Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the secure fit provided by the M5 thread and the compact 16 mm overall length to maintain stable tool clamping and consistent machining results; combine reliable performance with quick servicing and order via Metav Werkzeuge or ask the Metav consultants for technical guidance. Screw TC178TM by Teknik Makina — M5 thread, 16 mm overall length A Screw TC178TM designed for clamping end mills, providing compact fixation in toolholders and cutters for CNC and manual milling applications. M5 thread for reliable clamping 16 mm overall length for compact fit 7.8 mm head diameter for secure seating Fits 3 mm Allen key for standard assembly Stable clamping for consistent machining The primary benefit of this clamping screw is repeatable tool retention through its M5 thread and compact dimensions. The combination of M5 thread and the specified head diameter yields secure axial fixation, which reduces micro-movement under cutting forces and helps preserve tool concentricity. For workshops that value process stability, this results in fewer rejects and more consistent surface finish on machined parts. The design suits end mill holders where space is limited and precision is required. Fast setup with standard workshop tools Installation and removal are straightforward thanks to the compatibility with a 3 mm Allen key, cutting setup time and simplifying maintenance tasks. The modest 16 mm overall length and nominal head diameter make the screw easy to reach in confined toolholders, accelerating changeovers and reducing machine downtime. For production environments focused on efficiency, quick tool changes translate into higher machine utilisation and lower operating costs per component. Practical compatibility and reliable sourcing With a nominal head diameter of 7.8 mm and a listed mass of 0.1 kg per item, this component is sized for common end mill assemblies and small toolholders used across general milling operations. Classified under eClass 21189290, the fastener is documented for procurement and inventory systems. Sourcing via a dedicated distributor ensures consistent availability and traceability, providing workshops with the stock control and delivery reliability expected in professional settings. For reliable tool clamping and technical advice on suitability for specific holders, contact Metav Werkzeuge — Metav’s specialists in precision components are available from Emmerich and can provide procurement and application guidance by email or phone. Technical Data Article number: TC178TM Manufacturer: Teknik Makina Description: Screw for end mill ECLASS: 21189290 Facts Thread: M5 Overall length: 16 mm Head diameter: 7.8 mm Weight: 0.1 kg Special features Compatible with 3 mm Allen key Suitable for clamping end mills SKU: TC178TM FAQ What thread does the clamping screw use? The screw uses an M5 thread, as specified for the TC178TM from Teknik Makina. Which Allen key fits the screw? Assembly and removal of the TC178TM require a 3 mm Allen key, compatible with standard workshop tool sets. What is the overall length and head diameter? Overall length is 16 mm and the head diameter is 7.8 mm, matching compact toolholder requirements. Can this screw be used for common end mill holders? Yes, the TC178TM is specified for clamping end mills and is designed to fit typical compact holders where an M5 fastener is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, screw‑in design that combines compatibility with BLMP 0603 indexable inserts, a 100° cutting angle for stable engagement and fast insert changes via a Torx screw—ideal for streamlined machining operations; order directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in milling cutter VT190TM — 16 mm, 100° for BLMP 0603 Indexable Inserts (Teknik Makina) Screw-in milling cutter VT190TM for BLMP 0603 indexable inserts, designed for compact holders and precise, repeatable milling tasks in production and workshop environments 16 mm shank diameter for compact setups 100° cutting angle for stable engagement Compatible with BLMP 0603 indexable inserts M8 thread and M3x6.5 Torx screw (T8) Lightweight 44 g for easy handling High compatibility and mechanical clarity for standard indexable systems The screw‑in milling cutter VT190TM is engineered to interface reliably with common indexable systems. Its 16 mm diameter and M8 thread provide a compact mounting footprint while ensuring secure clamping. Compatibility with BLMP 0603 indexable inserts from Taegutec simplifies procurement and inventory: standardised inserts make tool replenishment predictable and keep set‑up times low. For operators new to indexable tooling, this configuration reduces complexity by using familiar insert geometries and a conventional screw‑in mounting. Stable cutting performance with straightforward handling A 100° cutting angle offers a balanced compromise between shearing and edge strength, promoting steady chip formation and reducing chatter in many milling operations. The tool features two cutting edges and a 25 mm cutting height, delivering effective material engagement across the insert length. At 41 mm total length and weighing only 44 g, the tool is easy to handle and manoeuvre in tight setups; the result is reduced operator fatigue and quicker changeovers when multiple tools are in use. Fast insert changes and efficient maintenance routines Insert replacement uses an M3x6.5 Torx screw secured with a T8 Torx key, allowing quick, repeatable fastening without specialised fixtures. The screw‑in design keeps assembly straightforward and maintenance predictable: worn inserts can be swapped in minutes, lowering machine downtime and improving throughput. This configuration supports a rational approach to tooling costs—indexable inserts and a durable cutter body keep life‑cycle expenses transparent and easier to manage than many integral tools. Practical applications and workshop integration The compact, screw‑in format suits shops that prioritise versatility and inventory efficiency. The tool works with the BLMP 0603 insert family and is often chosen where quick insert indexing and a secure clamping interface are required. Its modest overall length and lightweight construction make it well suited to smaller spindle clearances or secondary operations in a production cell. For customers seeking predictable, repeatable milling results with standard insert systems, this screw‑in cutter provides a pragmatic balance of performance and serviceability. Contact Metav Werkzeuge today to discuss how the VT190TM from Teknik Makina fits specific machining setups or to request stock information from our Emmerich warehouse at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT190TM Manufacturer: Teknik Makina Product name: Screw-in milling cutter Secondary designation: for BLMP 0603 Indexable Inserts eClass: 21180806 ETIM: EC011860 Core technical data Diameter: 16 mm Thread: M8 Thread height: 16 mm Cutting angle: 100° Cutting edges: 2 Cutting height: 25 mm Total length: 41 mm Weight: 0.044 kg Screw: M3x6.5 (Torx) Torx key: T8 Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Special features Screw‑in mounting design Compatible with BLMP 0603 indexable inserts Secured with M3x6.5 Torx screw (T8) Compact overall length for confined set‑ups Two cutting edges for effective engagement FAQ Which indexable inserts fit this cutter? The screw‑in milling cutter VT190TM is compatible with BLMP 0603 indexable inserts and is optimised for inserts from Taegutec What is the shank diameter and thread specification? The VT190TM has a 16 mm shank diameter and an M8 thread for screw‑in mounting How are the inserts secured in the cutter? Inserts are fastened with an M3x6.5 Torx screw using a T8 key on the VT190TM How many cutting edges does the tool provide? The VT190TM features two cutting edges, delivering consistent engagement across the insert What are the key dimensions of the cutter? Key dimensions for the VT190TM: total length 41 mm, cutting height 25 mm, weight 0.044 kg Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of compact, secure mounting and 90° cutting geometry to achieve precise shoulder cuts in confined setups; combine low mass and easy insert replacement for shorter downtime. Order the tool directly via Metav Werkzeuge or consult our specialists for delivery and suitability advice. Screw-in milling cutter VT200TM – 16 mm diameter, 90° cutting angle by Teknik Makina A compact screw-in milling cutter VT200TM designed for turning and face operations with ADMX 0702 indexable inserts, engineered for tight-access machining and rapid insert changes. 16 mm diameter for compact machining M8 screw-in thread, 18 mm thread length 90° cutting angle for square shoulder cuts Four cutting edges for balanced cutting action Compatible with Pramet ADMX 0702 inserts Precise performance in confined spaces The VT200TM offers a 16 mm body and an overall length of 41 mm, which reduces overhang and improves rigidity in restricted tool positions. The small mass of 0.041 kg lowers centrifugal forces and vibration, resulting in steadier cutting conditions and improved surface finish. For operations where access and stability matter, the compact geometry enables repeatable shoulder and facing cuts while maintaining consistent tool life. The design therefore translates directly into fewer rejects and less rework, supporting efficient production flow. Fast, secure mounting and straightforward insert handling Mounting is accomplished via an M8 screw-in thread with a thread engagement height of 18 mm, ensuring a secure connection to the toolholder; the clamping screw specification is M2x4.2 and requires a T6 Torx key. The cutter is configured for ADMX 0702 indexable inserts from Pramet, allowing quick replacement without complex realignment. Indexable inserts mean that when a cutting edge wears, the insert is rotated or replaced rather than remanufacturing the whole cutter — a workflow that reduces downtime and lowers lifetime costs. Clear torque and key specifications make maintenance tasks predictable and efficient. Application focus and measurable productivity benefits With a 90° cutting angle and four teeth, this screw-in cutter is optimised for square shoulders and face machining where dimensional accuracy is critical. The cutting height of 23 mm supports adequate chip load for stable material removal in short-reach setups. By combining a compact diameter with multi-edge cutting, the tool balances material removal rate with surface integrity, enabling faster cycle times on small-diameter features. For workshops seeking dependable, repeatable results in precision turning and facing, this configuration offers a reliable compromise between accessibility and cutting performance. For tailored procurement of the Teknik Cutting Tools screw-in milling cutter VT200TM with ADMX 0702 compatibility, contact Metav Werkzeuge for expert advice and reliable supply directly from Emmerich. Technical data SKU: VT200TM Name: Screw-in milling cutter for ADMX 0702 indexable inserts Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 16 mm Total length: 41 mm Thread: M8 Thread height: 18 mm Cutting height: 23 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.041 kg Torx screw: M2x4.2 Torx key: T6 Special features Compatible with ADMX 0702 indexable inserts Designed for Pramet insert system Compact design for limited-access machining Balanced multi-edge geometry for stable cutting FAQ Which insert type fits this cutter? The cutter is configured for ADMX 0702 indexable inserts and is compatible with Pramet ADMX 0702 inserts as specified for the VT200TM. What is the mounting thread and screw specification? Mounting uses an M8 screw-in thread with 18 mm thread engagement; the clamping screw is M2x4.2 and the required Torx key is T6. What machining tasks is the cutter intended for? The 90° cutting geometry and four cutting edges make the tool suitable for square-shoulder cutting and facing in compact setups where rigidity and repeatability are required. How many cutting edges does the tool have and what is the benefit? The cutter has four cutting edges, which provide balanced material removal, lower vibration and improved surface quality for short-reach operations. What are the key dimensions that affect rigidity? Key dimensions are the 16 mm diameter, 41 mm total length and 0.041 kg mass; these combine to reduce overhang and improve stability during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, precise 90° cutting geometry and straightforward insert compatibility for consistent face-milling results; order directly via Metav Werkzeuge or consult their advisors for matching inserts and setup assistance. Screw-in Milling Cutter VT136TM — 90° shank cutter for APKT 1003 indexable inserts by Teknik Makina The Screw-in Milling Cutter VT136TM is a compact, 90° screw-in cutter intended for precision face milling and short overhang operations with Korloy APKT 1003 indexable inserts. 90° cutting angle for reliable face milling Compatible with Korloy APKT 1003 inserts M8 screw-in shank, Ø 16 mm Torx fastener M2.5x5.5, keyed with T8 High-precision mounting and stable tool geometry for repeatable results The VT136TM is engineered as a screw-in milling cutter with a screw-in shank (M8) and a compact diameter of Ø 16 mm, enabling a low overhang and predictable tool behaviour. Compatibility with Korloy APKT 1003 indexable inserts ensures that proven insert geometries are available for a wide range of face-milling tasks. The design reduces setup variability: the central threaded connection and clear reference surfaces permit consistent orientation, while the cutter’s defined 90° cutting angle produces square shoulders and accurate board finishes. This combination supports process stability in repeated cycles and simplifies tool selection in mixed-production environments. Rapid insert changes and secure clamping to reduce downtime The tool uses a single Torx fastener (size M2.5x5.5) tightened with a T8 key for insert clamping, which provides a straightforward and secure retention method. With 2 cutting edges and an overall length of 41 mm, the cutter is optimised for short, controlled engagements where fast indexable-insert replacement keeps cycle times low. The compact dimensions and low mass (approx. 0.05 kg) contribute to lower centrifugal loads and make it well suited to machines with limited tool magazine capacity. Where quick changeovers are required, the simple Torx fixation minimises handling time and the risk of incorrect seating. Practical applications and workshop benefits for everyday production This screw-in tool is intended for workshops and production lines that require accurate face milling with standard APKT 1003 inserts and a robust 90° geometry. The compact form factor supports tight set-ups and confined work envelopes, while the proven insert family from Korloy provides options for finishing and general-purpose cutting. For users seeking predictable results and reduced set-up complexity, the unitary screw-in mounting and standardised insert interface make tool management more efficient and less error-prone. If further clarification on fitting or suitable insert grades is needed, Metav’s technical advisors can be consulted for application-specific guidance. For delivery, technical matching and procurement of the Teknik Makina VT136TM screw-in milling cutter contact Metav Werkzeuge for supply and expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT136TM Manufacturer: Teknik Makina Facts Diameter: 16 mm Thread: M8 Thread height: 16 mm Cutting-edge height: 25 mm Cutting angle: 90° Number of cutting edges: 2 Overall length: 41 mm Weight: 0.05 kg Torx fastener: M2.5x5.5 Torx key: T8 Compatible inserts manufacturer: Korloy Special features Screw-in mounting Compatible with APKT 1003 indexable inserts Compact design for reduced overhang Torx-secured insert clamping FAQ Which inserts are compatible with this cutter? The cutter is compatible with Korloy APKT 1003 indexable inserts; the APKT family provides a range of grades for finishing and general-purpose milling. What is the required fastening tool for insert changes? Insert clamping is secured with a Torx fastener M2.5x5.5 and requires a T8 key for correct torque application. How does the cutter’s geometry affect machining? The 90° cutting angle creates square shoulders and precise face finishes; the compact Ø 16 mm body reduces overhang for improved rigidity during short engagements. Is the cutter suitable for automated tool magazines? With an overall length of 41 mm and a mass of approximately 0.05 kg, the design is compatible with many automatic tool-change systems and smaller tool magazines. What machine applications are recommended for this type of cutter? The tool is intended for face milling and short-reach operations in small to medium series production where standard APKT 1003 inserts deliver the required surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise compatibility with APMT 0903 indexable inserts, robust M08 thread mounting and internal coolant for longer tool life; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in milling cutter VT224-1TM — 16 mm, internal coolant, for APMT 0903 indexable inserts (Teknik Makina) Screw-in milling cutter VT224-1TM for use with APMT 0903 indexable inserts, offering compact geometry and integrated coolant for stable milling performance in workshop and production settings. 16 mm diameter for compact machining Internal coolant supply to the cutting zone Compatible with Korloy APMT 0903 inserts Secure M08 thread mounting with Torx fastening Precision and rigidity that reduce rework The compact design combines a 16 mm diameter with an overall length 41 mm to offer a short overhang and improved stiffness during interrupted or light milling operations. The tool’s two cutting edges and a cutting-edge height of 25 mm provide consistent chip engagement and balanced cutting forces, which reduces vibration and the likelihood of rework. Integrated internal coolant directs fluid to the cutting zone, supporting improved tool life and more reliable surface finishes. These features translate directly into higher first-pass yield and fewer subsequent dressing or finishing operations. Quick insert changes and secure mounting for minimal downtime Designed for rapid serviceability, the cutter uses a standard M08 thread with a thread height of 16 mm to ensure positive seating and repeatable concentricity after tool changes. Insert retention is achieved with a Torx screw ( M2.5x5.5 ) requiring a Torx T8 key, enabling fast, safe replacement of inserts with minimal setup time. The lightweight construction (approx. 0.04 kg) eases handling and tool magazine management, while the simple fastening procedure helps to keep machine downtime to a minimum and increase overall equipment effectiveness. Compatibility and straightforward workshop integration The holder is made to accept APMT 0903 indexable inserts and is specified as compatible with Korloy inserts, making it easy to integrate into existing tooling inventories. The combination of internal coolant and compact geometry suits a wide range of milling tasks where APMT 0903 inserts are preferred, from semi-finish to finishing passes. Technical clarifications and application recommendations are available for those planning toolpath strategies or machine setup adjustments; practical guidance helps to align cutting parameters with the holder’s capabilities for efficient, predictable results. For availability, detailed application advice or to arrange supply of the VT224-1TM screw-in milling cutter with internal coolant, contact Metav Werkzeuge — reliable delivery from Emmerich and expert consultancy are available. Technical data Article number: VT224-1TM Label: 16mm Einschraubfräser APMT 0903 L41mm mit Innenkühlung Manufacturer: Teknik Makina SKU: VT224-1TM Core data Diameter: 16 mm Overall length: 41 mm Weight: 0.04 kg Thread: M08 Thread height: 16 mm Cutting edges: 2 Cutting-edge height: 25 mm Torx screw: M2.5x5.5 Torx key: T8 Special features Internal coolant supply For APMT 0903 indexable inserts Compatible with Korloy inserts Compact holder geometry FAQ Which inserts fit this cutter? The VT224-1TM accepts APMT 0903 indexable inserts and is specified as compatible with Korloy inserts. Is there internal coolant on the tool? Yes — the cutter provides internal coolant directed to the cutting zone to support tool life and improved surface quality. How is the cutter mounted? Mounting is via an M08 thread with a thread height of 16 mm; the insert is secured with an M2.5x5.5 Torx screw tightened using a Torx T8 key. How many cutting edges does the holder provide? The tool is equipped for two cutting edges, with a cutting-edge height of 25 mm, providing balanced engagement for stable machining. What are the identification and manufacturer details? The SKU is VT224-1TM and the tool is manufactured by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable machining performance with internal coolant and compatibility for BLMP 0603 indexable inserts ensures efficient chip evacuation and consistent surface quality; order the screw-in milling cutter directly via Metav Werkzeuge or ask our consultants for application advice. Screw-in milling cutter VT190-1TM — 16 mm diameter, internal coolant (Teknik Makina) A Screw-in milling cutter VT190-1TM engineered for secure insert clamping and high-efficiency face and shoulder milling using BLMP 0603 indexable inserts. Internal coolant for stable cutting Compatible with BLMP 0603 inserts (Taegutec) Compact 16 mm diameter, L 41 mm Two cutting edges for smooth material removal Small-diameter performance with controlled cooling The compact design delivers focused cutting power in restricted workspaces while the internal coolant channel reduces heat at the cutting zone and improves tool life. With a 16 mm diameter and an overall length of 41 mm, the tool provides a rigid cutting geometry that helps maintain dimensional accuracy during face or shoulder milling. The combination of coolant-fed cutting and a short overhang reduces chatter and improves surface finish, translating into higher first-pass yields and fewer reworks. Fast insert changes and reliable clamping for uninterrupted machining Designed for BLMP 0603 indexable inserts, the cutter features secure fixation with an M3x6.2 Torx screw tightened using a Torx T8 key, enabling quick, repeatable insert changes. The thread-in connection (thread: M08) ensures stable mounting in compatible holders and simple tool replacement without the need for specialised adapters. With two cutting edges and a cutting-edge height of 25 mm, the assembly balances metal removal rates and chip control for many common milling tasks, supporting efficient shifts in batch production. Integration into workshop workflows and consistent quality delivery Lightweight at approximately 0.044 kg and compatible with inserts from Taegutec, the tool is suited to standard small-diameter milling applications where repeatability and uptime matter. The thread-in format simplifies inventory and toolholder management in production environments, while the coolant-fed design supports longer insert life and reduced thermal distortion. For procurement and planning, the SKU VT190-1TM allows straightforward ordering and stock tracking within a centralised tool management approach. For procurement or application support for the Teknik Makina screw-in milling cutter, contact Metav Werkzeuge in Emmerich for tailored advice and to arrange supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT190-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Label: 16mm Einschraubfräser BLMP 0603 L41mm mit Innenkühlung Facts Diameter: 16 mm Overall length: 41 mm Thread height: 16 mm Thread: M08 Cutting edges: 2 Cutting height: 25 mm Weight: 0.044 kg Special features Internal coolant Compatible with BLMP 0603 indexable inserts Compatible insert manufacturer: Taegutec Torx screw: M3x6,2 Torx key: T8 FAQ What inserts fit this screw-in milling cutter? The tool is specified for BLMP 0603 indexable inserts, compatible with inserts from Taegutec for standard face and shoulder milling applications. Is the cutter coolant-fed and how does that benefit machining? Yes — the internal coolant channel supplies cutting fluid directly to the cutting zone, which reduces heat and improves insert life for the VT190-1TM screw-in milling cutter. What thread and mounting does the tool require? The cutter uses an M08 thread with a 16 mm thread height for secure mounting in suitable holders, enabling stable operation in demanding cycles. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑precision design that combines a 16 mm diameter, secure M08 screw‑in clamping and internal coolant for improved tool life and consistent cycle times; order directly via Metav Werkzeuge or consult our specialists for application advice. VT230-1TM screw-in cutter — for EPMT 0603 indexable inserts with internal coolant (Teknik Makina) The VT230-1TM screw-in cutter provides a compact, coolant-fed milling solution for operations that require quick insert changes and stable clamping in confined tool setups 16 mm diameter for compact machining Internal coolant for efficient chip removal M08 screw-in thread with 25 mm engagement Compatible with EPMT 0603 indexable inserts Consistent clamping for accurate finishes The combination of an M08 screw‑in interface and a long 25 mm engagement means the tool is designed for stable, repeatable clamping with minimal runout. A reduced radial overhang and a 16 mm body diameter contribute to lower vibration and improved surface quality, while the 2 cutting edges deliver balanced cutting forces for steady feed rates. This results in predictable tool behaviour that supports tighter tolerances and fewer reworks on batch production runs, translating directly into improved process reliability. Enhanced chip evacuation and coolant flow for longer runtimes Equipped with integrated internal coolant, the cutter directs cooling and lubrication precisely to the cutting zone, lowering temperatures and reducing built‑up edge formation. The tool accepts EPMT 0603 indexable inserts from Hitachi, allowing rapid insert replacement without compromising cutting geometry. Efficient coolant flow and focused chip control extend insert life and maintain consistent cutting performance, which helps to reduce downtime and the frequency of tool changes in medium‑ to high‑volume milling tasks. Service‑friendly design that suits busy workshop environments The compact overall length (L41 mm) and low mass (0.04 kg) make the tool simple to handle and less prone to accidental collisions in congested setups. Fast maintenance is supported by standard fastenings — Torx T8 drive and M2.5x5.5 Torx screw — enabling quick insert swaps with common workshop tools. The slim profile and straightforward assembly support efficient inventory management and minimise machine idle time, an advantage for operations aiming to maintain steady throughput without complex tool handling procedures. For specialist advice or immediate availability of the Teknik Makina VT230-1TM screw-in cutter with internal coolant, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: VT230-1TM Manufacturer: Teknik Makina Product type: Screw-in cutter Facts Diameter: 16 mm Overall length: 41 mm Thread engagement height: 25 mm Thread: M08 Weight: 0.04 kg Cutting edges: 2 Cutting-edge height: 16 mm Features Internal coolant Compatible with EPMT 0603 indexable inserts Compatible insert manufacturer: Hitachi Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this cutter? The VT230-1TM is designed for EPMT 0603 indexable inserts; compatibility with Hitachi‑made inserts is specified for consistent seating and cutting geometry. Does the tool support internal coolant? Yes, the cutter is equipped with internal coolant, supplying the cutting edge directly to assist thermal control and chip evacuation. What fastener is required to change inserts? Insert retention uses an M2.5x5.5 Torx screw and a T8 Torx key for reliable clamping and simple servicing. Is this cutter suitable for confined toolholders? The compact 16 mm diameter and L41 mm overall length make the cutter suitable for applications with limited clearance or tight tool layouts. How many cutting edges does the tool have? The design features 2 cutting edges, providing balanced cutting forces and stable material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the internally cooled design and compact 16 mm diameter for continuous, high-precision milling; the combination of secure M08 screw-in mounting and compatibility with LNMU 0303 indexable inserts ensures reliable tool life and quick changeover. Order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Screw-in milling head VT300-1TM – 16 mm diameter, internal coolant (Teknik Makina) The Screw-in milling head VT300-1TM is a compact, internally cooled cutter designed for LNMU 0303 indexable inserts, suitable for precision finishing and versatile industrial milling applications 16 mm diameter for compact milling heads Internal coolant for improved tool life Compatible with LNMU 0303 indexable inserts M08 screw-in thread, lightweight design Longer service intervals through optimised coolant and chip control The internal coolant channel directs cutting fluid close to the cutting edge, promoting effective chip evacuation and reduced thermal load. With its two cutting edges, the head delivers stable engagement and consistent surface quality, which translates into extended tool life and fewer interruptions on the shop floor. This configuration is particularly beneficial where sustained cycles and predictable machining results are required, allowing process planners to rely on steady throughput rather than frequent tool swaps. The compact form also helps maintain spindle balance during high-speed finishing. Positive clamping and compact geometry for precise results A secure M08 thread and a deliberately slim profile allow precise axial positioning and repeatable seating in compatible holders. The short 42 mm overall length and defined cutting height 25 mm support access to tighter work zones without sacrificing stability, while the low mass (0.029 kg) reduces centrifugal loads. These mechanical attributes combine to improve dimensional accuracy in serial production and to simplify fixture design. For engineers seeking consistent tolerances, the result is reduced rework and a predictable production rhythm. Broad compatibility and straightforward maintenance for production continuity Designed for LNMU 0303 style indexable inserts and compatible with Tungaloy inserts, the VT300-1TM supports widely available grades and geometries, easing inventory management and insert selection. The head is secured with a small Torx fastener (Torx T8; screw M2.5x7), which simplifies replacement and reduces downtime during index changes. Indexable tooling is explained simply by its replaceable cutting segments: when one edge wears, the insert is indexed or replaced without exchanging the entire head, preserving toolholder investment and accelerating maintenance cycles. For application advice on Teknik Makina’s internally cooled screw-in heads or to arrange delivery from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 – our specialists will advise on the best configuration for the production task at hand Technical data SKU: VT300-1TM Product: Screw-in milling head for LNMU 0303 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 16 mm Overall length: 42 mm Thread height: 17 mm Cutting height: 25 mm Weight: 0.029 kg Number of cutting edges: 2 Special features Thread: M08 Internal coolant Compatible insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x7 FAQ Which inserts fit this milling head? The VT300-1TM is designed for LNMU 0303 indexable inserts and is listed as compatible with inserts from Tungaloy for straightforward procurement and grade selection. Does the head provide internal coolant? Yes, the milling head features internal coolant to direct fluid to the cutting zone, enhancing cooling and chip evacuation for improved tool life. How is the head mounted and secured? Mounting is via the M08 screw-in thread; the insert head is fastened with a Torx T8 screw (M2.5x7), allowing secure clamping and quick servicing. How many cutting edges does the head have? This model features two cutting edges, which balance cutting efficiency with surface finish and tool life. Is this head suitable for compact setups and tight access areas? The compact 16 mm diameter and 42 mm overall length provide a reduced envelope for access in confined machining situations while maintaining secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact Ø 16 mm cutting diameter, secure M8 thread and compatibility with LNMX 0603 indexable inserts for stable, repeatable machining; order this screw-in cutter directly via Metav Werkzeuge or consult the technical team for tailored recommendations. Screw-in Cutter VT152TM – for LNMX 0603 indexable inserts, Ø 16 mm, M8 thread (Teknik Makina) Screw-in Cutter VT152TM designed for reliable insert clamping and versatile finishing and roughing with LNMX 0603 indexable inserts. *Compatible with LNMX 0603 indexable inserts *Ø 16 mm cutting diameter *M8 screw-in thread for secure mounting *Two cutting edges for stable chip removal Space-saving diameter that enables tighter toolpaths The compact Ø 16 mm body reduces interference in confined setups and allows closer approach to intricate workpieces. This reduced diameter supports efficient use in multi-tool spindle configurations and nests comfortably in fixtures where larger heads would collide. The shorter footprint is beneficial where tool change cycles and spindle clearance are limiting factors, improving process integration without sacrificing rigidity. Secure fixation and fast insert changes reduce downtime A secure M8 thread combined with an M3x7 Torx screw provides reliable clamping of the LNMX insert family, while the supplied T8 key ensures repeatable tightening. These standardized fastenings speed up insert replacement and lower the risk of incorrect seating, contributing to consistent cutting geometry and fewer stoppages. The system is designed for quick maintenance to keep production running with minimal interruption. Consistent cutting with two optimised cutting edges The dual-edge configuration delivers a balance between material removal rate and surface quality, enabling predictable tool behaviour under varied cutting parameters. Using standard LNMX 0603 indexable inserts from Korloy allows selection of appropriate grades and chipbreakers for the required material and application, so the holder supports both roughing and finishing strategies while maintaining process stability. Ready integration and supplier confidence for workshops Built to accept widely available indexable inserts, this screw-in head simplifies tool inventory and replacement logistics. The compact design and standardised fixing mean straightforward integration into existing tool systems. Combined with Metav’s emphasis on accessible precision and dependable supply from Emmerich, the component fits into an efficient procurement and service workflow for industry and craft alike. Contact Metav Werkzeuge for availability, machining recommendations and compatibility advice on the Teknik Makina screw-in cutter VT152TM; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss application details and delivery from Emmerich Technical data SKU: VT152TM Product name: Screw-in cutter for LNMX 0603 indexable inserts Manufacturer: Teknik Makina Core data Cutting diameter: 16 mm Overall length: 42 mm Thread: M8 Cutting edges: 2 Features Compatible with Korloy LNMX 0603 indexable inserts Torx screw M3x7 for insert clamping Torx key size T8 provided Indexable insert system for fast replacement FAQ What inserts fit this screw-in cutter? The cutter accepts LNMX 0603 indexable inserts; Korloy LNMX 0603 grades are compatible and can be selected to suit the workpiece material. How is the insert secured in the tool? Insertion is secured by an M3x7 Torx screw tightened with a T8 key; this ensures repeatable seating and reliable clamping for the VT152TM screw-in cutter. What are the main dimensions to consider for machine setup? Key dimensions for setup are the Ø 16 mm cutting diameter and 42 mm overall length; the tool mounts via an M8 screw-in thread. Is this tool suitable for confined or multi-tool spindles? Yes, the compact Ø 16 mm design reduces collision risk and is well suited to tight toolpaths and multi-tool arrangements. Which manufacturer produces this item? The tool is supplied by Teknik Makina and sold through the Metav distribution channel under SKU VT152TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant and straightforward M08 screw mounting for reliable small-diameter milling operations; order the cutter directly via Metav Werkzeuge or consult our advisors for application-specific guidance. 16 mm screw-in cutter VT310-1TM – for LOGU 0303 indexable inserts, internal coolant (Teknik Makina) The 16 mm screw-in cutter VT310-1TM is a compact milling head engineered for precision work with LOGU 0303 indexable inserts, offering internal coolant and robust M08 mounting for tight-tolerance applications. 16 mm cutting diameter Internal coolant for controlled chip flow Compatible with LOGU 0303 inserts (Kyocera) M08 screw mounting with Torx T8 drive Compact precision for small milling tasks The VT310-1TM screw-in cutter delivers a combination of compact geometry and stable support that benefits small-batch and precision machining. With a 16 mm diameter and a 46 mm overall length, the head minimises overhang while providing a 30 mm cutting height across its two-flute design. This reduces bending and vibration, which translates into more consistent surface finishes and tighter dimensional repeatability on components where space and accuracy matter. Controlled cooling and improved tool life Equipped with internal coolant, this milling head guides cutting fluid directly to the cutting zone for efficient heat dissipation and enhanced chip evacuation. The internal supply helps to limit thermal growth and prevent built-up edge, extending the life of the indexable inserts and maintaining cutting performance over longer cycles. In practice, this means fewer tool changes and steadier process parameters for longer production runs. Straightforward compatibility and serviceability Designed for LOGU 0303 indexable inserts and compatible with inserts from Kyocera, the tool uses a simple M08 screw clamping system and a Torx T8 drive for secure assembly. The insert is retained by an M3x7 Torx screw, enabling quick and reliable replacements with standard workshop tools. Such a configuration reduces downtime during maintenance and simplifies stock management by allowing the use of widely available insert types. Ideal for precision toolrooms and flexible production The compact cutter suits precision toolrooms, contract manufacturers and workshops that require reliable small-diameter milling without complex set-ups. Lightweight at 0.03 kg, the head contributes minimal mass to the toolholder, helping to preserve spindle dynamics and reduce wear. The combination of easy insert replacement, internal coolant and a robust M08 interface makes this tool a practical choice where repeatability and process stability are priorities. Contact Metav Werkzeuge today for tailored advice on Teknik Makina cutters and to discuss how the VT310-1TM can be integrated into existing machining setups — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: VT310-1TM Product type: Screw-in cutter (Einschraubfräser) Brand: Teknik Makina Compatible inserts: LOGU 0303 indexable inserts Label: 16mm screw-in cutter LOGU 0303 L46mm with internal coolant Facts Diameter: 16 mm Overall length: 46 mm Thread height: 16 mm Thread: M08 Cutting height: 30 mm Cutting edges: 2 Weight: 0.03 kg Torx key: T8 Torx screw: M3x7 Special features Internal coolant Compatible with Kyocera inserts Two-flute design M08 mounting interface Compact, lightweight construction FAQ Is this cutter compatible with LOGU 0303 inserts? Yes. The VT310-1TM is specified for LOGU 0303 indexable inserts and supports inserts from Kyocera. Does the tool provide internal coolant? Yes. The cutter features internal coolant to direct fluid to the cutting zone for improved chip evacuation and thermal control. What is the mounting thread and how is the insert secured? The tool mounts with an M08 thread; the insert is secured using an M3x7 Torx screw driven with a T8 Torx key. How many cutting edges does the head have? The cutter is a two-flute design, offering a balance between chip clearance and surface finish. What are the key dimensions to consider for set-up? Important dimensions include a 16 mm diameter, 30 mm cutting height and 46 mm overall length. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, reliable mounting and fast insert changes for efficient, repeatable milling operations; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. VT310TM 16 mm screw-in cutter (Ø 16 mm) by Teknik Makina — for LOGU 0303 indexable inserts VT310TM 16 mm screw-in cutter for LOGU 0303 indexable inserts, designed for compact machining tasks and precise insert positioning across small toolpaths. Ø 16 mm compact cutter for tight toolpaths Secure M08 thread for stable mounting Compatible with LOGU 0303 Kyocera inserts Two cutting edges for balanced machining Precision in a compact format for tight toolpaths The VT310TM is engineered as a screw-in milling cutter with a compact Ø 16 mm body and 46 mm overall length, offering a tight footprint for operations where space is limited. The small diameter supports narrow machining corridors and close-proximity features without sacrificing stability. The design delivers consistent radial run-out and repeatability, which is essential for multi-pass finishing or high-volume component series where dimensional conformity is demanded. Consistent cutting performance with indexable inserts Compatibility with LOGU 0303 indexable inserts (made for Kyocera) means the head provides predictable cutting behaviour and easy refresh of cutting edges. Indexable inserts concentrate wear on a replaceable component rather than the body, lowering life-cycle costs and downtime. The tool features two cutting edges, which balance chip load and reduce vibration during light- to medium-duty milling, producing smoother surface finishes while maintaining economical insert usage. The concept of indexable tooling simplifies process control: when an insert edge dulls, a quick index or replacement restores cutting quality. Secure mounting and straightforward insert change procedure Robust clamping is achieved via the M08 thread, ensuring a rigid connection to compatible holders and minimising micro-movement under load. Insert fixation uses a Torx T8 tool and M3x7 screw for straightforward, secure replacement; this standardised fastening method reduces setup time and supports consistent torque application. The cutter’s construction keeps maintenance routines simple — spare screws and a single Torx key cover common service needs, helping to keep machines productive and changeover predictable. Ideal uses and where value is realised The screw-in head is suited to machining scenarios that require small-diameter cutters with repeatable positioning: pocketing in compact components, finishing of narrow slots, and detail milling where tool accessibility is constrained. The combination of compact geometry, indexed insert economy and secure M08 interface supports lean tool management and predictable machining output. For shops consolidating tooling, this head complements modular holder systems and enables efficient stockkeeping of commonly used insert types. For tailored application advice or to secure the Teknik Makina VT310TM screw-in cutter from Metav Werkzeuge, contact the Emmerich team for specification support and reliable fulfilment — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT310TM Label: 16mm Einschraubfräser LOGU 0303 L46mm Manufacturer: Teknik Makina Core measurements Diameter: 16 mm Overall length: 46 mm Weight: 0.03 kg Thread height: 16 mm Cutting-edge height: 30 mm Cutting edges: 2 Compatibility & features Thread: M08 Compatible inserts: LOGU 0303 indexable inserts Compatible insert maker: Kyocera Torx key: T8 Torx screw: M3x7 FAQ Which insert type is required for this cutter? The cutter accepts LOGU 0303 indexable inserts, compatible with Kyocera-manufactured grades, allowing fast reuse of multiple cutting edges per insert. How is the tool mounted in the holder? Mounting is via an M08 thread; the screw-in interface secures the head to a matching clamping system for minimal run-out and stable milling. How many cutting edges are fitted and what is the machining effect? The head uses two cutting edges, offering balanced chip removal and reduced vibration, suitable for fine finishing and steady axial engagement. What tools are needed to change an insert? Insert fixation uses a Torx T8 driver and an M3x7 screw, which simplifies changeovers and keeps replacement steps uniform across the workshop. Is the cutter suitable for tight or deep pockets? The compact Ø 16 mm body and 46 mm overall length make the tool well suited to narrow pockets and close-feature milling where accessibility and precise positioning are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, screw-in cutter that combines a 15° cutting angle with a 16 mm diameter for improved surface finish and low cutting forces; fitted for APMT 0903 indexable inserts and supplied with an M2.5x5.5 Torx screw for secure clamping. Order the tool directly via Metav Werkzeuge or consult their specialists for application advice. Screw-in cutter VT224TM – for APMT 0903 indexable inserts, 15° cutting angle (Teknik Makina) The screw-in cutter VT224TM is a compact milling solution designed for finishing and general steel machining with APMT 0903 indexable inserts, offering a balance of rigidity and accessibility in confined setups Compact 16 mm diameter design 15° cutting angle for fine finishing M8 thread, 25 mm engagement Compatible with APMT 0903 Korloy inserts Lightweight 0.04 kg for easy handling Higher-quality finishes with reduced cutting forces A small radial approach is achieved through the 15° cutting angle, which reduces engagement stress and supports smoother transitions on machined surfaces. The 16 mm diameter combined with two cutting edges enables a controlled finish pass rather than aggressive stock removal, so cycle times are optimised when a high surface quality is required. In practical terms, this geometry lowers the risk of chatter and improves tool life, particularly in interrupted or shoulder milling where stability is paramount. Reliable clamping and straightforward assembly Secure fixation is ensured by the M8 thread with 25 mm engagement and the supplied M2.5x5.5 Torx screw, tightened with a T7 key, giving predictable clamping repeatability for indexable inserts. The low mass of 0.04 kg minimises centrifugal load at higher spindle speeds and simplifies handling during tool changes. These features translate into faster set-ups and fewer corrective adjustments on the machine, reducing downtime and supporting steady production flow. Broad compatibility for workshop flexibility Designed for use with APMT 0903 indexable inserts and compatible with Korloy grades, the tool supports common insert choices for steel machining and finishing operations. The tool’s overall length of 41 mm and a cutting height of 16 mm make it suitable for compact toolholders and tight-stack assemblies without sacrificing cutting capacity. When combined with appropriate insert selection, the system offers consistent chip formation and efficient material removal in finishing cycles. For procurement and tailored technical guidance on the Teknik Cutting Tools screw-in cutter VT224TM, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: VT224TM Brand: Teknik Makina For inserts: APMT 0903 Numeric specifications Diameter: 16 mm Total length: 41 mm Thread: M8 Thread engagement/height: 25 mm Cutting height: 16 mm Number of cutting edges: 2 Cutting angle: 15° Weight: 0.04 kg Torx screw: M2.5x5.5 Special features Compatible with Korloy inserts Supplied with Torx screw for secure clamping Compact screw-in mounting for tight tool arrangements Suited for steel machining and finishing FAQ Which inserts fit this cutter? The VT224TM is designed for APMT 0903 indexable inserts and accommodates common Korloy grades for finishing applications. What is the cutter diameter and length? The tool has a 16 mm diameter and a total length of 41 mm, offering a compact profile for close-tolerance setups. How is the insert secured? Clamping is achieved with an M2.5x5.5 Torx screw (T7 key), providing repeatable fixation for the insert in the M8 screw-in body. Is the tool suitable for steel machining? Yes, the VT224TM is intended for high-quality steel machining and finishing when paired with appropriate inserts. What advantages does the 15° cutting angle provide? A 15° approach reduces radial cutting forces, improving surface finish and lowering the likelihood of vibration during finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact M8 screw‑in cutter with a 93° cutting angle and compatibility for EPMT 0603 indexable inserts. Combines precise shoulder milling, quick insert changes and a lightweight design for efficient tool handling — order the VT230TM directly via Metav Werkzeuge or consult our specialists for application advice. Screw‑in cutter VT230TM — M8 mounting, Ø16 mm, for EPMT 0603 indexable inserts (Teknik Makina) The Screw‑in cutter VT230TM is a compact screw‑in milling head designed for shoulder and face milling with EPMT 0603 indexable inserts in general workshop and production environments. M8 screw‑in mounting Compatible with EPMT 0603 inserts 93° cutting angle for shoulder milling Lightweight 0.04 kg for easy handling Precision and compatibility that keep production moving The VT230TM is engineered to deliver consistent results in repeatable milling operations. Its M8 screw‑in mounting ensures a secure fixation, while the Ø16 mm body and two cutting edges are optimised for controlled material removal. Compatibility with EPMT 0603 indexable inserts — specifically those from Hitachi — simplifies stock management and shortens setup time. The 93° cutting angle is beneficial where a near‑square shoulder is required: the geometry supports stable cutting forces and predictable surface finish, which helps maintain throughput across serial production runs. Fast tool changes and straightforward maintenance Designed with workshop efficiency in mind, the head is secured using a Torx M2.5x5.5 screw that is tightened with a T7 key. This standardised fastening method enables quick insert indexing and minimal downtime during changeovers. The screw‑in thread length of 25 mm provides a robust engagement with the holder, while the modest overall length of 41 mm keeps the assembly compact. Service tasks are therefore straightforward and can be integrated easily into regular maintenance cycles without complex tooling. Designed for repeatable shoulder and face milling With two cutting edges and a defined cutting height of 16 mm, the cutter is suited to operations where accuracy and repeatability matter. The head geometry reduces vibration and distributes cutting loads evenly across the insert seat, which supports longer insert life under comparable conditions. Because the tool is based on a universal indexable insert system, replacement inserts can be sourced quickly, ensuring process continuity and easing procurement for production lines that require predictable supply chains. Lightweight build for ergonomic workshop use and reliable handling At only 0.04 kg, the VT230TM is exceptionally light, which reduces strain when operators handle tool changes and when balancing turret or spindle assemblies. The compact diameter and restrained mass mean the tool is well suited to applications where minimised overhang is advantageous. Combined with the proven mounting standard and insert compatibility, this milling head offers a practical blend of precision, ease of use and operational reliability for workshops and small production facilities alike. For expert guidance on integrating the Teknik Makina screw‑in cutter VT230TM into existing setups, and for prompt delivery from Emmerich, contact Metav Werkzeuge for tailored advice and order support Technical data SKU: VT230TM Name: Screw‑in cutter (Einschraubfräser) For: EPMT 0603 indexable inserts Compatible insert manufacturer: Hitachi Core data Diameter: 16 mm Overall length: 41 mm Thread: M8 Thread length: 25 mm Cutting height: 16 mm Cutting angle: 93° Cutting edges: 2 Weight: 0.04 kg Special features Torx screw: M2.5x5.5 Torx key size: T7 Screw‑in mounting design Suitable for EPMT 0603 indexable inserts FAQ Which indexable inserts fit this cutter? The VT230TM is specified for EPMT 0603 indexable inserts; compatibility with Hitachi EPMT 0603 grades is indicated in the product data. What is the mounting thread and how deep is the engagement? The cutter uses an M8 mounting thread with a thread length of 25 mm for secure engagement. How many cutting edges does the head have and what is the cutting angle? This screw‑in milling head features two cutting edges and a 93° cutting angle, optimised for shoulder and face milling. Which fastening parts are used for the insert? Assembly requires a Torx M2.5x5.5 screw and a T7 Torx key to secure the insert and clamping components. Is the VT230TM suitable for compact turret or spindle assemblies? Yes — the compact Ø16 mm diameter and 41 mm overall length make the VT230TM well suited to confined spaces and compact toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-precision screw-in cutter body that combines a Ø 16 mm diameter, M8 thread and four cutting edges for stable milling and consistent chip control; order directly via Metav Werkzeuge or consult our specialists for application advice. VT222TM screw-in cutter body – Screw-in milling cutter, Ø 16 mm, M8 thread (Teknik Makina) VT222TM screw-in cutter body designed for short overhang milling and indexable insert use in precision workshops and small-scale production Compact Ø 16 mm screw-in body Secure M8 thread mounting Four cutting edges for chip control Torx screw M1.8×4.1, key T6 Small diameter, big impact on process stability The VT222TM is engineered as a compact screw-in cutter body with a Ø 16 mm shank that reduces overhang-induced vibration and improves surface finish in constrained setups. The combination of a short 42 mm overall length and a lightweight construction (0.03 kg) lowers centrifugal and bending forces, which directly translates into longer insert life and fewer rejects. By using a robust M8 thread for mounting, the tool offers a stable mechanical interface with the holder; this stability is particularly relevant when aiming for repeatable results in series machining or when working with thin-walled components where chatter must be avoided. Secure clamping and straightforward insert changes Clamping is handled via a precisely specified Torx screw M1.8×4.1 and a T6 key drive, ensuring consistent seating of the indexable insert and minimising runout. The design with four cutting edges supports balanced cutting forces, improving chip evacuation and reducing heat concentration at the cutting zone. For maintenance, the simple Torx connection allows fast insert exchange and repeatable reassembly without specialised tools, which shortens machine downtime and keeps production moving. The engineering choice of standardised fastenings also simplifies spare-part handling for workshop technicians. Compatibility, applications and workshop advantages This screw-in cutter body is intended for use with indexable inserts and is listed for use with APMT 0602 style inserts, offering a familiar geometry for many carbide grades and manufacturers such as Korloy. In practice, the tool suits finishing and semi-finishing operations on a wide range of materials where a compact tool body provides an advantage: small-batch work, fixtured components, and multi-axis setups with limited clearance. The robust thread and clamping system contribute to predictable tool performance, which supports cost-effective production planning and inventory control when combined with Metav’s dependable supply chain. For procurement or technical guidance on the Teknik Makina VT222TM screw-in cutter body, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — to discuss compatibility and delivery options Technical data Article number: VT222TM Manufacturer: Teknik Makina eClass: 21180806 Facts Diameter: 16 mm Thread: M8 Overall length: 42 mm Weight: 0.03 kg Cutting edges: 4 Special features Torx screw: M1.8x4.1 Torx key: T6 Suitable for indexable inserts: for APMT 0602 Indexable Inserts Compatible insert manufacturer: Korloy FAQ What insert type fits this cutter body? The VT222TM screw-in cutter body accepts indexable inserts specified as for APMT 0602; the geometry is compatible with standard APMT-style inserts and common grades supplied by manufacturers such as Korloy. Which fastening is used to secure the insert? Clamping is effected with a Torx screw M1.8×4.1 driven with a T6 key, ensuring repeatable seating and straightforward maintenance for the VT222TM cutter body. Is the VT222TM suitable for long-overhang milling? The VT222TM is optimised for short overhang situations; its Ø 16 mm body and 42 mm overall length reduce bending moments and are best for applications where minimising vibration is important. What production benefits does the compact design deliver? A smaller-diameter cutter body reduces deflection and improves surface finish; the VT222TM’s lightweight design (0.03 kg) and balanced four cutting edges support stable cutting and longer insert life. Can this cutter body be used with Korloy inserts? Yes; the VT222TM is compatible with inserts from Korloy that match the APMT 0602 style, providing flexibility in grade selection for different materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

A compact, high-performance screw-in milling head combining a 16 mm cutting diameter with internal coolant provides improved chip control and prolonged insert life. With a secure M08 thread and compatibility for APXT 1003 indexable inserts from Korloy, machining setups benefit from fast changeovers and consistent results — order directly via Metav Werkzeuge or contact their specialist team for integration support. VT136-1TM screw-in milling cutter — 16 mm, internal coolant, for APXT 1003 inserts (Teknik Makina) The VT136-1TM screw-in milling cutter is designed for indexable-insert milling applications using APXT 1003 inserts, offering a compact 41 mm overall length and integrated coolant for improved process stability. 16 mm cutting diameter Internal coolant for better chip evacuation Compatible with APXT 1003 Korloy inserts M08 thread for secure screw-in mounting Stable chip control for consistent surface quality The integrated internal coolant channel supplies lubricant and coolant directly to the cutting zone, reducing heat at the edge and aiding chip evacuation. This results in fewer built-up edges and a more reliable surface finish during serial production. The compact 41 mm overall length reduces overhang, which helps to limit vibration and maintain dimensional accuracy across a run. For applications where repeatability matters, the combination of coolant-fed cutting and a short tool projection supports stable machining and predictable cycle times. Secure mounting and fast insert changes to reduce downtime A robust M08 screw-in connection with a defined thread height of 16 mm ensures positive seating and repeatable concentricity. The head accepts APXT 1003 indexable inserts, supplied by Korloy, enabling rapid index changes and minimal tool change time. The assembly uses a Torx fixing system (Torx T8) with the specified screw M2.5x5.5, so maintenance routines are straightforward and repeatable. These design choices focus on economic operation: shorter tool-change intervals and reliable clamping reduce unproductive time on the shop floor. Balanced cutter geometry for efficient material removal Equipped with two cutting edges, the milling head balances removal rate and surface quality for general-purpose milling tasks. The specified cutting-edge height of 25 mm delivers adequate edge exposure for stable cutting engagement without excessive overhang. The 16 mm diameter suits medium-finish operations where compact tooling provides better access and control. In production contexts, fewer oscillations and steady chip formation contribute to longer insert life and lower frequency of rework. Practical serviceability and integration into existing toolchains The tool’s light weight (0.05 kg) and standardised interface make it a straightforward addition to existing holders and tool magazines. Internal coolant and standard insert compatibility simplify stock handling, while the clear specification of fastening components supports predictable maintenance. Documentation of the key assembly parts — Torx T8, screw M2.5x5.5 and the M08 thread — ensures spare parts are easily identified and ordering routines remain efficient. The result is a milling solution geared towards consistent throughput and low process variability. Contact Metav Werkzeuge for implementation advice and delivery options for the Teknik Makina VT136-1TM; Metav’s specialists will confirm insert compatibility and help specify the correct holder and coolant routing for seamless integration. Technical data SKU: VT136-1TM Product type: screw-in milling cutter Manufacturer: Teknik Makina eClass: 21180806 Core specifications Diameter: 16 mm Overall length: 41 mm Weight: 0.05 kg Thread: M08 Thread height: 16 mm Number of cutting edges: 2 Cutting-edge height: 25 mm Torx key: T8 Torx screw: M2.5x5.5 Features and compatibility Internal coolant Compatible with APXT 1003 indexable inserts Compatible insert manufacturer: Korloy Screw-in mounting system Category: screw-in milling cutter FAQ Which inserts fit this milling head? The VT136-1TM is specified for APXT 1003 indexable inserts; Korloy inserts in this designation are directly compatible. Does the tool support coolant-through operation? Yes — the tool features internal coolant, supplying coolant close to the cutting edge to assist chip evacuation and thermal management. What is the mounting thread and how is it fastened? The head uses an M08 screw-in thread with a thread height of 16 mm and is secured with the Torx system (Torx T8) using screw M2.5x5.5. How many cutting edges does the head have and what is the edge height? The cutter provides two cutting edges with a cutting-edge height of 25 mm for balanced material removal and finish. Is the VT136-1TM suitable for reduced overhang setups? Yes — the compact overall length of 41 mm is intended to minimise overhang, improving rigidity and reducing vibration during milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise compatibility with LNMU 0303 indexable inserts and the compact Ø 16 mm design for efficient toolholding; the screw-in solution with M8 thread and quick Torx fastening reduces changeover time and supports steady production. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. Screw-in milling cutter VT300TM – screw-in cutter for LNMU 0303 indexable inserts, Ø 16 mm, M8 thread (Teknik Makina) A screw-in milling cutter designed for reliable turning and light milling operations using LNMU 0303 indexable inserts, suited to small to medium batch production and workshop retrofit applications Screw-in design for quick tool change Compatible with LNMU 0303 inserts Ø 16 mm shank, M8 thread Durable two-edge cutting geometry Proven compatibility that simplifies tooling inventories The compact holder is engineered specifically for LNMU 0303 indexable inserts from TNGLY‑OKE, which allows standardisation across tooling racks and reduces the need for multiple adapter sizes. By pairing a standard insert format with a screw-in holder, the system minimises inventory complexity, shortens setup time and ensures consistent seating of cutting edges. This approach benefits production planners who require predictable tool life and repeatable component quality, especially when machining short-run parts. Fast, secure clamping for uninterrupted machining A screw-in connection with M8 thread delivers a secure interface with the machine spindle and toolpost, while the supplied fastening concept—Torx screw M2.5x7 tightened with a T8 key—ensures repeatable torque and stable clamping. The compact fastening arrangement reduces the risk of loosening under intermittent loads, which helps to maintain cutting stability and reduces scrap rates. Quick changeover capability supports lean workflows and lowers non-productive time between operations. Two-edge geometry for consistent surface finish and chip control The holder presents a two cutting edge arrangement that promotes balanced cutting forces and improved surface quality on turned and face-turned features. With a Ø 16 mm effective diameter and a 42 mm overall length, the design limits overhang and vibration while providing adequate access for most standard profiles. Balanced geometry and short overhang translate directly into more predictable tool life and a better finish, particularly on small-diameter parts where rigidity is key. Sourced reliability and partner-supported supply Produced by Teknik Makina and listed as VT300TM, the component is suitable for workshops seeking a compact, compatible holder for LNMU inserts. Supplied through Metav, customers benefit from a tested distribution channel and a partner that focuses on making precision accessible—backed by an extensive product range and structured logistics from Emmerich. The result is dependable availability and support that helps maintain machine uptime and process stability across serial manufacturing. For procurement or application advice on Teknik Makina screw-in holders including the VT300TM, contact Metav Werkzeuge in Emmerich for specification matching and delivery coordination — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT300TM Manufacturer: Teknik Makina Eclass: 21180806 ETIM: EC011860 Diameter: 16 mm Thread: M8 Overall length: 42 mm Cutting edges: 2 Suitable for: LNMU 0303 indexable inserts Compatible insert manufacturer: TNGLY-OKE Torx screw: M2.5x7 Torx key size: T8 FAQ Which insert type fits this holder? The holder accepts LNMU 0303 indexable inserts; compatibility with TNGLY‑OKE inserts is specified for the VT300TM. What is the shank diameter and thread specification? The VT300TM features an effective Ø 16 mm shank and an M8 screw-in thread. Which fastening hardware is required for assembly? Fastening is achieved with a Torx screw M2.5x7, tightened using a T8 key for repeatable clamping. Is the holder suitable for heavy interrupted cuts? The compact design and short overall length (42 mm) favour rigidity; however, for heavily interrupted cutting a more robust system may be recommended depending on specific cutting parameters. How does Metav support bulk or repeat orders of this tool? Metav can coordinate regular supply and advise on stocking strategies to match production needs for items such as the VT300TM and compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from reliable clamping, straightforward indexable-insert compatibility and compact design for efficient turning operations; order via Metav Werkzeuge or consult our specialists for tailored technical advice. SDJC for DCMT Indexable Inserts – SDJCR 1616 right-hand tool holder by Teknik Makina The SDJC for DCMT Indexable Inserts is a right-hand turning tool holder designed to accept DCMT 0702 inserts and to deliver secure clamping and predictable cutting performance in general turning applications. SDJCR 1616 holder, 16 × 16 mm Compatible with DCMT 0702 indexable inserts Right-hand cutting with 93° cutting angle Torx clamping screw M2.5×5.5, T8 key Precise turning throughput with proven geometry The clamp body is engineered to provide a consistent cutting presentation. With a 16 × 16 mm shank cross-section and a 20 mm cutting-head width the holder maintains rigid support under intermittent and continuous cuts; this reduces tool deflection and improves surface finish. The incorporated 93° cutting angle is suited to a wide range of external turning tasks and helps deliver repeatable chip control when paired with the recommended insert format. The result is a measurable improvement in process stability and part tolerance without complex set-ups. Fast changeover and dependable clamping Assembly and insert replacement are designed for efficiency: the clamping screw specification M2.5×5.5 and the required T8 Torx key provide a secure, tamper‑resistant hold while enabling rapid indexing of the insert. The holder’s overall length of 100 mm and low mass (0.2 kg) help to reduce inertial loads during acceleration and deceleration, which in turn shortens cycle-to-cycle settling. Fewer adjustments and quicker insert changes lead to less downtime and higher effective machine availability. Built for everyday workshop reliability Identified under the ISO-style mark SDJCR 1616, this indexable-insert holder is compatible with common turning set-ups and mounting shanks (designation H07). Right-hand operation is indicated for standard lathe orientations. The compact envelope—with an overall height of 16 mm and a cutting height of 18 mm—means easier integration into tight tool posts and multi-station turrets. Sourcing through Metav Werkzeuge adds an extra layer of quality assurance: stock is managed from Emmerich with a focus on consistent supply and verified parts for European workshops. Contact Metav Werkzeuge for supply of the Teknik Makina SDJCR 1616 tool holder and receive precise technical guidance from our consultants in Emmerich Technical data Article number: D221TM ISO designation: SDJCR 1616 Manufacturer: Teknik Makina Core data Holder width: 16 mm Holder height: 16 mm Cutting-head width: 20 mm Cutting height: 18 mm Overall length: 100 mm Overall height: 16 mm Weight: 0.2 kg Cutting angle: 93° Special features Compatible with DCMT 0702 indexable inserts Right-hand cutting direction Torx clamping screw M2.5×5.5 Torx key size: T8 Mounting shank designation: H07 FAQ Which insert size fits this holder? The holder accepts DCMT 0702 indexable inserts; compatibility and seat orientation are specified for that insert format. Is the holder suitable for left-hand turning? This tool holder is configured for right-hand cutting; left-hand versions must be selected separately. What is the ISO designation for ordering? Ordering can reference the ISO-style mark SDJCR 1616 or the article number D221TM for clarity. Which screw and key are required for clamping? Clamping uses an M2.5×5.5 Torx screw and requires a T8 Torx key for tightening and insert indexing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise clamping, integrated internal coolant and compact 100 mm length for consistent turning results; the holder’s ISO SDJCL 1616 form factor and compatibility with DCMT 0702 inserts ensure fast tool changes and predictable cutting geometry — order via Metav Werkzeuge or request application advice from our consultants. Clamp holder SDJC for DCMT indexable inserts (SDJCL 1616) — left‑hand clamp holder with internal coolant by Teknik Makina A left‑hand clamp holder SDJC for DCMT indexable inserts engineered for secure seating of DCMT 0702 inserts in turning operations, offering integrated coolant delivery and a compact, rigid design for repeatable machining Left‑hand cutting orientation Integrated internal coolant supply Compatible with DCMT 0702 inserts ISO SDJCL 1616 compact design Higher process stability through internal coolant The integrated internal coolant channel directs cutting fluid directly to the cutting edge, reducing temperature at the tool–workpiece interface and improving chip control. This targeted cooling translates into longer insert life and more consistent surface finish in interrupted cuts or heavy feed conditions. For shops machining mixed steels, the coolant feed is particularly effective at preventing heat‑related wear and maintaining dimensional stability across series runs. Secure clamping and compact rigidity for predictable results A compact ISO SDJCL 1616 mounting form provides a short overhang and high rigidity, which lowers vibration and supports tight tolerances. The holder’s 16 mm section (width and head height) and robust construction help maintain the set cutting geometry, so insert seating remains repeatable after index changes. The left‑hand orientation and defined 93° cutting angle are engineered to work predictably with standard turning cycles, offering straightforward programming and minimised rework. Fast setup and serviceable fasteners for efficient shop workflows Assembly is simplified by the Torx clamping screw (M2.5×5.5) and compatible T8 key, meaning secure insert clamping with a single fastener action. The holder accepts DCMT 0702 inserts and is designed for integration on the H07‑F‑IC boring bar type, enabling rapid retrofit into existing toolpacks. The combination of a clear ISO designation and standard fastener sizes reduces setup time and spare‑part complexity for production lines. Compact dimensions, lightweight handling and broad applicability With an overall length of 100 mm, total height 16 mm and a nominal weight of 0.21 kg, the holder balances stiffness with manageable mass for multi‑axis turrets and tool posts. The 27 mm cutting height and 16 mm cutting‑head width make this a flexible option for general turning tasks where small to medium‑sized DCMT inserts are preferred. Its compatibility with internal coolant and standard mounting geometry suits both individual workshops and series production environments seeking a reliable, repeatable clamping solution. Consult Metav Werkzeuge for tailored application advice and rapid supply of Teknik Makina clamp holders with internal coolant and ISO SDJCL 1616 compatibility Technical data Article number: AP574TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina SKU: AP574TM ISO designation: SDJCL 1616 Compatible inserts: DCMT 0702 Boring bar designation: H07‑F‑IC Cutting direction: left‑hand Internal coolant: yes Facts Overall length: 100 mm Overall height: 16 mm Clamp width: 16 mm Cutting‑head width: 16 mm Cutting height: 27 mm Cutting angle: 93° Weight: 0.21 kg Torx screw: M2.5×5.5 Torx key: T8 Special features Internal coolant channel Left‑hand cutting orientation Accepts DCMT 0702 inserts ISO SDJCL 1616 compact form Suits H07‑F‑IC boring bars FAQ What inserts fit this clamp holder? The clamp holder accepts DCMT 0702 indexable inserts; the geometry and clamping arrangement are specified for that insert size and shape. Is the holder suitable for internal coolant through the tool? Yes, the holder is supplied with internal coolant capability to feed cutting fluid directly to the insert edge. Which direction of cut is intended for this toolholder? This is a left‑hand cutting holder, designed for negative‑hand or left‑hand turning operations. What are the main mounting and fastener specifications? The clamping screw is M2.5×5.5 and the required Torx key size is T8, enabling secure and repeatable insert clamping. Can this holder be used on common boring bars? The holder is listed for use with the H07‑F‑IC boring bar designation and the ISO SDJCL 1616 form factor, facilitating integration into compatible tool setups. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a left-hand clamping system with internal coolant and secure retention for DCMT 0702 inserts — offering stable machining, straightforward insert changes and reliable shop-floor performance; order the SDJCL 1616 clamping holder directly via Metav Werkzeuge or ask the consultants for integration guidance. SDJCL 1616 SDJC clamping holder for DCMT inserts — left-hand, internal coolant (Teknik Makina) The SDJCL 1616 SDJC clamping holder is a left-hand turning toolholder designed for DCMT 0702 indexable inserts, combining compact dimensions with an internal coolant feed for improved chip control and tool life Left-hand cutting orientation Internal coolant feed Compatible with DCMT 0702 inserts ISO designation SDJCL 1616 Stable cutting performance for repeatable turning The holder delivers a stable clamping solution with a tool shank height and width of 16 mm, ensuring consistent seating and minimal vibration during left-hand operations. Compatibility with DCMT 0702 inserts provides a widely available insert format for varied turning tasks, while the 93° cutting angle supports predictable chip flow and reliable surface finish. This combination reduces setup variability and supports efficient production cycles by maintaining consistent cutting geometry. Coolant-fed design to extend insert life and improve finishes An integrated internal coolant channel supplies lubricant and coolant directly to the cutting edge, lowering cutting temperatures and aiding chip evacuation. The coolant-fed arrangement helps to extend tool life, reduce built-up edge formation and stabilise surface quality on batch work. For workshops seeking measurable improvements in cycle stability and repeatability, the internal coolant capability delivers a technical advantage over externally cooled setups, particularly on longer runs or tougher materials. Fast, shop-compatible mounting and secure retention Engineered for practical use on the shop floor, the holder uses a Torx M2.5x5.5 clamping screw with a T8 key for straightforward insert changes and secure retention. The assembly has an overall length of 100 mm, a cutting-head width of 20 mm and a compact mass of 0.21 kg, balancing rigidity with accessibility in confined toolpost arrangements. Compatibility with the H07-IC boring-bar designation allows simple integration into existing tool inventories while the ISO mark SDJCL 1616 simplifies ordering and replacement management. Contact Metav Werkzeuge for tailored advice on integrating Teknik Makina SDJCL 1616 clamping holders with internal coolant into existing toolsets and to arrange supply or technical recommendations Technical data Article number: AP566TM Designation: SDJC for DCMT Indexable Inserts (SDJCL 1616) Manufacturer: Teknik Makina Core specifications Width: 16 mm Height: 16 mm Cutting-head width: 20 mm Overall length: 100 mm Total height: 16 mm Cutting height: 27 mm Weight: 0.21 kg Cutting angle: 93° Cutting direction: left Clamping screw: M2.5x5.5 Torx key: T8 Features & compatibility Internal coolant feed Fits DCMT 0702 inserts Boring-bar designation: H07-IC ISO designation: SDJCL 1616 Left-hand turning holder Suitable for indexable insert turning FAQ Is this holder compatible with DCMT 0702 inserts? Yes. The SDJCL 1616 is specified for DCMT 0702 indexable inserts and secures them in a left-hand configuration while supplying internal coolant. Can the same holder be used for right-hand turning? No. This clamping holder is designed for left-hand cutting; right-hand operations require the corresponding right-hand holder variant. What are the key dimensions and weight? Main dimensions: 16 mm width and height, 100 mm overall length, 20 mm cutting-head width; weight approximately 0.21 kg. Does the toolholder provide internal coolant? Yes. The design includes an internal coolant channel to direct coolant to the cutting zone, improving tool life and surface finish. Which screw and key are required for insert changes? Insert fastening uses a Torx M2.5x5.5 screw and a T8 Torx key for secure, repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision clamping solution that combines internal coolant delivery with robust clamping geometry to extend insert life and maintain stable cuts. The holder’s compatibility with DCMT 0702 indexable inserts and its ISO designation SDJCR 1616 ensure quick tool changes and predictable set-up. Order the clamping holder directly via Metav Werkzeuge or ask the consultants for application advice. AP570TM — SDJC for DCMT indexable inserts, flat turning holder (Teknik Makina) The AP570TM is a flat-style turning holder designed for secure clamping of DCMT 0702 indexable inserts in standard right-hand turning applications. Internal coolant channel for reliable chip evacuation Compatible with DCMT 0702 indexable inserts Right-hand cutting orientation for standard turning 16 × 16 mm carbide seat and cutting head 100 mm overall length for stable setup Faster production through coolant-fed cutting and longer tool life The holder features an integrated internal coolant channel that directs coolant precisely to the cutting zone. This targeted cooling reduces local temperatures and improves chip control, which in turn contributes to longer insert life and fewer unscheduled stoppages. For machining operations that require consistent surface finish and repeatable cycle times, the combination of coolant delivery and a rigid clamping concept helps to maintain process stability and reduce scrap rates. Predictable geometry for rapid set-up and interchangeability Engineered to the SDJCR 1616 form factor, the tool carries a 16 × 16 mm interface that matches common lathe tool posts and boring bars. The cutting height of 27 mm and a cutting angle of 93° produce a stable tool tip position, making dimensioning and repeatability straightforward when swapping holders or inserts. Compatibility with DCMT 0702 indexable inserts simplifies inventory: the same insert grade and size can be used across multiple toolholders, lowering stocking complexity and saving set-up time on the shop floor. Maintenance-friendly fastenings and workshop practicality Clamping is secured by an M2.5×5.5 screw tightened with a Torx T8 key, offering a compact, serviceable fastening that is easy to access during routine checks. The flat, compact head and 100 mm overall length provide a low-profile solution that reduces overhang and vibration risk. At just 0.21 kg, the holder is light enough to handle comfortably while remaining rigid in the tool post. The holder’s compatibility with standard boring-bar designation H07-F-IC supports a modular tooling approach, enabling quick reconfiguration of turning stations to meet changing production needs. Contact Metav Werkzeuge for application advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: AP570TM Type designation: SDJCR 1616 Description: SDJC for DCMT indexable inserts, flat version Manufacturer: Teknik Makina Dimensions & performance Head width: 16 mm Head height: 16 mm Cutting head width: 16 mm Cutting height: 27 mm Overall length: 100 mm Overall height: 16 mm Cutting angle: 93° Weight: 0.21 kg Compatibility & features Suitable for DCMT 0702 indexable inserts Right-hand cutting orientation Internal coolant Clamping screw: M2.5×5.5 (Torx T8) Boring bar designation: H07-F-IC FAQ Which insert sizes fit this holder? The AP570TM is designed for DCMT 0702 indexable inserts; these inserts fit the holder seat and provide the intended cutting geometry. Is the tool coolant-through? Yes, the holder includes internal coolant to direct fluid to the cutting zone and improve chip control and tool life. Which cutting direction does this holder support? This turning holder is configured for right-hand cutting operations. What fastening hardware is required for maintenance? Clamping is secured with an M2.5×5.5 screw and requires a Torx T8 key for tightening or replacement. What is the ISO designation and size of the holder? The tool carries the SDJCR 1616 designation with a 16 × 16 mm interface suitable for common tool posts and modular systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-oriented design that combines stable clamping with quick insert changes and consistent left-hand cutting performance; order the SDJCL 1616 clamping holder via Metav Werkzeuge or consult our technical team for application advice. SDJCL 1616 clamping holder — flat SDJC for DCMT inserts, 16 x 16 mm The SDJC for DCMT Indexable Inserts is a flat, left-hand clamping toolholder for turning operations, intended for use with DCMT 11T3 indexable inserts. Flat SDJC clamping holder for DCMT 11T3 inserts 16 x 16 mm head and shank dimensions Left-hand cutting with 93° cutting angle M5 clamp screw and M3.5x8.5 torx fixing Consistent accuracy through a rigid, compact layout The holder’s 16 x 16 mm head and shank dimensions, combined with a total length of 100 mm, deliver a compact package that reduces overhang and vibration in turning operations. A lower overhang improves repeatability and surface finish, which in turn prolongs insert life and reduces rework. The specified cutting height 25 mm ensures that tool position relative to the workpiece remains stable, making this holder suited to short-reach, high-stability tasks on lathes and turning centres. The design supports predictable machining cycles and fewer rejects in production. Quick, secure clamping to reduce downtime Designed for straightforward insert changes, the holder accepts DCMT 11T3 indexable inserts and secures them with an M5 clamp screw and supporting torx screw (M3.5x8.5) fixed with a T15 key. The clamping plate designation TA030 is specified for correct seating. These standard fittings speed up maintenance and reduce tool-change time in repetitive workflows. The result is a measurable increase in machine uptime and more efficient shift planning for small to medium-sized batch production. Purpose-built for left-hand turning and defined approach geometry Configured for left-hand cutting, this toolholder applies a 93° approach angle that positions the insert for robust cutting forces and controlled chip flow in left-handed operations. Left-hand orientation is essential when machining features that demand a specific feed direction or when machine setup requires mirrored toolpaths. The clear specification of direction and angle simplifies process planning and avoids ambiguity when integrating the holder into existing tool racks or CNC tool libraries. Integration with workshop procurement and quality assurance Produced by Teknik Makina to ISO-style designation SDJCL 1616, the holder is light at 0.18 kg yet engineered for industrial use. The compact form factor makes it easy to stock alongside other turning tools, and the standardised fastening parts reduce the variety of spare hardware required. For procurement, the product’s compatibility with commonly used DCMT inserts and standard screws simplifies logistics and keeps tooling inventories lean, supporting Metav’s approach to accessible precision. For tailored advice, spare-part lists or to procure Teknik Makina SDJCL 1616 clamping holders directly, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, specialist support and reliable supply from our Emmerich centre Technical data Article number: D157TM Designation: SDJC for DCMT Indexable Inserts Manufacturer: Teknik Makina Core dimensions Overall length: 100 mm Head width: 16 mm Shank height: 16 mm Cutting head width: 16 mm Cutting height: 25 mm Weight: 0.18 kg Cutting/approach angle: 93° Features & fittings ISO designation: SDJCL 1616 Compatible inserts: DCMT 11T3 Cutting direction: left-hand Clamp screw: M5 Torx screw: M3.5 x 8.5 Torx key size: T15 Clamping plate: TA030 FAQ Which inserts are compatible with this holder? The holder is compatible with DCMT 11T3 indexable inserts; the SDJCL 1616 is engineered to seat these inserts securely for standard turning tasks. Is the holder suitable for right-hand turning applications? This toolholder is configured for left-hand cutting and is intended for left-oriented turning operations rather than right-hand use. What are the main dimensions to consider when planning a tool setup? Key dimensions are 16 x 16 mm for head and shank, overall length 100 mm, and cutting height 25 mm for the SDJCL 1616 (SKU D157TM). What fastening parts are required for proper assembly? Assembly uses an M5 clamp screw, an additional M3.5 x 8.5 torx screw and a T15 torx key; the clamping plate specified is TA030. What advantage does the 93° cutting angle provide? The 93° approach angle provides a robust contact geometry that stabilises the insert under cutting loads, improving surface finish and component consistency. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine accurate clamping geometry, internal coolant and compatibility with DCMT 11T3 inserts for dependable left-hand turning operations; order directly via Metav Werkzeuge or consult the technical advisors for application support. Klemmhalter AP515TM — SDJC holder for DCMT indexable inserts, left-hand, 16 x 16 mm (Teknik Cutting Tools) The Klemmhalter AP515TM is a left-hand SDJC clamping holder engineered for turning with DCMT 11T3 indexable inserts, optimised for controlled coolant delivery and compact 16 x 16 mm mounting. SDJCL 1616 shank, 16 x 16 mm Designed for DCMT 11T3 indexable inserts Internal coolant supply for chip control Left-hand turning with 93° cutting angle Precision that shortens setup and keeps tolerances tight The AP515TM combines a compact 16 x 16 mm shank and a consistent cutting height of 32 mm to provide repeatable tool positioning across serial production. The ISO designation SDJCL 1616 identifies the holder geometry for straightforward tool selection and machine programming. With an overall length of 100 mm and a lightweight construction at 0.204 kg, the toolholder minimises overhang while maintaining rigidity, which reduces vibration and supports stable cutting forces. Compatibility with DCMT 11T3 inserts ensures easy sourcing of cutting edges and predictable performance in left-hand turning applications. Controlled coolant and chip management for longer tool life Integrated internal coolant channels deliver cutting fluid directly to the insert seat, improving cooling at the cutting zone and promoting efficient chip evacuation. This direct feed helps to lower thermal load on the insert and workpiece, which in turn extends the service life of indexable tips and reduces the risk of built-up edge. The specified 93° cutting angle supports secure engagement on shoulder and profile cuts while the holder geometry directs chips away from the tool flank, resulting in fewer interruptions for cleaning and less rework downstream. Secure clamping and straightforward service routines Clamping is achieved using the supplied retention hardware and a TA030 support plate, with a Torx fastener system (key T15) and a retention screw M3.5x11 for positive, repeatable seating. The toolholder accepts standard DCMT tips and is compatible with shank designation H11 for the relevant boring bar series, simplifying inventory and reconditioning workflows. The mechanical design facilitates rapid insert changes and controlled torque application, which shortens maintenance intervals and reduces unplanned downtime while preserving cutting geometry. Practical fitment in production environments Built for workshops and production turning centres that require a compact left-hand option, this SDJC holder suits applications that use industry-standard DCMT inserts for general turning and profiling tasks. The combination of compact dimensions, internal coolant and standardised mounting makes the holder a practical choice where setup speed and process stability are priorities. For operations aiming to consolidate tooling without sacrificing reliability, the AP515TM integrates with common tool post systems and supports an efficient workflow from set-up through series production. For dependable left-hand turning with internal coolant, contact Metav Werkzeuge to secure supply of the Teknik Cutting Tools SDJCL 1616 holder AP515TM — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: AP515TM Manufacturer: Teknik Makina Description: SDJC for DCMT Indexable Inserts Facts Shank / holder height: 16 mm Cutting-head width: 16 mm Holder width: 16 mm Cutting height: 32 mm Overall length: 100 mm Weight: 0.204 kg Cutting angle: 93° Special features Compatible inserts: DCMT 11T3 ISO designation: SDJCL 1616 Internal coolant: yes Cutting direction: left-hand U-plate: TA030 Torx key: T15 Torx screw: M3.5x11 Boring-bar designation: H11 FAQ Which inserts fit this holder? The AP515TM is specified for DCMT 11T3 indexable inserts and accepts the common DCMT geometry for standard turning tasks. Is coolant supported through the toolholder? Yes, the holder features internal coolant delivery to the insert seat for improved cooling and chip control. Can the holder be used for right-hand turning? This item is configured for left-hand turning; for opposite-direction operations a right-hand equivalent should be selected. What fasteners are required for clamping? Clamping uses a Torx retention screw M3.5x11 tightened with a T15 key and the matching TA030 support plate. What is the ISO designation for ordering and setup? The ISO identifier is SDJCL 1616, which aids in matching the holder to compatible tool posts and machine fixtures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact SDJCR 1616’s precise 16 mm clamping geometry and secure Torx fixing to maintain stable, repeatable turning operations; order directly via Metav Werkzeuge or contact the consultants for suitability advice. SDJC for DCMT Indexable Inserts (SDJCR 1616) — Compact right‑hand toolholder with 93° approach angle A SDJC for DCMT indexable inserts (SDJCR 1616) designed for right‑hand turning tasks where a compact head and reliable clamping are essential for consistent chip control and repeatable part quality. SDJCR 1616 ISO toolholder for DCMT 11T3 inserts Compact 16 x 16 mm head for tight spaces Right‑hand cutting with 93° approach angle Includes Torx M3.5x8.5 screw and M5 clamp plate Stable clamping that prolongs insert life and reduces rework The holder’s 16 mm head dimensions and robust clamping geometry provide a rigid interface between tool and insert, which reduces vibration and improves surface finish. With an approach angle of 93°, the arrangement favours secure engagement of DCMT 11T3 indexable inserts and helps maintain consistent chip formation in interrupted cuts. The combination of compact size and structural stability translates into fewer insert changes and lower scrap rates in serial turning operations. Fast set‑up and positive locking for uninterrupted machining A clear benefit of this design is quick, repeatable assembly: the clamp plate (TA030) uses an M5 fastening and the insert pocket secures with a Torx M3.5x8.5 screw, tightened with a T15 key, which simplifies workshop logistics and reduces tool‑change time. At an overall length of 100 mm and weighing 0.18 kg, the toolholder is easy to handle yet substantial enough to withstand typical turning forces. These features support efficient production cycles and make the holder suitable for compact toolpost arrangements. Broad compatibility for common turning setups Engineered for standard indexable inserts, the holder accepts DCMT 11T3 inserts and pairs with bar designations such as H11‑F, enabling integration into many existing tool systems. The right‑hand cutting orientation suits conventional lathe programmes and tooling layouts, while the ISO designation SDJCR 1616 ensures clear specification when coordinating inserts and spare parts. This makes the component a practical choice for workshops aiming to consolidate tooling without compromising process reliability. Contact Metav Werkzeuge today to confirm fitment and secure reliable supply of the SDJCR 1616; information and ordering via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: D458TM Manufacturer: Teknik Makina ISO designation: SDJCR 1616 ECLASS: 21181004 Facts Head width: 16 mm Head height: 16 mm Cutting head width: 16 mm Overall length: 100 mm Weight: 0.18 kg Approach angle: 93° Cutting direction: right Features Suitable for DCMT 11T3 inserts Clamp plate: TA030 Clamp plate screw: M5 Torx screw: M3.5x8.5 Torx key: T15 Boring bar designation: H11-F FAQ Which inserts fit this holder? The holder is specified for DCMT 11T3 indexable inserts and is designated SDJCR 1616, ensuring compatibility with common DCMT insert geometries. What is the approach angle and why does it matter? The 93° approach angle defines the cutting engagement and supports stable chip formation and consistent surface finish in right‑hand turning operations. Which fastening parts are supplied or required? The toolholder uses a clamp plate TA030 with an M5 fastening and requires a Torx M3.5x8.5 screw (Torx key T15) for insert retention. Is the holder suitable for compact toolposts? Yes; with a compact 16 x 16 mm head and 100 mm overall length, the design is intended for tight machining envelopes and minimal overhang. What is the ISO designation and catalogue reference? The ISO designation is SDJCR 1616 and the SKU / article number is D458TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise clamping, compact design and proven compatibility with DCMT inserts for efficient turning operations; order directly via Metav Werkzeuge or contact our consultants for application advice. SDJC for DCMT Indexable Inserts — SDJCR 1616 Toolholder by Teknik Cutting Tools, right‑hand cutting, compact 100 mm length SDJC for DCMT Indexable Inserts is a right‑hand clamping toolholder designed for turning with DCMT 11T3 indexable inserts; ideal for shops seeking secure clamping and predictable cutting geometry in confined setups. SDJCR 1616 ISO toolholder Compatible with DCMT 11T3 inserts Right‑hand cutting orientation Compact 100 mm overall length Consistent clamping for repeatable turning results The solidly machined toolholder body provides a stable seat for inserts, ensuring repeatable cutting forces and surface finish. With an ISO designation SDJCR 1616 and compatibility with DCMT 11T3 inserts, the assembly reduces insert play and vibration; this leads to lower tool wear and more consistent part tolerances. The 16 mm holder height and 20 mm cutting‑head width are balanced for rigidity in short‑overhang applications, helping maintain concentricity during medium‑duty turning tasks. Fast setup and predictable cutting geometry A clear advantage of this clamping solution is reduced setup time: the insert pocket and clamping path are engineered to position each DCMT insert precisely, so index changes return the original cutting geometry. The 93° cutting angle supports a controlled chip flow and stable engagement on facing and light profiling, while the right‑hand configuration suits conventional turning directions. For production runs where consistency matters, the predictable tool path shortens process validation and increases uptime. Space‑saving design suited to compact toolposts At an overall length of 100 mm and a net weight of 0.204 kg, the holder is tailored for toolposts with limited clearance. The compact dimensions permit closer tool stacking and easier access on multi‑station turrets. In addition to freeing up workspace, the smaller overhang reduces bending moments, contributing to improved surface finish without altering cutting parameters significantly. Application focus and material compatibility Configured specifically for DCMT 11T3 inserts, this holder excels in general turning tasks on conventional steels and alloyed materials where indexable carbide inserts are standard. The design supports a secure clamping force via the designated clamping screw interface (H11 shank reference), which stabilises the insert under intermittent loads; this is particularly beneficial for batch production and mixed‑series turning where fast insert indexing is required. For application guidance or to specify the SDJCR 1616 holder for a particular lathe or insert grade, contact Metav Werkzeuge — our consultants assist with matching toolholders and inserts for optimal productivity and tool life. Technical data SKU: D224TM Manufacturer: Teknik Makina Article name: SDJC for DCMT Indexable Inserts (SDJCR 1616) Numbers / Core technical data Holder height: 16 mm Holder width: 16 mm Cutting‑head width: 20 mm Cutting height: 25 mm Overall length: 100 mm Weight: 0.204 kg Cutting angle: 93° Cutting direction: right Suitable for: DCMT 11T3 inserts Designs / Special features ISO designation: SDJCR 1616 Shank reference: H11 Indexable insert compatibility: DCMT 11T3 Compact form factor for limited toolpost space FAQ What inserts fit this toolholder? The SDJCR 1616 toolholder is designed to accept DCMT 11T3 indexable inserts, providing correct seating and clamping for standard grades. Is the holder suitable for right‑hand turning only? Yes, the design specifies a right‑hand cutting orientation to match conventional turning directions and toolpost setup. How does the compact length affect performance? The 100 mm overall length reduces overhang, lowering bending moments and improving surface finish compared with longer holders when used in similar cutting conditions. Can this toolholder be used for finishing passes? With its stable clamping and a 93° cutting angle, the holder supports controlled engagement suitable for finishing and light profiling with appropriate insert grades. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com