Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact combination of stable machining and efficient coolant delivery that reduces tool wear and maintains process reliability; order via Metav Werkzeuge or consult the team for application-specific advice. Schaftfräser – 32 mm shank, internal coolant (Teknik Makina) The Schaftfräser is a 32 mm shank milling cutter designed for use with AP-- 1604 indexable inserts, intended for industrial milling where reliable chip evacuation and rapid insert changes are required. 32 mm shank diameter Internal coolant supply Compatible with AP-- 1604 inserts Three cutting edges for stable machining Stable performance with dedicated coolant feed Equipped with an integrated internal coolant channel, this shank milling cutter ensures directed coolant delivery to the cutting zone, which improves tool life and chip evacuation under higher material removal rates. The combination of a 32 mm shank and a 150 mm overall length provides a balance between reach and rigidity; the targeted coolant flow further reduces heat build-up, keeping cutting edges sharper for longer and enabling consistent cycle times on series production runs. Precision and rigidity for repeatable results The tooling accepts AP-- 1604 indexable inserts in a three‑insert configuration, giving a favourable tool geometry for smooth cutting forces and reduced vibrations. With a 55 mm cutting length and an overall weight of 0.876 kg, the assembly offers predictable deflection characteristics; this is particularly beneficial when maintaining tight tolerances or when working with hard-to-machine components where stability directly translates into fewer rejects and less rework. Fast servicing and straightforward consumables handling Insert retention uses a Torx T15 drive and M4x10 screws, allowing quick, repeatable insert changes with standard workshop tools and minimising downtime during tool replacement. The tool is supplied under SKU S270-1TM, making reorders and tool management straightforward for procurement systems. Compatibility with Korloy AP-- 1604 inserts ensures broad availability of grade and geometry options to match different materials and cutting strategies. Practical fitment and machining guidance Designed as a shank-mounted cutter for use in milling holders and conventional toolholders, the cutter's dimensions and balanced insert arrangement support use on both horizontal and vertical machining centres. The internal coolant channel is particularly effective when machining abrasives or when chip control is critical. For process setup, start with conservative cutting parameters and increase feeds as stability and surface finish confirm the chosen setup is suitable. Discuss Teknik Makina's 32 mm shank milling solution with Metav Werkzeuge to match the S270-1TM to specific workpieces and machine capabilities, ensuring an efficient and robust machining process. Technical data SKU: S270-1TM Label: 32mm Schaftfräser AP-- 1604 L150mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 32 mm Overall length: 150 mm Shank diameter: 32 mm Cutting length: 55 mm Number of inserts: 3 Weight: 0.876 kg Special features Internal coolant Compatible with AP-- 1604 indexable inserts Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this cutter? The cutter accepts AP-- 1604 indexable inserts; compatible inserts from Korloy are suitable for the mounting and geometry of this shank milling cutter. Does the tool provide internal coolant? Yes, internal coolant is integrated into the design to supply coolant directly to the cutting zone, improving tool life and chip evacuation for the S270-1TM. What is the usable cutting length? The tool offers a cutting length of 55 mm, providing a balance between reach and rigidity for stable machining operations. Which drive and screws are required for insert changes? Insert retention uses a Torx T15 drive and M4x10 screws to secure the AP-- 1604 inserts, enabling quick and repeatable servicing. Is this suitable for high-feed operations? The combination of a 32 mm shank and three-indexable inserts, together with directed coolant, supports increased feed rates where machine rigidity and correct parameter selection allow. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, ISO‑designated turning solution that combines precise insert compatibility and robust support for repeatable right‑hand machining; benefit from a 150 mm overall length and DDHNR 2525 interchangeability and contact Metav Werkzeuge for application advice or procurement. Clamping holder DDHN (for DN-- 1506 indexable inserts) — Teknik Makina, right‑hand, 150 mm The Clamping holder DDHN is a right‑hand turning toolholder designed for DN-- 1506 indexable inserts, intended for dependable medium‑duty turning operations in workshop and production environments. Right‑hand turning orientation Compatible with DN-- 1506 inserts 150 mm overall length for stability Consistent rigidity and precise insert fit for repeatable turns The holder is engineered to deliver consistent rigidity through a compact yet stable geometry that supports repeatable machining cycles. With an overall length of 150 mm and a mass of 0.753 kg, the assembly offers a balanced compromise between reach and vibration damping. The ISO designation DDHNR 2525 indicates a standardised shank form that ensures secure clamping and straightforward integration into existing toolpost arrangements. By matching classic industrial dimensions with a clear insert seating, the design reduces tool movement during cuts and contributes to predictable surface finish and tool life. Optimised cutting geometry and working heights for efficient chip control A defined cutting angle of 107.5° and cutting height of 33 mm position the insert for efficient engagement and controlled chip formation on right‑hand cuts. The toolhead dimensions — head width 32 mm and holder width 25 mm — create a stable support plane for the indexable insert, improving contact area and heat dissipation during interrupted or continuous cuts. Compatibility with DN-- 1506 inserts allows selection of grades and coatings appropriate to the workpiece and process, while the right‑hand orientation simplifies setup for standard lathe configurations. These characteristics translate into faster process stabilisation and reduced rework. Practical mounting, interchangeability and workshop applications Mounting and interchangeability have been prioritised: the holder accepts inserts in the DN-- 1506 family and uses a M15 shank thread for secure attachment to the toolpost or adapter. The nominal holder height of 25 mm ensures alignment with typical tool heights used in medium‑duty turning, reducing the need for shims. This toolholder is suitable for workshops seeking a reliable indexable solution for general turning tasks, where ease of insert replacement and adherence to ISO shank standards support predictable machine time and simplified tool management. For shops requiring component‑level consistency, this holder integrates cleanly into existing tool sets and process documentation. For tailored application advice or availability enquiries of this Teknik Makina clamping holder (DDHN for DN-- 1506), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and ordering assistance. Technical data Article number: D097TM Brand: Teknik Makina Description: Clamping holder DDHN for DN-- 1506 indexable inserts ISO designation: DDHNR 2525 Facts Overall length: 150 mm Weight: 0.753 kg Cutting height: 33 mm Holder height: 25 mm Head width: 32 mm Holder width: 25 mm Cutting angle: 107.5° Cutting direction: right Special features Compatible with DN-- 1506 indexable inserts Shank thread: M15 Suitable for right‑hand turning applications FAQ What inserts does this holder accept? The clamping holder DDHN is compatible with DN-- 1506 indexable inserts and accepts common grades suited to turning operations. Is the orientation suitable for standard right‑hand turning? Yes, the toolholder is specified for right‑hand turning and is intended for conventional lathe set‑ups. Which ISO shank designation applies to this toolholder? The holder corresponds to DDHNR 2525, indicating the standard shank form for integration into ISO‑compliant tooling systems. What are the key dimensions affecting stability? Important dimensions are the 150 mm overall length, 33 mm cutting height and 32 mm head width, which together influence reach and stability during cuts. How is the holder mounted to the toolpost? Mounting uses the specified shank interface and a M15 thread for secure fastening; check the machine adapter compatibility before mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, left‑hand clamping system that accepts common VBMT 1604 indexable inserts for controlled engagement and low vibration; combine robust shank dimensions with a precise 107.5° cutting angle for improved surface finish and predictable tool life — order the holder directly via Metav Werkzeuge or consult our specialists for integration into existing toolrooms. SVHBL 2525 clamping holder — left‑hand, for VBMT 1604 SVHBL 2525 clamping holder designed for left‑hand turning operations, compatible with VBMT 1604 indexable inserts and intended for secure, repeatable mounting in workshop and production lathes. Left‑hand cutting orientation Compatible with VBMT 1604 inserts ISO SVHBL 2525 shank for secure fit 150 mm overall length for stable reach Consistent chip control for reliable turning The combination of a 107.5° cutting angle and acceptance of VBMT 1604 indexable inserts delivers predictable engagement at the cutting edge, which assists in consistent chip control and reduces the risk of unexpected chatter. The geometry encourages a balanced cut entry and exit, translating into more stable tool life and fewer interrupted cycles in serial turning operations. For workshops seeking reproducible results, the geometry of this clamping system is a practical choice. Rigidity and repeatability at the toolpost A 25 mm shank height with a matching 25 mm shank width, paired with a 32 mm cutting‑head width, ensures the holder provides substantial rigidity under load. The construction and mass (approx. 0.712 kg) help to damp vibrations, improving surface finish and repeatability between setups. The robust mounting dimensions are particularly beneficial when performing heavier cuts or when tighter tolerances are required on turned components. Faster changeovers and secure fastening Engineered for compatibility with standard tooling, the holder’s ISO SVHBL 2525 designation simplifies procurement and interchangeability across toolrooms. The clamping interface uses an M16 fastening specification for reliable clamp force and straightforward maintenance procedures. Reduced fiddling at the toolpost and clear interface standards shorten downtime and support a leaner machining workflow. Practical deployment and workshop compatibility With an overall length of 150 mm the holder reaches into deeper set‑ups while maintaining stability at the cutting point, making it suitable for general turning tasks where left‑hand orientation is required. The component’s balanced design is suited to production and job‑shop environments that employ indexable inserts for economic tool management. The product is supplied as a ready‑to‑mount clamping solution compatible with commonly stocked VBMT inserts. For tailored advice on integrating the Teknik Makina SVHBL 2525 clamping holder into existing turning operations or to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich for reliable delivery and specialist guidance — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: D356-2TM Manufacturer: Teknik Makina ISO designation: SVHBL 2525 Weight: 0.712 kg Overall length: 150 mm Facts Shank height: 25 mm Shank width: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Cutting angle: 107.5° Special features Compatible inserts: VBMT 1604 Cutting direction: left Clamping thread: M16 FAQ What insert type fits this clamping holder? The holder is compatible with VBMT 1604 indexable inserts; the geometry is matched to that insert form for secure seating and correct cutting engagement. Is the cutting direction left or right? This clamping holder is configured for left‑hand cutting direction, suitable for operations that require a left‑hand tool orientation. What are the shank dimensions and how do they affect stability? The shank measures 25 mm in height and 25 mm in width; these dimensions contribute to increased rigidity and improved vibration damping during turning. Which fastening thread is required for clamping? The unit uses an M16 clamping thread to achieve stable clamp force and consistent repeatability at the toolpost. Can this holder reach deeper setups without loss of stability? With an overall length of 150 mm and a robust cutting‑head width, the holder combines reach with stiffness to maintain stable cutting conditions in extended setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable choice for turning operations: the SVHCR 2525 clamping holder combines secure insert seating, a 107.5° approach angle and a rigid 25 mm shank to deliver stable right-hand cuts; order directly via Metav Werkzeuge or consult our specialists for compatibility advice. SVHCR 2525 clamping holder — Right-hand turning holder for VCMT 1604 indexable inserts (Teknik Makina) SVHCR 2525 clamping holder is a right-hand turning tool designed to accept VCMT 1604 indexable inserts, providing a 107.5° geometry for controlled cutting in general turning applications. Right-hand turning holder Fits VCMT 1604 indexable inserts 25 mm shank height for rigid mounting 107.5° approach angle for stable cuts Consistent stability for reliable turning performance The SVHCR 2525 clamping holder delivers rigid support for indexable inserts, translating into predictable chip formation and repeatable dimensional results. With a 25 mm shank height and a total length of 150 mm, the holder minimises overhang and deflection, allowing higher feed rates and improved surface finish. The right-hand orientation and the 107.5° approach angle are optimised to reduce radial cutting forces, which helps maintain tool life and machining consistency across series production. Simple compatibility and secure clamping explained Designed for VCMT 1604 insert geometry, the holder uses an M16 clamping interface for the tool screw, ensuring firm seating of the insert and straightforward replacement. The clamping concept avoids complex setup procedures: the insert locates in the pocket, the screw is tightened to secure the seat, and the component is ready for operation. This straightforward method makes the holder suitable for both experienced shops and those expanding their turning capability, reducing machine downtime during insert changes. Geometry that reduces vibration and extends component life The head width of 32 mm and a cutting height of 30 mm create a compact, robust front end that resists chatter during interrupted cuts or heavy cross-sections. At a mass of 0.707 kg, the toolholder provides sufficient inertia to dampen minor tool oscillations without compromising nimble handling on the turret. The combination of compact head dimensions and a conservative 107.5° cutting angle results in a balance between cutting aggression and stability, which improves repeatability and prolongs both insert and holder service life. Where and how this holder works best This right-hand clamping holder is intended for general turning tasks on lathes and turning centres where VCMT 1604 inserts are preferred for medium to finishing passes. Its construction supports typical steel and alloy turning operations where a controlled approach angle yields consistent part tolerances. When mounting, ensure the turret seat accepts a 25 mm shank, verify the M16 clamping screw engagement and confirm the insert type — this prepares the setup for efficient production cycles with reduced rework. The SVHCR 2525 offers a practical solution for workshops seeking straightforward toolholding without sacrificing machining stability. Choose the SVHCR 2525 clamping holder from Teknik Cutting Tools and contact Metav Werkzeuge for expert compatibility advice and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D256TM Model designation ISO: SVHCR 2525 Compatible inserts: VCMT 1604 Manufacturer: Teknik Makina Facts Shank height: 25 mm Head width: 32 mm Holder width: 25 mm Cutting height: 30 mm Total length: 150 mm Weight: 0.707 kg Cutting angle: 107.5° Cutting direction: right Clamping screw/thread designation: M16 Special features Right-hand turning holder design Accepts indexable VCMT 1604 inserts Robust front geometry for reduced vibration M16 clamping interface for secure insert seating FAQ What inserts are compatible with this holder? The SVHCR 2525 clamping holder accepts VCMT 1604 indexable inserts, which seat in the pocket and are secured via the M16 clamping interface. Is this holder suitable for left-hand turning? No, this toolholder is manufactured for right-hand cutting; its geometry and cutting angle are optimised for right-hand turning operations. What are the critical dimensions to check before purchase? Confirm turret shank accommodation for a 25 mm shank height and sufficient clearance for the 150 mm overall length; these dimensions are key for correct fitment of the SVHCR 2525. How does the 107.5° approach angle affect machining? The 107.5° approach angle moderates radial cutting forces, improving stability and surface finish during turning, which helps to reduce tool wear and scrap rates. Can the holder be used for heavy roughing passes? The holder’s compact head and 32 mm width provide good rigidity for many finishing and medium-duty operations; for heavy roughing, assess machine power, clamping and insert grade before proceeding with aggressive parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO‑compliant clamp holder that delivers stable clamping and reliable left‑hand external threading; its compatibility with 16 IR indexable inserts and robust 25 × 25 mm head make it a practical choice for repetitive turning operations. Order the tool directly via Metav Werkzeuge or consult our specialists for application support. Clamp holder (Klemmhalter) – left‑hand external thread, compatible with 16 IR inserts by Teknik Makina Clamp holder (Klemmhalter) for precision external threading and secure mounting of indexable inserts in turning lathes Suitable for 16 IR indexable inserts Left-hand cutting orientation 25 × 25 mm head dimensions 150 mm overall length, 0.754 kg weight Consistent, vibration‑resistant clamping that improves thread quality The clamp holder is designed for secure clamping of 16 IR indexable inserts, reducing micro‑movement at the tool tip and improving thread form consistency. With head dimensions of 25 × 25 mm and a cutting edge height of 30 mm, the component offers a rigid interface between insert and holder; this rigidity helps to maintain tool geometry under cutting forces, which in turn reduces rework and scrap. The ISO AL 2525 designation ensures familiar mounting and interchangeability in standard turret or tool post setups, making integration into existing turning centres straightforward. Optimised for left‑hand external threading and efficient tool changes Engineered for left‑hand cutting operations, this holder is tailored to external threading tasks where reversed orientation is required. Compatibility with 16 IR indexable inserts simplifies tool inventory management: a single insert family covers a wide range of thread profiles and materials. The toolholder’s compact 150 mm overall length balances reach with stiffness, while a mass of 0.754 kg contributes to stable dynamic behaviour during interrupted cuts. Quick access to the clamping screw and straightforward insert seating minimise changeover time and support higher machine uptime. Practical benefits for workshop and production environments In production contexts where repeatability matters, the holder’s measured proportions — a 25 mm head width and matching height — allow consistent setup and simple reference to preset offsets on the machine. The construction focuses on durability and operational clarity rather than unnecessary complexity: a proven mounting geometry and standardised insert seat reduce setup errors and training time. The result is a toolholder that supports efficient cycle times and predictable part quality, so production planners can forecast throughput with greater confidence. Integration advice and recommended uses The clamp holder is primarily intended for external threading on lathes and turning centres using 16 IR indexable inserts and an ISO AL 2525 mounting standard. It is best paired with inserts selected for the workpiece material and thread profile; for example, a coated grade for tough steels or a tougher substrate for interrupted cuts. When specifying the holder for a machine, confirm turret aperture and insert seat compatibility. For application optimisation and insert recommendations, Metav’s technical advisors can advise on insert grades and cutting parameters. For tailored advice on using this Teknik Cutting Tools clamp holder (SKU D269TM) for left‑hand external threading, contact Metav Werkzeuge in Emmerich for quick supply and technical support: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D269TM Brand: Teknik Makina Product name: Clamp holder (Klemmhalter) Intended application: for outside thread ISO designation: AL 2525 Facts Head height: 25 mm Head width: 25 mm Cutting head width: 25 mm Cutting edge height: 30 mm Overall length: 150 mm Weight: 0.754 kg Compatible inserts: 16 IR Cutting direction: left Special features For indexable inserts 16 IR ISO AL 2525 mounting Designed for external threading Quick‑access clamping screw Robust toolholder profile for reduced vibration FAQ What insert size is compatible with this clamp holder? The clamp holder is compatible with 16 IR indexable inserts; this family covers common threading and turning geometries for external threads. Can the holder be used for right‑hand threads? This specific item is configured for left‑hand cutting orientation; for right‑hand applications, a right‑hand version or mirrored mounting should be selected. What is the overall length and how does it affect stiffness? The overall length is 150 mm; this moderate reach balances accessibility with stiffness to reduce deflection during threading operations. Is the holder suitable for heavy interrupted cuts? The holder’s robust 25 × 25 mm head and secure clamping are designed to reduce vibration and support interrupted cuts when paired with an appropriate insert grade. What standard does the toolholder follow for mounting? The toolholder follows the ISO AL 2525 designation, facilitating interchangeability in many turret and tool post systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Klemmhalter – Klemmhalter 150 mm (SKU P097TM) Der Klemmhalter dient der sicheren Werkzeugspannung bei Drehbearbeitungen und überzeugt durch seine 150 mm Länge sowie den definierten 30° Schnittwinkel für stabile Spanbildung. 150 mm Länge für stabile Werkzeugspannung Breite 25 mm, Höhe 25 mm für standardisierte Aufnahmen ISO-Bezeichnung 2525 für genormte Klemmaufnahmen 30° Schnittwinkel für kontrollierte Spanabnahme Präzise Spannkraft für effiziente Zerspanung Der Klemmhalter liefert eine konstante Klemmkraft, die rüstzeiten reduziert und Prozessstabilität erhöht. Durch die 150 mm Ausführung lassen sich längere Werkzeugüberstände sicher aufnehmen, was bei Außen- und Planbearbeitungen die Einspannflexibilität verbessert. Die definierte Geometrie trägt dazu bei, Vibrationen zu minimieren und so Werkzeugstandzeiten zu verlängern. Normkonforme Abmessungen für einfache Integration Mit den Maßen 25 mm Breite und 25 mm Höhe entspricht der Halter gängigen Aufnahmemaßen und lässt sich nahtlos in bestehende Haltersysteme einfügen. Die ISO 2525-Bezeichnung kennzeichnet die Kompatibilität mit standardisierten Spannsystemen und vereinfacht die Auswahl passender Aufnahmen und Adapter. Dadurch reduziert sich der Abstimmungsaufwand bei der Maschinenbestückung. Einsatz und Montagekomfort in der Werkstatt Die Ausführung mit 30° Schnittwinkel ermöglicht sowohl Schrupp- als auch Schlichtoperationen bei kontrollierter Spanabfuhr. Die Montage erfolgt über standardisierte Schraubverbindungen; dadurch ist ein schneller Wechsel und eine reproduzierbare Spannlage möglich. Für Anwender, die Wert auf zuverlässig planbare Fertigungsprozesse legen, bietet der Klemmhalter eine robuste und wartungsarme Lösung. Empfehlung: Für präzise Spannaufgaben empfiehlt sich der Klemmhalter von Teknik Makina (SKU P097TM) – verfügbar über Metav, Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: P097TM Marke: Teknik Makina Produktart: Klemmhalter ISO-Bezeichnung: 2525 Daten Gesamtlänge: 150 mm Breite: 25 mm Höhe: 25 mm Schnittwinkel: 30° Gewicht: 0,594 kg Besonderheiten ISO 2525: standardisierte Klemmaufnahme 30° Schnittwinkel: geeignet für Schrupp- und Schlichtschnitte Maße: 25 x 25 mm Aufnahmeraum FAQ Ist der Klemmhalter mit ISO-Standardaufnahmen kompatibel? Ja, der Klemmhalter ist unter der ISO-Bezeichnung 2525 geführt und lässt sich somit in Systemen mit standardisierten Klemmaufnahmen einsetzen. Welche Länge hat das Werkzeug und welche Bedeutung hat das für die Anwendung? Die Gesamtlänge beträgt 150 mm; diese Länge erlaubt längere Werkzeugüberstände bei stabiler Einspannung und erhöht die Flexibilität bei Außenbearbeitungen. Welchen Schnittwinkel hat der Halter und wofür ist dieser vorteilhaft? Der Klemmhalter verfügt über einen 30° Schnittwinkel, der eine kontrollierte Spanbildung fördert und sich für Schrupp- sowie Schlichtaufgaben eignet. Unter welcher Artikelnummer ist der Halter gelistet? Der Halter ist unter der Artikelnummer P097TM gelistet und wird von Teknik Makina gefertigt. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid toolholder that combines precise clamping with broad compatibility: the left-hand SRGC design accommodates RCMT 0803 inserts, features a 25 x 25 mm shank and a 150 mm overall length for reliable reach in turning operations. Order via Metav Werkzeuge or consult the technical advisers for application-specific guidance. Clamp holder SRGC (SRGCL 2525) – left-hand toolholder for RCMT 0803 inserts, 150 mm by Teknik Makina A clamp holder SRGC engineered for left-hand turning and compatible with RCMT 0803 indexable inserts, optimised for stable clamping and straightforward integration into standard toolposts Left-hand cutting orientation Compatible with RCMT 0803 inserts 25 x 25 mm shank and 150 mm overall length 30° approach angle for controlled cutting forces Consistent clamping for predictable machining results The SRGC clamp holder delivers repeatable clamping by combining a standard ISO designation (SRGCL 2525) with a secure screw interface (clamping thread M08). This results in steady insert positioning and reduces vibration during cuts, which in turn improves surface finish and dimensional control. The holder’s mass (approx. 0.71 kg) contributes to stability without compromising machine balance, making it suitable for medium-duty turning tasks where consistent results matter. Fast set-up and compatibility reduce downtime Designed to accept RCMT 0803 indexable inserts, the toolholder fits seamlessly into existing setups that use a 25 x 25 mm shank. The 150 mm overall length provides necessary reach for conventional toolposts while the compact head dimensions (cutting head width 32 mm, cutting height 30 mm) keep interference to a minimum. This compatibility shortens changeover times and simplifies inventory management by allowing familiar inserts to be used across multiple holders. Controlled cutting geometry for efficient turning An approach angle of 30° combined with the left-hand orientation helps to direct cutting forces predictably, which supports secure chip formation and tool life extension. The holder’s geometry is tuned for common indexable insert applications, offering a balance between cutting efficiency and robustness. The practical result is fewer interruptions for tool checks and smoother production cycles, supporting reliable throughput on small to medium turning operations. Contact Metav Werkzeuge for technical advice and supply of the Teknik Cutting Tools SRGC clamp holder (SKU D294TM); phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D294TM ISO designation: SRGCL 2525 Compatible inserts: RCMT 0803 Cutting direction: left Dimensions & weights Shank dimensions: 25 x 25 mm Cutting head width: 32 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.71 kg Cutting angle: 30° Clamping & compatibility Clamping screw: M08 Insert type: RCMT 0803 Suitable for indexable inserts Left-hand cutting orientation FAQ Which inserts are compatible with this holder? The SRGC clamp holder is compatible with RCMT 0803 indexable inserts; Teknik Cutting Tools supplies the holder under SKU D294TM. Is the holder left-hand or right-hand? This toolholder is made for left-hand cutting orientation, intended for operations where the tool must cut from the left side. What are the shank and overall dimensions? Shank size is 25 x 25 mm with an overall length of 150 mm and a cutting head width of 32 mm for controlled access in turning applications. What clamping screw does the holder use? Clamping is effected with an M08 screw, delivering secure retention for the RCMT 0803 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining robust toolholding with standardised insert compatibility and compact dimensions, the SRDCN 2525 clamping holder delivers consistent turning performance and simplifies tooling inventory. Benefit from a secure M16 clamping arrangement, a 150 mm overall length and a stable 25 mm shank width — order directly via Metav Werkzeuge or contact our consultants for application guidance. Clamping Holder SRDCN 2525 — for RCMT 1606 indexable inserts, 150 mm overall length (Teknik Makina) A Clamping Holder SRDCN 2525 engineered for neutral-direction turning applications; designed to accept RCMT 1606 indexable inserts and to integrate smoothly with standard lathe toolposts Secure clamping for RCMT 1606 indexable inserts Neutral cutting direction for versatile turning 150 mm overall length with 25 mm shank width Stable clamping for consistent turning accuracy The holder is designed to provide secure clamping of RCMT geometry inserts, reducing micro-movement and improving repeatability during interrupted cuts. The integrated M16 arrangement keeps the insert pocket tight under load, which translates into steadier surface finishes and fewer re-cuts. For production or workshop environments that demand predictable results, the combination of a firm clamping mechanism and standardised insert compatibility supports reliable machining cycles and reduced setup time. Compact dimensions that fit tight toolposts With an overall length of 150 mm, a 25 mm shank width and a 12.5 mm cutting-head width, the toolholder occupies minimal space on the toolpost while maintaining adequate rigidity. The 35 mm cutting height positions the insert at a stable centreline, and the modest mass of 0.701 kg helps to reduce toolpost loading on smaller lathes. These compact dimensions make the holder particularly useful where short overhang and controlled springiness are required, enabling closer tolerances and easier tool changes without sacrificing stability. Neutral cutting geometry for broad shop flexibility The neutral cutting direction provides a universally applicable tool orientation, suitable for a wide range of turning tasks where left- or right-handed specific holders are impractical. Using a neutral toolholder reduces the number of specialised items in stock and simplifies tool planning across mixed jobs. This geometry supports straightforward indexable-insert replacement and allows the same holder to be redeployed across different operations, enhancing shop-floor flexibility and lowering tooling complexity. Standardisation and workshop integration for efficient workflows Carrying the ISO-style designation SRDCN 2525, the holder aligns with standard insert and holder conventions to ease procurement and mounting procedures. Compatibility with RCMT 1606 inserts ensures readily available cutting grades and geometries can be fitted as task demands change. The standardised form factor and straightforward clamping means setup routines are predictable and training time for operators is reduced, supporting consistent cycle times and smoother production planning. For tailored advice on the Teknik Cutting Tools SRDCN 2525 clamping holder and reliable supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and procurement assistance Technical Data Article number: D273TM Manufacturer: Teknik Cutting Tools Type designation: SRDCN 2525 Suitable for: RCMT 1606 indexable inserts Cutting direction: neutral ECLASS: 21181004 Facts Overall length: 150 mm Shank width: 25 mm Cutting-head width: 12.5 mm Holder height: 25 mm Cutting height: 35 mm Weight: 0.701 kg Design / Special features M16 clamping screw ISO designation SRDCN 2525 Compatible with RCMT insert geometry Neutral-direction toolholder for turning FAQ Which insert type fits this holder? The holder accepts RCMT 1606 indexable inserts; the SRDCN 2525 configuration ensures correct seating for RCMT geometry. Is the neutral cutting direction suitable for mixed turning tasks? Yes — the neutral orientation provides a versatile tool geometry that can be redeployed for a variety of turning operations without left- or right-specific constraints. What are the key dimensions to check for toolpost compatibility? Key dimensions are 150 mm overall length, 25 mm shank width and 35 mm cutting height; weight is 0.701 kg, and cutting-head width is 12.5 mm. What clamping thread is used for the insert screw? The clamping arrangement uses an M16 interface to secure the insert pocket and maintain rigidity during cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the firm clamping and proven ISO designation for repeatable turning results; the combination of a 25 x 25 mm shank and 150 mm overall length delivers rigidity and reach for standard workshop lathes. Order the clamp holder directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter SVVBN 2525 – Tool holder for VBMT indexable inserts, 25 x 25 mm, Teknik Makina The Klemmhalter SVVBN 2525 is a robust clamp holder engineered for turning operations with VBMT 1604 indexable inserts, offering stable tool support and straightforward setup for general workshop use SVVBN 2525 shank 25 x 25 mm Compatible with VBMT 1604 indexable inserts 150 mm overall length for enhanced reach M16 clamping thread for secure fixing Increased rigidity for consistent turning and surface finish The SVVBN-style clamp holder delivers enhanced rigidity, primarily through its 25 x 25 mm shank, which reduces vibration at the cutting edge and helps to maintain repeatable geometry. For operations where dimensional consistency matters, a stiffer toolholder translates directly into improved surface finish and extended insert life. This stability is particularly beneficial in batch production or when turning medium-duty components where chatter can compromise tolerances. Designed for quick fitting and reliable insert seating Compatibility with VBMT 1604 indexable inserts and an ISO designation of SVVBN 2525 ensures predictable seating and orientation of the cutting edge. The holder’s M16 clamping thread provides a positive fixation method that facilitates rapid assembly and secure retention under cutting forces. Clear mechanical interfaces mean changeovers are efficient, reducing setup time and keeping machine uptime high. Practical reach and workshop resilience for everyday use With an overall length of 150 mm and a cutting-head width of 12.5 mm, this tool holder balances reach with stiffness for typical lathe centres. The specified cutting height of 40 mm and a cutting angle of 72.5° define the geometric relationship to the insert, helping set predictable chip flow and cutting behaviour. Constructed for routine workshop environments, the holder’s proportions support common turning tasks without excessive overhang, contributing to safer, more reliable machining cycles. Contact Metav Werkzeuge to discuss application details for the SVVBN 2525 clamp holder and to secure supply from our Emmerich location. Technical data Article number: D140TM Manufacturer: Teknik Makina Product name: Klemmhalter SVVBN 2525 Facts Shank width: 25 mm Shank height: 25 mm Cutting-head width: 12.5 mm Cutting height: 40 mm Overall length: 150 mm Weight: 0.668 kg Cutting angle: 72.5° Clamping thread: M16 Special features ISO designation: SVVBN 2525 For indexable inserts: VBMT 1604 Indexable insert type: SVVBN for VBMT FAQ What inserts fit this holder? The holder is intended for VBMT 1604 indexable inserts and seats the VBMT geometry reliably for standard turning tasks. Is the SVVBN 2525 suitable for long overhangs? The SVVBN 2525 offers a 150 mm overall length; while it provides moderate reach, minimising overhang will preserve rigidity and surface finish. How is the insert clamped in the holder? The toolholder uses an M16 clamping thread to secure the insert assembly, providing a stable mechanical fixation under cutting loads. Can this holder be used for finishing operations? Yes. The holder’s stiffness and the 72.5° cutting angle make it appropriate for many finishing passes where consistent chip control and surface quality are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of precise geometry and reliable clamping for consistent turning results; the SVVCN toolholder delivers secure seating for VCMT inserts and straightforward integration into standard tool posts — order directly via Metav Werkzeuge or consult the specialists for application matching. Klemmhalter SVVCN 2525 — Toolholder for VCMT 1604 inserts by Teknik Makina The Klemmhalter SVVCN 2525 is a robust toolholder designed for turning with VCMT indexable inserts, offering a neutral cutting direction and standardised ISO geometry for workshop use. SVVCN 2525 toolholder geometry 25 mm shank and 25 mm height Compatible with VCMT 1604 inserts Neutral cutting direction, 72.5° angle Reliable turning performance for everyday production The holder’s neutral cutting direction and a flank 72.5° approach angle create a balanced cutting condition that is suited to a wide range of turning tasks. With a 25 mm shank and a standard 25 mm height, the component provides stable support in the tool post, reducing vibration and improving repeatability. This results in measurable improvements in surface quality and tool life when compared with underspecified clamping solutions, particularly in mixed-batch or jobbing environments where predictable performance is essential. Secure clamping and simple insert handling Designed for VCMT 1604 inserts, the clamping concept ensures consistent seating and repeatable indexation. The clamping screw interface uses an M16 thread that allows reliable torque transmission and straightforward replacement of cutting tips. Clear seat geometry reduces the risk of incorrect insert seating and minimises setup time at the lathe, thereby supporting efficient changeovers and more consistent dimensional results during serial and individual part production. Fits standard workflows and reduces setup time With an overall length of 150 mm and a mass of 0.675 kg, the holder balances compactness with sufficient overhang for typical turning setups. The ISO designation SVVCN 2525 ensures compatibility with established tool posts and quick-change systems, facilitating rapid integration into existing tool inventories. The compact cutting-head width of 12.5 mm and a cutting height of 40 mm make the component suitable for confined workspaces while maintaining accessibility for inspection and insert replacement. Robust design focused on uptime and economy The SVVCN geometry supports repeatable clamping without frequent readjustment, making it a practical choice where throughput and reliability are priorities. Use of indexable inserts minimises tooling costs over time, since only the insert is replaced rather than the whole toolbody; this supports a lower total cost of ownership in routine turning operations. The holder’s neutral configuration and standardised interfaces also simplify tool management across multiple machines, aiding parts planning and inventory control. Contact Metav Werkzeuge for technical matching, supply options and rapid delivery of Teknik Cutting Tools SVVCN 2525 toolholders (SKU D152TM) Technical Data Article number: D152TM Model (ISO): SVVCN 2525 Manufacturer: Teknik Makina Dimensions & weights Overall length: 150 mm Shank width: 25 mm Holder height: 25 mm Cutting-head width: 12.5 mm Cutting height: 40 mm Weight: 0.675 kg Cutting angle: 72.5° Direction: neutral Compatibility & features Suitable for VCMT 1604 inserts Clamp thread: M16 ISO designation: SVVCN 2525 Suitable for indexable inserts Neutral cutting direction FAQ What inserts fit this toolholder? The holder is specified for VCMT 1604 indexable inserts and the seating geometry is matched to that family for reliable clamping and correct rake/clearance. Is the SVVCN 2525 suitable for heavy roughing cuts? The SVVCN 2525 (Teknik Makina, SKU D152TM) has a neutral cutting configuration; suitability for heavy roughing depends on machine power and insert grade rather than the holder alone. How is the insert secured in the clamping seat? Insert clamping is achieved via the M16 screw interface which provides consistent torque transfer and stable seating for repeatable tool life. Can the holder be used in existing quick-change tool posts? The ISO geometry and SVVCN 2525 designation permit integration with standard tool posts and many quick-change systems, easing retrofit and replacement tasks. What benefits does the neutral cutting direction provide? Neutral cutting reduces directional tool load bias and is often preferred for general turning tasks where symmetric chip flow and consistent edge wear are desired. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of rigid clamping geometry, precise 93° cutting angle and direct compatibility with DN-- 1504 indexable inserts for repeatable external turning. Order the toolholder directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Turning toolholder DDJNR (DDJNL 2525) — left‑hand turning toolholder, 150 mm The Turning toolholder DDJNR is a left‑hand external turning holder engineered for DN-- 1504 indexable inserts, providing secure clamping and efficient insert changes for workshop turning operations. Left‑hand cutting direction For DN-- 1504 indexable inserts Cutting height 38 mm Overall length 150 mm Consistent diameters through stable clamping The holder is engineered to maintain a stable cutting geometry so that diameter tolerances remain tight over long production runs. Thanks to its 93° cutting angle, the clamping arrangement reduces side loads and minimises chatter, which ensures a more reliable surface finish and dimensional repeatability. The design is suited to standard turning set‑ups where stable tool engagement is required; the result is fewer interrupted batches and more efficient machining cycles. Fast changeovers with standard insert compatibility Compatibility with DN-- 1504 indexable inserts simplifies logistics and reduces set‑up time. Indexable inserts are designed to be rotated or replaced without regrinding, so tool life is extended and downtime is minimised. The holder accepts standard insert geometries, enabling quick insert seating and clamping without complex adjustments. For operations that require frequent insert swaps, this configuration supports rapid turnaround and steady throughput. Compact footprint for versatile machine use With an overall length of 150 mm and a compact shank, the toolholder fits a broad range of turret and toolpost arrangements. Key dimensions—holder height 25 mm, cutting‑head width 32 mm, holder width 25 mm and cutting height 38 mm—are balanced to offer rigidity while preserving accessibility in confined setups. The specification also lists a shank designation M15, making integration straightforward where threaded mounting is used. At weight 0.763 kg, the unit is robust yet manageable during tool changes and set‑up. Designed for dependable production and straightforward specification The toolholder carries the industry ISO designation DDJNL 2525, indicating standardised clamping and form‑fit characteristics for turning applications. Left‑hand orientation is specified for negative‑direction cuts and internal process planning. The combination of standardised interface and familiar insert format supports predictable procurement and tool management, which aligns with production planning needs and reduces qualification effort when introducing the holder into existing workflows. For application advice or order placement for Teknik Cutting Tools' turning toolholder DDJNR, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for prompt supply and technical guidance. Technical Data Article number: D309TM Manufacturer: Teknik Makina Facts Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting‑head width: 32 mm Cutting height: 38 mm Cutting angle: 93° Shank: M15 Weight: 0.763 kg Special features ISO designation: DDJNL 2525 For indexable inserts: DN-- 1504 Left‑hand cutting direction Suitable for external turning operations FAQ Which indexable inserts fit this holder? The holder is specified for DN-- 1504 indexable inserts; this insert family is compatible with the DDJNR clamping geometry and allows straightforward seat‑and‑clamp replacement. Is the toolholder left‑ or right‑handed? This turning toolholder is designed for left‑hand cutting direction and is intended for negative‑direction external turning operations. What is the shank or mounting designation? The toolholder is supplied with a shank designation M15, facilitating threaded attachment where this mounting is used. What are the key dimensions to check for turret fitting? Key dimensions include overall length 150 mm, holder height 25 mm, cutting height 38 mm and cutting‑head width 32 mm; these should be checked against turret clearance and toolpost layout. Which SKU identifies this exact configuration? This configuration is listed under SKU D309TM, turning toolholder DDJNR (ISO DDJNL 2525). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid left-hand turning configuration combined with clear ISO compatibility for reliable, repeatable operations; the precise clamping and compact 150 mm overall length support stable machining and short setup times. Order through Metav Werkzeuge or consult the technical team for matching inserts and machine integration. DDJNR clamping holder – Left-hand turning toolholder, ISO DDJNL 2525, 150 mm (Teknik Makina) A DDJNR clamping holder engineered for left-hand turning, compatible with DN-- 1506 indexable inserts and designed to deliver consistent clamping and machining stability in production environments Left-hand orientation for reverse turning Fits DN-- 1506 indexable inserts Overall length 150 mm for stable reach Robust 0.756 kg body with 35 mm cutting height Secure clamping for consistent turning accuracy The holder is built to provide stable clamping of indexable inserts, which is essential where repeatability is required. The geometry accepts DN-- 1506 indexable inserts, a common format for medium-duty turning, and the clamping principle is designed so that insert location is held firmly during cutting. This reduces vibration and tool movement, which in turn improves surface finish and dimensional consistency. The product is supplied with an ISO-compatible designation (DDJNL 2525) to ensure straightforward replacement in standard tool setups, and the clamping mechanism has been specified to match industrial turning practice rather than hobbyist use. Compact geometry that improves rigidity and reach With an overall length of 150 mm and a cutting height of 35 mm, this toolholder balances reach with rigidity. The holder dimensions include a 25 mm profile height and a 25 mm body width, while the cutting head measures 32 mm across; these proportions are aimed at minimising deflection during transverse cuts. The 93° cutting angle positions the insert to favour chip evacuation and stable cutting forces in left-hand operations. At 0.756 kg, the holder provides mass without excess bulk, helping to dampen chatter while remaining suitable for many turret and turret-like toolposts. Designed for practical workshop integration and quick setup The holder is identified under the ISO-style tag DDJNL 2525 and uses a shank designation M15, facilitating fast mounting and interchangeability across compatible toolposts. Left-hand orientation is specified for applications where a reverse cutting direction is necessary; the orientation combined with the insert fit means this holder will be integrated into turning sequences where geometry and orientation must be controlled precisely. Technical staff and purchasing departments will appreciate that insert compatibility and clear dimensional data allow rapid assessment of fit without lengthy trials, supporting efficient tool planning in both small workshops and larger production cells. For precision matching, compatibility checks or order enquiries, contact Metav Werkzeuge — Manufacturer support and logistics are available from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the DDJNR clamping holder and suitable DN-- 1506 inserts Technical data Article number: D312TM Manufacturer: Teknik Makina Type designation: DDJNR for DN-- Indexable Inserts ISO designation: DDJNL 2525 Key dimensions Overall length: 150 mm Cutting height: 35 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting angle: 93° Weight: 0.756 kg Features & compatibility Left-hand cutting direction Fits DN-- 1506 indexable inserts Shank designation M15 ISO-compatible holder form DDJNL 2525 FAQ What insert type does this holder accept? The holder is designed for DN-- 1506 indexable inserts, which are the specified insert format for the DDJNR clamping holder (Teknik Makina, SKU D312TM). Is the holder suitable for left-hand turning only? Yes; the toolholder has a left-hand orientation and is intended for reverse cutting directions where left-hand tool geometry is required. Which ISO designation should be used when replacing this holder? Use the ISO-style designation DDJNL 2525 when selecting compatible replacements or equivalent toolholders. What are the critical dimensions to check for machine compatibility? Key dimensions include the 150 mm overall length, 35 mm cutting height and the M15 shank designation; these determine reach, clearance and turret clamping compatibility. Can this holder be used on CNC lathes and manual lathes? The DDJNR clamping holder is compatible with standard turret or toolpost systems that accept the listed shank and ISO profile; final suitability depends on the specific machine mount and turret configuration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of reliable clamping, standard ISO designation and compact dimensions: the DDJNR 2525 configuration ensures secure seating of DN-- 1506 inserts while the 150 mm overall length provides improved rigidity and repeatable turning results. Order directly via Metav Werkzeuge or consult our specialists for further guidance. Clamping holder D172TM — DDJNR 2525 right‑hand tool holder for DN-- indexable inserts, 150 mm A Clamping holder D172TM designed as a DDJNR 2525 right‑hand turning holder for DN-- 1506 indexable inserts, optimised for stable external turning where predictable tool geometry and repeatable clamping are required. Right-hand cutting direction Compatible with DN-- 1506 inserts Overall length 150 mm, weight 0.756 kg DDJNR 2525 ISO designation, 93° cutting angle Precision clamping for consistent turning performance The DDJNR‑style holder is built to maintain a stable tool position under cutting forces: the DDJNR 2525 configuration secures DN-- 1506 indexable inserts at a defined 93° approach, which reduces vibration and helps preserve insert life. In practice, this means fewer tool changes and more predictable part quality. The clamping geometry is matched to the insert seat to ensure axial and radial stability during external turning, delivering measurable improvements in surface finish and dimensional repeatability. Compact shank and balanced dimensions for rigidity With a total length of 150 mm and a compact shank footprint of 25 x 25 mm, the holder offers a balance between reach and stiffness. The toolhead width of 32 mm and a cutting height of 35 mm provide the required clearance and cutting line for many standard turning set‑ups while keeping overhang minimal. The unit weight of 0.756 kg contributes to measured stability on the tool post without unnecessary mass, making it suitable for small to medium lathes where tool rigidity directly affects cycle time and tolerances. Clear tool geometry that simplifies setup and process planning The right‑hand cutting orientation and the 93° cutting angle define the approach geometry and chip flow for external turning tasks. For process planning this standardised geometry simplifies fixture design and makes insert selection straightforward: the holder accepts the DN-- 1506 insert family and locates each insert in the same plane, reducing set‑up variation. Where cycle time and reproducibility matter, a defined tool geometry enables faster first‑piece approvals and quicker process adjustments. Compatibility and workshop integration Identification as DDJNR 2525 and the shank/boring bar designation M15 support seamless integration into workshops that use ISO‑based tool indexing and standardised tool posts. The holder is intended for use with indexable inserts rather than solid cutters, which delivers cost efficiency through economical insert changes and the option to select grades and chipbreakers that suit a given operation. The compact form factor and ISO designation also simplify spare‑part management and procurement within a centralised tooling programme. For product supply or technical advice on the DDJNR 2525 clamping holder from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: D172TM Manufacturer: Teknik Makina Designation: Clamping holder (DDJNR for DN-- Indexable Inserts) ISO designation: DDJNR 2525 Facts Overall length: 150 mm Cutting height: 35 mm Holder height: 25 mm Head width: 32 mm Holder width: 25 mm Cutting angle: 93° Weight: 0.756 kg Shank/boring bar designation: M15 eCl@ss: 21181004 Special features Right-hand cutting direction Compatible with DN-- 1506 indexable inserts Files available: 62de7e3f0aced56449540e96, 62de7edb148ec6b71020ffb9 FAQ What insert type fits this holder? The holder is specified for DN-- 1506 indexable inserts and is configured in the DDJNR 2525 format for correct seating and clamping. Is this a right‑hand or left‑hand tool? This tool holder is a right‑hand version; the right‑hand cutting direction is defined in the product data. What are the key dimensions to check before purchase? Key dimensions include the 150 mm overall length, shank size 25 x 25 mm, head width 32 mm and cutting height 35 mm to ensure fit on the intended tool post. Does the holder have an ISO designation for stock management? Yes; the holder uses the DDJNR 2525 ISO designation suitable for standardised tool control and procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact left-hand clamping solution that combines precise insert positioning, a 95° cutting angle and a substantial 36 mm cutting height for confident external turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCLNL 2525 Clamp Holder — DCLN for CN-- Indexable Inserts, left-hand, 36 mm cutting height (Teknik Makina) A DCLNL 2525 clamping holder engineered for left-hand external turning with CN-- 1606 indexable inserts, offering secure clamping and stable geometry for workshop and production environments Left-hand cutting direction compatible Holds CN-- 1606 indexable inserts 36 mm cutting height for deep cuts ISO DCLNL 2525 toolholder geometry Stable geometry that improves process reliability The clamping unit is designed to deliver consistent results through its rigid toolholder geometry and defined mounting dimensions. With an overall length of 150 mm and a head width of 32 mm, the assembly keeps the insert position stable during interrupted or continuous cuts. The 95° cutting angle reduces radial engagement on the workpiece, which helps to lower vibration and improves surface finish. These measurable attributes are particularly relevant where repeatability and cycle-time consistency are required in small-batch production or repair workshops. Faster set-ups and predictable insert behaviour Compatibility with CN-- 1606 indexable inserts simplifies tooling logistics and reduces changeover time. The clamping mechanism is matched to the common insert form, enabling secure seating and repeatable indexation. The holder’s M16 shank designation ensures a robust connection to standard tool posts and adaptors, allowing the clamping unit to be integrated quickly into existing turret or toolpost arrangements. For operations that prioritise uptime and predictable tool life, this configuration supports leaner tooling routines and easier inventory management. Compact design that supports longer insert life Despite its modest mass of 0.432 kg, the toolholder provides a solid platform that transmits cutting forces efficiently to the machine. The 36 mm cutting height gives sufficient projection for medium-depth external turning without compromising stability, and the constrained overhang helps to reduce deflection. These characteristics contribute to longer insert life and fewer regrinds or replacements, which improves overall shop efficiency and reduces unplanned downtime. Practical applications and recommended use cases The DCLNL 2525 is suited to external turning applications where a left-hand orientation is required and where CN-- 1606 inserts are preferred for their economy and availability. Typical tasks include profiling, facing and general external diametral turning in workshop and production settings. The unit is best applied where toolholder rigidity and repeatable insert positioning affect part tolerances. For specialised cutting conditions or material-specific guidance, technical consultation is recommended to match insert grade and cutting data to the intended application. For tailored technical advice on the DCLNL 2525 clamp holder or to arrange supply through Metav Werkzeuge, contact our specialists at Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: D303TM Manufacturer: Teknik Makina ISO designation: DCLNL 2525 Product type: DCLN for CN-- indexable inserts Facts Overall length: 150 mm Cutting height: 36 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting angle: 95° Weight: 0.432 kg Shank/thread: M16 Special features Left-hand cutting direction Accepts CN-- 1606 indexable inserts Robust clamping geometry for repeatable seating Designed for external turning applications FAQ Which insert size does this holder accept? The DCLNL 2525 clamp holder is designed for CN-- 1606 indexable inserts and provides secure, repeatable seating for that insert form. Is the toolholder suitable for right-hand turning? This specific toolholder is configured for left-hand cutting direction; a right-hand variant should be selected for opposite-direction operations. What is the shank connection type? The holder uses an M16 shank/thread designation for mounting to compatible adaptors and tool posts. How does the 95° cutting angle benefit machining? A 95° cutting angle reduces radial cutting engagement, which lowers vibration and can improve surface finish and tool life under many external turning conditions. Can the holder be used in turret or manual toolpost setups? Yes, the DCLNL 2525 is suitable for turret and manual toolpost arrangements provided the mounting interface accepts the M16 shank and the left-hand orientation is compatible with the machine set-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of robust clamping, compatibility with CNMG 1204 indexable inserts and a 95° cutting angle to secure stable left‑hand turning operations; order the toolholder directly via Metav Werkzeuge or consult the technical team for application guidance. PCLNL 2525 clamping toolholder – PCLN for CNMG indexable inserts, left‑hand, 95° cutting angle (Teknik Makina) A compact yet sturdy PCLNL 2525 clamping toolholder designed for left‑hand turning with CNMG 1204 indexable inserts, suitable for precision and series turning where stability matters Secure clamp for CNMG 1204 inserts 95° cutting angle for deep turning 150 mm overall length, M12 mounting Consistent results through precise clamp geometry The holder is engineered for rigid clamping and repeatable set‑ups, which reduces vibration and tool deflection during turning operations. Compatibility with CNMG 1204 indexable inserts ensures a familiar insert geometry for toolrooms and production lines, while the 95° cutting angle supports deeper shoulder and contouring work by keeping the insert edge in an optimal engagement position. These design choices translate directly into more uniform surface quality and fewer interrupted cycles, supporting a leaner machining process with predictable outcomes. Faster set‑up and proven workshop dimensions Standardised dimensions simplify toolholder changeover and drawer organisation: the 150 mm overall length pairs with the ISO designation PCLNL 2525 and an M12 mounting thread for secure attachment to the tool post. The compact footprint and a mass of 0.766 kg provide a balance between rigidity and manoeuvrability, making the holder suitable for both single‑piece flows and automated turret stations. Clear, documented dimensions shorten set‑up time, lower the risk of errors and support process stability in multi‑shift environments. Optimal insert handling and process advantages Using indexable inserts with this clamping design reduces downtime and tooling costs because inserts can be rotated or replaced without regrinding. The holder’s geometry, including a cutting head width of 32 mm and a cutting height of 30 mm, is chosen to support secure seat engagement and accurate chip formation. The result is improved tool life and consistent chip evacuation, which together enhance productivity and make the machining process more cost‑effective over time. For operations seeking predictable cycle times, a well‑matched holder and insert combination is a pragmatic efficiency measure. Procurement confidence and supply continuity from Metav Sourcing the right toolholder is as much about product specification as about reliable supply. Metav combines decades of metrology and tooling expertise with a broad catalogue, giving access to tested components and dependable logistics. The combination of technical competence, a wide product range and a transparent supply chain supports uninterrupted production planning and reduces administrative overhead. For workshops aiming to consolidate suppliers while maintaining precision standards, this clamping toolholder is an efficient addition to a centralised tooling strategy. For secure left‑hand turning with CNMG 1204 indexable inserts, contact Metav Werkzeuge for technical advice and reliable supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: P142TM Manufacturer: Teknik Makina Facts Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Cutting angle: 95° Weight: 0.766 kg Special features ISO designation: PCLNL 2525 Suited for CNMG 1204 indexable inserts Left‑hand cutting direction Mounting thread: M12 Design: PCLN for CNMG indexable inserts FAQ Which insert size fits this toolholder? The holder accepts CNMG 1204 indexable inserts and is configured to provide the correct seating and clamping for that insert form factor. Is the toolholder suitable for left‑hand turning only? Yes, the clamping geometry and orientation are specified for left‑hand turning applications. What mounting connection is required for installation? The holder uses an M12 mounting thread and standardised ISO dimensions for secure attachment. How does the 95° cutting angle affect machining? A 95° cutting angle allows more aggressive shoulder cuts and better access in deep turning tasks while maintaining edge engagement and surface integrity. Can this holder be used in automated turret machines? The compact 150 mm overall length and standardised mounting make the holder compatible with many turret and gang tool installations, provided the machine accepts the ISO interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable clamping concept combined with precise insert compatibility and compact dimensions for reliable turning cycles; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. DDJNR Clamping Toolholder (DDJNL 2525) – Left-hand holder for DN-- 1104 inserts by Teknik Makina The DDJNR clamping toolholder is a left-hand turning holder engineered for DN-- 1104 indexable inserts, intended for precision lathe work where repeatable clamping and consistent cutting geometry are required. Left-hand cutting orientation For DN-- 1104 indexable inserts Body width 25 mm, head width 32 mm Overall length 150 mm, weight 0.751 kg Consistent clamping for repeatable turning quality The holder's design prioritises a rigid clamping interface to maintain stable tool seating throughout the cut. Compatibility with DN-- 1104 indexable inserts and the ISO designation DDJNL 2525 ensures a standardised set-up that reduces repositioning time and helps preserve insert life. With a cutting height of 30 mm, the arrangement supports repeatable engagement depth, which translates into more predictable tool wear and improved surface finish on turned components. The focus here is on measurable gains in process reliability rather than abstract claims. Compact dimensions for versatile machine integration The toolholder's compact envelope — body width 25 mm and cutting-head width 32 mm — enables fitting in restricted turret spaces without sacrificing rigidity. The modest mass of 0.751 kg and an overall length of 150 mm keep overhang low, helping to reduce deflection in medium-duty turning tasks. These dimensional facts make the holder suitable where space on the toolpost is limited but stable support is still required, enabling shorter set-up times and fewer fixture adjustments during production runs. Cutting geometry tuned for controlled chip formation A cutting angle of 93° provides a near-normal engagement that promotes predictable chip flow and reduces sudden load spikes on the insert. The left-hand orientation is specified for operations that require an outward or infeed direction corresponding to left-handed toolpaths. Together, the geometry and insert compatibility assist in maintaining consistent cutting forces, which can positively affect cycle time stability and downstream inspection rates in serial manufacturing. Built for workshop resilience and simple mounting Mounting features include an M11 reference for the clamping bore, designed to integrate with established holder-fixture systems. The DDJNR clamping toolholder offers straightforward mechanical interfaces that limit assembly complexity and support quick replacement of worn tools. Sourcing through Metav provides the added assurance of a European quality filter and access to application advice from an experienced distributor network, helping to align the holder with specific machine and process requirements. Contact Metav Werkzeuge today for specification guidance and to secure Teknik Makina clamping toolholders directly from our Emmerich quality filter — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D308TM Manufacturer: Teknik Cutting Tools / Teknik Makina Product name: DDJNR clamping toolholder Core data Overall length: 150 mm Weight: 0.751 kg Cutting height: 30 mm Body width: 25 mm Head (cutting) width: 32 mm Cutting angle: 93° Direction: Left Special features Compatible inserts: DN-- 1104 ISO designation: DDJNL 2525 Mounting bore: M11 Type: DDJNR for DN-- indexable inserts FAQ Which inserts fit this holder? The holder is specified for DN-- 1104 indexable inserts; the DDJNR geometry and the ISO reference DDJNL 2525 match that insert family for secure seating and correct rake geometry. Is this a left‑hand or right‑hand holder? This DDJNR clamping toolholder is a left‑hand orientation, designed for left‑hand turning toolpaths and applications requiring that cutting direction. What are the key dimensions to check for machine compatibility? Key dimensions are overall length 150 mm, body width 25 mm, head width 32 mm, and cutting height 30 mm; the mass is 0.751 kg. What mounting details are provided? The toolholder lists a mounting reference of M11 for the clamping bore and the ISO designation DDJNL 2525 for interface compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid clamping solution that combines a 25×25 mm cross-section with a 150 mm overall length for stable turning and repeatable insert positioning; compatibility with RCMT 0803 indexable inserts ensures quick tooling changes and predictable process results. Order the SRDCN 2525 directly via Metav Werkzeuge or consult our advisers for application-specific guidance. SRDCN 2525 toolholder for RCMT 0803 indexable inserts — 25×25 mm, 150 mm overall length (Teknik Makina) A SRDCN 2525 toolholder engineered for turning applications with RCMT 0803 indexable inserts, offering neutral cutting direction and a compact footprint for reliable workshop integration Precision 25×25 mm holder dimensions Compatible with RCMT 0803 indexable inserts 150 mm overall length for stable reach Robust clamping with M08 fixing screw Reduced vibration for consistent surface finish The holder’s square shank and compact geometry deliver improved rigidity, reducing chatter during interrupted cuts and longer contact cycles. With a 25×25 mm section and a measured 150 mm overall length, the assembly minimises overhang while maintaining sufficient reach for most external turning tasks. That structural balance translates into steadier tool life for the insert and fewer reworks, so production tolerances remain stable across batches. The result is a measurable improvement in process reliability without altering machining strategy. Quick setup and broad insert compatibility Designed specifically for RCMT 0803 indexable inserts, the clamping system permits fast insert changes and precise seat location, cutting set-up time between operations. The fixing uses an M08 screw, enabling secure retention with standard workshop torque tools. At a mass of 0.653 kg, the holder adds only modest rotating inertia, keeping feed and speed choices flexible for different steels and cast materials. The neutral cutting direction supports common turning routines and allows the same holder to be used in diverse fixtures and machines. Engineered for workshop continuity and predictable throughput The SRDCN 2525 is a compact turning holder that supports uninterrupted production by simplifying tooling logistics: one holder type covers a wide range of standard external turning tasks when paired with the appropriate RCMT insert. Built for routine workshop use, the design focuses on secure clamping and repeatable reference surfaces that reduce alignment checks after insert replacement. Backed by Teknik Makina manufacturing and the Metav quality filter in Emmerich, the component integrates into supply chains with dependable availability and consistent specification adherence. Contact Metav Werkzeuge for tailored technical advice and to source the Teknik Makina SRDCN 2525 toolholder (SKU D271TM) for immediate workshop integration. Technical data SKU: D271TM GTIN: 4061905154072 Manufacturer: Teknik Makina Facts Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting-head width: 12.5 mm Cutting-edge height: 37 mm Weight: 0.653 kg Special features Compatible with RCMT 0803 indexable inserts Neutral cutting direction Fixing screw: M08 ISO designation: SRDCN 2525 FAQ Which inserts fit this holder? The SRDCN 2525 toolholder is compatible with RCMT 0803 indexable inserts and is designed to locate and clamp them securely for external turning operations. What are the key dimensions and mass? Overall length is 150 mm, the shank measures 25×25 mm, the cutting-head width is 12.5 mm, cutting-edge height 37 mm; the holder weighs 0.653 kg (SKU D271TM by Teknik Makina). What fixing hardware is required? Retention is achieved with an M08 fixing screw; the M08 interface provides a reliable clamping torque compatible with standard workshop tools. Is the holder suitable for left- and right-hand turning? The holder is specified with a neutral cutting direction, making it appropriate for standard turning set-ups where a neutral seat and insert geometry are required. How does the holder support production stability? By combining a compact 25×25 mm shank with a 150 mm length and precise insert seating, the design improves rigidity and repeatability, reducing tool chatter and minimising setup variation across workpieces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the SRDCN 2525 clamping design with a 150 mm overall length and a 35 mm cutting height to achieve stable, repeatable external turning results; order via Metav Werkzeuge or consult their specialists for application advice. SRDCN 2525 Clamping Holder by Teknik Makina — for RCMT 1003 indexable inserts, neutral cutting A SRDCN 2525 clamping holder engineered for neutral turning operations with RCMT 1003 indexable inserts, suited to general external turning tasks requiring reach and rigidity. SRDCN 2525 design for RCMT 1003 inserts Neutral cutting direction for versatile turning 150 mm overall length for extended reach 25 mm holder height with 12.5 mm head width Stable clamping for consistent turning performance The SRDCN 2525 toolholder is built to deliver rigid support for RCMT 1003 indexable inserts, reducing chatter and improving surface finish in serial turning. With an overall length of 150 mm and a measured mass of 0.67 kg, the holder balances reach and stability so that cutting forces are transferred predictably to the machine. The neutral orientation makes it adaptable to common turning set-ups, enabling consistent cycle times and fewer rejected parts. Secure insert retention and clear mechanical data Designed around a robust clamping arrangement, the holder uses an M10 clamping screw to secure the insert and maintain axial position under load. The 35 mm cutting height and a head width of 12.5 mm create a defined contact geometry that supports repeatable tool positioning and easier tool setting on the toolpost. Indexable inserts such as RCMT 1003 are seated for fast inspection and replacement, which shortens downtime and simplifies wear management in production environments. Practical fitment and workshop integration The holder’s 25 mm body height and 25 mm width are aligned with standard external turning fixtures, so installation into existing toolposts is straightforward where neutral tool orientation is required. The compact head profile and 150 mm reach suit jobs demanding access to deeper features without compromising stiffness. Weight and dimensions are provided to assist with balancing and dynamic planning when integrating the holder into automated or manual turning cells. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools SRDCN 2525 clamping holder — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: D274TM ISO designation: SRDCN 2525 Compatible inserts: RCMT 1003 Brand: Teknik Makina Facts Overall length: 150 mm Cutting height: 35 mm Holder height: 25 mm Head width: 12.5 mm Holder width: 25 mm Weight: 0.67 kg Special features Neutral cutting direction Clamping screw: M10 For RCMT 1003 indexable inserts SKU: D274TM FAQ What inserts fit this clamping holder? The SRDCN 2525 clamping holder is specified for RCMT 1003 indexable inserts and is dimensioned to seat that insert form reliably. Is the cutting direction fixed or neutral? This holder is configured for a neutral cutting direction, making it suitable for general external turning tasks where neutral orientation is required. What are the key dimensions to check for machine compatibility? Important dimensions are the 150 mm overall length, 35 mm cutting height, and 25 mm holder height; these should be compared with the machine’s toolpost clearance and setup. How is the insert secured in the holder? The insert is clamped using an M10 screw arrangement designed to provide secure retention under typical turning forces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A dependable left‑hand clamping holder for VCMT 1103 indexable inserts with a 93° cutting angle and 150 mm overall length — combine precise chip control with stable reach for smoother turning cycles. Order directly via Metav Werkzeuge or consult our specialists for application guidance. SVJC Clamping Holder (SVJCL 2525) – for VCMT 1103, left‑hand, 93° by Teknik Makina The SVJC for VCMT Indexable Inserts is a left‑hand turning holder engineered for secure clamping of VCMT 1103 inserts in conventional external turning applications. Left‑hand clamping for VCMT 1103 inserts 93° cutting angle for reliable chip control Overall length 150 mm for stable reach ISO SVJCL 2525 shank with M11 bore Consistent turning performance for predictable results The holder is designed to deliver repeatable geometry in turning operations, helping to reduce setup variance and scrap. With a 93° cutting angle, the toolholder alters the insert approach to favour controlled chip formation and improved surface finish. The left‑hand orientation makes it suitable for operations where counter‑direction turning is required, and compatibility with VCMT 1103 indexable inserts ensures access to a widely used insert family for general to semi‑finish turning. This combination supports a rational upgrade to existing toolsets by prioritising process stability and predictable machining cycles. Secure mounting and dimensional stability for higher productivity Built around the ISO SVJCL 2525 shank form, the holder features a 25 mm clamping height and a 25 mm shank width, with a 32 mm cutting‑head width and 40 mm cutting height, providing a rigid connection to the toolpost. The M11 bore simplifies fastening and contributes to a compact, robust assembly with a measured weight of 0.738 kg, balancing inertia and vibration damping. These measurable attributes translate directly into less chatter, longer insert life and reduced rework — clear economic advantages for production and maintenance planning. Practical workshop integration and interchangeability At 150 mm overall length, the holder offers a practical reach for many external turning setups without compromising stiffness. Acceptance of VCMT 1103 inserts means spare parts and inserts are readily available, allowing fast changeovers and reduced machine downtime. The shank and bore specification supports modularity in workshop toolholders, enabling easy replacement within established holders and fixtures. For procurement and inventory decisions, the holder provides a straightforward, data‑driven choice that aligns with systematic tooling strategies and lean operations. For ordering information or tailored application advice, contact Metav Werkzeuge for direct supply and technical consultation from their Emmerich centre. Technical data SKU: D387TM Brand: Teknik Makina Article designation: SVJCL 2525 For inserts: VCMT 1103 Dimensions / Core technical data Overall length: 150 mm Cutting angle: 93° Clamping height: 25 mm Shank width: 25 mm Cutting‑head width: 32 mm Cutting height: 40 mm Weight: 0.738 kg Bore / fastening: M11 Compatibility & Special features Left‑hand cutting direction Compatible with VCMT 1103 indexable inserts ISO shank form SVJCL 2525 Intended for external turning applications FAQ Which insert types fit this holder? The holder accepts VCMT 1103 indexable inserts and is configured specifically for that insert family. Is the toolholder left‑hand or right‑hand? The toolholder is specified as left‑hand, designed for counter‑direction turning operations. What is the overall length and how does it affect stability? Overall length is 150 mm; this length offers a balance between reach and stiffness for typical external turning tasks. What fastening interface is used for mounting? Mounting is provided via an M11 bore, compatible with standard clamping hardware for the SVJCL 2525 shank form. What are the key dimensional characteristics to check before purchase? Reference the 25 mm clamping height, 25 mm shank width, 32 mm cutting‑head width, 40 mm cutting height and the 0.738 kg mass when verifying fit in a toolpost or turret Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the SVJCR 1212 shank form and a 93° cutting angle to deliver consistent turning results with minimal vibration; the holder’s compatibility with VCMT 1103 indexable inserts simplifies tooling logistics and reduces setup time. Order through Metav Werkzeuge or request tailored advice from our consultants. SVJC for VCMT Indexable Inserts — Right-hand clamping holder by Teknik Makina, SVJCR 1212 The SVJC for VCMT Indexable Inserts is a right-hand turning clamping holder designed for industrial lathe work, offering secure chip breaker compatibility and a compact 110 mm overall length for close-quarters machining. SVJCR 1212 ISO shank for stable clamping Compatible with VCMT 1103 indexable inserts 93° cutting angle for precise turning 110 mm overall length, lightweight 0.135 kg Precise geometry for reliable turning performance The holder’s 93° cutting angle and ISO form SVJCR 1212 ensure a controlled cutting position, which reduces deflection during interrupted cuts and improves surface finish. The defined geometry transmits cutting forces efficiently to the toolpost, resulting in repeatable dimensional accuracy and fewer rejects in batch production. This section concentrates on performance metrics rather than marketing hyperbole, allowing production planners to foresee real process improvements. Compatibility that reduces tooling complexity Built specifically for VCMT 1103 indexable inserts, the toolholder standardises insert choice across multiple operations, lowering inventory variety and simplifying reconditioning cycles. The clamping interface and J11 bar designation support consistent insert seating and fast index changes, which in turn reduces machine downtime and increases throughput. This practical compatibility is a direct contribution to lower total tooling costs in the medium to large workshop. Compact design for constrained setups With an overall length of 110 mm and a shank height of 12 mm, this clamping holder suits setups where space is limited or close-proximity turning is required. The 16 mm cutting-head width and 21 mm cutting height provide sufficient reach and rigidity for common external turning tasks, while the holder’s lightweight 0.135 kg construction aids dynamic stability at higher spindle speeds without overloading turrets or carriers. Engineered clamping for consistent seat and life The clamping mechanism has been designed to deliver a firm mechanical seat, supporting precise torque transmission and minimising micro-movement under load. This stability extends insert life by ensuring even wear across the cutting edge and reduces the frequency of retorquing operations. For operations where predictable tool-life is essential, the engineered clamping delivers measurable gains in uptime. Practical benefits for production planners Adopting this holder streamlines tool management: one holder geometry that fits a widely used insert type translates into faster setup times and fewer errors at tool change. The right-hand configuration matches conventional turning directions and can be integrated into standard tool libraries without additional modification. These operational efficiencies contribute directly to improved cycle-time predictability and resource planning. Suitable applications and expected outcomes Ideal for general steel turning and mixed-material workshop tasks, the holder performs well in repetitive machining sequences and small-batch production where stability and ease of insert replacement matter. The combination of ISO-standard form, compact dimensions and defined cutting angle supports both conservative and more aggressive machining strategies, depending on insert grade and machine capability. Contact Metav Werkzeuge for a detailed machining recommendation for the Teknik Cutting Tools SVJC clamping holder and to discuss delivery options from our Emmerich supply hub. Technical data SKU: D240TM Brand: Teknik Makina Designation: SVJC for VCMT indexable inserts (SVJCR 1212) Cutting direction: right Overall length: 110 mm Weight: 0.135 kg Cutting angle: 93° Compatible insert: VCMT 1103 Shank height: 12 mm Cutting-head width: 16 mm Cutting height: 21 mm Boring bar designation: J11 Facts ISO form: SVJCR 1212 Length: 110 mm Shank height: 12 mm Cutting-head width: 16 mm Cutting height: 21 mm Angle: 93° Weight: 0.135 kg Special features Right-hand clamping holder Compatible with VCMT 1103 inserts Compact 110 mm form for close machining Stable clamping for repeatable seating Designed for industrial lathe turning FAQ What insert type does this holder accept? The holder accepts VCMT 1103 indexable inserts and is engineered for secure seating with that insert geometry. Is the holder right- or left-hand? This toolholder is configured for right-hand turning applications. What is the ISO designation and what does it mean? The ISO form SVJCR 1212 describes shank and head geometry for standardised clamping and interchangeability in lathe tool systems. Will this holder fit compact setups? Yes — the 110 mm overall length and 12 mm shank make it suitable for constrained toolpost environments. How does the cutting angle affect performance? The 93° cutting angle positions the insert to reduce deflection during cuts, improving surface finish and dimensional repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable-insert solution that combines precision with easy maintenance — a 17 mm cutting diameter, 40 mm cutting length and secure Torx clamp give reliable repeatability in production environments; order the S903TM directly via Metav Werkzeuge or ask our consultants for tailored advice. S903TM shank milling cutter by Teknik Makina — Ø17 mm, 2 flutes, for WNMX 0603 inserts The S903TM is a shank milling cutter designed to accept WNMX 0603 indexable inserts, engineered for secure clamping and consistent chip control in general machining and light to medium milling operations. Compatible with WNMX 0603 inserts 17 mm cutting diameter for compact machining 40 mm cutting length for extended engagement Torx clamp M2.5 x 5.5 with T8 key Repeatable accuracy for series production The tool provides consistent cutting geometry through its precision shank and insert interface, which reduces runout and stabilises tool behaviour during repeating cycles. The combination of a Ø17 mm cutter body and a 40 mm cutting length delivers a balance between reach and rigidity, meaning fewer reworks and a more predictable process flow. For operations where component tolerances matter, this construction minimises vibration and helps keep surface finish within tighter specifications. Fast insert changes and secure clamping for uptime A clear benefit of the design is the Torx clamping system (M2.5 x 5.5) requiring a T8 key, which enables swift insert replacement and precise torque application. Quick, repeatable clamping shortens tool-change intervals and makes tool handling more efficient on busy shop floors. The two-flute geometry supports reliable chip evacuation, so each insert maintains cutting performance longer and tool change frequency is reduced — directly supporting higher overall equipment effectiveness. Versatile compatibility and straightforward integration Designed to accept WNMX 0603 indexable inserts and compatible with Korloy plate types, the cutter fits existing insert inventories and makes retrofitting simple. The shank diameter of 16 mm and an overall length of 150 mm give a compact footprint while remaining adaptable to common collet and holder systems. This ease of integration means reduced setup time when switching between operations and a faster return to full production. Practical advantages for the workshop Lightweight at 0.24 kg yet robust in build, the cutter is a pragmatic choice for workshops seeking a dependable insert-holder that keeps spindles and holders in their nominal working ranges. The 90° cutting angle provides predictable engagement for face and peripheral milling alike, while the two cutting edges present a cost-effective solution where tool inventory management and rapid turnarounds are priorities. The tool’s simple geometry makes inspection and maintenance straightforward, reducing downtime for routine checks. For reliable high-performance milling backed by Teknik Makina engineering, contact Metav Werkzeuge in Emmerich for precise product guidance and prompt supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: S903TM Product: Shank milling cutter for WNMX 0603 indexable inserts Manufacturer: Teknik Makina Ø cutting diameter: 17 mm Shaft diameter: 16 mm Cutting length: 40 mm Overall length: 150 mm Number of flutes: 2 Weight: 0.24 kg Cutting angle: 90° Torx screw: M2.5 x 5.5 Torx key: T8 Compatible inserts: WNMX 0603 Recommended insert maker: Korloy Flute count: 2 Shank form: straight shank Application: indexable-insert milling FAQ What insert type fits this cutter? The cutter accepts WNMX 0603 indexable inserts; it is set up to work with Korloy-type plates so existing WNMX 0603 stocks can be used. What is the cutting diameter and overall length? The tool offers a 17 mm cutting diameter with an overall length of 150 mm, delivering a compact solution for confined set-ups. How is the insert secured and maintained? Inserts are clamped with a Torx screw (M2.5 x 5.5) tightened with a T8 key, allowing quick, repeatable insert changes and secure clamping for stable cutting. Which applications suit this shank cutter? The shank milling cutter is suited to light and medium milling tasks that benefit from an indexable-insert strategy, where quick insert swaps and cost-effective cutting edges are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable‑insert solution that combines a 25 mm shank for high rigidity with a 60 mm cutting length and a 90° cutting angle for precise square‑shoulder machining; order the cutter via Metav Werkzeuge or consult the team for integration into production. Indexable‑insert shank cutter S802TM — 25 mm shank, 90° cutting angle, for WNMX 09T3 inserts (Teknik Makina) The Indexable‑insert shank cutter S802TM is a purpose‑built 90° milling body for WNMX 09T3 indexable inserts, offering a compact overall length and a rigid shank for stable machining in serial and jobbing environments 25 mm shank diameter for stable clamping Compatible with WNMX 09T3 indexable inserts 90° cutting angle for square shoulder milling Torx M3x7 clamp with T8 key for secure insert fit Rigidity and repeatable geometry for reliable milling results Built around a 25 mm shank that increases spindle stability, this milling body delivers consistent cutting geometry and reduces chatter during interrupted cuts. The design translates directly into measurable gains in surface finish and dimensional repeatability: the 90° cutting angle enables true square shoulders while the compact construction minimises overhang. For production runs where cycle times and part quality matter, the combination of a rigid shank and a precise cutting face supports higher feed rates and predictable tool life without compromising tolerances. Fast insert changes and predictable maintenance intervals The tool accepts WNMX 09T3 indexable inserts and is compatible with Korloy grades, allowing straightforward grade selection for specific materials. Insert retention is secured by a Torx M3x7 screw using a T8 key, which simplifies replacement and reduces downtime during tool changes. With a 60 mm cutting length, the body supports deeper engagements while keeping insert life manageable; the modular concept reduces consumable costs because worn inserts are replaced rather than the whole body, a pragmatic benefit for workshop and industrial procurement. Practical dimensions and handling for workshop integration With a 150 mm overall length and a diameter of 25 mm, the shank cutter balances reach and stiffness for common milling tasks that demand square shoulders and planing passes. The tool has two cutting edges, a weight of 0.563 kg, and a compact profile that fits typical toolholders; this keeps tool offsets predictable and reduces balancing requirements. Supplied and distributed via Metav Werkzeuge, the milling body benefits from local stock and logistics that support timely replenishment and professional after‑sales communication, reinforcing continuity in the machining process. For integration advice or to discuss the Teknik Cutting Tools S802TM’s suitability for a specific machining task, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to arrange a technical consultation and delivery options. Technical Data Article number: S802TM Manufacturer: Teknik Makina Facts Diameter: 25 mm Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Cutting edges: 2 Cutting angle: 90° Weight: 0.563 kg Torx screw: M3x7 Torx key: T8 Special features Compatible with WNMX 09T3 indexable inserts Compatible insert manufacturer: Korloy 90° cutting angle for square shoulder milling Torx clamp system for secure insert retention 25 mm shank for stable clamping FAQ Which inserts fit this cutter? The cutter is designed for WNMX 09T3 indexable inserts; Korloy grades are compatible and recommended according to machining needs when using the S802TM from Teknik Makina. What are the key dimensions of the tool? The S802TM has a 25 mm shank, 60 mm cutting length and 150 mm overall length; the tool weight is 0.563 kg and it features two cutting edges. For which machining tasks is this body best suited? The 90° cutting geometry makes the tool particularly suitable for square shoulder milling and similar operations requiring precise perpendicular faces. How are the inserts secured and replaced? Inserts are clamped with an M3x7 Torx screw; a T8 key is used for secure, repeatable fastening and quick replacement of worn inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, high-efficiency milling solution that combines a Ø40 mm cutter body, a 32 mm shank for stable clamping and compatibility with APKT 1604 indexable inserts — ideal for workshops seeking consistent tool life and quick insert changes. Order the HF26TM via Metav Werkzeuge or consult our specialists for tailored setup advice. Teknik Makina Igelfräser HF26TM — Ø40 mm indexable milling cutter, APKT 1604 compatible The Igelfräser is a compact indexable milling cutter engineered for versatile metalworking operations where fast material removal and easy insert replacement matter most. Indexable APKT 1604 compatibility Ø40 mm cutter diameter 32 mm shank for solid clamping 12 cutting edges for steady removal rate High removal rates with controlled stability The HF26TM delivers an efficient balance between material removal and tool stability thanks to its 12 cutting edges and Ø40 mm body. A larger number of cutting edges reduces individual chip load, which supports smoother feeds and extends insert life; this makes the device particularly suitable where consistent cycle times and predictable tool wear are required. The design promotes efficient chip evacuation while maintaining a steady cut, helping to reduce secondary operations and downtime. Quick insert changes and shop-floor friendliness Insert management is straightforward because the head accepts standard APKT 1604 indexable inserts and is compatible with Korloy grades. Inserts are secured with M4x10 Torx screws and serviced with a T15 key, enabling rapid index or replacement procedures on the shop floor. The use of industry-standard inserts lowers tooling inventory complexity and provides freedom to select coating and grade options that suit specific workpiece requirements. Rigid clamping and ergonomic dimensions for machining centres A 32 mm shank diameter provides a secure, vibration-resistant interface with toolholders, contributing to enhanced surface finish and longer tool life under moderate to demanding conditions. With an overall length of 150 mm and a 58 mm cutting height, the cutter offers a good reach-to-stability ratio, making it a practical choice for both compact machining centres and horizontal milling setups where accessibility and rigidity are both needed. Practical benefits for workshop workflows The cutter’s compact mass (approx. 0.95 kg) and standard insert format reduce handling complexity and spare-part logistics. Compatibility with widely available APKT 1604 inserts allows rapid reconditioning of cutting edges by indexation rather than full regrinds, cutting operating costs and shortening machine downtime. The tool’s straightforward geometry simplifies programming parameters and supports reproducible results across batches. Contact Metav Werkzeuge for personalised advice on HF26TM selection, compatible insert grades and clamping options; call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a technical consultation and secure supply from Emmerich. Technical data Article number: HF26TM Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Dimensions & core data Diameter: 40 mm Number of cutting edges: 12 Cutting height: 58 mm Overall length: 150 mm Shank diameter: 32 mm Weight: 0.95 kg Features & compatibility Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 SKU: HF26TM FAQ Which insert type fits the cutter? The HF26TM uses APKT 1604 indexable inserts; compatible grades from Korloy are commonly applied depending on the workpiece and machining strategy. What is the cutter diameter and cutting height? The tool features a 40 mm diameter and a cutting height of 58 mm, offering a compact yet effective cutting envelope. What shank size is required for the holder? A 32 mm shank diameter provides the required clamping interface; this contributes to stable machining and reduced vibration. How many cutting edges does the head provide? The milling head has 12 cutting edges, which supports even chip distribution and steady removal rates in continuous operations. Which fastening tools secure the inserts? Inserts are secured with M4x10 Torx screws and require a T15 Torx key for replacement or indexing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, purpose-built parting solution: the KL29TM delivers a 150 mm overall length, a 2 mm blade width and a 36 mm maximum plunge depth, enabling precise parting and controlled plunging in turning applications. Order directly via Metav Werkzeuge or contact our consultants for application advice. Parting blade KL29TM – Parting blade with 150 mm length and 2 mm blade width by Teknik Makina Parting blade KL29TM for metal-turning operations, designed for use with indexable inserts and standard clamping holders in workshop and industrial settings Compatible with Korloy MGMN 200 inserts 150 mm overall length Max plunge depth 36 mm 2 mm blade width Precise parting for repeatable production cycles The KL29TM is engineered for reliable parting where dimensional control matters. With a 150 mm length and a 25 mm cutting height, the geometry offers a stable tool overhang while the 2 mm blade width reduces material waste and heat build-up during the cut. This combination supports consistent cycle times and predictable tool life, helping to improve process repeatability and reduce set-up variations on the lathe. Compatibility and secure clamping for safe plunging Compatibility with Korloy MGMN 200 insert geometry ensures simple procurement and interchangeability with common indexable inserts. The blade is dimensioned for clamping systems that allow a maximum plunge depth of 36 mm, so holders rated for that depth should be selected to secure the tool properly. Explaining the term: MGMN 200 denotes a standard insert size and pocket form used widely in grooving and parting applications, which makes the KL29TM suitable for established insert toolflows in production workshops. Workshop benefits and operational suitability Narrow-profile blades such as this one reduce contact area and chip load, which often leads to cleaner parting faces and less workpiece distortion. The tool’s 32 mm blade height and robust section contribute to lateral stiffness, helping to suppress vibration during cut-off operations. Designed for machinists and production shops, the blade supports faster changeovers with standard clamping hardware and aligns with the aim of efficient material separation without excessive secondary finish work. For tailored advice and rapid supply from our Emmerich centre, contact Metav Werkzeuge—technical consultation and order processing are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: KL29TM Manufacturer: Teknik Makina ECLASS: 21181018 Overall length: 150 mm Blade height: 32 mm Cutting height: 25 mm Blade width: 2 mm Maximum plunge depth (holder-rated): 36 mm Compatible inserts: Korloy MGMN 200 Intended use: Parting / grooving operations in turning SKU: KL29TM FAQ Which inserts fit this parting blade? The KL29TM is compatible with Korloy inserts in the MGMN 200 size and pocket form for standard parting applications. What is the maximum plunge depth for safe operation? Maximum plunge depth is 36 mm as specified for the KL29TM and must be observed with an appropriate clamping holder. What are the key dimensions to check for setup? Important dimensions are overall length 150 mm, blade height 32 mm, cutting height 25 mm and blade width 2 mm for the KL29TM. Is this blade suitable for heavy overhangs? The KL29TM offers a balance of length and section for moderate overhangs; for extended reach operations, a holder with higher rigidity should be considered. What applications is this blade intended for? Designed for parting and grooving on lathes where Korloy MGMN 200 inserts are used and where a narrow cut width is required for efficient material separation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com