Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of precise indexable drilling, robust clamping and straightforward insert replacement for efficient shop-floor machining; order directly via Metav Werkzeuge or contact the consultants for tailored tooling advice. Vollbohrer U316TM – Indexable insert drill body, 21 mm diameter (Teknik Makina) the Vollbohrer U316TM is an indexable insert drill body designed for medium-depth holemaking in production and workshop environments Diameter 21 mm for standard hole sizes Compatible with Taegutec SOMT 0703 inserts 63 mm cutting length for deeper bores 25 mm shank for secure clamping Precision and productivity combined for repeatable holemaking The drill body delivers consistent hole quality through its rigid design and defined cutting length. With a 21 mm diameter and 63 mm of cutting length, the tool reduces the need for multiple operations by enabling single-pass holemaking where material and process allow. The use of indexable inserts means cutting edges can be replaced rapidly, lowering downtime and keeping cycle times short while maintaining dimensional stability across production runs. Cost-efficient machining through replaceable inserts A key economic advantage is the compatibility with Taegutec SOMT 0703 inserts: worn edges are exchanged instead of replacing the entire tool body, which reduces tooling costs and stock complexity. The combination of an exchangeable insert system and a 25 mm shank for secure clamping helps to preserve spindle life and maintain constant run-out, translating into fewer rejected parts and a more predictable cost per hole. Simple integration with common spindle setups The tool’s 141 mm overall length and defined shank geometry allow straightforward mounting in standard holders and adaptors. The compact yet rigid proportions minimise deflection during cutting, which supports tighter tolerances and better surface finishes. For shops upgrading from solid drills, the indexable system provides a rapid return on investment where frequent edge changes or interrupted cuts occur. Practical handling and maintenance on the shop floor At roughly 0.377 kg, the body is easy to handle during insert changes and set-up, without compromising stability when clamped. The clear insert designation and matching manufacturer make re-orders and inventory management simple. Routine maintenance is limited to checking screw torque and insert condition, which keeps maintenance intervals short and predictable. Contact Metav Werkzeuge for personalised tooling recommendations and supply from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the U316TM and suitable insert packages Technical data Article number: U316TM Manufacturer: Teknik Makina Facts Diameter: 21 mm Overall length: 141 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.377 kg Special features Compatible with Taegutec SOMT 0703 inserts Indexable insert drill body Files: 62de7ec1bd24461b3d5f7a4e, 62de7dd60f56dbb4de4dbedb FAQ What materials can be machined with this drill body? The Vollbohrer U316TM from Teknik Makina accepts Taegutec SOMT 0703 inserts and is suitable for general-purpose machining; selection of the correct insert grade determines suitability for steel, stainless steel or cast materials. Which insert type fits the U316TM? This drill body uses SOMT 0703 indexable inserts by Taegutec; using the recommended insert grade for the application ensures the best balance between tool life and surface finish for the U316TM (SKU U316TM). How deep can holes be drilled in a single pass? With a 63 mm cutting length, the tool allows efficient single-pass drilling within that effective cutting zone; deeper bores require staged operations or through-tool coolant solutions depending on material and process. Is the shank compatible with standard toolholders? The 25 mm shank diameter provides secure clamping in common holders; the design of the U316TM supports stable mounting for consistent concentricity and repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise combination of 21 mm diameter, 84 mm cutting length and a secure 25 mm shank to improve hole quality and cycle-time stability; order the tool directly via Metav Werkzeuge or consult the team for integration advice. Vollbohrer U416TM — Indexable drill body, 21 mm diameter, 25 mm shank (Teknik Makina) A robust Vollbohrer U416TM designed as an indexable drill body for medium-depth bores in production environments; compatible with SOMT 0703 inserts and optimised for secure clamping and repeatable accuracy. 21 mm diameter for standard bores 84 mm effective cutting length 25 mm shank for secure clamping Compatible with SOMT 0703 inserts (Taegutec) Consistent hole quality with an indexable system This indexable drill body delivers repeatable results by combining a stable holder design with an 84 mm cutting length. The geometry is tuned for consistent chip evacuation and reduced runout, which translates into fewer rejected parts and less rework. As an indexable system, the concept separates the body from the cutting edges: worn inserts are replaced quickly without discarding the body, yielding lower running costs and minimal machine downtime. The measured values—21 mm diameter and the specified engagement length—allow planners to predict material removal rates and adapt feeds and speeds with confidence. Stable clamping and process security A secure 25 mm shank and a compact 56 mm holder length ensure the tool seats firmly in the spindle, reducing vibration and improving surface finish. The combination of shank diameter and overall length provides mechanical rigidity that benefits bore straightness and tool life. Reduced vibration lowers insert wear, meaning fewer indexings per production run and more predictable maintenance intervals. These attributes support a stable process window on machining centres where repeatability is decisive for throughput. Plug-and-run compatibility for flexible production planning The tool is specified for use with SOMT 0703 indexable inserts and is compatible with Taegutec insert families, allowing rapid reconfiguration across common insert grades and coatings. For operations running mixed materials, the insert-based approach simplifies grade selection—switching insert geometry or substrate instead of changing the entire tool body. This flexibility supports lean tool inventories and speeds up job changeovers in small-batch or high-mix manufacturing environments. Practical benefits for procurement and workshop teams Lightweight at about 0.417 kg, the drill body is easy to handle during tool assembly and storage while still providing the necessary stiffness for production use. The standardised dimensions make it straightforward to integrate into existing tool lists and holders. From a procurement perspective, selecting an indexable solution that accepts a widely used insert size reduces long-term consumable costs and simplifies supplier management—advantages that align with Metav’s mission to make precision affordable and dependable. Contact Metav Werkzeuge for availability, technical integration guidance and order information for the Teknik Makina indexable drill body U416TM; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: U416TM Manufacturer: Teknik Makina Name: Vollbohrer Facts Diameter: 21 mm Overall length: 162 mm Cutting length: 84 mm Holder length: 56 mm Shank diameter: 25 mm Weight: 0.417 kg SKU: U416TM Special features Compatible inserts: SOMT 0703 Inserts manufacturer: Taegutec Indexable drill body design FAQ Which insert type fits the drill body? The drill body accepts SOMT 0703 indexable inserts; compatible insert grades from Taegutec can be used for different materials and cutting conditions. What are the key dimensions to check for machine setup? Refer to the 21 mm diameter, 162 mm overall length and 25 mm shank when programming spindle reach and verifying holder compatibility for the U416TM. Is the tool suitable for long overhangs? The U416TM is optimised for medium-depth bores; the specified 84 mm cutting length and shank dimensions favour stable setups rather than long overhang operations. How does the indexable concept reduce operating costs? By replacing only the worn SOMT 0703 inserts instead of the entire body, the system reduces consumable spend and shortens machine downtime for tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, workshop-ready drilling solution that pairs Ø21 mm performance with a 25 mm shank and a 105 mm cutting length for stable, repeatable holemaking; order the tooling through Metav Werkzeuge or consult the technical team for application guidance. Indexable drill U781TM — Ø21 mm, 105 mm cutting length A robust U781TM indexable drill designed for precise, deep-hole machining in production environments and general workshop use High-stability 25 mm shank 105 mm cutting length for deep holes Compatible with Korloy WCm-0402 inserts Balanced Ø21 mm body for reliable feeds Consistent hole quality and higher machining efficiency The tool body delivers a rigid drilling platform that reduces vibration and runout, directly improving dimensional repeatability and surface finish. With a Ø21 mm diameter and 105 mm cutting length, this solution enables deeper holemaking without compromising stability. The 25 mm shank contributes to firm clamping in standard toolholders, which reduces micro-movements during interrupted cuts; the result is fewer rework cycles and a measurable improvement in cycle-time efficiency on serial operations. Technical features are translated into operational gains: tighter tolerances and less scrap, supporting a leaner production flow. Rapid tooling change and proven insert compatibility Designed to accept inserts from a major manufacturer, the drill body fits Korloy indexable plates of type WCm-0402, simplifying inventory and set-up. Using a standardised insert format shortens changeover time and lowers tooling costs by allowing re-use of bodies across multiple insert types where applicable. The modular approach makes maintenance straightforward: worn inserts are replaced rather than the entire tool, which reduces overall tooling expenditure and keeps spindle downtime to a minimum. The compatibility also streamlines procurement and ensures that replacement inserts are widely available for continuous operation. Workshop robustness, handling and maintenance advantages Constructed for everyday use in industrial environments, the tool balances cutting performance with serviceability. With an overall length of 184 mm and a body weight of 0.451 kg, handling on the bench and during tool changes is practical while maintaining the mass required for damping. The 56 mm shank engagement length secures axial stability in holders rated for 25 mm shanks. Routine checks for insert seating and clamping torque suffice to preserve accuracy; the modular design avoids complex regrinding and keeps maintenance cycles short. This combination of features supports reliable throughput and predictable tooling life in mixed-production settings. For a tailored recommendation on application parameters or to secure supply of the Teknik Makina U781TM from Metav Werkzeuge — including delivery from the Emmerich site and guidance on compatible Korloy WCm-0402 inserts — contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U781TM Manufacturer: Teknik Makina Product: Indexable drill (U781TM) Facts Diameter: 21 mm Overall length: 184 mm Cutting length: 105 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.451 kg Special features Compatible with Korloy inserts Accepts WCm-0402 insert type Indexable design for insert replacement Suitable for production and workshop use FAQ Which insert type fits this drill? The drill accepts WCm-0402 indexable inserts; the body is specified to match Korloy plate geometry for secure seating and repeatable performance. What is the usable cutting length? The tool provides a cutting length of 105 mm, enabling deeper holemaking while maintaining stability for serial production tasks. What shank size is required for clamping? A 25 mm shank diameter with a 56 mm engagement length ensures secure clamping in compatible holders and supports rigidity during heavy-duty cuts. Is the drill suitable for workshop and production environments? Yes; the indexable-body design and balanced Ø21 mm diameter make the tool well suited to both workshop and industrial production, offering ease of maintenance and predictable tool life. How does the U781TM reduce tooling costs? By using replaceable WCm-0402 inserts, the U781TM limits expenditure to consumable plates rather than full-body replacements, shortening downtimes and lowering long-term tooling spend. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable drill body that combines straightforward maintenance with precise, repeatable holemaking: the 21 mm nominal diameter, coupled with a 25 mm shank and a 63 mm cutting length, delivers consistent results with low downtime. Order via Metav Werkzeuge or contact our advisors for technical clarification. U020TM indexable drill body – 21 mm nominal diameter, 25 mm shank (Teknik Makina) A compact U020TM indexable drill body for medium-depth holemaking, compatible with Korloy SPMT 0702 inserts and designed for secure mounting in 25 mm toolholders. Compatible with SPMT 0702 inserts 21 mm nominal diameter 25 mm shank for secure clamping 63 mm cutting length Consistent hole quality through rigid design The solid construction of this indexable drill body supports stable cutting and helps to reduce runout, which in turn improves hole concentricity and tool life. With a 21 mm nominal diameter and an overall length of 142 mm, the geometry is balanced for machining centres where predictable tool behaviour is required. The relatively low mass at 0.395 kg contributes to smoother acceleration and deceleration on CNC spindles, reducing vibration and helping to protect both spindle bearings and inserts. For buyers seeking dependable repeatability, the mechanical specification emphasises stability and consistent holemaking performance. Reduced downtime thanks to insert compatibility By accepting SPMT 0702 indexable inserts from Korloy, the tool minimises production interruptions for regrinding: worn cutting edges are replaced in seconds rather than hours. This indexable concept separates the cutting geometry from the holder, simplifying inventory and lowering cost per hole over a production run. The result is a pragmatic combination of serviceability and economical operation, especially useful where a rapid switch between fresh cutting edges maintains cycle time and quality. Clear dimensions for straightforward integration Key mounting and cutting dimensions are explicit to aid planning: 25 mm shank, 63 mm cutting length, holder length 56 mm, and 142 mm overall length. These figures allow engineers to assess reach, clamping requirements and compatibility with collets or hydraulic chucks without guesswork. The compact design helps to limit tool overhang, improving rigidity in operations where lateral stability is important. When documenting fixture setups or tool tables, these measurable values give a verifiable basis for choosing suitable holders and reporting expected tool engagement. Supply reliability and partner credentials Sourcing this component through Metav combines access to a wide industrial range with a quality filter at the Emmerich logistics hub. Metav’s long-standing experience in precision tooling ensures consistent product availability and transparent order handling for workshops and production facilities. For procurement teams that value traceability and dependable supply, the combination of a recognised drill-body concept with Metav’s distribution framework supports uninterrupted production planning. For technical advice on Teknik Makina’s U020TM or to arrange procurement through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930; assistance is available to verify toolholder compatibility and delivery options. Technical data Article number: U020TM Manufacturer: Teknik Makina SKU: U020TM ECLASS: 21180201 Facts Diameter: 21 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Holder (tool) length: 56 mm Weight: 0.395 kg Special features Compatible with SPMT 0702 inserts Insert manufacturer compatibility: Korloy Indexable drill body design FAQ Which inserts are compatible with this drill body? The drill body accepts SPMT 0702 indexable inserts; Korloy is specified as the compatible insert supplier for this design. What are the main dimensions to check for integration? Important dimensions are 21 mm diameter, 25 mm shank, 63 mm cutting length and 142 mm overall length; these values should be compared with holder and chuck specifications before ordering U020TM. Is the shank size suitable for standard toolholders? The 25 mm shank is intended for holders and chucks that accept a 25 mm diameter tool; confirm the toolholder clamping range against the shank size for secure mounting. How quickly can inserts be replaced during production? Insert replacement follows the standard indexable-insert routine: worn inserts such as SPMT 0702 are removed and replaced rapidly, significantly reducing downtime compared with regrinding solid tools. Can the drill body be used for deep holes given its overall length? With an overall length of 142 mm and a cutting length of 63 mm, the tool suits medium-depth holemaking; check required reach and tool overhang to ensure rigidity for a given setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable drilling solution that pairs a stable 25 mm shank with an effective 84 mm cutting length, delivering reliable holemaking and reduced setup time. Order the solid drill directly via Metav Werkzeuge or ask our consultants if needed. Solid drill U721TM — indexable drill with Ø 21 mm and 25 mm shank (Teknik Cutting Tools) A compact solid drill U721TM engineered for indexable-insert drilling with SPMG 0602 inserts, aimed at CNC and turning-centre operations that require repeatable, stable holemaking. *Indexable design for SPMG 0602 inserts *Ø 21 mm cutting diameter *25 mm shank for stable clamping *84 mm cutting length for deep holes Precision geometry that keeps machining consistent The tool’s engineered geometry provides a repeatable cutting action that supports high-quality hole profiles with minimal rework. The combination of a defined cutting length of 84 mm and a focused point geometry reduces run-out sensitivity, which translates into fewer rejected parts and less secondary finishing. This stability is supported by the 25 mm shank, designed for secure clamping in standard toolholders, helping to maintain concentricity over long production runs and enhancing overall process reliability. Compatible system that simplifies tooling logistics Integration with established insert standards is a practical advantage: the drill accepts SPMG 0602 inserts and is compatible with leading insert manufacturers Taegutec and YG-1, enabling straightforward sourcing and replacement. This compatibility reduces inventory complexity and facilitates quick changeovers on the shop floor. The indexable concept separates cutting geometry from the body, so edge refreshment is rapid and cost-effective compared with solid-carbide replacements. Stable handling for continuous operation A compact overall length of 163 mm and a modest mass of 0.387 kg balance rigidity with manoeuvrability, improving tool life and reducing vibration in routine operations. The 25 mm shank and a 56 mm effective clamping zone ensure secure retention in a wide range of holders, which lowers the risk of tool movement during machining and preserves the life of both inserts and machine spindles. These attributes support longer uninterrupted cycles and predictable maintenance intervals. Practical productivity gains on CNC and turning centres Designed for straightforward integration into production, the tool yields measurable efficiency benefits: fewer insert changes, predictable downtimes and consistent bore quality. The indexable design is particularly effective where batch sizes or frequent tool exchanges are common, as the replaceable SPMG 0602 inserts restore cutting performance without the need to replace the entire drill body. For operations seeking to streamline tooling while maintaining performance, this solution offers a pragmatic balance between uptime and consumable costs. For tailored advice on integrating the Teknik Cutting Tools indexable solution into a production cell, contact Metav Werkzeuge in Emmerich for fast supply and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U721TM Manufacturer: Teknik Makina Cutting diameter: 21 mm Overall length: 163 mm Cutting length: 84 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.387 kg Facts Ø 21 mm Total length 163 mm Cutting length 84 mm Shank diameter 25 mm Shank length 56 mm Weight 0.387 kg Special features Compatible inserts: SPMG 0602 Compatible manufacturers: Taegutec; YG-1 SKU: U721TM Brand: Teknik Makina FAQ What insert type does the drill use? The U721TM accepts SPMG 0602 indexable inserts; replacement inserts from Taegutec and YG-1 are compatible. What are the key dimensions for setup? Key dimensions for the solid drill U721TM are Ø 21 mm, overall length 163 mm, cutting length 84 mm and a 25 mm shank diameter. Is the shank suitable for standard toolholders? Yes, the 25 mm shank of the U721TM is intended for stable clamping in common holders used on CNC machines and turning centres. How does using indexable inserts benefit production? Indexable inserts on the U721TM allow rapid edge changes and lower consumable costs compared with full-body replacements, reducing machine downtime and simplifying stock management. Which manufacturers’ inserts are confirmed compatible? Compatibility is confirmed with insert suppliers Taegutec and YG-1 for the specified SPMG 0602 grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 25 mm shank for stable clamping, compatibility with SPMG 0602 indexable inserts and a 63 mm cutting length to maintain consistent hole quality in serial production. Order the indexable drill directly via Metav Werkzeuge or request advice from the technical consultants if needed. Indexable drill — 21 mm diameter, 25 mm shank | Teknik Makina The Indexable drill is a robust insert drill body designed for precision holemaking in high-output machining applications 25 mm shank for robust clamping Compatible with SPMG 0602 inserts 63 mm effective cutting length Suits 21 mm nominal hole diameter Consistent hole quality through rigid clamping and repeatable geometry The design concentrates on mechanical stability: a 25 mm shank and a solid holder geometry reduce runout and support constant cutting conditions. With a 21 mm nominal cutting diameter and an effective 63 mm cutting length, the tool provides a balance between reach and rigidity that benefits batch production. Using an insert-based concept means that wear is localised to the cutting edge, which shortens downtime for regrinding and preserves the tool body for longer service life. This results in repeatable hole tolerances and fewer scrap parts during extended cycles. Fast insert changes and proven compatibility for efficient workflows Compatibility with widely available insert formats such as SPMG 0602 and manufacturers Taegutec and YG-1 makes stocking and replacement straightforward. The drill body’s overall length of 142 mm and modest mass (0.377 kg) contribute to safe handling and easy integration into tool magazines or manual tool changes. The modular approach reduces process complexity: worn inserts are exchanged quickly, restoring cutting performance without complex reconditioning. This approach delivers measurable time savings across multiple setups and supports leaner inventory management. Reliable sourcing and practical integration into production environments Specification transparency aids planning: the holder accepts SPMG 0602 inserts, the shank clamps at 25 mm, and the shank length is 56 mm, which helps with fixture selection and spindle interfacing. Supplied under the Teknik Makina designation and stocked by Metav Werkzeuge, the component benefits from a European distribution channel that acts as a quality filter for workshop supplies. The combination of proven insert standards and a sturdy tool body supports stable cycle times and facilitates predictable maintenance intervals for process engineers. For reliable insert drilling and expert sourcing, contact Metav Werkzeuge for tailored advice and direct delivery from Emmerich Technical data Article number: U821TM Manufacturer: Teknik Makina Core dimensions Diameter: 21 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.377 kg Compatibility & features Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 eClass: 21180201 FAQ Which inserts fit this drill body? The indexable drill accepts SPMG 0602 inserts; compatible manufacturers listed are Taegutec and YG-1, ensuring broad availability for replacement edges. What nominal hole diameter does the tool produce? The holder is specified for a 21 mm nominal cutting diameter and is designed to deliver consistent hole geometry at that size. How long is the cutting length and why does it matter? The 63 mm effective cutting length determines achievable depth and engagement; longer cutting lengths increase reach but require attention to rigidity to maintain hole tolerance. What are the key shank dimensions for spindle integration? Shank diameter is 25 mm with a shank/holder length of 56 mm, information that assists in selecting collets or shrink-fit holders for secure mounting. Is this tool suitable for series production environments? Yes, the tool body’s insert concept, proven insert compatibility and stable shank design make it well suited to repetitive production where rapid insert changes and predictable performance are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust drill body that combines precise guidance with economical insert use; the 25 mm shank ensures high rigidity and the 63 mm cutting length enables deeper, consistent holes. Order the indexable insert drill directly via Metav Werkzeuge or consult the team for application advice. Indexable Insert Drill U152TM – 21 mm diameter, WCM-0402 insert system by Teknik Makina Indexable Insert Drill U152TM is a modular drill body designed for efficient holemaking with replaceable inserts in industrial production and workshop environments Compatible with Korloy WCM-0402 inserts 21 mm cutting diameter for standard through-holes 25 mm shank for high rigidity 142 mm overall length for compact assembly Greater productivity through stable tool geometry The U152TM offers a 21 mm nominal cutting diameter combined with a 25 mm shank, which increases torsional stability under load and reduces chatter during interrupted cuts. A 63 mm cutting length provides substantial effective drilling depth while maintaining axial stiffness; this balance results in fewer rejects and steadier cycle times. For operations requiring predictable hole quality, the solid mounting and compact overall length translate into measurable cycle-time improvements and repeatable results across batches. Lower running costs via replaceable inserts Designed for insert-based drilling, the tool accepts WCM-0402 indexable inserts from Korloy, enabling fast carbide insert changes without regrinding the body. This modular approach reduces tooling inventory turnover and minimises downtime: broken or worn inserts are replaced in minutes rather than hours. The economic benefit is delivered through reduced per-hole tooling cost and simpler maintenance routines, making the component well suited to both short runs and serial production where tool-change efficiency matters. Easy integration and predictable handling in production cells With an overall length of 142 mm and a shank engagement length of 56 mm, the drill body fits standard toolholders while keeping the centre of mass close to the spindle. The measured weight of 0.376 kg aids dynamic balance and handling during tool changes and transport. As a purpose-built insert drill body, it is appropriate for workstations that prioritise quick changeover, consistent hole geometry and clear documentation—benefits that support quality assurance processes and reproducible machining results. Contact Metav Werkzeuge for detailed application recommendations and availability of the Teknik Makina indexable insert drill U152TM with WCM-0402 compatibility Technical data Article number: U152TM Manufacturer: Teknik Makina Product name: Indexable insert drill (U152TM) Core dimensions Cutting diameter: 21 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.376 kg Features & compatibility Compatible inserts: Korloy WCM-0402 Insert type: indexable inserts Application: insert-based drilling Suitable for workshop and industrial drill holders FAQ Which inserts fit this drill body? The drill body is compatible with Korloy WCM-0402 indexable inserts; replacement inserts may be sourced under that designation. What is the effective drilling depth? The tool provides a 63 mm cutting length, giving an effective drilling depth suitable for most through-hole and moderate-depth operations. What shank size is required for clamping? A 25 mm cylindrical shank is specified; a secure clamping length of 56 mm is advised for optimal stability. What is the nominal hole diameter produced? The nominal cutting diameter is 21 mm as specified in the core dimensions. What is the article number for ordering and documentation? The SKU for ordering and spare-part reference is U152TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust clamp reliability and precise shank dimensions provide consistent cutting performance; compatibility with Taegutec 3PKT 1004 inserts reduces inventory complexity and speeds changeovers. Order the S485TM shank cutter directly via Metav Werkzeuge or request advice from our consultants. S485TM shank cutter – indexable insert cutter for Taegutec 3PKT 1004, Ø21 mm S485TM is a solid shank cutter designed to accept 3PKT 1004 indexable inserts for demanding milling tasks in industrial and workshop environments. Compatible with Taegutec 3PKT 1004 inserts 21 mm cutter diameter, 20 mm shank Torx clamp M2.5x7 with T15 key Stable machining with a rigid shank for repeatable results The body is configured for indexable inserts, mounted on a rigid 20 mm shank to reduce deflection under load. With a nominal Ø21 mm cutter diameter and a 30 mm cutting length, the tool provides a stable cutting engagement that is beneficial for process consistency and extended cutter life. The result is improved part accuracy and less scrap, as tool behaviour is predictable and easily integrated into existing machining cycles. Fast insert changes and secure clamping to minimise downtime Insert retention is executed via a Torx clamp (M2.5x7) that is tightened with a T15 key, enabling quick and secure indexable insert replacement. Compatibility with Taegutec 3PKT 1004 inserts simplifies procurement and reduces set-up time on the shop floor. The clamping concept is designed so that insert exchanges are straightforward and repeatable, helping to keep machine downtime to an absolute minimum. Robust construction tailored to demanding milling operations The cutter has an overall length of 200 mm and a measured weight of 1.259 kg, reflecting a substantial build that supports dynamic stability when cutting. With two cutting edges the design balances cutting forces to reduce vibration and promote even wear across inserts. The combination of a substantial shank, dependable clamp geometry and standardised insert compatibility makes this tool well suited to workshop and production environments where reliability and easy servicing are priorities. The S485TM body is delivered ready for immediate integration into compatible tool holders. For reliable supply and technical guidance, contact Metav Werkzeuge in Emmerich — order the Teknik Cutting Tools S485TM shank cutter via Metav Werkzeuge and get assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S485TM Manufacturer: Teknik Makina Article: shank cutter for 3PKT 1004 indexable inserts Dimensions / measurable data Cutter diameter: 21 mm Shank diameter: 20 mm Cutting length: 30 mm Overall length: 200 mm Number of cutting edges: 2 Weight: 1.259 kg Features / compatibility Compatible with Taegutec 3PKT 1004 inserts Clamp screw: M2.5x7 (Torx) Torque key: T15 Indexable insert system FAQ Which inserts fit this cutter? The cutter is compatible with Taegutec 3PKT 1004 indexable inserts and is configured to accept that insert shape and size. What shank size is required for the tool holder? A 20 mm shank diameter is specified; the S485TM requires a tool holder or collet that accepts a 20 mm shank. How are the inserts secured? Inserts are clamped using a Torx screw M2.5x7, tightened with a T15 key for secure retention and quick replacement. For which machining tasks is this cutter intended? The tool is designed for demanding milling operations where a rigid shank and standardised indexable inserts provide process stability and reliable tool life. What are the key dimensions to check before ordering? Key dimensions: cutter Ø 21 mm, shank Ø 20 mm, cutting length 30 mm, overall length 200 mm, weight 1.259 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust indexable drilling in a compact body: the combination of a 21 mm cutting diameter, a 25 mm shank and a 42 mm cutting length gives reliable hole quality and stable clamping for series production; order the Teknik Makina indexable drill directly via Metav Werkzeuge or contact our consultants for application support. Teknik Makina U921TM indexable drill – 21 mm diameter · 25 mm shank The indexable drill U921TM is an insert-equipped drill body for medium-depth holemaking, designed to accept SPMG 0602 inserts and to integrate into standard toolholding systems for production and job-shop use 21 mm cutting diameter for medium holes 25 mm shank for rigid clamping Compatible with SPMG 0602 inserts 42 mm effective cutting length Suitable for Taegutec and YG-1 inserts Repeatable hole quality with stable clamping The U921TM drill body delivers consistent hole geometry through its substantial 25 mm shank and precise body design. The combination of a 21 mm cutting diameter and a 56 mm shank length reduces deflection under load, which helps to maintain concentricity and surface finish in serial drilling operations. For production planners this means fewer reworks and more predictable downstream processing; the technical design supports stable machine setups and efficient cycle times. Minimised downtime thanks to indexable inserts Equipped to accept SPMG 0602 inserts, the drilling system enables rapid insert changes and economical reconditioning of cutting edges. The use of standardised insert dimensions allows compatibility with established suppliers such as Taegutec and YG-1, simplifying stockkeeping and spare-part sourcing. By replacing worn inserts rather than entire tools, the drilling solution reduces tooling costs and shortens maintenance intervals, increasing overall equipment effectiveness in busy workshops. Easy integration into existing tooling kits With an overall length of 121 mm, a 42 mm cutting length and a compact mass of 0.338 kg, the tool body is designed for straightforward integration into common holders and adaptors. The clear dimensional data supports rapid verification against machine capacity and fixture geometry during process planning. The compact weight and standardised shank facilitate handling and secure clamping, making the system suitable for both single-machine cells and multi-spindle arrangements where predictable tool behaviour is required. Contact Metav Werkzeuge for tailored application advice and supply of the Teknik Makina U921TM indexable drill; our Emmerich technical team will assist with insert selection and delivery coordination Technical data SKU: U921TM Manufacturer: Teknik Makina Eclass: 21180201 Compatible inserts: SPMG 0602 Core data Diameter: 21 mm Overall length: 121 mm Cutting length: 42 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.338 kg Special features Compatible manufacturers: Taegutec, YG-1 Insert type: SPMG 0602 Indexable drill body design FAQ Which insert size does this drill accept? The drill accepts SPMG 0602 inserts; compatibility with Taegutec and YG-1 insert ranges is specified for the U921TM. What are the key dimensions that affect clamping and setup? Key dimensions are 21 mm cutting diameter, 25 mm shank diameter, 121 mm overall length and 42 mm cutting length. Is this tool suitable for quick insert replacement? Yes, the indexable drill body is designed for fast insert changes to minimise downtime and tooling costs. Which manufacturers’ inserts can be used as replacements? Insert replacements from Taegutec and YG-1 are compatible with this drill body. What advantages does an indexable drill body offer compared with solid drills? An indexable drill body allows economical replacement of cutting edges, shorter maintenance times and better inventory management through standardised inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable milling performance is achieved through the combination of a 21 mm diameter body and a shaft diameter of 20 mm, delivering stable clamping and consistent material removal; compatibility with WNMX 0603 indexable inserts ensures flexible tooling choices. Order the shank milling cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Teknik Makina Shank Milling Cutter S904TM – 21 mm diameter, for WNMX 0603 indexable inserts The Teknik Makina Shank Milling Cutter S904TM is a precision insert-mounted milling tool designed for robust material removal using WNMX 0603 indexable inserts, ideal for general machining and production setups. Compatible with WNMX 0603 indexable inserts Shaft Ø20 mm for robust clamping Cutting length 40 mm for deep cuts Two cutting edges with 90° cutting angle Stable clamping for consistent machining results A solid shaft diameter of 20 mm paired with a 21 mm diameter body reduces vibration and improves runout stability, which directly benefits surface finish and tool life. The tool’s two cutting edges are arranged for efficient chip removal and balanced cutting forces; this means fewer tool changes and more predictable cycle times in series production. For operations using indexable tooling, the arrangement translates into repeatable cuts and easier process parameter tuning, because insert geometry does much of the cutting work while the shank ensures positional stability. Fast insert changes and low downtime Designed for rapid serviceability, the cutter secures inserts with a Torx screw M2.5x5.5 driven by a T8 key, allowing quick replacement without specialised fixtures. The tool accepts WNMX 0603 inserts (Korloy-compatible), which are widely available and simplify inventory management. A cutting length of 40 mm and a 90° cutting angle enable reliable shoulder milling and face operations; the modular insert system reduces regrinding and dressing needs, improving overall workshop throughput and lowering lifecycle costs compared with solid-carbide equivalents. Built for everyday workshop reliability With an overall length of 150 mm and a weight of 0.379 kg, the cutter is balanced for both CNC and manual milling applications where rigidity and accessibility are important. The insert-based concept delivers versatility: different grades and coatings of WNMX 0603 inserts can be selected to match workpiece materials and surface finish requirements. This makes the tool a pragmatic choice for job shops and production lines seeking a combination of flexibility, predictable maintenance intervals and straightforward spare-part handling. For tailored advice on integrating the Teknik Makina shank milling cutter into production, contact Metav Werkzeuge for delivery and technical consultation: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S904TM Manufacturer: Teknik Makina Data Diameter: 21 mm Shaft diameter: 20 mm Cutting length: 40 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.379 kg Cutting angle: 90° Special features Compatible inserts: WNMX 0603 (Korloy compatible) Torx screw: M2.5x5.5 Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts WNMX 0603 indexable inserts; Korloy-compatible grades are commonly used for the S904TM to match specific material and finish requirements. How are the inserts secured? Inserts are tightened with a Torx screw M2.5x5.5 using a T8 key, enabling quick and secure clamping for routine insert changes. Is the cutter suitable for CNC machining? Yes, the tool’s 20 mm shaft diameter and balanced 150 mm overall length make it suitable for CNC milling as well as rigid manual setups where stable clamping is required. What cutting operations is this tool best for? With a 40 mm cutting length and a 90° cutting angle, the tool is well suited to shoulder milling, face milling and general-purpose material removal where insert tooling is preferred. How many cutting edges does it have and what is the benefit? The tool features two cutting edges, providing balanced cutting forces and good chip evacuation, which contributes to stable machining and predictable tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of precision, stable clamping and compatibility with indexable inserts to maintain consistent T-slot geometry in serial production; order or request advice from Metav Werkzeuge for delivery and technical clarification. T-slot cutter TKC177TM — 21 mm diameter, for RD-- 10 indexable inserts (Teknik Makina) The T-slot cutter TKC177TM is a purpose-built milling tool for machining T-slots with RD-- 10 indexable inserts, designed for production and workshop applications where repeatability and quick insert replacement are essential Compatible with RD-- 10 indexable inserts 21 mm cutting diameter 25 mm solid shank for stable clamping Two cutting edges for smooth chip evacuation Consistent T-slot geometry from a purpose-made cutter The TKC177TM is engineered to deliver repeatable T-slot profiles by coupling a defined 21 mm cutting diameter with a clearly specified 120 mm overall length. The use of RD-- 10 indexable inserts enables swift insert changes without regrinding, which reduces machine downtime. For shops transitioning from brazed or solid cutters, indexable inserts provide a predictable service life and simplified tool management. The result is fewer setup iterations and a more consistent slot form across batches. Stable clamping and reduced runout for accurate machining A 25 mm shank with a solid design improves concentricity when clamped in standard toolholders, helping to keep radial runout low during milling passes. Lower runout directly benefits surface finish and tolerances in T-slot shoulders. The cutter’s mass and geometry, combined with correct holder choice, support higher feed stability and make the tool suitable for repeatable production tasks where dimensional accuracy is required. Efficient cutting and chip control for reliable productivity Equipped with two cutting edges, the cutter balances cutting load and chip evacuation to avoid clogging in slot bottoms. The insert geometry and the number of flutes are chosen to provide a trade-off between surface finish and material removal rate, enabling steady performance in serial milling. Fast, clean chip flow reduces recutting of chips and the risk of edge damage to the insert, prolonging insert life and maintaining consistent machining quality. Practical integration, serviceability and workshop benefits Mechanical assembly and maintenance are straightforward: insert fastening uses a Torx T15 key with M3.5x8.5 Torx screws, allowing rapid insert replacement with basic workshop tools. The cutter’s 0.381 kg mass and standard shank dimensions make it compatible with common milling spindles and toolholders, simplifying inventory and tool change procedures. Clear labelling and the standardised insert system reduce training needs and speed up shifts between jobs. For reliable T-slot production with Teknik Makina quality, contact Metav Werkzeuge for stock status, application advice and delivery options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TKC177TM Label: 21mm T-Nut Fräser RD-- 10 L120mm Product type: T-slot cutter Manufacturer: Teknik Makina Facts Diameter: 21 mm Overall length: 120 mm Weight: 0.381 kg Shank diameter: 25 mm Cutting length (shaft): 30 mm Cutting edges: 2 Torx key: T15 Torx screw: M3,5x8,5 eClass: 21180605 Special features for RD-- 10 indexable inserts Quick insert replacement with Torx fastening Solid shank for reduced runout FAQ Which insert type fits this cutter? The cutter accepts RD-- 10 indexable inserts; the TKC177TM is specified for that insert family to ensure correct seat and cutting geometry. What clamping or holder is required? A standard milling holder accepting a 25 mm shank is suitable; the solid shank design of the TKC177TM supports stable clamping and low runout. How are inserts fastened and changed? Inserts are secured with M3.5x8.5 Torx screws and a T15 key, enabling rapid replacement using common workshop tools. Is the tool balanced for high-speed milling? The TKC177TM’s solid shank and two-flute configuration promote stable running; final balancing depends on the holder and spindle—select appropriate mounting practices for high-speed applications. What maintenance is recommended for long tool life? Regular inspection of seat faces, correct torque on Torx screws and replacing worn inserts keeps the cutter performing consistently; clean seating surfaces before reassembly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient T-slot production with replaceable CCMT 0602 indexable inserts, a cutting diameter of Ø21 mm and a compact shank Ø16 mm delivers consistent slot quality and low tool-change downtime — order the cutter directly via Metav Werkzeuge or consult our advisors for selection and delivery. T-slot cutter by Teknik Makina — Ø21 mm, for CCMT 0602 inserts The T-slot cutter is a precision milling tool designed to produce accurate T-slots and undercuts with indexable inserts, suitable for workshop and CNC applications where reliable slot geometry is required T-slot cutter for CCMT 0602 inserts Cutting diameter Ø21 mm for precise slots Shank Ø16 mm, overall length 100 mm Two cutting edges, 9 mm cutting height Faster slotting with repeatable geometry and fewer tool changes The cutter combines the economy of indexable inserts with stable cutter geometry to reduce cycle time and maintain repeatable slot dimensions. Fitted for CCMT 0602 inserts, the tool offers efficient chip removal while limiting downtime for insert changes. The two cutting edges and 9 mm cutting height support consistent results on repeated passes; this configuration is particularly effective where profile accuracy and process stability drive production throughput. The robust design minimises vibration and supports tight tolerances without sacrificing feed rates. Secure clamping and compact design for steady machining A shank Ø16 mm and an overall length of 100 mm provide a compact, rigid mounting that improves concentricity and reduces deflection during milling. The cutter’s reduced mass (0.151 kg) contributes to easier handling and faster tool changes at the machine, while the shank-cutting diameter of 11 mm and the 31.5 mm cutting shank length ensure reliable engagement with standard holders. Insert retention is provided via a Torx M2.5x3.5 screw operated with a T8 key, enabling quick, secure insert replacement and simple clamping torque control to maintain cutting stability across shifts. Practical compatibility, workshop support and supply reliability Marked as TKC098TM, this Teknik Makina tool is specified for compatible CCMT 0602 indexable inserts and is intended for precision T-slot machining in general workshop and CNC settings. The modular insert concept lowers consumable costs and simplifies inventory management compared with solid cutters. Combined with Metav’s decades of tooling experience and wide product range, procurement and technical advice are available for integration into production workflows. Metav’s established supply chain from Emmerich and a customer base of over 48,000 underline dependable delivery and consistent quality for industrial users. Contact Metav Werkzeuge for tailored advice on the Teknik Makina T-slot cutter TKC098TM and for rapid supply from Emmerich — our consultants will recommend the correct inserts and mounting options to fit the application Technical data Article number: TKC098TM Manufacturer: Teknik Makina Diameter: 21 mm Cutting edges: 2 Cutting height: 9 mm Overall length: 100 mm Shank diameter: 16 mm Shank cutting diameter: 11 mm Shank cutting length: 31.5 mm Weight: 0.151 kg Compatible inserts: CCMT 0602 Insert screw: Torx M2,5x3,5 Torx key: T8 Replaceable indexable inserts Designed for T-slot cutting applications FAQ Which inserts fit this cutter? The Teknik Makina T-slot cutter TKC098TM uses CCMT 0602 indexable inserts; these are the specified insert geometry for correct seat and clearance. What are the key dimensions to check for mounting? Relevant dimensions are the Ø21 mm cutting diameter, shank Ø16 mm and overall length 100 mm; confirm holder bore and clamping depth before mounting. How is the insert secured on the tool? Inserts are fastened with a Torx screw (M2.5x3.5) tightened using a T8 key to ensure secure clamping and repeatable seating. How many cutting edges does the tool have and what is the cutting height? The cutter has two cutting edges and a cutting height of 9 mm, configured for consistent slot depth across multiple passes. Is the cutter suitable for production use with indexable inserts? Yes, the TKC098TM is built for repeatable production slotting using replaceable CCMT 0602 inserts to reduce downtime and consumable costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of broad insert compatibility, a compact Ø21 mm cutting diameter and a secure 20 mm shank for consistent, high-precision thread milling; order the thread milling cutter directly via Metav Werkzeuge or consult our specialists if clarification is required. Thread milling cutter DC207TM — for S12, S14, S21, S30 and S40 indexable inserts; Ø21 mm, 20 mm shank — Teknik Makina A Thread milling cutter DC207TM engineered for versatile thread generation in CNC machining, compatible with a wide range of indexable inserts for flexible shop-floor use Compatible with S12–S40 indexable inserts 21 mm diameter for compact threading 20 mm shank for secure tool holding Minimise tooling stock while keeping capability flexible This cutter is built around broad insert compatibility, accepting S12, S14, S21, S30 and S40 indexable inserts, which reduces the need for multiple dedicated tools and simplifies inventory management. By using standard insert sizes, the tool enables cost-efficient regrinding or replacement and fast adaptation to different thread forms. The modular nature of the system supports uninterrupted production planning and contributes to a predictable parts flow, improving overall process economy without compromising machining versatility. Secure clamping and reliable insert retention for stable cycles A 20 mm shank provides a robust connection to standard tool holders, improving concentricity and reducing vibration during thread milling operations. Insert fixation is secured with an M4x10 Torx screw, tightened with a T15 key, ensuring consistent clamping force and straightforward maintenance procedures. These attributes support repeatable performance over long production runs, which is especially important for operations that prioritise dimensional consistency and surface finish. Compact diameter with practical handling for precise results With a Ø21 mm cutting head and a total length of 94 mm, the cutter balances rigidity and accessibility for restricted or multi-axis setups. The compact diameter helps maintain tool stiffness close to the cutting zone, reducing deflection when generating threads, while the overall length keeps overhang to a minimum. In practice, this design translates into improved precision and more predictable thread geometry, making the tool suitable for demanding manufacturing tasks where tolerances and surface integrity matter. Integration into workshop workflows and tool management The cutter's support for common insert formats and straightforward fastenings simplifies changeover and tool pre-setting. This eases logistic planning for maintenance teams and reduces spindle downtime during insert changes. The machining strategy benefits from the cutter's geometry when combined with appropriate CAM programming; the result is efficient chip control, repeatable thread profiles and predictable cycle times — all factors that support higher throughput and less rework on the shop floor. For reliable, high-precision thread milling with broad insert compatibility, request the Teknik Makina DC207TM via Metav Werkzeuge — technical advisors in Emmerich are ready to assist at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DC207TM Manufacturer: Teknik Makina Numbers / core technical data Diameter: 21 mm Overall length: 94 mm Shank diameter: 20 mm Torx screw: M4x10 Torx key: T15 Designs / special features For S12, S14, S21, S30 and S40 indexable inserts Compatible with standard tool holders requiring 20 mm shank Compact 94 mm overall length for reduced overhang Manufacturer: Teknik Cutting Tools; Teknik Makina product designation DC207TM FAQ Which insert sizes fit this cutter? The cutter accepts S12, S14, S21, S30 and S40 indexable inserts, allowing flexible selection of grades and geometries for different thread requirements. What is the shank diameter and why does it matter? The tool has a 20 mm shank; a larger shank diameter improves clamping stability and reduces deflection for more consistent thread profiles. How are the inserts secured? Inserts are fastened using an M4x10 Torx screw, tightened with a T15 key, providing straightforward and reliable insert retention. Is this cutter suitable for multi-axis CNC machines? The cutter’s compact Ø21 mm diameter and 94 mm overall length make it well suited to multi-axis setups where limited clearance and rigidity are considerations. Can the cutter be used for different thread forms? Yes — by selecting appropriate indexable inserts and CAM parameters, the cutter can generate a range of thread geometries while easing shop-floor tooling logistics. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, lightweight and compatible with 22 ER calipers, the U-plate provides a stable measurement reference while adding minimal mass to the setup; its modest weight and straightforward function support quicker, more repeatable checks. Order the U-plate directly via Metav Werkzeuge or ask our consultants if needed. U-plate — accessory plate for precision calipers, compatible with 22 ER (Teknik Makina) The U-plate is an accessory plate designed for workshop and inspection use with 22 ER precision calipers, enabling stable positioning when measuring recessed or narrow features. Compatible with 22 ER precision calipers Lightweight construction, approx. 0.1 kg Manufactured by Teknik Makina Stable reference for precise confined measurements A compact, U-shaped support plate that serves as a stable reference when working in confined or awkward measurement points. The design reduces lateral movement during contact measurements, which leads to improved precision and fewer repeated checks. For inspection routines where consistency is required, the accessory plate helps to standardise the measurement setup and supports reproducible results without adding significant handling effort. Simple integration and consistent repeatability Engineered for uncomplicated retrofitting to existing calipers, the accessory offers compatibility with the 22 ER mounting interface so that workshop technicians can integrate it into established workflows with minimal adjustment. The plate’s lightweight nature, approximately 0.1 kg, lowers the influence on instrument balance while still providing a secure seating for the caliper jaws. This combination of low mass and secure support contributes directly to improved repeatability in routine dimensional checks. Workshop-grade sourcing and traceable identification Produced by Teknik Makina and listed under SKU TA062TM, the accessory plate is traceable and straightforward to order for procurement departments seeking standardised measurement aids. As a dedicated accessory for precision calipers, the plate assists in speeding up setup time and reducing measurement-related rework, which supports more efficient shop-floor operations and a better allocation of inspection resources. For procurement advice or to source Teknik Makina accessories such as this U-plate, contact Metav Werkzeuge in Emmerich for personalised assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: TA062TM Manufacturer: Teknik Makina eCl@ss: 21189290 Facts Weight: 0.1 kg Special features Suitable for caliper: 22 ER Accessory type: U-plate Country of origin information: as provided by manufacturer FAQ What calipers is the U-plate compatible with? The accessory plate is compatible with 22 ER precision calipers and was specified to interface with that model family for stable measurements. How does the U-plate improve measurement reliability? By providing a stable reference and reducing lateral movement, the plate helps achieve more consistent contact positioning and thus more repeatable measurement results. What is the weight of the accessory plate? The U-plate weighs approximately 0.1 kg, which minimises added mass on the caliper while still offering secure support during inspection tasks. Who manufactures this accessory and how is it identified? The plate is produced by Teknik Makina and is listed under SKU TA062TM, allowing straightforward identification for ordering and stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise clamping, broad adjustability and simple insert replacement to streamline internal turning operations; order supply via Metav Werkzeuge or consult our technical team for tailored recommendations. Cartridge THB05TM — 22–32 mm for boring tool set (Teknik Makina) A Cartridge THB05TM designed for secure clamping in adjustable boring heads, intended for internal turning and finishing tasks in metalworking environments Adjustable 22–32 mm clamping range Accepts CCMT 09T3 indexable inserts Torx T15 key and M3.5×8.5 screw spec Robust cartridge for boring tool sets Consistent clamping for accurate bore results The cartridge is engineered to deliver repeatable concentricity across the 22–32 mm range, which reduces rework and improves process stability. Its compatibility with CCMT 09T3 indexable inserts ensures a familiar cutting geometry for many turning operations, while the adjustable clamping range permits one holder to replace several fixed shanks. For workshops seeking predictable cycle times and reduced set-up variance, this holder provides a solid technical basis for improved part quality. Maintenance and insert change made efficient Fast insert exchange is supported by a standard Torx T15 drive and an M3.5×8.5 retaining screw, allowing controlled removal and replacement of cutting tips without special tooling. The straightforward fastening arrangement helps shorten tool-change intervals and simplifies inventory of spare parts. Where downtime minimisation and clear maintenance procedures are priorities, the cartridge’s familiar hardware and indexed insert fit support reliable, low-complexity servicing. Clear technical benefits for process planning Using a single cartridge that covers 22–32 mm reduces the number of holders required and streamlines tooling lists, which benefits procurement and setup logistics. The acceptance of widely used CCMT 09T3 inserts means cutting data and edge preparations remain standardised across machines. For planners and operators, this translates into fewer tool variants, simpler tool presetting routines and more consistent finish quality on internal bores. Practical applications and workshop integration The unit is intended for integration into boring tool sets for internal turning, fine finishing and diameter adjustment tasks in conventional and CNC lathes. Its design supports flexible adaptation to differing bore sizes without the need for multiple dedicated holders, thereby saving bench space and lowering tooling complexity. In mixed-production environments where changeovers are frequent, the cartridge contributes to a leaner tooling system and helps maintain machining throughput. Contact Metav Werkzeuge for tailored supply and technical advice on the Teknik Makina cartridge THB05TM; call +49 2822 7131930 or email info@metav-werkzeuge.com for reliable delivery from Emmerich. Technical data Article number: THB05TM Manufacturer: Teknik Makina Description: Cartridge 22–32mm for boring tool set Facts Clamping range: 22–32 mm Torx key size: T15 Screw: M3.5×8.5 eCl@ss: 21041590 Special features For CCMT 09T3 indexable inserts Intended for boring tool sets SKU: THB05TM FAQ Which indexable inserts fit this cartridge? The cartridge THB05TM accepts CCMT 09T3 indexable inserts and is configured for the common CCMT insert geometry used in internal turning. What clamping range does the holder cover? The clamping range is 22–32 mm, enabling a single holder to accommodate a variety of internal diameters within that span. How is the insert secured and changed? Insert retention is via an M3.5×8.5 screw tightened with a Torx T15 driver; the cartridge THB05TM permits controlled replacement following standard workshop procedures. For which operations is this cartridge suitable? Designed for integration into boring tool sets, the cartridge is suitable for internal turning and finishing tasks where adaptable diameter control and repeatable clamping are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable drill body designed for dependable holemaking: compatibility with Taegutec SOMT 08T3 inserts and a 22.5 mm nominal diameter deliver reproducible results and reduced setup time; order the Vollbohrer directly via Metav Werkzeuge or ask our consultants if needed. Teknik Makina indexable-insert drill body (Vollbohrer) U319TM – 22.5 mm diameter, 66 mm cutting length The indexable-insert drill body Vollbohrer (U319TM) by Teknik Makina is engineered for stable, repeatable drilling in production environments where insert interchangeability and process reliability matter Compatible with Taegutec SOMT 08T3 inserts 22.5 mm nominal diameter for precision holes 66 mm cutting length for deep drilling 25 mm round shank, secure clamping Consistent hole quality for series production The indexable-insert design ensures consistent hole geometry across long runs by allowing quick replacement of worn cutting tips. With a 22.5 mm nominal diameter and a 66 mm cutting length, the tool provides the controlled engagement needed for accurate depths without frequent regrinding. This stability translates into fewer rejects and a smoother workflow for repetitive drilling tasks in CNC cells. Faster maintenance and lower lifecycle costs Because the cutting edges are supplied as replaceable inserts, tool maintenance is simplified and downtime is reduced. The compatibility with Taegutec SOMT 08T3 inserts means standardised spare parts and rapid replacement. The modular concept reduces per-hole operating cost and supports predictable maintenance intervals, which benefits throughput and planning in production and maintenance schedules. Secure clamping for minimal runout and vibration A 25 mm round shank and a substantial overall length of 144 mm deliver the rigidity required to reduce runout and vibration in drilled holes. The robust shank profile is selected to provide reliable clamping in conventional chucks or suitable adaptors, improving surface finish and extending insert life by stabilising the cutting conditions during each pass. Clear compatibility and application scope The tool is supplied as an indexable-insert drill body suited to conventional drilling machines and CNC spindles where insert changeability is preferred to regrinding. With the model designated U319TM, the combination of insert compatibility, measurable cutting length and standard shank size enables integration into existing tool sets without complex requalification, making it a pragmatic choice for workshops and production lines. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools indexable-insert drill body U319TM into production; order from our Emmerich stock or request application guidance by email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: U319TM Manufacturer: Teknik Makina Facts Diameter: 22.5 mm Overall length: 144 mm Cutting length: 66 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.375 kg Special features Compatible inserts: Taegutec Insert type: SOMT 08T3 Product type: Vollbohrer (indexable-insert drill body) SKU: U319TM FAQ Which inserts fit this drill body? The drill body accepts Taegutec SOMT 08T3 indexable inserts; the U319TM is designed for that insert format to ensure correct seating and cutting geometry. How deep can holes be drilled with this tool? Effective cutting depth is determined by the 66 mm cutting length; the overall length of 144 mm gives additional clearance for clamping and tool overhang. What clamping size is required for the shank? The tool has a 25 mm round shank and requires a corresponding chuck or adaptor that securely holds a 25 mm diameter shank. Is this design suitable for production runs? Yes; the indexable design and standard insert format are intended for series production where fast insert changes and predictable performance are priorities. Are the cutting edges replaced or re-sharpened? Cutting edges are supplied as indexable inserts (SOMT 08T3) and are replaced rather than re-sharpened, simplifying maintenance and reducing downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable holemaking with modular insert replacement and stable clamping. The 22.5 mm cutting body, 66 mm cutting length and 25 mm shank combine for consistent machining results — order the tool via Metav Werkzeuge or contact our consultants for technical advice. U155TM — Teknik Makina indexable drill body, 22.5 mm, 25 mm shank The U155TM is an indexable drill body engineered for efficient holemaking on CNC machines where quick insert changes and steady clamping matter 22.5 mm drill diameter for medium holes 25 mm shank for robust clamping Compatible with Korloy WCM-0402 inserts 66 mm cutting length for deeper holes Balanced body for vibration reduction Stable clamping for consistent hole quality The indexable drill body delivers stable clamping thanks to its 25 mm shank and compact overall length of 145 mm, reducing runout and improving repeatability across batches. A stiffer connection between spindle and tool minimises vibration, which directly supports more homogeneous hole geometry and longer tool life. This mechanical stability translates into fewer rejects and less rework, supporting production targets and cost-efficiency without relying on assumed material compatibility. Quick insert changes to reduce downtime Designed to accept WCM-0402 inserts from Korloy, the drilling system enables rapid insert replacement and minimises setup time. The insert seat geometry and accessible screw position allow technicians to change cutting edges without complex realignment, so maintenance becomes a short, predictable process. The modular approach separates cutting-edge wear from the drill body, which lowers lifecycle costs and simplifies spare-part management in a workshop environment. Dimensions and geometry optimised for machining stability Key dimensions such as 66 mm cutting length and 22.5 mm diameter are balanced to provide adequate chip evacuation while maintaining rigidity in the cutting zone. The 56 mm shank length supports correct clamping depth in common toolholders, and the moderate overall length reduces cantilever effects. These measurable properties assist in selecting appropriate feeds and speeds and contribute directly to process reliability on vertical and horizontal machining centres. Practical application guidance and safe handling The tool is supplied as a prepared drilling body that accepts indexable inserts; correct torque on the insert screw and periodic inspection of the insert seat ensure repeatable results. While the body itself is robust, service routines that include cleaning chip pockets and checking seat faces will extend life and preserve hole quality. For specification matching and holder selection, consult Metav Werkzeuge for guidance tailored to individual machine and process constraints. For personalised technical advice or to arrange supply of the Teknik Cutting Tools U155TM from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholder compatibility and delivery options Technical data Article number: U155TM Product: Indexable drill body Manufacturer: Teknik Makina Core data Diameter: 22.5 mm Overall length: 145 mm Cutting length: 66 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.394 kg Special features Insert type: WCM-0402 Compatible inserts: Korloy SKU: U155TM FAQ What insert type does this drill accept? The indexable drill body accepts WCM-0402 inserts; compatibility is confirmed with Korloy WCM-0402 specifications for the U155TM. What are the key dimensions to check for holder selection? Check the 25 mm shank diameter, 56 mm shank length and the 145 mm overall length when matching the U155TM to a toolholder or adaptor. How deep can this drill cut effectively? The tool has a 66 mm cutting length, which indicates the maximum effective engaged length for holemaking without compromising stability for the U155TM drilling system. Is the drill suitable for high-speed machining? The design of the U155TM supports stable clamping and insert changes; consult Metav Werkzeuge to confirm cutting parameters for specific high-speed applications and machine capability. What maintenance is recommended for long service life? Periodic cleaning of chip pockets, inspection of insert seats and correct screw torque during insert changes are recommended to maintain performance of the U155TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

There is inconsistent product information for this item: the designation provided indicates a solid drill, while the technical entries list compatibility with indexable inserts (example: SPMG 07T3) and name insert manufacturers Taegutec and YG-1. These two data sets imply different product concepts and cannot both be correct without further clarification. Available measurable data included with the entry are: diameter 22.5 mm, cutting length 66 mm, shank diameter 25 mm, shank length 56 mm, overall length 145 mm and weight 0.375 kg. If the tool is a genuine solid drill, details about compatible indexable inserts and insert manufacturers appear erroneous; if it is an indexable (insert) drill, the designation as a solid drill is incorrect. Please verify the correct product type and associated specifications before proceeding with publication or procurement. For assistance in resolving this discrepancy, technical clarification can be obtained from the supplier or from Metav Werkzeuge at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the secure M16 thread, the 220 mm overall length and the robust 32 mm shaft to extend machining reach without compromising rigidity — order or request a compatibility check via Metav Werkzeuge for reliable supply and advice. Extension for screw-in cutters — Teknik Makina, M16 thread, 220 mm Extension for screw-in cutters extends the reach of screw-in milling cutters and is designed for deep-pocket and heavy-duty milling operations where a robust, vibration-resistant extension is required M16 threaded connection for secure fastening 220 mm overall length for extended reach 32 mm shaft diameter for rigid clamping Fits cutters with a 28.7 mm screw-in opening Secure connection for consistent machining performance The extension adapter is engineered to prioritise a precise, stable connection between machine spindle and cutter. The M16 thread ensures a positive, repeatable joint that reduces the risk of loosening under load, while the substantial 32 mm shaft diameter increases torsional stiffness and helps maintain concentricity. For production environments where dimensional consistency matters, this solution reduces runout and supports predictable cutting forces, resulting in improved surface quality and longer tool life. Extended reach without sacrificing stiffness With an overall length of 220 mm, the shaft extension enables access to recessed features and deeper cavities that standard holders cannot reach. The design balances reach and rigidity: the 40 mm cone engagement provides axial support at the cutter end, and the adapter’s mass (approx. 1.33 kg) helps dampen vibration during intermittent cuts. This combination is particularly valuable in setups where tool overhang is unavoidable but component tolerances remain tight, allowing productivity gains without compromising part accuracy. Straightforward integration and workshop reliability Installation follows conventional screw-in cutter practice and the adapter mates to cutters with a 28.7 mm opening, reducing the need for bespoke fixtures. Constructed to industrial standards, the component is suitable for robust daily use and compatible with standard milling toolchains. Information on dimensions and thread form supports seamless specification in procurement and maintenance documentation, and the adapter’s clear mechanical parameters facilitate planning for balance, clamping torque and spindle load. For technical compatibility checks, availability and order processing, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930; Metav’s specialists will advise on fitment and lead times and help place the order. Technical data Article number: VT522TM Manufacturer: Teknik Makina ECLASS: 21189208 ETIM: EC002219 Dimensions / core technical data Shaft diameter: 32 mm Screw-in cutter opening: 28.7 mm Cone length (engagement): 40 mm Overall length: 220 mm Weight: 1.33 kg Special features / design Thread: M16 Application: extension for screw-in cutters Robust shaft for reduced runout Designed for heavy-duty milling reach FAQ What cutters are compatible with the extension adapter? The extension adapter is compatible with screw-in cutters that have an opening of 28.7 mm and a matching screw-in interface; check the cutter seat dimensions before selection. How does the M16 thread improve stability? An M16 threaded connection provides a positive mechanical joint that maintains clamping force under cutting loads, reducing micro-movement and improving machining accuracy. Is the adapter suitable for high-speed milling? The adapter is intended for heavy-duty reach applications; consult spindle speed and balance specifications to confirm suitability for specific high-speed operations. What measures reduce vibration when using a long extension? Use the shortest possible effective overhang, ensure correct balancing, and verify clamping torque; the adapter’s 32 mm shaft diameter and cone engagement help damp vibrations. Can the extension be used with tapered toolholders? This extension is designed for screw-in cutter systems; compatibility with tapered toolholders depends on the specific interface and must be verified against holder and cutter specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine extended reach with a robust M16 connection and a stable Ø 32 mm shank to keep milling processes uninterrupted; benefit from the enhanced fit for screw-in cutters and order via Metav Werkzeuge or consult our specialists for specification support. Extension for screw-in cutters VT523TM — arbor extension with M16 thread and Ø 32 mm shank (Teknik Makina) The Extension for screw-in cutters VT523TM provides increased reach and a secure connection for workshop and CNC milling operations, designed to accept standard screw-in cutters and to be used where an extended tool projection is required. M16 thread for secure clamping Shank Ø 32 mm for stable interface 220 mm overall length for extended reach 28.7 mm opening for screw-in cutter fit Greater reach with maintained rigidity An extended tool projection is achieved with a 220 mm overall length while rigidity is preserved by the Ø 32 mm shank, which reduces deflection under load and maintains concentricity during milling. This combination enables fewer tool changes on complex components and supports longer-reach operations without compromising finish quality. The design is intended for industrial workshop settings and is suitable where a dependable arbor extension is required for screw-in tooling. Reliable connection and proven cutter compatibility The mechanical interface is defined by the M16 thread and a precision opening of 28.7 mm, together with a 40 mm taper that ensures the screw-in cutter seats securely. These features allow the cutter to be clamped with minimal play, which is essential for repeatable results in serial production. The VT523TM is therefore well suited to accept commonly used screw-in cutters and to integrate with existing arbor systems; the secure thread connection supports consistent machining performance. Built for workshop continuity and easy handling Weighing 1.324 kg, this extension balances solidity and manageable handling for tool set-up and changeover. The component is manufactured for professional use and is intended to reduce downtime by offering a standardised interface that simplifies tool matching. Where tool path length or accessibility is a constraint, the extension provides a practical solution that keeps processes efficient and supports reliable throughput in daily production environments. For technical selection or to secure supply of the Teknik Makina extension with an M16 connection, contact Metav Werkzeuge for personalised advice and assured delivery from Emmerich. Technical data Article number: VT523TM Manufacturer: Teknik Makina Product: Extension for screw-in cutters Weight: 1.324 kg ECLASS: 21189208 ETIM: EC002219 Facts Overall length: 220 mm Shank diameter: Ø 32 mm Screw-in cutter opening: 28.7 mm Taper length (screw-in cutter): 40 mm Thread: M16 Weight: 1.324 kg Special features Suitable for screw-in cutters Designed for extended reach applications Stable shank for secure clamping Manufacturer SKU: VT523TM FAQ Which machines are compatible with this extension? The extension is compatible with machines that accept standard screw-in cutters and arbors featuring an M16 thread; the Extension for screw-in cutters VT523TM by Teknik Makina is dimensioned for systems that accommodate a shank of Ø 32 mm. How is the cutter secured in the extension? The cutter is secured by the M16 thread and seated against the 40 mm taper, with a 28.7 mm opening that ensures correct positioning and clamping for the Extension for screw-in cutters VT523TM. Will using the extension affect machining accuracy? Extending the tool projection necessarily influences stiffness, but the Ø 32 mm shank and secure thread interface of VT523TM are designed to minimise deflection and preserve repeatability in standard workshop tasks. What are the overall length and weight of the extension? The component has an overall length of 220 mm and a weight of 1.324 kg, as specified for the Extension for screw-in cutters VT523TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust Ø33 mm diameter, a long 132 mm cutting length and secure 32 mm shank to maintain stable, high‑productivity drilling cycles. Order the indexable drill directly via Metav Werkzeuge or ask the Metav consultants for application guidance. Indexable drill U733TM by Teknik Makina — Ø33 mm, 132 mm cutting length The Indexable drill U733TM is a purpose‑built insert drill for efficient holemaking in metalworking and CNC machining, designed for secure clamping and fast insert changes. Ø33 mm diameter for precision holes 132 mm cutting length for deep cuts 32 mm shank for rigid toolholding Compatible with SPMG 0904 inserts (Taegutec, YG‑1) Stable deep‑hole performance with long cutting reach With a cutting length of 132 mm, this insert drill is designed for deeper holemaking without compromising stability. The extended cutting flute reduces the need for multiple operations, enabling a single‑pass approach for many medium‑depth bores. The result is shorter cycle times and fewer tool changes, which supports higher metal removal rates and more predictable production scheduling for machining centres and toolrooms. Fast insert management and consistent results Compatibility with SPMG 0904 indexable inserts from leading suppliers such as Taegutec and YG‑1 simplifies logistics and reduces downtime. Standardised insert clamping ensures that edge geometry and chipbreaking behaviour remain consistent across batches, supporting repeatable hole quality. For operations that value predictable tool life and rapid exchange, this feature delivers clear operational advantages. Rigidity and secure clamping for improved accuracy The tool’s 32 mm shank and overall length of 225 mm provide a balance between reach and stiffness. A rigid toolholder interface reduces vibration and runout, which helps maintain hole tolerances and surface finish. The design minimises off‑centre deflection during entry and exit, so holes are closer to nominal diameter and require less rework, improving first‑pass yield. Designed for workshop integration and productivity gains Weighing 1.05 kg and engineered for reliable mounting, the drill is suitable for CNC lathes and milling machines that accept a 32 mm shank interface. Its compatibility with widely available inserts supports flexible stocking strategies and cost‑effective tooling management. The tool’s characteristics support lean production by reducing setup complexity and enabling faster throughput without sacrificing hole quality. For robust, production‑oriented drilling with Teknik Makina tools, contact Metav Werkzeuge in Emmerich for tailored advice, reliable supply and order handling — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U733TM Manufacturer: Teknik Makina Core measurements Diameter: 33 mm Cutting length: 132 mm Overall length: 225 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.05 kg Features Compatible with SPMG 0904 inserts Compatible insert suppliers: Taegutec, YG‑1 Insert type: indexable for rapid replacement Purpose: metalworking / CNC holemaking FAQ Which insert type is required for this drill? The indexable drill U733TM uses SPMG 0904 inserts; compatible inserts from Taegutec and YG‑1 are suitable. What machine interfaces suit the tool? The tool is intended for machines accepting a 32 mm shank, offering rigid clamping for CNC machining centres and driven toolholders. Is the drill suitable for deep hole machining? Yes, the 132 mm cutting length supports medium to deep holemaking in a single pass for many applications. How does the tool support production efficiency? Standardised inserts and a robust shank reduce changeover time and vibration, improving first‑pass quality and throughput with the U733TM. Can the U733TM be used with third‑party inserts? SPMG 0904 is an industry standard; inserts from approved suppliers such as Taegutec and YG‑1 are compatible and recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust indexable insert technology, precise dimensional control and easy insert availability for uninterrupted production. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Vollbohrer U782TM — Indexable insert drill, 22 mm diameter, 25 mm shank (Teknik Makina) The Vollbohrer U782TM is an indexable insert drill engineered for accurate holemaking in CNC machining, offering straightforward insert replacement and consistent performance for production and repair work 22 mm cutting diameter, 110 mm cutting length 25 mm shank for stable clamping Compatible with Korloy WCm-0402 inserts Total length 190 mm for extended reach Stable geometry for repeatable hole quality The U782TM combines a true-to-size 22 mm diameter with a substantial 110 mm cutting length to enable consistent hole depths without frequent re‑positioning. A 25 mm shank provides a secure interface with common toolholders, reducing runout and vibration. Using indexable inserts cuts changeover time and maintenance effort: worn edges are replaced quickly instead of regrinding, which maintains tight tolerances and improves repeatability across series production. Designed for efficient spindle time and tool handling A 56 mm shank engagement length supports reliable clamping and reduces the risk of micro‑movement under cutting forces, while the 190 mm overall length allows access to deeper features without auxiliary extensions. The insert pocket accepts WCm-0402 inserts, a widely stocked standard from Korloy, helping to keep tool supply costs predictable and downtime to a minimum. The tool’s geometry favours quick index cycles and predictable chip control, translating into measurable productivity gains on the shop floor. Practical integration into workshop processes This insert drill is targeted at CNC workshops and job shops requiring dependable holemaking with fast serviceability. The modular insert system simplifies inventory: a single spare pack of WCm-0402 inserts serves multiple tools, lowering stocking complexity. Where operators need guidance on clamping or insert selection, the drill’s dimensions and insert type allow clear specification for holders and inserts, making set‑up and changeover straightforward and audit‑friendly. Contact Metav Werkzeuge for tailored tooling advice on the Teknik Makina indexable insert drill U782TM and to arrange specification checks or delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: U782TM Manufacturer: Teknik Makina Designation: Vollbohrer Compatible inserts manufacturer: Korloy Compatible inserts: WCm-0402 Facts Diameter: 22 mm Cutting length: 110 mm Shank diameter: 25 mm Shank engagement length: 56 mm Total length: 190 mm Weight: 0.47 kg Special features Indexable insert drill Insert system: WCm-0402 Korloy-compatible inserts FAQ Which insert type does this drill use? The drill is set up for WCm-0402 indexable inserts; Korloy inserts with that designation fit the seat. What are the principal dimensions to check for toolholder compatibility? Key dimensions are 22 mm diameter, 25 mm shank and 56 mm engagement length; confirm the holder accepts a 25 mm shank. Can this drill reach deep bores? With a total length of 190 mm and a cutting length of 110 mm, the tool is suitable for deeper holemaking within its specified cutting length. How does the insert system affect maintenance? Indexable inserts reduce downtime: worn inserts are simply replaced, avoiding regrinding and preserving consistent hole tolerances. Is the drill appropriate for CNC production runs? Yes — the combination of a secure 25 mm shank interface, standard WCm-0402 inserts and predictable geometry supports efficient series production and rapid changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from 22 mm cutter diameter and internal coolant for improved chip control and longer insert life; combine cost-effective indexable tooling with straightforward integration. Order directly via Metav Werkzeuge or consult our specialists for application advice. Shank cutter S168-1TM for APKT 1003 indexable inserts — 22 mm, internal coolant (Teknik Makina) Shank cutter S168-1TM is a compact indexable milling body designed for reliable machining with APKT 1003 inserts, offering efficient chip evacuation and straightforward mounting for production and repair workshops. 22 mm cutter diameter for compact machining Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts 20 mm shank for standard holder interfaces Optimised machining performance for reliable cycle times The 22 mm tool body combines a compact profile with three cutting edges, enabling steady material removal while keeping runout and vibration low. Fitted with APKT 1003 indexable inserts, the design reduces per-part tooling cost because only the inserts are replaced when worn. The integrated internal coolant directs cutting fluid to the insert seat, improving cooling and chip clearance; this helps maintain consistent cutting forces and supports predictable cycle times in batch or jobbing environments. Seamless integration with common toolholders and insert systems With a 20 mm shank and an overall length of 120 mm, the cutter aligns with standard holder interfaces and provides a 40 mm cutting length for accessible engagement depths. The clamping system uses a Torx screw (M2.5x5.5) tightened with a T8 key for repeatable, secure insert seating. Compatibility with Korloy APKT 1003 inserts ensures easy sourcing of cutting tips and interchangeability across existing indexable milling setups. Reduced downtime through simple maintenance and sturdy construction The tool body’s compact mass (approx. 0.291 kg) and internal coolant capability support thermal stability and efficient chip evacuation during prolonged operations. Fewer complete-tool changes are needed because insert replacement is fast and requires only basic tools. This contributes to cleaner changeovers at the machine and a lower total cost of ownership for shops that rely on indexable tooling for mixed batch sizes. Discuss specific machining parameters and delivery options with Metav Werkzeuge to ensure the S168-1TM cutter meets the application requirements; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid dispatch from Emmerich Technical data Article number: S168-1TM Manufacturer: Teknik Makina Product type: Shank cutter Label: 22mm Schaftfräser APKT 1003 L120mm mit Innenkühlung Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Internal coolant: yes Core technical dimensions Cutter diameter: 22 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length (shank): 40 mm Number of cutting edges: 3 Weight: 0.291 kg Torx key size: T8 Torx screw: M2.5x5.5 Materials & features Indexable insert system (APKT 1003) Internal coolant channel Standardised 20 mm shank for common holders Torx clamping system for secure insert fixation FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; Korloy-manufactured APKT 1003 inserts are explicitly compatible with the S168-1TM tool body. Does the tool provide coolant through the body? Yes, the S168-1TM features internal coolant to support chip evacuation and cooling at the insert tip. What shank size and overall length does the cutter have? The tool has a 20 mm shank and an overall length of 120 mm, with a 40 mm cutting length. Which fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M2.5x5.5, tightened with a T8 Torx key for consistent and secure seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from high rigidity and fast indexable-insert changes thanks to the 20 mm shank and compatibility with LNMX 1006 inserts; the 22 mm cutting diameter together with two cutting edges and a 90° cutting angle delivers stable, repeatable machining. Order the tool directly via Metav Werkzeuge or contact our consultants for application-specific advice. Teknik Makina — Shank milling cutter for LNMX indexable inserts, 22 mm diameter The Shank milling cutter for LNMX indexable inserts is a compact, insert-based milling solution for general finishing and light-roughing tasks in production environments. 22 mm cutting diameter 20 mm shank diameter Two cutting edges, 90° cutting angle For LNMX 1006 indexable inserts Achieve consistent cycle times with insert-based milling This insert-holder cutter is engineered to deliver predictable results in repetitive machining tasks. The combination of a 22 mm cutting diameter and a 90° cutting angle produces a controlled cutting force vector, which reduces vibration and improves surface finish compared with less rigid geometries. Using LNMX 1006 indexable inserts means that tool life management becomes a matter of replacing small, economical inserts rather than the whole cutter, lowering per-part costs and simplifying inventory. The tool’s balanced geometry and two cutting edges help maintain productivity during short runs and frequent changeovers, making it suitable for workshops and small-series production where setup time influences overall throughput. Fast insert replacement and secure clamping to reduce downtime Designed for quick maintenance, the cutter uses a Torx M3x7 fastening screw tightened with a T8 key for secure clamp performance. The straightforward clamping concept shortens tool-change intervals and minimises potential alignment errors during reassembly. The 20 mm shank contributes to stable toolholding in standard holders, enhancing concentricity and repeatability across shifts. Compatibility with established insert makers such as Korloy widens procurement options and allows standardised stock across multiple machines. At a weight of 0.263 kg, the tool is easy to handle during changeovers while retaining sufficient mass to dampen chatter on compatible spindles. Sourcing confidence and workshop support for dependable results Built by Teknik Makina and listed as LN097TM, this shank-mounted cutter provides a practical balance of performance and workshop convenience. Sourcing through Metav Werkzeuge brings additional benefits: a transparent supply chain from Emmerich, access to thousands of related tooling items, and expert advice for matching insert grades and coatings to the intended material. For operations seeking to reduce supplier complexity while keeping high precision, the combination of a standardised insert system and a robust shank interface supports predictable process performance and lower total cost of ownership. The tool’s straightforward specification encourages consistent setup practices across operators, contributing to quality assurance and repeatable parts. For procurement or technical specification support regarding the Teknik Makina shank milling cutter (LN097TM), contact Metav Werkzeuge for tailored supply options and compatibility guidance Technical data SKU: LN097TM Manufacturer: Teknik Makina Article name: Shank milling cutter for LNMX indexable inserts Eclass: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 22 mm Shank diameter: 20 mm Number of cutting edges: 2 Overall length: 100 mm Weight: 0.263 kg Cutting angle: 90° Features and compatibility Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Fastening screw: Torx M3x7 Torx key size: T8 Files: migration IDs available FAQ Which inserts fit this cutter? The cutter accepts LNMX 1006 indexable inserts; insert compatibility includes standard LNMX geometries from suppliers such as Korloy and other manufacturers listed in the tool specifications. What key and screw are required for insert changes? Insert retention uses a Torx M3x7 screw; a T8 Torx key is needed for secure tightening and rapid replacement. Is the shank suitable for collet holders or hydraulic chucks? The 20 mm shank is appropriate for standard 20 mm holders and chucks; selection of the correct clamping system is important to achieve optimum concentricity and damping. Can this cutter be used for roughing operations? The tool is optimised for light roughing and finishing where indexable inserts like LNMX 1006 provide flexibility; heavy roughing may require a different geometry or larger-diameter cutter. What is the article number for ordering? The article is listed as LN097TM and supplied by Teknik Makina through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com