Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a robust 32 mm diameter tool with a 72 mm cutting length and secure 60 mm shank engagement for consistent bore quality; order supply or request advisory support via Metav Werkzeuge for fast, reliable delivery and technical guidance. Solid drill for XC-- 170504 indexable inserts — 32 mm, L133 mm (Teknik Makina) The solid drill for XC-- 170504 indexable inserts is a precision drilling solution intended for industrial machining where secure insert clamping and repeatable bore geometry are essential *32 mm diameter for stable boreholes *72 mm cutting length for deep cuts *Compatible with XC-- 170504 indexable inserts *Robust design by Teknik Makina Improved cutting performance and consistent bore quality The combination of a 32 mm diameter and a 72 mm cutting length provides an optimised balance between rigidity and reach, reducing vibration and improving roundness in through-holes and deep bores. A 60 mm shank engagement ensures firm clamping in standard toolholders, which contributes to dimensional stability during interrupted cuts. By accepting XC-- 170504 indexable inserts, the tool separates cutting-edge wear from the tool body, enabling fast insert changes and predictable process windows. These measurable characteristics support higher first-pass yield and more consistent cycle times on production parts. Faster intervention and simplified tooling logistics Using standard indexable inserts reduces machine downtime because worn inserts can be replaced without regrinding the body. Compatibility with XC-- 170504 inserts from Ceratizit makes sourcing straightforward and helps to harmonise inventory across multiple tool families. The insert-based concept also permits selection of grades and geometries that match application needs without changing the drill body, which is especially beneficial for mixed-production environments. This approach lowers the administrative burden of tool management and streamlines the process of adapting to different workpiece materials. Workshop-ready design for dependable handling and integration An overall length of 133 mm and a well-proportioned mass of 0.812 kg make the tool easy to handle during setup while remaining stable in use. The solid construction by Teknik Makina is engineered for repetitive operation and predictable mounting behaviour. Where clamping security and repeatability matter, the specified 60 mm shank length provides sufficient engagement to maintain concentricity across multiple tool changes. Supplied through Metav Werkzeuge, the product benefits from a European distribution and quality control filter that supports reliable stock availability and consistent delivery to the shop floor. For ordering, availability checks or technical advice on Teknik Makina solid drills with XC-- 170504 compatibility, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored recommendation Technical data Article number: U069TM Product type: Solid drill Brand: Teknik Makina Compatible inserts: XC-- 170504 Facts Diameter: 32 mm Overall length: 133 mm Cutting length: 72 mm Shank length: 60 mm Weight: 0.812 kg Special features Compatible inserts manufacturer: Ceratizit Indexable insert concept for quick replacement Label: 32mm Vollbohrer XC-- 170504 L133mm FAQ Which insert type fits this drill? The drill accepts XC-- 170504 indexable inserts; matching inserts from Ceratizit are recommended for optimal performance with the Teknik Makina solid drill (SKU U069TM). What are the key dimensions of the tool? Diameter 32 mm, cutting length 72 mm, overall length 133 mm and shank length 60 mm are the primary dimensions for tool selection and holder compatibility. Can the cutting performance be adjusted without replacing the drill body? Yes, cutting parameters and life are adjusted by changing the XC-- 170504 insert grade and geometry rather than the drill body, enabling rapid adaptation to different materials. How is the tool clamped in the machine? A 60 mm shank engagement is specified to ensure secure clamping in standard toolholders, which helps to maintain concentricity during machining operations. Are spare parts or inserts specified for maintenance? Replacement is achieved via the indexable inserts; use the specified XC-- 170504 inserts (Ceratizit) for routine maintenance and to restore cutting performance quickly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, high-performance drilling solution that combines a 32 mm working diameter with a 72 mm cutting length for efficient holemaking; its compatibility with XC-- 170504 indexable inserts ensures quick tool change and predictable production flow — order directly via Metav Werkzeuge or consult our specialists for application guidance. Indexable insert drill U26TM – 32 mm, L133 mm (Teknik Makina) A Indexable insert drill U26TM engineered for dependable holemaking in production and maintenance environments, compatible with XC-- 170504 indexable inserts. 32 mm diameter for deep hole drilling Compatible with XC-- 170504 indexable inserts 72 mm effective cutting length 133 mm overall length for extended reach Robust design, 0.812 kg tool weight Faster, cost-efficient holemaking with indexable inserts The tool body delivers consistent cycle times thanks to its 32 mm diameter and the ability to accept XC-- 170504 indexable inserts, which allow rapid insert replacement without regrinding. This approach reduces downtime and lowers per-hole costs compared with solid-carbide alternatives. The 72 mm cutting length provides sufficient engagement for deep holes while keeping chip evacuation stable; for workshops seeking predictable throughput, the combination of replaceable cutting edges and a rigid tool body enables an economical, high-yield machining strategy. Stable clamping and predictable tool life for production environments Designed with a 60 mm shank and an overall length of 133 mm, the drill offers a balanced compromise between reach and stiffness. The longer shank supports deeper approaches when required, while the reduced overhang helps maintain bore roundness and surface finish. Compatibility with Taegutec-compatible inserts ensures access to a wide range of grades and coatings for different materials, allowing the tool to be adapted to application-specific demands. The replaceable-insert system also simplifies inventory management: only inserts need periodic replacement, rather than entire tool bodies. Easy integration into the workshop and clear servicing path Integration into existing toolholders and tool management systems is straightforward thanks to the standardised insert format and conventional shank dimensions. The modular concept shortens maintenance cycles and supports quick setup changes across batches. For teams new to indexable drilling, the clarified geometry of the tool body and the use of established insert grades make parameter selection more predictable, reducing trial-and-error. For further technical advice on application parameters or insert selection, Metav Werkzeuge provides precise guidance and rapid supply from its Emmerich hub. For reliable high-throughput drilling with Teknik Makina’s proven indexable system, contact Metav Werkzeuge for tailored recommendations and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U26TM Label: 32 mm indexable insert drill XC-- 170504 L133 mm ECLASS: 21180201 Dimensions & weight Diameter: 32 mm Overall length: 133 mm Cutting length: 72 mm Shank length: 60 mm Weight: 0.812 kg Compatibility & features For indexable inserts XC-- 170504 Compatible insert manufacturer: Taegutec Product type: Indexable insert drill Manufacturer: Teknik Makina FAQ Which inserts fit this drill? This drill accepts XC-- 170504 indexable inserts; the geometry is compatible with Taegutec insert grades commonly stocked for industrial applications. What is the maximum drilling depth? Effective cutting depth is defined by the 72 mm cutting length and the 133 mm overall length, providing sufficient reach for standard deep-hole operations within those limits. How does insert replacement affect uptime? Using indexable inserts reduces downtime significantly: worn edges are replaced quickly without replacing the whole body, which is the intended workflow for the U26TM tool body. Is the drill suitable for batch production? Yes — the combination of a robust shank, standardised insert format and predictable cutting length makes it suitable for repetitive production runs and job-shop environments. Which vendor supplies the body and who supplies the inserts? The tool body is supplied by Teknik Makina (U26TM); inserts in the XC-- 170504 format can be sourced from Taegutec and similar manufacturers Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of high cutting reach, secure clamping and broad insert compatibility for uninterrupted production. The solid design with a Ø 32 mm cutting body and 128 mm cutting length delivers stable performance in industrial drilling applications; order the tool directly via Metav Werkzeuge or consult the in-house experts for specification matching. U732TM solid drill — Ø 32 mm, 128 mm cutting length, Teknik Makina A U732TM solid drill engineered as an indexable drill body for use with SPMG 0904 inserts from major makers, suited to industrial machining and heavy-duty bore operations Ø 32 mm diameter for stable drilling Compatible with SPMG 0904 inserts (Taegutec, YG-1) 128 mm cutting length for extended reach 220 mm overall length and 58 mm clamping length Stable rigidity for repeatable bore quality The design focuses on axial and radial stiffness to keep bores accurate under load. With a Ø 32 mm body and a 128 mm cutting length, the tool provides a balance between reach and rigidity that reduces vibration and run-out. Compatibility with SPMG 0904 indexable inserts from Taegutec and YG-1 ensures a wide choice of grade and geometry options, allowing machining parameters to be matched precisely to the workpiece and cycle requirements. This results in fewer tool changes and consistent bore geometry when machining series parts. Reduced downtime and predictable tool life A secure clamping interface and a 58 mm clamping length offer reliable fixation in standard toolholders, improving repeatability after re‑clamping. The indexable concept enables swift insert replacement instead of regrinding, which reduces maintenance time and keeps machines productive. At a listed mass of 1.014 kg, the component balances inertia for steady cutting with manageable handling during setup. These attributes contribute to a predictable cost‑per‑hole and support economical operation in production environments where throughput and repeatability are priorities. Easy integration into existing machining systems The tool’s 220 mm overall length and standard 32 mm shank diameter simplify integration with common arbour and holder systems. Technical drawings and data files are available for verification during process planning to ensure correct reach and clearance in multi‑operation setups. The SKU U732TM identifies the exact configuration for procurement and inventory management. Sourcing via Metav Werkzeuge benefits from a European quality filter and logistical reliability, making stock and replacement planning straightforward for workshops and industrial customers. Contact Metav Werkzeuge for specification matching and procurement of Teknik Cutting Tools products; local stock information and technical consultancy are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: U732TM Product: solid drill (indexable) Brand: Teknik Makina Insert type: SPMG 0904 Compatible insert manufacturers: Taegutec, YG-1 Facts Diameter: 32 mm Cutting length: 128 mm Clamping length: 58 mm Overall length: 220 mm Weight: 1.014 kg Special features Solid drill body design Indexable insert system Two technical files available (IDs: 62de7ec233927e49dbf3276b, 62de7dd60f56dbb4de4dbedd) FAQ Which insert type is required for this indexable drill? The indexable drill uses SPMG 0904 inserts; compatibility with inserts from Taegutec and YG‑1 is indicated for this configuration. What is the effective cutting reach of the tool? The tool offers a 128 mm cutting length and a 220 mm overall length, providing extended reach while maintaining rigidity for through‑hole and deep bore tasks. What clamping dimensions are required for secure fixation? A clamping length of 58 mm and a 32 mm shank diameter are specified for correct holder engagement and repeatable set‑up. How is the U732TM identified for ordering and stock control? The SKU U732TM should be used when specifying this solid drill to ensure the correct configuration and insert compatibility are supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, compatible drilling solution that combines reliable compatibility with SPMG 0904 inserts, a stable 32 mm shank and a 96 mm cutting length for consistent hole quality. Order the item directly via Metav Werkzeuge or consult the Metav specialists for application advice and delivery options. Vollbohrer U832TM — Indexable drill body, 32 mm shank, SPMG 0904 compatible (Teknik Makina) The Vollbohrer U832TM is an indexable drill body engineered for precise holemaking in CNC and conventional machining, suitable for use with square SPMG 0904 inserts from major manufacturers. 32 mm shank diameter Compatible with SPMG 0904 inserts 96 mm cutting length Overall length 188 mm Rapid dispatch for professionals Stable geometry that shortens setup and run times The robust 32 mm shank and an overall length of 188 mm provide axial stability during bore production, reducing chatter and surface variation. With a cutting length of 96 mm and a shank length of 58 mm, the tool body maintains concentricity over the working span, which results in fewer reworks and improved process repeatability. Compatibility with standard insert formats avoids custom tooling and simplifies spare-part logistics, delivering measurable gains in uptime and throughput. Flexible insert system to lower operating costs Designed for SPMG 0904 inserts and compatible with mainstream insert suppliers Taegutec and YG-1, the tool body uses replaceable cutting edges rather than monolithic geometry. This indexable inserts approach enables rapid edge changes, shorter machine downtime and predictable cost per hole. For operations that value inventory rationalisation, the interchangeability of inserts supports a leaner tooling stock while preserving cutting performance under varying workpiece materials. Logistics and support aligned with production needs Available with rapid dispatch, the product benefits from Metav’s European distribution and quality assurance. The tool’s weight of 0.923 kg and balanced design make it easy to handle at the machine, while the widespread availability of compatible inserts ensures quick restoration of cutting capability. Should further technical data be required, Metav’s advisers can supply application recommendations and compatible insert grades to suit particular workpiece requirements, supporting continuous production without unnecessary delay. For reliable supply and application guidance for the Teknik Cutting Tools indexable drill body, contact Metav Werkzeuge for tailored advice and procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U832TM Manufacturer: Teknik Makina Product: Vollbohrer Compatible inserts: SPMG 0904 Facts Diameter: 32 mm Overall length: 188 mm Cutting length: 96 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.923 kg Features Compatible with Taegutec and YG-1 inserts Indexable insert concept (replaceable cutting edges) Suited to CNC drilling applications FAQ What insert type does this drill accept? The drill body accepts SPMG 0904 inserts; the design supports widely available insert geometries for simple reconditioning. Which insert manufacturers are compatible with the tool body? Compatibility is confirmed for Taegutec and YG-1 inserts, enabling flexible sourcing of replacement cutting edges for the U832TM. What are the key dimensions affecting stiffness? Stiffness is influenced by the 32 mm shank diameter, 58 mm shank length and an overall length of 188 mm, which together support stable drilling performance. Is the tool suitable for high-production CNC environments? Yes. The indexable design and standard insert compatibility make the tool body well suited to production runs where quick insert changes and predictable tool life are priorities. How heavy is the tool and how does that affect handling? The tool weighs 0.923 kg, a mass that balances rigidity with manageable handling during tool changes and setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 32 mm shank rigidity, a 40 mm effective cutting length and quick indexable insert changes for consistent production results; order the tool directly via Metav Werkzeuge or consult our advisors for application support. S240TM Shank Milling Cutter — 32 mm, for APMT 11T3 Indexable Inserts (Teknik Makina) The S240TM is a shank milling cutter designed for stable face and slot milling using APMT 11T3 indexable inserts, optimised for workshops and CNC environments where fast insert changes and rigidity matter 32 mm shank diameter for high rigidity Compatible with APMT 11T3 indexable inserts 40 mm effective cutting length Secured with M2.5×5.5 Torx screw Engineered stability for precision machining The design focuses on delivering stable cutting performance by combining a solid 32 mm shank with a balanced overall length of 125 mm. These dimensions reduce vibration and enable repeatable positioning in the tool holder, which contributes directly to improved surface finish and dimensional consistency. The geometry includes 4 cutting edges, permitting smoother engagement with the workpiece and distributing cutting forces more evenly; in practice this means fewer rejects and less rework when producing repeated features. The 90° cutting angle supports unified face milling and shoulder operations, making the tool a dependable choice where rigidity and repeatability are required. Indexable inserts for rapid tool change and lower running cost The cutter accepts APMT 11T3 indexable inserts, an established insert format that offers quick replacement and predictable cutting behaviour. Using indexable inserts reduces downtime: worn inserts are swapped in seconds without replacing the entire tool body, supporting continuous operation on production lines. The clamping is specified with a M2.5×5.5 Torx screw and a T8 key, ensuring a secure, repeatable seat for each insert change. This system is cost-efficient over time because insert stocking is cheaper than multiple solid cutters, and it simplifies tooling logistics in mixed-batch environments where flexibility and inventory control matter. Practical handling and workshop compatibility With a 40 mm effective cutting length and a modest mass of 0.764 kg, the cutter balances rigidity with manageable handling for manual set-up and automated tool changes alike. The nominal 32 mm diameter suits a wide range of tool holders and milling spindles used in small to medium CNC machines. Compatibility with Korloy-manufactured inserts has been noted, widening options for insert selection. For shop-floor teams, this translates to a reliable tool that integrates with standard insert inventories, reduces changeover complexity and supports both short production runs and longer series where consistent cut quality is essential. For production environments that prioritise rigidity and fast insert replacement, contact Metav Werkzeuge to discuss the S240TM from Teknik Makina and receive tailored application advice — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: S240TM Manufacturer: Teknik Makina Designation: Shank milling cutter for APMT 11T3 indexable inserts eClass: 21180806 ETIM: EC011860 Core technical data Diameter: 32 mm Shank diameter: 32 mm Effective cutting length: 40 mm Overall length: 125 mm Number of cutting edges: 4 Weight: 0.764 kg Cutting angle: 90° Special features Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx screw: M2.5×5.5 Torx key size: T8 Indexable insert system for fast changes FAQ What makes this cutter particularly stable in use? The S240TM achieves stability through its 32 mm shank and balanced overall length, which reduce vibration and provide consistent seating in the tool holder for improved surface finish. Which inserts fit the cutter? This shank milling cutter accepts APMT 11T3 indexable inserts; compatibility with Korloy inserts is specified, allowing selection from established insert grades. How are inserts secured to the cutter? Inserts are fastened using an M2.5×5.5 Torx screw; the corresponding key size is T8, ensuring a repeatable and secure clamping position. Is the cutting length suitable for face and slot milling? The tool offers a 40 mm effective cutting length, which supports both shallow face milling and moderate-depth slotting where a stable tool body is required. What are the key dimensions to check before ordering? Important dimensions are 32 mm diameter, 40 mm cutting length and 125 mm overall length; confirming toolholder clearance and spindle compatibility is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the internal coolant and 32 mm shank to achieve stable clamping and extended insert life; secure the S242-1TM via Metav Werkzeuge for fast supply from Emmerich or consult our specialists for configuration advice. 32 mm Shank Milling Cutter S242-1TM — for APMT 11T3 indexable inserts, internal coolant (Teknik Makina) 32 mm Shank Milling Cutter S242-1TM is a robust milling cutter body designed for indexable inserts and medium‑to‑long reach milling tasks in industrial production. Internal coolant for improved tool life 32 mm shank diameter for stable clamping Compatible with APMT 11T3 Korloy inserts Overall length 180 mm for extended reach Optimised coolant feed for consistent cutting performance The integrated internal coolant channel delivers cutting fluid directly to the cutting zone, which supports reliable chip evacuation and prevents premature insert wear. By reducing heat at the cutting edge, the coolant channel helps to extend insert life and maintain consistent surface finish across batch runs. This design reduces downtime associated with frequent insert changes and contributes to steady productivity in repetitive milling operations. Rigidity and repeatability for precision machining A 32 mm shank combined with a solid L180 mm body delivers the rigidity required for repeatable results in shopfloor milling. The stable clamping geometry minimises vibration and deflection, enabling tighter tolerances and more predictable tool life. With four cutting edges, the cutter body provides balanced cutting forces that support smoother passes and consistent dimensional accuracy, particularly in stepped or face milling tasks where stability is essential. Straightforward insert handling and maintenance The cutter accepts APMT 11T3 indexable inserts and is supplied with fasteners sized M2.5x6.5, tightened with a T8 Torx key for secure seating. Compatibility with Korloy inserts offers a wide aftermarket choice and simplifies stocking of spare inserts. The arrangement permits quick indexation and replacement, reducing machine downtime and helping to keep production flowing without complex service procedures. Designed for production environments and procurement efficiency With an overall length of 180 mm and a cutting shank length of 50 mm, the tool is engineered for applications that require reach without sacrificing stiffness. The cutter’s weight and dimensions suit robust toolholders and standard tool management systems, while the compatibility with widely used APMT inserts assists procurement by aligning with common inventory items. Combine these attributes to reduce complexity at the tool crib and to improve process reliability across a range of milling operations. Contact Metav Werkzeuge to specify the Teknik Cutting Tools 32 mm shank milling cutter S242-1TM with internal coolant for your application or to arrange supply directly from our Emmerich stock—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: S242-1TM Label: 32mm shank milling cutter APMT 11T3 L180mm with internal coolant Manufacturer: Teknik Makina ECLASS: 21180806 Core specifications Diameter: 32 mm Overall length: 180 mm Shank diameter: 32 mm Cutting length (shank): 50 mm Cutting edges: 4 Weight: 1.123 kg Special features Internal coolant: yes Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx key: T8 Screw: M2.5x6.5 Product type: Shank milling cutter FAQ Which inserts fit this cutter? The cutter accepts APMT 11T3 indexable inserts; use Korloy or equivalent APMT 11T3‑type inserts for best compatibility with the S242-1TM (Teknik Cutting Tools). Does the tool provide coolant through capability? Yes — the S242-1TM features internal coolant, which directs cutting fluid to the insert edge to support chip evacuation and improved insert life. What are the shank and overall dimensions? The tool has a 32 mm shank diameter and an overall length of 180 mm, with a shank cutting length of 50 mm, offering a balance of reach and rigidity. Which fastening parts are used for inserts? Insert screws are M2.5x6.5 and require a T8 Torx key for tightening; these make insert changes straightforward while ensuring secure clamping in the S242-1TM. Is this body suitable for heavy production use? Yes — the combination of a 32 mm shank, four cutting edges and internal coolant makes the cutter well suited to repeated production cycles where stability and consistent insert performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high rigidity and precise insert compatibility to maintain stable machining cycles and consistent surface quality. The 32 mm shank together with a 200 mm overall length and 60 mm cutting length ensures dependable clamping and deep-reach capability for medium-duty milling operations; order directly via Metav Werkzeuge or request technical advice from the consultants. Insert Milling Cutter S685TM for LOGU 0303 – 32 mm shank, L200 mm (Teknik Makina) The Insert Milling Cutter S685TM delivers stable, indexable-insert milling for applications using LOGU 0303 inserts, engineered for reliable toolholding and repeatable performance in production environments. 32 mm shank diameter for stable clamping Compatible with LOGU 0303 indexable inserts 200 mm overall length with 60 mm cutting length Five cutting edges for uninterrupted material removal Higher process stability through rigid shank design A robust 32 mm shank and a total length of 200 mm reduce vibration and enable steady tool engagement during interrupted cuts. The combination of shank diameter and mass provides improved stiffness, which leads to more consistent tool life and surface finish. Where deeper reaches are required, the 60 mm cutting length offers extended engagement without compromising clamping security. These factors contribute directly to reduced scrap rates and lower secondary processes in a production setting. Proven insert system and secure fastening for predictable cycles Designed to accept LOGU 0303 indexable inserts, the cutter offers straightforward insert replacement and consistent cutting geometry across tool life. Compatibility with Kyocera-type inserts simplifies procurement for workshops already standardised on that system. The cutter uses an M3x7 Torx screw secured with a T8 key for repeatable clamping torque, which supports secure seat retention and minimises the risk of improper assembly affecting process reliability. Productivity gains through efficient cutting configuration With five cutting edges, the tool supports higher material removal per revolution and smoother chip distribution, which helps to lower cycle time in suitable operations. The tool’s mass (approx. 1.256 kg) and cutting configuration are balanced to favour continuous production runs where consistent performance is required. For machine shops aiming to optimise throughput, this cutter represents a pragmatic choice that balances rigidity, reach and the economy of indexable inserts. Suitable applications and workshop integration This insert milling cutter is intended for general machining tasks where indexable inserts are preferred for economical edge changes and flexible geometry choices. It integrates easily into standard toolholders designed for a 32 mm shank and is suitable for batch production, retooling for different insert grades and for workshops seeking to reduce downtime during insert changes. The datasheet-specified dimensions make it straightforward to plan fixture and toolpath strategies without guesswork. For a reliable supply and expert selection assistance for the Teknik Makina S685TM insert milling cutter, request a technical quote from Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data SKU: S685TM Label: 32mm Schaftfräser LOGU 0303 L200mm Manufacturer: Teknik Cutting Tools UID: S685TM eClass: 21180806 Core specifications Shank diameter: 32 mm Overall length: 200 mm Cutting length (shank long): 60 mm Number of cutting edges: 5 Weight: 1.256 kg Features Compatible inserts: LOGU 0303 Compatible insert manufacturer: Kyocera Torx key: T8 Torx screw: M3x7 Product type: insert milling cutter FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; Kyocera-manufactured inserts confirmed compatible for this insert milling cutter. What are the key dimensions to verify for machine integration? Check the 32 mm shank diameter, 200 mm overall length and 60 mm cutting length against the machine toolholder and available working envelope. How is the insert secured on the cutter? Inserts are fastened using an M3x7 Torx screw tightened with a T8 key to ensure consistent clamp force and repeatable seating. Is this tool suitable for extended reach milling? The 200 mm overall length with a 60 mm cutting length provides moderate reach while maintaining improved rigidity compared with longer, slimmer tools. Can the S685TM be used in automated tool-change systems? Yes; the standard shank diameter and secure torx-fastened inserts are compatible with automated tool-change workflows provided holder geometry matches the 32 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert compatibility, internal coolant supply and a robust 32 mm shank for steady, high‑productivity milling; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank cutter S781TM – 32 mm shank, internal coolant, for XNKU 06T3 indexable inserts (Teknik Makina) Shank cutter S781TM for indexable milling, designed to carry XNKU 06T3 inserts for efficient face and peripheral machining in production and workshop environments. 32 mm shank diameter for high stability Internal coolant supply to the cutting zone Compatible with XNKU 06T3 indexable inserts Overall length 200 mm for extended reach Faster machining through optimised insert integration The S781TM is built around the proven XNKU 06T3 insert system, enabling predictable chip control and consistent edge engagement across operations. With 4 cutting edges and a direct coolant feed, the tool supports higher material removal rates and improved tool life by flushing chips away from the cutting zone. This results in shorter cycle times and fewer unplanned tool changes, making the cutter an efficient choice for workshops seeking measurable productivity gains. Easy servicing and secure clamping to reduce downtime Designed for straightforward maintenance, the cutter uses a T8 Torx drive and M2.5x5.5 screws for insert retention, allowing rapid, repeatable insert changes with standard workshop tools. The secure clamping system minimises vibration and runout, which protects insert edges and maintains surface finish. Clear specification of fastening hardware simplifies spare-part management and reduces set‑up time between operations. Rigidity and reach for stable, precise milling A 32 mm shank combined with a 200 mm overall length and a 120 mm cutting length provides an effective balance between reach and stiffness, suitable for a wide range of milling tasks where stability matters. The mass of the tool (approx. 1.088 kg) contributes to dampening of minor disturbances, improving dimensional consistency on longer cuts. Compatibility with Palbit-made inserts ensures widespread availability of cutting geometries and grades for varied materials and cutting conditions. Practical guidance for selection and application Select the cutter when axial reach and reliable coolant delivery are required alongside flexible insert choice. The combination of internal coolant and indexable inserts supports operations where chip evacuation and edge cooling are decisive for component quality. For tailored recommendations on insert grades, cutting data and fixture compatibility, Metav Werkzeuge’s application advisors can provide concrete, workshop‑level guidance to match the cutter to the job. Contact Metav Werkzeuge for application advice or to request the Teknik Makina S781TM — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for prompt, workshop-focused support and supply from Emmerich Technical data SKU: S781TM Manufacturer: Teknik Cutting Tools Product type: Shank cutter Compatible inserts: XNKU 06T3 (Palbit) Facts Shank diameter: 32 mm Overall length: 200 mm Cutting length (shaft): 120 mm Cutting edges: 4 Weight: 1.088 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant supply Indexable insert system compatibility Robust shank for reduced runout Standard Torx fastening for quick servicing FAQ Which inserts fit this cutter? The S781TM accepts XNKU 06T3 indexable inserts; insert availability is widely supported by Palbit. Is there internal coolant and why does it matter? Yes — internal coolant delivers cutting fluid directly to the cutting edge, improving chip evacuation and edge life for the S781TM during demanding cuts. What shank diameter and reach does the tool offer? The tool features a 32 mm shank and 200 mm overall length with a 120 mm cutting length, providing a balance of rigidity and extended reach. Which fastening tools are required for insert changes? Insert clamping uses a T8 Torx and M2.5x5.5 screws, enabling quick, repeatable insert replacement with common workshop tools. For which applications is this cutter suitable? The indexable shank cutter is suited to general face and peripheral milling where a stable shank and coolant supply improve productivity and edge life; discuss specific material and grade selection for optimal results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable stability and effective chip evacuation come together in this indexable-insert milling solution: a 32 mm shank and built-in internal coolant deliver consistent machining results across medium-production runs; order the cutter directly via Metav Werkzeuge or consult our specialists for process matching. Shaft milling cutter S765-2TM — 32 mm shank, internal coolant (Teknik Makina) A shaft milling cutter designed for ANHX 1206 indexable inserts, offering robust clamping stability and coolant-fed cutting for CNC milling applications. 32 mm shank diameter for stable clamping Internal coolant for improved chip control Compatible with ANHX 1206 Palbit inserts Higher productivity through stable clamping and coolant-fed cutting The tool body is engineered around a 32 mm shank, which ensures secure clamping and reduced runout for repeatable cuts. With a 200 mm overall length and a 130 mm cut-capable shank length, the design balances reach and rigidity for common milling setups. The integrated internal coolant channel directs coolant to the cutting zone, improving chip evacuation and reducing thermal load on the inserts — a straightforward way to extend tool life and maintain consistent surface finish in serial production. Quick insert changes and straightforward maintenance Designed for use with ANHX 1206 indexable inserts from Palbit, the cutter accepts three insert positions to support continuous material removal. The fastening system uses a T10 Torx interface and M3.5x8.5 Torx screws, allowing rapid, standardised replacement and secure seating of each insert. Indexable-insert systems separate the cutting edge from the tool body, enabling economical insert rotation or replacement without regrinding and maintaining machine uptime in busy workshops. Seamless integration into workshop and production workflows With a mass of 0.92 kg and three cutting edges, the tool offers a predictable dynamic behaviour when mounted in common milling spindles, helping to achieve stable feeds and cycle times. The combination of a compact shaft diameter and internal cooling supports application flexibility on CNC milling centres where coolant-fed tools are preferred for temperature control. The robust construction and standardised fastening mean simple inventory management and dependable interchangeability across similar toolholders. Contact Metav Werkzeuge to discuss suitability for specific parts, secure the Teknik Makina S765-2TM for your tooling range and benefit from expert advice and reliable supply from Emmerich. Technical data SKU: S765-2TM Type: Shaft milling cutter Brand: Teknik Makina Label: 32mm shaft milling cutter ANHX 1206 L200mm with internal coolant Facts Diameter: 32 mm Overall length: 200 mm Cut-capable shank length: 130 mm Weight: 0.92 kg Cutting edges: 3 Torx key: T10 Torx screw: M3.5x8.5 Design & special features Internal coolant Compatible with ANHX 1206 inserts Suitable for Palbit inserts Indexable-insert system FAQ What insert type does this cutter accept? The cutter accepts ANHX 1206 indexable inserts; it is designed to work with Palbit-compatible ANHX-style inserts. Is the tool coolant-fed and what is the benefit? Yes — the internal coolant supply directs fluid to the cutting zone, improving chip evacuation and helping to extend insert life. How many insert positions are fitted on the cutter? The tool features three cutting-edge positions, allowing continuous material removal and balanced cutting action. Which fastening hardware is required for the inserts? Inserts are secured with M3.5x8.5 Torx screws using a T10 Torx driver for reliable clamping. Can this cutter be used in standard milling holders? The 32 mm shank diameter and standard tooling interfaces make the cutter suitable for common milling spindles and holders used in CNC operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a stable 32 mm shank, compatibility with LNMU 0303 indexable inserts and a 150 mm overall length for reliable peripheral milling and extended reach. Order directly via Metav Werkzeuge or consult our specialists for technical guidance and availability. 32 mm Insert Milling Cutter for LNMU 0303 — L150 mm (Teknik Makina) The 32 mm Insert Milling Cutter for LNMU 0303 — L150 mm is an indexable cutter designed for industrial peripheral milling where rigidity and fast insert changes are essential 32 mm shank diameter for stable clamping Compatible with LNMU 0303 indexable inserts 150 mm overall length for deep reach Five cutting edges for increased productivity Torx T8 screw system M2.5x7 for quick insert changes Enhanced rigidity for consistent machining results The cutter from Teknik Makina combines a substantial 32 mm shank with a carefully balanced design to reduce vibration and improve surface quality during milling. A larger shank diameter increases clamping stability and torque transmission, which in turn reduces chatter in interrupted cuts. For operations that require repeatable dimensional accuracy, this tooling offers a dependable foundation that supports higher material-removal rates while maintaining process stability. Fast serviceability with standardised insert fixation Designed for indexable tooling workflows, the holder accepts LNMU 0303 inserts and uses a Torx fixation to speed up maintenance. The Torx T8 key and M2.5x7 screw arrangement permit rapid insert replacement and secure clamping without specialised fixtures. Indexable inserts offer a consistent cutting edge geometry and economical regrinding or replacement; consequently, tool changeover time is minimised and machine uptime is maximised, making the system well suited to batch production and diverse material runs. Reach and cutting capacity for practical workshop use With a 150 mm overall length and a 60 mm cutting length, the tool balances reach and rigidity for a range of peripheral and face milling tasks. The configuration of five cutting edges distributes cutting forces and can improve feed rates and tool life in many materials. The cutter’s mass (approx. 1.012 kg) contributes to steady cutting dynamics without creating excessive spindle load when set up on suitably rated holders. These dimensions support work on medium-duty milling applications where a combination of reach and mechanical stiffness is required. For robust, high-stability milling from Teknik Makina, contact Metav Werkzeuge for personalised supply and technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S687TM Manufacturer: Teknik Makina Product type: Milling cutter (insert) Core dimensions Diameter: 32 mm Shank diameter: 32 mm Overall length: 150 mm Cutting length: 60 mm Number of cutting edges: 5 Weight: 1.012 kg ECLASS: 21180806 Special features Compatible with LNMU 0303 indexable inserts Compatible insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x7 Label: 32mm Schaftfräser LNMU 0303 L150mm FAQ Which insert type does the cutter use? The cutter accepts LNMU 0303 indexable inserts; this standard insert type allows use of inserts from manufacturers such as Tungaloy with the S687TM holder. What shank and clamping dimensions are required? The tool is fitted with a 32 mm shank and is intended for holders that accommodate a 32 mm diameter — the robust shank size aids secure clamping and stable torque transmission. How long is the tool and what is the effective cutting length? Overall length is 150 mm with an effective cutting length of 60 mm, offering a compromise between reach and rigidity for peripheral milling tasks. How many cutting edges are provided and what is the benefit? The cutter is equipped with five cutting edges, which helps distribute cutting forces, increase feed capability and can extend the interval between indexings versus fewer-edge configurations. Which fasteners and keys are needed for insert changes? Insert retention uses a Torx T8 fastening system and M2.5x7 screws, enabling quick and repeatable insert replacement with standard workshop tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping, extended cutting length and indexable-insert flexibility to improve cycle stability and reduce downtime; order the tool directly via Metav Werkzeuge or consult the specialists for technical matching. Shank cutter S320TM — for ADKT 1505 indexable inserts, 32 mm shank (Teknik Makina) A robust Shank cutter S320TM designed for milling with ADKT 1505 indexable inserts, suited to medium and heavy-duty CNC milling where repeatable accuracy and fast insert changes are required Designed for ADKT 1505 indexable inserts 32 mm shank diameter for stable clamping 60 mm cutting length for deeper machining Compatible with ISCAR insert manufacturers High rigidity for consistent surface finish and tool life The combination of a 32 mm shank and a 200 mm overall length gives a stable connection between toolholder and spindle, minimising runout and vibration during interrupted cuts. Reduced chatter and improved stability translate directly into more consistent component geometries and extended insert life, making the tool suitable for batch production and demanding series work. The mass of 1.198 kg contributes to damping of cutting forces without compromising handling during tool change. Efficient material removal with indexable inserts Designed around the ADKT 1505 system, the cutter accepts standard indexable inserts that permit rapid replacement and consistent cutting geometry. The three‑edge configuration of 3 flutes ensures balanced cutting and reliable chip evacuation across a variety of materials, while the 60 mm cutting length enables deeper engagements where required. This design reduces machine idle time and supports a predictable cost-per-part calculation by separating the cutting edge from the carrier body. Practical fastening and service features for workshop use Retention is secured with an M4x10 Torx screw, driven by a T15 Torx key, enabling secure clamping of the insert seat and straightforward maintenance in the workshop environment. The standardised fastener type simplifies inventory and service operations, while the tool geometry permits straightforward insert indexing without complicated adjustments. Compatibility with major insert suppliers such as ISCAR helps to ensure availability of grades and geometries for specific materials. Suitable applications and operational benefits for production The tool is optimised for use in general CNC milling, toolroom jobs and industrial production where robustness and predictable behaviour are priorities. Typical applications include roughing and semi‑finishing in steels and general engineering alloys. The modular nature of the indexable system supports fast reconditioning of the cutting edge and keeps machine throughput high, which is especially valuable for subcontractors and in‑house production departments seeking stable, repeatable performance from a compact cutter by Teknik Makina Contact Metav Werkzeuge for procurement and technical advice on the Teknik Makina S320TM shank cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable insert grades and holder integration Technical data Article number: S320TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting length: 60 mm Number of cutting edges: 3 Overall length: 200 mm Weight: 1.198 kg Special features Compatible with ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key size T15 ECLASS: 21180806 ETIM: EC011860 FAQ What insert type does the tool accept? The cutter is designed for ADKT 1505 indexable inserts and is compatible with insert grades from ISCAR and other suppliers that match the ADKT 1505 specification. How many flutes does the cutter have and what is the benefit? The tool features 3 flutes, which provide balanced cutting forces and effective chip evacuation for improved surface finish and steadier machining. What are the critical dimensions to consider for holder selection? Key dimensions are the 32 mm shank diameter, the 60 mm cutting length and the 200 mm overall length; these determine rigidity and installation reach in the machine spindle. Which fasteners are required for insert clamping? Insert retention is secured with an M4x10 Torx screw; a T15 Torx key is used for installation and removal. Is the S320TM suitable for deep cutting applications? With a 60 mm cutting length and a robust shank, the S320TM is suitable for deeper engagements within the limits of machine rigidity and recommended insert geometry Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust clamp design and precise dimensions to ensure consistent grooving performance in serial turning tasks; the combination of a 25 mm shank and a 4 mm cutting width delivers repeatable results and stable mounting — order directly via Metav Werkzeuge or consult our specialists for application guidance. Grooving clamping holder K708TM — 25 mm shank, 4 mm cutting width (Teknik Makina) A Grooving clamping holder K708TM designed for precision grooving and parting operations with 4C indexable inserts in turning applications. 25 mm shank diameter for stable clamping 4 mm cutting width for precise grooving Compatible with ISCAR 4C indexable inserts 200 mm overall length for deep cuts Consistent clamping and machining accuracy for series production The K708TM toolholder is built around a 25 mm shank, which provides the rigidity required for repeatable grooving and parting operations. With a 4 mm cutting width and a cutting height of 35 mm, the holder is dimensioned to support predictable chip formation and maintain tool geometry under load. The design reduces vibration and permits stable cutting forces, which leads to fewer rejects in batch production and less frequent rework. Rigidity is delivered through solid construction and a secure clamping interface, so setup tolerance is minimised and process stability is enhanced. Broad compatibility reduces setup time and simplifies tooling Designed for use with 4C indexable inserts, the holder accepts cutting elements from leading manufacturers — notably ISCAR — allowing standardisation across tooling inventories. The mounting conforms to the S25R shank designation and is compatible with the 4C-R GRP holder rod configuration, enabling direct replacement in many established tool chains. This compatibility shortens changeover times and lowers tooling complexity, as the same insert types can be used for multiple part families. The result is a streamlined workflow and fewer tooling SKUs to manage. Workbench reach and operational benefits for everyday workshop use With a 200 mm overall length and a nominal diameter of 32 mm, the holder offers the reach needed for deeper grooving while maintaining control and balance; the unit’s mass of 0.81 kg supports controlled inertia without excessive overhang. The clamp geometry is optimised for repeatable seating of indexable inserts, which helps to extend insert life and reduce downtime related to repositioning. For maintenance-oriented workshops and production shops alike, the holder delivers a clear productivity advantage through reduced interruptions and consistent part quality. Secure workshop performance with Teknik Cutting Tools' K708TM — contact Metav Werkzeuge for tailored application advice and reliable dispatch from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K708TM Manufacturer: Teknik Makina Designation: Grooving clamping holder Compatible inserts: 4C Compatible insert manufacturer: ISCAR Holder rod designation: 4C-R GRP Mounting shank designation: S25R Core dimensions Shank diameter: 25 mm Cutting width: 4 mm Cutting height: 35 mm Diameter: 32 mm Overall length: 200 mm Weight: 0.81 kg Features & compatibility For indexable inserts: 4C Compatible with ISCAR inserts Holder rod: 4C-R GRP Mounting: S25R Application: grooving / parting operations FAQ Which insert types fit this clamping holder? The holder accepts 4C indexable inserts; the Grooving clamping holder K708TM is specifically prepared for these inserts and is compatible with ISCAR 4C variants. What are the key mounting specifications? Mounting follows the S25R shank designation and the holder is designed to be used with a 4C-R GRP holder rod; the K708TM therefore integrates with standard S25R setups. What cutting width and height are supported? The toolholder provides a 4 mm cutting width and 35 mm cutting height, dimensions that are suited to precision grooving and narrow slotting tasks. Is the holder suitable for deep grooving applications? With a 200 mm overall length and a 32 mm diameter, the K708TM offers sufficient reach for deeper grooves while maintaining stability and control during machining. How heavy is the unit and what does that mean in practice? The unit weighs 0.81 kg; this mass contributes to stable cutting dynamics without imposing excessive overhang, helping to maintain surface finish and tool life. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise parting and secure clamping with the robust grooving design, combining a 2 mm cutting width and a 25 mm shank for dependable in-process stability. Order the grooving clamp holder directly via Metav Werkzeuge or consult our experts for application support. Grooving clamp holder — 2 mm cutting width, 200 mm overall length (Teknik Makina) Grooving clamp holder from Teknik Makina for parting and grooving applications, designed to accept KGEVR‑KGMN 200 inserts and to mount on an S25R 2C bar with a 25 mm shank. *Solid clamp for stable insert retention *2 mm cutting width for narrow grooves *200 mm overall length for deep reach *Compatible with Korloy KGEVR‑KGMN 200 inserts Measurable cutting performance for repeatable results The grooving clamp holder (K662TM) is engineered for consistent parting and narrow‑groove machining: the 2 mm cutting width produces slim kerfs while the 45 mm cutting height supports deeper cuts where required. Designed around industrial norms, the holder accepts inserts in the KGEVR‑KGMN 200 family, which provides predictable chip control and surface finish. Specified dimensions and a clear interface to the bar system mean process planners can define cutting parameters with confidence, reducing trial time on production batches and supporting repeatable cycle times. Robust construction that reduces downtime Constructed for workshop use, the clamp‑style holder balances rigidity and serviceability. The 25 mm shank and 32 mm body diameter provide a stable interface with standard toolposts, while a mass of 0.802 kg contributes to vibration damping without excessive inertia. The clamping mechanism has been dimensioned to keep the insert firmly seated under cutting loads, which minimises rework and tool change interruptions. Quick, tool‑friendly insert seating shortens maintenance intervals and helps maintain throughput on multi‑shift operations. Clear compatibility and practical application scope Intended for parting and grooving operations on lathes, the holder mates with bars specified as S25R 2C and aligns with the ISO‑style insert pocket for KGEVR‑KGMN 200 inserts from Korloy. The 200 mm overall length gives reach for external and certain internal set‑ups, while the 2 mm groove capability is well suited to narrow slotting, profile separation and precision parting tasks. Documented dimensions and standardised mounting allow easy integration into existing tooling inventories, supporting efficient tool management and predictable replacement cycles. For tailored machining advice and to request a quotation for the Teknik Makina grooving clamp holder (SKU K662TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K662TM Manufacturer: Teknik Makina Facts Overall length: 200 mm Shank diameter: 25 mm Tool diameter: 32 mm Weight: 0.802 kg Special features Cutting width: 2 mm Cutting height: 45 mm Compatible inserts: KGEVR-KGMN 200 Suitable for inserts by: Korloy Bar designation: S25R 2C Holder designation: KGMN FAQ What inserts fit this holder? The holder is supplied for the KGEVR‑KGMN 200 insert family; Teknik Makina designed the groove pocket to accept Korloy KGEVR‑KGMN 200 inserts reliably. Which bar specification is required? This grooving toolholder is intended for bars with the S25R 2C designation, matching the 25 mm shank interface and ensuring correct seating. Can it be used for deep grooving tasks? With a 45 mm cutting height and 200 mm overall length, the K662TM is suitable for deeper grooving within the mechanical limits of the setup and insert used. Is the holder compatible with my lathe toolpost? Compatibility depends on the toolpost and clamping arrangement; the holder uses a 25 mm shank and a 32 mm body diameter which fit standard toolpost systems designed for such dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable clamp stability from the 32 mm shank combined with a 5 mm cutting width delivers consistent grooving and repeatable parting operations; the 50 mm cutting height supports deeper cuts where required. Order the grooving clamping holder directly via Metav Werkzeuge or request technical advice from our consultants. Grooving clamping holder K638TM – 32 mm shank, 5 mm cutting width (Teknik Makina) Grooving clamping holder K638TM is a lathe holder engineered for secure clamping of indexable inserts in narrow-grooving and parting tasks, suited to industrial turning and toolroom applications Robust 32 mm shank for stable mounting 5 mm cutting width for narrow grooving 50 mm cutting height for deep cuts 250 mm overall length, balanced weight 1.659 kg Stable mounting for consistent machining results The holder is built around a 32 mm shank with an ISO-style designation S32S, providing rigid support in the toolpost and reducing vibration during cut entry. That rigidity translates into more consistent surface finish and prolongs insert life by avoiding chatter. By combining a substantial shank with a balanced mass of 1.659 kg, the assembly resists deflection when performing interruptive cuts, which is particularly beneficial in high-precision turning and repeat production runs. Precision grooving where space is limited Designed for narrow grooving, the clamping arrangement accepts 5C indexable inserts, securing them for accurate cutting performance. The 5 mm cutting width is ideal for parting and thin-groove operations where material removal must be controlled; the 50 mm cutting height allows stable clamping of taller insert geometries and supports deeper engagement without compromising rigidity. For engineers specifying tooling for compact components, this holder offers a predictable tool geometry that simplifies process planning. Practical compatibility and straightforward setup Compatibility notes are clear: the holder’s designation 5C‑R S229 and the S32S shank match common turret and toolpost systems used in workshop turning centres. The 250 mm overall length gives ample reach for standard face or through‑centre applications without excessive overhang, reducing the need for frequent fixture changes. Where interchangeability matters, the defined interface supports quick replacement of worn holders and predictable repositioning, aiding production uptime and reducing setup variance. Contact Metav Werkzeuge today to discuss the Teknik Makina grooving clamping holder K638TM, its 32 mm shank and application options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K638TM Manufacturer: Teknik Makina Product: Grooving clamping holder Facts Shank diameter: 32 mm Overall length: 250 mm Cutting height: 50 mm Cutting width: 5 mm Weight: 1.659 kg Diameter: 41 Special features Accepts indexable inserts: 5C Shank designation ISO: S32S Holder designation: 5C-R S229 FAQ Is this holder compatible with standard 5C indexable inserts? The grooving clamping holder K638TM accepts 5C indexable inserts and is supplied with a holder designation matching common 5C insert formats. What shank size is required for mounting in the turret? The holder uses an S32S shank with a 32 mm diameter, designed for turrets and toolposts that accept ISO S32S tooling. How deep can the holder cut without loss of rigidity? With a 50 mm cutting height and a solid 32 mm shank, the holder is suited to deeper grooving than low‑profile holders; depth capability will also depend on machine rigidity and cutting parameters. Does the overall length affect tool overhang significantly? The 250 mm overall length provides useful reach for a range of turning operations while maintaining controlled overhang to limit deflection. Which holder designation should be specified when ordering replacements? Specify holder K638TM with designation 5C‑R S229 and shank S32S to ensure compatible replacements and consistent mounting geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a rigid 25 mm shank and a precise 5 mm cutting width delivers consistent groove geometry and reduced vibration across serial turning operations; the 200 mm overall length gives access for deeper parting tasks. Order the tool directly via Metav Werkzeuge or consult their advisors for application-specific guidance. Grooving clamp holder K730TM — 5 mm cutting width, 25 mm shank (Teknik Makina) A grooving clamp holder engineered for 5C indexable inserts, intended for precise grooving and parting on lathes in industrial workshop environments 5 mm cutting width for fine grooves 25 mm shank for stable clamping Compatible with 5C indexable inserts 200 mm overall length for deeper cuts Stable set-up for repeatable grooving A robust design with a 25 mm shank and a 32 mm tool body provides the rigidity required for repeatable grooving operations. Reduced deflection during engagement lowers the risk of chatter and improves surface finish, which in turn extends insert life and reduces rework. The relatively light mass (approx. 0.785 kg) balances inertia and responsiveness, supporting stable cutting at moderate spindle speeds while maintaining positional accuracy during parting and slotting operations. Precise cut control and predictable chip formation With a 5 mm cutting width and 40 mm cutting height, the holder is dimensioned to accept standard narrow grooving inserts and to generate clean chip flow in interrupted cuts. Compatibility with 5C inserts and established insert geometries simplifies tooling decisions and shortens set-up times. Indexable insert systems concentrate wear on small, replaceable parts; the holder’s geometry keeps the insert seat square and axial, so cutting parameters translate directly into consistent groove width and depth. Straightforward integration into existing tool kits The holder accepts bar designations such as S25S and corresponds with mounting references like 5C-R-123 SDV, enabling easy replacement within existing tool carriers. An overall length of 200 mm offers reach for deeper profiles, while the external diameter of 32 mm matches common turret clearances. The item is identified as K730TM and is designed for use with Sandvik-type inserts; when integrating the holder into production setups, check turret clearance and ensure clamping screws are torqued to specification to preserve repeatability. For procurement or tailored process advice on Teknik Cutting Tools components, contact Metav Werkzeuge in Emmerich for expert support and secure supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: K730TM Manufacturer: Teknik Makina Compatible insert manufacturer: Sandvik Insert size: 5C Facts Shank diameter: 25 mm Overall length: 200 mm Tool diameter: 32 mm Cutting height: 40 mm Cutting width: 5 mm Weight: 0.785 kg Special features Mounting designation: S25S Holder designation: 5C-R-123 SDV SKU: K730TM FAQ Which insert types fit this holder? The grooving clamp holder accepts 5C indexable inserts and is specified as compatible with Sandvik insert geometries for standard grooving and parting tasks. What is the required shank diameter on the tool post? A 25 mm shank is required; the holder’s 25 mm shank ensures secure clamping and minimal run-out. How wide a groove can be machined with this holder? The holder is designed for a 5 mm cutting width with a cutting height of 40 mm, suitable for narrow grooves and parting operations. Is the K730TM suitable for deeper parting operations? The 200 mm overall length gives extended reach for deeper profiles, but stability depends on turret overhang and clamping rigidity. Which mounting designations identify this holder? The holder corresponds to bar designation S25S and holder reference 5C-R-123 SDV, facilitating replacement and compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise compatibility, rigid clamping and compact dimensions for reliable grooving and parting operations; order the parting clamp holder directly via Metav Werkzeuge or ask our consultants if needed Parting clamp holder K618TM – parting and grooving toolholder, 25 mm shank, 5 mm cutting width (Teknik Makina) A robust parting clamp holder K618TM engineered for precision grooving and parting with indexable 5C MGM inserts, suitable for production and workshop lathes Compatible with Korloy 5C MGM inserts 25 mm shank diameter for rigid clamping 5 mm cutting width for narrow grooves 200 mm overall length for extended reach Consistent groove quality through defined compatibility The clamp-style holder is designed around industry-standard insert geometries and ISO shank references, ensuring predictable results in series production. With a 25 mm shank and an ISO designation of S25R 5C-R, the holder delivers a stable interface to the turret or toolpost, reducing deflection under load. Compatibility with 5C MGM indexable inserts — and specific support for Korloy grades — simplifies procurement and makes tool changes straightforward. For operators less familiar with insert codes: 5C MGM describes the insert form and clamping family used in narrow-grooving and parting tasks, allowing easy matching of insert geometry to groove width and material. Rigid clamping for longer tool life and better finishes A purposeful clamping mechanism and conservative cutter geometry improve stability during cut entry and exit, which reduces vibration and improves surface finish. The 40 mm cutting height paired with a 5 mm cutting width offers a balanced profile for controlled chip formation on typical turning operations. The toolholder’s mass distribution and a total length of 200 mm overall provide the reach required for deeper operations while maintaining stiffness. These design choices translate into longer insert life, fewer reworks and more consistent cycle times on production runs. Practical applications and straightforward maintenance The holder is intended for precision grooving and parting tasks on conventional and CNC lathes where narrow slots or part-off operations are required. Typical uses include component separation, internal slotting preparations and producing narrow grooves for rings or seals. Routine maintenance consists of checking clamp torque and insert seating; the clamp design permits quick insert replacement without special tooling. The combination of Korloy-compatible inserts and the holder’s standard shank sizing makes it a practical fit for mixed workbenches and machining centres where flexibility and repeatability are priorities For tailored advice on integrating the Teknik Makina K618TM into production workflows, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, practical guidance and supply options Technical data SKU: K618TM Manufacturer: Teknik Makina Type: parting clamp holder Suitable inserts: 5C MGM Suitable insert manufacturer: Korloy Shank designation: S25R 5C-R Alternative holder designation: MGM Numbers Shank diameter: 25 mm Cutting height: 40 mm Cutting width: 5 mm Overall length: 200 mm Diameter: 32 mm Weight: 0.777 kg Special features Application: grooving and parting Clamping system: clamp-type holder Insert family: 5C MGM compatible Manufacturer reference: Teknik Makina SKU reference: K618TM FAQ What insert types fit this holder? The holder is designed for 5C MGM indexable inserts; Korloy grades labelled for 5C MGM will fit the clamping arrangement used in the K618TM. What shank size is required for mounting? Mounting requires a toolpost or turret accepting a 25 mm shank; the K618TM uses the S25R 5C-R designation for standardisation. Can it be used for deep grooving applications? The 200 mm overall length provides reach for deeper operations while maintaining stiffness, provided the machine setup supports the extended overhang. How does the clamp design affect performance? The clamp-style retention reduces insert movement under load, improving surface finish and tool life by limiting vibration during engagement and parting cuts. Is the holder suitable for CNC and manual lathes? Yes; the robust shank and standard insert family make the holder suitable for both CNC machining centres and conventional lathes where narrow grooves or parting cuts are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision‑focused design that combines a 25 mm shank, 4 mm cutting width and robust clamping for reliable parting and grooving. Benefit from compatibility with Korloy KGEVR‑KGMN 400 inserts and practical dimensions that support efficient lathe changeovers. Order directly via Metav Werkzeuge or consult our specialists for application advice Parting and Grooving Clamp Holder (Stechklemmhalter) K667TM — 25 mm shank · 4 mm cutting width Parting and Grooving Clamp Holder (Stechklemmhalter) K667TM designed for secure clamping of grooving and parting inserts, intended for production lathes and workshop turning operations 25 mm shank diameter 4 mm cutting width 45 mm cutting height 200 mm overall length Compatible with Korloy KGEVR‑KGMN 400 inserts Stable clamping for repeatable cuts The holder delivers consistent results through a rigid clamping concept that reduces chatter and tool deflection. The clamp mechanism secures the insert firmly, allowing repeatable parting and grooving cycles with minimal rework. With a 45 mm cutting height and a 4 mm cutting width, the tool is dimensioned to support precise depth control and narrow slotting, which helps maintain tolerance bands in serial production. The compact mass of 0.796 kg further contributes to stable dynamics at cutting speeds commonly used in turning centres. Designed for fast setup and compatibility Reduced setup time is achieved by adherence to standard shank and insert interfaces. The holder accepts a 25 mm shank with ISO designation S25R 4C, enabling straightforward mounting in conventional tool posts and turret systems. Compatibility with Korloy KGEVR‑KGMN 400 inserts simplifies procurement and interchangeability, while the KGMN holder interface ensures the insert seats reliably. These characteristics translate into shorter machine downtime and a streamlined tooling stock strategy. Built for production environments With an overall length of 200 mm and a 32 mm diameter reference, the component is balanced for use on medium and larger lathes where access and reach matter. The geometry supports clean chip flow during parting and narrow‑groove operations, helping to avoid packing and thermal build‑up that can affect surface finish. The holder’s proportions make it suitable for repeated cycles in batch production, delivering a dependable combination of accessibility and cutting stability. Practical handling and maintenance Routine handling is simplified by the clear interface and robust construction. The holder’s KGMN designation corresponds to common clamping systems, which eases replacement and inspection procedures. Regular checks of insert seating and clamping screw torque are recommended to maintain the original cutting performance. When replacing inserts, the compatibility with Korloy grooving types reduces searching time for suitable grades and chipbreaker geometries. For tailored technical advice or to secure supply of the Teknik Cutting Tools parting and grooving clamp holder K667TM, contact Metav Werkzeuge in Emmerich for a detailed recommendation and rapid delivery Technical data Article number: K667TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Facts Shank diameter: 25 mm Cutting width: 4 mm Cutting height: 45 mm Overall length: 200 mm Diameter: 32 mm Weight: 0.796 kg Compatibility & features Compatible with Korloy KGEVR‑KGMN 400 inserts Shank designation: S25R 4C Holder designation: KGMN Intended for parting and grooving operations SKU: K667TM FAQ Which inserts fit this clamp holder? The clamp holder accepts Korloy KGEVR‑KGMN 400 inserts; the seat and clamping geometry are matched to that insert family for reliable seating and repeatability. What is the shank size and designation? The tool has a 25 mm shank with ISO designation S25R 4C, making it compatible with standard 25 mm tool posts and turrets. What are the key dimensional limits for mounting? Relevant dimensions are 200 mm overall length, 32 mm diameter and a 25 mm shank diameter; these should be checked against the machine’s toolholder and clearance envelope. Is the holder suitable for high‑volume production? Yes, the holder’s rigid clamping and compact mass of 0.796 kg support stable cutting conditions and repeatable parting and grooving in batch production. Which parting or grooving widths can be achieved? The holder is configured for a 4 mm cutting width; different insert geometries within the compatible Korloy range allow adaptation of groove form and finishing requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a stable, purpose-built design combined with insert compatibility and compact dimensions for reliable internal turning operations; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. K213TM Boring Bar – S25R SVUCR holder for VCMT 1604, right-hand, 200 mm (Teknik Makina) A K213TM Boring Bar engineered for precise internal turning using VCMT 1604 indexable inserts in right-hand machining applications. Right-hand cutting for accurate turning Compatible with VCMT 1604 indexable inserts Shank Ø 25 mm, overall length 200 mm Rigidity and repeatability for production environments The S25R SVUCR holder is designed to deliver rigidity where it matters: a robust shank with Ø 25 mm and a balanced overall length of 200 mm minimise vibration and deflection during internal turning. This improves dimensional repeatability and surface finish when paired with VCMT 1604 insert geometry. For production teams and job-shop settings, the clear mechanical advantage is fewer reworks and more consistent cycle times, supported by the holder’s optimised mass distribution and a modest weight of 0.771 kg that eases spindle load calculations. Chip control and cutting geometry that boosts efficiency With a cutting angle of 93° and a cutting height of 40 mm, the toolholder is tuned for effective chip formation and evacuation when used in conventional right-hand operations. The compatibility with indexable inserts allows quick insert changes and flexible grade selection for varying workpiece materials, improving uptime and reducing tooling costs. Explained simply: the insert system lets teams switch between tougher or finer grades without changing the tool shank, maintaining process stability and maximising tool life under varying cutting conditions. Compact dimensions with straightforward machine integration A nominal tool diameter of 32 mm and the defined interface make installation and clamping predictable on most milling and turning heads adapted for boring bars. The ISO-style designation S25R SVUCR indicates the shank form and clamping orientation, which supports straightforward planning for fixtures and holders. The compact footprint and known mass facilitate dynamic balancing and reduce the need for extensive countermeasures on medium-duty spindles, helping engineering teams to integrate the tool quickly into existing setups. Proven supplier network and practical procurement benefits Supplied by Teknik Makina and offered through Metav’s distribution, the tool benefits from a supply chain focused on availability and traceability. Metav’s position as a precision partner for workshops and industry ensures procurement is backed by stock visibility and technical guidance, reflecting decades of service and a large European customer base. For planners and buyers this means access to consistent quality and support in choosing the correct insert grade and cutting data for the intended application. For procurement or technical consultation on the Teknik Makina K213TM S25R SVUCR boring bar — particularly regarding compatibility with VCMT 1604 inserts and right-hand machining setups — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply from Emmerich. Technical data SKU: K213TM Manufacturer: Teknik Makina Description: SVUC for VCMT Indexable Inserts ISO designation: S25R SVUCR Facts Shank diameter: 25 mm Cutting height: 40 mm Tool diameter: 32 mm Overall length: 200 mm Weight: 0.771 kg Cutting angle: 93° Cutting direction: right-hand Special features Compatible with VCMT 1604 indexable inserts ISO-style holder for secure clamping Designed for internal turning with inserts Tekni k Makina product SKU K213TM FAQ Which insert size fits this boring bar best? The K213TM is specified for VCMT 1604 indexable inserts; this insert size matches the clamping geometry of the S25R SVUCR holder. Is the holder for right-hand or left-hand cutting? The toolholder is configured for right-hand cutting, suited to standard right-hand internal turning operations. What are the key dimensions for machine setup? Key dimensions: shank Ø 25 mm, tool diameter 32 mm, overall length 200 mm and cutting height 40 mm — use these values for fixture and spindle clearance checks. Can the boring bar be used in light-duty milling heads? Provided the milling head supports an S25R-style shank and the spindle speed/torque match the operation, the K213TM can be integrated into light- to medium-duty setups where insert-based boring is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 45° cutting geometry, compatibility with SPMG 0904 indexable inserts and a 25 mm shank for stable, repeatable T-slot machining — a compact solution for production and workshop use. Order the T-slot milling cutter directly via Metav Werkzeuge or ask our consultants if needed. T-slot milling cutter – 32 mm diameter, 45° cutting angle (Teknik Makina) T-slot milling cutter for machining precise T-slots and grooves in industrial fixtures and machine tables 45° cutting angle for precise T-slots Accepts SPMG 0904 indexable inserts 25 mm shank for rigid clamping 32 mm diameter, 2 cutting edges Precision slotting with indexable inserts for consistent results The T-slot milling cutter combines a defined 45° cutting angle with compatibility for SPMG 0904 indexable inserts, delivering consistent slot geometry across series production. Using replaceable inserts reduces downtime compared with solid cutters: worn cutting edges are exchanged quickly, restoring original performance without regrinding. The insert system also enables controlled chip formation and predictable tool life, which supports higher throughput and reliable cycle-time planning in CNC and conventional machining environments. Rigid tool body and secure fixation for improved surface quality A substantial 25 mm shank and a 32 mm cutter diameter give the tool the stiffness required for stable operation, while the overall length of 150 mm and a 30 mm cutting length provide an accessible working envelope for typical T-slot depths. The cutter is secured with an M3.5x8.5 Torx screw tightened with a T15 key, ensuring repeatable clamping of the insert pocket. Reduced vibration from the rigid design improves surface finish and extends insert life, which contributes to lower per-part costs and fewer secondary operations. System compatibility designed for workshop productivity Designed to accept inserts from established manufacturers — notably Taegutec — the cutter integrates easily into existing tooling kits and spare-part strategies. With 2 cutting edges and a balanced geometry, the tool is suitable for repetitive T-slot production where uniformity is essential for assembly and fixture alignment. If additional technical details are required to match specific machines or workpieces, advisory support is available; Metav Werkzeuge combines broad stock depth with decades of metrology and tooling expertise to help select the right tool combination for the job. For reliable T-slot machining choose the Teknik Makina T-slot milling cutter — contact Metav Werkzeuge in Emmerich for specific application advice or spare-part guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S060TM Manufacturer: Teknik Makina Designation: T-slot milling cutter Facts Diameter: 32 mm Shank diameter: 25 mm Cutting length: 30 mm Overall length: 150 mm Number of cutting edges: 2 Cutting angle: 45° Weight: 0.589 kg Special features Suitable for insert: SPMG 0904 Compatible insert manufacturer: Taegutec Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which inserts fit the cutter best? The cutter accepts SPMG 0904 indexable inserts; Taegutec inserts in this designation are compatible with the Teknik Makina T-slot milling cutter (SKU S060TM). How is the insert secured and which key is required? Inserts are secured with an M3.5x8.5 Torx screw; use a T15 key to achieve the specified clamping. What shank diameter is required for the holder? The cutter has a 25 mm shank, so machine holders or collets must accommodate a 25 mm shank diameter for secure clamping. Can the cutter be used on different machines? Yes — the tool is suitable for CNC milling machines and conventional mills where a 32 mm diameter T-slot cutter is required; machine spindle capability and holder rigidity should be checked to match speeds and feeds. How many cutting edges does the tool have and what is the benefit? The tool features 2 cutting edges, providing a predictable chip load and simplified insert replacement, which helps maintain consistent slot geometry over production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 32 mm cutting diameter with internal coolant and compatibility with TCMT 16T3 indexable inserts delivers efficient chip control and consistent T-slot geometry; this improves uptime and reduces tool changes. Order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific guidance. T-slot cutter for TCMT 16T3 — 32 mm, internal coolant (Teknik Makina) A T-slot cutter for TCMT 16T3 indexable inserts, engineered for precise T-slot machining in fixtures and workholding applications. 32 mm diameter for precise T-slots Internal coolant for improved chip evacuation Compatible with TCMT 16T3 indexable inserts 25 mm shank for stable clamping Enhanced cutting performance for precise T-slots The T-slot cutter TKC170TM combines a 32 mm diameter with a 25 mm shank and a 55° cutting angle to deliver stable, repeatable T-slot profiles. Two well-balanced cutting edges ensure even load distribution and reduced vibration, which supports consistent surface finish and dimensional fidelity. The design concentrates on material removal efficiency and process reliability, making it suitable for repetitive fixture work where tolerance adherence is essential. Optimised coolant routing reduces thermal load and wear Equipped with internal coolant, the tool channels coolant directly to the cutting zone to aid chip evacuation and reduce heat generation at the insert edge. This targeted cooling helps maintain cutting edge integrity and prolong tool life, particularly in continuous or high-feed operations. For workshops seeking measurable improvements in machining stability, the coolant routing translates into fewer unplanned stops and a steadier production flow. Secure insert clamping and straightforward service for fast changeovers Insert retention uses a T15 Torx key and an M3.5x8.5 fastening screw to secure TCMT 16T3 inserts reliably. The cutter’s 150 mm overall length and 50 mm cutting length provide sufficient reach while remaining compact enough for rigid clamping. Maintenance and insert replacement are straightforward, minimising downtime during routine service. Clear mechanical fixation supports repeatable seating and consistent cutting conditions. Purpose-built for fixtures, jigs and repetitive milling tasks At a manageable weight of 0.508 kg, the body balances rigidity with handling convenience, making the tool suitable for both production and repair tasks in workshop environments. With 2 cutting edges, the cutter offers a compromise between efficient chip removal and economical insert usage. Technical advice is available for adapting cutting parameters to specific materials and setups, ensuring the cutter delivers dependable results in regular T-slot milling operations. For reliable T-slot machining choose the Teknik Makina T-slot cutter TKC170TM and contact Metav Werkzeuge for tailored advice and fast delivery; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC170TM Manufacturer: Teknik Makina Product type: T-slot cutter Numbers / Core technical data Diameter: 32 mm Overall length: 150 mm Weight: 0.508 kg Shank diameter: 25 mm Cutting length: 50 mm Cutting edges: 2 Cutting angle: 55° Special features Internal coolant For TCMT 16T3 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 eClass: 21180605 FAQ Which indexable inserts fit this cutter? The cutter is designed for TCMT 16T3 indexable inserts; TKC170TM accepts the TCMT 16T3 geometry for secure seating and efficient cutting. Does the cutter provide internal coolant? Yes, the TKC170TM features internal coolant, routed to the cutting zone to aid chip evacuation and reduce thermal load. What shank size is required for the holder? A 25 mm shank is specified for this cutter; ensure the toolholder accepts a 25 mm shank for proper clamping. How are inserts fastened to the cutter? Inserts are retained with a T15 Torx key and an M3.5x8.5 screw, providing secure and repeatable clamping for TCMT 16T3 inserts. What length and reach does the cutter offer? The tool has a 150 mm overall length with a 50 mm cutting length, offering good reach for typical fixture and workholding tasks. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precision T‑slot cutter that combines replaceable CCMT indexable inserts, a robust 20 mm shank and a compact overall length for efficient setup and consistent production results; order directly via Metav Werkzeuge or ask our consultants for machining recommendations. T-Nut Cutter TKC102TM by Teknik Makina — 32 mm diameter, for indexable CCMT 0602 inserts The T-Nut Cutter TKC102TM is designed for accurate T‑slot machining on CNC milling machines and modular fixtures, offering a replaceable‑insert concept for economical series production. T-slot cutter »TKC102TM« by Teknik Makina Compatible with CCMT 0602 indexable inserts 32 mm cutting diameter, 4 flutes 20 mm shank diameter for secure clamping Consistent production from replaceable indexable inserts The replaceable indexable inserts system is the core benefit of this tool: CCMT 0602 inserts are used, so wear is managed by logistically simple plate changes rather than full‑tool replacement, reducing downtime and consumable costs. The insert geometry is chosen to deliver a precision slot profile with minimal vibration; users unfamiliar with indexable tooling will find that changing a seat of inserts is significantly quicker than re‑grinding solid cutters. This approach keeps tolerances stable across batches and makes surface finish reproducible without complex re‑setting procedures. Stable clamping and geometry for higher feed rates A 20 mm shank ensures secure clamping in standard holders and collets, improving concentricity and reducing runout during high‑feed operations. The body features 4 flutes matched to a 32 mm external diameter and a 40 mm cutting length, which together balance chip evacuation and engagement length to permit elevated material removal rates while maintaining tool life. The cutter’s 12 mm effective cutting height is engineered to suit typical T‑slot profiles; this geometry reduces deflection and allows for steady surface quality, which is particularly advantageous when machining longer runs or harder alloys. Quick insert changes and workshop practicality Assembly and maintenance are simplified: the insert is secured with a Torx screw M2.5x3.5 and standard Torx key T8, enabling fast, repeatable insert replacement without specialised tooling. The tool’s overall length of 100 mm and light weight (0.3 kg) make it straightforward to handle during set‑up and inspection. Supplied as an indexable cutter compatible with CCMT plates, the design supports predictable service life budgeting and straightforward inventory management — an attractive operational advantage for busy production shops and contract manufacturers alike. Contact Metav Werkzeuge today for tailored machining guidance or to arrange procurement of the Teknik Cutting Tools T‑slot cutter — expert advice and reliable supply direct from Emmerich. Technical Data Article number: TKC102TM Manufacturer: Teknik Cutting Tools Type: T-slot cutter Facts Diameter: 32 mm Number of flutes: 4 Overall length: 100 mm Shank diameter: 20 mm Cutting length: 40 mm Cutting height: 12 mm Weight: 0.3 kg Special features Compatible with CCMT 0602 indexable inserts Torx screw M2.5x3.5 for insert clamping Torx key size T8 Designed for CNC milling and fixture slotting FAQ How are inserts secured on this cutter? Insertion plates are fixed with a Torx screw M2.5x3.5; a T8 key is used for tightening and replacement on the TKC102TM. Which insert type is required for replacement? Replacement requires CCMT 0602 indexable inserts, chosen for their economy and repeatable cutting geometry in T‑slot profiles. What clamping size is recommended for stable operation? A 20 mm shank provides secure clamping in standard holders and collets, improving runout and enabling higher feed rates. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust machining performance with straightforward tool integration: the 32 mm cutting diameter, secure M12 thread and compatibility with Korloy indexable inserts deliver reliable T-slot production and predictable cycle times. Order directly via Metav Werkzeuge or consult our specialists for specification support. T-slot cutter TKC266TM — 32 mm diameter, 65 mm overall length | Teknik Makina A T-slot cutter designed for precise machining of T-slots and grooves in production and workshop environments, suitable for use with indexable inserts. 32 mm cutting diameter 65 mm overall length Three cutting edges for smooth cuts Compatible with Korloy indexable inserts Consistent T-slot results for repetitive production The cutter achieves repeatable groove geometry thanks to its 32 mm diameter and three cutting edges, which distribute cutting forces and reduce vibration. The defined 2 mm cutting edge height supports stable insert seating and predictable chip flow, helping to maintain slot dimensions throughout long runs. This configuration reduces the need for rework and supports consistent part quality in serial milling tasks. Secure mounting and easy machine integration A robust M12 thread together with an 18 mm shank provides a compact, secure connection to the toolholder, assisting reliable torque transfer during plunge and slotting operations. The relatively light mass (0.108 kg) simplifies handling and tool changes while keeping spindle load modest. These features make integration into existing setups straightforward and minimise downtime during insert replacement or tool swaps. Practical compatibility and workshop benefits Designed for use with Korloy inserts, the cutter streamlines tooling logistics by using widely available indexable grades. The model is supplied under the designation TKC266TM by Teknik Makina, offering an industrial-grade option for workshops seeking repeatable T-slot machining without complex tool preparation. The compact overall length of 65 mm supports access in constrained fixtures while preserving rigidity for accurate slot profiles. For procurement or specification advice on Teknik Makina T-slot cutters such as the TKC266TM, contact Metav Werkzeuge for delivery options and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TKC266TM Product type: T-slot cutter Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 32 mm Overall length: 65 mm Shank diameter: 18 mm Cutting edges: 3 Cutting edge height: 2 mm Thread: M12 Weight: 0.108 kg Special features / Compatibility Compatible with Korloy indexable inserts Label: 32 mm T-slot cutter L65 mm SKU: TKC266TM FAQ What is the cutting diameter of this T-slot cutter? The cutting diameter is 32 mm; the TKC266TM is specified for T-slot machining with a 65 mm overall length. Which inserts fit this cutter? This cutter is compatible with Korloy indexable inserts for straightforward insert replacement. How is the cutter mounted to the toolholder? The design uses an M12 thread and an 18 mm shank to secure the cutter for machining operations. How many cutting edges does it have and what is their height? The tool features three cutting edges with a cutting edge height of 2 mm. Who manufactures this cutter? The cutter is manufactured by Teknik Makina and sold under the SKU TKC266TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable drilling solution that combines a 32 mm diameter with a 96 mm cutting length for efficient holemaking and reduced tool changes; order directly via Metav Werkzeuge or contact the consultants for tailored technical advice. Vollbohrer — indexable drill, 32 mm diameter, 96 mm cutting length (Teknik Makina) Vollbohrer is an indexable drill body designed for precision holemaking with replaceable Korloy inserts, suitable for industrial production and workshop use. Indexable design for efficient tool life 32 mm diameter for larger bore applications 96 mm cutting length for deep hole capability Compatible with Korloy WCM-06T3 inserts Higher throughput through optimised drilling geometry The indexable drill body is engineered to deliver consistent material removal with reduced cycle times. With a 32 mm diameter and a 96 mm cutting length, the tool minimises the need for intermediate retractions during drilling, which supports faster feeds and steady penetration rates. The solid shank and balanced mass distribution, combined with a secure clamping interface, ensure the machining process remains stable; this translates into fewer rejects and a measurable productivity gain on production runs. Accurate hole quality and predictable repeatability Precision is achieved through a rigid body and repeatable insert seating. The design accepts Korloy WCM-06T3 indexable inserts, which are held in a defined seat to preserve cutting geometry from one index to the next. This repeatability reduces the variance between holes and aids in maintaining tolerance chains on assemblies. For engineers considering process capability, the result is a more predictable output and simplified inspection routines. Maintenance-friendly concept that shortens downtime Tool upkeep is simplified: when a cutting edge reaches wear limits, only the insert requires replacement rather than the entire drill body. The measured 58 mm shank length and 188 mm overall length allow for clear access during insert changes and reconditioning. This modular approach lowers consumable cost per hole and shortens machine downtime, improving overall equipment effectiveness in busy shops where tool change frequency directly impacts throughput. Integration into production and workshop workflows The drill body is supplied as an indexable system compatible with inserts from Korloy, providing flexibility for shops that standardise on that supplier. With a mass of 0.921 kg, the component balances robustness and handling ease for set-up operations. Its configuration supports applications where replaceable-cutting-edge solutions are preferred over solid-carbide drills for cost efficiency and faster return to service after wear events. Contact Metav Werkzeuge for specific process recommendations or to reserve the Teknik Makina indexable drill U174TM — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: U174TM Manufacturer: Teknik Makina Name: Vollbohrer Facts Diameter: 32 mm Shank diameter: 32 mm Cutting length: 96 mm Shank length: 58 mm Overall length: 188 mm Weight: 0.921 kg Compatible insert manufacturer: Korloy Compatible insert type: WCM-06T3 Special features Indexable design for replaceable inserts Insert seat for Korloy WCM-06T3 Robust drill body for stable machining Modular maintenance concept FAQ What insert type does the drill accept? The drill accepts Korloy WCM-06T3 indexable inserts; the seating is designed for secure, repeatable clamping of these inserts. Is the shank size suitable for standard toolholders? The shank diameter is 32 mm, compatible with holders sized for a 32 mm shank; refer to toolholder specifications for fitment. How deep can this drill cut effectively? The effective cutting length is 96 mm, providing the capacity for deeper holes within the drill’s overall stability limits. What is the overall length and mass of the tool? The overall length is 188 mm and the mass is 0.921 kg, offering a balance between rigidity and handling during set-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping with a 25 mm shank, precise compatibility with CNMG 1204 inserts and a compact 250 mm overall length for reliable left‑hand turning operations; order the P350TM directly via Metav Werkzeuge or consult the technical team for application advice. P350TM S25S PCLNL Boring Bar – PCLN for CNMG Inserts, 25 mm Shank (Left‑hand) by Teknik Makina The P350TM is a left‑hand PCLN‑style boring bar designed for secure indexable‑insert turning with CNMG 1204 inserts, offering a compact 250 mm overall length for stable lathe work Left‑hand cutting orientation 25 mm shank diameter for stable clamping Compatible with CNMG 1204 inserts No internal coolant for dry machining Consistent rigidity for repeatable turning The tool provides stable machining through its 25 mm shank and a balanced body with a 250 mm overall length, which together reduce vibration and deflection during engagement. That structural stability supports predictable tool life and consistent surface finish, allowing for higher feed rates where the process permits. The specified 32 mm diameter and the measured weight (0.978 kg) reflect a compact, easy‑to‑mount design that still delivers the torsional stiffness expected in industrial turning tasks. For purchasers assessing fixture requirements, the clear numerical values enable straightforward planning of toolholders and machine set‑up. Optimised insert pairing and predictable cutting geometry Engineered for use with CNMG 1204 indexable inserts in a PCLN pocket, this boring bar accepts the widely available turning grades used across general engineering and subcontract machining. The 95° cutting angle and a cutting height of 50 mm ensure the insert seat aligns reliably with common insert geometries, simplifying insert selection and reducing set‑up time. The left‑hand orientation is suitable for specific turning directions and applications where reverse cutting is required; in addition, the no internal coolant configuration is intended for operations using external coolant or dry machining strategies, which can be beneficial when internal channels are a contamination or maintenance concern. Built for workshop integration and efficient servicing The modular concept — replaceable CNMG inserts and a standard S25S PCLNL mounting style — reduces downtime and keeps maintenance straightforward: worn cutters are changed rather than the whole bar. That approach supports a cost‑effective production flow and aligns with Metav’s focus on supplying accessible precision for workshops of all sizes. Technical decisions such as clamping designation 12, the left‑hand cut type and the absence of internal coolant mean the bar integrates well into existing tool inventories while meeting requirements for repeatable part quality. For specification clarifications or to confirm suitability for a particular material or machining strategy, the sales engineers at Metav Werkzeuge are available to provide detailed comparisons and recommendations. Contact Metav Werkzeuge to discuss the Tek­nik Makina P350TM boring bar, confirm compatibility with specific CNMG grades and arrange supply directly from the Emmerich stock. Technical Data Article number: P350TM Manufacturer: Teknik Makina ISO designation: S25S PCLNL Model type: PCLN for CNMG Indexable Inserts Facts Shank diameter: 25 mm Overall length: 250 mm Diameter: 32 Cutting height: 50 mm Weight: 0.978 kg Cutting angle: 95° Insert type: CNMG 1204 Cutting direction: left Special feature: without Coolant Special features Compatible with CNMG 1204 inserts PCLN insert pocket geometry Left‑hand cutting orientation No internal coolant Clamping designation: 12 FAQ Which insert type fits this boring bar? The P350TM accepts CNMG 1204 indexable inserts in a PCLN pocket; Teknik Makina designed the seat and cutting height to match that insert size for reliable seating and repeatable results. Is this a left‑hand or right‑hand tool? This boring bar is a left‑hand tool, intended for machining operations that require left‑hand cutting direction; check machine spindle rotation and part set‑up before selection. Can internal coolant be used with this bar? The bar is supplied without internal coolant; it is suitable for dry machining or for use with external coolant supply systems rather than through‑tool cooling. What are the key dimensions to check for toolholder compatibility? Important values are the 25 mm shank diameter, 250 mm overall length, 32 mm diameter and cutting height 50 mm; these figures help determine holder fit and clearance on the lathe. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com