Gibt es einen Hahn und Kolb Online Shop?

Benefit from a precise, shank-mounted milling solution with a 16 mm shank and 50 mm cutting length, designed for reliable indexable insert machining with AXMT 0602 and APKT 0903 inserts; order the S020TM directly via Metav Werkzeuge or ask our consultants for tailored tooling support. Shank-mounted milling cutter S020TM — 16 mm shank, for AXMT 0602 and APKT 0903 inserts by Teknik Makina A sturdy Shank-mounted milling cutter S020TM engineered for indexable insert milling in general machining and production settings, compatible with AXMT 0602 and APKT 0903 insert families. 16 mm shank diameter 50 mm cutting length Compatible with APKT 0903 inserts Torx screw M2.5×5.5 fastening Consistent machining performance for repeatable production The S020TM delivers stable cutting through its two-cut geometry and precisely defined shank form. The two cutting edges reduce vibration and allow for predictable chip formation, which improves surface finish and extends insert life. In practice this means fewer tool changes and a more consistent cycle time on batch runs; the reduced variation supports quality control in both small-series and larger production environments. Compatibility and ease of maintenance to reduce downtime Designed for use with standard indexable inserts, the cutter accepts AXMT 0602 and APKT 0903 insert types and is compatible with inserts from Taegutec, enabling flexible selection of grades for different materials. Fastening is by a M2.5×5.5 Torx screw, operated with a T8 key, so insert replacement is straightforward and requires only common workshop tools. The clear, standardised fixing reduces maintenance time and keeps the tool in service for longer. Practical dimensions and workshop integration With a 16 mm shank diameter, 50 mm of cutting length and an overall length of 150 mm, the tool integrates easily into compact toolholders while providing sufficient reach for many slotting and shoulder-milling operations. The modest mass of 0.233 kg supports high-speed rotation without excessive imbalance when clamped correctly. These dimensions make the tool suitable for production benches where tool rigidity and accessibility are priorities. Why this cutter benefits production workflows By combining established insert systems with a robust shank design, the S020TM supports economical machining: predictable insert wear, straightforward insert sourcing, and rapid replacement. The design emphasises efficiency and process stability, helping to shorten setup time and reduce machining variability — factors that translate directly into improved output quality and lower per-part costs over time. For reliable, indexable-insert milling select the Teknik Makina S020TM with its 16 mm shank and 50 mm cutting length — contact Metav Werkzeuge for ordering or expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S020TM Manufacturer: Teknik Makina Facts Shank diameter: 16 mm Cutting length: 50 mm Overall length: 150 mm Diameter: 16 mm Number of cutting edges: 2 Weight: 0.233 kg Special features Compatible inserts: AXMT 0602, APKT 0903 Compatible insert manufacturer: Taegutec Torx screw: M2.5×5.5 Torx key size: T8 Intended for indexable insert milling FAQ Which insert types fit this milling cutter? The S020TM accepts AXMT 0602 and APKT 0903 indexable inserts; Taegutec grades are indicated as compatible for varied workpiece materials. What is the shank size and overall length? Shank diameter is 16 mm and the overall length is 150 mm for the S020TM, making it suitable for standard 16 mm toolholders and many fixture arrangements. How many cutting edges does the tool have and what is the benefit? The tool features two cutting edges; this geometry enhances stability and chip control, improving surface finish and consistent insert wear. Which fastening hardware is used for inserts? Inserts are secured with a Torx screw in size M2.5×5.5, tightened using a T8 key for quick and reliable insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of internal coolant, a 17 mm shank and a 40 mm cutting length for reliable milling and improved tool life; precise clamping and straightforward insert replacement keep production running smoothly. Order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Shank cutter S478-1TM – for BLMP 0603 indexable inserts, 17 mm shank, internal coolant (Teknik Makina) The Shank cutter S478-1TM is a shank-mounted indexable insert cutter engineered for use with BLMP 0603 inserts, offering coolant-through delivery for improved chip evacuation and consistent machining performance. 17 mm shank diameter Coolant-through design Compatible with Taegutec BLMP 0603 inserts 150 mm overall length Improved tool life and process reliability through coolant-through delivery The built-in internal coolant channel directs coolant straight to the cutting zone, reducing heat at the insert edge and aiding chip control. This results in longer insert life and more consistent surface finish, especially in medium to heavy milling operations. The coolant-through concept also lowers the risk of built-up edge and makes evacuation more effective where chip pockets can otherwise hinder performance. For workshops seeking stable cycle times, the coolant provision is a clear operational advantage. Stable clamping and accurate cutting for repeatable results With a 17 mm shank and a 16 mm shaft diameter, the tool provides secure clamping and high torsional rigidity. The 40 mm cutting length balances reach and stiffness, while the two cutting edges support efficient material removal with predictable chip loads. These dimensional choices reduce vibration and contribute to repeatable tolerances across series production. Where programme reliability and toolholder stability are priorities, this configuration helps maintain process control. Compatibility and service-friendly design for quick maintenance Designed for the BLMP 0603 indexable insert family and compatible with Taegutec insert geometries, the cutter simplifies tooling logistics when that insert system is already standard in the shop. Insert retention uses an M3x6.2 Torx screw tightened with a T8 Torx key, enabling rapid insert changes and secure seating. The combination of standard insert format and familiar fastening reduces downtime during servicing and makes replacement straightforward for trained staff. Choose the Teknik Makina shank cutter with coolant-through delivery from Metav Werkzeuge for dependable supply and practical technical guidance—contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for precise application support and fast delivery. Technical data SKU: S478-1TM Manufacturer: Teknik Makina Product type: Shank cutter Designation: for BLMP 0603 indexable inserts Core data Diameter: 17 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length: 40 mm Weight: 0.244 kg Cutting edges: 2 Torx screw: M3x6.2 Torx key: T8 Special features Internal coolant (coolant-through) For BLMP 0603 indexable inserts Compatible with Taegutec insert geometry FAQ Is this cutter compatible with BLMP 0603 inserts? Yes. The shank cutter S478-1TM is designed for BLMP 0603 indexable inserts and matches the insert seat geometry. How does the internal coolant affect machining? Internal coolant supplies coolant directly to the cutting edge, improving chip evacuation, reducing temperature at the cutting zone, and extending insert life for the S478-1TM. Which tool is required to change the inserts? Insert retention on the S478-1TM uses an M3x6.2 Torx screw; a T8 Torx key is used for tightening and loosening. What are the key dimensions for clamping and reach? Key dimensions are a 17 mm cutter diameter, a 16 mm shank diameter and a 150 mm overall length with a 40 mm cutting length. What is the SKU for ordering or reference? The product is listed as SKU S478-1TM from Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable milling solution that combines a 20 mm shank, 40 mm cutting length and secure Torx fastening for reliable indexable-insert performance; order the cutter directly via Metav Werkzeuge or request advice from our consultants. Shaft milling cutter S481TM by Teknik Makina — compatible with BLMP 0603 indexable inserts, 20 mm shank, 3 cutting edges Shaft milling cutter S481TM designed for indexable-insert milling applications; suited to production environments where quick insert changes and consistent cutting geometry are required 20 mm shank diameter 40 mm cutting length Compatible with BLMP 0603 inserts Torx M3x6,5 fastening Reliable indexable-insert performance for small-format milling The design focuses on consistent cutting results by using standard indexable geometry. With BLMP 0603 compatibility and 3 cutting edges, the tool enables repeatable insert indexing and predictable wear patterns. This reduces set-up time and simplifies inventory management because the insert size and form are widely available. The tool body supports secure insert clamping, which preserves cutting geometry during interrupted cuts and reduces vibration-related deviations. Rigidity and repeatability from a compact shank design A 20 mm shank provides a balance between rigidity and accessibility for many milling setups. The combination of a substantial shank diameter and a moderate overall length (150 mm) reduces deflection during axial and radial loading, improving dimensional accuracy on each component. For process planners this means fewer rework cycles and better cycle-time reliability when the cutter is used in repetitive milling tasks on production equipment. Service-friendly fastening to speed insert replacement Maintenance is simplified by the secure Torx fastening: M3x6,5 screw with a T8 key interface. The fastening design permits quick insert changes while maintaining repeatable clamp force and seat alignment, so downtime for tool changes is minimised. Fewer handling steps also reduce the risk of incorrect seating; the clear mechanical interface supports safe, efficient shop-floor practice without the need for special tools beyond the supplied Torx size. Practical fit for industrial milling workflows This indexable-insert cutter fits into established tooling systems where BLMP 0603 inserts and Taegutec-compatible parts are used, enabling fast reconditioning of cutting edges without replacing the whole cutter body. The modest weight (0.335 kg) and defined cutting length help when planning tool offsets and fixture clearances, allowing machinists and process engineers to integrate the cutter into existing tool libraries with minimal adjustments. The straightforward geometry supports predictable tool life and easy documentation in tool management systems. For procurement or technical advice on the Teknik Makina shaft milling cutter S481TM, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: S481TM Manufacturer: Teknik Makina Facts Shank diameter: 20 mm Cutting length: 40 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.335 kg Special features For indexable inserts BLMP 0603 Compatible insert manufacturer: Taegutec Torx screw: M3x6,5 Torx key: T8 SKU: S481TM Brand: Teknik Makina FAQ What inserts does the cutter accept? The shaft milling cutter S481TM accepts BLMP 0603 indexable inserts and is specified as compatible with Taegutec insert versions. How is the insert secured on the cutter? Insert clamping is performed with a Torx screw (M3x6,5); the designated key size is T8 for repeatable fastening and straightforward replacement. What are the key dimensions to consider when fitting the tool? Important dimensions include the 20 mm shank diameter, 40 mm cutting length and overall length of 150 mm for planning tool offsets and fixture clearance when using the S481TM. Is this cutter suitable for high-volume production? The design of the S481TM supports quick insert changes and consistent clamping force, which helps maintain uptime and repeatability in production settings where BLMP 0603 inserts are standard. Which manufacturer produced this tool? The S481TM is produced by Teknik Makina and distributed via Metav Werkzeuge; the SKU is S481TM for ordering and inventory purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust 20 mm shank and compatibility with BOMT 1304 indexable inserts deliver stable, accurate milling; the two‑flute geometry and 40 mm cutting length enable efficient chip evacuation and reduced cycle times. Order the S851TM directly via Metav Werkzeuge or ask our consultants if needed. S851TM Shank Milling Cutter — 20 mm shank, for BOMT 1304 indexable inserts (Teknik Makina) The S851TM is a precision shank milling cutter engineered for industrial milling applications using BOMT 1304 indexable inserts; designed to combine secure clamping with efficient material removal in demanding production environments. 20 mm shank diameter for stable clamping Compatible with BOMT 1304 indexable inserts Two-flute design for efficient chip removal 150 mm overall length, 40 mm cutting length Heavy-duty clamping for consistent results A 20 mm shank delivers the stiffness required for repeatable machining, reducing runout and vibration during milling operations. The robust shank diameter contributes to stable clamping, which in turn improves the surface finish and extends insert life. For workshops that prioritise process reliability, the combination of dimensional stability and controlled tool weight supports consistent part quality across long production runs without frequent re‑adjustment. Faster machining through optimised cutting geometry With a two‑flute geometry and 40 mm cutting length, the tool is optimised for productive chip evacuation and sustained cutting performance. The reduced flute count enhances chip flow, which helps maintain cutting temperatures and avoids clogging in pockets or deep cuts. This geometry supports higher material removal rates where insert indexability and quick replacement minimise downtime and keep cycle times competitive. Simple insert fixation and low-maintenance operation Insert changes are fast and secure thanks to the M3.5x8.5 Torx screw with a T10 key interface, supplying a compact and reliable clamping solution. The cutter accepts BOMT 1304 type indexable inserts and is specified to work with Ingersoll‑type inserts, allowing familiar spare parts logistics for established setups. Less time spent on insert handling means more machine availability and predictable maintenance intervals. Designed for integration into production workflows At 150 mm overall length and a tool mass of 0.356 kg, the cutter balances reach and rigidity for a broad range of milling tasks. The design supports straight insertion into standard tool holders and straightforward handling on the shop floor. Clear technical matching with typical indexable insert systems reduces specification errors when integrating the tool into CAM lists or tooling inventories, making procurement and tool management more efficient. For application guidance or to secure supply of the Teknik Cutting Tools S851TM from Metav Werkzeuge — delivered from Emmerich with full product support — contact our sales team at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for the intended process. Technical data Article number: S851TM Manufacturer: Teknik Makina Name: Schaftfräser for BOMT 1304 Indexable Inserts Compatible inserts: BOMT 1304 Compatible insert manufacturer: Ingersoll Torx screw: M3,5x8,5 Torx key: T10 Facts Shank diameter: 20 mm Cutting length: 40 mm Overall length: 150 mm Flutes: 2 Diameter: 20 mm Weight: 0.356 kg Special features For BOMT 1304 indexable inserts Compatible with Ingersoll inserts M3.5x8.5 Torx screw, T10 key SKU: S851TM FAQ Which inserts are compatible with this cutter? The cutter accepts BOMT 1304 indexable inserts; it is specified as compatible with Ingersoll‑type inserts for the S851TM. What are the key dimensions of the tool? Key data for the S851TM: 20 mm shank diameter, 40 mm cutting length, 150 mm overall length, 2 flutes, weight 0.356 kg. How are inserts secured in the cutter? Inserts are clamped with an M3.5x8.5 Torx screw tightened using a T10 key for reliable fixation and quick replacement. Can the screw type be replaced with a different standard? The S851TM is specified for an M3.5x8.5 Torx screw; replacement with another standard is possible if the replacement matches the cutter pocket and torque specifications, but original Torx fasteners are recommended. Is the tool suitable for automated tool magazines? The tool’s dimensions and shank design are compatible with standard tool holders and automated magazines where a 20 mm shank is acceptable for the machine’s tooling system. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a 25 mm shank and compatibility with BOMT 1304 indexable inserts to achieve stable, flexible milling with a 40 mm effective cutting length; order the S853TM shank milling cutter directly via Metav Werkzeuge or ask the consultants for integration advice. S853TM shank milling cutter – 25 mm shank, for BOMT 1304 indexable inserts (Teknik Makina) A robust S853TM shank milling cutter engineered for indexable BOMT 1304 inserts, designed to deliver consistent material removal and reliable performance in industrial milling applications. Fits BOMT 1304 indexable inserts (Ingersoll compatible) 25 mm shank diameter for stable toolholding 40 mm effective cutting length for deeper passes Three cutting edges for balanced milling performance Consistent machining through a stable shank design The predominantly mechanical advantage of a 25 mm shank is increased torsional stiffness and reduced runout, which supports stable clamping and predictable tool life. With a balanced geometry and three cutting edges, the cutter reduces vibrations during high-speed rotation, translating into improved surface finish and reduced rework. For production environments where cycle times and reproducible tolerances matter, this shank arrangement ensures fewer scrap parts and more consistent throughput. Flexible insert system lowers tooling complexity Compatibility with BOMT 1304 indexable inserts and Ingersoll-compatible plates allows a single cutter body to cover a variety of cutting conditions without swapping complete tools. The 40 mm effective cutting length provides scope for deeper axial engagement, enabling longer cuts per pass and fewer repositionings. The indexable system also separates cutting geometry from the tool body: worn edges are replaced quickly, meaning downtime is reduced and spindle utilisation is increased — a clear efficiency gain for batch and job-shop operations. Quick serviceability and predictable integration Assembly and maintenance rely on standardised fastening: an M1.8x4 Torx screw secured with a T10 key delivers repeatable clamp force for each insert change. The 150 mm overall length and a measured weight of 0.556 kg simplify balance calculations for holders and spindles, while the clear numeric data supports process planning and fixture selection. The combination of straightforward insert replacement and established fastening technology keeps maintenance intervals short and integration into existing toolsets uncomplicated. For tailored application advice or to confirm compatibility with specific holders and machines, contact Metav Werkzeuge — our technical team can advise on integration of the Teknik Cutting Tools S853TM shank milling cutter and BOMT 1304 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements. Technical Data Article number: S853TM Manufacturer: Teknik Makina Product: Shank milling cutter for BOMT 1304 indexable inserts Core data Shank diameter: 25 mm Cutting length (shank): 40 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.556 kg Diameter: 25 mm Features Compatible with BOMT 1304 indexable inserts Torx screw: M1.8x4 Torx key size: T10 Compatible with Ingersoll inserts SKU: S853TM FAQ Which inserts fit this cutter? The S853TM is designed for BOMT 1304 indexable inserts and is compatible with Ingersoll-style plates for straightforward replacement. What shank diameter and overall length should be specified for holders? Shank diameter is 25 mm and overall length is 150 mm for the S853TM, suitable for many standard toolholders that accept a 25 mm shank. What fastening hardware secures the inserts? Insert clamping uses an M1.8x4 Torx screw tightened with a T10 key; this standard arrangement ensures repeatable clamp force for the S853TM. Can this cutter be used for deeper axial cuts? With a 40 mm effective cutting length and three cutting edges, the S853TM supports deeper passes while maintaining balanced cutting behaviour. What are the weight and balance considerations for spindle setup? Weight is 0.556 kg for the S853TM, a value useful for balancing and selecting compatible holders for stable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise insert compatibility and a rigid shank: the S107TM accepts ENMX 0604 indexable inserts, offers a shank Ø16 mm for secure clamping and a Ø17 mm cutter diameter for stable milling. Order the S107TM directly via Metav Werkzeuge or ask our consultants if needed. Schaftfräser – insert milling cutter for ENMX 0604, Ø17 mm, shank Ø16 mm (Teknik Makina) The Schaftfräser is a shank-mounted insert milling cutter designed for indexable milling with ENMX 0604 inserts, suitable for machine shops and production environments requiring quick insert changes and consistent cutting geometry Insert milling cutter for ENMX 0604 Shank Ø16 mm for secure clamping Cutter Ø17 mm, overall length 150 mm Fast insert change with Torx M2.5x7 Precise performance through insert compatibility and rigid shank The S107TM is engineered as an insert milling cutter that accepts ENMX 0604 indexable inserts, delivering reliable machining cycles with minimal downtime. The combination of a shank Ø16 mm and a Ø17 mm cutting head provides improved concentricity and lower runout compared with loose-fixture solutions, which translates into steadier feeds and a consistent surface finish. Because the cutter is designed for indexable inserts, the cost per cutting edge is reduced and changeover is rapid, enabling efficient batch production without sacrificing repeatability. Workshop-friendly handling and maintenance for smooth workflows Maintenance and insert replacement are straightforward: the cutter uses Torx M2.5x7 fastening screws accessed with a T8 key, allowing quick, repeatable clamping of ENMX 0604 inserts from common manufacturers such as YG-1. This practical design shortens tool change time and reduces the risk of incorrect torque or seating during service intervals. The modular nature of the tool body supports straightforward inventory management: keep a stock of inserts rather than multiple full cutters to lower holding costs and simplify replenishment. Application guidance and fitment details for reliable results This shank-mounted cutter is intended for general-purpose milling with indexable inserts sized ENMX 0604; it features two cutting edges that balance chip evacuation and engagement for many milling tasks. The overall length of 150 mm pairs well with medium-reach tooling setups while the shank Ø16 mm supports rigid clamping in standard collets or toolholders. For optimal outcomes, pair the S107TM with recommended inserts and machining parameters provided by the insert manufacturer to match material and surface finish targets. For dependable insert milling with Teknik Cutting Tools' design, contact Metav Werkzeuge in Emmerich to secure the S107TM and discuss suitable ENMX 0604 inserts at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S107TM Manufacturer: Teknik Makina For inserts: ENMX 0604 Compatible insert maker: YG-1 Torx screw: M2,5x7 Torx key: T8 Shank diameter: 16 mm Cutter diameter: 17 mm Overall length: 150 mm Cutting edges: 2 FAQ What insert type does this cutter use? The S107TM is made for ENMX 0604 indexable inserts and is specified for that insert geometry. Which screw and key are required to change inserts? Insert fastening on the S107TM is with Torx M2.5x7 screws and a T8 key for secure and repeatable clamping. Is the cutter compatible with inserts from YG-1? Yes, the S107TM is compatible with YG-1 inserts sized ENMX 0604, as listed in the technical details. What are the main dimensions to check for machine setup? Key dimensions for setup are shank diameter 16 mm, cutter diameter 17 mm, and overall length 150 mm; these determine holder fit and reach. How many cutting edges does the tool have and what does that mean for machining? The tool has two cutting edges, which offers a balance between chip load per tooth and surface finish suitable for many milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines secure Torx fastening with a stable triple-edge geometry for consistent results in series production. The cutter’s 21 mm diameter and 20 mm shank offer straightforward integration into standard tool holders, while compatibility with ENMX 0604 inserts reduces tooling complexity — order directly via Metav Werkzeuge or contact the sales team for specification advice. Shaft-mounted milling cutter S110TM — indexable-insert milling cutter, Ø 21 mm, shank Ø 20 mm (Teknik Makina) The Shaft-mounted milling cutter S110TM is engineered for industrial milling operations using ENMX 0604 indexable inserts; it is intended for installations requiring a compact diameter with extended reach and secure Torx clamping Compatible with ENMX 0604 inserts 21 mm cutting diameter, 20 mm shank 150 mm overall length for extended reach Triple-edge design for increased stability Consistent compatibility reduces inventory complexity The cutter is designed around the ENMX 0604 indexable insert standard, which streamlines spare-part management and tool changes. Matching inserts from YG-1 make replacement predictable and economical, while the indexable design separates cutting geometry from the body so that only the insert needs renewal. This approach lowers operating expenditure and shortens machine downtime compared with solid-tool replacements, offering a clearer total-cost-of-ownership picture for production planning. Geometry and fastening for stable cutting performance A triple-cutting-edge configuration with a compact 21 mm diameter combined with a 20 mm shank gives the tool inherent rigidity during axial and radial engagement. The insert is secured with a Torx screw (specified M2.5x7) and tightened using a T8 key, which together provide reliable clamp force and repeatable seating of the insert. The result is reduced vibration, improved surface finish and predictable tool life — all relevant when cycle-time and surface integrity are priorities. Reach and accessibility for versatile set-ups With an overall length of 150 mm, the cutter is suited to operations that demand additional reach without resorting to oversize tooling. The extended length enables machining in deeper cavities or across wider faces while maintaining acceptable stiffness for light to medium material removal tasks. The combination of compact diameter and extended reach supports flexible fixturing and multi-operation sequences on a single spindle set-up. Workshop integration and serviceability The design supports straightforward maintenance: standardised insert geometry and Torx fastening simplify spare parts provisioning and routine servicing. The shank diameter and overall dimensions align with common holder standards, enabling quick toolholder changes and minimal set-up time in mixed-production environments. For procurement and workshop supply, Metav’s distribution and technical filter for the European market can assist with matching inserts and ensuring continuity of supply. Contact Metav Werkzeuge for precise compatibility checks and stock information on the S110TM — expert advice and reliable delivery from Emmerich is available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S110TM Product name: Shaft-mounted milling cutter for ENMX 0604 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting edges: 3 Torx screw: M2.5x7 Torx key size: T8 Special features For ENMX 0604 indexable inserts Compatible with YG-1 inserts Indexable-insert system for economical reconditioning FAQ Which insert type fits this cutter? The S110TM accepts ENMX 0604 indexable inserts; compatibility with YG-1 inserts is indicated in the technical data. What are the key dimensions to check for toolholder compatibility? Relevant dimensions are the 21 mm cutting diameter and 20 mm shank diameter; the overall length is 150 mm for reach considerations. How is the insert secured? Insert clamping is specified with a Torx screw (M2.5x7) and requires a T8 key for tightening and removal. How many cutting edges does the cutter have and what is the effect? The cutter features 3 cutting edges, a geometry that balances chip evacuation with axial stability for consistent surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust indexable-insert milling body with a 32 mm shank and five cutting edges for steady material removal and predictable tool life; order the tooling directly via Metav Werkzeuge or consult the technical team for application support. Shaft milling cutter S114TM — indexable-insert milling body, 32 mm shank, 5 cutting edges (Teknik Makina) A Shaft milling cutter S114TM engineered as an indexable-insert milling body for light to medium milling tasks, designed to accept ENMX 0604 inserts and to work with common workshop toolholders. Compatible with ENMX 0604 inserts 32 mm shank for secure clamping Five cutting edges for increased productivity M2.5x7 Torx screws, T8 key included Stable engagement and predictable cutting performance The cutter body is built around a 32 mm shank, providing a rigid interface with standard toolholders to reduce vibration and improve surface finish. With an overall length of 150 mm, the design balances reach and stiffness to maintain repeatable results in serial milling. The arrangement of five cutting edges distributes cutting forces and allows for consistent chip removal, which leads to longer service intervals and fewer interruptions in production. These characteristics contribute directly to higher process reliability and measurable productivity gains. Easy maintenance and fast insert changes for minimal downtime Compatibility with ENMX 0604 indexable inserts and the use of M2.5x7 Torx screws (drive size T8) simplifies service routines at the bench. The insert pocket and clamping geometry permit quick replacement of worn inserts, reducing machine idle time and tooling handling. A well-structured insert system, paired with the cutter body, ensures that the capital invested in inserts is turned into usable cutting life with minimal setup overhead — a cost-efficient approach for repetitive milling operations. Broad workshop compatibility and application flexibility The milling body accepts inserts from established suppliers such as YG-1, enabling selection of grades and geometries suited to aluminium, steels or hardened materials where appropriate. The tool functions as an indexable-insert milling body that can be integrated into typical CNC and manual machining workflows, supporting both production and maintenance environments. Clear mechanical features and standardised fastenings mean the tool is straightforward to spec into existing tool lists and procurement processes, ensuring rapid deployment across multiple machines. Contact Metav Werkzeuge for tailored technical advice and ordering of the Teknik Makina S114TM milling body; technical queries by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: S114TM Manufacturer: Teknik Makina EAN / classification: eClass 21180806, ETIM EC011860 Facts Shank / clamping diameter: 32 mm Overall length: 150 mm Number of cutting edges: 5 Insert type: ENMX 0604 Recommended insert supplier: YG-1 Torx screw: M2.5x7 Torx key: T8 Special features Indexable-insert milling body Standardised Torx clamping system Suitable for light to medium milling Designed for quick insert replacement FAQ What insert type fits this milling body? The S114TM accepts ENMX 0604 indexable inserts, allowing selection of grades and geometries compatible with the cutter body. Is a specific insert supplier required? The milling body is compatible with inserts from YG-1 and other manufacturers that provide ENMX 0604 inserts; material and grade selection depend on the machined material. What are the key dimensions for machine setup? Critical dimensions are a 32 mm shank for toolholder clamping and 150 mm overall length, with five cutting edges for load distribution. Which screw and key are used for insert clamping? Insert clamping uses an M2.5x7 Torx screw and a T8 Torx key for secure, repeatable fastening. Can this tool be used on CNC milling machines and manual machines? Yes — the indexable-insert body is suitable for standard CNC toolholders and for manual setups that accept a 32 mm shank, providing flexible application across the shop floor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 20 mm shank and compatibility with LNMT 0804 indexable inserts to improve cycle stability and reduce setup time. The tool combines a compact overall length with three balanced cutting edges for smooth metal removal; order directly via Metav Werkzeuge or contact their consultants for application advice. Insert Milling Cutter S302TM — Indexable insert shank cutter with 20 mm shank (Teknik Makina) The Insert Milling Cutter S302TM is a shank-mounted milling tool designed for industrial machining with LNMT 0804 indexable inserts, offering reliable stability for medium-duty milling operations 20 mm shank for rigid machine spindles Compatible with LNMT 0804 indexable inserts Three cutting edges for balanced cutting Torx M2.5×7 fastening, T8 key included Increase throughput with balanced indexable cutting Equipped with three cutting edges, this shank-mounted cutter provides a steady metal removal rate and reduced vibration compared with asymmetrical geometries. The balanced cutter geometry and 20 mm shank improve run-out behaviour, which directly benefits surface finish and tool life in serial production. For operations where consistent cycle times matter, the combination of a compact overall length and a robust shank reduces the need for repeated fixture adjustments and supports more predictable machining results. Fast insert changes and predictable set-up Designed for use with LNMT 0804 indexable inserts, the tool enables quick turnover between cutting edges: indexable inserts are replaceable carbide plates that can be rotated or exchanged without regrinding the entire tool. The insert is secured by a Torx M2.5×7 screw, tightened with a T8 key, ensuring straightforward maintenance and low downtime. With a 40 mm cutting length, the holder offers a clear cutting window for many face and shoulder milling tasks, making insert replacement and controlled regrinding intervals both simple and economical. Practical compatibility and workshop benefits The insert holder is specified for compatibility with ISCAR plates and is suitable for a range of common ferrous machining tasks where indexable solutions are preferred. The tool’s moderate overall length of 150 mm and its mass contribute to a stable cutting platform without excessive overhang. This makes the tool suitable for both compact machining centres and heavier milling machines where stability and predictable tool behaviour are required. The construction supports reliable clamp-up and repeatable positioning, reducing setup time across batch changes. Contact Metav Werkzeuge for an application review or to arrange supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S302TM Manufacturer: Teknik Makina SKU: S302TM Compatible inserts: LNMT 0804 Compatible insert manufacturer: ISCAR Data Shank diameter: 20 mm Cutting length: 40 mm Overall length: 150 mm Weight: 0.391 kg Diameter: 20 mm Number of cutting edges: 3 Special features Torx screw: M2.5x7 Torx key size: T8 Shank-mounted insert holder Indexable insert system for quick replacement FAQ Is this tool compatible with ISCAR inserts? The insert milling cutter S302TM is specified for LNMT 0804 inserts and is compatible with ISCAR indexable insert types designed to the same geometry. How is the insert secured and replaced? Replacement is performed using the Torx M2.5×7 screw; a T8 key is provided for secure fastening, allowing quick and repeatable insert changes on the S302TM holder. What machine spindles are suitable for this cutter? Machines with a tool holder or collet capable of accepting a 20 mm shank will suit this insert holder; the shank diameter helps ensure rigid clamping and improved run-out performance. Which applications benefit most from this tool? The holder is intended for medium-duty milling tasks where quick insert changes and consistent cycle times are priorities, such as face milling, shoulder milling and general finishing with indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable 20 mm shank, precise indexing for LOGU 0303 inserts and a 150 mm overall length to keep tool changes short and production steady — order the cutter directly via Metav Werkzeuge or consult the technical advisors for integration support. S678TM shank milling cutter — 20 mm shank, for LOGU 0303 indexable inserts (Teknik Makina) The S678TM is a robust insert milling cutter body designed for modular milling operations with LOGU 0303 indexable inserts, offering secure clamping and straightforward maintenance in industrial machining environments. 20 mm shank diameter for stable clamping Compatible with LOGU 0303 indexable inserts Three cutting edges for balanced material removal M3x6 Torx screw included (T8 key required) Stable clamping and consistent cutting performance Engineered for repeatable accuracy, the cutter body features a 20 mm shank that ensures secure clamping in standard tool holders, reducing runout and vibration during machining. The three cutting edges provide a balanced cutting action that helps maintain surface quality and tool stability across the cutting pass. By using an insert system rather than brazed cutters, the design simplifies maintenance: worn edges are replaced quickly, limiting machine downtime and keeping productivity high. The solid mounting interface supports reliable repeatability for batch production tasks. Modular insert system that reduces operating costs The modular design accepts LOGU 0303 indexable inserts and is compatible with Kyocera tooling options, enabling flexible selection of grades and geometries to suit different workpieces. Using indexable inserts lowers ongoing tooling costs because only the insert is replaced when worn, not the entire cutter body. The retention uses an M3x6 Torx screw, with a T8 key required for secure fastening, enabling fast and straightforward insert changes at the machine. This approach supports efficient shift handovers and simplifies inventory management in the tool crib. Workshop-ready dimensions and integration benefits With a 150 mm overall length and a nominal 20 mm diameter, the cutter body integrates into common machining setups without bespoke adaptors. The compact profile helps preserve accessibility in tight fixtures while delivering a standard interface for spindle adapters and holders. The construction suits repetitive milling operations where predictable tool geometry and short changeover times are valued. For procurement and workshop planners, the combination of standardised interfaces and compatibility with widely available LOGU 0303 inserts makes this cutter body a practical choice for mixed production environments. For reliable, modular milling choose the Teknik Makina S678TM — contact Metav Werkzeuge in Emmerich for tailored application advice and order coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S678TM Manufacturer: Teknik Makina Product: Shank milling cutter For inserts: LOGU 0303 indexable inserts Compatible insert maker: Kyocera Core data Shank diameter: 20 mm Diameter: 20 mm Overall length: 150 mm Cutting edges: 3 Torx screw: M3x6 Special features Torx key required: T8 eClass: 21180806 ETIM: EC011860 FAQ Which indexable inserts fit this cutter body? The cutter body accepts LOGU 0303 indexable inserts; compatibility with Kyocera grades is specified for flexible grade selection. What is the shank diameter and why does it matter? The 20 mm shank ensures stable clamping in standard holders, reducing runout and improving surface finish with the S678TM cutter body. How are the inserts secured? Inserts are fixed with an M3x6 Torx screw; a T8 key is used for tightening and replacement. Is this cutter suitable for serial production? Yes — the modular insert system and balanced three-edge geometry support repeatable results and short tool-change times for series work. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust geometry with secure clamping for consistent machining results: the tool combines a Ø21 mm cutting diameter, a 20 mm shank and three cutting edges to deliver stable material removal and straightforward insert replacement. Order the tool directly via Metav Werkzeuge or consult the Metav advisors for application guidance and fast supply. Schaftfräser S679TM — Shank milling cutter, Ø21 mm, 3 flutes (Teknik Makina) The Schaftfräser S679TM is a shank milling cutter designed to accept LOGU 0303 indexable inserts and suited to repetitive milling tasks where secure insert clamping and consistent cutting geometry are required Ø 21 mm cutting diameter 20 mm shank for secure clamping 3 cutting edges for stable removal Compatible with Kyocera LOGU 0303 inserts Delivering consistent cutting performance for production runs The solid tool body and optimised flute geometry ensure repeatable results in cyclic milling operations. With a Ø21 mm diameter and a 20 mm shank, the cutter reduces runout and enhances toolholder engagement, which improves dimensional stability on serial work. The 3 flutes provide a balance between chip evacuation and cutting engagement, enabling steady feed rates while maintaining surface quality. This combination supports efficient machining cycles and predictable tool life, making the cutter suitable for organised shop-floor production. Fast insert changes and secure clamping to minimise downtime Designed for indexable inserts, this cutter uses a standard Torx fastening system that keeps service times short. The use of an M3x6 Torx screw and the corresponding T8 key allows quick and repeatable insert clamping, reducing non-productive time during re‑gripping or insert replacement. Compatibility with Kyocera LOGU 0303 inserts means access to readily available cutting grades and geometries; the result is lower inventory complexity and faster restoration of cutting performance after a tool change. Clear mechanical fixation ensures consistent seat contact and predictable cutting behaviour. Integrating the cutter into workshop workflows with reliable supply As a purpose-built shank milling tool from Teknik Makina, the design focuses on straightforward integration with common toolholders and indexable insert systems. The measured dimensions — Ø21 mm cutting diameter, 20 mm shank and 150 mm overall length — make it a pragmatic choice for operations where tool stability and repeatability matter. Where longer runs and tight scheduling are part of the workflow, the tool’s compatibility with widely used insert systems and standard fastening reduces logistical friction and supports efficient stocking strategies at the workbench. For precise, reliable milling with Teknik Makina quality, contact Metav Werkzeuge in Emmerich for tailored advice and assured supply: info@metav-werkzeuge.com; +49 2822 7131930 Technical Data Article number: S679TM Name: Schaftfräser Description: for LOGU 0303 Indexable Inserts Manufacturer: Teknik Makina Data Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting edges: 3 Special features Compatible inserts: LOGU 0303 (Kyocera) Fastening screw: M3x6 Torx Torx key: T8 Application: milling with indexable inserts FAQ Which inserts fit this milling cutter? The cutter accepts LOGU 0303 indexable inserts; compatibility with Kyocera LOGU 0303 inserts is specified for straightforward replacement and access to common grades. What are the key dimensions of the tool? The milling cutter has a 21 mm cutting diameter, a 20 mm shank diameter and a 150 mm overall length, providing stable clamping and suitable reach for many shop applications. How are the inserts secured in the cutter? Inserts are retained with an M3x6 Torx screw; a T8 Torx key is required for secure and repeatable clamping of the indexable inserts. Is this cutter suitable for quick tool changes in production? Yes, the combination of standard Torx fixation and LOGU 0303 insert compatibility is intended to minimise downtime and support efficient insert replacement in serial production. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, production-ready milling solution: a solid 32 mm shank provides stability, the tool accepts RDMT 1003 indexable inserts for economical cutting, and the three cutting edges deliver consistent material removal. Order the shaft cutter directly via Metav Werkzeuge or consult our specialists for application support. R204TM shaft cutter for RDMT 1003 indexable inserts — 32 mm shank, 3 cutting edges (Teknik Makina) The R204TM shaft cutter for RDMT 1003 indexable inserts is a purpose-built milling tool engineered for stable, repeatable performance in industrial machining environments. 32 mm shank diameter for stable toolholding Three cutting edges for smooth chip control 45 mm cutting length improves reach and versatility Compatible with RDMT 1003 indexable inserts Stability that reduces vibration and improves finish A generous 32 mm shank and compact mass provide a stable connection to the spindle, which reduces vibration and supports consistent surface quality in serial production. This structural stability translates into fewer rejected parts and lower rework time, enhancing overall process reliability. The design supports high clamping rigidity so that accuracy is preserved during heavier cuts, contributing to measurable productivity gains and predictable cycle times. Productivity through indexable inserts and optimised cutting geometry Accepting RDMT 1003 indexable inserts allows fast insert changes and cost-efficient use of cutting material. With 3 cutting edges, the tool balances chip load evenly across each rotation, improving chip evacuation and allowing sustained cutting performance. The indexable system reduces downtime for tool maintenance and spreads tooling cost across multiple edges, making the cutter a pragmatic choice for medium- to high-volume milling tasks where repeatability and quick serviceability matter. Practical service features for fast changeover Service and changeover are simplified with clear fastenings: a M3.5 locking screw and a Torx screw M3.5x8.5 secure the insert reliably, while the supplied Torx key T15 ensures correct tightening without specialised tooling. The accessible screw arrangement and standardised fastening sizes shorten maintenance intervals and reduce the risk of incorrect assembly. These features help maintain consistent cutting conditions and lower the probability of tool-related stoppages on the shopfloor. Suitable form factor for diverse machining setups With a 45 mm cutting length and 150 mm overall length, the tool offers a blend of reach and rigidity suitable for a wide range of milling operations where RDMT 1003 inserts are used. The moderate mass of 0.898 kg is compatible with many toolholders without imposing excessive centrifugal forces at typical spindle speeds. The configuration supports adaptable setups on milling heads and machining centres, making the cutter appropriate for series production and flexible workshop applications. Consult Metav Werkzeuge for technical advice and to arrange supply of the Teknik Cutting Tools R204TM shaft cutter with 32 mm shank for reliable production results Technical data Article number: R204TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting length: 45 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.898 kg Special features Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ Which inserts fit this cutter? The cutter is designed for RDMT 1003 indexable inserts; use inserts compliant with that designation for correct seating and cutting performance. Is the shank suitable for heavy-duty milling? The 32 mm shank offers high rigidity for stable milling; however, final suitability depends on the machine spindle and cutting parameters selected for each job. What fasteners are used to secure the inserts? The tool uses a M3.5 locking screw and a M3.5x8.5 Torx screw; a T15 Torx key is specified for assembly and torque control. Can the cutter be used on standard toolholders? The cutter’s shank diameter and form factor make it compatible with commonly used toolholders that accept a 32 mm shank, subject to correct clamping practice. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, insert-based milling solution that combines stable clamping with swift insert changes; the 25 mm shank and 50 mm cutting length ensure reliable medium-depth passes while compatibility with VCGT 1604 inserts simplifies tool management — order via Metav Werkzeuge or consult our specialists for application-specific advice. Insert milling cutter S710TM – for VCGT 1604 indexable inserts (Teknik Makina) The Insert milling cutter S710TM is a shank-mounted milling tool designed for precision steel machining with VCGT 1604 indexable inserts, offering a balanced combination of rigidity and serviceability for production and job-shop environments. 25 mm shank for stable clamping Compatible with VCGT 1604 indexable inserts 50 mm cutting length for medium-deep passes Secured with M4x10 Torx screw (T15) Consistent cutting performance for efficient production The S710TM delivers predictable metal removal by combining a 25 mm shank with a compact geometry that reduces chatter and improves surface quality. Using VCGT 1604 indexable inserts allows maintenance of a consistent cutting edge geometry across multiple operations, which reduces setup time and increases uptime. With 2 cutting edges the tool balances material removal rate and tool life, making it suitable for standard to demanding milling cycles where repeatability matters. Secure clamping and fast insert changes for less downtime A robust fastening system using an M4x10 screw and Torx T15 key ensures the insert is clamped precisely and can be changed quickly during shift work. This secure connection lowers the risk of insert movement under load and supports higher feed rates within the cutter’s operating envelope. The clear mechanical interface simplifies replacement routines and helps maintain process stability across batch runs. Engineered for reliable steel machining and longevity Designed with practical workshop needs in mind, the cutter is optimised for steel machining, delivering stable cuts and predictable wear behaviour. The 50 mm cutting length gives sufficient reach for common slotting and peripheral passes without compromising rigidity, while the shank configuration keeps the tool runout low. The result is fewer scrapped parts and more consistent component tolerances in daily production. Easy integration into existing tooling systems With compatibility for standard VCGT 1604 inserts and a conventional shank diameter, the tool integrates smoothly into established toolholders and machine setups. The overall compact design and a weight of 0.518 kg make handling and storage straightforward, while the standardised insert format reduces the variety of spare parts required. This facilitates leaner inventory management and helps maintain continuous supply to the workbench. Contact Metav Werkzeuge in Emmerich for personalised application advice and dependable supply of the Teknik Makina S710TM insert milling cutter, including technical data and order assistance Technical data Article number: S710TM Manufacturer: Teknik Makina Key measurements Shank diameter: 25 mm Cutting length: 50 mm Overall length: 150 mm Diameter: 25 mm Number of cutting edges: 2 Weight: 0.518 kg Features & compatibility For VCGT 1604 indexable inserts Fastening screw M4x10 Torx key size T15 Shank-mounted insert cutter Suitable for steel machining FAQ Which inserts fit this cutter? The S710TM is designed for VCGT 1604 indexable inserts; this format provides a wide choice of grades for different steels and cutting conditions. What is the shank diameter and why does it matter? The shank diameter is 25 mm, which provides stable clamping and low runout when used with appropriate collets or holders, improving machining accuracy. How long is the cutting length and what does that enable? The tool offers a 50 mm cutting length, suitable for medium-depth passes and common milling tasks without excessive overhang. Which screw and key are required for insert changes? Insert retention uses an M4x10 screw and a Torx T15 key for secure and repeatable clamping. Is this cutter suitable for high-speed milling? The S710TM is optimised for stable steel machining and repeatable performance; cutting speed suitability depends on insert grade and machine capability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 20 mm shank and 40 mm cutting length, designed for stable milling and accurate edge positioning when used with WNMX 0603 indexable inserts; secure clamping via a Torx M2.5×5.5 screw ensures repeatable results. Order this cutting solution directly via Metav Werkzeuge or consult Metav’s specialists for application guidance. S899TM — Shank milling cutter for WNMX 0603 indexable inserts, 20 mm shank The S899TM is a shank milling cutter engineered for use with WNMX 0603 indexable inserts, offering a compact overall length and an even cutting geometry for shoulder milling and face operations in production environments. 20 mm shank diameter 40 mm cutting length Compatible with WNMX 0603 inserts Rigidity and repeatable accuracy for productive milling The tool’s 20 mm shank and 150 mm overall length provide a balance between reach and stiffness, reducing vibration at moderate depths of cut. A sturdy shank diameter supports consistent edge engagement, which translates into improved surface finish and longer insert life. The cutter’s geometry, with a 90° cutting angle, enables true square-shoulder milling and simplifies process planning where perpendicular walls are required. These attributes reduce rework and contribute to smoother production flows in machining centres. Secure clamping and insert compatibility for reduced downtime Clamping is performed with a Torx M2.5×5.5 screw secured by a T8 key, ensuring positive, repeatable seating of the indexable insert. The holder is specified for WNMX 0603 inserts and is suited to the Korloy insert range, providing a straightforward supply-chain match for shops using that standard. The two-cutting-edge configuration stabilises cutting forces and often allows for efficient material removal on interrupted or continuous cuts, decreasing the frequency of insert changes and minimising downtime. Practical benefits in the workshop and CNC cell With a 40 mm cutting length and a two-flute layout, the cutter supports effective chip evacuation while maintaining an economical tool inventory. The modest mass (approx. 0.378 kg) eases handling and spindle load considerations without compromising rigidity for typical medium-duty milling tasks. For production planners, the combination of standardised insert format and compact dimensions aids in predictable cycle times and easier tool-change management, contributing to overall process reliability and cost efficiency. For tailored technical advice on integrating the Teknik Cutting Tools S899TM into existing tool sets, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast, practical guidance. Technical Data SKU: S899TM Manufacturer: Teknik Makina Article description: Shank milling cutter for WNMX 0603 indexable inserts Numbers / Core Technical Data Shank diameter: 20 mm Cutting length: 40 mm Overall length: 150 mm Weight: 0.378 kg Number of cutting edges: 2 Cutting angle: 90° Special features Compatible with WNMX 0603 indexable inserts Recommended insert manufacturer: Korloy Torx screw: M2.5×5.5 Torx key: T8 FAQ What insert type is required for this cutter? The cutter is designed for WNMX 0603 indexable inserts; Korloy inserts are listed as compatible and fit the clamping arrangement. How is the insert secured in the holder? An M2.5×5.5 Torx screw is used for clamping, tightened with a T8 key to provide repeatable seating of the insert. Which operations suit this shank cutter best? The tool is appropriate for shoulder and face milling where a 90° cutting angle is required and where moderate cutting lengths (up to the specified 40 mm) are sufficient. Is the tool suitable for heavy roughing passes? The two-flute design and 20 mm shank make the cutter suitable for medium-duty milling; for heavy roughing, assessment against machine rigidity and cutting parameters is advised. What dimensions should be considered when planning tool holders? Key dimensions are a 20 mm shank diameter and 150 mm overall length, which should be matched to the spindle and holder clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust chip control and easy insert replacement with a tool that combines internal coolant and a stiff 20 mm shank for steady performance; compatible with WNMX 0603 indexable inserts and available through Metav Werkzeuge — contact our consultants for application advice or ordering. Shank Milling Cutter for WNMX 0603 Indexable Inserts — 20 mm shank, internal coolant (Teknik Makina) The Shank Milling Cutter for WNMX 0603 Indexable Inserts is a 20 mm shank tool engineered for stable milling operations with integrated coolant to improve tool life and surface finish. Robust 20 mm shank diameter Integrated internal coolant supply Compatible with WNMX 0603 inserts Secure Torx screw fixing Achieve consistent material removal and lower tooling costs This milling solution pairs replaceable carbide edges with a rigid holder to deliver both flexibility and economy. By using WNMX 0603 indexable inserts, the cutting edges can be exchanged quickly, reducing downtime and the need for complete regrinds. The internal coolant channel supplies cutting fluid directly to the cutting zone, improving thermal management and enabling longer insert life with more consistent dimensional results. As a result, production runs benefit from reduced tooling expenditure and fewer interruptions, supporting steady throughput in repetitive milling tasks. Maintain process stability with a stiff shank and balanced geometry A 20 mm shank and moderate overall length give a favourable stiffness-to-reach ratio for many machining setups. The tool’s two cutting edges and a 40 mm cutting length provide a stable cutting action with predictable chip formation. The combination of compact mass and balanced geometry reduces vibration, which improves surface finish and extends insert life. For shops seeking predictable cycle times and repeatability, this design translates technical rigidity into measurable productivity gains. Fast, secure insert clamping and straightforward integration Insert retention is accomplished with a Torx T8 key and an M2.5x6.5 Torx screw for reliable fastening and quick service intervals. Compatibility with Korloy-specified inserts simplifies procurement and inventory management, while the shank dimensions and overall length support common toolholding systems. The compact weight of the assembly aids handling during tool changes, and the internal coolant option supports better chip evacuation and lower cutting temperatures — both useful when machining demanding features. For complex applications, Metav’s technical team can advise on insert grades and coolant strategies to match the machining task. Contact Metav Werkzeuge for tailored advice on application, insert selection and supply of the Teknik Makina shank milling cutter (SKU S899-1TM) to ensure optimal results for specific machining challenges Technical data SKU: S899-1TM UID: S899-1TM Label: 20 mm shank milling cutter WNMX 0603 L150 mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 150 mm Weight: 0.378 kg Shank diameter: 20 mm Cutting length: 40 mm Number of cutting edges: 2 Torx key: T8 Torx screw: M2.5x6.5 Special features Internal coolant: yes Compatible inserts: WNMX 0603 Compatible insert manufacturer: Korloy Tool type: shank milling cutter Insert fastening: Torx screw FAQ Which inserts fit this cutter? The shank milling cutter accepts WNMX 0603 indexable inserts; compatibility with Korloy inserts is indicated for the Teknik Makina tool (SKU S899-1TM). Does the tool supply coolant to the cutting edge? Yes — the cutter includes internal coolant to direct fluid to the cutting zone for improved cooling and chip evacuation. What are the key dimensions to check for toolholder compatibility? Important dimensions are the 20 mm shank diameter and 150 mm overall length; check the toolholder for a 20 mm shank capacity to ensure secure mounting. How are the inserts secured and serviced? Inserts are secured with an M2.5x6.5 Torx screw, tightened using a Torx T8 key for quick and secure insert changes. Is this cutter suitable for automated tool change systems? The cutter’s standard shank diameter and balanced design make it suitable for common toolholders; confirm the specific toolholder interface and machine reach before integrating into an automated cell. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the 21 mm cutting diameter and robust Ø20 mm shank for consistent machining performance and short tool change times; benefit from secure fastening with the M3x7 Torx screw and straightforward maintenance. Order directly via Metav Werkzeuge or request technical consultation for seamless integration into production. S836TM shank-mounted milling cutter — 21 mm diameter, for XNKT 0604 indexable inserts by Teknik Makina The S836TM shank-mounted milling cutter is designed for reliable face and profile milling with indexable technology, pairing a compact diameter with high stability for industrial machining. Compatible with XNKT 0604 indexable inserts 21 mm cutting diameter for stable machining Two cutting edges for efficient material removal Shank Ø20 mm and overall length 150 mm Stable geometry for precise, repeatable milling The cutter's geometry delivers a reliable balance between rigidity and chip evacuation. With a 21 mm cutting diameter and a Ø20 mm shank, the tool offers high radial stiffness that reduces vibration and improves surface finish. The presence of two cutting edges minimises cutting forces per edge, allowing for controlled feed rates and longer insert life. This combination supports consistent process windows in series production and helps to reduce scrap rates through improved dimensional stability. Fast insert changes and secure clamping for minimal downtime Tool maintenance and indexable insert replacement are kept simple through a standard Torx fastening system. The insert is secured with an M3x7 Torx screw tightened using a T8 key, enabling fast, repeatable clamping without special fixtures. Compatibility with XNKT 0604 indexable inserts — including those from Korloy — ensures wide availability of grades and geometries for different materials and cutting conditions. The result is reduced spindle downtime and quick adaptation to varying workpiece requirements. Designed for workshop integration and reliable handling Practical dimensions make the cutter straightforward to mount and balance in machining centres: 40 mm cutting length and 150 mm overall length provide good accessibility while keeping overhang moderate. At 0.372 kg, the tool is light enough for safe handling yet robust enough for demanding milling tasks. The 90° cutting angle is suitable for face milling and light shoulder operations, helping to achieve uniform contact and predictable tool wear. Where process reliability and repeatability matter, this milling solution supports efficient machining cycles and consistent part quality. For reliable milling performance and expert advice on application-specific setups, request supply and technical consultation from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the S836TM and suitable insert grades. Technical data Article number: S836TM Manufacturer: Teknik Makina Product: Shank-mounted milling cutter for XNKT 0604 indexable inserts Facts Diameter: 21 mm Shank diameter: 20 mm Cutting length: 40 mm Number of cutting edges: 2 Overall length: 150 mm Weight: 0.372 kg Cutting angle: 90° Special features Compatible inserts: XNKT 0604 Compatible insert maker: Korloy Torx screw: M3x7 Torx key: T8 SKU: S836TM FAQ What insert type fits this shank-mounted cutter? The S836TM accepts XNKT 0604 indexable inserts, a common size that allows selection of grades and chipbreakers for the intended material and machining conditions. Is the cutter compatible with Korloy inserts? Yes — the cutter is specified as compatible with inserts from Korloy, enabling access to a broad range of cutting grades. What are the key dimensions to check for spindle compatibility? Important dimensions are the Ø20 mm shank, 21 mm cutting diameter, 40 mm cutting length and 150 mm overall length; these determine clamping and reach in the selected tool holder. Which fastening system is used for the inserts? Insert clamping uses an M3x7 Torx screw tightened with a T8 key, providing secure and repeatable fixation. Can this cutter be used for both face and shoulder milling? With a 90° cutting angle and two cutting edges, the tool is suited for face milling and light shoulder milling tasks where the specified geometry matches the application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust shank stability and a long cutting length to maintain consistent production quality while reducing changeover time; order the tool directly via Metav Werkzeuge or consult our specialists for tailored machining advice. Insert Milling Cutter S640TM — 20 mm shank, for XOMX 0602–1204 indexable inserts (Teknik Makina) The Insert Milling Cutter S640TM is a shank-mounted milling cutter body engineered for reliable square-shoulder milling and efficient insert changes in industrial and workshop environments. 20 mm shank diameter for stable clamping 55 mm effective cutting length Compatible with XOMX 1204 indexable inserts Quick insert clamping with M3.5x8.5 Torx screws Precision and rigidity for consistent component quality The S640TM tool body combines a 20 mm shank with a compact, weight-balanced design to ensure stable clamping and reduced vibration during operation. This rigidity translates directly into improved surface finish and longer insert life, especially when producing repetitive features. By focusing on machining stability, the cutter body supports predictable tool performance and helps maintain tight tolerances on shoulder and face milling operations. Faster changeovers and lower tooling costs through insert technology Using XOMX 1204 indexable inserts allows economical replacement of cutting edges instead of whole tools, cutting downtime and consumable expense. The insert pocket secures the insert with M3.5x8.5 Torx screws, compatible with a T10 key, which simplifies maintenance and reduces set-up time on the machine. With 2 cutting edges, the system balances cutting capacity and cost-efficiency for medium-duty milling tasks, while the 55 mm cutting length gives suitable reach for a range of slotting and shoulder operations. Purpose-built for workshop and industrial workflows Designed with practical workshop use in mind, the cutter body offers an overall length of 150 mm and a measured weight of 0.439 kg, enabling straightforward handling during tool changes and storage. The tool provides a 90° cutting angle, making it well suited to square-shoulder milling where dimensional accuracy is required. Its construction supports steady cutting performance across repeated cycles, contributing to reliable process outputs on production runs. Simple installation and broad compatibility The insert holder accepts the insert sizes specified for XOMX 0602–1204 series and is listed as compatible with inserts from SECO, enabling integration into existing tooling portfolios. The clamping uses standard Torx hardware (screw: M3.5x8.5; driver size: T10) for secure fixation of the indexable inserts and straightforward reassembly. As a modular alternative to solid end mills, the cutter body provides flexible reconfiguration of cutting geometry while preserving shop-floor efficiency. For secure, efficient indexable milling choose the Teknik Makina S640TM — contact Metav Werkzeuge for technical guidance and reliable supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S640TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Fits inserts: XOMX 0602–1204 Indexable Inserts Compatible insert manufacturer: SECO Facts Shank diameter: 20 mm Effective cutting length: 55 mm Number of cutting edges: 2 Overall length: 150 mm Weight: 0.439 kg Cutting angle: 90° Special features Torx screw: M3.5x8.5 Torx key size: T10 Insert size compatibility: XOMX 1204 Shank-mounted insert milling cutter body FAQ What insert sizes are compatible with this cutter body? The S640TM accepts the XOMX 0602–1204 series of indexable inserts and is compatible with XOMX 1204 inserts in particular. Which screw and driver are required to secure the inserts? Insert clamping uses M3.5x8.5 Torx screws; a T10 driver is specified for reliable tightening. Is the tool compatible with SECO inserts? Yes, the cutter body is listed as compatible with inserts from SECO, enabling straightforward integration into SECO-based tooling systems. What cutting geometry does the cutter provide for shoulder milling? The body is designed for a 90° cutting angle, delivering square-shoulder milling suitable for precise face and shoulder features. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable 25 mm shank, compatibility with LOGU 0303 indexable inserts and a four-edge cutting geometry that keeps cycle times low and surface finish high; order the shaft cutter directly via Metav Werkzeuge or ask our consultants if needed. S680TM — Shaft cutter, 25 mm shank, for LOGU 0303 indexable inserts (Teknik Makina) S680TM is a precision shaft cutter engineered for use with LOGU 0303 indexable inserts, optimised for secure clamping and repeatable milling performance in industrial machining environments. For LOGU 0303 indexable inserts 25 mm shank for stable clamping Four cutting edges for smooth cuts Torx M3x6 screw, T8 key interface Engineered for consistent milling performance and reduced vibration The S680TM combines a 25 mm shank with a balanced overall design to deliver stable clamping and dependable tool behaviour during machining. A larger shank diameter reduces unwanted movement in the holder and helps maintain concentricity, which in turn improves surface finish and prolongs tool life. The emphasis on mechanical stability translates into fewer scrap parts and more consistent process output for serial production. Quick insert changes and broad tooling compatibility for uptime gains Designed for LOGU 0303 indexable inserts from Kyocera, this cutter supports fast insert replacement without regrinding. Indexable systems separate the cutting edge from the tool body, enabling rapid changeovers and predictable cutting geometry. The result is lower downtime and predictable machining quality, which is particularly advantageous for production runs and mixed-batch work where tool change efficiency matters. Practical fastening and geometry details that support workshop workflows Standard fastening with a Torx M3x6 screw and T8 key interface ensures secure insert clamping and straightforward maintenance. The tool’s 150 mm overall length and four cutting edges provide a balance between reach and rigidity: more cutting edges can increase material removal rates while maintaining a clean finish when feeds and speeds are set appropriately. These tangible geometry choices make the cutter a pragmatic component in a modern tooling setup. Suitable for industrial applications where repeatability matters The combination of a robust shank, standardised insert format and clear maintenance interfaces makes this cutter suited to production-focused shops and subcontractors that prioritise reproducibility and ease of service. Specification-driven procurement benefits from the tool’s compatibility with established insert systems and its simple, verifiable mechanical features, which facilitate integration into existing tool inventories and clamping systems. Contact Metav Werkzeuge for specialist advice on Teknik Makina shaft cutters and ensure reliable supply and technical alignment from our Emmerich centre Technical data SKU: S680TM Name: Shaft cutter for LOGU 0303 indexable inserts Manufacturer: Teknik Makina Compatible inserts: LOGU 0303 (Kyocera) Facts Shank diameter: 25 mm Diameter: 25 mm Overall length: 150 mm Cutting edges: 4 Torx screw: M3x6 Torx key: T8 Special features Compatibility with Kyocera LOGU 0303 inserts Indexable insert system for fast changeovers Standard Torx fastening for maintenance FAQ Which insert type fits this cutter? The shaft cutter is compatible with LOGU 0303 indexable inserts, an insert format produced by Kyocera. What is the shank diameter of the tool? The S680TM features a 25 mm shank, designed for secure clamping in standard tool holders. How many cutting edges does the cutter have? This cutter is equipped with four cutting edges, supporting smooth cutting action and balanced material removal. Which screw and key are specified for insert fastening? Insert fastening uses a Torx M3x6 screw and requires a T8 key for secure tightening. What is the overall length of the tool? The tool has a 150 mm overall length, providing reach while maintaining rigidity. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable cutter body that pairs Ø12 mm tool geometry with a 46 mm cutting length for efficient, repeatable milling cycles; lightweight construction and standard Torx fastening reduce downtime. Order the shaft milling cutter directly via Metav Werkzeuge or request technical clarification from our consultants. Shaft milling cutter S374TM — indexable cutter body for P32 inserts, Ø12 mm, 46 mm cutting length (Teknik Makina) A Shaft milling cutter S374TM designed as an indexable milling body for P32 indexable inserts, providing compact geometry and straightforward insert replacement for precision milling tasks Ø12 mm cutting diameter 46 mm effective cutting length M5 Torx screw, T20 key Compatible with P32 indexable inserts Faster insert changes through a standard Torx fastening The tool body is configured for rapid insert replacement using an M5 Torx screw and a T20 key, which keeps tool changeovers predictable and short. This standardised fastening method means replacement inserts are held securely and can be re‑indexed or swapped without complex fixtures, supporting consistent cycle times. Compatibility with P32 indexable inserts ensures a wide choice of carbide grades and edge geometries from established insert manufacturers, helping to maintain surface quality and extend overall productivity through reduced non‑cutting time. Small diameter, stable performance for compact operations With a compact Ø12 mm diameter and a 46 mm cutting length, the cutter body is tailored for machining tasks where access and accuracy matter. The modest mass (approx. 0.142 kg) and a 150 mm overall length provide a balanced combination of rigidity and reach, which is beneficial where tool overhang must be managed. The tool geometry is therefore suitable for focused milling operations that demand repeatable results and minimal vibration, contributing to improved process stability in serial production environments. Seamless integration with widely used insert systems Designed to accept P32‑class inserts and listed as compatible with Walter insert types, the tool body simplifies logistics by aligning with common insert inventories. The use of indexable inserts offers a cost‑effective approach to tool life management: worn edges are rotated or replaced without discarding the body, so tooling budgets are stretched further while maintaining cutting performance. This configuration supports shops that prioritise uptime and predictable maintenance intervals. Supply reliability and easy specification for procurement The article is identified as SKU S374TM and is supplied under the Teknik Makina range, making specification straightforward in procurement documentation. Technical details such as diameter, cutting length, fastening type and compatibility are verifiable on delivery notes and product lists, which aids inventory control and cross‑referencing with existing tool holders and insert stocks. The combination of standardised insert format and conventional Torx fixing reduces barriers when introducing the cutter body into established machining cells. For application guidance or to secure supply of the Teknik Makina S374TM, contact Metav Werkzeuge’s specialists in Emmerich for tailored advice and delivery options by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: S374TM Manufacturer: Teknik Makina Product: Shaft milling cutter (indexable body) For inserts: P32 indexable inserts Suitable insert manufacturer: Walter SKU: S374TM Facts Diameter: 12 mm Shank diameter: 12 mm Cutting length (shank): 46 mm Total length: 150 mm Weight: 0.142 kg Fastening screw: M5 Torx key size: T20 eClass: 21180806 ETIM: EC011860 Special features Compatible with P32 12 indexable inserts M5 Torx screw for insert clamping T20 Torx key for assembly/disassembly Compact Ø12 geometry for tight access Lightweight tool body for reduced inertia FAQ What insert type fits this cutter body? The cutter body accepts P32 indexable inserts; it is listed for P32 12 inserts and aligns with standard P32 geometries. Which fastening and key are required to change inserts? Insert clamping is secured with an M5 Torx screw; a T20 key is used for tightening and loosening on the S374TM. Is this tool compatible with inserts from major manufacturers? Yes — the body is specified as compatible with Walter P32 inserts, ensuring interchangeability with common insert suppliers. What identification should be used when ordering or specifying the tool? Use SKU S374TM and reference Teknik Makina as the manufacturer to ensure correct supply and documentation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact insert milling solution that combines a 16 mm shank for rigid clamping with a 25 mm effective cutting length for precise metal removal; order the S471-1TM directly via Metav Werkzeuge or consult the team for application advice. Shank milling cutter S471-1TM — 16 mm shank, for 4NKT 0603 indexable inserts (Teknik Makina) The shank milling cutter S471-1TM is a shank-type insert milling tool designed for machining tasks where rapid insert replacement and consistent cutting geometry are required; suitable for applications using 4NKT 0603 indexable inserts. 16 mm shank diameter for stable clamping 25 mm effective cutting length Accepts 4NKT06 indexable inserts Torx M3x6.5 fastening; T8 key Faster cycle times with predictable insert performance The S471-1TM is engineered as an insert-based milling solution that brings repeatable results to batch production and workshop jobs. By using indexable inserts such as the 4NKT06 family, the cutter allows rapid edge renewal without full-tool replacement, which reduces non-productive time and lowers tooling inventory turnover. The 16 mm shank contributes to a stable tool-holding interface, reducing chatter and helping to maintain consistent surface quality across a run. Robust clamping and simplified servicing Clamping is achieved with a Torx M3x6.5 screw system; a T8 key is specified for adjustment. This proven fastening arrangement offers secure insert retention and straightforward access for replacement, translating to shorter maintenance intervals and predictable setup times. Fewer complex steps during insert changes minimise downtime and support faster shift handovers in mixed-production environments. Compatibility with common insert manufacturers The cutter accepts 4NKT06 inserts and is compatible with inserts from Taegutec, enabling the use of widely available grades and geometries. Standardised insert formats allow stocking of common wear parts and easier qualification of cutting data, which supports efficient process planning and faster reaction to changing production needs while preserving component quality. Balanced design for handling and stability With two cutting edges and a total length of 150 mm, the tool balances reach and rigidity for many peripheral and slotting operations. The modest mass of 0.25 kg aids handling during tool preparation and reduces inertial loads in smaller spindle heads. Together, these attributes support consistent performance in repetitive tasks and make the cutter a reliable option where compact, insert-based tooling is preferred. Contact Metav Werkzeuge for availability, compatibility checks and practical application guidance on the Teknik Makina S471-1TM insert milling cutter Technical data Article number: S471-1TM Manufacturer: Teknik Makina Designation: Shank milling cutter for 4NKT 0603 indexable inserts eClass: 21180806 ETIM: EC011860 Core specifications Shank diameter: 16 mm Effective cutting length: 25 mm Overall length: 150 mm Cutting edges: 2 Diameter: 16 mm Weight: 0.25 kg Special features Accepts 4NKT06 indexable inserts Compatible with Taegutec inserts Torx screw: M3x6.5 Torx key size: T8 FAQ Which insert size fits this cutter? The cutter is designed for 4NKT06 indexable inserts; compatible grades and geometries from Taegutec can be used with the S471-1TM. What is the shank diameter and why does it matter? The 16 mm shank provides a stable clamping interface that helps reduce vibration and maintain cutting accuracy during operation of the S471-1TM. How many cutting edges are active on the tool? This milling cutter is equipped with two cutting edges, giving a balance between material removal rate and surface finish expectations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high compatibility, precise cutting geometry and straightforward clamping for reliable milling cycles; the S572TM delivers consistent chip control and long tool life when paired with BDMT 11T3 indexable inserts. Order via Metav Werkzeuge or consult the technical team for application-specific advice. S572TM shank milling cutter — indexable insert holder with 32 mm shank and 50 mm cutting length S572TM shank milling cutter designed for heavy-duty indexable milling applications using BDMT 11T3 inserts; suitable for general workshop and industrial CNC machining. Indexable inserts compatible BDMT 11T3 32 mm shank with 50 mm effective cutting length Four cutting edges for stable material removal Torx fixing M2.5x5.5 with T8 key Increased productivity through repeatable cutting geometry The holder is engineered to provide repeatable cutter positioning and stable chip evacuation, delivering consistent surface quality and predictable cycle times. The combination of a 32 mm diameter shank and 50 mm cutting length reduces vibration in longitudinal milling, while the tool body ensures correct seat alignment for the BDMT 11T3 style inserts. These design choices improve process stability and make the tool a rational choice where efficient material removal and machine uptime are priorities. Secure clamping and simple service routines The assembly uses a Torx M2.5x5.5 fixing screw secured with a T8 key, enabling reliable insert retention and fast service intervals. With four effective cutting edges, the cutter body balances load across the insert seats to prolong insert life and reduce unplanned stop-start maintenance. The indexable concept allows economical reconditioning of performance by rotating or replacing inserts rather than replacing the entire cutter, supporting predictable operating costs and rapid turnaround during tool changes. Broad compatibility and workshop resilience Designed to accept BDMT 11T3 indexable inserts from established suppliers such as Kyocera, the tool body provides a pragmatic solution for mixed-workshop fleets where interchangeability matters. At 150 mm overall length and an operating weight of approximately 0.961 kg, the shank milling cutter is compatible with standard toolholders and offers a good balance between rigidity and reach. The solid construction supports consistent cutting angles (90°) and is suited to a range of general milling tasks in steel, castings and similar materials when matched to the correct insert grade. For procurement or detailed application guidance, contact Metav Werkzeuge in Emmerich for a tailored recommendation and rapid supply of the Teknik Cutting Tools S572TM shank milling cutter Technical data Article number: S572TM Brand: Teknik Makina Compatible inserts: BDMT 11T3 Compatible insert vendor: Kyocera Fixing screw: M2.5x5.5 Torx Core specifications Diameter: 32 mm Shank diameter: 32 mm Cutting length: 50 mm Total length: 150 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.961 kg Special features Indexable insert milling cutter body Designed for BDMT 11T3 inserts Torx clamping with T8 key Suited to general milling operations FAQ What insert type does this cutter accept? The S572TM accepts BDMT 11T3 indexable inserts and is compatible with inserts from Kyocera when the correct insert grade and geometry are selected. Is the clamping screw type standardised? Yes — the cutter uses a Torx M2.5x5.5 fixing screw secured with a T8 key to ensure reproducible clamping and straightforward maintenance. What are the key dimensions to check for holder compatibility? Important dimensions for holder selection are the 32 mm shank diameter, 150 mm overall length and 50 mm effective cutting length; these determine fitment and operational reach. How many cutting edges are utilised per revolution? The tool body supports 4 cutting edges, providing balanced load distribution and improved chip control during milling. Can the S572TM be used for long-reach operations? With a 150 mm overall length the S572TM offers moderate reach; for deep or extended overhangs, assess rigidity and holder type before committing to longer cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid Ø25 mm shank and a generous 50 mm cutting length to maintain stable, repeatable machining; the compatibility with BDMT 11T3 indexable inserts ensures flexibility across insert grades. Order directly via Metav Werkzeuge or consult our specialists for process integration advice. Schaftfräser S569TM – Shank milling cutter for BDMT 11T3 indexable inserts, Ø25 mm, 3-edge The Schaftfräser S569TM is a shank milling cutter developed for secure, high-stability milling operations using BDMT 11T3 indexable inserts; suitable for shoulder and face milling where rigidity and fast insert changes are required Ø25 mm shank for rigid toolholding Compatible with BDMT 11T3 indexable inserts 50 mm cutting length for deeper cuts Torx clamping screw M2.5x5.5, key T8 High rigidity for consistent machining performance Equipped with an Ø25 mm shank, this solid shank cutter delivers improved stiffness at the toolholder interface, reducing vibration and improving surface finish on each pass. The combination of a rigid shank and a 90° cutting angle focuses cutting forces into a predictable vector, which helps maintain contour accuracy and extend insert life. For production environments where cycle-time consistency and component tolerances matter, the enhanced stability reduces rework and supports steady output. Flexible insert system that simplifies tooling logistics The tool accepts BDMT 11T3 indexable inserts, a widely used format that allows a quick change of cutting grades and geometries without replacing the body. Compatibility with Kyocera inserts expands grade options for different materials and cutting conditions, enabling a single cutter body to serve multiple process needs. This modularity lowers tool inventory complexity and helps optimise cost per part when grades are selected for wear resistance, toughness or finish. Secure clamping and straightforward maintenance Clamping is achieved with a Torx M2.5x5.5 screw tightened with a T8 key, a compact system that provides reliable insert retention while allowing fast exchange during shift changes. The simple screw-and-seat arrangement reduces downtime for insert replacement and inspection. Routine maintenance is kept minimal: timely torque checks and chip-clearing ensure repeatable seating and minimise the risk of insert rotation or misalignment under load. Designed for productive machining and adaptable applications With a 50 mm cutting length and an overall length of 150 mm, the cutter supports deeper engagement where necessary while preserving rigidity for shoulder milling and light profiling. The body features three cutting edges, balancing material removal rate and chip control for many workshop tasks. Weighing approximately 0.563 kg, the tool is easy to handle at set-up yet robust enough for demanding operations. These characteristics make it a practical choice for jobbing shops and production lines aiming to streamline tooling without sacrificing performance. Contact Metav Werkzeuge for tailored tooling recommendations or to request availability and technical details for the Teknik Makina S569TM shank milling cutter; direct assistance is available from our Emmerich team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S569TM Manufacturer: Teknik Makina Product name: Schaftfräser (shank milling cutter) Designation: for BDMT 11T3 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Cutting length (shaft): 50 mm Diameter: 25 mm Number of cutting edges: 3 Overall length: 150 mm Weight: 0.563 kg Cutting angle: 90° Special features Compatible inserts: BDMT 11T3 Compatible insert manufacturer: Kyocera Torx screw: M2.5x5.5 Torx key size: T8 Files: 62de7e57bd24461b3d5f7a2e, 62de7ee933927e49dbf32793 FAQ What insert format does the S569TM accept? The S569TM accepts BDMT 11T3 indexable inserts; this allows rapid insert changes and a broad selection of cutting grades. Which insert manufacturers are compatible? The cutter is compatible with inserts from Kyocera, enabling selection of grades for different materials and machining strategies. What are the key dimensions to check for toolholder compatibility? Check the Ø25 mm shank and the overall length of 150 mm to ensure the toolholder provides sufficient support and projection. How is the insert secured in the cutter head? Insert retention is via a Torx M2.5x5.5 clamping screw, tightened with a T8 key for secure seating and quick replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a robust combination of compatibility with ENMX 0604 indexable inserts, a 16 mm shank and a 150 mm overall length to maintain steady production and reduced downtime; order the tool body directly via Metav Werkzeuge or consult our technical advisors for application support. Shank milling cutter S106TM — for ENMX 0604 indexable inserts, 16 mm shank (Teknik Makina) Shank milling cutter S106TM designed as a modular milling body for use with ENMX 0604 indexable inserts; suited to retrofit into existing insert-based tool systems for efficient milling operations Compatible with ENMX 0604 indexable inserts 16 mm shank diameter for secure collet grip 150 mm overall length for extended reach Secured with M2.5x7 Torx screw (T8) Greater material removal with predictable cycle times The S106TM tool body delivers consistent chip formation and efficient cut removal thanks to its design for ENMX 0604 indexable inserts. By pairing an insert-based cutter body with a compact profile, the tool body supports predictable cycle times and repeatable results in multi-shift production. The combination of an insert system and a solid mounting interface permits quick insert changes, which reduces machine downtime and improves overall throughput while keeping process control straightforward. Secure clamping for improved runout and repeatability A 16 mm shank and secure fixing system reduce tool movement during machining, resulting in high repeatability and stable cutting conditions. The insert is retained by an M2.5x7 Torx screw tightened with a T8 key, which provides a compact and robust clamping method. Secure clamping minimises axial and radial play, so the tool body maintains concentricity and helps extend insert life through consistent cutting geometry rather than compensating for tool wobble. Extended reach with workshop-friendly geometry The cutter’s 150 mm overall length gives additional reach for operations in deeper pockets or on larger components while keeping a compact toolholder footprint. This geometry supports access to recessed features without resorting to excessively long, flexible tooling that compromises stiffness. The 2‑edge configuration reduces cutting forces per edge while preserving throughput, so the design balances reach with machining stability for practical workshop use. Fast maintenance and straightforward system integration Designed for systems using ENMX 0604 inserts and compatible with YG‑1‑type plates, the tool body simplifies spare-part planning and inventory management. Insert replacement requires only the specified Torx screw and key, enabling quick interventions at the machine without specialised equipment. The modular nature of the cutter body supports rapid integration into existing tool tables and helps maintain steady production with a low learning curve for operators. Contact Metav Werkzeuge for precise application advice on the Teknik Cutting Tools S106TM shank milling cutter and to confirm insert availability or fitment at Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S106TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Article description: Shank milling cutter for ENMX 0604 indexable inserts ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 16 mm Cutting diameter: 16 mm Overall length: 150 mm Number of cutting edges: 2 Torx screw: M2.5x7 Torx key: T8 Special features Compatible with ENMX 0604 indexable inserts Compatible insert manufacturer: YG‑1 Secure clamping via M2.5x7 Torx screw Brand: Teknik Cutting Tools (Teknik Makina) FAQ Which insert type does this cutter body accept? The S106TM accepts ENMX 0604 indexable inserts and is specified for use with plates following that format; compatibility with YG‑1 inserts is indicated. What are the shank and overall dimensions? The shank diameter is 16 mm and the overall length is 150 mm, providing a compact yet extended‑reach tool body. How many cutting edges are fitted on the tool body? The tool body is designed for 2 cutting edges when equipped with the appropriate ENMX 0604 inserts. Which screw and key are required for insert clamping? Insert retention uses an M2.5x7 Torx screw tightened with a T8 key for secure and compact fixation. Can the S106TM be used with standard 16 mm toolholders? Yes, the S106TM’s 16 mm shank is intended to fit standard 16 mm toolholders and collet systems that accept a 16 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 20 mm shank stability, 150 mm overall length and compatibility with standard LNMU 0303 indexable inserts for efficient, repeatable milling. Order the tool via Metav Werkzeuge or contact their consultants for application advice and reliable supply from Emmerich. Shaft Cutter S673TM — Ø20 mm shank, 150 mm overall length, for LNMU 0303 indexable inserts (Teknik Makina) The Shaft Cutter S673TM is a compact milling tool designed for industrial CNC and workshop applications using LNMU 0303 indexable inserts. For LNMU 0303 indexable inserts 20 mm shank diameter, 150 mm overall length Secure Torx clamping screw M2.5x7, T8 key Greater process stability through optimised shank and geometry The tool delivers consistent machining thanks to a 20 mm shank and a 150 mm overall length, which together reduce vibration and improve concentricity. With three cutting edges, the design balances material removal rate and tool life, providing a measurable improvement in cycle stability. For operations where repeatable tolerances matter, the combination of shank diameter and cutting geometry gives a stiffer clamping interface and smoother surface finish, helping to lower rework rates and increase throughput. Quick insert changes and secure clamping reduce downtime The cutter uses LNMU 0303 indexable inserts and a Torx M2.5x7 clamping screw tightened with a T8 key, enabling fast, secure insert replacement. Indexable inserts allow economical management of cutting edges: worn inserts are replaced instead of the entire tool body, which reduces inventory costs and simplifies maintenance. Compatibility with TNGLY-OKE inserts ensures access to established grades and geometries for different materials, supporting rapid set-up and shorter machine idle times. Built for everyday workshop and CNC reliability Designed by Teknik Makina, the tool supports stable milling in common industrial scenarios where durability and predictable performance are required. The use of indexable geometry means the tool can be specified for different workpiece materials via insert choice, rather than the cutter body alone. This approach provides a pragmatic balance between flexibility and cost-efficiency: select the appropriate insert grade for aluminium, steel or tougher alloys to achieve the desired trade-off between cutting speed and tool life while maintaining operational continuity. For tailored advice on integrating the S673TM into production flows or selecting matching inserts, contact Metav Werkzeuge for expert support and dependable delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S673TM Name: Shaft cutter for LNMU 0303 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 150 mm Cutting edges: 3 Shank diameter: 20 mm Torx screw: M2.5x7 Torx key size: T8 eCl@ss: 21180806 ETIM: EC011860 Special features For LNMU 0303 indexable inserts Compatible with TNGLY-OKE inserts Secure Torx clamping system Designed for CNC and workshop use FAQ Which inserts fit this cutter? The cutter is specified for LNMU 0303 indexable inserts and is compatible with TNGLY-OKE insert variants, enabling selection of grading and geometry for various materials. How is the insert secured? Inserts are clamped with a Torx screw M2.5x7, using a T8 key for secure, repeatable fixation and quick replacement. Is the shank suitable for standard collets? The 20 mm shank diameter is a standard size for many toolholders and collets; compatibility should be confirmed with the machine’s clamping system. What are the main benefits of using indexable inserts with this tool? Indexable inserts allow rapid edge changes, lower tooling costs and flexibility to adapt cutting grades for different workpiece materials without replacing the cutter body. Can this cutter be used for high-feed finishing? The three-edge geometry provides a balance between material removal and surface finish; selection of insert grade and cutting parameters determines suitability for finishing passes. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com