Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a narrow 3.45 mm kerf and 150 mm blade length for efficient parting with minimal material loss, combined with compatibility for DGN 4 indexable inserts to keep tool changes fast and repeatable; order directly via Metav Werkzeuge or consult the technical team for setup advice. KL22TM parting blade by Teknik Makina — 150 mm length, 3.45 mm blade width A KL22TM parting blade engineered for grooving and parting operations on CNC lathes, designed to accept DGN 4 indexable inserts and deliver a precise, narrow kerf for economical turning processes. Narrow 3.45 mm kerf for reduced scrap 150 mm overall length for deep reach 25 mm cutting height for larger workpieces Compatible with DGN 4 indexable inserts Precise parting for consistent cycle times The KL22TM parting blade combines a 3.45 mm blade width with a 150 mm length to create a narrow kerf that reduces material loss and lowers downstream finishing effort. In practical terms, the slender tool cross-section enables faster cut-through with less resistance, which can shorten cycle times on repeat turning tasks. Compatibility with DGN 4 indexable inserts simplifies insert replacement and supports consistent edge geometry; the result is repeatable parting cycles and predictable process output. The narrow kerf also helps with chip evacuation in many standard turning setups, improving surface finish and reducing secondary operations. Robust geometry and reliable clamping for stable cuts The blade’s 32 mm body height and 25 mm cutting height provide a stable support profile in rigid clamping systems, which helps to minimise vibration and tool deflection during parting. A well-mounted parting blade maintains concentricity and reduces rework; the KL22TM’s proportions are chosen to balance reach and stiffness for common lathe configurations. The component is intended for use in dedicated parting holders that accept the blade form and secure it under high clamping forces, ensuring process reliability even in continuous machining. Where machine setup permits, the greater effective length enables deeper cuts without compromising the holder’s gripping function. Designed for operational efficiency and supply-chain reliability With a maximum intended parting depth of 36 mm, the KL22TM is suitable for many standard grooving and parting tasks that require deeper material penetration. The combination of narrow kerf and the specified cutting height supports material-efficient production and reduces scrap rates per component. Sourcing through Metav provides an additional quality filter: Metav’s distribution from Emmerich ensures consistent availability and straightforward ordering for workshops and industry customers, backed by a broad range of compatible cutting tools and accessories to complete the toolset. Contact Metav Werkzeuge to specify the KL22TM parting blade for machine setup and to confirm compatible DGN 4 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: KL22TM Name: Parting blade Manufacturer: Teknik Makina Core dimensions Blade length: 150 mm Blade width: 3.45 mm Blade height: 32 mm Cutting height: 25 mm Max cutting depth: 36 mm Compatibility & features Compatible with DGN 4 indexable inserts Application: Parting / grooving Stechschwert design for narrow-kerf operations FAQ Which insert type fits this parting blade? The KL22TM parting blade is specified for use with DGN 4 indexable inserts, a common pocket form that enables quick indexation and repeatable cutting edges in grooving and parting operations. What dimensions should be checked before ordering? Key dimensions are the 150 mm blade length, 3.45 mm blade width, 25 mm cutting height and 36 mm maximum cutting depth; these determine reach, kerf and the required holder geometry for the KL22TM. Is this blade suitable for CNC lathe use? Yes — the KL22TM is designed for grooving and parting on CNC lathes when mounted in the appropriate parting holder; the blade geometry balances reach and stiffness to reduce vibration during parting cycles. How does the narrow blade width affect production? A narrow 3.45 mm kerf reduces material loss and can lower finishing requirements, improving yield per workpiece while supporting efficient chip evacuation in typical turning setups. Does the product data state what accessories are included? The supplied product information does not specify accessories or scope of delivery; check the article listing or ask the distributor for details on holder and insert inclusion for the KL22TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No: 9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, workshop-ready clamping solution that combines left-hand cutting capability, internal coolant and ISO-compatible geometry for reliable turning operations; order directly via Metav Werkzeuge or consult our specialists for application support. PCLNL 2525 clamping holder (PCLN for CNMG) — left-hand, internal coolant — Teknik Makina A PCLNL 2525 clamping holder engineered for left-hand turning with internal coolant, designed to accept CNMG 1204 indexable inserts for secure, repeatable machining. Left-hand cutting orientation Internal coolant feed-through Compatible with CNMG 1204 inserts ISO designation PCLNL 2525 Secure clamping for consistent left-hand turning The holder offers a rigid clamping interface optimised for left-hand cutting, ensuring the insert is held with minimal movement during engagement. Compatibility with CNMG 1204 indexable inserts provides familiar tooling options and predictable chip formation; the geometry and 95° cutting angle support secure insert seating and a stable cutting line. With a 25 mm holder height and an effective cutting head width of 32 mm, the design balances reach with stiffness to reduce chatter and improve surface finish. Coolant-through routing to extend tool life Integrated internal coolant directs cutting fluid close to the cutting edge, improving heat control and chip evacuation in demanding turning cycles. This direct coolant path reduces thermal load on the insert and workpiece, which can extend tool life and maintain dimensional stability during extended runs. The toolholder’s configuration also suits operations where controlled lubrication is required for consistent results and higher material removal rates. Service-friendly components for quick maintenance Maintenance is simplified by standardised auxiliary parts: clamp screw TH821, U plate TA016-1, dowel TS-4 and knee lever TL4 are easy to replace, while a 3 Allen key engagement enables straightforward setup and repeatable torque. The modular component layout reduces spindle downtime and supports quick insert changes, helping to keep production moving with minimal interruption. Compact dimensions for versatile workshop integration Measuring 150 mm overall length and weighing 0.781 kg, this clamping holder integrates into compact tool posts and larger turret systems alike. The nominal holder width 25 mm and cutting height 30 mm suit a wide range of turning applications, from light finishing to heavier profiling passes, while the ISO designation PCLNL 2525 ensures straightforward specification and stock control within existing tool inventories. Talk to Metav Werkzeuge for an application check and tailored advice on integrating Teknik Makina clamping solutions for left-hand turning with internal coolant — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: AP142TM Manufacturer: Teknik Cutting Tools ISO designation: PCLNL 2525 Compatible inserts: CNMG 1204 Facts Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.781 kg Cutting angle: 95° Special features Left-hand cutting orientation Internal coolant feed-through Clamp screw TH821 U plate TA016-1 Dowel TS-4 Knee lever TL4 Allen key: 3 Allen Shank designation: M12-IKG1/8 FAQ Which inserts fit this toolholder? The holder is designed for CNMG 1204 indexable inserts and accepts standard CNMG geometry in the PCLN clamping configuration. Is the coolant routed through the holder? Yes, the toolholder features internal coolant to deliver fluid to the cutting zone and support thermal control. What cutting direction is this holder for? This clamping holder is configured for left-hand cutting operations. How long is the toolholder and how much does it weigh? The toolholder has an overall length of 150 mm and a weight of 0.781 kg, making it suitable for compact and turret-mounted setups. Are replacement clamping parts standardised? Service parts are standardised: clamp screw TH821, U plate TA016-1, dowel TS-4 and knee lever TL4 are specified for straightforward maintenance and replacement. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, rigid toolholding solution that combines secure clamping and through-tool coolant for reliable turning with CNMG inserts — the product's right-hand orientation and ISO designation ensure consistent set-up and repeatable results; order directly via Metav Werkzeuge or ask the technical consultants for application advice. Clamping Holder PCLN for CNMG Indexable Inserts — Right-hand, Internal Coolant (Teknik Makina) The Clamping Holder PCLN for CNMG Indexable Inserts is a right-hand turning toolholder engineered for CNMG 1204 inserts, offering through-tool coolant and an ISO PCLNR 2525 profile for stable, repeatable machining. Right-hand turning orientation Through-tool coolant provision Compatible with CNMG 1204 inserts Increased rigidity for consistent turning accuracy The PCLN-style clamping system delivers a compact, rigid interface that reduces vibration and improves surface finish when turning. With a 25 mm holder height and a head width of 32 mm, the design concentrates mass near the cutting zone to improve stability. The ISO designation PCLNR 2525 indicates a standardised seat that facilitates quick replacement and repeatability. Weight is moderate at 0.781 kg, which assists balanced spindle dynamics while maintaining sufficient mass for dampening. These attributes combine to make the toolholder suitable for repetitive production and short-cycle setups where dimensional consistency is required. Better cooling and chip control for longer insert life Internal coolant is provided to the cutting zone, promoting effective chip evacuation and improved thermal management of the insert. The holder supports CNMG 1204 indexable inserts and is configured for a 95° cutting angle in a right-hand orientation, which helps direct chips away from the workpiece. By maintaining lower cutting temperatures and improved lubrication at the rake and flank faces, the coolant channel extends tool life and reduces the likelihood of built-up edge on challenging materials. In production terms, this translates to fewer insert changes and less unplanned downtime. Fast assembly and straightforward integration into existing toolposts Installation and changeover are simplified by common accessory references: the clamping screw TH821, U-plate TA016-1, dowel TS-4 and clamping lever TL4 are specified for secure fitment. The toolholder’s overall length of 150 mm and a holder width of 25 mm make it compatible with compact tool posts while providing adequate overhang for reach. A single 3 Allen key is used for the primary fastenings, enabling quick insert indexing and repeatable clamping torque. The documented accessory codes support procurement and maintenance planning without guesswork. For dependable right-hand turning with through-coolant capability, contact Metav Werkzeuge for tailored advice or to arrange procurement: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical data Article number: AP132TM Manufacturer: Teknik Makina Designation: PCLN for CNMG Indexable Inserts (PCLNR 2525) Facts Holder height: 25 mm Cutting head width: 32 mm Holder width: 25 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.781 kg Cutting angle: 95° Cutting direction: right Special features Compatible with CNMG 1204 inserts ISO designation PCLNR 2525 Internal coolant: yes Clamping screw: TH821 U-plate: TA016-1 Dowel pin: TS-4 Clamping lever: TL4 Allen key: 3 Allen FAQ What inserts fit this holder? The holder accepts CNMG 1204 indexable inserts and is configured for standard CNMG geometry in a PCLN clamping seat. Is coolant supplied through the holder? Yes, the toolholder features internal coolant delivery to the cutting zone for improved chip control and temperature management. What is the ISO designation of the holder? The toolholder corresponds to PCLNR 2525, which standardises the seat and simplifies replacement and alignment. Which fastening parts are required for assembly? Assembly uses the specified clamping screw TH821, U-plate TA016-1, dowel TS-4 and clamping lever TL4, with a 3 Allen key for tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, internal coolant, and compatibility with DNMG 1506 inserts for consistent machining performance; order the holder directly via Metav Werkzeuge or ask the consultants for specification support. PDJNL 2525 clamping holder — PDJN for DNMG indexable inserts (Teknik Makina) The PDJNL 2525 clamping holder is a left-hand toolholder designed for DNMG 1506 indexable inserts, offering internal coolant delivery for stable external turning and reliable chip control. Left-hand cutting direction Internal coolant channel Compatible with DNMG 1506 inserts Secure clamping via TH825 screw Consistent cutting results through engineered clamping The holder is engineered to ensure a rigid connection between insert and body, reducing chatter and improving surface finish on turned parts. The robust clamping mechanism, secured by the TH825 screw and supporting components such as the TA014-1 locating plate and TS-4 dowel, delivers repeatable positioning and high process stability. For operations requiring predictable dimensional control, the combination of stable fixation and the specified cutting height maintains consistent tool geometry over longer runs. Cooling at the cutting edge improves tool life and cycle reliability Integrated internal coolant directs cutting fluid close to the cutting edge, managing heat at the contact zone and assisting chip evacuation. This targeted supply reduces thermal load on the insert and substrate, which in turn extends the life of indexable tips and reduces the need for unscheduled tool changes. The left-handed orientation coupled with an effective coolant route makes the configuration particularly suitable for facing and external turning where coolant access and temperature control are decisive for productivity. Designed compatibility and practical integration Compatibility with DNMG 1506 inserts and the ISO designation PDJNL 2525 simplifies tooling selection for existing setups. The head width of 32 mm and a cutting height of 40 mm accommodate common insert geometries while the overall length of 150 mm and a compact body height of 25 mm enable installation in confined toolpost spaces. Operators will value that the holder integrates with standard accessory parts—such as the locking lever TL4B and the delivery of a 3 Allen key for assembly—so replacement and setup are straightforward within established workshop processes. For a precise machining upgrade based on Teknik Makina design, contact Metav Werkzeuge for ordering or technical clarification — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: AP124TM Designation: PDJN for DNMG Indexable Inserts ISO designation: PDJNL 2525 Manufacturer: Teknik Makina Facts Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting height: 40 mm Overall length: 150 mm Weight: 0.759 kg Cutting angle: 93° Special features Left-hand cutting direction Internal coolant channel Fits DNMG 1506 indexable inserts Clamping screw: TH825 Locating plate: TA014-1 Dowel: TS-4 Locking lever: TL4B Assembly key: 3 Allen Bar holder designation: M15-IKG1/8 FAQ Which inserts are compatible with this holder? The PDJNL 2525 clamping holder is designed to accept DNMG 1506 indexable inserts and integrates with standard insert geometries for external turning. Is internal coolant provided with the holder? Yes, the toolholder features an internal coolant channel that directs fluid to the cutting zone to help control temperature and assist chip evacuation. What is the cutting direction of the holder? This version is configured for left-hand cutting operations, suitable for facing and external turning where a left-hand approach is required. Which fastening and accessory parts are recommended? Secure clamping is achieved with the TH825 clamping screw; the package references the TA014-1 plate, TS-4 dowel and TL4B locking lever for correct assembly and repeatability. Can the holder be used in compact toolposts? Yes. With a body height of 25 mm and an overall length of 150 mm, the holder is suitable for installations where space is limited while still providing stable support for the insert. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid clamping solution that combines stable machining with straightforward compatibility for common WN-- inserts; the robust 95° cutting geometry and right-hand orientation support consistent turning results. Order the clamp holder directly via Metav Werkzeuge or ask our consultants for specification advice. DWLN Clamp Holder (D179TM) — Right-hand clamp holder for WN-- indexable inserts by Teknik Cutting Tools A durable DWLN clamp holder built for turning operations with WN-- 0604 indexable inserts; designed to secure inserts reliably in short- to medium-length turning tasks Right-hand turning orientation Compatible with WN-- 0604 inserts 32 mm cutting-head width for stability ISO DWLNR 2525 specification Precision clamping for consistent turning quality The holder delivers rigid clamping and predictable tool geometry, which reduces chatter and improves surface finish during turning. With a 25 mm holder height, 32 mm cutting-head width and 26 mm cutting-edge height, the assembly provides a compact footprint while maintaining stiffness across the effective cutting zone. The balanced mass of approximately 0.772 kg and a total length of 150 mm support stable tool behaviour in straightforward setups, making the unit suitable for repetitive machining tasks where repeatability matters. The result is fewer rejects and less rework thanks to controlled tool deflection. Interchangeability and cutting performance to speed production Compatibility with WN-- 0604 indexable inserts and the ISO DWLNR 2525 designation ensures seamless integration into established toolsets and replacement workflows. The clamping screw interface marked M06 allows secure retention and straightforward insert changes, so downtime is kept to a minimum. The holder’s 95° cutting angle combined with its right-hand orientation is optimised for general turning and light face-turning tasks, delivering a balance between cutting edge exposure and flank support. These characteristics make the tool attractive for workshops seeking efficient tool changeovers and predictable cycle times. Built for workshop reliability and straightforward handling Constructed to meet industrial expectations, this clamping solution supports robust daily use and simple maintenance routines. The compact design keeps set-up quick; standardised ISO form and familiar mounting dimensions ease integration into existing tool posts. As a precision partner, Metav presents this holder within a curated supply chain that emphasises availability and quality assurance, so procurement is uncomplicated even for smaller shops. For operations requiring reliable repeatability and reduced setup complexity, this clamping tool represents a pragmatic choice that complements existing turning infrastructure. For reliable right-hand turning operations, specify the Teknik Cutting Tools DWLN clamp holder (SKU D179TM) and contact Metav Werkzeuge for delivery and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: D179TM Brand: Teknik Makina Item: DWLN clamp holder for WN-- indexable inserts ISO designation: DWLNR 2525 Facts Holder height: 25 mm Holder width: 25 mm Cutting-head width: 32 mm Cutting-edge height: 26 mm Total length: 150 mm Weight: 0.772 kg Cutting angle: 95° Cutting direction: right Special features Compatible inserts: WN-- 0604 Boring-bar designation / clamping screw: M06 ISO DWLNR 2525 compliance Compact, stiff design for reduced vibration FAQ What inserts fit this clamp holder? The clamp holder is compatible with WN-- 0604 indexable inserts and is designed to accept that insert form within the DWLN clamping arrangement. Is this holder right-hand or left-hand oriented? This tool is a right-hand turning holder, optimised for standard right-hand cutting directions. What is the ISO designation for this tool? The clamping tool follows the ISO DWLNR 2525 designation, ensuring interchangeability with matching tooling standards. Which screw or boring-bar interface is used for insert clamping? The holder uses a clamping interface identified as M06, facilitating secure retention of the insert. What are the key dimensions to check for mounting? Critical dimensions include a 25 mm holder height, 32 mm cutting-head width, 26 mm cutting-edge height and a total length of 150 mm—these determine suitability for tool-post geometry and overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, right‑hand turning solution that combines secure clamping with straightforward compatibility for KNUX 1604 inserts; the compact dimensions and M16 mounting reduce setup time and provide consistent cutting geometry for repeatable results. Order the CKJN toolholder directly via Metav Werkzeuge or consult the Metav team for technical guidance. CKJN Toolholder (CKJNR 2525) – right‑hand turning holder for KNUX 1604 by Teknik Makina A CKJN for KNUX Indexable Inserts toolholder designed for right‑hand turning, offering rigid clamping and precise insert positioning in machining centres and lathes Right‑hand turning holder CKJNR 2525 Fits KNUX 1604 indexable inserts M16 shank mounting, 150 mm overall length 25 mm shank height, 30 mm head width Engineered for reliable right‑hand turning performance The CKJN turning holder delivers a pragmatic balance between rigidity and accessibility, making it suitable for serial turning and workshop use. With a defined cutting angle of 93°, the holder maintains a stable cutting geometry that helps to reduce vibration and supports consistent chip formation. Compatibility with KNUX 1604 indexable inserts ensures a familiar insert form factor, so tooling systems and inventory remain consolidated. The robust clamping design secures the indexable insert to maintain cutting edge position under load, which translates into predictable surface finish and repeatable cycle times. Practical dimensions that simplify setup and tool management Measured values such as 150 mm overall length, 25 mm shank height, and 30 mm head width make the holder straightforward to integrate on standard tool posts and turrets. The M16 mounting interface provides a common connection that reduces adaptor requirements and speeds changeovers. At 0.753 kg, the holder is substantial enough to dampen minor chatter while remaining light enough for dynamic turret indexing. These dimensional choices result in easier tool presetting and reduced downtime between operations, supporting a more efficient production rhythm. Designed to support accurate insert positioning and shop reliability The CKJNR 2525 designation reflects an industry‑standard form factor that helps with procurement and interchangeability across turning applications. The defined cutting height of 35 mm aligns the insert edge consistently relative to the workpiece, lowering the need for repeated offsets during setup. As a right‑hand holder, it is optimised for conventional turning directions and is suitable for a wide range of steels and general workshop materials when used with the appropriate grades of KNUX 1604 inserts. The compact head geometry aids access in confined tool stations while preserving the clamping force required for secure cutting. Contact Metav Werkzeuge for tailored advice on Teknik Makina toolholders and to discuss suitable insert grades or mounting options directly with the Metav technical team in Emmerich Technical Data Article number: RD014TM Manufacturer: Teknik Makina Designation: CKJN for KNUX Indexable Inserts Facts Overall length: 150 mm Shank height: 25 mm Head width: 30 mm Cutting height: 35 mm Cutting angle: 93° Weight: 0.753 kg Special features Iso designation: CKJNR 2525 Compatible inserts: KNUX 1604 Mounting: M16 Cutting direction: right FAQ What insert type does this holder accept? The holder accepts KNUX 1604 indexable inserts; the CKJNR 2525 form factor is matched to that insert geometry for secure seating and correct cutting edge exposure. Is this a right‑hand or left‑hand toolholder? This turning holder is a right‑hand orientation, designed for conventional right‑hand turning operations. What is the mounting specification for the shank? The holder uses an M16 mounting interface and an overall length of 150 mm, enabling straightforward integration into standard turret stations and tool posts. How does the cutting angle affect machining? A 93° cutting angle provides a controlled cutting geometry that helps maintain stability and consistent chip flow, supporting repeatable surface quality across batches. Which ISO designation applies to this holder? The toolholder carries the CKJNR 2525 ISO‑style designation, indicating its shank form and suitability for the specified insert type. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust right-hand clamp holder with ISO PWLNR 2525 compatibility and a precise 95° cutting angle to improve turning stability and repeatability on worn or new tool posts; benefit from a standardised 150 mm overall length that eases machine setup. Order the clamp holder directly via Metav Werkzeuge or ask our consultants if needed. Clamp holder PWLN for WNMG indexable inserts — right-hand turning toolholder (PWLNR 2525) The Clamp holder PWLN for WNMG indexable inserts is a right-hand turning toolholder designed for secure clamping of WNMG 0804 inserts in CNC and manual lathe operations, offering standard ISO fitting and a compact 150 mm overall length. *Right-hand turning toolholder PWLN form *Compatible with WNMG 0804 indexable inserts *ISO designation PWLNR 2525 for standardised fitting *150 mm overall length and 95° cutting angle Precise clamping for stable turning performance The clamp holder delivers consistent tool positioning through a dedicated clamping geometry that suits WNMG 0804 inserts and an M08 clamping screw interface. The specified clamping height and cutting height coordination ensures repeatable centreline position, reducing setup variation and enhancing process reliability. This solid interface is especially useful where insert repeatability is critical for batch consistency and tool-change routines. Standardised form factor for faster machine integration Built to the PWLN form and bearing the ISO PWLNR 2525 designation, the toolholder fits common turret and toolpost arrangements with minimal adaptation. The 150 mm overall length and compact head dimensions (head width 32 mm, holder width 25 mm) support close radius work and reduce interference on multi-holder setups. Standardisation simplifies inventory and replacement strategies across production lines. Balanced mass and geometry to reduce vibration With a mass of 0.773 kg, the holder provides sufficient inertia to assist in damping vibration in interrupted cut scenarios without adding excessive load to the turret. The 95° cutting angle gives a favourable clearance and approach for general turning tasks, improving chip flow and surface finish. Such mechanical consistency contributes directly to longer insert life and fewer rework cycles. Practical applications and workshop advantages Engineered for everyday turning and profiling tasks, the holder suits workshops that require straightforward interchangeability with WNMG inserts and consistent performance. The right-hand orientation and the product’s compact footprint make it appropriate for both finish and light roughing operations on medium-duty lathes. For production environments seeking reduced tool-change complexity, the standard form and ISO conformity support streamlined work processes and predictable tool behaviour. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Cutting Tools clamp holder into existing tool setups and for ordering information; Metav Werkzeuge can provide fast guidance from Emmerich and support supply to the workshop. Technical Data Article number: P151TM Manufacturer: Teknik Makina Designation (EN): PWLN for WNMG Indexable Inserts ISO designation: PWLNR 2525 Facts Overall length: 150 mm Cutting height: 38 mm Holder height: 25 mm Cutting head width: 32 mm Holder width: 25 mm Weight: 0.773 kg Cutting angle: 95° Compatible insert type: WNMG 0804 Cutting direction: right Special features M08 clamping screw interface Right-hand toolholder configuration Standardised PWLN form for modular setups Compact head suitable for close-radius operations FAQ What inserts fit this clamp holder? The clamp holder accepts WNMG 0804 indexable inserts; the holder’s geometry and clamping interface are matched to this insert size for secure seating and repeatable positioning. Is this toolholder right- or left-hand? This turning holder is configured for right-hand cutting, as specified in the technical data for P151TM. What is the ISO designation of the holder? The toolholder carries the ISO designation PWLNR 2525, enabling straightforward replacement within standardised tool systems. How does the 95° cutting angle affect machining? A 95° cutting angle provides a favourable approach and clearance for general turning, improving chip evacuation and contributing to a consistent surface finish. Can Metav Werkzeuge supply installation guidance? Metav Werkzeuge can advise on mounting and integration; contact details are provided below and assistance is available from the Emmerich location. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust right-hand turning geometry, reliable internal coolant and ISO SDJCR 2525 compatibility for consistent cycle times and predictable tool life — order the toolholder directly via Metav Werkzeuge or contact our advisors for tailored integration advice. AP512TM — SDJCR 2525 turning toolholder (right-hand, internal coolant) by Teknik Makina The AP512TM is a right-hand SDJCR 2525 turning toolholder engineered for ISO DCMT 11T3 indexable inserts, intended for precision external turning in production and job-shop environments. Right-hand turning configuration Internal coolant supply Compatible with DCMT 11T3 inserts Solid 25 x 25 mm SDJCR 2525 shank Improved process stability through coolant-fed chip control The integrated internal coolant channel delivers coolant directly to the cutting zone, supporting reliable chip evacuation and reducing heat build-up. For production environments this means longer insert life and fewer unscheduled tool changes; when using DCMT 11T3 inserts the coolant feed helps maintain cutting-edge integrity during prolonged cuts. The design is therefore suited to repetitive turning tasks where maintaining consistent surface finish and cycle times is a priority. Secure clamping for repeatable accuracy Clamping is handled by the TA030 clamp plate and an M3.5x11 Torx screw, tightened with a T15 key, providing a robust and repeatable seat for the insert. This mechanical arrangement reduces micro-movement under load and ensures repeatability between insert changes, which translates into stable part tolerances and reduced rework. The solid interface is beneficial when machining with intermittent cuts or under higher radial forces. Geometry tuned for precision turning results The toolholder’s geometry — a 93° cutting angle and a set cutting-edge height 35 mm — positions the insert for controlled engagement and predictable chip formation. The right-hand orientation and the SDJCR format deliver an optimised approach angle for external contours and shoulder work, helping to achieve tight dimensional control without complex tool set-ups. Compact format with straightforward integration With a compact 150 mm length and a mass of 0.735 kg, the holder balances stiffness and accessibility for confined tool stations. The SDJCR 2525 designation reflects the 25 x 25 mm shank dimensions for standard turret and toolpost systems, and compatibility with M11-IK boring-bar interfaces simplifies integration into existing toolbanks. For workshops that prioritise quick insert swaps and minimal inventory, this indexable insert holder supports efficient tool management and predictable maintenance intervals. The AP512TM is therefore a practical choice for both small batch and continuous turning operations. Contact Metav Werkzeuge in Emmerich for purchasing or technical advice on Teknik Makina’s SDJCR 2525 right-hand toolholder — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and delivery from the Emmerich warehouse Technical Data Article number: AP512TM Manufacturer: Teknik Makina ISO designation: SDJCR 2525 Facts Shank dimensions: 25 x 25 mm Head width: 32 mm Toolholder height: 25 mm Cutting-edge height: 35 mm Overall length: 150 mm Weight: 0.735 kg Cutting angle: 93° Features Internal coolant: yes Compatible inserts: DCMT 11T3 Clamp plate: TA030 Torx screw: M3,5x11 Torx key size: T15 Orientation: right-hand Boring bar compatibility: M11-IK FAQ Which insert type fits this toolholder? The AP512TM is designed for DCMT 11T3 indexable inserts and secures them with the TA030 clamp plate and M3.5x11 Torx screw. Is there internal coolant on this holder? Yes, the toolholder features internal coolant supply to the cutting zone to aid chip evacuation and prolong insert life. What are the shank dimensions and fitting standard? The holder uses a 25 x 25 mm shank, specified by the ISO designation SDJCR 2525, for standard turret and toolpost mounting. Which screw and key are required for insert clamping? Clamping is performed with an M3.5x11 Torx screw; a T15 Torx key is the correct tool for assembly and torque application. Is the AP512TM suitable for heavy cuts? The rigid clamping system and solid 25 x 25 mm shank provide good stiffness for demanding turning operations; however, final suitability depends on cutting parameters and insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure clamping, ISO-standard compatibility and a compact 150 mm design to keep turning operations predictable and productive; order directly via Metav Werkzeuge or consult the technical team for tailored advice. Teknik Makina Clamping Toolholder SVJC (SVJCR 2525) – for VCMT 1103 inserts, right-hand The SVJC for VCMT Indexable Inserts is a robust clamping toolholder designed for right-hand turning operations with VCMT 1103 indexable inserts. SVJCR 2525 ISO designation For VCMT 1103 indexable inserts Right-hand turning orientation Robust 150 mm overall length Consistent turning performance through ISO conformity The SVJCR 2525 designation signals a familiar and widely accepted interface for industrial turning applications. With an overall length of 150 mm and a compact cutting head width of 32 mm, this clamping toolholder is engineered to deliver repeatable positioning and stable chip control in serial production. The combination of a defined ISO shank and standard insert form ensures effortless replacement of VCMT 1103 plates and reduces changeover time, which supports predictable cycle times on multi-shift lathes. Secure clamping and mechanical reliability Designed for reliable insert retention, the holder offers a secure clamping concept that complements the 40 mm cutting height and a 93° cutting angle to maintain cutting geometry under load. The unit’s modest mass of 0.738 kg contributes to dynamic stability without excessive inertial loads on tool turrets. The M11 bore/thread provides the interface required for common clamping screws, ensuring a firm mechanical connection between holder and insert. These technical characteristics reduce the risk of chatter and contribute directly to surface finish consistency. Practical workshop design that speeds up set-up A narrow holder width of 25 mm and a holder height of 25 mm allow installation in compact tool turrets and on smaller toolposts while retaining sufficient rigidity for medium duty turning. Compatibility with VCMT 1103 indexable inserts simplifies inventory management for workshops running standard carbide plates. By using standard insert geometry and an ISO-aligned holder, maintenance routines are streamlined and spare-part lists are shortened, which supports continuous production and lowers logistical complexity. Clear selection and installation guidance for machinists This clamping toolholder is intended for right-hand turning applications and pairs specifically with VCMT 1103 plates; verify turret clearance and insert orientation before mounting. The SVJC clamping toolholder is suitable for shops seeking a standardised holder that integrates into existing tool families without requiring special adaptors. For efficient installation, ensure the correct M11 fixing hardware is used and that the insert seat is free of chips to guarantee optimal clamping force and repeatable geometry. For bespoke technical advice and reliable supply from Emmerich, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 regarding the Teknik Makina SVJC clamping toolholder (SKU D243TM) Technical Data Article number: D243TM Brand: Teknik Makina ISO designation: SVJCR 2525 For inserts: VCMT 1103 Facts Overall length: 150 mm Weight: 0.738 kg Cutting head width: 32 mm Holder height: 25 mm Holder width: 25 mm Cutting height: 40 mm Cutting angle: 93° Direction of cut: right Special features Compatible with VCMT 1103 indexable inserts Bore/thread: M11 Suitable for right-hand turning operations Compact design for reduced turret interference FAQ Which indexable inserts fit this toolholder? The SVJC clamping toolholder is designed for VCMT 1103 indexable inserts and accepts the standard insert geometry associated with that designation. Is the holder suitable for left-hand turning? This holder is specified for right‑hand turning operations; a left‑hand variant would be required for left‑hand machining. What is the ISO designation and why is it important? The toolholder carries the SVJCR 2525 ISO designation, which ensures compatibility with standardised turret mounts and predictable insert seating for straightforward replacement. What are the key dimensions to check before mounting? Relevant dimensions include overall length 150 mm, holder height 25 mm, and cutting head width 32 mm; verify turret clearance accordingly. Which fixing thread is used for the clamping screw? The holder uses an M11 bore/thread for the clamping screw interface as specified. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of secure clamping for WNMG 0604 inserts, a precise 95° cutting angle and compact dimensions to keep turning operations reliable and efficient. Order the Klemmhalter directly via Metav Werkzeuge or consult the specialists for technical advice. Klemmhalter — PWLN holder for WNMG indexable inserts by Teknik Cutting Tools, right‑hand, 95° The Klemmhalter is a right‑hand external turning holder designed for WNMG 0604 indexable inserts, offering a compact solution for general turning and finishing operations. Secure clamp for WNMG 0604 inserts 95° cutting angle for versatile turning Compact 150 mm overall length ISO PWLNR 2525 designation Faster set-up and assured insert compatibility The holder is engineered to reduce set‑up time through a straightforward clamping concept compatible with WNMG 0604 inserts and the ISO designation PWLNR 2525. The integrated clamping interface with M06 fastening enables quick insert changes and repeatable seating, which in turn lowers downtime and improves process consistency. For shops migrating to standardised tooling, this toolholder simplifies inventory while maintaining secure clamping and predictable cutting geometry. Rigidity and geometry that improve surface quality Built with a focus on stability, the toolholder’s geometry delivers a reliable support zone at the cutting edge. The 95° cutting angle produces a balanced force distribution during external turning, helping to reduce chatter and extend insert life. With a cutting height of 30 mm, a head width of 32 mm and a holder height of 25 mm, the design promotes consistent chip control and surface finish, particularly in finishing passes where dimensional repeatability is essential. Compact form factor for versatile mounting and access The modest overall length of 150 mm and a mass of 0.758 kg provide a good compromise between reach and rigidity. The right‑hand orientation and standard shank dimensions make the holder suitable for many toolposts and turrets without extensive modification. This compact footprint supports easier access in tight setups and facilitates faster tool exchanges during batch production, helping to keep cycle times down in routine operations. Practical benefits for everyday workshop use In daily use the holder delivers measurable benefits: quicker tool changes, consistent cutting geometry and fewer re‑set operations. The combination of standard insert compatibility and robust clamping contributes to reduced tooling complexity and predictable machining outcomes. For manufacturers seeking straightforward, dependable turning solutions, this holder offers a pragmatic balance between performance and ease of use. For secure clamping with the Teknik Cutting Tools PWLN holder and advice on application or ordering, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: P161TM Manufacturer: Teknik Makina Type: PWLN for WNMG indexable inserts ISO designation: PWLNR 2525 ECLASS: 21181004 Cutting direction: right Facts Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Cutting angle: 95° Weight: 0.758 kg Special features Compatible with WNMG 0604 inserts Clamping thread / fastening: M06 Right‑hand external turning holder Compact design for standard turrets and toolposts FAQ Which inserts fit this holder? The holder accepts WNMG 0604 indexable inserts; compatibility is based on the PWLN interface and the ISO designation PWLNR 2525. Is the holder right‑hand or left‑hand? This is a right‑hand external turning holder, suitable for standard right‑hand turning operations. What are the key dimensions to check for mounting? Important dimensions are overall length 150 mm, holder height 25 mm, head width 32 mm and cutting height 30 mm for verifying fit in the turret or toolpost. What fastening is used for the clamp? The clamping screw designation provided is M06, which secures the insert firmly in the pocket. What is the SKU and who supplies the tool? The SKU is P161TM and the tool is supplied by Teknik Cutting Tools, distributed via Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of reliable clamping, compact dimensions and internal coolant delivery to maintain consistent turning results with indexable WNMG inserts; order through Metav Werkzeuge or consult their specialists for machining guidance and supply. Klemmhalter — PWLN for WNMG indexable inserts, right‑hand, internal coolant by Teknik Makina Klemmhalter is a right‑hand turning tool holder designed for secure use with WNMG 0604 indexable inserts in medium‑duty turning applications, offering internal coolant and an ISO PWLNR 2525 form for consistent set‑up. Right‑hand turning holder for WNMG inserts Internal coolant for stable chip evacuation 95° cutting angle for robust depth control ISO PWLNR 2525 form, 150 mm overall length Consistent clamping for repeatable turning quality The tool holder delivers repeatable clamping through a proven clamping system compatible with WNMG 0604 insert geometry, reducing variability between setups. With an effective 95° cutting angle and a cutting height of 30 mm, the design supports stable engagement and predictable cutting forces, which helps to lower scrap rates and maintain surface finish across batches. The ISO designation PWLNR 2525 ensures straightforward replacement and integration in standard tool lists. Improved machining performance via controlled coolant and rigidity Internal coolant routing is incorporated to enhance chip control and cooling at the cutting edge; this lowers tool wear and contributes to longer insert life during sustained cutting. The holder’s head width of 32 mm and body dimensions provide stiffness while keeping the overall length at 150 mm for good reach into common setups. Measured mass (0.756 kg) adds inertia to resist vibration without excessive overhang, supporting higher material removal rates and efficient cycle times in production environments. Practical connection and service features that reduce downtime The clamping arrangement is maintained with standard components for quick service: clamping screw TH617, U‑plate TA021, dowel TS3 and knee lever TL3 are specified for repeatable assembly. Adjustment and maintenance require only a 2.5 Allen key, enabling fast insert changes and minimal workshop intervention. Together these elements shorten setup times and simplify changeovers, delivering measurable productivity benefits on the shop floor. For application advice or to secure Teknik Cutting Tools’ PWLN clamping holder (SKU AP161TM) directly from Metav Werkzeuge — contact the Metav technical team in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast supply and machining recommendations Technical data SKU: AP161TM Brand: Teknik Makina Type: PWLN for WNMG indexable inserts Height: 25 mm Head width: 32 mm Body width: 25 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.756 kg Cutting angle: 95° Compatible inserts: WNMG 0604 Internal coolant: yes Clamping screw: TH617 U‑plate: TA021 Dowel: TS3 Knee lever: TL3 Allen key: 2.5 (required) Bar designation: M06-IKG1/8 ISO designation: PWLNR 2525 Cutting direction: right FAQ Which insert size is specified for this holder? The holder is specified for WNMG 0604 inserts and is manufactured to the ISO form PWLNR 2525, ensuring correct seat geometry for that insert type. Does the holder support internal coolant delivery? Yes, the Teknik Makina PWLN clamping holder (SKU AP161TM) features internal coolant, improving chip evacuation and tool life under continuous turning. What is the cutting direction and typical application? This is a right‑hand turning holder intended for conventional external turning operations with indexable WNMG inserts in general machining. Which fastenings and tools are required for insert changes? Insert clamping uses the TH617 clamping screw with the supplied U‑plate TA021; assembly and insert changes can be performed with a 2.5 Allen key and the standard dowel TS3 and knee lever TL3 for secure locating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust clamping, internal coolant and precise cutting geometry to secure stable turning performance; the right‑hand PWLN holder ensures reliable seating of WNMG 0804 inserts and straightforward integration via Metav Werkzeuge for machining continuity and procurement support. PWLN for WNMG Indexable Inserts — PWLNR 2525 toolholder (right‑hand, internal coolant) The PWLN for WNMG Indexable Inserts is a right‑hand turning toolholder designed for WNMG 0804 inserts, offering internal coolant and a compact 25 × 25 mm shank for consistent lathe mounting Right-hand toolholder for turning applications Fits WNMG 0804 indexable inserts Internal coolant for controlled lubrication Robust 25 × 25 mm shank, 150 mm overall length Reliable clamping for consistent turning results A stable clamp interface is central to repeatable turning. The toolholder, specified as PWLNR 2525, combines a 25 × 25 mm shank with a sturdy clamp screw (TH821) to secure WNMG inserts with minimal radial runout. This translates into consistent cutting forces and reduced vibration, which helps maintain tolerances over batch runs; the moderate mass (0.782 kg) delivers good inertial damping without adding excessive load on tool posts. Optimised chip control and coolant delivery Built‑in internal coolant channels enable targeted coolant delivery directly to the cutting zone, improving chip evacuation and thermal management. For operations requiring sustained contact with the workpiece, this feature reduces heat build‑up at the cutting edge and can extend insert life. Controlled lubrication also contributes to a cleaner surface finish and lowers the risk of built‑up edge when machining challenging materials with indexable inserts. Precision geometry for dependable right‑hand turning The holder’s 95° cutting angle and defined head geometry position WNMG 0804 inserts for predictable engagement in right‑hand turning. With a cutting height of 38 mm and a cutting‑head width of 32 mm, the assembly provides a balance between rigidity and accessibility at the tool tip. This geometry supports stable chip flow and predictable tool behaviour, which is particularly beneficial for repeatable facing and light to medium turning tasks. Straightforward assembly and maintenance on the shop floor Installation and routine upkeep are simplified by the included accessory interfaces: U‑plate TA020‑1, dowel TS‑4, lever TL4 and the matching 3‑Allen key. These parts enable rapid mounting and secure clamping of inserts without specialised jigs. The overall length of 150 mm offers a compact footprint while the standardised ISO designation aids compatibility checks when replacing holders or organising tooling inventories. Contact Metav Werkzeuge to discuss Teknik Cutting Tools’ right‑hand PWLN toolholder with internal coolant and confirm suitability for specific turning tasks — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: AP151TM Manufacturer: Teknik Makina Designation: PWLN for WNMG Indexable Inserts (PWLNR 2525) SKU: AP151TM Facts Shank: 25 × 25 mm Cutting head width: 32 mm Cutting height: 38 mm Overall length: 150 mm Weight: 0.782 kg Cutting angle: 95° Cutting direction: right‑hand Compatible inserts: WNMG 0804 Special features Internal coolant Clamp screw: TH821 U‑plate: TA020-1 Dowel: TS-4 Lever: TL4 Allen key: 3 Allen ISO designation: PWLNR 2525 Drill rod: M08-IKG1/8 FAQ What inserts are supported by this holder? The holder accepts WNMG 0804 indexable inserts; the toolholder is supplied in the PWLNR 2525 format for standard lathe tool posts. Is the coolant internal or external? This turning holder features internal coolant, which delivers lubrication directly to the cutting zone for improved chip control and thermal management. Which handedness does the toolholder have? The holder is configured for right‑hand cutting, matching common turning orientations for facing and external turning operations. What are the key mounting components supplied or required? Mounting and clamping use standard parts such as the TH821 clamp screw, U‑plate TA020‑1, dowel TS‑4 and lever TL4; a 3‑Allen key is specified for assembly. How does the holder geometry affect machining stability? The 95° cutting angle and compact head dimensions position the insert for stable engagement, promoting consistent cutting forces and repeatable surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid, workshop-ready tool holder that combines straightforward clamping with standardised compatibility; the 20 mm diameter and 150 mm overall length deliver stable cutting conditions for indexable-insert operations. Order directly via Metav Werkzeuge or consult the specialist team for application advice. Boring bar K259TM — SDUC holder for DC-- indexable inserts, Ø20 mm × 150 mm (Teknik Makina) Boring bar K259TM is a compact SDUC-style holder designed for DC-- 11T3 indexable inserts, intended for precision turning and light boring tasks in CNC and turret applications SDUC holder for DC-- 11T3 indexable inserts Diameter 20 mm for improved rigidity Overall length 150 mm, ISO S16M SDUCL Torx clamping screw M3.5×8.5, key T15 Greater process stability from a compact design The holder’s 20 mm diameter and 150 mm overall length provide increased stiffness compared with slimmer alternatives, which helps to reduce vibration and improve surface finish during turning operations. For setups where tool overhang is restricted, the compact profile supports consistent cutting conditions and repeatable results. The holder is identified by the ISO S16M SDUCL designation, ensuring compatibility with common turret and toolpost interfaces and simplifying tool-life planning in production workflows. Secure, straightforward insert clamping for fast changeovers Insertion and removal of the cutting tip is handled by a Torx screw M3.5×8.5 secured with a T15 key, allowing reliable mechanical clamping without specialised fixtures. The simple clamping mechanism reduces changeover time and minimises the risk of incorrect seating, which supports higher machine utilisation and predictable part quality. The holder accepts DC-- 11T3 indexable inserts, a widely used geometry that enables shops to keep stock of versatile cutting edges for finishing and light roughing tasks. Suited to precision workshops and small-batch production Designed for CNC workshops and toolrooms that prioritise predictable performance, the tool holder is ideal where compact tool setups and fast insert replacement are needed. The modest mass (approx. 0.246 kg) keeps turret load low and assists rapid acceleration on modern machines, while the SDUC configuration aligns with established indexable-insert systems. This combination of features makes the holder a practical choice for milling and turning centres handling frequent tool changes and mixed-series production. Simple integration and reliable supply chain With the clear ISO designation and standard clamping hardware, the holder fits into existing tool inventories with minimal adaptation. The robust mechanical design supports frequent insert changes with little maintenance beyond routine inspection of the screw and seating face. Supplied by Teknik Makina under SKU K259TM, the component is intended as a straightforward, serviceable element in a larger tooling strategy, helping to reduce procurement complexity and downtime. For supply, compatibility checks and tailored advice on integrating the SDUC system into existing toolsets, contact Metav Werkzeuge for prompt technical guidance and reliable delivery from Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K259TM Manufacturer: Teknik Makina ISO designation: S16M SDUCL Suitable for inserts: DC-- 11T3 Facts Diameter: 20 mm Overall length: 150 mm Weight: 0.246 kg Special features Torx clamping screw M3.5×8.5 Torx key size T15 SDUC-style holder for indexable inserts FAQ What insert type does the holder accept? The holder accepts DC-- 11T3 indexable inserts; compatibility is stated in the product description for the boring bar K259TM supplied by Teknik Makina. What are the key dimensions of the tool? The tool has a 20 mm diameter and 150 mm overall length, registered under ISO S16M SDUCL with article number K259TM. Which clamping screw and key are required? Clamping is secured with a Torx screw M3.5×8.5 using a T15 key for reliable insert fixation. Is this holder suitable for high-speed CNC turning? The holder’s compact geometry and standardised ISO designation make it suitable for many CNC turning setups; ensure machine and insert selection match the intended cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise ISO conformity, compact dimensions and quick clamping to maintain efficient production. Order directly via Metav Werkzeuge or consult the team for application-specific advice. S16M SDUCR boring bar — Teknik Cutting Tools, right‑hand, 16 mm × 150 mm The S16M SDUCR is a right‑hand boring bar engineered for turning operations with DC‑11T3 indexable inserts, suited to general machining where tool rigidity and fast indexable‑insert changes are required. S16M SDUCR design for indexable inserts 16 mm diameter, 150 mm overall length Right‑hand cutting direction for turning Torx M3.5×8.5 screw; T15 key Stable performance for indexable‑insert turning The toolholder is designed around the indexable insert system to deliver predictable cutting performance and reduced lifecycle costs. The ISO designation S16M SDUCR signifies a 16 mm shank and the specific clamping geometry for DC‑11T3‑style inserts; this compatibility simplifies tool sourcing and ensures consistent seating of the cutting insert. The robust connection between holder and insert helps to maintain cutting parameters, which in turn reduces vibration and improves surface finish — a rational benefit for batch production and quality‑sensitive operations. Compact dimensions that enhance accessibility and rigidity With a 16 mm diameter and 150 mm overall length, the tool provides a balance between reach and stiffness that is useful in confined setups or on smaller lathes. The relatively short overhang reduces deflection under load, translating into more stable cuts and repeatable tolerances. The modest mass (approx. 0.246 kg) eases handling during tool changes while keeping the assembly rigid enough for typical turning tasks, making the toolholder suitable where compactness and precision are required. Quick clamping and predictable tool changes Clamping is achieved with a Torx M3.5×8.5 screw and requires a T15 key, allowing fast, secure insert retention and minimised downtime during indexable insert replacement. The right‑hand cutting orientation is compatible with standard lathe setups and cutting strategies; together, these features support efficient tool management on the shop floor. The result is a pragmatic workflow improvement: fewer interruptions, consistent clamping torque and stable cutting geometry for every indexable‑insert change. Discuss application needs with Metav Werkzeuge and request the Teknik Cutting Tools S16M SDUCR boring bar for reliable, time‑efficient indexable‑insert turning — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K129TM Brand: Teknik Makina ISO designation: S16M SDUCR Facts Diameter: 16 mm Overall length: 150 mm Weight: 0.246 kg Cutting direction: right Special features For indexable inserts DC-- 11T3 Torx screw M3.5×8.5 Torx key size T15 S16M SDUCR design for insert clamping FAQ Which inserts are compatible with this toolholder? The holder is designed for DC‑11T3 indexable inserts and is supplied in the S16M SDUCR configuration for reliable seating and cutting performance. Is the cutting direction right or left? This boring bar is specified for right‑hand cutting, matching common lathe configurations and standard turning strategies. What fastening hardware is used for the insert? Insert clamping uses a Torx M3.5×8.5 screw and requires a T15 key for secure and repeatable tightening on the Teknik Cutting Tools S16M SDUCR toolholder (SKU K129TM). Will the shank size fit compact toolposts? The 16 mm shank diameter and 150 mm overall length make the tool suitable for compact setups where a balance of reach and rigidity is needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of rigidity and insert compatibility: the S32T DDWNR boring bar offers a Ø32 mm shank for secure clamping and is designed for DN--1506 indexable inserts to keep cycle times consistent; order the tool directly via Metav Werkzeuge or consult our specialists for machining advice. S32T DDWNR boring bar — 62.5° cutting angle, for DN--1506 indexable inserts (Teknik Makina) S32T DDWNR is a precision turning tool holder intended for stable indexable-insert machining in right-hand operations and demanding workshop environments. 62.5° cutting angle for stable cuts Compatible with DN--1506 inserts Ø32 mm shank for rigid clamping 300 mm overall length, 55 mm cutting height Stable geometry for consistent chip control and accuracy The holder’s 62.5° cutting angle and rigid construction ensure predictable cutting forces and improved surface finish during turning operations. With the ISO designation S32T DDWNR, the design reduces vibration and deflection compared with less rigid holders, which translates into fewer reworks and longer insert life. The geometry supports reliable chip evacuation when used with appropriately chosen indexable inserts, helping to keep cycle times steady. Proven insert system for quick indexability and serviceability Designed for DN--1506 indexable inserts, the holder simplifies tool changes and repeatable set-up. Using standardised insert shapes reduces tool inventory complexity while maintaining cutting performance: worn edges are replaced rather than the whole tool, lowering running costs over time. The right-hand cutting orientation and secure insert seating mean minimal adjustment is required after each replacement, supporting uninterrupted production runs. Practical dimensions that balance reach and rigidity The tool features a Ø32 mm shank for rigid clamping and a 300 mm overall length, providing a good balance between reach and stiffness for a broad range of turning tasks. A 55 mm cutting height ensures the insert sits at the correct centreline in many lathe toolposts, while the overall mass (1.859 kg) contributes to damping during cuts. These dimensions help to maintain concentricity and repeatability, particularly in medium-duty to heavy-duty turning operations where stability is essential. Integrating the holder into a reliable workflow As part of a focused tooling strategy, this holder streamlines set-up times and reduces variances in part quality. Compatibility with widely used indexable inserts reduces procurement friction, and the ISO-compliant S32T DDWNR designation simplifies machine-side programming and tool library entries. For workshops aiming to improve throughput without compromising finish, the holder combines practical ergonomics with industrial robustness, supporting both short runs and longer production cycles. Discuss the S32T DDWNR boring bar with Metav Werkzeuge for tailored recommendations and secure precision tooling — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: K464TM ISO designation: S32T DDWNR For inserts: DN-- 1506 Manufacturer: Teknik Makina Cutting direction: right Facts Shank diameter: 32 mm Overall length: 300 mm Cutting height: 55 mm Cutting angle: 62.5° Weight: 1.859 kg Diameter: 40 Special features Compatible with DN--1506 indexable inserts Right-hand cutting orientation Designed for rigid clamping and low vibration S32T shank standard for secure mounting FAQ Which inserts fit this tool holder? The holder is specified for DN--1506 indexable inserts, which are the intended cutting elements for this Teknik Makina S32T DDWNR tool (SKU K464TM). What shank size and mounting standard does it use? The tool uses a Ø32 mm shank and the ISO-style designation S32T DDWNR, ensuring compatibility with standard toolposts and clamping fixtures designed for S32T holders. Is the cutting direction right- or left-handed? The holder is configured for right-hand cutting, suitable for conventional right-handed turning operations. What are the key dimensions to consider for set-up? Key dimensions are 300 mm overall length, 55 mm cutting height, Ø32 mm shank, and a 62.5° cutting angle; these determine reach, centreline alignment and rigidity for the machining task. Is the holder suitable for long runs and frequent insert changes? Yes — the ISO S32T DDWNR design and use of DN--1506 inserts make the holder appropriate for repeated insert changes and longer production runs, supporting steady productivity and straightforward maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Turning Holder SDHC for DCMT Indexable Inserts by Teknik Makina The Turning Holder SDHC for DCMT Indexable Inserts is a precision clamping solution for turning applications, designed to secure DCMT 11T3 indexable inserts for reliable metalcutting operations. Teknik Makina Turning Holder SDHCR 2525 for DCMT 11T3 Secure clamping with robust SDHC design 150 mm overall length for standard toolposts Right-hand cutting with 107.5° cutting angle Compact head width 32 mm for versatile access Durable clamping and consistent cutting performance Built for repeatable results, this Turning Holder features the SDHCR 2525 ISO design that delivers stable insert seating and reduced vibration. The holder’s construction supports consistent chip flow and improved surface finish, making it suitable for serial turning tasks. With a focus on repeatability, the design reduces setup times and minimises downtime, ensuring efficient machining across batches. Compatibility with DCMT 11T3 inserts for flexible tooling Engineered specifically for DCMT 11T3 indexable inserts, the holder enables quick insert changes and secure fixation. This compatibility simplifies tooling logistics and allows workshops to use a common insert family across multiple operations. The targeted fit helps maintain cutting geometry and prolongs insert life by ensuring correct seating and pressure distribution during cutting. Compact dimensions for better accessibility and tool life The holder’s compact head width of 32 mm and a tool body of 25 mm x 25 mm allow access to confined areas while maintaining rigidity. Reduced overhang and a 150 mm overall length lower bending moments and extend tool and insert life. For operations where reach and stiffness must be balanced, this design offers improved stability without sacrificing access to tight workpiece features. Designed for workshop reliability and simple integration Manufactured by Teknik Makina, the holder is built to integrate smoothly into standard toolposts and setups. The right-hand cutting orientation and a precise 107.5° cutting angle deliver predictable chip control and repeatable results on common turning materials. For maintenance and replacement planning, the clear ISO designation and robust mounting geometry simplify inventory and procurement. Choose Teknik Makina’s Turning Holder for dependable clamping of DCMT inserts — for expert advice or technical clarification contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications for reliable clamping Bezeichnung: Turning Holder Brand: Teknik Makina SKU: D252TM For Indexable Inserts: DCMT 11T3 Compatible Inserts: DCMT 11T3 Overall Length: 150 mm Weight: 0.738 kg ISO Designation: SDHCR 2525 Secondary Designation: M11 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Direction: Right Cutting Angle: 107.5° GTIN: 4061905153495 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts does the Turning Holder from Teknik Makina accept? The Teknik Makina Turning Holder is designed to accept DCMT 11T3 indexable inserts, ensuring a secure fit and correct cutting geometry for standard turning operations. Is the Turning Holder SDHCR 2525 suitable for right-hand turning only? Yes, the Teknik Makina Turning Holder SDHCR 2525 shown here is specified for right-hand cutting, which aligns with common turning setups that require that orientation. Can the Turning Holder be used in compact toolposts and confined spaces? The compact dimensions and 32 mm cutting head width of the Teknik Makina Turning Holder make it well suited for installations where accessibility and rigidity are both required. Who can I contact for technical questions about the Turning Holder? For technical questions about the Teknik Makina Turning Holder, METAV Werkzeuge offers expert advice — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 150mm SDHC Turning Holder for DCMT 11T3 Indexable Inserts, SDHCR 2525, 107.5° - Teknik Makina

Take advantage of precise clamping, a 25 mm cutting height and compatibility with DCMT 11T3 indexable inserts to ensure consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for application guidance. SDHCL 2525 Clamping Holder (SDHC) – 25 mm cutting height, 150 mm overall length | Teknik Makina A robust SDHCL 2525 clamping holder engineered for left‑hand turning applications, designed to accept DCMT 11T3 indexable inserts and to provide secure, repeatable clamping in production environments Compatible with DCMT 11T3 inserts 25 mm cutting height for robust cuts 150 mm overall length for deep reach Left‑hand cutting direction, ISO SDHCL 2525 Reliable clamping and consistent tool performance The clamping system is built to deliver secure clamping and repeatable geometry across shift cycles. With a 25 mm cutting height and a plunge‑resistant clamping arrangement, the holder stabilises the insert during interrupted cuts and heavier feed rates. The specified 107.5° cutting angle is incorporated to balance cutting forces and chip flow, which reduces chatter and preserves tool life. These measurable design choices are intended to support efficient production and consistent component tolerances. Reach and rigidity for demanding turning tasks A 150 mm overall length combined with a 32 mm head width provides extended reach while maintaining rigidity for longer overhangs. The moderate mass of 0.738 kg contributes to vibration dampening without adding unnecessary inertia, and the left‑hand orientation is suited for machines or setups that require inverse cutting direction. Terms such as left‑hand cutting are standardised in workshop planning: left‑hand denotes the feed and orientation used during turning operations, not tool handedness alone. Standard interfaces and fast setup for production use ISO designation SDHCL 2525 identifies the clamping geometry and ensures compatibility with industry tooling systems. The holder accepts a clamping screw with an M11 interface, enabling straightforward replacement and torque control during maintenance. By using established indexable inserts such as DCMT 11T3, setup times are reduced and insert stocking is simplified, which supports predictable changeovers and sustained throughput on the shop floor. Contact Metav Werkzeuge for application advice and to order the SDHCL 2525 clamping holder from Teknik Cutting Tools — expert guidance is available by phone or email to confirm machine compatibility and insert selection Technical Data Article number: D352TM Manufacturer: Teknik Makina ISO designation: SDHCL 2525 Suitable for inserts: DCMT 11T3 Facts Cutting height: 25 mm Head width: 32 mm Holder width: 25 mm Overall length: 150 mm Cutting angle: 107.5° Weight: 0.738 kg Clamping screw: M11 Cutting direction: left Special features SDHC clamping type for indexable inserts Compatible with DCMT 11T3 indexable inserts ISO standardised holder geometry Designed for left‑hand turning operations FAQ Which inserts are compatible with this holder? The SDHCL 2525 clamping holder is compatible with DCMT 11T3 indexable inserts; the combination (Teknik Makina, SKU D352TM) is specified for this insert size and form. Is the holder suitable for left‑hand turning only? Yes, the unit is configured for left‑hand cutting direction, making it appropriate for operations and machines that require inverse feed orientation. What are the key dimensions to check for machine setup? Key dimensions are 25 mm cutting height, 150 mm overall length and 32 mm head width, which should be verified against toolpost clearance and turret capacity before fitting the holder. What clamping interface is used for the insert screw? The holder uses an M11 clamping screw interface to secure the insert, supporting standard torque settings and straightforward servicing. How does the design support stable turning with longer overhangs? With its 150 mm overall length and 0.738 kg mass, the holder balances reach and rigidity to reduce vibration during extended overhang operations, improving surface finish and repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of robust clamping, internal coolant and a compact 25 × 25 mm shank for secure left‑hand turning in medium‑duty CNC operations; order directly via Metav Werkzeuge or consult our specialists for application advice. SDJCL 2525 clamping toolholder — SDJC for DCMT indexable inserts, left‑hand, internal coolant — Teknik Makina The SDJCL 2525 is a left‑hand turning toolholder designed for DCMT 11T3 indexable inserts, engineered to provide stable clamping and targeted coolant delivery for improved insert life in metalcutting operations. Left‑hand orientation for turning operations Internal coolant channel for improved cooling Compatible with DCMT 11T3 indexable inserts 25 × 25 mm shank, 150 mm overall length Consistent clamping for repeatable turning accuracy The holder is built around a compact 25 × 25 mm shank and a defined 93° cutting angle, providing a stable interface for turning tasks where repeatability matters. The clamping geometry secures DCMT style inserts and reduces micro‑movement at the cutting edge, which translates into consistent surface finish and predictable tool life. With a 32 mm cutting head width and a 35 mm cutting height, the component is suitable for routine external turning and facing tasks on conventional and CNC lathes. The robust design and measured mass (approx. 0.735 kg) help dampen vibration for smoother cuts. Targeted cooling and improved insert longevity This toolholder features an internal coolant passage that directs cutting fluid toward the insert seat and cutting zone, helping to reduce thermal load and minimise built‑up edge. Direct coolant improves chip control and often extends the service intervals for carbide inserts, which makes the solution economically attractive when productivity and uptime are priorities. The combination of internal coolant and the SDJC clamping concept supports reliable cutting performance, especially in interrupted cuts and heavy‑duty passes with DCMT 11T3 inserts. Straightforward installation and workshop compatibility Designed to ISO style SDJCL 2525 dimensions, the toolholder integrates smoothly into standard toolposts and turret systems. Fixing is managed with a Torx T15 drive and M3.5×11 Torx screw for secure insert retention; the holder accepts M11 mounting on compatible boring bars and pairs with the TA030 clamping plate where required. The overall 150 mm length keeps reach compact while enabling access to typical workpiece geometries. The straightforward mounting and standardised interfaces make this holder a practical choice for workshops and subcontractors aiming to rationalise their tooling setup. Purpose and ideal applications Engineered for left‑hand external turning with DCMT 11T3 inserts, this holder is most useful in small to medium‑batch production where stability and predictable tool life are required. It suits steel and alloy turning in industrial and precision workshops, and is a reliable option for lathe operations that benefit from directed coolant and a compact, rigid shank. The straightforward mechanical concept reduces setup time and supports reproducible process parameters during component runs. For procurement or technical advice on the SDJCL 2525 clamping toolholder from Teknik Makina, contact Metav Werkzeuge for tailored recommendations and delivery from our Emmerich distribution centre; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: AP517TM Manufacturer: Teknik Makina (Teknik Cutting Tools) Product designation: SDJCL 2525 / SDJC for DCMT inserts SKU: AP517TM Weight: 0.735 kg Data Shank dimensions: 25 × 25 mm Cutting head width: 32 mm Cutting height: 35 mm Overall length: 150 mm Cutting angle: 93° Direction: Left‑hand Special features Internal coolant: yes Suitable for: DCMT 11T3 indexable inserts Clamping plate: TA030 Torx key: T15 Torx screw: M3.5×11 Boring bar interface: M11 FAQ What insert type fits this holder? The holder is designed specifically for DCMT 11T3 indexable inserts and secures them with the SDJC clamping arrangement. Is the coolant internal or external? This toolholder features internal coolant, delivering cutting fluid directly to the insert seat and cutting edge to assist cooling and chip control. Which orientation is the holder for? The SDJCL 2525 is configured for left‑hand turning operations and is suitable for external turning and facing tasks. What are the key mounting features? Mounting uses a Torx T15 drive with an M3.5×11 screw; the holder is compatible with M11 boring bar interfaces and the TA030 clamping plate. Can this holder be used on CNC lathes? Yes — the compact 25 × 25 mm shank and standardised ISO dimensions make it suitable for turret and toolpost mounting on CNC turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise clamping, compact design and compatibility with common indexable inserts for reliable turning operations; order via Metav Werkzeuge or request technical advice for application-specific configuration. SDNCN 2525 clamping holder – compact turning toolholder for DC-- 11T3 indexable inserts by Teknik Makina A robust SDNCN 2525 clamping holder engineered for general turning tasks on lathes and turning centres, designed to accept DC-- 11T3 indexable inserts and to deliver stable cutting conditions in confined tool setups. SDNCN 2525 clamping holder for DC-- 11T3 inserts Overall length 150 mm for compact turning setups Clamping head width 12.5 mm for precise tool access 62.5° cutting angle for controlled chip formation Stable clamping for consistent turning results The holder provides a secure clamping interface that reduces vibration and minimises chatter, resulting in improved surface finish and repeatable part quality. With a cutting angle of 62.5°, the geometry supports controlled chip flow and lowers cutting forces in many finishing and semi-finishing operations. The result is fewer rejects and less rework, which directly benefits production efficiency and throughput. Compact form for confined toolroom set-ups With an overall length of 150 mm and a holder width and height of 25 mm, this toolholder fits tight turret pockets and short overhangs without sacrificing rigidity. The compact dimensions allow closer tool spacing on multi-station turrets and reduce bending moments during cut, helping to maintain tolerance stability across small-batch and series production. The modest mass of 0.705 kg keeps rotational imbalance low while offering robust support for typical turning duties. Fast insert changes and machining flexibility This toolholder is specified for DC-- 11T3 indexable inserts, enabling economical insert changes instead of full tool replacements. Indexable inserts provide consistent cutting edges and predictable wear intervals; swapping a worn insert restores performance in seconds. The clamping arrangement corresponds to a clamping screw thread M11, facilitating secure fixation and simple maintenance routines for workshop staff. Built for dependable workshop productivity Produced under the Teknik Makina designation and carrying the SDNCN 2525 ISO form factor, the holder is intended to integrate seamlessly into standard turning workflows. The combination of compact geometry, reliable clamping and insert compatibility makes it a pragmatic choice for industrial and trade workshops seeking a balance between flexibility and process stability. Supplied through Metav Werkzeuge, the product benefits from centralised distribution and a quality-assurance filter for European customers. For reliable turning performance with Teknik Makina toolholders, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D124TM Product designation: SDNCN 2525 clamping holder Compatible inserts: DC-- 11T3 SKU: D124TM Core data Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 12.5 mm Cutting angle: 62.5° Weight: 0.705 kg Design & features ISO designation: SDNCN 2525 Clamping screw thread: M11 For indexable inserts: DC-- 11T3 Suited to lathe and turning-centre applications FAQ Which inserts are compatible with this holder? The SDNCN 2525 clamping holder is designed for DC-- 11T3 indexable inserts; Teknik Makina specifies this insert form for correct seating and chip control. What machines is this toolholder suitable for? This toolholder is suitable for lathes and turning centres where a compact 150 mm overall length and low overhang are required; the SDNCN 2525 form factor fits common turret pockets. How is the insert secured in the holder? Insert fixation is achieved via the clamping arrangement compatible with an M11 clamping screw, providing secure retention and straightforward insert changes. Can this holder be used for finishing operations? Yes, the 62.5° cutting angle and stable clamping make the holder appropriate for finishing and light-to-medium turning where controlled chip formation and surface quality are priorities. What are the key dimensions to verify before purchase? Key dimensions to check are overall length 150 mm, holder width 25 mm, holder height 25 mm, and cutting head width 12.5 mm; these determine fitment in the turret and clearance for neighbouring tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a rigid 25 mm shank and compatibility with ADKT 1505 indexable inserts, this milling tool delivers stable cutting and quick insert changes for continuous production. Benefit from precise tool clamping, straightforward maintenance and expert advice — order the milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft-mounted milling cutter S312TM — 25 mm shank, for ADKT 1505 indexable inserts (Teknik Makina) The Shaft-mounted milling cutter S312TM is designed for shank-mounted milling operations using ADKT 1505 indexable inserts, offering a compact 150 mm overall length for versatile workshop use. 25 mm shank diameter for stable clamping Compatible with ADKT 1505 indexable inserts Two cutting edges for efficient material removal Supplied with M4x10 Torx screw and T15 key Stable shank design for precise machining The solid 25 mm shank and compact 150 mm overall length combine to reduce run-out and vibration during milling, which directly improves surface finish and dimensional consistency. A balanced configuration with two cutting edges ensures symmetric cutting forces, reducing chatter on standard toolholders and supporting consistent cycle times. The modest mass of 0.55 kg contributes to easier handling and rapid tool changes without compromising rigidity. Machine shops seeking repeatable results will value the combination of stable clamping and a short overhang for close-tolerance milling. Reliable insert system reduces downtime Designed for ADKT 1505 indexable inserts, the tool accepts widely available carbide inserts for fast replacement and predictable cutting performance. The insert pocket and secure fastening with the supplied M4x10 Torx screw (Torx key T15) make replacement straightforward and minimise downtime. Using established insert geometries means stocks of cutting grades from preferred manufacturers such as ISCAR can be used, so tooling inventory is easier to manage. The result is a pragmatic solution that supports steady production and simpler maintenance cycles. Easy maintenance and seamless workshop integration The straightforward construction and standard fastening hardware allow quick on-bench service and reduce the need for specialised tooling. Compatibility with common indexable inserts and a standard shank format simplifies integration into existing tool sets and reduces the number of adapters required. Focusing on functional reliability rather than cosmetic extras, this cutter is a practical component for mixed-production environments where changeover speed and predictable performance matter most. For dependable milling performance with a 25 mm shank, contact Metav Werkzeuge for personalised technical advice on the S312TM cutter from Teknik Makina — call +49 2822 7131930 or email info@metav-werkzeuge.com for further information and procurement support. Technical data SKU: S312TM Manufacturer: Teknik Makina Facts Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Weight: 0.55 kg Diameter: 25 mm Cutting edges: 2 Special features Compatible with ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 included Torx key T15 included FAQ Which insert type is required for this cutter? The S312TM shaft-mounted milling cutter uses ADKT 1505 indexable inserts; compatible grades from ISCAR or other suppliers can be fitted. How is the insert secured to the cutter? Inserts for the S312TM are clamped with the supplied M4x10 Torx screw, tightened using the T15 key for secure seating. What are the shank and overall dimensions? This cutter features a 25 mm shank, a cutting length of 60 mm and an overall length of 150 mm. How many cutting edges does the tool have? The S312TM is supplied with two cutting edges, offering balanced cutting forces and efficient material removal. Is the tool compatible with inserts from major manufacturers? Yes, the cutter accepts ADKT 1505 inserts and is compatible with widely used insert suppliers such as ISCAR, facilitating stock commonality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, simple insert change-out and precise geometry to maintain steady milling productivity; order the tool via Metav Werkzeuge or consult our specialists for application advice. S314TM shaft cutter by Teknik Makina – 30 mm diameter, for ADKT 1505 indexable inserts The S314TM shaft cutter is a purpose-built indexable-insert milling tool for productive CNC machining, designed to accept ADKT 1505 inserts and to deliver stable cutting performance in repeated operations 30 mm cutting diameter for stable milling Compatible with ADKT 1505 indexable inserts 25 mm shank diameter for secure clamping Three cutting edges for efficient material removal Predictable metal removal with compact, rigid design The S314TM is engineered to provide consistent cutting through a combination of a 30 mm nominal diameter and a 25 mm shank, yielding higher stiffness at the toolholder interface and reduced vibration during engagement. With a 50 mm cutting length and a 150 mm overall length, the cutter offers a balance between reach and rigidity that suits both short-stepped finishing and deeper shoulder milling operations. The three-flute layout improves radial balance and ensures steady chip load per tooth, which in turn supports stable cycle times and repeatable component quality across production batches. Fast indexable-insert handling for minimal downtime Tool change and maintenance have been simplified by the standardised clamping design: the indexable inserts are secured with an M4x10 Torx screw and adjusted using a T15 key, enabling quick insert replacement and reliable seat contact every time. Compatibility with ADKT 1505 grade plates—commonly supplied by manufacturers such as ISCAR—means spare parts are widely available and changeovers are straightforward. This reduces unproductive machine idle time, allowing production planners to maintain throughput without complex tool regrinds or reconditioning. Suited to productive CNC milling operations The cutter’s geometry, incorporating three cutting edges, supports efficient chip evacuation and balanced cutting forces, which contributes to a predictable surface finish and longer insert life when parameters are set correctly. The bodied construction and measured mass (approx. 0.596 kg) give a favourable dynamic response in typical milling spindles, while the indexable-insert system keeps per-edge costs low and consistent. For job shops and in-house production lines seeking to streamline tooling logistics, this design offers a pragmatic blend of performance, serviceability and inventory friendliness. Contact Metav Werkzeuge for availability of the Teknik Makina S314TM shaft cutter and tailored procurement advice from our Emmerich team Technical data Article number: S314TM Manufacturer: Teknik Makina Product type: Shaft cutter for indexable inserts Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 Facts Diameter: 30 mm Cutting edges: 3 Shank diameter: 25 mm Cutting length: 50 mm Overall length: 150 mm Weight: 0.596 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts M4x10 Torx clamping screw T15 Torx key interface SKU S314TM Brand: Teknik Makina FAQ Which inserts fit this cutter? The cutter accepts ADKT 1505 indexable inserts; compatible grades from established suppliers such as ISCAR are commonly used with the S314TM. How are the inserts secured and serviced? Inserts are clamped with an M4x10 Torx screw and can be tightened or released with a T15 key for rapid change-out and straightforward maintenance of the S314TM shaft cutter. What cutting profile and edge count does the tool offer? The tool is supplied with a 30 mm diameter and three cutting edges, optimised for balanced cutting forces and effective chip removal in indexable-insert milling. Is the cutter suitable for CNC production runs? Yes, the combination of a stiff 25 mm shank, standardised inserts and simple clamping makes the cutter well suited to repetitive CNC milling operations where quick insert changes and predictable performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of proven rigidity and precise indexable-insert compatibility: the robust 32 mm shank and three cutting edges deliver stable cutting performance and consistent surface finish. Choose direct procurement through Metav Werkzeuge or consult the technical advisers for application support. S316TM Shank Cutter for ADKT 1505 Indexable Inserts — 35 mm cutting diameter, 32 mm shank The S316TM is a shank cutter engineered for industrial milling tasks with ADKT 1505 indexable inserts, offering a compact overall length for straightforward integration into production toolsets 35 mm cutting diameter 32 mm hardened shank for rigidity Compatible with ADKT 1505 inserts (ISCAR) Includes M4x10 Torx clamp screw, T15 key Greater stiffness for repeatable machining results With a 32 mm shank and a solid build weighing 0.92 kg, this cutter is designed to reduce chatter and improve stability in interrupted and continuous cuts. The presence of three cutting edges contributes to balanced cutting forces, which helps to achieve a more consistent surface finish and longer insert life. For operations where dimensional repeatability matters, the design reduces the need for rework and supports higher process reliability. Fast indexable-insert changes minimise downtime Compatibility with ADKT 1505 indexable inserts — including variants from ISCAR — allows quick tool servicing and straightforward spare-part management. The clamping system uses an M4x10 Torx screw and a T15 key for secure, repeatable fixation of the insert, enabling rapid changes without specialised fixtures. This combination lowers setup times and simplifies tool handling in busy workshop environments. Compact geometry for versatile milling tasks A 35 mm cutting diameter, 50 mm cutting length and a total length of 150 mm make this cutter suitable for both face and light peripheral milling in confined tool envelopes. The cutter’s proportions provide a compromise between reach and rigidity, making it appropriate for finishing and semi‑finishing operations where access and stability are both required. The specification supports a broad range of production tasks without overcomplicating tool inventory. Built for efficient workshop operation The tool’s straightforward specification supports efficient stockkeeping and predictable performance on the shop floor. As a tool designed for indexable inserts, it reduces consumable waste compared with solid tools and allows rapid recovery from wear by replacing only the inserts. Application advice and machining recommendations are available to assist selection and integration into existing toolholders and machine setups. Choose the Teknik Makina S316TM for stable, high‑precision milling with ADKT 1505 inserts — contact Metav Werkzeuge in Emmerich for tailored procurement and technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S316TM Manufacturer: Teknik Makina Suitable for inserts: ADKT 1505 Compatible insert maker: ISCAR Torx screw: M4x10 Torx key: T15 Facts Shank diameter: 32 mm Cutting diameter: 35 mm Cutting length: 50 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.92 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts M4x10 Torx clamp screw included T15 Torx key included SKU: S316TM FAQ Which inserts are compatible with this cutter? The cutter is designed for ADKT 1505 indexable inserts; variants from ISCAR are compatible and commonly used with this tool. What are the main dimensions to check for machine integration? Key dimensions are a 35 mm cutting diameter, 50 mm cutting length, 32 mm shank diameter and a 150 mm overall length. Is the clamp screw supplied with the cutter? Yes, the cutter comes with an M4x10 Torx clamp screw and the matching T15 key for insert securement. What milling tasks suit this cutter best? The tool is suitable for face and light peripheral milling where a compact overall length and good stability are required. How much does the cutter weigh and why does that matter? The cutter weighs 0.92 kg; the mass contributes to cutting stability and helps to dampen vibration during operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, high-stability milling solution: the robust 25 mm shank and generous 60 mm cutting length combine to deliver steady chip evacuation and longer engagement per tool change. Compatibility with APKT 1705 indexable inserts keeps tooling costs predictable and replacement rapid via Metav Werkzeuge. Shaft cutter for APKT 1705 indexable inserts — 25 mm shank, 60 mm cutting length (Teknik Cutting Tools) A shaft cutter designed for grooved and face milling operations, optimised for use with APKT 1705 indexable inserts and suited to production environments requiring stable clamping and repeatable geometry. 25 mm shank for solid toolholders 60 mm cutting length for deep engagements Compatible with APKT 1705 inserts (Taegutec) Secure Torx M4x10 fixing, key T15 Consistent cutting performance for reliable production A stable toolholder is the foundation of predictable machining. The combination of a 25 mm shank and balanced mass provides reduced runout and improved rigidity, which translates directly into consistent finish and tool life. The cutter is configured with two cutting edges, enabling steady material removal while limiting vibration. The clamping interface is secured by an M4x10 Torx screw tightened with a T15 key, ensuring the insert pocket maintains alignment across repeated indexings. This mechanical certainty reduces scrap rates and supports lean production processes by keeping process variability low. Compatibility that reduces downtime and simplifies logistics The tool is engineered specifically for APKT 1705 indexable inserts from Taegutec, allowing rapid insert exchange without special adapters. Using a standard insert family means fewer stock items and faster turnaround when replacing worn edges, which improves overall equipment effectiveness. The shaft cutter’s design permits straightforward insert seating and a compact cutting head geometry that helps to maintain chip flow during longer engagements. For workshops consolidating tooling ranges, this configuration helps to standardise consumables and simplifies purchasing and storage logistics. Durable handling and predictable integration into production lines At an overall length of 150 mm and a weight of 0.534 kg, the cutter balances accessibility in tight set-ups with sufficient overhang for deeper cuts while keeping deflection low. The 60 mm cutting length offers extended engagement for profiling and shoulder milling, while the solid shank design supports steady clamping in standard toolholders. Sourced from Teknik Cutting Tools and distributed through Metav Werkzeuge, the component benefits from a pragmatic supply chain: stocked and quality-filtered in Emmerich for dependable delivery to European workshops. That supply reliability, combined with straightforward maintenance, supports sustained uptime and long-term process planning. For application advice or to reserve the Teknik Cutting Tools S660TM with its 25 mm shank and 60 mm cutting length, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert support Technical data Article number: S660TM Manufacturer: Teknik Makina Compatible inserts: APKT 1705 (Taegutec) Facts Shank diameter: 25 mm Cutting length: 60 mm Cutting edges: 2 Overall length: 150 mm Weight: 0.534 kg Special features Torx screw: M4x10 Torx key: T15 Compatibility: for APKT 1705 indexable inserts Manufacturer series: Teknik Cutting Tools FAQ Which indexable inserts fit this cutter? The cutter accepts APKT 1705 indexable inserts; compatibility is specified for the Taegutec variant and identical APKT 1705 formats. How is the insert secured in the cutter? Insert clamping is achieved with an M4x10 Torx screw; a T15 key is used for tightening and repeatable clamping torque. What is the shank diameter and why does it matter? The 25 mm shank provides enhanced rigidity compared with smaller diameters, reducing deflection and improving surface finish during prolonged engagements. How long is the effective cutting length? The tool offers a 60 mm cutting length, suitable for deeper facing and profiling operations while maintaining process stability. What is the article number for ordering or reference? Reference the SKU S660TM when enquiring or ordering; the component is supplied by Teknik Cutting Tools and distributed via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high clamping rigidity, long cutting reach and simple insert handling for steady production performance; order the S180TM directly via Metav Werkzeuge or ask our consultants for tailored advice. S180TM Shank Milling Cutter — 25 mm shank, 60 mm cutting length A robust S180TM Shank Milling Cutter for versatile indexable-insert milling with APXT 1003 inserts, engineered for secure clamping and efficient shoulder work Shank Ø 25 mm for secure clamping 60 mm cutting length for deeper passes Compatible with APXT 1003 indexable inserts Torx M2.5×5.5 screw and T8 key included Consistent rigidity for repeatable cuts The tool's 25 mm shank and well balanced 150 mm overall length produce reliable clamping stability, which reduces chatter and maintains dimensional accuracy during longer cuts. With a 90° cutting angle, the geometry is tailored to shoulder and face milling operations that demand sharp 90-degree shoulders. The increased rigidity directly improves process reliability, meaning fewer part rejects and less time lost to rework — a measurable benefit for batch production and industrial environments. Extended reach that expands capability Featuring a 60 mm cutting length, this cutter allows deeper engagement without immediate overhang compromise. The longer cutting reach can reduce the need for multiple setups when profiling deeper features, thereby shortening cycle times. Combined with three precision edges, the design supports steady material removal rates while preserving tool life, a rational advantage for shops aiming to increase throughput with minimal fixture changes. Fast insert changes and secure fastening Designed for APXT 1003 indexable inserts and compatible with Korloy variants, the system simplifies insert replacement. The supplied Torx M2.5×5.5 screw and T8 key provide secure clamping of the insert pocket, allowing quick, repeatable tool service without special adapters. Faster changeovers translate into less machine downtime and improved overall equipment effectiveness (OEE), a practical gain for production-focused workshops. Practical fit for everyday machining tasks This cutter's three cutting edges and a compact mass of 0.563 kg contribute to predictable dynamic behaviour in milling spindles. Suitable for general-purpose milling tasks where a sturdy interface and standardised inserts are preferred, the tool supports familiar workflows and reduces the need for bespoke tooling. The combination of tried-and-tested insert standards and a straightforward shank design makes it a pragmatic choice for both maintenance shops and production lines. For high-rigidity, insert-based milling from Teknik Makina, contact Metav Werkzeuge to discuss the S180TM and secure tailored advice or ordering support from our specialists at Metav Werkzeuge. Technical data Article number: S180TM Manufacturer: Teknik Cutting Tools Facts Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.563 kg Cutting angle: 90° Torx screw: M2.5×5.5 Torx key: T8 Special features For APXT 1003 indexable inserts Compatible with Korloy insert variants Designed for secure clamping stability Three cutting edges for balanced wear FAQ Which inserts fit this cutter? The S180TM is designed for APXT 1003 indexable inserts and is compatible with Korloy-manufactured variants that follow the same APXT 1003 specification. What are the critical dimensions to check for machine compatibility? Check the 25 mm shank diameter and the 150 mm overall length of the S180TM; these determine whether the cutter fits the spindle and provides the required reach for the application. Is a fastening tool supplied with the cutter? Yes. The S180TM is supplied with a Torx M2.5×5.5 screw and a T8 key for secure insert clamping and straightforward insert changes. How many cutting edges does the tool have and why does that matter? The cutter has three cutting edges, which helps distribute wear and provides a balance between cutting stability and efficient material removal for general milling tasks. What kind of milling operations suit this tool best? With a 90° cutting angle and a long cutting length, the tool is well suited to shoulder and face milling where square shoulders and deeper passes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com