Gibt es einen Hahn und Kolb Online Shop?

Turning Holder (Clamping Holder) — for VBMT 1103 Indexable Inserts by Teknik Makina The Turning Holder is a precision Clamping Holder engineered for secure mounting of VBMT 1103 indexable inserts in left-hand turning operations. For VBMT 1103 Indexable Inserts 110 mm Overall Length 93° Cutting Angle, Left-Hand Direction Compact 10×10 mm Shank with 12 mm Head Engineered for precision and stable cutting forces The Turning Holder from Teknik Makina combines a rigid Clamping design with a defined 93° Cutting Angle to deliver consistent engagement with VBMT 1103 inserts. This precision geometry reduces vibration and flank wear, which leads to improved Surface Quality and Predictable Tool Life. The secure clamp seat ensures repeatable positioning of the insert so setups remain stable across production cycles. Compact dimensions that improve accessibility and setup flexibility With an Overall Length of 110 mm and a Shank of 10×10 mm, this Holder is intended for tight Toolpost arrangements and reduced overhang. The 12 mm Cutting Head Width supports chip formation control while keeping the tool silhouette compact, enabling access to narrow workpiece features. Reduced projection improves rigidity and allows higher feed rates without compromising finish. Standardised interface and versatile application range Marked as SVJBL 1010 (ISO designation), the Holder accepts VBMT 1103 inserts and aligns with industry tooling standards for quick interchangeability. The Left-Hand Cutting Direction makes it suitable for specific turning tasks and fixture layouts. For workshops and small series production, this configuration simplifies inventory management and speeds up tool changeovers while maintaining Process Reliability. Support, quality assurance and who this is for Designed by Teknik Makina for machinists, toolrooms and production shops that demand reproducible results, this Holder targets professionals focused on turning accuracy and uptime. METAV Werkzeuge offers comprehensive advice for selection and integration; expert assistance is available for questions about suitability, clamping torque or mounting orientation to ensure optimal performance in your environment. Trust Teknik Makina’s Turning Holder for demanding turning operations — for personalised advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Turning Holder Marka/Manufacturer: Teknik Makina SKU: D370TM For Indexable Inserts: VBMT 1103 Compatible Inserts: VBMT 1103 Overall Length: 110 mm Weight: 0.097 kg ISO Designation: SVJBL 1010 Secondary Designation: J11 Width (Shank): 10 mm Height (Shank): 10 mm Cutting Head Width: 12 mm Cutting Angle: 93° Cutting Direction: Left GTIN: 4061905153679 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder compatible with VBMT 1103 inserts? Yes, the Turning Holder by Teknik Makina is specifically designed for VBMT 1103 indexable inserts and provides the correct seat geometry for secure clamping and repeatable positioning. What is the Cutting Direction and how does it affect use? The Teknik Makina Turning Holder is configured for Left-Hand cutting, which determines the approach angle and is suitable for operations and fixture setups that require left-handed tool engagement. Can METAV Werkzeuge help with selection and mounting advice? METAV Werkzeuge offers extensive consultation for the Turning Holder and can assist with technical questions, mounting recommendations and compatibility checks; contact info@metav-werkzeuge.com or +49 2822 7131930. What standard designation does the Holder follow? The Holder carries the ISO designation SVJBL 1010, ensuring standardised interface dimensions for straightforward integration into existing tooling systems. 110mm SVJBL 1010 Turning Holder for VBMT 1103 Indexable Inserts, 93° Cutting Angle, Left-Hand - Teknik Makina

Turning Holder by Teknik Makina — Precision Toolholder for Turning Operations The Turning Holder is a robust clamping solution designed for VBMT 1103 indexable inserts, delivering stable support for left-hand turning and demanding metalcutting applications. Turning Holder for VBMT 1103 inserts Internal coolant for improved chip evacuation 110 mm overall length for stable support ISO SVJBL 1212 form for standard toolholders Left-hand cutting direction with 93° cutting angle Improved Process Reliability through Precise Clamping The Turning Holder from Teknik Makina secures VBMT 1103 inserts with high repeatability, reducing vibration and increasing tool life. Its 110 mm overall length contributes to stable support in the toolpost, which helps maintain consistent cutting conditions. The design translates into more predictable surface finish and fewer reworks, making it suitable for series turning where process reliability matters. Built-in Coolant for Cleaner Chips and Longer Insert Life Equipped with Internal Coolant, this holder channels coolant directly to the cutting zone, aiding chip evacuation and heat control. Delivering coolant to the insert flank reduces thermal load on the cutting edge and helps prevent built-up edge formation. As a result, machining can run longer between indexings, improving productive cutting time with minimal operator intervention. Standardised Interface and Clear Compatibility The holder uses the ISO designation SVJBL 1212 and is matched to VBMT 1103 indexable inserts, which simplifies selection and tooling logistics. Indexable inserts are replaceable cutting tips that allow fast tool change without reclamping the entire holder; this holder’s compatibility ensures easy integration into existing holder-insert systems and reduces setup time for workshops transitioning between jobs. Designed for Workshops and Production Environments Technik Makina engineered this toolholder for machinists and production shops that require a dependable left-hand turning solution. The Left-hand orientation and 93° cutting angle are optimised for specific turning tasks where approach geometry matters. Maintenance is straightforward thanks to standard Torx fastening (Torx T8, M2.5x6.5), so service and reassembly stay quick and reliable. Choose Teknik Makina’s proven Turning Holder for precise left-hand turning and contact METAV Werkzeuge for personalised technical advice and workshop support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Brand: Teknik Makina SKU: AP551TM Suitable Indexable Inserts: VBMT 1103 Overall Length: 110 mm Weight: 0.141 kg ISO Designation: SVJBL 1212 Alternative Designation: J11-IK Width: 12 mm Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: Left Cutting Angle: 93° Internal Coolant: Yes Torx Key: T8 Torx Screw: M2.5x6.5 GTIN: 4061905052392 Availability: In stock Condition: New Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which insert format is required? The Turning Holder by Teknik Makina is designed for VBMT 1103 indexable inserts; these standard inserts offer a cost-effective replaceable cutting edge and ensure straightforward tooling compatibility with the holder’s ISO SVJBL 1212 interface. Does the Teknik Makina Turning Holder provide coolant to the cutting edge? Yes, the Turning Holder includes Internal Coolant, which supplies coolant directly to the cutting zone to support chip evacuation and thermal control, thereby extending insert life when used with appropriate coolant supply. Which cutting direction and angle does the Turning Holder support? The Teknik Makina Turning Holder is configured for left-hand turning and features a 93° cutting angle, making it suitable for applications that require that approach geometry and for setups where left-handed tool orientation is required. Who can I contact for advice on whether the Turning Holder fits my machine or process? METAV Werkzeuge provides expert consultation for tooling selection; for bespoke guidance on the Turning Holder by Teknik Makina, contact METAV at info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP551TM","sku":"AP551TM","mpn":"AP551TM","gtin13":"4061905052392","name":"Turning Holder SVJBL 1212 93° VBMT 1103","description":"110mm turning holder for VBMT 1103 indexable inserts, SVJBL 1212, left cutting direction, internal coolant; robust 12x12mm body with 16mm cutting head width.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/09/8d/e2/62/62e28d0933927e49dbf377e8/ap550tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Length","value":"110 mm"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"VBMT 1103"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJBL 1212"},{"@type":"PropertyValue","name":"Body Width","value":"12 mm"},{"@type":"PropertyValue","name":"Body Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"},{"@type":"PropertyValue","name":"Internal Coolant","value":"yes"},{"@type":"PropertyValue","name":"Weight","value":"0.141 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for VBMT 1103 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SVJBL 1212."}},{"@type":"Question","name":"Is internal coolant supported?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder supports internal coolant."}},{"@type":"Question","name":"Which direction is the cutting?","acceptedAnswer":{"@type":"Answer","text":"Cutting direction is left."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-svjbl-1212-93-vbmt-1103","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Indexable Insert Tooling"},{"@type":"Thing","name":"Workshop and Lathe Applications"}],"mentions":[{"@type":"Thing","name":"VBMT 1103 Inserts"},{"@type":"Thing","name":"SVJBL 1212 ISO Designation"},{"@type":"Thing","name":"Internal Coolant Feature"}]}]}

Turning Holder SVJBL 1010 — Turning Holder for VBMT 1103 by Teknik Makina Turning Holder SVJBL 1010 is a precision tool holder designed for secure clamping of VBMT 1103 indexable inserts, optimized for left-hand turning operations in metalworking workshops. Compatible with VBMT 1103 indexable inserts Internal coolant supply for improved cooling 110 mm overall length for stable overhang Compact 10 x 10 mm shank for tight toolposts 93° cutting angle for reliable profile control Precision clamping tailored to VBMT 1103 inserts The Turning Holder SVJBL 1010 is engineered to ensure repeatable, secure seating of VBMT 1103 inserts with an ISO designation of SVJBL 1010. Its 10 x 10 mm shank and 12 mm Schneidekopf (cutting head) width provide a compact interface that reduces vibration and improves surface finish. The 93° cutting angle and left-hand cut orientation deliver predictable geometry for external turning profiles, helping to maintain dimensional accuracy on workpieces. Improved cooling and straightforward setup for efficient machining Built-in internal coolant improves tool life and chip control by directing coolant toward the cutting edge, which stabilizes temperatures during interrupted cuts. Assembly and insert changes are simplified with the specified Torx hardware: a T8 key and M2.5x6.5 Torx screw ensure consistent clamping torque and safe fixation. The secondary designation J11-IK can be used to match compatible boring or clamping systems when integrating the holder into existing setups. Robust choice for workshop reliability and frequent use With an overall length of 110 mm and a low mass of approximately 0.097 kg, this holder balances rigidity and handling convenience for machinists. The design supports routine production and job-shop environments where fast indexable insert changes and stable cutting conditions are required. The product is offered in stock and in new condition, making it suitable for replacing worn holders or expanding tooling options for turning centers that rely on VBMT 1103 inserts. Strong recommendation: For shops seeking precise left-hand turning with reliable coolant support, choose the Teknik Makina Turning Holder SVJBL 1010 — for personalised technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Designation: Turning Holder Brand/Manufacturer: Teknik Makina SKU: AP550TM Alternative designation: SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1010 Compatible inserts: VBMT 1103 Secondary part reference: J11-IK Overall length: 110 mm Shank width: 10 mm Shank height: 10 mm Cutting head width: 12 mm Cutting height: 30 mm Cutting angle: 93° Cut direction: left Internal coolant: Yes Torx key: T8 Torx screw: M2.5x6.5 Weight: 0.097 kg GTIN: 4061905052385 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ How do I fit a VBMT 1103 insert into the Turning Holder SVJBL 1010 from Teknik Makina? To install a VBMT 1103 insert in the Turning Holder SVJBL 1010 by Teknik Makina, position the insert on the seat, secure it with the specified M2.5x6.5 Torx screw and tighten using a T8 Torx key to the recommended torque for stable clamping. Does the Turning Holder SVJBL 1010 support internal coolant? Yes, the Turning Holder SVJBL 1010 from Teknik Makina features internal coolant, allowing directed coolant flow to the cutting edge, which helps extend insert life and improve chip evacuation during machining. Which cutting direction and applications suit the Teknik Makina Turning Holder SVJBL 1010? The Teknik Makina Turning Holder SVJBL 1010 is configured for left-hand cutting with a 93° cutting angle, making it suitable for external turning operations and profile work where left-handed tool orientation is required. Who can provide technical advice if I am unsure this holder fits my machine? For application-specific guidance, METAV Werkzeuge offers competent consultation; contact METAV Werkzeuge for assistance with the Turning Holder SVJBL 1010 by Teknik Makina at info@metav-werkzeuge.com or call +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP550TM","sku":"AP550TM","mpn":"AP550TM","gtin13":"4061905052385","name":"Turning Holder SVJBL 1010 93° VBMT 1103","description":"110mm turning holder for VBMT 1103 indexable inserts with 93° cutting angle and internal coolant; robust SVJB design by Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/09/8d/e2/62/62e28d0933927e49dbf377e8/ap550tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Length","value":"110 mm"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"VBMT 1103"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJBL 1010"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Internal Coolant","value":"yes"},{"@type":"PropertyValue","name":"Width","value":"10 mm"},{"@type":"PropertyValue","name":"Height","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.097 kg"},{"@type":"PropertyValue","name":"Screw","value":"M2,5x6,5"},{"@type":"PropertyValue","name":"Torx Key","value":"T8"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with VBMT 1103 indexable inserts."}},{"@type":"Question","name":"What is the total length?","acceptedAnswer":{"@type":"Answer","text":"Total length is 110 mm."}},{"@type":"Question","name":"Does the holder have internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93°."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-svjbl-1010-93-vbmt-1103","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SVJBL 1010"},{"@type":"Thing","name":"VBMT 1103 Compatibility"},{"@type":"Thing","name":"Internal Coolant Feature"}],"mentions":[{"@type":"Thing","name":"Torx T8 Key"},{"@type":"Thing","name":"M2,5x6,5 Screw"},{"@type":"Thing","name":"J11-IK Adapter"}]}]}

Turning Holder (Klemmhalter) — Teknik Makina Turning Holder (SVJB for VBMT Indexable Inserts) is a precision clamping tool designed to secure VBMT 1103 indexable inserts for stable left-hand turning operations in metalworking and CNC environments. Precision fit for VBMT 1103 inserts Overall length 110 mm for stable setup SVJBL 1212 ISO designation for compatibility Left-hand 93° cutting angle for defined chip flow Compact 12 x 12 mm shank for narrow toolholders Robust design for precise clamping and repeatability The clamping concept ensures a consistent seat for indexable cutting edges, reducing runout and vibration during turning. The holder is manufactured to tight tolerances so that the SVJBL 1212 designation matches common toolholder standards and guarantees interchangeability with VBMT 1103 inserts. Users benefit from improved surface finish and extended Insert Life thanks to the steady clamp force and rigid overall length of 110 mm, which supports a stable overhang during machining. Optimised geometry for controlled left-hand machining A clearly defined cutting geometry supports predictable chip formation and tool engagement. The Turning Holder is configured for left cutting direction and features a 93° cutting angle, which helps direct chips away from the workpiece and toolpost while maintaining a favourable cutting edge contact. For operators, this translates into fewer rework cycles and smoother machining on cast, forged or turned components where controlled material removal is essential. Tailored for workshops and precision engineering shops This holder is aimed at machine shops, toolrooms and production environments that require reliable, repeatable tooling solutions. The compact profile and standardised ISO identification make the tool straightforward to integrate into existing toolsets, while the rigid shank design supports shorter cycle times and consistent part tolerances. Technicians and programmers benefit from predictable tool behaviour, reducing setup time and enabling consistent productivity across batches. Compatibility, dimensions and simple installation Installation is intuitive: the holder accepts VBMT 1103 inserts and aligns via standard datum faces, making replacement quick during tool changes. Key dimensions such as the 12 mm width and 12 mm height of the shank and the 12 mm cutting-head width ensure compatibility with narrow toolposts and fixtures. Where required, adjusting seating and clamp torque helps achieve optimal contact and repeatable positioning without complex recalibration. Choose Teknik Makina’s precision Turning Holder with SVJBL 1212 compatibility for dependable machining performance — METAV Werkzeuge provides expert consultation and technical support at info@metav-werkzeuge.com or +49 2822 7131930 Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D396TM Für Wendeplatten: VBMT 1103 Passende Wendeplatten: VBMT 1103 Gesamtlänge: 110 mm Gewicht: 0,132 kg ISO Bezeichnung: SVJBL 1212 Bezeichnung 2: J11-F Breite: 12 mm Höhe: 12 mm Schneidekopf Breite: 12 mm Schnittwinkel: 93° Schnittrichtung: left Hersteller oder Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person oder Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts does the Turning Holder by Teknik Makina accept? The Turning Holder (Klemmhalter) from Teknik Makina is designed for VBMT 1103 indexable inserts, providing a precise fit and standardised seating for efficient turning operations. Is the Teknik Makina Turning Holder suitable for left-hand turning only? Yes, the Turning Holder by Teknik Makina is configured for left-hand cutting direction with a defined 93° cutting angle to optimise chip flow and tool engagement in left-hand turning applications. How do I get technical support for the Turning Holder (Klemmhalter)? For expert advice on the Turning Holder (Klemmhalter) from Teknik Makina, METAV Werkzeuge offers comprehensive consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised assistance. What are the key dimensions to check before purchase of the Teknik Makina Turning Holder? Check the overall length of 110 mm and the shank dimensions of 12 mm x 12 mm to ensure the Turning Holder (Klemmhalter) from Teknik Makina fits your toolpost and tooling setup. 93° SVJBL 1212 Turning Holder for VBMT 1103 Indexable Inserts, 110mm Length - Teknik Makina

Klemmhalter (Turning Holder) by Teknik Makina The Klemmhalter (Turning Holder) is a precision clamping tool designed for VBMT 1103 indexable inserts, optimised for secure right-hand turning operations. Compatible with VBMT 1103 inserts 110 mm Overall Length for stable reach Secure clamping with SVJBR 1212 design 93° Cutting Angle for precise tool geometry Right-hand cut for standard turning tasks Precision fit and predictable results for demanding turning Designed to accept VBMT 1103 indexable inserts, this turning holder ensures a consistent seating and repeatable tool position, which reduces setup time and increases machining reliability. The holder’s SVJBR 1212 ISO design provides a defined clamping interface that limits insert play and improves surface finish. Users benefit from less rework and more predictable cycle times when the toolholder and insert system match precisely. Stable reach and improved access in confined setups With an overall length of 110 mm, the holder offers the necessary reach while maintaining rigidity for many standard lathe configurations. This balance between length and stiffness helps avoid chatter and dimensional deviation during turning operations. For applications where access is limited, the holder’s compact geometry simplifies tool layout without compromising cutting stability, delivering a dependable solution for medium-reach turning tasks. Optimised geometry for accurate cutting behaviour The holder’s 93° cutting angle and dedicated right-hand orientation translate into controlled chip flow and defined cutting forces, supporting consistent tool life and surface quality. By aligning insert geometry and holder angle, the system reduces unexpected deflection and enables more precise depth-of-cut control. This technical alignment is particularly beneficial for repeat production runs where part tolerance consistency is critical. Quick identification and straightforward installation Marked with the ISO designation SVJBR 1212 and compatible marking J11-F, the holder simplifies tool selection and inventory management. Its 12 mm width and 12 mm height dimensions for the shank and cutting head make it easy to match with standard turret pockets. Clear technical identification speeds up tool changeovers and helps technicians avoid mismatched assemblies, reducing downtime on the machine. Who will benefit from this toolholder Manufacturers and job shops that require reliable, repeatable turning operations will find this holder well suited to their setups. The combination of proven ISO interface, defined cutting angle and right-hand orientation makes it a practical choice for parts with medium turning depths and moderate finishing requirements. For technicians seeking a straightforward, robust toolholder solution, this component supports efficient workshop workflows. Choose the Teknik Makina Turning Holder for dependable VBMT 1103 performance — for expert advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Information Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D129TM GTIN: 4061905153792 Compatible Inserts: VBMT 1103 Overall Length: 110 mm ISO Designation: SVJBR 1212 Alternate Designation: J11-F Width: 12 mm Height: 12 mm Cutting Head Width: 12 mm Cutting Angle: 93° Cutting Direction: right Weight: 0.132 kg Availability: in Stock Condition: new Label: Klemmhalter SVJBR 1212 93° VBMT 1103 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter by Teknik Makina Turning Holder? The Klemmhalter by Teknik Makina is designed for VBMT 1103 indexable inserts, ensuring proper seating and compatibility with the SVJBR 1212 interface for stable turning. Can this Turning Holder be used for left-hand cutting? This Turning Holder from Teknik Makina is configured for right-hand cutting only; for left-hand operations a different holder with the appropriate orientation should be selected. How does the 93° cutting angle affect performance of the Klemmhalter? The 93° cutting angle on the Klemmhalter provides defined cutting geometry that supports consistent chip flow and predictable cutting forces, improving surface finish and repeatability. Where can I get technical support for the Technik Makina Klemmhalter? For technical advice on the Teknik Makina Klemmhalter, METAV Werkzeuge offers competent consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. 110mm Turning Holder SVJB for VBMT 1103, SVJBR 1212, 93° Cutting Angle - Teknik Makina

Turning Holder (SVJB for VBMT Indexable Inserts) by Teknik Makina Turning Holder (SVJB for VBMT Indexable Inserts) is a compact, flat clamping solution engineered for precision turning with VBMT 1103 indexable inserts, optimized for right-hand cutting in confined setups. Turning Holder for VBMT 1103 indexable inserts Internal Coolant for improved tool life and cooling Compact 110 mm Overall Length for tight setups ISO SVJBR 1212 clamping for secure insert seating Right-hand cutting with 93° cutting angle specification Precision Clamping for Consistent Results A robust clamping concept ensures that machining remains reliable even under varying cutting conditions. The holder accepts VBMT 1103 indexable inserts and secures them with an ISO SVJBR 1212 clamping, which provides repeatable seating and reduced vibration. This improves surface finish and extends Insert life, so operators benefit from fewer tool changes and more predictable cycle times. For shops focused on small-series turning and finishing operations, this holder offers stability and repeatability. Compact Dimensions that Fit Tight Setups Measured at an Overall Length of 110 mm with a body Width and Height of 12 mm, the design is tailored for applications where space is limited. The Cutting Edge Height of 32 mm and the 93° Cutting Angle deliver controlled engagement and predictable chip flow. These dimensions allow easy integration into existing tool posts and fixtures, simplifying setup and reducing the need for additional adapters. Users gain reliability and space efficiency without sacrificing rigidity. Built for Serviceability and Efficient Cooling Maintenance and assembly are straightforward thanks to the specified Torx drive and hardware. The clamping screw specification M2.5x6.5 and the Torx key T8 ensure quick insert changes with common tools, while the compatible drill bar reference J11‑F‑IK aids in selecting the correct mounting accessories. Integrated Internal Coolant channels support direct coolant delivery to the cutting zone, improving cooling and chip evacuation; this helps to lower cutting temperatures and maintain tool life for demanding Turning operations. Suited for Professional Workshops and Precision Turning Designed by Teknik Makina for machinists who prioritise accuracy, the holder excels in finishing and light to medium roughing tasks where controlled chip formation and tool stability matter. The flat SVJB style is particularly useful for setups requiring low-profile tools. Operators and toolmakers will value the combination of compact form, coolant capability and standardised clamping for faster changeovers and consistent part quality. Choose Teknik Makina’s Turning Holder for dependable clamping and efficient coolant support — for personalised technical advice or to confirm fitment, contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Turning Holder (Klemmhalter) Brand / Manufacturer: Teknik Makina SKU: AP548TM Variant Description: SVJB for VBMT Indexable Inserts, flat design (SVJB für VBMT Wendeplatten, flache Ausführung) Compatible Inserts: VBMT 1103 Overall Length: 110 mm Overall Height: 12 mm Body Width: 12 mm Cutting Head Width: 12 mm Cutting Edge Height: 32 mm Cutting Direction: right Cutting Angle: 93° Clamping Designation (ISO): SVJBR 1212 Mounting Drill Bar Reference: J11-F-IK Internal Coolant: Yes Torx Key: T8 Torx Screw: M2.5x6.5 Weight: 0.11 kg Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which insert size is recommended? The Turning Holder from Teknik Makina is designed for VBMT 1103 indexable inserts; using the specified VBMT 1103 insert size ensures correct seating and optimal performance with the holder’s ISO SVJBR 1212 clamping. Does the Turning Holder support internal coolant and how does that help? Yes, the Teknik Makina Turning Holder features Internal Coolant, which delivers coolant directly to the cutting zone to reduce temperature, improve chip evacuation and prolong Insert life during continuous turning operations. Which tools are needed to change inserts on the Turning Holder? Insert changes on the Turning Holder are carried out with a T8 Torx key and the specified M2.5x6.5 Torx screw; these common tools make maintenance quick and help minimise downtime. Is the Turning Holder suitable for right-hand and left-hand machining? The supplied Turning Holder is specified for right-hand cutting; for left-hand operations, please consult METAV Werkzeuge to identify the correct variant or alternative compatible tooling. 110mm SVJB for VBMT Indexable Inserts, Flat, Internal Coolant - Teknik Makina

Turning Holder — Clamping Holder for VBMT 1103 Indexable Inserts by Teknik Makina The Turning Holder is a compact, precision clamping solution for VBMT 1103 indexable inserts, designed for reliable right‑hand turning operations in constrained tool setups. Compatible with VBMT 1103 indexable inserts 110 mm overall length for extended reach 93° cutting angle for controlled engagement Right‑hand cutting direction for standard turning ISO SVJBR 1010 designation for system compatibility Robust Design for Consistent Clamping and Machining Accuracy Built to provide secure insert retention, this clamping toolholder combines a compact cross‑section with a stable Schneidkopf to minimise vibration and ensure repeatable results. The Turning Holder features a 110 mm overall length and a compact profile that supports rigid setup in small toolholders, delivering consistent contact between tool and workpiece while reducing chatter for improved surface quality. Precise Geometry Enhances Cutting Control and Tool Life The holder's 93° Cutting Angle and right‑hand orientation optimise chip formation and entry conditions, which helps to stabilise cutting forces and protect the Insert edge. For operators, this means predictable tool engagement and a reduced need for frequent adjustments; the geometry supports moderate to aggressive turning strategies while promoting longer insert life through balanced load distribution. System Compatibility and Installation Ease Designed for VBMT 1103 indexable inserts and identified as ISO SVJBR 1010, the toolholder aligns with common clamping systems and fits holders with J11‑F shank designations. The narrow 10 mm cross dimensions of the holder head enable installation in compact turret pockets and allow access to tight work areas, making setup straightforward and repeatable for workshop technicians and production environments. Who Benefits and Where to Use It Engineered for precision shops and production turning centres, this clamping solution suits machinists who require dependable insert retention in confined tool positions. The combination of compact dimensions, standard ISO designation and robust design makes the product a practical choice for finishing and semi‑roughing operations where setup stability and insert repeatability are priorities. For application recommendations and optimisation tips, METAV Werkzeuge offers expert consultation. Choose Teknik Makina’s Turning Holder for dependable, accurate turning — for personalised application advice and order support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Specifications Designation: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D128TM Compatible Inserts: VBMT 1103 Overall Length: 110 mm Weight: 0.098 kg ISO Designation: SVJBR 1010 Secondary Designation: J11-F Width: 10 mm Height: 10 mm Schneidkopf Width: 10 mm Schneidehöhe: 22 mm Cutting Direction: right Cutting Angle: 93° GTIN: 4061905153785 Availability: in Stock Condition: new ECLASS: 21181004 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Can the Turning Holder by Teknik Makina accept VBMT 1103 inserts? Yes, the Turning Holder from Teknik Makina is specifically compatible with VBMT 1103 indexable inserts and is designed to secure them reliably in right‑hand turning applications. What does the ISO SVJBR 1010 designation mean for the Teknik Makina Turning Holder? The ISO SVJBR 1010 designation indicates the holder geometry and mounting interface standard, ensuring the Teknik Makina Turning Holder matches holders and toolposts built to the same specification for straightforward integration. Is the Teknik Makina Turning Holder suitable for tight turret pockets? The compact head dimensions (10 mm width/height) make the Turning Holder appropriate for constrained tool positions; Teknik Makina designed this holder to provide reach without sacrificing clamping stability. Where can I get support if I am unsure whether the Turning Holder meets my machining requirements? If you need help assessing whether the Teknik Makina Turning Holder fits your application, METAV Werkzeuge provides detailed advice — contact them at info@metav-werkzeuge.com or +49 2822 7131930 for personalised technical support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D128TM","sku":"D128TM","mpn":"D128TM","gtin13":"4061905153785","name":"Klemmhalter SVJBR 1010 93° VBMT 1103","description":"Turning holder SVJB for VBMT 1103 indexable inserts, 110 mm overall length, 93° cutting angle, right-hand; robust 10×10 mm clamping interface by Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/be/4a/21/64/64214abeeb4c191311cc7451/d128tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cd/7e/de/62/62de7ecd148ec6b71020ffac/d128tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/29/7e/de/62/62de7e2933927e49dbf3272b/d128tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Suitable Inserts","value":"VBMT 1103"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.098 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJBR 1010"},{"@type":"PropertyValue","name":"Shank Designation","value":"J11-F"},{"@type":"PropertyValue","name":"Width","value":"10 mm"},{"@type":"PropertyValue","name":"Height","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"VBMT 1103 indexable inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93°."}},{"@type":"Question","name":"Is the holder right- or left-hand?","acceptedAnswer":{"@type":"Answer","text":"The holder is right-hand."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SVJBR 1010."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d128tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SVJB Series"},{"@type":"Thing","name":"Indexable Inserts VBMT 1103 Compatibility"},{"@type":"Thing","name":"Right-Hand Cutting Applications"}],"mentions":[{"@type":"Thing","name":"J11-F Shank"},{"@type":"Thing","name":"SVJBR 1010 ISO Designation"},{"@type":"Thing","name":"110 mm Overall Length"},{"@type":"Thing","name":"93° Cutting Angle"}]}]}

Turning Holder (Klemmhalter) from Teknik Makina The Turning Holder (Klemmhalter) is a robust clamping solution for VCMT 1103 indexable inserts, designed for accurate, repeatable turning operations in industrial and workshop environments. Compatible with VCMT 1103 indexable inserts Total Length 110 mm for stable overhang ISO designation SVJCR 1010 for standard tooling systems Cut Head Width 12 mm for reliable insert support Right-hand cutting direction with 93° cutting angle Precision clamping for consistent Turning results The Turning Holder delivers stable clamping for VCMT 1103 inserts, minimising tool movement and vibration during cuts. Because the holder is built to the SVJCR 1010 ISO specification, it integrates smoothly into common toolposts and turret systems, ensuring predictable geometry and repeatable part quality. This rigidity translates directly into improved surface finish and longer Insert life. Geometry engineered for predictable chip flow and access With a 93° cutting angle and a right-hand cutting orientation, the holder supports cutting strategies that prioritise clearance and chip evacuation. The 12 mm Cut Head Width provides secure support for the insert corner, reducing the risk of chipping under moderate cutting loads. These design choices benefit machinists who need consistent performance when working on medium-duty turning applications. Built for workshops and production environments Designed for practicality, this Turning Holder suits both small job shops and larger production lines that use VCMT 1103 indexable inserts. Quick mounting and standard ISO compatibility mean setup time is reduced, so machines spend more time cutting and less time in adjustment. Technicians and maintenance staff will appreciate the straightforward interface with common toolholders and inserts. Manufacturer quality and compatibility details Teknik Makina manufactures the holder to provide dependable everyday performance; the component dimensions—10 mm width and 10 mm height for the tool shank—ensure a compact but rigid profile suitable for constrained setups. The holder’s 110 mm total length balances reach and stiffness, helping to minimise deflection where space or part geometry demands some overhang. For reliable, industry-grade clamping choose Teknik Makina’s Turning Holder for VCMT 1103 inserts — for technical advice and personalised recommendations contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Designation: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D239TM For indexable inserts: VCMT 1103 Total length: 110 mm ISO designation: SVJCR 1010 Secondary designation: J11 Width: 10 mm Height: 10 mm Cut Head Width: 12 mm Cutting direction: right Cutting angle: 93° GTIN: 4061905153846 Manufacturer / Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person / Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with VCMT 1103 indexable inserts; the holder’s design and SVJCR 1010 ISO designation ensure correct seating and reliable performance with these inserts. Can the Teknik Makina Turning Holder be used for fine finishing operations? Yes, the Teknik Makina Turning Holder supports fine finishing when paired with appropriate VCMT 1103 grades and cutting parameters, thanks to its stable clamping and a 93° cutting angle that promote consistent surface quality. How do I get support or confirm suitability for my machine with the Turning Holder (Klemmhalter)? If you are unsure whether the Turning Holder (Klemmhalter) from Teknik Makina meets your requirements, METAV Werkzeuge provides expert consultation and can supply supplementary technical data; contact them at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271. 110mm SVJC for VCMT 1103 Indexable Inserts, 93° Cutting Angle - Teknik Makina

Klemmhalter (Turning Holder) — SVJC for VCMT Indexable Inserts by Teknik Makina The Klemmhalter (Turning Holder) secures VCMT 1103 indexable inserts for precise right-hand turning operations on lathes and turning centers. Designed for VCMT 1103 indexable inserts ISO SVJCR 1212 shank for standardized mounting 110 mm overall length for stable overhang 93° cutting angle for controlled chip flow Right-hand orientation for conventional turning Robust Design for Consistent Clamping and Stability Crafted to provide a reliable clamping solution, this toolholder offers a sturdy construction that reduces vibration and runout during machining. The holder’s 110 mm overall length balances accessibility and rigidity, enabling longer reach without sacrificing stability. Thanks to the SVJCR 1212 ISO designation, the clamping interface matches common turret and toolpost systems, so set-up time is minimized and repeatability is improved. Users benefit from fewer interruptions and more consistent part quality. Precision Fit for VCMT 1103 Inserts The clamping geometry is adapted specifically for VCMT 1103 indexable inserts, ensuring secure seating and accurate cutting edge positioning. With a 93° cutting angle and a right-hand cutting direction, the holder supports controlled chip formation and predictable tool engagement. For operators, this means improved surface finish and dimensional adherence with each pass. If unfamiliar, an indexable insert is a replaceable cutting tip that keeps toolholding costs low while maintaining high machining performance. Practical Application and Compatibility This holder is particularly suitable for turning tasks where a standardized shank and predictable tool behavior are required. It accepts inserts identified as VCMT 1103 and mates to fixtures compatible with the SVJCR 1212 form factor. Because of its dimensions and cut geometry, the unit is well-suited for a variety of steels and general turning operations where right-hand cutting is applied. The clear nominal parameters simplify tool selection and help technicians plan setups efficiently. Who Benefits and How to Use It Workshops, small-series manufacturers, and maintenance departments will find this holder useful when reproducible turning results are essential. Operators should verify turret or toolpost compatibility with the SVJCR 1212 designation before installation. Regular inspection of clamp seating and insert torque will prolong service life and maintain machining accuracy. For questions about optimal insert grades or application-specific advice, professional consultation is available. For precision turning on standard turrets, choose the Teknik Makina Klemmhalter (Turning Holder); METAV Werkzeuge provides expert advice and support — contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D240TM For Indexable Inserts: VCMT 1103 Compatible Inserts: VCMT 1103 Overall Length: 110 mm Weight: 0.135 kg ISO Designation: SVJCR 1212 Secondary Designation: J11 Width: 12 mm Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: Right Cutting Angle: 93° GTIN: 4061905153853 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter (Turning Holder) from Teknik Makina? The Klemmhalter (Turning Holder) by Teknik Makina is designed to accept VCMT 1103 indexable inserts, providing a secure seat and correct cutting edge position for those specific insert types. Is the Klemmhalter suitable for left-hand turning? The Teknik Makina Klemmhalter (Turning Holder) is specified for right-hand cutting; it is intended for conventional right-hand turning operations rather than left-hand applications. Which ISO designation corresponds to this holder and why does it matter? The holder carries the SVJCR 1212 ISO designation, which denotes the shank and mounting form; matching this designation ensures compatibility with standard turrets and toolposts. Who can I contact at METAV Werkzeuge for technical questions about the Klemmhalter? For application guidance or additional technical data about the Klemmhalter (Turning Holder) from Teknik Makina, contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930, or reach out via WhatsApp at +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D240TM","sku":"D240TM","mpn":"D240TM","gtin13":"4061905153853","name":"Turning Holder SVJCR 1212 93° VCMT 1103","description":"SVJC for VCMT indexable inserts; 110 mm overall length; ISO SVJCR 1212; for VCMT 1103 inserts; right-hand, 93° cutting angle; width 12 mm, height 12 mm; manufacturer: Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/e2/08/35/64/643508e279db570c35c6c770/d239tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cd/7e/de/62/62de7ecd0f56dbb4de4dbf3b/d239tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/29/7e/de/62/62de7e29bd24461b3d5f7a13/d239tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"VCMT 1103"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.135 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJCR 1212"},{"@type":"PropertyValue","name":"Shank Designation","value":"J11"},{"@type":"PropertyValue","name":"Width","value":"12 mm"},{"@type":"PropertyValue","name":"Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"VCMT 1103 indexable inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"The overall length is 110 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SVJCR 1212."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The cutting angle is 93°."}},{"@type":"Question","name":"Is this right- or left-hand?","acceptedAnswer":{"@type":"Answer","text":"This holder is right-hand."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Allround Turning Applications"},{"@type":"Thing","name":"Workshop and Production Use"}],"mentions":[{"@type":"Thing","name":"VCMT 1103 Inserts"},{"@type":"Thing","name":"ISO SVJCR 1212"},{"@type":"Thing","name":"Shank J11"}]}]}

Turning Holder SVJC for VCMT Indexable Inserts by Teknik Makina The Turning Holder SVJC for VCMT Indexable Inserts is a precision clamping solution for left-hand turning operations with internal coolant, optimised for VCMT 1103 indexable inserts. Compact design SVJCL 1212 for secure mounting Compatible with VCMT 1103 indexable inserts Internal coolant for improved tool life Left-hand cutting orientation for specialised turning Robust clamp with Torx T8 fastening Consistent clamping for repeatable turning results The Turning Holder delivers Precision Clamping through a compact SVJCL 1212 design that secures VCMT-style inserts reliably. A firm clamp interface minimises axial and radial play, which reduces vibration and supports consistent surface finish on turned components. This stability is particularly advantageous when machining small diameters or performing finishing passes where dimensional accuracy matters. Optimised for VCMT 1103 inserts and left-hand applications Compatibility with VCMT 1103 indexable inserts ensures straightforward insert replacement and consistent cutting geometry. The holder’s left-hand cutting orientation makes it suitable for operations that require a mirrored tool path or specific machine setups. Users benefit from predictable chip flow and repeatable cutting angles thanks to the defined 93° cutting angle. Internal coolant improves tool life and process reliability Equipped with Internal Coolant, the holder channels cutting fluid directly to the cutting edge, helping to reduce heat buildup and flush chips away from the cutting zone. This targeted cooling supports longer insert life and steadier cutting conditions, which translates into fewer tool changes and increased uptime for production runs. Simple installation and maintenance for workshop efficiency The clamping system is designed for quick mounting and service: the holder uses a Torx T8 key and an M2.5×6.5 screw for secure fixation, enabling fast insert changes and straightforward maintenance. The compact dimensions (Overall Length 110 mm, Overall Height 12 mm, Holder Width 12 mm, Head Width 16 mm) make the tool easy to position in tight setups while maintaining robust engagement. Who benefits from this holder This tool is aimed at machinists and production shops that require reliable, repeatable turning with VCMT inserts—especially in setups that demand left-hand cutting or internal coolant delivery. The holder supports applications from precision finishing to light-medium turning tasks where tool life and consistency are priorities. Choose Teknik Makina’s robust Turning Holder to enhance machining stability — for personalised technical advice and to confirm fitment contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Turning Holder SVJC for VCMT Indexable Inserts Brand: Teknik Makina SKU: AP529TM Alternative designation: SVJCL 1212 Compatible inserts: VCMT 1103 Overall length: 110 mm Overall height: 12 mm Holder width: 12 mm Head (cutting) width: 16 mm Cutting height: 32 mm Cutting direction: left Cutting angle: 93° Tool shank designation: J11-IK Internal coolant: Yes Torx key: T8 Torx screw: M2.5×6.5 Manufacturer or Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person or Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder SVJC for VCMT Indexable Inserts by Teknik Makina is designed for VCMT 1103 inserts; using the specified insert type ensures correct seating and cutting geometry. Does this holder provide coolant to the cutting edge? Yes, the Teknik Makina Turning Holder features internal coolant, which delivers fluid directly toward the insert to help control temperature and chip evacuation. Is the Turning Holder suitable for right-hand turning? The Turning Holder SVJC is specified for left-hand cutting; for right-hand operations a corresponding right-hand holder should be selected. Which fastening parts are required for the clamp? Assembly and insert clamping use a Torx T8 tool and an M2.5×6.5 screw, enabling secure fixation and straightforward insert changes. Who can help if I’m unsure about compatibility or setup? If you need assistance confirming whether the Turning Holder SVJC for VCMT Indexable Inserts fits your machine or application, METAV Werkzeuge offers expert advice — contact info@metav-werkzeuge.com or phone +49 2822 7131930. 110mm SVJC Turning Holder for VCMT Indexable Inserts, Internal Coolant, Left Cut, 12x12mm, 16mm Head Width - Teknik Makina

Clamping Holder — Turning Holder for CCMT 0602 Inserts by Teknik Makina The Clamping Holder is a robust Turning Holder designed for CCMT 0602 indexable inserts, offering secure clamping and precise right-hand turning for workshop and CNC lathe applications. Clamping Holder for CC-- 0602 inserts 110 mm Overall Length ISO SCLCR 1010 designation Right-hand turning, 95° cutting angle 12 mm Cutting Head Width Maximum Precision and Consistent Chip Control The holder delivers consistent clamping that stabilises the insert during machining, translating into reproducible results and reduced rework. With a 95° cutting angle and a design optimised for right-hand operation, the toolholder minimises vibration and supports predictable chip flow, which is particularly relevant for finishing passes and dimensional accuracy. The compatibility with CCMT 0602 inserts ensures a broad selection of grades and geometries for varied materials. Compact dimensions for tight set-ups and rapid tool changes Featuring an 110 mm Overall Length and a compact profile, the tool fits into confined turret stations and short overhang arrangements without sacrificing rigidity. The moderate 12 mm Cutting Head Width reduces interference while allowing reliable insert seating. For operators who need quick tool changes, the compact geometry simplifies access and reduces downtime, making the unit suitable for small-batch production and flexible workshop environments. Clear specification and part identification for easy selection The holder is specified under ISO SCLCR 1010, a standardised designation that helps you match geometry and clamping style to your machine setup. For users unfamiliar with ISO codes: this identifier denotes the toolholder family and size, enabling straightforward cross-referencing when ordering or replacing tooling. The second designation J06 further assists in selecting the correct shank and head variant for your turret or toolpost. Practical handling, installation and workshop support Installation is straightforward when the CCMT 0602 insert is seated and the clamp securely tightened; the holder’s dimensions (Width 10 mm, Height 10 mm) and guidance surfaces ensure repeatable positioning. For questions on fitment, recommended screw types or compatibility with specific turret interfaces, Teknik Makina products are backed by competent advice from METAV Werkzeuge. Professional support helps reduce setup time and avoids incorrect mounting that could affect tool life. We recommend the Teknik Makina Clamping Holder for precision turning tasks where rigidity and reproducibility matter most — for expert advice or application-specific guidance, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Bezeichnung: Clamping Holder Marke: Teknik Makina SKU: D398TM Compatible Inserts: CC-- 0602 Overall Length: 110 mm Weight: 0.105 kg ISO Designation: SCLCR 1010 Secondary Designation: J06 Width: 10 mm Height: 10 mm Cutting Head Width: 12 mm Cutting Angle: 95° Cutting Direction: right GTIN: 4061905153006 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ How do I know the Clamping Holder from Teknik Makina fits my machine? Check that your turret or toolpost accepts the SCLCR 1010 geometry and that the Clamping Holder dimensions (110 mm length, 10 mm width and height) are compatible; for confirmation, Teknik Makina specifications and METAV Werkzeuge can advise on fitment. Which inserts are compatible with this Turning Holder by Teknik Makina? The turning holder is made for CCMT 0602 indexable inserts; selecting the correct insert grade for material and cutting conditions will maximise the performance of the Teknik Makina Turning Holder. Is the Clamping Holder suitable for right-hand and left-hand turning? This specific Clamping Holder from Teknik Makina is designed for right-hand turning with a 95° cutting angle; for left-hand turning alternatives, please consult METAV Werkzeuge. Who can I contact for technical advice about the Teknik Makina Turning Holder? METAV Werkzeuge provides detailed, competent support for the Teknik Makina Turning Holder; email info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and technical data. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D398TM","sku":"D398TM","mpn":"D398TM","gtin13":"4061905153006","name":"Turning Holder SCLCR 1010 95° CC-- 0602","description":"SCLC for CCMT indexable inserts; 110 mm overall length; 10 mm width; 10 mm height; 12 mm cutting head width; 95° cutting angle; right-hand cutting; Manufacturer: Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/9d/18/35/64/6435189d79db570c35c6c987/d398tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d1/7e/de/62/62de7ed10aced56449540ec3/d398tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2e/7e/de/62/62de7e2e0aced56449540e8b/d398tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Compatible Inserts","value":"CC-- 0602"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.105 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SCLCR 1010"},{"@type":"PropertyValue","name":"Shank Designation","value":"J06"},{"@type":"PropertyValue","name":"Width","value":"10 mm"},{"@type":"PropertyValue","name":"Height","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with CC-- 0602 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What are the key dimensions?","acceptedAnswer":{"@type":"Answer","text":"Width 10 mm, height 10 mm, cutting head width 12 mm."}},{"@type":"Question","name":"What is the cutting angle and direction?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle 95° with right-hand cutting."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d398tm","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"SCLC for CCMT indexable inserts"},{"@type":"Thing","name":"Right-Hand Turning Tools"}],"mentions":[{"@type":"Thing","name":"SCLCR 1010"},{"@type":"Thing","name":"CC-- 0602 inserts"},{"@type":"Thing","name":"J06 shank designation"}]}]}

Turning Holder – SVJC for VCMT Indexable Inserts by Teknik Makina The Turning Holder (SVJC for VCMT indexable inserts) is a left‑hand turning tool designed for stable, precise machining with VCMT 1103 inserts in professional workshop environments. Turning Holder for VCMT 1103 indexable inserts ISO SVJCL 1212 shank for reliable clamping 110 mm overall length for stable turning 93° cutting angle for precise left‑hand cuts 12 x 12 mm shank with 16 mm cutting head width Exceptional Precision through Optimised Cutting Geometry Engineered for demanding turning tasks, this holder delivers consistent results thanks to its 93° cutting angle, which supports accurate chip formation and predictable tool behaviour during left‑hand operations. The geometry reduces vibration and improves surface finish, so machinists can rely on repeatable tolerances even in interrupted cuts. This focusing on geometry translates into time savings at the machine and fewer rework cycles. Reliable Compatibility with VCMT 1103 Inserts Compatibility is straightforward: the design accepts VCMT 1103 indexable inserts and conforms to the ISO SVJCL 1212 shank designation, offering a standardised interface for quick insert changes. For users unfamiliar with insert codes: VCMT describes a rhombic insert shape with a stable cutting edge, and the 1103 size denotes the insert dimensions suited for medium‑duty turning. The clear match between holder and insert simplifies tool selection and reduces setup errors. Robust Shank Dimensions for Workshop Stability With an 110 mm overall length and a 12 x 12 mm shank, the holder provides a compact but rigid toolbody that minimises overhang while maintaining accessibility in confined toolposts. The 16 mm cutting head width ensures the insert is well supported, which helps to lower deflection under load and improves tool life. These dimensions are chosen to balance reach and stiffness, making the holder suitable for a wide range of turning applications where stability matters. Designed for Professional Use and Easy Integration This product targets professional machinists and small to medium workshops seeking a dependable holder for left‑hand turning operations. Manufactured by Teknik Makina, the component is intended for integration into existing tooling systems without requiring special adapters. If you require guidance on selecting the correct insert grade or verifying compatibility with your lathe setup, technical support is available to help specify the best combination for your material and cutting conditions. We recommend Teknik Makina’s Turning Holder for precision left‑hand turning tasks — for personalised technical advice and support contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Bezeichnung: Turning Holder Brand / Hersteller: Teknik Makina SKU: D384TM Compatible Inserts: VCMT 1103 ISO Designation: SVJCL 1212 Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: left Cutting Angle: 93° Weight: 0.135 kg GTIN: 4061905153938 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which size is recommended? The Turning Holder by Teknik Makina is designed for VCMT 1103 indexable inserts; VCMT 1103 is the recommended size to ensure correct seating and optimum cutting performance with this holder. Can the Teknik Makina Turning Holder be used for right‑hand turning? This specific Turning Holder is configured for left‑hand cutting direction; for right‑hand operations, a corresponding right‑hand holder from Teknik Makina should be selected to match your turning orientation. How does the SVJCL 1212 designation affect compatibility and mounting? The SVJCL 1212 ISO designation indicates the shank form and clamping interface, ensuring the Teknik Makina Turning Holder fits standard toolposts and accepts compatible inserts with predictable clamping and repeatability. Is technical advice available for selecting insert grades for the Turning Holder? Yes, METAV Werkzeuge provides expert consultation for tooling setups; for recommendations on insert grade and cutting parameters for the Turning Holder by Teknik Makina, contact info@metav-werkzeuge.com or call +49 2822 7131930. 93° Left SVJCL 1212 Turning Holder for VCMT 1103, 110mm Length - Teknik Makina

Detailed Technical Data: Item: Indexable Drill Brand: Teknik Makina Order Number: U34TM usable with XCGT 050204 Indexable Inserts of Taegutec Diameter: 11mm Total length: 92mm Diameter Connection: 16mm Weight: 0.112kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Data: Item: Mini Groving Holder ISO Code: S16 D11 K30 L130 Brand: Teknik Makina Order Number: K804TM usable with NFTG 16 Indexable Inserts of Korloy Diameter: 11mm Total length: 130mm Cutting Height: 30mm Weight: 0.348kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Comprehensive Technical Specifications: Order Number: U812TM Item: Indexable Drill usable with SPMG 0502 Indexable Inserts of Taegutec und YG-1 Brand: Teknik Makina Metric Information: Diameter: 12,5mm Weight: 0.158kg Total length: 106mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Characteristics: Order Number: TKB148TM Item: Boring Tool usable with CCMT 1204 Indexable Inserts Brand: Teknik Makina Quantitative Characteristics: Diameter: 120-170mm Weight: 3.281kg Total length: 139mm Diameter Connection: 40mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Specifications: Order Number: THB100TM Item: Boring Tool usable with CCMT 09T3 Indexable Inserts Brand: Teknik Makina Metric Information: Diameter: 120-190mm Weight: 5.06kg Total length: 163.7mm Diameter Connection: 40mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Detailed Technical Data: Order Number: T332TM Item: Face Mill usable with SNKX 1206 Indexable Inserts of Böhlerit, Korloy und Palbit Brand: Teknik Makina Quantitative Characteristics: Diameter: 125mm Cutting Edges: 10 Weight: 3.78kg Total length: 63mm Diameter Connection: 40mm Diameter max.: 138mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: T305TM Item: Face Mill usable with SDHT 1204 Indexable Inserts Brand: Teknik Makina Structural Details: Diameter: 125mm Cutting Edges: 8 Weight: 4.095kg Total length: 62mm Diameter Connection: 40mm Diameter max.: 139mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Clamp Holder for ER Indexable Inserts with Coolant — Clamp Holder by Teknik Makina The Clamp Holder is a robust turning tool designed to securely retain 16 ER indexable inserts with integrated internal coolant for improved chip control in metalworking operations. For 16 ER indexable inserts Internal coolant improves chip evacuation 125 mm overall length for compact rigidity 20x20 shank for secure mounting Precision clamping for consistent machining results The Clamp Holder from Teknik Makina provides stable clamping and precise positioning of indexable inserts, ensuring repeatable machining quality. Designed for 16 ER ISO inserts, the holder's accurate pocket geometry keeps the cutting edge fixed during heavy cuts, which reduces chatter and improves surface finish. Fast replacement of the insert is possible thanks to accessible mounting screws, so cycle times are minimized and uptime increases. Internal coolant that prolongs tool life and improves surfaces Equipped with Internal Coolant, this tool directs coolant to the cutting edge through internal channels, promoting efficient chip evacuation and reduced cutting temperatures. Lower thermal load means less wear on the insert and a more consistent tool life. For operations where surface quality is critical, targeted coolant flow supports the formation of a stable cutting zone and helps avoid built-up edge formation on the insert. Faster changeovers and lower operating costs A straightforward clamping concept reduces setup time and simplifies maintenance, allowing workshops to change only the worn insert rather than the entire tool. The holder uses Torx drive engagement for secure fixation and uncomplicated servicing, which helps keep Rüstzeiten (setup times) short and operating costs down. The compact 125 mm length and 20x20 shank size combine rigidity with accessibility in confined tool holders. Ideal applications and who benefits most This Clamp Holder is suited for job shops, production lines and precision turning environments that rely on indexable tooling for efficiency. Operators looking to optimize productivity with modular tooling will appreciate the combination of coolant capability and compatibility with 16 ER inserts. If you require advice on matching inserts or adapting toolholders to specific machines, METAV Werkzeuge offers expert consultation to support your selection and setup. Choose Teknik Makina's Clamp Holder with Internal Coolant for dependable performance — and contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Clamp Holder for ER Indexable Inserts with Coolant Brand: Teknik Makina SKU: AP602TM Suitable Inserts: 16 ER Internal Coolant: Yes Dimension (Shank): 20x20 mm Overall Length: 125 mm Passscheibe: TA060 U-Platte: TA061 Torx Key: T15 Torx Screw: M3,5x11 GTIN: 4061905073922 Availability: In Stock Condition: new ECLASS: 21181004 Category: Planmesserkopf (Zerspanen) Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder from Teknik Makina and for which operations is it intended? The Clamp Holder by Teknik Makina is designed for 16 ER indexable inserts and is suitable for turning operations that benefit from modular insert systems and internal coolant to improve chip evacuation and tool life. Does the Clamp Holder include internal coolant channels and how does that help? Yes, the Teknik Makina Clamp Holder features internal coolant delivery; this channels coolant directly to the cutting edge, which lowers temperatures, enhances chip control and extends the service life of the insert. How quickly can I replace an insert in the Teknik Makina Clamp Holder? Insert replacement in the Clamp Holder is designed to be fast and straightforward, with accessible mounting screws for quick changeovers, reducing downtime and supporting continuous production. Can METAV Werkzeuge advise on choosing the right insert or toolholder configuration? METAV Werkzeuge provides comprehensive consultation and can assist in selecting the appropriate insert geometry and toolholder setup for your application; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP602TM","sku":"AP602TM","mpn":"AP602TM","gtin13":"4061905073922","name":"Clamp Holder for ER Indexable Inserts With Coolant AP602TM","description":"Clamp holder for ER indexable inserts with internal coolant, fits 16 ER, 20x20, 125 mm overall length; robust clamping and quick insert change.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/82/6d/1d/64/641d6d82ff739ebda68866a7/ap602tm-main.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Compatible Inserts","value":"16 ER"},{"@type":"PropertyValue","name":"Dimension","value":"20x20"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Internal Coolant","value":"yes"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this clamp holder?","acceptedAnswer":{"@type":"Answer","text":"Fits 16 ER indexable inserts."}},{"@type":"Question","name":"Does the holder have internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant channels for improved chip evacuation and tool life."}},{"@type":"Question","name":"What are the dimensions and length?","acceptedAnswer":{"@type":"Answer","text":"Dimension 20x20 with an overall length of 125 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/clamp-holder-teknik-makina-order-online","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Clamp Holder Series"},{"@type":"Thing","name":"ER Indexable Inserts Compatibility"},{"@type":"Thing","name":"Internal Coolant Feature"}],"mentions":[{"@type":"Thing","name":"TA060 Passscheibe"},{"@type":"Thing","name":"TA061 U Plate"},{"@type":"Thing","name":"Suitable for deep drilling and chip evacuation"}]}]}

Turning Holder (Klemmhalter) — Turning Holder for CN-- 1204 Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a robust Toolholder designed for precision external turning with CN-- 1204 indexable inserts, suitable for versatile workshop and production applications. Turning Holder DCLNL 2020 for CN-- 1204 inserts Overall Length 125 mm for extended reach 95° Cutting Angle for accurate profiling Left-hand cutting direction for specific operations Shank designation K12 for secure mounting Precision clamping for reliable Turning results Built to deliver consistent contact and repeatable geometries, this Turning Holder features the DCLNL 2020 ISO designation and is optimized for CN-- 1204 indexable inserts. The 125 mm Overall Length increases Reach without compromising Rigidity, while the 95° Cutting Angle supports accurate Profiling on external surfaces. This combination reduces Setup time and helps achieve consistent Surface Finish even in batch production. Stable mounting and clear Machine compatibility Featuring a Shank designation K12 and compact Cross-Section dimensions of 20 mm Width and 20 mm Height, the Holder ensures secure seating in standard tool posts. The Schneidkopf Width of 25 mm provides a solid Seat for the Insert, and the Left cutting direction is indicated for specific turning operations. These measurable parameters simplify selection and guarantee compatibility with many common lathe set-ups. Who benefits from this toolholder Small job shops, maintenance Workshops and precision Turning lines benefit from the clear specification and robust design of this Holder. As a component by Teknik Makina, it is intended for users who require reliable Clamp Force and quick Insert changes while keeping machine Downtime minimal. The toolholder design supports straightforward Handling and contributes to predictable production Output. Practical notes on Inserts and designation The DCLNL 2020 designation describes the Holder geometry and clamping orientation; CN-- 1204 refers to the Insert format commonly used for finishing and semi-finishing passes. For operators new to Indexable Insert systems: CN-- 1204 Inserts are rectangular turning grades designed for lateral support and easy replacement. Using the correct Insert grade for the workpiece material helps extend Tool Life and keeps Cutting Forces controlled. For tailored advice on application or compatibility with your machine, contact METAV Werkzeuge — we provide expert consultation and technical support: info@metav-werkzeuge.com, +49 2822 7131930. Technical Data Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D301TM ISO Bezeichnung: DCLNL 2020 Passende Wendeplatten: CN-- 1204 Bezeichnung 2 / Shank: K12 Gesamtlänge: 125 mm Breite: 20 mm Höhe: 20 mm Schneidekopf Breite: 25 mm Schneidenhöhe: 30 mm Schnittwinkel: 95° Schnittrichtung: left Gewicht: 0.441 kg GTIN: 4061905151415 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder and who produces it? The Turning Holder from Teknik Makina is designed for CN-- 1204 indexable inserts; Teknik Makina supplies the Holder geometry compatible with these inserts. Is the Turning Holder suitable for left-hand turning tasks? Yes, the Teknik Makina Turning Holder is specified with a left cutting direction and a 95° cutting angle, making it appropriate for left-hand external Turning operations. How long is the Turning Holder and what shank does it use? The Turning Holder has an Overall Length of 125 mm and uses the Shank designation K12, ensuring stable mounting in compatible tool posts. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D301TM","sku":"D301TM","mpn":"D301TM","gtin13":"4061905151415","name":"125mm DCLN Turning Holder for CN-- 1204 Indexable Inserts","description":"125mm DCLN turning holder for CN-- 1204 indexable inserts; 95° cutting angle; ISO designation DCLNL 2020; 20mm width/height; 25mm cutting head width; left-hand cutting; 0.441 kg; Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/39/7e/de/62/62de7e390f56dbb4de4dbef9/d301tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/04/8d/e2/62/62e28d040f56dbb4de4e1285/d301tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d7/7e/de/62/62de7ed7148ec6b71020ffb4/d301tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Length","value":"125 mm"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"CN-- 1204 indexable inserts"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"ISO Designation","value":"DCLNL 2020"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"},{"@type":"PropertyValue","name":"Weight","value":"0.441 kg"},{"@type":"PropertyValue","name":"Material","value":"Steel"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for CN-- 1204 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 95°."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation DCLNL 2020."}},{"@type":"Question","name":"What are the dimensions of the holder?","acceptedAnswer":{"@type":"Answer","text":"Width 20 mm, height 20 mm, cutting head width 25 mm."}},{"@type":"Question","name":"What is the cutting direction?","acceptedAnswer":{"@type":"Answer","text":"Left-hand cutting direction."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/125mm-dcln-turning-holder-d301tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"DCLN Turning Holder Series"},{"@type":"Thing","name":"Indexable Insert Turning Solutions"},{"@type":"Thing","name":"Workshop and Lathe Applications"}],"mentions":[{"@type":"Thing","name":"CN-- 1204 indexable inserts"},{"@type":"Thing","name":"ISO DCLNL 2020"},{"@type":"Thing","name":"Left-hand turning"}]}]}

Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a right-hand clamp holder designed for CN-- indexable inserts, supplying precise and stable tool positioning for metalturning applications. Compatible with CN-- 1204 inserts Supports CN-- 1606 and CN-- 1906 sizes 95° Cutting Angle for consistent chip control ISO DCLNR 2020 format for standard toolposts 125 mm overall length for workshop versatility Consistent Cutting with a 95° Geometry The Turning Holder from Teknik Makina features a 95° cutting angle that delivers reliable contact between Insert and Workpiece, reducing vibration and improving surface finish. This specific geometry supports stable chip flow and predictable tool engagement, which helps to extend Insert life and maintain process repeatability. For workshops focused on dimensional accuracy, the defined cutting angle reduces setup iterations and contributes to faster cycle times. Broad Insert Compatibility and Clear Sizing Designed to accept CN-- 1204, CN-- 1606 and CN-- 1906 indexable inserts, this Clamp holder offers flexibility across a range of turning tasks. The toolholder’s 125 mm overall length and a cutting-head width of 25 mm pair with a 20 mm body width and height to fit common turret stations while keeping the centre height consistent. For those less familiar: CN-- denotes a negative, 80° diamond-shaped insert with chipbreaker options; compatible sizes indicate Insert footprint and thickness. This compatibility reduces the need for multiple specialized holders, simplifying inventory. Robust Design for Professional Workshops The holder is built to the ISO designation DCLNR 2020, which indicates a right-hand (R) clamping style with a 20 × 20 mm shank—favoured for stable clamping and easy interchange on standard toolposts. Weighing approximately 0.441 kg, the component balances rigidity and manageable handling during tool changes. The right-hand cutting direction and precise clamping geometry make this Clamp holder suitable for machinists and maintenance teams who demand repeatable set-ups and straightforward Insert replacement. Choose the Teknik Makina Turning Holder for dependable 95° performance — for personalised technical advice or to confirm fitment contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271; METAV offers competent consultation and support for professional tooling decisions. Key Technical Specifications Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D166-1TM ISO Bezeichnung: DCLNR 2020 Bezeichnung 2: K12 Passende Wendeschneidplatten / Compatible indexable inserts: CN-- 1204, CN-- 1606, CN-- 1906 Gesamtlänge / Overall length: 125 mm Breite / Width: 20 mm Höhe / Height: 20 mm Schneidekopf Breite / Cutting head width: 25 mm Schnittwinkel / Cutting angle: 95° Schnittrichtung / Cutting direction: right Schneidenhöhe / Cutting height: 30 mm Gewicht / Weight: 0.441 kg GTIN: 4061905151408 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and what does CN-- mean? The Teknik Makina Turning Holder accepts CN-- 1204, CN-- 1606 and CN-- 1906 indexable inserts; CN-- denotes a negative, 80° diamond-shaped Insert geometry commonly used for robust turning and allows a range of chipbreaker or geometry options. Is the Teknik Makina Turning Holder suitable for standard toolposts? Yes, the Turning Holder carries the ISO designation DCLNR 2020 which corresponds to a 20 × 20 mm shank and is designed for straightforward mounting on standard toolposts used in many lathes and turret systems. How does the 95° cutting angle benefit machining with this Clamp holder? The 95° cutting angle on the Teknik Makina Clamp holder improves chip control and contact stability, which typically leads to better surface finish and longer Insert life during continuous turning operations. Can METAV Werkzeuge provide help with selecting the right Turning Holder model? METAV Werkzeuge offers expert advice for tooling selection; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support to ensure the Teknik Makina Turning Holder meets your workshop requirements. 95° 125mm DCLN Turning Holder for CN-- 1204 Indexable Inserts, DCLNR 2020 — Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina Turning Holder (Klemmhalter) is a precision tool holder designed for DN-- 1506 indexable inserts, providing secure clamping and stable performance for left-hand turning operations. For DN-- 1506 indexable inserts 125 mm overall length for extended reach 93° cutting angle for improved chip control Left-hand cutting direction compatibility ISO DDJNL 2020 designation for standardized fit Secure compatibility with DN-- 1506 inserts for consistent results This tool clamp is built specifically to accept DN-- 1506 indexable inserts, ensuring repeatable seating and minimal runout during cutting. Indexable inserts are replaceable carbide tips that allow fast swap-out without regrinding; the holder’s geometry guarantees a stable contact surface so insert seating remains precise over many tool changes. As a result, setup times are reduced and part-to-part consistency is improved. Geometry tuned for stable turning and reliable chip behaviour The turning tool features a 93° cutting angle and left-hand cutting orientation that combine to offer controlled chip flow and reduced cutting forces. A defined cutting geometry helps maintain tool life by distributing load across the insert edge, while the holder’s Cutting Head Width accommodates typical insert sizes for robust engagement. This leads to fewer tool changes and more predictable machining cycles. Compact design with practical reach and secure clamping With a 125 mm Overall Length and a compact cross-section, the clamp holder balances reach and stiffness for many lathe setups. The holder’s 20 mm Width and Height, plus a 25 mm Cutting Head Width, provide a rigid interface that resists vibration in medium-duty turning applications. The ISO designation DDJNL 2020 signals adherence to recognized tooling standards, simplifying tool selection and replacement in professional workshops. Suited for workshop production and precision turning environments Machine Shops and production lines that work with standard indexable inserts benefit from the holder’s repeatability and standardized fit. The compact footprint makes the clamp suitable for confined tool posts while its standardized mounting and ISO designation support quick integration into existing tool systems. For setups requiring left-hand turning or specific edge geometries, this holder offers a reliable base for consistent component quality. Choose the Teknik Makina Turning Holder for robust, production-ready clamping — for tailored technical advice or to confirm fit, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Klemmhalter Brand: Teknik Makina SKU: D310TM Secondary designation: DDJNR for DN-- Indexable Inserts Compatible Indexable Inserts: DN-- 1506 Overall Length: 125 mm ISO designation: DDJNL 2020 Secondary designation 2: K15 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Edge Height: 35 mm Cutting Direction: Left Cutting Angle: 93° Weight: 0.425 kg GTIN: 4061905150722 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder (Klemmhalter) compatible with DN-- 1506 inserts? Yes, the Turning Holder (Klemmhalter) from Teknik Makina is designed for DN-- 1506 indexable inserts and ensures stable seating and reliable performance with that insert type. What cutting direction does the Teknik Makina Turning Holder support? The Teknik Makina Turning Holder (Klemmhalter) is configured for left-hand cutting operations, making it suitable for applications and setups that require left-oriented tool paths. How do I get technical support or confirm suitability for my machine? For tailored technical advice and to confirm that the Turning Holder (Klemmhalter) from Teknik Makina meets your requirements, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. 125mm DDJNL 2020 Turning Holder for DN-- 1506 Indexable Inserts, 93° Cut, Left - Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a robust toolholder designed for DN-- 1504 indexable inserts, optimised for precise external turning on lathes and industrial machining applications. Turning Holder »Klemmhalter« DDJNR 2020 for DN-- 1504 125 mm Overall Length for stable mounting 20 mm Shank Width and 20 mm Height for compact fit 25 mm Cutting Head Width for secure clamping Right-hand cutting with 93° Cutting Angle Precision and Stability for consistent Turning results The Turning Holder delivers precision through its DDJNR 2020 ISO designation and a 93° Cutting Angle, which together ensure consistent contact and predictable chip flow during external turning. The clamping geometry minimises vibration and improves surface finish, so operators can rely on repeatable part quality. This stability reduces rework and increases machine uptime, making the holder an efficient choice for production environments. Compact design that supports secure toolholding With a 125 mm Overall Length and a 20 mm Shank Width combined with a 25 mm Cutting Head Width, the holder offers a compact footprint without sacrificing clamping force. The reduced overhang enhances rigidity, allowing higher feed rates and better dimensional accuracy on long runs. The compact dimensions also simplify setup in confined turret stations and enable flexible tool layouts on multi-station turrets. Suitable inserts and machining direction for targeted applications This holder is specified for DN-- 1504 indexable inserts and configured for right-hand cutting, making it particularly suited to standard external turning tasks on conventional and CNC lathes. The design supports stable insertion and straightforward indexability of the inserts, which facilitates quick tool changes and reduces downtime. Ideal Users include job shops and production facilities requiring dependable turning solutions for steel and alloy components. Built for workshop reliability with focused manufacturer support Produced by Teknik Makina, the holder reflects precise manufacturing tolerances and consistent quality control. The ISO designation DDJNR 2020 indicates compatibility with established insert geometries, simplifying tooling procurement and inventory. For more complex toolset integration or advice on insert selection, METAV Werkzeuge provides competent consultation and can assist with technical details and application optimisation. Choose Teknik Makina's robust Turning Holder for reliable, repeatable turning performance — contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Bezeichnung: Klemmhalter Marke / Hersteller: Teknik Makina SKU: D171TM For Indexable Inserts: DN-- 1504 Overall Length: 125 mm Weight: 0.426 kg ISO Designation: DDJNR 2020 Secondary Designation: K15 Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Cutting Angle: 93° Cutting Direction: right GTIN: 4061905150845 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and which insert type is recommended? The Turning Holder (Klemmhalter) from Teknik Makina is designed for DN-- 1504 indexable inserts; users typically select inserts matching DN-- 1504 geometry to ensure correct seating and optimal cutting performance with this toolholder. Is the Turning Holder suitable for high-feed production turning on CNC lathes? Yes, the Teknik Makina Turning Holder’s compact 125 mm Overall Length and rigid clamping geometry provide the stability required for higher feed rates, making it suitable for repetitive production turning on CNC lathes. How does the 93° Cutting Angle affect machining with this Turning Holder? A 93° Cutting Angle in the Teknik Makina Turning Holder results in a neutral to slightly positive approach that balances strength and chip control, which supports consistent surface finish and tool life in general turning operations. Who can advise on selecting the right Turning Holder configuration for my machine? METAV Werkzeuge offers comprehensive and competent consultation for the Teknik Makina Turning Holder; if you are unsure whether this holder meets your requirements, contact METAV at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. 93° DDJNR 2020 Turning Holder for DN-- 1504, 125mm Length, Right - Teknik Makina