ENMX08T316R-F47 WSM45X WSM45X Wendeplatten - Walter Tools
Benefit from the combination of coated carbide grade WSM45X, a 1.6 mm corner radius and a 0° negative rake for secure chip formation and prolonged tool life; order the ENMX08T316R-F47 WSM45X milling insert directly via Metav Werkzeuge or ask our consultants if needed. ENMX08T316R-F47 WSM45X – Milling insert, Rhombic 75°, 0° negative rake (Walter Tools) A ENMX08T316R-F47 WSM45X milling insert designed for machining stainless steels and heat‑resistant superalloys in demanding production environments. Suitable for stainless steels and superalloys Coated carbide grade WSM45X for heat resistance Rhombic 75° geometry with 1.6 mm corner radius 0° negative rake for stable cutting forces Durable chip control for difficult-to-machine alloys The WSM45X grade is a coated carbide engineered for materials that generate heat and build-up on the cutting edge. In this application the combination of coating and substrate offers stable chip formation and reduced adhesion when machining stainless steels and heat‑resistant superalloys, which means fewer interruptions for cleaning or edge reconditioning. For production lines where consistent chip flow matters, this insert contributes to predictable cycle times and lower scrap rates by keeping the cutting zone stable under elevated thermal loads. Geometry and edge design that improve process security The Rhombic 75° shape plus a 1.6 mm corner radius gives the insert both strength and versatility: the geometry spreads cutting forces over a larger area, improving edge life, while the corner radius supports finishing passes without chatter. The 0° negative rake promotes a robust cutting edge for intermittent or heavy cuts, reducing the risk of chipping in roughing operations. These characteristics combine to enhance process security—the reliable, repeatable behaviour necessary for industrial machining. Productivity gains through fewer tool changes and predictable wear By favouring edge stability and heat resistance, the WSM45X grade helps to extend tool life and reduce downtime caused by insert changeovers. The insert’s chipbreaker F47 is matched to the grade and geometry to encourage manageable chip segments under higher cutting temperatures, which supports automated chip handling systems and improves operator safety. The result is an improvement in overall equipment effectiveness (OEE) due to longer uninterrupted runs and more consistent component quality. Practical considerations and material compatibility This insert is available in size 08 with a thickness designation T3 and a tolerance class M, making it suitable for standard pocket designs in many indexable milling bodies. The grade is optimised for groups M and S per ISO classification, i.e. stainless steels and heat‑resistant superalloys/titanium‑based materials; it should be selected where thermal and mechanical loads on the cutting edge are high. For applications outside these groups, consult cutting data sheets to confirm suitability. For process-critical machining of stainless steels and superalloys, contact Metav Werkzeuge for tailored recommendations on cutting parameters, holder compatibility and stock availability; Metav Werkzeuge’s consultants are available to support tool selection and application optimisation. Technical data Article number: ENMX08T316R-F47-WSM45X-WALTER Name: ENMX08T316R-F47 WSM45X Numbers / Core technical data Corner radius: 1.6 mm Insert size: 08 Thickness: T3 Rake angle: 0° (negative) Shape: Rhombic 75° Chipbreaker: F47 Tolerance class: M Designs / Special features Grade: WSM45X (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Application groups: M (stainless steels), S (heat‑resistant superalloys / titanium) per ISO 513 Suitable for machining stainless steels and superalloys Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The ENMX08T316R-F47 WSM45X insert is designed primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering stable chip formation and edge life in these materials. How does the 1.6 mm corner radius affect surface finish? A 1.6 mm corner radius balances strength and finish: it supports robust cutting while enabling good surface quality on finishing passes when appropriate feeds and speeds are used with the insert. Is the insert compatible with standard 75° milling cutters? Yes, the Rhombic 75° shape and size 08 are compatible with indexable milling bodies designed for 75° geometry; holders must match the pocket and clamping method. What advantages does the WSM45X grade offer compared with general-purpose inserts? WSM45X is a coated carbide grade tailored for heat resistance and edge stability in difficult alloys, which leads to fewer tool changes and more consistent part quality under thermal stress. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ENMX08T316R-F47 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD performance, a robust 1.6 mm corner radius, and a rhombic 75° geometry to secure stable cutting and reliable chip control across Stahl, rostfreier Stahl and high-temperature alloys; order the insert directly via Metav Werkzeuge or contact the technical consultants for cutting trials and application advice. ENMX08T316R-F47 WSP45G — Fräswendeschneidplatte (Rhombus 75°, Tiger·tec Gold) — Walter Tools The ENMX08T316R-F47 WSP45G is a rhombic 75° milling insert designed for versatile milling of Stahl, rostfreier Stahl and heat-resistant alloys in demanding production environments Tiger·tec Gold PVD coating Versatile for Stahl, rostfreier Stahl, Titan Rhombic 75° form with 0° negative 1.6 mm corner radius for edge stability High-performance coating and material compatibility for consistent productivity The Tiger·tec Gold coating combined with the WSP45G grade delivers a wear-resistant, PVD-coated carbide that balances toughness and thermal stability. This combination is engineered to support predictable tool life during interrupted cuts and continuous milling alike. By specifying a grade optimised for the common ISO groups P, M and S, the insert provides consistent chip formation and reduced flank wear when machining unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant superalloys including Titan. The result is fewer tool changes, shorter setup times and improved machine utilisation—measurable benefits in cycle-time critical operations. Geometry and edge preparation that improve process security and surface quality The rhombic 75° shape with a 0° negative rake offers a stable cutting edge and predictable engagement in shoulder milling and slotting operations. The 1.6 mm corner radius increases edge strength and helps avoid premature chipping under moderate feeds, while the F47 chipbreaker is tuned for secure, controllable chip segmentation across mixed material runs. These geometric choices reduce vibration and support a repeatable surface finish, making the insert suitable where both dimensional fidelity and throughput matter. For programme planners and shop-floor supervisors, this translates into fewer rejects and a steadier production output. Practical selection and application guidance for process optimisation The insert thickness T3 and size designation 08 suit a wide range of cutter bodies and toolholders; tolerance class M indicates a machining precision compatible with standardised indexable tooling systems. When integrating the insert into a cutting process, prioritise stable clamping and appropriate feed per tooth to exploit the Tiger·tec Gold coating’s strengths. For mixed batches—where parts include Stahl, rostfreier Stahl and Titan components—the versatile grade reduces the need for frequent tool swaps and supports higher machine uptime. For further machining data or recommendations tailored to a specific milling centre, Metav Werkzeuge’s technical team is available to discuss cutting parameters and trial setups. Contact Metav Werkzeuge for availability, application advice and to discuss cutter body compatibility at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: ENMX08T316R-F47-WSP45G-WALTER Label: Fräswendeschneidplatte ENMX08T316R-F47 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Form: Rhombus 75° Size: 08 Thickness: T3 Corner radius: 1.6 mm Rake angle: 0° (negative) Chipbreaker: F47 Tolerance class: M Execution: X Facts Corner radius: 1.6 mm Rake angle: 0° (negative) Size designation: 08 Thickness code: T3 Tolerance: M Special features PVD-coated carbide grade WSP45G Suitable for ISO groups P, M, S Designed for milling applications and interrupted cuts Robust edge for enhanced tool life Optimised chip control with F47 chipbreaker FAQ What materials can this insert machine effectively? The ENMX08T316R-F47 WSP45G insert is specified for machining Stahl, rostfreier Stahl and heat-resistant superalloys (ISO groups P, M, S), offering reliable chip control across these material classes. Which coating technology is used and what does it deliver? The insert uses the Tiger·tec Gold PVD coating, which provides a balanced combination of wear resistance and thermal stability suitable for versatile milling tasks. What cutter geometries suit this insert? Its rhombic 75° form and 1.6 mm corner radius make the insert appropriate for shoulder milling, light ramping and slotting in standard indexable milling bodies compatible with size 08 inserts. How does the chipbreaker influence machining? The F47 chipbreaker is designed to produce short, consistent chips in a range of materials, improving evacuation and reducing the risk of built-up edge, which supports steady surface quality. Is this insert available for immediate delivery? Availability can be confirmed through Metav Werkzeuge; technical advisors can also recommend compatible cutter bodies and suggest initial cutting parameters based on the application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ENMX08T316R-G67 WSM35G Wendeplatten - Walter Tools
High thermal resistance and stable edge life from the Tiger·tec Gold grade WSM35G enable reliable machining of rostfreier Stahl and heat‑resistant superalloys; the Rhombic 75° geometry with a 1.6 mm corner radius and G67 chipbreaker balances productivity with consistent surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ENMX08T316R-G67 WSM35G milling indexable insert, Rhombus 75° for rostfreier Stahl and superalloys — Walter Tools A ENMX08T316R-G67 WSM35G milling indexable insert engineered for heavy‑duty and heat‑resistant material machining, featuring Tiger·tec Gold coating and a robust G67 chipbreaker Tiger·tec Gold coated carbide grade WSM35G Optimised for rostfreier Stahl and superalloys Rhombic 75° geometry for versatile milling Corner radius 1.6 mm for robust edge strength G67 chipbreaker with 0° negative rake Increased process reliability and edge stability for challenging alloys The Tiger·tec Gold WSM35G grade combines a wear‑resistant coating with a tough substrate to deliver consistent edge life when machining demanding materials such as rostfreier Stahl and high‑temperature superalloys. The coating technology improves heat resistance and reduces adhesion at the cutting edge, which supports a stable cutting process and lowers the risk of built‑up edge formation. With the combination of the G67 chipbreaker and the 0° negative rake, the insert sustains heavy cutting forces while maintaining predictable chip formation, leading to fewer interruptions, longer tool cycles and improved throughput in production environments. Geometry designed for balanced performance and surface quality The Rhombic 75° shape provides a versatile approach angle that aids in general milling tasks and allows flexible toolpath strategies. The 1.6 mm corner radius increases cutting edge robustness, offering a compromise between toughness and achievable surface finish; a larger radius protects the edge under interrupted cuts, while the rhombic form supports axial and radial engagement variations. The T3 thickness and plate size 08 ensure mechanical stability on standard toolholders. Together these geometric choices contribute to repeatable part quality and reduce the need for frequent insert changes in series production. Application support and economical machining strategy Designed for machining rostfreier Stahl (ISO group M) and heat‑resistant alloys/titanium (ISO group S), the insert delivers a practical balance between productivity and part integrity. The coated carbide construction and tolerance class M support processes where thermal load and material toughness are primary concerns. Integrating this insert into a machining cell can reduce cycle times and scrap rates when parameters are adapted to the material group; for controlled ramping of cutting data, Metav Werkzeuge can provide guidance on feeds, speeds and toolholder setup to achieve stable cutting without compromising tool life. Contact Metav Werkzeuge for tailored cutting data and to secure Tiger·tec Gold inserts from Walter Tools — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: ENMX08T316R-G67-WSM35G-WALTER Product type: milling indexable insert Manufacturer: Walter Tools Facts Size: 08 Corner radius: 1.6 mm Free rake: 0° (negative) Shape: Rhombus 75° Thickness: T3 Chipbreaker: G67 Special features Coating / grade: Tiger·tec Gold / WSM35G Material: coated carbide Suitable for: rostfreier Stahl (M), heat‑resistant superalloys and titanium (S) Series: Tiger‑tec Gold Tolerance class: M FAQ What materials is this insert suitable for? The ENMX08T316R‑G67 WSM35G insert is specified for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), where thermal stability and controlled chip formation are required. How does the G67 chipbreaker affect machining? The G67 chipbreaker on this Walter Tools insert promotes controlled chip formation and reduces the tendency for adhesion on the cutting edge, which helps to maintain consistent surface finish and prolong tool life under heavy cuts. Which geometry advantages does the Rhombic 75° offer? The Rhombic 75° geometry allows flexible engagement angles for both axial and radial milling passes, supporting versatile toolpath strategies and enabling a good compromise between cutting forces and surface quality. Is the insert suitable for interrupted cuts? Yes, the combination of the 1.6 mm corner radius and the coated carbide grade provides enhanced edge strength that is advantageous in interrupted cutting conditions typical for heavier milling work. What is the tolerance class and why does it matter? The tolerance class M indicates machining suitability and dimensional consistency for demanding applications; for this insert it supports predictable seating in toolholders and repeatable part production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no association between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
ENMX08T316R-G67 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a robust WSM45X coated carbide grade, a rhombic 75° geometry and a 1.6 mm corner radius to secure consistent chip formation and reliable cutting-edge stability across stainless steels and heat‑resistant alloys. Order directly via Metav Werkzeuge or contact our consultants for tailored cutting data and rapid availability. ENMX08T316R-G67 WSM45X – Milling insert (Walter Tools) for stainless and superalloy machining ENMX08T316R-G67 WSM45X is a rhombic 75° milling insert designed for high‑stress machining of stainless steels and heat‑resistant superalloys, delivering secure chip control and edge stability in demanding operations Coated carbide grade WSM45X for tough materials Rhombic 75° geometry for versatile milling 0° negative rake for secure cutting edge 1.6 mm corner radius for robust chip control Consistent performance on stainless steels and superalloys The combination of the WSM45X coated carbide grade and a purpose‑designed chipbreaker yields stable chip formation and extended edge life when machining ISO groups M (stainless steels) and S (superalloys and titanium). The coating and substrate are engineered to resist the high cutting temperatures and adhesive tendencies common with these materials, which reduces the frequency of insert changes and contributes to a more predictable production rhythm. For manufacturing environments where component quality and reproducibility are essential, this geometry and grade support process reliability and repeatable results. Geometry that improves machining security and surface quality The rhombic 75° form combined with a 0° (negative) rake provides a robust cutting edge that tolerates interrupted cuts and heavy cross‑feeding without premature edge degradation. The 1.6 mm corner radius helps distribute cutting forces and reduces the risk of chipping while supporting a controlled transition between passes. The integrated G67 chipbreaker is configured to break and evacuate swarf effectively in challenging materials, helping to avoid edge build‑up and maintain consistent surface finish during longer tool engagements. Practical setup and benefits in production Marked with size code 08 and thickness T3, the insert fits standard toolholders designed for this indexable geometry and offers straightforward indexation for quick replacement. The plate designation reflects its suitability for demanding operations: the insert is part of an open series optimised for productive machining across a broad material range. By selecting the correct cutting parameters and coolant strategy for ISO M and S materials, operators can exploit the insert’s advantages: reduced downtime, improved tool life and higher throughput in serial production. Advice for application and process integration When integrating this insert into an existing tool plan, consider conservative starting parameters to establish stable chip control, then increase cutting speed or feed cautiously as process behaviour is confirmed. The design is especially effective where secure cutting edges and good wear resistance are required under thermal load. For assistance with selecting matching holders or recommended cutting data for specific stainless or superalloy grades, technical consultants can provide targeted guidance to shorten trial phases and reduce scrap rates. For expert recommendations on Walter Tools inserts such as the ENMX08T316R-G67 WSM45X and to discuss suitable cutting data or availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, application‑focused advice Technical data Article number: ENMX08T316R-G67-WSM45X-WALTER Designation: ENMX08T316R-G67 WSM45X Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core dimensions Plate size: 08 Plate form: Rhombus 75° Corner radius: 1.6 mm Rake angle: 0° (negative) Plate thickness: T3 Tolerance class: M Materials and special features Carbide grade: WSM45X (coated carbide) Chipbreaker: G67 Material suitability: ISO M (stainless steels), ISO S (superalloys, titanium) Intended use: machining of stainless steels and heat‑resistant superalloys FAQ What materials is this insert intended for? The ENMX08T316R-G67 WSM45X milling insert (Walter Tools) is engineered for ISO group M (stainless steels) and ISO group S (heat‑resistant superalloys and titanium), offering secure chip control under high thermal and adhesive stress. What does the WSM45X designation signify? WSM45X denotes Walter Tools’ coated carbide grade optimised for heat resistance and stable cutting‑edge behaviour; the grade supports productive machining of tough materials while maintaining wear resistance. How does the 0° negative rake influence cutting? A 0° (negative) rake increases edge strength and reduces the tendency to chip in interrupted cuts or heavy engagement, resulting in more predictable tool life for the ENMX08T316R-G67 insert. Why is the G67 chipbreaker important? The G67 chipbreaker is designed to fragment and evacuate chips effectively when machining stainless steels and superalloys, aiding thermal control and preventing built‑up edge on the insert. Which features help improve process reliability? The combination of WSM45X coated carbide, rhombic 75° geometry, and a 1.6 mm corner radius enhances edge stability and chip control, contributing to consistent surface quality and reduced downtime for the ENMX08T316R-G67 milling insert. Protected trademarks and trade names mentioned are the property of their respective owners and are used here for identification purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product from the manufacturer. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ENMX08T316R-G67 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, a robust WSP45G grade and the stable Rhombic 75° geometry for consistent, productive milling across steels and high‑temperature alloys. Order the ENMX08T316R‑G67 WSP45G milling insert directly via Metav Werkzeuge or ask the consultants for specification support. ENMX08T316R‑G67 WSP45G milling insert — Rhombus 75°, Tiger·tec Gold (Walter Tools) ENMX08T316R‑G67 WSP45G is a negative‑relief rhombic milling insert engineered for versatile milling tasks in steel, stainless steel and heat‑resistant alloys Tiger·tec Gold coating for extended tool life Suitable for steel, stainless and superalloys Negative 0° relief for stable cutting Rhombic 75° form with 1.6 mm corner radius Consistent performance for mixed‑material machining The insert is built around the WSP45G grade within the Tiger·tec Gold family, a PVD‑coated carbide formulation that balances toughness and wear resistance. This combination makes the cutter especially effective for the ISO groups P / M / S — that is, unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. The PVD coating reduces flank wear and improves resistance to thermal loading, which translates into longer edge life and fewer indexings during production. For operations where a stable cutting edge and predictable tool life matter, the coated grade offers measurable gains in process reliability. Geometry and edge design for secure milling The Rhombic 75° shape and negative 0° relief are chosen to deliver secure seating and controlled radial engagement in diverse milling strategies. A 1.6 mm corner radius increases edge strength and spreads cutting forces, which reduces the risk of chipping when machining tougher materials or interrupted cuts. The integrated G67 chipbreaker promotes consistent chip formation and evacuation, improving surface quality and reducing recut risks. In practical terms, the geometry supports shoulder milling, side milling and moderate depth slotting while maintaining a robust edge for repeatable results. Operational advantages that reduce downtime Tolerance class M and insert thickness T3 ensure repeatable seating and replacement accuracy, supporting fast index changes and predictable run‑in behaviour. The insert’s designation and series conformity (Tiger·tec Gold) simplify grade selection and tool management within a production environment, enabling planners to standardise tool lists across mixed‑material jobs. Fewer premature edge failures and improved chip control contribute to lower tooling costs per component and higher overall equipment effectiveness. Where surface finish and dimensional consistency are required, the combination of geometry and coating reduces scrap rates and rework. Discuss the suitability of the Walter Tools ENMX08T316R‑G67 WSP45G insert with Metav Werkzeuge to ensure optimal grade selection and inventory planning — contact Metav Werkzeuge for expert advice. Technical data Article number: ENMX08T316R-G67-WSP45G-WALTER Designation: ENMX08T316R‑G67 WSP45G Product type: milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G (PVD‑coated carbide) Execution: X Shape: Rhombus 75° Chipbreaker: G67 Core data Corner radius: 1.6 mm Relief angle: 0° (negative) Size designation: 08 Thickness: T3 Tolerance class: M Applicable material groups: P / M / S Special features Coating: Tiger·tec Gold Grade details: WSP45G, coated carbide Material suitability: steel, stainless steel, superalloys/titanium Geometry benefits: rhombic 75° for versatile milling Chip control: G67 chipbreaker Series consistency: Tiger·tec Gold FAQ Which materials is this insert suitable for? The ENMX08T316R‑G67 WSP45G milling insert (Walter Tools) is formulated for machining steel, stainless steel and heat‑resistant superalloys/titanium, corresponding to the ISO groups P, M and S. What does the WSP45G grade offer compared with standard grades? WSP45G is a PVD‑coated carbide grade from the Tiger·tec Gold family that prioritises a balance of toughness and wear resistance; the coating improves thermal stability and flank wear resistance, extending edge life in demanding milling. For which milling applications is the rhombic 75° form especially suitable? The rhombic 75° geometry is well suited to shoulder milling, side milling and medium‑depth slotting; its profile provides a compromise between cutting edge strength and accessibility for angled approaches. How does a negative 0° relief affect machining behaviour? A negative 0° relief gives a more stable cutting edge, improves insert clamping security and helps manage cutting forces in heavy or interrupted cuts, which favours robust, predictable machining in production contexts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer (Walter Tools).
Fräswendeschneidplatte SDMW120408-A57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of a proven Tiger·tec Gold coating, robust chip control and optimised geometry for stable, productive milling operations — order the insert through Metav Werkzeuge or consult the team for application-specific advice. SDMW120408-A57 WKP35G milling insert — Tiger·tec Gold, square 90° by Walter Tools The SDMW120408-A57 WKP35G is a square 90° milling insert designed for versatile machining of steel and cast iron in medium to demanding production environments. SDMW120408-A57 WKP35G by Walter Tools Tiger·tec Gold coated carbide for long tool life For steel (P) and cast iron (K) machining 15° relief angle, 0.8 mm corner radius Consistent performance on steel and cast iron for reliable results The WKP35G grade from the Tiger·tec Gold family is a coated carbide designed to handle the thermal and mechanical loads typical of steel and cast iron cutting. The coating technology improves wear resistance and reduces adhesion, which translates into stable cutting behaviour and fewer unexpected tool changes. For production contexts where cycle times and surface quality matter, this grade offers a balance between durability and predictable tool life, supporting process planning and inventory control. Geometry engineered to deliver stable cuts and good surface finish A 90° square shape combined with a 15° relief angle and a 0.8 mm corner radius gives the insert mechanical robustness and edge strength. The geometry helps to distribute cutting forces and reduces the risk of chipping during interrupted cuts. The integrated chipbreaker A57 controls chip form for the typical chips produced when machining steels and cast irons, easing evacuation and reducing the chance of re-cutting. These features together improve surface finish and contribute to consistent part tolerances. Productivity gains through coating and grade selection The Tiger·tec Gold technology and the WKP35G designation aim for longer tool life and process security, which support higher component throughput and fewer tool interventions. The coated surface lowers friction and thermal load at the cutting edge, enabling more stable cutting parameters and higher productivity in serial machining. For operations that prioritise uptime and repeatable quality, the combination of this grade and chip control reduces downtime and helps maintain cycle-time targets. Practical guidance for integration and handling This insert is specified as insert size 12 and is supplied in the SDMW120408-A57 design; it fits cutters and holders compatible with this ISO-style reference. The square geometry provides multiple indexable edges, offering economical replacement intervals in many production set-ups. When selecting cutting parameters, match feeds and speeds to the machine capability and the workpiece grade; the SDMW120408-A57 insert is particularly suitable where a balance of edge strength and chip control is required. For specific toolholder matching or parameter recommendations, refer to tooling catalogues or contact the supplier for application data. For tailored application advice or to place an order for this Walter Tools Tiger·tec Gold insert, contact Metav Werkzeuge — Metav’s consultants provide material-specific recommendations and availability details Technical Details Article number: SDMW120408-A57-WKP35G-WALTER ISO designation: SDMW120408-A57 WKP35G Product type: milling insert (indexable) Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Insert form: Square 90° Insert size: 12 Thickness code: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: A57 Application: Steel (P) and cast iron (K) according to ISO 513 Execution: W FAQ Which materials is this insert designed for? The SDMW120408-A57 WKP35G milling insert by Walter Tools is designed for machining steel (P) and cast iron (K) in accordance with ISO 513 material groups. What does the WKP35G grade indicate? WKP35G denotes Walter Tools’ coated carbide grade within the Tiger·tec Gold family; it is formulated for balanced wear resistance and thermal stability during steel and cast-iron machining. What is the purpose of the chipbreaker A57? The A57 chipbreaker optimises chip formation for the typical chips from steels and cast irons, improving evacuation and reducing the risk of re-cutting or jamming. Can this insert be used for stainless steel or other alloys? The insert’s documented application covers steel and cast iron; suitability for stainless steel or harder alloys is not specified for WKP35G and should be confirmed with tooling specialists. Manufacturer/Responsible: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. The offered item is an original, factory-new product from the manufacturer.
GX09-0E170N01-UF8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold grade and the WSM23G cutting material for high process reliability and stable chip control when machining demanding alloys; benefit from the insert's robust edge and consistent performance for uninterrupted production. Order details and technical clarification are available from Metav Werkzeuge. GX09-0E170N01-UF8 WSM23G — Indexable turning insert, Tiger‑tec Gold, Walter Tools A GX09-0E170N01-UF8 WSM23G indexable turning insert engineered for productive machining of stainless steel and heat‑resistant superalloys. Tiger‑tec Gold coated, WSM23G grade Stable chip formation for tough alloys Optimised edge for stainless steel machining Increased cutting reliability for demanding components The Tiger‑tec Gold WSM23G grade provides a balanced combination of wear resistance and edge stability, especially suited to machining stainless steel and nickel‑based superalloys. The coated carbide composition ensures a controlled abrasion behaviour that reduces unexpected flank wear and extends tool life. By prioritising thermal robustness and reliable chip control, the insert supports consistent cycle times and fewer tool changes, which translates into measurable productivity gains on mixed‑material production runs. Predictable chip control and geometry advantages The geometry coded 0E170N01‑UF8 is designed to promote stable chip formation under high cutting temperatures typical of heat‑resistant alloys. Stable chips reduce process interruptions and improve surface integrity of finished parts. The combination of grade and geometry also lowers the risk of built‑up edge on sticky alloys, enabling secure roughing and finishing passes with predictable material removal rates. This technical approach reduces rework and supports tighter process windows in serial machining. Application guidance and machinability Optimised for ISO groups M and S, the insert suits operations where heat generation and material toughness present significant challenges. For machining stainless steel, the carbide coating limits work hardening at the cutting edge; for superalloys, the grade maintains cutting edge strength when temperatures peak. Practical machining recommendations include selecting lower depths of cut with stable feeds for finish passes and leveraging the insert's robustness for heavier finishes to reduce the number of tool assemblies required per part family. Process assurance, serviceability and brand reliability Walter Tools' integration of the Tiger‑tec Gold technology provides not only improved performance but also reproducible results across batches. The coated carbide grade supports consistent wear behaviour and repeatable edge retention, which simplifies tool management and batch planning. For production environments aiming to minimise downtime and maintain surface quality across long runs, the insert offers a balance of productivity and dependable edge life that contributes to process security and quality assurance. Contact Metav Werkzeuge for a tailored recommendation on insert selection and application parameters—call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss suitability for specific stainless steel grades and superalloy components. Technical data Article number: GX09-0E170N01-UF8-WSM23G-WALTER SKU: GX09-0E170N01-UF8-WSM23G-WALTER Designation: GX09-0E170N01-UF8 WSM23G Product type: Indexable turning insert Applicable groups ISO groups: M, S Features & materials Series: Tiger‑tec Gold Grade: WSM23G (coated carbide) Geometry / chipbreaker: 0E170N01‑UF8 Suitable for stainless steel and heat‑resistant superalloys Stable chip formation and optimised edge life Manufacturer: Walter Tools FAQ What materials is this insert designed for? The GX09‑0E170N01‑UF8 WSM23G insert is specified for ISO groups M and S, making it appropriate for stainless steel and heat‑resistant superalloys. How does the Tiger‑tec Gold coating affect performance? Tiger‑tec Gold coating on the WSM23G grade improves thermal resistance and wear behaviour, supporting longer edge life and more consistent results in demanding machining of stainless steel and superalloys. Can this insert be used for both roughing and finishing? Yes, the geometry and grade combination offers versatility for productive roughing and controlled finishing, depending on cutting parameters and machine stability. Manufacturer: Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
GX09-0E196N01-UF8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM23G grade for reliable machining of challenging materials; this insert delivers stable edge life and consistent chip control, keeping production stable and predictable—order directly via Metav Werkzeuge or ask the consultants for application advice. GX09-0E196N01-UF8 WSM23G indexable turning insert — Tiger·tec Gold, for rostfreier Stahl and superalloys (Walter Tools) GX09-0E196N01-UF8 WSM23G is an indexable turning insert optimised for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys Tiger·tec Gold coating for heat resistance WSM23G grade for rostfreier Stahl and superalloys Geometry 0E196N01-UF8 for stable chip control Walter Tools quality and repeatable performance Extended tool life through advanced coating technology The combination of the Tiger·tec Gold coating with a coated carbide substrate yields improved thermal resistance and wear behaviour compared with uncoated grades. The chemical and mechanical design of the coating reduces flank wear and supports a durable cutting edge, which leads to longer index lives in continuous and semi-continuous turning operations. For production planning this translates into fewer insert changes, less machine downtime and more predictable tool-change intervals, enhancing overall process efficiency. Reliable machining of rostfreier Stahl and difficult alloys Designed for materials classified under ISO 513 groups M and S, the grade WSM23G is formulated to control common issues such as built-up edge and poor heat dissipation when machining rostfreier Stahl and heat-resistant alloys. The specified geometry and chipbreaker code 0E196N01-UF8 promote consistent chip control, reducing contact between chip and toolface and lowering the risk of surface damage. The result is a stable component finish and reduced secondary operations for many turning applications. Integration into productive machining systems As an indexable turning insert from Walter Tools, this item fits established toolholders and cassette systems used in serial and batch production. The grade’s balance of toughness and wear resistance supports a broad application window, making it suitable for interrupted cuts and portions of long turning cycles alike. When selecting cutting parameters, prioritise thermal stability and feed consistency to maximise the benefit of the coating technology and to keep cycle times efficient. For specification support or to secure the GX09-0E196N01-UF8 WSM23G from Walter Tools, contact Metav Werkzeuge for detailed advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application optimisation and availability. Technical data Article number: GX09-0E196N01-UF8-WSM23G-WALTER Name: GX09-0E196N01-UF8 WSM23G — indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Grade: WSM23G Geometry / chipbreaker: 0E196N01-UF8 Applicable ISO groups: M, S Special features Coating: Tiger·tec Gold Material: coated carbide Suitable for: rostfreier Stahl, superalloys / heat-resistant alloys Application: heavy-duty machining and demanding turning operations Brand: Walter Tools FAQ What materials is this insert suitable for? The insert is specified for machining rostfreier Stahl and S-group materials (heat-resistant superalloys); the WSM23G grade and Tiger·tec Gold coating are engineered for those metal families. How does the 0E196N01-UF8 geometry affect performance? The geometry identified as 0E196N01-UF8 provides targeted chip control and promotes a stable cutting edge, which reduces built-up edge and improves surface quality during turning operations. Is this insert compatible with standard turning toolholders? Yes, the GX09-0E196N01-UF8 WSM23G is intended for common indexable turning systems and mates with compatible Walter Tools holders designed for this insert format. What production benefits can be expected from using this grade? Using WSM23G with Tiger·tec Gold coating typically leads to longer tool life and greater process stability, resulting in fewer tool changes and more consistent component quality. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX09-1E100L00-GD8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WSM23G grade for stable cutting edges and reliable chip formation in demanding turning operations; order original Walter Tools inserts via Metav Werkzeuge or request detailed application advice from the consultants at Metav Werkzeuge. GX09-1E100L00-GD8 WSM23G indexable turning insert — Tiger‑tec Gold, for rostfreier Stahl and superalloys — Walter Tools The GX09-1E100L00-GD8 WSM23G is an indexable turning insert designed for heavy‑duty machining of rostfreier Stahl and heat‑resistant superalloys/titanium, utilising the Tiger‑tec Gold coated carbide technology for improved edge stability. Tiger‑tec Gold coated carbide grade WSM23G Optimised for rostfreier Stahl and superalloys Robust cutting edge for stable chip formation Designed for secure performance in demanding turning High‑performance cutting for demanding materials The combination of the Tiger‑tec Gold coating and the WSM23G grade delivers a coated carbide solution optimised for rostfreier Stahl and heat‑resistant superalloys. This cutting grade is formulated to resist thermal and mechanical loads, which helps to maintain a stable cutting edge and consistent component quality under challenging conditions. The result is improved process security during continuous turning operations, with predictable tool behaviour and reliable chip control where conventional grades might fail. Productivity gains through edge stability and chip control A focus on secure chip formation and a robust rake/edge design reduces unplanned interruptions and contributes to longer effective tool life. The insert’s chipbreaker geometry (designation 1E100L00‑GD8) and the coated carbide substrate are matched to reduce built‑up edge and promote controlled chips when machining tough alloys. That combination supports higher process efficiency and repeatable surface finish, reducing the frequency of insert changes and enabling smoother production cycles in serial and batch turning. Clear application guidance and material compatibility The insert is specified for ISO 513 material groups M and S, meaning primary suitability for rostfreier Stahl (M) and for heat‑resistant superalloys and titanium (S). Selection of the final insert geometry and cutting parameters should consider component geometry and batch size; the chosen grade excels where thermal resistance and edge stability are decisive. For operations where workpiece material or cutting conditions vary, the insert’s coated carbide construction provides a broad capability that eases grade selection and increases process robustness. Practical procurement and quality assurance in production Supplied as an original Walter Tools product from the Tiger‑tec Gold series, this insert aligns with established standards of tool consistency and repeatability. Specification adherence and modern coating technology aim to deliver consistent performance across lots, supporting predictable machining outcomes. For application or batch planning, Metav Werkzeuge can provide further technical clarification and help integrate the insert into existing tool‑holding systems; additional assistance is available for matching insert geometry to turning strategy and workpiece material. Contact Metav Werkzeuge for tailored application advice and secure delivery of original Walter Tools Tiger‑tec Gold turning inserts for rostfreier Stahl and superalloy turning tasks Technical data Article number: GX09-1E100L00-GD8-WSM23G-WALTER Item label: Drehwendeschneidplatte GX09-1E100L00-GD8 WSM23G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Gold Grade: WSM23G Chipbreaker: 1E100L00‑GD8 Material designation: S / M ISO designation: GX09-1E100L00-GD8 WSM23G UID: GX09-1E100L00-GD8-WSM23G-WALTER Facts No additional numerical specifications provided Special features Coated carbide grade for high thermal and mechanical loads Optimised for rostfreier Stahl and heat‑resistant superalloys (ISO 513: M, S) Designed for stable cutting edge and secure chip formation From the Tiger‑tec Gold series by Walter Tools FAQ What materials is this insert best suited for? The GX09-1E100L00-GD8 WSM23G insert is intended primarily for rostfreier Stahl and for heat‑resistant superalloys and titanium (ISO 513 groups M and S), where the Tiger‑tec Gold coating provides thermal resistance and edge stability. How does the WSM23G grade improve turning performance? WSM23G, as a Walter Tools coating grade, combines a durable coated carbide substrate with a geometry optimised for stable chip formation, which increases process security and helps maintain consistent surface finish during demanding turning operations. Is this insert compatible with standard turning tool holders? The insert follows conventional indexable turning insert dimensions and can be used in compatible tool holders suited to the GX09 designation; confirmation of holder compatibility should follow the machine tool and holder manufacturer recommendations. Where to request application support or further technical data? Metav Werkzeuge can provide application advice and supplementary technical information for the Walter Tools GX09-1E100L00-GD8 WSM23G insert, including geometry matching and process recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. Mention of brand names serves explanatory purposes only; there is no affiliation between the seller and the brands. The offered article is original and factory new.
GX09-1E100R00-GD8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec® Gold coating and the WSM23G grade for improved edge stability and reliable chip control in demanding applications; order directly via Metav Werkzeuge or consult our specialists for tailored tool recommendations. GX09-1E100R00-GD8 WSM23G indexable turning insert – Tiger·tec® Gold (Walter Tools) The GX09-1E100R00-GD8 WSM23G is an indexable turning insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering high thermal stability and consistent cutting performance. Tiger·tec® Gold coated carbide WSM23G Designed for rostfreier Stahl and superalloys Stable cutting edge under thermal stress Consistent chip control and process security Optimised performance for high-temperature alloys The insert’s Tiger·tec® Gold technology combines a tailored coating system with a wear-resistant coated carbide substrate, delivering improved heat resistance and reduced flank wear during sustained cutting. The WSM23G grade is formulated for materials that generate high temperatures and strain the cutting edge, notably superalloys and rostfreier Stahl; this means fewer interruptions for tool changes and a more predictable production flow. The result is enhanced productivity when machining components where temperature build-up and built-up edge are common challenges. For users unfamiliar with coating terminology: the coating acts as a thermal and chemical barrier, reducing abrasion and diffusion that normally shorten tool life. Reliable edge life and secure chip control for continuous runs The integrated 1E100R00-GD8 chipbreaker geometry promotes effective chip formation and evacuation, which lowers the risk of re-cutting and workpiece damage. Combined with the inherent stability of the WSM23G grade, this geometry supports consistent surface finish and dimensional accuracy across longer tool life. In practice, this translates to fewer stoppages, reduced rework and a stable manufacturing process. Where process security is critical, the combination of dedicated chip control and an engineered grade contributes directly to predictable tool performance and lower overall machining costs. Application guidance and workshop handling Intended for the material groups designated S and M, the insert is particularly suited to machining superalloys/titanium (S) and rostfreier Stahl (M) depending on insert geometry and cutting conditions. Selection of rake, depth of cut and feed should be matched to the workpiece alloy and machine rigidity to exploit the insert’s edge stability. For less experienced operators, treating the grade as optimised for high-temperature, adhesion-prone materials is a reliable rule of thumb. When mounting, ensure the seat and clamping system are clean and that the insert is correctly orientated to maintain the designed chip flow; correct clamping maximises the benefit of the Tiger·tec® Gold coating and reduces the likelihood of premature edge failure. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec® Gold WSM23G inserts and receive application-specific recommendations for optimising rostfreier Stahl and superalloy machining Technical data SKU: GX09-1E100R00-GD8-WSM23G-WALTER Article designation: GX09-1E100R00-GD8 WSM23G Type: Indexable turning insert Grade: WSM23G Series: Tiger·tec® Gold Chipbreaker: 1E100R00-GD8 Material group: S / M Manufacturer: Walter Tools UID: GX09-1E100R00-GD8-WSM23G-WALTER Core data Applicable materials: rostfreier Stahl (M), superalloys/titanium (S) Coating technology: Tiger·tec® Gold Substrate: Coated carbide Special features Optimised for hard-to-machine alloys and, depending on geometry, rostfreier Stahl Stable cutting edge under thermal and mechanical stress Effective chip control via 1E100R00-GD8 chipbreaker Designed for continuous, process-secure production FAQ What materials is this insert suitable for? The GX09-1E100R00-GD8 WSM23G insert from Walter Tools is suitable for rostfreier Stahl (M) and heat-resistant superalloys/titanium (S), with the grade optimised for high-temperature and adhesion-prone materials. How does the Tiger·tec® Gold coating benefit cutting performance? The Tiger·tec® Gold coating on the WSM23G grade provides thermal and chemical protection to the carbide substrate, improving wear resistance and enabling more stable cutting behaviour under elevated temperatures. Which chipbreaker is fitted and what is its effect? The insert uses the 1E100R00-GD8 chipbreaker, engineered to fragment and evacuate chips reliably, which reduces re-cutting and supports consistent surface finish during extended runs. Is this insert appropriate for automated, long-run production? Yes, the WSM23G grade combined with its chip control features and Tiger·tec® Gold coating supports process security and extended tool life, making it suitable for continuous and automated production environments. Can the insert be used across different toolholder systems? The GX09-1E100R00-GD8 is a standard indexable turning insert form factor; compatibility depends on the chosen toolholder and seat geometry, so selection of a matching holder is necessary for proper clamping and performance. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, factory-new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
GX09-1E120L00-GD8 WSM23G WSM23G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coating and the WSM23G grade provides high thermal stability and prolonged edge life when machining stainless steels and superalloys; reliable chip control from the 1E120L00‑GD8 chipbreaker reduces rework and improves throughput. Order the GX09‑1E120L00‑GD8 WSM23G indexable turning insert directly via Metav Werkzeuge or ask their consultants for application advice. GX09-1E120L00-GD8 WSM23G indexable turning insert (Tiger‑tec Gold) by Walter Tools A GX09-1E120L00-GD8 WSM23G indexable turning insert designed for demanding applications in stainless steels and heat‑resistant superalloys Tiger‑tec Gold coated for thermal stability WSM23G grade — coated carbide performance Optimised 1E120L00‑GD8 chipbreaker for stable chips Suited for stainless steels (M) and superalloys (S) Boosted performance for difficult‑to‑cut materials The coated carbide WSM23G grade, integrated in the Tiger‑tec Gold series, is engineered for consistent cutting under high thermal loads. When machining stainless steels and heat‑resistant superalloys, the combination of a thermally robust coating and a stable substrate reduces edge wear and lowers the risk of built‑up edge. This leads to fewer interruptions in production and more predictable tool life, which supports efficient planning of tool changes and maintenance intervals. Controlled chip formation and surface consistency The 1E120L00‑GD8 chipbreaker geometry is optimised to produce short, manageable chips in materials that typically form long or stringy swarf. Improved chip control decreases the likelihood of secondary damage to the workpiece and tooling, while promoting a consistent surface finish. For operations where reproducibility and process stability matter, the geometry helps maintain cycle times and reduces downstream polishing or rework. Practical advantages for workshop productivity As an indexable insert, the component allows for rapid edge renewal without expensive regrinding, increasing uptime on lathes and turning centres. The coated Tiger‑tec Gold surface enhances thermal resistance, which is particularly beneficial in elevated cutting temperatures common with titanium and nickel‑base alloys. This results in a measurable improvement in cost per cutting edge and supports higher material removal rates in production settings. Integration into tooling systems and handling guidance The insert’s designation aligns with common clamping and pocket standards for indexable turning systems; the chipbreaker code and ISO designation facilitate correct seating and orientation in compatible toolholders. Proper mounting and torque settings maintain the integrity of the cutting edge and help achieve the expected performance of the WSM23G grade in serial production. Contact Metav Werkzeuge for tailored application recommendations and secure Walter Tools Tiger‑tec Gold inserts to raise process reliability in stainless and superalloy turning Technical data Article number/SKU: GX09-1E120L00-GD8-WSM23G-WALTER Name: GX09-1E120L00-GD8 WSM23G indexable turning insert Manufacturer: Walter Tools / Walter Deutschland GmbH Product type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger‑tec Gold Grade: WSM23G Chipbreaker: 1E120L00‑GD8 Material groups: S / M UID: GX09-1E120L00-GD8-WSM23G-WALTER Data No additional numeric specifications provided in the source data Special features Coating technology: Tiger·tec Gold Material of grade: Coated carbide Application: Stainless steels (M) and heat‑resistant superalloys / titanium (S) Benefit focus: Thermal stability, stable chip formation, improved edge life FAQ What materials is the GX09‑1E120L00‑GD8 WSM23G insert suitable for? The GX09‑1E120L00‑GD8 WSM23G indexable turning insert by Walter Tools is specified for stainless steels (M) and heat‑resistant superalloys and titanium (S), reflecting the grade’s design for high thermal and mechanical loads. How does the Tiger‑tec Gold coating affect cutting performance? The Tiger‑tec Gold coating on the WSM23G grade increases thermal resistance and reduces adhesion at the cutting edge, which enhances edge life and helps maintain consistent cutting conditions in demanding turning operations. What is the role of the 1E120L00‑GD8 chipbreaker? The 1E120L00‑GD8 chipbreaker geometry controls chip form to produce short, easily managed swarf in materials that otherwise form stringy chips, improving process reliability and surface consistency. Can the insert be used in standard indexable turning holders? Yes, the insert’s ISO designation and chipbreaker code facilitate integration into compatible toolholder pockets; correct seating and clamping ensure the expected performance of the WSM23G grade. What operational benefits can be expected from using this grade in production? Using the WSM23G Tiger‑tec Gold insert typically results in longer intervals between insert changes, more predictable tool life, and improved part quality when machining stainless steels and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX09-1E120R00-GD8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold durability, a specialised 1E120R00‑GD8 chipformer and suitability for tough-to-machine alloys to increase process stability and reduce unplanned tool changes — order genuine Walter Tools inserts directly via Metav Werkzeuge or contact our consultants for application support. GX09-1E120R00-GD8 WSM23G indexable turning insert — Tiger‑tec Gold coating, for stainless steel and superalloys | Walter Tools A robust GX09-1E120R00-GD8 WSM23G indexable turning insert engineered for heavy‑duty turning of rostfreiem Stahl (stainless steel) and heat‑resistant superalloys, delivering consistent chip control and long tool life. Tiger‑tec Gold coating for high wear resistance Designed for stainless steels and superalloys Stable cutting edge and secure chip formation 1E120R00‑GD8 chipformer for reliable swarf control Durable grade and coating for demanding materials The coated cemented‑carbide grade WSM23G, part of the Tiger‑tec Gold series, provides enhanced wear resistance and edge stability when machining materials that generate heat and tend to work‑harden. In practice this means improved tolerance to thermal loads and fewer unexpected edge failures when turning rostfreiem Stahl and heat‑resistant superalloys. The combination of substrate and coating supports secure chip formation and extends effective tool life, which reduces downtime and the need for frequent insert changes. Controlled swarf and consistent surface finishes The built‑in chipformer 1E120R00‑GD8 is engineered to manage swarf behaviour under the high temperatures and sticky chips typical of stainless steels and superalloys. By shaping the chips predictably and directing them away from the cutting zone, the insert helps maintain a steady cutting process and supports better surface quality. For users unfamiliar with chipformer terminology: a chipformer is a geometry feature on the insert that influences how the material is sheared and evacuated — essential for avoiding entanglement and tool interference during continuous turning. Workshop benefits: reliability, repeatability and efficiency Adopting this insert in production cycles yields practical advantages such as fewer process interruptions and more repeatable batch output. The WSM23G grade promotes a stable cutting edge, so cycle times remain consistent and rework is reduced. From a cost‑efficiency perspective, longer indexable life and fewer replacements translate into lower tooling overhead per component. For tailored cutting data or confidence that this insert matches a specific application, Metav Werkzeuge’s technical team is available to advise and supply genuine Walter Tools parts. Contact Metav Werkzeuge for application recommendations, cutting data and availability of genuine Walter Tools Tiger‑tec Gold inserts. Technical data SKU: GX09-1E120R00-GD8-WSM23G-WALTER Product type: indexable turning insert Grade: WSM23G Series: Tiger‑tec Gold Chipformer: 1E120R00‑GD8 Manufacturer: Walter Tools Facts Material designation: S / M Suitable for: rostfreiem Stahl (M), heat‑resistant superalloys/titanium (S) Coating technology: Tiger‑tec Gold Intended application: heavy‑duty turning and demanding materials Special features Coated cemented‑carbide insert Optimised chipformer for controlled swarf evacuation Designed for improved edge stability under thermal load Suited to applications prone to work‑hardening and high temperatures FAQ What materials is this insert suitable for? The insert is specified for machining rostfreiem Stahl (stainless steel) and heat‑resistant superalloys/titanium, corresponding to the ISO groups M and S, and uses the WSM23G grade to resist thermal and mechanical loads. How does the 1E120R00‑GD8 chipformer affect performance? The 1E120R00‑GD8 chipformer shapes and evacuates chips to prevent entanglement and maintain a steady cutting action, which improves surface finish and reduces the risk of tool interference during turning. Is this a coated insert and what benefit does the coating provide? Yes, the insert features the Tiger‑tec Gold coating technology; this enhances wear resistance and cutting‑edge stability under the high temperatures typical when machining stainless steels and superalloys. Can this insert help reduce tooling costs in production? By offering improved edge life and more consistent performance on demanding materials, the insert contributes to fewer replacements and lower tooling overhead per part, supporting a more economical production flow. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision metal‑cutting tools and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation purposes only and do not indicate any affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX09-1E140L00-GD8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM23G grade for reliable machining of heat‑resistant alloys and rostfreier Stahl; the optimised chipformer supports consistent chip control and extended tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. GX09-1E140L00-GD8 WSM23G — Indexable turning insert for rostfreier Stahl and superalloys | Walter Tools The GX09-1E140L00-GD8 WSM23G is an indexable turning insert from the Tiger·tec Gold series, engineered for demanding turning of rostfreier Stahl and heat‑resistant superalloys in production environments Tiger·tec Gold coated carbide grade WSM23G Optimised chip formation for tough alloys Stable cutting edge for high process security Durable coating and substrate for consistent cutting life The combination of Tiger·tec Gold technology and a coated carbide substrate provides a balance of wear resistance and thermal stability that reduces flank wear during continuous turning. This insert is manufactured to deliver stable cutting edges, which limits edge deterioration when machining abrasive or adhesive materials. For industrial users this means fewer unscheduled tool changes and a more predictable maintenance rhythm, supporting higher uptime and repeatable part quality. Reliable performance when machining rostfreier Stahl and superalloys Designed for the ISO groups S and M, the grade WSM23G is tailored to cope with the high temperatures and material stickiness characteristic of rostfreier Stahl and nickel‑based alloys. The chemistry and coating promote secure chip formation and minimise built‑up edge, so surface finish and dimensional stability are improved even under high thermal load. This reduces rework risk and supports consistent component tolerances in serial production. Chipformer geometry that improves process stability The supplied chipbreaker 1E140L00‑GD8 is optimised to divide and evacuate chips efficiently in continuous cutting operations. Clear chip control reduces heat concentration at the cutting zone and helps maintain a clean work area, which in turn supports safer and faster machining cycles. The geometry also contributes to a more uniform cutting force, which helps stabilise the machine–tool–workpiece interaction and enhances the reliability of automated turning cells. Productivity advantages for industrial machining As part of the Tiger·tec Gold range from Walter Tools, this insert emphasises process security and reproducible performance for heavy‑duty turning tasks. The product is aimed at production shops and contract manufacturers where throughput and consistency matter; adopting this grade can lead to longer tool life per edge and fewer interruptions for tool changes. The result is improved productivity with lowered variability in part quality over long runs. For machining rostfreier Stahl and heat‑resistant superalloys, contact Metav Werkzeuge for supply and tailored application support on the Walter Tools Tiger·tec Gold GX09‑1E140L00‑GD8 WSM23G insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: GX09-1E140L00-GD8-WSM23G-WALTER Label: Drehwendeschneidplatte GX09-1E140L00-GD8 WSM23G Walter Tools Manufacturer: Walter Tools Core data Grade: WSM23G Series: Tiger·tec Gold Substrate/coating: coated carbide Application codes: S / M (ISO 513) Special features Chipformer: 1E140L00-GD8 ISO designation: GX09-1E140L00-GD8 WSM23G Material applicability: rostfreier Stahl, heat‑resistant superalloys Product type: indexable turning insert FAQ What materials is this insert suitable for? The GX09‑1E140L00‑GD8 WSM23G insert is designed for machining rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), as specified by the WSM23G grade. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WSM23G grade enhances thermal and wear resistance, improving edge stability and extending service life during continuous turning with the Walter Tools insert. What is the role of the 1E140L00‑GD8 chipformer? The 1E140L00‑GD8 chipformer promotes reliable chip breakage and evacuation, which reduces thermal concentration at the cutting zone and supports consistent surface finish and tool life. Can this insert be used in automated turning cells? Yes; the insert’s combination of grade and chipformer is intended to provide process security and reproducible performance, making it suitable for automated and high‑volume turning operations. Is the insert compatible with standard turning toolholders? The ISO designation GX09‑1E140L00‑GD8 WSM23G identifies the insert geometry and fits holders that accept this indexable insert form; confirm holder compatibility with the tool manufacturer before assembly. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and product names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory‑new product of the manufacturer.
GX09-1E140R00-GD8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM23G grade to achieve stable cutting edges and reliable chip formation when machining stainless steels and heat-resistant superalloys; order the GX09-1E140R00-GD8 WSM23G turning insert directly through Metav Werkzeuge or consult our specialists for application advice. GX09-1E140R00-GD8 WSM23G turning indexable insert, Tiger·tec Gold coating for stainless steel & superalloys — Walter Tools GX09-1E140R00-GD8 WSM23G is a coated turning insert engineered for demanding applications in stainless steels and heat-resistant superalloys. Tiger·tec Gold coating for heat resistance Optimised chip control geometry 1E140R00-GD8 Suited for stainless steel and superalloys Stable cutting edge for productive turning Consistent machining performance for stainless steel and superalloys The combination of the Tiger·tec Gold coating and the WSM23G grade provides high thermal resistance and enhanced wear properties for turning operations in ISO groups M and S. The coated carbide makeup stabilises the cutting edge under high temperatures and heavy loading, helping to avoid built-up edge and prolong tool life. For workshops processing a range of corrosion-resistant steels and superalloys, this insert maintains dimensional consistency and reduces the frequency of tool changes, which supports continuous production workflows. Improved chip control and reduced rework An optimised chipbreaker 1E140R00-GD8 governs chip flow to prevent entanglement and minimise surface defects during interrupted cuts or challenging feeds. Reliable chip control lowers the likelihood of secondary operations and cleaning, improving cycle time and throughput. The insert’s geometry promotes predictable chip formation even when machining sticky stainless steels, so component quality and machine uptime are both enhanced without sacrificing cutting performance. Productivity gains through predictable tool life Selecting the right grade and coating delivers a demonstrable effect on process security and total machining cost. The WSM23G grade targets the balance between toughness and hardness, making it especially suitable for heat-resistant alloys and certain stainless steels where edge stability is crucial. This predictability reduces scrap and regrinds, and supports tighter planning of tool inventories. For production environments that prioritise repeatable results, the insert’s performance characteristics contribute to lower overall operating costs and steadier output quality. For tailored machining recommendations or to request GX09-1E140R00-GD8 WSM23G inserts from Metav Werkzeuge, contact our technical advisers at info@metav-werkzeuge.com or call +49 2822 7131930—technical support and order handling are available to assist with application-specific queries. Technical data SKU: GX09-1E140R00-GD8-WSM23G-WALTER Article: Turning indexable insert GX09-1E140R00-GD8 WSM23G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM23G Chipbreaker: 1E140R00-GD8 Material group: S / M UID: GX09-1E140R00-GD8-WSM23G-WALTER Specifications ISO groups: M (stainless steel), S (superalloys / titanium) Coating technology: Tiger·tec Gold Substrate: coated carbide Intended use: turning operations, general-purpose to heavy-duty in M and S materials Special features Heat-resistant coating for high-temperature stability Optimised chip control geometry for secure chip evacuation Robust cutting edge for reduced flank wear Wide material coverage for flexible production use FAQ Which materials is this insert best suited for? The GX09-1E140R00-GD8 WSM23G insert is designed for stainless steel (ISO M) and heat-resistant superalloys/titanium (ISO S), utilising the Tiger·tec Gold coating to maintain edge stability. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WSM23G grade increases thermal resistance and wear protection, giving the insert longer usable life and more consistent performance in demanding turning tasks. Is this insert recommended for interrupted cuts? Yes, the combination of the WSM23G grade and the 1E140R00-GD8 chipbreaker offers secure chip control and edge strength suitable for interrupted and heavy cuts in appropriate materials. How does the chipbreaker affect machining results? The 1E140R00-GD8 chipbreaker promotes controlled chip flow, which reduces the risk of surface damage and machine stoppages, enhancing overall process reliability with this insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) headquartered in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and brand names are the property of their respective owners; brand names are used solely for descriptive purposes. The offered article is an original, factory-new product from the manufacturer.
GX09-1E200N02-GD3 WKP23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKP23G grade for stable edge life and consistent chip control when machining steel and cast iron; order the insert via Metav Werkzeuge or consult the team for application-specific recommendations. GX09-1E200N02-GD3 WKP23G turning indexable insert — Tiger‑tec Gold for steel and cast iron, Walter Tools The GX09-1E200N02-GD3 WKP23G is an indexable turning insert engineered for productive finishing and medium‑turning of steel (P) and cast iron (K), combining a tailored chipbreaker with Tiger‑tec Gold coating for extended tool life. Tiger‑tec Gold coating technology WKP23G grade for robust edge life Optimised chip control for steel and cast iron Indexable design for consistent performance Consistent productivity for steel and cast iron machining This insert delivers predictable wear behaviour when machining both steel and cast iron, owing to the WKP23G grade designed for the specific thermal and abrasive challenges of these materials. The combination of substrate and coating reduces flank wear and maintains the cutting edge over longer tool life, which in turn lowers the frequency of tool changes and supports steady production cycles. For workshops focused on repeatability, the insert’s geometry ensures reliable chip formation and reduces the risk of built‑up edge. Tiger‑tec Gold coating extends service intervals The Tiger‑tec Gold technology provides a hard, wear‑resistant surface that improves resistance to abrasive and adhesive wear during interrupted and continuous cuts. This coating improves performance at elevated cutting temperatures and contributes to stable edge integrity, allowing higher cutting parameters in many applications. The result is an improved cost per part through longer interval between re‑grinds or replacements and a reduction in unscheduled downtime. Geometry and chipbreaker deliver predictable chip control The specified 1E200N02‑GD3 chipbreaker geometry was developed to produce short, controllable chips in a broad range of turning operations. That geometry promotes stable cutting forces and supports consistent surface quality while simplifying chip evacuation in both wet and dry machining. The indexable format enables quick seat changes and repeatable positioning, which is valuable where set‑up time and process stability are priorities. Practical application and process benefits In practical terms, the insert excels in finishing and medium‑depth turning operations on unalloyed and alloyed steels and a wide range of cast irons. It supports manufacturers seeking to balance surface finish requirements with tool longevity, and it suits operations that prioritise repeatable component quality. For those evaluating tooling options, matching cutting data to the insert’s capabilities will unlock higher machining efficiency and reliable batch‑to‑batch consistency. Request a tailored cutting‑tool recommendation from Metav Werkzeuge for the Tiger‑tec Gold insert GX09-1E200N02-GD3 WKP23G to secure optimised machining performance for steel and cast iron and to receive specific cutting data for the application. Technical Data SKU: GX09-1E200N02-GD3-WKP23G-WALTER Article designation: GX09-1E200N02-GD3 WKP23G Product type: Turning indexable insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WKP23G Chipbreaker: 1E200N02‑GD3 Applicable material groups: P / K Special features Coating technology: Tiger‑tec Gold (coated carbide) Material compatibility: Steel, cast iron Indexable design for repeatable seating and quick changes Optimised chip control geometry FAQ What materials can this insert machine effectively? The GX09-1E200N02-GD3 WKP23G insert by Walter Tools is designed for machining steel (P) and cast iron (K), with the grade and geometry optimised for the thermal and abrasive conditions typical of these groups. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold coating on the GX09-1E200N02-GD3 WKP23G reduces abrasive and adhesive wear, improving edge stability and extending service life, which supports longer production runs with fewer tool changes. Is the chipbreaker suitable for finishing operations? Yes, the 1E200N02‑GD3 chipbreaker provides controlled, short chips and stable cutting forces, making the insert appropriate for finishing and medium‑depth turning where surface finish matters. Can the insert be used with higher cutting speeds? The combination of the WKP23G grade and Tiger‑tec Gold technology allows for elevated cutting parameters in many steel and cast iron applications, leading to improved process efficiency when appropriate cutting data are applied. Which product family does this insert belong to and who supplies it? This insert belongs to the Tiger‑tec Gold family and is supplied under the Walter Tools brand as the GX09-1E200N02-GD3 WKP23G indexable turning insert. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX09-1E200N02-GD3 WSM33G Tiger-tec Gold Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the WSM33G carbide grade ensures stable cutting edges and improved productivity when machining stainless steels and superalloys; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations GX09-1E200N02-GD3 WSM33G turning insert — Tiger·tec Gold, suited for stainless steels and superalloys | Walter Tools A GX09-1E200N02-GD3 WSM33G turning insert designed for productive machining of tough-to-cut materials, combining a wear-resistant coating with a carbide substrate for reliable edge behaviour across demanding operations Tiger·tec Gold coating for extended tool life Optimised for stainless steels and superalloys Coated carbide grade WSM33G for stable cutting edges Higher productivity on demanding workpieces The combination of the Tiger·tec Gold coating with a high-performance coated carbide substrate delivers measurable productivity benefits when turning difficult materials. The coating increases wear resistance and thermal stability, which allows for higher cutting speeds and longer intervals between index changes. This improves uptime and reduces non-productive time, leading to a more efficient production flow without compromising component quality. Consistent surface finish and predictable machining results The WSM33G grade is formulated to maintain edge stability under the thermal and mechanical loads typical of stainless steels and high-temperature alloys. Stable edges reduce the risk of built-up edge formation and support consistent chip control, which in turn produces a uniform surface finish and fewer rework cycles. The result is predictable tool life and reliable batch-to-batch repeatability for precision turning tasks. Application guidance for stainless and superalloy turning Designed for the ISO groups M and S, the insert is especially suitable for stainless steels (M) and heat-resistant superalloys and titanium (S). These materials demand tools that resist high temperatures and preserve the cutting edge; the insert’s geometry and chipbreaker code 1E200N02-GD3 support secure chip formation and evacuation depending on the chosen cutting parameters. For specific machine settings and optimal feeds or speeds with this turning insert, refer to Metav Werkzeuge’s application support or request a tailored recommendation. For machining challenging materials with confidence, contact Metav Werkzeuge for a tailored application recommendation based on the Tiger·tec Gold WSM33G grade — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: GX09-1E200N02-GD3-WSM33G-WALTER Brand: Walter Tools Product type: Turning insert (indexable insert) Grade: WSM33G Series: Tiger·tec Gold ISO designation: GX09-1E200N02-GD3 WSM33G Facts Applicable material groups: S (superalloys, titanium), M (stainless steels) Chipbreaker / geometry: 1E200N02-GD3 Material family: Coated hardmetal (carbide) Special features Coating technology: Tiger·tec Gold Optimised for secure chip formation High thermal and wear resistance Designed for demanding turning operations FAQ What materials is this insert best suited for? The GX09-1E200N02-GD3 WSM33G insert is optimised for stainless steels (ISO group M) and heat-resistant superalloys or titanium (ISO group S). How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold increases wear resistance and thermal stability, allowing the WSM33G grade to sustain higher cutting speeds and longer edge life in tough applications. Is this insert suitable for finishing or roughing operations? Depending on the chosen geometry and cutting parameters, the insert can be applied to both finishing and productive turning operations; the chipbreaker 1E200N02-GD3 supports controlled chip formation for a range of conditions. What benefits can be expected for surface quality? The WSM33G grade promotes edge stability and reduced built-up edge, which contributes to consistent surface finishes and fewer rework cycles. Where to get application support for machine settings? Application-specific recommendations and cutting data are available through Metav Werkzeuge; the insert’s performance depends on machine capability and chosen cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademarked names and product designations are the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
GX09-1E200N02-GD3 WSM43G WSM43G Wendeplatten - Walter Tools
Benefit from the combination of thermal-resistant coating and a stable cutting edge for reliable machining of challenging alloys; the insert offers consistent chip control and long edge life — order the GX09-1E200N02-GD3 WSM43G insert via Metav Werkzeuge or consult our specialists for application guidance. GX09-1E200N02-GD3 WSM43G Drehwendeschneidplatte — Tiger·tec Gold coated turning insert with 1E200N02-GD3 chipbreaker by Walter Tools A GX09-1E200N02-GD3 WSM43G turning insert designed for secure machining of rostfreier Stahl and heat-resistant superalloys, offering a coated-carbide grade optimised for process stability. Tiger·tec Gold coating for thermal stability WSM43G coated carbide grade for tough materials Chipbreaker 1E200N02-GD3 for consistent chips Designed for rostfreier Stahl and superalloys machining Built for thermal resistance and edge stability The Tiger·tec Gold technology combined with the WSM43G grade delivers a coated carbide solution aimed at demanding turning operations. The high-performance coating increases heat resistance and reduces adhesion at the cutting edge, which supports stable cutting edge behaviour under elevated temperatures. This means fewer interruptions for edge changes and improved process security when working with materials that tend to work-harden or generate heat, such as rostfreier Stahl (stainless steels) and high-temperature alloys. Precise chip control for uninterrupted production The integrated chipbreaker 1E200N02-GD3 geometry enables reliable chip control, producing predictable chip shapes across varying depths of cut and feeds. Predictable chip formation reduces the risk of entanglement and improves surface finish consistency, translating into fewer stoppages and easier downstream handling. The coated-carbide substrate and specific chipformer design support repeatable results on both continuous and intermittent cutting paths, making the insert suitable for serial production and mixed-batch workflows. Application-driven benefits and process alignment As a turning insert from Walter Tools’ Tiger·tec Gold series, this plate is particularly suited to operations that prioritise process security and tool life. The grade is optimised to resist the thermal and mechanical demands of machining rostfreier Stahl and superalloys, where thermal conductivity and edge wear are critical. Integration into standard turning toolholders is straightforward, and the insert’s geometry supports stable engagement, helping to maintain component tolerances and surface quality over extended running times. For specific recommendations on holder selection, cutting parameters and to request sample tests for the GX09-1E200N02-GD3 WSM43G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-matched solutions Technical data Article number: GX09-1E200N02-GD3-WSM43G-WALTER Designation: GX09-1E200N02-GD3 WSM43G Series: Tiger·tec Gold Grade: WSM43G Chipbreaker: 1E200N02-GD3 Material group: S / M Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts ISO material groups: S, M Suitable for rostfreier Stahl: yes Coating technology: Tiger·tec Gold Substrate: coated carbide Special features Coated carbide grade WSM43G Chip control geometry 1E200N02-GD3 Optimised for rostfreier Stahl and superalloys Brand: Walter Tools FAQ What materials is this insert designed to machine? The GX09-1E200N02-GD3 WSM43G insert from Walter Tools is designed for machining rostfreier Stahl (stainless steels) and heat-resistant superalloys, corresponding to ISO groups M and S. What advantage does the Tiger·tec Gold technology provide? Tiger·tec Gold, applied to the WSM43G grade, increases thermal resistance and reduces adhesion at the cutting edge, improving tool life and process stability in demanding turning operations. How does the 1E200N02-GD3 chipbreaker improve production? The 1E200N02-GD3 chipbreaker produces predictable chips and supports consistent chip control, which reduces interruptions, improves surface finish and eases chip evacuation in serial machining. Is the insert compatible with standard turning holders? Yes, the GX09-1E200N02-GD3 WSM43G insert is intended for standard turning toolholders compatible with this insert geometry and can be integrated into existing setups for improved process security. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX09-1E200N02-UF4 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the high-temperature stability and proven chip control of this coated carbide insert to increase throughput and reduce interruptions; order directly via Metav Werkzeuge or consult the team for application-specific advice. GX09-1E200N02-UF4 WSM33G turning indexable insert — Tiger·tec Gold for stainless steels and superalloys | Walter Tools The GX09-1E200N02-UF4 WSM33G is a coated turning insert designed for heavy and demanding machining of stainless steels and heat-resistant superalloys, offering high thermal stability and consistent cutting-edge performance Tiger·tec Gold coating for enhanced heat resistance Optimised grade WSM33G for stainless steels and superalloys Stable cutting edge for secure chip control Coated carbide for extended tool life Increase process reliability through thermal stability and coating technology The Tiger·tec Gold series is engineered for applications where temperature and edge integrity are decisive. With the WSM33G grade and a coated carbide substrate, this insert resists thermal softening and maintains a robust cutting edge when turning stainless steels and difficult-to-machine superalloys. The coating improves oxidation resistance and reduces adhesion, which together lower the risk of built-up edge and unplanned rework. For production environments seeking predictable tool life and reduced tool changes, the combination of a heat-resistant coating and an optimised grade supports a stable machining window and repeatable component quality. Better chip control and fewer interruptions for higher productivity The chipbreaker designation 1E200N02-UF4 identifies the insert geometry tuned to secure chip formation under heavy loads. Consistent chip detachment reduces the likelihood of entanglement and improves surface integrity, resulting in fewer machine stops and faster cycle times. The insert’s geometry and grade promote controlled wear progression, which simplifies process monitoring and tool-change planning. Leveraging this insert in serial production can decrease secondary operations and enhance overall throughput while maintaining good surface finish for downstream assembly or finishing steps. Versatile application advice and practical handling for workshop use This indexable insert fits standard turning toolholders compatible with the GX09 family designation and is suitable where stainless steels and high-temperature alloys are the primary workpiece materials. Due to its focus on toughness and thermal resistance, the insert is particularly effective when machining work-hardening stainless grades or nickel-based alloys where heat generation is high. For first-time integration, test at conservative speeds with progressive increases while monitoring tool wear and chip form; small adjustments to feed can markedly improve chip evacuation. For specific machining parameters or compatibility with a particular holder, Metav Werkzeuge provides application guidance and technical data to fine-tune cutting conditions. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to discuss the best grade and geometry for the intended application Technical Data Article number: GX09-1E200N02-UF4-WSM33G-WALTER Name: GX09-1E200N02-UF4 WSM33G Manufacturer: Walter Tools Product type: Turning indexable insert Facts Grade / series: WSM33G — Tiger·tec Gold Chipbreaker: 1E200N02-UF4 Material suitability: M (stainless steels), S (superalloys / titanium) Material base: coated carbide Special features Coating technology: Tiger·tec Gold Optimised for heat resistance and stable cutting edge Designed for secure chip control Intended for heavy and difficult-to-machine materials FAQ What materials is this insert suitable for? The GX09-1E200N02-UF4 WSM33G insert from Walter Tools is suitable for stainless steels (ISO group M) and heat-resistant superalloys/titanium (ISO group S). How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on this Walter Tools insert improves oxidation resistance and edge stability, which helps maintain cutting performance under elevated temperatures and reduces built-up edge formation. Which chipbreaker should be selected for medium-heavy turning of stainless steel? The chipbreaker 1E200N02-UF4 integrated in this insert is designed to provide controlled chip formation for medium to heavy turning operations in stainless steels, promoting safer chip evacuation and better surface finish. Can the insert be used for finishing operations? Depending on geometry and cutting parameters, the grade WSM33G can achieve good surface quality; adjust cutting speeds and feeds to favour finishing while monitoring tool wear for consistent results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
GX09-1E200N02-UF4 WSM43G WSM43G Wendeplatten - Walter Tools
A high-performance turning insert that combines Tiger·tec Gold coating with the WSM43G carbide grade to deliver secure chip formation and reliable edge stability when machining stainless steels and heat-resistant alloys. Order directly via Metav Werkzeuge or consult our specialists for tailored application advice. GX09-1E200N02-UF4 WSM43G turning insert — Tiger·tec Gold for stainless steels and superalloys (Walter Tools) GX09-1E200N02-UF4 WSM43G is an indexable turning insert designed for demanding turning operations on materials that challenge cutting edges and chip control Tiger·tec Gold coating for edge stability Optimised chipformer 1E200N02-UF4 Specifically for stainless steels and superalloys Robust carbide grade WSM43G for long tool life Increased process reliability through optimised chip control The combination of the Tiger·tec Gold coating and the WSM43G carbide grade provides consistently controlled chip formation when machining stainless steels and heat‑resistant superalloys. The coated grade supports a stable cutting edge under high thermal stress, reducing the risk of built‑up edge and unexpected tool changeovers. When fitted with the matching chipformer 1E200N02‑UF4, the insert channels chips predictably, which lowers mechanical shock to the toolholder, improves surface finish and helps maintain cycle times in serial production. Geometry tuned to reduce machining risks and set‑up time The GX09‑1E200N02‑UF4 geometry, paired with the UF4 chipbreaker, is engineered to ease process set‑up: the insert shape supports reliable engagement angles and consistent chip evacuation even at higher feeds. This geometry mitigates radial and axial load spikes and allows more stable cutting parameters, which in turn reduces the need for conservative machining and increases usable metal removal rates. The result is fewer interruptions and a more predictable production flow for components made from tough materials. Consistent tool life and predictable results for production environments Walter Tools’ grade selection emphasises repeatable performance: WSM43G delivers a balance of toughness and wear resistance suitable for challenging alloys. In practice, this means longer intervals between tool changes and reduced scrap rates, translating into improved overall equipment effectiveness. The insert’s behaviour is especially beneficial for operations where consistent surface quality and dimensional stability are essential, such as aerospace or power‑generation components made from titanium and nickel‑based alloys. Practical selection and integration guidance for machining setups Choosing the right insert grade and chipbreaker is critical for efficient turning. The GX09‑1E200N02‑UF4 WSM43G insert is recommended where stable edge control and heat resistance are priorities; the 1E200N02‑UF4 chipformer is suited to turning strategies that favour continuous chip formation and secure evacuation. For integration into existing tooling systems, check compatibility with the chosen toolholder seat and clamping style; the insert’s defined geometry supports straightforward indexing and reproducible tool offsets across batches. For reliable heavy‑duty turning with proven edge stability, contact Metav Werkzeuge to discuss application‑specific parameters for Walter Tools inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to arrange expert advice and secure the optimal grade for the machining task. Technical data SKU: GX09-1E200N02-UF4-WSM43G-WALTER Designation: GX09-1E200N02-UF4 WSM43G Product type: Turning insert (indexable) Grade: WSM43G Series: Tiger·tec Gold Chipformer: 1E200N02-UF4 Material groups: S / M Core specifications ISO groups: M (stainless steels), S (superalloys / titanium) Suitable application: Heavy-duty turning and machining of difficult alloys Coating technology: Tiger·tec Gold Special features Carbide grade: WSM43G Chip control: Optimised for continuous chip formation Edge behaviour: High thermal and mechanical stability Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The GX09‑1E200N02‑UF4 WSM43G insert is specified for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), where chip control and edge resilience are required. How does the Tiger·tec Gold coating help performance? The Tiger·tec Gold coating increases thermal resistance and reduces friction at the cutting zone, supporting stable cutting edges and longer tool life when machining tough or heat‑sensitive materials. What is the role of the 1E200N02‑UF4 chipbreaker? The 1E200N02‑UF4 chipformer shapes and evacuates chips consistently, reducing the likelihood of tangling or build‑up and helping to maintain surface quality and tool life. Can this insert be used in existing tooling systems? Yes — the insert geometry is compatible with standard indexable turning toolholders. Verify the seat and clamping style of the holder to ensure correct fit and repeatable offsets. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX09-1E200N10-RF8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the high-temperature stability and edge security of the Tiger·tec Gold grade combined with proven chip control geometry to maintain steady production and reduced tooling costs; order directly via Metav Werkzeuge or consult the team for tailored cutting data. GX09-1E200N10-RF8 WSM23G indexable turning insert — Tiger·tec Gold, for rostfreier Stahl and superalloys | Walter Tools GX09-1E200N10-RF8 WSM23G is a coated indexable insert for heavy-duty turning of rostfreier Stahl and heat-resistant alloys, designed to provide consistent edge life and controlled chip formation in demanding machining tasks Tiger·tec Gold coating for heat resistance WSM23G coated carbide for stable cutting edges Designed for rostfreier Stahl and superalloys Secure chip control with 1E200N10-RF8 geometry Reliable edge life under thermal stress The combination of Tiger·tec Gold coating and the WSM23G carbide grade delivers a measurable advantage when machining materials that generate high cutting temperatures. The advanced coating technology improves thermal resistance and reduces flank wear, which translates into longer tool life and fewer index changes. For production planning this means increased uptime and more predictable tool consumption, supporting continuous operation and lower overall operating costs. Predictable chip behaviour and process stability The specified geometry 1E200N10-RF8 is engineered to promote consistent chip control during interrupted cuts and in workpieces with variable cross-sections. Controlled chip formation reduces the likelihood of rework and machine downtime and facilitates safer part handling. Clear chip evacuation also eases automation integration and diminishes the risk of surface damage, making the insert a practical choice for both manual and CNC turning applications. Practical benefits for purchasing and setup As a member of the Tiger·tec Gold family, this insert offers an attractive cost-benefit profile: fewer tool changes and stable cutting conditions reduce secondary operations and inspection cycles. The coated carbide construction supports reliable edge integrity in tough applications, helping to maintain machining tolerances and surface finish without constant intervention. For specific cutting parameters, Metav Werkzeuge provides application support and can supply recommended feeds and speeds to match machine and material combinations. Suitable for demanding materials and clear material guidance This grade is expressly designed for ISO groups M and S: M denotes rostfreie Stähle, which require secure chip formation and heat management, while S covers heat-resistant superalloys and titanium, which challenge the cutting edge due to poor thermal conductivity. The insert’s combination of coating and substrate balances wear resistance with edge toughness, enabling effective machining of both families with reduced risk of built-up edge or premature flank failure. Contact Metav Werkzeuge for tailored cutting data and procurement assistance for Walter Tools Tiger·tec Gold inserts Technical data Article number: GX09-1E200N10-RF8-WSM23G-WALTER Item designation: GX09-1E200N10-RF8 WSM23G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM23G Geometry / chipbreaker: 1E200N10-RF8 Material group suitability: S / M Facts ISO workpiece groups: M (rostfreie Stähle), S (superalloys and titanium) Coating type: coated carbide (Tiger·tec Gold) Product type: indexable turning insert Special features High thermal resistance for elevated cutting temperatures Stable cutting edge for repeatable results Effective chip control for safer machining Designed for heavy-duty turning of rostfreier Stahl and superalloys FAQ What materials is this insert suitable for? The GX09-1E200N10-RF8 WSM23G insert is suited for ISO groups M and S, specifically rostfreie Stähle and heat-resistant superalloys, where thermal stability and edge robustness are required. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating increases thermal resistance and wear protection, which yields longer tool life and more consistent edge performance during prolonged cutting operations. Can this insert be used for titanium alloys? Yes, the S classification indicates suitability for titanium and other heat-resistant alloys; the WSM23G grade is designed to handle the thermal and mechanical stresses typical of these materials. Where can cutting data for this insert be obtained? Cutting parameters and application guidance are available from Metav Werkzeuge; they provide tailored recommendations based on machine type and workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
GX09-1E225N01-UF8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating, a stable cutting edge and optimised chip control to maintain consistent cycle times and extend tool life; this combination supports productive machining of difficult-to-machine alloys and stainless steel. Order the GX09-1E225N01-UF8 WSM23G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. GX09-1E225N01-UF8 WSM23G indexable turning insert – Tiger·tec Gold, for stainless steel and superalloys | Walter Tools The GX09-1E225N01-UF8 WSM23G delivers heat-resistant performance for challenging turning operations and is designed as an indexable turning insert for heavy-duty applications Tiger·tec Gold coating for high heat resistance Stable cutting edge for productive machining Optimised chipbreaker 1E225N01-UF8 Suited for stainless steel and superalloys Consistent performance through heat-resistant coating and grade The Tiger·tec Gold coating combined with the WSM23G grade provides improved resistance to thermal loading, which translates into longer tool life and fewer tool changes per shift. In practice, this means a reduction in unexpected downtime and a more predictable production schedule when machining heat-sensitive or tough-to-cut materials. The coated carbide construction is tailored to support a stable cutting edge, reducing the tendency for built-up edge formation and helping to maintain dimensional accuracy over longer runs. Safer, more efficient turning thanks to optimised chip control A well-defined chipbreaker geometry such as 1E225N01-UF8 ensures reliable chip formation and evacuation, lowering the risk of chip entanglement and workpiece damage. Better chip control leads to improved surface finishes and fewer interruptions for manual chip handling. The insert’s combination of edge stability and chipbreaking capability contributes to productive machining, enabling higher feed rates or deeper cuts under the correct machining parameters without sacrificing component quality. Application focus and process benefits for workshops and production Designed for demanding materials, this insert is particularly suited to machining stainless steel and heat-resistant superalloys, where thermal stability and edge retention are critical. The grade’s properties support consistent cutting performance across varying batch sizes, offering a favourable cost-per-component balance in medium-to-high-volume production. For workshops seeking reproducible results, the indexable design simplifies tool inventory and changeover, supporting leaner operations and tighter process control. Contact Metav Werkzeuge for tailored recommendations on tooling selection or to discuss machining parameters for specific stainless steel grades and superalloys Technical data Article number: GX09-1E225N01-UF8-WSM23G-WALTER Item name: Indexable turning insert GX09-1E225N01-UF8 WSM23G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Grade: WSM23G Chipbreaker: 1E225N01-UF8 Material class: S / M Special features Coating: Tiger·tec Gold (coated carbide) Application: stainless steel and superalloys Stable cutting edge and optimised chip control FAQ What materials is this insert designed for? The GX09-1E225N01-UF8 WSM23G insert is intended for stainless steel and heat-resistant superalloys, offering thermal stability and edge retention for such materials. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold enhances heat resistance and wear performance, which helps the insert maintain a stable cutting edge and extends tool life during continuous turning operations. What role does the chipbreaker 1E225N01-UF8 play? The chipbreaker geometry ensures controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions in the machining process. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
GX09-1E239N12-RF8 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM23G grade for reliable machining of demanding alloys and rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for process recommendations. Turning indexable insert GX09-1E239N12-RF8 WSM23G – Tiger·tec Gold, for rostfreier Stahl & superalloys (Walter Tools) The GX09-1E239N12-RF8 WSM23G is a Tiger·tec Gold-coated turning insert designed for secure machining of rostfreier Stahl and heat-resistant superalloys. Tiger·tec Gold coating for higher wear resistance WSM23G grade for rostfreier Stahl and superalloys Stable cutting edge for extended tool life Optimised chip control with 1E239N12-RF8 geometry High-performance coating that extends tool life and stability The combination of the Tiger·tec Gold coating and the WSM23G grade provides enhanced thermal resistance and wear protection compared with standard uncoated carbide. The coated hardmetal substrate reduces flank wear and supports a stable cutting edge under the high temperatures and adhesion tendencies typical of rostfreier Stahl and superalloys. Coated carbide here means a thin, engineered multilayer deposited onto the substrate to improve hardness, lubricity and oxidation resistance, which in turn promotes longer service intervals and more reliable tool performance in batch and continuous production. Geometry and chip control that improve process efficiency The 1E239N12-RF8 chipbreaker geometry is tailored to secure chip formation when cutting tough materials, giving chip control that reduces recutting and machine downtime. A reliable chipformer helps to maintain a stable cutting edge, lowers the risk of workpiece surface damage and simplifies swarf management in automated cells. Optimised chip flow also supports consistent finish quality and allows for more aggressive feeds in many turning operations, contributing directly to higher productivity and lower per-part machining costs in series production. Process reliability for demanding applications and industries Designed for challenging turning tasks, this insert supports consistent machining of rostfreier Stahl and heat-resistant alloys used across aerospace, energy and high-end engineering. The engineered combination of grade and geometry promotes process reliability by resisting edge breakdown and enabling repeatable results from component to component. Walter Tools manufacturing standards and the Tiger·tec Gold technology help to secure consistent tool life and predictable performance, which is essential for planning tool-change intervals and maintaining production uptimes. Contact Metav Werkzeuge for tailored procurement and machining advice on Walter Tools Tiger·tec Gold turning inserts and to discuss suitable grades and geometries for specific rostfreier Stahl applications Technical data SKU: GX09-1E239N12-RF8-WSM23G-WALTER Article name: Drehwendeschneidplatte GX09-1E239N12-RF8 WSM23G Walter Tools Product type: Drehwendeschneidplatte Core data Grade: WSM23G Series: Tiger·tec Gold Chipbreaker: 1E239N12-RF8 Material designation: S / M Special features Coating: Tiger·tec Gold Suitable for: rostfreier Stahl, heat-resistant superalloys and titanium Brand: Walter Tools FAQ Is this insert suitable for machining rostfreier Stahl? The GX09-1E239N12-RF8 WSM23G insert is specifically engineered for rostfreier Stahl, offering a grade and coating combination that supports secure chip formation and reduced adhesion. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances thermal and wear resistance on the insert, which improves tool life and supports stable cutting edges when machining tough materials with Walter Tools inserts. Which materials beyond rostfreier Stahl can be machined with this insert? The WSM23G grade and geometry are suitable for heat-resistant superalloys and certain titanium applications, delivering consistent performance under high thermal load. How does the 1E239N12-RF8 geometry affect chip behaviour? The 1E239N12-RF8 chipbreaker promotes controlled chip formation and evacuation, reducing recutting and aiding surface finish consistency during turning operations. Where is this insert typically used within industry? Inserts of this type are commonly used in aerospace, power generation and specialised engineering where rostfreier Stahl and superalloys demand stable, long-running tool performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
GX09-1E250N02-GD3 WKP23G Wendeplatten - Walter Tools
Benefit from a proven combination of Tiger·tec Gold coating and the WKP23G carbide grade for robust, productive turning of steel and cast iron; this insert delivers stable chip formation and predictable service life. Order the insert directly via Metav Werkzeuge or consult our specialists for process-oriented advice. Drehwendeschneidplatte GX09-1E250N02-GD3 WKP23G – Turning indexable insert, Tiger·tec Gold for steel & cast iron, Walter Tools A Drehwendeschneidplatte GX09-1E250N02-GD3 WKP23G engineered for high-productivity turning of steel (P) and cast iron (K), utilising Walter Tools’ Tiger·tec Gold coating for enhanced wear resistance. Tiger·tec Gold coating for improved wear resistance WKP23G grade: coated carbide for diverse materials Optimised chipformer for consistent chip control Designed for steel and cast iron turning applications Increased tool life through advanced coating technology The insert combines the Tiger·tec Gold coating with a WKP23G carbide substrate to reduce abrasive wear and increase edge stability under typical turning loads. This coating technology is engineered to handle the heat and friction that arise when machining unalloyed and alloyed steels, so that the cutting edge maintains performance for longer intervals. The outcome is fewer tool changes, reduced machine downtime and a more consistent component finish throughout production runs. Predictable chip behaviour and process reliability Designed with an optimised chipformer, the geometry directs chip flow to avoid entanglement and to support stable cutting forces. For materials in the ISO groups P (steel) and K (cast iron), the grade and geometry are selected to cope with both the continuous chips of steels and the typically shorter, breaking chips of cast iron. The chip control reduces manual intervention, simplifies swarf management and contributes directly to reliable cycle times on lathes and turning centres. Practical benefits for workshop efficiency The insert’s construction as a coated carbide indexable geometry supports easy indexation and consistent reproducibility of cutting edges. Where predictability and repeatability matter, the combination of grade and coating results in steady tool life and surface quality, aiding downstream processes such as inspection and assembly. Specification-driven setups benefit from fewer process adjustments, and the insert’s compatibility with standard toolholders facilitates quick integration into existing tooling systems. Contact Metav Werkzeuge for application advice on the Walter Tools Tiger·tec Gold WKP23G insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: GX09-1E250N02-GD3-WKP23G-WALTER Label: Drehwendeschneidplatte GX09-1E250N02-GD3 WKP23G Walter Tools Grade: WKP23G Series: Tiger-tec Gold Insert designation: GX09-1E250N02-GD3 ISO designation: GX09-1E250N02-GD3 WKP23G Material group: P / K Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Material groups: P (steel), K (cast iron) Coating technology: Tiger·tec Gold Carbide type: coated carbide Geometry / chipbreaker: 1E250N02-GD3 Special features Optimised chipformer for stable chip control Broad applicability across steel and cast iron Consistent edge stability and wear resistance Suitable for indexable turning operations Productive machining with predictable tool life FAQ What materials is this insert suitable for? This insert is specified for machining steel (P) and cast iron (K) in accordance with the grade and geometry of the GX09-1E250N02-GD3 WKP23G turning insert by Walter Tools. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKP23G grade enhances wear resistance and edge stability, helping to extend tool life and maintain surface quality during turning. Is the insert compatible with standard toolholders? The GX09-1E250N02-GD3 geometry is designed for common indexable turning toolholders; holders should be checked for matching seating and clamping specifications before use. How does the chipformer affect machining performance? The optimised chipformer promotes predictable chip breakage and controlled evacuation, which reduces swarf-related interruptions and improves process reliability for both steel and cast iron. Can this insert be indexed to present a fresh cutting edge? Yes, as an indexable turning insert the design supports indexing to fresh edges, enabling reproducible cutting performance and straightforward edge management. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer. The Walter AG brand (Walter Tools) is recognised for precision tools and high-performance cutting solutions worldwide.
GX09-1E250N02-GD3 WSM33G WSM33G Wendeplatten - Walter Tools
High process security and stable chip formation make this insert a reliable choice for demanding turning tasks; its Tiger·tec Gold coating and WSM33G grade ensure robust edge stability when machining stainless steels and heat‑resistant superalloys. Order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. GX09-1E250N02-GD3 WSM33G indexable turning insert, Tiger·tec Gold coating — Walter Tools (for stainless steels and superalloys) GX09-1E250N02-GD3 WSM33G is an indexable turning insert engineered for secure machining of stainless steels and heat‑resistant superalloys, offering optimised chip control and enhanced cutting‑edge stability. Tiger·tec Gold coating for thermal stability WSM33G grade for stable cutting edge Optimised chip control for stainless steels Suitable for heat‑resistant superalloys Consistent machining of tough materials for predictable output The GX09-1E250N02-GD3 WSM33G insert combines a geometry tailored for reliable cutting with a grade that supports secure chip formation when working with demanding materials. The WSM33G grade is a coated cemented carbide designed specifically to counter the typical challenges of stainless steels and superalloys — namely work hardening, high temperatures and a tendency to form built‑up edge. By focusing on stable edge retention and controlled chip detachment, the insert contributes to consistent cycle times and reduced rework, which supports higher productivity in series production and critical one‑off components alike. Durable coating and grade reduce downtime and tool changes The Tiger·tec Gold coating provides thermal resistance and wear protection that extend the service life of the cutting edge under elevated cutting temperatures. Combined with the WSM33G carbide grade, the coating improves resistance to abrasive and adhesive wear modes typically encountered in high‑temperature alloys. The result is fewer interruptions for insert changes and more predictable tool performance across longer batches. This technical pairing secures process reliability and makes the insert a cost‑effective component in production environments that prioritise machine uptime and consistent surface quality. Clear material focus and machining advantages for process planners Designed for ISO material groups M and S, the insert is suited to stainless steels (M) and heat‑resistant superalloys and titanium (S). Group M materials often demand reliable chip control to avoid built‑up edge, while group S materials place high thermal and mechanical loads on the cutting edge; the WSM33G specification addresses both by balancing toughness and hot hardness. For process planners this means easier selection of an insert that mitigates common failure modes and supports repeatable results, particularly where surface finish and dimensional stability are critical. The insert’s consistent behaviour under varying loads helps reduce setup iterations and simplifies process documentation. For secure, high‑temperature machining with the WSM33G Tiger·tec Gold insert, contact Metav Werkzeuge for expert advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX09-1E250N02-GD3-WSM33G-WALTER Label: Drehwendeschneidplatte GX09-1E250N02-GD3 WSM33G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger‑tec Gold Grade: WSM33G ISO designation: GX09-1E250N02-GD3 WSM33G Facts Material group: S / M Suitable for stainless steels: yes Special features Tiger·tec Gold coating Coated cemented carbide grade Optimised chipbreaker: 1E250N02-GD3 Application focus: stainless steels and heat‑resistant superalloys Stable cutting edge and improved chip control FAQ What materials is this insert intended for? The GX09-1E250N02-GD3 WSM33G insert is intended primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S). How does the Tiger·tec Gold coating help in machining? The Tiger·tec Gold coating increases thermal resistance and wear protection, which enhances edge life and stability during demanding turning operations. Is WSM33G suitable for interrupted cuts or heavy feed applications? The WSM33G grade is designed for robust edge stability, making the insert well suited to applications where mechanical and thermal loads are high; selection should consider specific cutting conditions and machine rigidity. What does the chipbreaker designation mean for process planning? The chipbreaker 1E250N02‑GD3 is optimised to produce controlled chips in the intended material groups, aiding consistent evacuation and reducing the risk of chip entanglement in automated operations. Can this insert achieve consistent surface quality in serial production? Yes, the combination of WSM33G grade and Tiger·tec Gold coating delivers repeatable edge behaviour that supports consistent surface finishes across batches. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product from the respective manufacturer. Walter Tools is referenced as the product manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com