Gibt es einen Hahn und Kolb Online Shop?

The combination of a 20 mm shank and 180 mm overall length delivers consistent rigidity and reach for precise parting and grooving. Benefit from standardised compatibility with 3C indexable inserts and the S20Q shank designation for straightforward integration on conventional toolposts. Order the parting tool holder directly via Metav Werkzeuge or ask the consultants if needed. Parting Tool Holder K646TM — 20 mm shank, 180 mm overall length (Teknik Makina) A compact and rigid parting tool holder K646TM intended for precision grooving and cut‑off operations on CNC lathes, optimised for indexable insert use 20 mm shank diameter for rigid clamping 180 mm overall length for deep reach Compatible with 3C indexable inserts Cutting width 3 mm, cutting height 40 mm Superior rigidity for accurate cut-off operations The holder's 20 mm shank and balanced mass mean reduced vibration and repeatable positioning at the toolpost, which improves surface finish and extends insert life. With an overall length of 180 mm, the design offers secure access for deeper parting tasks while maintaining stability. The moderate weight of 0.459 kg keeps the toolholder easy to handle during set-up yet substantial enough to avoid chatter under typical turning loads. These measurable characteristics translate directly into fewer rejected parts and a steadier production flow. Fast changeover through standardised insert and shank fittings Compatibility with 3C indexable inserts and the holder designation 3C‑R S224 enables rapid insert replacement and predictable cutting geometry. The cutting width 3 mm in combination with a cutting height of 40 mm provides a clear specification for selecting inserts and calculating tool offsets in CAM programs. The S20Q shank designation aligns the toolholder with established shank standards, simplifying inventory management and reducing setup times across different machines. Designed for reliable workshop integration and consistent results The toolholder's standard dimensions and clear technical data support straightforward programming of offsets and predictable tool life, which benefits batch production and repetitive operations. The device's compatibility with indexable inserts reduces tooling costs by allowing frequent insert changes without replacing the holder body. As a result, the holder supports efficient maintenance cycles and limits downtime while preserving machining quality. For demanding parting and grooving applications, request the Teknik Makina K646TM from Metav Werkzeuge — Metav’s specialists in Emmerich can advise on suitability and supply directly via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K646TM Manufacturer: Teknik Makina Designation: Parting tool holder (Stechklemmhalter) Facts Shank diameter: 20 mm Overall length: 180 mm Cutting height: 40 mm Cutting width: 3 mm Diameter: 26 mm Weight: 0.459 kg Special features Compatible with insert type: 3C Shank designation: S20Q Holder designation: 3C‑R S224 Suitable for indexable inserts FAQ Which insert type fits this holder? The K646TM accepts 3C indexable inserts, matching the specified insert family for predictable cutting geometry. What shank size is required for clamping? The holder uses a 20 mm shank (S20Q), suitable for standard toolpost clamping systems. What is the overall length and how does it affect reach? With an overall length of 180 mm, the toolholder provides extended reach for deeper parting while maintaining rigidity. What cutting dimensions are available from the holder? The K646TM is specified for a cutting width of 3 mm and a cutting height of 40 mm, which guides insert selection and tool offset programming. Who manufactures the toolholder and who is responsible for supply? The K646TM is manufactured by Teknik Makina; supply and responsibility are handled by Metav Werkzeuge for distribution in Europe. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a combination of precise clamping and compact dimensions: the holder’s 20 mm shank and 3 mm cutting width deliver stable grooving with reduced vibration, while the 180 mm overall length provides reach for deeper operations. Order directly via Metav Werkzeuge or consult our specialists for application advice. Stechklemmhalter (Grooving Clamp Holder) – 20 mm Shank, 3 mm Cut Width by Teknik Makina The Stechklemmhalter is a grooving clamp holder designed for lathe and CNC grooving operations, compatible with Korloy 3C MGM indexable inserts and engineered for rigid toolholding with a 20 mm shank and 180 mm overall length 20 mm shank for rigid toolholding 3 mm cutting width for narrow grooves Compatible with Korloy 3C MGM inserts 180 mm overall length for extended reach Stable clamping for consistent groove quality The holder’s 20 mm shank and compact mass deliver rigid clamping, which significantly reduces chatter and vibration during grooving operations. This mechanical stability translates into a more consistent surface finish and extended life for indexable inserts. With a net weight of 0.45 kg, the assembly balances stiffness and manageable tool inertia, helping to maintain repeatable results across production batches. Designed for narrow grooving and reliable insert compatibility The tool is specified for a 3 mm cutting width and a 35 mm cutting height, dimensions that make it suitable for precise narrow-groove and parting tasks. It accepts 3C MGM indexable inserts and matches the ISO boring-bar designation S20Q 3C-R, ensuring straightforward integration with established insert systems. For workshops unfamiliar with insert codes: the stated cutting width defines the groove width produced, while the cutting height indicates the maximum protrusion the holder accommodates for the insert geometry. Workshop efficiency through compact reach and simple integration With an 180 mm overall length and a nominal outer diameter of 26 mm, the holder provides the reach required for deeper approaches without sacrificing rigidity at the toolpost. The MGM clamping type offers dependable retention of the cutting insert, and the straightforward shank size minimises the need for adapter tooling on machines prepared for a 20 mm holder. This design supports fast set-ups and stable machining cycles, which contributes to predictable throughput and less unplanned downtime. For robust grooving performance, request supply and technical guidance for the Teknik Makina Stechklemmhalter from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for detailed application support and availability Technical Data SKU: K604TM Manufacturer: Teknik Makina Article designation: Stechklemmhalter Compatible inserts: 3C MGM Compatible insert maker: Korloy Facts Shank diameter: 20 mm Overall length: 180 mm Outer diameter: 26 mm Cutting height: 35 mm Cutting width: 3 mm Weight: 0.45 kg ISO boring-bar designation: S20Q 3C-R Special features MGM clamping system Intended for grooving / parting tasks Suitable for Korloy indexable inserts Compact, rigid design for reduced vibration FAQ Which indexable inserts fit this holder? The holder accepts 3C MGM indexable inserts; compatibility with Korloy 3C MGM inserts is specified for this Teknik Makina grooving clamp holder (SKU K604TM). What are the key dimensions to check for machine compatibility? Key dimensions are a 20 mm shank, 180 mm overall length, 3 mm cutting width and 35 mm cutting height; these determine toolpost fit and the groove geometry produced by the Stechklemmhalter. Can this holder be used on CNC lathes and manual lathes? The holder is designed for use on lathes and CNC turning centres that accept a 20 mm shank tool; the compact mass and rigid clamping suit both manual and automated turning setups. How is the insert secured in the clamping block? Retention is provided by the MGM clamping system specified for this holder, which secures 3C MGM inserts reliably for stable grooving performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact, reliable solution for secure caliper fixation: the combination of an M5 thread and Ø 10 mm head delivers dependable clamping force, while the 26 mm overall length keeps the fastener unobtrusive in tight assemblies — order via Metav Werkzeuge or consult our specialists for product selection and supply. Locking screw by Teknik Makina — M5 thread, 26 mm overall length Locking screw for secure retention in measuring equipment and light workshop assemblies; designed for simple tightening with a 3 mm Allen key. M5 thread for standard fittings Ø 10 mm head for positive engagement 26 mm overall length for compact installation Requires 3 mm Allen key for assembly Reliable fixation for precision measuring instruments The fastener provides a consistent locking function that is particularly useful where repeatable position retention is required. With an M5 thread and a modest head diameter, the component achieves firm clamping without adding bulk. This makes it well suited to applications where space is limited but stability cannot be compromised. The technical simplicity of the design reduces maintenance needs and supports long-term serviceability in workshop environments. Quick installation and workshop compatibility Installation is straightforward thanks to the standard thread form and the compatibility with a common Allen key 3 mm. The combination of a small head (Ø 10 mm) and 26 mm length allows easy access even in confined setups, so adjustments can be made efficiently during measurement tasks or device servicing. For questions about fit or if additional technical data are required, Metav Werkzeuge offers detailed guidance and can advise on part selection and supply logistics — contact details are provided below. Built for dependable everyday use Though compact, this fastener is designed to perform reliably in routine workshop conditions. The lightweight design keeps added mass to a minimum (approx. 0.1 kg), while the standard M5 specification ensures compatibility with common fixtures and measuring tools. Sourcing from a specialist manufacturer such as Teknik Makina supports consistent component quality and traceability, contributing to fewer interruptions in production and measurement workflows. Contact Metav Werkzeuge for part TC046TM from Teknik Makina for secure caliper retention and expert advice on integration into your workshop setup Technical data Article number: TC046TM Manufacturer: Teknik Makina eClass: 21189290 Weight: 0.1 kg Facts Diameter: 10 mm Thread: M5 Overall length: 26 mm Special features Locking function Requires Allen key 3 mm Compact head for tight assemblies FAQ What is the thread specification of this locking screw? The locking screw is supplied with an M5 thread; refer to SKU TC046TM for exact matching. Which tool is required to tighten the component? Tightening is performed with an Allen key 3 mm, as specified for the part from Teknik Makina (TC046TM). What are the head diameter and overall length? Head diameter is 10 mm (Ø 10 mm) and overall length is 26 mm, suitable for compact installations. Is the fastener suitable for use in measuring instruments? Yes, the component is designed as a locking screw intended to secure positions within measuring equipment and similar small assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust shank design and precise insert compatibility for reliable medium‑duty milling; the secure clamping and quick insert changes support steady production flow. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific advice. S476TM Shank milling cutter by Teknik Makina — for 4NKT 0603 indexable inserts, Ø26 mm, 3‑edge The S476TM is a shank milling cutter engineered for indexable 4NKT 0603 inserts, intended for medium‑duty face and shoulder milling where repeatable chip formation and tool life matter Shank Ø25 mm for stable clamping Cutting diameter Ø26 mm for versatile milling Three cutting edges for balanced cutting action Compatible with Taegutec 4NKT06 inserts Higher metal removal rates with consistent chip control The milling body is designed to deliver a steady cut profile thanks to its three cutting edges, which balance radial loads and reduce vibration during operation. With a cutting diameter of Ø26 mm and an effective 30 mm cutting length, the geometry supports efficient material removal and predictable chip flow. This results in shorter cycle times and fewer rework passes, helping to increase throughput on medium‑sized components while preserving surface integrity. Secure clamping and fast insert changes for uptime A Ø25 mm shank provides secure clamping in standard toolholders, while the insert interface is optimised for fast exchange. The cutter uses standard indexable 4NKT06 inserts and is compatible with Taegutec grades, allowing rapid replacement without regrinding. The clamping is secured by an M3x6.5 Torx screw (Torx key T8), simplifying maintenance and reducing downtime during routine changeovers. Built for workshop reliability and straightforward service With an overall length of 200 mm and a balanced design (tool weight 0.815 kg), the body offers reliable handling in milling spindles and reduces stress on bearings compared with heavier assemblies. The modular approach — an insert‑based cutting system rather than a monolithic tool — lowers lifetime costs: worn cutting edges are replaced individually, which can be more economical in regular production environments. Practical compatibility and procurement advantages The cutter body matches the established 4NKT 0603 insert system, giving shops access to a wide choice of grades and coatings from established suppliers. Integration into an existing fleet is straightforward where Taegutec or equivalent inserts are already used. Metav Werkzeuge’s European distribution and technical support ensure dependable supply and application advice from Emmerich, reinforcing predictable lead times and consistent product availability. For purchase or technical consultation on Teknik Makina’s S476TM shank milling cutter, contact Metav Werkzeuge for procurement assistance and machining recommendations: info@metav-werkzeuge.com | +49 2822 7131930 — Metav’s team will advise on insert grades and clamping options to match production needs Technical data Article number: S476TM Designation: Shank milling cutter for 4NKT 0603 indexable inserts Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Cutting diameter: Ø26 mm Shank diameter: Ø25 mm Cutting length: 30 mm Number of cutting edges: 3 Overall length: 200 mm Weight: 0.815 kg Special features Compatible inserts: 4NKT06 Compatible insert manufacturer: Taegutec Fixing screw: M3x6.5 Torx Torx key size: T8 Intended for medium‑duty milling with indexable inserts FAQ What insert type fits this milling body? The S476TM is designed for 4NKT06 indexable inserts; choose the grade suited to the workpiece material. Which screw and key are required to secure the inserts? Inserts are retained with an M3x6.5 Torx screw using a T8 Torx key. What shank diameter is required for the toolholder? The cutter has a Ø25 mm shank and requires a matching holder for secure clamping. How many cutting edges does the cutter provide and what is the benefit? The body provides three cutting edges, offering balanced cutting forces and improved vibration damping for consistent finishes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable-insert milling solution that combines high retention reliability and straightforward maintenance for continuous production. The combination of a 25 mm shank, 26 mm cutter diameter and a secure Torx fixing provides repeatable seating for ADMT 1606 inserts; order directly via Metav Werkzeuge or consult the technical team for application advice. Shank cutter S464TM — indexable insert milling body, 26 mm dia, 25 mm shank (Teknik Makina) Shank cutter S464TM designed for light-to-medium shoulder milling using ADMT 1606 indexable inserts, suitable where secure clamping and consistent geometry are required 26 mm cutter diameter for standard shoulder milling 25 mm shank for robust toolholding Compatible with ADMT 1606 indexable inserts Torx M4x10 screw (T15) for secure clamping Faster, more predictable machining through stable geometry The machining body is engineered to deliver repeatable cuts with minimal set-up variation. With a 26 mm diameter and two cutting edges, the tool reduces cycle-time variations and supports consistent step-over patterns. The solid 25 mm shank ensures secure seating in standard toolholders, reducing runout and vibration so that surface finish and dimensional stability improve across serial runs. This translates into measurable productivity gains and fewer unplanned tool changes. Secure clamping and simple serviceability cut downtime A single Torx fastener design—M4x10, tightened with a T15 key—simplifies insert changes and torque control. The optimised fixing keeps ADMT 1606 inserts locked precisely in position, lowering the risk of insert movement under load. Maintenance routines therefore become quicker and safer: insert exchange and reassembly are straightforward, which helps to keep machine uptime high and maintenance windows short. Clear application range and material guidance The cutter is specified for ADMT 1606 indexable inserts and is listed as compatible with Walter-type inserts, making tool selection easier when matching insert grades and geometries. The 60 mm cutting length and 200 mm overall length offer a balance between reach and rigidity for common shoulder and face-milling tasks. For those planning process parameters, the tool is suited to conventional and climb milling in typical steels and alloyed materials when paired with the correct insert grade and cutting data. Contact Metav Werkzeuge for tailored process advice and to arrange a precise supply from Emmerich—technical consultants are available to discuss insert grades, clamping best practice and toolholder pairing Technical data SKU: S464TM Manufacturer: Teknik Makina Product type: Shank cutter for ADMT 1606 indexable inserts Torx screw: M4x10 (T15) Compatible insert type: ADMT 1606 Compatible insert manufacturer: Walter Weight: 0.751 kg Core data Cutter diameter: 26 mm Shank diameter: 25 mm Cutting length (shank section): 60 mm Overall length: 200 mm Number of cutting edges: 2 Cutting angle: 90° Special features Indexable insert system: ADMT 1606 Fastening: Torx screw M4x10, key T15 Designed for shoulder and face milling Manufacturer SKU: S464TM FAQ Which insert type is required for this cutter? The cutter accepts ADMT 1606 indexable inserts; compatible Walter-type inserts are suitable when matching geometry and grade. What is the shank diameter and why does it matter? The shank diameter is 25 mm, providing the rigidity required for stable toolholding and reduced runout in standard holders. How long is the cutting length and what reach does that provide? The effective cutting length on the shank section is 60 mm, while the overall tool length is 200 mm, offering a practical balance of reach and stiffness for common operations. How many cutting edges does the tool have? The tool features two cutting edges, which supports efficient material removal with straightforward chip control. Which fastener is used for insert clamping and what key is required? Insert clamping uses a Torx M4x10 screw and requires a T15 Torx key for secure tightening and easy servicing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from increased rigidity and consistent material removal with a robust 25 mm shank and a 26 mm cutting diameter, while retaining flexibility through compatibility with WNMX 0603 indexable inserts; order the S906TM via Metav Werkzeuge or contact our consultants for application advice. S906TM indexable insert milling cutter — 26 mm diameter, compatible with WNMX 0603 inserts (Teknik Cutting Tools) S906TM indexable insert milling cutter for high-efficiency shoulder and slot milling with WNMX 0603 indexable inserts — designed for stable cutting and straightforward clamping. Indexable cutter for WNMX 0603 inserts 26 mm cutting diameter, 90° cutting angle 25 mm shank with 60 mm cutting length Secured by M2.5x5.5 Torx screw, T8 key Reliable rigidity for consistent material removal This indexable insert cutter is engineered to deliver stable performance through a 25 mm shank and a substantial overall length of 150 mm, which together minimise vibration during milling. The 26 mm cutting diameter provides predictable chip load per tooth and, combined with the four cutting edges, enables steady stock removal in interrupted cuts. Because the tool is designed for WNMX 0603 inserts, tool changeover is fast and repeatable, reducing non-productive time and improving process consistency for both batch and single-piece production. Secure clamping and insert compatibility for shop-floor efficiency Clamping is accomplished with a precision Torx fastener (M2.5x5.5) tightened with a T8 key, ensuring reliable seat and repeatability of the insert position. The cutter accepts Korloy and equivalent WNMX 0603 indexable inserts, allowing compatibility with widely available grades for roughing and finishing. The 90° cutting angle supports shoulder milling and square-shoulder features with minimal set-up complexity, making the tool suitable for general machining tasks where fast insert replacement and dependable seating are priorities. Practical integration and supply assurance for production workflows With a design focused on industrial applicability, the tool’s four cutting edges balance cutting economy and tool life: more edges yield more index positions per insert, lowering tooling cost per part. The listed mass of 0.582 kg and the 60 mm cutting length are suitable for a wide range of milling setups while maintaining toolholder stability. Procurement and supply are supported through Metav’s European distribution, providing straightforward replacement orders and consistent availability to reduce lead-time risks for workshops and industrial buyers. Contact Metav Werkzeuge to confirm the Teknik Cutting Tools S906TM for the intended machining tasks and secure prompt delivery from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S906TM Manufacturer: Teknik Makina Type: Indexable insert milling cutter for WNMX 0603 inserts Compatible insert form: WNMX 0603 Suitable insert supplier: Korloy Facts Cutting diameter: 26 mm Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.582 kg Torx screw: M2.5x5.5 Torx key size: T8 Special features Indexable insert system for fast replaceability Designed for shoulder and slot milling Robust shank for improved rigidity Compatible with Korloy WNMX 0603 inserts FAQ Which inserts fit this cutter? The S906TM indexable insert milling cutter accepts WNMX 0603 inserts; Korloy WNMX 0603 grades are specifically compatible and commonly used with this tool. What is the shank diameter and why does it matter? The shank diameter is 25 mm, which increases rigidity in the toolholder and helps reduce vibration for more consistent surface finish and longer insert life. How many cutting edges are available per cutter? This cutter is equipped with 4 cutting edges, allowing multiple index positions per insert to extend effective tool life and reduce tooling cost per part. Is the clamping hardware standardised? Clamping is via a Torx screw M2.5x5.5 tightened with a T8 key, providing a repeatable and secure seat for the insert. For which machining operations is the tool best suited? With a 90° cutting angle and a 26 mm diameter, the tool is suitable for shoulder milling, slotting and general face-milling tasks where indexable inserts are preferred for rapid changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of internal coolant, stable clamping and precise dimensions to keep milling processes reliable and efficient; order the shank milling cutter directly via Metav Werkzeuge or consult the technical team for application advice. Shank milling cutter S840-1TM — 26 mm cutter with internal coolant for XNKT 0604 indexable inserts (Teknik Makina) Shank milling cutter S840-1TM designed for secure insert mounting and continuous production use with XNKT 0604 indexable inserts, featuring internal coolant for improved tool life and chip evacuation 26 mm cutting diameter, robust design Internal coolant for improved chip control 25 mm precision shank for stable clamping Compatible with Korloy XNKT 0604 inserts Engineered for dependable cutting performance The S840-1TM is built around a compact 26 mm cutter diameter and a 25 mm shank, combining rigidity with accessibility in confined set-ups. The tool accepts XNKT 0604 indexable inserts, providing a cost-effective approach to tool life management because inserts can be rotated or replaced without removing the whole cutter. The integrated internal coolant channel directs coolant to the cutting zone, which supports heat dissipation and chip flushing; this reduces edge wear and helps maintain surface quality over longer cycles. The result is a milling solution that prioritises process stability and repeatability. Measurable productivity and reduced downtime Process efficiency is delivered through a simple, serviceable design: three insert seats, secured with M3x7 Torx screws, enable straightforward indexing and re-clamping. The requirement for a T8 Torx key ensures consistent screw torque during maintenance. Stable clamping from the precise shank geometry diminishes vibration and enables higher metal removal rates where insert geometry and machining parameters allow. For production planners, that translates into fewer stoppages and predictable cycle times, supporting throughput targets without complex set-up procedures. Practical handling, compatibility and workshop benefits With an overall length of 150 mm and a cutting-head length of 40 mm, the tool balances reach and stiffness for many milling tasks. The assembly weight of 0.572 kg aids in predictable tool-change handling. Compatibility with Korloy XNKT 0604 inserts simplifies procurement and inventory management when these inserts are standard in the shop. Replacement procedures focus on regular inspection of screw torque and insert seat cleanliness to preserve repeatable positioning; keeping the internal coolant channel free of swarf supports consistent performance. For bespoke application advice or material-specific recommendations, technical consultation is available. Contact Metav Werkzeuge today to discuss specification, verify suitability for intended applications and ensure reliable supply from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: S840-1TM ECLASS: 21180806 Manufacturer: Teknik Makina Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting head length: 40 mm Weight: 0.572 kg Number of cutting seats: 3 Special features Internal coolant channel Compatible with XNKT 0604 indexable inserts Torx screw M3x7 for insert fastening Torx key required: T8 FAQ What insert type fits this shank milling cutter? The cutter is designed for XNKT 0604 indexable inserts; Korloy XNKT 0604 inserts are explicitly compatible with this tool. How is coolant delivered to the cutting zone? Internal coolant is supplied through a built-in channel that directs fluid to the insert seats, improving chip evacuation and edge life for the S840-1TM. Which fastening hardware secures the inserts? Inserts are secured with M3x7 Torx screws; a T8 Torx key is used for tightening and removal. What are the key dimensions for setting up the tool in a holder? Key dimensions: 26 mm diameter, 25 mm shank diameter, 150 mm overall length and 40 mm cutting-head length. Is the tool suitable for quick insert changes during production? Yes; the indexable design with three insert seats and Torx screws enables rapid insert indexing and replacement to minimise downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of 25 mm shank rigidity, 26 mm cutter diameter and compatibility with ENMX 0604 indexable inserts for steady, repeatable milling results; order the Schaftfräser S113TM directly via Metav Werkzeuge or consult our technical advisers for application support Schaftfräser S113TM – indexable insert milling cutter with 26 mm diameter and 25 mm shank (Teknik Makina) Schaftfräser S113TM is a compact indexable milling cutter designed for efficient, repeatable material removal in industrial milling applications with ENMX 0604 inserts 25 mm shank for stable clamping Compatible with ENMX 0604 indexable inserts 26 mm cutter diameter for versatile milling Torx M2.5x7 screw; T8 key required Higher metal removal rates with indexable inserts The head is configured for ENMX 0604 indexable inserts, enabling fast index changes and consistent cutting geometry. With four cutting edges, the tool reduces downtime for insert rotation and replacement, which directly improves machine uptime. The replaceable-insert design allows costs to be focused on consumables rather than complete tool replacements, delivering an economic advantage for frequent-production environments. The combination of secure insert clamping and stable geometry supports steady chip formation and predictable cutting behaviour, which aids programming and process planning. Rigid clamping and controlled reach for steady cuts A 25 mm shank and 150 mm overall length provide a balance between stiffness and working reach. The compact shank diameter contributes to reduced deflection under load, keeping tolerances tight during slotting and peripheral milling tasks. Changing inserts is straightforward via the Torx M2.5x7 screw (Torx key T8), enabling quick, toolroom-style maintenance without complex fixtures. This configuration supports shops that demand repeatable results across batch runs while keeping setup times low and tool handling intuitive. Practical workshop integration and proven reliability Designed for indexable operations in production and maintenance settings, this cutter accepts inserts from established partners such as YG-1, ensuring easy sourcing of compatible grades. The tool’s geometry and insert format allow a pragmatic combination of roughing and light finishing with the same holder, simplifying tooling lists and reducing inventory complexity. For users seeking straightforward retrofitting into existing spindle holders or milling arbors, the S113TM’s standard dimensions make integration predictable. Metav’s position as a precision partner guarantees that procurement and supply chain handling are transparent and dependable. For a tailored recommendation or to confirm fitment for a specific milling set-up, contact Metav Werkzeuge — our specialists will advise on suitable inserts and clamping procedures and can supply the S113TM and matching accessories promptly Technical data Article number: S113TM Manufacturer: Teknik Makina Core data Cutter diameter: 26 mm Shank diameter (D): 25 mm Overall length: 150 mm Number of cutting edges: 4 Compatible insert type: ENMX 0604 Compatible insert manufacturer: YG-1 Torx screw: M2.5x7 Torx key: T8 Eclass: 21180806 ETIM: EC011860 Versions & special features Indexable insert milling cutter configuration Replaceable ENMX 0604 inserts Compact shank for rigid clamping Quick insert change via Torx screw FAQ What inserts fit this milling cutter? The S113TM is designed for ENMX 0604 indexable inserts; compatible grades from YG-1 are commonly used for this holder. How many cutting edges does the tool have? This cutter is equipped with four cutting edges, enabling balanced cutting and efficient index changes. What shank size is required for mounting? The tool features a 25 mm shank, suitable for holders and arbors that accept that diameter. Which screw and key are needed to secure the inserts? Insert retention uses a Torx M2.5x7 screw; secure tightening requires a T8 Torx key. Can this cutter be supplied with alternative insert brands? While the S113TM is specified for ENMX 0604 inserts, alternative brands that offer the same insert geometry can be used provided they meet the ENMX 0604 specification Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact combination of reliable insert compatibility, a 26 mm cutting diameter and a secure 25 mm shank that keeps tool changes efficient and runout low; order the S198TM directly via Metav Werkzeuge or consult our specialists for application-specific advice. S198TM Shank Milling Cutter — for XNEX 0403 indexable inserts, 26 mm cutting diameter (Teknik Makina) A S198TM shank milling cutter engineered for use with XNEX 0403 indexable inserts, delivering stable medium‑duty milling with a 25 mm shank and four cutting edges for consistent material removal. Compatible with XNEX 0403 indexable inserts 26 mm cutting diameter for medium machining 4 cutting edges for stable material removal 25 mm shank for secure toolholder fit Consistent machining performance through proven insert technology The tool combines the advantages of indexable inserts with a compact cutter body so shops gain repeatable results without the need for complex regrinding. By accepting XNEX 0403 inserts, the tool ensures predictable chip formation and straightforward edge replacement; this reduces preparation time and keeps cycle times tight. The configuration with four cutting edges gives a good balance between feed rate capability and surface finish, making the milling tool suitable for common milling tasks where consistent geometry and tool life are required. Secure clamping and simple serviceability to limit downtime A 25 mm shank provides a firm connection to standard toolholders, lowering the risk of micro‑movement under load and helping to maintain tolerances in series production. Insert fastening uses an M2.5x7 Torx clamping screw with a T8 key for rapid, tool‑shop friendly replacement of inserts; the straightforward clamping concept shortens maintenance intervals and keeps the production line turning. The combination of robust clamping and easy access to the screw supports quick changeovers while preserving concentricity and runout control. Compact dimensions for versatile workshop and production use With a 26 mm diameter and 150 mm overall length, the cutter fits a broad range of milling operations in small to medium machining centres and milling heads. The design suits a variety of common materials when combined with appropriate XNEX 0403 inserts from established manufacturers such as SECO, offering a pragmatic tool choice for job shops and in‑house production. The compact geometry helps reduce overhang where precision matters, contributing to improved surface quality and prolonged insert life. For tailored advice on integrating the Teknik Makina S198TM into existing tool sets, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application details and insert selection. Technical Data Article number: S198TM Manufacturer: Teknik Makina Product: Shank milling cutter for XNEX 0403 indexable inserts Compatible inserts: XNEX 0403 (SECO compatible) Clamping screw: M2,5x7 Torx key: T8 Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting edges: 4 Special features Indexable insert concept for rapid edge change Compact design for reduced overhang Suited for medium machining tasks Robust shank for stable toolholder fit FAQ Which insert type is required for this cutter? The cutter is designed for XNEX 0403 indexable inserts; select inserts compatible with that designation for correct seat fit and cutting geometry. Is the shank diameter suitable for standard holders? Yes, the 25 mm shank matches common toolholders and is intended to provide a secure connection for stable machining. How are the inserts fastened and serviced? Inserts are secured with an M2.5x7 Torx screw; a T8 key is used for quick replacement, allowing efficient servicing on the shop floor. What machining operations suit this cutter? The tool is intended for medium‑duty milling in production and workshop environments where a 26 mm diameter cutter with four cutting edges provides a balance of speed and surface quality. Can this tool be used with SECO inserts? The mounting accepts XNEX 0403 inserts and is compatible with offerings from established suppliers such as SECO, provided the insert form matches the seat. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust clamping with rapid insert changes to maintain consistent throughput; benefit from the combination of a 26 mm cutting diameter, 4-flute geometry and secure 25 mm shank for steady production. Order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Shank cutter S482TM – 26 mm diameter, 4‑flute indexable system (Teknik Makina) A shank cutter S482TM engineered for use with BLMP 0603 indexable inserts, delivering stable clamping and efficient chip evacuation in insert-based milling systems 26 mm cutting diameter 4 cutting edges for smooth engagement Compatible with BLMP 0603 indexable inserts 25 mm shank diameter for secure clamping Stable geometry for predictable productivity The tool's 26 mm cutting diameter combined with a 4-flute configuration provides a balance between metal removal rate and surface finish. The 25 mm shank reduces run-out and vibration when mounted in rigid holders, which directly improves dimensional consistency on series parts. Because the cutter accepts BLMP 0603 indexable inserts, tool life management becomes a matter of exchanging inserts rather than replacing the whole tool body, simplifying inventory and lowering per-part tooling cost. The clear correspondence between cutter geometry and insert form ensures repeatable results in batch production. Quick maintenance and repeatable set‑ups reduce downtime Fast insert changes are supported by the supplied Torx fixings: a M3x6.5 screw tightened with a T8 key secures each insert securely while allowing rapid replacement. The tool offers a 40 mm cutting length and a 200 mm overall length, dimensions that suit a range of holder setups without compromising rigidity. At 0.771 kg, the tool balances mass for stability with manageable handling during changeover. These characteristics make the cutter an economical choice where uptime and reproducibility are primary concerns, enabling shorter set-up intervals and reliable tolerance adherence. Flexible integration for insert-based workflows Designed around the established indexable concept, this cutter works with inserts from Taegutec and supports grading strategies that match cutting conditions to workpiece demands. The modular approach allows machining strategies to be adapted — from high-feed passes to finishing — by selecting appropriate insert grades and geometries. Combined with Metav’s emphasis on dependable supply and technical competence, the system supports streamlined procurement and consistent quality on the shopfloor. The result is a pragmatic tool solution that aligns with industrial production requirements while keeping toolstock manageable. For application-specific advice or to arrange supply of the TekniK Cutting Tools shank cutter S482TM from Metav Werkzeuge, contact our consultants in Emmerich for rapid technical guidance and consistent delivery Technical Data SKU: S482TM Manufacturer: Teknik Makina Article designation: Shank cutter for BLMP 0603 indexable inserts Compatible insert type: BLMP 0603 Compatible insert manufacturer: Taegutec Torx screw: M3x6.5 Torx key size: T8 eClass: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 26 mm Shank diameter: 25 mm Number of cutting edges: 4 Cutting length: 40 mm Overall length: 200 mm Weight: 0.771 kg Design features Indexable insert concept Secure Torx fastening system Files / drawings available (file IDs: 62de7e510f56dbb4de4dbf06, 62de7ee633927e49dbf3278f) Solid shank construction for stable clamping FAQ Which insert type fits this cutter? The cutter accepts BLMP 0603 indexable inserts; it is designed to be used with inserts from Taegutec in the specified seat form. What are the key dimensions of the tool? Key dimensions are: 26 mm cutting diameter, 40 mm cutting length and 200 mm overall length; the shank diameter is 25 mm. How is an insert secured in the cutter? Inserts are secured with a M3x6.5 Torx screw; the matching drive size is T8, enabling straightforward and repeatable clamping. Is the design suitable for series production? Yes. The indexable insert system and 4-flute geometry offer efficient chip removal and consistent engagement, supporting repeatable machining in medium- to high-volume runs. Which manufacturer produces the tool and who is responsible for supply in Europe? The tool is produced by Teknik Cutting Tools; supply and responsibility for distribution in Europe are handled by Metav Werkzeuge GmbH Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the tool's combination of a 26 mm diameter, four cutting edges and a 25 mm shank for dependable rigidity and predictable cycle times; order via Metav Werkzeuge or consult our specialists for application advice. End mill S686TM for LNMU 0303 indexable inserts — 26 mm, 4 flutes (Teknik Makina) A robust End mill S686TM engineered to accept LNMU 0303 indexable inserts for precision milling in workshop and small-series production environments 26 mm diameter for stable cutting Four cutting edges for smooth removal 25 mm shank for rigid toolholding Compatible with LNMU 0303 inserts Consistent material removal for predictable cycles The End mill S686TM combines a 26 mm diameter with four cutting edges to deliver balanced chip formation and reduced vibration. The tool’s geometry promotes repeatable chip evacuation, while the 60 mm cutting length and 150 mm overall length give the necessary reach without excessive overhang. In practice this translates into shorter cycle times and fewer surface defects, so production planners achieve more reliable throughput and reduced rework. Secure clamping and dependable rigidity A 25 mm shank provides a compact, stiff interface with standard holders or collets, improving axial and radial stability during milling. The insert is secured with a T8 Torx key and M2.5x7 screw, enabling repeatable clamping torque and straightforward maintenance routines. These fastening features help to minimise chatter, support consistent dimensional accuracy and extend effective tool life across continuous runs. Fast indexable-insert handling to reduce downtime Designed specifically for LNMU 0303 indexable inserts, the cutter allows rapid insert changes with minimal tooling, supporting lean maintenance practices. Using standardised inserts from suppliers such as Tungaloy simplifies spare parts logistics and makes tooling more predictable across machines. Faster insert swaps reduce inactive time on the machine and keep production schedules more consistent. Suitable for workshop and small-series production The end mill’s balanced flute design and compact dimensions suit both bench workshops and small-series production where stability and repeatability matter. The combination of multiple cutting edges and a rigid shank supports stable feed rates and predictable tool behaviour, aiding process planning. The tool weight of 0.612 kg contributes to a known dynamic response in common toolholders, helping operators to fine-tune feeds and speeds. Contact Metav Werkzeuge for tailored technical advice or to request availability of the Teknik Makina end mill S686TM from our Emmerich stock Technical data Article number: S686TM Manufacturer: Teknik Makina Compatible inserts: LNMU 0303 Core dimensions Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.612 kg Features & fastening Insert screw: M2.5x7 Torx key: T8 Compatible insert manufacturer: Tungaloy ECLASS: 21180806 Product type: End mill FAQ Which insert type fits this cutter? The cutter accepts LNMU 0303 indexable inserts; use of standard LNMU 0303 inserts is recommended for the best fit. What clamping interface is required for the toolholder? A 25 mm shank interface is specified, so holders or collets designed for a 25 mm shank are appropriate for secure clamping of this tool. How many cutting edges are provided and what is the effect on finish? The tool features four cutting edges; this configuration balances material removal with surface finish and generally produces steady cutting forces. Which screw and key are used for the insert? Insert fastening requires an M2.5x7 screw and a T8 Torx key for correct clamping and repeatable torque. What are the main dimensions to consider when planning setups? Key dimensions are: 26 mm diameter, 150 mm overall length and 60 mm cutting length, which determine reach and overhang for set-up planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a high‑precision, insert‑based milling system that combines stable cutting geometry and simple clamping for predictable cycle times; the robust shank and four cutting edges support consistent chip control and long tool life. Order the insert milling cutter directly via Metav Werkzeuge or consult the technical advisers for tailored recommendations. Shaft milling cutter S595-1TM by Teknik Makina — 26 mm cutting diameter, optimized for R390-11T3 inserts Shaft milling cutter S595-1TM for light to medium milling operations with R390-11T3 indexable inserts, suited to CNC toolrooms and production environments 26 mm cutting diameter 25 mm shank diameter Compatible with Sandvik R390-11T3 inserts Four cutting edges for stable machining Consistent production through proven geometry The S595-1TM is designed around a 26 mm cutting circle and a 90° cutting angle to deliver repeatable slotting and face‑milling results. The four cutting edges reduce vibration compared with fewer‑tooth alternatives, which improves surface finish and extends insert life. For planners and production engineers, this means fewer tool changes and more predictable cycle times — a clear efficiency gain when lining up batch runs or mixed lots. Simple compatibility and secure clamping Compatibility with R390-11T3 indexable inserts from Sandvik ensures wide availability of grades and chipbreakers for the application spectrum. The insert is secured with an M2.5x7 Torx screw tightened using a T8 key, providing a compact, serviceable clamping solution. Clear identification of insert type and standardised fastening enables fast, error‑resistant changeovers on the shopfloor and straightforward inventory management. Practical machining benefits and material range With a 25 mm shank diameter and a 50 mm effective cutting length, the cutter body supports stable toolholding in standard collets and holders, reducing deflection during heavier passes. The combination of shank rigidity and multiple cutting edges favours materials where steady removal rates are required; the geometry facilitates reliable chip evacuation and consistent surface integrity across normal steels and alloyed workpieces. Handling, maintenance and workshop integration The body’s overall length of 150 mm and a weight of 0.557 kg make the tool easy to handle while still providing sufficient overhang for many common set‑ups. Routine maintenance is limited to insert and screw replacement; use of the specified Torx key prevents over‑ or under‑torquing. If application data are unclear, Metav’s precision team can advise on insert grade selection and recommended cutting parameters to match the machining task. Discuss tooling options with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for application advice and to order the Teknik Makina S595-1TM insert milling cutter suited to existing toolholders Technical Data Article number: S595-1TM Manufacturer: Teknik Makina Compatible inserts: R390-11T3 Compatible insert maker: Sandvik Torx screw: M2.5x7 Torx key size: T8 Facts Diameter: 26 mm Shank diameter: 25 mm Cutting length (shank): 50 mm Overall length: 150 mm Cutting edges: 4 Weight: 0.557 kg Cutting angle: 90° Special features Indexable insert system Secure Torx fastening Suitable for standard collet holders Optimised geometry for chip control FAQ Which inserts fit this milling body? The S595-1TM accepts R390-11T3 indexable inserts; compatible grades from Sandvik are commonly used for a range of steels and alloyed materials. What fastening hardware is required for insert changes? Insert retention uses an M2.5x7 Torx screw and requires a T8 Torx key for secure clamping on the S595-1TM body. Is the shank suitable for standard toolholders? Yes — the 25 mm shank diameter is compatible with standard collet systems and holders typically used in CNC toolrooms for stable mounting. What benefits do four cutting edges provide? Four cutting edges balance material removal rate with vibration damping, improving surface finish and extending insert life in continuous or semi‑continuous production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable solution that combines consistent drilling performance with quick insert changeovers; the compact Ø 26 mm diameter together with a 104 mm cutting length supports efficient, repeatable production. Secure procurement and expert advice are available via Metav Werkzeuge. Indexable drill body U726TM – Ø 26 mm, for SPMG 07T3 inserts (Teknik Makina) The Indexable drill body U726TM is engineered for industrial drilling operations requiring indexable insert tooling; ideal where repeatability and fast reconditioning are priorities 26 mm cutting diameter for medium holes Compatible with SPMG 07T3 indexable inserts 25 mm shank diameter for secure clamping 104 mm effective cutting length for deep holes Consistent metal removal from first cut to last The U726TM body is built to deliver predictable cutting performance across production batches. With a Ø26 mm diameter and an effective cutting length of 104 mm, the design balances rigidity and reach to reduce vibration and improve hole quality. The 25 mm shank provides a solid clamping interface in standard toolholders, helping to maintain runout and prolong insert life. These measurable specifications translate into fewer rejected parts and a more reliable machining cycle, which directly improves throughput and lowers scrap rates. Faster setup and lower tooling overhead Adaptability is a clear benefit: the tool accepts SPMG 07T3 inserts and is compatible with established insert brands such as Taegutec and YG-1, enabling the use of widely available cutting edges. Standardised insert geometry reduces stocking complexity and shortens changeover time when resharpening or replacing inserts. The modular approach shifts maintenance from expensive regrinds to quick insert swaps, improving machine uptime and simplifying logistics for production planners and purchasing departments. Robust design for everyday workshop demands A total length of 187 mm combined with a clamping length of 56 mm supports both stability and accessibility in typical tool setups. The tool’s modest mass of 0.539 kg reflects a compact construction that is easy to handle while remaining stiff under cutting forces. The indexable format allows individual cutting edges to be renewed without replacing the entire tool body; this reduces long-term costs and keeps performance consistent. Clear, repeatable assembly tolerances make routine servicing straightforward and suitable for busy toolrooms. Where this tool brings most value This drill body is intended for workshop and production environments that favour indexable tooling for medium-diameter holes and moderate depths. It suits applications where manufacturers need a dependable drill body that pairs with commercial SPMG 07T3 inserts and common suppliers like Taegutec and YG-1. The combination of a secure 25 mm shank and ample cutting length supports tasks such as component and fixture drilling where cycle stability and quick insert replacement are priorities. For operations looking to streamline their tooling inventory while maintaining machining quality, this solution offers clear gains. The U726TM can be specified as part of a broader cutting tool strategy that emphasises modularity and predictable performance. Contact Metav Werkzeuge for tailored tooling advice and procurement of the Teknik Makina U726TM — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical information Article number: U726TM Manufacturer: Teknik Makina Core technical data Diameter: 26 mm Total length: 187 mm Cutting length: 104 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.539 kg Special features Compatible inserts: SPMG 07T3 Suitable insert manufacturers: Taegutec, YG-1 eClass: 21180201 FAQ Which insert type fits this drill body? The drill body accepts SPMG 07T3 indexable inserts; this standardised format enables use of inserts from suppliers such as Taegutec and YG-1. What clamping interface is required for secure use? A toolholder that accommodates a 25 mm shank diameter with sufficient clamping length matches the drill body’s interface and helps maintain low runout. How deep can holes be made with this tool? The effective cutting length is 104 mm, which defines the recommended depth for single-pass drilling to achieve consistent hole quality. Is the drill body suitable for high-volume production? Yes; the indexable design and standard insert availability support quick edge changes and predictable performance suited to repetitive production work. What are the overall dimensions and mass for planning tool setups? Total length is 187 mm and the weight is 0.539 kg, providing a compact, manageable profile for most machining centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise holemaking and reliable insert compatibility for consistent production results; the tool supports quick insert changes and secure clamping for reduced downtime. Order the drill directly via Metav Werkzeuge or consult the team for application advice. Indexable drill U620TM — 26 mm, 104 mm cutting length (Teknik Makina) Indexable drill U620TM designed for medium‑depth drilling with replaceable Korloy inserts, suitable for a wide range of shopfloor applications 26 mm nominal diameter 104 mm effective cutting length 25 mm shank for secure clamping Compatible with Korloy WCM‑0503 inserts High productivity through optimised cutting geometry The U620TM body is engineered for efficient chip evacuation and stable cutting, delivering a consistent hole quality across medium‑depth bores. With a 26 mm diameter and a 104 mm cutting length, the tool reduces the need for multiple operations by combining reach and rigidity. The use of indexable inserts allows rapid replacement when edges wear, lowering machine downtime and inventory costs while maintaining a steady cycle time. These characteristics translate into measurable productivity improvements in series production environments. Secure clamping and vibrational stability for repeatable results A 25 mm shank and a robust tool body ensure reliable clamping in standard holders, improving concentricity and reducing runout. The overall length of 187 mm combined with a 56 mm shank engagement balances accessibility with stiffness, limiting chatter during plunge and peck cycles. The tool’s mass (approx. 0.542 kg) contributes to stable cutting dynamics without compromising handling during setup. For shops aiming to increase first‑pass yield, a stable toolholder interface is a clear technical advantage. Simple insert system that cuts operating costs This indexable design accepts Korloy WCM‑0503 inserts, enabling quick on‑machine changes and consistent edge geometry. The insert system simplifies inventory management—only a small range of inserts is required to cover repeated regrinds or replacements—while delivering uniform surface finish and hole tolerance. For engineers seeking predictable tool life and easier planning of maintenance intervals, the replaceable‑insert concept provides a pragmatic balance between performance and running costs. Practical fit for a broad range of turning and milling centres The drill body is suitable for integration into common machining centres and drilling units that accept a 25 mm shank diameter, providing flexibility for mixed‑fleet workshops. The combination of 26 mm diameter and 104 mm effective cutting length makes the tool a reliable choice for through and blind holes in components where medium‑depth bores are required. Toolroom managers benefit from fewer special tools to stock, and operators appreciate the straightforward assembly and repeatable clamping behaviour. Contact Metav Werkzeuge today to discuss suitability for existing toolholders or to arrange a technical review of the U620TM and its compatible Korloy WCM‑0503 inserts; Metav Werkzeuge offers product advice and reliable supply from Emmerich. Technical data SKU: U620TM Manufacturer: Teknik Makina Article name: Vollbohrer / indexable drill Core data Diameter: 26 mm Overall length: 187 mm Cutting length: 104 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.542 kg Special features Compatible inserts: WCM‑0503 Suitable for insert manufacturer: Korloy Replaceable indexable insert concept FAQ What materials is this drill suitable for? The indexable drill U620TM is designed for general industrial use and, when fitted with the correct Korloy WCM‑0503 inserts, is suitable for a broad range of common workshop materials; selection of insert grade determines the optimal material range. How is insert replacement performed on the U620TM? Insert replacement on the U620TM is performed by loosening the insert clamp, removing the worn WCM‑0503 insert, and seating a new insert; the modular design enables fast, repeatable changes. Which toolholders accept the U620TM shank? The U620TM uses a 25 mm shank and is compatible with standard holders that secure a 25 mm diameter shank; correct clamping length and holder concentricity are advised for best results. Does the U620TM support deep drilling cycles? With a 104 mm cutting length and 187 mm overall length, the tool is aimed at medium‑depth bores; for very deep or specialised cycles, assessment of rigidity and coolant strategy is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable drilling solution with a 26 mm cutting diameter and 130 mm cutter length that delivers stable, repeatable results and reduced downtime. Order direct via Metav Werkzeuge or consult our specialists for application-specific recommendations and toolholder matching. Indexable drill Vollbohrer U786TM — 26 mm diameter, 130 mm cutting length (Teknik Makina) Vollbohrer U786TM is an indexable drill body designed for medium‑depth bore operations where rigidity and rapid insert changes are required; ideally used in production and workshop CNC applications. 26 mm cutting diameter 130 mm cutting length 25 mm shank diameter Compatible with Korloy WCM-0503 inserts Stable drilling performance for consistent cycle times The indexable drill body delivers a combination of rigidity and reach that supports stable chip formation and repeatable hole quality. With a 26 mm diameter and 130 mm cutting length, the tool body maintains axial stiffness appropriate for slotting deeper bores while the substantial shank diameter minimises deflection. The result is improved process reliability and fewer scrapped parts, contributing directly to smoother production flows and more predictable machining sequences. Rapid insert changes and cost-effective tooling Designed to accept WCM-0503 indexable inserts from Korloy, the drill body shortens maintenance intervals and lowers tooling costs by separating the cutting edge from the body. Quick insert replacement reduces machine downtime; worn inserts are replaced rather than the whole tool, which improves cost per bore and inventory management. The insert interface is engineered for secure seating to preserve repeatability after each change, aiding consistent surface finish and dimensional accuracy. Practical mounting and handling for workshop use Machining setups benefit from the compact overall length of 213 mm combined with a 25 mm shank and 56 mm shank engagement length. These dimensions support reliable clamping in standard toolholders and enhance concentricity at moderate spindle speeds. At a weight of 0.62 kg, the drill body is straightforward to handle on the shop floor and integrates well with automated tool pre‑setters and magazine systems, helping to speed up tool changes during shift work. Supply reliability and partnership advantages Sourcing this indexable drilling solution through Metav brings practical supply‑chain benefits: Metav’s Emmerich location acts as a quality filter for European customers, backed by a catalogue of over 250,000 products and the trust of more than 48,000 customers. This means robust availability, consolidated procurement and confident long‑term supply — particularly valuable for production environments that require consistent replacement inserts and replacement bodies to avoid unexpected downtime. Contact Metav Werkzeuge for tailored tooling guidance on Teknik Makina indexable drills, insert recommendations and toolholder compatibility — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: U786TM Manufacturer: Teknik Makina Product: Indexable drill Facts Diameter: 26 mm Overall length: 213 mm Cutting length: 130 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.62 kg Special features Compatible inserts: WCM-0503 Compatible insert manufacturer: Korloy eClass: 21180201 FAQ Which insert type fits this drill body? The drill body accepts WCM-0503 indexable inserts; compatibility is specified for Korloy inserts in the product data. What are the principal dimensions to consider for toolholder selection? Key dimensions are a 26 mm cutting diameter, 25 mm shank diameter, 56 mm shank engagement and 213 mm overall length for the U786TM drill body. How does the design affect downtime and tooling costs? Using replaceable WCM-0503 inserts reduces downtime and tooling expenditure because inserts are renewed separately from the drill body rather than replacing the entire tool. Is the drill body suitable for automated tool magazines and presetter use? Yes; the combination of shank length and overall length supports reliable clamping and is compatible with common presetter and magazine workflows. Who manufactured the drill body and what is the SKU for ordering? The drill body is supplied by Teknik Makina and listed under SKU U786TM for procurement and reordering purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable Ø 26 mm cutting diameter, a compact cutting length of 52 mm and a 25 mm shank for secure clamping; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance Indexable drill U120TM — Ø 26 mm | 25 mm shank | Teknik Makina An Indexable drill U120TM designed for efficient, repeatable holemaking in production machining, compatible with Korloy WCM-0503 indexable inserts Ø 26 mm for medium-diameter holes 25 mm shank for stable clamping Cutting length 52 mm for controlled engagement Compatible with Korloy WCM-0503 inserts Consistent hole quality with controlled cutting geometry The U120TM body is conceived to deliver repeatable hole accuracy through a balanced ratio of cutting length and overall length. With a cutting length of 52 mm and an overall length of 135 mm, the design provides the reach required for many setups while limiting unsupported overhang. The tool’s Ø 26 mm diameter paired with a 25 mm shank ensures a robust connection to the toolholder; this improves stability and reduces the risk of runout. In practical terms, this means fewer reworks and a better first-time-right rate in batch production. Improved productivity through rigid mounting and compact design A compact shank seating of 56 mm contributes to reliable clamping in standard holders, translating into improved rigidity at the cutting edge. The tool’s modest mass (approx. 0.42 kg) helps to lower inertial loads during spindle acceleration, which can reduce vibration and extend insert life in cyclic production. These measurable attributes support higher Machining stability and enable efficient cycle times without compromising surface finish or dimensional control, representing a direct benefit for process planners and shop-floor engineers. Straightforward insert management and reduced downtime The indexable design accepts Korloy WCM-0503 inserts, facilitating fast index changes and straightforward inventory management. Using common insert types simplifies procurement and keeps stocking efficient, while the indexable concept avoids complete-tool replacement — only worn cutting edges are renewed. For maintenance regimes this means quicker turnaround, less downtime and a lower total cost of ownership compared with non-indexable alternatives. The U120TM body supports predictable tool-change intervals and simple insert handling. Supply confidence and industrial partnership for scale-up Sourcing through Metav brings centralised availability and a vetted quality filter for the European market. Metav’s offering is backed by a broad product range and long-standing supply reliability from Emmerich, which supports production continuity when scaling batches or introducing new part families. Combined with the technical specification above, this creates a dependable solution for manufacturing environments that require consistent performance and transparent logistics. Contact Metav Werkzeuge today to discuss application suitability for the U120TM indexable drill and to arrange delivery from our Emmerich inventory Technical data Article number: U120TM Manufacturer: Teknik Makina Facts Diameter: 26 mm Cutting length: 52 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 135 mm Weight: 0.42 kg Special features Compatible inserts: WCM-0503 Compatible insert manufacturer: Korloy Tool type: Indexable drill body FAQ What materials is this indexable drill suitable for? The U120TM is an indexable drill body; material suitability depends on the selected Korloy WCM-0503 insert grade and cutting parameters rather than the body itself. How are inserts mounted and changed on the U120TM? Inserts for the U120TM are clamped into the cutter pockets; worn inserts are indexed or replaced without changing the drill body to reduce downtime. Is the shank compatible with standard holders? The U120TM features a 25 mm shank diameter and a 56 mm shank seating length suitable for standard clamping systems that accept this size. Can the U120TM be used in automated tool magazines? Yes, the compact form factor and standard shank dimensions allow integration into systems that accept indexable drill bodies of this size. What is the benefit of choosing indexable over solid drills for production? Indexable solutions like the U120TM permit rapid insert replacement, easier inventory control and lower replacement costs per edge, which is advantageous for medium- to high-volume machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust indexable cutting system combined with a Ø26 mm cutting diameter and a secure 25 mm shank for stable clamping and consistent hole quality; order the insert drill directly via Metav Werkzeuge or consult our technical advisors for production-ready setup. Vollbohrer — Insert drill, Ø26 mm, 25 mm shank (Teknik Makina) The Vollbohrer is an indexable insert drill engineered for precise and efficient holemaking in machining centres and engineering workshops. Ø26 mm cutting diameter, robust performance 52 mm cutting length for deeper holes 25 mm shank for secure clamping Compatible with SPMG 07T3 indexable inserts Increase throughput with a stable indexable system The insert drill delivers predictable cycle times thanks to its indexable insert concept and optimised geometry. With a 52 mm cutting length and Ø26 mm diameter, the tool enables deeper holemaking without compromising process stability. The insert-based system reduces downtime for tool changes: worn inserts are exchanged quickly, restoring cutting performance without the need for regrinding. This makes the tool particularly suitable for medium- to high-volume production where reduced non-productive time is a priority. Secure clamping and machining reliability A 25 mm shank and a total length of 135 mm give the cutter the rigidity required for repeatable results in batch production. The moderate mass of 0.423 kg contributes to low spindle load while maintaining stability at typical drilling feeds and speeds. Compatibility with industry-standard indexable plates ensures repeatable seat geometry and consistent cutting edge position, which supports reliable tolerances and surface finish in drilled bores. Flexible insert options and proven compatibility Designed for use with SPMG 07T3 indexable plates, the drill accepts inserts from leading manufacturers such as Taegutec and YG-1, enabling process optimisation through choice of grade and coating. The insert format permits selection of carbide grades and coatings best suited to the workpiece material and cutting conditions, from general-purpose steels to specialised alloys. This flexibility supports faster ramp-up to stable cutting parameters and extends effective tool life through tailored insert selection. Practical considerations for workshop integration The tool is straightforward to integrate into existing toolholders and collets that accept a 25 mm shank. Its indexable design minimises inventory complexity: a small set of spare inserts covers many operating conditions, while the clamping interface reduces the need for specialised regrinding equipment. For production planners, the combination of repeatable geometry and readily available insert options reduces the lead time for tool supply and maintenance. For tailored advice, spare-part planning or supply from our Emmerich distribution hub, contact Metav Werkzeuge for precise specification support and next-step logistics — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U926TM Manufacturer: Teknik Makina Measurements Diameter: 26 mm Overall length: 135 mm Cutting length: 52 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.423 kg Special features Compatible inserts: SPMG 07T3 Suitable insert manufacturers: Taegutec, YG-1 Indexable insert drilling system FAQ What materials is this insert drill suitable for? The Vollbohrer insert drill U926TM from Teknik Makina is primarily intended for steel and common engineering alloys; selection of the correct SPMG 07T3 insert grade determines suitability for harder or more abrasive materials. Which insert format fits this tool? This indexable drill accepts SPMG 07T3 plates; inserts from Taegutec and YG-1 are compatible and recommended for straightforward procurement and grade variety. How deep can holes be drilled with this cutter? The tool provides a cutting length of 52 mm and an overall length of 135 mm, allowing reliable drilling to the specified cutting depth while preserving stability and surface quality. Is the shank suitable for standard toolholders? With a 25 mm shank diameter, the cutter is compatible with holders and collets designed for that shank size; clamping rigidity supports repeatable holemaking in production settings. What are the main advantages of using an indexable insert drill over a solid drill? Indexable systems such as the Vollbohrer (U926TM) enable quick insert replacement, lower reconditioning costs and faster return to nominal cutting performance, which is beneficial in series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise, repeatable drilling with a 26 mm diameter and a long 78 mm cutting length; compatibility with Korloy WCM-0503 inserts ensures fast indexable-insert changes and reliable cycle times—order via Metav Werkzeuge or consult the technical team for integration advice. Solid Drill U162TM – indexable-insert drill, 26 mm diameter, Teknik Makina The Solid Drill U162TM is an indexable-insert solid drill designed for depth-capable drilling where secure clamping and predictable chip control are required Precision 26 mm diameter 78 mm cutting length Compatible with Korloy WCM-0503 inserts 25 mm shank diameter for secure clamping Consistent chip control and deep-hole capability for production runs The U162TM is engineered as an indexable-insert solution to deliver repeatable results when a longer effective cutting length is needed. With a 78 mm cutting length and a 26 mm diameter, the tool provides the reach necessary for deeper pockets and stepped bore operations while maintaining stable chip evacuation. The insert-based approach reduces downtime during tool changes: worn inserts are replaced in seconds rather than requiring whole-tool replacement, which improves throughput and lowers tooling consumption per component. This makes the tool particularly suitable where process stability and short tool-change cycles are priorities Stable holding and geometry that reduce vibration A robust 25 mm shank and an overall length of 161 mm combine to give secure clamping and predictable dynamic behaviour in most common toolholders. The specified shank dimension supports conventional clamping systems and helps to reduce run-out, which directly benefits hole quality and tool life. At a measured weight of 0.494 kg, the assembly balances inertia and rigidity for many machining setups; the result is fewer chatter marks and better surface finish without complex adaptations to the spindle. Clear specification of shank and length simplifies fixture planning and tool setup for production environments Simple integration into workshop stock and maintenance routines Compatibility with Korloy WCM-0503 inserts means readily available cutting edges and a familiar insert geometry for many users, easing inventory planning and ensuring fast replacement. The tool’s modularity supports predictable maintenance cycles: scheduled insert changes and standard clamping checks keep the process lean. Technical teams benefit from documented dimensions—26 mm diameter, 78 mm cutting length, 25 mm shank and 161 mm overall length—when configuring holders or programming cycle depths. For purchasers seeking a pragmatic balance of reach, rigidity and straightforward serviceability, this indexable-insert solution integrates into existing tooling systems with minimal disruption For a tailored recommendation on integrating the Teknik Cutting Tools Solid Drill U162TM into production, contact Metav Werkzeuge for technical consultation and supply options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U162TM Manufacturer: Teknik Cutting Tools Product type: Solid drill (indexable-insert) ECLASS: 21180201 Numbers / Core technical data Diameter: 26 mm Cutting length: 78 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 161 mm Weight: 0.494 kg Designs / Special features Compatible inserts: Korloy WCM-0503 Files: 62de7ec3a9cff922f4703d40, 62de7ddaa9cff922f4703d13 SKU: U162TM FAQ Which insert type fits this drill? The Solid Drill U162TM accepts Korloy WCM-0503 indexable inserts, which are specified for quick replacement and standard insert geometries. What are the main dimensions to consider for toolholding? Key dimensions for mounting and programming are: 26 mm diameter, 25 mm shank diameter, 78 mm cutting length and 161 mm overall length for the U162TM. Is the shank suitable for common clamping systems? Yes, the 25 mm shank of the U162TM is intended for secure clamping in standard holders compatible with that diameter. How does the insert-based system affect maintenance? Using Korloy WCM-0503 inserts allows rapid edge changes for the U162TM, reducing downtime and simplifying spare-part inventories. Can the tool be used for longer cycle production? The U162TM’s combination of a long cutting length and stable shank geometry supports repetitive production cycles where consistent hole quality is required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-compatible design and precise dimensions to streamline holemaking operations; the combination of a 26 mm diameter, 78 mm cutting length and secure 25 mm shank enables consistent results in production environments. Order the tool directly via Metav Werkzeuge or consult Metav's specialists for application advice. Indexable Insert Drill U826TM — 26 mm diameter, 25 mm shank (Teknik Makina) The Indexable Insert Drill U826TM is an insert-style holemaking tool designed for reliable machining in general metalworking, offering long cutting reach and straightforward insert replacement for continuous production use. 26 mm diameter for standard holemaking 78 mm cutting length for deep drilling 25 mm shank for secure clamping Compatible with SPMG 07T3 inserts Steady material removal and optimised chip control for higher productivity The U826TM delivers consistent chip control and stable cutting performance thanks to its extended 78 mm cutting length and proven geometry for insert-mounted drilling. Using SPMG 07T3 indexable inserts reduces non-productive time: worn cutting edges are replaced quickly, which helps to maintain a steady cycle time and reduces the need for full-tool changes. For workshops that value throughput, the tool’s arrangement of flute and insert seating supports predictable chip evacuation and surface finish, translating technical specification directly into measurable process reliability. Secure holding and machine compatibility for accurate hole placement With a 25 mm shank diameter and 56 mm shank length, the tool is designed for robust clamping in standard toolholders, limiting runout and vibration during plunge operations. The drill’s 26 mm diameter and 161 mm overall length balance reach and rigidity, allowing access to deeper features while keeping deflection low. These dimensions are particularly relevant when selecting spindle holders and setting up tool offsets; correct clamping torque and balanced assembly ensure the best repeatability and hole tolerance in series production. Flexible insert sourcing and easy handling to reduce downtime The tool accepts SPMG 07T3 inserts and is compatible with insert ranges from Taegutec and YG-1, giving purchasing teams flexibility to choose grades and coatings best suited to different materials and cutting speeds. At just 0.481 kg, the drill is straightforward to handle during setup, and insert changeovers are rapid compared with resharpening solid drills. For applications where tool inventory and fast changeover are priorities, this arrangement lowers total machining costs through reduced idle time and simplified logistics. For specific material pairings, Metav's consultants can advise on insert grade selection and cutting parameters. For application guidance or to secure supply from stock, contact Metav Werkzeuge — their specialists can advise on insert grades and holder compatibility to match the U826TM to the intended machining task Technical Data Article number: U826TM Manufacturer: Teknik Makina ECLASS: 21180201 Facts Diameter: 26 mm Cutting length: 78 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 161 mm Weight: 0.481 kg Compatibility & Features Designation: Indexable insert drill (Vollbohrer) Compatible inserts: SPMG 07T3 Compatible insert manufacturers: Taegutec; YG-1 FAQ Which inserts fit this drill? The U826TM is specified for SPMG 07T3 inserts; compatible grades from Taegutec and YG-1 can be used depending on material and cutting speed. What are the key dimensions to check for toolholder selection? Check the 26 mm diameter, 25 mm shank diameter and 56 mm shank length; overall length is 161 mm — these figures determine holder choice and overhang. Is the tool suitable for deep-hole operations? The 78 mm cutting length provides extended reach for deeper holes while maintaining stability when clamped correctly, making it suitable for many medium-depth applications. How does insert replacement affect uptime? Indexable inserts such as SPMG 07T3 enable rapid edge changes without removing the whole tool, reducing downtime compared with regrinding solid drills. What is the handling weight during setup? The tool weighs approximately 0.481 kg, allowing safe, ergonomic handling during tool changes and clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact milling solution that combines internal coolant and precise compatibility with 3PKT 1004 indexable inserts for reliable chip control and consistent surface results; order the tool via Metav Werkzeuge or consult our specialists for application advice. Shank Milling Cutter S486-1TM — 26 mm diameter with internal coolant (Teknik Makina) A robust Shank Milling Cutter S486-1TM intended for indexable-insert milling with 3PKT 1004 inserts, offering internal coolant for improved chip evacuation and secure clamping for production workflows Internal coolant for improved chip evacuation Compatible with 3PKT 1004 inserts (Taegutec) 26 mm cutter diameter, 25 mm shank 200 mm total length, balanced mass for stability Productivity gains through controlled chip evacuation and stable geometry The milling body combines an integrated internal coolant channel with a compact cutting geometry to reduce thermal load and support steady cutting conditions. With a 26 mm cutting diameter and 30 mm cutting length, the design promotes effective material removal while maintaining surface consistency. This leads to shorter cycle times and fewer interrupted runs, which is particularly valuable in repetitive workshop and small-batch production environments. The tool’s balanced mass and precise dimensions contribute to repeatable results on compatible machines. Straightforward compatibility and secure insert retention Designed for use with 3PKT 1004 indexable inserts and tested for fit with Taegutec references, the tool body simplifies inventory management when matching inserts and holders. Inserts are secured with a Torx T8 key and M2.5x7 screw, ensuring a stable seat and easy changes during maintenance. The 25 mm shank diameter provides compatibility with standard holders, enabling secure clamping and minimal run-out when the cutter is mounted in conventional collets or shrink-fit systems. Practical dimensions and handling for everyday workshop use With a 200 mm total length and a net mass around 0.773 kg, the cutter offers a balance between reach and rigidity for many routine milling tasks. The moderate overall length reduces deflection risk compared with longer tooling options, while the compact cutting length allows focus on shoulder and slot operations where indexable inserts deliver cost-effective performance. The straightforward mechanical design eases handling during tool changes and inventory checks. How this cutter supports efficiency and serviceability By combining insert interchangeability with integrated coolant distribution and standardised fastening, the tool reduces downtime associated with regrinding or frequent retooling. The construction supports predictable replacement cycles for inserts rather than entire cutters, lowering consumable costs and streamlining maintenance. For technical clarifications or compatibility checks regarding machine interfaces and insert grades, Metav’s advisers can provide targeted guidance to align the tool with specific machining tasks. For specification support and ordering of Teknik Makina cutting tools, contact Metav Werkzeuge for personalised advice and prompt supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S486-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Compatible inserts: 3PKT 1004 Compatible insert manufacturer: Taegutec Core dimensions Cutter diameter: 26 mm Total length: 200 mm Shank diameter: 25 mm Cutting length: 30 mm Weight: 0.773 kg Number of cutting edges: 2 Features & compatibility Internal coolant Torx key: T8 Torx screw: M2.5x7 EClass: 21180806 FAQ Is this cutter compatible with Taegutec 3PKT 1004 inserts? Yes. The Shank Milling Cutter S486-1TM is designed for 3PKT 1004 indexable inserts and is compatible with Taegutec reference inserts for straightforward interchange. Does the tool offer internal coolant supply? Yes. The milling body includes internal coolant to support chip evacuation and thermal control during cutting operations. What are the main dimensions and weight of the tool? The cutter has a 26 mm diameter, 25 mm shank, 30 mm cutting length and 200 mm total length, with a weight of approximately 0.773 kg. How are inserts fixed in the cutter? Inserts are secured using a Torx T8 key and an M2.5x7 screw, providing a stable clamping seat and easy replacement. What is the SKU and manufacturer for ordering? The tool is supplied as SKU S486-1TM by Teknik Makina and is available through Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise indexable-insert compatibility, internal coolant for controlled cutting temperatures and a compact 25 mm shank for secure clamping; order directly via Metav Werkzeuge or consult our specialists for specification matching. Shank milling cutter S489TM — 26 mm diameter with internal coolant (Teknik Makina) Shank milling cutter S489TM designed for indexable-insert milling with BLMP 0904 inserts, offering reliable coolant delivery and straightforward insert replacement for industrial machining. 26 mm cutting diameter for stable machining Internal coolant supply to the cutting zone Compatible with Taegutec BLMP 0904 inserts Secure clamping on a 25 mm shank Precision compatibility for indexable-insert milling This shank milling cutter combines a 26 mm cutting diameter with a holder geometry optimised for BLMP 0904 indexable inserts, enabling consistent chip formation and repeatable results. The tool is engineered for straightforward integration into existing toolholders thanks to its 25 mm shank, which supports secure clamping and minimal runout. Designed by Teknik Makina, the cutter is suitable for a broad range of general milling tasks where indexable inserts are preferred for economical edge changes and predictable tool life. The robust construction and measured mass deliver stability during engagement, helping to reduce chatter and improve surface finish. Improved tool life through directed coolant and efficient cutting edges Internal coolant channels deliver coolant directly to the insert cutting edges, reducing flank and crater wear and improving tool life under demanding conditions. The configuration with 3 cutting edges balances metal removal rate and mechanical stability, allowing efficient material engagement while maintaining cutting consistency. By targeting heat at the cutting zone, the coolant supply supports higher sustained cutting parameters and more predictable maintenance intervals. This results in lower overall machining costs for repetitive production runs and a reduced need for premature insert changes. Practical assembly and maintenance for production environments Maintenance and insert changes are simplified by standard fastenings: the cutter uses M3.5x8.5 Torx screws and a T10 Torx key, facilitating rapid indexable-insert replacement with common workshop tools. The 40 mm cutting length combined with a 150 mm overall length provides adequate reach for many operations while remaining compact enough for secure fixture. Spare parts and replacement inserts from established manufacturers such as Taegutec are compatible with the holder geometry, which eases logistics and reduces downtime. Clear mechanical design and accessible fastening points make routine checks and torque-controlled reassembly straightforward. Suitable uses and workshop advantages Engineered for industrial milling operations that favour indexable solutions, this insert holder performs well in both batch production and mixed-workshop environments. Its balance of internal coolant, sturdy shank diameter and practical cutting geometry supports tasks where controlled chip evacuation and repeatable insert positioning are priorities. Buyers benefit from the combination of compatibility with established insert systems and the backing of a reliable distributor network that emphasises quality assurance and supply reliability. If product matching or application advice is required, technical clarification is available to ensure the tool suits specific machining strategies and machine tool interfaces. Contact Metav Werkzeuge for tailored application advice and order facilitation of this Teknik Makina shank milling cutter S489TM with internal coolant Technical data Article number: S489TM Label: 26mm Schaftfräser BLMP 0904 L150mm mit Innenkühlung Product type: Shank milling cutter Brand: Teknik Makina Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length (shank-side): 40 mm Number of cutting edges: 3 Weight: 0.612 kg Torx screw: M3.5x8.5 Torx key: T10 ECLASS: 21180806 Special features Internal coolant supply Designed for BLMP 0904 indexable inserts Compatible with Taegutec inserts SKU: S489TM Manufacturer: Teknik Makina FAQ Which inserts fit this shank milling cutter? The holder accepts BLMP 0904 indexable inserts; compatibility with Taegutec-manufactured BLMP 0904 inserts is specified for the shank milling cutter S489TM. How is coolant delivered to the cutting zone? Coolant is fed internally via channels within the insert holder body so that cooling is directed at the cutting edge to reduce heat and extend insert life. What fasteners are used for insert clamping? Insert clamping uses M3.5x8.5 Torx screws secured with a T10 Torx key, allowing controlled tightening and straightforward maintenance on the S489TM. What are the key dimensions for mounting and reach? Relevant dimensions include a 25 mm shank diameter, 150 mm overall length and a 40 mm cutting length, giving clear parameters for toolholder selection and reach. Is this tool suitable for high-speed finishing? The combination of internal coolant and a three-edge insert arrangement supports higher sustained cutting parameters; application suitability should be confirmed against specific machine and material requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable clamping and consistent parting performance with a compact 20 mm shank, 3 mm cutting width and compatibility with ZCC 3C ZT.D indexable inserts — combine precision, low vibration and simple integration into existing toolposts. Order the Parting and Grooving Clamp Holder directly via Metav Werkzeuge or ask our consultants for application support. Parting and Grooving Clamp Holder K680TM — 20 mm shank, 3 mm cutting width (Teknik Makina) A robust Parting and Grooving Clamp Holder K680TM engineered for precise turning and grooving tasks on CNC lathes, suited to indexable inserts in the 3C ZT.D family. Compact 20 mm shank for standard toolposts Precise 3 mm cutting width for narrow grooves Compatible with ZCC 3C ZT.D indexable inserts 180 mm overall length for extended reach Stable clamping for repeatable groove quality The holder delivers stable clamping and reduced chatter through a rigid body and defined seating for the insert. With a 20 mm shank and a balanced 180 mm overall length, the design minimises deflection during parting and grooving operations, which directly improves surface finish and repeatability. The arrangement for the insert ensures reliable chip control and consistent engagement depth; less rework and fewer rejected parts result from the improved process stability. Built for compatibility and quick insert changes Compatibility with the ZCC 3C ZT.D insert family and the S20Q shank designation enables quick toolset standardisation across workshops. The clamping concept allows controlled, tool-free indexable insert changes where the insert geometry is matched to a 3 mm cutting width and a cutting height of 35 mm, so set-up times are reduced and machine uptime is increased. This straightforward integration into existing tool holders supports efficient tool management and predictable cycle times. Practical design that reduces downtime Engineered for everyday workshop demands, the holder weighs 0.661 kg, providing a balance between rigidity and manageable handling at the bench. The solid construction and defined seating reduce the need for frequent retightening, lowering maintenance intervals. As part of a wider tooling system, the unit supports reliable batch production and quick changeover, helping to keep production schedules on track while maintaining precision. For secure parting and grooving performance from Teknik Cutting Tools, contact Metav Werkzeuge for specialist advice and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K680TM Manufacturer: Teknik Makina Suitable for inserts: 3C ZT.D (ZCC) Facts Shank diameter: 20 mm Cutting height: 35 mm Cutting width: 3 mm Overall length: 180 mm Diameter: 26 mm Weight: 0.661 kg Special features Bohrstange designation: S20Q Secondary holder designation: 3C-R ZT.D Compatible insert manufacturer: ZCC Intended use: Parting and grooving (indexable inserts) FAQ What insert types fit this clamp holder? The Parting and Grooving Clamp Holder K680TM accepts 3C ZT.D indexable inserts from ZCC; the seating and clamping geometry are matched to that insert family for correct chip flow and secure fixation. Is the holder suitable for standard toolposts on small lathes? Yes, the 20 mm shank and compact form factor of the K680TM are designed to integrate with standard toolposts and holders used in small to medium turning centres. How does the clamping system affect tool change times? The clamping arrangement on this holder facilitates straightforward insert replacement, reducing set-up time compared with dedicated clamp designs and supporting faster tool changes during batch production. Can this holder be used for heavy roughing cuts? The holder is optimised for parting and groove operations with a 3 mm cutting width and is intended for precise cutting and finishing. For heavy roughing, a more massive roughing toolholder would normally be recommended. What are the key dimensional data to check before ordering? Check the 20 mm shank diameter, 180 mm overall length, cutting height 35 mm and the required insert family (3C ZT.D) to ensure compatibility with the machine and insert inventory. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 20 mm shank for stable clamping, a 3 mm cutting width for precise grooves and a 35 mm cutting height for deeper cuts — engineered to keep production consistent. Order the K702TM grooving clamp holder directly via Metav Werkzeuge or consult our specialists for application advice. K702TM Grooving clamp holder — 20 mm shank, 3 mm cutting width (Teknik Makina) A K702TM grooving clamp holder designed for secure clamping of 3C indexable inserts, optimised for precision parting and grooving operations on conventional and CNC lathes Secure clamp for 3C indexable inserts 20 mm shank for standard toolposts 3 mm cutting width for precise grooves Stable clamping for repeatable grooves The holder provides a robust clamping concept that reduces insert movement under load, giving consistent cutting geometry across batches. With a 20 mm shank, the tool integrates with common toolposts and holders for a secure fit, while the 3 mm cutting width is intended for fine grooving and narrow parting tasks. This combination improves dimensional repeatability and reduces rework, which supports efficient shop-floor processes. Geometry tailored for deeper grooving operations A nominal cutting height of 35 mm and an overall length of 180 mm offer the clearance and reach required for a range of turned component profiles. The taller cutting height allows the cutting edge to engage material at the correct centreline on many setups, while the 180 mm length balances reach and rigidity. These dimensions help maintain a stable cut path and reduce the tendency for chatter during moderate-depth grooving operations. Compatibility that simplifies tooling choices Designed for use with 3C indexable inserts and explicitly compatible with ISCAR insert geometries, the holder reduces complexity when specifying consumables. The tool is identified by shank designation S20Q and clamp holder designation 3C‑R GRP, enabling straightforward matching with existing insert stocks and holders. This compatibility streamlines ordering and minimises downtime when inserts are changed. Compact mass and workshop handling advantages Weighing 0.463 kg, the holder combines manageable handling with sufficient mass to dampen minor vibrations. Its nominal diameter of 26 mm and standardised interface mean straightforward mounting and replacement, helping to keep set-up times short. The compact design supports flexible placement on the turret or toolpost without excessive overhang, aiding both manual and automated lathe applications. Contact Metav Werkzeuge for tailored advice on Teknik Makina’s K702TM grooving clamp holder and to arrange delivery or a detailed suitability check from our Emmerich team Technical Data SKU: K702TM Manufacturer: Teknik Makina Product: grooving clamp holder ECLASS: 21181005 Dimensions & weights Shank diameter: 20 mm Overall length: 180 mm Diameter: 26 mm Cutting height: 35 mm Cutting width: 3 mm Weight: 0.463 kg Compatibility & features Compatible with ISCAR 3C indexable inserts Suitable insert type: 3C Tool shank designation: S20Q Clamp holder designation: 3C-R GRP Intended use: grooving / parting operations FAQ Which insert types fit this holder? The K702TM grooving clamp holder accepts 3C indexable inserts and is specified for compatibility with ISCAR 3C insert geometries. What shank diameter is required for mounting? Mounting requires a 20 mm shank interface, matching the holder's shank diameter for secure clamping in standard toolposts. What are the cutting width and cutting height specifications? The holder supports a 3 mm cutting width and a 35 mm cutting height, suited to fine grooving and deeper parting tasks. What is the overall length and mass of the tool? Overall length is 180 mm and the tool weighs 0.463 kg, balancing reach with rigidity for stable cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 2 mm cutting width, a 35 mm cutting height and a compact overall length of 180 mm to achieve stable, repeatable parting operations. Order the part directly via Metav Werkzeuge or ask our consultants for application advice. Parting clamp holder K602TM — Parting/grooving clamp holder, 2 mm cutting width (Teknik Makina) The parting clamp holder K602TM is a robust clamp holder engineered for mechanical parting and grooving on lathes, compatible with 2C MGM indexable inserts and designed for reliable production use. Suitable for 2C MGM inserts 2 mm cutting width for fine parting 35 mm cutting height for deep cuts ISO shank S20Q 2C‑R compatible Precise, vibration‑resistant parting for production turning The K602TM holder delivers consistent results through a compact geometry that balances rigidity and accessibility. With a 2 mm cutting width and a 35 mm cutting height, the holder is engineered to perform clean parting cuts and narrow grooving tasks while maintaining tool stability. The sturdy shank Ø20 mm and a moderate overall length of 180 mm reduce overhang, which in turn lowers vibration and improves surface finish. Compatibility with Korloy insert geometries (2C MGM) enables use of widely available indexable inserts, simplifying tool management and replacement in busy workshops. Fast set-up and broad compatibility to keep machines productive The clamp design and MGM shank interface allow straightforward mounting and secure clamping of inserts, helping to minimise downtime during tool changes. The holder’s ISO shank designation S20Q 2C‑R ensures predictable fitment where ISO shank codes are specified, enabling quick integration into existing tooling setups. This results in measurable efficiency gains: fewer tool changes, shorter set-up times and more consistent cycle times. Technical operators benefit from clear, standardised interfaces that make planning and inventory simpler across multiple machines. Built for workshop reliability with expert supply and advice Weighing 0.44 kg, the tool offers a balance between mass for damping and a manageable weight for rapid handling. The compact design supports routine and repeat operations in small to medium series production without compromising repeatability. Backed by Metav’s quality filter in Emmerich and a wide distribution of precision tooling, this clamp holder is positioned as a dependable component in the tooling line‑up. Metav’s established supply chain and technical know‑how provide added confidence that parts arrive verified and ready for use. For a production‑grade clamp holder from Teknik Makina or technical guidance on integrating the K602TM into existing turning operations, contact Metav Werkzeuge for personalised advice and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K602TM Manufacturer: Teknik Makina Product: Parting clamp holder Core data Overall length: 180 mm Diameter: 26 mm Shank diameter: 20 mm Cutting height: 35 mm Cutting width: 2 mm Weight: 0.44 kg Features For inserts: 2C MGM Compatible with Korloy inserts ISO shank designation: S20Q 2C‑R Shank type: MGM FAQ What inserts fit this clamp holder? The K602TM clamp holder accepts 2C MGM indexable inserts and is specified for Korloy geometries marked as compatible with that insert form. Is the shank suitable for common turret fittings? Yes — the holder is specified with an ISO shank designation S20Q 2C‑R and a shank diameter of 20 mm, matching many standard turret and boring bar interfaces. What cutting width and cutting height does the holder provide? The tool provides a 2 mm cutting width and a 35 mm cutting height, suitable for fine parting and deeper grooving work in turning applications. Can this holder reduce vibration during parting operations? The compact overall length (180 mm) and sturdy shank Ø20 mm contribute to reduced overhang and improved damping, which helps lower vibration and enhances surface finish. Is technical assistance available for tool selection and setup? Yes — Metav Werkzeuge can advise on integration, insert selection and setup parameters for the K602TM to match specific machine and material requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com