Gibt es einen Hahn und Kolb Online Shop?

Turning Holder MTJNL 2020 by Teknik Makina A robust Turning Holder designed for TN-- 1604 indexable inserts, engineered for precise left-hand turning in machining applications. Fits TN-- 1604 Indexable Inserts Overall Length 125 mm for stable setup 93° Cutting Angle for accurate chip control 20 mm Shank: compact and rigid Left-hand Cutting Direction for specialized turning Precision and Rigidity for Accurate Turning The Turning Holder combines a compact 20 mm Shank with a 25 mm Cutter Head Width to deliver high Rigidity and reproducible results in demanding setups. The holder's 125 mm Overall Length balances reach and stability, reducing Vibration during operation and promoting consistent Tool Life. The 93° Cutting Angle supports controlled chip flow, which helps achieve repeatable surface quality on each workpiece. Fast Insert Changes and Clear Compatibility Designed specifically for TN-- 1604 indexable inserts, the holder uses the ISO designation MTJNL 2020 and secondary code K16 to ensure straightforward tool selection. The mounting concept enables secure clamping and rapid index changes, lowering setup time. For users unfamiliar with insert codes: TN-- 1604 denotes the insert family and size, making it simple to match cutting grades and geometries for different materials. Optimised for Left-hand Turning and Chip Management With a dedicated Left-hand Cutting Direction and a cutting height of 35 mm, this toolholder is tailored to operations that require specific tool orientation and chip evacuation paths. The resulting chip control helps protect the Insert and Workpiece by minimizing unwanted contact and re-cutting, which supports longer intervals between index changes and reduces downtime for machining centres that run serial operations. Who benefits and where to get support Workshops and job shops that require reliable clamping for indexable tooling will find this holder a practical choice thanks to its modest 0.429 kg Weight and compact footprint. The product's clear specifications simplify integration into existing tool inventories and fixtures. If there is uncertainty whether this Turning Holder fits a particular machine or application, Teknik Makina products are supported by METAV Werkzeuge, which provides expert consultation and technical assistance. Choose Teknik Makina’s Turning Holder MTJNL 2020 for dependable clamping and predictable machining results — for personalised advice or purchase support contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Bezeichnung: Turning Holder Marke: Teknik Makina SKU: D332TM Compatible Inserts: TN-- 1604 Overall Length: 125 mm Weight: 0.429 kg ISO Designation: MTJNL 2020 Secondary Designation: K16 Shank Width: 20 mm Height: 20 mm Cutter Head Width: 25 mm Cutting Height: 35 mm Cutting Angle: 93° Cutting Direction: left GTIN: 4061905151149 Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder MTJNL 2020 by Teknik Makina? The Turning Holder MTJNL 2020 is compatible with TN-- 1604 indexable inserts; matching the insert size and geometry to the holder ensures secure clamping and correct cutting geometry. Can the Turning Holder MTJNL 2020 be used for right-hand turning? This particular Turning Holder is specified for left-hand Cutting Direction; for right-hand applications a holder with the corresponding orientation should be selected. How does the 93° Cutting Angle affect machining performance with the Turning Holder? A 93° Cutting Angle provides controlled chip formation and favorable contact conditions, which improve surface finish and help extend Insert Life under appropriate cutting parameters. Who can I contact for fitting advice for the Turning Holder? For technical guidance and to confirm suitability, contact METAV Werkzeuge — they offer comprehensive consultation for Teknik Makina tooling at info@metav-werkzeuge.com or +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D332TM","sku":"D332TM","mpn":"MTJNL 2020","gtin13":"4061905151149","name":"Klemmhalter MTJNL 2020 93° TN-- 1604","description":"Turning holder for TN-- 1604 indexable inserts, 125 mm overall length, 93° cutting angle, left-hand cut, aluminium-compatible robust design.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/01/8d/e2/62/62e28d01a9cff922f4706cc5/d332tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3b/7e/de/62/62de7e3b33927e49dbf32739/d332tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d9/7e/de/62/62de7ed9a9cff922f4703d49/d332tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Type","value":"Turning Holder"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"TN-- 1604"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Left"},{"@type":"PropertyValue","name":"Weight","value":"0.429 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"MTJNL 2020"},{"@type":"PropertyValue","name":"Shank Designation","value":"K16"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with TN-- 1604 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93°."}},{"@type":"Question","name":"Which cutting direction is supported?","acceptedAnswer":{"@type":"Answer","text":"This holder is configured for left-hand cutting."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Indexable Inserts TN-- 1604"},{"@type":"Thing","name":"MTJNL 2020"}],"mentions":[{"@type":"Thing","name":"K16 Shank"},{"@type":"Thing","name":"125 mm Overall Length"},{"@type":"Thing","name":"93° Cutting Angle"}]}]}

Turning Holder (Clamping Holder for Indexable Inserts) by Teknik Makina The Turning Holder is a precision clamping holder designed for TN-- 2204 indexable inserts, enabling stable left-hand turning operations in workshop and production environments. Compatible with TN-- 2204 indexable inserts 125 mm Overall length for extended reach 93° Cutting angle for predictable chip flow 20 × 20 mm Shank for secure mounting MTJNL 2020 ISO designation for standardized fitting Secure clamping for consistent cutting results The clamping system is engineered to hold TN-- 2204 inserts firmly in place, delivering secure clamping and consistent cutting geometry. This reliability reduces insert micro-movements and helps maintain repeatable part dimensions during series turning. The ISO designation MTJNL 2020 ensures compatibility with common insert families, simplifying tool setup and minimizing downtime for tool changes. Rigid dimensions to reduce vibration and improve surface finish With a 125 mm overall length and a compact 20 mm shank cross-section, the holder balances reach and stiffness to limit chatter on medium-duty turning tasks. The 25 mm cutting-head width provides a stable support area for the insert, which contributes to improved surface finish and dimensional accuracy even when machining longer workpieces. This dimensional stability is particularly beneficial for workshops that require predictable results across multiple setups. Geometry optimized for left-hand turning and chip control The holder's 93° cutting angle and designated left-hand cutting orientation create predictable cutting forces and favorable chip direction for many turning operations. This geometry supports controlled chip evacuation, reducing the risk of recutting and easing coolant and chip management at the machine. The design therefore helps operators achieve consistent cycle times and tool life when paired with the appropriate insert grade. Designed for professionals and versatile turning tasks This clamping holder is suited to machinists, job shops and production lines that use TN-- 2204 inserts and require a dependable tool-holding solution. The compact profile and standardized ISO designation make the holder easy to integrate into existing tooling systems, while the robust build supports repeating production tasks where stability and repeatability matter most. Practical compatibility notes and handling tips Compatible inserts are specified as TN-- 2204, and the holder is referenced under the ISO code MTJNL 2020 with secondary designation K22, which helps verify fitment before procurement. For optimal results, ensure the insert seat and clamp surfaces are clean and free of debris during assembly, and verify the left-hand orientation relative to your machine setup to avoid setup errors. For reliable left-hand turning choose the Teknik Makina Turning Holder — METAV Werkzeuge provides expert advice to confirm suitability for your application and to assist with technical questions, contact: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Turning Holder Brand: Teknik Makina SKU: D338TM Compatible Inserts: TN-- 2204 Suitable for: Indexable Inserts TN-- 2204 Overall Length: 125 mm ISO Designation: MTJNL 2020 Secondary Designation: K22 Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Cutting Angle: 93° Cutting Direction: Left Condition: New GTIN: 4061905151170 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina? The Teknik Makina Turning Holder is designed for TN-- 2204 indexable inserts; check that your inserts match this designation and the ISO code MTJNL 2020 to ensure proper fit. Is the Turning Holder suitable for heavy-duty turning? The Turning Holder offers a rigid 20 × 20 mm shank and a 125 mm length that balance reach and stiffness; for heavy-duty operations evaluate machine stability and cutting parameters—METAV Werkzeuge can advise on matching holder, insert grade and cutting data. What does left-hand cutting mean for setup with the Turning Holder? Left-hand cutting indicates the holder is arranged so the tool cuts when feeding from right to left relative to the workpiece; verify the orientation on your lathe to ensure correct chip flow and safe operation. Can METAV Werkzeuge help determine if the Turning Holder fits my machine? Yes, METAV Werkzeuge provides competent consultation for fitting the Turning Holder into your tool system—contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support. 93° MTJNL 2020 Turning Holder For TN-- 2204, 125 Mm Length, Left - Teknik Makina

Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina Turning Holder SDJC for DCMT Indexable Inserts offers a compact, robust solution for precision turning operations with DCMT 0702 inserts Compatible with DCMT 0702 indexable inserts 110 mm Overall Length for stable support ISO Designation SDJCL 1010 for easy identification 93° Cutting Angle for Left-Hand Turning Compact 10 x 10 mm Shank for versatile mounting Precision Fit for Indexable Inserts and Stable Turning The Turning Holder delivers a secure clamping solution designed specifically for DCMT 0702 indexable inserts. Its ISO Designation SDJCL 1010 ensures straightforward matching with Insert families, reducing setup time and avoiding mix-ups. With a Compact Shank of 10 mm by 10 mm and a Cutting Head Width of 12 mm, the toolholder provides consistent support and Repeatable Seating, which improves Surface Finish with minimal vibration during low- to medium-duty Turning operations. Designed Geometry That Supports Accurate Left-Hand Cutting A Cutting Angle of 93° and a Left-hand Cutting Direction make this holder well suited for operations requiring precise undercutting or facing from the opposite orientation. The engineered geometry keeps the Insert at the optimal engagement angle, which helps to control Chip Flow and extend Insert Life. For workshops that alternate between orientations, the predictable toolpath and consistent Edge Contact reduce regrinding and Adjustments. Compact Dimensions for Versatile Workshop Use With an Overall Length of 110 mm and a compact footprint, the toolholder integrates easily into tight setups and tooling towers. The modest size enables closer tool spacing on turrets and facilitates multi-tool stations without sacrificing rigidity. This makes the holder a practical choice for Job Shops and Production Cells where Machine Time and Setup Flexibility are critical. Material Handling and Suitable Applications Manufactured to meet practical demands in turning, the holder is intended for general steel and non-ferrous machining with DCMT 0702 Inserts. The robust clamp design ensures secure fixation of the Insert under intermittent loads. When paired with properly selected grades of indexable inserts, the holder supports consistent performance for finishing and light to moderate roughing operations, offering a balance between Accessibility and Durability. Trust Teknik Makina’s Turning Holder for dependable workshop precision — for expert technical advice and to confirm suitability for your applications contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Information Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D360TM For Indexable Inserts: DCMT 0702 ISO Designation: SDJCL 1010 Alternate Designation: J07 Overall Length: 110 mm Width (Shank): 10 mm Height (Shank): 10 mm Cutting Head Width: 12 mm Cutting Height: 15 mm Cutting Angle: 93° Cutting Direction: Left GTIN: 4061905153280 Condition: New Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina and what sizes are supported? The Turning Holder from Teknik Makina is specified for DCMT 0702 indexable inserts; its ISO Designation SDJCL 1010 and 12 mm Cutting Head Width are matched to that Insert type to ensure correct seating and clamping. Can the Teknik Makina Turning Holder be used for right-hand cutting as well? The Teknik Makina Turning Holder is manufactured for a Left-Hand Cutting Direction with a 93° Cutting Angle; using it for right-hand operations would require a holder designed for the opposite Cutting Direction to maintain geometry and tool performance. How does the compact size of the Turning Holder benefit my machine setup? The compact 10 x 10 mm Shank and 110 mm Overall Length of the Turning Holder allow tighter tool spacing on turrets and better integration in multi-tool setups, improving Setup Flexibility and reducing Machine Downtime. Who can I contact for technical advice about the Turning Holder by Teknik Makina? For application support or further technical data regarding the Turning Holder by Teknik Makina, METAV Werkzeuge offers comprehensive consultation — reach out via info@metav-werkzeuge.com or call +49 2822 7131930. 93° SDJCL 1010 Turning Holder for DCMT 0702 Indexable Inserts, 110mm - Teknik Makina

Turning Holder (Klemmhalter) – SDJC for DCMT Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a SDJC clamping holder designed for DCMT indexable inserts, providing secure seating and fast insert changes for precision turning applications. Fits DCMT 0702 and DCMT 11T3 inserts Flat SDJC design for stable clamping 93° cutting angle for consistent surface finish 110 mm overall length for common lathe setups Quick screw release for fast insert replacement Precision fit and compatible design for reliable turning The flat SDJC Turning Holder from Teknik Makina is engineered to accept ISO DCMT 0702 and DCMT 11T3 indexable inserts, ensuring a precise and repeatable seat for each insert. A reliable fit reduces micro-movement and vibration during cutting, which directly improves surface quality and dimensional accuracy. The holder’s ISO designation SDJCR 1010 guarantees compatibility with standard toolposts and simplifies tool management in busy workshops. Faster cycles and lower setup times through practical features A 93° cutting angle supports consistent chip flow and enables predictable cutting forces on right-hand operations, while the holder’s accessible clamping screw allows for a quick insert change when a cutting edge is worn. With an overall length of 110 mm, the component integrates into many common lathe configurations without extensive adjustment, helping to cut setup time and increase spindle uptime—two decisive factors for productive machining. Versatile application across materials and users with simple guidance This SDJC clamping holder is suited for professional machinists, job shops and CNC turning operations that work with a range of steels and non-ferrous alloys. For users less familiar with indexable systems: Indexable inserts are replaceable cutting tips that attach to a holder; when one edge wears, the insert is rotated or replaced instead of discarding the whole tool, which simplifies maintenance and inventory. The holder’s flat design supports consistent tool geometry and is particularly useful where a low-profile cutting head is required. Cost efficiency, maintenance and sustainability advantages Replacing only worn inserts rather than entire tools reduces material waste and operating expenses. The robust clamping and stable seating of the holder extend the usable life of inserts by limiting vibration and uneven wear, contributing to longer tool life and fewer interruptions. Standardized compatibility with DCMT inserts also helps reduce the number of distinct toolholders and inserts kept in stock, lowering complexity and inventory costs over time. Strong recommendation: Choose Teknik Makina’s Turning Holder (Klemmhalter) for dependable, precision turning—if you need technical advice or confirmation that this holder meets your machining requirements, METAV Werkzeuge provides expert consultation and support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Details Bezeichnung: Klemmhalter SDJC für DCMT Wendeplatten, flache Ausführung Marke: Teknik Makina SKU: D452TM Passende Wendeplatten: DCMT 0702 Passende Wendeplatten: DCMT 11T3 Gesamtlänge: 110 mm Gewicht: 0.103 kg ISO Bezeichnung: SDJCR 1010 Bezeichnung 2: J07-F Breite: 10 mm Höhe: 10 mm Schneidkopf Breite: 10 mm Schnittwinkel: 93° Schnitt­richtung: right GTIN: 4061905153440 Verfügbarkeit: in Stock Zustand: new ECLASS: 21181004 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder (Klemmhalter) from Teknik Makina? The Turning Holder by Teknik Makina is compatible with ISO DCMT 0702 and DCMT 11T3 indexable inserts; these standard insert sizes seat securely in the SDJC flat holder for stable machining. Can the Turning Holder (Klemmhalter) be used for different materials and operations? Yes, the Teknik Makina Turning Holder is suitable for a wide range of turning tasks on steels and non-ferrous materials; selection of the correct DCMT insert grade and geometry determines optimal performance for each workpiece material. How does the 93° cutting angle affect results with the Turning Holder (Klemmhalter)? The 93° cutting angle on the Teknik Makina holder promotes predictable chip flow and consistent contact conditions, which helps achieve repeatable surface finish and dimensional control in right-hand turning applications. Who can advise if this Turning Holder (Klemmhalter) meets my machine setup? If you are unsure whether the Teknik Makina Turning Holder fits your tooling or process, METAV Werkzeuge offers specialist support and can provide additional technical data; contact them at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice. 93° SDJCR 1010 Turning Holder For DCMT 0702 Indexable Inserts, 110mm - Teknik Makina

Kompaktes Fazit: Die Kombination aus Internal Cooling, passender Aufnahme für VBMT 1103 Einsätze und dem präzisen 93° Cutting Angle sorgt für zuverlässige Dreharbeiten mit hoher Standzeit. Bestellen Sie den Clamping Holder direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an, falls technische Details zu Ihrer Anwendung geklärt werden sollen. Clamping Holder AP547TM — SVJB for VBMT Indexable Inserts The Clamping Holder AP547TM is a right-hand, flat-design toolholder engineered for secure clamping of VBMT 1103 inserts and for use in precision turning applications Compact flat design for space-saving set-ups Suitable for VBMT 1103 indexable inserts Integrated Internal Cooling for chip control 93° Cutting Angle for stable chip formation Precise clamping and compatibility that reduces set-up time The flat-design Clamping Holder combines a compact Shank with a secure clamping interface, enabling fast tool changes and repeatable Seating. Designed specifically for VBMT 1103 Indexable Inserts, the toolholder delivers consistent Contact and reliable Cutting Performance in right-hand turning. The ISO designation SVJBR 1010 and Shank Reference J11-F-IK make it easy to match with existing toolposts and adaptors, reducing downtime during tool replacement. Integrated Internal Cooling improves tool life and surface finish Equipped with Internal Cooling, this toolholder channels coolant directly to the Insert Seat, promoting efficient Chip Evacuation and reducing Thermal Load at the Cutting Edge. The directed coolant flow helps maintain cutting-edge integrity over longer runs, which can extend Insert life and improve surface quality on the Workpiece. For operations that require controlled heat management, Internal Cooling is a decisive advantage in both roughing and finishing passes. Durable construction and straightforward maintenance Manufactured with precision Metalworking and a compact form, the holder resists deformation under cutting loads and keeps the clamping torque stable over repeated cycles. The clamping screw uses a defined Torx Screw specification (M2.5x6.5) and is tightened with a Torx Key T8, simplifying maintenance and ensuring repeatable torque values. The flat configuration and a Cutting Height of 30 mm support stable engagement and make inspection and regripping straightforward during shift changes. Suitable applications and operational benefits This holder is optimised for turning tasks where space is limited or where a flat-profile toolholder provides better access to the Workpiece. With a Cutting Angle of 93°, it is particularly effective where clearance and chip flow management are critical. Use it for serial production runs, short-run batches and job-shop work where quick Insert swaps and coolant-assisted machining improve throughput and component consistency. Strong recommendation: For reliable right-hand turning with internal coolant support, choose the Teknik Makina Clamping Holder AP547TM—available from Metav Werkzeuge; technical advice and supply are provided directly from Emmerich. Product Details Article number: AP547TM Brand: Teknik Makina Designation: Clamping Holder SVJB for VBMT Indexable Inserts — flat version ISO Designation: SVJBR 1010 Shank: J11-F-IK Cutting Direction: Right Facts Width: 10 mm Height: 10 mm Cutting-Head Width: 10 mm Cutting Height: 30 mm Total Length: 110 mm Total Height: 10 mm Cutting Angle: 93° Weight: 0.07 kg Features Internal Cooling: coolant channel to the Insert Seat for improved chip evacuation and thermal control Suitable for Inserts: VBMT 1103 (Indexable Carbide Insert designation) Torx Screw: M2.5x6.5 (fastening screw for clamp) Torx Key: T8 (recommended tightening tool) Flat Design Right-hand Cutting Direction FAQ How does the internal cooling of the AP547TM benefit machining? The AP547TM’s Internal Cooling channels coolant directly to the Insert Seat, which improves Chip Evacuation and reduces Heat at the Cutting Edge, helping to extend Insert life and enhance Surface Finish during both roughing and finishing. Which inserts fit this holder? This Clamping Holder is designed for VBMT 1103 Indexable Inserts; the geometry and clamp position secure the Insert for consistent Cutting Performance in right-hand turning applications. What screw and key are required for clamping the insert? The clamping assembly uses a Torx Screw M2.5x6.5 tightened with a Torx Key T8 to ensure repeatable clamping torque and straightforward maintenance. Is the AP547TM suitable for tight or space-restricted setups? Yes, the flat-design Clamping Holder with a compact Width and Height of 10 mm is specifically suited to space-restricted toolpositions and applications where minimal overhang is required. Can this holder be used for both roughing and finishing? With its 93° Cutting Angle and Internal Cooling, the AP547TM is versatile enough for both roughing passes that demand robust chip control and finishing passes that require improved surface quality. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Turning Holder SVJB for VBMT Indexable Inserts by Teknik Makina The Turning Holder SVJB for VBMT Indexable Inserts is a precision tool designed for secure clamping of VBMT 1103 inserts in right-hand turning applications. Turning Holder SVJBR 1010 for VBMT 1103 inserts 110 mm overall length for stable setup Right-hand Cutting with 93° Cutting Angle 12 mm Cutting Head Width for firm insert support Compact 10 × 10 mm shank for tight tool posts Robust Design for Reliable Clamping and Long Tool Life The holder is engineered for consistent performance under demanding conditions. The combination of a rigid shank and a reinforced Cutting Head ensures secure seating of VBMT 1103 inserts, reducing vibration and improving Surface Finish. This stability directly translates into longer tool life and fewer re-setups, so workshops benefit from higher uptime and predictable results. Precise Cutting Geometry for Controlled Machining A defined 93° Cutting Angle and Right-hand Cutting orientation enable reliable chip flow and predictable tool engagement during turning operations. These geometric features support accurate Depth of Cut control and contribute to repeatable Dimensional Accuracy, which is particularly important for series production and tight-tolerance components. Built for Professional Workshops and Toolrooms Designed with a compact 10 × 10 mm shank and a 110 mm overall length, this holder suits constrained toolposts and tight setups without sacrificing rigidity. It is aimed at machinists and maintenance technicians who require dependable indexable tooling for lathe work, offering straightforward handling and fast insert changes to keep machining cycles efficient. Clear ISO Identification and Compatibility Explained The ISO designation SVJBR 1010 indicates the holder style and clamping arrangement; this matches the commonly used VBMT 1103 insert form factor to ensure correct seating and orientation. The 12 mm Cutting Head Width and a Cutting Height of 21 mm are specified to help verify fitment in existing tool systems and to simplify tool selection for less experienced users. Secure superior turning results with the original Teknik Makina Turning Holder — contact METAV Werkzeuge for expert advice and tailored assistance via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data Bezeichnung: Turning Holder Brand: Teknik Makina SKU: D230TM Compatible Indexable Inserts: VBMT 1103 Overall Length: 110 mm ISO Designation: SVJBR 1010 Secondary Designation: J11 Shank Width: 10 mm Shank Height: 10 mm Cutting Head Width: 12 mm Cutting Height: 21 mm Cutting Angle: 93° Cutting Direction: Right GTIN: 4061905153600 Weight: 0.097 kg Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Teknik Makina Turning Holder is designed for VBMT 1103 indexable inserts; the holder's ISO designation SVJBR 1010 ensures correct seating and orientation for safe, repeatable clamping. Is this holder suitable for right-hand turning operations? Yes, the Turning Holder from Teknik Makina is specified for right-hand cutting and features a 93° Cutting Angle to support controlled chip evacuation and consistent cutting results. Can the Teknik Makina Turning Holder be used in compact toolposts? With a compact 10 × 10 mm shank and a total length of 110 mm, the Turning Holder is suitable for tight toolposts while maintaining the rigidity needed for precision turning. Who can provide technical advice or help selecting the correct holder? METAV Werkzeuge offers expert consultation for the Teknik Makina Turning Holder and related tooling; contact their team at info@metav-werkzeuge.com or call +49 2822 7131930 for assistance and additional technical data. 93° SVJBR 1010 Turning Holder for VBMT 1103, 110mm Length - Teknik Makina

Turning Holder — Clamping Holder for VBMT 1103 Inserts by Teknik Makina Turning Holder is a precision clamping holder designed for VBMT 1103 indexable inserts, engineered for right-hand turning operations in workshop and production environments. For VBMT 1103 Indexable Inserts 110 mm Overall Length ISO SVJBR 1212 Designation Right-hand Cutting Direction, 93° Angle 12 × 12 mm Shank with 16 mm Head Width Built for Rigidity and Precise Clamping Designed with a focus on Rigidity and stable tool engagement, this clamping device provides a secure interface between Insert and Toolpost. The robust Shank dimensions (12 × 12 mm) and a 16 mm Cutting Head Width deliver consistent contact and reduce vibration, which improves Surface Finish and Tool Life. Users benefit from fewer interruptions and more predictable machining results. Seamless Fit with VBMT 1103 Indexable Inserts Compatibility is straightforward: the holder accepts VBMT 1103 indexable inserts and carries the ISO designation SVJBR 1212, ensuring standardised mounting and orientation. This match guarantees correct seat and clamp geometry for efficient force transfer. For workshops that switch inserts frequently, the standardised interface simplifies tool setup and reduces changeover time. Optimised for Right-Hand Turning and Production Use With a 93° Cutting Angle and a Right-hand Cutting Direction, the toolholder is tailored to common turning tasks on lathes and CNC turning centres. Precision manufacturing environments will value the consistent cutting geometry that supports repeatable part quality. The overall length of 110 mm balances stiffness and reach, making the holder suitable for both short-turning operations and medium-reach applications. Plain Language: What the Key Terms Mean and How to Use Them If some terms are unfamiliar, here is a brief explanation: ISO SVJBR 1212 denotes the holder form and clamping interface; VBMT 1103 refers to the insert shape and size; Right-hand means the cutting action proceeds from left to right when viewed from the tool side. For secure installation, ensure the Insert seats fully in the pocket and the Clamping Screw is tightened to the recommended torque; this prevents chatter and uneven wear. We recommend Teknik Makina’s Turning Holder for reliable production turning — for technical questions or personalised advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D232TM For Indexable Inserts: VBMT 1103 ISO Designation: SVJBR 1212 Secondary Designation: J11 Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 16 mm Cutting Height: 21 mm Cutting Direction: Right Cutting Angle: 93° Weight: 0.141 kg GTIN: 4061905153617 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which orientation is required? The Turning Holder by Teknik Makina is designed for VBMT 1103 indexable inserts and is configured for right-hand cutting; this ensures correct seating and cutting geometry when used in standard right-hand turning operations. How long is the holder and what shank size does the Teknik Makina Turning Holder have? The Teknik Makina Turning Holder has an overall length of 110 mm and a shank dimension of 12 × 12 mm, offering a compact yet rigid solution for many turning setups. What does ISO SVJBR 1212 indicate for this clamping holder? ISO SVJBR 1212 describes the holder’s form and clamping interface; for users, that means standardised fitment and predictable alignment with VBMT 1103 inserts, supporting consistent machining results. Where can I get technical advice or support for the Turning Holder by Teknik Makina? For specialised guidance on the Turning Holder, METAV Werkzeuge provides expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) for assistance. 93° SVJBR 1212 Turning Holder for VBMT 1103, 110mm Length, Right - Teknik Makina

Introducing Turning Holder — Clamp Holder for VCMT/DCMT Inserts by Teknik Makina The Turning Holder is a clamp holder designed for VCMT and DCMT indexable inserts, offering internal cooling and a precise 93° cutting angle for reliable metalworking performance. Clamp holder with internal cooling Compatible with DCMT 11T3 and VCMT inserts Precise 93° cutting angle for consistent surfaces Compact design: 150 mm overall length Stable SVJCR 1616 mounting for repeatable accuracy Precision and Stability that Reduce Rework A robust Clamp Holder delivers the foundation for accurate turning operations. Crafted to hold VCMT and DCMT indexable inserts securely, this holder minimises vibration and ensures repeatable positioning of the cutting edge. The result is improved surface finish and reduced scrap rates, which helps maintain process quality during serial production runs. Internal Cooling to Extend Tool Life Built-in Internal Cooling channels deliver coolant directly to the cutting zone, improving chip evacuation and reducing thermal load on the insert. This targeted coolant feed reduces flank wear and can extend the service intervals of the cutting edges, so fewer tool changes are required and uptime increases. Fast Insert Changes and Wide Compatibility Designed for quick handling, the clamp enables rapid loosening and fastening of inserts, making routine swaps straightforward. Compatibility with DCMT 11T3, VCMT 1103 and VCMT 1604 inserts gives versatility across different machining tasks, allowing the same holder to be used for varied geometries and materials without extensive retooling. Suitable Applications and Who Benefits This tool is aimed at machinists and workshops that require dependable turning performance for small to medium components. The compact 150 mm length and 25 mm cross-section make it suitable for operations where space is limited but precision is essential. Manufacturers seeking stable clamping and consistent results will find this holder a practical addition to their tooling set. Choose Teknik Makina’s Turning Holder for dependable accuracy and contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or +49 2822 7131930 — WhatsApp: +49 170 2837271 Bezeichnung: Klemmhalter SVJC für VCMT Wendeplatten Manufacturer: Teknik Makina SKU: AP520TM Suitable Inserts: DCMT 11T3, VCMT 1103, VCMT 1604 ISO designation: SVJCR 1616 Overall length: 150 mm Width: 25 mm Height: 25 mm Cutting head width: 32 mm Cutting angle: 93° Cutting direction: left Cutting height: 35 mm Weight: 0.735 kg Condition: new Availability: in Stock GTIN: 4061905052422 Torx key: T8 Torx screw: M2,5x6,5 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which materials can I machine with it? The Turning Holder by Teknik Makina fits DCMT 11T3 and VCMT insert types such as VCMT 1103 and VCMT 1604, and it is suitable for a wide range of ferrous and non-ferrous machining tasks where these inserts are recommended. Does the Teknik Makina Turning Holder provide coolant delivery and how does that affect performance? Yes, the Teknik Makina Turning Holder features Internal Cooling that directs coolant to the cutting edge, improving chip evacuation and reducing tool temperature for longer insert life and more consistent machining results. How simple is it to change inserts on the Teknik Makina clamp holder? Changing inserts on this clamp holder is straightforward: screws are easy to access and the design supports quick insert exchange, helping to reduce machine downtime and speed up tool maintenance routines. Can METAV Werkzeuge provide technical support for choosing the right holder variant? METAV Werkzeuge offers comprehensive advice for tooling selection; contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations regarding the Turning Holder and compatible inserts. 93mm SVJCR 1616 Clamp Holder for VCMT/DCMT Inserts, Internal Coolant, 150mm - Teknik Makina

Turning Holder SVJCL 1010 for VCMT 1103 Indexable Inserts by Teknik Makina Turning Holder SVJCL 1010 is a robust lathe tool holder designed for secure clamping of VCMT 1103 indexable inserts, offering precision turning for workshop and industrial applications. Secure clamping for VCMT 1103 inserts 110 mm Overall Length for versatile reach 10 mm Shank: compact and rigid design Left-hand cutting orientation for specific setups Precision and Compatibility for Consistent Turning Results The Turning Holder is engineered to hold VCMT 1103 indexable inserts with consistent repeatability, reducing setup time and ensuring predictable cutting geometry. The ISO designation SVJCL 1010 indicates a standardized shank and clamping arrangement, which simplifies tool selection and replacement. Users benefit from stable insert seating and a defined 93° cutting angle, supporting accurate profile turning and dependable tool life. Compact Design That Improves Rigidity and Access A compact 10 mm shank combined with a 12 mm Schneidekopf (Cutter Head) width provides a balance of rigidity and access in confined workspaces. The reduced overhang minimizes vibration and enhances surface finish when turning. This design is particularly useful for light-to-medium machining tasks where tool stiffness directly translates into improved dimensional accuracy and longer insert life. Intended Use and Who Benefits Most Workshops and precision turners who use VCMT 1103 inserts will find this holder suited for conventional and left-hand turning operations. The left cutting direction makes it appropriate for specific setup requirements on lathes and turning centers. Manufacturers seeking a compact, reliable clamping solution will appreciate the straightforward compatibility and the holder’s contribution to reduced downtime during insert changes. Simple Integration and Clear Technical Footprint Installation follows common clamping procedures for indexable tooling; the SVJCL 1010 coding helps match the holder to existing tool posts and turrets. With a total length of 110 mm and an overall weight that supports rapid acceleration on CNC turrets, the holder integrates smoothly into production processes. The clear technical specification supports maintenance planning and reordering without ambiguity. Highly recommended for workshops requiring precise left-hand turning: contact METAV Werkzeuge for competent advice and support on Teknik Makina tooling at info@metav-werkzeuge.com or +49 2822 7131930 Name: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D383TM Compatible Inserts: VCMT 1103 ISO Designation: SVJCL 1010 Secondary Designation: J11 Overall Length: 110 mm Shank Width: 10 mm Shank Height: 10 mm Cutter Head Width: 12 mm Cutting Direction: Left Cutting Angle: 93° Weight: 0.086 kg GTIN: 4061905153921 Availability: In Stock Label: Klemmhalter SVJCL 1010 93° VCMT 1103 Manufacturer: Teknik Makina Manufacturer Address: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder SVJCL 1010 by Teknik Makina? The Turning Holder SVJCL 1010 from Teknik Makina is designed specifically for VCMT 1103 indexable inserts, ensuring correct seating and clamping for that insert geometry. Can the Teknik Makina Turning Holder be used for right-hand turning? The Teknik Makina Turning Holder SVJCL 1010 is specified for left cutting direction; for right-hand operations, a corresponding right-hand holder should be used. How does the 110 mm length affect machine compatibility? A 110 mm overall length provides practical reach for many turret and tool post setups while keeping overhang low, which helps maintain rigidity and improve surface finish when using the Turning Holder from Teknik Makina. Who can advise if this Turning Holder meets my machining needs? If unsure whether the Turning Holder SVJCL 1010 fits your application, METAV Werkzeuge offers detailed consultation and technical support by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. 93° Turning Holder SVJCL 1010 for VCMT 1103, 110mm, Left - Teknik Makina

Clamp Holder MTJN for TN-- Indexable Inserts by Teknik Makina The Clamp Holder MTJN for TN-- Indexable Inserts is a robust turning holder designed for secure clamping of TN-- style indexable inserts, delivering precise 93° cutting geometry for machining high-quality surfaces. Precise 93° cutting angle for accurate surfaces Compatible with TN-- 1604 and TN-- 2204 inserts 125 mm overall length for stable mounting Rigid clamping reduces vibration, improves finish ISO designation MTJNR 2020 ensures standard fit Durable Design for Consistent Precision The Clamp Holder is manufactured to provide stable clamping and repeatable positioning of indexable inserts. The accurately machined saddle and clamp interface keep inserts firmly in place during machining, which helps to maintain surface quality and tool life. The 93° cutting geometry supports precise profile control, particularly beneficial when producing tight tolerances or finished contours. This emphasis on mechanical stability directly translates into fewer rejects and more consistent component quality. Broad Compatibility and Practical Use Cases Designed for use with TN-- style inserts, the holder accepts both TN-- 1604 and TN-- 2204 insert types, making it versatile across a range of turning operations. Its standardised ISO designation means the holder integrates easily into existing tool setups for turning, light milling and threading tasks where indexable-carbide inserts are preferred. For workshops that run mixed-batch production, this compatibility reduces the need for multiple specialised toolholders and simplifies tooling logistics. Faster Tool Changes and Lower Operating Costs Because only the worn insert needs replacement, the holder minimises downtimes and consumable costs compared with solid tooling. The design allows straightforward removal of clamping screws for rapid insert changes, supporting reduced setup times and higher machine utilisation. For production environments, this leads to measurable productivity gains: less time spent on retooling, more time on cutting, and lower lifecycle expense per component. Built for Professional Workshops and Precision Requirements This turning holder targets professional machinists, toolroom technicians and industries demanding repeatable accuracy. With an overall length of 125 mm and a compact profile, the holder fits standard tool posts while still providing the rigidity expected in industrial environments. The product’s construction supports stable cutting conditions and contributes to improved surface finishes, making it suitable for serial production as well as precision prototyping. Strongly recommend the Teknik Makina Clamp Holder MTJN for TN-- Indexable Inserts for workshops seeking enhanced machining accuracy and faster tool changes — for expert advice and order support please contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Information Clamp Holder MTJN for TN-- Indexable Inserts Brand: Teknik Makina SKU: D194TM Compatible Inserts: TN-- 1604, TN-- 2204 Overall Length: 125 mm Weight: 0.429 kg ISO Designation: MTJNR 2020 Shank Designation: K16 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Angle: 93° Cutting Direction: right GTIN: 4061905151088 Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Clamp Holder MTJN from Teknik Makina? The Clamp Holder MTJN from Teknik Makina is compatible with TN-- 1604 and TN-- 2204 indexable inserts, allowing flexible selection of grades and geometries to match workpiece materials and cutting conditions. How do I change an insert on the Clamp Holder MTJN for TN-- Indexable Inserts? To change an insert, loosen the clamping screw, remove the worn TN-- insert, locate the replacement in the saddle and retighten the screw; the holder’s design facilitates quick, toolshop-safe insert swaps. Is the Clamp Holder MTJN suitable for heavy-duty turning? The Teknik Makina Clamp Holder MTJN offers a rigid interface and a stable 93° geometry; while suited for many industrial turning tasks, select insert grades and machine parameters should match the specific heavy-duty application. Where can I get support or further data for the Clamp Holder MTJN? For detailed technical data or application advice regarding the Clamp Holder MTJN, contact METAV Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930; their team provides comprehensive and competent consultation. 93° Clamp Holder MTJNR 2020 for TN-- 1604 Indexable Inserts, 125 mm Length - Teknik Makina

Clamp Holder SVJB for VBMT Indexable Inserts by Teknik Makina Clamp Holder SVJB for VBMT Indexable Inserts is a precision turning toolholder designed for secure clamping of VBMT indexable inserts and optimized for coolant-fed machining and consistent surface quality. Compatible with VBMT 1103 and VBMT 1604 93° cutting angle for accurate surface finishes Internal cooling channels for effective chip and heat control 110 mm overall length for stable tool support ISO designation SVJBR 1010 for consistent fit Precision turning with a 93° cutting geometry for consistent surface quality The clamp-style toolholder delivers a 93° cutting angle, enabling reproducible surface results and reliable chip flow in turning operations. Manufactured by Teknik Makina, the robust geometry ensures that the insert seats precisely and resists displacement during cutting, which reduces vibrations and improves repeatability. This focused design translates into fewer rework cycles and a steadier process window when finishing shafts, shoulders or facing operations. Internal cooling to extend Insert life and improve process reliability Equipped with internal cooling channels, the holder provides directed coolant to the cutting zone, which lowers cutting temperatures and promotes efficient chip evacuation. The built-in coolant feed creates a lubricating film between tool and material that reduces friction, resulting in longer insert life and more consistent tool performance. For deep or continuous turning sequences, this coolant-fed concept minimizes thermal damage and contributes to predictable tool wear. Fast insert changes reduce setup time and increase productivity The clamp mechanism is engineered for quick and repeatable insert replacement: the VBMT inserts seat securely and the clamping screws are easy to loosen and tighten, allowing fast tooling swaps and shorter machine downtime. This simplicity lowers setup costs and supports higher machine utilisation, making the holder a practical choice for batch production or mixed-series turning where rapid tool changes are required. Application focus and target users Designed for professional turning tasks, the holder suits workshops and production lines that use VBMT 1103 and VBMT 1604 inserts for steel, stainless steel and cast materials. It is particularly beneficial where coolant-fed machining and precise surface integrity are priorities. Due to its ISO designation and stable shank, the toolholder is a good match for manufacturers seeking reproducible results and low-maintenance tooling solutions. Built quality and manufacturer credentials Produced by Teknik Makina, a supplier with ISO 9001:2015-certified production, the holder reflects industry-standard quality controls and consistent manufacturing processes. The combination of precise fit (ISO SVJBR 1010) and carefully routed coolant channels means the toolholder supports process stability and is suited for environments demanding dependable performance over many cycles. For precision turning applications where coolant-fed machining and rapid insert changes matter, choose the Teknik Makina Clamp Holder SVJB for VBMT Indexable Inserts — METAV Werkzeuge provides expert technical advice and swift support via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Bezeichnung: Clamp Holder SVJB for VBMT Indexable Inserts Marke: Teknik Makina SKU: AP540TM Suitable Inserts: VBMT 1103, VBMT 1604 Overall Length: 110 mm Width: 10 mm Height: 10 mm Cutting Head Width: 12 mm Cutting Angle: 93° Cut Direction: Right ISO Designation: SVJBR 1010 Internal Cooling: Yes Weight: 0.097 kg GTIN: 4061905052279 Torx Key: T8 Torx Screw: M2,5x6,5 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder SVJB for VBMT Indexable Inserts from Teknik Makina? The Clamp Holder SVJB for VBMT Indexable Inserts by Teknik Makina is compatible with VBMT 1103 and VBMT 1604 indexable inserts, providing a secure seat and reliable clamping for standard VBMT geometries. Does the Teknik Makina Clamp Holder SVJB have coolant supply? Yes, the Teknik Makina Clamp Holder SVJB for VBMT Indexable Inserts features internal cooling channels, allowing coolant to be fed directly to the cutting zone to reduce temperatures and improve chip evacuation. What is the overall length and designation of this turning holder? The turning holder comes with an overall length of 110 mm and carries the ISO designation SVJBR 1010, ensuring consistent fit and interchangeability in ISO-compliant setups. Can METAV Werkzeuge advise on whether this Clamp Holder suits my machining task? METAV Werkzeuge offers comprehensive consultation: enquiries about the Clamp Holder SVJB for VBMT Indexable Inserts by Teknik Makina can be directed to info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored technical guidance. 93° Clamp Holder SVJB for VBMT 1103, Internal Coolant, 110mm - Teknik Makina

Turning Holder (Klemmhalter) — SCLC for CCMT Indexable Inserts by Teknik Makina The Turning Holder SCLC for CCMT Indexable Inserts is a precision tool holder designed for secure clamping of CCMT 0602 inserts in right-hand turning applications. Turning Holder for CCMT 0602 Inserts ISO SCLCR 1212 designation 110 mm Overall Length for stable support 95° Cutting Angle for improved chip control Right-hand orientation suitable for standard setups Precision Design for Consistent Turning Results Built to deliver repeatable performance, this holder combines a rigid Clamping Mechanism with a compact profile. The design accepts CCMT 0602 Indexable Inserts and is specified as SCLCR 1212, which ensures compatible seating and secure fixation under load. With an Overall Length of 110 mm the assembly provides the necessary overhang control to reduce vibration, while the 95° Cutting Angle promotes predictable chip flow. These characteristics translate directly into higher process stability and longer Insert Life, making the component a reliable choice for demanding turning operations. Practical Benefits on the Shop Floor The holder’s compact Width and Height of 12 mm and the 12 mm cutting head width minimize interference when working in tight setups. Because the unit is manufactured for a Right-hand cutting direction, setup time is reduced where standard right-handed toolpaths are used. The geometry supports consistent seat contact and repeatable positioning, which reduces rework and tool-change downtime. For machinists seeking straightforward integration, the combination of robust clamping and defined geometry simplifies tool management and improves cycle-time predictability. Who Benefits and Where to Get Support Engineers, maintenance technicians and small-to-medium workshops that perform precision turning will find this holder especially suitable where CCMT inserts are already standard. The component was developed by Teknik Makina with an emphasis on compatibility and ease of use, making it suitable for both retrofit and new toolpost installations. If there is any uncertainty about fitment or when specific cutting conditions demand tailored solutions, METAV Werkzeuge offers competent, hands-on consultation and can provide additional technical data or setup advice — contactable by email, phone or WhatsApp for rapid support. We recommend the Teknik Makina Turning Holder for precision, repeatability and simple integration — for individual consultation and technical assistance contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271). Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D424TM For Indexable Inserts: CCMT 0602 ISO Designation: SCLCR 1212 Alternate Designation: J06-F Overall Length: 110 mm Width: 12 mm Height: 12 mm Cutting Head Width: 12 mm Cutting Angle: 95° Cutting Direction: Right (right-hand) Weight: 0.147 kg GTIN: 4061905153198 Manufacturer: Teknik Makina Manufacturer Address: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts does the Turning Holder by Teknik Makina accept? The Teknik Makina Turning Holder is engineered for CCMT 0602 Indexable Inserts and seats them in an SCLCR 1212 configuration to ensure correct clamping and positioning for reliable turning operations. Is this holder suitable for left-hand turning setups? This specific holder is designed for a Right-hand cutting direction; for left-hand applications a suitable left-oriented version or alternative holder should be chosen to match the required toolpath. How long is the holder and what does that mean for vibration? The holder has an Overall Length of 110 mm, which helps limit overhang and reduces vibration in many setups, improving surface finish and insert life when used within recommended operating conditions. Can METAV Werkzeuge help with setup or technical questions? Yes, METAV Werkzeuge provides extensive and competent advice for complex products; for assistance with the Turning Holder from Teknik Makina contact info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp at +49 170 2837271. 95° CCMT 0602 Turning Clamp Holder SCLC for CCMT Indexable Inserts, 110mm - Teknik Makina

Turning Holder — Clamp holder DCLN for CN-- indexable inserts The Turning Holder is a 95° clamp holder designed for CN-- indexable inserts, engineered for precise turning operations in professional workshops. DCLN design for CN-- 1204, 1606, 1906 inserts 95° cutting angle for precise surface finishes Overall length 125 mm for stable tool setup Secure clamping reduces insert movement ISO designation DCLNR 2020 for standardized fitting Precision clamping that stabilizes every pass The Turning Holder by Teknik Makina delivers a secure clamping solution that prevents insert slippage and reduces vibration during machining. A fixed 95° cutting angle ensures reproducible surface quality and simplifies tool setup. By maintaining a rigid connection between holder and insert, operators benefit from consistent dimensional accuracy and fewer rejects, increasing throughput in serial production. This makes the holder particularly suitable where repeatability and tight tolerances matter. Fast insert changes to cut downtime and increase productivity Quick removal and replacement of the insert screws allow for short tool-change cycles and reduced machine idle time. The clamp design permits straightforward access to the fastening screws so that worn CN-- inserts can be exchanged rapidly. Fewer and faster setups translate directly into lower operating costs per part and higher machine utilization, a clear advantage for job shops and production lines seeking to optimize cycle times. Designed for diverse materials and professional use Engineered for compatibility with CN-- 1204, CN-- 1606 and CN-- 1906 indexable inserts, this clamp holder supports a wide range of geometries and coatings. That versatility makes it a reliable choice for turning steels, stainless alloys and cast iron under differing cutting conditions. Werkstätten and manufacturers will appreciate the holder’s adaptability when standardizing tooling across multiple machines and part families. Durable manufacture and quality assurance for long service life Manufactured with precise metalworking standards, the clamp holder offers long-term stability that protects tooling investment and reduces frequency of replacements. Teknik Makina’s production processes—backed by ISO-aligned procedures—contribute to consistent part geometry and repeatable performance. A robust build minimizes vibration-induced wear, improving surface finish and extending the lifetime of both holder and inserts. Choose Teknik Makina’s Turning Holder for reliable, precise turning—and contact METAV Werkzeuge for personalised technical advice and ordering support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271. Technical Data Designation: Turning Holder Brand: Teknik Makina SKU: D160TM Compatible inserts: CN-- 1204, CN-- 1606, CN-- 1906 Overall length: 125 mm Weight: 0.441 kg ISO designation: DCLNR 2020 Alternate designation: K12 Width: 20 mm Height: 20 mm Cutting head width: 25 mm Cutting angle: 95° Cutting direction: right GTIN: 4061905151330 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with CN-- 1204, CN-- 1606 and CN-- 1906 indexable inserts, allowing you to select geometries suited to your cutting task. Can the Teknik Makina Turning Holder be used for finishing passes? Yes, the 95° cutting angle and secure clamp design of the Turning Holder by Teknik Makina support precise finishing operations with improved surface quality. How quickly can inserts be replaced in the Turning Holder? Insert replacement is fast and tool-free in practice: the clamp screws on the Turning Holder are designed for easy access so worn CN-- inserts can be exchanged with minimal downtime. Who should I contact for technical questions about the Turning Holder? If you need further specifications or help choosing the right clamp holder, contact METAV Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930. 95° DCLNR 125mm Turning Holder for CN-- 1204, 20x20mm - Teknik Makina

Clamp Holder (Turning Holder) by Teknik Makina The Clamp Holder (Turning Holder) secures WN-- 0604 indexable inserts at a 95° cutting angle for precise turning and efficient tool changes. Clamp Holder for WN-- 0604 Inserts 95° Cutting Angle for Precise Surfaces DWLNR 1616 ISO Designation 100 mm Overall Length Built for reliable clamping and faster setup times The Clamp Holder from Teknik Makina is engineered to deliver a secure fit and fast insert changes, so machining cycles run without interruptions. A precise seat holds the WN-- 0604 insert firmly in place, preventing slip and enabling consistent cutting performance across repetitive runs. The design reduces rework and shortens downtime because only the worn insert needs replacing, not the whole tool body. Improved accuracy and surface quality with every cut Rigid tool support and optimised geometry reduce vibration and support Precise Positioning of the cutting edge, which helps to achieve consistent surface finishes. The 95° cutting angle contributes to predictable chip flow and stable contact conditions, making it easier to meet tight tolerances during finishing passes. Operators benefit from repeatable results and less manual rework. Broad compatibility for turning operations and versatile use This holder is compatible with ISO indexable inserts WN-- 0604 and WN-- 0804 and is specified for right-hand cutting direction, making it suitable for a wide range of turning tasks. Workshops can use the holder in conventional turning setups as well as in operations that require quick tool replacement. Compatibility with common insert geometries ensures flexible deployment across different materials and component types. Practical advantages for production shops and maintenance teams By enabling rapid insert replacement and stable clamping, the tool supports improved throughput and Cost Efficiency over time. Smaller inventories of complete tools are required because only the cutting inserts are exchanged when worn. Maintenance staff appreciate the straightforward screw access for quick service, while production planners value the predictable tool life and reduced changeover time. We recommend the Teknik Makina Clamp Holder for demanding turning applications—contact METAV Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Bezeichnung: Clamp Holder (Klemmhalter) Brand: Teknik Makina SKU: D181TM For Indexable Inserts: WN-- 0604, WN-- 0804 ISO Designation: DWLNR 1616 Overall Length: 100 mm Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Cutting Angle: 95° Cutting Direction: right Suitable For: Turning, compatible with ISO WN-- Inserts Weight: 0.229 kg GTIN: 4061905150883 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder by Teknik Makina and which sizes are supported? The Clamp Holder from Teknik Makina accepts ISO WN-- 0604 inserts and is also compatible with WN-- 0804 variants; these specifications make the holder suitable for common indexable insert geometries used in turning operations. Is the Teknik Makina Clamp Holder suitable for finishing passes and high-precision work? Yes, the Teknik Makina Clamp Holder with its 95° cutting angle and stable clamping delivers the precision and surface quality required for finishing passes and tight-tolerance turning. How easy is it to change an insert on this Turning Holder? Insert replacement on the Turning Holder is straightforward: the screws are easily accessible for quick removal and reinstallation, enabling reduced setup times and fast tool service during production. Can METAV Werkzeuge provide technical advice for using the Clamp Holder in my process? METAV Werkzeuge offers competent consultation for technical questions and process integration; contact them at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D181TM","sku":"D181TM","mpn":"D181TM","gtin13":"4061905150883","name":"Clamp Holder DWLNR 1616 95° for WN-- 0604, 100 mm Length - Teknik Makina","description":"Clamp holder DWLN for WN-- indexable inserts; 95° cutting angle; 100 mm overall length; compatible with WN-- 0604 and WN-- 0804; robust metal construction for secure seating and quick insert changes.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/02/8d/e2/62/62e28d020f56dbb4de4e1282/d181tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/da/7e/de/62/62de7eda148ec6b71020ffb8/d181tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3d/7e/de/62/62de7e3dbd24461b3d5f7a21/d181tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Designation EN","value":"Turning Holder"},{"@type":"PropertyValue","name":"Designation 2","value":"DWLN for WN-- Indexable Inserts"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"WN-- 0604, WN-- 0804"},{"@type":"PropertyValue","name":"Overall Length","value":"100 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.229 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"DWLNR 1616"},{"@type":"PropertyValue","name":"Shank Designation","value":"H06"},{"@type":"PropertyValue","name":"Width","value":"16 mm"},{"@type":"PropertyValue","name":"Height","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts are compatible with this clamp holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with WN-- 0604 and WN-- 0804 indexable inserts."}},{"@type":"Question","name":"What is the overall length of the holder?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 100 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The holder features a 95° cutting angle for precise surface finishes."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation is DWLNR 1616."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/clamp-holder-d181tm","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Clamp Holder DWLN Series"},{"@type":"Thing","name":"Turning Applications"},{"@type":"Thing","name":"Indexable Inserts WN-- 0604 Compatibility"}],"mentions":[{"@type":"Thing","name":"Quick insert change"},{"@type":"Thing","name":"95° cutting angle"},{"@type":"Thing","name":"ISO DWLNR 1616 specification"}]}]}

Klemmhalter — Turning Holder by Teknik Makina Klemmhalter Turning Holder designed for secure clamping of WN-- 0604 indexable inserts in precision turning applications DWLNL 1616 ISO designation compatibility Designed for WN-- 0604 indexable inserts 100 mm overall length for stable engagement 95° cutting angle for left-hand turning Precision Clamping for Consistent Turning Results The Turning Holder delivers reliable clamping and repeatable positioning, which directly improves Surface Finish and cycle consistency in production environments. Built to accept WN-- 0604 indexable inserts, the tool holder’s geometry minimises vibration and ensures secure insert seating. This design reduces rework and supports predictable machining outcomes, making it suitable for shops that prioritise accuracy and uptime. Robust Geometry That Supports Tool Life and Process Stability With a 95° Cutting Angle and a 20 mm Schneidekopf Breite, the holder is engineered for stable cutting forces during left-hand operations. The DWLNL 1616 ISO designation and the 16 x 16 mm tool shank provide a compact yet rigid interface, translating into reduced chatter and longer Insert Life. For machinists, this means fewer tool changes and a clearer path to consistent part tolerances. Practical Use Cases and Who Benefits Most Small to medium-sized machine shops, toolrooms and maintenance departments benefit from the straightforward compatibility and compact footprint. The Klemmhalter is particularly effective in turning tasks that require left-hand cut direction and robust clamping of WN-- 0604 inserts. If process reliability and predictable tool behaviour are priorities, this holder supports efficient workflows and helps maintain production schedules. Fast Setup and Clear Compatibility Information Installation is simple: the holder accepts WN-- 0604 indexable inserts and corresponds to the ISO code DWLNL 1616; overall length is 100 mm, with a 16 mm Width and 16 mm Height for the shank. The secondary designation H06 is provided for ordering and matching to tool posts. For users unfamiliar with indexable insert types, WN-- 0604 refers to the insert shape and size; pairing the correct insert ensures correct seating and cutting geometry. Choose Teknik Makina’s Klemmhalter for proven clamping precision and contact METAV Werkzeuge for personalised technical advice — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D328TM Compatible Inserts: WN-- 0604 ISO Designation: DWLNL 1616 Secondary Designation: H06 Overall Length: 100 mm Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Cutting Angle: 95° Cutting Direction: left Weight: 0.229 kg GTIN: 4061905150944 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter Turning Holder from Teknik Makina? The Klemmhalter Turning Holder by Teknik Makina is designed to accept WN-- 0604 indexable inserts; pairing the correct insert ensures proper seating and intended cutting geometry. What are the key dimensions of the Teknik Makina Klemmhalter Turning Holder? The Teknik Makina Klemmhalter Turning Holder features a 100 mm overall length, a 16 mm Width and 16 mm Height shank, and a 20 mm cutting head width, matching the ISO designation DWLNL 1616. Is the Klemmhalter suitable for left-hand turning operations? Yes, the Klemmhalter Turning Holder is specified for left cutting direction with a 95° cutting angle, making it suitable for left-hand turning setups. Who can I contact for technical advice about the Klemmhalter Turning Holder? For personalised support regarding the Klemmhalter Turning Holder from Teknik Makina, METAV Werkzeuge offers expert consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D328TM","sku":"D328TM","mpn":"D328TM","gtin13":"4061905150944","name":"Klemmhalter DWLNL 1616 95° WN-- 0604","description":"DWLN for WN-- indexable inserts; 100 mm length; left cut; 16x16 mm body; 20 mm cutting head width; robust turning holder by Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/02/8d/e2/62/62e28d024355de0a51335f51/d328tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3d/7e/de/62/62de7e3d148ec6b71020ff81/d328tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/da/7e/de/62/62de7edabd24461b3d5f7a61/d328tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Compatible Inserts","value":"WN-- 0604"},{"@type":"PropertyValue","name":"Overall Length","value":"100 mm"},{"@type":"PropertyValue","name":"Body Width","value":"16 mm"},{"@type":"PropertyValue","name":"Body Height","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Left"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"Weight","value":"0.229 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"DWLNL 1616"},{"@type":"PropertyValue","name":"Designation 2","value":"H06"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with WN-- 0604 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 100 mm."}},{"@type":"Question","name":"What are the holder dimensions?","acceptedAnswer":{"@type":"Answer","text":"Body dimensions 16x16 mm; cutting head width 20 mm."}},{"@type":"Question","name":"What is the cutting direction?","acceptedAnswer":{"@type":"Answer","text":"Left cut (left)."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"DWLN Series"},{"@type":"Thing","name":"WN-- 0604 Compatibility"}],"mentions":[{"@type":"Thing","name":"H06 designation"},{"@type":"Thing","name":"95° cutting angle"},{"@type":"Thing","name":"100 mm overall length"}]}]}

Turning Holder MWLN for WN-- 0804 by Teknik Makina The Turning Holder is a 95° clamping tool designed for WN-- 0804 indexable inserts, engineered for precise turning tasks in professional workshops. MWLN design for WN-- 0804 inserts 95° cutting angle for consistent surface quality 125 mm overall length for stable support Fast insert change with secure clamping Compatible with ISO WN-- 0804 indexable inserts High-precision clamping for repeatable results Delivered as a robust clamp holder, this tool offers a consistently fixed seat for ISO WN-- 0804 indexable inserts, ensuring repeatable precision during turning operations. The 95° geometry produces predictable cutting conditions, which reduces deflection and enhances surface finish. Workshops benefit from reduced scrap rates and improved process reliability when the clamping system maintains position under cutting loads. Faster setups and lower operating costs Quickly accessible screws and a secure clamping interface allow a rapid exchange of worn inserts, cutting setup time and increasing productive machining hours. By replacing only the consumed insert rather than the entire tool, maintenance costs decrease and tool inventory becomes more efficient. This economy of tooling is particularly relevant for batch production and job shops aiming to keep cycle times tight while maintaining consistent component quality. Built for professional environments and diverse applications Designed with industry demands in mind, the holder’s MWLN geometry supports a wide range of turning tasks on steels, non-ferrous materials and cast irons when paired with suitable WN-- 0804 inserts. The solid construction minimizes vibration and contributes to prolonged insert life, making this holder appropriate for high-precision finishing and semi-finish operations. Reliability under repeat loads makes it a practical choice for demanding production schedules. Manufacturer quality and workshop support Produced by Teknik Makina, a company with certified production standards and a long history in tooling, the holder is made to meet consistent manufacturing tolerances. The combination of precise machining and a proven clamping concept supports stable cutting forces and predictable tool behavior. For complex machining questions or to verify suitability for a specific application, technical advice is available from METAV Werkzeuge to help integrate the holder into your process. I recommend the Teknik Makina Turning Holder with MWLN geometry for demanding turning operations—contact METAV Werkzeuge for personalised technical advice and rapid delivery via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Technical Information Designation: Clamp Holder MWLN for WN-- 0804 indexable inserts Brand: Teknik Makina SKU: D182TM Compatible Inserts: WN-- 0804 (ISO) Overall Length: 125 mm Weight: 0.435 kg ISO Designation: MWLNR 2020 Secondary Designation: K08 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Direction: right Cutting Angle: 95° Cutting Height: 35 mm Availability: in Stock Condition: new GTIN: 4061905151002 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina? The Turning Holder from Teknik Makina is designed for ISO WN-- 0804 indexable inserts; using certified WN-- 0804 geometries ensures correct seating and clamping performance. How does the 95° angle affect machining with the Teknik Makina Turning Holder? A 95° cutting angle on the Teknik Makina Turning Holder produces defined engagement and stable cutting conditions, which improves surface quality and reduces vibration in finishing passes. Can I change the insert quickly on the MWLN Turning Holder? Yes, the MWLN Turning Holder by Teknik Makina features easily accessible screws and a secure clamp interface that enable fast insert replacement and reduce machine downtime. Is the Turning Holder suitable for heavy-duty turning? The Teknik Makina Turning Holder is engineered for stable clamping and minimal deflection; pairing it with appropriate WN-- 0804 inserts and correct cutting parameters makes it suitable for many professional turning applications. Need technical help choosing the right configuration? If you are unsure whether the Teknik Makina Turning Holder meets your requirements, METAV Werkzeuge provides competent consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. 95° Clamp Holder MWLN for WN-- 0804 Indexable Inserts, 125 mm Length - Teknik Makina

Clamp Holder PCLN for CNMG Indexable Inserts — Turning Holder by Teknik Makina The Clamp Holder PCLN for CNMG Indexable Inserts is a 95° Turning Holder with internal coolant, engineered for precise metal turning and reliable chip evacuation in professional workshops. Designed for CNMG 1204 indexable inserts 95° cutting angle for consistent surface quality Internal coolant for improved chip evacuation Stable PCLNR 1616 profile for secure clamping Achieve consistent surface quality with a 95° geometry The 95° Cutting Angle of this holder ensures repeatable geometry and helps produce flat, uniform surfaces on turning operations. By keeping the insert orientation stable, the tool reduces deflection and vibration, which translates into improved surface finish and fewer secondary operations. This benefit is particularly relevant for component runs where dimensional consistency matters. Internal coolant that extends tool life and improves chip control Equipped with internal coolant, the holder channels cooling fluid directly to the cutting edge, enhancing chip evacuation and reducing cutting temperatures. Lower temperatures decrease wear on the Insert and the Holder, which leads to longer Stand Time and more predictable tool life. For deep cuts or interrupted cuts, the internal coolant significantly reduces thermal stress and prevents built-up edge. Fast insert replacement and robust clamping for productivity The PCLN clamping concept combined with the PCLNR 1616 profile provides a secure seat for CNMG inserts and enables quick Insert changes with minimal rework. The clamping Screw TH818 and Lock Lever TL4 are engineered for easy access and reliable fixation, so downtime for tool change is reduced and process stability is increased. Shops benefit from shortened setup times and enhanced repeatability. Designed for professional workshops and diverse turning tasks This Turning Holder is aimed at professional Machine Shops and precision workshops that work with steel, stainless steel and cast materials. The tool’s compatibility with CNMG 1204 inserts and its 100 mm overall length make it suitable for general turning, facing and finishing tasks where stability and coolant supply are essential. The holder supports right-hand cutting direction and is a practical choice for serial production. Choose the Teknik Makina Clamp Holder PCLN for CNMG Indexable Inserts to improve machining stability and tool life — for expert advice and ordering contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271. Technical Data Bezeichnung: Clamp Holder PCLN for CNMG Indexable Inserts Brand: Teknik Makina SKU: AP129TM For Indexable Inserts: CNMG 1204 / CNMG 09T3 Overall Length: 100 mm Weight: 0.236 kg Hex Key: 3 Allen Internal Coolant: Yes ISO Designation: PCLNR 1616 Secondary Designation: H12-IKG1/8 Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Clamping Screw: TH818 Lock Lever: TL4 Cutting Angle: 95° Cutting Direction: Right GTIN: 4061905150272 Manufacturer: Teknik Makina Manufacturer or Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person or Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder PCLN for CNMG Indexable Inserts by Teknik Makina (Turning Holder)? The Clamp Holder PCLN for CNMG Indexable Inserts from Teknik Makina accepts CNMG 1204 (and CNMG 09T3) indexable inserts, ensuring a precise fit and correct seating for stable cutting performance. Does the Teknik Makina Clamp Holder have internal coolant? Yes, the Teknik Makina Clamp Holder PCLN for CNMG Indexable Inserts is supplied with internal coolant channels to deliver cutting fluid directly to the cutting edge for better chip control and extended tool life. How long is the Clamp Holder and what are its dimensions? The Clamp Holder PCLN for CNMG Indexable Inserts comes with an overall length of 100 mm, a body width of 16 mm and a cutting head width of 20 mm, making it suitable for a range of turning setups. Can METAV Werkzeuge advise on compatibility and technical data for this Turning Holder? Absolutely — METAV Werkzeuge provides expert consultation for the Teknik Makina Clamp Holder PCLN for CNMG Indexable Inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and additional technical information. 95° PCLNR 1616 Turning Holder for CNMG 1204, 100 mm, Internal Coolant - Teknik Makina

Clamp Holder (PWLN for WNMG Indexable Inserts) by Teknik Makina The Clamp Holder PWLN for WNMG Indexable Inserts is a robust turning holder designed for secure clamping and precise 95° cutting operations. Clamp Holder PWLN — Teknik Makina Internal coolant for improved chip evacuation Compatible with WNMG 0604 and WNMG 0804 inserts 95° Cutting Angle for precise Surface Finishing 125 mm Overall Length for stable machining Precision clamping for consistent turning performance High repeatability starts with a secure interface: the Clamp Holder seats WNMG-style inserts with exact tolerances to prevent movement under cutting forces. This precise fit reduces vibration and ensures reproducible surface quality, so each workpiece leaves the machine with consistent dimensions and finish. Reliable clamping also lowers rework rates and stabilises tool behaviour in series production. Internal coolant improves tool life and chip control Tools equipped with Internal Coolant channel coolant directly to the cutting edge, efficiently cooling hot chips and flushing them away from the cutting zone. For users unfamiliar with this concept: coolant delivered through internal channels creates a lubricating film and reduces cutting temperatures, which decreases wear and extends insert life. The result is longer uninterrupted machining and fewer tool changes. Fast insert changes and broad compatibility save setup time Designed for WNMG 0604 and WNMG 0804 indexable inserts, this holder enables quick replacement of worn cutting edges without repositioning the toolbody. The accessible clamp screw and guiding geometry simplify routine maintenance and shorten downtime between operations. For production environments, fewer adjustment steps translate directly into higher throughput and lower per-part processing time. Built for versatile turning tasks and professional users This turning solution suits workshops and production shops that demand stable machining and easy maintenance. With a 95° cutting angle and a 125 mm overall length, the holder is particularly effective for facing, finishing passes and applications where surface quality is essential. If further application advice is needed, METAV Werkzeuge offers expert consultation to match tooling combinations to specific materials or cycle requirements. Choose Teknik Makina's Clamp Holder PWLN for dependable clamping and enhanced productivity — for personalised support contact METAV Werkzeuge at info@metav-werkzeuge.com or by phone at +49 2822 7131930 (WhatsApp +49 170 2837271) Bezeichnung: Clamp Holder PWLN for WNMG Indexable Inserts Marke: Teknik Makina SKU: AP150TM Fits indexable inserts: WNMG 0604, WNMG 0804 Overall length: 125 mm Weight: 0.425 kg Allen key: 3 Allen ISO designation: PWLNR 2020 Alternative designation: K08-IKG1/8 Width: 20 mm Height: 20 mm Cutting head width: 25 mm Clamping screw: TH821 Knee lever: TL4 Cutting angle: 95° Cutting direction: right Cutting height: 30 mm Through-pin: TS-4 Internal coolant: Yes Manufacturer or Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person or Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder from Teknik Makina and which sizes are supported? The Clamp Holder PWLN from Teknik Makina is compatible with ISO WNMG indexable inserts, specifically WNMG 0604 and WNMG 0804 sizes, allowing straightforward integration with common turning stocks. Does the Teknik Makina Clamp Holder feature internal coolant and why is that useful? Yes, the Teknik Makina Clamp Holder includes Internal Coolant, which channels coolant to the cutting zone to lower temperatures, improve chip evacuation and increase insert life for more efficient machining. How does the 95° Cutting Angle affect machining when using the Clamp Holder? A 95° Cutting Angle on the Clamp Holder by Teknik Makina enables accurate surface finishing and stable facing operations, making it suitable for applications where dimensional accuracy and surface quality are priorities. Can METAV Werkzeuge help determine if the Clamp Holder suits my application? METAV Werkzeuge provides expert advice for tooling combinations; contact METAV Werkzeuge for tailored recommendations on using the Clamp Holder PWLN for specific materials or process requirements. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP150TM","sku":"AP150TM","mpn":"AP150TM","gtin13":"4061905150333","name":"PWLN Turning Holder for WNMG 0804, 95°, 125 mm - Teknik Makina","description":"PWLN turning holder for WNMG 0604 and WNMG 0804 indexable inserts; 95° cutting angle; internal coolant; robust clamp design for secure, quick insert changes.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/0b/8d/e2/62/62e28d0b33927e49dbf377ee/ap150tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/de/7e/de/62/62de7edebd24461b3d5f7a64/ap150tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/43/7e/de/62/62de7e43bd24461b3d5f7a25/ap150tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Suitable Inserts","value":"WNMG 0604, WNMG 0804"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.425 kg"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"Internal Coolant","value":"yes"},{"@type":"PropertyValue","name":"ISO Designation","value":"PWLNR 2020"},{"@type":"PropertyValue","name":"Shank Width","value":"20 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"},{"@type":"PropertyValue","name":"Allen Key","value":"3 Allen"},{"@type":"PropertyValue","name":"Clamp Screw","value":"TH821"},{"@type":"PropertyValue","name":"Cam Lever","value":"TL4"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this turning holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with WNMG 0604 and WNMG 0804 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"Does the holder have internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant channels for improved chip evacuation and tool life."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The cutting angle is 95°, suitable for precise surface finishes."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"PWLN Turning Holder Series"},{"@type":"Thing","name":"Internal Coolant Tools"},{"@type":"Thing","name":"Allround Turning Applications"}],"mentions":[{"@type":"Thing","name":"WNMG 0804 Indexable Inserts"},{"@type":"Thing","name":"Internal Coolant Channels"},{"@type":"Thing","name":"PWLNR 2020 ISO Designation"},{"@type":"Thing","name":"TH821 Clamp Screw"}]}]}

Turning Holder PWLNL 1616 — Holder for WNMG 0604 Indexable Inserts The Turning Holder PWLNL 1616 is a precision turning tool holder designed for WNMG 0604 indexable inserts, offering stable reach and coolant support for demanding metalcutting tasks. Turning Holder PWLNL 1616 for WNMG 0604 inserts Integrated internal coolant for reliable chip evacuation 100 mm overall length for stable machining reach 95° cutting angle with left cutting direction 16 x 16 mm shank and 20 mm cutting head width Precision and stability for consistent turning performance The Turning Holder delivers repeatable positioning through its rigid PWLNL 1616 geometry and compact dimensions. With a 100 mm overall length and a 16 x 16 mm shank, the toolholder minimises deflection during cuts and supports consistent surface finish across serial production. The 95° cutting angle combined with the left cutting direction makes the holder suitable for a wide range of turning operations where a defined tool orientation is required. This results in predictable tool behaviour and reduced setup adjustments. Enhanced cooling for better tool life and surface quality Equipped with internal coolant, the holder directs coolant to the insert seat and cutting zone to improve chip evacuation and reduce thermal load. Better coolant delivery helps preserve insert grade performance and can lead to longer edge life and improved part quality, especially in medium to high cutting conditions. For workshops that prioritise uptime and surface integrity, the integrated coolant path contributes to fewer interruptions for insert changes. Fast, secure clamping for efficient changeovers Clamping and adjustment are simplified by the robust fastening components: the tool uses the TH617 clamping screw and the TL3 knee lever together with a 2.5 Allen key for reliable tightening. This configuration ensures stable insert retention and fast changeovers, so technicians spend less time at setup and more time machining. The 20 mm cutting head width supports standard WNMG 0604 inserts while maintaining a low-profile design for versatile clearance. Compatibility and workshop integration for straightforward use Designed specifically for WNMG 0604 indexable inserts, the holder integrates easily into existing turning setups and tooling families. Its ISO designation PWLNL 1616 provides a clear reference for programmers and buyers, while accessory references such as the H06-IKG1/8 mounting designation and TA021 backing plate facilitate parts sourcing and inventory alignment. The holder's left cutting orientation should be matched to the machining strategy to achieve optimal cutting conditions. Choose Teknik Makina’s Turning Holder for reliable, production-ready turning — for expert advice and order support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: AP164TM For Indexable Inserts: WNMG 0604 ISO designation: PWLNL 1616 Overall length: 100 mm Shank width: 16 mm Shank height: 16 mm Cutting head width: 20 mm Cutting height: 30 mm Cutting angle: 95° Cutting direction: left Internal coolant: Yes Clamping screw: TH617 Knee lever: TL3 Roll pin: TS3 Mounting designation: H06-IKG1/8 Inbussschlüssel: 2.5 Allen Backing plate: TA021 GTIN: 4061905150401 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PWLNL 1616 from Teknik Makina? The Turning Holder PWLNL 1616 by Teknik Makina is designed specifically for WNMG 0604 indexable inserts, ensuring correct seating and secure clamping for standard insert geometries. Does the Teknik Makina Turning Holder support internal coolant? Yes, the Teknik Makina Turning Holder PWLNL 1616 features internal coolant to assist chip evacuation and help extend insert life under demanding cutting conditions. Which tools are required to change inserts on the Turning Holder PWLNL 1616? Insert changes on the Teknik Makina Turning Holder PWLNL 1616 are performed using a 2.5 Allen key together with the TH617 clamping screw and the TL3 knee lever for quick and secure fastening. Is the Turning Holder suitable for left-hand turning applications? The Teknik Makina Turning Holder PWLNL 1616 is specified with a left cutting direction and a 95° cutting angle, making it appropriate for left-hand turning strategies when matching tool orientation to the machining plan. 95mm PWLNL 1616 Turning Holder for WNMG 0604, 100mm Length, 95° Cut, Left - Teknik Makina

Clamping Holder — Turning Holder for CC-- 09T3 Indexable Inserts by Teknik Makina The Clamping Holder (Turning Holder) secures CC-- 09T3 indexable inserts for precise left-hand turning operations in workshop lathes. SCLCL 1212 ISO designation for secure mounting Compatible with CC-- 09T3 indexable inserts 110 mm overall length for stable support 95° cutting angle for optimized chip flow Left-hand configuration for dedicated turning tasks Engineered for consistent clamping and compatibility The Clamping Holder is designed to provide a rigid and predictable interface between lathe tooling and Indexable Inserts. Its SCLCL 1212 ISO designation ensures compatibility with standard toolposts while the geometry accommodates CC-- 09T3 Inserts reliably. For users unfamiliar with insert tooling: Indexable Inserts are replaceable cutting tips that bolt or clamp into a holder, allowing rapid replacement without regrinding. This design reduces setup time and keeps cutting conditions repeatable, which is particularly beneficial when consistent part quality is required. Optimised geometry for chip control and tool life A single clear advantage of the holder is the 95° Cutting Angle, which promotes favourable chip formation and evacuates material away from the workpiece. Combined with a 16 mm Cutting Head Width, the construction reduces cutting forces at the tool tip and prolongs Insert life under comparable conditions. The left-hand orientation directs cutting loads into the machine bed, improving stability in long or slender parts and making the holder suited to applications that demand controlled chip flow and surface finish. Practical fit for workshops and precision turning Machinists and small-batch production shops will find this Turning Holder useful when working with a variety of steels and non-ferrous materials. The 110 mm Overall Length balances reach and rigidity, making the component suitable for routine turning, facing, and profiling tasks. For operators new to Holder selection: choose based on Insert type (here CC-- 09T3), Machine Tool compatibility, and the required Cut Direction; this product addresses those parameters directly, reducing guesswork in tooling choices. Mounting, identification and simple terminology Mounting uses a standard clamping approach consistent with holders of the SCLCL 1212 family: secure the Insert into the pocket, align the seat, and tighten the clamp screw to the machine-maker’s recommended torque. The ISO designation identifies the Holder’s shank dimensions (12 x 12 mm) and orientation, so matching the Holder to a compatible Toolpost is straightforward. If any term feels unfamiliar—such as cutting angle (the angle between the insert edge and workpiece surface) or shank size (the cross-section of the holder that fits the tool post)—the definitions above should help bridge the gap. For reliable left-hand turning, choose the Teknik Makina Clamping Holder — for personalised technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271. Technical Information Bezeichnung: Clamping Holder Brand: Teknik Makina SKU: D405TM Secondary Designation: SCLC for CCMT Indexable Inserts ISO Designation: SCLCL 1212 Compatible Inserts: CC-- 09T3 Alternate Tool Shank Reference: J09 Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 16 mm Cutting Angle: 95° Cut Direction: left Weight: 0.14 kg GTIN: 4061905153082 Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamping Holder by Teknik Makina? The Clamping Holder from Teknik Makina is compatible with CC-- 09T3 indexable inserts; the SCLCL 1212 ISO designation ensures the insert seat matches these types for secure mounting. Is this Turning Holder suitable for right-hand operations? This Turning Holder is configured for left-hand cutting; for right-hand operations a holder with the opposite cut direction should be selected to ensure correct chip flow and tool orientation. How do I identify the correct shank size for my toolpost? Check the Holder’s ISO designation SCLCL 1212 and the Shank dimensions (12 mm x 12 mm); these values indicate compatibility with toolposts that accept a 12×12 mm shank. Where can I get technical support for installation and selection? METAV Werkzeuge offers competent advice for the Clamping Holder (Turning Holder) by Teknik Makina — contact info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific guidance. 95° SCLCL 1212 Turning Holder for CC-- 09T3 Indexable Inserts, 110 mm length - Teknik Makina

Turning Holder by Teknik Makina Turning Holder — a robust Clamp Holder designed for precise turning operations with WN-- 0804 indexable inserts. Clamp holder for WN-- 0804 inserts 95° cut angle for precise surface finish Secure clamping with easy insert change ISO designation MWMNN 2020, robust design 125 mm total length for stable turning Precision and Stability for Demanding Turning Tasks The Turning Holder delivers consistent results through its 95° Cut Angle and solid construction. Machined tolerances ensure the Insert remains fixed during machining, which translates into repeatable Dimensions and improved Surface Quality. The secure clamping reduces vibration and supports longer tool life, so a stable setup becomes a measurable advantage in serial production or demanding single-part work. Fast Tool Changes and Lower Operating Costs Designed for efficient workflows, the Clamp Holder allows straightforward removal and replacement of the Indexable Inserts; screws are easily accessible to enable quick service. This Quick Change capability reduces Setup Time and downtime, and replacing only the worn Insert instead of the entire tool lowers Consumable Costs. The result is higher Productivity without sacrificing Process Reliability. Compatibility and Practical Application Advice This toolholder is compatible with ISO WN-- 0804 inserts and follows the MWMNN 2020 footprint, making it suitable for a wide range of Turning and Facing operations on Steel and other common materials. For applications requiring fine surface finishes or tight Tolerances, the combination of secure clamping and the defined Cut Angle supports consistent part quality. If specific insert grades or geometries are required, METAV Werkzeuge offers competent consultation to select the optimal Insert pairing. Quality, Standards and Manufacturer Background Produced by Teknik Makina, the holder meets recognised production standards and benefits from a manufacturing process established since 1987. The clear ISO-style designation and defined dimensions (Length, Width, Height) make integration into existing tool setups straightforward. A well-documented component such as this toolholder simplifies procurement and process documentation in quality-managed environments. Choose Teknik Makina's robust Turning Holder for reliable, high-precision turning — METAV Werkzeuge provides expert support and technical advice: info@metav-werkzeuge.com, +49 2822 7131930. Designation: Turning Holder Brand: Teknik Makina SKU: D114TM Compatible Indexable Inserts: WN-- 0804 Total Length: 125 mm Weight: 0.432 kg ISO Designation: MWMNN 2020 Secondary Designation: K08 Width: 20 mm Height: 20 mm Cutting Head Width: 10 mm Cut Angle: 95° GTIN: 4061905151064 Label: Klemmhalter MWMNN 2020 95° WN-- 0804 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed for ISO WN-- 0804 indexable inserts; use inserts matching that designation for correct seating and clamping. How does the 95° Cut Angle affect machining results with the Teknik Makina Turning Holder? A 95° Cut Angle on the Teknik Makina Turning Holder supports accurate surface generation and predictable Cutting Forces, which helps achieve consistent Surface Finish and Dimensional Accuracy. Is the clamp mechanism on the Teknik Makina Turning Holder easy to service? Yes, the clamp mechanism on the Teknik Makina Turning Holder features accessible fastening screws for fast Insert replacement, reducing Rüstzeit and simplifying maintenance. Can METAV Werkzeuge advise on using the Turning Holder in a production setup? METAV Werkzeuge offers comprehensive consultation for the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical support. 95° Clamp Holder MWMNN For WN-- 0804 Indexable Inserts, 125mm Length - Teknik Makina

Product Technical Details: Order Number: KA232TM Item: Boring Bar usable with CC-- 0602 Indexable Inserts Brand: Teknik Makina ISO Code: A08H SCLCL 06 Numerical Representations: Diameter: 10mm Weight: 0.05kg Total length: 100mm Cutting Height: 16mm Additional Informattion Cutting Direction: links Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Comprehensive Technical Specifications: Order Number: KA102TM Item: Boring Bar usable with CC-- 0602 Indexable Inserts Brand: Teknik Makina ISO Code: A08H SCLCR 06 Quantitative Characteristics: Diameter: 10mm Weight: 0.05kg Total length: 100mm Cutting Height: 16mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Specifications: Order Number: KA234TM Item: Boring Bar usable with CC-- 0602 Indexable Inserts Brand: Teknik Makina ISO Code: A10J SCLCL 06 Numbers and Data: Diameter: 12mm Weight: 0.074kg Total length: 110mm Cutting Height: 20mm Additional Informattion Cutting Direction: links Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com