deliver precision and reduced vibration during cut-off and grooving cycles. With a narrow 2 mm cutting width the toolholder enables fine slotting and parting tasks where material loss must be minimised; the firm clamp and measured clamping surface help maintain cutting edge position so cycle-to-cycle repeatability is improved. The left-hand orientation of the cutting edge is integrated into the body design to suit machines configured for left-hand grooving operations. Stable design that supports consistent productivity At an overall length of 150 mm and weighing 0.712 kg, this toolholder balances accessibility and stiffness for controlled engagement. The device accepts common indexable inserts, specified for ISCAR as 2C DGN, and carries the ISO 2525 designation for straightforward identification in tooling lists. A maximum grooving depth of 19 mm is available when using the appropriate insert geometry, allowing for both through-grooving and deeper scoring tasks without sacrificing stability. The balanced mass and geometry contribute to predictable cutting forces and longer insert life under comparable operating conditions. Integrates cleanly into workshop toolroom workflows The holder is designed for mounting with the 2C-L DGN interface, enabling quick replacement and alignment within established tool families and reducing set-up time on the toolpost or turret. Its compact footprint helps keep adjacent tools accessible and simplifies toolpath planning for close-tolerance operations. For production planners and shop-floor supervisors, the combination of compatibility, compactness and measurable depth capability supports streamlined tool inventories and smoother changeovers, while the clear specification makes procurement and documentation straightforward. Contact Metav Werkzeuge in Emmerich for a tailored tooling recommendation or technical quotation — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: D729TM Manufacturer: Teknik Makina Compatible inserts: 2C DGN (ISCAR) ISO designation: 2525 Cutting direction: left Numbers / Core technical data Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting width: 2 mm Maximum grooving depth: 19 mm Weight: 0.712 kg Designs / Special features Mounting interface: 2C-L DGN Left-hand grooving orientation Designed for indexable insert clamping Compact shank for tight tool layouts FAQ Which inserts fit this holder? The holder accepts 2C DGN indexable inserts; compatibility with ISCAR 2C DGN is specified for the D729TM grooving clamping holder by Teknik Makina. Is the cutting direction left or right? This toolholder is configured for left-hand cutting direction and should be installed accordingly on the machine turret or toolpost. What is the maximum grooving depth? The maximum recommended grooving depth for the holder is 19 mm, subject to insert geometry and machine capability. Which tool interface is required to mount the holder? Mounting uses the 2C-L DGN interface, enabling integration with matching borescoped or clamping toolbars and reducing set-up time. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise clamping and simple insert compatibility for efficient right‑hand parting operations; the robust 25 mm section and 18 mm maximum cutting depth deliver repeatable results in standard lathe work. Order the parting tool holder directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Parting Tool Holder D717TM – right‑hand holder with 25 mm clamping section A Parting Tool Holder D717TM designed for right‑hand parting and grooving tasks on conventional and CNC lathes, compatible with 2C TD indexable inserts Right‑hand parting configuration 25 mm robust clamping section Compatible with 2C TD inserts Max cutting depth 18 mm Consistent parting accuracy for production runs The holder is engineered for precision clamping, delivering reliable alignment thanks to its uniform 25 mm section. With a 2 mm cutting width and a 25 mm head profile, the design reduces lateral deflection during engagement, which helps to maintain edge life on indexable inserts and reduces scrap rates. For everyday workshop and small‑batch production, the stable interface between toolholder and insert supports predictable cutting results and easier process control. Compact footprint to suit standard tool posts A total length of 150 mm and a squared 25 mm shank make the tool compatible with common tool posts and turrets without elaborate modification. The compact geometry shortens overhang, improving rigidity and allowing operators to position the holder closer to the workpiece. This geometry contributes to steadier cutting conditions and improves chip control for typical parting and grooving cycles on lathes. Fast insert changes and reduced setup time Built for the 2C TD insert form and listed as compatible with Taegutec inserts, the holder follows established ISO designation 2525, which simplifies procurement and stocking. The 2C‑R TD shank designation aligns the clamping interface with widely used insert formats, enabling rapid replacement and minimal downtime. Standardised compatibility supports consistent tool exchange procedures and straightforward inventory handling on the shop floor. Robust construction for repeatable performance Weighing 0.728 kg, the holder combines compact dimensions with a feel of mass that dampens vibration during cut‑off operations. The 18 mm max cutting depth indicates capacity for substantial parting operations within its design limits, while the right‑hand orientation is optimised for standard lathe feed directions. The overall package emphasises repeatability and steadiness rather than experimental overreach, making it a dependable choice for routine metalcutting tasks. For precise right‑hand parting operations, contact Metav Werkzeuge to discuss the Teknik Makina Parting Tool Holder D717TM and suitable 2C TD inserts for the intended material and machine setup Technical Data Article number: D717TM Manufacturer: Teknik Makina ISO designation: 2525 Compatible inserts: 2C TD (Taegutec) Core data Clamping height: 25 mm Head width: 25 mm Shank width: 25 mm Cutting width: 2 mm Max cutting depth: 18 mm Overall length: 150 mm Weight: 0.728 kg Cutting direction: right Special features Shank designation: 2C‑R TD Suitable for right‑hand parting operations Standardised insert compatibility to reduce set‑up time FAQ Which inserts fit this holder? The holder accepts 2C TD indexable inserts; it is listed as compatible with Taegutec 2C TD types for straightforward procurement. What is the maximum cutting depth? Maximum cutting depth is 18 mm, which defines the practical limit for single‑pass parting with stable clamping. Is the toolholder for right‑hand or left‑hand cutting? This model is configured for right‑hand cutting direction, suited to standard lathe feed orientations. What are the key dimensions to check before mounting? Key dimensions include a 25 mm clamping height, 25 mm head and shank width, 2 mm cutting width and 150 mm overall length; weight is 0.728 kg. Can this holder be used reliably for repeated parting work? With its robust 25 mm section and standardised insert compatibility, the holder provides a repeatable interface suitable for routine parting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid design with a 25 x 25 mm shank and a 2 mm cutting width to achieve precise, productive parting and grooving operations; order the tool via Metav Werkzeuge or consult our advisors for application guidance. Parting tool holder D756TM — 25 x 25 mm shank, 2 mm cutting width The parting tool holder D756TM is a right‑hand, indexable insert holder designed for short-run parting and grooving in conventional turning applications 25 x 25 mm shank for stable clamping Compatible with ISCAR 2C DGN inserts 2 mm nominal cutting width for narrow grooves 19 mm maximum plunge depth for deep parting Stable shank for consistent parting results The holder features a 25 x 25 mm shank, delivering the rigidity required for repeatable parting and grooving. A square shank of this size reduces vibration when used on lathes with standard tool posts, which in turn improves surface quality and tool life. The 150 mm overall length gives a compact setup that is easy to position in confined turret spaces. Designed for right‑hand cutting, the geometry supports standard lathe feed directions and helps maintain consistent chip evacuation. Secure clamping for indexable inserts and predictable performance Clamping is engineered for indexable inserts in the 2C DGN family, with an ISO designation 2525 that matches common insert pocket dimensions. The holder accommodates ISCAR‑compatible plates, ensuring a broad choice of chipbreaker styles and grades. The tight clamping interface and optimised pocket alignment keep the insert seated during plunge cuts; the result is dependable repeatability and simpler insert indexing, reducing downtime and consumable costs. Narrow kerf and deep plunging for controlled material separation With a 2 mm cutting width, this tool is aimed at narrow‑kerf parting and precise grooving where material conservation and minimal workpiece disturbance are priorities. The 19 mm maximum plunge depth allows for deeper separations without changing to a larger holder, useful for components with thicker cross‑sections. Operators benefit from a predictable cutting profile and reduced risk of workpiece pull‑out when combined with appropriate insert grade and lathe settings. Workshop integration and application guidance The holder’s compatibility with established insert formats simplifies procurement and inventory: the same 2C DGN inserts used across other parting systems can be stocked for multiple holders. For turning centres and manual lathes alike, pairing the holder with a matched insert grade for the workpiece material will optimise cycle time and tool life. If uncertainty exists about insert selection or feed/speed settings, Metav’s advisors can provide tailored recommendations to match the machining task. For supply and technical advice on the Teknik Cutting Tools parting tool holder D756TM, contact Metav Werkzeuge for prompt, application‑focused support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D756TM Manufacturer: Teknik Cutting Tools Facts Weight: 0.712 kg Overall length: 150 mm Shank dimensions: 25 x 25 mm Special features Cutting width: 2 mm Maximum plunge depth: 19 mm Compatible inserts: 2C DGN Compatible insert maker: ISCAR ISO designation: 2525 Cutting direction: Right FAQ What insert type fits this holder? The holder accepts 2C DGN indexable inserts; ISCAR‑compatible plates are supported for a broad selection of chipbreakers and grades. Is the shank size suitable for standard tool posts? Yes, the 25 x 25 mm shank matches common tool post clamping standards and provides rigidity for parting tasks. How deep can this holder plunge when parting? Maximum plunge depth is 19 mm, allowing deeper separations within the holder’s nominal capacity. Which cutting direction is intended for this tool? The design is for right‑hand cutting, suitable for typical lathe feed orientations. What is the product SKU for ordering? Order reference is D756TM, listed under Teknik Cutting Tools parting holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact 25 × 25 mm clamping profile combined with a 3 mm cutting width and 22 mm maximum cutting depth for secure, reproducible parting. The solid 150 mm overall length and 0.711 kg mass ensure stable machining—order the D764TM through Metav Werkzeuge or consult our specialists for application support. D764TM Parting Tool Holder (right-hand) by Teknik Makina — 25 × 25 mm, 150 mm A robust D764TM Parting Tool Holder engineered for right-hand parting and grooving in turning operations, compatible with 3C DGN inserts and optimised for secure clamping. 25 mm shank height and width 3 mm cutting width for narrow parting 22 mm maximum cutting depth 150 mm overall length for rigidity Compatible with 3C DGN inserts (ISCAR) Compact dimensions that deliver rigidity and repeatability The holder’s 25 mm shank height and width, together with a 150 mm overall length, create a stiff toolholder that reduces vibration and improves dimensional repeatability in parting operations. The 0.711 kg mass contributes to mechanical stability, which is particularly important when cutting narrow grooves; a rigid assembly lowers the risk of chatter and helps maintain consistent component faces. The item is specified to ISO designation 2525, allowing easy comparison with other industrial toolholders and simplifying selection for machinery set-ups. Purpose-built for right-hand parting with proven insert compatibility Designed for right-hand cutting, the clamp accepts 3C DGN indexable inserts and mates with the bores bar designation 3C-R DGN, enabling straightforward retrofit into existing tool posts. The 3 mm cutting width supports fine, material-saving parting operations while the 22 mm maximum cutting depth allows confident engagement for typical through-parting and shallow grooving tasks. The secure clamping geometry, which is explained by the holder’s ISO code, ensures repeatable insert seating and reduces set-up time during shift changes. Quick set-up and reduced machine downtime The holder’s design focuses on ease of handling and efficient changeovers. With a standard insert form and clear right-hand orientation, replacements are fast and intuitive, which minimises machine downtime and supports higher throughput in batch production. Because the clamp is compatible with widely used ISCAR inserts, stock management is simplified and tool rotation becomes more economical—fitting existing inventory reduces ordering complexity and shortens lead times for replacements. Application guidance and supply reliability Suitable for standard parting and grooving duties on turning centres, the holder is intended for professional workshops and production environments seeking a balance between compact geometry and solid performance. The D764TM’s familiar interfaces and measured dimensions make it straightforward to specify within tool lists and engineering drawings. For customers requiring further clarification on fitment or integration into specific tool posts, Metav Werkzeuge offers technical consultation and a broad product range to reduce supplier count and ensure dependable delivery. For tailored advice or to secure local supply of the Teknik Makina D764TM parting tool holder, contact Metav Werkzeuge — technical consultants are available from Emmerich to support specification and logistics; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D764TM Manufacturer: Teknik Makina Weight: 0.711 kg Overall length: 150 mm Shank height: 25 mm Shank width: 25 mm Cutting width: 3 mm Maximum cutting depth: 22 mm Cutting direction: right-hand Insert family: 3C DGN Compatible insert manufacturer: ISCAR ISO designation: 2525 Bar designation: 3C-R DGN FAQ Which inserts fit this holder? The D764TM accepts 3C DGN indexable inserts; common ISCAR variants are compatible with the holder’s clamping geometry and ISO 2525 seating. Is the holder right- or left-hand? This toolholder is specified for right-hand parting and grooving operations and is marked accordingly for straightforward set-up. What is the maximum cutting depth? The D764TM supports a maximum cutting depth of 22 mm, which suits typical through-parting and shallow grooving tasks. How does the shank size affect stability? The 25 mm × 25 mm shank provides a compact yet stiff interface; increased rigidity reduces vibration and contributes to repeatable parting results. Can the D764TM be mounted in standard tool posts? Yes; with its ISO-based dimensions (designation 2525) and the 3C-R DGN bar reference, the holder is suitable for conventional turning tool posts prepared for this family. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 3 mm cutting width and Korloy MGM 3 insert compatibility for precise, repeatable parting operations; the right‑hand orientation and 25 mm head width ensure secure clamping and stable cuts. Order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Teknik Makina Parting Clamp Holder D782TM — right‑hand, 3 mm cutting width The Parting Clamp Holder is a right‑hand grooving and parting tool holder for external lathe work, designed for use with industry‑standard indexable inserts and compact tool posts Right‑hand cutting orientation 3 mm cutting width for fine parting Compatible with Korloy MGM 3 inserts 25 mm cutting‑head width for stable clamping High‑precision parting for consistent production The holder delivers accurate parting thanks to its defined 3 mm cutting width and a maximum cutting diameter of 80 mm, which together allow controlled material separation and minimal vibration. The compact 25 mm head width and 40 mm cutting height provide the geometric stability needed for repeatable results, while the 25 mm shaft cutting length supports precise positioning. These metrics translate into fewer rejected parts and shorter setup times when integrating the tool into batch or single‑piece lathe work. Stable design that reduces chatter and rework Engineered for rigidity, the tool's mass—0.717 kg—and a 150 mm overall length contribute to damping that reduces chatter during cut. The right‑hand configuration is optimised for conventional lathe feeds and ensures predictable chip flow. Clamping via the secure holder geometry keeps the indexable insert firmly positioned, improving surface finish and extending insert life. For operations where surface quality and tool life are priorities, this grooving holder offers tangible efficiency gains. Seamless compatibility for simplified inventory Marked with the ISO designation 2525 and a shank reference 3C‑R (60‑80), the holder accepts standard inserts and mountings commonly found in workshops. Compatibility with Korloy MGM 3 plates reduces the need for bespoke tooling inventories and speeds up changeovers. The unit supports a maximum parting depth of 17 mm, making it suitable for a wide range of external parting and grooving tasks. Overall, the combination of standardised interfaces and compact dimensions eases integration into existing tooling systems and tool posts. For tailored advice on matching Corloy inserts, setup tips or to purchase the Teknik Makina D782TM, contact Metav Werkzeuge — experts in workshop integration and precision tools; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: D782TM Manufacturer: Teknik Makina Facts Cutting width: 3 mm Max. cutting diameter: 80 mm Cutting‑head width: 25 mm Cutting height: 40 mm Shaft cutting length: 25 mm Maximum parting depth: 17 mm Overall length: 150 mm Diameter: 60 mm Weight: 0.717 kg Cutting direction: right‑hand Special features Compatible with Korloy MGM 3 inserts ISO designation: 2525 Shank designation: 3C‑R (60‑80) Designed for external parting and grooving FAQ What insert type fits this holder? The holder is compatible with Korloy MGM 3 indexable inserts; use inserts specified for grooving and parting in the MGM 3 family. Is the tool suitable for right‑hand or left‑hand cutting? This model is configured for right‑hand cutting and is supplied as a right‑hand parting clamp holder (Teknik Makina D782TM). What is the maximum parting depth with this holder? The maximum parting depth is 17 mm, which accommodates many standard external grooving and parting applications. Which shank or tool post sizes does it match? The tool carries the shank reference 3C‑R (60‑80) and an ISO marking 2525, indicating compatibility with common shank sizes and tool‑post arrangements. How does the holder improve machining stability? With a 25 mm cutting‑head width, 40 mm cutting height and a weight of 0.717 kg, the holder provides mechanical rigidity that reduces chatter and improves surface finish with consistent insert clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-engineered holder that combines dependable clamping, compatibility with Horn-style indexable inserts and a slim 3 mm cutting width for efficient parting and grooving tasks. Order the parting tool holder directly via Metav Werkzeuge or consult our technical advisers for integration into existing lathe setups. Parting tool holder D705TM — right-hand parting and grooving holder by Teknik Makina Parting tool holder D705TM for right-hand turning and parting operations; designed for lathe use with Horn-compatible indexable inserts and ISO 2525 seating. Right-hand cutting orientation 3 mm cutting width Max plunge depth 18 mm Compatible with Horn indexable inserts Faster cycle times through narrow, repeatable cutting The holder is designed to support narrow, repeatable cuts: the 3 mm cutting width enables efficient material separation with minimal chip volume, which reduces cycle times on high-throughput turning operations. With a right-hand cutting orientation and rigid seating, the assembly provides a predictable cut geometry that simplifies process planning. For production environments where machining time and part consistency matter, the holder’s configuration is intended to reduce setup iterations and maintain a steady feed-to-depth ratio for grooving and parting tasks. Secure clamping for consistent surface quality A solid clamping geometry ensures the insert is retained under cutting loads, while the clamp height 25 mm and matching 25 mm head width provide a stable platform that reduces vibration. The holder’s ISO 2525 designation describes its insert seating and interchangeability, so replacement inserts from compatible ranges seat consistently and quality is preserved across tool changes. The assembly mass (0.72 kg weight) contributes to dampening, which helps achieve more consistent finishes and improved concentricity on turned parts. Easy integration and predictable cutting depth The design delivers practical fitment: the 150 mm overall length suits standard toolposts and leaves sufficient projection for deep grooving tasks without excessive overhang. The holder accepts bar/stem interfaces with designation 3C‑R S224, allowing it to be installed on compatible bores or adaptors. With a max plunge depth 18 mm, the holder is intended for controlled parting-off operations where plunge limits are critical; this parameter aids in process planning and prevents overextension during automated cycles. The combination of compact form and clearly defined dimensions supports straightforward incorporation into existing machining cells. For reliable right-hand parting operations, contact Metav Werkzeuge for expert advice and supply of Teknik Cutting Tools components — Metav Werkzeuge is available at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: D705TM Manufacturer: Teknik Makina Core data Clamp height: 25 mm Head width: 25 mm Holder width: 25 mm Cutting width: 3 mm Max plunge depth: 18 mm Overall length: 150 mm Weight: 0.72 kg Special features Compatible with Horn indexable inserts ISO 2525 seating designation Bar/stem designation: 3C-R S224 Right-hand cutting orientation Parting / grooving tool holder design FAQ What insert types fit this holder? The holder accepts Horn-style indexable inserts that match the ISO 2525 seating; inserts must correspond to the 3 mm cutting width for correct clamping and performance. Is the holder suitable for left-hand operations? This item is configured for right-hand cutting; left-hand operations require a corresponding left-hand holder or a mirrored tool design. How deep can the holder plunge when parting? The holder provides a max plunge depth of 18 mm, which should be observed to avoid overextension and ensure predictable cutting behaviour. Which shank or bar connection is required? The toolholder is specified with a bar/stem designation 3C-R S224, which is compatible with matching adaptors and toolpost interfaces. Will the holder reduce vibration during heavy cuts? The combination of its clamp height 25 mm, head width and mass (0.72 kg weight) is intended to improve rigidity and vibration damping for parting and grooving tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigidity, precise 3 mm cutting capability and Korloy insert compatibility for consistent parting results; the compact design and 150 mm overall length support efficient lathe setups. Order the Parting toolholder D687TM directly via Metav Werkzeuge or ask our consultants if needed. Parting toolholder D687TM – right-hand, 3 mm cutting width (Teknik Makina) Parting toolholder D687TM is a right-hand clamp-style holder for 3C MGM indexable inserts, engineered for controlled parting and grooving on conventional and CNC lathes Right-hand cutting direction 3 mm cutting width for narrow grooves 25 mm rigid clamping head Compatible with Korloy 3C MGM inserts Engineered for precise, repeatable parting with measurable advantages This clamp-style toolholder delivers repeatable parting performance by combining a slim 3 mm cutting width with a robust 25 mm clamping head, minimising deflection during cut-off operations. The holder’s geometry and mass distribution make it well suited to tasks where consistent groove width and surface quality are required; the 150 mm overall length provides workable reach without compromising rigidity. For workshops aiming to reduce scrap and rework, the measurable benefits are shorter cycle times and fewer insert changes, which supports predictable production output. Seamless integration with standard inserts and tool systems Designed around the ISO designation 2525 and the 3C-R MGM shank, the holder accepts 3C MGM indexable inserts and is specified as compatible with Korloy tooling. This compatibility simplifies tooling logistics: standard inserts can be used without special adaptors, and insert changes are executed with the familiar clamping system. The clamp mechanism secures the insert reliably, so insert seating is stable and vibration is reduced. For procurement and maintenance teams, the result is fewer inventory variants and faster machine downtime recovery. Productivity and workshop reliability through focused design With a nominal weight of 0.727 kg and a maximum parting depth of 25 mm, the holder balances mass for stability with the manoeuvrability required in tight setups. The right-hand cutting orientation is specified for conventional turning directions and is clearly indicated to aid process planning. The clamp design allows simple insert replacement and secure fixation, which extends tool life and supports consistent surface finishes. Assistance for process integration is available from Metav Werkzeuge’s technical team, helping to map the holder’s characteristics to specific lathe models and chip-control requirements. Contact Metav Werkzeuge for tailored advice on the D687TM right-hand parting toolholder and arrange prompt delivery from our Emmerich hub Technical Data Article number: D687TM Manufacturer: Teknik Makina Facts Overall length: 150 mm Cutting width: 3 mm Clamping head width: 25 mm Maximum parting depth: 25 mm Weight: 0.727 kg Cutting direction: right Special features ISO designation: 2525 Shank designation: 3C-R MGM Compatible inserts: 3C MGM Compatible insert manufacturer: Korloy FAQ What insert types fit this holder? The D687TM parting toolholder accepts 3C MGM indexable inserts and is specified compatible with Korloy inserts for straightforward integration into existing tooling stocks. Is the cutting direction fixed? Yes, the holder is configured for a right-hand cutting direction and is intended for operations that require right-hand parting. What is the maximum cutting depth? The toolholder supports a maximum parting depth of 25 mm, allowing deep grooving and reliable parting-off when correctly mounted. Which shank standard does the toolholder use? The holder uses the 3C-R MGM shank designation and the ISO 2525 mounting reference for compatibility with standard tool posts and turrets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust left-hand design combined with a 25 mm cutting head and a 4 mm insert width to deliver stable, narrow parting operations that reduce chatter and setup time; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Parting Tool Holder D806TM — Left-hand parting tool holder with 25 mm head width (Teknik Makina) A left-hand Parting Tool Holder D806TM for precision lathe parting and grooving, compatible with Korloy MGM 4 inserts. Left-hand orientation for precise cut-off 25 mm cutting head for stable support 4 mm insert width for narrow parting Compatible with Korloy MGM 4 inserts Engineered for accurate, repeatable parting The holder is designed to provide consistent repeatability in cut-off operations by combining a rigid support geometry with a controlled cutting height of 45 mm. Its left-hand configuration and defined max parting depth of 20 mm reduce lateral deflection during plunge cuts, which helps to maintain tolerances and prolong insert life. Where tight concentricity and reliable separation are required, the stable head profile and clear dimensional references promote predictable results on both production and one-off turning tasks. Rapid integration with standard inserts and shanks Compatibility with established standards speeds setup and reduces tooling inventory. The clamping system accepts Korloy MGM 4 inserts and uses the ISO shank designation 2525, while the shank option 4C‑L (50–60) supports common lathe tool posts. These standard interfaces allow quick changeover of inserts and straightforward alignment, so downtime is minimised and the toolholder can be deployed across multiple turning centres without additional adaptors. Built for stable machining and chip control A 25 mm cutting head width and a 4 mm insert width combine to give a narrow, well-supported cutting edge that favours precise, low-vibration cutting in parting and grooving applications. The holder’s max cutting diameter of 60 mm and overall length of 150 mm balance accessibility with rigidity, so operators gain controlled chip formation and safer part separation. The compact mass of 0.704 kg also helps reduce inertial forces during rapid feed changes, contributing to cleaner finishes and fewer re‑works. Supply reliability and workshop confidence Sourcing this holder through Metav Werkzeuge links product performance with dependable logistics and practical aftercare. Metav’s emphasis on accessible precision and a broad industrial catalogue ensures that a tested, compatible parting holder is available when needed, helping workshops to consolidate suppliers and maintain uptime. The established fit with Korloy inserts and ISO shank conventions also supports predictable replacement cycles and lowers the administrative burden of tooling management. For a dependable left-hand parting solution from Teknik Makina, contact Metav Werkzeuge to confirm fitment with machine and inserts and to secure fast delivery from Emmerich; Metav’s consultants are available via email or phone to advise on application-specific selection. Technical data SKU: D806TM Manufacturer: Teknik Makina Product type: Parting tool holder Core dimensions & measurable data Cutting head width: 25 mm Insert width: 4 mm Max parting depth: 20 mm Cutting height: 45 mm Max cutting diameter: 60 mm Effective cutting shaft length: 25 mm Overall length: 150 mm Weight: 0.704 kg eCl@ss: 21181005 Special features & compatibility Compatible inserts: Korloy MGM 4 ISO designation: 2525 Shank type: 4C-L (50-60) Orientation: left-hand FAQ Which inserts fit the parting tool holder? The holder is compatible with Korloy MGM 4 inserts; the clamping geometry and insert pocket are sized for that series to ensure a secure fit and repeatable positioning. What is the maximum parting depth achievable? The toolholder supports a maximum parting depth of 20 mm, which is specified for safe, stable operations without compromising the clamping integrity. Can the holder be used on small-diameter workpieces? Yes — with a maximum cutting diameter of 60 mm and a compact overall length of 150 mm, the holder is suitable for many small- to medium-diameter turning tasks that require narrow parting cuts. What shank standards does this holder match? The toolholder uses the ISO designation 2525 and the shank reference 4C‑L (50–60), making it compatible with commonly used lathe tool posts and mounting systems. Is this tool suitable for high-feed or aggressive parting? The holder’s rigid 25 mm cutting head and supported 4 mm insert width provide good stability; however, cutting parameters should be aligned with insert grade and lathe conditions to avoid overload — adapt feeds and speeds according to material and insert recommendations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robustly dimensioned for precise parting, the holder pairs a 25 mm clamping head with a 5 mm cutting width and Korloy MGM 5 compatibility for consistent groove quality; order the parting clamp holder directly via Metav Werkzeuge or request advice from our consultants for fast integration. Teknik Makina Parting clamp holder D818TM — 25 mm clamping head, left-hand orientation A parting clamp holder engineered for left-hand turning and parting operations, compatible with Korloy MGM 5 indexable inserts and designed to fit ISO 2525 tooling interfaces for quick shop-floor integration. 25 mm clamping head width 5 mm cutting width for narrow grooves Compatible with Korloy MGM 5 inserts Left-hand cutting orientation ISO 2525 shank, 5C-L (110–150) fit Consistent parting performance from defined cutting geometry The holder’s central advantages stem from its clearly defined geometry: a 25 mm clamping head and a 5 mm cutting width create a stable cut zone that reduces vibration and improves surface finish during parting. Compatibility with Korloy MGM 5 inserts means well‑established chip control and predictable wear characteristics; this transfers directly into fewer rejects and lower rework rates. Left‑hand orientation is built into the tool geometry to match lathe programming and toolpost setups, ensuring straightforward deployment on compatible machines. Rigidity and repeatability for reliable cycle times Engineered dimensions such as a cutting height of 45 mm, a maximum cutting diameter of 150 mm and a maximum parting depth of 20 mm contribute to mechanical stiffness and repeatable performance. The holder’s overall length of 150 mm and compact diameter (110 mm) offer a balance between reach and rigidity, while a mass of 0.718 kg helps dampen chatter in many common turning scenarios. These characteristics translate into steadier cycle times and a higher first‑pass yield when performing parting and grooving operations. Fast set‑up through standardised interfaces The holder uses an ISO 2525 designation and is compatible with the 5C‑L (110–150) shank fit, simplifying interchange with existing clamping systems and reducing set‑up time. For production environments where changeovers are frequent, the ability to accept standard Korloy MGM 5 inserts accelerates tooling swaps and minimises machine downtime. The ISO and shank compatibility makes the holder suitable for integration into diverse lathe toolposts and modular toolholding systems, supporting leaner workflows and easier inventory management. Practical workshop applications and procurement advantages Designed specifically for parting and narrow grooving tasks, the holder is suitable for series production and repair workshops seeking a dependable cut‑off solution. Its proven insert format and standardised shank reduce the need for bespoke tooling, helping consolidate procurement and spare‑parts inventories. Should clarification about fit or application be required, Metav’s consultants are available to advise on mounting details and application limits, ensuring the right tooling choice for the intended machining process. Contact Metav Werkzeuge to discuss integration options for the Teknik Makina parting clamp holder D818TM and secure tailored advice on tooling configuration and delivery from Emmerich. Technical data Article number: D818TM Manufacturer: Teknik Makina Core dimensions Clamping head width: 25 mm Cutting width: 5 mm Cutting height: 45 mm Maximum cutting diameter: 150 mm Maximum parting depth: 20 mm Overall length: 150 mm Diameter: 110 mm Shaft cutting length: 25 mm Weight: 0.718 kg Compatibility & features Compatible with Korloy inserts Fits MGM 5 indexable inserts ISO designation: 2525 Shank fit: 5C‑L (110–150) Left‑hand cutting direction FAQ Which inserts fit this holder? The Teknik Makina parting clamp holder D818TM accepts Korloy MGM 5 indexable inserts for proven chip control and predictable wear. Is the holder designed for left‑hand or right‑hand cutting? The tool is produced with a left‑hand cutting orientation to match left‑hand lathe setups. What is the maximum parting depth? Maximum parting depth is 20 mm as specified for the holder’s cutting geometry. Which shank and mounting standards are supported? The holder is compatible with ISO 2525 interfaces and fits the 5C‑L (110–150) shank specification for straightforward mounting. What are the key dimensions to check before ordering? Key dimensions include a 25 mm clamping head width, 5 mm cutting width, 45 mm cutting height, overall length 150 mm and a diameter of 110 mm. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 5 mm cutting width, left-hand orientation and compact 25 mm clamping dimensions delivers consistent, vibration‑reduced parting performance and dependable tool life; order the parting tool holder directly via Metav Werkzeuge or consult our specialists for application advice. Parting tool holder D879TM — left-hand parting holder, 5 mm cut, Teknik Makina The Parting tool holder D879TM is engineered for left-hand cut-off operations and integrates into standard boring-bar systems for clean, repeatable parting with indexable inserts Left-hand cutting orientation 5 mm maximum cutting width 25 mm clamping height and width Compatible with Sandvik indexable inserts Stable clamping for cleaner cuts and less vibration The holder’s rigid 25 mm clamping dimensions and compact 150 mm overall length combine to reduce deflection during parting, producing more consistent component faces and longer insert life. The relatively low weight of 0.725 kg supports rapid spindle acceleration without compromising stability. By pairing a narrow 5 mm cutting width with a robust clamping geometry, the system minimises chatter and supports reliable repeatability in series production or workshop batches. Seamless integration with existing tool systems Designed to accept standard indexable parts, the tool holder carries an ISO 2525 designation and is specified as compatible with Sandvik inserts and the 5C-123 SDV-L boring-bar format. This compatibility reduces setup time and inventory complexity: existing inserts and holders can be adopted quickly, so changeovers are faster and machine uptime improves. The left-hand orientation matches lathe programmes and fixture arrangements where cuts progress from the component’s right side towards the chuck. Productivity through controlled plunge depth and geometry With a maximum plunge depth of 18 mm, the holder is suitable for many common parting operations without unnecessary step changes in tooling. The controlled geometry supports efficient chip control when used with appropriate inserts and cutting parameters, helping to reduce secondary operations. The holder’s measured proportions enable confident feed and speed selection — prioritising throughput while maintaining surface quality and extending insert life. Practical service and supply reliability from Metav Metav’s workshop focus ensures the holder is supported by practical advice and dependable European distribution. The combination of a proven tool geometry and Metav’s logistics reduces procurement friction for precision shops and production facilities alike. For complex applications, Metav’s consultants can advise on insert selection and mounting to match material, machine power and cycle targets, helping to achieve measurable productivity gains. Secure the Teknik Cutting Tools parting tool holder via Metav Werkzeuge for consistent left-hand parting performance — technical advice and shipment from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: D879TM Manufacturer: Teknik Makina Brand: Teknik Makina SKU: D879TM Facts Weight: 0.725 kg Overall length: 150 mm Clamping height: 25 mm Clamping width: 25 mm Cutting head width: 25 mm Cutting width: 5 mm Max plunge depth: 18 mm Special features Left-hand cutting orientation Compatible with Sandvik indexable inserts ISO 2525 designation Compatible with 5C-123 SDV-L boring bar format Robust clamping geometry for reduced vibration FAQ What materials can the holder be used for? The parting tool holder D879TM is suitable for a wide range of general turning materials when paired with the correct Sandvik inserts; insert choice determines suitability for steel, stainless or non-ferrous workpieces. Which insert standard fits this holder? This holder accepts indexable inserts conforming to the ISO 2525 form factor and is specified for use with Sandvik inserts; verify insert geometry for optimal chip control. What is the maximum cutting depth for parting applications? The maximum plunge depth for this holder is 18 mm, which covers most standard parting operations without the need for stepped tooling. Is the holder right- or left-hand oriented? This model is a left-hand parting holder; it is designed for cuts that progress from the component’s right side toward the chuck. How does the holder integrate with existing boring bars? The holder is compatible with the 5C-123 SDV-L boring-bar designation, enabling straightforward integration into setups already using that bar type Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise parting and reliable clamp security thanks to the 6 mm cutting width, 18 mm maximum parting depth and robust 25 mm clamping dimensions; order the holder directly via Metav Werkzeuge or contact the consultants for application advice. Parting clamp holder D049TM — right-hand parting tool holder by Teknik Makina, 6 mm cutting width The parting clamp holder D049TM is a right-hand tool holder designed for precise parting and grooving operations using indexable inserts, suitable for general workshop and industrial turning applications. 6 mm cutting width for narrow parting 18 mm maximum parting depth 25 mm clamping width for stability Compatible with ZCC 6C ZT.D inserts 150 mm overall length for reach Faster, more accurate parting with minimal setup The D049TM delivers measurable improvements in cycle stability by combining a 6 mm cutting width with an 18 mm maximum parting depth, enabling efficient single-pass operations on a range of workpieces. The right-hand orientation supports standard turning setups and reduces the need for additional fixturing; this leads to shorter idle times and fewer tool changes per batch. Compatibility with ZCC 6C ZT.D indexable plates ensures predictable cutting geometry and consistent edge control, which is important for maintaining surface finish and minimising rework in production environments. Stable clamping for consistent results and reduced vibration A compact clamping frame with 25 mm head and holder widths provides a solid support interface between the tool post and the insert. Combined with an overall length of 150 mm and a mass of 0.745 kg, the assembly offers a balanced layout that reduces chatter and improves tool life. The clamp-style holder secures the parting insert firmly, which translates into repeatable part diameters and reduced scrap rates—especially beneficial in serial production where dimensional consistency is critical. Easy integration into existing turning stations Designed to fit standard tool posts, the holder carries an ISO 25×25 designation and the boreshaft reference 6C‑R ZT‑D, facilitating straightforward replacement and compatibility checks in mixed-machine workshops. The design supports commonly used insert shapes for parting and grooving tasks and allows for rapid insert replacement without complex adjustment. Where rapid delivery and dependable stock are required, Metav Werkzeuge provides supply continuity from Emmerich with technical advice available for selecting the correct insert geometry and clamping torque for the application. Contact Metav Werkzeuge today to secure the Teknik Makina D049TM parting clamp holder for reliable parting performance and expert application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D049TM Manufacturer: Teknik Makina Product name: Parting clamp holder (D049TM) Brand: Teknik Makina Compatible inserts: 6C ZT.D (ZCC) ISO designation: 25×25 Numbers / Core technical data Cutting width: 6 mm Maximum parting depth: 18 mm Holder height: 25 mm Head width: 25 mm Holder width: 25 mm Overall length: 150 mm Weight: 0.745 kg Cutting direction: right Designs / Special features Clamp-style insert mounting Compatible with ZCC 6C ZT.D indexable plates Bohrstangen designation: 6C-R ZT-D ISO holder designation: 25×25 FAQ Which insert types fit this holder? The D049TM is compatible with ZCC indexable plates specified as 6C ZT.D and accepts standard parting and grooving insert geometries for that family. Is the holder suitable for left-hand or right-hand cutting? This tool holder is configured for right-hand cutting and is intended for standard right-hand parting operations. What are the key dimensional limits for parting? Maximum cutting width is 6 mm with a maximum parting depth of 18 mm; the overall length is 150 mm. Which shank/ISO designation should the tool post accommodate? The holder follows an ISO 25×25 profile and references the boreshaft designation 6C‑R ZT‑D for mounting compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise compatibility with MGMN 500 indexable inserts and the clear SKU identification for efficient tool management; the result is stable, predictable parting operations and reduced setup time. Order the parting blades directly via Metav Werkzeuge or ask our consultants if needed. Parting Blades for MGMN 500 Indexable Inserts (KL33TM) by Teknik Makina The Parting Blades for MGMN 500 Indexable Inserts are a dedicated solution for precision grooving and parting in CNC turning, engineered to accept standard MGMN 500-format inserts and suit high-volume workshop environments. Compatible with MGMN 500 indexable inserts Teknik Makina engineering and traceable SKU Clear SKU: KL33TM for easy procurement Designed for standard grooving and parting operations Precision and compatibility that reduce cycle variation These parting blades are designed around the MGMN 500 insert format, which ensures a standardised seating and clamping geometry. The precise interface reduces micro-movements during cutting, translating to improved repeatability and fewer rejected parts over production runs. By using a tool matched to a common insert family, tool changes become predictable; the modular nature of indexable inserts limits machine downtime and supports consistent component tolerances. The combination of a defined insert pocket and accurate seating contributes to a controlled cut and predictable tool life. Streamlined workshop logistics and faster changeovers Clear identification with the KL33TM SKU simplifies stock management and reordering in busy workshops. The use of a widely adopted insert format means fewer unique spare parts are required on the shelf, which eases procurement and reduces storage complexity. Documented compatibility with the Korloy insert range further aids selection and cross-sourcing where preferred insert brands are already in use. Simple, repeatable replacement procedures speed up changeovers, allowing operators to bring machines back to full productivity with minimal interruption. Stable supply and partner-backed reliability for continuous production Manufactured by Teknik Makina and listed with a concise article identifier, these blades are suitable where dependable delivery and clear product traceability are important. Working with a supplier that places an emphasis on workshop-ready solutions reduces the risk of supply gaps. Metav Werkzeuge’s role as a distribution partner provides an additional layer of assurance for European operations, combining logistic proximity with a broad portfolio that helps consolidate suppliers and streamline purchasing. The result is a pragmatic route to maintain production continuity without unnecessary complexity. For availability, suitability checks and ordering of Teknik Makina parting blades (KL33TM) contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing turning setups. Technical Data Article number: KL33TM Eclass: 21181018 Manufacturer: Teknik Makina Product type: Parting blades Facts Compatible inserts: MGMN 500 Suitable insert manufacturer: Korloy SKU: KL33TM Special features Label: Stechschwerter MGMN 500 Product name English: Parting blades for MGMN 500 Indexable Inserts Category path: Zerspanen > Stechschwerter FAQ What insert format do these blades accept? The parting blades accept the MGMN 500 indexable insert format, enabling the use of standard MGMN 500 inserts with consistent seating and clamping. Are Korloy inserts compatible with this tool? Yes, the blades are specified as suitable for inserts from Korloy, making cross-brand sourcing straightforward for Korloy MGMN 500 inserts. What is the product identifier for ordering? Order using the SKU KL33TM; the designation ensures correct identification of the parting blades in procurement and inventory systems. Is this tool intended for general grooving and parting in turning operations? These blades are intended for precision grooving and parting in CNC turning, designed around the MGMN 500 insert standard to support predictable changeovers and repeatable results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable, repeatable parting operations through robust clamping and precise geometry. With a 5 mm cutting width and right-hand cutting configuration, this holder combines secure insert retention and straightforward mounting for efficient grooving workflows — order directly via Metav Werkzeuge or consult our specialists for application advice. Parting tool clamp holder — Right‑hand grooving holder with 5 mm cutting width (Teknik Makina) The Parting tool clamp holder is a right‑hand clamping solution for parting and grooving applications, compatible with Korloy MGM 5 inserts and designed for installations using 5C‑R (110–150) mounts Right‑hand cutting configuration Compatible with Korloy MGM 5 inserts 5 mm cutting width for accurate parting 110 mm shank diameter for stable clamping Consistent parting performance through precise geometry The holder is engineered to deliver repeatable parting cuts thanks to a 5 mm cutting width and a 25 mm cutting head width, which together ensure controlled chip flow and reduced risk of insert overload. The right‑hand orientation and defined cutting height of 45 mm contribute to a predictable cutting position, minimising vibrations and improving surface finish. For workshop planners, this translates into fewer rejected parts and a steadier production rhythm. Fast setup and secure mounting for shorter downtime Designed with the 2525 ISO designation and compatible with a 5C‑R (110–150) mounting arrangement, the clamp holder fits common spindle interfaces and clamping systems. The 110 mm shank diameter and 150 mm overall length give a balanced combination of reach and rigidity, enabling quick changeovers between grooving and parting tasks. As a result, machine uptime is optimised and setup complexity is reduced, supporting efficient batch processing in small and medium machining environments. Stable clamping for longer insert life and safer operation With a robust clamping mechanism and a compact mass of 0.718 kg, the holder maintains firm insert retention under moderate cutting forces, supporting a maximum parting depth of 20 mm and a maximum cutting diameter of 150 mm. Stable clamping lowers the incidence of chatter and uneven wear, which extends the service life of the Korloy MGM 5 inserts and reduces tooling costs over time. The holder’s geometry promotes predictable chip control, benefiting both surface quality and tool change intervals. For tailored advice on integrating this Teknik Makina parting tool clamp holder into existing setups, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for compatibility checks and delivery information Technical data Article number: D798TM Manufacturer: Teknik Makina ECLASS: 21181005 Core technical figures Cutting head width: 25 mm Randing tool height: 25 mm Maximum cutting diameter: 150 mm Shank cutting length: 25 mm Cutting height: 45 mm Cutting width (parting): 5 mm Maximum parting depth: 20 mm Weight: 0.718 kg Diameter: 110 mm Overall length: 150 mm Special features Right‑hand cutting Compatible with Korloy as insert manufacturer Suitable for MGM 5 inserts ISO designation: 2525 Mounting: 5C‑R (110–150) FAQ Which inserts fit this clamp holder? The clamp holder is specified for Korloy MGM 5 inserts; the geometry and clamping force are optimised for that series. What is the maximum parting depth achievable? Maximum parting depth is 20 mm under correct mounting and machining conditions with appropriate insert selection. Can the holder be used on small lathes with a 110 mm spindle bore? The holder is compatible with 5C‑R (110–150) mountings and a 110 mm shank diameter, making it suitable for installations that accept that interface. How does the holder improve insert life? Stable clamping and controlled cutting geometry reduce vibration and uneven loading, which helps to extend the service life of the Korloy MGM 5 inserts and improves surface finish consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of sturdy 32 mm blade height, a slim 3.45 mm cutting width and a 36 mm maximum clamping depth to maintain consistent, repeatable parting cycles on production lathes. Order the KL36TM parting blade directly via Metav Werkzeuge or ask our consultants if needed. KL36TM Parting Blade — Teknik Makina, 32 mm height · 25 mm cutting height The KL36TM parting blade is a lathe parting tool blade engineered for precision grooving and secure parting operations, designed to accept Korloy KGMN 400-style inserts and to fit standard clamp holders with up to 36 mm engagement. 32 mm blade height for deep parting 25 mm effective cutting height 3.45 mm blade width for narrow grooves Compatible with Korloy KGMN 400 inserts Engineered for consistent parting performance The KL36TM is built around a clear dimensional specification that prioritises rigidity and repeatability in turning operations. With a blade height of 32 mm and an effective cutting height of 25 mm, the component offers sufficient cross-section to resist deflection during cut-off and grooving tasks, while the 150 mm overall length provides the reach required for many chuck-mounted setups. The 3.45 mm blade width helps to reduce material loss and minimise cycle times for narrow parting lines; this geometry translates into stable chip formation and reliable seating in the clamp holder, which supports smoother cycle-to-cycle repeatability. Precision compatibility to streamline tooling setups Compatibility with established insert geometries is a decisive efficiency factor in modern workshops. The KL36TM accepts KGMN 400 insert formats and is specified for use with Korloy-type inserts, enabling straightforward integration into existing tooling inventories and reducing changeover complexity. The clamp interface allows a maximum cutting depth of 36 mm in suitable holders, so the blade adapts to common parting and grooving depths without bespoke fixtures. Standardised insert use and clear dimensional data reduce setup time and support predictable tool life, delivering measurable gains in machining throughput. Workshop integration and supply reliability Sourcing and logistics are part of overall process efficiency. Stocked and distributed via Metav Werkzeuge, this parting blade benefits from a European supply hub that acts as a quality filter for industrial buyers. The availability of documented dimensions and insert compatibility simplifies procurement and storekeeping, while Metav's established distribution ensures consistent delivery to the workbench. This configuration suits production and maintenance departments that require dependable, repeatable tooling components without prolonged lead times. Contact Metav Werkzeuge in Emmerich for procurement and technical clarification on the KL36TM parting blade — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and order options Technical data Article number: KL36TM Manufacturer: Teknik Makina Product: Parting blade (lathe) Facts Blade height: 32 mm Cutting height: 25 mm Blade width: 3.45 mm Overall length: 150 mm Max clamping/cutting depth in holder: 36 mm Special features Compatible inserts: KGMN 400 Suitable insert manufacturer: Korloy Designed for clamp holders with 36 mm engagement FAQ Which inserts fit the KL36TM parting blade? The KL36TM parting blade is specified for KGMN 400 inserts and matches Korloy-style geometry for straightforward mounting and replacement. What maximum cutting depth does the blade support in a holder? The parting blade supports a maximum clamping/cutting depth of 36 mm when used with an appropriate clamp holder. Is the KL36TM suitable for narrow groove parting? Yes, the KL36TM’s 3.45 mm blade width is intended for narrow groove and precision parting applications where reduced kerf is required. Where can this parting blade be sourced for production use? Stock and distribution are handled via Metav Werkzeuge; Metav supplies the KL36TM and can advise on holder compatibility and logistics. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the holder’s combination of secure clamping, precise 3 mm cutting width and compatibility with Korloy MGM 3 inserts for efficient parting operations; order the component directly via Metav Werkzeuge or contact our consultants for tailored advice. D780TM parting and grooving clamping holder by Teknik Makina — right‑hand, max. 60 mm cutting diameter The D780TM parting and grooving clamping holder is designed for secure clamping of Korloy MGM 3 indexable inserts and for precise right‑hand parting and grooving tasks in workshop and light industrial turning applications Right-hand cutting direction Compatible with Korloy MGM 3 inserts Max. cutting diameter 60 mm 3 mm cutting width for precise parting Precision clamping for dependable parting The holder delivers secure clamping in applications where consistent parting is essential. Its 3 mm cutting width and maximum parting depth of 17 mm make it suitable for fine separation and slotting operations where tight tolerances matter. The tool’s ISO 2525 designation ensures standardised shank geometry for reliable mounting, while an overall length of 150 mm balances reach and rigidity. These measurable specifications translate directly into repeatable results on the lathe, reducing scrap rates and ensuring predictable cycle times with minimal rework. Fast integration and proven insert compatibility Designed to accept Korloy MGM 3 indexable inserts, the clamping system simplifies tool setup and tool changeovers. The holder’s configuration supports a right‑hand cutting orientation and pairs with shank designation 3C‑R (50–60) for secure seat alignment. Clear compatibility reduces selection uncertainty and shortens downtime during tool replacement. By using standard insert types and shank interfaces, the holder facilitates immediate integration into existing tool inventories, enabling efficient process planning and quick adaptation to production demands. Robust build for consistent production performance Manufactured with attention to functional dimensions, the holder features a 25 mm cutting head width and a 40 mm cutting height, providing stable support at the cutting zone. A blade shaft length of 25 mm helps maintain tool rigidity, while the unit’s modest weight of 0.741 kg keeps dynamic loads manageable for predictable spindle behaviour. These attributes result in lower vibration and improved surface finish during parting operations. Where throughput and reliability are priorities, the holder contributes to steady manufacturing output and simplified quality assurance. Contact Metav Werkzeuge for precise guidance on the Teknik Makina D780TM parting and grooving clamping holder and to confirm fitment for specific machines and inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D780TM Manufacturer: Teknik Makina Product name: Stechklemmhalter (parting and grooving clamping holder) Facts Max. cutting diameter: 60 mm Cutting head width: 25 mm Head height: 25 mm Cutting height: 40 mm Blade shaft length: 25 mm Cutting width: 3 mm Max. parting depth: 17 mm Overall length: 150 mm Weight: 0.741 kg Special features Right‑hand cutting direction Compatible with Korloy MGM 3 inserts ISO designation: 2525 Shank designation: 3C‑R (50–60) FAQ Which inserts fit this clamping holder? The holder is compatible with Korloy MGM 3 indexable inserts and is designed for secure seating of these insert types in parting and grooving operations. What is the maximum cutting diameter and parting depth? Maximum cutting diameter is 60 mm and the maximum parting depth is 17 mm for the D780TM parting and grooving clamping holder. Is the tool right‑hand or left‑hand? This clamping holder is configured for right‑hand cutting applications. What are the overall length and weight of the holder? Overall length is 150 mm and weight is 0.741 kg, offering a balance of reach and rigidity. Which shank and ISO designation does it use? Shank designation is 3C‑R (50–60) and the holder follows ISO 2525 standard geometry for mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable left-hand cutting, 25 x 25 mm clamping and a 5 mm cutting width to secure repeatable parting and grooving operations; order directly via Metav Werkzeuge or consult the technical team for application support. Stechklemmhalter — left-hand clamping holder, 25 x 25 mm, 5 mm cutting width (Teknik Makina) Stechklemmhalter is a left-hand clamping holder designed for precise parting and grooving in turning operations, optimised for Korloy 6C MGM inserts and compact workshop set-ups. Left-hand cutting orientation 25 x 25 mm holder dimensions 5 mm cutting width for narrow grooves Compatible with Korloy 6C MGM inserts Stable clamping for accurate parting and groove quality The holder provides stable clamping thanks to its compact 25 x 25 mm profile and ISO designation 2525, which together ensure consistent cutter engagement and reduced chatter during left-hand operations. Designed for grooving and parting tasks, the tool holder keeps the insert position rigid so that each cut delivers repeatable edge quality and dimensional control. This focus on clamping precision lowers scrap rates and supports predictable cycle times on serial turning work. Compatibility that speeds setup and tool change Compatibility with 6C MGM indexable inserts and the 6C-L MGM bore-bar designation simplifies inventory and tool-change routines. The holder’s 150 mm overall length balances accessibility and rigidity, while the modest mass of 0.745 kg helps maintain machine balance without sacrificing sturdiness. Clear matching to Korloy inserts reduces selection uncertainty and shortens downtime during retooling — an operational advantage in busy workshops where tool-change time is critical. Designed capacity and operational range for deeper cuts With a cutting width of 5 mm and a maximum plunge depth of 27 mm, the clamping holder accommodates narrow grooving and moderate-depth parting tasks without frequent repositioning. The left-hand cut orientation is specified for machines and set-ups where tool approach and chip flow require that direction. The combination of compact dimensions and defined cutting range makes this holder a practical choice for engineers seeking a reliable, low-complexity tooling solution that integrates with established insert systems. For reliable left-hand grooving solutions from Teknik Makina, contact Metav Werkzeuge for tailored application advice and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and availability Technical data Article number: D621TM Manufacturer: Teknik Makina Designation: Stechklemmhalter SKU: D621TM ISO designation: 2525 Facts Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting width: 5 mm Maximum plunge depth: 27 mm Weight: 0.745 kg Cutting direction: left Special features Suitable for inserts: 6C MGM Compatible insert manufacturer: Korloy Boring bar designation: 6C-L MGM FAQ Which indexable inserts fit this holder? The Stechklemmhalter accepts 6C MGM indexable inserts and is specified for compatibility with Korloy insert types. What is the maximum plunge depth for grooving operations? Maximum plunge depth is 27 mm, allowing deeper parting cuts within the holder’s operational range. Which cutting direction is this tool holder designed for? This clamping holder is configured for left-hand cutting, suitable for machines and set-ups requiring that orientation. What are the holder dimensions and length? The holder measures 25 x 25 mm (height x width) with an overall length of 150 mm. Is the holder suitable for quick tool changes and workshop integration? The Stechklemmhalter is designed to match common insert and boring-bar designations (6C MGM / 6C-L MGM), which streamlines tool changes and integration into existing workshop tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust compatibility and precise cutting geometry for reliable parting and grooving cycles; the compact 5 mm cutting width and ISO 2525 shank format ensure straightforward integration into existing turning setups. Order guidance and technical consultation are available via Metav Werkzeuge for quick implementation. Parting and grooving tool holder D771TM — right‑hand, 5 mm cutting width (Teknik Makina) Parting and grooving tool holder D771TM is a right‑hand turning tool holder designed for precision parting and narrow‑groove machining using 5C GRP indexable inserts. Right‑hand cutting orientation 5 mm cutting width for narrow grooves ISO 2525 shank for standard fixtures Compatible with ISCAR 5C GRP inserts Consistent cycle times through defined cut geometry The compact design with a 5 mm cutting width and a 24 mm maximum grooving depth produces repeatable groove profiles and predictable chip flow. This geometric definition reduces the need for frequent adjustments and supports stable cutting parameters in serial and batch workpieces. The right‑hand cutting orientation paired with the holder’s rigid body keeps vibration low, which contributes to surface quality and reduces tool change frequency. For machining planners, the clear limits for groove width and depth simplify process planning and tooling lists. Secure mounting for quick set‑ups and flexible integration The holder is supplied in the standard ISO 2525 format and pairs with the 5C‑R GRP shank interface, enabling compatibility with established boring‑bar fixtures and quick retrofitting into existing tool posts. Compatibility with ISCAR 5C GRP indexable inserts ensures access to a wide range of cutting grades and chipbreakers without custom adapters. The square clamping block measures 25 × 25 mm, giving a predictable clamping face that simplifies alignment and repeat fixturing. These features reduce set‑up time and lower the risk of tolerance drift after re‑clamping. Robust construction for everyday workshop reliability Engineered for routine turning environments, the holder’s compact overall length of 150 mm and a mass of 0.739 kg make handling and positioning effortless during changeovers while maintaining sufficient stiffness for finishing and roughing passes within its specified limits. The machined body and clamping surfaces are dimensioned to secure the insert reliably, promoting safer high‑productivity runs. Delivered and supported via Metav Werkzeuge’s European distribution, the component benefits from a quality inspection filter that helps ensure fit and function when integrating into production lines. Contact Metav Werkzeuge for tailored advice on Teknik Makina tool holders and matching inserts — our specialists in Emmerich will recommend the optimal clamping solution for the application. Technical data Article number: D771TM Manufacturer: Teknik Makina ISO designation: 2525 Compatible inserts: 5C GRP (ISCAR) Facts Weight: 0.739 kg Overall length: 150 mm Clamping height: 25 mm Holder width: 25 mm Cutting head width: 25 mm Cutting width: 5 mm Maximum grooving depth: 24 mm Cutting direction: right Special features Shank system: 5C‑R GRP Compatible with ISCAR 5C GRP indexable inserts Right‑hand cutting orientation Compact 25 × 25 mm clamping body FAQ Which indexable inserts fit this holder? The D771TM parting and grooving tool holder is specified for 5C GRP inserts and is compatible with ISCAR 5C GRP grades and geometries. Is the holder suitable for left‑hand cutting? No — the holder is configured for right‑hand cutting direction only, as stated in the product specification. What is the maximum grooving depth for this tool holder? The maximum grooving (stech) depth is 24 mm, as defined for the D771TM model. Which shank or boring‑bar interface is required? A 5C‑R GRP shank interface is indicated for mounting; the holder conforms to ISO 2525 format for standard fixture compatibility. What are the overall dimensions and mass? Overall length is 150 mm and the mass is 0.739 kg, providing a balance between rigidity and ease of handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 25 mm working diameter, eight cutting edges and a 37 mm cutting height that deliver efficient, repeatable material removal; purchase arrangements are available via Metav Werkzeuge and technical consultants can be consulted for application details. Igelfräser HF11TM — Indexable milling cutter, Ø25 mm, 8 cutting edges (Teknik Makina) A versatile Igelfräser HF11TM indexable milling cutter engineered for high‑rate roughing and profile machining with APKT 1003 inserts Ø 25 mm shank for rigid clamping Eight cutting edges for high material removal 37 mm cutting height for deep profiles Compatible with APKT 1003 Korloy inserts Faster cycles through stable geometry and high metal removal The compact design with a 25 mm working diameter and eight cutting edges provides consistently high stock removal while maintaining dimensional stability. The cutter’s geometry reduces vibration and enhances process reliability, which in turn shortens cycle times and raises throughput. This configuration suits operations that prioritise efficiency and repeatability, offering a direct productivity benefit without complex setup changes. Reduced downtime with an indexable insert system Using the APKT 1003 insert family—compatible with Korloy—permits swift insert indexing and predictable wear management. The insert clamping uses M2.5x5.5 Torx screws and a T08 key for secure fastening, making maintenance straightforward and repeatable. Because worn edges are replaced rather than the whole tool, tooling costs are controlled and machine uptime is improved, which supports a lean production environment. Compact, balanced design for workshop flexibility An overall length of 150 mm combined with a tool weight of 0.515 kg yields a well‑balanced cutter that is easy to integrate into standard toolholders and adaptors. The assembly is engineered to deliver stiffness where it matters, so the setup remains reliable even during demanding passes. The indexable concept lowers inventory complexity: stocking a small range of inserts keeps replacement cycles simple and cost‑effective while preserving machining quality. For procurement or application advice on the Teknik Cutting Tools indexable system HF11TM, contact Metav Werkzeuge to discuss suitability for specific setups and to arrange supply: info@metav-werkzeuge.com | +49 2822 7131930. Technical data Article number: HF11TM Brand: Teknik Makina Manufacturer SKU: HF11TM Core specifications Diameter: 25 mm Shank diameter: 25 mm Cutting edges: 8 Cutting height: 37 mm Overall length: 150 mm Weight: 0.515 kg Additional features Compatible inserts: APKT 1003 Fits inserts by: Korloy Torx screw: M2.5x5.5 Torx key: T08 FAQ What insert type does this cutter use? The cutter is designed for APKT 1003 indexable inserts; Korloy inserts are a listed match for this system. How many cutting edges does the tool provide? This indexable milling cutter features eight cutting edges, which supports high material removal rates and smoother engagement. What are the key dimensions to check for holder compatibility? Relevant dimensions are a working and shank diameter of 25 mm and an overall length of 150 mm, which should be checked against the machine spindle and holder envelope. Which fastening hardware is required for insert changes? Insert clamping uses M2.5x5.5 Torx screws tightened with a T08 key; the secure fastening ensures repeatable seating of the inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine economical tooling with reliable indexable compatibility and a compact 20 mm shank for smooth milling cycles; the HF10TM offers six cutting positions and a 150 mm overall length to reduce downtime and tooling costs. Order the cutter via Metav Werkzeuge or consult our specialists for integration advice. Igelfräser HF10TM — Indexable cutter body, 20 mm shank (Teknik Makina) The Igelfräser HF10TM is a compact indexable milling cutter body designed for light to medium machining with APKT 1003 inserts, suitable for use in CNC machining centres and toolrooms For APKT 1003 indexable inserts 20 mm shank diameter for compact setups Six cutting edges for extended tool life 150 mm overall length for reach and stability Precision and productivity in a compact tool body The HF10TM is engineered as a stable indexable cutter body that accepts APKT 1003 inserts, providing a cost-effective alternative to solid tooling. The use of indexable carbide inserts keeps tooling costs controllable: worn edges are simply indexed or replaced, which shortens maintenance intervals and reduces inventory of full-diameter cutters. With a 20 mm shank and a balanced design, the assembly maintains run-out control in compact spindles, supporting repeatable results and steady cycle times. This configuration supports rational decision-making for production planners by linking measurable features—shank size, insert type, and number of cutting edges—to predictable operating behaviour. Secure clamping and straightforward handling for consistent results Clamping and insert retention are deliberately simple: the cutter is supplied with a Torx M2.5x5.5 screw (T08) for reliable fixation of the APKT inserts, reducing the risk of loosening under moderate loads. The six cutting edges arrangement spreads cutting forces and enables multiple indexing operations before replacement, improving throughput per tool. The tool’s cutting height of 28 mm and 150 mm overall length give sufficient engagement for many finishing and semi-finishing passes while keeping the tool overhang moderate. With a mass of 0.326 kg, the body is easy to handle during set-up yet substantial enough to dampen small vibrations in shorter overhang applications. Compatibility, workshop efficiency and supply confidence Delivered as a cutter body compatible with Korloy APKT 1003 inserts, the HF10TM simplifies spare-part logistics for workshops already using that insert family. The modular nature of the system shortens downtime: insert changes are fast, and a stock of APKT inserts covers multiple diameters and grades. The compact 20 mm attachment aids integration into smaller toolholders and machining centres where space is limited. For procurement and ongoing supply, Metav Werkzeuge acts as a local quality filter for European customers, combining availability from Emmerich with technical counselling so that the cutter body can be matched to the correct insert grade and machining strategy. For tailored advice on integrating the HF10TM into existing tool cycles, contact Metav Werkzeuge for product availability and recommended insert grades – phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: HF10TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core figures Diameter: 20 mm Shank diameter: 20 mm Cutting height: 28 mm Overall length: 150 mm Number of cutting edges: 6 Weight: 0.326 kg Torx screw: M2,5x5,5 Torx key size: T08 Special features For indexable inserts APKT 1003 Compatible insert manufacturer: Korloy Indexable cutter body design Compact form factor for small holders FAQ What inserts fit this cutter body? The HF10TM is designed for APKT 1003 indexable inserts; Korloy variants are compatible and commonly used with this cutter body. What is the shank diameter and why does it matter? The cutter has a 20 mm shank, which enables use in compact toolholders and helps maintain rigidity for short to moderate overhangs. How many cutting positions are available before replacement? The body accepts inserts arranged to provide six cutting edges, allowing multiple indexings to extend tool life before full replacement. Is the HF10TM suitable for CNC machining centres? Yes, the HF10TM’s indexable design, 20 mm shank and straightforward clamping make it suitable for integration into CNC machining centres for light to medium milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-oriented clamping solution that combines compatibility with OFCR 07, a lightweight 0.1 kg construction and robust manufacture by Teknik Makina for smooth measurement routines; order the clamping accessory directly via Metav Werkzeuge or consult the team for application advice. Clamping Jaw BK300TM — compact clamping accessory with OFCR 07 compatibility (Teknik Makina) The Clamping Jaw BK300TM is a compact accessory designed for precision calipers and small measurement setups, providing reliable holding and repeatable positioning for fine metrology tasks. Compact clamping jaw for precision calipers Compatible with OFCR 07 caliper models Lightweight at only 0.1 kg Robust manufacturing by Teknik Makina Secure, precision clamping that reduces setup variability The accessory delivers secure clamping for repeatable measurements, translating into fewer re-measures and improved process reliability. Fitted to precision calipers it ensures consistent contact and an even reference point, so measurement variance is minimised. Thanks to its explicit compatibility with OFCR 07, integration into existing inspection routines is straightforward, reducing machine downtime and speeding up cycle times while maintaining the required precision for workshop and small-scale metrology applications. Compact design for ergonomic handling and efficient workflows With a lightweight construction of 0.1 kg, the component is easy to position and manoeuvre during setup, which reduces handling time and fatigue in frequent-use environments. The compact footprint makes it suitable where bench space is limited, enabling close-proximity measurement without obstructing other tools. The small mass also lowers inertia during manual adjustments, contributing to safer and more controlled clamping actions in everyday shop-floor use. Practical choice for measurement chains and inventory planning As a simple, robust clamping accessory from Teknik Makina, the item supports standardised measurement chains and makes inventory planning more predictable. The straightforward function and limited set of technical variables means the component can be specified with confidence for repeatable tasks. Combined with Metav’s role as a quality filter for the European market, procurement teams gain access to a dependable supply channel that addresses both workshop demands and the need for consistent metrological performance. Contact Metav Werkzeuge for stock and tailored advice on the Teknik Makina clamping jaw BK300TM — expert assistance and fast availability are provided from the Emmerich site, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: BK300TM ECLASS: 21189290 Weight: 0.1 kg Brand: Teknik Makina Facts Compatibility: OFCR 07 caliper SKU: BK300TM Special features Clamping accessory for precision measurement Compact form factor Manufactured by Teknik Makina FAQ What calipers is the clamping jaw compatible with? The clamping jaw is compatible with OFCR 07 calipers; the BK300TM was specified to mate with that model for secure positioning. Is the BK300TM suitable for continuous shop-floor use? Yes, the BK300TM is designed as a robust clamping accessory suitable for routine workshop and metrology tasks where repeatable holding is required. What is the weight and how does it affect handling? The accessory weighs 0.1 kg, which makes handling and fine positioning easier and reduces user fatigue during frequent set-ups. Does the product require special tools for installation? Installation of the clamping jaw is intended to be straightforward for standard caliper fittings; the BK300TM integrates with OFCR 07 without special adapters. Which manufacturer produces this clamping accessory? Teknik Makina produces the component; the item is supplied via Metav Werkzeuge for distribution in Europe. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com