Gibt es einen Hahn und Kolb Online Shop?

Take advantage of reliable thread milling compatibility and robust mounting for consistent cycle times; the combination of a 20 mm shank and 93 mm overall length ensures stable clamping and extended reach for typical CNC operations — order directly via Metav Werkzeuge or consult the team for application support. Thread milling cutter DC214TM — indexable inserts S14–S40, 20 mm shank (Teknik Makina) The Thread milling cutter DC214TM is a purpose-built tool for CNC thread milling with indexable inserts, offering stable mounting and versatile insert compatibility for production and repair shops alike Compatible with S14, S21, S30 and S40 inserts 20 mm shank for secure clamping 93 mm overall length for extended reach Reliable compatibility that reduces setup time The design focuses on straightforward integration into existing tooling systems. With compatibility for S14, S21, S30 and S40 indexable inserts, the cutter allows fast adaptation to different thread forms without replacing the entire tool body, which reduces inventory complexity. The construction supports repeatable positioning and predictable chip control, delivering measurable time savings during changeovers and set‑up — a practical advantage in batch production and maintenance work. Stable clamping and simple insert replacement for uptime A 20 mm shank provides a firm interface with common holders, improving runout stability and minimising vibration under load. Insert retention is secured with an M2.5x7 Torx screw, tightened with a T8 key, which enables quick, tool‑assisted insert changes and precise clamp force. The 93 mm overall length offers added reach for recessed or awkward thread locations while maintaining sufficient rigidity for consistent thread form, contributing directly to process reliability on the shop floor. Optimised for thread milling operations in CNC environments Engineered as a cutting tool for thread generation rather than conventional tapping, the cutter supports indexed insert technology to allow controlled multiple‑pass milling. This method often provides better chip evacuation and less axial thrust compared with solid taps, which can increase tool life in interrupted cuts. The product is classified under eCl@ss 21180805 and ETIM EC011860, indicating its placement within standardised tool taxonomies and easing product selection in industrial procurement systems. Why procurement specialists choose Teknik Makina through Metav Werkzeuge Sourcing this cutter via Metav Werkzeuge combines manufacturer performance with distributor reliability. Metav’s Emmerich hub acts as a quality filter for the European market, supplying precision tools with consistent stock availability and technical consultation. For purchasing managers and workshop supervisors, the benefit is straightforward: consolidated sourcing, dependable supply chains and industry knowledge that supports efficient integration of the tool into production processes. For tailored technical advice and reliable supply of the Teknik Makina Thread milling cutter DC214TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for precise recommendations and prompt dispatch. Technical data Article number: DC214TM Name: Thread milling cutter For indexable inserts: for S14, S21, S30 and S40 Indexable Inserts Manufacturer: Teknik Makina ETIM: EC011860 eCl@ss: 21180805 Numerical data Shank diameter: 20 mm Cutting diameter: 20 mm Overall length: 93 mm Materials & special features Torx screw: M2.5x7 Torx key size: T8 Application: thread milling operations FAQ Which insert sizes are compatible with this cutter? The DC214TM is compatible with S14, S21, S30 and S40 indexable inserts as specified, allowing selection of insert grades and geometries to suit material and thread form. What is the shank size and why does it matter? The cutter features a 20 mm shank; this dimension provides a stable contact area in the toolholder, improving runout and contributing to more accurate thread profiles during machining. How are inserts secured and replaced? Inserts are secured with an M2.5x7 Torx screw and require a T8 key for removal and fitting, enabling quick and repeatable insert changes for minimal downtime. Is the cutter suitable for deep or recessed threads? With a 93 mm overall length, the tool offers extended reach for recessed thread positions while maintaining sufficient rigidity for reliable machining results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise internal coolant delivery and proven insert compatibility to reduce cycle times and improve process reliability; order the K327-3TM directly via Metav Werkzeuge or consult their technical team for specification matching. K327-3TM Internal Thread Boring Bar — 20 mm shank, internal coolant, for 16 IR inserts (Teknik Makina) The K327-3TM is a compact internal threading tool designed for precision internal threads using IR indexable inserts, offering internal coolant for controlled chip evacuation in confined bores Internal coolant for efficient chip removal For 16 IR indexable inserts 20 mm shank diameter, 170 mm overall length Torx clamping screw M3.5x11, key T8 Faster, cleaner internal threading through built-in coolant The combination of an integrated internal coolant channel and a rigid construction delivers measurable process advantages: consistent lubrication and chip flushing reduce tool wear and prevent built-up edge, while stable cutting conditions improve dimensional precision. Built for indexable-insert threading, the bar ensures effective chip control in blind and through bores, helping to maintain surface quality and reduce secondary cleaning operations. Where higher throughput is required, the tool body’s coolant feed supports longer uninterrupted cycles and more predictable tool-life behaviour. Reliable clamping and repeatable set-up for workshop efficiency Clamping is secured by a Torx M3.5x11 screw and tightened with a T8 key, offering a fast, repeatable insert change procedure that supports short set-up times. The 20 mm shank diameter and a 170 mm overall length provide a balance of accessibility and rigidity for common internal threading tasks. Compatibility with 16 IR indexable inserts simplifies inventory and stocking decisions, since standard insert geometries can be used across multiple operations. The straightforward mechanical interface reduces set-up variability and contributes directly to improved first-pass yield. Easy integration into production and low-maintenance operation Designed for straightforward workshop integration, the tool accepts industry-standard IR inserts and requires only simple periodic checks: insert condition, clamping torque and coolant passage clearance. The compact design minimises interference in crowded fixtures while the internal coolant reduces the need for external flushing arrangements. For procurement and long-term planning, the tool is an economical option that supports predictive maintenance strategies and reduces operator handling time, aligning with quality-focused production routines. Contact Metav Werkzeuge for precise ordering and application advice on the K327-3TM internal thread boring bar; technical specialists in Emmerich can confirm suitability for specific jobs — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K327-3TM Designation: Internal threading / thread boring bar Manufacturer: Teknik Makina Suitable for inserts: 16 IR Internal coolant: Yes Facts Shank diameter: 20 mm Overall length: 170 mm Torx screw: M3.5x11 Torx key: T8 Special features For inside thread with IR indexable inserts Internal coolant channel Torx clamping system for quick insert changes Compact, rigid design for repeatable set-up FAQ What insert type does this tool accept? The K327-3TM accepts 16 IR indexable inserts designed for internal threading operations. Does the bar supply coolant to the cutting edge? Yes — the tool features an internal coolant channel that delivers lubrication directly to the cutting zone to aid chip evacuation. What are the key dimensions to check for machine compatibility? Check the 20 mm shank diameter and 170 mm overall length to ensure proper clearance and fit-up in existing toolholders. How is the insert secured and which fastening tools are required? The insert is clamped with a Torx M3.5x11 screw tightened with a T8 key for reliable, repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise indexable‑insert drilling with a Ø 21.5 mm cutting diameter and a 25 mm shank for straightforward toolholder integration, plus a 63 mm effective cutting length for extended reach; order directly via Metav Werkzeuge or ask the in‑house consultants for compatibility advice. Teknik Makina solid drill U821-1TM — Ø 21.5 mm, compatible with SPMG 0602 The U821-1TM solid drill is a compact indexable‑insert drilling solution designed for reliable repeatability in production environments where quick insert replacement and consistent hole quality are required. Solid drill for SPMG 0602 inserts Ø 21.5 mm drilling diameter 25 mm shank for standard holders 63 mm effective cutting length Consistent hole quality through engineered geometry The U821-1TM is built as a solid drill configured for indexable inserts, which supports consistent hole dimensions and repeatable performance across production runs. The tool’s Ø 21.5 mm diameter and defined 63 mm cutting length reduce the need for multiple setups by providing a predictable cutting envelope. Using indexable inserts means only the small carbide insert needs replacing when wear occurs, limiting downtime and lowering per‑hole operating costs while maintaining a stable cutting geometry. Fast integration with common insert systems and holders A measured 25 mm shank and a 56 mm shank length allow straightforward fitting into existing toolholders without special adaptors, easing retrofit and tool change processes. The drill accepts SPMG 0602 indexable inserts and is compatible with insert suppliers such as Taegutec and YG‑1, which simplifies procurement and ensures access to a broad insert portfolio. The combination of standardised interface and widely available inserts enables efficient inventory management and predictable procurement cycles. Designed for repeatability, handling and shop‑floor reliability With an overall length of 142 mm and a net weight of 0.377 kg, the tool offers a balance between rigidity and manoeuvrability for typical workshop handling. The indexable‑insert concept reduces the volume of expensive solid tooling held in stock and minimises waste by replacing inserts rather than entire drills. The tool’s construction prioritises repeatable clamping and straightforward maintenance, supporting continuous production where predictable tool life and simple replenishment are decisive advantages. For straightforward retrofit and secure supply, request the Teknik Makina U821-1TM from Metav Werkzeuge — Metav’s team can advise on insert selection and delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange procurement and technical guidance Technical data Article number: U821-1TM Manufacturer: Teknik Makina Compatible inserts: SPMG 0602 Facts Diameter: Ø 21.5 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.377 kg Special features Indexable‑insert design Compatible with Taegutec inserts Compatible with YG‑1 inserts FAQ Which insert type does this solid drill use? The U821-1TM accepts SPMG 0602 indexable inserts for economical replacement and consistent cutting geometry. Which manufacturers’ inserts are compatible? The tool is compatible with inserts from Taegutec and YG‑1, offering flexibility in sourcing replacements. What are the key dimensions to check for toolholder compatibility? Key dimensions are a 25 mm shank diameter and 56 mm shank length; overall length is 142 mm and cutting length is 63 mm. What is the exact drilling diameter of the tool? The drill provides a nominal drilling diameter of Ø 21.5 mm. What is the article number and who made the tool? The article number is U821-1TM and the tool is supplied by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid drill body with a generous 63 mm cutting length and a secure 25 mm shank to keep cycle times low and regrinding effort minimal; order directly via Metav Werkzeuge or consult the technical team for application matching. Vollbohrer (indexable drill body) by Teknik Makina — Ø 21.5 mm, 63 mm cutting length The Vollbohrer (indexable drill body) is designed for high-efficiency holemaking in industrial machining, accepting WCM-0402 indexable inserts for stable, repeatable performance in medium-deep drilling operations. *Suitable for WCM-0402 inserts *Ø 21.5 mm cutting diameter *63 mm cutting length *25 mm shank diameter Increased production throughput thanks to a stable drill body The rigid design of the drill body delivers consistent centring and chip evacuation, reducing the need for rework and lowering cycle times. With a Ø 21.5 mm cutting diameter and an effective 63 mm cutting length, the tool is optimised for through and medium-depth holes where repeatable hole quality matters. The robust shank, 25 mm in diameter, ensures positive clamping in standard toolholders, contributing to vibration suppression and longer insert life. Simple insert replacement and tooling flexibility for diverse tasks Compatibility with WCM‑0402 inserts from Korloy enables quick seat-and-clamp replacement, avoiding lengthy tool changes and reducing machine downtime. The body accepts standard indexable inserts, meaning inventory can be standardised across multiple tool families. The 56 mm shank length provides sufficient engagement for most holders while the 142 mm overall length balances reach with rigidity, making the system suitable for batch production and trade-shop environments that demand both flexibility and stability. Clear specification for predictable machining results Measured data such as overall length 142 mm, shank Ø 25 mm, and a tool weight of 0.281 kg provide a verifiable basis for process planning and fixture design. The modular approach—drill body plus replaceable inserts—supports a cost-efficient consumable strategy: cutting edges are renewed by replacing small inserts rather than discarding an entire solid tool. This approach reduces material waste and makes cost-per-hole calculation straightforward for production planning. Contact Metav Werkzeuge today for tailored tooling advice and to order the Teknik Makina Vollbohrer U153TM; reference the SKU U153TM when enquiring and benefit from expert guidance from Metav Werkzeuge's technical consultants Technical Data Article number: U153TM Manufacturer: Teknik Makina Product name: Vollbohrer Suitable for insert type: WCM- 0402 Compatible insert manufacturer: Korloy Core specifications Cutting diameter: 21.5 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.281 kg ECLASS: 21180201 Special features Indexable drill body for replaceable inserts Compatible with Korloy WCM-0402 inserts Balanced overall length for reach and rigidity FAQ What insert type fits this drill body? The drill body accepts WCM‑0402 indexable inserts; Korloy is listed as the compatible insert manufacturer for this configuration. Which diameter and lengths are specified for the tool? The tool has a cutting diameter of 21.5 mm, an overall length of 142 mm and a cutting length of 63 mm, as supplied under SKU U153TM. Is the shank suitable for standard holders? A 25 mm shank diameter with a 56 mm shank length provides secure clamping in common toolholders used in turning and milling centres. Can this tool be used for deep-hole drilling? The configuration is optimised for medium-depth holes up to the listed 63 mm cutting length; for deeper applications, verification of rigidity and coolant strategy is advised. How does the indexable system reduce running costs? By replacing only the WCM‑0402 inserts rather than the whole body, the cost per cutting edge is reduced and maintenance is simplified, improving overall cost-efficiency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-precision chamfering with a 21 mm cutting diameter and a 20 mm shank delivers consistent edge quality while the 200 mm overall length provides extended reach for recessed features; order the chamfer cutter directly via Metav Werkzeuge or ask our consultants if needed. S353TM 21 mm Chamfer Cutter by Teknik Makina — 20 mm shank, 200 mm length The S353TM 21 mm Chamfer Cutter is a shank cutter designed for reliable chamfering and bevel creation in milling setups, offering extended reach and secure clamping for repeatable production runs 21 mm cutting diameter 20 mm precision shank Compatible with Korloy inserts 200 mm overall length Achieve consistent chamfers with every cycle The robust geometry of this chamfering tool focuses on repeatability: a 21 mm cutting diameter combined with a single cutting edge ensures predictable material removal and uniform chamfer profiles across batches. The simplified cutting design reduces chatter and makes feed rates easier to control, which directly improves cycle stability. For process planners this means fewer rejects and more predictable down‑time planning, while shopfloor technicians benefit from straightforward machining parameters and rapid set‑up. Secure clamping and extended reach for complex parts A 20 mm shank gives the tool high clamping stability in standard tool holders and collet chucks, reducing runout and vibration during milling. With a 200 mm overall length, the tool allows access to deeper features without compromising stiffness for short overhangs. The combination of shank size and overall reach supports integration into automated toolholders and manual setups alike, supporting versatile use in both single‑piece production and serial manufacturing environments. Fast insert changes and low maintenance overhead Insert retention uses a Torx system (key T15) and an M4x10 screw for positive locking, enabling quick replacement of indexable inserts from established suppliers such as Korloy. The simple fastening arrangement shortens maintenance intervals and reduces non‑productive time during tool exchanges. Clear mechanical fixation and a lightweight design (approx. 0.378 kg) also make handling safer and faster at the tool trolley or change station. Reliable integration into production workflows Labeled S353TM, this shank cutter is categorised for use as a dedicated chamfering tool and is ready for direct procurement and logistics handling. The compact weight and standardised dimensions enable easy inventory management and predictable tooling behaviour when paired with common holders. For operations looking to streamline supplier bases, the combination of established compatibility and repeatable performance supports consolidation of tooling lists and smoother procurement cycles. Order the Teknik Makina S353TM chamfer cutter via Metav Werkzeuge for dependable chamfering performance; contact Metav Werkzeuge for technical advice and fast delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S353TM Product type: Chamfer cutter Label: 21mm Chamfer Cutter L200mm Manufacturer: Teknik Makina Key dimensions Diameter: 21 mm Overall length: 200 mm Shank diameter: 20 mm Cutting length (shaft): 60 mm Cutting edges: 1 Weight: 0.378 kg Features / Compatibility Compatible inserts: Korloy Torx key: T15 Torx screw: M4x10 eClass: 21180806 Category: Shank cutter FAQ What applications is this chamfer cutter suited for? The S353TM chamfer cutter by Teknik Makina is intended for chamfering and bevel formation in milling operations where a 21 mm cutting diameter and extended reach are required. Which inserts fit this tool? This cutter is compatible with Korloy indexable inserts; insert geometry should match the cutter seat and clamping screw type (M4x10). How is the insert secured? Insert retention uses an M4x10 Torx screw tightened with a T15 key, allowing rapid and secure replacement. Does the tool require specific holders for safe operation? A standard holder or collet capable of accepting a 20 mm shank is suitable; the 20 mm shank ensures secure clamping and reduced runout. What is the official designation for ordering? Order under SKU S353TM, referred to as the 21 mm chamfer cutter by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of consistent 45° chamfering, a robust 20 mm shank and direct compatibility with Korloy TWX 16R indexable inserts for efficient bevel production; order directly via Metav Werkzeuge or consult our specialists for application advice. Chamfer mill S352TM — indexable‑insert cutter with 45° chamfer, Ø 21 mm (Teknik Makina) The Chamfer mill S352TM is a compact indexable‑insert cutter for producing precise 45° bevels, optimised for TWX 16R inserts and routine workshop milling tasks. 45° chamfer angle Shaft Ø 20 mm Compatible with TWX 16R inserts Overall length 110 mm Accurate chamfering for reduced rework The tool delivers a consistent 45° chamfer, achieved by the cutter geometry and the single cutting edge design. With an external diameter of 21 mm and a cutting height of 50 mm, the cutter produces repeatable bevels that reduce secondary operations and scrap. This precision is suitable for batch production as well as single‑part finishing, where predictable edge quality shortens inspection cycles and supports process stability. Quick insert changes and straightforward clamping Insert retention is secured by a Torx screw M4x11, tightened with a T8 key, enabling quick replacement of worn inserts and minimising machine downtime. The solid 20 mm shank fits standard collets and contributes to stable toolholding, while the modest weight of 0.26 kg simplifies handling during tool changes. These features together support an efficient workflow and lower total processing time per chamfered edge. Flexible usage and supply advantages for workshops Designed for use with TWX 16R indexable inserts (Korloy), the cutter offers flexibility in sourcing and inventory management. Using a standard insert size allows workshops to stock fewer variants while maintaining process capability. The compact overall length of 110 mm makes the cutter suitable for many CNC milling set‑ups and manual milling operations, delivering a balance of accessibility and machining performance for daily workshop demands. For ordering, technical consultation or supply options for the Teknik Makina Chamfer mill S352TM, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for the intended application Technical data Article number: S352TM Manufacturer: Teknik Makina Diameter: 21 mm Cutting height: 50 mm Shank diameter: 20 mm Overall length: 110 mm Cutting edges: 1 Chamfer angle: 45° Weight: 0.26 kg For indexable inserts TWX 16R Compatible insert manufacturer: Korloy Torx screw: M4x11 Torx key: T8 FAQ Which insert type is required for this chamfer cutter? The chamfer cutter accepts TWX 16R indexable inserts; the design is compatible with inserts from Korloy. What chamfer angle does the cutter produce? The tool is configured for a 45° chamfer, providing standard bevels for general finishing and edge preparation. How are the inserts secured in the cutter? Inserts are fixed with a Torx screw M4x11, which is tightened or released using a T8 key for rapid insert changes. What shank size is required for mounting? The cutter has a 20 mm shank diameter and is intended for collets or holders that accept a 20 mm shank. Can the cutter be used in compact machine setups? Yes, the overall length of 110 mm and the compact head dimensions make the tool suitable for many CNC and manual milling configurations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise chamfering, stable clamping and quick insert replacement for a consistent production flow; the tool combines a 21 mm cutting diameter, a 12 mm shank and compatibility with Korloy indexable inserts. Order the chamfer cutter directly via Metav Werkzeuge or ask our consultants if needed. Chamfer cutter S351TM — 21 mm diameter, 12 mm shank (Teknik Makina) The Chamfer cutter S351TM is a shaft-mounted cutting tool designed for precision chamfering in milling operations across industrial and workshop environments. Precision 21 mm cutting diameter 12 mm shank for stable clamping Compatible with Korloy indexable inserts Single cutting edge for clean chamfers Stable clamping for repeatable chamfers The robust 12 mm shank and a compact 90 mm overall length combine to deliver reduced runout and improved stability during machining. With a modest mass of 0.258 kg, the tool offers predictable dynamic behaviour that helps to limit vibration and improve surface finish. The single cutting edge is optimised for producing a consistent chamfer profile with each pass, which reduces secondary operations and supports reliable downstream assembly processes. Fast insert changes and low downtime Changeovers are simplified by the indexable insert system that is compatible with Korloy inserts and secured by an M4x10 Torx screw. The Torx drive specification (T15) enables controlled torque application and secure seating of the insert, which reduces the risk of loosening under load. The cutter’s modular approach means worn inserts can be replaced quickly, lowering tooling costs and keeping machine uptime high. Designed for workshop productivity and integration As a shaft-mounted end mill category tool, the cutter integrates easily into standard milling setups where a 12 mm toolholder is available. The 40 mm cutting length provides sufficient engagement for typical chamfer depths while keeping overhang minimal. The compact design supports efficient fixturing and faster cycle times, helping to streamline batch production and minimise set-up complexity for small-to-medium runs. For Korloy-compatible chamfering solutions provided by Teknik Makina, contact Metav Werkzeuge for product availability and tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S351TM Label: 21mm Fasenfräser L90mm eClass: 21180806 Manufacturer: Teknik Makina Dimensions & weights Diameter: 21 mm Overall length: 90 mm Shank diameter: 12 mm Cutting length: 40 mm Weight: 0.258 kg Number of cutting edges: 1 Features & compatibility Compatible with Korloy indexable inserts Torx key: T15 Torx screw: M4x10 Product type: Shaft end mill (chamfer cutter) SKU: S351TM FAQ Which inserts fit this chamfer cutter? The chamfer cutter S351TM is compatible with Korloy indexable inserts; confirm the insert geometry matches the required chamfer angle before assembly. How is the insert secured? The insert on the S351TM is secured with an M4x10 Torx screw tightened with a T15 Torx key to ensure stable seating under cutting loads. What are the key dimensions to check for toolholder compatibility? Check the 12 mm shank diameter and 90 mm overall length; these determine collet and clamping suitability for the chamfer cutter. How many cutting edges does the tool have? This chamfering tool has a single cutting edge designed for clean, controlled chamfers. What is the product identifier for ordering or documentation? Use SKU S351TM when ordering or requesting technical specifications for the chamfer cutter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, 21 mm diameter cutter with a 20 mm shank and a 40 mm cutting length for reliable, repeatable insert milling; order directly via Metav Werkzeuge or contact our consultants for tailored application advice. Shank milling cutter S479-4TM — 21 mm diameter, for BLMP 0603 indexable inserts (Teknik Makina) The Shank milling cutter S479-4TM is a robust tool intended for precision milling with BLMP 0603 indexable inserts, offering a compact profile that suits tight set-ups and versatile face or slot applications. 21 mm diameter for compact machining 20 mm shank for secure clamping Compatible with BLMP 0603 Taegutec inserts Secure clamping for repeatable accuracy The cutter’s 20 mm shank is designed for firm retention in standard holders and collets, so clamping forces are distributed evenly and runout is minimised. Compatibility with BLMP 0603 indexable inserts ensures a standardised insert geometry, which facilitates fast index changes and consistent cutting geometry. The use of a T8 Torx key and M3x6.2 fastening screws provides a secure fastening method that is widely adopted in industry and reduces the risk of loosening under intermittent loads. This construction gives a dependable basis for repeatable part quality in series production. Compact tool body for efficient machining and handling With a nominal diameter of 21 mm, 40 mm cutting length and 150 mm total length, the tool balances cutting capacity and reach for a variety of milling tasks while keeping overhang limited. The three cutting edges allow for a steady material removal rate with predictable chip flow, and the tool’s modest mass (approx. 0.348 kg) reduces centrifugal effects at higher spindle speeds and improves operator handling during tool changes. The practical combination of dimensions and the indexable-insert system supports cost-efficient maintenance: worn inserts are replaced rather than the entire tool, lowering lifetime tooling costs and shortening downtime between operations. Seamless integration into production workflows Designed for straightforward implementation in established machining cells, this cutter accepts inserts from recognised manufacturers such as Taegutec, enabling flexible sourcing and supply security. The compact design supports close-quarter setups and fixtures commonly found in jobbing shops and subcontracting environments. Supplied under SKU S479-4TM, the tool is compatible with standard insert retention hardware and utilises common workshop tools for maintenance, reducing training effort. For further specification sheets or application guidance, Metav Werkzeuge provides technical advice and assured supply from Emmerich, ensuring straightforward procurement and reliable delivery. For application-specific recommendations or to secure stock of the Teknik Makina S479-4TM shank milling cutter, contact Metav Werkzeuge for expert guidance and swift supply from Emmerich. Technical data SKU: S479-4TM Manufacturer: Teknik Makina Product type: Shank milling cutter Facts Diameter: 21 mm Total length: 150 mm Weight: 0.348 kg Shank diameter: 20 mm Cutting length: 40 mm Cutting edges: 3 Special features For BLMP 0603 indexable inserts Compatible with Taegutec inserts Torx key: T8 Torx screw: M3x6.2 FAQ Which inserts fit this cutter? The cutter is designed for BLMP 0603 indexable inserts; inserts from Taegutec that match BLMP 0603 geometry are compatible. What shank size is required for clamping? A 20 mm holder or collet is required to secure the 20 mm shank for optimal concentricity and stability. What are the tool’s overall and cutting lengths? The tool has a 150 mm total length and a 40 mm cutting length, providing modest reach with limited overhang. How is the insert fastened to the tool? Inserts are secured with an M3x6.2 screw tightened using a T8 Torx key to ensure a reliable connection. Is this cutter suitable for close-tolerance production runs? Yes, the combination of a compact body, defined shank diameter and standardised BLMP 0603 inserts allows the cutter to be used in repeatable, close-tolerance milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of robust compatibility with 3PKT 1004 indexable inserts, internal coolant for stable chip evacuation, and a compact 20 mm shank for secure clamping; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Indexable Milling Cutter S485-1TM for 3PKT 1004 – 21 mm diameter, internal coolant (Teknik Makina) A versatile Indexable Milling Cutter S485-1TM engineered to hold 3PKT 1004 inserts for heavy-duty finishing and efficient material removal across a range of milling operations. 21 mm cutting diameter Internal coolant supply 20 mm shank diameter for solid clamping Compatible with Taegutec 3PKT 1004 inserts Optimised cutting stability and process reliability The holder is designed to deliver consistent cutting performance by combining a 21 mm diameter body with a balanced geometry and coolant-fed cutting zone. The internal coolant channel reduces thermal load at the edge and improves chip evacuation, which stabilises tool life and lowers the risk of built-up edge. With two cutting edges the cutter offers predictable engagement and reduced vibration compared with more complex multi-flute systems, making it suitable where reproducible finishes and cycle-time stability are required. These technical choices yield measurable process reliability and make the tool an efficient element of a production cell. Practical handling and secure set-up for fast changeovers Set-up efficiency is supported by a 20 mm shank that fits standard collets and holders, combined with a robust clamping interface that contributes to high run-out stability during spindle rotation. The holder uses a Torx retention screw (T8) with specification M2.5x7, enabling quick insert changes while maintaining repeatable seating. The tool’s dimensions — 200 mm overall length with a 30 mm cutting length — provide a sensible balance between reach and rigidity for common milling tasks. These features reduce fixture adjustments and accelerate tool replacement, lowering downtime and simplifying workshop logistics. Proven compatibility and application-focused design Specifically built for 3PKT 1004 indexable inserts and compatible with Taegutec grades, the cutter allows users to select insert geometries and coatings that match the workpiece and cutting strategy. The modular insert system reduces long-term tooling costs because only the insert needs replacing when worn. The S485-1TM’s combination of coolant capability and a compact shank makes it suitable for finishing and light roughing across many materials where indexed inserts are preferred for economy and flexibility. For production environments seeking reproducible results and cost-effective wear management, the tool offers a pragmatic solution. For tailored guidance on integrating the Teknik Cutting Tools S485-1TM into a specific machining process or to secure immediate supply from Metav Werkzeuge in Emmerich, contact us at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and procurement. Technical data SKU: S485-1TM UID: S485-1TM Manufacturer: Teknik Makina Facts Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 200 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 1.259 kg Torx key: T8 Torx screw: M2.5x7 Internal coolant: yes Special features For indexable inserts type 3PKT 1004 Compatible with Taegutec inserts Designed for insert change with Torx retention screw Balanced geometry for reduced vibration FAQ What inserts fit this milling cutter? The Indexable Milling Cutter S485-1TM accepts 3PKT 1004 indexable inserts and is specified for use with Taegutec-compatible grades. Does the tool support through-coolant supply? Yes, the cutter features internal coolant that delivers lubricant to the cutting zone for improved chip control and tool life. What are the shank and overall dimensions? The tool has a 20 mm shank and a 200 mm overall length, with a 21 mm cutting diameter and 30 mm cutting length. How are inserts secured in the tool? Inserts are retained with a Torx screw; the drive size is T8 and the screw specification is M2.5x7, enabling secure and repeatable clamping. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert compatibility, internal coolant and a compact 20 mm shank for reliable milling performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S674-1TM – 21 mm for LNMU 0303 indexable inserts, internal coolant (Teknik Makina) A Shank milling cutter S674-1TM crafted for use with LNMU 0303 indexable inserts, offering internal coolant and a compact profile for versatile milling and straightforward insert changes 21 mm cutting diameter Internal coolant for reliable chip evacuation Compatible with LNMU 0303 indexable inserts 20 mm shank, 3 cutting edges Productivity through proven insert compatibility The milling system is tuned for productive results by using the widely adopted LNMU 0303 insert family; this ensures consistent cutting geometry and repeatable results across serial production. With a 21 mm diameter and three cutting edges, the design balances material removal rate and surface finish, reducing cycle times while maintaining dimensional stability. The modular insert concept simplifies inventory and reconditioning: worn edges are replaced rather than the whole tool, which lowers lifecycle cost and keeps machine uptime high. Stable machining with internal coolant and controlled chip flow Integrated internal coolant directs lubricant and coolant precisely to the cutting zone, improving flank wear behaviour and aiding chip evacuation in through-tool flow operations. This targeted cooling reduces thermal deformation and extends insert life, especially during medium- to high-feed roughing passes. The result is fewer tool changes and more predictable component tolerances, an important advantage for job shops and production lines aiming for consistent first-pass yield. Compact design for easy handling and reliable set-up A 20 mm shank and a 150 mm overall length deliver a compact footprint that suits smaller spindles and tight set-ups while retaining sufficient reach for many applications. The tool features a T8 Torx interface and M2.5x7 screws for secure insert fastening, enabling quick, repeatable insert changes with standard workshop keys. Supplied weight and dimensions support straightforward balancing and fixture planning, helping to integrate the cutter into existing toolholders without extensive adaptation. Contact Metav Werkzeuge for tailored technical advice on integrating the S674-1TM into existing workflows and to confirm insert compatibility for specific materials and machining conditions. Technical Data Article number: S674-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Facts Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length: 50 mm Number of cutting edges: 3 Weight: 0.389 kg Internal coolant: yes Torx key: T8 Torx screw: M2.5x7 Special features For LNMU 0303 indexable inserts Compatible with Tungaloy insert system Internal coolant feed Compact 20 mm shank design FAQ What insert type is required for this cutter? The shank milling cutter S674-1TM uses LNMU 0303 indexable inserts and is compatible with Tungaloy insert systems for straightforward sourcing and replacement. Is through-tool coolant integrated in the design? Yes, the S674-1TM from Teknik Makina features internal coolant, providing targeted cooling to the cutting zone to improve tool life and chip control. Which shank and cutting diameters are available for this model? This model has a 21 mm cutting diameter and a 20 mm shank, with a 150 mm overall length and 50 mm cutting length suitable for compact setups. How many cutting edges does the cutter have and what is the fastening method? The cutter has three cutting edges and uses M2.5x7 Torx screws tightened with a T8 Torx key for secure insert clamping. Is the S674-1TM suitable for production environments with frequent tool changes? Yes, the insert-based concept of the S674-1TM keeps replacement and maintenance quick, minimising downtime and supporting high machine utilisation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact design that combines a Ø21 mm cutting diameter, three cutting edges and a robust 20 mm shank for steady machining and predictable chip control; order the cutter directly via Metav Werkzeuge or ask our consultants for application advice. Insert milling cutter S674TM by Teknik Makina — Ø21 mm, 3 cutting edges The insert milling cutter S674TM is a precision cutter body engineered for LNMU 0303 indexable inserts, intended for stable face and peripheral milling where fast insert replacement and repeatable tool set-up are required Designed for LNMU 0303 indexable inserts Cutting diameter Ø21 mm Three cutting edges for stable removal 20 mm shank with Torx screw M2.5x7 Stable cutting performance for predictable results The S674TM body delivers consistent cutting performance through its three-flute arrangement and carefully proportioned geometry. The combination of a Ø21 mm cutting diameter and 3 cutting edges contributes to even load distribution across the tool, reducing vibration and promoting a regular surface finish. In practice, this means fewer rework cycles and more predictable cycle times on repetitive milling operations. The indexable system decouples cutting-edge wear from the holder, allowing quick replacement of worn inserts and minimising machine downtime. Designed for straightforward compatibility and quick servicing Compatibility is central to the design: the cutter body accepts LNMU 0303 indexable inserts and is fitted using a Torx M2.5x7 fixing with a T8 key, enabling fast, repeatable clamping. The 20 mm shank ensures secure clamping in standard toolholders and provides rigid support during moderate axial and radial engagement. Clear mechanical interface standards reduce set-up time on the shop floor and simplify inventory management for insert and screw spares. The modular approach supports predictable maintenance intervals and a rapid return to production after insert changes. Practical advantages for workshop efficiency As a purpose-built cutter body, the S674TM supports operational efficiency by separating the cutting edge from the holder: worn inserts are exchanged instead of replacing complete cutters, which lowers tooling costs over time and accelerates recovery from edge wear. The compact Ø21 mm diameter and medium overall length make the tool well suited to confined work envelopes and operations where accessibility is a concern. For procurement and planning, the visible mechanical specification—shank Ø 20 mm, insert type LNMU 0303 and Torx fixing—facilitates exact matching with existing toolholders and spare-part lists, helping to reduce unnecessary stock and avoid compatibility issues. Contact Metav Werkzeuge for availability and technical guidance on the Teknik Makina S674TM insert milling cutter; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored application support Technical data Article number: S674TM Manufacturer: Teknik Makina Compatible inserts: LNMU 0303 Compatible insert manufacturer: TNGLY-OKE Torx screw: M2.5x7 Torx key size: T8 Facts Cutting diameter: 21 mm Overall length: 150 mm Shank diameter: 20 mm Number of cutting edges: 3 SKU: S674TM eClass: 21180806 ETIM: EC011860 Special features Insert milling cutter body for LNMU 0303 indexable inserts Torx M2.5x7 fixing for secure insert clamping 20 mm shank for standard toolholders Manufacturer: Teknik Makina Designed for quick insert replacement and reduced downtime FAQ What insert type does this cutter accept? The cutter accepts LNMU 0303 indexable inserts; the S674TM by Teknik Makina is built specifically for that insert format and for quick insert changes. Which shank diameter is supplied with the tool body? The tool body features a 20 mm shank diameter, allowing secure mounting in compatible holders and providing the rigidity expected for the S674TM milling body. How are the inserts secured to the cutter? Inserts are secured with a Torx M2.5x7 screw; a T8 key is used for tightening and loosening to ensure repeatable clamping torque. Is this cutter suitable for compact workspaces? Yes; with a Ø21 mm cutting diameter and an overall length of 150 mm, the S674TM is suited to operations that require a compact tool profile and good accessibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑precision milling solution that combines a 21 mm cutting diameter, internal coolant and proven insert compatibility for reduced setup time and consistent surface finish; order directly via Metav Werkzeuge or consult our specialists for technical advice. Shaft milling cutter S594-2TM — 21 mm diameter with internal coolant (Teknik Makina) A robust Shaft milling cutter S594-2TM designed for high‑precision milling tasks using R390 11T3 indexable inserts, suitable for production environments and workshop milling operations. 21 mm cutting diameter, compact design Internal coolant for improved chip evacuation Compatible with R390 11T3 inserts (Sandvik) 20 mm shank, 150 mm overall length Improved process stability with compact diameter and proven insert system The compact 21 mm cutting diameter delivers a balance between rigidity and accessibility, making the tool effective in confined setups and multi‑axis stations. Compatibility with R390 11T3 indexable inserts ensures a wide choice of cutting grades and geometries, which reduces tool change frequency and keeps production moving. The three‑edge configuration provides stable cutting progression; wear is localised to the insert so downtimes are minimised and repeatability across batches is enhanced. Enhanced cooling and chip control for longer tool life Equipped with internal coolant, the cutter channels cutting fluid directly to the cutting zone to improve lubrication and temperature control. This targeted cooling reduces thermal load on the insert and holder, promoting more consistent tool life and better surface integrity. For manufacturers looking to raise throughput without compromising finish, the internal supply supports higher metal removal rates and aids reliable chip evacuation from narrow pockets. Practical mounting and service features for efficient handling The tool is supplied with a 20 mm shank and a total length of 150 mm, with a cutting length of 50 mm, enabling secure clamping in standard toolholders and giving sufficient reach for many slotting and face‑milling tasks. The cutter uses a Torx T8 key and M2.5×5.5 screws for insert clamping, which simplifies replacement and repeatable seating. At 0.366 kg it combines manageable handling with the mass needed to dampen chatter in bench and production milling operations. Workflow advantages through interchangeable inserts and supplier compatibility Designed as an insert milling tool, this cutter reduces per‑part machining costs by allowing worn cutting edges to be replaced without switching the whole body. Compatibility with Sandvik inserts and standardised fixing hardware means inserts are widely available, simplifying procurement and stocking. Teknik Makina’s manufacturing tolerances ensure concentricity and balance are maintained, which improves cycle consistency and reduces inspection effort on repetitive batches. Contact Metav Werkzeuge today to discuss Teknik Makina’s S594-2TM with internal coolant for optimised milling workflows; Metav Werkzeuge’s consultants in Emmerich can advise on insert selection and delivery options suited to the intended application. Technical data SKU: S594-2TM Product: Shaft milling cutter for R390 11T3 indexable inserts Manufacturer: Teknik Makina Dimensions & weights Cutting diameter: 21 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 50 mm Weight: 0.366 kg Number of cutting edges: 3 Features & compatibility Internal coolant: yes Compatible inserts: R390 11T3 Compatible insert manufacturer: Sandvik Torx key: T8 Torx screw: M2,5x5,5 Product type: Shaft milling cutter FAQ What inserts fit this cutter? The cutter accepts R390 11T3 indexable inserts; insert grades and chipformers from Sandvik are compatible with the S594-2TM. Is coolant supply integrated? Yes — the tool features internal coolant that supplies fluid directly to the cutting edge to support cooling and chip evacuation. Which shank and holder size is required? A 20 mm shank is provided; the S594-2TM is intended for standard holders that accept a 20 mm tool shank and secure clamping. How long is the cutting portion of the tool? The cutter has a cutting length of 50 mm within a 150 mm overall length, offering reach for both face and light slot milling operations. How many cutting edges are used and how are they changed? Three cutting edges are used; inserts are clamped with an M2.5×5.5 screw operated with a Torx T8 key for straightforward replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid 20 mm shank, internal coolant and compatibility with XNKT 0604 Korloy inserts for reliable, repeatable milling. Order the tool directly via Metav Werkzeuge or consult our specialists for machining advice. Indexable-insert milling cutter S836-1TM – 21 mm, internal coolant (Teknik Makina) Indexable-insert milling cutter S836-1TM for XNKT 0604 indexable inserts, built to combine rigidity and coolant-through performance for demanding workshop milling tasks 21 mm cutting diameter with 20 mm shank Internal coolant for improved chip evacuation Compatible with XNKT 0604 Korloy inserts Robust 150 mm overall length, 40 mm cutting depth Stable geometry for consistent metal removal The S836-1TM tool is engineered around a 21 mm diameter body and a 20 mm shank to deliver the rigidity required for accurate pocketing and face milling. With a 150 mm overall length and a 40 mm cutting length, the design balances reach and stability to reduce chatter and maintain tolerances. The use of two cutting edges minimises cutting forces and supports steady material removal, which leads to improved surface finish and consistent dimensional results in repeated production runs. Coolant-through design and secure insert clamping A central benefit of this shank-mounted cutter is the internal coolant channel that delivers fluid directly to the cutting zone, supporting chip control and thermal management during prolonged cycles. The cutter accepts XNKT 0604 indexable inserts and is specified to work with Korloy inserts, giving rapid regrinding or indexing options without retooling the holder. Insert fixation is achieved with an M3x7 Torx screw, tightened with a T8 key, allowing secure clamping and quick servicing to reduce machine downtime. Practical advantages for workshop and production environments By combining a standardised insert type with coolant-through capability, this tool supports flexible tooling strategies and reduces inventory complexity. The adaptable holder lets job shops and industrial workshops switch grades of inserts for different materials while retaining the same mounting system. The overall package aims to shorten set-up times and improve process reliability, making the cutter a pragmatic choice for production-focused teams seeking stable milling performance. Contact Metav Werkzeuge for application-specific guidance or to request the Teknik Cutting Tools S836-1TM milling cutter with internal coolant and XNKT 0604 compatibility. Technical data SKU: S836-1TM Product type: Milling cutter (indexable insert) Brand: Teknik Makina ECLASS: 21180806 Facts Diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length: 40 mm Weight: 0.372 kg Cutting edges: 2 Torx key: T8 Torx screw: M3x7 Special features Internal coolant: yes Compatible inserts: XNKT 0604 indexable inserts Suitable insert manufacturer: Korloy Label: 21mm Schaftfräser XNKT 0604 L150mm mit Innenkühlung SKU / UID: S836-1TM FAQ Which insert type is required for this cutter? The S836-1TM accepts XNKT 0604 indexable inserts; Korloy-produced XNKT 0604 grades are compatible with this holder. Does the tool provide coolant-through capability? Yes, the cutter features internal coolant to support chip evacuation and thermal control at the cutting edge. What are the shank and overall dimensions? The tool has a 20 mm shank, 21 mm cutting diameter, 150 mm overall length and 40 mm cutting length, supplied as SKU S836-1TM. For which machining tasks is this cutter suited? The cutter is intended for indexable-insert milling operations such as face milling and slotting where a compact 21 mm diameter tool with coolant-through performance is needed. How is an insert secured and replaced? Inserts are clamped with an M3x7 Torx screw tightened using a T8 key; the indexable design permits rapid replacement of the insert without removing the holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure precise, repeatable parting and grooving with a clamp-style holder engineered for MGM 200 indexable inserts; the compact 21 mm profile and S16Q shank deliver stability and accessibility in confined setups. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Stechklemmhalter – Parting clamp holder for MGM 200, 21 mm, L180 mm (Teknik Makina) The Stechklemmhalter is a clamp-style parting holder designed for left-hand grooving and parting with MGM 200 indexable inserts, combining a compact 21 mm diameter with a standard S16Q shank for straightforward integration into 16 mm toolposts. Clamp-style holder for secure insert retention 21 mm outer diameter for compact setups S16Q shank for standard 16 mm toolposts Left-hand cutting for controlled parting operations Improve cycle consistency with secure clamping and insert compatibility The holder focuses on clamping integrity and predictable cutting performance. Compatible with MGM 200 indexable inserts and widely matched to Korloy grades, the clamping arrangement ensures stable seating of the insert and reduces vibration during parting cuts. The design accommodates a 2 mm cutting-edge width, which helps maintain a clean shear plane and reduces burr formation; the result is a shorter rework time and higher first-pass yield. For production environments aiming to raise throughput, this combination of precise seating and insert compatibility supports reliable cycle times and lowers scrap rates. Compact geometry and toolpost fit for improved access and rigidity A slim 21 mm outer profile and the S16Q shank make the toolholder suitable for operations where access is limited without sacrificing stiffness. The 180 mm overall length provides reach while the modest mass contributes to reduced spindle load; the assembly suits small to medium turning centres and toolposts accepting 16 mm shanks. The left-hand cutting orientation allows controlled parting from the operator’s preferred setup, and the compatibility with Korloy manufacturers’ MGM 200 inserts widens the choice of cutting grades for different workpiece materials. This geometry supports secure mounting and minimal deflection, particularly important when working with demanding alloys. Practical fastening and geometry for quick set-up and repeatable results Assembly and adjustment rely on proven hardware: a M5x12 clamping screw and a 4 mm Allen key for secure tightening, plus a clamping head width of 12.5 mm that centres the insert reliably. The toolholder provides a cutting height of 35 mm and a maximum grooving depth of 5 mm, making it suitable for many standard parting and groove profiles. These measurable parameters simplify process planning and make tool selection more predictable. For shops seeking predictable handling and straightforward maintenance, the combination of common fastening sizes and defined cutting limits supports fast changeovers and consistent set-up across shifts. Contact Metav Werkzeuge for tailored application advice on Teknik Makina toolholders and immediate supply from our Emmerich warehouse Technical data SKU: K897TM Label: 21mm Stechklemmhalter MGM 200 L180mm Product type: Stechklemmhalter For inserts: MGM 200 Compatible insert manufacturer: Korloy Manufacturer: Teknik Makina Facts Diameter: 21 mm Shank diameter: 16 mm Overall length: 180 mm Weight: 0.288 kg Cutting height: 35 mm Clamping head width: 12.5 mm Max grooving depth: 5 mm Cutting-edge width: 2 mm Clamping screw: M5x12 Allen key: 4 mm Cutting direction: left ECLASS: 21181005 Special features Toolholder designation: S16Q Clamp-style parting holder Compatible with MGM 200 indexable inserts Compatible with Korloy insert grades Left-hand cutting orientation Designed for parting and grooving operations M5x12 clamping screw and 4 mm Allen key specified FAQ What insert type is required for this holder? The holder is built for MGM 200 indexable inserts; Korloy-compatible MGM 200 grades are suitable for most parting and grooving tasks with this toolholder. Which shank size fits standard toolposts? The toolholder uses an S16Q designation with a 16 mm shank diameter, matching toolposts and holders designed for 16 mm tooling. What is the maximum grooving depth achievable? The holder supports a maximum grooving (stepping) depth of 5 mm, suitable for common parting profiles and narrow grooves. Are fastening tools and screws specified? Yes, the design specifies a M5x12 clamping screw and a 4 mm Allen key for secure insert clamping and straightforward tightening. Can the holder be used for right-hand operations? This version is configured for left-hand cutting; for right-hand operations, choose a corresponding holder designed for right-hand cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure M8 threaded fastening designed specifically for precision measurement tools; the compact 21 mm overall length keeps clamping neat in tight assemblies while the 4 mm Allen key drive ensures straightforward adjustment. Order the locking screw directly via Metav Werkzeuge or contact the consultants for compatibility advice. Locking Screw TC300TM – M8 thread, 21 mm overall length (Teknik Makina) A locking screw for precision calipers that provides secure fixation with an M8 thread and is operated with a 4 mm Allen key, suitable for workshop and inspection use. M8 thread for secure fastening 21 mm overall length for compact fit Operated with 4 mm Allen key Intended for precision calipers Secure clamping that prevents measurement drift A compact fastener with an M8 thread offers reliable axial clamping for sliding measurement tools. By preventing unwanted movement, this type of locking screw reduces the risk of measurement error and rework, improving throughput in repetitive inspection tasks. The robust thread form ensures repeatable clamping torque, which translates into stable readings on precision calipers and other sliding gauges. Easy adjustment and maintenance with standard tooling The drive accepts a 4 mm Allen key, which simplifies assembly and on-site adjustments without special tools. The short 21 mm overall length makes the component ideal where space is limited, such as inside caliper heads or small fixtures. Maintenance cycles are faster because standard hex keys are widely available in workshops, lowering downtime and keeping measuring equipment in service with minimal effort. Workshop supply reliability and traceable stock Delivered under SKU TC300TM, this lock screw is compact and light at approximately 0.1 kg, which eases storage and handling in busy shops. Sourcing through Metav provides supply-chain transparency and centralised procurement for measurement equipment; the company’s broad range means fewer suppliers to manage and a dependable stock buffer from the Emmerich location. The component is a practical choice for instrument makers and maintenance teams seeking consistent clamping performance. For procurement or technical clarification regarding Teknik Makina locking screws (TC300TM), contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com to verify fitment and availability Technical data Article number: TC300TM Manufacturer: Teknik Makina Eclass: 21189290 Facts Thread: M8 Overall length: 21 mm Weight: 0.1 kg Special features Suitable for precision calipers Drive type: 4 mm Allen key Intended function: locking screw for sliding gauges FAQ What thread size does the locking screw have? The locking screw is supplied with an M8 thread, providing a standard metric fastening for caliper assemblies and similar fixtures. Which tool is required to operate the screw? Operation requires a 4 mm Allen key; the TC300TM is designed for quick adjustment with this common hex key size. Is the fastener suitable for precision calipers? Yes, the component is intended as a locking screw for precision calipers and similar sliding measurement tools where a compact clamp is required. How is the item identified for reordering? The part is available under SKU TC300TM; reorders using this SKU ensure the correct locking screw from Teknik Makina is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure fastening is achieved through the combination of a standard M8 thread and a compact 21 mm profile, together with simple adjustment using a 3 mm Allen key — order directly via Metav Werkzeuge or consult our technical advisors for compatibility checks. Locking screw TH821TM — M8 thread, 21 mm compact locking screw (Teknik Makina) A Locking screw TH821TM designed for secure clamping on precision calipers and similar measuring instruments, operated with a 3 mm Allen key for straightforward installation and adjustment Secure M8 thread for firm clamping Compact 21 mm length for tight assemblies Fits 3 mm Allen key for easy adjustment Reliable fastening for precision measuring equipment The component features a standard M8 thread that provides a predictable interface for clamping points in measuring equipment. This thread size is widely used in workshop fixtures, so the fastener ensures secure clamping and minimal axial play during measurement cycles. Reduced movement at the contact point improves repeatability and contributes directly to consistent measurement results in everyday inspection tasks. Compact design for confined assemblies and quick adjustment With a total length of 21 mm the fastener is tailored for installations where space is limited; its low profile permits neat integration without adding bulk to the measuring setup. Adjustment is performed with a 3 mm Allen key, which allows fast, controlled torque application and simplified maintenance during routine checks. The compact form factor supports rapid replacement and minimal downtime in production or service environments. Workshop-ready specification and procurement benefits Weighing only 0.1 kg, the item is light to handle and suitable for stocked spare-part programmes where standardisation reduces procurement complexity. The Teknik Makina origin signals compatibility with common industrial tolerances and supports interchangeability across M8 mounting points. For specification enquiries, Metav’s technical team can provide advice on fitment and spare-part planning to streamline workshop logistics. For supply and technical guidance on the TH821TM locking screw from Teknik Makina, contact Metav Werkzeuge — technical enquiries by eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: TH821TM Manufacturer: Teknik Makina Weight: 0.1 kg Dimensions & thread Thread: M8 Total length: 21 mm Compatibility & application Operates with 3 mm Allen key Intended for securing precision calipers and measuring tools FAQ How is the locking screw adjusted? The TH821TM locking screw is adjusted using a 3 mm Allen key; rotate until firm engagement is achieved, avoiding excessive torque that could distort the measuring instrument. Is this fastener suitable for precision calipers? Yes. The component is intended to secure precision calipers and similar measuring tools, offering an M8 thread and a compact 21 mm form suitable for confined mounting points. Can the TH821TM replace other M8 locking screws? Where the mounting interface accepts an M8 thread and the available axial clearance accommodates a 21 mm length, the TH821TM can be used as a compatible replacement. What are the key dimensions and weight to check for inventory management? Key specification points are: M8 thread, 21 mm total length and 0.1 kg weight; use these values when planning spares and storage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Schaftfräser für 4NKT 06 Wendeplatten Der Schaftfräser für 4NKT 06 Wendeplatten ist ein kraftvolles Werkzeug für präzise Fräsaufgaben mit Innenkühlung und langer Schaftlänge für tiefe Eingriffe Innenkühlung für bessere Spanabfuhr Passend für Taegutec 4NKT 06 Wendeplatten Schaftdurchmesser 20 mm für stabile Aufnahme Drei Schneiden für ruhigen Lauf Gesamtlänge 200 mm für tiefes Arbeiten Präzise Kühlung reduziert Werkzeugverschleiß und verbessert Prozesssicherheit Die integrierte Innenkühlung leitet Kühlschmierstoff direkt an die Schneidzone und sorgt dadurch für konstante Schnittbedingungen. Das reduziert thermische Belastungen an der Schneide und verringert Kontaktverschleiß, was die Standzeit der Wendeschneidplatten verbessert. Auf diese Weise bleibt die Schnittqualität über längere Werkstücke erhalten, und die Prozesssicherheit bei tiefen Fräsungen steigt deutlich. Stabile Aufnahme und Laufruhe für hochwertige Oberflächen Der Schaftdurchmesser 20 mm bietet eine formstabile Aufnahme im Werkzeughalter und minimiert Schwingungen bei hohen Vorschüben. Die Kombination aus drei Schneiden und einer Schneidenlänge von 25 mm ermöglicht ruhigen Lauf und gleichmäßige Spanbildung, wodurch die Oberflächen nach dem Fräsen feiner ausfallen. Diese Auslegung unterstützt effiziente Bearbeitungen bei mittleren bis anspruchsvollen Schnittbedingungen. Montage und Handling: Torx Schraube und Werkzeugzugang Die Befestigung der Wendeschneidplatten erfolgt über eine Torx Schraube M3x6,2, die mit einem Torx Schlüssel T8 sicher angezogen wird. Dieser Schraubentyp erlaubt raschen Plattenwechsel und reproduzierbares Anzugsdrehmoment, was Rüstzeiten reduziert. Das klare Schraubensystem erleichtert Wartung und Ersatzteillogistik in der Werkstatt und sorgt für schnelle Eingriffe bei wiederkehrenden Produktionsläufen. Kompatibilität mit Wendeschneidplatten und Einsatzhinweis Dieses Werkzeug ist für das Plattenformat 4NKT 06 ausgelegt und wurde so konstruiert, dass es optimal mit Wendeschneidplatten des Herstellers Taegutec zusammenarbeitet. Damit eignet sich der Fräser besonders für Anwender, die Taegutec-Platten nutzen und Wert auf präzise, wiederholbare Ergebnisse legen. Die lange Gesamtlänge von 200 mm erlaubt das Erreichen tiefer Konturen ohne zusätzlichen Sonderhalter. Empfehlung: Für effiziente Zerspanung mit Taegutec Wendeplatten 4NKT 06 empfiehlt sich der Einsatz dieses Schaftfräsers; bei Fragen zur Anwendung oder zur passenden Halterung steht Metav gern zur Verfügung – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: S474-1TM Marke: Teknik Makina Bezeichnung: Schaftfräser für 4NKT 06 Wendeplatten Produkttyp: Schaftfräser Fakten Durchmesser: 21 mm Gesamtlänge: 200 mm Schaftdurchmesser: 20 mm Schneidenlänge: 25 mm Anzahl Schneiden: 3 Gewicht: 0,524 kg SKU: S474-1TM Besonderheiten Innenkühlung: Ja (für bessere Spanabfuhr) Passend für Wendeplattenhersteller: Taegutec (Plattenformat 4NKT 06) Torx Schlüssel: T8 Torx Schraube: M3x6,2 FAQ Für welche Wendeschneidplatten ist der Fräser ausgelegt? Der Schaftfräser ist für Wendeschneidplatten im Format 4NKT 06 ausgelegt und wurde speziell auf die Geometrie dieser Platten abgestimmt, um mit Taegutec-Platten optimale Ergebnisse zu erzielen. Ist eine Innenkühlung vorhanden und welche Vorteile bietet sie? Ja, der Schaftfräser verfügt über Innenkühlung; dadurch wird Kühlschmierstoff direkt an die Schneide geführt, Spanabfuhr verbessert und die Standzeit der Wendeschneidplatten verlängert. Wie erfolgt die Montage der Wendeschneidplatten? Die Platten werden mit einer Torx Schraube M3x6,2 befestigt; zum Anziehen wird ein Torx Schlüssel T8 verwendet, was schnellen Plattenwechsel und reproduzierbare Befestigungsfestigkeit ermöglicht. Eignet sich das Werkzeug für tiefe Fräsungen? Durch die Gesamtlänge 200 mm und den stabilen Schaftdurchmesser 20 mm ist der Fräser für tiefere Eingriffe geeignet, solange geeignete Halter und Maschinensteifigkeit gegeben sind. Welche Vorteile bietet die Auslegung mit drei Schneiden? Die Konfiguration mit drei Schneiden sorgt für ruhigen Lauf, gleichmäßige Spanabfuhr und eine verbesserte Oberflächengüte bei fortlaufenden Bearbeitungen. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the rigidity of a Ø21 mm cutter, the secure Shank Ø20 mm, and the quick-change economy of indexable 4NKT06 inserts to maintain throughput with predictable tool life; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Shank milling cutter S474TM — indexable-insert milling cutter, Ø21 mm, 3-flute (Teknik Makina) The Shank milling cutter S474TM is an indexable-insert cutter designed for general milling operations with replaceable 4NKT06 inserts, offering long reach and stable clamping for industrial machining tasks Compatible with 4NKT06 Taegutec inserts Ø21 mm diameter, 3 cutting edges Shank Ø20 mm, 200 mm overall length Secured with M3x6.5 Torx screw (T8 key) Reliable rigidity for repeatable results The S474TM is built around a Ø21 mm cutting head and a Shank Ø20 mm, which together provide high rigidity and reduced deflection in axial and radial loads. The combination of a short 25 mm cutting length and a 200 mm overall length balances accessibility with stability; long-reach operations remain possible without excessive chatter. Using indexable inserts such as the 4NKT06 type means the cutting geometry can be restored instantly by rotating or replacing an insert, reducing downtime and lowering the ongoing cost per cut compared with solid-tool regrinding. Fast changeover and secure clamping for production environments Clamping is achieved with an M3x6.5 Torx screw tightened using a T8 key, providing a compact, repeatable fastening method that is straightforward to service on the shop floor. The cutter’s three-flute layout delivers a stable cutting sequence and smooth engagement, which is particularly useful when working with interrupted cuts or mixed-geometry components. With a mass of 0.524 kg the tool offers a reassuring mechanical feel during handling and set-up, while the compatibility with Taegutec indexable inserts ensures broad availability of chipbreakers and grades for a variety of workpiece materials. Practical benefits for procurement and maintenance Adopting this style of indexable-insert milling system supports predictable inventory and maintenance planning: spare inserts are low-cost and easy to stock, and the modular design reduces the number of complete cutters required. For purchasing teams the clear separation of cutter body and consumable inserts simplifies cost tracking and extends the service life of the holder. When mounted and set up correctly, the S474TM delivers consistent tool life and repeatable part quality, which in turn helps to optimise cycle times and reduce rework in batch production. Contact Metav Werkzeuge for tailored application recommendations and secure the Teknik Makina S474TM from our Emmerich stock for prompt dispatch Technical data SKU: S474TM Brand: Teknik Makina Designation: Shank milling cutter for 4NKT 0603 Indexable Inserts Facts Diameter: 21 mm Shank diameter: 20 mm Cutting length: 25 mm Overall length: 200 mm Cutting edges: 3 Weight: 0.524 kg Special features Compatible with Taegutec 4NKT06 inserts Secured with M3x6.5 Torx screw (T8 key) Indexable-insert system for quick-change maintenance FAQ How are the inserts secured in the S474TM? The inserts are retained in the cutter body and clamped by the indexable-insert pocket; the cutter itself is secured with an M3x6.5 Torx screw, tightened using a T8 key, ensuring repeatable seating. Which insert type fits the cutter? The S474TM accepts 4NKT06 indexable inserts; the tool is compatible with Taegutec variants in that ISO designation. Is the S474TM suitable for long-reach milling? With a 200 mm overall length and a 25 mm cutting length, the cutter provides extended reach while maintaining reasonable stiffness for typical shop-floor operations. What are the advantages of using indexable inserts with this cutter? Indexable inserts restore cutting geometry quickly, reduce downtime, and lower per-cutting-edge costs compared with regrinding solid tools; the S474TM’s design supports rapid insert changes. Can the cutter be used with different insert grades? Yes, the S474TM accepts standard 4NKT06 insert grades from manufacturers such as Taegutec, allowing selection of grades for wear resistance or toughness according to the workpiece material Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High rigidity and precise compatibility with XNEX 0403 indexable inserts combine with a 20 mm shank and a 21 mm cutting diameter to deliver stable, efficient milling performance; order and further procurement can be arranged via Metav Werkzeuge or discussed with the technical consultants for integration support. S196TM — Indexable milling cutter, Ø21 mm, 20 mm shank (Teknik Makina) The S196TM is an indexable milling cutter designed for use with XNEX 0403 indexable inserts, optimised for secure insert clamping and reliable machining in CNC and conventional setups. Indexable system for XNEX 0403 inserts 21 mm cutting diameter for medium cuts 20 mm shank for secure toolholding Torx fastening M2.5x7, T8 key Stable insert compatibility for predictable machining results The tool is engineered around the XNEX 0403 insert system to ensure a repeatable clamping interface and reduced setup variation. A 20 mm shank enhances axial stability in standard holders, while the Ø21 mm cutting diameter balances rigidity and accessibility. These design choices result in consistent tool life and predictable cutting behaviour, which supports efficient process planning and reduces unplanned downtime. Efficient material removal with three cutting edges A three-edge geometry provides a consistent chip formation and an even distribution of cutting forces; this leads to smoother surface generation and steady feed performance. The configuration is particularly effective where indexable tooling is preferred for fast insert changes, since the replaceable edges allow for rapid recovery between tool changes and minimise non-productive time. The overall length of 150 mm offers sufficient reach without excessive overhang. Secure fastening and straightforward maintenance Insert retention is achieved via a Torx M2.5x7 fastening system requiring a T8 key, enabling precise torque application and reliable clamping. The fastening concept supports repeatable insert seating, which preserves cutting geometry and extends usable insert life. Where on-site tool service is required, the modular nature of indexable systems simplifies maintenance and reduces the need for specialist regrinding. Integration into production flows and toolholders The cutter’s standard 20 mm shank diameter is compatible with common toolholders and collet systems, while the tool geometry is suited to a range of milling strategies where indexable insert solutions are advantageous. The single SKU reference supports inventory control and ordering within tool management systems, and the robust mechanical design contributes to reduced vibration and improved dimensional control during machining. For procurement or technical integration of Teknik Makina indexable tooling, contact Metav Werkzeuge in Emmerich for precise advice and order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S196TM Manufacturer: Teknik Makina Product type: Indexable milling cutter for XNEX 0403 inserts Facts Cutting diameter: Ø21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting edges: 3 Torx screw: M2.5x7 Torx key size: T8 Special features Compatible inserts: XNEX 0403 Compatible insert manufacturer: SECO Brand: Teknik Makina SKU: S196TM FAQ Which insert type fits this cutter? The cutter is designed for XNEX 0403 indexable inserts; compatibility with SECO-manufactured XNEX 0403 inserts is specified. What is the shank diameter and how does it affect clamping? The tool features a 20 mm shank, which provides secure clamping in standard holders and contributes to reduced run-out and improved rigidity. How many cutting edges does the tool have and what is the benefit? The cutter has three cutting edges, which promote even chip formation and steady cutting forces, improving surface quality and tool life. What fastening system secures the inserts? Inserts are secured with a Torx M2.5x7 screw; a T8 key is specified for proper tightening and repeatable clamping. Is the overall length suitable for typical operations? With an overall length of 150 mm, the tool offers an adequate reach for many milling tasks while maintaining stiffness for reliable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust build quality, precise 21 mm drilling capacity and straightforward insert replacement to keep cycle times low and maintenance simple; order the indexable drill directly via Metav Werkzeuge or contact our consultants for application advice. Indexable drill U110TM – 21 mm diameter, 121 mm overall length (Teknik Makina) The Indexable drill U110TM is designed for precision holemaking in metalworking setups, offering reliable clamping and insert compatibility for efficient production runs. 21 mm cutting diameter 42 mm cutting length 25 mm shank diameter Compatible with Korloy WCM-0402 inserts Stable clamping for consistent hole quality A rigid 25 mm shank paired with the drill’s construction delivers stable clamping and reduced runout, which translates directly to more consistent bore tolerances and fewer rejected parts. The tool’s geometry and shank interface are chosen to reduce vibration under load, supporting repeatable results in batch production and CNC operations. Emphasis on mechanical stability reduces the need for secondary rework and helps maintain machine spindle life. Deep cutting length for extended reach and fewer tool changes With a 42 mm cutting length and a 121 mm overall length, the tool provides reach for deeper bores without sacrificing rigidity. Longer effective reach means fewer tool changes in multi-step processes and improved workflow on components with recessed holes. The balanced flute design promotes reliable chip evacuation, lowering the risk of chip packing in deep holes and helping to sustain a steady material removal rate. Indexable inserts to lower running costs and downtime Compatibility with Korloy WCM-0402 indexable inserts allows rapid insert changes and a predictable cost-per-hole calculation. Using replaceable inserts reduces tool regrind cycles and permits immediate restoration of cutting performance on the shop floor. The combination of insert standardisation and a purpose-built tool body supports high utilisation rates and simplified inventory management for maintenance teams. Practical fit for workshop and production environments The U110TM’s dimensions—21 mm diameter and 121 mm overall length—make it suitable for many common metalworking tasks where a robust, indexable solution is preferred over solid drills. The relatively low mass facilitates handling during tool setup while the standardised insert pocket enables quick replacement. For procurement, Metav’s Emmerich distribution acts as a reliable quality filter for European operations, ensuring fast availability and consistent product standards. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to specify the Teknik Makina U110TM indexable drill for applications requiring a 21 mm diameter and Korloy WCM-0402 inserts; our consultants will advise on holder choice and delivery options Technical Data Article number: U110TM Manufacturer: Teknik Makina Facts Diameter: 21 mm Overall length: 121 mm Cutting length: 42 mm Shank diameter: 25 mm Holder/adapter length: 56 mm Weight: 0.34 kg Special features Compatible with Korloy WCM-0402 inserts Insert manufacturer: Korloy Tool type: Indexable drill SKU: U110TM FAQ Which insert grade fits this drill most commonly? The U110TM is designed for Korloy WCM-0402 inserts; selection of grade depends on the workpiece material and cutting data. What are the main dimensional limits of the tool? The tool offers a 21 mm diameter, 42 mm cutting length and 121 mm overall length as standard dimensions. Is the shank compatible with common 25 mm toolholders? Yes, the 25 mm shank is suitable for holders and collets designed for that diameter, enabling secure clamping for machining. How does indexable technology affect maintenance? Indexable inserts on the U110TM reduce downtime by allowing fast insert replacement, lowering maintenance effort compared with regrinding solid tools. Can this tool achieve high material removal rates? The tool body and insert combination are intended to support efficient cutting; actual rates depend on workpiece material, insert grade and machine power. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust indexable-insert compatibility and a secure 25 mm shank for consistent, repeatable drilling cycles; the 84 mm cutting length enables deep, productive cuts while the compact 163 mm overall length simplifies tool storage and handling. Order directly via Metav Werkzeuge or ask our consultants for machining recommendations. Indexable Insert Drill U610TM — 21 mm diameter, 163 mm overall length (Teknik Makina) The Indexable Insert Drill U610TM is a drill body engineered for insert-based drilling in industrial CNC and production environments, compatible with Korloy WCM‑0402 inserts for cost-efficient machining. 21 mm diameter for medium-depth drilling Compatible with Korloy WCM‑0402 inserts 84 mm cutting length for deep operations 25 mm shank for secure clamping Faster throughput by using indexable inserts This drill body is designed to support indexable inserts, which reduce downtime and lower per-hole tooling costs compared with one-piece drills. The use of Korloy WCM‑0402 inserts means cutting edges can be rotated or replaced rapidly, restoring cutting performance without full tool changeover. For production environments this translates into higher machine availability, predictable tool-change cycles and a more economical cost-per-hole calculation — particularly when drilling long runs or mixed-batch work. Secure clamping and stable tool engagement for repeatability A 25 mm shank ensures reliable clamping in standard tool holders and chucks, promoting concentricity and consistent hole quality. The combination of a 21 mm diameter and 84 mm cutting length gives a balance between rigidity and reach: sufficient engagement for deeper holes without excessive deflection. The tool’s 0.411 kg mass contributes to stable spindle behaviour, and the 163 mm overall length keeps the assembly compact, simplifying handling and storage in busy toolrooms. Practical workshop benefits and material guidance As an insert-compatible drill body, the tool offers straightforward maintenance procedures and rapid reconditioning of the cutting geometry via insert changes. This approach is particularly beneficial where mixed materials are machined and inserts can be selected for specific workpiece requirements. The drill body is supplied with clear dimensional data and is suited for integration into standard CNC drilling workflows; its compatibility with established Korloy inserts supports spare-part availability and predictable supply chains. For production-ready indexable drilling consult Metav Werkzeuge about stock and technical matching for the U610TM; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific machining tasks Technical data Article number: U610TM Manufacturer: Teknik Makina Product name: Indexable Insert Drill (Vollbohrer) Core dimensions Diameter: 21 mm Overall length: 163 mm Cutting length: 84 mm Shank length: 56 mm Shank diameter (clamping): 25 mm Weight: 0.411 kg Compatibility & special features Compatible inserts: WCM‑0402 Compatible insert manufacturer: Korloy Suitable for insert-based drilling operations SKU: U610TM FAQ What insert types does this drill accept? The U610TM is designed for WCM‑0402 indexable inserts and is compatible with inserts from Korloy for quick edge replacement. Which shank size is required for secure clamping? A 25 mm shank diameter is specified for clamping; use a holder or chuck rated for a 25 mm shank to ensure concentricity. How deep can this tool cut effectively? The tool provides an 84 mm cutting length, suitable for medium-to-deep drilling tasks while maintaining rigidity. Is the U610TM suitable for high-volume production? Yes — the indexable-insert design supports rapid insert changes and predictable tool life, which benefits high-volume production runs. What are the overall dimensions for tool planning? Overall length is 163 mm with a 21 mm nominal drilling diameter; these dimensions simplify tool-change planning and storage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine reliable indexable milling with efficient insert replacement and robust shaft dimensions to maintain steady production. Benefit from the 21 mm cutting diameter, 20 mm shank rigidity and compatibility with BLMP 0603 inserts; order the S480TM directly via Metav Werkzeuge or consult our tooling specialists for fitment advice. S480TM indexable milling cutter for BLMP 0603 inserts — 21 mm diameter, 3 cutting edges (Teknik Makina) The S480TM is a shaft-style milling cutter engineered for use with BLMP 0603 indexable inserts and intended for heavy-duty face and shoulder milling applications where quick insert changes and consistent cutting performance are required. *Compatible with Taegutec BLMP 0603 inserts *21 mm cutting diameter for consistent engagement *20 mm shank diameter for rigid clamping *Torx M3x6.5 screw, T8 key for secure fixing Stable cutting and vibration control for predictable results The indexable cutter body delivers stability through a 20 mm shank and a 21 mm cutting diameter, which together reduce deflection at the toolholder interface and improve repeatability during passes. With 3 cutting edges, the geometry balances chip load and engagement for smooth material removal. The specified 40 mm cutting length and 200 mm overall length are designed to offer a useful reach while keeping overhang manageable, resulting in a more controlled cut and longer reliable tool life per insert change. Quick insert service and secure clamping to minimise downtime Tool changes are straightforward thanks to the standardised fixing system: the head is secured with an M3x6.5 Torx screw and tightened using a T8 key, enabling fast, repeatable replacement of BLMP 0603 inserts. This simple clamping solution reduces setup time and lowers intervention effort on the shop floor. The compatibility with Taegutec insert geometry ensures broad availability of grades and chipbreakers, supporting rapid restoration of cutting performance after each index. Production benefits that add value to everyday machining By combining an indexable cutter body with replaceable inserts, the system reduces per‑edge cost compared with solid cutters while preserving high removal rates. The modular approach supports inventory control and predictable operating costs: keep a small stock of inserts and screws to restore cutting capability quickly. The cutter’s mass of 0.52 kg supports stable rotation at moderate speeds without unnecessary inertia, helping to maintain surface finish and dimensional accuracy in repetitive tasks. Practical fitment and suitable applications The design is intended for standard milling setups where BLMP 0603 inserts are preferred for shoulder and face operations. The S480TM is suitable for shops that require a robust, easy‑to‑service cutter body compatible with widely available inserts from Taegutec. Its measured dimensions and standard fixing mean integration into existing toolholders and workflows is straightforward; the combination of shank rigidity and concise cutting length makes it particularly apt for medium‑depth slotting and peripheral machining where predictable engagement is essential. For tailored advice on integrating the S480TM into production or for information on compatible insert grades and holder selection, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will advise on tooling and supply. Technical Data SKU: S480TM Manufacturer: Teknik Makina Description: Milling cutter body for BLMP 0603 indexable inserts Secondary description: for BLMP 0603 Indexable Inserts Facts Cutting diameter: 21 mm Number of cutting edges: 3 Shank diameter: 20 mm Cutting length: 40 mm Overall length: 200 mm Weight: 0.52 kg Special features Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Fixing screw: M3x6.5 Torx Required key: T8 FAQ What insert type does this cutter accept? The cutter is designed for BLMP 0603 indexable inserts, allowing use of standard grades and chipbreakers for various materials. Is the S480TM compatible with Taegutec inserts? Yes, the S480TM is compatible with inserts from Taegutec that conform to the BLMP 0603 format. What are the key dimensions to check for toolholder compatibility? Important dimensions are the 20 mm shank diameter, 21 mm cutting diameter and the 200 mm overall length; verify holder clamping and available overhang before fitting. Which fastening components are required for insert replacement? Insert fixing requires an M3x6.5 Torx screw and a T8 key for secure clamping and repeatable replacement. For what types of milling is this cutter best suited? The cutter body is intended for face and shoulder milling applications where indexable inserts provide a cost‑effective and fast service solution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-based solution that combines internal coolant and proven compatibility with BLMP 0603 indexable inserts to boost cycle reliability and reduce tool-change times. Order through Metav Werkzeuge or request consultancy for setup and integration. Shank milling cutter (for BLMP 0603 indexable inserts) — 21 mm diameter, internal coolant — Teknik Makina A shank milling cutter designed for indexable-insert milling with an integrated coolant channel, providing secure insert fixation and extended tool life in production environments. 21 mm cutting diameter Internal coolant for chip control Compatible with BLMP 0603 (Taegutec) Precision and reliable coolant delivery for steady machining Built around a robust 21 mm cutting diameter and an integrated internal coolant channel, this shank milling cutter delivers stable temperatures at the cutting zone and improved chip evacuation. The combination of coolant-fed geometry and a three-edge configuration ensures consistent cutting conditions and reduces the tendency for built-up edge, which in turn supports predictable cycle times and fewer unscheduled tool changes. The tool is particularly suited to workflows that rely on indexable inserts for rapid recovery and repeatable performance. Rigid design for secure clamping and reach The tool features a 20 mm shank and a 200 mm overall length, with a 40 mm cutting length that balances reach and rigidity. The three cutting edges offer an even load distribution and steady engagement, while the insert is secured with an M3x6.2 screw tightened with a T8 Torx interface. These specifications translate into a tool that is easier to clamp accurately and that maintains concentricity over longer runs, helping to protect workpiece tolerances and reduce rework. Fast insert changes and proven compatibility This cutter is engineered specifically for BLMP 0603 indexable inserts and is compatible with inserts from Taegutec, enabling straightforward integration into existing insert inventories. Use of standardised insert geometry shortens downtime for edge replacement and simplifies stocking. The modular approach promotes operational efficiency in high-mix or high-volume shops where uptime and quick recovery are priorities. Practical procurement and application advice The tool is identified by SKU S480-1TM and is supplied in a configuration that highlights serviceability and routine handling. The modest weight and standard interfaces make the cutter straightforward to include in common toolholders and changeover procedures. For customers seeking a balance of accessibility and precision, the combination of insert compatibility and internal coolant provides a practical route to improved productivity without extensive process requalification. Contact Metav Werkzeuge for tailored technical advice and procurement of the Teknik Makina S480-1TM shank milling cutter, optimised for use with BLMP 0603 inserts and supported from Emmerich by experienced application consultants Technical data SKU: S480-1TM Label: 21mm Schaftfräser BLMP 0603 L200mm mit Innenkühlung ECLASS: 21180806 Manufacturer: Teknik Makina Facts Diameter: 21 mm Shank diameter: 20 mm Overall length: 200 mm Cutting length: 40 mm Cutting edges: 3 Weight: 0.521 kg Special features Internal coolant For BLMP 0603 indexable inserts Compatible with Taegutec inserts Torx screw: M3x6.2 Torx key: T8 FAQ Which inserts fit this milling cutter? The cutter accepts BLMP 0603 indexable inserts; compatibility with Taegutec inserts is specified for straightforward stocking and replacement. Is the cutter supplied with internal coolant? Yes, the design includes an internal coolant channel to support chip evacuation and thermal stability during machining. What are the key dimensions to check for holder compatibility? Refer to the 20 mm shank and 200 mm overall length; the 40 mm cutting length and 21 mm diameter are also relevant for fixture and toolholder selection. How is the insert secured and what tool is required? The insert is fastened with an M3x6.2 screw using a T8 Torx key; these standard interfaces simplify maintenance and fast replacement. What is the product SKU for ordering or stock management? The product is listed as S480-1TM, which identifies the Teknik Makina shank milling cutter configured for BLMP 0603 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines internal coolant, precision fit for WNMX 0603 inserts and a robust 150 mm overall length to reduce setup time and tool changes. Order directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. Shank milling cutter by Teknik Makina — 21 mm diameter with internal coolant Shank milling cutter for WNMX 0603 indexable inserts, designed for precision milling where coolant-through capability and standard insert compatibility matter Internal coolant for effective cooling Compatible with WNMX 0603 (Korloy) inserts 21 mm cutting diameter, 20 mm shank Robust 150 mm overall length, 2 cutting edges Precision compatibility that shortens setup and stocking This shank milling cutter is engineered for shops standardising on indexable inserts. With support for WNMX 0603 inserts from Korloy, the tool simplifies inventory and reduces the number of different cutters required across similar operations. Standardising on a common insert format means fewer changeovers and predictable regrinds, which translates into lower effective tooling costs and smoother production planning. The internal coolant channel further contributes to consistent cutting conditions by directing coolant to the cutting zone. Performance gains through cooling and controlled chip flow Built for steady material removal, the cutter’s 21 mm cutting diameter and 2 cutting edges are matched to a 20 mm shank to deliver concentricity and rigidity in the holder. The internal coolant capability improves heat management at the insert edge, supporting longer insert life and reduced risk of built-up edge under intermittent machining. For operations prioritising throughput and surface quality, these attributes lead to measurable efficiency improvements per component produced. Practical specifications that aid maintenance and assembly Maintenance and insert changes are straightforward: the indexable inserts are secured with an M2.5x6.5 screw that is tightened using a T8 Torx key, ensuring reliable clamping and repeatable positioning. The tool’s 150 mm overall length provides reach without excessive overhang, while the modest mass (0.379 kg) helps maintain spindle balance. Supplied as SKU S904-1TM, the cutter supports quick replacement of inserts and predictable toolholding, which keeps machine downtime to a minimum and production schedules on track. Discuss Teknik Makina tooling with Metav Werkzeuge to align this internal-coolant shank milling cutter to the workshop’s insert strategy and ensure rapid supply from our Emmerich hub Technical data Article number: S904-1TM Label: 21mm Schaftfräser WNMX 0603 L150mm mit Innenkühlung Manufacturer: Teknik Makina Dimensions & core data Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.379 kg Torx key required: T8 Torx screw: M2.5x6.5 Materials & features Internal coolant: yes Compatible inserts: WNMX 0603 (Korloy) eClass: 21180806 Category path: Zerspanen › Schaftfräser Product type: Shank milling cutter FAQ Which inserts fit this cutter? The cutter accepts WNMX 0603 indexable inserts, compatible with inserts from Korloy, enabling straightforward procurement and interchangeability. Is the tool coolant-through capable? Yes, the shank milling cutter features internal coolant, allowing directed coolant flow to the cutting edge for improved thermal control. What are the key dimensions to check for holder compatibility? Check the 21 mm cutting diameter and the 20 mm shank diameter against the toolholder; the overall length is 150 mm (SKU S904-1TM). Which fastening parts are used for the inserts? Inserts are secured with an M2.5x6.5 screw and require a T8 Torx key for tightening and removal. How many cutting edges does the tool have and what is the impact? The tool has 2 cutting edges, offering a balance between material removal rate and finish; fewer edges can simplify chip evacuation while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com