Gibt es einen Hahn und Kolb Online Shop?

Combine secure clamping, compact 16 mm design and right-hand cutting geometry for reliable, repeatable turning results; the secure Torx clamp and compatibility with DCMT 11T3 inserts reduce setup time and tool changes. Order via Metav Werkzeuge or request technical advice from our specialists for seamless integration on the shop floor. SDJCR 1616 Clamp Holder — SDJC for DCMT Indexable Inserts The SDJCR 1616 Clamp Holder is a right-hand, flat-profile toolholder engineered for use with DCMT 11T3 indexable inserts in precision turning applications. Compatible with DCMT 11T3 inserts 16 mm toolholder width for compact set-ups Right-hand cutting geometry, 93° cutting angle Torx screw M3.5x8.5 with T15 key for secure clamping U-Plate TA030 and M5 retaining screw included Maximum rigidity with a compact footprint Built to offer high clamping force in a narrow space, this clamp holder combines a 16 mm Wide Shank and a low-profile Cutting Head to minimise interference on complex parts. The compact dimensions permit closer tool-to-workpiece positioning, which helps to reduce vibration and improves surface finish. By focusing on mechanical stiffness rather than oversized mass, the design supports stable machining cycles and consistent dimensional results. Faster changeovers and reliable insert retention The clamping system relies on a Torx M3.5x8.5 screw operated with a T15 key for reproducible torque and secure insert retention. This arrangement enables quicker insert replacement while maintaining the correct seat and angle, reducing downtime between operations. The flat SDJC configuration supports straightforward indexing of DCMT 11T3 inserts, keeping the process efficient and predictable in batch and one-off production. Precision geometry for controlled cutting forces A cutting angle of 93° and right-hand cut direction offer balanced force distribution during turning, which reduces deflection on slender workpieces. The toolholder is specified as SDJCR 1616, providing a standardised interface for fixtures and post designs. With the Shank designation H11-F available for mounting considerations, the holder aligns with common lathe turrets and tooling blocks to simplify integration. Practical mounting and assembly features The holder is supplied for use with the TA030 U-Plate and an M5 U-Plate Screw for secure attachment to Tool Blocks. The Torx Screw and Torx Key combination ensures consistent clamping torque and easy maintenance. These details shorten assembly time and support repeatable set-ups across multiple machines, making the component a pragmatic choice for both mixed-production cells and dedicated turning stations. Strong recommendation: choose the Teknik Makina SDJCR 1616 Clamp Holder for dependable insert clamping and compact toolroom integration — contact Metav Werkzeuge in Emmerich for supply and application support via info@metav-werkzeuge.com or +49 2822 7131930 Product Characteristics Article number: D458TM Brand: Teknik Makina Designation: SDJCR 1616 SDJC for DCMT Indexable Inserts Facts Holder Width: 16 mm Holder Height: 16 mm Cutting Head Width: 16 mm Overall Length: 100 mm Cutting Angle: 93° Weight: 0.18 kg Features Compatible Insert: DCMT 11T3 (indexable turning insert) Torx Screw: M3.5x8.5 Torx Key: T15 (for secure torque) U-Plate: TA030 U-Plate Screw: M5 Shank Designation: H11-F Cutting Direction: Right ISO Designation: SDJCR 1616 FAQ What inserts fit this clamp holder? The SDJCR 1616 Clamp Holder from Teknik Makina (SKU D458TM) is designed for DCMT 11T3 indexable inserts, providing a stable seat and correct cutting geometry for standard turning tasks. Is the clamping screw type specified for consistent torque? Yes, the clamp uses a Torx Screw M3.5x8.5 secured with a T15 Torx Key; the combination in the SDJCR 1616 design ensures reproducible clamping and easy maintenance. Can this holder be mounted on common turret systems? The SDJCR 1616 (Teknik Makina, D458TM) features a compact 16 mm Shank and Shank designation H11-F, making it suitable for many turret and tool block interfaces where a flat SDJC holder is required. What is the cutting orientation and angle of the holder? The holder is configured for a right-hand cutting direction with a 93° cutting angle, optimised to balance cutting forces and limit deflection on longer workpieces. Does the product include the necessary U-Plate parts? The technical specification lists the compatible U-Plate as TA030 and the U-Plate Screw as M5; these details support correct mounting and should be checked against your machine’s fixture requirements. Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Die Kombination aus stabiler Spannung, präziser Passform und einfacher Montage sorgt für reibungslose Fertigungsabläufe; die Kompatibilität mit DCMT 0702‑Wendeplatten und die robuste Schneidenführung machen den Einsatz besonders effizient. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie unsere technische Beratung bei Bedarf an. Klemmhalter — SDJC for DCMT Indexable Inserts Klemmhalter SDJC for DCMT Indexable Inserts: kompakter Werkzeughalter für linksschneidende Dreharbeiten mit hoher Spannstabilität und bewährter ISO‑Bezeichnung SDJCL 1616 holder for DCMT 0702 inserts Left‑hand cutting direction for external turning Cutting‑head width 20 mm for stable clamping Torx Schraube M2.5x5.5, Torx Schlüssel T8 Overall length 100 mm for compact setups Robust design for consistent clamping and repeatability Der Halter wurde so konstruiert, dass er stabile Klemmung und geringe Schwingneigung beim Drehen bietet. Die Schneidenhöhe 18 mm und die Schneidenkopfbreite von 20 mm sorgen für belastbare Unterstützung der Wendeplatte, was zu konstanteren Oberflächen und längeren Standzeiten führt. Weil die Auflagegeometrie definiert ist, wird die Schneidlage reproduzierbar gehalten und Nacharbeit reduziert. Precision machining: reliable results and clear advantages Dank der ISO‑Bezeichnung SDJCL 1616 lässt sich das Produkt leicht in bestehende Werkzeugsetups einordnen; die linksschneidende Ausführung macht es speziell für bestimmte Aussenbearbeitungen geeignet. Durch die definierte Schnittwinkelgeometrie von 93° wird das Spanverhalten positiv beeinflusst, was Prozesseffizienz und Bearbeitungsqualität steigert. Die kompakte Geometrie unterstützt Zugänglichkeit in engen Aufnahmen. Maintenance and handling that save time Montage und Wechsel der Wendeplatte sind praxisgerecht gelöst: Der Halter wird mit einer Torx Schraube (M2.5x5.5) gesichert, für die ein Torx Schlüssel T8 verwendet wird, was schnelle und sichere Eingriffe ermöglicht. Das klar strukturierte Befestigungskonzept reduziert Rüstzeiten und minimiert Fehlerquellen beim Wechseln von Schneidplatten, wodurch Produktionsunterbrechungen verringert werden. Compatibility and application scope in the workshop Dieser SDJC‑Halter ist ausgelegt für DCMT 0702‑Wendeplatten und eignet sich für wiederholte, präzise Aussenbearbeitungen in Serien‑ und Einzelfertigung. Mit einer Gesamtlänge von 100 mm und einer Gesamthöhe von 16 mm passt er in kompakte Werkzeugaufnahmen und erlaubt stabile Bearbeitung bei begrenztem Bauraum. Anwender profitieren von klaren Vorgaben zur Einbaurichtung und der einfachen Bestückung. Choose the SDJCL 1616 from Teknik Makina for dependable, precision turning — contact Metav Werkzeuge for technical advice and reliable delivery from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930. Product Data Article number: D361TM Brand: Teknik Makina Designation: Klemmhalter SDJC for DCMT Indexable Inserts ISO designation: SDJCL 1616 Drill‑shank designation: H07 Facts Holder width: 16 mm Holder height: 16 mm Cutting‑head width: 20 mm Cutting height: 18 mm Overall height: 16 mm Overall length: 100 mm Cutting angle: 93° Features Compatible inserts: DCMT 0702 Cutting direction: left Torx Schraube: M2.5x5.5 (secure fastening) Torx Schlüssel: T8 (tool for assembly) FAQ Is this holder suitable for DCMT 0702 inserts? Yes — the SDJCL 1616 holder from Teknik Makina is expressly designed to accept DCMT 0702 indexable inserts and provides the correct seat and clamping geometry for reliable results. Which screw and driver are required for mounting? The holder is secured with a Torx Schraube M2.5x5.5 and is tightened using a Torx Schlüssel T8 to ensure safe and repeatable clamping. Can the SDJCL 1616 be used for left‑hand turning only? The toolholder’s configuration and cutting direction are optimised for left‑hand external turning; alternative orientations are not specified for this item. What are the key dimensions that affect machine setup? Important installation values include an overall length of 100 mm, a cutting‑head width of 20 mm and a cutting height of 18 mm, which support compact fixture planning and toolpath calculation. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Die Kombination aus Internal Coolant, passender Aufnahme für DCMT 11T3 Wendeplatten und kompakter Bauweise sorgt für zuverlässige Bearbeitung und einfachen Werkzeugwechsel. Nutzen Sie die präzise Spannfunktion und die robuste Konstruktion für stabile, linksgängige Drehbearbeitungen; bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie unsere technische Beratung an. Clamping Holder SDJCL 1212 — SDJC for DCMT Indexable Inserts (Flat Version) The Clamping Holder SDJCL 1212 by Teknik Makina is designed for left-hand turning and secure use with DCMT 11T3 indexable inserts in precision turning applications Clamps DCMT 11T3 inserts securely Internal Coolant for improved chip evacuation Left-hand cutting orientation for specific turning tasks Compact 12 × 12 mm tool head for tight set-ups Torx Schraube M3,5×8,5 with Torx Schlüssel T15 Robust Design for Stable Clamping and Long Tool Life The Clamping Holder is built with a focus on secure retention and repeatable results. Its 12 mm Tool Head Width and Height keep the Insert seat compact, reducing overhang and vibration. The ISO designation SDJCL 1212 indicates the standardised form factor, simplifying integration into existing toolholders. As a result, machining runs are more consistent and Tool Life is extended through improved stability. Optimised Cutting Performance for Left-hand Turning Designed specifically for Left-hand cut direction, the holder accommodates a 93° Cutting Angle and a 32 mm Cutting Height, enabling controlled engagement and reliable chip formation when using DCMT 11T3 Inserts. The internal geometry supports precise positioning of the cutting edge, which translates into better surface finish and predictable material removal rates — a clear efficiency argument for production-focused workshops. Simple Assembly and Practical Service Features Installation and maintenance are straightforward: the clamping uses a Torx Schraube M3,5×8,5 tightened with Torx Schlüssel T15, while the clamping plate TA030 is secured with an M5 locating screw. The presence of Internal Coolant channels improves cooling at the cutting zone and facilitates chip evacuation, which reduces thermal load on the Insert and can prolong service intervals. These practical details reduce downtime and simplify tool changes. Ready for Workshop Use and Technical Support Compatible with DCMT 11T3 Indexable Inserts and specified under SKU AP575TM, this SDJC flat Clamping Holder is suitable for metalworking shops that require a compact, left-hand solution for turning tasks. If there is any doubt about fitment or coolant routing, our technical team at Metav Werkzeuge provides advice and configuration support to ensure the holder meets the machining requirement. Choose the Teknik Makina Clamping Holder with Internal Coolant for dependable left-hand turning — request a specification check or order assistance from Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Product Features Article number: AP575TM Brand: Teknik Makina Description: Clamping Holder SDJCL 1212 — SDJC for DCMT Indexable Inserts Facts Tool Head Width: 12 mm Tool Head Height: 12 mm Cutting Height: 32 mm Overall Height: 12 mm Overall Length: 110 mm Cutting Angle: 93° Weight: 0.11 kg Specials Innenkühlung: Yes — Internal Coolant channel for directed coolant flow Suitable for: DCMT 11T3 indexable inserts Cutting Direction: Left Clamping Plate: TA030 Torx Schraube: M3,5×8,5 Torx Schlüssel: T15 Bohrstange reference: J11-F-IC FAQ What inserts fit this clamping holder? The Clamping Holder SDJCL 1212 is specified for DCMT 11T3 indexable inserts and was engineered to secure that plate form reliably during left-hand turning operations. Does the holder support coolant-through functionality? Yes, the SDJC holder includes Internal Coolant channels that route coolant to the cutting zone to aid chip removal and reduce thermal stress on the Insert. Which fasteners are required for assembly? Assembly uses the supplied Torx Schraube M3,5×8,5, tightened with a Torx Schlüssel T15; the clamping plate is the TA030, with an M5 locating screw for fixture. Is this holder suitable for compact set-ups? With a Tool Head dimension of 12 × 12 mm and an overall length of 110 mm, the AP575TM holder is well suited to tight installations where minimising overhang is important. How can I get technical advice or confirm compatibility? Metav Werkzeuge provides technical consultation and can verify fitment for your application; contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine Internal Coolant and secure Clamping with a compact profile to ensure consistent Right-hand Turning performance; benefit from the holder’s precise Cutting Height and compatibility with DCMT 11T3 inserts. Order or request technical advice from Metav Werkzeuge for confident integration into your Workshop. AP509TM Clamping Holder — SDJC for DCMT Indexable Inserts The AP509TM Clamping Holder is a right-hand SDJC Tool designed for turning with DCMT 11T3 Indexable Inserts, offering Internal Coolant and compact, robust dimensions. AP509TM Clamping Holder SDJCR 1212 Internal Coolant for Efficient Chip Evacuation Right-hand Cutting Direction for Turning Tasks 12 mm Holder Width and 12 mm Height Suitable for DCMT 11T3 Indexable Inserts Precise Clamping for Stable Turning The Holder is engineered to provide consistent Clamping Force during Turning operations. With an ISO designation of SDJCR 1212, the design secures DCMT Inserts reliably, reducing vibration and improving Surface Finish. The reinforced Clamping geometry and a dedicated Clamping Screw interface yield repeatable results in short runs and serial production alike, enhancing Tool Life and process stability. Compact Dimensions with Clear Compatibility Compact Dimensions (12 mm Width, 12 mm Height) and a total Length of 110 mm make the Holder easy to mount on common Tool Posts. Compatibility with the U Plate TA030 and Shank Designation J11-IC simplifies integration. The combination of measured Cutting Height and a 93° Cutting Angle ensures predictable tool engagement and reproducible Turning geometry for a range of materials. Internal Coolant for Improved Chip Control Built-in Internal Coolant channels deliver coolant close to the cutting edge, aiding Chip Evacuation and cooling the Insert locally. This feature reduces Thermic Stress on the Insert and can extend edge life in demanding operations. For users less familiar with Internal Coolant, this means coolant exits through the Holder to the Insert Seat, improving Lubrication and helping maintain consistent Cutting Conditions. Assembly, Fastening and Practical Handling The Holder uses standard Fasteners for straightforward setup: the U Plate Screw is M5, the Torx Screw is M3.5x11 and the Torx Key required is T15. These common Fastener Sizes allow quick replacement of Inserts and routine Maintenance. The right-hand Cutting Direction is clearly marked, and the Holder’s Cutting Head Width of 16 mm supports a stable Insert seating for turning operations. Strongly recommended: Choose the AP509TM Clamping Holder from Teknik Makina for reliable right-hand turning with DCMT 11T3 inserts — for technical queries or fast supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Specifications Specifications SKU: AP509TM Brand: Teknik Makina Description: SDJC for DCMT Indexable Inserts ISO Designation: SDJCR 1212 U Plate: TA030 Shank Designation: J11-IC Data Holder Width: 12 mm Holder Height: 12 mm Cutting Head Width: 16 mm Cutting Height: 32 mm Total Height: 12 mm Total Length: 110 mm Cutting Angle: 93° Features Internal Coolant: internal cooling for improved chip evacuation Clamping Screw: M5 Torx Screw: M3.5x11 (Torx Screw specification) Torx Key: T15 (Torx Key for assembly) Suitable Inserts: DCMT 11T3 Shank: J11-IC Cutting Direction: Right FAQ What inserts fit this holder? The AP509TM Clamping Holder from Teknik Makina is designed for DCMT 11T3 Indexable Inserts; the SDJC Geometry secures these Inserts with stable seating for turning applications. Does the holder support internal coolant? Yes, the AP509TM includes Internal Coolant channels to guide coolant directly to the Insert, improving Chip Evacuation and reducing local Heat Build-up during Turning. Which fasteners and key are required for assembly? Assembly uses an M5 U Plate Screw and Torx Screw M3.5x11; the specified Torx Key is T15 for tightening and maintenance of the AP509TM Holder. Is the holder right- or left-hand? This AP509TM Tool is configured for Right-hand Cutting Direction and is intended for Right-hand Turning operations. Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of internal cooling, a secure clamping geometry and precise ISO designation delivers dependable turning performance with consistent chip control; order the Clamping Holder directly from Metav Werkzeuge or request technical advice from our specialists if required. Clamping Holder SVJB for VBMT Indexable Inserts — Teknik Makina The Clamping Holder SVJB for VBMT Indexable Inserts is a right‑hand, flat‑style tool designed for precise external turning with internal coolant and compatibility with VBMT 1103 inserts. Clamping Holder SVJBR 1616 ISO designation Internal cooling for consistent chip evacuation For VBMT 1103 indexable inserts Right‑hand cutting, 93° cutting angle Torx screw M2.5x6.5 with T8 key compatibility Precision and reliable clamping for repeatable turning Engineered to secure VBMT‑type inserts with a defined clamping face, this holder gives a stable seat that reduces micro‑movement under load. The SVJBR 1616 ISO designation identifies the holder geometry and ensures repeatable positioning of the insert, which translates to consistent surface finish and dimensional repeatability on serial parts. As a consequence, machinists benefit from fewer re‑settings and improved process stability. Internal cooling that improves tool life and chip flow Equipped with internal cooling, the holder directs coolant close to the cutting edge to improve lubrication and evacuate chips more effectively. This internal coolant feed reduces thermal load on the insert and can prolong tool life when turning demanding materials. For operations where chip control and cooling are critical, the integrated coolant path delivers a measurable advantage over external‑only coolant arrangements. Clear compatibility with VBMT 1103 inserts for flexible setups Designed for VBMT 1103 grade indexable inserts, the SVJB configuration supports common insert geometries used in roughing and finishing. The flat‑style seat suits shops that standardise on this insert shape, simplifying tool inventory and changeovers. Where interchangeability and quick reconditioning of cutting edges matter, this holder supports established insert grades without the need for adapter parts. Practical assembly and workshop ergonomics Fast installation is supported by the supplied Torx screw specification and key: the holder accepts a Torx screw M2.5x6.5 secured with a T8 Torx key, allowing controlled torque and straightforward clamp replacement. The right‑hand cutting orientation and 93° cutting angle suit conventional turning operations, while the proven clamp geometry eases insert seating and reduces the risk of misalignment during re‑assembly. Strongly recommended: choose Teknik Makina’s SVJB Clamping Holder for reliable turning performance and purchase through Metav Werkzeuge for dependable supply and expert consultation — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Product Details Article number: AP549TM Brand: Teknik Makina Description: SVJB for VBMT Indexable Inserts (SVJBR 1616) Facts Clamping width: 16 mm Holder height: 16 mm Cutting head width: 16 mm Cutting height: 35 mm Overall height: 16 mm Overall length: 100 mm Cutting angle: 93° Weight: 0.16 kg Features Innenkuhlung: Internal cooling channel Suitable for: VBMT 1103 Torx screw: M2,5x6,5 (Torx screw specification) Torx key: T8 (Torx key specification) ISO designation: SVJBR 1616 Holder shank reference: H11‑F‑IK Cutting direction: Right FAQ How does the internal cooling affect machining with the Clamping Holder SVJB? The Clamping Holder SVJB for VBMT Indexable Inserts from Teknik Makina uses internal cooling to direct fluid to the cutting zone, which improves chip evacuation and reduces heat at the insert, helping to extend insert life and maintain cutting stability. Which inserts fit this holder? This holder is designed for VBMT 1103 indexable inserts; the SVJB geometry and ISO designation SVJBR 1616 ensure correct seating and repeatable positioning of these inserts in regular turning applications. What torque system is recommended for securing the insert? The holder uses a Torx screw M2.5x6.5 and is tightened with a T8 Torx key, enabling controlled fastening to maintain clamp integrity without over‑stress. Is the Clamping Holder suitable for right‑hand turning only? Yes, the AP549TM configuration is specified for right‑hand cutting; its geometry and 93° cutting angle are optimised for conventional right‑hand turning operations. Can the holder be used in automated tool changers or is it for manual setups? With its standard ISO designation and compact dimensions (SVJBR 1616), the holder integrates into standard tool posts and modular assemblies commonly used in both manual and automated turning centres. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Die Kombination aus Internal Cooling, stabiler 16 × 16 mm Bauform und Passfähigkeit für VCMT 1103 sorgt für konstante Zerspanungsergebnisse und längere Standzeiten. Nutzen Sie die robuste Geometrie und die linksdrehende Schnittauslegung für präzise Innen- und Aussendrehoperationen. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie unsere Fachberatung bei Bedarf an. Clamping Holder SVJCL 1616 (AP538TM) — Indexable Toolholder The Clamping Holder SVJCL 1616 is a left‑hand indexable toolholder for VCMT inserts, designed for precision turning applications where coolant supply and secure clamping are required. Compatible with VCMT 1103 inserts Internal Cooling for improved tool life Compact 16 × 16 mm shank for stable clamping Left‑hand cutting geometry for specialised turning Torx Schraube M2,5x6,5 and Torx Schlüssel T8 for secure fixation Precision clamping with efficient coolant management Engineered for repeatable performance, this toolholder combines a 16 mm shank cross‑section with purpose‑built coolant delivery. The integrated Internal Cooling directs cutting fluid close to the cutting edge, which reduces thermal load and improves chip control. As a result, tool life is extended and machining consistency is increased, especially under demanding conditions. The steady clamping interface also minimises vibration for better surface finish on turned components. Secure fixation and practical handling for production workflows A clear benefit of the design is the reliable clamping mechanism paired with standardised fastenings: the unit is supplied with a Torx Schraube M2,5x6,5 secured using a Torx Schlüssel T8, ensuring repeatable torque and quick insert changes. Installation into compatible tool posts is straightforward thanks to the compact dimensions and defined locating surfaces. This combination reduces downtime during insert changes and supports efficient job sequencing on multi‑machine shop floors. Application focus and compatibility for versatile turning tasks Optimised for use with VCMT 1103 indexable inserts (a common carbide geometry offering a balance of strength and edge stability), the holder performs well in mixed production runs and single‑part prototyping. Its left‑hand cutting orientation makes it suitable for operations that require reverse‑hand turning or dedicated left‑hand tool positions. The 93° cutting angle and 35 mm cutting height support robust cutting engagements while maintaining a predictable cutting force vector. Choose the Teknik Makina SVJCL 1616 for internal‑coolant turning where reliability and quick insert changes matter — order via Metav Werkzeuge or contact our advisors at info@metav-werkzeuge.com for specification support. Product Details Article number: AP538TM Brand: Teknik Makina Type: SVJCL 1616 Description: SVJC for VCMT Indexable Inserts Facts Width: 16 mm Height: 16 mm Cutting head width: 16 mm Cutting height: 35 mm Overall length: 100 mm Overall height: 16 mm Cutting angle: 93° Features Internal Cooling: directs coolant to the cutting zone for improved tool life and chip evacuation Compatible inserts: VCMT 1103 (indexable carbide insert geometry) Torx Schraube: M2,5x6,5 — fastening screw for secure clamping Torx Schlüssel: T8 — recommended tool for screw tightening ISO designation: SVJCL 1616 Shank designation: H11-F-IK Cutting direction: left‑hand cutting for inverse turning tasks FAQ Which inserts fit this holder? The holder is compatible with VCMT 1103 inserts; the Clamping Holder SVJCL 1616 (Teknik Makina, AP538TM) is optimised for that insert geometry to provide a stable seat and consistent cutting performance. Does this toolholder support internal coolant? Yes — the SVJCL 1616 features Internal Cooling that supplies coolant directly to the cutting edge, improving chip evacuation and extending tool life during heavy or interrupted cuts. What fastening hardware is required for mounting the insert? Use the supplied Torx Schraube M2,5x6,5 tightened with a Torx Schlüssel T8 for correct clamping. Correct torque application helps the Teknik Makina Clamping Holder AP538TM maintain repeatable clamp force. Is the tool suitable for left‑hand turning operations? Indeed; the toolholder is specifically produced for left‑hand cutting. The left‑hand geometry and 93° cutting angle make the SVJCL 1616 appropriate for reverse‑hand turning setups or dedicated left‑hand tool posts. Can this holder be used for both roughing and finishing? The robust 16 × 16 mm cross‑section and coolant capability make the holder versatile for both heavier roughing cuts and more delicate finishing operations when paired with the correct VCMT inserts. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Als Kombination aus Innenkühlung, rechter Schnittrichtung und passender Aufnahme für VCMT 1103 Wendeplatten eignet sich dieser Halter für präzise Dreharbeiten mit stabiler Schneidenlage; bestellen über Metav Werkzeuge oder Beratung anfragen für Fertigungseinrichtungen. Klemmhalter — SVJC for VCMT Indexable Inserts Klemmhalter SVJC for VCMT Indexable Inserts ist ein flacher Werkzeughalter für rechtshändiges Drehen, konzipiert zur Aufnahme von VCMT 1103 Wendeplatten und für Einsätze mit Innenkühlung geeignet. Holder SVJCR 1616 for VCMT Inserts Internal coolant-ready for through-tool cooling Right-hand cutting direction, 93° cutting angle Compact 16 mm Width and Height for tight set-ups Shank designation H11-F-IK compatible Built for dependable turning performance Der Klemmhalter wurde für präzise und wiederholbare Dreharbeiten konstruiert. Die Flankenführung hält die VCMT 1103 Wendeplatte sicher, wodurch die Schneidenlage stabil bleibt und einen gleichmässigen Spanfluss ermöglicht. Durch den 93° Schnittwinkel wird eine kraftsparende Kraftübertragung erzielt, was die Schnittkräfte reduziert und die Standzeit der Schneide positiv beeinflusst. Dieses Design eignet sich insbesondere für industrielle Werkstückserien, bei denen konstante Genauigkeit gefragt ist. Designed for coolant-fed machining Die integrierte Innenkühlung erlaubt die Zuführung von Kühlschmierstoff direkt an die Schneide, was bei zerspanenden Prozessen die Wärmeentwicklung senkt und die Spanabfuhr verbessert. In Kombination mit der robusten Klemmung werden Hitzeeinflüsse minimiert, so dass die Schneide ihre Geometrie länger hält. Für Kunden bedeutet dies höhere Prozessstabilität und weniger Nacharbeit bei anspruchsvollen Materialien. Compatibility and straightforward assembly Der Halter ist ausgelegt zur Aufnahme von VCMT 1103 Indexable Inserts (Turning Insert, 1103 Geometry) und trägt die ISO-Bezeichnung SVJCR 1616. Zur Befestigung wird eine Torx Screw M2.5x6.5 verwendet; als Werkzeug empfiehlt sich ein Torx Key T8 für korrektes Anzugsmoment. Die Ausführung mit Shank designation H11-F-IK ermöglicht einfache Integration in vorhandene Bohrstangen-Aufnahmen und reduziert Installationszeit in der Werkstatt. Durability, care and setup benefits Gefertigt für industrielle Beanspruchung bietet der Halter eine kompakte Bauform (16 mm Breite / 16 mm Höhe) und eine Gesamtlänge von 100 mm, die das Einspannen in beengten Spannplätzen erleichtert. Wartungsaufwand reduziert sich durch die zugängliche Befestigungstechnik und die Möglichkeit, Kühlschmierstoff direkt zuzuführen. Ersatzteile wie Torx Screw und Torx Key sind standardisiert, was schnelle Eingriffe und minimale Stillstandzeiten ermöglicht. Starke Empfehlung: Wählen Sie den Klemmhalter von Teknik Makina für präzises, coolant-unterstütztes Rechte-Drehen; Anfragen und Bestellungen über Metav Werkzeuge sind möglich — eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Product features Article number: AP528TM Brand: Teknik Makina Description: Klemmhalter — SVJC for VCMT Indexable Inserts (SVJCR 1616) Facts Width: 16 mm Height: 16 mm Cutting head width: 16 mm Cutting height: 35 mm Overall length: 100 mm Overall height: 16 mm Cutting angle: 93° Particularities Internal coolant: Internal coolant for direct tool cooling Suitable inserts: VCMT 1103 (Turning Insert, 1103 Geometry) Torx Screw: M2.5x6.5 (fastening screw) Torx Key: T8 (recommended tool) Shank designation: H11-F-IK (shank code) ISO designation: SVJCR 1616 (indexable turning holder) Cutting direction: Right FAQ What inserts fit the SVJC holder? The SVJC holder is designed for VCMT 1103 inserts; Teknik Makina’s SVJC for VCMT Indexable Inserts (SKU AP528TM) securely accommodates this insert geometry to ensure stable cutting performance. Is the holder suitable for coolant-fed machining? Yes. The SVJC Klemmhalter features Internal coolant, enabling through-tool cooling that reduces heat at the cutting edge and improves chip evacuation during turning operations. Which screw and key are required for mounting? Mounting uses a Torx Screw M2.5x6.5 and the recommended Torx Key T8; these standardised components simplify assembly and ensure correct clamping of the insert in the SVJCR 1616 holder. Can the holder be used in compact setups? With a Width and Height of 16 mm and an Overall Length of 100 mm, the SVJC holder is optimised for tight working spaces and lateral stability in constrained tool arrangements. What is the cutting direction and angle? The Klemmhalter is configured for Right cutting direction with a 93° cutting angle, delivering a balanced force flow for many turning applications. Is the tool compatible with existing shank systems? The holder’s Shank designation H11-F-IK allows integration with matching bores and adapters; check the machine’s shank interface to confirm direct compatibility with the H11-F-IK specification. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Clamping Holder D103TM (DDNNN 2525 Tool Holder) The Clamping Holder D103TM is a precision Tool Holder for turning operations, optimised for DNMG 1104 Indexable Inserts and designed to deliver secure clamping and consistent Cutting performance. Clamping Holder DDNNN 2525 ISO design Fits DNMG 1104 indexable inserts Cutting Angle 62.5° for predictable chip flow Overall Length 150 mm for extended Reach Includes U Plate TA030 and M4x11 fixing screw Reliable clamping for predictable machining results The Clamping Holder combines a compact 25 mm profile with a robust Clamping interface to keep the Insert steady under load. With a Cutting Angle of 62.5°, the geometry promotes controlled Chip Flow and reduces radial shocks during cuts, which helps maintain Surface Finish and prolong Insert life. The secure Verriegelungsschraube M5 and the matched U Plate TA030 ensure repeatable seating and fast tool changes without compromising accuracy. Practical interface with standard components Engineered for straightforward integration, the holder uses common fixings such as U Plate Screw M4x11 and a clamping Wedge BK024, making it simple to replace or reconfigure in existing tool assemblies. The supplied Allen key set (3 Allen) supports routine mounting and torque checks. This familiar hardware approach reduces setup time and keeps workshop logistics efficient while supporting consistent clamping forces for reliable Turning operations. Designed to support efficient turning cycles At an Overall Length of 150 mm and a Cutting Head Width of 25 mm, this tool offers access to deeper bores and extended profiles without sacrificing rigidity. The moderate Cutting Height of 38 mm balances strength with clearance, helping to prevent chatter in light to medium-duty roughing and finishing passes. For users seeking a predictable machining window, the geometry delivers performance gains through better tool stability and repeatable cutting conditions. Clear compatibility and easy specification The holder is specified as DDNNN 2525 and is suitable for the widely used DNMG 1104 Insert format, making it a practical choice for workshops that rely on standard Indexable Inserts. "Indexable Insert" refers to a replaceable cutting tip that can be rotated or replaced when worn, reducing downtime and tooling cost. The product therefore supports a cost-efficient approach to turning where tool life and quick recovery are priorities. Choose the Teknik Makina DDNNN 2525 Clamping Holder for dependable clamping and consistent Turning results — request further technical details or a personalised quote from Metav Werkzeuge via info@metav-werkzeuge.com Product Details Article number: D103TM Brand: Teknik Makina Designation: DDNNN for DN-- 1506 Indexable Inserts ISO designation: DDNNN 2525 Facts Width: 25 mm Height: 25 mm Cutting head width: 25 mm Cutting height: 38 mm Cutting angle: 62.5° Overall length: 150 mm Total height: 25 mm Features U Plate: TA030 (clamping base) U Plate Screw: M4x11 (fixing Screw) Locking Screw: M5 (Verriegelungsschraube) Clamping Wedge: BK024 (spannpratze) Allen Key: 3 Allen (inbus Schlüssel set) Fits: DNMG 1104 Indexable Inserts Holder ISO: DDNNN 2525 Mounting Shank designation: M11 FAQ What Inserts fit this holder? The Clamping Holder D103TM from Teknik Makina is designed to accept DNMG 1104 Indexable Inserts; the DDNNN 2525 specification ensures correct seating and orientation for these Insert types. Which screws and plates are required for mounting? Mounting uses the U Plate TA030 together with the U Plate Screw M4x11 and the Locking Screw M5; the package is compatible with standard clamping assemblies and can be tightened using the supplied 3 Allen key set. Can this holder reach into deeper grooves or bores? Yes. With an Overall Length of 150 mm and a Cutting Head Width of 25 mm, the D103TM provides extended Reach while maintaining rigidity for stable Turning, suitable for many general workshop applications. How does the Cutting Angle affect machining? The 62.5° Cutting Angle on the D103TM promotes predictable Chip Flow and reduces radial impact on the Insert, which helps to improve Surface Finish and extend Insert life during both roughing and finishing passes. Is the DDNNN 2525 compatible with other standard toolblocks? The ISO designation DDNNN 2525 and the specified Mounting Shank M11 make the holder compatible with common toolblock configurations; confirm dimensions against your lathe tooling to ensure full compatibility. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

CKJNL 2525 Clamp Holder for KNUX Indexable Inserts The CKJNL 2525 Clamp Holder is a left-hand turning toolholder engineered for use with KNUX 1604 indexable inserts, delivering stable clamping and precise external turning in workshop and production environments. Left-hand Cutting Direction Compatible with KNUX 1604 Inserts 25 mm Shank Width and 25 mm Height 30 mm Cutting-Head Width for Stability Clamping Screw M6 for Secure Fixing Reliable Clamping that Reduces Vibration and Rework The Clamp Holder is designed to secure indexable inserts with consistent seating and repeatable clamping force, which reduces chatter and extends Insert Life. With a Clamping Screw M6 and a dedicated Clamping Wedge (BK028), the toolholder delivers a firm hold that improves Surface Finish and dimensional accuracy on external turning operations. The 93° Cutting Angle and Left-Hand Cutting Direction make this holder particularly suitable for left-hand machining applications, where stable force transmission is essential. Fast Setup and Clear Compatibility with Standard Accessories Mounting and adjustment are straightforward thanks to defined connection points and standardised fasteners. The holder accepts a U Plate of type TA046 (Mounting Plate) and uses a U-Plate Screw M3x10 for secure attachment. Adjustment and tightening are performed with an Allen Key (3 Allen), enabling quick tool changes and minimising downtime. Compatibility with the KNUX 1604 Insert Geometry means fewer compromises at tool selection and a simpler tooling kit for the Workshop. Compact Design for Precise Engagement and Reach With a 25 mm Shank Width and 25 mm Shank Height, plus a 30 mm Cutting-Head Width and an Overall Length of 150 mm, the holder balances rigidity and accessibility. The 35 mm Cutting Height provides sufficient engagement for robust turning tasks while keeping the tool profile compact for confined setups. These dimensional choices help maintain Tool Stiffness close to the cutting point, which translates into higher feed rates and more predictable machining results under load. Purpose-Built for Practical Production Use This toolholder has been conceived for practical use in both jobbing shops and industrial settings where reliable, repeatable machining is required. The ISO designation CKJNL 2525 confirms a standardised form factor that integrates with common lathe toolpost systems and holders. By specialising for KNUX 1604 inserts and left-hand operations, the CKJNL 2525 reduces selection uncertainty and supports efficient process planning on the shopfloor. Choose the CKJNL 2525 Clamp Holder from Teknik Makina for assured left-hand turning performance — contact Metav Werkzeuge for availability and delivery: info@metav-werkzeuge.com • +49 2822 7131930 Product Specifications SKU: RD034TM Manufacturer: Teknik Makina Designation: CKJN for KNUX Indexable Inserts (CKJNL 2525) Facts Shank Width: 25 mm Shank Height: 25 mm Cutting-Head Width: 30 mm Overall Length: 150 mm Cutting Height: 35 mm Cutting Angle: 93° Thread Bore (Tool Shank): M16 U-Plate Screw: M3x10 Clamping Screw: M6 Features Compatible Inserts: KNUX 1604 U Plate: TA046 (Mounting Plate) Clamping Wedge: BK028 (Clamping Wedge) Allen Key: 3 Allen (Adjustment Tool) ISO Designation: CKJNL 2525 Cutting Direction: Left-hand FAQ Is the holder compatible with KNUX 1604 inserts? Yes. The CKJN for KNUX Indexable Inserts (ISO CKJNL 2525, SKU RD034TM) is designed specifically for KNUX 1604 insert geometry, ensuring correct seat and secure clamping for consistent cutting performance. What fasteners are required for mounting? Mounting uses a U-Plate Screw M3x10 for the U Plate (TA046) and a Clamping Screw M6 for insert fixation. The design accommodates a standard M16 Thread Bore in the Tool Shank for secure attachment. Which cutting direction is supported? This Clamp Holder is configured for Left-hand Cutting Direction, making it suitable for left-hand turning operations and turning centres that require a left-facing tool orientation. How is the tool adjusted and tightened? Adjustment is performed using an Allen Key set indicated as 3 Allen for the relevant screws and clamps; tightening the M6 Clamping Screw secures the insert reliably in the pocket. Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, Email: info@teknik-makina.com / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; Email: info@metav-werkzeuge.com

Die Kombination aus präziser Klemmtechnik, passgenauer Kompatibilität für KNUX 1604 Wendeschneidplatten und robuster Bauweise sorgt für stabile Zerspanungsbedingungen und einfache Werkzeugwechsel. Nutzen Sie die sichere Verriegelung mit M6-Schraube und die bewährte Auflage TA046 für gleichbleibend reproduzierbare Ergebnisse. Bei Fragen zur Anwendung oder zur Anlagenintegration steht Metav Werkzeuge gern beratend zur Seite. CKJNL 3232 Clamp Holder (CKJN for KNUX Indexable Inserts) The CKJNL 3232 Clamp Holder delivers secure clamping and left-hand turning compatibility for KNUX 1604 indexable inserts, engineered for reliable part finish and fast insert changes. CKJNL 3232 Clamp Holder for KNUX inserts Left-hand cutting direction for specialised turning Secure locking with M6 locking screw Mounting base TA046 included for stable seating Compact dimensions: 170 mm overall length Precision and Compatibility for dependable Turning Der Clamp Holder ist auf die Aufnahme von KNUX 1604 Wendeschneidplatten ausgelegt und bietet dadurch eine direkte, zuverlässige Schnittlösung für linksdrehende Anwendungen. Dank der klar definierten Schnittwinkelgeometrie von 93° ist die Schneidlage stabil, was Vibrationen reduziert und die Oberflächenqualität verbessert. Diese Bauweise ermöglicht rasche Plattenwechsel und minimiert Rüstzeiten bei wiederkehrenden Serienteilen. Robust Design and Secure Clamping for consistent Results Mit einer Gesamt­länge von 170 mm und einer Schneidkopfbreite von 40 mm bietet das Werkzeug eine robuste Auflagefläche, die Bearbeitungskräfte sicher in die Maschine leitet. Die Verriegelungsschraube M6 sorgt für festen Sitz der Platte; die Spannpratze BK028 ergänzt die Klemmfunktion und verhindert ein Nachschlagen unter Last. So bleibt die Position während des Schnitts reproduzierbar stabil. Practical Assembly and Tooling Notes to speed up Setup Die Montage erfolgt auf der Auflage TA046, befestigt mittels der U-Platte-Schraube M3x10, was einen schnellen und sicheren Aufbau gewährleistet. Einfache Handhabung wird durch die Verwendung von 3 Allen keys zur Justage unterstützt. Die genormten Anschlüsse und die Bohrstangenbezeichnung P16 erleichtern die Integration in vorhandene Werkzeugaufnahmen und reduzieren die Anpassungszeiten. Applications and Operational Benefits in daily use Dieses Klemmhalter-Design eignet sich besonders für präzise, linksdrehende Dreharbeiten, bei denen konstante Schnittbedingungen gefordert sind. Die kompakte Bauform und die definierte Schneidenhöhe von 35 mm unterstützen die Produktion von Teilen mit engen Toleranzen. Anwender profitieren von geringerer Stillstandszeit durch schnellen Plattenwechsel und von gleichbleibender Maßhaltigkeit über Serienstücke. Choose the CKJNL 3232 for secure, left-hand turning with proven compatibility to KNUX 1604 inserts — contact Metav Werkzeuge for specification support at info@metav-werkzeuge.com or by phone +49 2822 7131930 Product Features Article number: RD032TM Brand: Teknik Makina Designation: CKJNL 3232 Type: CKJN for KNUX Indexable Inserts Suitable for inserts: KNUX 1604 Clamping wedge: BK028 Clamping plate: TA046 Clamping plate screw: M3x10 (Clamping plate screw) Locking screw: M6 (Locking screw) Facts Width: 32 mm Height: 32 mm Cutting head width: 40 mm Cutting height: 35 mm Overall length: 170 mm Total height: 32 mm Cutting angle: 93° Cutting direction: Left Weight: 1.31 kg Features Shaft designation: P16 Allen keys: 3 (for adjustment) Clamping wedge BK028 (secure clamp element) TA046 mounting base (stable seating) CKJNL 3232 ISO designation (designation for ordering) FAQ What inserts fit this clamp holder? The clamp holder is designed for KNUX 1604 indexable inserts; the CKJNL 3232 Clamp Holder from Teknik Makina accepts these inserts with a stable seating and correct rake alignment for left-hand turning. Is the CKJNL 3232 suitable for left-hand turning only? Yes, the CKJNL 3232 is configured for left-hand cutting direction with a defined 93° cutting angle, optimised for applications requiring left-turn operations. Which components are required for mounting? Mounting uses the TA046 clamping plate and M3x10 screws for secure fixation; the locking is achieved with the M6 locking screw and the BK028 clamping wedge for reliable clamping under load. Can the CKJNL 3232 be integrated into existing tool systems? Integration is straightforward thanks to the P16 shaft designation and standardised mounting features; Metav Werkzeuge can provide additional specification details for machine compatibility. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of Internal Coolant, a precise 93° Cutting Angle and the ISO SVJBL 1010 clamping design delivers reliable chip control and repeatable seating for turning operations with VBMT 1103 inserts; order the Clamp Holder directly via Metav Werkzeuge or request our technical advice if required. Clamp Holder — SVJB for VBMT Indexable Inserts (Teknik Makina) The Clamp Holder (SVJB for VBMT Indexable Inserts) is a left‑hand turning tool designed for secure clamping of VBMT 1103 inserts, offering internal coolant and a robust SVJBL 1010 mounting for consistent performance. SVJBL 1010 clamping design Suitable for VBMT 1103 indexable inserts Internal Coolant for reliable chip control Left‑hand orientation with 93° cutting angle Torx Schraube M2.5x6.5 and Torx Schlüssel T8 for fastening Robust Design for Precise Clamping The Clamp Holder combines a compact SVJBL 1010 clamping geometry with clearly defined dimensions to guarantee repeatable tool positioning. The Clamping Width and Clamping Height are both 10 mm, while the Cutting Head Width is 10 mm, so the Holder sits stably in the toolpost. The Overall Length of 110 mm and a Cutting Height of 30 mm provide the rigidity required for stable cuts, and the 93° Cutting Angle ensures consistent engagement with VBMT 1103 inserts. This results in measurable process stability and reduced setup time. Internal Coolant Enhances Tool Life and Surface Finish An integrated Internal Coolant channel directs coolant to the cutting edge for improved lubrication and chip evacuation. The internal supply reduces heat at the Insert-Cutting-Edge interface, which helps to extend Insert life and to maintain a consistent Surface Finish. For operations producing long continuous chips or requiring coolant-fed lubrication, the coolant feature makes a clear difference in tool performance and component quality. Secure Fastening and Easy Maintenance Fixing is straightforward: the Holder uses a Torx Schraube (M2.5x6.5) secured with a Torx Schlüssel (T8), providing reliable clamping force and quick serviceability. The ISO designation SVJBL 1010 clarifies compatibility with standard toolholders, and the Bar Designation J11-F-IK identifies the matching tool shank. Fastening with the correct Torx key prevents screw damage and ensures the Insert seats correctly, reducing runout and improving repeatability across batches. Intended Use and Practical Guidance for Workshops Engineered for left‑hand turning, the Holder is optimised for VBMT 1103 inserts and typical lathe setups where compact, coolant-fed tooling is required. When fitting the Insert, check seating surfaces for cleanliness and apply the recommended torque to the Torx Schraube to secure the clamping. If you are unsure whether this Clamp Holder suits a specific machining task or need further technical data, our team at Metav is happy to assist — contact details follow in the Technical Information and FAQ sections. Metav’s location in Emmerich acts as a quality filter for the European market, supporting reliable supply. Choose Teknik Makina’s SVJB clamp solution for dependable coolant-fed performance — order via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com for tailored advice Product Features Article number: AP557TM Brand: Teknik Makina Designation: Clamp Holder — SVJB for VBMT Indexable Inserts Data Clamping Width: 10 mm Clamping Height: 10 mm Cutting Head Width: 10 mm Cutting Height: 30 mm Overall Length: 110 mm Overall Height: 10 mm Cutting Angle: 93° Cutting Direction: Left Special Features ISO Designation: SVJBL 1010 (ISO clamp-holder designation) Bar Designation: J11-F-IK Internal Coolant Suitable for VBMT 1103 inserts Torx Schraube: M2.5x6.5 Torx Schlüssel: T8 FAQ What inserts fit this clamp holder? The Clamp Holder (Teknik Makina SVJB for VBMT Indexable Inserts, SKU AP557TM) is specified for VBMT 1103 indexable inserts and secures them via the SVJBL 1010 clamping geometry. Does the holder provide coolant supply to the cutting edge? Yes — the Clamp Holder features Internal Coolant, which feeds coolant directly to the cutting zone for improved chip control and prolonged Insert life. Which fastening parts are used and how are they operated? The holder uses a Torx Schraube (M2.5x6.5) tightened with a Torx Schlüssel (T8) to achieve secure clamping; use the correct Torx key to avoid rounding the screw head. Is this a left‑hand or right‑hand tool? This Clamp Holder is for left‑hand turning applications and has a 93° Cutting Angle, optimised for standard left‑hand machining operations. What should I check during assembly to ensure repeatability? For consistent results, clean seating surfaces, confirm correct seating of the VBMT 1103 Insert, and tighten the Torx Schraube to the recommended torque; this reduces runout and improves repeatability. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Die Kombination aus Innenkühlung, passender Eignung für VBMT 1103 Wendeplatten und einer kompakten 12 mm Klemmfläche sorgt für zuverlässige Spannkraft und dauerhafte Schneidenstabilität. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei Bedarf, um die Einsatzkompatibilität mit Ihrer Maschine zu prüfen. Klemmhalter — SVJB for VBMT Indexable Inserts The Klemmhalter SVJB for VBMT Indexable Inserts secures VBMT 1103 Inserts for left-hand turning operations, offering internal coolant and a robust 12 mm clamping interface for repeatable, shop-floor performance. 12 mm Clamping Width Internal Coolant for Efficient Cooling Compatible with VBMT 1103 Inserts Left-hand Cutting Direction, 93° Cutting Angle Torx Schraube M2,5x6,5 and Torx Schlüssel T8 Compact Design that Keeps Inserts Stable under Load The holder is engineered with a 12 mm Clamping Width and an ISO designation of SVJBL 1212, which provides a solid contact surface for VBMT-style Inserts. This short, rigid design reduces chatter and maintains cutting geometry even during repetitive turning cycles. Thanks to the 93° Cutting Angle and a controlled Schneidenhöhe of 32 mm, the toolholder supports consistent chip formation and predictable cutting forces, promoting longer Insert life and fewer setup adjustments for machine operators. Internal Coolant for Cooler Cutting and Cleaner Chips Equipped with Internal Coolant, this Klemmhalter directs coolant close to the cutting edge, improving heat dissipation and Chip Evacuation in continuous turning tasks. That targeted cooling reduces thermal wear on the Insert and helps preserve the cutting edge, which in turn lowers tooling costs over time. In processes where material build-up or high temperatures can compromise surface finish, Internal Coolant contributes directly to repeatable part quality and fewer reworks. Simple Mounting and Service with Standard Fasteners Assembly and maintenance are straightforward: the clamping element is secured with a Torx Schraube M2,5x6,5 (fastening screw) using a Torx Schlüssel T8 (drive key), making routine insert changes quick and reliable. The holder’s Overall Length of 110 mm and compatibility with shank designation J11-F-IK mean it integrates easily into common tool posts. Clear access to the fixing screw aids safe handling and fast replacement cycles, so downtime is reduced and workshop throughput improves. Designed Specifically for VBMT Inserts in Turning Applications This toolholder has been optimised for VBMT 1103 Inserts and left-hand Cutting Direction work, making it well suited for production and maintenance workshops performing external turning and finish passes. The combination of rigid geometry, targeted cooling and standardised fastening supports precise repeatability across batches. For customers seeking a robust, serviceable clamping solution that pairs with established VBMT Grades, this Klemmhalter delivers a practical balance of performance and ease of use. Secure the Teknik Makina Klemmhalter AP558TM through Metav Werkzeuge for dependable clamping and local technical advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and rapid supply. Product Details Article number: AP558TM Brand: Teknik Makina Designation: SVJB for VBMT Indexable Inserts ISO Designation: SVJBL 1212 Facts Clamping width: 12 mm Height: 12 mm Cutting head width: 12 mm Cutting height: 32 mm Total height: 12 mm Overall length: 110 mm Cutting angle: 93° Weight: 0.11 kg Features Internal coolant: Yes — enhances cooling and chip evacuation Suitable for: VBMT 1103 inserts Cutting direction: Left Torx Schraube: M2,5x6,5 (fastening screw) Torx Schlüssel: T8 (drive key) Shank designation: J11-F-IK FAQ What Inserts fit this holder? The Klemmhalter from Teknik Makina is designed for VBMT 1103 Inserts; the SVJB design secures the insert form and ensures correct cutting geometry for turning operations. Does this toolholder provide coolant to the cutting edge? Yes, the AP558TM Klemmhalter features Internal Coolant to support temperature control and Chip Evacuation, improving Insert life and surface finish. Which fasteners are required for assembly? Assembly uses a Torx Schraube M2,5x6,5 tightened with a Torx Schlüssel T8; this standard fastening simplifies maintenance and keeps changeover times low. Is the holder compatible with standard shanks? The product lists shank designation J11-F-IK and an Overall Length of 110 mm, allowing straightforward integration into common tool posts used in turning setups. What cutting direction is supported? This holder is specified for left-hand cutting direction, which suits left-hand turning applications and related tooling arrangements. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

AP514TM Klemmhalter — SDJC for DCMT Indexable Inserts The AP514TM Klemmhalter is a left‑hand SDJC Toolholder designed for precision turning with DCMT 11T3 Indexable Inserts, combining compact geometry and Internal Cooling for consistent metal removal. SDJCL 1212 format for reliable clamping Compatible with DCMT 11T3 indexable inserts Internal Cooling for stable Chip Evacuation Left‑hand cutting, 93° Cutting Angle Compact head: 16 mm Cutter Width for tight spaces Built for dependable, repeatable machining results The Holder’s SDJCL 1212 geometry delivers a secure Clamp that minimises Insert movement under load, translating into consistent Dimensional Accuracy and surface finish. With a Cutting Angle of 93° and a Cutter Head Width of 16 mm, the tool is optimised for constrained set‑ups where accessibility and rigidity matter. The overall Length of 110 mm provides a balanced reach without excessive overhang, reducing Vibrations and supporting stable cutting conditions. Internal cooling that stabilises cutting performance This Toolholder features Internal Cooling, a routed coolant channel that directs fluid close to the cutting edge to improve Chip Evacuation and thermal control. The cooling path reduces edge wear and helps maintain cutting parameters for longer tool life, especially under continuous or demanding cycles. Fixing is achieved via a Torx Screw (M3,5x11) tightened with the Torx Key T15, offering reproducible clamp force and simple serviceability. Fast set‑up and broad compatibility with DCMT inserts Fitting is straightforward: the AP514TM accepts DCMT 11T3 style Indexable Inserts and uses U Plate TA030 with U Plate Screw M5 for secure mounting. The Holder’s designation (SDJCL 1212) corresponds to a 12 × 12 Shank Profile and a Cutting Height of 32 mm, enabling quick interchange on appropriate toolposts. The included Bohrstange designation J11‑IC matches common shank interfaces, so integration into existing tool inventories is efficient and predictable. Practical advantages for workshops and specialised operations Choose this Holder when process reliability and ease of maintenance are priorities. The combination of rigid Clamp geometry, targeted Internal Cooling and standardised fasteners reduces downtime for Insert changes and coolant maintenance. The left‑hand orientation suits applications where reverse cutting direction is required. Backed by Teknik Makina engineering, the AP514TM gives a straightforward route to improved cycle times and more consistent part quality. For reliable left‑hand SDJC performance choose the Teknik Makina AP514TM Klemmhalter — contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Product Features Article number: AP514TM Manufacturer: Teknik Makina Designation: SDJC for DCMT Indexable Inserts ISO designation: SDJCL 1212 Facts Holder Width: 12 mm Holder Height: 12 mm Cutter Head Width: 16 mm Cutting Height: 32 mm Overall Height: 12 mm Overall Length: 110 mm Cutting Angle: 93° Weight: 0.11 kg Features Internal Cooling: coolant channel to the cutting zone Compatible Inserts: DCMT 11T3 (Indexable Insert format) U Plate: TA030 U Plate Screw: M5 Torx Screw: M3,5x11 Torx Key: T15 Shank / Bar: J11-IC FAQ What Inserts fit this Holder? The AP514TM Klemmhalter is designed for DCMT 11T3 Indexable Inserts; Teknik Makina’s SDJC geometry secures the Insert reliably for turning tasks. Does the Holder support coolant through the shank? Yes — the AP514TM features Internal Cooling, which channels coolant to the cutting edge to aid Chip Evacuation and thermal stability during longer cycles. Which fasteners are used to secure the Insert? Insert clamping is achieved with a Torx Screw (M3,5x11) tightened using a T15 Torx Key; this configuration ensures reproducible clamping torque for the AP514TM Klemmhalter. Is the Holder suitable for left‑hand operations? The AP514TM is a left‑hand SDJC Toolholder with a left‑oriented Cutting Direction and a 93° Cutting Angle, making it suitable where reverse turning is required. Can this Holder be mounted on standard turning bars? The Holder references the Bohrstange designation J11‑IC and uses U Plate TA030, streamlining integration with compatible tool posts and turning bars. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Die Kombination aus präziser Kompatibilität für DCMT 0702 und der robusten Linkslauf-Schneidgeometrie sorgt für zuverlässige Dreharbeiten mit konstanter Lagetreue. Nutzen Sie die kompakte Kopfbreite und die standardmässige Torx-Befestigung, um Rüstzeiten zu minimieren. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie unsere fachliche Beratung bei Bedarf an. Klemmhalter — SDJC for DCMT Indexable Inserts (Clamp Holder) Der Klemmhalter Klemmhalter ist ein linksgerichteter Clamp Holder, ausgelegt für Drehbearbeitung mit DCMT 0702 Wendeplatten und hoher Laufruhe Clamp Holder SDJCL 1212 (D360-1TM) by Teknik Makina Designed for DCMT 0702 indexable inserts Left-hand Cutting Direction, 93° Cutting Angle Compact Head: 16 mm Cutting Width, 15 mm Cut Height Includes Torx Screw M2.5x5.5 and Torx Key T8 Precision and Compatibility that Reduce Setup Time This Clamp Holder is engineered to accept DCMT 0702 indexable inserts and carries the ISO designation SDJCL 1212, which simplifies insert selection and reduces setup uncertainty. The left-hand Cutting Direction and a Cutting Angle of 93° give a predictable cutting kinematic, enabling consistent chip flow and surface finish. Because the Torx Screw specification (M2.5x5.5) and Torx Key T8 are standardised, clamp changes and insert replacement are fast and reliable, lowering machine downtime and improving throughput. Compact Design for Stable, Repeatable Turning With a Cutting Head Width of 16 mm, a Cut Height of 15 mm and an overall Length of 125 mm, the Clamp Holder balances reach and rigidity. The 12 mm Holder Width and 12 mm Holder Height contribute to a firm clamping interface that resists vibration during interrupted cuts. This compact Profile supports higher feed rates while maintaining dimensional accuracy, so operators benefit from both stable machining and improved Cycle Times on a wide range of turning tasks. Workshop-Proven Features for Practical Use Practical details such as the Torx Screw M2.5x5.5 and included Torx Key T8 translate directly into less maintenance fuss on the shop floor. The Clamp Holder’s compatibility with DCMT inserts permits flexible selection of grades and coatings to suit steel, stainless steel or cast iron operations. The left-hand configuration and 93° geometry make this tool particularly suitable where toolpath direction or clamping orientation requires a left-handed tool—offering a clear operational advantage in many setups. Metav as a Reliable Partner for Purchase and Advice Metav Werkzeuge brings decades of supply experience and acts as a quality filter for the European market. With a broad product range and a dependable logistics base in Emmerich, customers benefit from consolidated procurement and trusted product information. If further technical data or a bespoke machining recommendation is required, Metav’s team is available to advise on suitable insert grades and cutting parameters to match specific materials and cycle objectives. Choose the Teknik Makina Clamp Holder SDJCL 1212 via Metav Werkzeuge to secure reliable DCMT 0702 compatibility and reduced setup time — contact Metav Werkzeuge for delivery and technical guidance from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Product Details Article number: D360-1TM Brand: Teknik Makina Series: SDJC for DCMT Indexable Inserts / SDJCL 1212 Facts Holder Width: 12 mm Holder Height: 12 mm Cutting Head Width: 16 mm Cut Height: 15 mm Overall Length: 125 mm Cutting Angle: 93° Weight: 0.13 kg Features Suitable for: DCMT 0702 inserts Torx Screw: M2.5x5.5 Torx Key: T8 ISO Designation: SDJCL 1212 Shank Designation: K07 Cutting Direction: Left FAQ Which inserts fit this Clamp Holder? The Clamp Holder is designed for DCMT 0702 indexable inserts; matching the SDJCL 1212 geometry ensures correct seating and secure clamping for repeatable turning results. Is the D360-1TM suitable for left-hand toolpaths? Yes, the D360-1TM Clamp Holder is left-hand configured and features a 93° Cutting Angle, making it appropriate for left-hand turning applications and particular clamping orientations. What fastening hardware is required for insert clamping? The Clamp Holder uses a Torx Screw M2.5x5.5 and the supplied Torx Key T8 for secure and quick insert changes, as specified for Teknik Makina SDJCL 1212 holders. How does the compact head benefit machining? The 16 mm Cutting Head Width and 15 mm Cut Height provide a rigid contact area that reduces vibration, enabling higher feed rates and improved surface finish on interrupted or continuous cuts. Can Metav provide additional cutting data for this holder? Metav Werkzeuge can advise on cutting speeds, feeds and suitable insert grades for the Teknik Makina Clamp Holder SDJCL 1212 (SKU D360-1TM) to match your material and machining goals. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Die Kombination aus Linksschneidung, kompakter Breite 12 mm und der Gesamtlänge 110 mm sorgt für stabile, reproduzierbare Schnitte bei Serienbearbeitung; nutzen Sie die Wirtschaftlichkeit und Verlässlichkeit dieses Klemmhalters direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. SDJCL 1212 SDJC Toolholder for DCMT Indexable Inserts Der SDJCL 1212 SDJC Toolholder bietet eine stabile Linksschneidung für Drehbearbeitungen mit DCMT Einsätzen und eignet sich für präzise, wiederholbare Schnitte in Serienfertigung. Compatible with DCMT 11T3 inserts Compact 12 mm Width and 12 mm Height Left-hand Cutting orientation for specific turning operations Robust Torx fixing with T15 key Overall Length 110 mm for extended reach Höhere Prozessstabilität durch präzise Klemmung Der Toolholder wurde für wiederholbare Spannvorgänge entwickelt und bietet dank der Klemmfunktion hohe Stabilität bei Schnittkräften. Die Kombination aus 12 mm Breite und 12 mm Höhe reduziert Schwingungen und ermöglicht saubere Spanabfuhr, wodurch die Oberflächenqualität verbessert wird. Anwender profitieren von konstanter Bearbeitungsleistung bei mittleren bis grossen Losgrößen. Kompatibilität und Montagefreundlichkeit für den Werkstattalltag Dieser Halter ist ausgelegt für DCMT 11T3 Wendeplatten und wird mit einer U-Platte TA030 sowie einer M5 U-Platten-Schraube montiert. Die Torx-Schraube (M3,5x8,5) und der mitgelistete T15 Torx-Schlüssel sorgen für schnelle und sichere Wechselvorgänge, wodurch Rüstzeiten minimiert und die Maschinenlaufzeit erhöht werden. Technische Präzision für sichere Schneidgeometrie Mit einem Schnittwinkel von 93° und einer Schneidenhöhe von 20 mm unterstützt der Halter exakte Spanführung und definiertes Eingriffsverhalten. Die Linksschneidung ist speziell für Anwendungen konzipiert, die eine bestimmte Vorschubrichtung erfordern, und trägt so zu reproduzierbaren Ergebnissen bei komplexen Schnitten bei. Zielgruppe und Einsatzbereiche Dieser Toolholder richtet sich an Drehereien, Feinmechaniker und den produzierenden Metallbau, die hohe Stabilität bei Indexplatten-Einsätzen erwarten. Er eignet sich besonders für Anwender, die standardisierte Inserts verwenden und schnellen Wechsel sowie geringe Schwingungsneigung benötigen. Empfehlung: Entscheiden Sie sich für den SDJCL 1212 von Teknik Makina als zuverlässige Ergänzung Ihrer Fertigungswerkzeuge und bestellen Sie direkt bei Metav Werkzeuge in Emmerich für sicheren Versand und kompetente Beratung. Kontakt: info@metav-werkzeuge.com / +49 2822 7131930 Product Features Artikelnummer: D156TM Marke: Teknik Makina Bezeichnung: Klemmhalter SDJC for DCMT Indexable Inserts Facts Gesamtlänge: 110 mm Klemmhalter Breite: 12 mm Klemmhalter Höhe: 12 mm Schneidenkopf Breite: 12 mm Schneidenhöhe: 20 mm Gewicht: 0.13 kg Schnittwinkel: 93° Schnittrichtung: left Besonderheiten Fur Wendeplatten: DCMT 11T3 (Indexable Carbide Insert Type) Klemmhalter Bezeichnung ISO: SDJCL 1212 U Platte: TA030 U Platte Schraube: M5 Torx Schraube: M3,5x8,5 — Torx Fixing for Quick Insert Clamping Torx Schlüssel: T15 — Required Tool for Screw Tightening FAQ Ist der SDJCL 1212 mit DCMT 11T3 Einsätzen kompatibel? Ja, der SDJCL 1212 SDJC Toolholder von Teknik Makina ist ausgelegt für DCMT 11T3 Einsätze und bietet die passende Aufnahme sowie die erforderliche Klemmung für sicheren Halt. Welche Schrauben und Werkzeuge werden für die Montage benötigt? Für die Montage werden die M5 U-Platten-Schraube und die Torx-Schraube M3,5x8,5 verwendet; zum Festziehen ist ein T15 Torx-Schlüssel geeignet. Eignet sich der Halter für Linksschneidung? Der Halter ist für Linksschneidung konzipiert; die Schnittrichtung ist als left angegeben, was ihn für entsprechende Drehanwendungen prädestiniert. Welche Abmessungen sind besonders relevant für den Einsatz in meiner Drehmaschine? Wesentliche Werte sind die Breite 12 mm, Höhe 12 mm, Schneidenhöhe 20 mm und die Gesamtlänge 110 mm; diese Angaben helfen bei der Auswahl passender Werkzeugaufnahmen.

Die Kombination aus Robustheit, präziser Spannung und einfacher Montage sorgt für konstante Zerspanungsergebnisse; die Kompatibilität mit DCMT 0702 Wendeplatten und die einfache Befestigung über eine Torx Schraube (M2.5x5.5) gewährleisten schnellen Wechsel und hohen Bedienkomfort. Bestellen Sie den Halter direkt über Metav Werkzeuge oder fragen Sie unsere technische Beratung bei Bedarf an. Klemmhalter SDJC for DCMT Indexable Inserts (SDJCL 1616) von Teknik Makina Der SDJCL 1616 Klemmhalter ist ein linksorientierter Drehhalter für DCMT 0702 Wendeplatten, konzipiert für stabile Spannverhältnisse und wiederholbare Schnittergebnisse. Teknik Makina SDJCL 1616 clamping holder Compatible with DCMT 0702 indexable inserts Left-hand cutting, 93° cutting angle 16 mm holder dimensions for stable support Secured with Torx screw M2.5x5.5 and T8 key Maximum stability for repeatable turning quality Der SDJCL 1616 verbindet kompakte Abmessungen mit hoher Steifigkeit: die Halterbreite von 16 mm und die Schneidenbreite von 16 mm schaffen eine feste Auflage, die Schwingungen reduziert und so die Oberflächenqualität stabilisiert. Durch die robuste Geometrie des Halters werden Form- und Lageabweichungen bei Serienbearbeitungen minimiert, was zu reproduzierbaren Ergebnissen führt. Diese Stabilität macht den Halter besonders geeignet für Prozesse, in denen konstante Maßhaltigkeit gefordert ist. Optimised for DCMT 0702 inserts and left-hand operations Der Halter ist ausgelegt für DCMT 0702 Indexable Inserts und unterstützt eine linke Schnittrichtung, wodurch er sich nahtlos in bestehende Werkzeugaufnahmen für linksdrehende Bearbeitungen einfügt. Der definierte Schnittwinkel von 93° und die Schneidenhöhe von 18 mm sorgen für eine stabile Spanbildung bei üblichen Drehparametern. Für Anwender bedeutet das eine klare Einordnung des Werkzeugs in den Fertigungsprozess und eine einfache Kombination mit gängigen Wendeplattentypen. Quick, secure fixing and straightforward handling Die Befestigung erfolgt über eine feststehende Torx screw M2.5x5.5, die mit dem Torx key T8 sicher angezogen wird; das ermöglicht schnelle Wechsel der Wendeplatte und gleichbleibende Klemmkräfte. Die Ausführung mit der Bohrstangenbezeichnung H07-F und der ISO-Bezeichnung SDJCL 1616 erleichtert die Identifikation und Ersatzteilbestellung. Insgesamt reduziert die praxisgerechte Schraubverbindung Rüstzeiten und verbessert die Verfügbarkeit der Maschine. Built for workshop reliability and production use Mit einer Gesamtlänge von 100 mm bietet dieser Klemmhalter eine ausgewogene Kombination aus Reichweite und Steifigkeit, die ihn sowohl für Handwerksbetriebe als auch für industrielle Fertigungslinien interessant macht. Metav Werkzeuge stellt dabei die Versorgungssicherheit sicher und liefert schnell direkt an die Werkbank. Wer konsistente Bearbeitungsergebnisse bei verschiedensten Werkstückmaterialien anstrebt, profitiert von der klaren Zuordnung des Halters zu bewährten Wendeplattengrößen. Strong recommendation: For reliable clamping and efficient insert changes, select the Teknik Makina SDJCL 1616 from Metav Werkzeuge; for technical queries please contact info@metav-werkzeuge.com or call +49 2822 7131930 Product Features Article number: D155TM Brand: Teknik Makina Designation: Klemmhalter SDJC for DCMT Indexable Inserts, ISO SDJCL 1616 Facts Overall length: 100 mm Holder width: 16 mm Holder height: 16 mm Cutting head width: 16 mm Cutting height: 18 mm Cutting angle: 93° Weight: 0.15 kg Features Compatible inserts: DCMT 0702 (indexable insert) Cutting direction: Left Torx screw: M2.5x5.5 Torx key: T8 Shank designation: H07-F FAQ What inserts fit the SDJCL 1616 clamping holder? The SDJCL 1616 clamping holder from Teknik Makina is compatible with DCMT 0702 indexable inserts; this makes it suitable for standard DCMT turning insert formats used in many workshop applications. Is the holder suitable for left-hand cutting only? Yes, the SDJCL 1616 is specified for left-hand cutting direction and a 93° cutting angle, which should be taken into account when planning tool layouts and machining sequences. Which fastener is used to secure the insert? The clamping is carried out with a Torx screw M2.5x5.5, tightened using a Torx key T8, ensuring reliable and repeatable clamping for the Teknik Makina SDJCL 1616. How does the SDJCL 1616 aid in reducing set-up times? With its standardised ISO designation and the use of a single Torx screw, the Teknik Makina SDJCL 1616 allows quick insert changes and straightforward identification of spare parts, shortening machine downtime. Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Order recommendation: Combine reliable Clamping, precise Fit and Internal Cooling to secure consistent turning results with the SDJCL 1616 design; Ideal for use with DCMT 0702 inserts and secured with the specified Torx Schraube for safe operation. Order the Klemmhalter directly via Metav Werkzeuge or request technical advice from our specialists if required. Klemmhalter — SDJC for DCMT Indexable Inserts The Klemmhalter SDJC toolholder provides left-hand turning capability with Internal Cooling, engineered for precise metal removal using DCMT 0702 indexable inserts. SDJC Holder for DCMT Inserts Internal Cooling for reliable chip evacuation Left-hand orientation for reverse turning Secured with Torx Schraube M2,5x5,5 Precision and secure clamping for consistent Turning The SDJCL 1616-style toolholder is built for repeatable clamping and dimensional Stability when machining. Thanks to the rigid clamping geometry and the ISO designation SDJCL 1616, the holder keeps the Insert firmly positioned, reducing vibration and improving Surface Finish. This results in more predictable tool life and fewer interruptions during batch production. Improved performance through Inner Cooling An integrated Internal Cooling channel directs coolant close to the cutting edge, enhancing chip control and heat dissipation. For operations with DCMT 0702 Inserts this reduces thermal load on the cutting Edge and helps maintain cutting geometry, which can extend Insert Life and support higher stable cutting speeds while preserving Workpiece Quality. Compatibility that simplifies set-up and use Designed specifically for DCMT 0702 indexable inserts, the SDJC configuration makes Insert changes straightforward and repeatable. The holder’s left-hand Cutting Direction and the specified Torx Schraube M2,5x5,5 used with the Torx Schlüssel T8 ensure secure fastening; clear specifications reduce set-up time and help standardise tooling across the workshop. Robust dimensions for dependable machining results With a Cutting Height of 27 mm and a Cutting Angle of 93°, this holder provides the Clearance and geometry required for a variety of turning tasks. The compact Head Width and overall Length deliver good access in constrained set-ups while maintaining the necessary rigidity for finishing passes and semi-finish operations. Secure the SDJCL 1616 Klemmhalter with Internal Cooling from Teknik Makina — contact Metav Werkzeuge in Emmerich for tailored advice and to confirm suitability for your machining tasks via info@metav-werkzeuge.com or +49 2822 7131930 Product Details Klemmhalter: SDJC for DCMT Indexable Inserts Article number: AP566TM Brand: Teknik Makina ISO Designation: SDJCL 1616 Facts Holder Width: 16 mm Holder Height: 16 mm Cutting Head Width: 20 mm Cutting Height: 27 mm Cutting Angle: 93° Total Length: 100 mm Weight: 0.21 kg Features Innenkühlung: Internal Cooling channel for directed coolant flow Suitable Inserts: DCMT 0702 Schnittrichtung: Left-hand cutting direction Torx Schraube: M2,5x5,5 Torx Schlüssel: T8 Holder designation: SDJCL 1616 Compatible tool shank: H07-IC FAQ What Inserts fit this SDJC holder? The SDJCL 1616 Klemmhalter is designed for DCMT 0702 indexable inserts; this compatibility ensures correct seat geometry and repeatable clamping when using DCMT inserts in left-hand turning operations. Does the holder provide coolant to the cutting edge? Yes, the SDJCL 1616 design includes Internal Cooling, which channels coolant close to the Insert to improve chip evacuation and reduce heat at the cutting zone. Which fastening hardware is required? The holder is secured with the specified Torx Schraube M2,5x5,5 and is tightened using a Torx Schlüssel T8, giving reliable clamp force for machining. Is this holder suitable for left-hand turning only? The toolholder is configured for a left-hand Cutting Direction; for right-hand operations, select a correspondingly oriented holder. What are the key dimensions to check when replacing a holder? Important dimensions include Holder Width 16 mm, Cutting Height 27 mm and Total Length 100 mm; these ensure correct alignment and reach for your lathe setup. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Clamping Holder D361-1TM — SDJC for DCMT Indexable Inserts A Clamping Holder designed for left-handed turning, compatible with DCMT 0702 Indexable Inserts and optimised for robust, repeatable clamping in workshop environments. Clamping Holder D361-1TM for DCMT inserts Left-handed Cut for turning operations Stable Cutting Head Width 25 mm for rigidity Compact 20 x 20 mm Shank for standard toolposts Torx Schraube M2.5x5.5 with Torx Schlüssel T8 for secure fixing Precision and Compatibility for Reliable Turning The SDJC for DCMT Indexable Inserts is built to deliver consistent seating and predictable tool behaviour. Its geometry—featuring a 93° cutting angle and a left-handed cutting direction—helps to maintain tool stability in interrupted cuts and in varying material batches. Compatibility with DCMT 0702 inserts ensures easy stocking and fast changeovers, reducing downtime by enabling shop-standard inserts to be used without adapter work. The SDJCL 2020 designation reflects industry-standard shank dimensions for straightforward integration into existing tool systems. Durable Design and Secure Fixing that Speeds Setup Manufactured with attention to clamping detail, the holder offers a Cutting Head Width of 25 mm and a Shank Size of 20 x 20 mm, giving a balance of access and rigidity at the tool face. The clamping mechanism is tightened with a Torx Schraube: M2.5x5.5, operated using the Torx Schlüssel: T8, which provides positive torque transmission and repeatable clamp preload. These features result in fewer lost operations from tool movement and quicker, safer insert changes—practical benefits that translate into measurable time savings on batch runs and prototype work. Practical Benefits for Daily Workshop Use With an Overall Length of 125 mm and a Cutting Height of 20 mm, the holder offers practical reach and clearance for a wide range of turning tasks. The compact dimensions make it suitable for standard turret and toolpost setups while the left-hand orientation supports specific machining strategies where chip flow or part handling favours that direction. Technically minded operators will appreciate the clear specification of dimensions and the simple, robust fixing that reduces the need for ad hoc shimming or repeated adjustments. Reliability, Supply and Aftercare that Matter Sourcing this holder through Metav Werkzeuge aligns technical quality with dependable supply. Metav’s approach positions a European quality filter at the logistics heart in Emmerich, combining wide product availability with procurement clarity. For shops seeking consistent performance and reliable replenishment, the combination of Teknik Makina engineering and Metav’s distribution network means fewer interruptions and predictable lead times. If additional setup guidance or matching insert recommendations are needed, Metav’s technical advisors are available to assist. For workshop-grade precision choose Teknik Makina’s SDJC Clamping Holder—available via Metav Werkzeuge; for procurement or technical enquiries, contact info@metav-werkzeuge.com or call +49 2822 7131930 Product Features Artikelnummer: D361-1TM Marke: Teknik Makina Bezeichnung: SDJC for DCMT Indexable Inserts ISO Bezeichnung: SDJCL 2020 Facts Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Overall Length: 125 mm Overall Height: 20 mm Cutting Height: 20 mm Cutting Angle: 93° Features Geeignet für Wendeplatten: DCMT 0702 Torx Schraube: M2.5x5.5 (secure clamping) Torx Schlüssel: T8 (tool for assembly) Schneidrichtung: left Klemmhalter Bezeichnung ISO: SDJCL 2020 Klemmhalter Bohrstangen Bezeichnung: K07 FAQ What inserts fit this clamping holder? The Clamping Holder D361-1TM is compatible with DCMT 0702 indexable inserts; Teknik Makina specified this fit to ensure immediate interchangeability with widely used turning grades. Which fastener is used to secure the insert? Assembly and insert retention rely on a Torx Schraube M2.5x5.5, tightened with a Torx Schlüssel T8, giving secure, repeatable clamp force for the D361-1TM. Is the holder suitable for left-handed operations? Yes, the holder is designed for a left-handed cutting direction, making it suitable where chip flow or part geometry requires that orientation; the SDJC geometry supports stable engagement in such cuts. Can I use this holder in standard toolposts? The 20 x 20 mm shank dimensions and the SDJCL 2020 designation allow the holder to integrate with common toolposts and turrets without special adapters. Who supplies and supports the D361-1TM? The D361-1TM Clamping Holder is offered by Teknik Makina and distributed via Metav Werkzeuge; for purchasing or technical advice contact info@metav-werkzeuge.com or +49 2822 7131930. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Clamping Holder SDJCR 1212 (SDJC for DCMT Indexable Inserts) Clamping Holder SDJCR 1212 – a right‑hand turning holder engineered for secure seating of DCMT 0702 indexable inserts in compact tooling setups. 12 mm Shank Width for compact setups 16 mm Cutting Head Width for stable clamp Compatible with DCMT 0702 Inserts Right‑hand Cutting Direction, 93° Angle Torx Screw M2.5x5.5, Torx Key T8 required Durable Design for Reliable Clamping The SDJCR 1212 Clamping Holder combines precise dimensions with a concise Overall Length of 125 mm, providing a compact footprint without compromising stability. With a 12 mm Shank Width and a 16 mm Cutting Head Width the Holder ensures a firm seat for DCMT 0702 Indexable Inserts, reducing vibration and supporting consistent Cutting Results. This stable interface translates into longer Insert Life and fewer tool changes, so machining cycles remain economical and predictable. Precision Geometry that Supports Consistent Cuts Designed for Right‑hand operations, the Holder features a 93° Cutting Angle and a Cutting Height of 15 mm, values that help control chip flow and maintain surface finish during turning. The SDJC Style Clamp secures the Insert against axial and radial forces, which improves repeatability across successive parts. For users unfamiliar with Insert Codes: DCMT denotes a rhombic‑shaped Indexable Insert with a 7° clearance angle, commonly used for general turning tasks that demand a balance of edge strength and accessibility. Practical Assembly and Workshop Efficiency Assembly is straightforward: the Clamp is fixed with a Torx Screw M2.5x5.5, operated with a Torx Key T8, enabling quick Insert changes and accurate torque application. The Holder’s Tool Shank designation K07 suits compact toolposts and small lathes where space is limited. A clear mechanical connection and standard Fastening Hardware reduce setup time, which supports higher machine utilisation and predictable production planning in busy workshops. Compatibility That Keeps Inventory Simple Marked as SDJCR 1212 in ISO notation, this Holder is purpose‑matched to DCMT 0702 Inserts, offering an immediate replacement solution where that Insert form factor is already in use. The combination of compact geometry and standard Fixing Hardware makes the product a practical addition for manufacturers focussed on turning operations requiring reliable, repeatable performance. Metav’s supply network ensures delivery from Emmerich with the benefit of a European quality filter and a broad selection of complementary tooling. Select the Teknik Makina Clamping Holder SDJCR 1212 for dependable turning performance and contact Metav Werkzeuge for fast, expert supply via info@metav-werkzeuge.com Product Details Article number: D220-1TM Brand: Teknik Makina Designation: Clamping Holder — SDJC for DCMT Indexable Inserts Facts Shank width: 12 mm Holder height: 12 mm Cutting head width: 16 mm Cutting height: 15 mm Cutting angle: 93 ° Overall length: 125 mm Overall height: 12 mm Weight: 0.13 kg Features Cutting direction: Right Compatible inserts: DCMT 0702 (Indexable Insert geometry) ISO designation: SDJCR 1212 (ISO Holder Code) Tool shank designation: K07 Torx Screw: M2.5x5.5 (fastening screw) Torx Key: T8 (Torx Key is required for assembly) FAQ What Insert type fits this holder? The Clamping Holder SDJCR 1212 from Teknik Makina is designed to accept DCMT 0702 Indexable Inserts; the Holder geometry and Clamp width ensure secure seating of this Insert form. Is the holder suitable for left‑hand turning? This particular SDJC Holder is specified for right‑hand Cutting Direction; for left‑hand operations select a correspondingly oriented Holder or check Metav’s assortment for alternative configurations. Which tool shank does the holder accept? The Holder is matched to a Tool Shank designation K07, making it suitable for compact mounts commonly used in small lathes and tight‑space setups. How is the insert secured in the holder? Securement is achieved with a Torx Screw M2.5x5.5, tightened using a Torx Key T8, providing a reliable clamp force and simple Insert changes with standard workshop tools. Does the holder offer stable performance for production runs? Yes; the combination of a 16 mm Cutting Head Width, solid Clamp geometry and a 93° Cutting Angle contributes to improved stability and repeatable part quality across batch production. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Klemmhalter SDJC for DCMT Indexable Inserts Klemmhalter SDJC for DCMT Indexable Inserts offers a compact, right-hand clamping solution for turning applications, designed to accept DCMT 0702 inserts and to work with internal coolant for improved chip evacuation Compact SDJCR 1212 format for small setups Compatible with DCMT 0702 indexable inserts Internal coolant for reliable chip control Right-hand cutting direction, 93° cutting angle Securable with Torx Screw M2.5x5.5 and Torx Key T8 This clamping holder brings together precision, secure fixation and coolant delivery. With a 12 mm clamping width and 27 mm cutting height, it is engineered for repeatable turning cycles where stable insert positioning and effective cooling matter. Order the tool via Metav Werkzeuge or request personalised advice from our team to ensure the holder matches your machining routine. Robust Design that Keeps the Insert Stable The clamping system is engineered around a solid SDJCR 1212 format that secures DCMT inserts with high repeatability. The clamp geometry and the dedicated fixing screw (Torx Screw M2.5x5.5) ensure the insert seats firmly, reducing micro-movement during cuts and helping to maintain surface finish. The holder’s compact head, with a cutting-head width of 16 mm, supports close-tolerance turning where a small footprint and dependable clamping contribute to longer tool life and consistent results. Cooling Integration for Cleaner Chips and Longer Tool Life An internal coolant channel is built into the shank so coolant is guided directly to the cutting edge; this internal coolant improves chip evacuation and reduces heat at the cutting zone. For operations using partly interrupted or difficult-to-manage materials, the targeted coolant flow helps to avoid built-up edge and supports process stability. The holder’s right-hand configuration and a 93° cutting angle complement conventional turning cycles, where controlled cooling and chip flow translate into fewer unplanned stops. Practical Fitment and Maintenance on the Shopfloor The holder is supplied in a familiar clamping format and suits standard indexable inserts of the DCMT 0702 designation, making changeovers straightforward. The fixing element is a Torx Screw (M2.5x5.5) tightened with Torx Key T8, offering quick, repeatable assembly without specialised tooling. For users pairing the holder with the K07-IC shank bar, alignment and mounting are intuitive, reducing setup time and helping teams keep machines productive. Where This Holder Works Best This SDJC clamping solution is aimed at precision turning tasks that demand compact tool geometry, reliable insert seating and internal coolant delivery. It performs well in small to medium batch production where repeatability and coolant-assisted machining reduce cycle variation. The combination of secure clamping and coolant routing is particularly beneficial in materials that generate long chips or when higher cutting speeds are used. Choose the SDJCR 1212 clamping holder for dependable right-hand turning with integrated internal coolant — purchase through Metav Werkzeuge for secure supply from Emmerich and expert technical advice via info@metav-werkzeuge.com Product Features Product Features Article number: AP560TM Brand: Teknik Makina Designation: Klemmhalter SDJC for DCMT Indexable Inserts (SDJCR 1212) Data Clamping width: 12 mm Clamping height: 12 mm Cutting-head width: 16 mm Cutting height: 27 mm Overall length: 125 mm Overall height: 12 mm Cutting angle: 93° Weight: 0.17 kg Special Features SDJCR 1212 (ISO designation) Compatible inserts: DCMT 0702 (indexable insert designation) Shank bar designation: K07-IC Internal coolant (internal coolant channel for directed coolant delivery) Cutting direction: Right (right-hand cutting) Torx Screw: M2.5x5.5 (fixing screw) Torx Key: T8 (driving tool) FAQ What inserts fit this clamping holder? The clamping holder accepts DCMT 0702 indexable inserts; the SDJCR 1212 geometry is matched to that insert format to ensure secure seating and correct rake and clearance for typical turning operations. Does the holder provide coolant delivery? Yes, this holder features internal coolant, supplying fluid directly towards the cutting edge to aid chip evacuation and to reduce heat accumulation at the insert. Which screw and key are required for assembly? Assembly uses a Torx Screw M2.5x5.5 and is driven with a Torx Key T8, allowing quick and repeatable tightening without special adapters. Is the clamping direction suitable for conventional turning cycles? The holder is designed for right-hand cutting and a 93° cutting angle, making it suitable for standard right-hand turning applications on lathes and CNC turning centres. What is the ISO designation of the holder? The holder’s ISO designation is SDJCR 1212, indicating the standard clamping format and helping with quick cross-referencing during tool selection. Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Profit from precise clamping, integrated internal coolant and proven compatibility with DCMT 0702 inserts for consistent turning results — order the Clamp Holder directly via Metav Werkzeuge or request technical advice from our specialists. Clamp Holder — SDJC for DCMT Indexable Inserts The Clamp Holder SDJC for DCMT Indexable Inserts is a flat, coolant‑ready clamping solution designed for right‑hand turning and finishing operations with DCMT 0702 inserts. SDJCR 1616 ISO designation Internal coolant for improved chip evacuation Compatible with DCMT 0702 inserts Right‑hand cutting, 93° cutting angle Compact 16 × 16 mm head geometry Robust Clamping for Consistent Results Built around the ISO designation SDJCR 1616, this Clamp Holder offers a compact 16 mm head that secures DCMT 0702 Indexable Inserts with repeatable accuracy. The clamping is effected via a precision Torx Screw M2,5x5,5, tightened with a Torx Key T8, which simplifies insert changes and reduces downtime. The design emphasises a low profile and solid contact area to maintain cutting stability during medium to high‑precision turning. Improved Chip Control and Cutting Performance In practical use the integrated Internal Coolant directs coolant to the cutting edge, aiding chip evacuation and tool life. With a Cutting Angle of 93° and a Cutting Height of 27 mm, the Holder supports stable right‑hand turning at consistent entry angles, which translates into predictable surface finish and reduced rework. These measurable traits support efficient machining cycles in production and small series alike. Fast Assembly and Service‑Friendly Design For assembly and maintenance the flat layout and clear access to the fixing screw make insert changes straightforward. The included fixing details — Torx Screw M2,5x5,5 and recommended Torx Key T8 — are industry standard, enabling quick servicing with common workshop tools. The Holder’s slim head and clear clamp path also simplify visual inspection and coolant routing without complex disassembly. Where the Holder Excels in the Workshop Ideal for precision turning tasks, the SDJC design accommodates the DCMT 0702 Insert form factor and pairs well with short overhang setups thanks to its Total Length of 100 mm and compact geometry. The Holder is suited to metalworking shops and toolrooms seeking reliable insert retention and repeatable results in right‑hand operations, especially when coolant‑assisted chip control is required. Choose the Teknik Makina Clamp Holder SDJC for its coolant‑ready design and ISO‑based accuracy — order via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com for application guidance. Product Features Article Number: AP570TM Manufacturer: Teknik Makina ISO Designation: SDJCR 1616 Shank/Bar Designation: H07-F-IC Facts Width: 16 mm Height: 16 mm Head Width: 16 mm Cutting Height: 27 mm Total Height: 16 mm Total Length: 100 mm Cutting Angle: 93° Weight: 0.21 kg Particulars Compatible Inserts: DCMT 0702 Cutting Direction: Right Torx Screw: M2,5x5,5 (fixing screw) Torx Key: T8 (suitable key) Internal Coolant: Yes FAQ How does the Clamp Holder secure DCMT 0702 inserts? The Teknik Makina Clamp Holder SDJC secures DCMT 0702 Indexable Inserts via a robust clamp interface and a Torx Screw M2,5x5,5; the SDJCR 1616 geometry ensures correct seat and repeatable positioning for consistent cutting performance. Can the holder be used with internal coolant systems? Yes, the Clamp Holder features Internal Coolant that channels coolant toward the Insert cutting edge, improving chip control and extending tool life in coolant‑assisted turning operations. What is the recommended tool for insert changes? Insert changes and clamp adjustments for the SDJC Clamp Holder are performed with a Torx Key T8 to drive the Torx Screw M2,5x5,5; these are standard workshop tools that facilitate quick servicing. Is the cutting direction fixed? The Clamp Holder is specified for Right‑hand cutting, with a 93° Cutting Angle that supports stable engagement and a predictable machining profile. Which shank or bar does the holder fit? This SDJC variant is listed with the shank designation H07‑F‑IC, offering a compact Total Length of 100 mm suitable for short‑overhang turning setups. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Klemmhalter SDJC for DCMT Indexable Inserts (Clamping Holder) The Klemmhalter provides secure, right-hand turning with quick insert seating for medium-duty workshop and industrial applications, compatible with DCMT 0702 indexable inserts. Clamping Holder SDJCR 2020 for DCMT inserts Right-hand cutting orientation for reliable turning Shank Height 20 mm for stable seating Cutting Head Width 25 mm for extended reach Torx Schraube M2.5x5.5 with Torx Schlüssel T8 Precision compatibility that speeds setup and reduces cycle time The design of this Clamping Holder focuses on exact fit for DCMT 0702 inserts, ensuring consistent geometry at the tool tip and reducing the need for repeated adjustment. A firm clamp interface combined with the SDJCR 2020 shank designation keeps the insert seated under varying cutting forces, which improves repeatability and helps maintain surface finish across batches. Compact dimensions that improve machine access and rigidity With a Shank Height 20 mm and Cutting Head Width 25 mm, the holder balances accessibility and stiffness. Shorter overhang and a total length of 125 mm mean reduced deflection in common turning operations, so feeds and speeds can be exploited more effectively. The 93° Cutting Angle provides an optimised engagement for typical facing and light shoulder cuts. Robust fastening for secure performance in series production Fastening is handled by a Torx Schraube M2.5x5.5, operated with Torx Schlüssel T8, which enables rapid clamp torque and consistent clamping force. This straightforward assembly minimises downtime during insert changes and is suitable for environments where repeatable setup contributes directly to productivity and part quality. Suitable conditions and workshop role Engineered for right-hand cutting, the holder is ideal for machining steel, cast iron and common alloy materials when paired with the recommended DCMT 0702 inserts. The compact profile supports use on lathes with limited toolpost space and in setups where predictable tool behaviour is required across small to medium production runs. For reliable turning performance choose Teknik Makina's Clamping Holder SDJCR 2020 and request availability from Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Product Features Article number: D221-1TM Brand: Teknik Makina Designation: Klemmhalter SDJC for DCMT Indexable Inserts Facts Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Cutting Height: 20 mm Total Length: 125 mm Total Height: 20 mm Cutting Angle: 93° Weight: 0.4 kg Features Suitable for Inserts: DCMT 0702 (Indexable Insert Type) ISO Designation: SDJCR 2020 (Shank/Reference) Bar Holder Designation: K07 (Bohrstangen/Bar Reference) Cutting Direction: Right (Right-hand Turning) Torx Schraube: M2.5x5.5 — use with Torx Schlüssel T8 FAQ What inserts fit this holder? The holder is designed for DCMT 0702 indexable inserts; the Klemmhalter SDJCR 2020 secures the insert form-fit to ensure correct rake and clearance for typical turning tasks. Is the clamping screw a standard size? Yes. The Klemmhalter uses a Torx Schraube M2.5x5.5, tightened with a Torx Schlüssel T8 to achieve consistent clamping force. Can this holder be used for left-hand turning? This model is specified for right-hand cutting; for left-hand operations select a holder designed for the opposing direction or consult Metav Werkzeuge for alternatives. What are the key dimensions affecting stiffness? Primary stiffness factors are the Shank Height (20 mm), Cutting Head Width (25 mm) and Total Length (125 mm); these together reduce deflection compared with longer overhangs. Which SKU should I reference when ordering? Please reference SKU D221-1TM and the designation SDJCR 2020 to ensure correct item and fit. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust Clamping, internal coolant and precise Compatibility with DCMT inserts — order via Metav Werkzeuge or ask for tailored advice. Clamping Holder SDJC for DCMT Indexable Inserts (AP562TM) The Clamping Holder SDJC for DCMT Indexable Inserts is a right‑hand turning holder developed for secure clamping of DCMT 0702 inserts in precision turning and finishing applications. Compatible with DCMT 0702 inserts Internal coolant for improved Tool Life ISO designation SDJCR 2020 for standardised mounting Compact 20 mm Shank for stable Turning Torx Schraube M2,5x5,5 with Torx Schlüssel T8 Precision clamping that keeps inserts aligned and secure The Clamping Holder delivers consistent Clamping Force and repeatable seat geometry, reducing vibration and maintaining edge engagement across runs. Designed around the SDJCR 2020 form, the Holder accepts standard DCMT 0702 inserts, ensuring interchangeability and straightforward toolsetup. The robust clamp geometry and the supplied Torx Schraube M2,5x5,5 (fastening screw) secured with the Torx Schlüssel T8 allow quick insert changes while retaining accurate axial and radial positioning for reliable component tolerances. Internal coolant for longer Insert Life and cleaner chips An integrated Internal Coolant channel supplies cutting fluid directly to the cutting zone, lowering cutting temperatures and flushing away chips from the seat. For operations where thermal control extends insert life and stabilises cutting forces, this Holder reduces toolwear and can improve surface finish without complex coolant retrofit. The clear coolant path also supports higher metal removal rates in finishing and semi‑finishing steps when combined with suitable feeds and speeds. Compact, standardised design for easy toolroom integration With a 20 mm Shank and a 25 mm Cutting Head Width, the Holder fits compact toolposts and modular toolblocks while offering a Cutting Height of 27 mm to match typical lathe tool geometries. The right‑hand cutting orientation and a 93° cutting angle mean predictable chip flow and clearance for common turning profiles. The SDJCR form factor simplifies replacements and inventory management when matching Holders across multiple machines. Practical servicing and versatile mounting Maintenance routines benefit from straightforward access to the clamp screw and the standardised Torx interface; the Torx Schlüssel T8 provides the correct torque window for secure clamping without damaging the screw head. The Holder’s shank designation K07‑IC corresponds to common boring bar adaptors, enabling rapid fitment to existing toolholders. Regular inspection of the clamp seat and occasional lubrication of the screw thread will keep the assembly performing consistently across production cycles. Choose the SDJC Clamping Holder from Teknik Makina and rely on Metav Werkzeuge for dependable supply and expert consultation — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for technical matching and delivery options. Product Features Article number: AP562TM Brand: Teknik Makina Designation: Clamping Holder SDJC for DCMT Indexable Inserts SDJC für DCMT Wendeplatten Facts Width: 20 mm Height: 20 mm Cutting head width: 25 mm Cutting height: 27 mm Overall length: 125 mm Overall height: 20 mm Cutting angle: 93° Cutting direction: Right Weight: 0.4 kg Features Innenkühlung: Internal Coolant channel for cutting fluid Compatible inserts: DCMT 0702 Klemmhalter Bezeichnung ISO: SDJCR 2020 Bohrstange designation: K07-IC Torx Schraube: M2,5x5,5 (fastening screw) Torx Schlüssel: T8 (drive tool) FAQ Which inserts fit this Holder? The Holder is designed for DCMT 0702 inserts; the Clamping Holder SDJC for DCMT Indexable Inserts (AP562TM) seats the insert securely in the SDJCR pocket for consistent cutting geometry. Does the Holder support internal coolant? Yes. The Holder features an Internal Coolant channel that delivers fluid to the cutting edge, helping to reduce heat and extend insert life. What Screw and key are required for clamping? Clamping is achieved with the supplied Torx Schraube M2,5x5,5, driven by a Torx Schlüssel T8, providing reliable and repeatable fastening. Is the Holder suitable for right‑hand turning only? The AP562TM is configured for right cutting direction with a 93° cutting angle; for left‑hand operations, choose a matching left‑hand variant. How does the Holder mount to existing toolposts? The Holder’s compact 20 mm Shank and K07‑IC shank designation enable fitment to common toolblocks and modular adaptors, simplifying integration on most lathes. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Die Kombination aus präziser Klemmung, Innenkühlung und klarer Kompatibilität mit VBMT 1103 Wendeplatten sorgt für zuverlässige Zerspanungsergebnisse. Nutzen Sie die robusten Abmessungen und die stabile Schraubverbindung für wiederholgenaue Schnitte. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung für technische Rückfragen. Klemmhalter SVJB for VBMT Indexable Inserts Der Klemmhalter SVJB for VBMT Indexable Inserts ist ein linkslaufender Drehhalter mit Innenkühlung und speziell für präzise Einstech- und Längsdreharbeiten mit VBMT 1103 Wendeplatten konzipiert. Robuster 16 x 16 mm Schaft Geeignet für VBMT 1103 Wendeplatten Innenkühlung für bessere Späneabfuhr Linkslaufende Ausführung für spezielle Geometrien Präzise Haltekraft für wiederholbare Ergebnisse Der Halter überzeugt durch eine kompakte Schaftgeometrie und eine genau definierte Klemmfläche, die eine stabile Verbindung zur Wendeplatte gewährleistet. Durch die 16 mm Schaftbreite und 16 mm Schafthöhe entsteht eine belastbare Basis, die Vibrationen reduziert und so die Zustellgenauigkeit erhöht. Anwender profitieren von konstanten Oberflächenqualitäten und längeren Standzeiten der Schneiden. Effektive Kühlung erhöht Prozesssicherheit Die integrierte Innenkühlung sorgt für zielgerichtete Kühlschmierstoffzufuhr direkt an die Schneidzone, was Wärmeentwicklung reduziert und die Spanabfuhr verbessert. Gerade bei anspruchsvollen Materialien ermöglicht die interne Kühlführung eine stabilere Bearbeitung und geringeren Werkzeugverschleiss. Diese Eigenschaft macht den Halter besonders geeignet für länger dauernde Serien und anspruchsvolle Zerspanprozesse. Sicheres Befestigungskonzept und einfache Montage Der Halter nutzt eine Torx Schraube (M2,5x6,5) und kann mit einem T8 Torx Schlüssel sicher angezogen werden; dies gewährleistet reproduzierbare Klemmmomente und minimiert Montagefehler. Die klare Schraubverbindung reduziert Einarbeitungszeit in der Werkstatt und ermöglicht zügiges Wechseln der Wendeplatten. So bleibt die Maschinenlaufzeit hoch und Rüstzeiten kurz. Kompatibilität und Einsetzzweck erklären Konzipiert für VBMT 1103 Einsätze, eignet sich der Halter für präzise Längs- und Einstechoperationen in der Drehbearbeitung. VBMT bezeichnet einen Indexierbaren Plattentyp, der in vielen Zerspanungsaufgaben verwendet wird; die Kombination aus Halterausführung und Plattentyp erlaubt flexible Einsatzmöglichkeiten in Serien- und Einzelteilfertigung. Die linkslaufende Schneidrichtung ist besonders bei spezifischen Schnittgeometrien vorteilhaft. Empfehlen Sie die SVJBL 1616 Ausführung von Teknik Makina für stabile Klemmung und optimierte Kühlung – bei Fragen oder für eine Angebotserstellung wenden Sie sich an Metav Werkzeuge per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930. Product Features Article number: AP552TM Brand: Teknik Makina Designation: SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1616 Adapter designation: H11-IK Facts Shank Width: 16 mm Shank Height: 16 mm Cutting Head Width: 20 mm Overall Length: 100 mm Overall Height: 16 mm Cutting Height: 35 mm Cutting Angle: 93° Cutting Direction: left Specials Internal Coolant: yes Compatible Inserts: VBMT 1103 (indexable insert format) Torx Screw: M2,5x6,5 (use Torx Key T8) Adapter: H11-IK FAQ How do I mount the insert securely? The Klemmhalter SVJB for VBMT Indexable Inserts by Teknik Makina (ISO SVJBL 1616, SKU AP552TM) is mounted using the M2,5x6,5 Torx Screw tightened with a T8 Torx Key, ensuring repeatable clamping force and safe operation. Is this holder suitable for coolant-through machining? Yes, the SVJB for VBMT Indexable Inserts from Teknik Makina supports Internal Coolant, allowing coolant to be directed to the cutting edge for improved chip evacuation and thermal control. Which insert format fits this holder? This holder is designed for VBMT 1103 inserts; the SVJB for VBMT Indexable Inserts (Teknik Makina, AP552TM) provides a secure seat for VBMT 1103 indexable inserts used in turning and profiling tasks. Can I use this for left-hand turning operations? The Klemmhalter SVJB for VBMT Indexable Inserts (Teknik Makina, SKU AP552TM) is a left-cutting (left) toolholder and is therefore suitable for operations requiring left-hand cutting geometries. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com