Gibt es einen Hahn und Kolb Online Shop?

Take advantage of compact dimensions, stable clamping and a 95° cutting angle for consistent external turning results; order the SCLCL 1616 toolholder via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter SCLC for CCMT Indexable Inserts — Teknik Cutting Tools SCLCL 1616, left‑hand, 95° The Klemmhalter SCLC for CCMT Indexable Inserts is a left‑hand clamping toolholder designed for external turning with CC-- 09T3 / CCMT indexable inserts in CNC and manual lathes Left‑hand turning orientation SCLCL 1616 shank, 16 x 16 mm Compatible with CC-- 09T3 CCMT inserts Consistent seating for repeatable cuts A reliably engineered clamping seat delivers repeatable results even in batch production. The SCLCL 1616 geometry ensures accurate insert positioning so that each cut starts from the same datum; this reduces set‑up time and minimises rework. With a defined 95° cutting angle, the holder is optimised for standard external turning profiles, supporting predictable chip flow and steady surface finish. Emphasis on rigid contact surfaces helps maintain precision across multiple tool changes. Rapid replacement and clear compatibility Designed specifically for CCMT style indexable inserts (designation CC-- 09T3), the holder simplifies insert exchange without compromising clamping integrity. The shank 16 x 16 mm profile (ISO SCLCL 1616) and the declared cutting height 20 mm match common toolpost systems, enabling direct replacement in many setups. The modest total length 100 mm and a weight of 0.215 kg keep centrifugal loads low on rotating assemblies while preserving rigidity during higher feed operations. Compact design that fits standard toolposts A compact head width of 20 mm and overall width of 16 mm make this clamping holder suitable where space is limited or multiple stations are required on a turret. The left‑hand orientation is ideal for operations that require reverse‑direction turning or when arranging tool stations for optimal chip evacuation. The combination of compactness and the 95° approach angle supports both light finishing cuts and more robust profiling, depending on insert grade and machine capabilities. Reliable sourcing and practical service Manufactured by Teknik Cutting Tools and distributed by Metav Werkzeuge, this toolholder benefits from a European supply chain focused on dependable delivery and technical guidance. The robust ISO‑based design reduces uncertainty at procurement and supports standardisation across a machine park. For enquiries about fitting, insert grades or suitability for a specific turning task, Metav’s consultants can provide targeted recommendations based on workshop requirements and production goals. For tailored advice or to procure the Teknik Cutting Tools SCLCL 1616 clamping holder, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and lead times from Emmerich. Technical data Article number: D406TM Manufacturer: Teknik Cutting Tools Product name: Klemmhalter SCLC for CCMT Indexable Inserts ISO designation: SCLCL 1616 Core dimensions Height: 16 mm Width: 16 mm Head width: 20 mm Cutting height: 20 mm Total length: 100 mm Weight: 0.215 kg Cutting angle: 95° Compatibility & features For CC-- 09T3 / CCMT inserts ISO type SCLCL 1616 Shank designation H09 Left‑hand cutting direction FAQ Which inserts fit this toolholder? The toolholder accepts CC-- 09T3 format inserts (CCMT indexable inserts); the SCLCL 1616 interface is matched to that insert family for secure clamping. Is this a left‑hand or right‑hand holder? This model is a left‑hand turning toolholder; the SCLCL 1616 geometry and approach angle are configured for left‑hand external turning operations. What are the main dimensions to check for machine compatibility? Key dimensions are the shank/profile 16 x 16 mm, head width 20 mm, cutting height 20 mm and total length 100 mm; confirm these against the turret or toolpost envelope. Can this holder be used for finishing and roughing? The holder’s rigid design and 95° cutting angle allow both finishing and moderate roughing when paired with the correct CCMT insert grade and appropriate cutting parameters. Who manufactures and distributes the product? The clamping holder is manufactured by Teknik Cutting Tools and offered via Metav Werkzeuge; see the manufacturer details below for full contact information. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, compact and precise: the combination of a 16 mm shank, 88 mm overall length and a secure clamping design ensures clean parting and reliable grooving in confined set-ups; order the mini parting toolholder directly via Metav Werkzeuge or consult our specialists for tailored advice. Mini parting toolholder D16 d06 L88 – compact 16 mm shank, 88 mm overall length by Teknik Makina The mini parting toolholder D16 d06 L88 is a compact clamping holder engineered for precision grooving and parting operations on small lathes and confined workspaces. Compact 16 mm shank for small lathes 88 mm overall length for tight set-ups Robust clamping for stable tool holding Engineered for confined turning and grooving The compact design centres on a 16 mm shank and an 88 mm overall length, making this toolholder ideal where space is limited. As a mini clamping solution, it enables precise positioning of cutting inserts close to the workpiece, reducing unsupported overhang and lowering the risk of chatter. Reduced overhang directly improves cut stability and increases insert life, which in turn enhances throughput and reduces scrap rates in small-batch production. Secure clamping to improve surface quality and repeatability A focused clamping mechanism provides secure clamping and consistent axial support for parting and grooving inserts, translating into repeatable cut depths and better surface finishes. By stabilising the insert, the holder minimises vibration during engagement; this leads to fewer tool changes and predictable cycle times. For workshops aiming to raise first-pass yield, the emphasis on stability is a measurable gain in both efficiency and cost control. Fast integration and straightforward tool changes for busy shops The short overall length and standard shank diameter allow quick exchange between toolposts and collets commonly found on compact lathes. The holder’s geometry supports simple set-up routines and predictable tool offsets, shortening machine downtime during changeovers. In practice, this means faster job completion in constrained production cells and an easier workflow for technicians handling a variety of parting widths and depths. Reliable component for repetitive production demands Manufactured by Teknik Makina and listed as SKU DC332TM, this mini parting toolholder is built for repeated use in demanding environments. The emphasis on mechanical rigidity and consistent clamp force contributes to dependable long-term performance, supporting continuous operations without frequent readjustment. Regular inspection of the clamping faces and torque checks will preserve accuracy and extend service life. For purchasing advice or to order the Teknik Makina mini parting toolholder directly from Metav Werkzeuge, contact Metav Werkzeuge’s specialists for tailored recommendations and delivery from our Emmerich stock — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930. Technical Data SKU: DC332TM Product: Mini parting toolholder Model designation: D16 d06 L88 Manufacturer: Teknik Makina ECLASS: 21181005 Facts Shank diameter: 16 mm Overall length: 88 mm Special features Label: 16mm Mini parting toolholder L88mm Product type: Mini parting toolholder Category: Machining (Zerspanen) FAQ What shank diameter does the holder require? The holder accepts a 16 mm shank and is specified for compact toolposts suitable for small lathe installations. Is the holder suitable for standard parting inserts? Yes; the mini parting toolholder (Teknik Makina, SKU DC332TM) is designed to accommodate common parting and grooving inserts used in compact turning operations. How does the short overall length benefit workshop setup? A shorter overall length reduces unsupported tool overhang, improving stability and enabling operations in tight fixtures typical of small-batch production. Can the holder help reduce insert wear? By providing secure clamping and reduced vibration, the holder contributes to longer insert life and more consistent surface finishes. Is extensive modification required to fit most small lathes? No major modification is normally necessary; the compact shank and standard geometry allow straightforward integration with common clamps and toolposts. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of compact, reliable clamping with the combination of a 16 mm clamping diameter and an M6 thread for secure mounting; the holder’s 88 mm overall length and light weight support stable, low-inertia turning operations. Order the holder directly via Metav Werkzeuge or contact our consultants for compatibility advice. Mini parting clamp holder — compact parting and grooving toolholder by Teknik Makina, M6 thread & 16 mm diameter The Mini parting clamp holder is a compact toolholder for light parting and grooving on small lathes and bar-machining setups, designed to deliver stable clamping in restricted spaces Compact 88 mm overall length 16 mm clamping diameter M6 thread interface Lightweight 0.169 kg Precise clamping for fine turning and grooving The holder offers precise clamping for small turning and grooving tasks by combining a 16 mm clamping diameter with a secure M6 thread interface. The clamping diameter describes the part of the holder that supports and centres the cutting blade or small tool shank, so the result is reduced chatter and improved surface finish compared with undersized supports. The integrated 4 mm mounting bore enables compatibility with many compact tool posts and adapters; the nominal values translate directly into reliable repeatability at the tool tip and predictable cutting behaviour in short-reach operations. Compact form factor for constrained machine setups The compact 88 mm overall length and a mass of 0.169 kg keep rotating and static moments low, which helps to preserve tool life and reduce vibration in light-duty turning. The reduced length allows installation in close-quarter tool stations and bar-feeding applications where reach and clearance are limited. Lightweight construction contributes to quicker tool indexing and less load on quick-change systems, while the combination of the 4 mm mounting bore and the M6 thread provides straightforward mechanical interface options for existing fixtures and clamping adapters. Fast setup, consistent results and trusted provenance Assembly and adjustment are intentionally simple: the M6 thread secures the holder to the mounting point, and the clamping face delivers a firm seat for small parting blades or grooving implements, shortening setup times and increasing process uptime. The design focuses on function — compact dimensions, predictable geometry and low mass — to support efficient production in workshops and small-batch environments. Manufactured by Teknik Makina and identified as DC314TM, the component meets expectations for a dependable workshop-grade toolholder; combined with Metav’s distribution and service, it forms part of a supply chain that balances accessibility and consistent quality. Contact Metav Werkzeuge to check fitment for specific lathes or to request technical drawings for the Teknik Makina Mini parting clamp holder DC314TM — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice Technical data Article number: DC314TM Name: Mini parting clamp holder Brand: Teknik Makina Facts Clamping diameter: 16 mm Mounting bore: 4 mm Thread: M6 Overall length: 88 mm Weight: 0.169 kg Special features Compact design for restricted tool stations Suitable for small parting and grooving jobs Low mass for reduced inertia Robust M6 threaded mounting FAQ What applications suit this mini clamping holder? The mini parting clamp holder DC314TM is suitable for light parting and grooving on small lathes and bar-work machines where compact reach and stable clamping are required. Which mounting interfaces are supported? The holder features a 4 mm mounting bore and an M6 thread, allowing attachment to common compact tool posts and adapters designed for small turning operations. Is the holder compatible with standard parting blades? Yes; the 16 mm clamping diameter provides a stable seat for narrow parting blades and grooving tools typically used in fine turning, provided blade geometry matches the holder’s clamping face. How does the design reduce vibration during cutting? Short overall length (88 mm) and a low weight (0.169 kg) reduce leverage and dynamic forces at the tool tip, which helps to lower vibration and improve surface finish in short-reach operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact holder that combines precise parting action with secure clamping: its 8 mm shank and M6 clamping thread deliver stable tool engagement in confined setups. Order directly via Metav Werkzeuge or consult our specialists for application advice. Mini parting clamp holder DC344TM – compact clamping holder with 16 mm diameter, M6 thread (Teknik Makina) The Mini parting clamp holder DC344TM is a compact clamping solution designed for fine parting and grooving tasks where space and repeatability matter Compact 88 mm overall length 16 mm effective cutting diameter 8 mm shank for standard tool posts M6 thread for secure clamping Precise clamping for reliable parting performance The primary advantage of this clamping holder is its consistent clamping stability, achieved via the integrated M6 thread and precisely machined seating. A firm clamped tool reduces unwanted vibration during a cut, which directly improves surface finish and repeatability. The short, rigid geometry is especially beneficial in operations that demand accurate engagement over a short cutting span; this means fewer rejects and less rework for small-batch production. The holder’s design prioritises mechanical integrity so that the cutting action remains dependable under normal workshop loads. Space-saving design that simplifies setup and changeover With an overall length of 88 mm and an effective diameter of 16 mm, the holder offers a compact footprint that is easy to position in confined tool posts. The 8 mm shank dimension allows straightforward insertion into many standard clamping systems, shortening setup time and lowering handling complexity. Its low mass (0.142 kg) contributes to reduced inertia, helping to maintain positional stability when making short, controlled cuts. For workshops aiming to streamline tool changes and improve process throughput, the combination of compact size and compatible shank interface provides a practical efficiency gain. Robust integration into existing benches and tooling systems Manufactured by Teknik Cutting Tools and distributed through Metav Werkzeuge, the holder is intended for quick integration with common lathe tool posts and clamping fixtures. The mechanical interface—shank diameter and clamping thread—was selected to match established workshop standards, enabling reliable fitment without the need for extensive adapter work. Where a compact, repeatable parting action is required, this holder contributes to a predictable machining sequence and measurable process stability. Its straightforward mechanical design keeps maintenance simple and supports long-term workshop reliability. For detailed compatibility checks or to order Teknik Cutting Tools’ DC344TM through Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to receive expert guidance and procurement support Technical data Article number: DC344TM Manufacturer: Teknik Makina Product name: Mini parting clamp holder Facts Overall length: 88 mm Diameter: 16 mm Shank diameter: 8 mm Thread: M6 Weight: 0.142 kg Special features Compact design Secure M6 clamping interface Suited to precision parting and grooving FAQ What is the shank diameter of this clamping holder? The shank diameter is 8 mm for the Mini parting clamp holder DC344TM, providing compatibility with many standard tool posts. Which thread is used for clamping the tool? Clamping is secured via an M6 thread on the Teknik Cutting Tools DC344TM mini holder for reliable retention. What is the overall length and cutting diameter? Overall length is 88 mm and the effective cutting diameter is 16 mm for the DC344TM mini parting clamp holder. Is this holder suitable for compact lathe setups? Yes, the compact 88 mm length and low weight of 0.142 kg make the DC344TM well suited to confined lathe tool posts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact 16 mm shank and 88 mm overall length to achieve precise parting and grooving in confined setups; the combination of a small footprint and secure clamping supports steady, repeatable results on space-restricted lathes. Order the Mini parting tool holder directly via Metav Werkzeuge or consult our specialists for compatibility details. Mini parting tool holder DC338TM – 16 mm, L88 (Teknik Makina) The Mini parting tool holder DC338TM is a compact clamping solution engineered for precision parting and grooving in restricted toolpost arrangements and small lathes. Compact design for confined toolposts 16 mm shank diameter for standard toolholders 88 mm overall length for close-proximity turning Secure clamping for repeatable parting operations Precision where space is limited The 16 mm shank and short overall length of this mini holder make it particularly suitable for operations that demand access to narrow or recessed workpieces. A smaller shank reduces the swing envelope and allows the cutting edge to be positioned closer to the component without sacrificing rigidity. For shops facing layout constraints, this compact geometry helps maintain repeatable accuracy while minimising tool interference and the need for fixture modifications. Dependable clamping for consistent production A stable clamping concept is essential for reliable parting performance. The holder’s design focuses on secure clamping, which reduces micro-movements during cutting and therefore diminishes the risk of tool vibration and premature wear. This stability translates directly into fewer rejects and lower rework rates, supporting efficient small-batch and series production where consistent results per cycle are a priority. Integrates into compact workflows for time savings Designed for ease of integration into existing setups, the small form factor supports fast tool indexing and keeps changeover times to a minimum. The reduced bulk of the holder helps operators access tight areas and makes tool management more straightforward across successive operations. Combined with a methodical setup, this results in improved throughput and smoother production flow for precision turning and grooving tasks. Contact Metav Werkzeuge to check compatibility of the Teknik Makina DC338TM mini parting tool holder (16 mm shank, 88 mm length) with current toolposts and to arrange procurement directly from our Emmerich warehouse. Technical data Article number: DC338TM Label: 16 mm mini parting tool holder L88 mm Manufacturer: Teknik Makina Key dimensions Shank diameter: 16 mm Overall length: 88 mm ECLASS: 21181005 Design and features Mini parting tool holder design Compact footprint for restricted toolposts Secure clamping for repeatable operations FAQ What is the shank diameter of this holder? The shank diameter is 16 mm for the Mini parting tool holder DC338TM by Teknik Makina. What is the overall length of the tool holder? Overall length is 88 mm for the Teknik Makina DC338TM mini holder. Is the holder intended for parting and grooving operations? Yes. The DC338TM is designed specifically for precision parting and grooving in confined setups. Can this holder improve repeatability in small-batch production? Its compact design and secure clamping support repeatable accuracy and reduced rework in small-batch workflows. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of compact design and secure clamping: the combination of a 75 mm overall length, a 16 mm tool capacity and an M6 clamping thread delivers precise parting and grooving in confined setups. Order directly via Metav Werkzeuge or consult the Metav team for integration advice. Mini parting tool clamp holder DC322TM — Compact clamp for parting and grooving, M6 thread, ø16 mm capacity (Teknik Makina) The Mini parting tool clamp holder is a compact clamping solution for precision parting and grooving on small lathes and turning centres, designed to secure short tools where space is limited. Compact 75 mm overall length Holds ø16 mm tool diameter M6 thread for secure clamping Mounting bore ø5 mm for small setups Precise clamping for repeatable parting and grooving The Mini parting tool clamp holder DC322TM is engineered to deliver stable, repeatable clamping in small-scale turning operations. Fitted with an M6 thread, the clamp secures the cutting tool with a reliable metric fixing that is common in workshop tooling, while the ø16 mm capacity accommodates many standard parting and grooving tool shanks. Because the holder locates on a ø5 mm mounting bore, it integrates with compact tool posts and small fixtures without additional adapters. The result is reduced micro-movement at the cutting edge, which directly improves surface finish and extends tool life in precision work. Compact footprint that fits tight setups and retrofit tasks With an overall length of 75 mm and a weight of only 0.135 kg, this clamp is suited for confined tool positions and retrofitting on smaller machines. The compact design minimises overhang and helps maintain rigidity even when working close to chucks or within confined tooling turrets. In practice, shorter overhang and lower mass reduce vibration and deflection during cut-off operations, supporting more consistent parting depths and cleaner grooves. For workshops focused on small-batch production or prototyping, the space-saving profile allows more flexible tool layouts without compromising clamping security. Operational benefits and where it performs best Designed by Teknik Makina for light to medium-duty parting tasks, the clamp holder is ideal where a small, dependable fixture is required. The straightforward metric thread and defined diameters make setup quick and predictable; the compact clamp suits applications such as model work, watchmaking components, surgical instrument pre-machining and other precision turning jobs. For equipment planners and workshop managers, the clear specification—M6 thread, ø16 mm tool capacity, ø5 mm mounting, 75 mm length—enables precise integration decisions and predictable performance in constrained environments. Contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines and to arrange supply from Emmerich Technical Data Article number: DC322TM Manufacturer: Teknik Makina SKU: DC322TM Facts Overall length: 75 mm Tool diameter capacity: ø16 mm Mounting diameter: ø5 mm Thread: M6 Weight: 0.135 kg Special features Mini clamping holder Compact design for tight setups Secure M6 clamping Designed for parting and grooving FAQ What tool shank diameter does this holder accept? The holder accepts tool shanks up to ø16 mm, as specified for the Mini parting tool clamp holder DC322TM. What is the required mounting bore? Mounting is on a ø5 mm bore; the clamp is designed to fit small tool posts and compact fixtures. Which thread type secures the tool? Clamping is effected via an M6 thread, providing a metric, workshop-standard fixing for secure retention. Is this clamp suitable for small lathes and turrets? Yes, the compact 75 mm length and lightweight 0.135 kg construction make the clamp suitable for small lathes and constrained turret positions. Who manufactures this clamp and what is the SKU? The clamp is manufactured by Teknik Makina and sold as the Mini parting tool clamp holder, SKU DC322TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a compact 93 mm overall length, a 16 mm shank and compatibility with D09 indexable inserts for reliable parting and grooving in confined toolpost spaces; order directly via Metav Werkzeuge or consult their specialists for integration advice. Mini parting tool clamping holder — compact 16 mm shank, for D09 indexable inserts (Teknik Makina) The Mini parting tool clamping holder is a compact clamping solution for precision parting and grooving on lathes and turning centres. Compact 93 mm overall length 16 mm shank for standard toolposts Compatible with D09 indexable inserts Space-saving build that keeps setups stable The compact format with a 93 mm overall length and a 16 mm shank is designed for workshops where toolpost clearance is limited. The reduced overhang contributes to greater rigidity, which in turn lowers the tendency for chatter during parting operations. For machinists seeking a tidy setup, the short footprint of this clamping solution makes tight fixtures practical while maintaining an accurate cut profile. The holder’s lightweight construction (approx. 0.102 kg) further minimises dynamic load on the toolpost and simplifies handling during changeovers, supporting a steady machining process without complex adjustments. Efficient parting with indexable inserts and defined cutting geometry Engineered for use with D09 indexable inserts, the holder accepts standard insert formats to keep tooling costs manageable and changeovers rapid. The 20 mm cutting height and nominal 9 mm cutting diameter offer a clear guideline for selecting inserts and setting the tool height, aiding repeatable alignment across batches. Using indexable inserts reduces downtime compared with brazed tools and provides a predictable wear cycle that simplifies maintenance scheduling. The holder’s ISO shank designation S16 aligns with common toolpost adaptors, making it straightforward to integrate into existing lathe tooling systems. Professional sourcing and workshop continuity Supplied by Teknik Makina and available through Metav Werkzeuge, this clamping solution is intended for professional use in industrial and craft workshops where reliability and predictable supply matter. The combination of a standard shank, defined insert compatibility and compact geometry supports quick replacement and consistent part quality in serial turning. Metav’s distribution model emphasises dependable fulfilment from its Emmerich hub, reducing procurement complexity for workshops that require a broad but reliable range of tooling. For specific technical integration questions, the Metav team can advise on compatibility with existing toolposts and insert grades. Contact Metav Werkzeuge today to request detailed technical guidance on the Teknik Makina mini parting tool clamping holder (SKU K812TM) and to arrange prompt delivery or expert consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K812TM Manufacturer: Teknik Cutting Tools Designation: Mini parting tool clamping holder Brand: Teknik Makina Data Shank diameter: 16 mm Cutting height: 20 mm Cutting diameter: 9 mm Overall length: 93 mm Weight: 0.102 kg Shank designation (ISO): S16 Holder designation: D09 K20 L093 Special features For indexable inserts D09 Compact mini design for restricted toolposts Lightweight construction for reduced dynamic load FAQ What insert type is compatible with this holder? The holder is designed for D09 indexable inserts, enabling fast index changes and cost-effective wear management for parting tasks. Which shank size fits the toolpost? The clamping holder uses a 16 mm shank (ISO designation S16), suitable for standard adaptors and compact toolposts. What are the key dimensions to consider for setup? Important dimensions include the 93 mm overall length, 20 mm cutting height and 9 mm cutting diameter, which guide tool height setting and clearance planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact design and secure clamping for efficient steel turning operations; the combination of a 16 mm diameter shank, an M6 fastening thread and long service life supports continuous production. Order the part directly via Metav Werkzeuge or consult the technical team for application guidance. Mini parting clamp holder DC304TM — compact 16 mm shank, 88 mm overall length (Teknik Makina) The Mini parting clamp holder is a compact turning accessory for secure clamping of indexable inserts in precision steel machining applications Compact 16 mm shank for tight setups Secure clamp for indexable inserts M6 fastening thread for stable assembly Lightweight 0.134 kg reduces holder inertia Space-saving design that maintains cutting stability The compact geometry delivers access into confined tool positions while maintaining stable clamping during parting and grooving tasks. With a 16 mm shank and an 88 mm overall length, the holder is designed to reach narrow areas without compromising rigidity. The combination of small footprint and robust form reduces vibration and supports consistent chip formation, which in turn contributes to higher process reliability and predictable cycle times. Reliable clamping for indexable inserts and durable performance Designed for use with indexable inserts, the clamp mechanism secures the cutting edge with consistent force, helping to prolong insert life and reduce unplanned tool changes. Built for high-class steel machining, the toolholder's geometry aims to transfer cutting forces efficiently so that wear is reduced and tool life is extended. The result is measurable productivity gains through fewer interruptions and a steadier surface finish. Easy integration and low-mass handling for better machine dynamics With a weight of 0.134 kg and an M6 thread for attachment, the holder integrates easily into existing turning toolposts and modular tool systems. The low mass reduces holder inertia, improving acceleration and deceleration behaviour during short-cut cycles. For complex applications or material-specific settings, application advice is available from Metav Werkzeuge consultants to ensure the component meets process requirements and set-up preferences. Secure reliable clamping performance from Teknik Makina — contact Metav Werkzeuge in Emmerich for technical consultation or to request delivery details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DC304TM Manufacturer: Teknik Makina Weight: 0.134 kg Facts Diameter: 16 mm Overall length: 88 mm Clamping bore: 3 mm Thread: M6 Special features For indexable inserts Suitable for high-class steel machining Compact design for tight set-ups Long service life FAQ Which insert types are compatible with this holder? The holder DC304TM by Teknik Makina is intended for use with standard indexable inserts designed for parting and grooving applications; insert seat geometry should be checked against the intended insert family. What are the key dimensions to consider when fitting the holder? Important dimensions include the 16 mm diameter shank, the 88 mm overall length, and the M6 fastening thread; these determine fitment and reach in the toolpost. Is the holder suitable for heavy steel machining? The design is specified for high-class steel machining and offers stable clamping to support demanding parting operations while promoting insert life. How does the holder affect machine dynamics? With a low mass of 0.134 kg, the holder minimises added inertia, improving the machine’s responsiveness during short cycles and frequent tool movements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure precise parting operations with a compact combination of M6 thread clamping and a slender 88 mm overall length; the lightweight design supports fast setup and reduced overhang. Order the Mini parting clamp holder directly via Metav Werkzeuge or ask our consultants for specification advice. Teknik Makina Mini parting clamp holder — compact 88 mm, M6 thread Mini parting clamp holder designed for compact turning and parting tool clamping in restricted setups Compact 88 mm overall length M6 threaded clamp for secure fixing Compatible with 10 mm shank diameter Lightweight at 0.13 kg Precision clamping for compact turning and parting The holder is engineered as a compact clamping solution for parting and grooving applications where machine space is limited. With an 88 mm overall length and a 10 mm shank interface, the design reduces tool overhang and improves rigidity at the cutting point. The M6 thread provides a direct, mechanically robust clamping method that secures the cutting insert or toolholder with minimal play. By converting technical specifications into practical benefits, the result is a measurable increase in stability and consistent cutting performance for short-reach operations. Fast fitting and consistent performance Installation and adjustment are straightforward thanks to the standard M6 thread, which allows rapid tightening with commonly available tooling. The compact geometry and lightweight construction mean less inertia and a lower tendency to excite vibration during parting cuts. This leads to improved surface quality and fewer rework cycles in batch production or prototype turning. The simple mechanical clamping principle is explained clearly for engineers and workshop technicians who need reliable, repeatable setup without complex calibration procedures. Small footprint, big workshop value A small clamp holder such as this one makes inventory and fixture planning easier: it occupies little space on the toolpost and is well suited to machines with limited turret clearance. The reduced mass and compact form support shorter setup times and a neater tooling arrangement, which can contribute to smoother workflow on the shop floor. For workshops seeking to streamline tooling ranges while maintaining dependable parting capability, this compact clamp holder represents a practical choice from Teknik Makina, combining functional simplicity with solid mechanical design. Contact Metav Werkzeuge for tailored advice on the Teknik Makina Mini parting clamp holder (DC350TM) and to confirm compatibility with existing toolholders — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DC350TM Name: Mini parting clamp holder Manufacturer: Teknik Makina Numerical data Overall length: 88 mm Shank / tool interface diameter: 10 mm Tool diameter: 16 mm Thread: M6 Weight: 0.13 kg Special features Compact clamp holder for parting/grooving M6 threaded clamping for secure fixing Lightweight design for reduced overhang Suitable for compact toolpost arrangements FAQ What is the manufacturer and SKU for this clamp holder? The Mini parting clamp holder is supplied by Teknik Makina and referenced as SKU DC350TM in our system. Which key dimensions define suitability for tight setups? The defining measures are an 88 mm overall length, a 10 mm shank interface, a 16 mm tool diameter, and an M6 thread, combined with a weight of 0.13 kg. How does the M6 thread affect clamping reliability? The M6 threaded clamp supplies a direct mechanical connection that ensures secure clamping and minimal movement of the cutting tool during parting, improving repeatability. Is this holder appropriate where vibration control is a concern? The compact form and lightweight construction reduce overhang and inertial forces, which helps to lower the tendency for chatter in short-reach parting operations. Which workshop applications suit this clamp holder best? The holder is intended for compact turning and parting set-ups where space is limited and robust, repeatable clamping is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from secure clamping and internal coolant for consistent left-hand turning performance; the compact 16 × 16 mm shank and 100 mm overall length support repeatable setups in production. Order directly via Metav Werkzeuge or consult our team for application advice. Klemmhalter SVJB for VBMT Indexable Inserts – internal coolant, 16 × 16 mm – Teknik Makina A sturdy SVJB for VBMT Indexable Inserts clamping holder engineered for left-hand turning operations, offering through-coolant capability and precise insert retention for industrial and workshop turning tasks. Secure clamping for VBMT 1103 inserts Internal coolant supply for enhanced cooling Compact 16 × 16 mm shank, 100 mm length Left-hand cutting orientation with 93° angle Precise insert retention for predictable results The clamping system delivers a stable and reproducible hold for VBMT 1103 indexable inserts, reducing vibration and enabling consistent cutting geometry across batches. Thanks to the robust clamp design and the SVJBL 1616 ISO designation, set-up times are shortened and tool runout is minimised, which supports repeatable surface finishes and dimensional accuracy on turned parts. This stability is particularly valuable in serial production and small-series machining where process reproducibility is crucial. Through-coolant design reduces heat and improves chip control Integrated internal coolant channels feed cutting fluid directly to the cutting zone, promoting effective heat dissipation and improved chip evacuation. The holder uses a M2.5x6.5 Torx screw secured with a T8 key, ensuring reliable fixation while allowing straightforward maintenance. The coolant feed and secure screw arrangement contribute to longer insert life and fewer unplanned tool changes, translating into higher machine uptime and lower tooling consumption per part. Compact dimensions for flexible machine integration With a 16 × 16 mm shank, 100 mm overall length and a total height of 16 mm, this clamping holder fits compact tool turrets and live housings without compromising rigidity. The cutting head width of 20 mm and a cutting height specified at 35 mm provide a practical working envelope for standard turning applications, while the 93° cutting angle and left-hand orientation make the product suitable for conventional left-hand turning cycles. The unit’s weight of 0.17 kg facilitates predictable balance and minimal inertial influence on rapid tool changes. Suitable for shop floors and industrial settings Designed for mechanics, maintenance workshops and production environments, the holder supports straightforward insert exchange and is compatible with common turret systems when the H11-IK clamping bar is employed. The combination of compact size, coolant capability and standard fastening means operators benefit from efficient cycle times and reduced thermal distortion during medium-duty to heavy finishing cuts. The tool is a practical choice where reliable left-hand turning and process stability are priorities. For reliable left-hand turning operations with Teknik Makina clamping holders, contact Metav Werkzeuge for supply and expert application guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AP552TM Manufacturer: Teknik Makina Designation EN: SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1616 Compatible inserts: VBMT 1103 Facts Shank width: 16 mm Total height: 16 mm Cutting-head width: 20 mm Cutting height: 35 mm Overall length: 100 mm Weight: 0.17 kg Cutting angle: 93° Special features Internal coolant Torx screw: M2.5x6.5 Torx key: T8 Clamping bar designation: H11-IK Left-hand cutting direction FAQ Which insert sizes are compatible with this clamping holder? The clamping holder is specified for VBMT 1103 inserts and is designed to secure those indexable inserts reliably in a left-hand turning configuration. Is coolant supply integrated in the holder? Yes, the holder features internal coolant, which directs cutting fluid to the tool tip to improve cooling and chip evacuation during machining. What are the critical dimensions for machine compatibility? Key dimensions include a 16 × 16 mm shank and 100 mm overall length; these values help determine whether the holder fits a given turret or tool post. How is the insert fastened and which tools are required for maintenance? Insert clamping uses a Torx screw M2.5x6.5, which is tightened or released with a T8 Torx key for secure and repeatable fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO‑specified clamping solution that secures VBMT 1103 indexable inserts with stable right‑hand geometry and a compact 16 x 16 mm shank for improved accessibility and repeatable set‑up; order the tool directly via Metav Werkzeuge or consult our sales engineers for integration advice. SVJB clamping holder (SVJBR 1616) – right‑hand toolholder for VBMT 1103, 100 mm by Teknik Makina SVJB clamping holder for turning applications, designed to accept VBMT 1103 indexable inserts for external right‑hand machining Precision clamping for VBMT 1103 inserts Right‑hand cutting, 93° cutting angle Shank 16 x 16 mm, overall length 100 mm Compatible with H11 toolholders Compact design for stable turning and improved access The compact dimensions deliver measurable benefits for constrained setups: a 16 x 16 mm shank combined with an overall length of 100 mm minimises overhang while the head width of 20 mm and a cutting height of 25 mm ensure the insert sits in a predictable, rigid position. Reduced projection from the spindle lowers vibration and improves surface finish; the tool’s low mass of 0.192 kg contributes to quick acceleration and stable dynamics during interrupted cuts. These tangible characteristics support consistent cycle times and repeatable quality in batch production. Direct compatibility with VBMT 1103 indexable inserts for faster tool management Designed specifically for VBMT 1103 indexable inserts and carrying the ISO designation SVJBR 1616, the holder simplifies tool inventory and speeds up changeovers. Indexable inserts allow worn edges to be rotated or replaced without replacing the entire toolbody, which reduces downtime and tooling spend per cutting edge. The clamping geometry is engineered to secure the insert position precisely, so repeatability between index changes is preserved and setup variance is kept to a minimum. Geometry tuned for right‑hand turning with a 93° engagement angle The tool is optimised for right‑hand machining with a nominal engagement 93° cutting angle, providing a balance between access to the workpiece and effective chip formation. This geometry supports controlled chip flow and predictable cutting forces in external turning operations, which in turn helps maintain dimensional stability on turned components. Where process reliability and consistent surface integrity matter, the defined cutting orientation reduces guesswork when programming or setting up the lathe. Simple integration into existing tool systems and reliable supply chain Compatibility with standard tool‑holder bores such as H11 allows straightforward integration into existing toolposts and turrets. The product is listed under SKU D234TM and is manufactured by Teknik Makina, which facilitates traceability and part standardisation across the workshop. Sourced via Metav Werkzeuge, customers benefit from a dedicated European distribution hub in Emmerich that acts as a quality filter — part of a wider offering of over 250,000 products and trusted by more than 48,000 customers — ensuring consistent availability and a secure supply chain for production environments. For process assurance and supply proximity choose the Teknik Makina SVJB clamping holder via Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for detailed integration support and fast delivery from Emmerich. Technical data SKU: D234TM Manufacturer: Teknik Makina ISO designation: SVJBR 1616 For inserts: VBMT 1103 Cutting direction: right Facts Shank: 16 x 16 mm Head width: 20 mm Cutting height: 25 mm Overall length: 100 mm Weight: 0.192 kg Cutting angle: 93° Special features Compatible with H11 toolholders Right‑hand orientation Indexable‑insert clamping system Designed for external turning operations FAQ Is this holder suitable for VBMT 1103 indexable inserts? Yes. The SVJB clamping holder is specifically designed for VBMT 1103 indexable inserts and carries the ISO designation SVJBR 1616 to ensure correct seating and repeatable positioning. What are the shank dimensions and overall length? Shank dimensions are 16 x 16 mm with an overall length of 100 mm; the holder weighs 0.192 kg, making it compact and suitable for reduced overhang setups. Which cutting direction does the tool support? The tool is configured for right‑hand cutting with a 93° engagement angle, optimised for external turning tasks requiring controlled chip flow. Can the holder be fitted into existing toolposts? The holder is compatible with H11 toolholder bores, enabling straightforward mounting in standard turrets and toolposts. What is the SKU and who manufactures the tool? The SKU is D234TM and the tool is manufactured by Teknik Makina; supply and technical support are handled via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, compact rigidity and precise left-hand cutting geometry for consistent turning results; order the tool directly via Metav Werkzeuge or contact the consultants for tailored application advice. PSSN clamping holder for SNMG indexable inserts (left-hand, 45°) by Teknik Makina The PSSN clamping holder is a left-hand turning toolholder engineered for SNMG 1204 indexable inserts, designed to deliver stable external turning and accessible cutting at a 45° approach. Left-hand turning orientation For SNMG 1204 indexable inserts Clamping height 16 mm for secure hold 45° cutting angle with 100 mm overall length Stable clamping for consistent tool life The holder provides a clamping height of 16 mm and a body width of 16 mm, creating a compact yet rigid interface between insert and shank. A 20 mm cutting-head width increases the contact surface for the insert seat, which reduces micro-movement during heavy cuts and improves repeatability. The low mass of 0.218 kg supports quicker tool-indexing and reduces inertial loads on the turret, contributing to steadier surface finish without sacrificing stability. Designed for SNMG 1204 inserts and left-hand operations Designed specifically for SNMG 1204 indexable inserts, this toolholder uses a 45° approach so that the cutting forces are directed for efficient chip formation and reduced radial vibration. The left-hand orientation is suited to lathe configurations that require reverse-tool rotation or specific fixture layouts. The indexable concept means inserts can be rotated or replaced independently of the holder, enabling rapid recovery from wear and minimising machine downtime while maintaining process consistency. Simple integration and concise installation The holder carries the ISO designation PSSNL 1616, compatible with common turret and bore-bar interfaces, and a shank identification of H12, simplifying tool management in mixed fleets. With an overall length of 100 mm, the tool offers a balance between reach and rigidity, allowing access to deeper profiles without excessive overhang. These standard references aid toolroom organisation and accelerate setup times during changeovers. Practical benefits for the workshop and supply assurance The compact design supports productive external turning where controlled chip flow and repeatable geometry are priorities. As part of a reliable supply chain, the item is offered through Metav Werkzeuge, which combines broad product availability with workshop-focused service and an established European distribution hub. For operations requiring dependable toolholding and quick insert exchange, this holder aligns performance with practical workshop logistics. For tailored application advice or to secure this Teknik Makina PSSN clamping holder through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for precise compatibility guidance and order support. Technical Data Article number: P180TM Product: PSSN clamping holder for SNMG indexable inserts Brand: Teknik Makina Facts Clamping height: 16 mm Cutting-head width: 20 mm Holder width: 16 mm Cutting-edge height: 30 mm Cutting direction: left-hand Cutting angle: 45° Overall length: 100 mm Weight: 0.218 kg Suitable for inserts: SNMG 1204 Special features ISO designation: PSSNL 1616 Shank/reference: H12 Left-hand turning orientation Designed for indexable insert system FAQ Which inserts fit this holder? The holder is designed for SNMG 1204 indexable inserts; the seat and clamping geometry match that insert format for secure seating and correct chip control. Is the holder suitable for left-hand turning only? Yes, the tool has a left-hand cutting orientation and is intended for reverse-direction external turning operations. What is the ISO designation and why does it matter? The ISO designation PSSNL 1616 identifies the holder's shank format and mounting standard, aiding compatibility checks with turrets and tool posts. What is the overall length and how does it affect rigidity? The 100 mm overall length balances reach and stiffness; shorter overhangs aid rigidity, while this length provides access for deeper external features without excessive vibration. How does the clamping height influence performance? A 16 mm clamping height ensures a compact clamp engagement that enhances insert stability, reduces micro-movements and supports consistent surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, reliable solution that combines precise compatibility with CC-- 0602 indexable inserts, a robust S12K SCLCL shank and straightforward maintenance for steady machining results. Order directly via Metav Werkzeuge or ask the consultants for application advice. Boring bar K236TM (SCLC for CC-- indexable inserts) by Teknik Makina — left‑hand, 12 mm shank The Boring bar K236TM is a left‑hand SCLC style tool for external turning and light boring operations using CC-- 0602 indexable inserts, suitable for general workshop and CNC applications. Left‑hand cutting direction Compatible with CC-- 0602 inserts 12 mm shank diameter 125 mm overall length Precision clamping and reliable insert compatibility for consistent cycles The S12K SCLCL designation denotes a standardised shank and clamping geometry that accepts CC-- 0602 indexable inserts, enabling quick insert changes and consistent seating. With a 12 mm shank diameter and a shallow cutting height of 25 mm, the tool is designed for stable presentation in collets and small holders, reducing chatter and improving surface finish. The controlled geometry translates into repeatable results across short production runs and setup changes, which supports efficient machine utilisation and predictable part quality. Designed for left‑hand operations to match specific toolpaths Left‑hand geometry and a 95° cutting angle make the boring tool particularly suited to operations where the feed moves from right to left relative to the workpiece. This orientation can simplify tool access in tight fixtures and avoid interfering with adjacent tooling, increasing process reliability. The combination of the specified cutting direction and the compact 16 mm diameter profile supports flexible fixturing and allows compatibility with a variety of small‑capacity tool posts and boring heads commonly used in jobbing and contract manufacturing. Compact form factor that eases handling and reduces downtime Weighing just 0.12 kg and measuring 125 mm overall length, this indexable insert holder offers a compact footprint that is easy to store and quick to mount. The modest mass helps to reduce inertia in short‑stroke operations, improving positional accuracy when performing frequent starts and stops. The simple clamping arrangement, referenced by the designation 06 for the clamp interface, allows straightforward insert replacement and minimises tool changeover time, supporting higher uptime on busy shop floors. Practical selection for mixed‑material workshop environments As an indexable solution, the boring bar supports economical tool management: carbide inserts can be rotated or replaced independently from the holder, reducing total cost of ownership for recurring turning and light boring tasks. The tool’s nominal figures — 12 mm shank, 25 mm cutting height, 16 mm body diameter — allow planners to match the holder with the right insert grade for the application, whether the focus is on finishing or general turning. Clear compatibility with CC-- 0602 inserts streamlines procurement and inventory management for maintenance teams and purchasing departments. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools K236TM left‑hand boring bar matches current setups and to request a tailored recommendation from our specialists Technical data Article number: K236TM Manufacturer: Teknik Makina Product name: Boring bar Designation (EN): SCLC for CC-- Indexable Inserts ISO designation: S12K SCLCL ECLASS: 21180806 Numbers / Core technical data Shank diameter: 12 mm Cutting height: 25 mm Body diameter: 16 mm Overall length: 125 mm Cutting angle: 95° Weight: 0.12 kg Designs / Special features Compatible inserts: CC-- 0602 Cutting direction: left Clamp designation: 06 Suitable for indexable insert turning and light boring FAQ What insert type fits the K236TM boring bar? The K236TM boring bar accepts CC-- 0602 indexable inserts, designed for standardised clamping and quick replacement. Is the K236TM suitable for right‑hand machining? The tool is produced with a left‑hand cutting direction, so it is intended for operations where a left‑hand orientation is required. What are the key dimensions to check for machine compatibility? Important dimensions to verify are the 12 mm shank diameter, 125 mm overall length and the 16 mm body diameter to ensure correct fit in collets or tool posts. Which designation identifies the clamping and shank style? The ISO designation S12K SCLCL indicates the specific shank and clamping style used for this indexable insert holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the compact 12 mm shank and compatibility with DC-- 0702 indexable inserts for stable, cost-effective turning; the 125 mm overall length provides controlled reach in confined set-ups. Order the S12K SD-CR boring bar directly via Metav Werkzeuge or consult our specialists for tailored technical advice. S12K SD-CR boring bar — SD-CR for DC-- 0702 indexable inserts, 12 mm shank (Teknik Makina) The S12K SD-CR is a right-hand boring bar engineered for external turning with DC-- 0702 indexable inserts, designed to provide compact rigidity and straightforward insert interchangeability. 12 mm shank diameter Fits DC-- 0702 indexable inserts 125 mm overall length 62.5° cutting angle Greater stability from compact shank design A small-diameter holder need not mean compromise. The 12 mm shank combined with a 16 mm body diameter delivers concentrated rigidity for short-reach turning tasks. The result is reduced chatter and improved surface quality when compared with longer, slender setups. The 62.5° cutting angle promotes predictable chip flow and permits consistent engagement of the cutting edge, helping to maintain repeatable results in serial production. Fast insert changes and predictable set-up times Compatibility with DC-- 0702 indexable inserts keeps tooling downtime minimal. Indexable inserts allow the cutting edge to be renewed without regrinding, which reduces per-part cost and simplifies tool management. The 125 mm overall length and standard ISO designation S12K SD-CR permit rapid mounting in common clamping systems and make tool offsets straightforward, so set-up and changeover times are shortened. Practical handling for right-hand machining operations Designed for right-hand cutting, this bar suits conventional turning directions on lathes and turning centres. With a cutting height of 25 mm and a mass of 0.122 kg, the assembly remains easy to handle while providing the necessary contact rigidity for controlled cuts. For workshops seeking economical abrasion management, the replaceable insert concept provides the primary saving: less tool waste and predictable replacement intervals rather than full-tool replacement. Contact Metav Werkzeuge for expert guidance on the Teknik Makina S12K SD-CR boring bar and fast delivery from our Emmerich hub. Technical Data Article number: K170TM Manufacturer: Teknik Makina Name: Bohrstange Type: SD-CR for DC-- Indexable Inserts ISO designation: S12K SD-CR Measurements Shank diameter: 12 mm Body diameter: 16 mm Overall length: 125 mm Cutting height: 25 mm Cutting angle: 62.5° Weight: 0.122 kg Special features Fits DC-- 0702 indexable inserts Right-hand cutting Clamping holder designation: 07 SD-CR indexable insert concept FAQ Which inserts are compatible with this boring bar? The boring bar accepts DC-- 0702 indexable inserts; the SD-CR geometry is matched to that insert form for correct seating and chip control. Is this tool intended for right- or left-hand cutting? This tool is configured for right-hand cutting, suitable for standard right-hand turning operations. What is the shank diameter and overall length? Shank diameter is 12 mm and the overall length is 125 mm for compact setups and accessible reach. What is the ISO designation of the holder? The holder is designated S12K SD-CR, reflecting the shank size and SD-CR geometry. How heavy is the tool for handling and set-up considerations? The tool weighs 0.122 kg, which facilitates safe handling and quick clamping during changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact left‑hand turning solution that pairs a stable 12 mm shank with compatibility for DC-- 0702 indexable inserts, delivering controlled internal machining and repeatable results; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed S12K SDQCL boring bar — 12 mm shank, for DC-- 0702 inserts (Teknik Makina) The S12K SDQCL is a left‑hand boring bar designed for internal turning with DC-- 0702 indexable inserts, suitable for workshops and production lines requiring compact, repeatable toolholders Left-hand cutting direction SDQCL design Suited for DC-- 0702 indexable inserts 12 mm shank diameter, 125 mm overall length 25 mm cutting height, 107.5° cutting angle Stable left‑hand turning for precision internal machining The construction focuses on delivering stable, repeatable cuts in confined bores and internal profiles. With a 12 mm shank and a compact 125 mm overall length, the toolholder reduces overhang and vibration, which supports tighter tolerances and longer insert life. The left‑hand geometry (SDQCL) is optimised for applications where reverse cutting direction is required, and the 107.5° cutting angle helps control chip flow and cutting forces. This combination enhances process reliability and reduces scrap rates in serial production. Fast changeover and compatible indexable inserts Tool management is simplified by the holder’s compatibility with DC-- 0702 indexable inserts, enabling quick insert changes and consistent seating for repeatable results. The bore‑side design accepts the standard insert seating for this size, and the reference clamp code 07 specifies the compatible clamping interface for secure fixation. Reduced setup time and standardised consumables translate into measurable productivity gains across batch sizes, making this an efficient choice for workshops and CNC turning centres aiming to increase uptime. Compact design that improves machining stability A short effective length and low mass (0.12 kg) contribute to improved dynamic behaviour during cutting, especially in internal turning operations where rigidity is critical. The 25 mm cutting height provides adequate engagement for medium‑depth passes while maintaining balance between material removal and tool life. The toolholder’s compact profile is particularly useful for tight fixtures and multi‑axis set‑ups, where minimised interference and predictable tool runout are decisive for achieving consistent surface quality. Choose Teknik Makina components via Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and procurement assistance Technical Data Article number: K272TM Manufacturer: Teknik Makina Designation: SDQC for DC-- Indexable Inserts ISO designation: S12K SDQCL Facts Shank diameter: 12 mm Cutting height: 25 mm Weight: 0.12 kg Outer diameter: 16 mm Overall length: 125 mm Cutting angle: 107.5° eClass: 21180806 Special features Left-hand cutting direction For DC-- 0702 indexable inserts Compatible clamp size: 07 SDQCL toolholder geometry FAQ What applications is this toolholder best suited for? The S12K SDQCL boring bar from Teknik Makina is intended for internal turning and threading set‑ups where a left‑hand cutting direction and compatibility with DC-- 0702 indexable inserts are required. Which inserts are compatible with this tool? Compatibility is specified for DC-- 0702 indexable inserts; the holder accepts the standard seating for this insert type and uses clamp code 07 for secure fixation. How does the shank size affect machining performance? A 12 mm shank reduces overhang and increases rigidity compared with larger, longer toolholders, improving vibration damping and repeatability during internal turning operations. Can this toolholder be used in multi‑axis turning centres? Yes, the compact 125 mm overall length and low weight make the toolholder suitable for multi‑axis set‑ups where space is limited and stable tool behaviour is essential. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the compact S12K SDQCR boring bar with a 12 mm shank, 125 mm overall length and direct compatibility with DC-- 0702 indexable inserts for precise internal turning; order via Metav Werkzeuge or consult the technical team for application support. S12K SDQCR boring bar by Teknik Makina — SDQC holder for DC-- 0702 indexable inserts, Ø16 mm The S12K SDQCR boring bar is engineered for precision internal turning and facing tasks that require a compact, rigid holder and reliable indexable insert clamping. SDQC holder for DC-- 0702 indexable inserts 12 mm shank diameter for compact toolholders 125 mm overall length for restricted bores Right-hand cutting with 107.5° cutting angle Stable performance in confined bores The compact design and 12 mm shank deliver a rigid mounting that minimises deflection during internal turning, which is essential when working in narrow bores. At an overall length of 125 mm, the bar balances reach with stability; the relatively low weight (0.12 kg) reduces centrifugal forces and simplifies handling. These characteristics support consistent surface quality and repeatable toolpaths when a robust yet compact toolholder is needed for finishing or medium‑depth turning. Quick insert changes and secure clamping Equipped for SDQC clamping and designed to accept DC-- 0702 indexable inserts, the holder permits straightforward insert seating and fast replacement cycles. The 07 clamp designation ensures a defined fit between insert and seat, which reduces setup time and improves positional certainty for successive cuts. For workshops where changeover speed and predictable tool geometry are priorities, this configuration streamlines operations without sacrificing repeatability. Geometry that supports efficient cutting The toolholder features a 107.5° cutting angle and a cutting height of 25 mm, tuned to position the insert for effective chip formation and contact conditions typical of indexable‑insert turning. Right‑hand cutting orientation is specified for conventional lathe feed directions, making the bar suitable for standard internal turning routines where predictable chip flow and clearance are required. The nominal Ø16 mm dimension reflects the external geometry relevant for bore entry and holder clearance. Practical integration for production and maintenance As a purpose‑built boring bar, the item integrates easily into modular toolsetups and is suitable for compact turret pockets or lathe holders that accept a 12 mm shank. The lightweight construction and standardised interface facilitate quick tool exchanges and simpler inventory management. For procurement and supply reliability, Metav Werkzeuge provides distribution from its Emmerich location, ensuring consistent availability for workshops and small industrial operations that depend on steady tool supply. For tailored recommendations, stock availability or application advice on the S12K SDQCR boring bar, contact Metav Werkzeuge for direct procurement and expert guidance Technical Data Article number: K142TM ISO designation: S12K SDQCR Holder type: SDQC for DC-- Indexable Inserts Compatible inserts: DC-- 0702 Facts Shank diameter: 12 mm Diameter: 16 mm Overall length: 125 mm Cutting height: 25 mm Cutting angle: 107.5° Weight: 0.12 kg Special features Right-hand cutting For DC-- 0702 indexable inserts Clamp designation: 07 FAQ What inserts fit this boring bar? The bar is specified for DC-- 0702 indexable inserts and uses the SDQC clamping concept for secure seating. Is the holder suitable for tight bores? Yes, the compact 12 mm shank and 125 mm overall length make the holder suitable for restricted internal turning operations where a slim profile is required. Which cutting direction does the tool support? This holder is configured for right‑hand cutting; the ISO designation S12K SDQCR indicates the right‑hand orientation. How does the 107.5° cutting angle affect performance? The 107.5° angle positions the insert to promote stable contact and controlled chip flow during internal turning, improving surface finish under typical indexable‑insert conditions. What is the SKU for ordering and reference? The product is listed under SKU K142TM for procurement and inventory tracking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of rigidity, precise insert compatibility and a compact design for efficient, repeatable turning operations — ideal for setups where tool change speed and stability matter. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed Teknik Makina S12K SDUCL boring bar — 12 mm shank, left-hand, for DC-- 0702 inserts S12K SDUCL boring bar for external turning with SDUC-style indexable inserts, designed for left-hand cutting operations in compact toolholders Teknik Makina S12K SDUCL boring bar Compatible with DC-- 0702 indexable inserts 12 mm shank for compact toolholders Left-hand cutting direction 125 mm overall length, 16 mm diameter Greater machining reliability through proven insert compatibility The toolholder accepts SDUC-style indexable inserts specified for DC-- 0702, providing a straightforward path to repeatable edge location and predictable chip formation. Because the insert pocket is matched to a standard insert form, users benefit from consistent cutting geometry and reduced setup variance. The nominal cutting angle (93°) supports controlled engagement in external turning tasks; when combined with the bar’s secure clamping, this geometry helps to maintain surface quality and dimensional control across production runs. Stable clamping and compact design for tight setups A 12 mm shank paired with a 16 mm body diameter and a 125 mm overall length gives a balance between rigidity and access in confined toolpost arrangements. The relatively low mass (0.12 kg) limits the inertia transmitted to smaller lathes and toolholders, while the compact proportions allow installation in multi-tool turrets or holders where space is at a premium. This combination reduces the risk of chatter during light to medium-duty operations and supports faster indexing cycles when insert changes are required. Clear identification and simple integration into existing tooling The ISO designation S12K SDUCL identifies shank size and the left-hand orientation, enabling fast selection during tool preparation. The left-hand cutting direction is explicitly indicated, avoiding ambiguity at set-up and ensuring correct mount orientation in left-hand turning applications. Compatibility with DC-- 0702 inserts simplifies procurement and replacement: standardised inserts reduce inventory complexity and shorten machine downtime compared with non-standard tool systems. Practical application notes for workshop efficiency Engineered as an external turning holder for SDUC insert types, the bar is best used where small-diameter tooling and repeatable insert positioning are priorities. Its design is suited to operations that demand quick insert changes and predictable cutting behaviour; examples include profile turning, light roughing and finishing where the insert geometry and holder stiffness govern achievable surface finish. The compact profile also supports multi-tool arrangements and is compatible with holders that accept a 12 mm shank, simplifying integration into established tooling arrays. For reliable left-hand boring solutions from Teknik Makina and swift supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich for tailored advice and transparent delivery via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: K252TM Manufacturer: Teknik Makina Model designation (ISO): S12K SDUCL For indexable inserts: DC-- 0702 ECLASS: 21180806 Dimensions & weights Shank diameter: 12 mm Cutting height: 25 mm Cutting angle: 93° Diameter: 16 mm Overall length: 125 mm Weight: 0.12 kg Features & compatibility Left-hand cutting direction Compatible with SDUC indexable inserts SDUC for DC-- indexable inserts (designation) ISO designation confirms shank and orientation Suitable for compact toolholders FAQ Which inserts fit this boring bar? The holder is designed for DC-- 0702 indexable inserts in the SDUC form; using inserts of this specification ensures proper seating and cutting geometry for the S12K SDUCL boring bar (Teknik Makina, SKU K252TM). Is the tool for left- or right-hand cutting? This toolholder is specified for left-hand cutting; the ISO code SDUCL denotes the left-hand orientation and should be mounted accordingly. What shank size is required for the toolholder? The bar has a 12 mm shank, so the receiving toolholder must accept a 12 mm mounted shank for correct clamping and alignment. Can this boring bar be used in compact turrets? Yes — the compact 125 mm overall length and 12 mm shank are suited to compact toolholders and multi-tool turrets, providing access where longer bars would interfere. How does the cutting angle affect performance? The 93° cutting angle provides stable engagement for external turning, promoting controlled chip evacuation and consistent surface results when combined with the correct insert geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The compact combination of stable 93° cutting geometry, a 12 mm shank and compatibility with DC-- 0702 indexable inserts ensures reliable internal turning with minimal setup time; order the tool via Metav Werkzeuge or consult the technical team for application advice. S12K SDUCR boring bar — compact indexable insert holder for internal turning, right-hand cutting The S12K SDUCR is a right-hand boring bar engineered for internal turning operations using DC-- 0702 indexable inserts, optimised for confined toolposts and precision bores Compact 12 mm shank for tight setups Accepts DC-- 0702 indexable inserts 93° cutting angle for stable cutting Lightweight 0.12 kg for easy handling Precision for confined bores: compact shank, reliable geometry The design focuses on delivering consistent bore quality in limited setups. With a 12 mm shank and a total length of 125 mm, the holder suits machines where space is at a premium while still enabling accurate internal turning. The combination of a short overall length and rigid construction reduces deflection, which directly improves roundness and surface finish; this makes the tool particularly suitable for shops that require repeatable results on small to medium workpieces. The compact format also shortens changeover time when swapping to alternative holders. Stable cutting performance from optimised insert geometry A 93° cutting angle provides a balance between cutting stability and chip control, lowering vibration during engagement and extending insert life. Designed for DC-- 0702 inserts, the toolholder transfers cutting forces efficiently, so each pass remains steady even during interrupted cuts. The right-hand cutting orientation supports conventional spindle and toolpath strategies in many turning centres. For machinists, the technical result is fewer rejects and longer intervals between insert changes, which contributes to measurable productivity gains. Compatibility and quick setup for productive workflows The holder accepts standard DC-- 0702 indexable inserts and uses a clamping designation "07" for the screw/clamp interface, allowing quick insert changes and secure retention. The nominal bore diameter of 16 mm and the effective cutting height of 25 mm match common shop requirements for internal turning and boring. Weighing just 0.12 kg, the component is easy to handle during tool assembly and inspection, while its standardised interface supports straightforward integration into existing tool inventories. Confidence from a reliable supply partner Sourcing precision tooling from a dependable supplier reduces procurement risk. Metav combines a broad product range with quality filtering at its Emmerich hub, supporting traceable deliveries and technical assistance. For operations that value steady throughput and reduced supplier complexity, the availability of compatible holders and matching inserts in one channel simplifies planning and speeds up replenishment—advantages that matter on the shop floor and in the planner’s spreadsheet. Contact Metav Werkzeuge for tailored application advice and secure the S12K SDUCR through our Emmerich hub: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: K122TM Manufacturer: Teknik Makina Designation: Bohrstange / S12K SDUCR Facts Shank diameter: 12 mm Cutting height: 25 mm Weight: 0.12 kg Cutting angle: 93° Diameter (holder): 16 mm Overall length: 125 mm Cutting direction: right Features For indexable inserts: DC-- 0702 Clamping holder designation: 07 Right-hand boring bar Compact format for tight setups Suitable for internal turning and boring FAQ What insert type fits this boring bar? The holder is designed for DC-- 0702 indexable inserts; the S12K SDUCR accepts these inserts with the specified clamping interface. Is the shank suitable for constrained toolposts? Yes, the 12 mm shank and 125 mm overall length of the S12K SDUCR make it well suited for tight setups and compact toolholders. Which cutting direction does the tool use? This boring bar is specified for right-hand cutting, matching common turning strategies in many lathes and turning centres. How can Metav help with selecting the correct insert grade? Metav Werkzeuge can advise on insert grades and compatibility for the S12K SDUCR based on workpiece material and machining parameters; contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid toolholder that combines a 12 mm shank with a 16 mm cutting diameter and compatibility with DC-- 0702 indexable inserts for consistent turning results; order the part via Metav Werkzeuge or consult the team for application support. S12K SDXCR boring bar — Right‑hand toolholder for DC-- 0702 indexable inserts (Teknik Makina) The S12K SDXCR is a right‑hand boring bar designed for precision turning with DC-- 0702 indexable inserts in CNC lathes and turning centres. 12 mm shank diameter Compatible with DC-- 0702 inserts Right‑hand cutting orientation 125 mm overall length Stability and reproducible turning performance The combination of a 12 mm shank and 125 mm overall length provides a balanced profile that limits deflection during light to medium turning operations. A 16 mm cutting diameter together with a 120° cutting angle supports a stable engagement of the insert and helps to maintain consistent surface finishes and dimensional accuracy. Reduced vibration during the cut leads to fewer rejects and more predictable cycle times, making the toolholder suitable for shops that prioritise process reliability and repeatable part quality. Fast insert handling and cost‑effective indexable system Designed for use with DC-- 0702 indexable inserts, the toolholder simplifies tool management and reduces toolchanging time. The cutting height 30 mm specification ensures correct insert seating and secure clamping, while the SDXCR style facilitates straightforward replacement of the indexable carbide tips. This modular approach lowers tooling inventory costs and enables rapid adaptation of cutting geometry for different turning tasks, improving overall workshop throughput. Practical workshop integration and setup Marked with the ISO designation S12K SDXCR and a clamp size reference of 07, the holder integrates easily into standard toolposts and heads compatible with the given shank size. The unit’s light weight of 0.12 kg allows for quick manual handling during setup and inspection, yet its geometry maintains sufficient rigidity for typical lathe operations. The right‑hand orientation matches clockwise spindle directions; selecting the appropriate cutting direction avoids machining errors and prolongs insert life. Why this tool supports efficient production Using an indexable boring bar like this one reduces downtime for regrinding and permits straightforward replacement of cutting edges, translating into measurable productivity gains over time. The tool’s geometry and dimensions were chosen to balance accessibility in tight setups with the stiffness required for accurate turning, making it a practical component for production lines and jobbing workshops alike. Discuss application requirements with Metav Werkzeuge for seamless integration of the S12K SDXCR boring bar into the production process — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice Technical Data SKU: K470TM Manufacturer: Teknik Makina ISO designation: S12K SDXCR Product: Boring bar (SDXCR for DC-- indexable inserts) Facts Shank diameter: 12 mm Cutting diameter: 16 mm Overall length: 125 mm Cutting height: 30 mm Cutting angle: 120° Weight: 0.12 kg Cutting direction: right ECLASS: 21180806 Special features Compatible with DC-- 0702 indexable inserts SDXCR toolholder style Clamp designation: 07 Right‑hand orientation FAQ Which inserts fit this boring bar? The boring bar accepts DC-- 0702 indexable inserts; the SDXCR style ensures correct seating and secure clamping for these insert types. Is the tool suitable for heavy roughing cuts? Due to its 12 mm shank and light weight, the holder is optimised for light to medium turning operations rather than heavy roughing. How is the cutting direction defined? The toolholder is configured for right‑hand cutting, compatible with standard clockwise spindle rotation on lathes and turning centres. What size is the shank and which setups is it compatible with? The shank diameter is 12 mm (ISO designation S12K), and the clamp reference 07 indicates compatibility with holders and toolposts designed for this size. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, rigid design and precise compatibility with TCMT 1102 inserts for consistent internal turning results; the combination of a 12 mm shank and a 125 mm overall length supports stable machining and simplified tool setup. Order the item via Metav Werkzeuge or consult the specialists there for application advice and availability. S12K STFCL boring bar – STFC for TCMT indexable inserts, left-hand The S12K STFCL boring bar is a left-hand internal turning holder designed for use with TCMT 1102 indexable inserts, offering a compact shank and a 90° cutting configuration for reliable lathe operations. ISO designation S12K STFCL compatible For TCMT 1102 indexable inserts Left-hand cutting direction, 90° angle Shank Ø12 mm and 125 mm overall length Stable mounting and precise insert compatibility for repeatable results The S12K STFCL designation denotes a standardised shank and clamping geometry that simplifies tool selection and machine setup. With compatibility for TCMT 1102 indexable inserts, the holder ensures repeatable insert seating and consistent cutting edge position, which reduces the need for frequent readjustment. This results in a predictable machining process and supports shorter machine downtime when replacing inserts. Rigid design that reduces vibration and improves surface finish A shank Ø12 mm combined with a 16 mm diameter cutting section and a compact 125 mm length provides a stiff tool assembly that helps suppress chatter in typical internal turning applications. The reduced deflection improves surface quality and dimensional stability, especially in finishing passes where a 90° cutting angle and left-hand cutting orientation are required. The tool's modest weight (0.118 kg) contributes to easier handling without compromising rigidity. Efficient insert handling and lower operating cost Designed for indexable inserts, the holder allows fast replacement of worn cutting edges without full tool withdrawal from the machine. This modular approach supports efficient production workflows: inserts can be rotated or exchanged quickly, lowering tooling consumption and contributing to a leaner process. The left-hand configuration suits turning operations where the workpiece feed and lathe set-up demand a reversed cutting direction. Practical setup and shop-floor advantages The compact holder size and standard ISO labelling facilitate rapid identification and integration into existing toolbanks and spindle arrangements. Clear designation and standardised clamping reduce set-up errors and accelerate changeover times at the machine. The straightforward geometry also aids in programming and fixture planning, making the holder suitable for workshops seeking dependable, easy-to-standardise tooling components. For tailored machining recommendations or to order the Teknik Cutting Tools S12K STFCL boring bar, contact Metav Werkzeuge — expert advice and reliable supply from Emmerich are available to ensure the correct tool selection for the application Technical Data Article number: K184TM Manufacturer: Teknik Makina SKU: K184TM Shank diameter: 12 mm Cutting section diameter: 16 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.118 kg Cutting angle: 90° ISO designation: S12K STFCL Compatible inserts: TCMT 1102 Insert style: STFC for TCMT indexable inserts Cutting direction: left FAQ What insert type is recommended for this holder? The holder is designed for TCMT 1102 indexable inserts; using the specified insert type ensures correct seating and cutting geometry for the Teknik Cutting Tools S12K STFCL boring bar. Is the cutting direction left-hand or right-hand? This tool features a left-hand cutting orientation, making it suitable for internal turning operations that require reversed feed direction. What are the key dimensions to check for machine compatibility? Verify the shank Ø12 mm, overall length 125 mm and the 16 mm cutting diameter when planning tooling holders and turret pockets to ensure correct fit. How does the 90° cutting angle influence machining? A 90° cutting angle provides a perpendicular relief for facing and shoulder operations, promoting predictable chip flow and consistent surface finish in internal turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a robust 18 mm shank, a 95° cutting angle and compatibility with CC-- 09T3 indexable inserts for reliable, repeatable turning operations; order directly via Metav Werkzeuge or consult our specialists for fitment and delivery. SCLC boring bar S14Q SCLCR (for CC-- 09T3 inserts) — 18 mm shank, 180 mm overall length (Teknik Makina) The SCLC boring bar S14Q SCLCR is a right-hand external turning holder designed to accept CC-- 09T3 indexable inserts for precise facing and finishing in CNC turning applications 18 mm shank for robust clamping Compatible with CC-- 09T3 inserts 95° cutting angle for precise engagement 180 mm overall length for deep reach Consistent clamping for steady machining forces A solid 18 mm shank provides a secure grip in standard toolholders, reducing vibration and improving surface finish. The holder’s construction maintains tool alignment during the cut, which translates into fewer rejects and less rework. The ISO designation S14Q SCLCR denotes a standardised holder geometry that simplifies integration with existing turret setups and reduces setup time. Designed for insert compatibility and accessibility Built specifically for CC-- 09T3 indexable inserts, this turning holder ensures correct seating and repeatable index positions, enabling quick insert changes and predictable tool life. The 180 mm overall length gives extra reach for deep or recessed operations while the 16 mm cutting diameter and 45 mm cutting height balance rigidity with access, making the holder suitable for many external turning tasks in jobbing and series production. Precise engagement and efficient chip control The 95° cutting angle sets the insert for a controlled entry into material, improving engagement stability and reducing chatter on interrupted cuts. With a lightweight construction of approximately 0.285 kg, the holder minimises centrifugal loads at higher spindle speeds without compromising rigidity. The right-hand cutting orientation supports standard turning cycles and straightforward programming on CNC lathes, while the robust tool geometry supports consistent chip formation and easier post-process cleaning. For expert advice on integrating Teknik Cutting Tools’ SCLC boring bar into existing toolrooms and for supply via Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K108TM Brand: Teknik Makina ISO designation: S14Q SCLCR Model: SCLC for CC-- Indexable Inserts SKU: K108TM Key dimensions Shank diameter: 18 mm Overall length: 180 mm Cutting diameter: 16 mm Cutting height: 45 mm Cutting angle: 95° Weight: 0.285 kg Compatibility & features Compatible inserts: CC-- 09T3 Cutting direction: right Clamping size: 09 Suitable for external turning and facing Right-hand turning holder design FAQ What insert type fits this holder? The holder accepts CC-- 09T3 indexable inserts; the geometry ensures correct seating and repeatable indexing for secure clamping. Is the holder suitable for deep reach boring? With an 180 mm overall length, the tool is designed to reach recessed areas while maintaining rigidity for many external turning tasks. What is the shank diameter and why does it matter? The shank diameter is 18 mm; this dimension ensures robust clamping in standard toolposts and reduces vibration for improved surface finish. Can this holder be used on high-speed lathes? The lightweight design (≈ 0.285 kg) and stable geometry make the holder suitable for moderate to high spindle speeds, provided the correct insert grade and machine parameters are used. What is the ISO designation and how does it help? The S14Q SCLCR ISO designation defines the holder’s interface and orientation, simplifying selection and ensuring compatibility with turret systems and toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Schaftfräser für LOEX 0804 Wendeplatten von Teknik Makina Der Schaftfräser bietet präzise Wechselplattenaufnahme für LOEX 0804 Wendeplatten und ist ausgelegt für stabile Bearbeitung auf Fräszentren und universellen Werkzeugmaschinen. 16 mm Schaftdurchmesser für hohe Rundlaufstabilität Kompatibel mit LOEX 0804 Wendeplatten von SECO 150 mm Gesamtlänge für flexible Einspannungstiefen 40 mm Schneidenlänge für effiziente Spanabnahme Robustheit und Schnittleistung für produktive Zerspanung Der Fräskörper ist auf zuverlässige Standzeit und konstante Schnittbilder ausgelegt. Mit Schaftdurchmesser 16 mm und 2 Schneiden sorgt das Werkzeug für geringe Vibration und gleichmäßigen Spanabfluss. Die Gesamtlänge 150 mm ermöglicht variable Einspannungen, während die Schaftlänge Schneide 40 mm gezielte Zustellungen erlaubt. Daraus resultieren höhere Vorschübe bei stabiler Oberflächenqualität und reduzierte Rüstzeiten. Einfache Wechseltechnik und Kompatibilität mit SECO Wendeplatten Die Aufnahme ist speziell für LOEX 0804 Indexplatten konzipiert und passt zu Wendeplatten des Herstellers SECO, was schnellen Ersatz und breite Verfügbarkeit sicherstellt. Der Wechsel erfolgt über die mitgelieferte Schraube; empfohlenes Werkzeug: Torx Schlüssel T8 und Schraube M2,5x7. Für Anwender ohne tiefere Plattenkenntnis: LOEX 0804 bezeichnet die Form und Größe der Indexplatte und gewährleistet durch standardisierte Geometrie reproduzierbare Schnittwerte. Praktischer Einsatz und Bedienkomfort im Alltag Im Maschinenalltag erleichtert die Auslegung mit zwei Schneiden das effiziente Abtragen von Material bei geringem Kraftbedarf. Die kompakte Bauform reduziert Aufspannlängen und erhöht die Steifigkeit, was besonders bei Serienbetrieb zu gleichbleibenden Ergebnissen führt. Austausch und Montage der Platten sind mit dem Torx Schlüssel T8 werkstattgerecht gelöst, was den Wartungsaufwand verringert und Stillstandszeiten minimiert. Bei spezifischen Bearbeitungsfragen steht die technische Beratung von Metav gerne zur Verfügung. Empfohlen wird der Einsatz des Schaftfräsers von Teknik Makina mit LOEX 0804 Wendeplatten für Anwender, die eine wirtschaftliche, kompatible und einfach wartbare Lösung suchen – bei Bedarf technische Details per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produkteigenschaften Artikelnummer: S294TM Bezeichnung: Schaftfräser für LOEX 0804 Wendeplatten Marke: Teknik Makina Produktart: Schaftfräser SKU: S294TM Daten Schaftdurchmesser: 16 mm Gesamtlänge: 150 mm Schaftlänge Schneide: 40 mm Schneiden: 2 Gewicht: 0,224 kg Besonderheiten Passend für Wendeplatten: LOEX 0804 Passend für Wendeplatten Hersteller: SECO Torx Schlüssel: T8 Torx Schraube: M2,5x7 FAQ Wie sicher ist die Kompatibilität mit SECO LOEX 0804 Wendeplatten? Der Schaftfräser von Teknik Makina (S294TM) ist speziell für LOEX 0804 Platten ausgelegt und bietet volle Kompatibilität zu SECO‑gefertigten Platten, sodass Standardplatten direkt eingesetzt werden können. Welche Einspanntiefe ermöglicht das Werkzeug praktisch? Die Gesamtlänge 150 mm kombiniert mit einer Schaftlänge Schneide 40 mm erlaubt variable Einspannungen und gezielte Schnitttiefen für unterschiedliche Bearbeitungsaufgaben. Wie erfolgt der Plattenwechsel und welches Werkzeug wird benötigt? Die Wendeplatten werden über eine Schraubverbindung fixiert; empfohlenes Werkzeug zum Lösen und Anziehen ist der Torx Schlüssel T8 für die Torx Schraube M2,5x7. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise geometry, sturdy shank design and insert compatibility to maintain consistent external turning operations; order the tool via Metav Werkzeuge or consult our specialists for application advice. SCLC for CC-- Indexable Inserts — S16Q SCLCR Boring Bar (Ø16, 180 mm) by Teknik Makina The SCLC for CC-- Indexable Inserts is a right-hand external boring bar designed for turning operations with CC-- 09T3 indexable inserts, suitable for shops and CNC lathes requiring stable insert mounting. Right-hand cutting configuration Ø16 mm cutting diameter 180 mm total length Compatible with CC-- 09T3 inserts Consistent chip engagement for steady turning results The holder is engineered as a boring bar for external turning, combining a compact profile with defined geometry to support repeatable cuts. Thanks to the Ø16 mm nominal cutting diameter and the 95° cutting angle, the tool provides a stable cutting engagement that reduces vibration in light- to medium-duty turning operations. The compatibility with CC-- 09T3 indexable inserts simplifies tool procurement and changeover, while the right-hand configuration ensures the correct cutting direction for standard lathe set-ups. By choosing a purpose-built insert holder the machining process gains in predictability and surface finish quality. Robust shank and insert clamping for fast set-up The component features a 20 mm shank diameter that contributes to rigidity at the tool post and lowers deflection under cutting forces, improving dimensional control. A cutting height of 30 mm ensures the insert seat aligns closely with common tool-post setups, reducing the need for shims or adjustments. The assembly weighs 0.317 kg, which keeps inertial load low during rapid tool indexing or spindle acceleration. This construction shortens preparation time and supports efficient cycle-times on production lathes and turning centres. Practical advantages on the shop floor The tool holder’s ISO designation S16Q SCLCR indicates an industry-standard interface and orientation, simplifying integration into existing tool systems. The indexable-insert approach offers lower running costs compared with brazed tooling because only the insert is consumed during wear. For operations where setup consistency matters, the combination of a defined shank, clear insert compatibility and a standard length of 180 mm reduces downtime for replacements and inspection. Technical clarification and cutting data can be provided from the supplier to help match grade and geometry with workpiece material. For machining requirements that demand consistent external turning, consider the Teknik Cutting Tools S16Q SCLCR boring bar and contact Metav Werkzeuge for application guidance and prompt supply from Emmerich Technical data Article number: K110TM Designation ISO: S16Q SCLCR Model name: SCLC for CC-- Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 16 mm Total length: 180 mm Shank diameter: 20 mm Cutting height: 30 mm Weight: 0.317 kg Cutting angle: 95° Cutting direction: right-hand Special features For indexable inserts CC-- 09T3 Right-hand external boring bar configuration Compact, ISO-style shank Brand: Teknik Makina SKU: K110TM FAQ What insert type fits this tool holder? The holder is specified for CC-- 09T3 indexable inserts; using the correct insert size ensures proper seating and reliable cutting performance with the S16Q SCLCR boring bar. Is the bar suitable for use on CNC lathes? Yes, the S16Q SCLCR indexable-insert holder is designed for CNC and manual lathes where a right-hand external boring solution and ISO-style mounting are required. How does the shank diameter influence performance? A 20 mm shank diameter increases stiffness at the tool post, which reduces deflection and supports better dimensional accuracy during turning operations with this insert holder. Can this tool holder reduce setup time compared with brazed tools? Yes, the indexable design of this boring bar reduces downtime because worn inserts are replaced quickly without the need to change the whole tool, supporting higher machine availability. What cutting direction is this tool made for? This tool is configured for right-hand cutting, matching standard lathe orientations and conventional external turning procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of precise indexable insert compatibility, a rigid shank and lightweight design for steady, repeatable turning results; order the tool directly via Metav Werkzeuge or consult our specialists for specification support. Teknik Makina Boring bar SCLC for CC-- Indexable Inserts (S16R SCLCR) — Right‑hand, Ø16 mm A Boring bar SCLC for CC-- Indexable Inserts engineered for right‑hand turning, with Ø16 mm diameter and 200 mm overall length in the ISO S16R SCLCR configuration ISO S16R SCLCR configuration Compatible with CC-- 09T3 inserts Right‑hand cutting, 95° cutting angle Ø16 mm diameter, overall length 200 mm Faster insert changes and consistent tool life The SCLC style toolholder is built around indexable inserts, which allow fast, cost‑effective edge renewal without regrinding. By using CC-- 09T3 inserts the system reduces downtime for insert changes and simplifies inventory of cutting edges. For workshops seeking predictable production cycles, the combination of a standard S16R SCLCR form and widely available inserts delivers reduced set‑up time and consistent cutting performance across batches. Stable clamping and improved surface quality Rigidity is central to reproducible machining. The bar's shank diameter 20 mm and compact Ø16 mm tool body minimise deflection under cut, while a 95° cutting angle supports secure insert seating and stable chip evacuation. At just 0.329 kg, the assembly is light enough for precise tool balance yet stiff enough to reduce chatter, improving surface finish and dimensional repeatability in turning operations where stability matters. Seamless fit into standard turning workflows Designed for right‑hand turning operations, this boring bar integrates with common lathe setups that accept the SCLC clamping style and CC-- insert family. The 200 mm overall length provides reach for a variety of external turning tasks while maintaining manageable overhang. For machinists who require clear specification data before purchase, the tool’s technical form factor and compatibility mean straightforward selection for routine maintenance and production environments. For precision turning tasks that demand reliable insert compatibility, order the Teknik Cutting Tools boring bar SCLC from Metav Werkzeuge or request personalised advice from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K111TM Manufacturer: Teknik Makina Product: Boring bar (SCLC for CC-- Indexable Inserts) ISO designation: S16R SCLCR Facts Diameter: 16 mm Overall length: 200 mm Shank diameter: 20 mm Cutting height: 30 mm Weight: 0.329 kg Cutting angle: 95° Cutting direction: Right Compatible inserts: CC-- 09T3 Special features For CC-- 09T3 indexable inserts SCLC for CC-- Indexable Inserts ISO S16R SCLCR format Right‑hand turning application FAQ Which inserts fit this boring bar? The boring bar is specified for CC-- 09T3 indexable inserts; the ISO S16R SCLCR form factor ensures secure clamping of these inserts. What are the key dimensions to consider for setup? Key dimensions are Ø16 mm diameter, shank diameter 20 mm, overall length 200 mm and a cutting height of 30 mm, as listed for the K111TM tool. Is the tool suitable for left‑hand machining? The tool is configured for right‑hand cutting; left‑hand operations would require the corresponding mirror configuration. How does the 95° cutting angle affect machining? A 95° cutting angle positions the insert to favour stable engagement and improved chip flow, which helps maintain surface finish and tool life under typical turning loads. Can this boring bar be balanced for high‑speed applications? The K111TM’s compact weight and geometry support easier balancing, but final balance must be verified in the specific machine and setup used. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com