Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact 35 mm diameter cutter with internal coolant and a rigid 32 mm shank for stable, repeatable milling cycles; order the tool directly via Metav Werkzeuge or consult our specialists for application planning. Shaft Cutter S272-1TM – indexable-insert milling cutter with internal coolant by Teknik Makina The Shaft Cutter S272-1TM is an indexable-insert milling cutter designed for precision milling with AP--1604 inserts, combining compact diameter and internal coolant for controlled metal removal in CNC and shop-floor operations. *35 mm cutter diameter for compact toolpaths *Internal coolant for improved chip evacuation *Compatible with AP--1604 indexable inserts by Korloy *32 mm shank with 3 cutting edges, robust design Consistent performance for precision milling The S272-1TM is engineered to deliver stable machining thanks to its 35 mm diameter and 32 mm shank, which reduce deflection during interrupted cuts. Using standard AP--1604 indexable inserts ensures quick edge changes and predictable surface finishes, while the compact geometry supports tight toolpaths on multi-axis machines. This configuration translates into shorter cycle times and fewer tool changes, improving production throughput without sacrificing dimensional control. Effective cooling and better surface quality Built-in internal coolant channels direct lubricant to the cutting zone, aiding heat dissipation and efficient chip evacuation. The result is reduced insert wear and a more consistent cutting edge life, which lowers unplanned downtime and rework. For operations where thermal stability affects tolerances, the focused coolant flow helps maintain target surface integrity and repeatability across batches. Robust clamping and straightforward maintenance A 3 cutting edge layout provides balanced cutting forces and smooth engagement, while insert clamping is secured with M4x10 Torx screws using a T15 driver, simplifying maintenance routines. The cutter’s 55 mm cutting length and 150 mm overall length offer a practical reach for many slotting and face-milling tasks, and the 0.915 kg mass contributes to inertial stability during heavy cuts. Quick insert indexing minimises setup time and keeps machine utilisation high. Practical advantages across workshops and production lines This indexable-insert cutter suits industrial and workshop environments requiring dependable repeatability and easy servicing. Its compatibility with Korloy AP--1604 inserts makes sourcing straightforward, and the tool’s design supports consistent results in jobbing and medium-series production. Combined with Metav’s supply and advisory capability, the tool is positioned to integrate into existing toolbanks with minimal adaptation. For tailored application advice or to secure a supply of the S272-1TM, contact Metav Werkzeuge for ordering and technical consultation directly through their advisory team Technical data Article number: S272-1TM Product: Indexable-insert milling cutter Compatible inserts: AP--1604 Manufacturer: Teknik Makina Facts Diameter: 35 mm Overall length: 150 mm Cutting length: 55 mm Shank diameter: 32 mm Number of cutting edges: 3 Weight: 0.915 kg Special features Internal coolant Compatible with Korloy AP--1604 inserts Torx screw M4x10 Torx key T15 Eclass: 21180806 FAQ Which indexable inserts fit this cutter? The cutter is designed for AP--1604 indexable inserts; compatibility with Korloy AP--1604 grades is specified for the S272-1TM. Does the tool provide internal coolant? Yes, the S272-1TM features internal coolant channels to deliver fluid directly to the cutting zone for improved chip control and tool life. How many cutting edges does the cutter have? The S272-1TM is equipped with three cutting edges, offering balanced cutting forces and smooth engagement. What screw and driver are used for insert clamping? Insert clamping uses M4x10 Torx screws tightened with a T15 driver on the S272-1TM. What are the key dimensions to consider for toolholding? Important dimensions are a 32 mm shank diameter, 35 mm cutter diameter and a 150 mm overall length for the S272-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a rigid 25 mm shank with a 5° cutting angle delivers stable internal turning and improved chip control, while compatibility with DC-- 11T3 indexable inserts reduces setup time and tooling complexity; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. S25R SDZCR Boring Bar – Right‑hand, Ø35 mm, 200 mm Length (Teknik Cutting Tools) The S25R SDZCR is a right‑hand boring bar designed for use with DC-- 11T3 indexable inserts, suited to precision internal turning tasks where rigidity and repeatable results are required Right‑hand orientation for standard setups Compatible with DC-- 11T3 indexable inserts Ø35 mm body, 200 mm overall length Greater rigidity for consistent internal finishes The solid shank construction with a shank diameter of 25 mm and an overall body diameter of 35 mm provides elevated stiffness during internal machining, reducing deflection under load. Higher rigidity translates into more consistent bore geometry and surface finish, particularly where tool overhang is constrained. For workshops seeking reproducible results on small to medium bores, the stiffer tool body minimises vibration and supports tighter tolerances, saving time on rework and inspection. Fast tool changes and predictable cutting behaviour Designed for indexable tooling, the bar accepts DC-- 11T3 inserts, enabling quick replacement and consistent seat location. Using indexable inserts simplifies inventory management and reduces downtime compared with brazed tooling, as worn cutting edges can be swapped without regrinding. The 5° cutting angle helps with controlled chip formation and smoother engagement at the insert nose, producing predictable cutting forces and aiding tool life management in cyclic production. Compact dimensions suited to internal machining setups With a 200 mm overall length and a measured cutting height of 32 mm, the bar balances reach and stability for a wide range of internal operations. The moderate length reduces unsupported overhang, allowing higher feed rates where machine rigidity permits. The listed weight of 0.816 kg reflects a compact construction that is straightforward to mount and index in standard toolholders, supporting efficient changeover in CNC or manual turret setups. Simple specification aids procurement and planning The bar carries the ISO style designation S25R SDZCR, clarifying the shank and cutter interface for toolroom specification. Compatibility details such as the accepted insert size (11) and the explicit designation for DC-- 11T3 inserts make tool selection transparent for purchasing and maintenance teams. Clear numeric data on diameters, shank size and length allows straightforward integration into tooling lists and process documentation, reducing the risk of mismatched components on the shop floor. For advice on integrating the Teknik Cutting Tools S25R SDZCR boring bar into existing tooling systems or to arrange supply via Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: K196TM ISO designation: S25R SDZCR Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Compatible inserts: DC-- 11T3 Orientation: right Insert size reference: 11 Weight: 0.816 kg Numbers / Core technical data Diameter: 35 mm Overall length: 200 mm Shank diameter: 25 mm Cutting height: 32 mm Cutting angle: 5° Design / Special features Indexable insert system: SDZCR for DC-- indexable inserts Right‑hand boring bar design ISO style designation for tool planning Compact weight and length for reduced overhang FAQ What insert type is required for this boring bar? The boring bar accepts DC-- 11T3 indexable inserts; the bar is specified for the SDZCR insert style to ensure correct seat and cutting geometry with the S25R SDZCR (SKU K196TM). Is the bar suitable for left‑hand operations? This model is manufactured with a right‑hand orientation; reverse‑direction machining would require a left‑hand equivalent rather than modifying the S25R SDZCR. What are the key dimensions to check for machine compatibility? Confirm the diameter 35 mm, shank diameter 25 mm and overall length 200 mm against turret or holder clearances before installation; these dimensions define reach and rigidity for the S25R SDZCR. How does the 5° cutting angle affect performance? The 5° cutting angle promotes controlled chip formation and less aggressive engagement, which can extend insert life and improve bore surface consistency when using the recommended DC-- 11T3 inserts. Can the bar be used with alternative insert manufacturers? The tool is specified for the SDZCR style and DC-- 11T3 geometry; alternative inserts must match those seat and clearance specifications to maintain stability and cutting performance. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of internal coolant and a secure M16 threaded mount with a robust three-edge geometry for stable, high-productivity milling. Order the cutter directly via Metav Werkzeuge or ask our consultants for technical integration advice. 35 mm Screw-in Milling Cutter VT166-1TM – M16 thread, internal coolant (Teknik Makina) A 35 mm screw-in milling cutter VT166-1TM engineered for AP-- 1604 indexable inserts, designed to deliver stable face and slot milling in precision workshop and production environments. 35 mm diameter, 60 mm overall length Internal coolant for reliable chip evacuation M16 thread, 24.5 mm thread height Three cutting edges for stable cutting Stable mounting for consistent chip removal and tool life The M16 threaded shank with a 24.5 mm thread engagement ensures a secure clamping interface that reduces runout and vibration during milling. Combined with the three-edge cutter geometry and a 24 mm cutting-edge height, this configuration provides a consistent cutting line and predictable wear behaviour, enabling repeatable part quality and fewer reworks. The design supports efficient material removal while maintaining dimensional accuracy in repetitive production tasks. Coolant-through design to improve performance and surface finish The integrated internal coolant channel directs cutting fluid close to the cutting zone, improving cooling and chip evacuation. This reduces thermal loading on the insert and helps preserve edge integrity for longer tool life. In practice, the coolant-through capability contributes to a more consistent surface finish and fewer built-up edges when machining under demanding conditions, translating into higher throughput and reduced downtime for insert changes. Compatible system for quick indexable-insert changes Designed for the AP-- 1604 indexable inserts, the cutter accepts Korloy-manufactured inserts and uses a standard M4x10 Torx screw (Torx T15) for secure clamping. The standardised fixing method simplifies spare-part management and shortens changeover times on the shop floor. Quick, reliable insert replacement and a familiar fastener standard help to keep setup and maintenance straightforward in mixed-tool environments. Ready for integration into production workflows With an overall length of 60 mm and a mass of 0.211 kg, the tool is compact to store and easy to handle during tool changes. The combination of a proven screw-in interface, coolant-through capability and a three-edge cutting geometry supports both single-part precision work and higher-volume milling tasks. For tailored advice on adapting the cutter to existing toolholders or tool systems, Metav Werkzeuge offers technical guidance and workshop-proven recommendations. Contact Metav Werkzeuge in Emmerich for personalised advice on integrating the Teknik Makina VT166-1TM into production — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: VT166-1TM Manufacturer: Teknik Makina Product: Screw-in milling cutter (Einschraubfräser) Facts Diameter: 35 mm Overall length: 60 mm Weight: 0.211 kg Thread: M16 Thread height: 24.5 mm Cutting-edge height: 24 mm Number of cutting edges: 3 Special features Internal coolant (coolant-through) For AP-- 1604 indexable inserts Compatible with Korloy inserts Torx screw M4x10 (Torx T15) FAQ Which inserts fit this cutter? The cutter is designed for AP-- 1604 indexable inserts, compatible with Korloy-manufactured inserts and matching the VT166-1TM clamping geometry. Does the tool provide coolant-through capability? Yes, the VT166-1TM features internal coolant, which improves chip evacuation and cooling at the cutting edge. What mounting thread is required for installation? Installation requires an M16 threaded female seat; the tool provides a 24.5 mm thread engagement for secure mounting. How many cutting edges and what edge height does it have? The tool has three cutting edges with a cutting-edge height of 24 mm to support stable material removal. Which fastener and driver are used for insert clamping? Insert clamping uses an M4x10 Torx screw tightened with a Torx T15 driver Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines reliable mounting, proven insert compatibility and quick maintenance for consistent milling results — order directly via Metav Werkzeuge or consult our specialists for application advice. VT194TM screw-in milling cutter by Teknik Makina — M16 thread, Ø 35 mm, for BLMP 0603 indexable inserts A VT194TM screw-in milling cutter engineered for secure, repeatable milling with BLMP 0603 indexable inserts in toolroom and production environments M16 thread, Ø 35 mm cutting diameter For BLMP 0603 indexable inserts 2 cutting edges, 25 mm cutting height Supplied with M3x6.5 Torx screw Robust mounting and proven insert compatibility for continuous production The tool body is designed for a stable connection to the spindle via an M16 thread, providing a compact mounting with low runout that supports repeatable results. Compatibility with BLMP 0603 indexable inserts (Taegutec) ensures access to a wide range of grades and geometries, enabling adaptation to different materials and cutting conditions. The combination of a defined mounting standard and standardised inserts reduces setup time and simplifies spare-part management on the shop floor, which improves throughput and lowers the risk of production stops. Efficient cutting performance with easy serviceability Two precisely ground cutting edges and a 25 mm cutting height deliver balanced material removal while maintaining a conservative chip load per edge, which is beneficial for both roughing and finishing passes. The tool’s 100° cutting angle supports secure chip evacuation and stable cutting forces, helping to maintain surface quality and dimension stability. Fast insert replacement is facilitated by the supplied Torx M3x6.5 screw and the matching T8 key, so routine maintenance is straightforward and downtime is reduced. Lightweight, compact design for improved tool handling and spindle life With an overall length of 65 mm and a mass of only 0.044 kg, the cutter imposes minimal inertial load on the spindle while retaining sufficient stiffness for many common milling operations. The relatively small diameter of Ø 35 mm keeps the tool envelope compact, making it suitable for installations with limited clearance or for multi-tool setups. Reduced mass helps to lower vibration tendencies and contributes to longer bearing life, a practical benefit for shops prioritising reliability and predictable tool behaviour. Practical features geared towards workshop convenience The cutter features a M16 thread engagement depth of 25 mm and two-cutting-edge geometry that simplifies regrinds and inventory control. Its design supports the use of Taegutec BLMP 0603 inserts, which are widely available and manufactured in multiple grades, allowing optimisation for aluminium, steel or harder alloy operations where appropriate. The overall package is aimed at users seeking a compact, serviceable milling head that integrates quickly into existing tool systems and replacement cycles. Contact Metav Werkzeuge to discuss how the Teknik Makina VT194TM screw-in milling cutter with M16 mounting and BLMP 0603 compatibility can streamline tooling inventory and reduce changeover time Technical Data Article number: VT194TM Brand: Teknik Makina SKU: VT194TM Measured Data Diameter: 35 mm Thread: M16 Overall length: 65 mm Cutting height: 25 mm Thread length: 25 mm Number of cutting edges: 2 Cutting angle: 100° Weight: 0.044 kg Materials & Special Features Suitable for BLMP 0603 indexable inserts Compatible insert maker: Taegutec Torx screw: M3x6,5 Torx key: T8 FAQ What inserts fit this screw-in milling cutter? The VT194TM is designed for BLMP 0603 indexable inserts, compatible with Taegutec grades suitable for a range of materials. Which thread and diameter does the tool use? The cutter uses an M16 thread and a cutting diameter of 35 mm, providing a compact mounting solution. How many cutting edges are fitted and what is the cutting height? The milling head has 2 cutting edges and a cutting height of 25 mm, offering a balance between material removal and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust process reliability and fast indexable-insert changes with integrated coolant for consistent production. Order the VT194-1TM screw-in milling cutter via Metav Werkzeuge or contact the consultants for a suitability check. VT194-1TM 35 mm screw-in milling cutter for BLMP 0603 – internal coolant, M16 thread (Teknik Makina) VT194-1TM is a screw-in milling cutter designed for high-efficiency indexable-insert milling with BLMP 0603 inserts, suitable for industrial CNC applications where secure mounting and coolant delivery are essential 35 mm cutting diameter Internal coolant supply M16 screw-in connection Compatible with BLMP 0603 inserts Consistent material removal with reduced rework The threaded milling head delivers a 35 mm cutting diameter combined with 5 cutting edges, allowing high metal removal rates while maintaining surface quality. The head is engineered to distribute cutting forces evenly, which reduces vibrations and supports predictable tool life. Internal coolant is routed through the body to the cutting zone, improving chip evacuation and reducing thermal loads; this feature translates into fewer interruptions for tool changes and lower scrap rates on serial runs. Secure mounting and rapid insert service to minimise downtime A robust M16 screw-in connection with a 25 mm thread engagement is provided to ensure concentricity and repeatable reinstallation after service. The design uses a Torx fastening system (Torx key T8, screw M3x6.2) for the clamping of the insert seat, enabling quick, secure access for indexable-insert replacement. Compatibility with BLMP 0603 inserts from established manufacturers such as Taegutec reduces inventory complexity and simplifies maintenance routines, so changeovers are faster and less error-prone. Compact design for versatile machine integration With a total length of 65 mm and a lightweight construction of 0.24 kg, the milling head is suited to many machine configurations where reach and balance are considerations. The cutter’s compact profile supports high-speed indexing and reliable spindle dynamics without excessive overhang. The assembly is designed so that the toolholder interface remains standardised; this assists in predictable tool offsets and straightforward programming adjustments within existing CNC setups. Contact Metav Werkzeuge today to confirm whether the Teknik Makina VT194-1TM matches the production needs and to arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT194-1TM Manufacturer: Teknik Makina Product type: screw-in milling cutter Compatible indexable inserts: BLMP 0603 (Taegutec) Dimensions & performance Diameter: 35 mm Total length: 65 mm Thread: M16 Thread engagement height: 25 mm Cutting edges: 5 Cutting-edge height: 40 mm Weight: 0.24 kg Special features & mounting Internal coolant Torx key: T8 Torx screw: M3x6.2 SKU: VT194-1TM Manufacturer designation: Teknik Makina FAQ Which indexable inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; the VT194-1TM is specified for BLMP 0603 geometries and is compatible with Taegutec inserts of that type. Is coolant delivered to the cutting edge? Yes, the VT194-1TM features internal coolant routed to the cutting zone to support chip evacuation and temperature control during milling. How is the cutter mounted to the arbor or spindle? The cutter uses an M16 screw-in connection with 25 mm engagement; the insert clamping uses a Torx screw (M3x6.2) tightened with a T8 key for secure installation. What are the key dimensions for fixture planning? Key dimensions are 35 mm diameter, 65 mm total length and 25 mm thread engagement; the tool weight is 0.24 kg, which helps with balance and offset calculations. Can the cutter be used across different CNC machines? The VT194-1TM is designed for machine spindles or toolholders that accept an M16 screw-in head; verify that the machine accepts M16-threaded milling heads before use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 35 mm diameter and four cutting edges for stable, productive machining; the compact 65 mm overall length keeps setups collision-free while the screw-in interface ensures secure clamping. Order the tool through Metav Werkzeuge for reliable delivery or consult our specialists for application guidance. VT267TM 35 mm Screw-in Milling Cutter — for BLMP 0904 Indexable Inserts (L65 mm) The VT267TM screw-in milling cutter is a compact, indexable-head tool engineered for high-efficiency face and shoulder milling with BLMP 0904 inserts in demanding production environments. 35 mm cutter diameter Compatible with BLMP 0904 inserts Four cutting edges for balanced cutting 65 mm overall length for compact setups Repeatable metal removal with stable cutting geometry The design delivers consistent chip formation thanks to its balanced head and four cutting edges, which reduce vibration and promote uniform wear. Using indexable inserts simplifies tool management: worn inserts are replaced quickly without regrinding, restoring cutting performance in minutes. The screw-in interface secures the head into the holder with a defined thread profile, improving concentricity and run-out control for predictable surface finishes and tighter tolerances. Compact form for tight tool envelopes and dynamic balance With an overall length of 65 mm and a cutter diameter of 35 mm, the configuration was conceived for machines and fixtures with limited clearance. The 40 mm cutting-edge height and a thread engagement of 25 mm provide enough support for axial loads while keeping the centre of mass close to the spindle—beneficial for faster acceleration and reduced chatter. The tool’s modest mass (approx. 0.234 kg) aids spindle dynamics and minimises unproductive toolpath constraints, permitting faster cycle times in many setups. Secure clamping and simple maintenance to reduce downtime Clamping integrity is achieved with a robust thread (size 16) and high-quality fastening hardware: the head is retained using a M3.5x8.5 Torx screw, tightened with a Torx T10 key for reproducible torque. Compatibility with inserts from established suppliers such as Taegutec means a wide choice of grades and geometries for different materials and cut conditions. The VT267TM toolhead style shortens changeover time and supports continuous production through straightforward serviceability. For consistent, compact and easily maintainable cutting performance from Teknik Makina, contact Metav Werkzeuge to confirm fitment and select the optimal BLMP 0904 insert grade for the application — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: VT267TM Label: 35mm Einschraubfräser BLMP 0904 L65mm Manufacturer: Teknik Makina E-class: 21180806 Core specifications Diameter: 35 mm Overall length: 65 mm Thread size: 16 Thread engagement height: 25 mm Cutting edges: 4 Cutting-edge height: 40 mm Fastening screw: M3.5x8.5 Torx key: T10 Weight: 0.234 kg Compatibility & features For BLMP 0904 indexable inserts Compatible inserts manufacturer: Taegutec Product type: Screw-in milling cutter SKU: VT267TM Category path: Zerspanen > Einschraubfräser FAQ What insert type fits this cutter? The VT267TM is designed for BLMP 0904 indexable inserts, and compatible grades from Taegutec are commonly used for a broad range of materials. Can the cutter be used in compact machine setups? Yes, the 65 mm overall length and 35 mm diameter of the tool make it suitable for compact tool envelopes and reduced collision risk in congested fixtures. How is the head secured to the holder? The head of the VT267TM is fixed by a threaded screw interface (thread size 16) and retained with a M3.5x8.5 Torx screw tightened with a T10 key for reproducible clamping. How many cutting edges does the tool have and what’s the benefit? This screw-in milling cutter has four cutting edges, providing balanced cutting forces that help lower vibration and improve surface finish consistency. Is the cutter compatible with inserts from other manufacturers? The VT267TM is specified for BLMP 0904 inserts and is compatible with inserts supplied by Taegutec, offering flexibility in grade selection for different applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of an M16 thread, five cutting edges and compatibility with EPMT 0603 indexable inserts for stable and productive milling. Order the VT234TM directly via Metav Werkzeuge or consult our specialists for application-specific advice. VT234TM Screw-in Milling Head — for EPMT 0603 indexable inserts, M16, Ø35 mm (Teknik Makina) The VT234TM screw-in milling head is engineered for secure face and shoulder milling with EPMT 0603 indexable inserts, offering a compact assembly that suits precision-oriented production environments. Screw-in milling head for EPMT 0603 inserts M16 thread with 35 mm outside diameter Five cutting edges, 93° cutting angle Torx screw M2.5x5.5, T7 key required Compact overall length 60 mm, 224 g weight Secure mounting for consistent tool life and low runout A secure thread and clamping system reduce vibration and maintain concentricity during heavy cuts. The M16 thread combined with a tight clamp interface ensures repeatable seating and reduced tool runout, which in turn preserves insert life and surface finish. The supplied fastening method uses a Torx M2.5x5.5 screw tightened with a T7 key, providing a reliable mechanical joint that simplifies replacement cycles while keeping the cutter head stable under intermittent loads. Geometry tuned for efficient material removal with low cutting forces The cutter head’s five cutting edges and a 93° cutting angle deliver balanced chip formation and steady engagement across the tool body. The Ø35 mm diameter and a cutting height of 25.3 mm permit effective axial engagement for both roughing and semi-finish operations, reducing the number of passes required. Using EPMT 0603 indexable inserts provides a cost-efficient, modular approach to edge management: replace individual inserts rather than the entire head, maintaining productivity and lowering per-part cost. Compatibility and maintainability to reduce downtime Designed to accept EPMT 0603 indexable inserts and compatible with Hitachi-style insert geometry, the tool integrates into established tool families without the need for special adaptors. The compact 60 mm overall length and a mass of 0.224 kg make handling and tool-change operations straightforward. Thread engagement length of 34.7 mm gives sufficient clamping depth for secure mounting in standard toolholders. Should customers require further specification checks or machining recommendations, Metav’s technical team can provide tailored guidance and application data to support process integration. Contact Metav Werkzeuge for tailored procurement and technical advice on the Teknik Makina VT234TM screw-in milling head; our Emmerich location supplies components and expertise for reliable production continuity. Technical Data Article number: VT234TM Manufacturer: Teknik Makina Designation: Screw-in milling head for EPMT 0603 indexable inserts Data Diameter: 35 mm Thread: M16 Overall length: 60 mm Cutting edges: 5 Cutting height: 25.3 mm Thread engagement height: 34.7 mm Weight: 0.224 kg Cutting angle: 93° Special features Indexable insert type: EPMT 0603 Compatible with insert manufacturer: Hitachi Torx screw: M2.5x5.5 Torx key: T7 Bezeichnung_2_en: for EPMT 0603 Indexable Inserts FAQ Which insert type fits this screw-in milling head? The VT234TM screw-in milling head accepts EPMT 0603 indexable inserts, designed to match the insert pocket and locking geometry specified for that series. Is the VT234TM compatible with Hitachi inserts? Yes — the cutter head is compatible with Hitachi-style inserts of the EPMT 0603 form factor and can be used where that insert family is specified. What torque/fastening is required for insert changes? Insert retention uses a Torx M2.5x5.5 screw tightened with a T7 key; use the recommended tightening procedure to ensure secure clamp and repeatability. For which applications is this milling head intended? The VT234TM is suitable for face and shoulder milling where a compact screw-in solution with modular EPMT 0603 inserts is required, offering efficient material removal and straightforward insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, secure mounting system combined with internal coolant and broad insert compatibility to keep machining cycles efficient and reliable. Order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in cutter VT318-1TM – 35 mm, internal coolant for LOGU 0303 indexable inserts (Teknik Makina) The Screw-in cutter VT318-1TM is a compact milling head engineered for secure screw-in mounting and routine slotting or face milling operations using LOGU 0303 indexable inserts, suitable for workshop and light industrial CNC applications. 35 mm diameter for medium-duty milling Internal coolant for effective chip evacuation M16 screw-in connection, 25 mm thread height Compatible with Kyocera LOGU 0303 indexable inserts Secure mounting for consistent tolerances and rapid set-up The VT318-1TM’s M16 thread and 25 mm screw-in engagement provide a rigid connection to the arbor, which reduces runout and supports repeatable positioning during tool changes. The compact 65 mm overall length and 35 mm outer diameter mean a small collision radius and easier access to confined work envelopes. With a nominal weight of 0.23 kg, the body balances inertia and stability, helping to maintain stable cutting conditions and predictable surface finish when paired with the correct grade of insert. Coolant-through design reduces heat and extends insert life The cutter’s internal coolant channel feeds cutting fluid directly to the cutting zone, improving cooling and chip evacuation compared with external-only supply. This targeted coolant delivery lowers cutting temperature, which in turn helps to maintain insert edge integrity and reduces the risk of built-up edge. For shops aiming to increase uptime, the coolant-through function is a practical way to extend service intervals and preserve cutting performance under continuous operation. Standardised inserts and simple servicing to minimise downtime Compatibility with Kyocera LOGU 0303 indexable inserts gives access to a wide range of grades and geometries for turning a single head into a multi-application tool. The insert is secured with an M3x7 Torx screw (Torx drive T8), enabling rapid, repeatable insert changes with standard workshop tools. This standardisation reduces inventory complexity and allows quick adaptation between finishing and roughing tasks without changing the toolholder. Productivity-focused geometry and maintenance advantages Five cutting edges on the head increase effective material engagement per revolution while the 40 mm cutting height allows deeper cuts where process windows permit. The cutter body is designed for straightforward replacement of wear parts and quick reconditioning, supporting lean tooling strategies and cost-efficient production planning. For procurement and operations teams, the overall package supports shorter cycle times and steady throughput when integrated into an established tooling system. Secure supply of the Teknik Makina VT318-1TM is available from Metav Werkzeuge—contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for precise tooling recommendations and order coordination Technical data Article number: VT318-1TM Product: Screw-in cutter Label: 35 mm screw-in cutter LOGU 0303 L65 mm with internal coolant Brand: Teknik Makina Facts Diameter: 35 mm Overall length: 65 mm Thread: M16 Thread height: 25 mm Cutting edges: 5 Cutting height: 40 mm Weight: 0.23 kg Torx screw: M3x7 Torx key: T8 eClass: 21180806 Special features Internal coolant Compatible with Kyocera LOGU 0303 indexable inserts Screw-in mounting for reduced runout Compact design for restricted workplaces FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; Kyocera-manufactured inserts in the LOGU 0303 family are compatible with the VT318-1TM. Is the tool coolant-through? Yes, the VT318-1TM features internal coolant, which supplies cutting fluid directly to the cutting edge to aid chip evacuation and temperature control. What is the thread size for the screw-in connection? The head uses an M16 screw-in connection with a 25 mm thread engagement for secure mounting. How are inserts secured to the head? Inserts are fastened with an M3x7 Torx screw using a T8 Torx key for quick and reliable insert changes. What applications is this cutter suited to? The cutter is intended for medium-duty slotting and face milling operations on CNC and conventional machines when used with appropriate LOGU 0303 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high material removal rates, secure screw-in clamping and reliable coolant management for consistent machining cycles. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Screw-in milling cutter for RDMT 1003 indexable inserts — 35 mm, internal coolant (Teknik Makina) Screw-in milling cutter for general milling applications that accepts RDMT 1003 indexable inserts, designed for secure M16 clamping and internal coolant feed Compact 35 mm diameter Internal coolant for extended tool life Holds RDMT 1003 indexable inserts M16 screw-in thread for secure clamping Faster material removal with dependable coolant support This screw-in milling cutter is engineered to deliver high productivity in interrupted and continuous milling operations. The combination of a 35 mm diameter cutting head and 5 cutting edges enables efficient material removal while maintaining a stable cut. Integrated internal coolant supplies coolant directly to the cutting zone, improving chip evacuation and reducing thermal load on the insert. The result is longer tool life and fewer index changes, which translates into lower process interruptions and more predictable cycle times on the shop floor. Robust clamping and practical service design reduce downtime A secure connection is critical in high-feed machining. The tool features an M16 screw-in thread and a dedicated thread height of 24.5 mm, providing reliable axial support and repeatable seating for each change. Insert retention is via the supplied M3.5x8.5 Torx screw, tightened with a T15 Torx key, enabling quick insert replacement and minimised handling time. With an overall length of 60 mm and a cutter height of 35.5 mm, the assembly balances accessibility with rigidity, helping to reduce vibration and improve surface finish on finished components. Designed for straightforward integration and consistent results Compatibility with RDMT 1003 indexable inserts allows flexible selection of grades and geometries for specific workpiece materials and machining strategies. The tool’s measured weight and compact form factor support simple balancing and easier tool magazine handling in automated cells. Clear mechanical interfaces — screw-in shank, standard Torx fastening and internal coolant channels — make the component straightforward to specify and maintain. Supplied as a precision-made item from Teknik Makina, the cutter fits into established tooling systems and supports repeatable set-ups across batches. Contact Metav Werkzeuge for tailored application advice and secure availability from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: VT107-1TM Product type: Screw-in milling cutter Brand: Teknik Makina Core technical data Diameter: 35 mm Overall length: 60 mm Thread height: 24.5 mm Cutter height: 35.5 mm Number of cutting edges: 5 Weight: 0.211 kg Thread: M16 Materials & features Internal coolant: yes Compatible inserts: RDMT 1003 Torx key: T15 Torx screw: M3.5x8.5 FAQ Which indexable inserts fit this tool? The cutter accepts RDMT 1003 indexable inserts, allowing selection of grades and geometries suited to different materials and cutting conditions. Does the tool provide through-tool coolant? Yes — the internal coolant channel feeds coolant to the cutting zone, improving chip flow and thermal control for the Teknik Makina screw-in milling cutter (SKU VT107-1TM). What thread and clamping method are used? Clamping is by an M16 screw-in thread with a 24.5 mm thread height for stable seating and repeatable positioning. Which fastening parts are supplied or required? The insert is secured with an M3.5x8.5 Torx screw, tightened with a T15 Torx key, enabling quick insert changes and minimal downtime. What are the key dimensions to check for machine compatibility? Confirm the 35 mm diameter, 60 mm overall length, cutter height of 35.5 mm and the M16 thread to ensure compatibility with the spindle adapter or toolholder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, coolant-fed design combined with a secure M16 screw-in mounting and compatibility with RDMT 1003 indexable inserts for reliable, repeatable machining performance; order directly via Metav Werkzeuge or consult our specialists for application advice. VT106-1TM 35 mm screw-in milling cutter – M16 thread, internal coolant (Teknik Makina) The VT106-1TM 35 mm screw-in milling cutter is a coolant-fed milling head for RDMT 1003 indexable inserts, designed for stable slotting and shoulder milling in workshop and production environments. 35 mm diameter for stable cutting M16 screw-in thread for secure mounting Internal coolant for improved chip evacuation Compatible with RDMT 1003 indexable inserts Four cutting edges for balanced performance Stable cutting with balanced geometry The VT106-1TM screw-in milling head is engineered for consistent material removal: its 35 mm diameter and four cutting edges deliver a balanced cut that reduces vibration and promotes even wear across the inserts. That balance translates into steadier surface finishes and predictable tool life, lowering the frequency of regrinds or replacement. The crown-shaped mass distribution and precisely finished contact surfaces ensure concentric running when clamped into standard M16 screw-in adaptors, supporting repeatable results on both bench and machine-mount setups. Coolant-fed design that extends tool life Built-in internal coolant channels feed cutting fluid directly to the cutting zone, improving chip evacuation and heat control during heavy cuts. This targeted cooling reduces thermal loading on both the inserts and carrier, which slows abrasive and thermal wear and helps maintain cutting geometry for longer. For operations that cycle between finishing and roughing passes, the coolant-fed design provides a tangible benefit in maintaining surface quality and reducing downtime for insert changes. Secure mounting and straightforward maintenance The M16 screw-in connection, with its defined thread height, offers robust clamping and simple removal for maintenance. The cutter accepts standard RDMT 1003 grade inserts and is secured using the supplied Torx fastening system (Torx key T15, screw M3.5x8.5), enabling quick insert indexing and replacement with minimal setup time. The design keeps service tasks lean, so changeovers are fast and can be carried out without specialised fixtures, supporting higher machine availability and lower labour costs. Practical fit for workshop and production use With an overall length of 60 mm and a compact weight, the carrier is suitable for a wide range of milling applications where indexable-insert tooling is preferred. Its compatibility with RDMT 1003 inserts makes it a flexible choice for operations seeking an economical combination of insert life and cutting performance. Combined with a dependable supply chain and Metav’s quality filtering for the European market, this tool supports stable production runs and straightforward reordering when replacement units or spare screws are required. For tailored application recommendations or to secure supply of Teknik Makina screw-in milling cutters, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert advice and reliable delivery Technical data Article number: VT106-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Key figures Diameter: 35 mm Overall length: 60 mm Weight: 0.201 kg Thread height: 24.5 mm Cutting-edge height: 35.5 mm Number of cutting edges: 4 Features & accessories Thread: M16 Cooling: internal coolant Inserts: RDMT 1003 Torx key: T15 Torx screw: M3.5x8.5 FAQ What inserts does this cutter accept? The VT106-1TM screw-in milling cutter is designed for RDMT 1003 indexable inserts, allowing use of a wide range of grades for differing materials and cutting conditions. Does the tool provide internal coolant? Yes, the carrier is supplied with internal coolant channels to direct fluid to the cutting zone and improve chip evacuation and tool life. How is the cutter mounted and secured? Mounting uses an M16 screw-in thread; inserts are fixed with Torx screws (Torx key T15, screw M3.5x8.5) for quick and reliable replacement. Which machining tasks suit this cutter best? This screw-in milling head is well suited to slotting and shoulder milling operations where indexable inserts and coolant-fed performance are required in both workshop and small-series production. Is the VT106-1TM simple to service in a busy shop? Yes, the secure M16 mounting and standard Torx fastening allow rapid insert changes and straightforward service, helping to keep machine uptime high. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure screw-in mounting, Ø 35 mm cutting diameter and fast insert changes for reliable, high‑productivity milling; order through Metav Werkzeuge or ask the consultants for application advice. Screw-in milling cutter for APXT 1003 indexable inserts — Teknik Makina, Ø 35 mm, M16 thread A screw-in milling cutter designed for stable face and shoulder milling with APKT/APXT 1003 indexable inserts in general workshop and light production environments. Screw-in design with M16 thread Ø 35 mm cutter diameter 4 cutting edges for stable machining Compatible with APKT 1003 inserts Stable mounting for consistent machining results The screw-in design with an M16 thread provides a secure interface that reduces runout and vibration, which translates into improved surface finish and predictable tool life. With a Ø 35 mm diameter and a compact 60 mm overall length the tool offers a rigid cutting geometry that supports higher feed rates without sacrificing repetition accuracy. This robustness is especially beneficial where short setup times and low scrap rates are required, making the holder a practical choice for repetitive shoulder and face milling operations. Fast insert changes and reliable clamping cut downtime Designed for APKT 1003 (APXT 1003) indexable inserts, the tool accepts common triangular inserts from major suppliers such as Korloy, ensuring broad availability and choice. The cutting inserts are secured by a Torx screw M2.5x5.5 driven with a T8 key, enabling quick, repeatable replacement with minimal recalibration. Fewer and faster insert changes reduce non‑productive time and support continuous shopfloor throughput, while the standardised interface helps keep inventory and tooling planning straightforward. Compact dimensions that suit varied set-ups With a cutting height of 35.5 mm and a thread height of 24.5 mm, the cutter balances reach and stiffness for many common milling fixtures. The tool’s 90° cutting angle is optimised for square shoulders and precise face milling, while a mass of 0.225 kg keeps handling simple during tool changes and inventory handling. These measured dimensions make the component well suited for modular toolholders and compact milling heads where space is limited yet stability remains essential. Request a technical consultation from Metav Werkzeuge to confirm fitment and production suitability — Metav Werkzeuge can advise on inserts, clamping torque and optimal feeds for the Teknik Makina screw‑in milling cutter (VT146TM) Technical data Article number: VT146TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter for indexable inserts Compatible inserts: APKT 1003 / APXT 1003 Core technical data Diameter: 35 mm Thread: M16 Number of cutting edges: 4 Overall length: 60 mm Cutting height: 35.5 mm Thread height: 24.5 mm Cutting angle: 90° Weight: 0.225 kg Torx screw: M2.5x5.5 Torx key: T8 SKU: VT146TM ECLASS: 21180806 ETIM: EC011860 Special features Screw-in mounting for low runout Compatible with Korloy and equivalent inserts Compact, rigid design for face and shoulder milling Quick‑change Torx clamping system Suitable for APKT/APXT 1003 indexable inserts FAQ What inserts fit this screw-in milling cutter? The screw‑in milling cutter accepts APKT 1003 / APXT 1003 indexable inserts; common manufacturers such as Korloy supply compatible grades for varied materials. Is the cutter suitable for shoulder milling on steel? Yes, the VT146TM cutter’s Ø 35 mm diameter and 90° cutting angle deliver the rigidity and geometry required for precise shoulder milling in typical steel applications. How is the insert secured and what tool is needed? Inserts are secured with a Torx screw M2.5x5.5; a T8 Torx key is used for tightening to achieve repeatable clamping. Can the cutter be used in compact toolholders? The 60 mm overall length and M16 screw‑in interface make the cutter compatible with many compact toolholder systems while maintaining stiffness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the secure M16 screw-in connection, three cutting edges and APKT 1604 insert compatibility for efficient, repeatable milling; order directly via Metav Werkzeuge or consult the specialists for application advice. Teknik Makina Screw-in Milling Cutter VT166TM — 35 mm diameter, M16 thread for APKT 1604 inserts The screw-in milling cutter VT166TM is a compact, M16‑threaded tool designed for face and shoulder milling with APKT 1604 indexable inserts, providing a robust clamping solution for short‑setups. M16 screw‑in connection Compatible with APKT 1604 inserts Three cutting edges for stable cutting Torx M4x10 clamping screw, T15 key Secure clamping that reduces setup variability The M16 screw‑in connection with a thread engagement of 24.5 mm and a dedicated M4x10 Torx clamping screw (Torx key T15) gives mechanically secure tool retention and consistent repeatability. This rigid interface minimises micro‑movement during heavy cuts and shortens rework rates, so machine time becomes more predictable. The quick clamping arrangement also reduces changeover time, which supports higher overall equipment effectiveness and a leaner production flow. Stable cutting performance and predictable tool life With a 35 mm diameter and three cutting edges, the cutter distributes chip load evenly across inserts for controlled material removal. The 90° cutting angle and a cutting height of 35.5 mm deliver reliable face and shoulder milling performance, enabling efficient stock removal while maintaining surface finish. The robust geometry supports steady cutting conditions that translate into repeatable tool life and planning certainty for batch production or continuous operation. Compatibility and practical maintenance for uninterrupted production Designed for APKT 1604 indexable inserts (compatible with Korloy grades), the tool allows fast insert replacement and offers flexibility in carbide grades for different applications. The compact overall length (60 mm) and low mass (approx. 0.211 kg) limit spindle load and improve accessibility in confined set‑ups. Routine maintenance requires only a T15 key for the M4x10 screw, enabling safe, fast insert changes and minimal downtime for servicing the cutter. For tailored advice on integrating the Teknik Makina screw‑in milling cutter VT166TM into production, contact Metav Werkzeuge for application support and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT166TM Name: Screw-in milling cutter for APKT 1604 indexable inserts Manufacturer: Teknik Makina Weight: 0.211 kg Facts Diameter: 35 mm Overall length: 60 mm Cutting height: 35.5 mm Thread engagement height: 24.5 mm Thread: M16 Number of cutting edges: 3 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 ECLASS: 21180806 ETIM: EC011860 Special features Compatible with APKT 1604 indexable inserts Suitable for Korloy APKT 1604 insert grades Secure screw‑in connection for repeatable positioning Compact design for restricted workspaces FAQ Which inserts fit this cutter? The cutter accepts APKT 1604 indexable inserts; VT166TM is designed for standard APKT 1604 geometries and is compatible with Korloy insert grades. What is the thread specification and how is the tool secured? VT166TM uses an M16 screw‑in connection with a thread engagement of 24.5 mm and is secured by an M4x10 Torx clamping screw tightened with a T15 key. How many cutting edges are provided and what is the cutting angle? The tool is fitted with three cutting edges and a 90° cutting angle to provide stable face milling and predictable cutting performance. What are the main dimensions and mass of the cutter? Key figures for the cutter: diameter 35 mm, overall length 60 mm, cutting height 35.5 mm, weight approx. 0.211 kg. Which tool is required for insert changes? Insert and clamping screw changes are performed with a T15 Torx key for the M4x10 clamping screw on VT166TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact design that combines precision clamping, stable machining and easy insert replacement for reliable cycle times. Benefit from broad compatibility with industry-standard APMT 0903 indexable inserts and order directly via Metav Werkzeuge or request technical advice from the consultants at Metav. VT228TM screw-in milling cutter — Ø35 mm, M16 thread (Teknik Makina) The VT228TM screw-in milling cutter for APMT 0903 indexable inserts is a compact tool body engineered for stable face and shoulder milling in CNC and turning-milling operations For APMT 0903 indexable inserts Ø35 mm head with M16 screw-in thread Five cutting edges for balanced machining Torx M2.5x5.5 clamping screw, T7 key Stable clamping and consistent cutting quality The robust M16 screw-in connection and specified thread length of 40 mm deliver a secure interface that keeps the cutting geometry stable under load. With a Ø35 mm head and five cutting edges, the body is designed to distribute forces evenly so that vibration is minimised and surface finish consistency is improved. The result is predictable tool behaviour and fewer unexpected rejects, which supports lean production planning and process reliability. Quick insert changes and proven insert compatibility Clamping is performed with a Torx M2.5x5.5 screw (Torx key T7), enabling rapid and repeatable insert replacement. The cartridge is made for APMT 0903 indexable inserts, a widespread insert format; compatibility with Korloy inserts increases sourcing flexibility and helps to lower inventory pressure. The moderate 15° cutting angle promotes effective chip formation and a controlled cutting force, which can reduce cycletime variation in mixed-batch production. Shop-floor practicality and handling advantages With a total length of 65.3 mm and a cutting height of 25.3 mm, the body is compact yet accessible for routine maintenance; the weight (0.261 kg) supports balanced spindle loads in many standard toolholders. The design focuses on straightforward replacement and secure clamping, so set-up times are reduced and tool management becomes more predictable. Supply is supported by Metav’s distribution in Emmerich, offering consistent availability and a quality filter for the European market. For a tailored compatibility check, technical specification or rapid procurement from Metav Werkzeuge, contact Metav’s consultants for a precise recommendation and delivery options on the Teknik Makina VT228TM screw-in milling cutter Technical data Article number: VT228TM Manufacturer: Teknik Makina Suitable for indexable inserts: APMT 0903 Compatible insert maker: Korloy Data Diameter: 35 mm Total length: 65.3 mm Thread: M16 Thread length: 40 mm Cutting height: 25.3 mm Number of cutting edges: 5 Cutting angle: 15° Weight: 0.261 kg Torx screw: M2.5x5.5 Torx key: T7 Special features For APMT 0903 indexable inserts Compatibility with Korloy inserts Secure M16 screw-in mounting Five-edge geometry for balanced cutting Rapid insert clamping with Torx screw FAQ Which inserts fit this tool body? The VT228TM screw-in milling cutter accepts APMT 0903 indexable inserts; Korloy-compatible grades are suitable and commonly available. What fastening hardware is required for insert replacement? Insert clamping uses a Torx M2.5x5.5 screw secured with a T7 key for repeatable torque and quick changes. What are the key dimensions to check for machine integration? Relevant dimensions are Ø35 mm head, total length 65.3 mm, thread M16 with 40 mm engagement and cutting height 25.3 mm. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High stability from the secure M16 thread, compact 35 mm diameter and a five-edge cutting configuration deliver consistent material removal and low vibration. Benefit from a robust 60 mm overall length and reduced changeover time thanks to standard RDMT 1003 indexable inserts. Order the Teknik Makina VT107TM screw-in milling cutter directly via Metav Werkzeuge or consult the specialists if specification advice is required. VT107TM screw-in milling cutter (35 mm, M16) by Teknik Makina The VT107TM is a screw-in milling head engineered for compact milling operations with RDMT 1003 indexable inserts, offering secure mounting and high repeatability for CNC and machine-tool applications. Screw-in design for RDMT 1003 inserts 35 mm diameter for compact operations M16 mounting thread for secure fit Five cutting edges for productive material removal Secure mounting for consistent results The screw-in design with a M16 thread and a thread height of 24.5 mm provides a rigid connection between spindle and cutter, reducing runout and improving tool life. With a 35 mm diameter, the tool suits tight setups where a compact head is needed without compromising stiffness. The moderate weight of 0.211 kg supports rapid spindle acceleration while maintaining balance in high-speed machining. These characteristics translate into fewer tool-change interruptions and more predictable cycle times on production machines. High productivity through replaceable inserts Equipped to accept RDMT 1003 indexable inserts and configured with five cutting edges, the tool delivers steady material removal with each revolution. The design includes a M3.5 locking screw and a Torx screw (M3.5x8.5), assembled using a T15 Torx key, which ensures quick and repeatable insert changes. Using indexable inserts reduces overall tooling cost and downtime compared with solid tools, while allowing a choice of grades and chipbreakers to match the workpiece material and surface finish requirements. Integration into workshop workflows With an overall length of 60 mm overall length, the milling head is easy to incorporate into standard tool-holders and modular spindle setups. The compact profile supports operations where access is limited but reliable cutting performance is mandatory. The engineering of the head focuses on practicality: straightforward mounting, standard fasteners and compatibility with widely used insert geometry mean that maintenance routines are simple and spare parts are readily available, supporting uninterrupted production schedules. Select the Teknik Makina VT107TM for compact, secure and productive milling — contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VT107TM Manufacturer: Teknik Makina Product: Screw-in milling cutter for RDMT 1003 indexable inserts ECLASS: 21180806 ETIM: EC011860 Numbers / Core technical data Diameter: 35 mm Overall length: 60 mm Cutting height: 35.5 mm Thread height: 24.5 mm Thread: M16 Cutting edges: 5 Weight: 0.211 kg Special features / Design Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which indexable inserts fit this milling head? The VT107TM is designed for RDMT 1003 indexable inserts; use inserts with the matching geometry and grade for the required application. What is the mounting thread and how deep is it engaged? Mounting uses an M16 screw-in thread with a thread height of 24.5 mm, providing a secure engagement for stable cutting. How many cutting edges are available and what is the cutting height? The tool features five cutting edges and a cutting height of 35.5 mm to allow productive engagement per revolution. Which fasteners are required for insert clamping? Insert clamping uses an M3.5 locking screw and an M3.5x8.5 Torx screw; assembly and service require a T15 Torx key. What are the overall dimensions and mass of the cutter? Overall length is 60 mm, diameter 35 mm and the unit weighs approximately 0.211 kg, suitable for compact spindle arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure screw-in mounting, compatibility with RDMT 1003 indexable inserts and a compact 35 mm diameter for stable, repeatable milling results; order the VT106TM directly via Metav Werkzeuge or consult their technical advisors for process integration. VT106TM screw-in cutter – 35 mm diameter, M16 thread, for RDMT 1003 indexable inserts (Teknik Makina) A robust VT106TM screw-in cutter engineered for screw-in mounting in production toolholders and optimised for RDMT 1003 indexable inserts, suitable for medium-duty milling and finishing operations 35 mm diameter for medium-duty milling M16 screw-in thread for secure mounting Compatible with RDMT 1003 indexable inserts Four cutting edges for consistent material removal Stable mounting for repeatable production results The screw-in design with an M16 thread and a compact 35 mm diameter delivers a firm mechanical connection that reduces run-out and vibration during machining. This stability translates into consistent surface quality and predictable tool life, which is crucial for batch production and CNC operations. The cutter’s overall length of 60 mm and a thread engagement height of 24.5 mm ensure secure seating in compatible toolholders, while the modest mass of 0.201 kg helps to keep dynamic loads low. For engineers and workshop managers, the result is fewer set-up checks and more reliable cycle times. Rapid insert changes with secure fastening and defined geometry Designed for RDMT 1003 indexable inserts, the tool carries four cutting edges, allowing multiple indexings before replacement. The cutting height of 35.5 mm provides the necessary reach for common face and slot milling tasks, and the insert clamping uses an M3.5 locking screw together with a Torx screw M3.5x8.5 tightened with a T15 key, giving a reproducible clamping torque and quick serviceability. This arrangement reduces downtime for insert changes and simplifies maintenance routines, improving overall equipment effectiveness in production environments. Practical applications and workshop integration Suited to general milling and finishing tasks in a CNC or toolroom setting, the screw-in cutter is a compact alternative when space in the spindle or holder is limited. Its compatibility with a widely used insert format makes it straightforward to integrate into existing tooling systems, while the defined mechanical interfaces support a predictable tool-change procedure. The combination of indexable insert compatibility, secure Torx fastening and a proven screw-in mount supports efficient inventory management and reduces the number of dedicated solid tools required on the shop floor. Contact Metav Werkzeuge to discuss how the Teknik Cutting Tools VT106TM with M16 screw-in mounting and RDMT 1003 compatibility can be integrated into current tool setups — Metav Werkzeuge’s specialists in Emmerich are available by email or phone Technical data SKU: VT106TM Article name: screw-in cutter Brand: Teknik Makina For inserts: RDMT 1003 indexable inserts eClass: 21180806 ETIM: EC011860 Core technical data Diameter: 35 mm Overall length: 60 mm Cutting height: 35.5 mm Thread engagement height: 24.5 mm Thread: M16 Number of cutting edges: 4 Weight: 0.201 kg Special features Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Screw-in mounting for secure, repeatable seating Compatible with RDMT 1003 indexable inserts FAQ What insert type does this cutter accept? The cutter is designed for RDMT 1003 indexable inserts and provides a secure pocket and clamping arrangement for reliable performance. How is the insert secured in the cutter? Inserts are clamped using an M3.5 locking screw together with an M3.5x8.5 Torx screw; tightening is performed with a T15 key for reproducible clamping. What are the key mounting dimensions to check in a toolholder? Check the M16 screw-in thread and the 24.5 mm thread engagement height to ensure compatible seating in the toolholder. Is the cutter suitable for automated tool changes? The screw-in design with defined mechanical interfaces supports repeatable positioning and is compatible with automated or manual tool-change workflows in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure M16 screw-in mounting, compatibility with SDMT 09T3 indexable inserts and efficient three-edge engagement for consistent milling results. Order the component directly via Metav Werkzeuge or request advice from our consultants for application-specific selection. VT241TM screw-in cutter for SDMT 09T3 indexable inserts – Ø35 mm, M16 thread (Teknik Makina) A compact VT241TM screw-in cutter designed for straightforward attachment and machining with SDMT 09T3 indexable inserts, suitable for precision-facing and light to medium milling operations. Compact Ø35 mm diameter Secure M16 screw-in mounting Three cutting edges for stable engagement Compatible with ZCC SDMT 09T3 inserts Reliable mounting for repeatable machining accuracy The screw-in design with an M16 mounting provides a positive, concentric connection that reduces run-out and contributes to reproducible results in production runs. With a threaded engagement height of 29 mm the holder achieves solid axial support, which helps maintain a consistent cutting geometry during interrupted cuts. This mechanical stability translates into predictable tool behaviour and reduced rework rates. Stable cutting performance with optimised engagement Equipped with three cutting edges, the tool body offers balanced cutting forces and a smooth chip load, which lowers vibration and helps to protect both the insert and machine spindle. The Ø35 mm diameter and a cutting height of 40 mm support reliable engagement depth without compromising rigidity. These characteristics improve surface finish and extend the effective life of indexable inserts when set up within recommended parameters. Fast insert changes and service-friendly design Insert retention uses a Torx M3.5x8.5 screw secured with a T15 key, enabling quick, repeatable insert changes and minimising downtime on the shop floor. Compatibility with ZCC-manufactured SDMT 09T3 indexable inserts ensures access to a broad range of grades for varied materials and cutting conditions. The configuration simplifies logistics and reduces the need for multiple specialised holders. Compact form and easy integration into tooling systems With a total length of 69 mm and a net weight of 0.231 kg, the component is compact enough for tight setups while retaining sufficient mass for stable cutting. Its dimensions favour versatile placement in modular tool systems and make it suitable for retrofitting existing toolholders where a screw-in solution is required. The result is an efficient, space-saving option that supports consistent production flow. For precision attachment with Teknik Makina components, contact Metav Werkzeuge in Emmerich for specification support or to place an order: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data SKU: VT241TM Manufacturer: Teknik Makina Article: Screw-in cutter for SDMT 09T3 indexable inserts Facts Diameter: 35 mm Thread: M16 Total length: 69 mm Thread engagement height: 29 mm Cutting height: 40 mm Cutting edges: 3 Weight: 0.231 kg Torx screw: M3.5x8.5 Torx key: T15 Compatible inserts: SDMT 09T3 Compatible insert manufacturer: ZCC eCl@ss: 21180806 ETIM: EC011860 Compatibility & Features Indexable insert system: SDMT 09T3 Insert manufacturer compatibility: ZCC Quick-change Torx screw fixation Screw-in mounting for minimal run-out FAQ What type of inserts fit this cutter? The VT241TM is designed for SDMT 09T3 indexable inserts and is compatible with inserts from ZCC. Which mounting thread is required for installation? Installation requires an M16 screw-in seat; the VT241TM features a 29 mm thread engagement for a secure fit. How are the inserts secured in place? Inserts are clamped with a Torx M3.5x8.5 screw; a T15 key is used for tightening and replacement. Is the cutter suitable for heavy roughing operations? The VT241TM is optimised for stable light to medium milling engagements; for heavy roughing, consider holders and insert grades specified for higher radial and axial loads. What are the key dimensions to check for machine integration? Relevant dimensions include the Ø35 mm body diameter, 69 mm total length and the M16 screw-in mounting interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of precise clamping, reliable internal coolant and wide compatibility with SDMT 09T3 indexable inserts to maintain steady chip control and minimise changeover time. Order directly via Metav Werkzeuge or contact our consultants for integration advice and supply. Screw-in Cutter VT241-1TM (35 mm) for SDMT 09T3 Indexable Inserts by Teknik Makina A screw-in cutter VT241-1TM designed for indexable-insert milling applications, providing internal coolant delivery and a secure M16 threaded connection for production environments. 35 mm diameter for stable cutting Internal coolant for effective chip evacuation M16 screw-in connection Compatible with SDMT 09T3 inserts (ZCC) High stock removal with measured stability The cutter offers a 35 mm diameter and three cutting edges, delivering a balanced load per tooth that supports continuous material removal with reduced vibration. The 69 mm overall length and 40 mm cutting-edge height are matched to typical insert seat depths, which helps to maintain concentricity and improve surface finish. As a threaded-in tool, this design minimises radial runout and provides predictable tool life, which supports process planning in batch and serial production. Coolant-fed chip control for better surface quality Equipped with internal coolant, the tool channels cutting fluid directly to the cutting zone to improve chip evacuation and temperature control. That direct coolant feed reduces built-up edge and helps preserve insert geometry, resulting in more consistent finishes and fewer secondary operations. In practical terms, the coolant feature contributes to longer insert life and fewer unscheduled interruptions, translating into measurable gains in machining efficiency. Secure clamping and fast insert servicing The M16 screw-in connection ensures a robust mechanical joint for high-stability milling, while the kit’s fastening system uses a Torx T15 interface and M3.5x8.5 Torx screw for repeatable insert retention. The lightweight body (approx. 0.231 kg) reduces spindle load during rapid traverses and simplifies handling during tool changes. The clear serviceability of the assembly lowers maintenance time and reduces the risk of assembly errors on the shop floor. Seamless compatibility with common inserts and tooling systems This cutter is engineered to accept SDMT 09T3 indexable inserts and is specified as compatible with ZCC insert supplies, enabling straightforward retrofit into existing tool inventories. The combination of a standard screw-in interface and widely used insert geometry permits quick integration into established tooling systems, supporting supply-chain flexibility and minimising downtime when replacing worn heads. The VT241-1TM from Teknik Makina therefore suits workshops seeking dependable, easy-to-service insert milling options. For detailed integration advice on the Teknik Makina VT241-1TM screw-in cutter, or to arrange supply directly from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert assistance. Technical data SKU: VT241-1TM Product type: Screw-in cutter Brand: Teknik Makina Dimensions & core data Diameter: 35 mm Overall length: 69 mm Cutting-edge height: 40 mm Thread height: 29 mm Thread: M16 Weight: 0.231 kg Number of cutting edges: 3 Torx screw: M3.5x8.5 Torx key: T15 Materials & special features Inner coolant: yes Compatible with SDMT 09T3 indexable inserts Compatible insert manufacturer: ZCC Manufacturer: Teknik Makina SKU reference: VT241-1TM FAQ Is this cutter compatible with SDMT 09T3 inserts? Yes. The VT241-1TM screw-in cutter is designed for SDMT 09T3 indexable inserts and is specified as compatible with ZCC inserts. Does the tool provide internal coolant? Internal coolant is integrated into the VT241-1TM, supplying cutting fluid directly to the cutting zone to assist chip evacuation and thermal control. What fastening hardware is required for insert changes? Insert retention for this screw-in cutter uses a Torx T15 key and an M3.5x8.5 Torx screw, allowing repeatable securing of the SDMT 09T3 inserts. What are the key dimensions to check for fixture compatibility? Critical dimensions include the 35 mm cutter diameter, 69 mm overall length and M16 threaded connection; these determine spindle and holder compatibility for the VT241-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Achieve consistent, coolant-assisted milling with a compact screw-in design: the combination of internal coolant, a 35 mm diameter and secure M16 screw-in mounting ensures stable cutting performance and reduced tool wear. Order the screw-in milling cutter directly via Metav Werkzeuge or ask our consultants for detailed application advice. Screw-in milling cutter VT228-1TM – 35 mm diameter, internal coolant (Teknik Makina) The screw-in milling cutter VT228-1TM is a compact, coolant-fed holder engineered for use with APMT 0903 indexable inserts, designed to deliver repeatable, production-ready milling results in machining centres. 35 mm diameter with internal coolant M16 thread for secure mounting Compatible with APMT 0903 indexable inserts Torx T8 screw system for assembly Coolant-assisted design for longer tool life and consistent chips The holder’s internal coolant channel directs cutting fluid close to the insert nose, improving chip evacuation and reducing thermal load on the cutting edge. This arrangement helps maintain cutting-edge geometry for longer periods, which translates into fewer tool changes and more stable cycle times. Using indexable inserts allows quick restoration of cutting performance: worn inserts can be replaced in minutes, limiting downtime and keeping throughput high. For production environments that demand repeatability, the coolant-fed configuration supports continuous machining with less manual intervention. Secure screw-in connection for precise, repeatable mounting Engineered around an M16 thread and a compact overall length, the screw-in configuration provides a firm, vibration-resistant interface with the toolholder. Key dimensions such as 35 mm diameter, overall length 65.3 mm, and a thread engagement height of 25.3 mm contribute to a low-runout mounting that benefits surface finish and tool life. The tool’s fastening system uses a Torx T8 key and an M2,5x5,5 Torx screw for reliable clamping of the cutting head, enabling safe torque application and quick serviceability without specialised equipment. Compatibility and practical handling for workshop efficiency Designed specifically for APMT 0903 indexable inserts and compatible with inserts from Korloy, this screw-in cutter suits shops that standardise on insertised tooling for flexibility and cost control. With five cutting edges and a cutting height of 40 mm, the holder supports a range of milling tasks where insert geometry and grade determine the specific application. The compact mass (approx. 0.261 kg) and standardised interface make it straightforward to integrate into existing tool inventories, while the internal coolant provision supports higher stability in continuous operations. For coolant-fed milling from Teknik Makina, contact Metav Werkzeuge for availability and application matching — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical details and delivery options Technical Data SKU: VT228-1TM Product type: Screw-in milling cutter For inserts: APMT 0903 indexable inserts Compatible inserts manufacturer: Korloy Manufacturer: Teknik Makina Internal coolant: yes Core specifications Diameter: 35 mm Overall length: 65.3 mm Thread: M16 Thread engagement height: 25.3 mm Cutting height: 40 mm Number of cutting edges: 5 Weight: 0.261 kg Special features Internal coolant channel Torx key: T8 Torx screw: M2,5x5,5 Compact screw-in design for secure mounting Intended for APMT 0903 insert family FAQ Which inserts fit this holder? The VT228-1TM is designed for APMT 0903 indexable inserts and is compatible with Korloy inserts of that specification. Does the cutter provide internal coolant? Yes, the screw-in milling cutter features internal coolant for directed fluid flow to the cutting zone. What is the thread and mounting type? Mounting is by M16 screw-in thread with a thread engagement height of 25.3 mm. How many cutting edges does the assembly use? The cutting head is configured with five cutting edges, offering a balance between material removal and insert life. Which tool is needed to secure the insert head? Assembly and maintenance use a Torx T8 key and an M2,5x5,5 Torx screw for reliable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact milling head that combines high metal-removal rates, precise seating and internal coolant for longer insert life; ideal for batch production and repairs. Benefit from a robust M16 interface, five cutting edges and compatibility with EPMT 0603 indexable inserts — order directly via Metav Werkzeuge or consult our specialists for integration guidance. Screw-in cutter VT234-1TM — 35 mm diameter, internal coolant (Teknik Makina) Screw-in cutter VT234-1TM designed as a modular milling head for indexable-insert operations, optimised for medium-duty face and peripheral milling in workshop and production environments 35 mm cutting diameter Internal coolant supply Compatible with EPMT 0603 inserts M16 screw-in interface Faster cycle times through concentrated cutting power The VT234-1TM delivers consistent material removal thanks to its 35 mm diameter and five precisely formed cutting edges. This geometry reduces the number of passes required on common operations, improving throughput on short and medium-length runs. The combination of a compact head and concentrated cutting geometry helps maintain stable chip evacuation and predictable tool life, which in turn reduces unplanned stoppages and keeps production schedules reliable. Secure mounting and simple serviceability for less downtime A robust M16 screw-in thread and defined thread height ensure a repeatable, vibration-resistant connection to the tooling system. The tool features a standard T8 Torx key interface and a secured Torx screw (M2.5×5.5) that allows quick head servicing and insert changes with common workshop tools. This design minimises setup time and ensures the cutter returns to concentricity after reassembly, supporting stable cutting forces and extended insert life. Internal coolant for improved insert performance and surface finish Integrated internal coolant targets the cutting zone directly, lowering temperatures and flushing chips away from the insert pocket. By reducing thermal loads, insert wear is slowed and surface finish is elevated, particularly on continuous cuts. The internal feed is especially beneficial when machining steel and alloyed materials, where heat control translates to better tolerances and fewer secondary operations. Broad compatibility to support flexible tooling strategies The milling head accepts EPMT 0603 indexable inserts and is specified as compatible with inserts from Hitachi, enabling stock standardisation across existing toolsets. With five cutting edges and a clearly defined cutting-edge height, the head suits a variety of milling tasks in general workshop environments and smaller production cells where flexibility and part turnaround are important. Select the Teknik Makina VT234-1TM for efficient, reliable indexable milling and contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply Technical data SKU: VT234-1TM Manufacturer: Teknik Makina E-class: 21180806 Core dimensions Diameter: 35 mm Overall length: 60 mm Thread: M16 Thread height: 34.7 mm Cutting edges: 5 Cutting-edge height: 25.3 mm Weight: 0.224 kg Special features Internal coolant: yes Compatible inserts: EPMT 0603 indexable inserts Compatible insert manufacturer: Hitachi Torx key: T8 Torx screw: M2.5x5.5 FAQ What insert type does this cutter accept? The cutter accepts EPMT 0603 indexable inserts; compatibility with Hitachi inserts is specified for this VT234-1TM milling head. Is the tool suitable for coolant-through operation? Yes, the head is equipped with internal coolant to supply the cutting zone directly, improving insert life and surface finish. How is the cutter secured to the holder? The tool uses an M16 screw-in interface with a defined thread height to ensure repeatable, vibration-resistant mounting. How many cutting edges are available and what is their height? The cutter is fitted with five cutting edges; the cutting-edge height is 25.3 mm, which helps determine engagement and feed parameters. Which key and screw are required for insert changes? Insert retention uses a Torx screw M2.5x5.5 and a T8 Torx key for safe and straightforward insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, high‑compatibility tool that balances precision and uptime: the 35 mm screw‑in cutter delivers a secure M16 screw connection and rapid insert changes for steady production—order the (VT318TM screw‑in cutter) directly via (Metav Werkzeuge) or ask our consultants if needed. Screw‑in cutter VT318TM – for LOGU 0303 Indexable Inserts, M16 thread (Teknik Makina) A Screw‑in cutter VT318TM engineered for milling operations with LOGU 0303 indexable inserts, offering a 35 mm diameter and a compact 65 mm overall length 35 mm cutting diameter Compatible with LOGU 0303 inserts M16 screw‑in thread, L65 mm overall length Five cutting edges, 40 mm cutting height High compatibility that reduces tool change downtime The cutter is built around compatibility with the LOGU 0303 system and Kyocera insert standards, which streamlines procurement and storekeeping in production environments. With a 35 mm cutting diameter and an indexable insert concept, the tool allows quick insert replacement rather than full‑body tool changes, resulting in shorter stoppages and more predictable scheduling. This approach supports continuous machining processes and reduces the variety of spare parts required on the shop floor. Secure mounting and balanced cutting for consistent results A robust M16 screw‑in connection combined with a compact 65 mm overall length gives a rigid interface for the spindle, improving stability during heavy cuts. The head features five cutting edges and a 40 mm cutting height, which spread cutting forces and support even wear across the inserts; the measured mass of 0.23 kg contributes to low inertia for rapid tool changes. Insert fastening uses a Torx T8 key and M3x7 Torx screw, ensuring repeatable clamping torque and safe seating of the indexable inserts for reliable machining runs. Designed for efficient workflows in modern workshops The design emphasises throughput and cost efficiency: standardised inserts and a screw‑in mounting reduce downtime and simplify maintenance intervals. The geometry of the head and the insert system support good chip control and surface finish, while the compact form factor helps with clearance in multi‑axis setups. As a practical option from Teknik Makina, the VT318TM aligns with lean toolroom strategies by lowering inventory complexity and enabling fast, predictable insert swaps to keep production moving. For procurement or detailed application advice on the VT318TM from Teknik Makina, contact Metav Werkzeuge for ordering and technical consultation Technical Data SKU: VT318TM Label: 35mm Einschraubfräser LOGU 0303 L65mm Product type: Einschraubfräser / Screw‑in cutter Manufacturer: Teknik Makina Category path: Zerspanen > Einschraubfräser Facts Diameter: 35 mm Overall length: 65 mm Thread height: 25 mm Weight: 0.23 kg Thread: M16 Cutting edges: 5 Cutting height: 40 mm Special features For LOGU 0303 indexable inserts Compatible with Kyocera inserts Torx key: T8 Torx screw: M3x7 ECLASS: 21180806 FAQ What insert system does this cutter use? The VT318TM cutter is configured for the LOGU 0303 indexable insert system and is compatible with Kyocera‑standard inserts. Which thread is required for mounting this tool? The tool uses an M16 screw‑in thread and a 25 mm thread height for secure clamping in the spindle. How many cutting edges are available and what is the cutting height? This cutter head features five cutting edges with a cutting height of 40 mm, designed for balanced wear and consistent machining. What tools are needed to change the inserts? Insert fastening requires a Torx T8 key and an M3x7 Torx screw for secure, repeatable clamping of the indexable inserts. Is the VT318TM suitable for tight‑space setups? The compact 65 mm overall length and reduced mass make the VT318TM suitable for multi‑axis and constrained clearance applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid toolholder that combines secure M16 mounting with compatibility for RDMT 12T3 indexable inserts to keep machining stable and repeatable; order via Metav Werkzeuge or request tailored advice from our specialists for seamless integration into production. Screw-in milling cutter VT126TM by Teknik Makina — Ø35 mm, M16 thread, for RDMT 12T3 indexable inserts The screw-in milling cutter VT126TM is a precision screw-in milling head designed for use with RDMT 12T3 indexable inserts in medium‑duty milling applications. Screw-in design with M16 thread Compatible with RDMT 12T3 inserts Three cutting edges for stability Torx T15 clamp and M3.5 locking screw Stable mounting for repeatable machining A robust connection is the basis for consistent results: the M16 thread and 24.5 mm thread engagement provide firm seating in the spindle or arbor, reducing micro‑movement and runout during cutting. With an overall length of 60 mm and a body diameter of Ø35 mm, the holder balances rigidity and compactness to limit deflection under load. The modest mass of 0.196 kg lowers centrifugal and spindle loads, which contributes to prolonged tool life and predictable dimensional accuracy. Such mechanical stability translates directly into fewer rework cycles and steadier surface finishes on components. Optimised insert clamping and controlled chip removal The cutter accepts RDMT 12T3 indexable inserts, clamped securely by the supplied Torx screw assembly (M3.5x8.5) and tightened with a T15 key; a separate M3.5 locking screw adds secondary retention. The three cutting edges design delivers balanced cutting forces and smoother chip flow, while a cutting height of 35.5 mm provides sufficient engagement for shoulder and face milling tasks. For those less familiar: indexable inserts are replaceable cutting plates that can be rotated or exchanged when worn, offering rapid tool turnaround and consistent edge geometry without withdrawing the entire holder. Together, the clamping system and insert standard reduce downtime and simplify maintenance routines. Designed to integrate into workshop and production workflows The unit’s straightforward architecture supports fast setup and predictable repeatability in batch production or jobbing environments. Compatibility with the common RDMT 12T3 insert family ensures broad applicability across steels and non‑ferrous materials when paired with the appropriate insert grade. The Torx fastener system allows repeatable torque application for consistent clamping force, which supports process stability and operator confidence. As a compact screw‑in solution from Teknik Makina, this component is particularly suited where changeover speed, toolholding reliability and straightforward spare‑parts handling are priorities. For secure mounting in repetitive milling operations, choose the Teknik Makina screw‑in milling cutter VT126TM and contact Metav Werkzeuge in Emmerich for technical advice or prompt delivery from local stock via eMail info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: VT126TM Manufacturer: Teknik Makina Diameter: 35 mm Thread: M16 Overall length: 60 mm Thread engagement height: 24.5 mm Cutting height: 35.5 mm Number of cutting edges: 3 Weight: 0.196 kg Features Compatible with RDMT 12T3 indexable inserts Torx screw M3.5x8.5 for insert clamping Locking screw M3.5 Torx key size T15 Compact screw‑in holder design FAQ What inserts fit this screw‑in milling cutter? The VT126TM is specified for RDMT 12T3 indexable inserts; matching the correct insert grade to the workpiece material ensures optimal performance. How is the insert secured in the cutter head? Insert clamping is achieved via a Torx screw (M3.5x8.5) tightened with a T15 key, supplemented by an M3.5 locking screw for additional retention. Is the thread suitable for standard arbors? The holder uses an M16 screw‑in connection; compatibility with a machine arbor should be confirmed against the arbor’s thread and mounting specifications. What advantages do three cutting edges offer? A three‑edge configuration balances cutting forces, improves stability and helps maintain a consistent surface finish while supporting efficient chip evacuation. Can the VT126TM reduce spindle load compared with larger holders? Yes—the compact form and moderate mass (0.196 kg) lower centrifugal effects and can reduce spindle stress compared with bulkier toolholders, benefiting dynamic balance. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of robust mounting, internal coolant, and high material removal rate for predictable milling cycles. The secure screw-in interface and compatibility with BLMP 0904 indexable inserts ensure repeatable results and reduced tool-change times. Order the VT267-1TM directly via Metav Werkzeuge or ask our consultants if needed. VT267-1TM 35 mm screw-in cutter — internal coolant, for BLMP 0904 inserts (Teknik Makina) VT267-1TM is a screw-in cutter designed for high-performance milling with BLMP 0904 indexable inserts, offering internal coolant and a compact L65 profile. *35 mm cutting diameter *Internal coolant for chip control *Compatible with BLMP 0904 (Taegutec) *Four cutting edges for productive milling Faster material removal with stable cutting geometry The tool’s 35 mm cutting diameter paired with four cutting edges delivers a high material removal rate while maintaining stable cutting forces. Multiple effective edges distribute wear, which extends insert life and reduces replacement frequency. For operations where cycle time and tool longevity matter, the combination of diameter and flute count provides a measurable productivity gain and more consistent surface finish compared with single-edged solutions. Secure screw-in interface for repeatable setups A robust screw-in connection with M16 thread and a thread height of 25 mm ensures axial and radial rigidity at the holder interface. The clamping uses a Torx T10 key and retention screw M3.5x8.5, enabling secure and repeatable mounting of the cutting head. This precision interface lowers vibration and runout, improving dimensional accuracy and reducing the need for rework in series production or demanding workshop environments. Coolant-through design improves tool life and surface quality The through-tool internal coolant channel directs cutting fluid close to the cutting edge, enhancing cooling and chip evacuation where heat and chips concentrate. This reduces thermal load on the insert and helps avoid built-up edge formation, which in turn supports longer insert life and steadier performance over long passes. For wet machining strategies that depend on controlled chip flow and consistent temperatures, internal coolant is a clear technical advantage. Workshop compatibility and practical dimensions With an overall length of 65 mm and a tool weight of 0.235 kg, the VT267-1TM suits compact toolholder assemblies and minimizes overhang-related deflection. It is specified for BLMP 0904 indexable inserts and is compatible with inserts from Taegutec, simplifying parts procurement and stock management. The design supports efficient changeover routines and reduces the range of spare parts required for mixed-machine environments. For reliable high-performance milling with a secure screw-in interface, contact Metav Werkzeuge to specify VT267-1TM for production or workshop use — Metav’s technical consultants can advise on toolholder pairing and insert selection Technical data SKU: VT267-1TM Diameter: 35 mm Overall length: 65 mm Core specifications Cutting edges: 4 Cutting height: 40 mm Thread height: 25 mm Thread: M16 Weight: 0.235 kg Features & compatibility Internal coolant: yes Compatible inserts: BLMP 0904 (Taegutec) Torx key: T10 Retention screw: M3.5x8.5 Manufacturer: Teknik Makina FAQ Which inserts fit this screw-in cutter? This cutter accepts BLMP 0904 indexable inserts and is compatible with inserts from Taegutec, allowing straightforward replacement and stocking of common insert geometries. Is the cutter suitable for wet machining? Yes — the through-tool internal coolant channel supplies fluid directly to the cutting zone to aid cooling and chip evacuation during wet machining. What fastening hardware is required for mounting? Mounting requires the retention screw M3.5x8.5 and a Torx T10 key; the tool engages with an M16 screw-in interface with a 25 mm thread height for stable clamping. How does the cutter reduce tooling costs in production? The combination of four cutting edges and internal coolant helps extend insert life and lowers changeover frequency, which reduces overall tooling consumption across production runs. What are the main dimensional constraints to check before ordering? Confirm a compatible M16 screw-in holder and sufficient clearance for a 65 mm overall length and 35 mm cutting diameter to ensure correct fit-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, indexable solution that combines precise insert compatibility, a robust 32 mm shank and a Ø 35 mm cutting diameter for predictable machining results; order the S272TM directly via Metav Werkzeuge or ask the consultants if specification advice is required. S272TM Shank milling cutter for APKT 1604 indexable inserts — Ø 35 mm, 3-flute (Teknik Makina) S272TM is a shank milling cutter designed for indexable inserts and general metalworking, ideal where repeatable geometry and fast insert changes are essential. For APKT 1604 indexable inserts Ø 35 mm cutting diameter Three cutting edges for stable cutting Solid 32 mm shank for high rigidity High rigidity and consistent chip removal for stable production The S272TM is built around a Ø 35 mm cutting head and a 32 mm shank, offering a stiff connection between toolholder and cutting zone; this reduces deflection and improves dimensional consistency across batches. With a 90° cutting angle and three cutting edges, the cutter delivers predictable chip formation and surface finish while keeping cutting forces balanced. The robust shank diameter supports higher radial forces, which is particularly useful when slotting or shoulder milling is required. These design choices contribute to lower scrap rates and more consistent cycle times on the shop floor. Quick insert changes and straightforward clamping to cut downtime The indexable design accepts APKT 1604 inserts and is compatible with Korloy plate types, enabling operators to replace worn edges quickly instead of regrinding. Insert clamping uses an M4x10 Torx screw with a T15 key, a common configuration that simplifies maintenance routines and reduces tool-change time. The cutter’s 55 mm cutting length and 150 mm overall length balance reach and rigidity, helping to limit overhang without sacrificing accessibility. Fewer interruptions for tool servicing mean higher effective spindle utilisation and a smoother production flow. Practical dimensions and handling for workshop integration Weighing 0.915 kg, the tool is balanced for standard toolholders while its shank profile supports secure gripping in common collet or chuck systems. The head accepts three cutting edges, which spreads wear and prolongs the effective life of each insert, so replacement intervals are extended compared with single-edge alternatives. The S272TM’s straightforward geometry and indexable setup make it suitable for batch production as well as flexible jobbing environments where rapid turnaround and reproducible outcomes are priorities. Technical documentation and files are available for integration into tool lists and CAM setups. Contact Metav Werkzeuge today for specification checks and to reserve the S272TM for upcoming production runs — Metav Werkzeuge can advise on toolholder compatibility and supply logistics via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S272TM Manufacturer: Teknik Makina Product designation: Schaftfräser for APKT 1604 Indexable Inserts Brand: Teknik Makina SKU: S272TM Facts Diameter: 35 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.915 kg Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Special features For APKT 1604 indexable inserts Compatible with Korloy insert types Shank milling cutter design Three-flute geometry for balanced cutting Solid shank for increased rigidity FAQ Which insert type does this cutter accept? The S272TM is specified for APKT 1604 indexable inserts and is designed to secure those plates reliably for machining operations. Is the tool compatible with Korloy inserts? Yes, the cutter is compatible with Korloy-manufactured APKT 1604 inserts as indicated in the product specification. What are the main dimensions and mass of the cutter? Key dimensions are Ø 35 mm diameter, 32 mm shank diameter, 55 mm cutting length and 150 mm overall length; mass is 0.915 kg. How are the inserts fastened? Inserts are fastened with an M4x10 Torx screw that requires a T15 key for secure clamping and safe indexing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a robust Ø35 mm cutting diameter with a shank Ø32 mm and secure Torx clamping, the S282TM delivers stable, repeatable milling and efficient insert changes; order the S282TM directly via Metav Werkzeuge or consult our specialists for application support. S282TM — Indexable milling cutter for APKT 1604 Indexable Inserts, Ø35 mm, shank Ø32 mm (Teknik Makina) The S282TM is an indexable milling cutter designed for reliable material removal with APKT 1604 inserts in production and workshop environments. Insert cutter for APKT 1604 inserts Ø35 mm cutting diameter, 3 cutting edges Shank Ø32 mm, overall length 200 mm Torx M4x10 clamping, key T15 Stable clamping for vibration-free machining The cutter is engineered for a secure hold: the Torx M4x10 clamping screw and matching T15 key create consistent torque and minimise loosening under load. A solid shank Ø32 mm and a balanced body reduce runout and chatter, which leads to improved surface finish and longer tool life. This stability translates into fewer interruptions on the shop floor and a more predictable production rhythm, supporting efficient cycle times in batch and single-part machining. Productive cutting geometry that speeds up operations With a Ø35 mm cutting diameter and three cutting edges, the design focuses on steady chip removal and even tool engagement. The 90° cutting angle gives a robust cutting face for face and shoulder milling operations, while the 55 mm cutting length accommodates deeper passes when required. The insert system (suitable for APKT 1604 inserts, commonly supplied by Korloy) enables rapid insert indexing and replacement, reducing downtime and simplifying inventory management for cutting edges. Built for practical workshop use and easy serviceability A 200 mm overall length combined with a mass of 1.245 kg provides the rigidity needed for repetitive milling tasks without excessive overhang. The indexable concept means a lower total cost of ownership: only the small inserts are consumed rather than the whole cutter body, which supports sustainable consumption and straightforward maintenance. Compatibility with standard insert sizes and a simple Torx clamping routine make the tool well suited to both workshop benches and production lines requiring reliable, repeatable performance. For tailored advice on integrating the S282TM insert cutter from Teknik Cutting Tools into existing tooling setups, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com for application-oriented guidance and supply options Technical Data Article number: S282TM Manufacturer: Teknik Makina Designation: Schaftfräser (for APKT 1604 Indexable Inserts) SKU: S282TM Facts Diameter: 35 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 200 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 1.245 kg Torx screw: M4x10 Special features Compatible with APKT 1604 indexable inserts Recommended insert manufacturer: Korloy Torx key size: T15 3 cutting edges for stable engagement FAQ Which inserts fit this cutter? The cutter accepts APKT 1604 indexable inserts; the tool body is specified for that insert size and is commonly paired with Korloy inserts. How is the insert secured in the cutter? Inserts are clamped using a Torx M4x10 screw; tightening is performed with a T15 key to the specified torque for reliable retention. What is the cutter diameter and shank size? The tool features a Ø35 mm cutting diameter with a shank Ø32 mm, providing a balance between rigidity and accessibility. Is the tool suitable for production environments? Yes—the combination of a robust shank, secure Torx clamping and indexable inserts ensures repeatable performance and straightforward insert changes suited to production use. How heavy is the cutter and what is its overall length? The tool weighs 1.245 kg and has a 200 mm overall length, dimensions that support stable milling with moderate overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com