Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a tool that combines deep-hole capability, secure clamping and simplified servicing: the design delivers Ø 34 mm drilling with a 170 mm cutting length and a robust 32 mm shank for stable machining. Order the Indexable Insert Drill directly via Metav Werkzeuge or ask our consultants if needed. Indexable Insert Drill U794TM (Teknik Makina) — Ø 34 mm, 170 mm cutting length The Indexable Insert Drill U794TM is an industrial insert drill designed for stable, long-reach holemaking in demanding production environments, compatible with standard indexable inserts for efficient tool replacement. 32 mm shank for robust clamping 170 mm cutting length for deep drilling Ø 34 mm nominal diameter Compatible with Korloy WCM-06T3 inserts Deliver consistent deep-hole performance and machine uptime The indexable insert drill concept allows for sustained production with predictable results: the Ø 34 mm nominal diameter and 170 mm cutting length make the tool well suited to medium-deep holemaking where repetition and repeatability matter. A 32 mm shank increases rigidity in the spindle, reducing vibration and improving hole quality without elaborate setup changes. This combination of dimensions supports stable concentricity and helps maintain cycle-time consistency on machining centres. Reduce tooling costs and downtime through replaceable inserts Carrying replaceable inserts means machining costs are governed by insert life rather than entire tool replacement. Compatibility with Korloy WCM-06T3 inserts permits rapid index changes at the tool setter, shortening downtime and simplifying spare-part inventories. The insert-based approach encourages a cost-effective maintenance routine: worn cutting edges are exchanged quickly, machining resumes with minimal interruption and overall tooling expenditure is reduced. Engineered for integration with production tooling systems Designed by Teknik Makina, this indexable option balances tool length and handling: the overall length and shank proportions ease tool change procedures while the mass (1.191 kg) contributes to mechanical stability when cutting. The tool’s geometry supports standard clamping systems and straightforward programming for CNC cycles, helping to integrate the drill into existing workflows. For workshops seeking reliable supply and consistent quality, Metav Werkzeuge provides direct distribution and product guidance from its Emmerich site. Contact Metav Werkzeuge for specification matching or procurement — our specialists at Metav Werkzeuge can advise on insert selection, clamping options and delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U794TM Manufacturer: Teknik Makina Product type: Indexable insert drill Diameter: 34 mm Cutting length: 170 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 263 mm Weight: 1.191 kg Compatible inserts: WCM-06T3 Compatible insert manufacturer: Korloy Model name (original): Vollbohrer SKU: U794TM FAQ What insert type fits this drill? The Indexable Insert Drill U794TM accepts Korloy WCM-06T3 inserts; this compatibility allows standard insert stocking and rapid replacement. Is the tool suitable for deep-hole applications? Yes, the drill’s 170 mm cutting length and Ø 34 mm diameter are intended for medium-deep holemaking where stability and repeatability are required. Which shank size is required for clamping? A 32 mm shank diameter provides the clamping interface; ensure the spindle or holder matches this dimension for secure fixation. Can the drill be used in CNC machining centres? The U794TM is designed for integration into industrial machining centres and standard drilling rigs, offering geometry and proportions that suit automated tool changes and programmed cycles. How does using replaceable inserts affect operating costs? Using replaceable inserts with this indexable drill reduces the need to replace full tools, lowering tooling expenditure and shortening maintenance time on the shop floor. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product data inconsistent: the article is listed as "Vollbohrer" (solid drill) but also specifies compatibility with indexable inserts (WCM-06T3 by Korloy); please verify the product specification to ensure accuracy, as this discrepancy could lead to confusion or incorrect usage, especially for customers relying on precise technical details for their applications, and it is crucial to clarify whether the tool is indeed a solid drill or designed for use with indexable inserts, as this distinction affects its functionality, performance, and suitability for specific tasks, so a thorough review of the product description and technical documentation is strongly recommended to avoid potential issues.

Benefit from a robust indexable insert drill body that combines precise chip control and a long cutting reach: Ø34 mm diameter with 136 mm cutting length offers consistent bore quality and efficient machining. Order the tool via Metav Werkzeuge or request product advice from our consultants. Indexable insert drill – Teknik Makina U634TM, Ø34 mm, 136 mm cutting length The indexable insert drill is engineered for CNC drilling of medium-to-large bores, compatible with Korloy WCM‑06T3 inserts and intended for industrial workshop environments. Indexable drill body Ø 34 mm 136 mm cutting length for deep holes Compatible with Korloy WCM‑06T3 inserts 32 mm shank diameter, 58 mm shank length Higher throughput through controlled chip evacuation The drill body is designed to improve productivity by combining a long cutting reach with stable chip guidance. The 136 mm cutting length reduces the need for secondary operations in many bore sequences, while the flute geometry promotes reliable chip clearance even under continuous cycles. As a result, cycle times can be reduced and tool-change frequency lowered, which supports a steadier production flow and predictable output quality. Fast, reliable insert changes and stock compatibility Toolholders accept standard Korloy inserts, specified as WCM‑06T3, which simplifies procurement and inventory management. Insert seating and clamping are configured for repeatable positioning so that edge geometry is utilised consistently; this leads to reproducible bore diameters and surface finishes. The use of widely available inserts also helps maintain uptime through faster replacement and fewer special-order dependencies. Rigid connection for accurate bores and reduced runout A substantial 32 mm shank and a 229 mm overall length provide the required stiffness for demanding machining tasks. The shank and clamping length of 58 mm ensure secure fixation in the toolholder, which minimises runout and supports tight dimensional control. When concentricity is preserved, rework is reduced and part tolerances are easier to meet on serial production runs. Practical workshop benefits and supply assurance Weighing about 1.111 kg, the tool is robustly built for everyday industrial use. The component is supplied under SKU U634TM and is offered with the supply reliability expected from Metav: a broad catalogue, a quality filter based in Emmerich and a demonstrable track record of supporting workshops and trade. This combination reduces supplier complexity while ensuring consistent availability for scheduled production. Contact Metav Werkzeuge for tailored advice on the Teknik Makina indexable insert drill U634TM and to ensure compatibility with existing holders and inserts – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: U634TM Manufacturer: Teknik Makina Diameter: 34 mm Overall length: 229 mm Cutting length: 136 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.111 kg eClass: 21180201 Compatible inserts: WCM‑06T3 Compatible insert manufacturer: Korloy Product type: Indexable insert drill body FAQ What inserts does this drill use? The answer: the drill body is specified for Korloy WCM‑06T3 inserts; replacement inserts from Korloy that match this designation are compatible with the U634TM. What are the key dimensions to check for holder compatibility? The essential measurements are the 32 mm shank diameter, 58 mm shank length, and the Ø34 mm cutting diameter; these determine clamping and clearance in the toolholder. How deep can this tool drill in one pass? The tool offers a 136 mm effective cutting length, which is the designed reach for machining applications before reconsidering pecking or coolant strategies. Is the U634TM suitable for serial production? Yes. The design focuses on repeatable insert clamping and shank rigidity to support serial drilling operations with consistent bore quality. Which SKU should be referenced when ordering or checking stock? Please refer to SKU U634TM for ordering, stock enquiries and spare insert matching. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust tool geometry, precise dimensions and insert compatibility to maintain steady production and minimise downtime; order directly via Metav Werkzeuge or consult their specialists for the optimal insert grade and clamping setup. Solid drill U136TM – 34 mm diameter, 161 mm overall length, Teknik Makina The solid drill U136TM is a rigid drill body intended for CNC metalworking and insert-based cutting systems, offering extended reach and reliable toolholding for workshop and production environments Solid construction, 161 mm overall length 34 mm diameter for deep holes 68 mm cutting length for effective reach Compatible with Korloy WCM-06T3 inserts Increased productivity through stable cutting geometry The U136TM is designed to deliver consistent hole quality by combining a substantial body with an extended cutting zone. With a 34 mm nominal diameter and a 68 mm cutting length, the tool enables deeper hole-making without frequent repositioning, which reduces cycle interruptions and handling time. The mass and geometry are balanced so that axial loads are distributed across the tool, which in practice means fewer adjustments and a steadier feed rate. This results in measurable gains in throughput for repetitive drilling operations and supports predictable machining cycles. Secure clamping for repeatable concentricity A firm connection to the spindle is essential for concentric holes; the U136TM offers a 32 mm shank that is compatible with standard toolholders, promoting accurate clamping and minimised runout. At an overall length of 161 mm and a weight of 0.851 kg, the tool body is dimensioned to provide rigidity while remaining manageable during tool changes. Such a combination reduces vibration and improves surface finish, so tolerances can be maintained across production runs. Where high positional accuracy is required, the solid shank and robust construction help ensure repeatable results. Cost-effective maintenance via indexable inserts The drill body is specified for use with Korloy inserts, in particular the WCM-06T3 grade, enabling a shift from full-tool replacement to targeted insert changes. This approach lowers inventory costs and shortens maintenance times: worn cutting edges are replaced rather than the entire tool. Insert compatibility also allows selection of grades suited to specific workpiece materials and cutting conditions, improving tool life and operational economy. The modular concept supports rapid restoration of cutting performance with minimal machine downtime. Integration, handling and workshop planning Produced by Teknik Makina and listed under SKU U136TM, the tool body is suited to systematic workshop integration where standardisation of tool interfaces is valued. The 68 mm effective cutting reach and the 32 mm shank diameter should be matched to the chosen holder and spindle interface to maintain stiffness. When planning toolsets, consider pairing the body with Korloy WCM-06T3 inserts and an appropriate clamping system to exploit the full potential of the geometry. For complex applications or specific materials, technical advice is available to ensure correct insert grade selection and optimal cutting data. For precision drilling with reliable insert interchangeability, contact Metav Werkzeuge to specify Teknik Cutting Tools' U136TM and confirm the ideal Korloy WCM-06T3 configuration for the intended machining task Technical data Article number: U136TM Manufacturer: Teknik Makina Facts Diameter: 34 mm Overall length: 161 mm Shank diameter: 32 mm Cutting length: 68 mm Shank length: 58 mm Weight: 0.851 kg Special features Compatible inserts: WCM-06T3 Compatible insert manufacturer: Korloy FAQ Which insert type fits this drill body? The U136TM drill body is specified for Korloy WCM-06T3 insert types, allowing straightforward replacement of cutting edges. What are the key dimensions to consider for clamping? Focus on the 32 mm shank diameter and the 161 mm overall length when selecting holders to ensure secure toolholding and correct projection. How long is the cutting reach of the tool? The tool provides a 68 mm cutting length, suitable for deeper holes without multiple passes. Is the U136TM suitable for automated toolchanging? The solid shank and standardised dimensions permit integration into automated tool racks when combined with matching holders and clamping systems. Can the insert grade be changed for different materials? Yes, by using different Korloy WCM-06T3 grades or equivalents, the cutting performance can be adapted to specific workpiece materials and machining conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable‑insert drilling solution that combines consistent chip control and rigid clamping for repeatable holemaking. The combination of a Ø34 mm cutting diameter and a 68 mm cutting length delivers efficient material removal; order the solid drill directly via Metav Werkzeuge or ask their consultants for application advice. Solid drill U934TM – Indexable‑insert drill body, Ø34 mm, SPMG 1104 compatible (Teknik Makina) The Solid drill U934TM is an indexable‑insert drill body engineered for industrial CNC drilling tasks where quick insert changes and stable toolholding support continuous production. It is designed to be paired with SPMG 1104 inserts from major manufacturers for straightforward retrofit into existing toolkits. Indexable SPMG 1104 compatibility Ø34 mm diameter with 68 mm cutting length 32 mm shank for rigid clamping Compatible with Taegutec and YG-1 inserts Higher throughput through stable geometry and controlled chip removal The U934TM body is built to maintain consistent cutting geometry, improving bore quality and reducing rework. With a Ø34 mm nominal diameter and a 68 mm cutting length, the tool provides a substantial effective cutting zone while the 32 mm shank ensures rigid clamping in standard holders. This combination reduces vibration and supports higher feed rates, so cycle times are shortened and production uptime is increased. The relatively low mass (approximately 0.784 kg) aids rapid spindle acceleration without compromising stability. Cost efficiency from insert‑based drilling and broad insert compatibility Designed for use with SPMG 1104 indexable inserts, the drill body allows economical tool management: worn inserts are replaced rather than the entire tool, which lowers tooling expenditure and shortens maintenance intervals. Compatibility with established insert suppliers such as Taegutec and YG‑1 simplifies procurement and stocking. The modular approach delivers consistent cutting edges and faster set‑up, translating technical precision into measurable cost‑benefit over repetitive production runs. Simple integration and secure mounting for repeatable results The tool’s 32 mm clamping diameter and 58 mm reception length provide a secure connection to standard toolholders, supporting repeatable axial positioning. An overall length of 161 mm keeps the overhang predictable for fixture planning. These measurable dimensions enable straightforward set‑up on machining centres and drilling machines, helping to avoid trial‑and‑error adjustments and to preserve machine time for productive work. Practical logistics and workshop benefits The solid drill body with SKU U934TM offers predictable handling and storage characteristics; at roughly 0.784 kg it is simple to manipulate during tool change. Stocking bodies instead of complete solid tools reduces inventory costs while maintaining readiness for a range of diameters via compatible inserts. For technical queries on suitability or for assistance matching insert grades to specific operations, Metav Werkzeuge provides application support and can advise on optimal insert choices and clamping arrangements. For tailored advice on deploying the Teknik Cutting Tools U934TM in a production environment or for supply enquiries, contact Metav Werkzeuge GmbH — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and availability Technical data SKU: U934TM Name: Solid drill (translated from Vollbohrer) Manufacturer: Teknik Makina Core specifications Diameter: 34 mm Overall length: 161 mm Cutting length: 68 mm Shank diameter: 32 mm Shank reception length: 58 mm Weight: 0.784 kg Compatibility & features Insert type: SPMG 1104 Compatible insert brands: Taegutec, YG-1 Indexable‑insert drill body design FAQ Which insert type does this drill body accept? The drill body accepts SPMG 1104 indexable inserts; replacement inserts from Taegutec and YG‑1 fit the same seat. How is the tool clamped in a holder? Clamping is via a 32 mm shank diameter with a 58 mm reception length, providing secure mounting and repeatable axial positioning for the U934TM drill body. Can inserts be changed on the shop floor? Yes, the modular design of the drill body allows rapid on‑site replacement of SPMG 1104 inserts without removing the entire tool from the machine. What are the key dimensions to plan for in fixture design? Use the Ø34 mm cutting diameter, 68 mm cutting length and 161 mm overall length as primary references when planning tool overhang and fixture clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable insert solution that combines reliable clamping with a substantial cutting length for efficient mid‑depth drilling; the 32 mm shank provides secure holding and the compatibility with SPMG 1104 inserts keeps tooling costs controllable — order via Metav Werkzeuge or request technical advice from our consultants. Indexable insert drill (U734TM) — 34 mm diameter, compatible with SPMG 1104 (Teknik Makina) An indexable insert drill designed for stable, efficient medium‑diameter drilling in machining centres and turning‑mill setups 34 mm diameter for medium holes Compatible with SPMG 1104 inserts 32 mm shank for secure clamping 136 mm cutting length for deeper passes Consistent hole quality and repeatable performance The tool is engineered to deliver steady results across series production by combining a 34 mm nominal diameter with a 136 mm cutting length. This geometry reduces the need for multiple tool changes on typical mid‑depth holes, improving cycle time and reducing handling. Where tolerance and roundness are critical, the indexable system maintains edge geometry via replaceable inserts, allowing predictable regrinding intervals and simplified maintenance. The overall design supports stable chip evacuation and repeatable contact between insert and workpiece. Secure clamping and reduced runout for reliable machining A substantial 32 mm shank and a shank engagement length of 58 mm ensure a solid connection to the toolholder, which minimises runout and vibration during drilling. Reduced vibrations translate directly into longer insert life and more consistent surface finish, lowering rework rates. At approximately 1.04 kg, the assembly balances mass for rigidity without becoming unwieldy during tool handling or changeover in the toolroom. Lower tooling cost and fast turnaround with indexable inserts The drill is specified for SPMG 1104 indexable inserts and is compatible with major insert manufacturers such as Taegutec and YG‑1. Using indexable inserts means worn cutting edges are replaced in seconds instead of replacing the whole drill, which reduces per‑hole tooling cost and downtime. For operations that require quick restoration of cutting geometry and consistent chip control, the replaceable insert concept offers clear economic and logistical benefits. Practical integration into workshop workflows Designed for straightforward installation in standard toolholders, the drill supports efficient production planning and stocking strategies. The combination of a standard shank size and broad compatibility with established insert types allows simplified procurement and inventory management. For teams aiming to centralise tooling across multiple machines, the tool’s familiar interface and insert family make it easy to align with existing tool libraries. Contact Metav Werkzeuge for a tailored technical consultation on the Teknik Cutting Tools indexable insert drill U734TM and to arrange procurement or detailed specification sheets Technical data Article number: U734TM Manufacturer: Teknik Makina Product type: Indexable insert drill Measured values Diameter: 34 mm Overall length: 229 mm Cutting length: 136 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.04 kg Design / Special features For indexable inserts SPMG 1104 Compatible with Taegutec inserts Compatible with YG‑1 inserts FAQ What insert type does the drill use? The drill accepts SPMG 1104 indexable inserts; this allows quick edge changes and straightforward stockkeeping. Is the shank size suitable for standard holders? Yes, the 32 mm shank fits common toolholders and is designed for stable clamping in machining centre tooling systems. Can the drill be used with Taegutec or YG‑1 inserts? Compatibility with Taegutec and YG‑1 inserts is confirmed for the U734TM, offering flexibility in procurement. What hole depth is achievable with the tool? The tool provides a 136 mm cutting length, enabling efficient mid‑depth drilling without intermediate tool swaps. How does the indexable concept affect running costs? Using replaceable inserts reduces per‑hole tooling cost and downtime, as only cutting edges are replaced rather than the complete drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable 34 mm drilling with a 102 mm cutting length and a 32 mm shank provides rigid, repeatable performance for demanding metalworking tasks; order the tool directly via Metav Werkzeuge or consult our specialists for application support. Teknik Makina Vollbohrer (Solid Drill) — 34 mm, compatible with SPMG 1104 inserts The Teknik Makina Vollbohrer is a precision drilling solution for metalworking that combines robust geometry with compatibility for indexable inserts, suited to workshop and production use 34 mm cutting diameter 102 mm cutting length 32 mm shank diameter Compatible with SPMG 1104 inserts Consistent rigidity for repeatable holes The drill body delivers stable machining thanks to its sturdy geometry and measured dimensions. With a 34 mm cutting diameter and 102 mm cutting length, the design reduces chatter and improves hole quality, which is crucial for series production and tight-tolerance assemblies. The substantial 32 mm shank and an overall mass of 0.943 kg help maintain concentricity in the holder, so tool life and surface finish remain dependable across batches. Economical insert system for quick index changes This tool is designed to accept SPMG 1104 indexable inserts, enabling fast cutting-edge replacement and predictable cost control. Compatible manufacturers include Taegutec and YG-1, allowing flexible sourcing of inserts and grades for different materials. Using replaceable inserts reduces downtime for regrinding and lets the workshop adapt micro-geometry and grades to specific steels and alloys without replacing the whole tool body. Workshop-ready dimensions and secure clamping With an overall length of 195 mm and a 58 mm shank length, the tool fits common holders while preserving sufficient overhang for deep hole reach. The combination of cutting and shank lengths supports secure clamping and minimises deflection when paired with an appropriate holder. The design is aimed at integrating into existing CNC tool systems without complex adaptations, keeping machine setup and cycle times efficient. For procurement or technical advice on the Teknik Makina Vollbohrer (SKU U834TM), please contact Metav Werkzeuge for personalised guidance and reliable supply from Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: U834TM Brand: Teknik Makina Product: Vollbohrer (solid drill) Facts Diameter: 34 mm Overall length: 195 mm Cutting length: 102 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.943 kg Special features For indexable inserts: SPMG 1104 Compatible insert manufacturers: Taegutec; YG-1 FAQ What materials can this drill handle? The Teknik Makina Vollbohrer (solid drill, SKU U834TM) is intended for metalworking where indexable inserts such as SPMG 1104 are appropriate; insert grade selection determines suitability for steels, stainless steels and alloyed materials Which insert types fit this drill body? This drill body accepts SPMG 1104 indexable inserts; inserts from Taegutec and YG-1 are listed as compatible with the tool What are the key dimensions to check before ordering? Confirm the 34 mm cutting diameter, 102 mm cutting length and 32 mm shank diameter to ensure compatibility with holders and required hole depth for the application Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a large‑diameter solution that combines substantial cutting capacity and rapid insert changes for uninterrupted production. The robust construction and standard CCMT 1204 compatibility support efficient internal turning and lower tooling overheads; order the component directly via Metav Werkzeuge or consult Metav's specialists for integration advice. Boring tool TKB153TM — 350 mm diameter, L 154 mm (Teknik Makina) A compact precision boring tool, Boring tool TKB153TM, engineered for heavy internal turning using CCMT 1204 indexable inserts. Boring tool for CCMT 1204 inserts Large cutting diameter 350 mm Overall length 154 mm for deep cuts Solid construction, weight 4.37 kg Maximise throughput with a 350 mm cutting capacity The large 350 mm cutting diameter and compatibility with CCMT 1204 inserts enable the machining of substantial internal bores without repeated re‑setups. By consolidating large‑bore operations on a single tool body, cycle times are reduced and fixture changes become less frequent. For production environments the combination of wide cutting capacity and standardised insert geometry supports scalable output while maintaining process repeatability. Rigidity and stability for consistent bore quality An overall length of 154 mm combined with a mass of 4.37 kg gives the tool the necessary rigidity to resist deflection during deep internal cuts. Reduced vibration and stable tool behaviour translate into improved surface finish and tighter dimensional control. The tool body is designed to work with indexable inserts, so cutting edges can be renewed quickly without discarding the tool holder — a practical route to sustained precision and less scrap. Faster downtime recovery through replaceable inserts Use of standard CCMT 1204 indexable inserts keeps maintenance actions short and predictable. When an insert is worn, a replacement can be fitted and aligned in minutes, restoring cutting performance without tool regrinding. This approach lowers operating costs by extending the life of the holder assembly and keeping spare‑part inventories focused on a small number of common inserts rather than many bespoke cutters, improving overall equipment effectiveness. Integration into mixed production environments Supplied under Teknik Makina, the TKB153TM format is intended for straightforward incorporation into existing tool sets and turret systems that accept indexable tooling. The tool's labelling and SKU (TKB153TM) simplify stock management and traceability. Metav's European distribution hub ensures reliable availability for workshop replenishment, supporting uninterrupted machining schedules and predictable lead times. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Teknik Makina TKB153TM boring tool and securing reliable supply for high‑precision machining Technical data Article number / SKU: TKB153TM Label: 350mm Ausbohrwerkzeug CCMT 1204 L154mm Manufacturer: Teknik Makina Facts Diameter: 350 mm Maximum cutting diameter: 400 mm Overall length: 154 mm Weight: 4.37 kg eClass: 21181208 Special features Compatible with CCMT 1204 indexable inserts Product type: Boring tool Category: Machining FAQ What insert type fits this boring tool? The boring tool accepts CCMT 1204 indexable inserts; this standard geometry allows quick replacement of cutting edges and straightforward procurement of spares. What is the maximum bore that can be machined? The tool supports a cutting diameter of 350 mm, with a specified maximum cutting diameter of 400 mm noted in the technical data. Why does overall length matter for bore quality? An overall length of 154 mm limits overhang and helps preserve rigidity, which is important for achieving consistent bore diameter and surface finish with the TKB153TM. How are worn tips handled during production? Worn tips are replaced as indexable inserts, restoring cutting performance rapidly and keeping downtime to a minimum for continuous machining operations. How is the tool identified for ordering and stock control? The product is listed under SKU TKB153TM by Teknik Makina; using the SKU ensures the correct boring tool and compatible insert configuration are supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of precision and machining range: robust fine-finishing capability for internal bores with compatibility for CCMT 09T3 indexable inserts and a substantial maximum cutting diameter of 410 mm — available through Metav Werkzeuge for direct procurement or technical consultation. THB134TM — 350 mm fine-finishing boring tool for CCMT 09T3 inserts by Teknik Cutting Tools The THB134TM is a purpose-built boring tool for fine machining, designed for internal turning operations and compatible with CCMT 09T3 indexable inserts. For CCMT 09T3 indexable inserts Max cutting diameter 410 mm Overall length 212 mm Cutting height 142 mm Superior finish quality through vibration control and rigidity This boring bar is engineered to deliver a consistently high-quality surface finish in fine machining applications. The tool's substantial diameter and construction provide enhanced rigidity, which reduces chatter and improves repeatability across workpieces. Compatibility with CCMT 09T3 inserts enables precise edge geometry selection for delicate cuts and optimised chip control. For machine shops focused on tight tolerances, the combination of mechanical stability and suitable insert geometry translates into fewer reworks and steadier production runs. Designed to accelerate workflow and reduce setup times With an overall length of 212 mm and a clearly defined cutting height of 142 mm, this tool integrates easily into standard turning setups. The clear dimensional data simplifies fixture planning and tool offset programming, supporting faster changeovers on multi-operation lathes and CNC turning centres. By streamlining the setup and delivering consistent cutting conditions, the boring tool helps to improve throughput and operational efficiency without compromising on finishing quality. Practical integration and maintenance for busy toolrooms Installation and replacement of CCMT 09T3 inserts are straightforward, enabling quick maintenance and minimal downtime during production shifts. The tool's measured parameters, including the max cutting diameter of 410 mm, allow planning for a wide range of internal bore sizes while keeping stock and handling requirements manageable. For production managers and technical planners, the clear specifications support accurate simulation and toolpath verification, reducing the risk of costly collisions or improper tool selection. Contact Metav Werkzeuge to discuss integration, request technical drawings or confirm suitability for specific turning centres — Metav's specialists will advise on application fit and delivery from Emmerich. Technical data SKU: THB134TM Product: Boring tool for fine machining For inserts: CCMT 09T3 Manufacturer: Teknik Cutting Tools Label: 350mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 L212mm Facts Diameter: 350 mm Max cutting diameter: 410 mm Overall length: 212 mm Cutting height: 142 mm eClass: 21041590 Special features Compatible with CCMT 09T3 indexable inserts Optimised for fine finishing operations Compact dimensions for standard turning centres FAQ What insert type does the tool accept? The THB134TM accepts CCMT 09T3 indexable inserts, providing a balance of edge strength and fine-finishing geometry suitable for internal turning. Which bore sizes can be machined with this tool? The tool supports operations up to a max cutting diameter of 410 mm, with a nominal tool diameter of 350 mm and an overall length of 212 mm for planning and clearance calculations. Is the tool suitable for high-precision workshop applications? Yes, the design emphasises rigidity and repeatability for fine machining, making it appropriate for toolrooms and production environments where surface finish and dimensional accuracy are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a combination of high rigidity, large bore capacity and reliable insert compatibility to maintain a consistent finishing quality. The 350 mm design with a 40 mm shank and compatibility with CCMT 09T3 indexable inserts delivers stable performance for demanding finishing operations. Order the boring tool directly via Metav Werkzeuge or ask our consultants if required. Boring tool for fine machining (350 mm) – for CCMT 09T3 indexable inserts, Teknik Makina A precision boring tool for fine machining designed for large-diameter finishing tasks and compatible with CCMT 09T3 indexable inserts. 350 mm diameter Compatible with CCMT 09T3 inserts 40 mm shank diameter Up to Ø410 mm cutting diameter Consistent finishing through optimised rigidity and geometry The boring bar is engineered to provide stable cutting for finishing passes. With a substantial 40 mm shank and a body designed for minimal deflection, the system reduces vibration and improves repeatability. This results in a more consistent surface finish and reduces the need for rework. The compatibility with CCMT 09T3 indexable inserts allows straightforward tool replacement and fine-tuning of cutting parameters without changes to the holder setup. Large bore capability that shortens cycle times Designed for bore diameters around 350 mm with a maximum cutting diameter of Ø410 mm, the tool enables larger envelope machining without multiple set-ups. Fewer tool changes and a reduced number of passes translate into measurable time savings on finishing operations. The tool’s cutting height of 93.7 mm supports secure insert seating and helps maintain cutting geometry during longer cuts, contributing to higher process efficiency. Practical benefits for workshop workflows By using standard indexable inserts, workshop maintenance becomes more predictable: inserts are fast to replace, and worn grades can be swapped to suit material and speed requirements. The result is a lower effective tooling cost per component and less downtime for replenishment. For mixed production environments and contract machining, this translates to improved throughput and a dependable finishing process. Application range and integration into toolrooms The boring assembly is intended for precision finishing tasks in tooling shops, general machining and components production where tight surface quality and dimensional stability are required. The combination of large diameter capability and insert compatibility makes it suitable for turning centres and boring mills handling medium to large components. For suitability queries or detailed application advice, Metav’s specialists provide technical guidance to align cutting data and insert selection with individual requirements. Contact Metav Werkzeuge for application-specific recommendations and to arrange procurement of the Teknik Makina THB114TM boring tool for precision finishing Technical Data Article number: THB114TM Product: Boring tool for fine machining Manufacturer: Teknik Makina Label: 350 mm boring tool for fine machining CCMT 09T3 ECLASS: 21041590 Facts Diameter: 350 mm Shank diameter: 40 mm Max cutting diameter: Ø410 mm Cutting height: 93.7 mm Special features Compatible with CCMT 09T3 indexable inserts Intended for fine machining / finishing Product type: Boring tool for fine machining SKU: THB114TM FAQ What insert type is compatible with this boring tool? The tool is designed for CCMT 09T3 indexable inserts and uses the standard clamping and seat geometry associated with that insert family. What bore diameter range does the tool cover? The boring assembly is optimised for a nominal diameter of 350 mm and supports a maximum cutting diameter of Ø410 mm for finishing operations. What is the shank diameter and how does it affect rigidity? The tool features a 40 mm shank, which contributes to higher rigidity and reduced deflection during finishing passes. Can this tool be used for roughing as well as finishing? The design is intended for fine machining and finishing; for heavy roughing applications, a dedicated roughing tool or insert grade may be more suitable. What is the exact product reference for ordering? Order under SKU THB114TM, described as a 350 mm boring tool for fine machining by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity and standardised insert compatibility for reliable turning performance; order directly via Metav Werkzeuge or contact the consultants for application advice. Boring bar SIR S50U (K342TM) — 50 mm shaft, 350 mm overall length — Teknik Makina The SIR for IR Indexable Inserts (K342TM) is a right-hand boring bar designed for stable heavy-duty turning with standard IR indexable inserts in industrial lathe applications SIR S50U design for high stability 50 mm shaft diameter for rigid set-up Compatible with 16 IR indexable inserts Right-hand cutting direction Built for rigidity and consistent surface quality The machining set-up benefits from a 50 mm shaft diameter and a substantial outer Ø54 mm section that together deliver increased stiffness and reduced vibration. This rigidity is converted into measurable process advantages: improved surface finish and extended insert life. The tool is specified for heavy turning tasks where stability is decisive; with a compact mass of 5.337 kg, inertia is controlled while maintaining structural robustness. The design supports consistent repeatability, which reduces scrap rates and rework across production batches. Fast insert changes and standardised clamping for uptime gains Compatibility with 16 IR indexable inserts and the matching clamping holder IR16 simplifies inventory and shortens changeover times. Insert retention is secured with a Torx system (Torx key T15; screw M3.5x11) and uses the TA060 mounting plate together with pass ring BSP010, so insert replacement is straightforward and reproducible. The right-hand cutting orientation is specified for conventional turning centres and is supported by common workshop practices; this standardisation reduces the need for bespoke tooling and speeds up maintenance cycles. Practical dimensions and seamless machine integration The bar’s 350 mm overall length and 48 mm cutting height are balanced to suit a wide range of lathe turrets and toolpost arrangements, offering a compromise between reach and stiffness. Its ISO designation SIR S50U denotes a machining tool that has been configured for indexable-insert turning systems, enabling easy matching with compatible holders and turret interfaces. The measured dimensions make it simple to plan fixture clearances and collision avoidance, while the compact profile supports efficient tool storage and handling in busy workshop environments. Discuss application specifics with Metav Werkzeuge to verify compatibility with existing turning centres and to obtain tailored recommendations for the Teknik Makina SIR S50U; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance Technical Data SKU: K342TM Manufacturer: Teknik Makina Designation EN: SIR for IR Indexable Inserts ISO designation: SIR S50U Core dimensions Shaft diameter: 50 mm Overall length: 350 mm Outer diameter: 54 mm Cutting height: 48 mm Weight: 5.337 kg Materials & features Compatible with: 16 IR indexable inserts Clamping holder designation: IR16 Torx key size: T15 Torx screw: M3.5x11 U plate: TA060 Pass ring: BSP010 Cutting direction: right-hand FAQ What insert type does this boring bar accept? The SIR S50U boring bar (K342TM) is specified for 16 IR indexable inserts, using the IR16 clamping configuration for secure retention. Is the bar suitable for heavy-duty turning operations? Yes. The 50 mm shaft diameter and robust outer section provide the stiffness required for heavy turning tasks, supporting improved surface finish and longer insert life. Which fasteners and accessories are required for insert mounting? Insert retention uses a Torx system — key T15 and screw M3.5x11 — together with the TA060 plate and pass ring BSP010 for standardised assembly. Can the tool be used on left-hand turning centres? This item is manufactured for right-hand cutting direction; for left-hand operations, a correspondingly configured tool should be selected. How does this boring bar integrate with turret toolholders? With an ISO designation of SIR S50U and a defined 350 mm overall length and 48 mm cutting height, the bar is compatible with common turret interfaces and can be mounted using standard clamping systems Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust chamfering solution that combines a 76 mm cutting diameter, a 60 mm shank and compatibility with APKT 1604 indexable inserts for a reliable production flow; order the chamfer cutter directly via Metav Werkzeuge or ask our consultants if needed. Chamfer cutter by Teknik Makina — 45° chamfer, APKT 1604 compatible Chamfer cutter for industrial edge chamfering and face preparation, designed for indexable insert operation in CNC and milling applications *Compatible with APKT 1604 inserts *45° chamfer geometry for precise edge preparation *60 mm shank for secure machine clamping *Six cutting edges for efficient material removal Precision chamfering that reduces set-up time and scrap The chamfering solution is engineered to deliver consistent results on series production runs. With a 45° cutting geometry and a substantial 76 mm maximum cutting diameter, the tool reduces the need for multiple passes and avoids uncontrolled burr formation. The insert system using APKT 1604 indexable inserts allows quick replacement without regrinding, which shortens downtime and keeps machining cycles predictable. This focus on process efficiency translates into reduced setup time and less scrap across batches. Secure clamping and stable cutting for improved surface quality A 60 mm shank provides the required rigidity for heavy-duty milling and contributes to vibration damping, which improves finished-edge consistency. The tool features six cutting edges, a configuration that spreads the cutting load and extends insert life while maintaining a steady material flow. For workshops stepping up production or integrating larger workpieces, the robust shank and balanced geometry ensure repeatable quality and a lower risk of chatter or edge burn. Versatile indexable system explained for practical application Using APKT 1604 indexable inserts means the tool can be maintained with standard industry inserts from compatible manufacturers, keeping running costs predictable. Insert indexing requires only a simple Torx screw (M4x10) and a T15 key for secure retention and fast changeovers. This familiar indexable concept simplifies inventory management and training requirements, making the cutter suitable both for experienced toolrooms and for operations transitioning to indexable tooling. Discuss integration and availability with Metav Werkzeuge — specify Teknik Makina chamfer cutter (SKU T456TM) to receive tailored advice and order support from the Emmerich team Technical Data Article number: T456TM Manufacturer: Teknik Makina Core specifications Cutting diameter max: 76 mm Shank diameter: 60 mm Overall length: 50 mm Weight: 0.734 kg Cutting edges: 6 Chamfer angle: 45° Special features For indexable inserts APKT 1604 Compatible inserts manufacturer: Korloy Torx screw: M4x10 Torx key: T15 FAQ What materials is this chamfer cutter suitable for? The chamfer cutter by Teknik Makina (SKU T456TM) is designed for general milling and chamfering applications; selection of the correct APKT 1604 insert grade will determine suitability for specific materials. How are the inserts secured and replaced? Inserts are clamped with an M4x10 Torx screw; a T15 key is used for secure fastening and quick replacement when the APKT 1604 insert reaches wear limits. Can the tool be used on large-format CNC machines? Yes — the 60 mm shank provides the rigidity required for stable clamping in larger machine spindles, enabling reliable chamfering on bigger workpieces. How many cutting edges are available and what is the benefit? The cutter has six cutting edges, which distribute cutting forces and extend insert life while maintaining consistent material removal and surface finish. Is the cutter compatible with inserts from different manufacturers? The tool is specified for APKT 1604 inserts and is noted as compatible with Korloy inserts; using equivalent grades from other reputable insert manufacturers is possible if dimensions match. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact chamfering solution that combines high edge quality with quick insert changes — the tool’s Ø35 mm body and 45 mm shank deliver stable clamping and reliable results in series production; order the tool directly via Metav Werkzeuge or ask our consultants for application support. Chamfer mill T457TM by Teknik Makina — 15° cutting angle, compatible with APKT 1604 The Chamfer mill is a solid chamfering cutter designed for indexable inserts and precise edge finishing in metalworking applications. Ø35 mm body diameter Compatible with APKT 1604 inserts 45 mm shank for stable clamping Six cutting edges for smooth chamfers Consistent chamfers for repeatable component quality The T457TM delivers precision chamfering through a compact geometry and carefully defined cutting angle. With a 50.5 mm cutting diameter at maximum and a nominal Ø35 mm body, the cutter is configured to produce uniform chamfers across batches, reducing rework and inspection time. The tool’s 6 cutting edges distribute cutting forces evenly, which helps to maintain a steady surface finish and extend insert life. This design suits metalworking environments where reproducibility and tight edge tolerances matter. Quick set-up and dependable toolholding for efficient cycles A short overall length of 60 mm and a robust 45 mm shank support stable clamping in standard toolholders, lowering vibration and improving surface integrity. Insert fixation uses an M4x10 Torx screw and a T15 key, enabling secure, fast replacements without specialised fixtures. The compatibility with APKT 1604 indexable inserts from major manufacturers gives flexibility when selecting grades for different materials, while the compact mass (0.415 kg) simplifies handling during tool changes and reduces spindle load during operation. Designed for workshop reliability and simple maintenance The cutter is built for frequent use and straightforward upkeep: replaceable insert geometry means maintenance is limited to routine insert changes rather than full-tool replacement. Compatibility with inserts from Korloy and standard clamping hardware ensures easy sourcing of consumables. The modest tool mass and standard shank diameter also support predictable balancing and integration into existing machining setups. Documentation and parts alignment are simplified by the clear use of standardised insert types and torque requirements. Contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T457TM Article name: Fasenfräser Manufacturer: Teknik Makina Specifications Diameter (body): 35 mm Maximum cutting diameter: 50.5 mm Shank diameter: 45 mm Overall length: 60 mm Weight: 0.415 kg Cutting edges: 6 Cutting angle: 15° Torx screw: M4x10 Torx key: T15 Compatible inserts: APKT 1604 Compatibility & special features Suitable insert manufacturer: Korloy Angles available (as listed): 15°, 30°, 45°, 60°, 75° Indexable-insert design for quick replacement Compact construction for stable clamping FAQ What insert type does this chamfering cutter use? The chamfer mill T457TM is designed for APKT 1604 indexable inserts and is compatible with inserts from Korloy. What shank diameter is required for mounting? Mounting requires a toolholder that accepts a 45 mm shank, as specified for the T457TM. How many cutting edges does the cutter have and what is the benefit? The cutter has six cutting edges, which distribute cutting forces to produce smoother chamfers and extend insert life. Which cutting angles are available with this tool? The product data lists available angles of 15°, 30°, 45°, 60° and 75°, enabling a range of chamfer geometries. What size Torx screw and key are used for the inserts? Insert clamping uses an M4x10 Torx screw tightened with a T15 key, providing secure fixation for the indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of precise chamfering, fast insert changes and a compact 20 mm shank for stable mounting; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Chamfer cutter S338TM — 35 mm diameter, 20 mm shank (Teknik Makina) A Chamfer cutter S338TM designed for accurate 45° and 90° chamfering in machining operations, compatible with TCMT 16T3 indexable inserts for efficient edge preparation 35 mm cutting diameter 20 mm shank diameter Compatible with TCMT 16T3 inserts 45° and 90° chamfer angles Accurate chamfers with predictable results The S338TM delivers consistent chamfer geometry thanks to its 35 mm nominal diameter and a cutting height of 35 mm, which together enable stable material engagement on flat workpieces. With two cutting edges, the cutter balances material removal and surface finish, reducing the need for secondary operations. The combination of a solid 20 mm shank and a compact overall length of 100 mm ensures low run-out when mounted in standard toolholders, promoting repeatable angles and reduced scrap rates. Where process reliability matters, choosing a cutter with defined dimensions simplifies setup routines and quality documentation. Rapid insert changes and short machine downtime This chamfering solution accepts TCMT 16T3 indexable inserts, enabling quick replacement without complex regrinding. A single Torx fixing (M3.5x8.5) secured with a T15 key keeps clamping straightforward and repeatable; the simple fastening reduces changeover time and lowers the risk of incorrect seating. Using standard indexable inserts allows stock consolidation and predictable cutting performance across batches. For production environments, the result is improved throughput and easier inventory management, as inserts can be rotated or replaced independently from the cutter body. Versatile angles, robust handling and predictable lifecycle Designed to produce both 45° and 90° chamfers, the cutter suits deburring, edge preparation and bevel creation across a range of common tasks. The two-flute configuration contributes to balanced cutting forces and a stable finish on aluminium and steel workpieces in typical workshop applications. At 0.324 kg, the tool body is light enough for safe handling yet substantial enough to resist chatter in regular milling setups. The modular nature of the design—indexable inserts and standard fixing—supports maintenance workflows and keeps toolholding costs manageable over the tool’s lifetime. Contact Metav Werkzeuge for tailored application advice and to source the S338TM chamfer cutter from our Emmerich site — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S338TM Manufacturer: Teknik Makina Diameter: 35 mm Shank diameter: 20 mm Cutting height: 35 mm Overall length: 100 mm Weight: 0.324 kg Cutting edges: 2 Chamfer angles: 45° / 90° Torx screw: M3.5x8.5 Torx key: T15 Features For indexable inserts: TCMT 16T3 Suitable for 45° and 90° chamfers Two-flute cutter for balanced cutting forces Compact 20 mm shank for standard toolholders FAQ What chamfer angles can be produced with this cutter? The cutter supports both 45° and 90° chamfers; the geometry permits reliable edge creation at these standard angles for deburring and bevel preparation. Which inserts are compatible with the cutter? The tool accepts TCMT 16T3 indexable inserts, which are widely available and easy to replace to restore cutting performance. What are the mounting dimensions for the cutter? The S338TM features a 20 mm shank and an overall length of 100 mm, making it compatible with standard collet and holder systems that accept a 20 mm shank. How many cutting edges does the tool have and what is the effect on finish? The cutter has two cutting edges, offering a compromise between material removal rate and surface finish, resulting in stable cutting forces and good edge quality. Is the fixing hardware included and what tool is required? Fixing is achieved with a Torx screw M3.5x8.5; a T15 key is used for secure and repeatable clamping of the insert. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid solution that delivers repeatable bevel geometry and simple insert handling; the combination of a 48 mm shank and a 30° cutting angle ensures stable machining and consistent results. Order the tool directly via Metav Werkzeuge or consult their specialists for application-specific advice. Teknik Makina T454TM Chamfer Cutter — 35 mm, compatible with APKT 1604 The chamfer cutter by Teknik Makina is designed for precision beveling and edge preparation in milling operations, combining a compact tool body with indexable insert technology for efficient shop-floor performance 35 mm cutting diameter for precise chamfers Compatible with APKT 1604 indexable inserts 30° cutting angle for standard bevel geometry 48 mm shank for rigid toolholding Repeatable chamfers through measured geometry A controlled chamfer is achieved thanks to the tool's 35 mm diameter and 30° cutting angle, which together produce a consistent bevel across successive workpieces. The design uses indexable inserts that ensure the cutting edge can be restored quickly by rotation or replacement, so downtime is reduced and process stability is increased. For production environments where reproducibility matters, this configuration allows a predictable set-up that can be documented and repeated; the result is fewer rejects and an easier integration into existing machining cycles. Faster changeover and simplified tooling management Compatibility with APKT 1604 inserts and the common Korloy insert designation streamlines inventory: one insert type supports multiple operations. The cutter uses an M4x10 Torx screw together with a T15 key for secure seat clamping, enabling rapid insert changes with standard workshop tools. This reduction in SKU variety and the straightforward clamping concept help to shorten maintenance intervals and to lower logistical complexity, which is particularly useful for small series or mixed-production shops that value agility. Rigid shank, compact length — stability under load The tool's 48 mm shank and a 50 mm overall length create a compact, rigid assembly that resists deflection during chamfering. With six cutting edges, material removal is distributed to maintain surface quality while moderating cutting forces; the modest mass of 0.61 kg keeps spindle load predictable. Where chatter and vibration would otherwise compromise edge quality, this construction is intended to achieve a smoother finish and a more reliable cutting process, reducing rework and enhancing throughput. Speak with Metav Werkzeuge for tailored application guidance on the T454TM chamfer cutter — Metav's specialists in Emmerich can advise on insert selection, clamping procedures and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T454TM Manufacturer: Teknik Makina Designation: Chamfer cutter Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key: T15 Facts Diameter: 35 mm Max. cutting diameter: 65 mm Shank diameter: 48 mm Number of cutting edges: 6 Cutting angle: 30° Overall length: 50 mm Weight: 0.61 kg SKU: T454TM Special features For indexable inserts APKT 1604 Six cutting edges for distributed cutting load Compact design for rigid toolholding Uses Torx M4x10 clamping screw, T15 key required FAQ How many cutting edges does the T454TM have? The T454TM is supplied with six cutting edges, which helps to distribute cutting forces and maintain surface quality during chamfering. Which insert type fits this chamfer cutter? This chamfer cutter accepts APKT 1604 indexable inserts; the designation matches widely used Korloy inserts for easy procurement. What clamping hardware is specified for insert fastening? Insert clamping is achieved with an M4x10 Torx screw; a T15 key is used to tighten and release the insert seat. What shank and length dimensions should be considered for setup? The tool features a 48 mm shank and a 50 mm overall length, which supports rigid mounting and reduced overhang in most milling setups. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise chamfering with a robust 60 mm shank and a wide 86 mm cutting diameter; the cutter’s 60° geometry and six cutting edges combine stability and efficient material removal. Purchase or request expert advice via Metav Werkzeuge for tailored application support. Chamfer mill T455TM — indexable chamfer cutter with 60° cutting angle (Teknik Makina) The Chamfer mill T455TM is an indexable chamfering cutter for industrial chamfer and bevel operations, compatible with APKT 1604 inserts and designed for stable mounting on a 60 mm shank. 60° cutting angle for accurate chamfers Compatible with APKT 1604 indexable inserts 86 mm maximum cutting diameter 6 cutting edges for smooth material removal Faster, more consistent chamfering through engineered geometry The milling head’s 60° cutting angle is engineered to produce uniform chamfers with predictable material removal rates. By combining a large effective diameter (86 mm) with a stable 60 mm shank, the tool reduces vibrations and improves surface quality during high-volume runs. This geometry allows the cutter to maintain cutting engagement and distribute load across multiple cutting edges, resulting in a repeatable finish and fewer rework cycles for production parts. Cost-efficient insert system and straightforward maintenance Equipped for APKT 1604 inserts and compatible with Korloy insert grades, the cutter supports rapid index changes and simple inventory management. The tool is secured with M4x10 Torx screws and associated T15 key, enabling quick, toolroom-friendly insert replacement. For workshops seeking uptime, the indexable system reduces tooling costs per component and shortens maintenance intervals without specialised fixtures. Robust build for industrial duty and reliable handling With six cutting edges and a mass of 0.892 kg, this cutter balances rigidity with handling convenience. The combination of multiple edges and stable attachment minimises chattering and extends insert life by sharing wear. The tool’s overall length of 50 mm contributes to a compact setup, lowering cantilever forces on the spindle and promoting safer, higher-precision machining in repetitive chamfering tasks. Suitable for workshop and light production environments Designed for consistent chamfer production, the cutter is a pragmatic choice for CNC and milling centres that require dependable indexable tooling. Backed by Teknik Makina engineering and available through Metav Werkzeuge, the cutter benefits from broad aftermarket support and compatible insert availability. Metav’s distribution model focuses on dependable supply and industry-grade quality control, supporting efficient procurement and steady workshop operation. Contact Metav Werkzeuge for application-specific recommendations on Teknik Makina chamfering cutters and to arrange prompt delivery from Emmerich. Technical data Article number: T455TM Core specifications Maximum cutting diameter: 86 mm Shank diameter: 60 mm Overall length: 50 mm Number of cutting edges: 6 Weight: 0.892 kg Cutting angle: 60° Features and compatibility Insert type: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key: T15 FAQ Which insert type does the cutter accept? The cutter accepts APKT 1604 indexable inserts; compatible grades from Korloy are suitable for typical chamfering applications. What is the maximum cutting diameter of the tool? The maximum cutting diameter is 86 mm, allowing broad chamfer widths while retaining stability via the 60 mm shank. What shank size is required for mounting? A 60 mm shank diameter is specified for secure mounting and reduced vibration during operation. Are fastening screws and the key included? The tool is specified with M4x10 Torx screws and a T15 key for insert fixing and replacement. Is the cutter suitable for high-volume production? The cutter’s indexable design and 6 cutting edges make it appropriate for repetitive chamfering tasks in workshop and light production settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust toolholding, a defined 75° chamfer geometry and easy insert replacement for consistent edge finishes and reduced setup time; order the component via Metav Werkzeuge or contact the consultants for tailored advice. Chamfer mill T458TM — 75° cutting angle, 60 mm shank (Teknik Makina) A chamfer mill T458TM designed for precision edge chamfering in industrial machining, compatible with APKT 1604 indexable inserts 75° cutting angle for precise chamfers Compatible with APKT 1604 indexable inserts 60 mm shank for stable toolholding Six cutting edges for efficient material removal Consistent chamfer geometry for reliable production The T458TM delivers a defined 75° cutting angle, engineered to produce repeatable chamfers with minimal setup variance. The combination of a rigid 60 mm shank and a compact overall length of 50 mm stabilises the tool in the holder, reducing vibration and improving surface finish. With six cutting edges arranged to share the load, wear is distributed evenly, which extends insert life and sustains process reliability. This configuration supports lean production by lowering the frequency of rework and by helping to maintain tolerances across batch runs. Efficient indexable system that speeds up changeover Designed around indexable inserts APKT 1604 (compatible with Korloy), the cutter reduces downtime through quick insert indexing and replacement. The indexable system permits consistent edge geometry without complex regrinding, which simplifies tool management in busy workshops and small production lines alike. The combination of multiple cutting edges and replaceable inserts enhances throughput and provides a predictable cost-per-edge metric for job costing and process planning. Serviceable design with clear maintenance steps Insert retention uses a Torx screw specification M4x10 and the required key size is T15, enabling straightforward replacement and secure clamping. The tool's balanced mass (approx. 1.256 kg) and robust construction aid in stable cutting performance, while the compatibility with Korloy inserts broadens sourcing options for spares. For traceability and ordering, reference T458TM and Teknik Makina when selecting holders or replacement parts; the model’s design supports routine maintenance without specialised fixtures. For tailored technical advice on integrating the Teknik Makina chamfer mill into existing tool setups or to confirm suitability for a specific application, contact Metav Werkzeuge in Emmerich for expert guidance and stock information Technical data Article number: T458TM Manufacturer: Teknik Makina Insert type: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key: T15 Core specifications Cutting angle: 75° Shank diameter: 60 mm Overall length: 50 mm Cutting edges: 6 Weight: 1.256 kg Max. cutting diameter: 94 mm Nominal diameter: 35 mm Features & versions Compatible with indexable inserts APKT 1604 Insert supplier compatibility: Korloy Secure clamping via M4x10 Torx screw Balanced design for reduced vibration FAQ What insert type is required for this chamfer cutter? The cutter is specified for APKT 1604 indexable inserts; compatibility with Korloy inserts is indicated and recommended for optimal fit and performance. Which toolholder diameter does the cutter require? This tool uses a 60 mm shank for rigid mounting and stable toolholding during chamfering operations. How many cutting edges are provided and what is the benefit? The tool features six cutting edges, which distribute wear across multiple cutting faces and increase effective machining time between indexings. What is the specified cutting angle and what does it mean for applications? A 75° cutting angle provides a defined chamfer geometry suitable for standard edge preparation tasks, delivering consistent results for assemblies requiring controlled edge breaks. Which fastener and key are needed for insert changes? Insert retention uses an M4x10 Torx screw and requires a T15 Torx key for secure and repeatable replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, performance-focused tool head that combines precise geometry and internal coolant for cleaner cuts and longer insert life; order directly via Metav Werkzeuge or request tailored advice from our consultants. Corner Tool Head T964TM — 35 mm, internal coolant, for BOMT 1304 indexable inserts (Teknik Makina) The Corner Tool Head T964TM is a compact 35 mm tool head designed for precision indexable-insert turning and profiling, compatible with BOMT 1304 inserts and equipped with internal coolant to support stable cutting conditions. 35 mm diameter for compact tool holders Internal coolant channel for improved chip evacuation Compatible with BOMT 1304 indexable inserts Four cutting edges for extended indexing life Predictable accuracy in confined spaces The compact 35 mm diameter and short overall length create a rigid set-up that reduces vibration and runout, enabling consistent results in tight tool stations. With an overall length of 35 mm and a mass of 0.128 kg, the head is intended for applications where space and stiffness are critical. The geometry is optimised for use with BOMT 1304 indexable inserts, which are widely available in negative-rake grades and provide reliable cutting edges for metal-removal tasks. This combination supports repeatable tolerances and reduced rework in production environments. Cooler cutting and improved surface quality An integrated internal coolant channel delivers cutting fluid directly to the cutting edge, which lowers cutting temperatures and enhances chip control. By guiding coolant to the insert contact zone, the system helps maintain tool edge integrity and can improve surface finish on the workpiece. For shops that process mixed batches, this feature contributes to longer insert life and fewer unscheduled index changes, translating into steadier throughput and less operator intervention during extended cycles. Fast indexing and robust clamping for uptime The head uses a Torx T10 drive and M3.5x8.5 fastening screw to secure inserts reliably while enabling fast replacement and accurate seating. With four cutting edges available per insert, the setup supports multiple indexings before a full replacement is required, lowering consumption and downtime. The fastening design is manufactured to withstand typical turning forces and preserve insert position, which is essential for maintaining dimensional consistency across serial parts. Seamless compatibility for workshop integration Designed for compatibility with inserts from Ingersoll and the BOMT 1304 family, the tool head integrates into standard lathe tool posts and holder systems with minimal adaptation. The compact format makes it suitable for turning, profiling and light grooving operations in both small-batch workshops and larger production lines. Supplied by Teknik Makina under the SKU T964TM, the head is a practical choice where predictable index life, coolant delivery and compactness are required for efficient machining cycles. Contact Metav Werkzeuge for tailored technical guidance and to secure the Teknik Makina T964TM with internal coolant for optimised machining performance — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T964TM Manufacturer: Teknik Makina Article: Corner tool head for BOMT 1304 indexable inserts Facts Diameter: 35 mm Overall length: 35 mm Weight: 0.128 kg Cutting edges: 4 Screw: M3.5x8.5 (Torx T10) eClass: 21181015 Special features Internal coolant Compatible with BOMT 1304 indexable inserts Compatible insert manufacturer: Ingersoll FAQ What insert type does the head accept? The head accepts BOMT 1304 indexable inserts; it is designed to seat these inserts securely for turning and profiling operations. Is the coolant internal or external? The tool head features internal coolant, supplying fluid directly to the cutting zone to improve chip control and tool life. How many usable cutting edges are available per insert? Inserts used with this head provide four cutting edges, allowing multiple indexings before replacement. Which fastening system secures the inserts? Inserts are fastened using a Torx T10 drive and an M3.5x8.5 screw for reliable clamping and straightforward replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precision shank milling cutter that combines compatibility with ADKT 1505 indexable inserts, a 35 mm cutting diameter and a robust 25 mm shank for stable toolholding — order directly via Metav Werkzeuge or contact the consultants for specification support. S308TM Shank milling cutter — 35 mm diameter, for ADKT 1505 indexable inserts (Teknik Makina) S308TM is a shank milling cutter designed for high-efficiency indexable-insert milling in CNC applications, compatible with ADKT 1505 inserts for consistent chip formation and quick insert changes. For ADKT 1505 indexable inserts (ISCAR compatible) 35 mm cutter diameter 25 mm shank diameter, 120 mm overall length Precision insert compatibility for repeatable results The indexable inserts concept enables rapid tool changes and consistent edge geometry across production runs. Matched to ADKT 1505 inserts and compatible with ISCAR systems, this milling tool supports predictable cutting behaviour and reduced setup time. The modular insert design separates the cutting edge from the tool body, lowering ongoing tooling costs and simplifying maintenance without sacrificing repeatability. Stable shank and optimised geometry for higher material removal With a 25 mm shank and 120 mm overall length, the cutter offers rigid clamping and controlled overhang, improving stability during aggressive passes. The three cutting edges and a 35 mm diameter provide balanced chip distribution and smoother radial engagement, which together reduce vibration and extend insert life. The tool is supplied with a Torx M4x10 screw and requires a T15 key for secure insert fastening, ensuring reliable clamping torque and secure seat location. Practical benefits on the machine and in process planning The tool geometry is tuned for efficient chip evacuation and predictable surface finish, making it suitable for a range of milling tasks on medium-duty CNC machines. Operators benefit from shorter tool-change cycles and consistent surface quality, while process planners gain the ability to rely on standardised insert types for easier inventory and cost control. The lightweight construction (approx. 0.5 kg) keeps spindle loads moderate, supporting longer cycle times without unnecessary mechanical strain. Suitable applications and productivity gains Ideal for batch production and job-shop environments that favour insert-based tooling, this cutter supports fast indexable-insert swaps and repeatable part quality. The combination of a rigid shank, defined cutting length and standardised insert compatibility helps reduce downtime and improves throughput on milling operations where changeover speed and consistent results matter most. Specification-driven buyers will appreciate the clear mechanical data and the compatibility with established insert systems. For a production-ready milling solution from Teknik Makina, request the S308TM specification sheet or technical advice from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and supply options. Technical data Article number: S308TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 35 mm Cutting edges: 3 Shank diameter: 25 mm Cutting length (shank): 45 mm Overall length: 120 mm Weight: 0.5 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10, Torx key T15 SKU: S308TM FAQ What insert type is required for this cutter? The cutter uses ADKT 1505 indexable inserts; it is compatible with ISCAR-style inserts designed for that seat form. Can the tool be used on standard CNC milling spindles? Yes, the shank design and 25 mm diameter make the tool suitable for common milling spindle holders that accept a 25 mm straight shank. How many cutting edges does the milling cutter have and what is the benefit? The tool has three cutting edges, which improves chip balance and permits smoother cutting engagement compared with fewer-edge variants. Is the cutter supplied with fastening hardware? The S308TM is supplied with a Torx M4x10 screw specification and requires a T15 key for insert clamping. What applications benefit most from this cutter? Batch milling, slotting and light face milling operations where fast insert changes, predictable surface finish and indexable-insert economics are priorities will benefit most. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, a 35 mm cutting diameter, and secure Torx fastening for consistent, high-efficiency milling — order directly via Metav Werkzeuge or consult our specialists for integration advice. Shank Cutter S262-1TM — 35 mm, internal coolant, for AP--1604 indexable inserts (Teknik Makina) A Shank Cutter S262-1TM engineered for reliable indexable-insert milling in versatile production environments, optimised for cooling and secure insert clamping. 35 mm cutting diameter Internal coolant through shank Compatible with Korloy AP--1604 inserts Shank diameter 25 mm, 120 mm overall length Precision cooling for sustained cutting performance Equipped with internal coolant, this shank cutter maintains stable cutting temperatures across longer cycles, reducing thermal distortion and extending insert life. The integrated cooling channel supports efficient chip evacuation and coolant delivery directly to the cutting zone, which improves process reliability and enables consistent dimensional results. Combined with the Korloy AP--1604 insert system, the tool is set up for repeatable performance in repetitive production runs. Robust clamping and balanced shank design for steady cuts A shank diameter of 25 mm and a compact mass of 0.498 kg deliver mechanical stiffness and reduced vibration during machining, which contributes to improved surface finish and tool life. The head secures inserts with an M4x10 Torx screw (Torx key T15) for straightforward servicing and reliable seating. The cutter’s three cutting edges provide a balance between material removal rate and smooth cutting action, making it suitable for routines that demand predictable cyclical output. Compact dimensions for straightforward integration into toolsets With a 120 mm overall length and a 45 mm cutting length, this cutter is designed to fit common toolholder setups without unnecessary overhang, improving rigidity and minimising deflection. The combination of compact geometry and indexable inserts helps workshops reduce downtime: replacement involves only the insert and screw rather than the whole cutter body. The configuration supports a practical, modular approach to tooling that aligns with standard set-ups in modern milling cells. Contact Metav Werkzeuge for a machining consultation and reserve the Teknik Makina S262-1TM to benefit from optimised cooling and secure AP--1604 insert clamping Technical data Article number: S262-1TM Product type: Schaftfräser Eclass: 21180806 Manufacturer: Teknik Makina Facts Cutting diameter: 35 mm Shank diameter: 25 mm Overall length: 120 mm Cutting length (shank): 45 mm Weight: 0.498 kg Number of cutting edges: 3 Torx key: T15 Torx screw: M4x10 Internal coolant: yes Special features Compatible with AP--1604 indexable inserts Insert manufacturer: Korloy Designed for indexable-insert milling Label: 35mm Schaftfräser AP-- 1604 L120mm mit Innenkühlung FAQ Which inserts fit this cutter? The cutter accepts AP--1604 indexable inserts; it is delivered as the Shank Cutter S262-1TM configured for Korloy AP--1604 inserts. Is there through-shank cooling? Yes, the S262-1TM features internal coolant to direct fluid to the cutting edge for improved temperature control. What is the shank diameter and overall length? The tool has a 25 mm shank diameter and an overall length of 120 mm, suitable for many standard toolholders. How many cutting edges does the cutter have and how are inserts fastened? The cutter uses three cutting edges and secures inserts with an M4x10 Torx screw, tightened using a T15 Torx key. Is the tool suitable for repetitive production runs? The combination of internal coolant, indexed insert system and robust shank makes the S262-1TM well suited to repetitive machining tasks that require consistent results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise geometry and straightforward insert compatibility for dependable milling results; the robust shank and 65 mm cutting length deliver stability in long-cycle work. Order the S438TM directly via Metav Werkzeuge or consult the specialists for application advice. S438TM Shank milling cutter for APKT 1604 indexable inserts, Ø35 mm, 3 cutting edges — Teknik Makina A practical S438TM shank milling cutter designed for indexable-insert milling with APKT 1604 inserts, intended for industrial and workshop CNC operations that require predictable, repeatable cutting performance Ø35 mm cutting diameter for wider material removal Compatible with APKT 1604 inserts by Korloy 3 cutting edges for stable, efficient milling High, consistent material removal with controlled geometry The tool body offers a Ø35 mm cutting diameter paired with a 65 mm cutting length, creating a balance between reach and rigidity that supports steady material removal. A 90° cutting angle produces largely perpendicular faces, which is beneficial where dimensional control of the machined surface is required. The three-edge configuration delivers fewer interruptions per revolution than multi-edge designs, helping to maintain consistent cutting forces and reducing chatter during interrupted cuts. These design elements combine to provide predictable cycle times in series production. Quick insert changes and secure clamping to reduce downtime Designed for use with APKT 1604 indexable inserts, the cutter accepts standard inserts from Korloy, enabling rapid replacement without lengthy regrinds. The clamping is effected via an M4x10 Torx screw engaged with a T15 key, a common fastener standard that simplifies maintenance procedures and minimises tool-change time. Indexable inserts remove the need to resharpen tools on site; worn cutting edges are replaced quickly, restoring full cutting geometry and maintaining process capability with minimal interruption. Robust shank dimensions and overall balance for reliable toolholding A 32 mm shank diameter and 250 mm overall length are chosen to provide reliable mounting in standard toolholders while offering sufficient reach for many milling tasks; the cutter weight of 1.567 kg reflects a solid construction that aids stability. The shank design focuses on secure clamping to reduce axial and radial runout, which supports repeatable positioning and contributes to consistent surface finish and tool life. The combination of shaft stiffness and cutter geometry suits a broad range of industrial milling setups where repeatability and machine time utilisation are priorities. Contact Metav Werkzeuge today for tailored application guidance on the S438TM shank milling cutter and to check current availability; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: S438TM Manufacturer: Teknik Makina Product type: Shank milling cutter for APKT 1604 indexable inserts Bezeichnung (English): for APKT 1604 Indexable Inserts Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length: 65 mm Overall length: 250 mm Cutting edges: 3 Cutting angle: 90° Weight: 1.567 kg Torx screw: M4x10 Torx key: T15 Special features Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Indexable-insert system for quick edge replacement Robust shank for standard toolholders FAQ What inserts fit this cutter? The cutter accepts APKT 1604 indexable inserts; inserts from Korloy are specified as compatible with the S438TM. How is the insert secured? Inserts are clamped with an M4x10 Torx screw; a T15 key is used to tighten and loosen the screw for maintenance. What is the effective cutting length? The tool offers a 65 mm cutting length, enabling deeper axial engagement when required while maintaining rigidity. Which shank size is required for toolholding? A toolholder compatible with a 32 mm shank diameter is required to mount the cutter securely. Is the cutter suitable for quick changeover in production? Yes, the indexable-insert concept combined with the standard Torx clamping enables rapid insert changes and short downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine rapid material removal with secure clamping and straightforward insert replacement to keep production running reliably; benefit from a compact tool body and proven indexable-insert compatibility. Order the S154TM directly via Metav Werkzeuge or consult the technical team for machining advice. Shaft milling cutter S154TM — 35 mm, 4‑cut, for APXT 1003 indexable inserts (Teknik Makina) The Shaft milling cutter S154TM is an indexable insert cutter designed for robust side and face milling tasks where quick insert changes and repeatable results are required 35 mm cutting diameter 4 cutting edges for fast material removal Compatible with APXT 1003 inserts (Korloy) Ø25 mm shank, 30 mm cutting length Increased productivity from a compact indexable solution The S154TM is built to deliver efficient chip removal and sustained cutting performance. With a 35 mm diameter and 4 flutes, the tool reduces machining passes while maintaining stability at typical milling feeds. The 90° cutting angle gives a neutral cutting action suitable for facing and shoulder operations, which helps to shorten cycle times on batch and CNC production runs. Because the cutter accepts APXT 1003 indexable inserts, insert geometry and grade can be selected to match the workpiece material, enabling consistent surface quality while lowering per-part tooling costs. Secure clamping and repeatability for consistent part quality A stout Ø25 mm shank and a 30 mm cutting length create a stable connection between spindle and cutter body, which supports repeatable results across runs. Insert retention is managed with a M2.5×5.5 Torx screw tightened with a T8 key, providing reliable clamping and simple replacement during tool changes. The assembly weight of 0.452 kg and compact overall length of 100 mm mean the cutter integrates easily into standard tool magazines and holders while limiting overhang-related vibration. These characteristics translate into fewer rejects and less time spent on rework. Simplified workshop logistics and lower downtime Compatibility with Korloy APXT 1003 inserts streamlines inventory: a single insert family covers multiple operations when paired with this cutter body, reducing storage complexity. The indexable system permits quick on-machine insert swaps, minimising downtime and making scheduled maintenance predictable. For procurement and supply, Metav Werkzeuge provides centralised availability and a clear quality filter from Emmerich, supporting continuous supply for workshops and industrial customers alike. Technical advisors can be consulted for matching insert grades to specific machining tasks and to plan replacement cycles that keep production steady. Contact Metav Werkzeuge for tailored tooling recommendations and prompt supply from Emmerich—technical consultants are available to assist with insert selection and integration into production workflows Technical data SKU: S154TM Brand: Teknik Makina Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2,5x5,5 Torx key: T8 Facts Diameter: 35 mm Cutting edges: 4 Overall length: 100 mm Shank diameter: Ø25 mm Cutting length: 30 mm Weight: 0.452 kg Cutting angle: 90° Special features Indexable insert cutter body Secure Torx retention system Compact tool length for reduced overhang Designed for APXT 1003 insert range FAQ Which inserts fit this cutter? The S154TM accepts APXT 1003 indexable inserts; compatibility with Korloy inserts is specified for straightforward procurement and grade selection. What clamping hardware is required to change an insert? Insert clamping on the S154TM is performed with the supplied M2.5×5.5 Torx screw using a T8 key for secure and repeatable retention. Is the cutter suitable for standard milling spindles? Yes, the Ø25 mm shank of the S154TM matches common collet and shrink-fit holders; confirmation should be made against the machine’s tool holder spec. How can material suitability be determined? Material compatibility depends on the chosen APXT 1003 insert grade; the S154TM body is designed to work with insert grades optimised for a range of steels and non-ferrous materials as selected by the tooling advisor. What are the main benefits of choosing this indexable system? The S154TM offers rapid insert changes, reduced tooling inventory when using APXT 1003 inserts, and consistent part quality thanks to stable shank design and secure Torx clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable solution that combines precise clamp security and efficient stock removal — ideal for medium-duty milling operations. Benefit from the 35 mm cutting diameter and secure Torx fastening for predictable tool life; order the cutter directly via Metav Werkzeuge or ask our consultants for application advice. Shank-mounted cutter for RDMT 12T3 indexable inserts — 35 mm diameter, 3 cutting edges (Teknik Makina) A shank-mounted cutter engineered to hold RDMT 12T3 indexable inserts for face and shoulder milling in general workshop and light industrial environments. 35 mm cutting diameter Shank diameter 32 mm Three cutting edges for efficient stock removal Torx T15 fastening, M3.5 locking screw Faster machining with fewer interruptions The R248TM is configured for quick insert indexing and consistent material removal: its 35 mm cutting diameter combined with three cutting edges means fewer passes and a steady cut for many common milling tasks. Using indexable inserts such as RDMT 12T3 reduces downtime compared with brazed cutters because inserts can be rotated or replaced without regrinding. The result is a measurable gain in throughput and a simpler consumable management routine, helping to keep cycle times predictable in small-batch and series production. Rigid clamping for stable cuts and repeatable results Rigidity starts at the shank: the 32 mm shank diameter provides a solid connection to standard toolholders while the M3.5 locking screw and M3.5 x 8.5 Torx screw ensure repeatable, low-play insert clamping. The Torx key T15 allows controlled torque during assembly, reducing the risk of insert movement under load. Together these design choices support a steady cutting geometry, which helps maintain surface quality and reduces vibration-related wear on both tool and machine. Practical design for workshop handling and setup With an overall length of 200 mm and a cutting length of 45 mm, this shank-mounted tool balances reach and stiffness for typical through-cutter and shoulder operations. The cutter’s mass of 1.226 kg gives a feel of robust construction without unnecessary bulk, and the modular insert system simplifies inventory: keep a small stock of RDMT 12T3 inserts and several spare screws to keep the tool in service. The assembly is straightforward and suited to routine workshop maintenance, enabling fast reconditioning between jobs. Order the Teknik Makina shank-mounted cutter (R248TM) via Metav Werkzeuge for dependable supply and clear technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for product details and compatibility checks Technical data Article number: R248TM Product: Shank-mounted cutter for RDMT 12T3 indexable inserts Brand: Teknik Makina Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 200 mm Number of cutting edges: 3 Weight: 1.226 kg Special features Suitable for RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5 x 8.5 Torx key size: T15 ECLASS: 21180806 ETIM: EC011860 FAQ Which inserts fit this cutter? The cutter accepts RDMT 12T3 indexable inserts; R248TM is intended as a holder for that insert format. What are the key dimensions to check for toolholder compatibility? Relevant dimensions are the 32 mm shank diameter, 35 mm cutting diameter and 200 mm overall length for the R248TM head. How is the insert secured in the cutter? Insert retention uses a locking screw (M3.5) and a Torx screw M3.5 x 8.5; the specified key size is T15. Is the cutter suitable for face and shoulder milling? Yes — the combination of a 35 mm diameter and three cutting edges makes the tool appropriate for face and shoulder milling tasks when fitted with RDMT 12T3 inserts. What should be kept in stock to minimise downtime? Keep spare RDMT 12T3 inserts and replacement fastening screws (M3.5 / M3.5 x 8.5) on hand to allow rapid insert changes. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient material removal and consistent stability: the S448TM combines a Ø35 mm cutting diameter with a rigid 32 mm shank and a 65 mm cutting length for reliable deep milling. Benefit from fast insert changes and reduced downtime by using APKT 1604 indexable inserts. Order the tool directly via Metav Werkzeuge or consult our specialists for machining advice. S448TM — Indexable shank cutter for APKT 1604 inserts, Ø35 mm, 3 flutes (Teknik Makina) A robust S448TM shank cutter engineered for secure clamping of APKT 1604 indexable inserts, ideal for heavy-duty milling and general-purpose metal removal. Ø35 mm cutting diameter, 3 cutting edges 32 mm shank for high rigidity 65 mm cutting length for deep cuts Compatible with APKT 1604 inserts (Korloy) Stable cutting for consistent process performance The main advantage of this shank cutter is its combination of a 32 mm shank and a Ø35 mm cutting diameter, which together increase rigidity and reduce vibration during machining. Reduced chatter results in a smoother surface finish and longer insert life, making the tool suitable for continuous production runs. The cutter’s three-flute geometry balances shear efficiency and chip evacuation, enabling steady metal removal rates without compromising tool life. Faster cycles thanks to an indexable insert system Using APKT 1604 indexable inserts with the S448TM allows rapid insert changes and consistent cutting geometry across inserts. The clamping system is secured with an M4x10 Torx screw tightened using a T15 key, ensuring repeatable seat positioning and safe fixation. This arrangement lowers machine downtime compared with solid-carbide alternatives, while indexable inserts cut operating costs through economical replacement of only the cutting edges rather than the whole tool body. Designed for reliable handling and straightforward maintenance With a 65 mm cutting length and a total length of 300 mm, the tool offers reach for deeper pockets and shoulder milling while keeping a compact overall profile for stable clamping. The 90° cutting angle is optimised for general milling tasks, providing predictable axial forces and straightforward programming. The cutter’s net weight (approx. 1.879 kg) reflects a robust construction that supports precision in heavy cuts and contributes to a controlled process window. For tailored machining solutions with Teknik Makina tools, contact Metav Werkzeuge in Emmerich to discuss application-matched tooling and availability: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: S448TM Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 35 mm Shank diameter: 32 mm Cutting length: 65 mm Total length: 300 mm Cutting edges: 3 Weight: 1.879 kg Cutting angle: 90° Designs / Special features For APKT 1604 indexable inserts Compatible insert manufacturer: Korloy Torx screw M4x10 Torx key size: T15 FAQ Which insert type fits this cutter? The cutter accepts APKT 1604 indexable inserts; the S448TM is specified for this insert format for secure seating and correct geometry. Is the S448TM compatible with Korloy inserts? Yes, the S448TM is compatible with Korloy APKT 1604 inserts as stated in the product data. What fastening hardware is used for insert clamping? Insert clamping on the S448TM is performed using an M4x10 Torx screw and a T15 Torx key for repeatable fixation. What machining tasks suit this shank cutter? The cutter is optimised for general milling operations requiring rigidity and reach—shoulder milling and deeper pocket work are typical applications for this design. How does the cutter support production efficiency? By using indexable inserts and a robust 32 mm shank, the tool reduces downtime for tool changes and provides stable cutting conditions that extend insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com