Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact design that combines stable shank support and indexable insert flexibility for efficient milling cycles; order the tool directly via Metav Werkzeuge or consult the specialists for application advice. Shank milling cutter R206TM — indexable milling cutter with 35 mm diameter Shank milling cutter R206TM designed for medium‑duty milling with RDMT 1003 indexable inserts, suitable for industrial machining and workshop toolrooms. Shank milling cutter »R206TM« by Teknik Makina Compatible with RDMT 1003 indexable inserts 35 mm cutting diameter, 3 cutting edges 32 mm shank for secure toolholding Stable cutting performance for productive milling The tool offers a 35 mm cutting diameter and 3 cutting edges, delivering steady material engagement and predictable chip formation. The combination of the 32 mm shank and a total length of 150 mm provides rigidity at the holder, reducing vibration and improving surface finish in repetitive passes. Using an indexable system with RDMT 1003 inserts allows individual edge changes rather than replacing the complete tool, which supports continuous production and reduces tool changeover time. The overall mass of 0.923 kg contributes to a balanced tool assembly that is straightforward to clamp in common toolholders. Practical maintenance and quick insert handling Insert clamping is governed by a locking screw M3.5 and a Torx screw M3.5x8.5, tightened with a T15 key, which standardises maintenance procedures across the workshop. This clear specification simplifies procurement of spare parts and replacement hardware. The indexable system removes the need for re‑grinding; inserts can be indexed or replaced as they reach wear limits, helping to contain tooling costs and keep machines running. For technical clarifications about fitment or to confirm suitability for a specific holder, Metav Werkzeuge provides direct consultation and additional documentation. Robust design that supports operational reliability Constructed for everyday industrial use, the cutter’s geometry and shank dimensions are selected to balance stiffness and accessibility in the cut. A 45 mm cutting length offers a practical axial reach while keeping the unsupported overhang low, which is beneficial in pocketing and peripheral milling tasks. The modular nature of the indexable system also enables inventory efficiency: a small range of inserts covers multiple cutter sizes and operations, lowering stock complexity. Teknik Makina’s tooling platform is aimed at workshops and production lines that value predictable tool life and straightforward serviceability. For enquiries about Teknik Makina R206TM or to secure compatible inserts and spare screws, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: R206TM Manufacturer: Teknik Makina Designation: Shank milling cutter (for RDMT 1003 indexable inserts) ECLASS: 21180806 ETIM: EC011860 Dimensions & weight Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length (shank): 45 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.923 kg Mounting & special features Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 UID / SKU: R206TM FAQ Which insert type fits this cutter? The cutter is specified for RDMT 1003 indexable inserts; the R206TM is designed around that insert geometry. What are the key dimensions for toolholder selection? Key dimensions are a 32 mm shank diameter and 150 mm overall length, which should be matched to the machine’s toolholder and available projection. How many cutting edges does the cutter have? The tool features 3 cutting edges, offering a compromise between material removal rate and finish quality. Which fasteners are used for insert clamping? Insert clamping uses a locking screw M3.5 and a Torx screw M3.5x8.5; a T15 key is specified for tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Efficient milling with high stability is achieved through the combination of a 35 mm cutting diameter and three cutting edges, supported by a robust 32 mm shank and a 45 mm cutting length; the result is reliable chip evacuation and steady tool life. Order the (shank cutter R216TM) directly via (Metav Werkzeuge) or ask our consultants if needed. Shank cutter R216TM – for RDMT 1003 indexable inserts, 35 mm diameter by Teknik Makina The Shank cutter R216TM is a precision-engineered milling tool designed for use with RDMT 1003 indexable inserts, offering a balanced combination of rigidity and accessibility for medium-duty face and slot milling in production environments. 35 mm cutting diameter for stable cuts Three cutting edges for smooth chip removal 32 mm shank ensures secure clamping Compatible with RDMT 1003 indexable inserts Stable cuts and predictable machining results The cutter’s 35 mm diameter and 32 mm shank deliver a high level of axial and radial stability, which reduces chatter and supports consistent surface finish. Because the design focuses on rigidity, the tool offers improved tolerance control in repetitive machining tasks. The combination of three cutting edges with a 45 mm cutting length helps to distribute loads evenly across the insert seats, which contributes to extended insert life and predictable replacement intervals. These features make the tool well suited to workflows where repeatability and minimal rework are priorities. Fast insert changes and secure clamping reduce downtime Tool changeover is simplified by the standardised clamping hardware: a locking screw M3.5, Torx screw M3.5x8.5 and T15 Torx key interface enable secure, repeatable insert fixation. The result is reduced setup time and lower risk of incorrect seating. The robust fastening system supports reliable torque application during maintenance, meaning insert replacement is straightforward and can be completed with common workshop tools. This contributes directly to higher machine uptime and more efficient shift planning. Performance characteristics that support production throughput With a 45 mm cutting length and an overall length of 200 mm, the tool provides an effective reach for a range of face and shoulder milling tasks while keeping deflection minimal. The cutter’s geometry has been optimised to maintain steady chip flow from the cutting zone to the periphery, which assists in heat control and prolongs insert performance. At a weight of 1.227 kg, the assembly balances mass and manoeuvrability for stable spindle dynamics without imposing excessive load on toolholders. Integration into workshop fleets and process chains Designed for compatibility with standard indexable inserts (RDMT 1003), the cutter integrates easily into existing tool inventories and tool management systems. The clear specification of clamping screws and Torx key size simplifies spare parts stocking and reduces logistical complexity. The product is identified under SKU R216TM, making procurement and traceability straightforward in ERP systems and tool lists. Technical classification references are provided for documentation and parts management. Contact Metav Werkzeuge today to specify the Teknik Makina R216TM for production workflows and arrange expert advice from our Emmerich team — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: R216TM Manufacturer: Teknik Makina SKU: R216TM ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 35 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 200 mm Cutting edges: 3 Weight: 1.227 kg Special features For RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Manufacturer: Teknik Cutting Tools SKU: R216TM ECLASS: 21180806 ETIM: EC011860 FAQ How many cutting edges does the cutter have and what benefit do they provide? The cutter is configured with three cutting edges; this arrangement promotes smooth chip evacuation and balanced cutting forces, extending insert life and supporting a consistent surface finish for the R216TM from Teknik Makina. Which insert type is compatible with this tool? This shank-mounted milling cutter is designed for RDMT 1003 indexable inserts, ensuring standardised fitment and easy integration into existing tool sets. What fastening hardware is required for insert changes? Insert fixation uses a locking screw M3.5 and Torx screw M3.5x8.5, operated with a T15 Torx key, which allows secure and repeatable clamping of the RDMT 1003 inserts. What are the key dimensions to verify for toolholder compatibility? Important dimensions include a 35 mm cutting diameter, 32 mm shank, 45 mm cutting length and a 200 mm overall length; these figures are applicable for holder selection and reach planning. Is the tool specified for heavy-duty milling applications? The design emphasises rigidity and stable cutting behaviour for medium-duty production milling; consult process engineers for extreme heavy-duty or highly abrasive conditions to confirm suitability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the stable clamping and simple insert replacement this milling body provides: the combination of a robust 25 mm shank and a Ø35 mm cutting diameter ensures steady performance and reduced vibration, while the Torx fixation speeds maintenance and keeps tooling downtime to a minimum. Order or request advice via Metav Werkzeuge for reliable supply and technical guidance. Shank Milling Cutter R196TM – indexable insert milling body Ø35 mm, 3 cutting edges (Teknik Makina) The Shank Milling Cutter R196TM is a shank-mounted milling body designed for machining operations using RDMT 1003 indexable inserts, providing a compact solution for insert-based milling tasks across general workshop and production environments Ø35 mm cutting diameter Three cutting edges 25 mm shank diameter For RDMT 1003 indexable inserts Consistent clamping for steady machining results A substantial 25 mm shank and a compact overall length deliver high torsional rigidity, which translates into more consistent tool engagement and reduced chatter during interrupted cuts. The relatively low mass (0.508 kg) helps to limit centrifugal stress at higher spindle speeds while still offering the inertia needed for steady milling. These physical attributes provide a reliable basis for repeatable results and predictable tool life when the cutter is mounted and balanced correctly. Balanced cutter geometry to aid chip control and surface finish With a Ø35 mm diameter and three cutting edges, the tool body is optimised to distribute cutting forces evenly across the insert seats. The 45 mm cutting length allows for modest axial engagement while maintaining rigidity, and the three-edge configuration supports efficient chip formation and evacuation. For operators who are new to indexable milling, this geometry reduces the likelihood of uneven loading and helps to achieve a more uniform surface finish with fewer passes. Secure, service-friendly fixation to reduce downtime Insert retention uses a locking screw specification M3.5 and a Torx screw M3.5x8.5, secured with a T15 key, enabling quick, repeatable insert changes and precise clamp torque. This standardised fixation method simplifies maintenance procedures and minimises the time spent at the machine for insert replacement or re-facing. If uncertainty remains about the correct tightening sequence or torque values, Metav Werkzeuge can provide application-oriented advice to streamline setup and protect the inserts. Compatibility that simplifies tooling inventories Designed specifically for RDMT 1003 indexable inserts, the milling body reduces the number of different holders required on the shop floor by consolidating a common insert type into a shank-mounted format. The compact 120 mm overall length and standardised fixation make it straightforward to integrate into existing tool holders and setups. For small to medium batch work, this modular approach supports faster changeovers and more economical stock management without sacrificing robustness. Contact Metav Werkzeuge for a tailored tooling consultation on Teknik Makina milling bodies like the R196TM and arrange reliable delivery from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: R196TM Manufacturer: Teknik Makina Designation: Schaftfräser for RDMT 1003 Indexable Inserts Facts Diameter: 35 mm Cutting edges: 3 Overall length: 120 mm Shank diameter: 25 mm Cutting length: 45 mm Weight: 0.508 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Special features For RDMT 1003 indexable inserts Indexable insert milling body Torx T15 fixation system Shank-mounted design FAQ What insert type fits this milling body? The milling body is designed for RDMT 1003 indexable inserts; this compatibility is stated on the TekniK Makina R196TM cutter and ensures standardised insert sourcing. How is the insert secured in the cutter? Retention is achieved with a locking screw M3.5 and a Torx screw M3.5x8.5, tightened using a T15 key to provide repeatable and secure clamping for each insert change. Which shank diameter and overall length does the tool have? The tool features a 25 mm shank and an overall length of 120 mm, dimensions that balance rigidity and accessibility for typical workshop installations. Can the cutter be used across different machines? The shank-mounted format and standardised fixation make the cutter suitable for a wide range of milling spindles and holders; confirm machine compatibility with the tooling interface before fitting the tool. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust shank design and reliable insert compatibility to keep machining runs stable and tool changeovers fast; order directly via Metav Werkzeuge or request tailored advice from our consultants. Shank milling cutter for RDMT 12T3 indexable inserts — Ø35 mm, 3 flutes (Teknik Makina) A shank milling cutter designed for medium‑duty face and peripheral milling that accepts RDMT 12T3 indexable inserts and is suitable for workshop and production use. Ø35 mm cutting diameter 3 cutting edges for steady chip load Compatible with RDMT 12T3 inserts 32 mm shank for secure clamping Consistent material removal with proven cutter geometry The Ø35 mm cutting diameter combined with 3 flutes delivers a balanced cutting action that reduces vibration and evens out the chip load across the insert pockets. By accepting RDMT 12T3 indexable inserts the tool separates the wear element from the tool body: worn inserts can be replaced quickly, which lowers consumable costs and shortens downtime. The modularity of indexable tooling also simplifies inventory management, as a single cutter body can cover a range of operations with the correct insert grades. Rigidity and secure clamping for repeatable accuracy A 32 mm shank provides the necessary stiffness for high‑precision passes and secure mounting in robust tool holders. The insert is retained via an M3,5 locking screw and fixed with an M3,5x8,5 Torx screw, tightened using a T15 key, ensuring a reliable clamp that resists loosening under intermittent loads. The substantial tool mass (approx. 1.855 kg) contributes to stable cutting behaviour in moderate removal operations and supports repeatable positioning when the tool is exchanged. Reach and machining flexibility that reduce set‑ups With a 45 mm cutting length and 300 mm overall length, the design provides reach for operations that require extended overhang without resorting to improvised tooling. The available cutting length permits effective step‑downs while keeping the cutting edge engagement predictable, so programmed feed rates and depths remain consistent. This combination helps to reduce changeovers and allows longer, uninterrupted production runs when paired with the right insert grade. Practical advantage in workshop workflows As a component of a modular tooling strategy, this cutter supports rapid insert changes and straightforward tool life management. The standardised insert interface means compatibility with a wide range of grades for different materials and cutting conditions, allowing a clear cost‑benefit analysis: fewer complete tools in stock, lower per‑cutting‑edge cost and faster maintenance cycles. Combined with Metav’s emphasis on reliable supply and technical expertise, the cutter complements a stable production setup. For reliable machining results with Teknik Cutting Tools’ shank milling cutters, contact Metav Werkzeuge in Emmerich for specification advice and dependable supply from stock. Technical data Article number: R258TM Manufacturer: Teknik Makina SKU: R258TM Facts Diameter: 35 mm Cutting edges: 3 Shank diameter: 32 mm Cutting length: 45 mm Overall length: 300 mm Weight: 1.855 kg Special features For RDMT 12T3 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 FAQ Which inserts fit this cutter? The cutter is designed for RDMT 12T3 indexable inserts; use the appropriate insert grade for the workpiece material to achieve optimal wear and surface finish. What clamping hardware is required for insert replacement? Insert retention uses an M3,5 locking screw and an M3,5x8,5 Torx screw; a T15 key is specified for tightening. Is the shank suitable for standard tool holders? The 32 mm shank is compatible with holders that accept that diameter and provides the rigidity required for stable machining. How long is the cutting portion and what reach does the tool offer? The tool provides a 45 mm cutting length and a 300 mm overall length, offering extended reach for operations where additional overhang is needed. Can this cutter reduce tool inventory costs? Yes — by using RDMT 12T3 indexable inserts the body remains in service while worn inserts are replaced, lowering the per‑cutting‑edge cost and simplifying stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precision, compatibility and straightforward maintenance: the combination of a Ø 35 mm cutting head, Shank Ø 25 mm and 3 cutting edges ensures stable milling with indexable inserts and predictable tool life. Order the shaft milling cutter directly via Metav Werkzeuge or ask the consultants for tailored cutting data. S262TM Shaft milling cutter for APKT 1604 indexable inserts by Teknik Makina — Ø 35 mm, Shank Ø 25 mm A robust milling solution: the S262TM is a shaft-mounted cutter designed for milling with APKT 1604 indexable inserts in typical precision and production environments Indexable cutter for APKT 1604 inserts Diameter 35 mm with 3 flutes Shank Ø 25 mm for secure clamping Torx M4x10 screw; T15 key required Reliable compatibility that simplifies tooling decisions The holder is engineered specifically for use with APKT 1604 indexable inserts and is compatible with inserts from Korloy, removing uncertainty when standardising tooling across a fleet of machines. With a Shank Ø 25 mm and a body Ø 35 mm, the tool is balanced for rotational stability; this reduces vibration and helps to protect insert edges. The 3 cutting edges arrangement offers a compromise between chip evacuation and cutting continuity, which supports consistent surface finishes in interrupted and continuous milling operations. As an indexable system, insert replacement is cost-effective and reduces downtime compared with solid-tool replacement. Performance characteristics that support efficient production A 90° cutting angle promotes predictable axial engagement and straightforward depth control in slotting and face milling tasks, while the Cutting length 45 mm allows deeper passes without changing the tool for many common setups. The cutter’s geometry is intended to deliver stable chip formation and even load distribution across inserts, contributing to repeatable cycle times and lower scrap rates. The M4x10 fixation with a T15 key provides secure clamping of the insert seat; this precise clamping translates into reproducible cutting behaviour across tool changes and supports high process reliability in serial production. Practical handling and maintenance for workshop workflows Insert changes are performed with the supplied Torx specification (M4x10 screw, T15 key), so replacements are rapid and require only basic tools. The indexable design means consumable wear is confined to inserts; the body remains in service, simplifying inventory and maintenance planning. The moderate overall length and the Shank Ø 25 mm make the tool straightforward to install in standard tool holders and collet chucks, reducing set-up time. Clear, repeatable clamping ensures the insert position remains constant after each change, which supports consistent part quality without extensive rework. Where this cutter adds value and how it fits production needs This shaft-mounted cutter suits CNC workshops, job shops and production lines that prefer indexable systems for economy and flexibility. The combination of Ø 35 mm, a robust shank and a 3-edge configuration means the tool adapts well to slotting, shoulder milling and light face-milling operations where insert-based tooling is preferred. Technical purchasers benefit from predictable stocking — only the inserts are consumed — and engineers benefit from repeatable results when standardising cutting parameters across machines. The product is listed under eClass 21180806 and ETIM EC011860, aiding integration into purchasing systems. For availability, technical parametrisation or to request compatible insert recommendations from Metav Werkzeuge, contact our specialists who can advise on cutting conditions and supply the Teknik Makina S262TM with fitting inserts and accessories Technical Data Article number: S262TM Manufacturer: Teknik Makina Description: Shaft milling cutter for APKT 1604 indexable inserts ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 35 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 3 Weight: 0.498 kg Cutting angle: 90° Special features Compatible with APKT 1604 indexable inserts Compatible insert brand: Korloy Torx screw: M4x10 Torx key size: T15 SKU: S262TM FAQ Which inserts fit this milling cutter? The S262TM is designed for APKT 1604 indexable inserts; Korloy APKT 1604 inserts are suitable and commonly used with this cutter. What clamping hardware is required for insert replacement? Insert clamping uses an M4x10 Torx screw; a T15 Torx key is specified for secure tightening. What are the main dimensions to check for holder compatibility? Key dimensions are Diameter 35 mm, Shank Ø 25 mm, Cutting length 45 mm and overall length 120 mm; these determine fit in tool holders. Is the cutter suitable for serial production? Yes — the indexable design of the Teknik Makina S262TM supports economical consumable replacement and consistent performance for serial production runs. How many cutting edges does the tool have and what is the effect? The tool has 3 cutting edges, balancing chip removal and surface quality to provide stable cutting in a range of milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a high-stability cutting solution that combines a 35 mm cutting diameter, 25 mm shank and compatibility with APXT 1003 indexable inserts for reliable material removal and reduced tool changes — order directly via Metav Werkzeuge or consult the technical team for application advice. S171TM Insert Milling Cutter by Teknik Makina — 35 mm Diameter, 25 mm Shank The S171TM is an insert milling cutter designed for APXT 1003 indexable inserts, delivering stable face and shoulder milling performance in CNC and manual milling setups. 35 mm diameter for wider material engagement 25 mm hardened shank for stable clamping Compatible with APXT 1003 indexable inserts Four cutting edges, 90° cutting angle Consistent material removal with high engagement The S171TM is engineered to provide predictable cutting behaviour through its 35 mm diameter and four cutting edges, which allow for efficient chip evacuation and consistent material removal rates. The 90° cutting angle facilitates square shoulders and reduced side forces, translating into improved surface finish and fewer passes for many milling tasks. Performance benefits are rooted in geometry rather than speculative claims, supporting higher productivity in repeat operations. Rapid insert changes and dependable clamping Insert handling focuses on uptime: the tool accepts APXT 1003 indexable inserts (Korloy-compatible) and is secured with a Torx M2.5x5.5 clamping screw tightened with a T8 key, enabling quick, repeatable insert replacement and minimal downtime. The indexable system reduces tooling inventory while allowing damaged edges to be rotated rather than replacing the whole tool, yielding clear operational economy for batch-oriented production. Rigidity and balance for repeatable accuracy A 25 mm shank diameter and a total length of 120 mm create a stiff, well-balanced assembly suited to stable clamping in standard tool holders. The cutter’s 40 mm cutting length offers a compromise between reach and rigidity for many face- and shoulder-milling tasks, while the modest weight of 0.532 kg helps to reduce spindle load and vibration. Together these characteristics support consistent dimensional results and extended insert life under properly set conditions. Practical application scope and compatibility Designed primarily for insert-based milling operations, this cutter is most effective where quick indexability and solid clamping are required. Compatibility with APXT 1003 inserts from Korloy ensures access to a wide range of grades for varied materials and cutting conditions. Where process reliability and simple maintenance are priorities, the tool offers a pragmatic solution for workshops and production lines seeking a balance between productivity and predictable service intervals. Contact Metav Werkzeuge for availability, grade recommendations and delivery options for the Teknik Cutting Tools S171TM insert milling cutter — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S171TM Brand: Teknik Makina Product: S171TM insert milling cutter for APXT 1003 indexable inserts Core measurements Diameter: 35 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 4 Weight: 0.532 kg Cutting angle: 90° Special features Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Clamping screw: Torx M2.5x5.5 Torx key: T8 SKU: S171TM FAQ What inserts fit this cutter? The cutter accepts APXT 1003 indexable inserts; it is specified for APXT 1003 compatibility and matches Korloy insert geometries. How is the insert secured? Inserts are retained with a Torx M2.5x5.5 clamping screw tightened using a T8 key, enabling secure and repeatable clamping. What machining tasks suit this tool? This insert milling cutter is intended for face and shoulder milling where indexable inserts and quick edge changes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, long-reach shank design and precise compatibility with APKT 1604 indexable inserts to maintain steady production and predictable tool life; order the cutting solution directly via Metav Werkzeuge or consult our specialists for sizing and application advice. Shaft milling cutter S454TM – 35 mm diameter shank cutter for APKT 1604 indexable inserts by Teknik Makina The Shaft milling cutter S454TM is a long-reach shank cutter engineered for reliable face and shoulder milling with indexable inserts, suited to production and workshop environments where repeatable performance and straightforward insert changes matter. *Compatible with APKT 1604 Korloy inserts *35 mm cutting diameter for robust milling *32 mm shank, 350 mm overall length Reliable insert system for predictable machining results This shank cutter uses APKT 1604 indexable inserts, a widely available insert format that simplifies tool management and minimises downtime during regrinds or replacements. The insert interface ensures consistent seat location and repeatable cutting geometry; when paired with Korloy inserts the tool achieves uniform chip control and stable cutting forces. The main benefit is reduced clamping and setup time, which supports steady-cycle production and easier inventory handling of spare inserts. Stiff shank and extended reach reduce deflection in deep operations With a 32 mm shank and an overall length of 350 mm, the tool is designed for jobs requiring extended reach without sacrificing rigidity. The larger shank diameter improves resistance to bending and vibration, which in turn protects surface finish and tool life when performing shoulder milling or light slotting. For workshops facing occasional long-reach passes, this tool offers a balance between accessibility and stability, translating to fewer rejects and less rework. Efficient cutting geometry for shorter cycle times Equipped with three cutting edges and a 90° cutting angle, the cutter provides efficient material removal and good radial support for shoulder faces. The arrangement of edges supports even load distribution across inserts, allowing consistent feed rates and predictable machining times. Where throughput is critical, this geometry delivers a higher material removal rate compared with single-edge solutions, while still offering straightforward indexable-insert replacement for sustained productivity. Service-friendly assembly and clear maintenance cues Fast, tool-free insert changes are supported by a simple Torx fixing system (screw M4x10, key T15), enabling quick exchange of worn inserts on the shopfloor. The use of a standard Torx screw reduces the risk of incorrect fastening tools and helps maintain correct clamping torque for secure insert seating. As a result, maintenance intervals are easier to plan and the toolholder remains accessible to trained technicians, helping to keep uptime high. For a reliable Teknik Makina shank solution that fits existing APKT 1604 insert stocks, contact Metav Werkzeuge for tailored procurement and technical assistance by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: S454TM Manufacturer: Teknik Makina Suitable for inserts: APKT 1604 Compatible insert brand: Korloy Torx screw: M4x10 Torx key: T15 Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length (shank cutting): 65 mm Overall length: 350 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 2.332 kg Special features Indexable inserts system Long-reach shank design Standard Torx fastening for inserts Suitable for face and shoulder milling FAQ Which inserts fit this cutter? The cutter accepts APKT 1604 indexable inserts; compatibility has been specified for Korloy inserts and standard seat geometry. Is the shank suitable for heavy milling? The 32 mm shank and 350 mm overall length of the S454TM balance reach and rigidity; for heavy roughing, ensure clamping and machine rigidity are adequate. What fasteners are used for insert fixation? Insert fastening uses a Torx screw M4x10 and Torx key T15, enabling secure and repeatable clamping of the inserts. Can the cutter be used for finishing passes? Yes — with the correct choice of APKT 1604 finishing inserts, the toolhead is suitable for finishing shoulders and face milling where indexable-insert solutions are preferred. What are the main benefits of this Teknik Makina shank cutter? The Teknik Makina S454TM provides straightforward insert replacement, extended reach with reduced deflection thanks to its 32 mm shank, and efficient cutting via three cutting edges for improved cycle times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the tool's internal coolant and 35 mm diameter for consistent chip evacuation and stable metal removal; combine these features with compatibility for Korloy XNKT 0805 inserts to secure efficient machining cycles — order directly via Metav Werkzeuge or consult the team for application advice. S843-3TM — Indexable insert milling cutter, 35 mm diameter, coolant-through (Teknik Makina) A S843-3TM indexable insert milling cutter engineered for coolant-through machining and compatible with XNKT 0805 indexable inserts for reliable roughing and semi-finishing operations. 35 mm diameter for stable cutting Coolant-through design for chip evacuation Holds Korloy XNKT 0805 indexable inserts 32 mm shank diameter for rigid clamping Higher metal removal rates through stable geometry The tool’s 35 mm diameter and four cutting edges deliver a geometry optimised for high material removal while keeping cutting forces predictable. The combination of a robust body and 4 cutting edges enables longer tool engagement with each indexable insert, which translates into fewer passes and shorter cycle times. For production-oriented workshops this means a measurable improvement in throughput without compromising surface quality. The presence of internal coolant ensures coolant reaches the cutting zone directly, supporting chip control and temperature management — a decisive factor when machining under higher feed or depth of cut. Secure clamping and fast insert changes reduce downtime A 32 mm shank provides the rigidity required for heavy cuts and minimises vibration when clamped in a toolholder, improving tool life and repeatability. Insert changes are straightforward: the cutter uses a Torx screw (Torx T15) with an M4x10 fastening, permitting quick replacement of Korloy XNKT 0805 inserts with standard workshop tools. The simplified replacement routine reduces unproductive time at the machine and helps maintain consistent process parameters across shifts. Clear mechanical interfaces and well-defined fastenings also make maintenance predictable and safe. Versatile performance for roughing and semi-finishing with predictable economics With a cutting length of 40 mm and an overall length of 130 mm the cutter balances accessibility and stiffness for a range of milling tasks. The coolant-through capability contributes to longer insert life and consistent surface quality, lowering total machining cost per component. The tool’s design suits integration into standard production cells where process reliability is essential: repeatable insert indexing, efficient chip evacuation and robust clamping combine to reduce scrap rates and increase first-pass yield. For buyers seeking dependable tooling backed by logistics and expert advice, the Metav supply chain offers a transparent and dependable delivery route. Choose the Teknik Makina S843-3TM for coolant-through milling where stable clamping and Korloy XNKT 0805 compatibility matter — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S843-3TM Label: 35mm Schaftfräser XNKT 0805 L130mm mit Innenkühlung Product type: Indexable insert milling cutter Manufacturer: Teknik Makina Facts Diameter: 35 mm Total length: 130 mm Shank diameter: 32 mm Cutting length: 40 mm Number of cutting edges: 4 Weight: 0.914 kg Special features Internal coolant (coolant-through) Compatible inserts: XNKT 0805 Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this milling cutter? The S843-3TM accepts XNKT 0805 indexable inserts; compatibility is specified for Korloy XNKT 0805 inserts. What advantage does the internal coolant provide? Internal coolant on the S843-3TM delivers coolant directly to the cutting zone, improving chip evacuation and thermal control for longer insert life. Is the shank suitable for rigid clamping in standard holders? Yes — the 32 mm shank diameter is intended for rigid clamping, reducing vibration and improving repeatability during heavy cuts. How many cutting edges are engaged and what does this mean for productivity? The cutter has four cutting edges; this increases engagement per revolution and allows higher material removal rates with controlled cutting forces. What fastening hardware is required for insert changes? Insert clamping uses a Torx T15 key and an M4x10 screw, enabling quick and repeatable insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High radial stiffness from the 35 mm body together with a 32 mm shank and four cutting edges delivers stable chip removal and predictable tool life for heavy roughing and shoulder milling. The tool accepts XNKT 0805 indexable inserts (Korloy) and is secured with M4x10 Torx screws tightened using a T15 key. Order the cutter directly via Metav Werkzeuge or ask the consultants for compatibility advice. 35 mm End Mill for XNKT 0805 Indexable Inserts — Teknik Makina The 35 mm end mill for XNKT 0805 indexable inserts is a purpose-built milling cutter for robust material removal and reliable clamping in CNC machining and production environments. 35 mm diameter for robust material removal 32 mm shank for high clamping stability Accepts XNKT 0805 inserts (Korloy compatible) Torx T15 screws with M4x10 fixing Improved productivity through stable cutting performance The solid design and 32 mm shank reduce vibration and deflection during heavy passes, translating into more consistent surface finishes and extended insert life. With four cutting edges, the cutter balances material removal rate and cost-efficiency: multiple edges mean fewer index changes and longer intervals between maintenance stops. The combination of a substantial 35 mm body and secure screw clamping contributes to high stability, which is particularly valuable when machining interrupted cuts or shoulder profiles. Secure insert retention and straightforward handling The clamping system uses M4x10 Torx screws tightened with a T15 key to ensure repeatable retention torque and simple insert replacement. This mechanical arrangement reduces downtime during tool changes and minimises the risk of insert movement under load. The cutter accepts XNKT 0805 indexable inserts, a standard format that allows workshops to source suitable grades from established manufacturers such as Korloy, enabling fast adaptation to different materials and cutting conditions. Compatibility that supports flexible production planning Designed for indexable inserts, the tool allows quick switching between carbide grades and geometries to match workpiece materials and process objectives. The compatibility with Korloy inserts broadens the choice of grades for cast iron, steel or alloy applications where an indexable insert approach is preferred. The tool’s numerical and mechanical properties support integration into standard toolholders and holder setups common in milling centres and production cells. Practical workshop benefits and maintenance The cutter’s measured dimensions—35 mm diameter, 130 mm overall length and 40 mm cutting length—offer a pragmatic balance between reach and rigidity for many milling tasks. The weight of approximately 0.914 kg gives a sense of the tool’s robust construction without being unwieldy for routine handling. Marked and standardised fixing elements simplify inventory management and ensure that spare screws and keys are straightforward to keep in stock, contributing to predictable uptime in the workshop. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina indexable insert milling cutter (SKU S843-2TM) into production — phone +49 2822 7131930 or email info@metav-werkzeuge.com for technical matching and order support. Technical data Article number: S843-2TM Brand: Teknik Makina Product type: Indexable insert milling cutter Description: 35mm end mill for XNKT 0805 indexable inserts Facts Diameter: 35 mm Overall length: 130 mm Shank diameter: 32 mm Cutting length (shank): 40 mm Cutting edges: 4 Weight: 0.914 kg Torx key: T15 Torx screw: M4x10 Special features Compatible with XNKT 0805 indexable inserts Insert manufacturer compatibility: Korloy SKU: S843-2TM Label: 35mm Schaftfräser XNKT 0805 L130mm FAQ What inserts does this milling cutter use? The cutter is designed for XNKT 0805 indexable inserts; the specification allows the use of standard Korloy grades suitable for the intended material and cutting strategy. Is the tool suitable for heavy roughing operations? Yes. The combination of 35 mm diameter, a 32 mm shank and four cutting edges gives the mechanical stability required for robust roughing and shoulder milling tasks. Which fixing hardware is used for insert clamping? Insert clamping is secured with M4x10 Torx screws tightened using a T15 key to ensure repeatable and secure retention. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product data inconsistency detected: the item is listed as a "Vollbohrer" (solid drill) while the same record specifies compatibility with indexable inserts (SPMG 1104). These two designations imply different tool concepts and machining systems — a solid drill is a one-piece cutting tool, whereas an indexable-insert drill requires a holder and replaceable inserts. Because of this contradiction in the provided data, a reliable, production-ready product description cannot be generated. Please provide corrected or clarifying information (for example: confirm whether the item is a solid carbide drill or an indexable-insert drill body, and supply the exact insert type and holder specification if applicable) so that an accurate and compliant English product text can be produced.

Take advantage of the combination of precise insert compatibility, a robust shank and a secure fixing system to keep machining cycles reliable and efficient. Order the Teknik Makina S128TM through Metav Werkzeuge for dependable supply and expert advice. Insert milling cutter S128TM — Teknik Makina, Ø 35 mm with 25 mm shank A Shaft milling cutter S128TM configured for indexable TPKN 1103–2204 inserts, intended for medium‑duty face and slot milling in industrial workshops Compatible with TPKN 1103–2204 indexable inserts 35 mm cutting diameter for stable material removal 25 mm shank for rigid toolholding M6x17 fixing screw, 4 mm Allen key supplied Reliable insert system for consistent cycle times The body is engineered to accept TPKN 1103–2204 indexable inserts, providing a fast replacement routine and consistent cutting geometry. Using indexable inserts reduces downtime compared with regrinding solid cutters, which directly improves uptime and throughput. The two cutting edges supply balanced cutting forces, lowering vibration and enabling a steadier surface finish on typical engineering materials. The result is a stable, predictable tool life that supports continuous production planning. Rigid shank and secure fastening for dimensional accuracy A shank diameter of 25 mm gives a stiff connection to the spindle, which helps maintain concentricity and reduces deflection during cuts. The cutter is secured with an M6x17 fixing screw and a 4 mm Allen key, ensuring the insert seat remains firmly clamped. This simple, mechanical fastening reduces the risk of insert movement under load and keeps tolerances within expected limits, making the assembly suitable for repetitive tasks in jobbing and small‑batch production. Practical dimensions that speed setup and changeovers With a 35 mm cutting diameter and 120 mm overall length, the tool balances accessibility and reach without sacrificing rigidity. A 45 mm cutting length offers sufficient engagement for most face and shoulder operations while limiting overhang. The module’s modest weight (0.507 kg) assists with handling during tool changes and keeps dynamic loads on the spindle predictable. These proportions simplify tool selection and shorten machine setup times, contributing to faster changeovers on the shop floor. Clear benefits for process planners and machinists Choosing this cutter body supports a cost‑efficient tool strategy: replaceable inserts reduce per‑part tooling cost, while the design stabilises cutting conditions. The combination of insert compatibility and a robust shank benefits shops that require repeatable component quality without complex retooling. Technical staff will appreciate the straightforward mechanics and the ability to pair the body with common indexable grades for different materials and applications. Discuss the Teknik Makina S128TM insert milling body with Metav Werkzeuge to confirm insert compatibility and fast delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: S128TM Manufacturer: Teknik Makina Core measurements Cutting diameter: 35 mm Shank diameter: 25 mm Cutting length (shank): 45 mm Number of cutting edges: 2 Overall length: 120 mm Weight: 0.507 kg Fixing screw: M6x17 Wrench/key: 4 mm Allen key Special features For TPKN 1103–2204 indexable inserts Two‑edge insert configuration Compact overall length for reduced overhang FAQ What inserts fit this cutter body? The S128TM is specified for TPKN 1103–2204 indexable inserts, allowing rapid insert changes and straightforward grade swaps for different materials. Is the shank suitable for standard toolholders? Yes, the 25 mm shank is compatible with common collet and chuck toolholding systems that accept 25 mm shanks. How is the insert secured to the cutter? Inserts are clamped using an M6x17 fixing screw; the delivery includes a 4 mm Allen key for secure and repeatable tightening. Can this cutter be used for face milling and shoulder milling? The S128TM’s geometry and 45 mm cutting length make it suitable for both face milling and light shoulder operations where indexable inserts are preferred. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-based milling solution that combines a 35 mm cutting diameter with a 25 mm shank for stable clamping and predictable tool life; the three-edge configuration reduces machining time while maintaining surface quality. Order the shank milling cutter directly via Metav Werkzeuge or consult their advisors for application support. Shank milling cutter for RDMT 12T3 indexable inserts — 35 mm diameter, 25 mm shank (Teknik Makina) A shank milling cutter compatible with RDMT 12T3 indexable inserts, built for accurate face and shoulder milling in general machining environments. *Insert-compatible RDMT 12T3 *35 mm cutting diameter *25 mm shank for secure mounting *Three cutting edges for efficient removal Improve cycle times with insert-based efficiency The cutter’s insert system, designed for RDMT 12T3 indexable inserts, delivers repeatable cutting performance and fast service intervals. Using replaceable inserts means less downtime than regrinding solid-carbide tools; the toolholder geometry supports consistent chip formation so that machining remains stable across repeated operations. The result is measurable productivity gains when multiple short runs or mixed-batch work are typical. Secure mounting and predictable rigidity for stable cuts A 25 mm shank ensures secure clamping in standard toolholders and reduces runout compared with undersized connections. The combination of a solid shank and the cutter’s mass distribution helps maintain axial stability during moderate radial depths, which translates into improved surface finishes and longer insert life. The three cutting edges arrangement balances material removal and cutting forces for smoother machine behaviour. Practical dimensions that match workshop workflows With a 35 mm cutting diameter and a 40 mm cutting length, the cutter offers a compact footprint while providing sufficient engagement for many facing and slotting operations; the 120 mm overall length keeps reach without excessive overhang. The modest tool mass supports faster acceleration on smaller machining centres, aiding shorter cycle times and higher throughput when moving between operations. Clear service cues and fastening details for predictable maintenance Fastening components are standardised: a M3.5 locking screw and a M3.5x8.5 Torx screw secure the inserts, and the specified Torx size is T15, enabling repeatable torque and safe clamping. These standard sizes simplify workshop inventory and enable technicians to change inserts quickly. For planners, the tool’s weight of 0.485 kg helps calculate dynamic loads and toolchanger handling without guesswork. For robust, repeatable milling performance from Teknik Makina, contact Metav Werkzeuge for tailored application advice and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: R232TM Manufacturer: Teknik Makina Product: Shank milling cutter for RDMT 12T3 indexable inserts SKU: R232TM Facts Diameter: 35 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.485 kg Special features Compatible inserts: RDMT 12T3 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ What insert type is required for this cutter? The cutter is designed for RDMT 12T3 indexable inserts; matching inserts provide the intended cutting geometry and chip control. How many cutting edges does the tool have and what is the benefit? This shank milling cutter has three cutting edges, which balance removal rate and cutting forces for stable operation and improved surface quality. What shank size is needed for mounting? A 25 mm shank diameter is specified; the shank size supports secure clamping in compatible toolholders and helps limit runout. What fastening hardware does the cutter use? Insert clamping uses a M3.5 locking screw and a M3.5x8.5 Torx screw with a T15 Torx drive for repeatable tightening. Is the tool suitable for use on smaller machining centres? The compact 35 mm diameter and 120 mm overall length make the cutter appropriate for many small to medium machining centres where reduced overhang is an advantage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, indexable insert drilling solution that combines secure clamping, simple insert replacement and compatibility with Korloy WCM-06T3 inserts — order directly via Metav Werkzeuge or consult the technical team for matching tooling strategies. Indexable Drill U179TM – Ø35 mm, 32 mm shank (Teknik Makina) A purpose-built indexable drill Indexable Drill U179TM for precision holemaking with replaceable inserts in industrial machining environments. High-performance indexable system Compatible with Korloy WCM-06T3 inserts Ø35 mm cutting diameter 32 mm shank for secure clamping Consistent hole quality with fewer tool changes The indexable insert concept streamlines production by separating cutting geometry from the body of the tool. With a nominal Ø35 mm diameter and a cutting length 105 mm, this tool delivers consistent bore geometry while allowing rapid insert replacement when the cutting edges wear. The combination of replaceable inserts and a solid holder reduces overall tool consumption and simplifies inventory management, supporting continuous production with predictable tool life and maintenance intervals. Faster set-up and predictable machining results Designed for insert-mounted drilling, the tool accepts WCM-06T3 inserts from Korloy, enabling quick edge changes and standardised cutting data across multiple machines. The defined insert form and secure pocketing ensure repeatable positioning, which translates into reliable cycle times and fewer trial cuts. For production planners, the result is a measurable reduction in machine downtime and easier planning of consumables without compromising process stability. Secure clamping and improved process rigidity A 32 mm shank with an effective shank length 58 mm provides the mechanical support needed for stable operation and reduced vibration at the cut face. The tool’s total length 199 mm and an assembled weight of 1.082 kg contribute to axial stability, improving surface finish and concentricity when used with appropriate holders. Where machining accuracy and repeatability matter, this tool body design reduces chatter risk and supports consistent hole tolerances over extended runs. Integration into toolrooms and production workflows The indexable design simplifies tool management: fewer whole-tool replacements, lower storage costs for bodies, and standardised insert families across different diameters. The product is classified under ECLASS 21180201 for easy inclusion in procurement systems and tool libraries. Should further technical clarification be required, Metav Werkzeuge’s consultants can advise on matching holders, recommended feed and speed ranges, and compatible insert grades for the intended application. For technically reliable, insert-based drilling choose Teknik Makina’s indexable solution and contact Metav Werkzeuge in Emmerich for tailored tooling advice and stock availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: U179TM Manufacturer: Teknik Makina Product: Indexable drill Compatible inserts: WCM-06T3 (Korloy) ECLASS: 21180201 Facts Diameter: 35 mm Cutting length: 105 mm Total length: 199 mm Shank Ø: 32 mm Shank length: 58 mm Weight: 1.082 kg Special features Indexable insert system Compatible with Korloy inserts SKU: U179TM FAQ Which insert type fits this drill? The tool is designed for WCM-06T3 inserts from Korloy and accepts that insert form for straightforward replacement and positioning. What are the key dimensions for setup? The indexable body has a nominal diameter of 35 mm, a cutting length of 105 mm, a total length of 199 mm and a shank diameter of 32 mm (shank length 58 mm). Is this drill suitable for production use on CNC machines? The indexable design of the Indexable Drill U179TM is intended for industrial production and CNC workflows where insert replacement and repeatability are priorities. How does the indexable system reduce operating costs? By replacing worn inserts instead of the entire tool body, the system lowers tooling expenditure and simplifies inventory; the standardised WCM-06T3 insert family helps centralise consumable stock. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of 35 mm diameter and a 70 mm cutting length for reliable holemaking and efficient tool life; order directly via Metav Werkzeuge or contact the consultants for compatibility checks and fast delivery. Indexable drill U137TM (Vollbohrer) – 35 mm, 70 mm cutting length by Teknik Makina Indexable drill U137TM is designed as a heavy-duty drilling solution for CNC turning and milling applications, optimised for indexable inserts to deliver consistent hole quality in demanding production runs. 35 mm cutting diameter 70 mm effective cutting length 32 mm shank for secure clamping Compatible with Korloy WCM-06T3 inserts High-efficiency holemaking that reduces cycle time The body is engineered for a high metal removal rate while maintaining hole accuracy. With a 35 mm diameter and a 70 mm cutting length, the tool supports deeper passes without compromising stability, which reduces the number of tool changes per batch. This translates into measurable productivity gains on batch and single-piece flows. The design is suitable for applications where repeatable positional accuracy and consistent surface quality are required. Stable clamping and runout control for precise results A generous 32 mm shank and a 58 mm shank length give the holder a secure seat in the spindle, improving concentricity and lowering vibration. The overall length of 164 mm together with a total weight of 0.9 kg balances reachable depth with machine dynamics, reducing chatter and improving hole cylindricity. These mechanical characteristics directly benefit process reliability and lower scrap rates in series production. Indexable inserts for quick maintenance and consistent costs Compatibility with Korloy WCM-06T3 inserts allows for fast index changes and predictable tool consumption, keeping downtime to a minimum. The insert system permits economical regrinds and controlled tooling costs while delivering a consistent cutting geometry at each index. For operations aiming to optimise cost per hole and maintain throughput, the use of replaceable inserts is a pragmatic choice that supports continuous production. For detailed technical advice or to secure the Teknik Makina indexable drill U137TM with Korloy compatibility, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com for personalised procurement support and availability checks Technical data SKU: U137TM Manufacturer: Teknik Makina Designation: Indexable drill (Vollbohrer) Weight: 0.9 kg Core specifications Diameter: 35 mm Cutting length: 70 mm Shank diameter: 32 mm Shank/holder length: 58 mm Total length: 164 mm Special features Compatible insert: WCM-06T3 Compatible insert maker: Korloy Indexable insert system for fast replacement FAQ What material thickness and applications suit this drill best? The U137TM indexable drill is intended for standard production drilling tasks where a 35 mm diameter and 70 mm cutting length meet process depth requirements; it performs well in general steel and mixed-production environments when paired with the correct Korloy insert grade. Which inserts are required and are they included? The drill accepts WCM-06T3 indexable inserts from Korloy; inserts are specified separately and are not included with the drill body. How does the shank design affect machining stability? A 32 mm shank and 58 mm holder engagement provide improved clamping stability, which reduces runout and vibration compared with smaller shank sizes, thereby enhancing hole quality and tool life. Can this tool be used in automated spindle changers? The geometry and shank dimensions of the U137TM are compatible with standard spindle toolholders; confirm the holder interface dimensions on the machine and with Metav Werkzeuge for certainty. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust drilling solution that combines precise holemaking with rapid indexable-insert changes; the 35 mm diameter and 140 mm cutting length ensure consistent results across deep-hole applications. Order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Indexable insert drill (U635TM) by Teknik Makina — 35 mm diameter, 140 mm cutting length The Indexable insert drill is a purpose-built cutting tool for production drilling, designed for use in machining centres and lathes where secure clamping and rapid insert replacement are required 35 mm diameter for standard holemaking 140 mm effective cutting length 32 mm shank for secure toolholding Compatible with Korloy WCM-06T3 inserts Reliable hole quality through engineered geometry The drill body is designed to deliver repeatable results: the 35 mm nominal diameter and 140 mm cutting length maintain concentricity and bore tolerance over longer cycles, while the 32 mm shank enables stable clamping in standard holders. Using a rigid tool blank reduces chatter and helps to preserve insert life; for production runs this translates into fewer reworks and improved process stability. The construction is optimised for mechanical stiffness, which supports consistent bore form and surface finish in batch production. Fewer interruptions thanks to indexable inserts This tool accepts WCM-06T3 indexable inserts and is specified as compatible with Korloy grades, allowing fast edge changes without regrinding. The insert‑based approach keeps downtime to a minimum: worn edges are swapped in minutes, not hours, which is especially valuable for mixed-batch shops or high-throughput lines. The drill’s overall length of 234 mm and balanced mass (approx. 1.187 kg) have been selected to minimise overhang while providing sufficient reach for typical component geometries. Designed for straightforward integration into workshops The combination of a standard 32 mm shank and conventional insert clamping makes the tool straightforward to fit into existing toolholders and toolrooms. The body’s measured lengths — a 58 mm shank engagement and the specified cutting length — simplify fixture and programme setup, reducing the time spent on trial runs. For teams adapting to indexable tooling, the mechanical design supports predictable tool life and ease of stock management, enabling a smoother transition to insert-based drilling without reworking machine fixturing. Contact Metav Werkzeuge to specify the Teknik Makina indexable insert drill U635TM for production use — Metav’s specialists in Emmerich can advise on holder selection and process parameters; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U635TM Manufacturer: Teknik Makina Product name: Indexable insert drill (translated from Vollbohrer) Core specifications Diameter: 35 mm Overall length: 234 mm Cutting length: 140 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.187 kg Special features Compatible inserts: WCM-06T3 Compatible insert manufacturer: Korloy SKU: U635TM FAQ What insert type does the drill use? The indexable insert drill U635TM accepts WCM-06T3 inserts and is specified for use with Korloy insert grades. What are the critical dimensions for toolholding? Key dimensions are a 32 mm shank diameter and a 58 mm shank engagement; overall length is 234 mm and cutting length is 140 mm. Is the tool suitable for automated production cells? Yes, the tool’s standard shank and indexable inserts are intended for integration into machining centres and automated tool-change systems. How quickly can inserts be changed? Insert replacement is performed at the clamping seat and is designed for rapid changeover, reducing machine downtime compared with solid‑regrind solutions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the tool's combination of 35 mm diameter, 32 mm shank and long cutting length to maintain production flow with fewer tool changes and reliable hole quality; order the drill via Metav Werkzeuge or consult our specialists for application guidance. Vollbohrer — solid indexable drill, 35 mm diameter, 175 mm cutting length (Teknik Makina) A bold Vollbohrer engineered for indexable-insert drilling in demanding industrial setups, offering extended reach and secure toolholder clamping for stable machining. 35 mm diameter for large hole drilling 32 mm shank for secure toolholder clamping Compatible with Korloy WCM‑06T3 indexable inserts 175 mm cutting length for extended reach Stable clamping and vibration resistance for precise holes The drill's 32 mm shank and robust construction deliver improved rigidity that directly benefits hole accuracy and surface finish. A larger shank diameter reduces micro-movement in the toolholder, which in turn lowers vibration and runout during machining. For operations where concentricity and repeatability matter, this design reduces rework and inspection cycles while supporting consistent tool life. Longer cutting length minimises setup changes With a 175 mm cutting length and overall length 269 mm, the tool enables deeper or through-hole operations without additional extensions, reducing handling time and potential misalignments. Compatibility with Korloy WCM‑06T3 indexable inserts simplifies maintenance: worn inserts are swapped quickly, restoring cutting performance without replacing the entire tool. This approach keeps machines running longer between interventions and supports predictable production planning. Practical integration into industrial tool systems Designed for secure seating with a 58 mm shank length and weighing 1.227 kg, the drill balances handling convenience with robust dynamics in the turret or toolholder. The SKU U795TM identifies the configuration for procurement and spare-part control. Where tool-change frequency and inventory transparency are important, adopting a standard indexable solution streamlines tool management and reduces lead times for replacements. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Cutting Tools indexable drill into production and to arrange delivery from our Emmerich warehouse Technical data SKU: U795TM Manufacturer: Teknik Makina Designation: Vollbohrer Diameter: 35 mm Overall length: 269 mm Cutting length: 175 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.227 kg Compatible inserts: WCM-06T3 (Korloy) Files: 62de7ec30aced56449540eb2, 62de7dd80aced56449540e82 Core specifications Diameter: 35 mm Overall length: 269 mm Cutting length: 175 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.227 kg Features / Compatibility Compatible with Korloy indexable inserts WCM‑06T3 Solid indexable drill design for industrial machining Shank suitable for standard 32 mm toolholders File references available for documentation FAQ What insert type does the drill accept? The drill is configured for WCM‑06T3 indexable inserts; Korloy inserts of that designation are suitable for immediate use. Which shank and clamping dimensions are relevant for toolholder selection? The tool features a 32 mm shank with a 58 mm shank length, which should be matched to the machine's toolholder specifications. How deep can this tool drill without extensions? With a 175 mm cutting length and 269 mm overall length, the drill covers extended reach operations without additional extensions in many standard setups. How is the tool referenced for ordering and inventory? Order and stock under SKU U795TM; this identifier corresponds to the Teknik Makina indexable drill configuration listed above. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-performance drilling with a 35 mm diameter and 70 mm cutting length for deep, consistent holes, combined with a 32 mm shank for reliable clamping and vibration control. Order the indexable drill directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer U935TM – Indexable drill for production drilling, Ø 35 mm, 32 mm shank The Vollbohrer U935TM is an indexable drill body engineered for repeatable, high-output drilling tasks in machining operations, designed to accept SPMG 1104 insert geometry and to mate with standard toolholders. Ø 35 mm drilling diameter 70 mm cutting length for deep holes 32 mm shank for secure clamping Compatible with SPMG 1104 inserts Increased material removal with predictable results The indexable drill body offers a combination of Ø 35 mm diameter and a 70 mm cutting length, which enables longer engagement without changing tool geometry. This configuration is intended to maintain consistent chip formation and reduce cycle-time variance when compared with shorter drills. Because the cutting length is extended, the component of the drilling system that absorbs cutting forces is increased, which leads to more stable hole geometry and a lower rate of rework in series production. The compatibility with established insert geometries assists toolroom planners when sourcing replacement inserts. Rigidity and secure clamping reduce chatter and scrap A 32 mm shank and an overall length of 164 mm deliver a balanced axial profile for the toolholder, enhancing rigidity during deep drilling passes. The tool’s mass (approx. 0.845 kg) contributes to vibration damping, which in turn preserves insert life and improves surface finish. These characteristics support a setup where clamping repeatability and run-out control are paramount; the design of the shank-to-body interface is intended to be compatible with heavy-duty toolholders that secure concentricity and reduce the need for frequent rework. Compatibility with mainstream insert suppliers for operational continuity The drill body is manufactured to accept SPMG 1104-style inserts and is compatible with insert lines from Taegutec and YG-1, simplifying logistics for maintenance departments. Selecting inserts with a geometry and grade matched to the application—coated grades for abrasion resistance or tougher substrates for interrupted cuts—will determine cycle performance. The indexable system concept allows for rapid insert changes, minimising machine downtime while keeping consumable inventory aligned with major suppliers. Practical servicing and lifecycle advantages The indexable design reduces total tooling cost by separating the wear element—the insert—from the drill body. Insert replacement is quicker and more economical than regrinding a solid tool, supporting continuous production flow. The drill body’s dimensions and standard insert interface are intended to make reconditioning and replacement straightforward within a typical machining shop’s maintenance routine, enabling predictable tooling budgets and fewer unscheduled stops. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools indexable drill U935TM can be integrated into current drilling operations; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for personalised advice and ordering from Emmerich. Technical data Article number: U935TM Manufacturer: Teknik Cutting Tools Type: Indexable drill Diameter: 35 mm Overall length: 164 mm Cutting length: 70 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.845 kg Facts Drilling diameter: 35 mm Cutting length: 70 mm Overall length: 164 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.845 kg Special features Compatible insert geometry: SPMG 1104 Compatible insert manufacturers: Taegutec, YG-1 SKU: U935TM Files: 62de7ec3148ec6b71020ffa6, 62de7dd80f56dbb4de4dbede FAQ Which inserts fit this drill body? The indexable drill accepts SPMG 1104-style inserts; compatible insert ranges from Taegutec and YG-1 are recommended for the U935TM. What is the effective cutting length? The U935TM provides a cutting length of 70 mm, enabling deeper engagement while maintaining insert exchangeability. What shank diameter is required by the toolholder? A 32 mm shank diameter is specified for secure clamping and optimal rigidity with suitable toolholders. Is the drill body suitable for high-production environments? Yes, the indexable design and standard insert interface support rapid insert changes and predictable maintenance cycles for production use. How heavy is the tool and how does that affect stability? The tool weighs approximately 0.845 kg; this mass helps with vibration damping and contributes to stable drilling performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust indexable system designed for continuous production: the combination of a large Ø and long cutting length ensures efficient material removal with fewer tool changes, while compatibility with common insert makers simplifies sourcing. Order directly via Metav Werkzeuge or consult the team for technical guidance. Insert Drill U835TM by Teknik Makina — Ø 35 mm, SPMG 1104 compatible The Insert Drill U835TM is an indexable drilling solution intended for industrial metalworking where fast, repeatable holemaking is required Indexable system with SPMG 1104 inserts Ø 35 mm with 105 mm cutting length 32 mm shank for secure clamping Compatible with Taegutec and YG-1 inserts Increase throughput with a stable indexable system The Insert Drill U835TM combines an indexable cutting concept with a substantial tool body to keep production moving. The large Ø 35 mm and cutting length 105 mm permit deeper holes without immediate tool change, so component flow is maintained and set-up time is reduced. An indexable design means only the insert needs replacing when the cutting edge wears; this minimises tool inventory and lowers per-hole cost compared with solid tooling. For users unfamiliar with insert systems: the replaceable chip‑forming tip is clamped into the drill body, restoring cutting geometry instantly when rotated or replaced. Consistent hole quality and secure clamping for repeatability A 32 mm shank and solid tool geometry provide the rigidity required for repeatable hole accuracy across batch production. The stable shank diameter supports secure chucking or collet mounting, reducing vibration and improving surface finish. Compatibility with SPMG 1104 insert geometry ensures a predictable cutting edge form and easy access to replacement tips. Where process reliability matters, the indexable configuration delivers precision and repeatability while enabling rapid recovery from tool wear without recalibration of the spindle or fixture. Compatibility and serviceability that reduce downtime The tool’s overall dimensions — 199 mm overall length with a 58 mm shank engagement — balance accessibility and strength on typical machining centres. The insert seating accepts inserts from mainstream suppliers such as Taegutec and YG-1, simplifying procurement and stocking decisions. With a modest mass of 0.96 kg the drill is straightforward to handle during changeovers yet substantial enough for stable cutting. For bespoke process checks or clarification of machine‑specific suitability, Metav Werkzeuge provides technical support and further specification data by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Contact Metav Werkzeuge for tailored advice on the Teknik Makina insert drill and confirm that the Ø 35 mm solution integrates with the machining centre and inserts in use Technical data Article number: U835TM Manufacturer: Teknik Makina ECLASS: 21180201 Core measurements Diameter: 35 mm Overall length: 199 mm Cutting length: 105 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.96 kg Features / Compatibility Indexable inserts: SPMG 1104 Compatible insert makers: Taegutec, YG-1 SKU: U835TM FAQ Which insert type fits this drill? The drill accepts SPMG 1104 indexable inserts; replacements from Taegutec and YG-1 are compatible with the U835TM insert drill. What are the main dimensions of the tool? The U835TM has a diameter of 35 mm, a cutting length of 105 mm and an overall length of 199 mm; the shank diameter is 32 mm. Is the drill suitable for batch production? Yes, the indexable design and secure 32 mm shank provide the stability and quick insert changes required for repeatable, high‑volume holemaking. How are inserts sourced for this tool? Inserts in the SPMG 1104 format are widely available from Taegutec and YG-1, allowing straightforward procurement without bespoke tooling. Can the drill be used on standard CNC drilling spindles? The U835TM’s shank geometry and length are designed for common CNC chucks and holders; verification of holder compatibility is recommended before first use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a Ø35 mm cutting diameter, a secure Ø32 mm shank and compatibility with ADKT 1505 indexable inserts delivers efficient, repeatable milling performance for general workshop and production tasks. Order the shank milling cutter directly via Metav Werkzeuge or contact the consultants for application advice. Shank milling cutter S321TM — for ADKT 1505 indexable inserts, Ø35 mm (Teknik Makina) The Shank milling cutter S321TM is a durable milling body designed to accept ADKT 1505 indexable inserts for versatile face and shoulder milling in production and toolroom environments 35 mm cutting diameter for medium-depth milling Three-indexable cutting edges for stable cuts Ø32 mm shank ensures secure clamping Compatible with ISCAR ADKT 1505 inserts Faster cycle times through stable, multi-edge cutting The tool is engineered for reliable material removal: a three-edge indexable design maintains cutting balance and reduces vibration, which shortens cycle times and improves tool life. The Ø35 mm cutting diameter provides a practical balance between cut width and rigidity, enabling consistent removal rates in batch production. For operations migrating from solid cutters, the indexable system reduces downtime associated with regrinds while keeping tooling costs manageable. Secure clamping and simple insert changes for uptime A robust Ø32 mm shank ensures firm clamping in common toolholders, delivering axial and radial stability during interrupted cuts. Insert retention is achieved with an M4x10 Torx screw (Torx key T15), allowing quick, repeatable replacement of ADKT 1505 inserts supplied by ISCAR. The straightforward fastening method minimises setup time and supports predictable torque application, which contributes to consistent seating and repeat accuracy across tool changes. Clear compatibility and application range Designed for use with ADKT 1505 indexable inserts, the cutter body accepts industry-standard insert geometry, facilitating access to a wide range of grades and edge preparations. Compatibility with ISCAR-branded inserts supports high-performance grades for finishing and roughing alike. The tool’s overall length of 200 mm and 50 mm effective cutting length make it suitable for shoulder milling and shallow slotting where accessibility and rigidity are required. Built for workshop reliability and measurable handling At a weight of 1.252 kg, the shank milling cutter offers a stable feel during mounting and handling while remaining manageable for routine tool changes. The tool’s configuration favours repeatability: the indexable system and standard screw interface promote consistent seating, while the compact geometry aids in reducing overhang in the holder. These properties contribute to predictable tool behaviour that benefits process planning and quality control. For ordering, application planning or to request machining recommendations for ADKT 1505 inserts contact Metav Werkzeuge — Metav’s advisors can assist by phone on +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: S321TM Manufacturer: Teknik Makina Product: Shank milling cutter for ADKT 1505 indexable inserts Torx screw: M4x10 Torx key size: T15 Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length (shaft): 50 mm Number of cutting edges: 3 Overall length: 200 mm Weight: 1.252 kg Special features Indexable insert system: ADKT 1505 Insert compatibility: ISCAR Securing screw: M4x10 (Torx T15) Designed for face and shoulder milling FAQ What insert type does this cutter accept? The cutter accepts ADKT 1505 indexable inserts; the design is intended for this insert family and provides secure retention via an M4x10 Torx screw. How many cutting edges are used and what is the benefit? The cutter uses three indexable cutting edges; this configuration improves balance, reduces vibration and extends insert life under moderate cutting conditions. Which insert manufacturers are compatible? The tool is compatible with ISCAR ADKT 1505 inserts and with other manufacturers offering the same ADKT 1505 geometry. What are the key dimensions for holder selection? Key dimensions include a Ø32 mm shank, Ø35 mm cutting diameter and 200 mm overall length, which should be matched to the machine’s toolholder and reach requirements. How is the insert secured and what tool is required? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is required for tightening and loosening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable insert compatibility, compact dimensions and secure clamping for consistent machining results. Benefit from a robust shank, clear fitting specifications and direct support from Metav Werkzeuge for seamless integration into production. R240TM shank cutter — 35 mm diameter, 3 cutting edges (Teknik Makina) R240TM shank cutter for high‑productivity milling with RDMT 12T3 indexable inserts, suitable for general milling operations where quick insert changes and stable cutting are essential Compatibility with RDMT 12T3 inserts 35 mm cutting diameter for compact machining Shank Ø 32 mm, overall length 150 mm Faster metal removal with consistent chip control The R240TM is designed for dependable material removal thanks to its 35 mm cutting diameter and 3 cutting edges, which combine to deliver an efficient balance between stock removal and surface finish. Using RDMT 12T3 indexable inserts allows for rapid indexation and reduced downtime since inserts can be rotated or replaced without removing the holder. The tool’s cutting length of 45 mm supports deeper engagement where required, while the robust shank geometry maintains run‑out tolerance under load — an essential factor for reliable cycle times in batch production. Secure clamping for repeatable accuracy Stable insert retention is achieved through a clearly specified locking system: M3.5 locking screw together with an M3.5x8.5 Torx screw and a T15 Torx key for service operations. This fastener arrangement reduces micro‑movement at the cutting edge, improving repeatability and lowering the risk of chatter during interrupted cuts. The combination of a solid 32 mm shank and precise fastening means the cutter maintains its position in the toolholder, translating to predictable tool life and fewer scrap parts. Practical handling and workshop integration Weighing 0.9 kg and measuring 150 mm in overall length, the R240TM is compact enough for standard tool changers while remaining substantial for stable machining. The shaft and insert compatibility are specified to simplify shop planning: the tool accepts RDMT 12T3 inserts and uses standard Torx service tooling for maintenance. Where tool selection must be coordinated across a fleet, these clear specifications assist purchasing and maintenance planning, reducing downtime and ensuring a straightforward spare‑part inventory. For tailored advice on integrating the Teknik Makina R240TM shank cutter into existing setups, or for questions on insert selection and clamping parameters, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast supply. Technical data SKU: R240TM Designation: shank cutter for RDMT 12T3 indexable inserts Brand: Teknik Makina eClass: 21180806 ETIM: EC011860 Core dimensions Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 150 mm Weight: 0.9 kg Features & fittings Number of cutting edges: 3 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Compatible inserts: RDMT 12T3 FAQ What inserts does this cutter accept? The cutter is specified for RDMT 12T3 indexable inserts; these inserts are used for rapid indexation and straightforward replacement in the R240TM. Which shank and holder sizes suit this tool? The R240TM has a 32 mm shank diameter, matching holders designed for that shank size and ensuring a secure fit for stable machining. What fastening hardware is required for insert retention? Insert retention uses an M3.5 locking screw and an M3.5x8.5 Torx screw; a T15 Torx key is used for assembly and maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a compact T-slot milling solution that combines a 35 mm cutting diameter, compatibility with DCMT 11T3 indexable inserts and a rigid 20 mm shank for stable, repeatable results. Order via Metav Werkzeuge or request tailored application advice from our consultants for swift integration into production. T-Nut Cutter TKC248TM — 35 mm diameter, for DCMT 11T3 indexable inserts by Teknik Makina The T-Nut Cutter for DCMT 11T3 indexable inserts is engineered for accurate T-slot milling in workshop and light industrial settings, offering a balance of productivity and easy serviceability. 35 mm cutting diameter Compatible with DCMT 11T3 inserts 20 mm shank for rigid clamping 120 mm overall length for deeper slots Consistent material removal with replaceable inserts The 35 mm cutter diameter and the use of DCMT 11T3 indexable inserts deliver a predictable cutting geometry that supports uniform chip evacuation and surface finish. With two cutting edges and a 60° cutting angle, the tool reduces peak forces per tooth, which improves stability during slot formation. The replaceable insert system lowers per-cutting-edge cost and shortens downtime when an edge is spent, making the tool a rational choice where repeatable slot quality and economical maintenance matter. Secure clamping and straightforward insert replacement A 20 mm shank dimension ensures secure clamping in standard toolholders, reducing vibration and improving run-out behaviour. The cutter’s 120 mm overall length provides reach for deeper T-slots while maintaining rigidity. Insert retention is achieved via an M3.5x8.5 Torx screw; servicing requires a T15 Torx key for reliable torque and repeatable seating. These design aspects combine to minimise setup time and contribute directly to stable cycle times on the shop floor. Flexible tool strategy through insert selection Rather than committing to a single dedicated geometry, the indexable insert concept allows selection of insert grades and coatings matched to the workpiece material and cutting conditions. This flexibility means the milling head can be adapted from roughing to finishing tasks simply by changing the insert grade or geometry, supporting both efficiency gains and cost control. The modular approach enables workshops to plan tooling inventories pragmatically and to react quickly to different production demands. Practical handling and workshop guidance With a compact mass of 0.28 kg and a 30 mm cutting-head length, the cutter is simple to handle and integrates easily into manual and automated tool-change routines. The twin cutting-edge design spreads load across two surfaces, improving cutter life when compared to high-tooth-count alternatives in similar applications. Regular checks of the Torx screw seating and correct mounting torque are advised to secure the insert reliably; keeping a small stock of spare DCMT 11T3 inserts and a T15 key on the bench reduces unplanned stops and supports continuous operation. For application advice or to request a quotation for the Teknik Makina TKC248TM, contact Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for tailored support and rapid delivery. Technical data SKU: TKC248TM Article: 35 mm T-Nut cutter for DCMT 11T3 indexable inserts Manufacturer: Teknik Makina EClass: 21180605 Facts Diameter: 35 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length: 30 mm Number of cutting edges: 2 Cutting angle: 60° Weight: 0.28 kg Torx key: T15 Torx screw: M3.5x8.5 Design & features Compatible inserts: DCMT 11T3 Indexable insert system Replaceable cutting edges Rigid shank for vibration control FAQ Which insert type is required for this cutter? The cutter uses DCMT 11T3 indexable inserts; the TKC248TM head accepts that specific insert shape and seat geometry for correct positioning. What are the key dimensions for planning a tool set-up? The TKC248TM provides a 35 mm cutting diameter, 120 mm overall length and a 30 mm cutting-head length, with a 20 mm shank for holder compatibility. How are the inserts secured and serviced? Inserts are retained with an M3.5x8.5 Torx screw; servicing requires a T15 Torx key to achieve reliable clamping and repeatable assembly. How many cutting edges does the cutter have and what is the angle? The tool features two cutting edges and a 60° cutting angle, which balances chip formation and cutting force distribution. What maintenance is recommended to preserve cutting performance? Routine checks of insert seating and screw torque, combined with timely replacement of worn DCMT 11T3 inserts, will preserve surface quality and prolong tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise T-slot production with a 35 mm cutting diameter and compatibility with MGMN 200 indexable inserts, combined with a stable 20 mm shank for reliable clamping and repeatable results. Order the tool via Metav Werkzeuge or contact our consultants for application advice. T-slot milling cutter TKC296TM by Teknik Makina — 35 mm, L170 mm The T-slot milling cutter TKC296TM is designed for efficient machining of T-slots and T-nuts using MGMN 200 indexable inserts, offering a robust solution for fixture and table machining in milling centres. 35 mm cutting diameter Compatible with MGMN 200 indexable inserts 170 mm overall length for deep slots 20 mm shank with simple Allen clamp Accurate slot geometry for consistent assembly The cutter delivers a repeatable slot profile by combining a 35 mm nominal diameter with precisely positioned cutting edges. Using MGMN 200 indexable inserts means the effective cutting geometry is determined by the insert seat and clamping, so each replacement restores original tolerances quickly. This setup reduces scrap and rework, improving first-pass yield. For operations that demand consistent fitment of T-nuts, the rigid 20 mm shank ensures minimal deflection and steadier tool life, supporting reliable production runs. Economical tooling strategy with modular inserts By accepting standard MGMN 200 inserts produced by Korloy, the milling tool minimises overall tooling cost through replaceable cutting tips rather than full-head replacement. The cutter’s L170 mm overall length allows access to deeper slots without compromising rigidity. Such modularity shortens downtime during service intervals: worn inserts can be swapped in minutes, restoring cutting performance and maintaining throughput. This approach supports a predictable cost-per-slot calculation and sensible inventory management for production shops. Fast set-up and predictable maintenance routines Tool change and clamping are straightforward: insert fixing and the cutter body are serviced with a 6 mm Allen key for consistent torque and secure seating. Clear accessibility of the clamping screws simplifies routine checks and reduces set-up time at the machine spindle. With only two cutting edges and defined cutting-edge height, monitoring wear becomes easier and replacement intervals more predictable. The result is less unscheduled maintenance and more machine availability for productive machining cycles. Suited to fixture production and machine-table work This cutter is aimed at workshop applications where accurate T-slots are needed for clamping and assembly, such as fixture fabrication and machine-table refurbishment. The tool’s geometry and indexable concept provide a controlled approach to slot finishing: the insert profile dictates surface quality and dimensional stability, while the solid cutter body maintains alignment. For engineers planning production batches that require identical slot dimensions, this milling solution offers a stable, serviceable option that integrates with common insert stocking practices. For reliable T-slot production, request the Teknik Makina TKC296TM through Metav Werkzeuge — our specialists will advise on insert choice and application parameters; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical Data Article number: TKC296TM Label: 35mm T-Nut Fräser MGMN 200 L170mm Product type: T-slot milling cutter Manufacturer: Teknik Makina ECLASS: 21180605 Facts Diameter: 35 mm Overall length: 170 mm Shank diameter: 20 mm Cutting edges: 2 Cutting-edge height: 2 mm Special features For MGMN 200 indexable inserts Compatible insert manufacturer: Korloy Hex key: 6 mm Allen SKU: TKC296TM FAQ What insert type does this T-slot cutter use? The cutter accepts MGMN 200 indexable inserts; the TKC296TM is designed around that insert family for precise slot profiles. How is the cutter clamped in the spindle? The TKC296TM features a 20 mm shank for secure clamping in standard toolholders; final seating stability depends on correct holder selection and spindle setup. How are worn cutting edges replaced? Worn tips are exchanged individually: loosen the clamping screw with a 6 mm Allen key, replace the insert, and retorque to the specified setting to restore tool geometry. Is this tool suitable for deep T-slots? The cutter’s 170 mm overall length gives access to deeper slots than short cutters while maintaining adequate rigidity for typical fixture work. Can different insert grades be used with this cutter? Yes — as long as inserts conform to the MGMN 200 form and seat dimensions (Korloy and other manufacturers), different grades can be selected to match material and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise T-slot geometry, straightforward insert replacement and secure M16 mounting for reliable process stability. Order the cutter through Metav Werkzeuge for a streamlined supply chain and expert procurement support. T-slot cutter TKC276TM – 35 mm, for MGMN 200 indexable inserts (Teknik Makina) The T-slot cutter TKC276TM is a purpose-built milling tool for producing accurate T-slots with MGMN 200 indexable inserts, designed for integration into standard toolholders and high-repeatability production setups. 35 mm cutting diameter for deep T-slots Compatible with MGMN 200 indexable inserts M16 thread for secure attachment to toolholders 25 mm shank diameter for stable clamping Consistent slot geometry for assembly-ready parts The TKC276TM delivers repeatable slot dimensions by combining a stable 25 mm shank with a 35 mm cutting diameter and 2 cutting edges. Using MGMN 200 indexable inserts ensures predictable wear behaviour: once an insert is spent, it is replaced without regrinding, which reduces downtime and keeps cycle times steady. The specified 2 mm cutting edge height provides controlled chip evacuation in many standard T-slot profiles, helping to minimise secondary finishing and ensuring assemblies fit without additional machining. Robust mounting and quick setup for production use Designed for reliable repetition in workshop and industrial environments, the tool features an M16 thread for secure fixation and a compact 65 mm overall length that supports rigidity in the machining zone. The modest mass (0.128 kg) contributes to improved dynamic balance at moderate spindle speeds, while the 6 mm hex interface simplifies clamping operations during tool changes. These attributes combine to lower the risk of chatter and to support consistent surface quality, making the cutter a practical choice for batch production where uptime and predictability are priorities. Broad compatibility and predictable supply chain integration Compatibility with Korloy-type inserts and the standard MGMN 200 geometry allows seamless adoption in existing tooling systems and simplifies spare-part stocking. The tool’s configuration supports common toolholders and cutter blocks used in milling centres, which reduces the need for special adapters. Sourcing via Metav Werkzeuge leverages their European distribution base and quality filter in Emmerich, providing reliable inventory and documentation for procurement departments that require traceability and steady supply. Discuss procurement options for the Teknik Makina T-slot cutter with Metav Werkzeuge for tailored delivery and technical advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a specification review and supply plan Technical Data SKU: TKC276TM Product type: T-slot cutter Manufacturer: Teknik Makina Facts Diameter: 35 mm Shank diameter: 25 mm Overall length: 65 mm Weight: 0.128 kg Thread: M16 Cutting edges: 2 Cutting edge height: 2 mm Special features Suitable for indexable inserts: MGMN 200 Compatible insert manufacturer: Korloy Label: 35mm T-slot cutter MGMN 200 L65mm Allen key size: 6 mm FAQ What insert geometry is required for this cutter? The cutter accepts MGMN 200 indexable inserts; this geometry is specified for the TKC276TM and ensures correct seating and chip formation. Is the tool compatible with Korloy inserts? Yes, the TKC276TM is compatible with Korloy inserts matching the MGMN 200 profile. What shank and thread dimensions does the cutter use? The tool has a 25 mm shank and an M16 thread, providing a robust connection to common toolholders. How many cutting edges does the cutter have and what is their height? The cutter is manufactured with 2 cutting edges and a cutting edge height of 2 mm, optimised for standard T-slot profiles. What is the overall length and mass of the cutter? The TKC276TM measures 65 mm overall and weighs 0.128 kg, supporting stable machining dynamics. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a tool that combines precise 35 mm cutting capacity with compatibility for RD-- 0702 indexable inserts and a robust 25 mm shank to maintain stable, repeatable T-slot machining; order the cutter directly via Metav Werkzeuge or ask our consultants for application advice. T-slot cutter TKC176TM – 35 mm diameter, 120 mm overall length (Teknik Makina) The T-slot cutter TKC176TM is a purpose-built T-slot milling tool for machining standard T-slots with RD-- 0702 indexable inserts, engineered for production and workshop use with a 25 mm shank for secure clamping. 35 mm cutting diameter Compatible with RD-- 0702 inserts Five cutting edges for smooth material removal 25 mm shank for stable toolholding Precision and proven insert compatibility for consistent T-slot machining A dedicated T-slot milling cutter designed for repeatable results: the 35 mm cutting diameter in combination with support for RD-- 0702 indexable inserts yields a predictable machining cycle and consistent slot geometry. Indexable inserts mean the cutting geometry is factory-ground and easily replaceable, which reduces variability between parts. The provision of five cutting edges on the head balances material removal and insert life, so operators benefit from longer edge life and fewer interruptions for tool changes. Stable clamping and controlled overhang for improved surface quality Tool rigidity directly affects surface finish and accuracy. The TKC176TM’s 25 mm shank and 120 mm overall length minimise deflection in typical toolholders, reducing chatter and improving slot surface quality. A heavier, well-balanced cutter—at approximately 0.452 kg—also contributes to smoother cutting dynamics, allowing higher feed stability and better concentricity in production runs. The result is fewer reworks and a more reliable process window for workshop and CNC applications. Quick serviceability and clear workshop handling for less downtime The cutter is configured for indexable insert use and secured with a Torx screw (M2.5x5.5), serviceable with a T8 Torx key for swift insert changes and tightening. Quick insert replacement shortens maintenance time and keeps machines running longer between interventions. The product SKU TKC176TM identifies the exact configuration for reordering and inventory control, simplifying purchasing and ensuring the correct tool version is always used on the shop floor. Choose Teknik Makina quality: request the TKC176TM through Metav Werkzeuge for reliable, repeatable T-slot production or consult our specialists at Metav Werkzeuge for tailored machining recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TKC176TM Label: 35mm T-Nut Fräser RD-- 0702 L120mm Manufacturer: Teknik Makina ECLASS: 21180605 Facts Diameter: 35 mm Overall length: 120 mm Shank diameter: 25 mm Shank cutting length: 25 mm Cutting edges: 5 Weight: 0.452 kg Special features Compatible with RD-- 0702 indexable inserts Torx screw: M2.5x5.5 Torx key: T8 Product type: T-slot milling cutter FAQ Which indexable inserts are required for this cutter? The cutter is designed for RD-- 0702 indexable inserts; this configuration ensures the correct cutting geometry and straightforward replacement. How many cutting edges does the tool have and what is the benefit? The tool features five cutting edges, which balances material removal rate with insert life, offering smooth cutting and extended service intervals for the TKC176TM milling cutter. What shank size is recommended for secure clamping? A 25 mm shank is provided to ensure stable toolholding; use a compatible collet or holder matched to a 25 mm shank for optimal rigidity and reduced runout. How is the insert secured and which tool is needed for changeover? Inserts are secured with a Torx screw sized M2.5x5.5 and require a T8 Torx key for safe and quick changeover, minimising downtime during maintenance. Is the tool suited for workshop and small-series production? Yes; the combination of a 35 mm cutting diameter, robust 25 mm shank and indexable inserts makes the cutter suitable for both workshop tasks and small to medium production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com