Gibt es einen Hahn und Kolb Online Shop?

Benefit from a rigid, indexable solution that combines stable clamping with precise insert compatibility: a 19 mm cutting diameter paired with a 20 mm shank gives consistent machining results, while compatibility with 16 IR indexable inserts keeps tooling costs controllable. Order via Metav Werkzeuge or consult our specialists for application advice. SIR S20P boring bar K337-7TM by Teknik Makina — 19 mm cutting diameter, 20 mm shank A SIR S20P boring bar for right-hand turning, intended for use with 16 IR indexable inserts and machines accepting a 20 mm shank. Right-hand cutting for standard turning Fits 16 IR indexable inserts Shank Ø 20 mm for secure clamping Overall length 170 mm for extended reach Stable cutting for consistent surface finish The design focuses on delivering repeatable results in turning operations. The combination of a 19 mm cutting diameter and a 20 mm shank reduces deflection during cuts, which improves surface quality and dimensional stability on the workpiece. Using 16 IR indexable inserts means insert changes are fast and economical; the replaceable cutting edges maintain consistent geometry without the need for regrinding. This approach supports efficient cycle times and helps to lower total tooling costs over production runs. Secure clamping and straightforward maintenance Robust clamping is enabled by the shank size and the fastener system: the insert is secured with an M3.5x8.5 Torx screw, tightened using a T15 key, which ensures accurate seat contact and reliable torque transmission. The SIR S20P designation indicates the intended insert and holder interface, simplifying tool setup in the shop. With an overall length of 170 mm and a compact mass of 0.381 kg, the bar balances reach and rigidity, making maintenance and handling uncomplicated while preserving machining stability. Integration into machining workflows The bar is optimised for right-hand cutting applications and will suit conventional lathes and CNC turning centres that accept a 20 mm shank and IR-style inserts. Its ISO-related designation and standard fastening arrangement support compatibility with common indexable systems, so the tool can be introduced without complex adapter work. For operations requiring reliable insert changes and a predictable toolpath response, this turning bar provides a practical blend of accessibility and performance. For application-specific advice or to secure supply of the Teknik Makina SIR S20P boring bar (K337-7TM), contact Metav Werkzeuge in Emmerich for tailored guidance and reliable delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K337-7TM Manufacturer: Teknik Makina Designation: SIR S20P Description: SIR for IR Indexable Inserts Fits inserts: 16 IR Facts Diameter: 19 mm Shank diameter: 20 mm Cutting height: 40 mm Overall length: 170 mm Weight: 0.381 kg Torx screw: M3.5x8.5 Torx key: T15 Cutting direction: right Special features Fits 16 IR indexable inserts ISO designation: SIR S20P Clamp holder designation: IR16 Right-hand cutting Secure Torx fastening system FAQ Which inserts are compatible with this boring bar? The Teknik Makina SIR S20P boring bar (K337-7TM) is designed for 16 IR indexable inserts, using the standard SIR interface for reliable seating and repeatability. Is the tool right- or left-hand cutting? This boring bar is configured for right-hand cutting, suitable for conventional right-hand turning applications. What shank diameter is required for mounting? The bar has a 20 mm shank diameter, so it fits tool holders and turret stations that accept a 20 mm shank. How are the inserts secured and what torque tool is required? Inserts are fastened with an M3.5x8.5 Torx screw and the required key size is a T15, ensuring consistent clamp force and easy insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable production-grade parting and grooving performance thanks to a 25 mm cutting-head width, right-hand cutting direction and a compact 170 mm overall length; ideal for integration with Korloy 5C MGM inserts. Order direct via Metav Werkzeuge or consult the technical team for application guidance. Parting clamp holder — 25 mm cutting-head, right-hand by Teknik Makina The parting clamp holder is designed for precision parting and grooving on lathes and CNC turning centres, compatible with Korloy 5C MGM indexable inserts 25 mm cutting-head width Right-hand cutting direction Compatible with Korloy 5C MGM inserts 170 mm overall length Consistent parting accuracy for uninterrupted machining This holder delivers a stable clamping concept that supports repeatable parting and grooving operations. The 25 mm cutting-head width provides a defined contact area that reduces lateral vibration and maintains a clean kerf, while the right-hand orientation suits standard lathe feed directions. By pairing the holder with Korloy 5C MGM inserts the system benefits from a proven insert geometry that promotes reliable chip control. The combination of these features reduces the need for frequent adjustments and contributes directly to predictable cycle times on production runs. Easy integration into existing tooling setups Designed with standard designations in mind, the holder uses the ISO 2525 format and accepts a 5C-R MGM shank configuration, which simplifies tool selection and mounting. The overall length of 170 mm balances reach and rigidity, making it suitable for both close-coupled and slightly extended setups without compromising stability. Clear specification of insert compatibility and ISO designation enables quick verification during tool changeovers and supports efficient toolroom workflows, reducing setup complexity for operators and planners. Durable behaviour under shop-floor conditions Built for regular workshop use, the parting clamp holder combines compact geometry with a secure clamping interface to keep inserts firmly seated during interrupted cuts. The solid build and straightforward interface with 5C MGM inserts result in fewer insert slippages and a reduced frequency of rework. This reliability translates into lower downtime and makes the holder a cost-effective choice for small-batch production as well as higher-volume turning work where consistent part quality is required. Contact Metav Werkzeuge for availability, technical clarification and order processing of the Teknik Makina parting clamp holder D962TM — expert advice and quick delivery from Emmerich guarantee a reliable supply chain. Technical data SKU: D962TM Manufacturer: Teknik Makina Product name: Parting clamp holder ISO designation: 2525 Compatible inserts: Korloy 5C MGM Bore bar designation: 5C-R MGM Cutting direction: right Cutting-head width: 25 mm Overall length: 170 mm Core technical figures Cutting-head width: 25 mm Overall length: 170 mm Intended cutting direction: right-hand ISO designation: 2525 Versions and special features Compatible inserts manufacturer: Korloy Insert type: 5C MGM Bore bar / shank: 5C-R MGM SKU: D962TM FAQ What insert type fits this holder? The holder accepts 5C MGM indexable inserts and is specified for Korloy 5C MGM insert geometries. Is the cutting direction fixed? Yes, the tool is supplied for right-hand cutting applications and is optimised for conventional lathe feed directions. What is the overall length and how does that affect rigidity? The overall length is 170 mm; this length balances reach with stiffness to provide good rigidity for standard parting and grooving tasks. Which ISO designation applies to the holder? The holder follows ISO 2525, facilitating compatibility checks and straightforward integration into established tool inventories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact clamp-style design combined with a 4 mm cutting width and a 25 mm maximum grooving depth to achieve precise, repeatable parting and grooving operations; order directly via Metav Werkzeuge or request technical guidance for optimal integration into existing tooling setups. Stechklemmhalter D963TM — clamp-style parting and grooving toolholder, 4 mm cutting width (Teknik Makina) A Stechklemmhalter D963TM for right-hand parting and grooving applications, engineered to accept Korloy 4C MGM inserts and to deliver consistent performance in production turning operations 4 mm cutting width for narrow grooves Max grooving depth 25 mm 25 mm cutting head width Right-hand cutting direction Compatible with Korloy 4C MGM inserts Consistent groove quality through defined cutting geometry The clamp-style design provides a secure seat for indexable inserts, which stabilises the cutting edge and reduces vibration; the result is consistent groove dimension and improved surface finish. The 4 mm cutting width is intended for narrow slotting and parting tasks where control and repeatability matter. By combining a rigid clamping arrangement with a modest tool mass, the holder supports reliable chip formation and predictable tool life in medium-duty turning cycles Robust clamping for repeatable set-up and long tooling life A robust clamping mechanism ensures the insert remains locked during interrupted cuts and high radial loads. The holder’s 25 mm head width and secure screw clamp reduce micro-movement at the cutting edge, delivering repeatable set-ups and minimising rework. Because the assembly is straightforward, changeover times are reduced and process stability is improved — relevant benefits for batch production and workshop environments Easy integration with existing turning systems Designed with industry-standard interfaces, the toolholder uses the 3C‑R MGM shank designation for straightforward mounting. Compatibility with Korloy 4C MGM inserts simplifies procurement and inventory management, since widely available insert geometries can be used. The right-hand cutting orientation is suitable for conventional lathe set-ups where turning tools approach the workpiece from the operator’s left to right Application guidance for productive machining workflows With an overall length of 170 mm and a compact mass of 0.727 kg, the holder balances accessibility and rigidity for both external and internal grooving set-ups where reach and clearance are required. The 25 mm maximum grooving depth enables substantial engagement for deep slots while remaining within a safe range for standard indexable inserts. For process optimisation, pairing the holder with inserts from the specified manufacturer yields the greatest performance consistency Contact Metav Werkzeuge for application advice or component recommendations for the Teknik Makina clamp holder — Metav Werkzeuge provides technical support from Emmerich and can assist with selection and integration Technical data Article number: D963TM Name: Stechklemmhalter Manufacturer: Teknik Makina Weight: 0.727 kg Overall length: 170 mm Facts Head width: 25 mm Cutting width: 4 mm Max grooving depth: 25 mm Cutting direction: right Special features ISO designation: 2525 Compatible inserts: Korloy 4C MGM Shank designation: 3C‑R MGM FAQ Which insert types fit this holder? The holder accepts Korloy 4C MGM indexable inserts as specified for the D963TM and is optimised for those geometries What is the maximum grooving depth? Maximum grooving depth for this clamp-style holder is 25 mm, enabling deeper slotting within recommended insert limits Is the toolholder for right-hand cutting only? Yes, the tool is specified for right-hand cutting, suitable for standard lathe orientations with right-hand approach What are the key dimensions for mounting and reach? Overall length is 170 mm and head width is 25 mm, providing a compact reach with stable support Which shank designation is used for machine compatibility? Shank designation 3C‑R MGM is applied for the D963TM to match common turning tool posts and holders Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, right-hand parting holder that combines consistent clamping, narrow 4 mm cutting width and a 18 mm maximum cutting depth to maintain stable parting operations. The holder's compact profile and ISO designation support seamless integration into existing tool setups; order via Metav Werkzeuge or consult the specialists for exact matching inserts and delivery. Parting Tool Holder D772TM — Right-hand parting holder, 4 mm cutting width (Teknik Makina) A Parting Tool Holder D772TM for right-hand grooving and parting operations, designed for compatibility with ISCAR 4C GRP inserts and standard shank interfaces Right-hand orientation for standard turning setups 4 mm cutting width for narrow parting operations Max cutting depth 18 mm for deeper grooving Compatible with ISCAR 4C GRP inserts Stable parting performance that reduces rework The holder is engineered to deliver consistent cut geometry for parting and grooving tasks. With a 4 mm cutting width and an 18 mm max cutting depth, the design focuses on keeping forces predictable during engagement, which reduces chatter and the risk of workpiece distortion. The right-hand orientation supports common lathe set-ups and simplifies tool inventory. This results in fewer rejected parts and a measurable improvement in process reliability when compared with generic clamping solutions. Compact, rigid design for quick set-up and low downtime A compact clamping area of 32 mm x 32 mm and a 170 mm overall length provide a small footprint while maintaining rigidity. The ISO 3232 designation and the matching shank reference 4C-R GRP ensure standardised mounting and repeatable positioning on turret systems. At 1.285 kg, the holder balances mass for stability without overloading the turret, making tool changeover faster and reducing machine idle time. Insert compatibility that simplifies tool management Compatibility with ISCAR 4C GRP inserts and the widely used 4C-R GRP shank family allows straightforward procurement and stocking. The use of familiar insert formats reduces the need for special tooling and shortens lead times for replacement parts. The holder’s clamping concept keeps the insert secure under interrupted cuts, improving insert life and lowering overall tooling costs. Ideal for workshops aiming to raise throughput This holder is suited to production and job-shop environments where predictability and uptime matter. The combination of narrow cutting capability, solid clamping and standard interfaces supports tasks from simple parting to more demanding grooving operations. Supplied specifications help planning for spindle loads and cycle times, while compatibility with established inserts reduces administrative overhead for tool purchasing. For precise parting and reliable delivery, request the Teknik Makina D772TM through Metav Werkzeuge — technical advice and availability are provided at Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D772TM Manufacturer: Teknik Makina ECLASS: 21181005 SKU: D772TM Facts Overall length: 170 mm Holder width: 32 mm Holder height: 32 mm Cutting head width: 32 mm Cutting width: 4 mm Max cutting depth: 18 mm Weight: 1.285 kg Cutting direction: right Special features Compatible with ISCAR 4C GRP inserts Shank designation: 4C-R GRP ISO designation: 3232 Application: parting / grooving FAQ Which inserts fit this holder? The holder accepts ISCAR 4C GRP type inserts; the matched shank designation is 4C-R GRP, ensuring standard insert fitment for the D772TM. Is the holder suitable for left-hand operations? This version is configured for right-hand cutting direction; left-hand operations require a left-hand variant. What is the maximum depth of cut? Maximum cutting depth is 18 mm, as specified for the D772TM, which helps plan process parameters and tool selection. What are the key dimensions for turret mounting? Key dimensions include a 32 mm holder width and height with an overall length of 170 mm, enabling straightforward turret accommodation. How heavy is the tool holder? The holder weight is 1.285 kg, chosen to balance rigidity and turret load for stable parting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise internal coolant control and a secure Torx clamping system to improve thread quality and reduce tool change time; the robust Ø20 mm bar with a TA060 clamping plate ensures consistent set-ups. Order the K327-4TM directly via Metav Werkzeuge or contact our consultants for application advice. K327-4TM Threading bar — internal threads with internal coolant, compatible with 16 IR inserts K327-4TM is a purpose-built threading bar for machining internal threads with IR indexable inserts, offering integrated coolant supply and standardised mounting for predictable workshop set-ups Internal coolant channel Designed for 16 IR indexable inserts Ø20 mm diameter, 170 mm overall length Torx screw M3.5x11, T15 key Controlled coolant for cleaner threads and longer tool life Integrated internal coolant directs cutting fluid precisely to the cutting edge, which improves chip evacuation and reduces built-up edge formation. This targeted cooling and lubrication results in more consistent thread profiles and contributes to extended tool life by lowering cutting temperatures and minimizing friction. For operations where chip control and surface finish matter, the central coolant feed offers a clear productivity advantage over external supply alone. Secure clamping for fast insert changes and reliable repeatability The bar is configured for 16 IR indexable inserts and uses a Torx fixing to ensure stable clamping during threading cycles. The Torx screw M3.5x11 and the matching T15 key provide straightforward, repeatable insert replacement with minimal downtime. The TA060 clamping plate design keeps insert seating consistent, which reduces setup variation and supports tight process tolerances when producing series or mixed-batch components. Standardised dimensions for straightforward set-up and alignment With a Ø20 mm shank and 170 mm overall length, the holder fits common turret and toolpost layouts while offering predictable overhang characteristics. The nominal dimensions simplify toolholder selection and make programme simulation and collision checks more reliable. The included pass shim BSP10 facilitates exact axial positioning during assembly, helping maintain thread concentricity and repeatable results across multiple machines. Practical workshop integration and maintenance tips The design focuses on ease of use in production environments: the combination of internal coolant and standardised fixing means fewer process interruptions and easier diagnostics when troubleshooting a thread quality issue. Spare Torx screws and the TA060 plate are simple to source, and routine checks of clamping torque on the Torx fixing maintain secure seating. For rigs that require modular tooling, this bar integrates cleanly into existing indexable-insert systems and tooling inventories. Contact Metav Werkzeuge for detailed application support, compatible insert recommendations and to reserve the K327-4TM threading bar; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: K327-4TM Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com Description: Threading bar for internal threads for IR indexable inserts Data Diameter: 20 mm Overall length: 170 mm Compatible insert size: 16 IR Torx screw: M3.5x11 Torx key: T15 Special features Internal coolant U-plate: TA060 Pass shim: BSP10 Compatible with IR indexable inserts FAQ What type of inserts are compatible with this holder? The holder is designed for 16 IR indexable inserts, ensuring correct seat geometry and secure clamping for internal thread machining. Does the tool provide coolant to the cutting zone? Yes, the K327-4TM features an internal coolant channel to deliver fluid directly to the insert cutting edge. Which Torx fixing is used for the insert clamping? Insert clamping uses a Torx screw M3.5x11 tightened with a T15 key for secure and repeatable clamping. What are the key mounting dimensions to check before fitting? Key dimensions are Ø20 mm shank diameter and 170 mm overall length; the pass shim BSP10 is provided for axial positioning. Can the clamping plate be replaced with other designs? The bar uses a TA060 clamping plate; replacements or compatible plates should match this specification to retain correct insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, ISO‑compatible clamping solution that combines extended reach with precise left‑hand cutting geometry for consistent turning cycles. Order the component directly via Metav Werkzeuge or consult the Metav specialists for fitment and supply. Clamping holder L170 mm (Teknik Makina) — left‑hand, 93° cutting angle The Clamping holder L170 mm is a robust toolholder for left‑hand turning operations, designed to fit ISO 3232 interfaces and provide extended reach for machining tasks. ISO 3232 compatible design 170 mm overall length for extended reach Left‑hand cutting, 93° cutting angle Robust M16 thread and M5 clamping screw Precision clamping that stabilises turning geometry The holder is engineered to maintain a consistent cutting geometry through a defined 93° cutting angle, which supports reliable chip flow and surface finish during left‑hand operations. The ISO 3232 designation ensures a standard interface for repeatable seating in compatible toolposts, reducing positional variance between tool changes. With an overall length of 170 mm, the assembly is suitable where additional reach is required without compromising rigidity, and the 32 mm body width and height balance clearance with stability to minimise vibration. Secure mounting reduces setup time and improves process reliability Mounting is achieved via a M16 thread and the clamping is tightened with an M5x26 securing screw, operated using the supplied 3 Allen key format. This combination delivers a compact yet forceful clamp that secures the cutting head and keeps toolholder movement to a minimum under load. The measured mass of 1.349 kg contributes to inertial damping, helping to preserve tool life and dimensional consistency across batch runs. Quick, reproducible clamping shortens fixture time and supports higher uptime on the lathe. Workshop integration and dependable supply for production continuity The cutting head profile (40 mm width, 45 mm cutting height) matches common turning inserts and mounting interfaces, enabling seamless integration into standard turning stations. Supplied as SKU D345TM by Teknik Makina, the component reflects straightforward mechanical design that is easy to inspect and maintain. Procurement through Metav Werkzeuge provides the advantage of a European quality filter and dependable logistics, backed by a broad product portfolio and long‑standing industry trust. For technical clarifications or specification cross‑checks, the Metav team can be contacted to ensure the holder aligns with the intended toolpost and insert system. Request a supply recommendation for the Teknik Makina clamping holder L170 mm from Metav Werkzeuge or contact the Metav specialists for compatibility advice and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: D345TM ECLASS: 21181004 Label: Klemmhalter L170mm ISO designation: 3232 Dimensions & core data Overall length: 170 mm Body width: 32 mm Body height: 32 mm Cutting head width: 40 mm Cutting height: 45 mm Weight: 1.349 kg Materials & features Thread: M16 Clamping screw: M5x26 Allen key: 3 Allen Cutting direction: left Cutting angle: 93° FAQ What cutting direction is the holder set up for? The Clamping holder L170 mm (Teknik Makina, SKU D345TM) is configured for left‑hand cutting, with a 93° cutting angle designed to suit corresponding turning operations. Which dimensions are most relevant for installation? Key dimensions are overall length 170 mm, body width and height 32 mm each, cutting head width 40 mm and cutting height 45 mm; these determine fitment into the holder interface and clearance in the machine setup. Which mounting thread and fastening are required? Mounting is provided via an M16 thread and secured with an M5x26 clamping screw; the fastenings are operated using a 3 Allen key format for tightening. Is the holder compatible with ISO toolposts? Compatibility is determined by the ISO 3232 designation of the holder; the Clamping holder L170 mm is manufactured to that interface standard, so it fits toolposts accepting ISO 3232 holders. What information is useful when ordering this holder? When ordering, reference SKU D345TM and the Teknik Makina brand to ensure the correct left‑hand, 93° clamping holder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, standardised compatibility and accessible technical support for reliable turning performance; order the clamping holder directly via Metav Werkzeuge or request application advice from our consultants. Clamping Holder DCLN for CN-- Indexable Inserts — left‑hand, 170 mm overall length (Teknik Makina) A left‑hand Clamping Holder DCLN for CN-- Indexable Inserts engineered for secure clamping of CN--1906 inserts in turning operations DCLNL 3232 ISO designation Left‑hand cutting direction 170 mm overall length for deep reach Compatible with CN--1906 indexable inserts Secure clamping for consistent cycle times The DCLNL 3232 geometry provides a reliable clamping principle that keeps the insert rigid under cutting forces, which reduces chatter and rework. With a holder height of 32 mm and a head width of 40 mm, the design transfers forces into the tool body rather than the insert pocket. This results in repeatable machining and predictable tool life — a rational improvement that supports tighter process control on the shop floor. Predictable cutting behaviour and insert interchangeability The toolholder’s 95° cutting angle and left‑hand orientation are matched to turning operations requiring controlled rake and clearance. Compatibility with CN--1906 indexable inserts ensures simple insert changes and consistent cutting geometry across batches. For process engineers this means fewer adjustments between tool changes and a more reliable surface finish, translating into measurable time savings on series production. Practical setup and mechanical balance At an overall length of 170 mm and a mass of 1.43 kg, the assembly offers reach while keeping dynamic balance within typical lathe toolpost limits. The shank designation P19 facilitates correct mounting and alignment in standard toolholders. Because the holder is designed for indexable inserts, maintenance is limited to routine checks and fast insert swaps, helping to keep machine uptime high and tool inventory manageable. Suitable applications and workshop integration This clamping assembly is intended for turning tasks where a robust, standardised interface to CN--1906 inserts is required. The combination of ISO designation, clear dimensional data and conventional shank reference allows procurement and planning teams to specify the component with confidence. Integration into existing tooling stocks is straightforward, supporting efficient supplier consolidation and consistent production quality. Contact Metav Werkzeuge for tailored advice on application fitment for the Teknik Makina clamping holder and to arrange supply from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D307TM Manufacturer: Teknik Cutting Tools / Teknik Makina ISO designation: DCLNL 3232 Compatible inserts: CN--1906 Facts Overall length: 170 mm Holder height: 32 mm Head width: 40 mm Holder width: 32 mm Cutting height: 40 mm Cutting angle: 95° Weight: 1.43 kg Direction: left Special features DCLN for CN-- Indexable Inserts Shank designation P19 ISO‑standard clamping geometry Designed for turning operations FAQ What insert type fits this holder? The clamping holder accepts CN--1906 indexable inserts, providing standardised insert interchangeability for predictable cutting geometry. Is the holder suitable for left‑hand turning only? Yes, the toolholder is configured for left‑hand cutting direction and is intended for operations that require that orientation. What are the critical dimensions to check before ordering? Key dimensions are overall length 170 mm, holder height 32 mm and head width 40 mm; these determine reach and clearance in the chosen toolpost. Which shank or mounting reference applies to this holder? The product is referenced with shank designation P19, which should be matched to the lathe’s toolholding system for correct fitment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable mounting, straightforward indexable insert replacement and a compact overall length for reliable rear-facing countersinking — order directly via Metav Werkzeuge or consult our technical advisors for application guidance. Back countersink C104TM by Teknik Makina — 20 mm shank, compatible with CCMT 060204 inserts The Back countersink C104TM is an indexable tool designed for rear-facing countersinking and light back-boring tasks on turning centres and lathes Compatible with CCMT 060204 inserts 20 mm shank diameter 26 mm max cutting diameter Torx M2,5x5,5 clamping screw Secure mounting for repeatable rear countersinking The body is engineered to provide a stable tool position during back-facing operations, with a 20 mm shank and a 132 mm overall length that balance reach and stiffness. The single cutting edge construction with 1 cutting edge promotes predictable chip evacuation and a controlled surface finish, which is particularly useful when reversing onto a workpiece shoulder. The modest mass of the tool contributes to less vibration during machining, resulting in improved concentricity and consistent process control. Fast insert changes and reliable clamping The tool accepts indexable inserts CCMT 060204, allowing quick replacement without complex regrinding. The insert is secured with a Torx M2,5x5,5 clamping screw and requires a T8 key for tightening, simplifying maintenance routines and reducing downtime. Indexable systems like this separate the cutting geometry from the body, which lowers per-cutting-edge cost and speeds up setup when different edge geometries are needed for varying materials. Precise cutting range for typical turning tasks With a 26 mm cutting diameter as the specified maximum and a nominal 17 mm diameter body dimension, the tool covers a practical range for rear countersinks and small back-boring operations. The defined cutting diameter helps in process planning and toolpath programming, enabling efficient cycle-time estimates and predictable material removal. The straightforward geometry reduces the need for complex coolant strategies while maintaining a reliable surface quality. Predictable performance and workshop benefits Weighing 0.261 kg, the tool offers an easy balance between rigidity and manoeuvrability, which is advantageous for shops seeking repeatable results without excessive tool mass. The indexable system minimises inventory complexity by allowing a single holder to serve multiple insert types for varied operations. Supplied as a compact tool body, it supports a streamlined tooling setup and contributes to consistent part tolerances across production runs. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools Back countersink C104TM into existing workflows or to arrange a supply from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: C104TM Manufacturer: Teknik Makina ECLASS: 21180208 Core measurements Shank diameter: 20 mm Overall length: 132 mm Max cutting diameter: 26 mm Nominal diameter: 17 mm Cutting edges: 1 Weight: 0.261 kg Design & compatibility Indexable inserts: CCMT 060204 Clamping screw: Torx M2,5x5,5 Torx key size: T8 Application: back countersinking / rear-facing operations FAQ Which inserts fit the tool? The tool accepts CCMT 060204 indexable inserts; this insert type is specified for the Back countersink C104TM and allows rapid replacement. What size shank does the body have? The holder is supplied with a 20 mm shank, suitable for toolposts and adaptors that accept 20 mm tool shanks. What is the maximum cutting diameter? The maximum cutting diameter is 26 mm, which defines the upper limit for countersinking and small back-boring tasks with this holder. Which screw and key are used for clamping the insert? Insert clamping is performed with a Torx M2,5x5,5 screw and requires a T8 key for tightening and removal. Is the tool suitable for CNC turning centres? Yes, the design of the holder and its indexable insert system make it appropriate for use on lathes and CNC turning centres in rear-facing countersinking applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining LOGU 0303 indexable insert compatibility with built-in internal coolant, this shank milling cutter provides improved chip evacuation and consistent surface finish for compact machining setups; its 16 mm shank and 150 mm overall length ensure stable clamping and reliable runout. Order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Shank milling cutter S676-1TM – 17 mm diameter, internal coolant (Teknik Makina) A robust shank milling cutter S676-1TM designed for LOGU 0303 indexable inserts, ideal for compact milling and precise slotting in production and workshop environments 17 mm diameter for compact setups Internal coolant for effective chip evacuation Compatible with LOGU 0303 inserts (Kyocera) 16 mm shank, 150 mm overall length Consistent metal removal with optimised coolant flow Designed for reliable material removal, this shank cutter combines a 17 mm diameter with a 50 mm cutting length to balance accessibility and cutting stability. The integrated internal coolant channel directs coolant precisely to the cutting zone, which reduces built-up edge and promotes uniform surface quality. With 2 cutting edges, the tool offers predictable engagement and simplified feed strategies, making it suitable for repetitive milling operations where consistent part finish and predictable tool life are priorities. Fast insert changes and secure fastening for high uptime Compatibility with LOGU 0303 indexable inserts and standard fastenings reduces downtime. The insert seat accepts Kyocera-format inserts and is secured by an M3x7 Torx screw tightened with a T8 key, enabling quick, repeatable insert replacement. This design minimises setup time and simplifies maintenance, translating to measurable productivity gains on jobs requiring frequent index changes or batch processing of similar components. Compact design that supports stable clamping in CNC setups A modest 150 mm overall length combined with a 16 mm shank delivers a compact tool geometry that reduces overhang and improves axial stiffness. The low mass and balanced geometry, together with precise seating for inserts, contribute to reduced vibration and improved concentricity in milling spindles. Supplied by Teknik Makina, the cutter is intended for workshop and industrial contexts where space-efficient tooling must still deliver repeatable results and straightforward handling. For procurement and technical advice on the Teknik Makina S676-1TM with internal coolant and LOGU 0303 compatibility, contact Metav Werkzeuge in Emmerich for fast, expert guidance Technical data SKU: S676-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Label: 17mm shank milling cutter LOGU 0303 L150mm with internal coolant Weight: 0.219 kg Dimensions & core specifications Diameter: 17 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length (shank of cutting): 50 mm Number of cutting edges: 2 Torx key: T8 Torx screw: M3x7 Designs & special features Internal coolant: Yes Compatible inserts: LOGU 0303 Compatible insert manufacturer: Kyocera Product designation: Shank milling cutter for indexable inserts FAQ What inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; it is compatible with Kyocera-format inserts for straightforward integration with existing tooling systems. Does the tool supply coolant to the cutting edge? Yes, the S676-1TM features internal coolant that channels fluid directly to the insert seat for improved chip control and cooling. What are the shank and overall lengths? The tool has a 16 mm shank and a 150 mm overall length, offering a compact geometry for reduced overhang. How many cutting edges does the tool use? This cutter uses 2 cutting edges, providing a balance between cutting stability and efficient material removal. Which torque tool is required to change inserts? Insert clamping uses an M3x7 Torx screw which is tightened with a T8 Torx key for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Available Technical Details: Item: End Mill Brand: Teknik Makina Order Number: S478TM usable with BLMP 0603 Indexable Inserts of Taegutec Diameter: 17mm Total length: 150mm Cutting Edges: 2 Weight: 0.244kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of reliable indexable milling performance with internal coolant and a compact 17 mm diameter for consistent chip control and reduced tool change frequency; order or request technical advice directly via Metav Werkzeuge for tailored support. Shank Milling Cutter S194-1TM — 17 mm diameter with internal coolant, for XNEX 0403 indexable inserts by Teknik Makina The Shank Milling Cutter S194-1TM is an indexable insert holder designed for precision milling tasks in production environments, combining compact geometry with coolant-fed insert seating for stable cutting and straightforward insert changes 17 mm diameter with 16 mm shank Internal coolant for stable chip evacuation Compatible with XNEX 0403 inserts (SECO) Two cutting edges for efficient removal Stable cutting performance through coolant-fed insert design The cutter's defining advantage is the internal coolant feed directly to the insert seat, which improves lubrication at the cutting zone and supports controlled chip formation. With a 17 mm diameter and a 16 mm shank, the tool offers a compact footprint while maintaining rigidity; this is particularly useful in confined tool setups or where minimal overhang is required. Internal coolant reduces heat build-up and can contribute to more consistent surface finish and longer insert life, thereby lowering tooling costs over multiple production cycles. Designed to increase productivity and reduce downtime Carrying two cutting edges and a 30 mm cutting length, the holder allows efficient material removal while keeping insert changes fast and predictable. The use of XNEX 0403 indexable inserts means worn cutting edges are replaced rather than the entire tool, which shortens maintenance intervals and keeps machines running. The secure fixing via a Torx T8 key and M2.5x6.5 Torx screw ensures repeatable seating torque and reliable clamping force, limiting the risk of insert movement under load and supporting consistent cycle times. Compatibility, handling and workshop integration The shank profile with a 16 mm shank diameter fits standard holders and collet systems, simplifying integration into existing tool magazines and reducing adapter complexity. The tool's overall length of 150 mm and modest weight of 0.225 kg make it suitable for automated tool changers and multi-op setups where balance and repeatability matter. Compatibility with inserts from the SECO family expands the available geometries and grades for different workpiece materials and machining strategies, enabling tailored cutting solutions for a range of applications. For machining reliability backed by expert advice and European logistics, contact Metav Werkzeuge to discuss the Teknik Makina S194-1TM shank milling cutter and arrange purchase or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S194-1TM Product type: Shank milling cutter For inserts: XNEX 0403 indexable inserts Compatible insert manufacturer: SECO Core specifications Diameter: 17 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.225 kg Features & compatibility Internal coolant Torx key: T8 Torx screw: M2.5x6.5 Label: 17mm shank cutter XNEX 0403 L150mm with internal cooling SKU: S194-1TM Manufacturer: Teknik Makina FAQ What inserts are compatible with this shank milling cutter? The shank milling cutter accepts XNEX 0403 indexable inserts; the tool is specified to be compatible with inserts from SECO for a wide choice of grades and geometries. How is coolant supplied to the cutting edge? Coolant is fed internally to the insert seat on the S194-1TM, providing targeted lubrication and improved chip evacuation at the cutting zone. Which toolholders are suitable for this cutter? Holders or collets that accept a 16 mm shank diameter are suitable; the design supports common chucking systems used in milling spindles and toolholders. What fastener is used to secure the inserts? Inserts are clamped with a Torx screw specified as M2.5x6.5, tightened using a T8 Torx key to ensure repeatable clamping and seating. Can this cutter be used in automated tool changers? Yes. With an overall length of 150 mm and a weight of 0.225 kg, the cutter is compatible with automated tool-change systems where compact, balanced tools are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise material separation, flexible insert compatibility and streamlined procurement for uninterrupted production. The combination of a standardised ISCAR-compatible interface and a clear SKU reference (KL17TM) simplifies tool inventory and replacement. Order the parting blades directly via Metav Werkzeuge or ask their consultants if needed. Parting blades KL17TM — ISCAR-compatible parting and grooving blades by Teknik Makina The Parting blades KL17TM are precision-engineered parting blades intended for accurate grooving and parting operations where standard insert compatibility and straightforward procurement are decisive ISCAR-compatible insert interface Designed for grooving and parting operations SKU KL17TM for straightforward procurement Reduce scrap with consistent, controlled cuts High-priority for production environments is repeatable performance. These blades provide consistent kerf control and stable engagement with the workpiece, reducing the risk of chatter and limiting material waste. By using a standardised insert interface, the component enables predictable cutting behaviour, which in turn supports shorter cycle times and fewer reworks. The configuration therefore favours shops aiming to optimise throughput without compromising component tolerances or surface finish. Faster set-up and fewer spare parts Compatibility with a widely used insert system brings direct logistical benefits. An ISCAR-compatible interface allows the mounting of commonly available inserts, reducing the number of different spare items that must be stocked. This insert standardisation shortens changeover times and simplifies tool management for maintenance teams and purchasing departments alike. Clear identification via the KL17TM SKU supports fast reordering and rapid replacement, keeping machine downtime to a minimum and preserving overall equipment effectiveness. Supply reliability and a partner for precision Beyond the component itself, procurement certainty matters. Metav Werkzeuge acts as a quality filter for the European market, combining an extensive product range with dependable logistics from Emmerich. This supply model supports small and large workshops by making high-precision solutions accessible and by reducing supplier complexity. The result is improved planning reliability and fewer delivery surprises, which is particularly valuable for production lines where continuity and part quality are non-negotiable. For procurement advice or to order Teknik Makina KL17TM parting blades, contact Metav Werkzeuge's specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KL17TM Product type: Parting blades (Stechschwerter) Manufacturer: Teknik Makina Facts eClass: 21181018 SKU: KL17TM UID: KL17TM Special features Compatible with ISCAR indexable inserts Intended for grooving and parting operations Category: Machining › Parting blades FAQ Are these blades compatible with ISCAR inserts? Yes. The KL17TM parting blades feature an ISCAR-compatible insert interface, allowing the use of widely available ISCAR indexable inserts. What applications are suitable for these blades? The blades are intended for grooving and parting operations where standardised insert interchangeability and predictable kerf control are required. How does the KL17TM simplify tool management? Clear SKU labelling and compatibility with a common insert system reduce inventory complexity and speed up changeovers, which keeps downtime low. Can these blades be ordered through Metav Werkzeuge? Yes. The KL17TM is available via Metav Werkzeuge, which provides procurement support and reliable European distribution. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, reliable fastening solution: the locking screw combines an M6 thread, a 14 mm head and a 17 mm total length to secure measuring instruments and small fixtures; order directly via Metav Werkzeuge or consult the technical team for application advice. Locking screw TC052TM — locking fastener with M6 thread and 14 mm head (Teknik Makina) Locking screw TC052TM is a compact locking fastener designed for precision calipers and small workshop fixtures, offering a robust M6 thread and compatibility with a 4 mm hex key. M6 thread for secure fastening 14 mm head diameter Total length 17 mm Requires 4 mm hex key Reliable clamp action for measurement tools The compact fastener delivers consistent clamping force thanks to its M6 thread, which provides predictable tightening behaviour in repetitive assembly. As a small locking component intended for measuring instruments and light fixtures, the fastener’s geometry and thread form support repeatable positioning and minimal play, helping to maintain measurement integrity. The low mass of 0.1 kg reduces added weight on delicate slides while the 14 mm head gives adequate bearing surface without obstructing nearby parts. Simple handling and workshop compatibility Maintenance and replacement are straightforward: the part is operated with a 4 mm hex key, a common workshop tool, so integration into existing workflows is economical and rapid. The 17 mm total length keeps engagement clear and accessible in shallow thread applications, while the M6 thread aligns with standard metric fixtures. This combination reduces machining or modification work and supports quick assembly in production or service environments. Durable performance where precision counts Although material details are not specified, the component’s dimensions and thread standard indicate suitability for clamping tasks in measuring devices and jigs. The robust thread specification and head size ensure reliable locking under normal workshop loads and frequent retightening cycles. For processes where secure, low-profile fastening is required, this locking screw functions as a small but decisive element in achieving stable setups and repeatable results. For procurement or technical clarification on the Teknik Makina locking screw TC052TM, contact Metav Werkzeuge for tailored advice and ordering assistance — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: TC052TM Manufacturer: Teknik Cutting Tools SKU: TC052TM Dimensions & weight Diameter: 14 mm Thread: M6 Total length: 17 mm Weight: 0.1 kg eClass: 21189290 Compatibility & features Suitable for precision calipers — Allen key size 4 mm Compact locking fastener for small fixtures Designed for metric M6 applications FAQ What thread does this locking screw use? The locking screw TC052TM is specified with an M6 thread, suitable for standard metric fixings. Which tool is required to tighten the component? Assembly and adjustment are carried out with a 4 mm hex key; the locking screw TC052TM is designed for this common Allen key size. What are the key dimensions of the fastener? The fastener has a head diameter of 14 mm and a total length of 17 mm, with an overall weight of 0.1 kg. Is this locking screw suitable for calipers and measuring instruments? Yes — the locking screw TC052TM from Teknik Makina is intended for use with precision calipers and similar small fixtures where a compact M6 fastening is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact M6 fastening that secures measuring jaws with minimal bulk and straightforward hex-key operation; combine this with rapid availability via Metav Werkzeuge for a reliable spare-part supply or technical clarification. Locking screw TH617TM — M6 thread, 17 mm overall length A Locking screw TH617TM designed for secure fastening on precision measuring tools and small assemblies, operable with a 2 mm Allen key for fast adjustment. Standard M6 thread for metric fittings Compact overall length of 17 mm Compatible with 2 mm Allen key Precision fastening that reduces measurement variation A compact locking screw with an M6 thread provides a standardised connection that integrates easily with metric components on measuring instruments. The short 17 mm overall length keeps the fastener profile low, which is beneficial where clearance is limited and where protrusion can affect alignment. By using a metric thread, replacement becomes straightforward and compatible with many existing caliper and gauge assemblies, supporting consistent measurement behaviour and simplified inventory management. Simple maintenance and secure adjustment for workshop use Adjustment is performed with a 2 mm Allen key, allowing quick tightening and controlled torque without specialised tools. The functional design supports repeatable locking of movable parts on precision calipers, minimising slippage during repeated use. With a listed weight of 0.1 kg, handling and storage are uncomplicated, and the fastener’s low mass makes it suitable for portable instruments and compact fixtures where added bulk is undesirable. Robust fit for production and service environments Engineered as a straightforward locking element, this part promotes reliable clamping in assembly and repair workflows and helps maintain measurement integrity across operations. The TH617TM unit from Teknik Cutting Tools is a practical spare for maintenance kits and calibration benches, offering a clear benefit in uptime and part standardisation. For machines and hand tools where controlled positioning is essential, this locking component contributes to operational consistency and easier servicing. For a compatibility check or technical clarification regarding the Teknik Cutting Tools locking screw TH617TM, contact Metav Werkzeuge GmbH in Emmerich for expert advice and reliable supply. Technical data Article number: TH617TM Eclass: 21189290 Facts Thread: M6 Overall length: 17 mm Weight: 0.1 kg Special features Operated with 2 mm Allen key Metric fastening for standard fittings Designed for locking function on measuring instruments FAQ What thread size does the locking screw use? The locking screw is supplied with an M6 metric thread, suitable for standard M6 mating components. Which tool is required to tighten the screw? Tightening and adjustment are performed with a 2 mm Allen key, matching the screw’s internal hex drive. Is the component suitable for precision calipers? Yes — the TH617TM locking screw is intended for use on precision measuring assemblies and is compatible with caliper-style locking applications. What are the overall dimensions and weight of the screw? The fastener has an overall length of 17 mm and a listed weight of 0.1 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, secure tool that combines internal coolant and a 17 mm diameter for reliable chip control and stable machining results; order the item directly through Metav Werkzeuge or consult their specialists for application advice. Screw-in milling cutter for XNEX 0403 indexable inserts — 17 mm, internal coolant (Teknik Makina) Screw-in milling cutter for light to medium-duty milling where compact size and coolant through capability improve chip evacuation and tool life. 17 mm diameter for compact milling heads Internal coolant for improved chip evacuation Threaded M8 shank for secure mounting Compatible with XNEX 0403 indexable inserts Consistent cooling and cleaner chips for longer tool life The integrated internal coolant channel directs lubricant precisely to the cutting zone, reducing heat build-up and aiding chip evacuation. This targeted cooling helps to maintain cutting-edge geometry and limits thermal wear, which in turn supports longer tool life and more predictable tool-change intervals. For workshop environments where downtime is costly, the combination of controlled cooling and compact geometry delivers a measurable improvement in machining consistency. Robust mounting and accurate cutting geometry for repeatable results Designed with a M8 thread and a thread height of 16 mm, the tool provides a secure mechanical connection to compatible holders. The head features 2 cutting edges with a cutting-edge height of 25 mm, offering balanced cutting forces and low vibration during operation. The supplied T8 Torx interface and M2.5x6.5 Torx screw ensure straightforward assembly and stable fastening of the insert seat. Together, these features reduce runout and support repeatable surface finishes in serial production. Small package, wide workshop compatibility With a compact overall length of 41 mm and a lightweight construction at 0.035 kg, the milling head is suitable where reach and clearance are limited. It accepts XNEX 0403 indexable inserts and is matched to inserts from Tungaloy, enabling simple integration into existing insert inventories. The compact design is particularly useful in setups requiring agile toolpaths or when retrofitting machines with space constraints, while the internal coolant option supports operations that demand improved thermal control. Contact Metav Werkzeuge for tailored application guidance on the Teknik Makina screw-in milling cutter and to confirm the best insert options for the task Technical data SKU: VT244TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter For inserts: XNEX 0403 Facts Diameter: 17 mm Overall length: 41 mm Weight: 0.035 kg Thread: M8 Thread height: 16 mm Number of cutting edges: 2 Cutting-edge height: 25 mm Torx key: T8 Torx screw: M2.5x6.5 Special features Internal coolant Compatible with XNEX 0403 indexable inserts Compatible insert manufacturer: Tungaloy Manufacturer: Teknik Makina FAQ Which indexable inserts fit this tool? The tool accepts XNEX 0403 indexable inserts; it is designed for compatibility with Tungaloy inserts and is listed under SKU VT244TM. Is coolant available through the tool? Yes, the cutter features internal coolant, which supplies lubricant directly to the cutting zone for improved chip removal and reduced thermal stress. How is the cutter mounted to the holder? Mounting is via an M8 thread with a 16 mm thread height; the clamping screw uses a T8 Torx interface and an M2.5x6.5 screw to secure the insert seat. What are the key dimensions to check for machine fit? Key dimensions include the 17 mm diameter, an overall length of 41 mm, and a weight of 0.035 kg; refer to these when checking holder clearance and toolpath envelopes. Can this tool be used in confined or tight-reach applications? The compact overall length and light weight make it suitable for tight-reach situations where a small-diameter milling head and internal coolant are advantageous; see SKU VT244TM for reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid shank design combined with secure Torx clamping and proven compatibility with 4NKT 0603 indexable inserts for consistent productivity on CNC machines. Order through Metav Werkzeuge for reliable European supply and expert advice. Teknik Makina Shank milling cutter S472TM — 17 mm diameter, 2 flutes, for 4NKT 0603 indexable inserts The Shank milling cutter S472TM is a solid shank cutter designed for use with 4NKT 0603 indexable inserts, optimised for stable slotting and profile milling in CNC and machining-centre applications. Compatible with Taegutec 4NKT06 inserts 17 mm cutting diameter for mid-range routing 16 mm shank for high rigidity Secure Torx M3x6,5 clamping with T8 key Reliable clamping and insert compatibility for fast changeovers The Teknik Makina tool is engineered around fast, reproducible insert clamping. The combination of a Torx M3x6,5 clamping screw and a T8 key ensures secure seat retention and simple replacement of the indexable inserts. As the cutter accepts Taegutec type 4NKT06 inserts, shops benefit from broad insert availability and flexible grade choice, reducing downtime and simplifying inventory management for repetitive series production. Precision geometry that improves chip control and surface finish With a 17 mm cutting diameter and 2 flutes, this milling tool delivers a balance between material removal rate and surface quality. The geometry is optimised to promote consistent chip evacuation and reduced cutting forces, which helps to maintain cycle-time stability. A 22 mm cutting length provides sufficient engagement for common slotting and shoulder operations while avoiding excessive overhang that would compromise accuracy. Built for rigidity and repeatable accuracy in CNC set-ups A 16 mm shank diameter and a total length of 150 mm overall length provide a compact, stiff toolholder interface that reduces runout and deflection during heavier passes. The assembly’s modest mass — approximately 0.241 kg — makes it easier to handle during tool changes and minimises inertial loading on high-speed spindles. This mechanical stability translates into predictable tool life and repeatable dimensional results across batches. Supply reliability and expert backing from Metav Delivered via Metav’s European distribution network, the cutter benefits from a stocked and quality-filtered supply chain centred in Emmerich. Metav’s long-standing presence and broad product range support workshop consolidation and make it straightforward to source matching inserts, spares and complementary tooling. Confidence in supply helps maintain planned production schedules and reduces the risk of unplanned machine downtime. Contact Metav Werkzeuge to discuss suitability for specific materials and machining strategies, or to arrange supply of Teknik Makina cutting tools — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: S472TM Manufacturer: Teknik Makina Product: Shank milling cutter for 4NKT 0603 indexable inserts ECLASS: 21180806 ETIM: EC011860 Facts Cutting diameter: 17 mm Shank diameter: 16 mm Cutting length: 22 mm Overall length: 150 mm Number of flutes: 2 Weight: 0.241 kg Torx screw: M3x6,5 Torx key: T8 Special features Compatible with Taegutec 4NKT06 inserts Suitable for indexable insert machining Files available: 62de7e510f56dbb4de4dbf07, 62de7ee6bd24461b3d5f7a72 SKU: S472TM FAQ What inserts fit this shank milling cutter? The cutter accepts 4NKT06 indexable inserts and is listed as compatible with Taegutec inserts for that size. Is the clamping screw type industry standard? Yes, the tool uses a Torx M3x6,5 clamping screw operated with a T8 key for standardised, secure insert retention. What are the key dimensions to check for holder compatibility? Confirm a 16 mm shank holder and a toolholder able to accommodate a 150 mm overall length; these dimensions match the cutter’s design. Can this tool be used for slotting and profile milling? The 17 mm diameter and 22 mm cutting length make the cutter suitable for typical slotting and shoulder milling operations in CNC environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable milling solution that combines secure insert clamping, straightforward integration into existing toolholders and dependable repeatability for batch work. Benefit from the combination of precise compatibility with LNMU 0303 inserts and robust shank dimensions for stable machining — order directly via Metav Werkzeuge or consult our specialists for tailored advice. Shank cutter S672TM – indexable insert milling cutter, Ø17 mm, shank Ø16 mm (Teknik Makina) The Shank cutter S672TM is a purpose-built indexable milling head for machining tasks that require rapid insert changes and consistent cutting performance across production runs Compact Ø17 mm cutter diameter Shank Ø16 mm for secure toolholder fit Compatible with LNMU 0303 indexable inserts Torx screw M2.5x7 with T8 key for reliable clamping Engineered for consistent, repeatable cutting performance This indexable milling head is designed around the proven LNMU 0303 insert system, delivering controlled chip formation and predictable cutting forces through its 2 cutting edges. The replaceable-insert concept reduces downtime because only the insert needs replacing once worn, rather than the entire cutter, which improves overall tool economy. A secure clamping arrangement using a Torx screw M2.5x7 tightened with a T8 key gives a repeatable seat and minimises insert movement under load, supporting stable cutting results and consistent surface finish in serial production. Built to integrate quickly into existing setups With a cutter diameter of Ø17 mm, a shank Ø16 mm and an overall length of 150 mm, this tool fits common toolholders and offers the rigidity required for precision milling tasks. The close fit between shank and holder reduces runout and vibration, translating into improved concentricity and longer insert life. Compatibility with the TNGLY-OKE insert family ensures straightforward procurement of replacement inserts and predictable tool change procedures, making the unit a practical choice for workshop and light industrial CNC applications where quick set-up and repeatability matter. Supply reliability and technical support from Metav Distributed by Metav Werkzeuge, this indexable cutter benefits from a supply chain grounded in the company’s commitment to democratise precision. Metav’s experience across more than 48,000 customers and an extensive range of over 250,000 products means streamlined procurement and dependable stock handling from Emmerich. For buyers seeking predictable delivery and factual product information, Metav acts as a practical partner for integration, offering technical clarification and parts sourcing to keep production moving without unnecessary complexity. For secure, compatible milling with LNMU 0303 inserts, request the Teknik Makina S672TM via Metav Werkzeuge or contact our specialists at Metav Werkzeuge for precise application advice — Metav Werkzeuge, Emmerich Technical data Article number: S672TM Manufacturer: Teknik Makina Type: Shank cutter for LNMU 0303 indexable inserts eClass: 21180806 ETIM: EC011860 Facts Cutter diameter: 17 mm Shank diameter (Ø): 16 mm Overall length: 150 mm Cutting edges: 2 Special features Compatible inserts: LNMU 0303 Compatible insert manufacturers: TNGLY-OKE Clamp screw: M2.5x7 Torx key size: T8 FAQ What inserts does this milling head accept? The shank cutter S672TM accepts LNMU 0303 indexable inserts; it is also listed as compatible with inserts from the TNGLY-OKE family. Which toolholder size is required for installation? This cutter has a shank Ø16 mm, so a toolholder or collet rated for a 16 mm shank is required for secure mounting. How is the insert secured to the cutter? An M2.5x7 Torx screw secures the insert; the screw is tightened using a T8 Torx key to ensure a repeatable and reliable clamp. Is the cutter suitable for high-volume production runs? Yes — the replaceable-insert design and the robust shank-to-holder fit support repeatability and reduced downtime, making it suitable for serial production and frequent tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, industry-ready drilling solution that combines repeatable accuracy and broad insert compatibility for efficient production. With a stable 25 mm shank and a 17 mm cutting diameter, the tool delivers secure clamping and consistent hole quality; order directly via Metav Werkzeuge or consult the Emmerich team for application advice. U817TM Indexable Insert Drill (Ø 17 mm, 25 mm shank) — Teknik Makina The U817TM is an indexable insert drill body designed for precision holemaking in industrial machining, offering a compact overall length and compatibility with common SPMG 0602 inserts. 17 mm cutting diameter for precise holes 25 mm shank for stable clamping Compatible with SPMG 0602 indexable inserts 51 mm cutting length, overall 127 mm Stable clamping for consistent hole accuracy A substantial 25 mm shank and compact overall length ensure the tool holds securely in standard toolholders, reducing runout and vibration. This mechanical stability directly improves repeatability in serial production and lowers scrap rates. The relatively low weight (0.318 kg) balances inertia and rigidity, helping to maintain concentricity during each cycle. For operations where consistent hole quality matters, the stable clamping reduces setup time and contributes to a predictable production process. Broad insert compatibility for cost-efficient tooling The body accepts SPMG 0602 indexable inserts and is compatible with inserts from Taegutec and YG-1, making replacement tooling readily available and cost-effective. Using common insert families simplifies inventory management and allows quick swap-outs when edge wear occurs, lowering downtime. The compatibility with industry-standard insert formats supports a straightforward procurement strategy while enabling users to select grades tailored to the workpiece material or production speed. Cutting length that supports deeper single-pass holes With a 51 mm cutting length and an overall length of 127 mm, this drill body is suited to deeper hole requirements that still fit within standard machining envelopes. The extended cutting length reduces the need for multiple passes in shallow-to-moderate depth drilling tasks, which can shorten cycle times and reduce tool indexing during sequence operations. As a result, workshops can maintain throughput without compromising hole integrity. Ready for workshop integration and reliable supply Designed as a practical solution for industrial machining, this indexable tool body benefits from supply and quality assurance through Metav’s European distribution. Metav’s role as a quality filter in Emmerich, together with a wide product range, supports dependable replenishment and consistent product standards. The combination of available insert compatibility and Metav’s distribution network helps to keep tooling lines moving while simplifying vendor management for machining departments. Contact Metav Werkzeuge for application-specific guidance and availability of the U817TM indexable insert drill; the Emmerich team can confirm compatibility with existing toolholders and advise on insert grades at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number / SKU: U817TM Manufacturer: Teknik Makina Diameter: 17 mm Shank diameter: 25 mm Cutting length: 51 mm Shank length: 56 mm Overall length: 127 mm Weight: 0.318 kg Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec; YG-1 Facts Ø 17 mm Cutting length 51 mm Shank Ø 25 mm Shank length 56 mm Overall length 127 mm Weight 0.318 kg Special features Indexable insert drill body Accepts SPMG 0602 inserts Compatible with Taegutec and YG-1 inserts SKU U817TM Manufacturer Teknik Makina FAQ Which insert type fits this drill body? The U817TM accepts SPMG 0602 indexable inserts; compatible manufacturers include Taegutec and YG-1. What shank size is required for clamping? The drill body features a 25 mm shank, designed for secure clamping in standard toolholders that accommodate this shank diameter. How deep can the tool cut in a single pass? The tool provides a 51 mm cutting length within an overall length of 127 mm, supporting deeper single-pass holes within that envelope. Who manufactures the drill body and who supplies it in Europe? The drill body is made by Teknik Makina and is distributed via Metav Werkzeuge for the European market as the listed SKU U817TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable indexable performance, secure machine clamping and simple insert compatibility for consistent hole quality and efficient changeovers. Order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. Indexable insert drill — Ø17 mm, 25 mm shank (Teknik Makina) The indexable insert drill for precision drilling in industrial CNC and toolroom environments, designed for use with SPMG 0602 inserts and compatible with common insert brands Indexable for SPMG 0602 inserts Ø17 mm cutting diameter 25 mm shank for secure clamping 68 mm cutting length for deep holes Consistent hole quality for uninterrupted production The indexable insert drill delivers repeatable hole geometry by combining a defined cutting edge form with a stable tool body. Using SPMG 0602 inserts keeps the cutting geometry constant across insert changes, reducing variability between holes and lowering scrap rates. With a Ø17 mm cutting diameter and a 68 mm cutting length, the tool is engineered to maintain concentricity and surface finish in standard production runs while facilitating predictable machining parameters for cycle-time planning. Robust mounting to protect spindle investment A substantial 25 mm shank and an extended shank engagement of 56 mm ensure secure clamping in industrial toolholders and reduce the risk of vibration under load. The combination of a solid mounting interface and a 144 mm overall length provides the necessary reach without compromising rigidity, which is crucial when running long series or when working close to fixturing. The measured mass of 0.333 kg also contributes to stable dynamic behaviour during high‑speed cycles. Fast changeovers and broad insert compatibility Designed for indexable cutting, the tool accepts SPMG 0602 inserts and is compatible with inserts from established manufacturers such as Taegutec and YG‑1. This flexibility simplifies stocking strategy and minimises downtime: worn inserts are replaced quickly, restoring cutting performance without regrinding. Spare inserts and alternative grades can be selected to match material demands or to favour longer life or higher metal removal rates, depending on production priorities. Practical fit for workshop and CNC environments This drill is suitable where reliability and straightforward maintenance are priorities. The combination of proven insert geometry and a standard shank size makes the tool an efficient choice for shops that need good repeatability and ease of service. For assemblies and tool cabinets where changeability and compatibility are critical, the product reduces the number of specialised drills required and supports streamlined inventory management. For application advice or to secure this Teknik Cutting Tools indexable insert drill (SKU U717TM) for your production line, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com for tailored guidance and next‑day shipping options Technical data SKU: U717TM Name: Indexable insert drill Manufacturer: Teknik Makina Designation: Vollbohrer Core data Cutting diameter: 17 mm Cutting length: 68 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 144 mm Weight: 0.333 kg Special features Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec, YG‑1 FAQ Which inserts fit this drill? The tool is specified for SPMG 0602 inserts; compatible grades and sizes from Taegutec and YG‑1 are suitable and commonly used. What is the exact cutting diameter and reach? The cutting diameter is 17 mm with a cutting length of 68 mm and an overall length of 144 mm. Is the shank suitable for standard toolholders? Yes. The 25 mm shank and its 56 mm engagement length are designed for secure clamping in standard industrial holders. What is the SKU for ordering or reordering? Order using SKU U717TM to ensure the correct indexable insert drill configuration. Can different insert grades be used for specific materials? Different grades for SPMG 0602 inserts may be selected to optimise life or cutting performance; consult available grades from Taegutec or YG‑1 for suitability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, exchangeable‑insert drilling solution that combines precision with economical tooling: the tool offers a 17 mm cutting diameter, a 51 mm cutting length and a 25 mm shank for secure clamping. Order or request technical advice through Metav Werkzeuge for reliable supply and expert support. Teknik Makina solid drill U012TM — 17 mm, SPMT 0602 indexable insert compatible The solid drill U012TM is a precision drilling tool designed for use with SPMT 0602 indexable inserts and medium‑depth holemaking in industrial machining environments. 17 mm cutting diameter Compatible with SPMT 0602 inserts 25 mm shank diameter 127 mm overall length Precision and productivity in one compact tool The U012TM delivers a focused combination of cutting diameter and secure shank geometry that supports repeatable hole quality and reduced setup time. With a 17 mm diameter and 51 mm cutting length, this tool is aimed at operations where consistent accuracy and economical indexable inserts are preferred to solid carbide alternatives. The 25 mm shank ensures stable clamping in standard toolholders, minimising vibration and improving surface finish. The result is a dependable balance of tool life and cost efficiency that supports continuous production runs. Quick indexable‑insert serviceability for less downtime Designed for SPMT 0602 indexable inserts, the drill accepts widely available Korloy inserts, allowing fast re‑indexing and low per‑hole tooling cost. Using interchangeable inserts reduces the need for full‑tool replacement and speeds up maintenance cycles, which has a direct effect on overall equipment effectiveness. The insert compatibility also facilitates inventory management across toolrooms that already stock Korloy plates, simplifying replenishment and decreasing machine downtime during tool changeovers. Practical handling, mounting and workshop fit The tool’s 127 mm overall length and a shank engagement length of 56 mm suits medium‑reach drilling while keeping overhang manageable for conventional CNC turret or spindle setups. Weighing 0.313 kg, the component is easy to handle and manoeuvre during loading and clamping operations. The combination of a standardised 25 mm shank and a compact overall profile allows flexible deployment across various toolholders without the need for special adaptors, helping maintain throughput in busy metalworking environments. Contact Metav Werkzeuge for personalised technical advice on the Teknik Cutting Tools solid drill U012TM and secure dependable supply from Emmerich for your next production cycle Technical data Article number: U012TM Manufacturer: Teknik Makina Diameter: 17 mm Cutting length: 51 mm Shank diameter: 25 mm Shank engagement length: 56 mm Overall length: 127 mm Weight: 0.313 kg Special features Compatible insert type: SPMT 0602 Compatible insert manufacturer: Korloy Files available: 2 (IDs: 62de7dd60f56dbb4de4dbedc, 62de7ec2148ec6b71020ffa4) FAQ What insert type does this drill use? The drill is specified for SPMT 0602 indexable inserts; Korloy inserts are suitable and widely supported for this shank and seat design. Which shank size is required for secure clamping? A 25 mm shank diameter is standard for this tool, providing stable clamping in compatible holders and reducing runout during drilling. What is the usable cutting length? The tool provides a 51 mm cutting length, which is suitable for medium‑depth holes while keeping overhang low. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of precise bore control, quick insert replacement and secure clamping: the tool’s 17 mm cutting diameter with a 25 mm shank ensures stable spindle engagement while the 68 mm cutting length keeps chip evacuation predictable and efficient — order via Metav Werkzeuge or contact our consultants for tailored cutting data and process advice. Solid drill U602TM — 17 mm, 25 mm shank (Teknik Makina) The Solid drill U602TM is intended for industrial drilling tasks where repeatable hole quality and rapid insert servicing are required, compatible with Korloy insert systems for flexible workshop use 17 mm diameter for precise holemaking 68 mm cutting length for medium-deep holes 25 mm shank for secure clamping Greater throughput with consistent hole quality The U602TM is engineered to deliver reliable concentricity and reduced runout thanks to its rigid shank geometry and balanced overall length. A stable clamping interface provided by the 25 mm shank translates into less vibration at the spindle, which improves surface finish and extends tool life. For production environments where cycle time and repeatability matter, the combination of a precise 17 mm diameter and controlled chip formation helps to keep rejects and rework to a minimum while maintaining machining efficiency. Reduced downtime through replaceable inserts Compatibility with Korloy WCM-0302 inserts allows fast, on-machine edge changes instead of full-tool replacement. The insert concept means cutting edges can be renewed in seconds, reducing inventory cost and machine downtime. For teams unfamiliar with indexable systems: replaceable inserts are small carbide cutting pieces mounted into the drill tip; worn inserts are removed and replaced, restoring cutting geometry without regrinding. This approach yields a clear cost-per-hole advantage for medium- to high-volume batches. Designed for workshop robustness and control With an overall length of 144 mm and a measured weight of 0.328 kg, the tool offers a practical balance between reach and rigidity for general industrial applications. The 68 mm cutting length is optimised for medium-depth bores where chip evacuation and coolant access must be managed. The tool’s compact mass aids stability, while the standardised 25 mm mounting diameter ensures compatibility with common collet and chuck systems used across modern machine shops. Practical application notes and set-up guidance To exploit the tool’s capabilities, ensure correct clamping torque for the 25 mm shank and confirm insert seating for the WCM-0302 indexable cutters. Proper coolant flow and appropriate feed per revolution will support chip control and prevent premature edge wear; for exact cutting parameters and material-specific recommendations, consult the supplied technical datasheet or Metav Werkzeuge’s advisory service. The construction reduces handling time and supports uninterrupted production runs when paired with systematic insert stock management. For reliable integration into production, choose the Teknik Makina U602TM via Metav Werkzeuge — contact our consultants at Metav Werkzeuge for specific cutting data and application support. Technical data Article number: U602TM Manufacturer: Teknik Makina Product name: Solid drill (Vollbohrer) Compatible insert: WCM-0302 Compatible insert manufacturer: Korloy Shank diameter: 25 mm Cutting length: 68 mm Shank length: 56 mm Diameter: 17 mm Overall length: 144 mm Weight: 0.328 kg Core data Diameter: 17 mm Cutting length: 68 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 144 mm Weight: 0.328 kg Features & compatibility Compatible insert type: WCM-0302 Insert supplier: Korloy Indexable-insert system for fast edge changes Suitable for medium-deep bores Standard shank for common clamping systems FAQ What insert type does the tool use? The tool accepts WCM-0302 inserts; matching inserts from Korloy are recommended for best fit and performance with the U602TM. Is the shank compatible with standard collets? Yes, the 25 mm shank is a standard diameter that fits common collets and chucks used in general machining centres. What hole depth is recommended for this drill? The drill provides a 68 mm cutting length, which is optimised for medium-deep bores; depth should be planned to allow effective chip evacuation within that cutting zone. How does the insert system reduce operating cost? Replaceable inserts allow worn cutting edges to be exchanged quickly without replacing the full tool body, lowering tool inventory cost and reducing machine downtime for the U602TM. Can the drill be used for high-volume production? Yes — the combination of replaceable inserts and a rigid 25 mm shank supports repeatable results and efficient exchange cycles suited to batch production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise holemaking and reduced downtime through robust insert compatibility and a compact, stable shank design; order directly via Metav Werkzeuge or consult our specialists for application advice. Insert drill U105TM — indexable insert drill body, Ø 17 mm, 34 mm cutting length (Teknik Makina) The Insert drill U105TM is an indexable drill body engineered for reliable hole production in CNC and workshop environments, accepting Korloy WCM‑0302 inserts for efficient chip control and rapid insert changes. Ø 17 mm diameter for standard hole sizes 34 mm effective cutting length Compatible with Korloy WCM‑0302 inserts Consistent hole quality for uninterrupted production The drill body delivers repeatable results thanks to its Ø 17 mm nominal diameter and a 34 mm cutting length, which together provide a reliable cutting engagement for medium‑depth holes. The geometry of the indexable system ensures predictable chip evacuation and a steady cutting force, helping to maintain bore tolerance and surface finish. Where tolerance consistency is essential for downstream assembly, this design reduces the need for rework and supports a smoother production flow. Greater stability reduces tool wear and chatter A solid clamping interface with a 25 mm shank diameter and a 56 mm shank length improves rigidity in the toolholder, enabling higher feed stability and better vibration damping. The 110 mm overall length balances reach with stiffness, limiting overhang while still allowing access to typical workpieces. Improved stiffness lowers insert stress, extending insert life and cutting performance, which in turn reduces tooling costs and maintenance intervals. Fast insert changes and material‑flexible performance Compatibility with Korloy WCM‑0302 indexable inserts simplifies logistics and shortens changeover times; replacement inserts can be mounted quickly to restore cutting capacity. The insert system is suited to standard metalcutting workflows and supports efficient operations where rapid tool turnaround is prioritized. For workshops that rely on indexable tooling to keep cycle times low, the insert drill body provides a pragmatic balance between flexibility and throughput. Reliable supply and pragmatic workshop support Manufactured by Teknik Makina and supplied under SKU U105TM, the component weighs 0.293 kg, offering a compact solution that is easy to handle and fit in common toolholders. Partnering this tool with Metav Werkzeuge provides the benefits of an experienced distributor that focuses on accessible precision: broad inventory, tested quality and direct logistics from Emmerich ensure reliable replenishment and consistent product standards for industry and craft alike. Contact Metav Werkzeuge for tailored application guidance and to secure the Teknik Cutting Tools insert drill U105TM from our Emmerich stock for dependable production support Technical data SKU: U105TM Manufacturer: Teknik Makina Facts Diameter: 17 mm Cutting length: 34 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 110 mm Weight: 0.293 kg Special features Compatible inserts: WCM‑0302 Insert manufacturer compatibility: Korloy Tool type: indexable insert drill body Brand: Teknik Makina FAQ What insert size does this drill accept? The U105TM insert drill body accepts Korloy WCM‑0302 indexable inserts as specified for efficient replacement and chip control. Can the drill body reach deeper bores with extension holders? Extended setups can be used, but the U105TM is optimised for its 110 mm overall length to balance reach and stiffness for stable cutting. Which shank diameter is required for clamping? The tool is supplied with a 25 mm shank, which should be matched to a compatible toolholder for secure clamping and reduced runout. Is the U105TM suitable for automated CNC toolchanging? Yes, the indexable insert system and compact weight of 0.293 kg make the drill body suitable for CNC toolchanger environments where quick insert swaps are required. How does the insert system affect production uptime? Using Korloy WCM‑0302 inserts with the U105TM allows fast insert replacement, reducing downtime and maintaining consistent cycle times in production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine reliable insert compatibility with compact geometry and robust clamping for consistent hole quality in medium‑depth machining; order the indexable drill body directly via Metav Werkzeuge or consult our specialists for tailored advice. Indexable drill body U917TM – Ø 17 mm, 25 mm shank (Teknik Makina) A precise indexable drill body U917TM engineered for insert drilling with SPMG 0602 inserts, ideal for production shops and toolrooms requiring fast insert changes and steady machining performance Compatible with SPMG 0602 inserts Ø 17 mm drill diameter 25 mm shank for secure clamping 34 mm cutting length for effective depth Consistent hole quality thanks to insert compatibility The design centres on compatibility with SPMG 0602 indexable inserts, delivering repeatable edge geometry and predictable chip control. Matching the body to widely available insert grades from Taegutec and YG‑1 reduces set‑up variation and shortens qualification time for new operations. For production environments, this means fewer scrap cycles and a more consistent process window when replacing worn edges. Stable machining from compact, rigid geometry A 25 mm shank and slim overall profile combine to provide improved rigidity at the toolholder interface; the result is reduced vibration and better runout behaviour compared with longer, unsupported tools. The tool’s Ø 17 mm cutting diameter and 34 mm cutting length are balanced to offer a secure cutting zone for through‑holes and moderate depths while keeping the dynamic load on the spindle low. This geometry supports stable feeds and extends insert life where hole tolerances matter. Lower operating cost through indexable inserts Using an indexable concept simplifies maintenance: only the cutting inserts require replacement rather than the entire tool blank. The modular approach shortens machine downtime and reduces per‑hole tooling cost, delivering measurable economy for repetitive drilling tasks. The combination of widely available insert formats and a serviceable drill body promotes efficient inventory management in the workshop. Practical application and workshop fit The body is intended for metalworking shops and industrial production where reproducibility and quick intervention matter. With an overall length of 110 mm and a compact mass of 0.291 kg, the component is manageable in automated tool changers and manual set‑ups alike. Compatibility notes — interchangeable with insert grades from Taegutec and YG‑1 — ensure access to a broad range of cutting materials and geometries, supporting different workpiece materials and machining strategies. Contact Metav Werkzeuge for expert advice on the Teknik Makina U917TM indexable drill body and to arrange supply directly from Emmerich for seamless integration into the production line Technical data Article number: U917TM Manufacturer: Teknik Makina Designation: Indexable drill body (Vollbohrer) Facts Diameter: 17 mm Shank diameter: 25 mm Cutting length: 34 mm Shank length: 56 mm Overall length: 110 mm Weight: 0.291 kg Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec, YG‑1 Special features Indexable insert concept for quick insert changes Compact overall length for reduced overhang Balanced mass for stable rotation Suitable for production and workshop environments FAQ What insert size does the drill body accept? The drill body accepts SPMG 0602 indexable inserts as stated; compatible grades from Taegutec and YG‑1 are commonly used with this body. Is the shank suitable for standard toolholders? The 25 mm shank is designed for secure clamping in standard holders that accept a 25 mm diameter connection. What is the effective cutting length? The effective cutting length is 34 mm, making the body suitable for medium‑depth drilling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-rigidity tool body that combines a 17 mm diameter, 51 mm cutting length and direct compatibility with Korloy WCM-0302 inserts for consistent hole quality and predictable tool life — order the solid drill directly via Metav Werkzeuge or ask our consultants for application guidance. Solid drill U144TM (Teknik Makina) — 17 mm diameter, 25 mm shank Solid drill U144TM designed as an insert-equipped drill body for precision holemaking in CNC turning and milling applications, compatible with Korloy WCM-0302 indexable inserts. 17 mm diameter for standard holemaking 25 mm shank for secure clamping Compatible with Korloy WCM-0302 inserts 51 mm effective cutting length Consistent hole quality for production machining The U144TM tool body delivers repeatable holes through a combination of rigid geometry and a secure 25 mm shank that reduces vibration in high-speed machining. The 17 mm diameter and 51 mm cutting length provide a clear specification for process planning, enabling predictable cycle times and improved first-pass yield. Designed for use with standard indexable inserts, the tool body facilitates fast insert changes and consistent cutting edges, which helps to lower process variation and optimise part tolerances on CNC equipment. Fewer tool variants, faster setup Compatibility with Korloy WCM-0302 inserts reduces the need for multiple tool variants and simplifies inventory management. The insert-based concept enables quick reconditioning of the cutting edge without removing the drill body from the spindle, shortening downtime between operations. With a compact overall length and a 56 mm holder engagement, the design supports secure clamping while maintaining access in tighter turrets or tool posts, making it suited for job-shop environments and production lines alike. Durable design that supports predictable throughput Constructed as a purpose-built drill body, this component focuses on mechanical rigidity and reliable insert location to support stable chip formation and evacuation. At approximately 0.32 kg the assembly balances mass for stability while remaining easy to handle during tool changes. The combination of defined dimensions and insert standardisation helps to calculate cost per hole and justify tool selection rationally, which is particularly relevant for operations that prioritise efficiency and traceable quality outcomes. Contact Metav Werkzeuge today for technical advice or to reserve the Teknik Makina solid drill U144TM for the next production cycle — Metav's consultants in Emmerich will assist with compatibility and delivery details Technical data SKU: U144TM Manufacturer: Teknik Makina Diameter: 17 mm Overall length: 127 mm Cutting length: 51 mm Shank diameter: 25 mm Holder engagement length: 56 mm Weight: 0.32 kg Special features Compatible with Korloy WCM-0302 inserts Suitable for insert-equipped drilling applications Designed as a solid drill body for CNC operations FAQ Which insert type fits this drill body? The drill body accepts Korloy WCM-0302 inserts; the U144TM is specified for this insert geometry and seat. What are the key dimensions to check before mounting? Check the 17 mm cutting diameter, 25 mm shank diameter and the 127 mm overall length to ensure correct clamping and spindle clearance for the U144TM. Is this tool suitable for CNC turret or toolholder systems? Yes. The U144TM is designed as a compact insert-equipped drill body with a secure 25 mm shank for stable clamping in CNC turrets and toolholders. How long is the cutting portion of the tool? The effective cutting length is 51 mm, which supports through-hole and standard-depth drilling operations when paired with the correct insert. Which manufacturer produces this tool and where is it supplied from? This tool is manufactured by Teknik Cutting Tools and supplied via Metav Werkzeuge; see manufacturer details below. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com