GX16-1E200N02-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM33S grade and proven chip control for a dependable turning process; ask Metav Werkzeuge for application advice or order directly through the dealer network. GX16-1E200N02-UF4 WSM33S – Indexable turning insert, Tiger·tec Silver (Walter Tools), for stainless steels and superalloys GX16-1E200N02-UF4 WSM33S is a coated carbide indexable insert designed for demanding turning operations on heat-resistant materials and stainless steels Tiger·tec Silver coated grade WSM33S Optimised for stainless steels and superalloys Stable cutting edge and reliable chip control Suitable for heavy-duty and heat-resistant machining Increased productivity through a thermally stable coating The combination of a Tiger·tec Silver coating and a WSM33S carbide substrate provides a measurable improvement in process stability and tool life. The coating reduces friction and supports heat resistance during extended cuts, which leads to fewer tool changes and higher machine uptime. This technical design promotes consistent dimensional accuracy and contributes to lower cycle times in production environments where thermal load and build-up of edge instability are common. Precise performance for stainless steels and superalloys Engineered for the ISO groups M and S, the insert is especially suited to machining stainless steels and superalloys (including titanium-based materials). The substrate and geometry balance toughness and wear resistance to counter the typical problems of these workpiece groups, such as built-up edge and poor heat dissipation. As a result, manufacturers benefit from reliable surface finish and repeatable component tolerances when processing demanding materials. Effective chip control and robust cutting edge for consistent results The integrated chipbreaker 1E200N02-UF4 promotes controlled chip formation and evacuation, reducing the risk of re-cutting or tool damage. Combined with the stable cutting edge design, the insert supports uninterrupted production runs and lowers the likelihood of unexpected downtime. The construct of the insert yields predictable wear behaviour, enabling planned tool-change intervals and improved overall equipment effectiveness for batch and continuous production. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger·tec Silver inserts or request specific machining parameters by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: GX16-1E200N02-UF4-WSM33S-WALTER Name: GX16-1E200N02-UF4 WSM33S Product type: Indexable turning insert (Drehwendeschneidplatte) Facts ISO material groups: M, S Material designation: S / M Series: Tiger·tec Silver Special features Coating: Tiger·tec Silver Grade: WSM33S Chipbreaker: 1E200N02-UF4 Brand: Walter Tools Application focus: stainless steels and heat-resistant superalloys FAQ What workpiece materials is this insert suitable for? The insert is suitable for stainless steels (ISO group M) and superalloys/titanium (ISO group S); the WSM33S grade and Tiger·tec Silver technology are selected for these material demands. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver reduces friction and improves thermal resistance, which extends tool life and stabilises cutting performance under high thermal loads when using the WSM33S grade. Which chipbreaker is integrated and what is its function? The chipbreaker designation is 1E200N02-UF4; it is designed to produce short, controllable chips and to support safe chip evacuation during heavy or heat-prone cutting operations. Is this insert suited for high-material-removal rates? Yes, the combination of coating, substrate and chip control makes it appropriate for demanding, heavy-duty turning where process reliability and edge stability are required. Can the insert deliver consistent surface finish on stainless steels? The insert’s geometry and WSM33S composition help to reduce built-up edge and maintain a consistent surface quality in stainless steel turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
GX16-1E200N02-UF4 WSM43S WSM43S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and the WSM43S grade for improved edge life and reliable chip formation when machining stainless steels and heat-resistant alloys; the insert supports stable, productive turning operations. Order the GX16-1E200N02-UF4 WSM43S directly via Metav Werkzeuge or ask the consultants for application guidance. GX16-1E200N02-UF4 WSM43S – Indexable turning insert by Walter Tools (Tiger·tec Silver, chipbreaker 1E200N02-UF4) The GX16-1E200N02-UF4 WSM43S is an indexable turning insert designed for demanding machining tasks on stainless steels and heat-resistant superalloys, combining coating technology and a dedicated chipbreaker for consistent performance Tiger·tec Silver coating for wear resistance WSM43S grade for stainless steels and superalloys 1E200N02-UF4 chipbreaker for stable chip control High edge stability for productive machining Longer tool life through advanced coating and grade selection The combination of the Tiger·tec Silver coating and the WSM43S carbide grade provides measurable improvements in wear resistance and edge retention. For components made from stainless steels or other heat‑resistant alloys, this results in fewer tool changes and longer productive cycles. The coating reduces friction at the cutting edge and helps to avoid built‑up edge formation, which in turn supports consistent dimensional accuracy and lower scrap rates during serial production. Predictable chip control for smoother cycle times Equipped with the 1E200N02-UF4 chipbreaker, this insert delivers regular chip shapes under a wide range of cutting conditions. Predictable chip formation reduces the risk of surface damage and machine interruptions, supporting uninterrupted turning operations and improved surface quality. Stable chips also simplify chip evacuation in both manual and automated setups, contributing to a more efficient process chain. Process stability and consistent surface finish The geometry and material pairing of the insert ensure edge stability during moderate to heavy cutting conditions. Consistent cutting-edge behaviour directly benefits surface finish and tolerance adherence, particularly important when machining components that require minimal rework. The design supports productive machining strategies while maintaining repeatable results across workpieces and batches. Application scope and selection tips Marked for ISO groups M and S, the insert is tailored to machine stainless steels (M) and heat‑resistant superalloys or titanium (S). Selection of the appropriate grade and chipbreaker combination enables adaptation to specific part geometries and cutting conditions. For detailed cutting data, toolholders and recommended feeds and speeds, consult the technical advisers to align insert choice with the selected turning strategy. For enhanced process reliability with Walter Tools inserts, contact Metav Werkzeuge for application-specific recommendations and to source the GX16-1E200N02-UF4 WSM43S for production use. Technical data SKU: GX16-1E200N02-UF4-WSM43S-WALTER Product: Indexable turning insert GX16-1E200N02-UF4 WSM43S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM43S Chipbreaker: 1E200N02-UF4 Applicable materials: M (stainless steels), S (heat‑resistant superalloys / titanium) Material type: coated cemented carbide Facts Designation: GX16-1E200N02-UF4 Coating/technology: Tiger·tec Silver Material groups: S / M Suitable for stainless steel: yes Special features Coated carbide grade optimised for difficult‑to‑machine materials Stable cutting edge and enhanced wear resistance Dedicated chipbreaker for secure chip control Suitable for machining of stainless steels and heat‑resistant alloys FAQ What materials is this insert suitable for? The GX16-1E200N02-UF4 WSM43S by Walter Tools is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat‑resistant superalloys or titanium. Which coating and grade are used on the insert? The insert uses the Tiger·tec Silver coating and the WSM43S coated carbide grade to improve wear resistance and cutting edge stability under demanding conditions. How does the 1E200N02-UF4 chipbreaker affect machining? The 1E200N02-UF4 chipbreaker promotes regular chip shapes and secure chip evacuation, which improves surface finish and reduces interruptions during turning operations with the GX16-1E200N02-UF4 WSM43S. Can this insert be used for high‑temperature alloys and stainless steel components in series production? Yes; the WSM43S grade and the Tiger·tec Silver technology are intended to provide stable performance and longer tool life when machining stainless steels and heat‑resistant alloys in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX16-1E200N02-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of a high-performance Tiger·tec Silver grade and the WSM23S coated carbide for reliable machining of stainless steels and heat-resistant superalloys; the combination ensures stable chip formation and a durable cutting edge. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. GX16-1E200N02-UF8 WSM23S — Walter Tools indexable turning insert (Tiger·tec Silver) for stainless steels and superalloys The GX16-1E200N02-UF8 WSM23S is an indexable turning insert engineered for secure chip control and edge stability when machining rostfreier Stahl and high-temperature alloys in demanding production environments. Tiger·tec Silver coating for heat resistance Stable cutting edge for demanding materials UF8 chipbreaker for reliable chip control Suitable for stainless steels (M) and superalloys (S) Consistent performance for demanding materials The Tiger·tec Silver coating and the WSM23S grade provide a balanced combination of thermal resistance and wear protection, making the insert particularly suited to machining stainless steels and superalloys. The coated carbide substrate reduces diffusion and oxidation at elevated temperatures, which in turn helps maintain a stable cutting edge and extend tool life. For production environments where consistent cycle times and repeatable surface finish are required, this insert supports process reliability and predictable regrinding intervals. Precision chip control that boosts productivity The UF8 chipbreaker geometry is designed to produce short, controllable chips across a range of feeds and depths of cut, improving swarf handling and machine uptime. Good chip control reduces the need for manual intervention at the machine and helps protect workpiece surfaces from damage. In practical terms, stable chips mean fewer interruptions, fewer polishing steps, and a more efficient workflow—benefits that translate directly into lower cost per part and higher overall productivity. Application suitability and process advantages This indexable insert is formulated for use in materials designated M (rostfreie Stähle) and S (superalloys, titanium) according to ISO 513 classifications. The WSM23S grade was developed to meet the challenges of tenacious, heat-sensitive alloys that tend to work-harden or build up on the cutting edge. As a result, the insert supports secure material removal and a predictable surface finish even under thermally demanding conditions. Use in stable setups and with appropriate cutting parameters will deliver the best combination of tool life and part quality. Practical benefits for the workshop Choosing this insert provides clear operational advantages: robust edge stability reduces downtime for insert changes, while the coated carbide construction supports higher cutting speeds than uncoated alternatives. The combination of grade and chipbreaker geometry also assists in minimising secondary operations caused by poor chip behaviour. For machinists and production engineers, this means a more reliable machining process and improved capacity to meet tight tolerances in serial production. Contact Metav Werkzeuge today to discuss the Walter Tools GX16-1E200N02-UF8 WSM23S insert, check stock availability or request tailored cutting data for specific rostfreier Stahl and superalloy applications Technical data Article number: GX16-1E200N02-UF8-WSM23S-WALTER Product: Indexable turning insert, GX16-1E200N02-UF8 WSM23S Series: Tiger·tec Silver Grade: WSM23S Chipbreaker: UF8 Facts Material designation: S / M Suitability: rostfreier_stahl (M) — true Special features Coated carbide (Tiger·tec Silver technology) Designed for stainless steels and heat-resistant superalloys Optimised UF8 chipformer for secure chip control Stable cutting edge for demanding machining tasks FAQ What materials is this insert suitable for? The GX16-1E200N02-UF8 WSM23S insert is intended primarily for rostfreie Stähle (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), offering thermal resistance and edge stability for these materials. How does the Tiger·tec Silver coating help in production? Tiger·tec Silver coating on the WSM23S grade reduces thermal wear and improves oxidation resistance, which helps preserve the cutting edge and maintain consistent performance in longer production runs. What is the function of the UF8 chipbreaker? The UF8 geometry produces short, controlled chips across common turning parameters, improving swarf management and reducing the risk of chip-related surface damage during machining. Can this insert be used for high-speed turning? The coated carbide composition and grade formulation support elevated cutting speeds compared with uncoated grades; optimal parameters depend on workpiece alloy, machine rigidity and tooling setup. Is the cutting edge resharpenable or indexable only? This is an indexable turning insert designed for indexing when the active edge is worn; check machine holder compatibility and clamping specifications before reuse. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only and do not imply any affiliation between Metav Werkzeuge and the identified manufacturers. There is no connection between our company and the manufacturers beyond offering original, factory-new products of the respective brand.
GX16-1E200N10-RD4 WKP23S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and the WKP23S grade for stable chip control and extended tool life; the insert is optimised for machining steel and cast iron to support consistent production. Order the original Walter Tools insert directly via Metav Werkzeuge or consult our specialists for application advice. GX16-1E200N10-RD4 WKP23S — Turning insert for steel and cast iron, Tiger‑tec Silver (Walter Tools) The GX16-1E200N10-RD4 WKP23S is a turning insert engineered for productive metalcutting operations, offering robust chip control and high wear resistance across steel and cast iron applications. Tiger‑tec Silver coating for longer tool life WKP23S grade for stable chip formation Optimised for steel and cast iron machining Precision geometry 1E200N10‑RD4 for reliable cutting High-efficiency machining through advanced coating and grade The combination of the Tiger‑tec Silver technology and the WKP23S carbide grade provides a measurable advantage when machining abrasive or heat‑sensitive workpieces. The advanced coating reduces flank wear and supports higher cutting speeds, while the grade chemistry is tuned for predictable chip control when turning both unalloyed and alloyed steel as well as cast iron. This leads to fewer tool changes, lower process variation and a better cycle time in serial production. Reliable geometry that improves process stability The insert’s defined geometry 1E200N10‑RD4 promotes consistent cutting behaviour and predictable chip breaking, which is essential for unattended or lights‑out machining. The indexable design ensures repeatable seating and reduces setup variation, contributing to overall plant efficiency. In practice, improved stability translates to more consistent surface finish and reduced scrap rates, so production planners can rely on steady output rather than intermittent rework. Practical benefits for workshop and production environments As a Walter Tools solution, this insert supports a broad range of turning tasks with minimal adjustment. The suitability for both steel and cast iron simplifies tool inventory and enables flexible job scheduling. The product’s focus on wear resistance and chip control helps to extend tool life and reduce costs per part while maintaining consistent quality. Technical support and application data are available to assist with grade selection and parameter optimisation for specific machines and setups. For tailored application support or to secure genuine Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and fast supply. Technical data SKU: GX16-1E200N10-RD4-WKP23S-WALTER Product: Turning insert GX16-1E200N10-RD4 WKP23S Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP23S Geometry: 1E200N10‑RD4 Suitable materials: P / K (steel / cast iron) Product type: Turning insert Core data No numerical core data provided Special features Coating technology: Tiger‑tec Silver Carbide grade: WKP23S (coated carbide) Chipbreaker / geometry: 1E200N10‑RD4 Application focus: Machining of steel and cast iron Indexable insert design for repeatable seating FAQ What materials can be machined with this insert? The insert is designed for machining steel (P) and cast iron (K); the WKP23S grade and Tiger‑tec Silver coating are optimised for these material groups. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating reduces abrasive wear and improves thermal resistance, which helps to increase tool life and allows for higher cutting speeds with consistent results. Is this a standard indexable insert geometry? The geometry 1E200N10‑RD4 is a defined chipbreaker and seating form that offers predictable chip control and reliable cutting performance in turning applications. Where can genuine Walter Tools inserts be sourced? Genuine Walter Tools inserts, including the GX16-1E200N10‑RD4 WKP23S, are available through Metav Werkzeuge and official distributors; specification and application assistance can be provided by our consultants. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
GX16-1E200N10-RD4 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM23S coated‑carbide grade and a chipbreaker designed for heavy materials to secure longer tool life and consistent process reliability. Order the GX16-1E200N10-RD4 WSM23S turning insert directly via Metav Werkzeuge or ask the Metav consultants for application advice. GX16-1E200N10-RD4 WSM23S — Indexable turning insert, Tiger‑tec Silver, Walter Tools The GX16-1E200N10-RD4 WSM23S is an indexable turning insert with Tiger‑tec Silver coating, engineered for machining stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S). Tiger·tec Silver coating for heat resistance and wear control Coated carbide grade WSM23S for tough materials Optimised chipbreaker 1E200N10‑RD4 for stable chips Reliable cutting edge and extended tool life Improved production stability when machining tough alloys The Tiger‑tec Silver series delivers enhanced heat resistance and controlled wear, which translates into fewer unscheduled tool changes and steadier cycle times. The combination of the WSM23S coated‑carbide grade and the specified chipbreaker supports stable chip formation when cutting workpiece materials that tend to work‑harden or generate high temperatures. This results in a more consistent surface finish and reduced risk of built‑up edge, so production quality and throughput benefit directly from the tool’s materials and design. Measurable efficiency gains and lowered process risk Using a grade and coating optimised for ISO groups M and S brings tangible efficiency advantages: improved tool life, fewer tool interventions and better repeatability across batches. The insert’s design supports process security under higher cutting temperatures and challenging cut conditions common with stainless steels and superalloys. For manufacturing planners this means reduced downtime and a clearer return on tooling investment over the life of the insert. What the designation and chipbreaker imply for applications The code GX16-1E200N10‑RD4 indicates the insert series and the integrated chipbreaker geometry (1E200N10‑RD4), which is tuned for robust chip control in tougher materials. The grade WSM23S denotes a coated carbide formulation within the Tiger‑tec Silver family, designed to withstand thermal stress and maintain a stable cutting edge. For buyers and engineers less familiar with tooling codes: the series name and chipbreaker identify the insert’s intended use—heavy or difficult‑to‑machine workpieces—so selection can be aligned with specific component materials and cutting strategies. Practical selection guidance for workshop fit‑up When replacing inserts or choosing tooling for new programmes, match the insert’s ISO material groups M and S to the actual workpiece material. The GX16‑1E200N10‑RD4 WSM23S insert is particularly suitable where stainless steels and superalloys/titanium are present in the production mix. For best results, combine the insert with appropriate grades of cutting parameters, coolant strategy and clamping stability. If uncertainty remains about the right geometry or toolholder pairing, technical consultation is recommended to ensure the tool’s performance meets production targets. Contact Metav Werkzeuge for tailored recommendations on integrating the Tiger‑tec Silver GX16-1E200N10-RD4 WSM23S turning insert into your machining processes; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and procurement guidance. Technical data SKU: GX16-1E200N10-RD4-WSM23S-WALTER Article designation: GX16-1E200N10-RD4 WSM23S Product type: Indexable turning insert Grade: WSM23S Series: Tiger‑tec Silver Material designation: S / M Chipbreaker: 1E200N10-RD4 Manufacturer: Walter Tools UID: GX16-1E200N10-RD4-WSM23S-WALTER Facts No specific numerical dimensions provided in the dataset No cutting parameter recommendations provided in the dataset Special features Coating: Tiger‑tec Silver Material: Coated carbide (WSM23S) Application areas: stainless steels (M), superalloys/titanium (S) Optimised chip control via the 1E200N10‑RD4 chipbreaker Suited to heavy or difficult‑to‑machine workpieces FAQ What materials can this insert machine reliably? The GX16-1E200N10-RD4 WSM23S insert is intended for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S); the WSM23S grade and Tiger‑tec Silver coating support stable cutting in these materials. Is the WSM23S grade suitable for continuous production runs? Yes, the WSM23S coated‑carbide grade is formulated for extended tool life and consistent performance in demanding applications, making it suitable for continuous production when combined with correct cutting parameters. What does the chipbreaker code 1E200N10‑RD4 indicate? The chipbreaker designation describes the insert’s geometry for chip control and stability; 1E200N10‑RD4 denotes a geometry optimised for reliable chip formation in tougher materials rather than fine‑finishing light alloys. Can this insert be used for finishing stainless steel components? The insert is optimised for robust, stable cutting in stainless steels and superalloys; finishing applications depend on the chosen insert geometry and cutting parameters, so selection should reflect the required surface finish and tolerance. Does the Tiger‑tec Silver coating improve heat resistance? Yes, the Tiger‑tec Silver coating improves thermal resistance and wear behaviour, reducing the tendency for built‑up edge and supporting longer cutting intervals under higher temperatures. How should tool selection change when switching from mild steel to superalloys? When moving from mild steel to superalloys (ISO group S), select grades like WSM23S with coatings designed for heat and edge stability and use chipbreakers optimised for the tougher material to maintain process reliability. Walter AG (brand: Walter Tools); headquartered in Tübingen, Germany. Walter Tools is part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
GX16-1E200N10-RD4 WSM33S WSM33S Wendeplatten - Walter Tools
High-performance machining of tough materials is achieved by the combination of the Tiger·tec Silver coating and the WSM33S grade, delivering stable chip formation and extended cutting-edge life for rostfreie Stähle and heat-resistant alloys; order directly via Metav Werkzeuge or ask the consultants for process-matching advice. GX16-1E200N10-RD4 WSM33S turning insert — Tiger·tec Silver for rostfreie Stähle / Superalloys | Walter Tools GX16-1E200N10-RD4 WSM33S is a turning insert designed for heavy-duty and high-temperature machining, optimised for rostfreie Stähle and ISO group S materials such as superalloys and titanium alloys. Tiger·tec Silver coating for thermal stability WSM33S coated carbide for reliable edge life Suited to rostfreie Stähle and Superalloys 1E200N10-RD4 geometry for improved chip control Outstanding performance for demanding materials The combination of the Tiger·tec Silver coating and the WSM33S coated carbide grade provides a balance of hardness and thermal resistance that supports continuous production in demanding turning operations. The design resists edge wear and reduces the risk of built-up edge when machining rostfreie Stähle, which tend to be tough and prone to work hardening. With GX16-1E200N10-RD4 WSM33S, process stability is prioritised through a chemistry and coating system engineered for heat management, resulting in longer tool life and fewer interventions in the production cycle. Improved process security through edge stability and chip control The 1E200N10-RD4 chipbreaker geometry is shaped to guide chips away from the cutting zone and maintain a consistent cutting force, which benefits surface finish and cycle time. Better chip control reduces downtime caused by manual clearing or unexpected tool damage, and supports higher feed rates where appropriate. For workshop planners and production engineers, this translates into more predictable tool intervals and a lower cost per component when machining high-temperature alloys or rostfreie Stähle under continuous loads. Material-oriented grade selection that reduces tool changes The grade WSM33S is tailored for ISO groups M and S — M for rostfreie Stähle and S for heat-resistant superalloys and titanium. These groups are characterised by poor thermal conductivity and high strength at cutting temperatures; the insert’s coating and substrate combination is chosen to handle those stresses. Choosing a grade matched to these material classes minimises the frequency of insert exchange and supports a higher overall throughput. For production planning, the outcome is fewer tool variants to stock and simpler process parameter setting for repeatable results. Contact Metav Werkzeuge for a tailored recommendation on Walter Tools GX16-1E200N10-RD4 WSM33S inserts — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: GX16-1E200N10-RD4-WSM33S-WALTER Label: Drehwendeschneidplatte GX16-1E200N10-RD4 WSM33S Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Facts Grade: WSM33S Geometry: 1E200N10-RD4 Material designation: S / M Applicable to rostfreier Stahl: yes Special features Coated carbide grade WSM33S Thermal-resistant Tiger·tec Silver coating Optimised chip control geometry Brand: Walter Tools FAQ What materials is this insert suited for? The GX16-1E200N10-RD4 WSM33S insert is specified for ISO groups M and S, meaning it is suited for rostfreie Stähle and heat-resistant superalloys including titanium grades. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WSM33S grade improves thermal resistance and wear performance, supporting longer cutting-edge life and greater process consistency when machining high-temperature materials. What benefit does the 1E200N10-RD4 geometry provide? The 1E200N10-RD4 chipbreaker geometry offers controlled chip formation and evacuation, which reduces interruptions and improves surface finish in continuous turning operations. Is this insert suitable for high-feed or high-speed turning? The design of the WSM33S grade with Tiger·tec Silver coating supports elevated cutting parameters in applications where heat resistance and edge stability are required, making it appropriate for aggressive turning strategies on suitable machines. Can the insert be used for stainless steel components in series production? Yes, the combination of grade and coating is optimised for rostfreie Stähle, providing stable cutting performance that benefits series production through predictable tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original factory-new product of the manufacturer Walter Tools.
GX16-1E200N10-RF8 WSM13S WSM13S Wendeplatten - Walter Tools
The combination of Tiger‑tec Silver coating and the WSM13S grade delivers high process reliability and long tool life for demanding turning tasks; its 1E200N10‑RF8 chipbreaker supports stable chip control in tough materials. Order the insert directly via Metav Werkzeuge or contact the consultants for selection support. Drehwendeschneidplatte GX16-1E200N10-RF8 WSM13S – turning insert for stainless and heat-resistant alloys | Walter Tools The GX16-1E200N10-RF8 WSM13S is a coated turning insert designed for heavy-duty machining of stainless steels and heat‑resistant superalloys, offering a balance of edge stability and chip control. Tiger‑tec Silver coated for high thermal resistance WSM13S grade for stability in tough materials 1E200N10‑RF8 chipbreaker for consistent chip control High productivity through heat‑resistant coating and stable edge The Tiger‑tec Silver coating, combined with a coated carbide substrate, reduces thermal load at the cutting edge and extends service intervals. This results in consistently reproducible cutting performance when machining stainless steels and high‑temperature alloys classified under ISO groups M and S. The insert’s geometry and coating technology support reliable chip formation, which reduces downtime caused by irregular chips and minimises secondary operations for chip cleaning. Reliable surface finish and repeatable process results Thanks to the robust grade and the specific chipbreaker, operators benefit from stable cutting forces and improved surface integrity on finished components. The insert is engineered to maintain a sharp and wear‑resistant cutting edge, which supports predictable tool life and repeatable part quality. These characteristics translate into fewer tool changes and a measurable increase in process efficiency for small to medium batch production in industrial turning applications. Clear suitability for demanding materials and explanation of ISO groups The technical design targets materials categorised as ISO M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium). For these groups, the combination of edge robustness and heat resistance is critical: the coated carbide minimises adhesion and flank wear while the chipbreaker geometry promotes short, controllable chips. For workshops handling exotic alloys or corrosion‑resistant grades, this insert offers a dependable option to improve throughput without sacrificing surface quality. For precise tool selection and supply, contact Metav Werkzeuge for tailored advice and ordering assistance; the Walter Tools Tiger‑tec Silver inserts are available through Metav Werkzeuge and can be specified to match the machining task. Technical Data Article number: GX16-1E200N10-RF8-WSM13S-WALTER Designation: GX16-1E200N10-RF8 WSM13S Manufacturer: Walter Tools Facts Series: Tiger‑tec Silver Grade: WSM13S Chipbreaker: 1E200N10‑RF8 Special features Coated carbide material Suitable for ISO groups M and S Optimised for stable chip control Designed for demanding turning of stainless steels and superalloys FAQ What materials is this insert suitable for? The GX16-1E200N10-RF8 WSM13S insert is intended for stainless steels and heat‑resistant superalloys (ISO groups M and S), where thermal resistance and edge stability are required. How does the Tiger‑tec Silver coating help in machining? The Tiger‑tec Silver coating on the WSM13S grade reduces thermal impact at the cutting zone and enhances wear resistance, improving tool life and process reliability during continuous turning operations. What is the role of the 1E200N10‑RF8 chipbreaker? The 1E200N10‑RF8 chipbreaker promotes controlled, short chips and consistent chip evacuation, which contributes to safer machining and more stable surface finishes with the Walter Tools insert. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX16-1E200N10-RF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM23S grade for reliable performance when machining difficult-to-cut alloys; the insert provides stable chip formation and extended edge life, supporting continuous production. Order directly via Metav Werkzeuge or consult the technical team for process-matched recommendations. GX16-1E200N10-RF8 WSM23S turning indexable insert — Walter Tools, Tiger·tec Silver coated carbide, suited for S and M alloys GX16-1E200N10-RF8 WSM23S is an indexable insert designed for turning operations in demanding materials, offering robust edge stability and optimised chip control for heavy-duty and precision machining. Tiger·tec Silver coating technology WSM23S coated carbide grade Reliable chip formation and edge stability Suitable for rostfreier Stahl and superalloys High process reliability through advanced coating The Tiger·tec Silver coating on this indexable insert is engineered to resist thermal and mechanical wear, which directly improves tool life and reduces unplanned tool changes. For shops processing rostfreier Stahl and heat-resistant superalloys, the coating supports stable chip formation and lower susceptibility to built-up edge, leading to more consistent cycle times. The result is a measurable increase in productivity and less time spent on rework. Grade WSM23S: optimised for hard-to-machine materials The WSM23S grade is a coated carbide formulation tailored to maintain a strong cutting edge under severe conditions. Its composition favours heat resistance and flank wear control when machining alloys that tend to strain conventional grades. This translates into fewer tool indexings and a steadier surface finish on critical workpieces, particularly where material properties demand a stable cutting edge. Predictable chip control and process stability The geometry identified as GX16-1E200N10-RF8 combines edge form and chip-breaker design to channel chips reliably away from the cut. In practical terms, this means reduced risk of entanglement and shorter cycle interruptions during long turning runs. Where throughput and machine uptime are priorities, the insert’s optimised chip control reduces downstream handling and enhances operator safety. Application focus: rostfreier Stahl and superalloys Designed for the ISO groups M and S, the insert performs well on rostfreier Stahl (stainless-style alloys) and on heat-resistant superalloys and titanium that challenge heat dissipation. The combination of substrate and coating addresses the common machining issues of these groups—poor thermal conductivity and aggressive edge loading—by providing a balance between toughness and wear resistance. Benefits for production environments Integrating this insert into a turning cell supports longer uninterrupted production runs and improves repeatability from batch to batch. The reduced frequency of tool changes contributes to lower setup overhead and greater overall equipment effectiveness. For manufacturers pursuing consistent component quality under tight tolerances, the insert helps secure dependable dimensional results. Expert support and compatibility advice For process adaptation—choice of cutting data, coolant strategy or holder compatibility—technical consultation is recommended to extract the full advantage of the Tiger·tec Silver technology. The insert is intended for use with standard turning toolholders and compatible systems; final selection depends on the part geometry and machine capabilities. For tailored advice on integrating Walter Tools Tiger·tec Silver inserts into a specific turning process, contact Metav Werkzeuge for application support and availability. Technical Data Article number / SKU: GX16-1E200N10-RF8-WSM23S-WALTER Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM23S ISO designation: GX16-1E200N10-RF8 WSM23S Numbers / Core technical data Applicable material groups: M (rostfreier Stahl), S (superalloys and titanium) Geometry code: 1E200N10-RF8 UID: GX16-1E200N10-RF8-WSM23S-WALTER Special features / Versions Coated carbide grade WSM23S Tiger·tec Silver coating technology Designed for hard-to-machine materials Optimised chip breaker for stable chip evacuation Indexable insert for turning operations FAQ What materials is this insert designed for? The GX16-1E200N10-RF8 WSM23S insert is designed primarily for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), where the Tiger·tec Silver coating supports edge stability. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver, applied to the WSM23S grade, enhances thermal resistance and wear behaviour; this improves process reliability and extends the time between indexings when machining demanding alloys. Is special clamping required for this insert geometry? No specialised clamping is required beyond matching the insert geometry to a compatible turning holder; the insert is intended for standard turning toolholders that accept the GX16-series geometry. Can this insert be used for finishing as well as roughing? Depending on the chosen cutting data and holder rigidity, the insert can perform both roughing and semi-finishing tasks, delivering consistent edge life and good surface integrity on difficult-to-cut materials. Does WSM23S handle high cutting speeds? WSM23S combined with Tiger·tec Silver supports elevated cutting parameters in suitable setups; however, cutting speed selection should consider machine rigidity and coolant strategy for optimal results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation with the manufacturers. The offered item is original and factory-new from Walter Tools.
GX16-1E200R15-CF5 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Silver heat resistance, the WSM33S coated-carbide grade and the proven chipbreaker geometry for reliable turning of demanding materials; order this insert directly via Metav Werkzeuge or contact our consultants for tailored application support. GX16-1E200R15-CF5 WSM33S indexable turning insert — Walter Tools, optimised for rostfreier Stahl and superalloys The GX16-1E200R15-CF5 WSM33S is an indexable turning insert designed for productive machining of rostfreier Stahl and heat-resistant alloys, offering a combination of thermal stability and edge robustness ideal for demanding turning operations. Tiger-tec Silver coating for heat resistance Coated carbide grade WSM33S for long tool life Optimised chipbreaker 1E200R15-CF5 for stable chips Designed for rostfreier Stahl and superalloys High-temperature performance that keeps cycles running The Tiger-tec Silver coating on this coated carbide insert significantly improves thermal resistance and reduces adhesion when machining difficult materials. This results in a more stable cutting process when turning rostfreier Stahl or nickel-base alloys, where heat build-up and workpiece adhesion typically shorten tool life. The alloy-adapted combination of coating and substrate promotes a consistent thermal barrier at the cutting edge, so the machining cycle time remains predictable and productivity improves. The design therefore supports a measurable reduction in unscheduled tool changes and stabilises component tolerances. Reliable chip control for reproducible surface quality The 1E200R15-CF5 chipbreaker geometry is engineered for controlled chip formation and evacuation during interrupted or continuous cuts. Controlled chip formation lowers the risk of built-up edge and reduces secondary reworking, delivering a consistent surface finish and fewer scrap parts. For process engineers, the clear cause-and-effect is important: optimised chip control reduces machine downtime and improves first-time-right rates, particularly in shoulders, grooving entries and heavy feed passes. Long tool life brings economical production Using the WSM33S grade gives a balance between wear resistance and edge toughness, supporting longer tool life under thermally and mechanically demanding conditions. The coated substrate resists notch wear and flank deterioration, which translates into fewer indexings per workpiece and lower tooling consumption over time. For production environments handling small-batch to high-volume turning of heat-resistant materials, this economy supports predictable tooling budgets and reduces intervention frequency on the shop floor. Practical compatibility and selection advice The insert is suited primarily for machining rostfreier Stahl (ISO group M) and heat-resistant superalloys and titanium alloys (ISO group S), where thermal stability and edge robustness are decisive. When integrating the insert into existing toolholders, verify seat compatibility and recommended cutting parameters for the chosen grade and geometry; the combination of Tiger-tec Silver and the WSM33S substrate often allows moderately increased cutting speeds compared with uncoated grades while maintaining edge security. Application-focused trials are recommended to fine-tune feeds and speeds for the specific alloy and operation. For process-critical turning of rostfreier Stahl and superalloys, request application advice for Walter Tools Tiger-tec Silver inserts from Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: GX16-1E200R15-CF5-WSM33S-WALTER Designation: GX16-1E200R15-CF5 WSM33S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core data Grade: WSM33S Series: Tiger-tec Silver Chipbreaker / geometry: 1E200R15-CF5 Material designation: S / M Suitable for rostfreier Stahl: yes Features Coating: Tiger-tec Silver Substrate: coated carbide Application focus: rostfreier Stahl and heat-resistant alloys / titanium Benefit: stable chip formation and cutting-edge robustness FAQ Which materials is this insert recommended for? The insert is recommended for machining rostfreier Stahl (ISO group M) and heat-resistant superalloys and titanium (ISO group S); the WSM33S grade emphasises thermal resistance and edge stability for these materials. What advantages does the Tiger-tec Silver coating provide? The Tiger-tec Silver coating reduces heat-related wear and adhesion on the cutting edge, improving tool life and process stability when machining demanding alloys with high thermal loads. How does the 1E200R15-CF5 chipbreaker affect machining results? The 1E200R15-CF5 chipbreaker promotes consistent chip control and evacuation, reducing built-up edge and supporting better surface finish and fewer interruptions during turning. Is the insert suitable for roughing and finishing operations? Yes; the combination of WSM33S substrate and coating allows the insert to be used across a range of cutting conditions, from heavy roughing passes to finishing, depending on the selected cutting data. How should the insert be integrated into an existing tooling system? Check seat compatibility with the intended toolholder and refer to recommended cutting parameters for WSM33S; trial cuts are advised to determine optimal feeds and speeds for each alloy and operation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
GX16-1E200R15-CF6 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating technology and a purpose‑built chipbreaker geometry for stable cutting in stainless and heat‑resistant alloys; secure shorter cycle times and predictable tool life by ordering through Metav Werkzeuge or contacting our consultants for tailored cutting data. GX16-1E200R15-CF6 WSM33S indexable turning insert — Tiger‑tec Silver for stainless steel and superalloys | Walter Tools GX16-1E200R15-CF6 WSM33S is an indexable turning insert engineered for demanding turning of rostfreier Stahl and heat‑resistant superalloys Tiger-tec Silver coated carbide grade WSM33S Optimised for stainless steel (M) and superalloys (S) Stable cutting edge for demanding turning operations Reliable chip control with 1E200R15-CF6 geometry Improved process stability for tough materials The Tiger‑tec Silver coating combined with the WSM33S grade is developed to resist the highest thermal loads typical of rostfreier Stahl and nickel‑based superalloys. This combination promotes stable chip formation and reduces built‑up edge, which directly contributes to more predictable tool life and fewer interruptions on the shop floor. For operations where heat generation and material ductility challenge performance, the coated carbide substrate maintains edge integrity and reduces the frequency of insert changes, supporting continuous production. Consistent surface quality through geometry and chip control The 1E200R15-CF6 chipbreaker geometry is designed to evacuate chips effectively while maintaining a robust cutting edge. That results in a consistent surface finish and lower risk of part rework. The geometry supports a controlled shear plane, which helps when turning materials prone to long, stringy chips or when machining at elevated temperatures. For process engineers, this means fewer surprises in process stability and improved repeatability across multiple workpieces. Productivity gains and practical application advice Selecting this insert yields a balance between productivity and tool life in applications involving rostfreier Stahl and high‑temperature alloys. The insert’s coating and grade are tuned for heat resistance and wear performance, offering a favourable cost‑per‑component profile in medium to high‑volume turning tasks. For best results, pair the insert with appropriate cutting parameters and coolant strategy for the target material group; this approach optimises material removal rates while preserving the cutting edge and minimising cycle time. Contact Metav Werkzeuge for tailored cutting data and application support on Walter Tools Tiger‑tec Silver inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and delivery options Technical data Article number: GX16-1E200R15-CF6-WSM33S-WALTER Designation: GX16-1E200R15-CF6 WSM33S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM33S Geometry / chipbreaker: 1E200R15-CF6 Product type: Drehwendeschneidplatte Core data Material groups: S / M Suitable for rostfreier_stahl_material_anwendung: Yes Design and features Coated carbide grade WSM33S Tiger‑tec Silver coating technology Chipbreaker 1E200R15‑CF6 for reliable chip control Intended for rostfreier Stahl and heat‑resistant superalloys FAQ What materials is this insert suitable for? The GX16-1E200R15-CF6 WSM33S insert from Walter Tools is designed primarily for rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), offering stable cutting in these demanding materials. How does the Tiger‑tec Silver coating help in machining? Tiger‑tec Silver on the WSM33S grade improves heat resistance and wear performance, allowing the insert to maintain a stable cutting edge and more consistent tool life in high thermal loads. What is the role of the 1E200R15‑CF6 chipbreaker? The 1E200R15‑CF6 geometry promotes controlled chip formation and evacuation, which enhances surface finish consistency and reduces the likelihood of built‑up edge during turning operations. Can this insert improve cycle times in production? Yes; by combining a wear‑resistant coating with a robust geometry, the insert supports continuous cutting with fewer changes, contributing to improved productivity and reduced downtime. Is the insert suitable for finishing and semi‑finishing tasks? The coated carbide grade and chipbreaker design make it appropriate for both semi‑finishing and finishing applications in rostfreier Stahl and select superalloys, depending on machine stability and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new merchandise from the manufacturer Walter Tools.
GX16-1E200R7-CF5 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM33S cutting grade and the optimised chipformer for secure machining of demanding materials; order directly via Metav Werkzeuge or contact the consultants for application-specific recommendations. GX16-1E200R7-CF5 WSM33S indexable turning insert — Tiger·tec Silver for rostfreier Stahl and superalloys | Walter Tools The GX16-1E200R7-CF5 WSM33S is an indexable turning insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering thermal stability and reliable chip control. Tiger·tec Silver coating for high thermal resistance Optimised chipformer 1E200R7-CF5 for stable chips Coated carbide grade WSM33S for tough materials Suitable for rostfreier Stahl and Titan alloys Thermal stability that protects the cutting edge and cycle times The Tiger·tec Silver technology combines a robust coating system with a high-performance substrate to resist the thermal loads typical when machining rostfreier Stahl and nickel-based alloys. This results in stable cutting edges and reduced risk of built-up edge, which in turn maintains geometric accuracy over longer tool life. For production environments where consistent component quality and fewer tool changes increase throughput, the thermal resilience of this insert translates directly into saved machine time and predictable process windows. Reliable chip control for uninterrupted machining The integrated chipformer 1E200R7-CF5 is engineered to generate controlled, short-to-medium chips on demanding materials. This optimised geometry reduces the risk of chip entanglement and improves process security during continuous operations. Combined with the WSM33S coating grade, the insert supports a repeatable chip breakage pattern, simplifying chip management and lowering the likelihood of secondary damage to workpieces or fixtures — a clear benefit in precision turning and unmanned shifts. Productivity gains through material-specific design Selecting a grade built for M and S groups (rostfreier Stahl and superalloys/Titan) means machining parameters can be pushed further without sacrificing surface finish or tool life. The coated carbide composition provides wear resistance while maintaining a robust cutting edge, enabling higher metal removal rates on hard-to-cut alloys. For job shops and production lines alike, this combination improves the cost-efficiency per component and reduces idle times caused by frequent insert changes. Practical compatibility and application guidance The insert is intended for use where rostfreier Stahl and heat-resistant superalloys are encountered; suitability for other material families should be verified against machining parameters. As a geometrically defined indexable insert, it fits toolholders matching the GX16 specification and the listed chipformer code. When integrating this insert into existing tool setups, attention to secure clamping and correct axial/radial engagement helps to fully exploit the WSM33S grade’s strengths and to achieve consistent surface quality on turned components. Contact Metav Werkzeuge for application-specific advice on the Tiger·tec Silver WSM33S insert — Metav Werkzeuge can advise on toolholder compatibility, cutting data and availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX16-1E200R7-CF5-WSM33S-WALTER Designation: GX16-1E200R7-CF5 WSM33S Series: Tiger·tec Silver Grade: WSM33S Chipformer: 1E200R7-CF5 Type: indexable turning insert Manufacturer: Walter Tools Facts Applicable ISO groups: M, S Material group code: S / M Suitable for: rostfreier Stahl (flag true) Special features Coated carbide grade Optimised chipformer for controlled chips Designed for rostfreier Stahl and superalloys Stable cutting edge and thermal resistance FAQ What materials is this insert designed for? The GX16-1E200R7-CF5 WSM33S indexable turning insert is designed primarily for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S) and performs well where temperature resistance and edge stability are required. Which geometry and chip control does the insert offer? The insert features the 1E200R7-CF5 chipformer geometry, delivering optimised chip formation and stable breakage suitable for continuous turning operations with the WSM33S grade. Is the insert suitable for high-speed turning? Due to the Tiger·tec Silver coating and the WSM33S grade’s thermal resistance, the insert supports elevated cutting parameters compared with general-purpose grades, provided cutting data are adapted to the workpiece and toolholder setup. How should the insert be clamped and mounted? The GX16 index designation requires a matching toolholder that secures the insert in the specified pocket; correct clamping and axial/radial engagement are essential to exploit the insert’s stability and chip control. Can this insert be used for finishing operations on rostfreier Stahl? Yes — when set up with appropriate feeds and speeds the insert delivers repeatable surface quality, benefiting from the coating’s wear resistance and edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and tradenames remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation or sponsorship between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
GX16-1E225N01-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and WSM23S grade for stable cutting edges and consistent chip control, combining durability with high productivity; order directly via Metav Werkzeuge or consult the team for application support. GX16-1E225N01-UF8 WSM23S – indexable turning insert, Tiger‑tec Silver, for stainless steels and superalloys | Walter Tools The GX16-1E225N01-UF8 WSM23S is an indexable turning insert engineered for heavy-duty machining of rostfreier Stahl and heat‑resistant superalloys, offering robust edge stability and secure chip control in demanding applications Tiger‑tec Silver coating for extended tool life WSM23S grade for tough materials Stable cutting edge for process security Optimised chip control for consistent results Consistent process security for demanding materials The insert delivers a clear productivity advantage through its combination of Tiger‑tec Silver coating and the WSM23S carbide grade. These technical choices reduce flank wear and support a stable cutting edge, which is particularly important when machining rostfreier Stahl and heat‑resistant alloys that tend to produce long, adherent chips and generate high temperatures. The result is fewer interruptions for tool changes and a more predictable cycle time, which translates into measurable gains in shop-floor efficiency and part repeatability. Coating and grade explained: why it matters for tool life The Tiger‑tec Silver layer provides thermal resistance and improved wear behaviour compared with conventional coatings, while the WSM23S composition is tailored for tough, heat‑resistant workpiece materials. Together these features help to maintain edge integrity under elevated cutting temperatures, enabling higher cutting speeds where the component tolerance and tool-holder rigidity permit. For workshop planners and process engineers, this means a reliable compromise between cutting performance and tool longevity, reducing tooling costs per part in many applications. Practical application: integration into turning operations The geometry designation and chipbreaker (GX16‑1E225N01‑UF8) supports controlled chip formation in interrupted and continuous cuts, helping to prevent built‑up edge and to ease chip evacuation in confined tool‑holder arrangements. As an indexable turning insert, it fits standard holders compatible with its designation and is suited for a range of turning tasks from roughing to semi‑finishing when paired with appropriate feeds and depths of cut. The insert’s properties favour operations where secure chip control and consistent surface quality are priorities. Contact Metav Werkzeuge today for tailored recommendations on tool holders, cutting data and availability; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: GX16-1E225N01-UF8-WSM23S-WALTER Designation: GX16-1E225N01-UF8 WSM23S Series: Tiger‑tec Silver Manufacturer: Walter Tools Facts ISO material groups: M, S Grade: WSM23S Chipbreaker: 1E225N01-UF8 Special features Coating: Tiger‑tec Silver Material suitability: rostfreier Stahl, heat‑resistant superalloys and titanium alloys Product type: indexable turning insert FAQ What materials is this insert suitable for? The GX16-1E225N01-UF8 WSM23S insert is designed primarily for rostfreier Stahl (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering stable edge life in these challenging materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating enhances thermal resistance and wear behaviour, enabling the insert to maintain cutting-edge stability and support higher cutting parameters in demanding turning operations. Is this insert compatible with common tool holders? The insert follows a standard designation for indexable turning inserts; compatibility depends on the specific holder type, clamping style and seat geometry — process planners should confirm holder matching prior to use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise of the manufacturer.
GX16-1E239N02-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM33S grade to achieve secure chip formation and a stable cutting edge when machining stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or contact our advisors for application guidance. GX16-1E239N02-UF4 WSM33S indexable turning insert by Walter Tools — Tiger·tec Silver coating for stainless steels and superalloys A GX16-1E239N02-UF4 WSM33S indexable insert designed for heavy‑duty turning of stainless steels and heat‑resistant superalloys, offering thermal resilience and reliable chip control. Tiger·tec Silver coating for thermal resistance Coated carbide grade WSM33S for tough alloys Geometry 1E239N02‑UF4 for stable chip control Suitable for stainless steels and superalloys Consistent performance for demanding materials The WSM33S grade, integrated in the Tiger·tec Silver series, is a coated carbide solution developed for materials that challenge tool life. Designed specifically for stainless steels and heat‑resistant superalloys, the insert supports stable chip formation even under high temperatures and adhesion‑prone cutting conditions. The coating enhances heat resistance and reduces built‑up edge, which translates into fewer interruptions for tool changes and more predictable component quality. For operations where thermal loads and material toughness determine cycle time, this insert provides a balance between wear resistance and edge stability. Coating and geometry delivering reliable chip control The combination of a modern coating technology and a purpose‑designed chipbreaker improves machining outcomes. The geometry 1E239N02‑UF4 promotes consistent chip evacuation and controlled fragment size, lowering the risk of surface damage and machine downtime. In practice, this means fewer interruptions caused by tangled or serrated chips and more consistent surface finishes. The coated carbide substrate together with the engineered chipformer enables reproducible results in serial production as well as in single‑piece machining where process security is critical. Practical advantages for workshop efficiency Using this insert supports measurable shop‑floor benefits: longer tool life, reduced rework, and a more stable process window when cutting difficult alloys. The insert’s properties contribute to improved productivity by allowing slightly more aggressive cutting parameters without sacrificing surface integrity. For engineers and supervisors, the clearer process limits and the predictable wear behaviour reduce setup iterations and make planning for inserts and index changes more straightforward, which helps to shorten lead times and stabilise throughput. Guidance for selection and application When selecting an insert, match the WSM33S grade and 1E239N02‑UF4 geometry to the workpiece material and the intended task. For stainless steels that tend to work‑harden, conservative entry feeds combined with the insert’s thermal resistance will prevent rapid wear. For superalloys and titanium, prioritise secure clamping and appropriate cutting fluids to complement the insert’s heat‑resistant coating. If specifics of the component geometry or machine dynamics are unclear, technical consultation is recommended to fine‑tune parameters and extend tool life. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to specify the GX16‑1E239N02‑UF4 WSM33S for precise applications Technical data Article number: GX16-1E239N02-UF4-WSM33S-WALTER Label: Drehwendeschneidplatte GX16-1E239N02-UF4 WSM33S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM33S Chipbreaker / geometry: 1E239N02-UF4 Material designation: S / M Facts ISO groups: S (superalloys, titanium), M (stainless steels) Coating type: coated carbide Application: turning of stainless steels and heat‑resistant superalloys Special features Enhanced thermal resistance Stable cutting edge and secure chip formation Engineered chip control for reduced downtime Designed for productive machining of challenging materials FAQ What materials is this insert suitable for? The GX16-1E239N02-UF4 WSM33S insert by Walter Tools is suitable for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S). How does the Tiger·tec Silver coating help in machining? The Tiger·tec Silver coating on the WSM33S grade improves heat resistance and reduces adhesion at the cutting edge, which enhances tool life and maintains surface quality during extended turning operations. What is the purpose of the 1E239N02‑UF4 geometry? The 1E239N02‑UF4 chipbreaker geometry is designed to provide stable chip control, producing manageable chip forms and reducing the likelihood of chip entanglement or surface damage. Can this insert be used for high‑temperature cutting of superalloys? Yes, the WSM33S grade within the Tiger·tec Silver series is engineered for heavy machining of superalloys and materials that generate high thermal loads, offering improved process reliability. How should cutting parameters be adjusted for stainless steels? For stainless steels, combining the insert’s thermal resistance with moderate entry feeds and appropriate cutting fluid use helps to avoid work hardening and to extend tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX16-1E239N12-RD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM33S grade for long tool life and secure chip control; this insert is ideal for machining stainless steel and heat‑resistant superalloys. Order the insert directly via Metav Werkzeuge or consult the team for tailored application advice. GX16-1E239N12-RD4 WSM33S indexable turning insert — Tiger‑tec Silver, Walter Tools A robust GX16-1E239N12-RD4 WSM33S indexable turning insert designed for precision turning of stainless steel and high‑temperature alloys Tiger‑tec Silver coating for edge stability WSM33S grade for stainless steel and superalloys 1E239N12‑RD4 chipbreaker for reliable chip control Long tool life with high wear resistance Achieve higher productivity on difficult‑to‑cut materials The combination of the WSM33S cutting grade and the Tiger‑tec Silver coating delivers a measurable productivity advantage when working with demanding materials. The coated carbide substrate is engineered to resist thermal degradation and maintain a stable cutting edge, which reduces the frequency of index changes and supports longer uninterrupted cycles. For production environments machining stainless steel or nickel‑based alloys, this results in more consistent part quality and lower per‑component machining time. Controlled chip formation for safer, faster turning The 1E239N12‑RD4 chipbreaker geometry is optimised to produce predictable chips across a range of feeds and depths of cut. Predictable chip flow improves process stability, lowers the risk of workpiece damage and simplifies chip evacuation in automated cells. Technically, the chipformer balances shear plane control with edge strength so that the cutting process stays effective even under increased thermal loads typical of superalloys and titanium‑rich components. Minimise downtime with durable edge performance The insert’s design prioritises edge robustness and wear resistance, which translates into fewer tool changes and reduced machine downtime. The WSM33S grade emphasises heat resistance and stable wear behaviour, supporting longer zone‑consistent cutting before reindexing is required. In applications where repeatability and surface finish matter, the result is fewer interventions and a predictable maintenance schedule that supports planned productivity improvements. Clear application guidance and material compatibility This indexable insert is suitable for workpiece groups S and M according to ISO classification: M denotes stainless steels that tend to be tough and prone to built‑up edge; S denotes heat‑resistant superalloys and titanium, which impose high thermal and mechanical stress on the cutting edge. The insert is therefore recommended where thermal stability and secure chip control are priorities. If further machining data or cutting parameters are required for specific alloys, Metav Werkzeuge provides technical support by e‑mail or phone; detailed guidance ensures the right grade and geometry are selected for each process. Contact Metav Werkzeuge to discuss the Walter Tools Tiger‑tec Silver grade and find the optimal turning strategy for stainless steel and superalloys. Technical data Article number: GX16-1E239N12-RD4-WSM33S-WALTER Type: Indexable turning insert (Drehwendeschneidplatte) Grade: WSM33S Series: Tiger‑tec Silver Chipbreaker: 1E239N12-RD4 Manufacturer: Walter Tools Facts Workpiece groups: S / M Suitable for stainless steel: Yes SKU / UID: GX16-1E239N12-RD4-WSM33S-WALTER Special features Coating technology: Tiger‑tec Silver Optimised for heat‑resistant superalloys and titanium Stable cutting edge and controlled chip formation High wear resistance for extended tool life FAQ What materials is this insert best suited for? The GX16-1E239N12-RD4 WSM33S insert is optimised for stainless steel and heat‑resistant superalloys (ISO groups M and S), delivering secure chip control and thermal stability. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WSM33S grade improves thermal resistance and wear behaviour, which extends cutting edge life and supports consistent surface finish in demanding turning operations. Which chipbreaker should be selected for general turning tasks? The 1E239N12‑RD4 chipbreaker supplied with this insert provides reliable chip formation for a wide range of feeds and depths of cut, making it a versatile choice for typical turning programmes. Can this insert be used for finishing operations on stainless steel? Yes; the insert’s stable edge and coating are suitable for finishing passes on stainless steel when combined with appropriate feeds, speeds and cutting‑fluid strategies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for clarification of origin and product identity. There is no affiliation between our company and the trademark owners. The offered article is original, factory‑new merchandise of the respective manufacturer.
GX16-1E239N12-RF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WSM23S grade for reliable performance in difficult-to-machine materials; the result is stable edge life and consistent chip control. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. GX16-1E239N12-RF8 WSM23S indexable turning insert — Tiger‑tec Silver for stainless steels and superalloys (Walter Tools) A compact indexable turning insert, GX16-1E239N12-RF8 WSM23S, designed for demanding turning of rostfreie Stähle and heat-resistant superalloys, offering robust edge stability and dependable chip formation Tiger‑tec Silver coating for heat resistance WSM23S grade optimised for stainless and superalloys Chipbreaker 1E239N12‑RF8 for controlled chips Walter Tools quality and edge stability Longer tool life through advanced coating and grade The Tiger‑tec Silver coating combined with the WSM23S coated carbide substrate delivers improved heat resistance and wear properties, translating into longer tool life and fewer indexings. For workshops machining rostfreie Stähle or high-temperature alloys, this technology reduces thermal wear and supports a stable cutting edge, which means fewer interruptions for tool changes and a more consistent production pace. The result is measurable efficiency gains in continuous turning operations. Predictable chip control and process security Equipped with the 1E239N12‑RF8 chipbreaker, this insert promotes reliable chip formation under challenging turning conditions. Controlled chips reduce machine downtime and improve surface finish, providing a tangible productivity advantage when processing superalloys and titanium. The geometry supports repeatable results across batches, enabling planners to rely on steady cycle times and to simplify post-process handling of swarf. Application-focused benefits for workshop planning The combination of grade and chipbreaker makes the insert particularly suitable for components that demand thermal stability and abrasion resistance. Production engineers benefit from consistent edge behaviour and the ability to maintain tighter tolerances on parts made from rostfreie Stähle and heat-resistant alloys. Where process stability and predictable tool life affect overall throughput, this insert contributes to reduced rework rates and improved first-pass yields. Contact Metav Werkzeuge for tailored recommendations on insert grades and holder compatibility, or request a cutting data sheet for precise feed and speed settings for specific materials. Technical data Article number: GX16-1E239N12-RF8-WSM23S-WALTER Designation: GX16-1E239N12-RF8 WSM23S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Core specifications Grade: WSM23S Chipbreaker: 1E239N12‑RF8 Material suitability: Stainless steels (M), Superalloys/Titanium (S) Substrate/coating: Coated carbide (Tiger‑tec Silver) UID: GX16-1E239N12-RF8-WSM23S-WALTER Special features Optimised for difficult-to-machine materials Stable cutting edge and wear resistance Designed for secure chip formation Walter Tools production quality FAQ Which materials is this insert suitable for? The GX16-1E239N12-RF8 WSM23S insert is designed primarily for rostfreie Stähle and heat-resistant superalloys (ISO groups M and S), offering reliable edge stability on these materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WSM23S grade increases heat and wear resistance, resulting in extended tool life and improved process consistency when turning demanding alloys. What is the role of the 1E239N12‑RF8 chipbreaker? The 1E239N12‑RF8 chipbreaker promotes controlled chip formation to reduce swarf-related issues, enhance surface finish and support uninterrupted production sequences. Is this insert suitable for high-temperature titanium alloys? Yes, the insert’s S‑designation makes it applicable to titanium and similar heat‑resistant alloys, where thermal stress resistance and a stable cutting edge are essential. Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Mention of brand names serves explanatory purposes only and does not indicate any affiliation with our company.
GX16-1E250N02-GD3 WKP23S Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Silver coating and the WKP23S carbide grade for extended tool life and dependable chip control; the insert delivers consistent productivity in steel and cast iron turning operations and can be procured via Metav Werkzeuge for seamless supply management. GX16-1E250N02-GD3 WKP23S indexable turning insert — coated carbide, for steel & cast iron by Walter Tools The GX16-1E250N02-GD3 WKP23S is a coated carbide indexable turning insert engineered for efficient machining of steel and cast iron, offering predictable wear behaviour and stable chip formation in industrial turning applications. Tiger·tec Silver coating for long tool life Optimised for steel and cast iron machining Consistent chip control with 1E250N02-GD3 geometry Coated carbide grade WKP23S for reliable performance Greater process reliability through coating and grade optimisation The combination of the Tiger·tec Silver coating with the WKP23S carbide grade provides measurable improvements in wear resistance and edge stability. This specification is designed to reduce flank and crater wear under typical turning conditions for steel and cast iron, which in turn lowers the frequency of insert changes and supports higher machine uptime. The coated surface also improves heat resistance during interrupted cuts, helping to maintain dimensional consistency over longer production runs. Stable chip formation and geometry for predictable results The designated chipbreaker 1E250N02-GD3 promotes controlled chip formation and evacuation, minimising the risk of built-up edge and workpiece surface damage. For operators and process engineers, this results in fewer unexpected interruptions and more uniform surface finish quality. The geometry was developed to balance cutting forces and thermal load so that cycle times can be optimised without compromising edge life, enhancing overall shop-floor efficiency. Application flexibility across common engineering materials Specified for the ISO material groups P (steel) and K (cast iron), the insert suits a broad range of unalloyed and alloyed steels as well as many cast iron grades. The coated carbide composition grants sufficient robustness for typical turning tasks while still allowing fine surface finishes in finishing passes. This versatility makes it suitable for batch production and mixed-component manufacturing where material changes occur regularly. Efficiency and predictable maintenance for production planning Using a consistent insert grade and geometry like the WKP23S series simplifies tooling lists and spare-part inventory. The improved wear behaviour and stable cutting edge afforded by the coating support longer tool life, which reduces total tool consumption and contributes to steadier production costs. Process planners benefit from predictable replacement intervals and can schedule maintenance windows more effectively, supporting lean manufacturing objectives. Contact Metav Werkzeuge for tailored recommendations on integrating Walter Tools Tiger·tec Silver inserts into existing turning operations and to arrange supply of GX16-1E250N02-GD3 WKP23S items Technical data SKU: GX16-1E250N02-GD3-WKP23S-WALTER Product type: Indexable turning insert Designation: GX16-1E250N02-GD3 ISO designation: GX16-1E250N02-GD3 WKP23S Grade: WKP23S Series: Tiger-tec Silver Chipbreaker: 1E250N02-GD3 Material/application: P / K (steel / cast iron) Manufacturer: Walter Tools Facts No specific numerical cutting parameters provided in the data Special features Coated carbide grade WKP23S Tiger·tec Silver coating technology Optimised for steel and cast iron machining (ISO P and K) 1E250N02-GD3 chipbreaker for consistent chip control Designed for stable edge life and reproducible performance FAQ What materials is the GX16-1E250N02-GD3 WKP23S suitable for? The GX16-1E250N02-GD3 WKP23S is intended for ISO material groups P and K, meaning it is suitable for a wide range of steel and cast iron turning tasks. How does the Tiger·tec Silver coating benefit the insert? The Tiger·tec Silver coating improves thermal resistance and wear behaviour on the WKP23S grade, extending edge life and supporting consistent surface quality in routine turning operations. Can this insert be used for both roughing and finishing? The WKP23S grade combined with the 1E250N02-GD3 geometry offers a balance between robustness and finish capability; it can be used across different machining steps, depending on cutting parameters and application specifics. Is the chipbreaker 1E250N02-GD3 suitable for interrupted cuts? Yes, the 1E250N02-GD3 chipbreaker has been developed to promote controlled chip formation and evacuation, which helps manage thermal impact and reduces the risk associated with interrupted cuts. How does the insert support production planning and inventory control? Standardising on the WKP23S grade and a proven chipbreaker geometry simplifies tooling lists and spare stocks, enabling more predictable replacement cycles and improved maintenance scheduling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. The mention of brand names such as Walter Tools serves explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
GX16-1E250N02-UF4 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WKP23S grade for reliable chip control and long tool life; precise, productive turning of steel and cast iron is enabled by this insert. Order the turning insert directly via Metav Werkzeuge or ask our consultants if additional data is required. GX16-1E250N02-UF4 WKP23S turning insert – Tiger‑tec Silver coated carbide for steel and cast iron | Walter Tools The GX16-1E250N02-UF4 WKP23S is a turning insert designed for productive machining of steel and cast iron, combining a modern coated‑carbide grade with a geometry optimised for controlled chip formation. Tiger‑tec Silver coating for extended tool life WKP23S grade optimised for steel and cast iron Stable chip control for productive machining Suitable for conventional and CNC turning Maximise productivity with a coated‑carbide grade The Tiger‑tec Silver coating and WKP23S composition deliver a balanced combination of wear resistance and toughness. This results in longer tool life and fewer insert changes during production, which reduces machine downtime and improves throughput. For shops processing unalloyed and alloyed steels, the coated substrate helps manage the typical heat and abrasion that occur during turning operations, translating directly into lower tooling costs per component. Consistent chip control for safer, faster cycles The insert’s chipbreaker designation 1E250N02‑UF4 denotes a geometry engineered for reliable chip formation under varying cutting conditions. Predictable chip control reduces the risk of entanglement and improves surface integrity, especially when turning interrupted cuts or heavier depths of cut. Clear, reproducible chip behaviour also simplifies setting feed and speed parameters on CNC machines, contributing to stable process windows and reproducible results. Process security across conventional and CNC turning Built for demanding workshop and production environments, this indexable insert supports both manual lathes and automated turning centres. The robust cutting edge and coated carbide substrate provide process security, helping to maintain dimensional stability and preventing premature edge breakdown. The grade is particularly suited to series production where consistency and repeatability are required, thereby protecting cycle times and enhancing overall equipment efficiency. Broad material coverage and ISO‑aligned application Conforming to the ISO material groups, the insert is intended for group P (steel) and group K (cast iron) applications. For shops that handle a mix of unalloyed steels and cast components, the WKP23S grade offers versatile performance without constant tool changes. The insert is therefore a practical choice when reliability, simple inventory management and predictable surface quality are priorities. For high‑productivity turning with Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge for order placement or technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX16-1E250N02-UF4-WKP23S-WALTER Designation: GX16-1E250N02-UF4 WKP23S Product type: Turning insert (indexable insert) Series: Tiger‑tec Silver Grade: WKP23S Facts Material designation: P / K Main applications: Steel (P), Cast iron (K) Chipbreaker: 1E250N02‑UF4 Special features Coated carbide grade Optimised chip control geometry Suitable for conventional and CNC turning Stable cutting edge for consistent performance FAQ What materials can be machined with this insert? The GX16-1E250N02-UF4 WKP23S insert is designed primarily for steel (ISO group P) and cast iron (ISO group K) applications, providing reliable performance across these material families. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WKP23S grade enhances wear resistance and toughness, extending tool life and improving process stability during turning operations. Is this insert suitable for automated production? Yes, the coated carbide grade and robust geometry make the insert suitable for both conventional turning and CNC production, supporting reproducible cycles and reduced downtime. What does the chipbreaker code 1E250N02‑UF4 indicate? The code denotes the specific chipbreaker geometry and its intended chip‑forming behaviour; this geometry is optimised for controlled chip evacuation and consistent surface finish under typical turning conditions. Can the insert be used for interrupted cuts? The combination of grade and chipbreaker provides good resistance to the stresses of interrupted cuts, making it a practical option where occasional interruptions occur. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer. Walter Tools is a brand of Walter AG, part of the Sandvik Group.
GX16-1E250N02-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
The Tiger·tec Silver grade and Tiger-tec Silver coating deliver stable chip formation and extended edge life, making this insert a dependable choice for demanding turning operations on stainless steel and heat-resistant superalloys; order directly via Metav Werkzeuge or consult our specialists for a tailored recommendation. GX16-1E250N02-UF4 WSM33S indexable turning insert — Walter Tools (Tiger-tec Silver, chipbreaker UF4) The GX16-1E250N02-UF4 WSM33S is an indexable turning insert designed for heavy-duty turning of stainless steel and S-group superalloys, combining the Tiger·tec Silver coating with a robust chipbreaker for secure chip control. Tiger·tec Silver coating for high temperature stability WSM33S grade optimised for stainless steel and S alloys UF4 chipbreaker for predictable chip formation Precision and productivity in tough materials The combination of the Tiger·tec Silver coating and the WSM33S grade provides a balance of thermal resistance and edge stability that reduces flank wear and helps maintain consistent finish on high-strength materials. Designed as an indexable turning insert, the geometry GX16-1E250N02-UF4 integrates a dedicated chipbreaker that supports predictable chip formation under varying cutting conditions. For production environments where repeatable part quality and reduced tool change frequency matter, this insert contributes to improved process stability and lower overall machining downtime. Why this insert suits stainless steel and superalloys Materials in the M and S ISO groups are challenging because of high toughness and poor heat conduction. The WSM33S coated carbide grade is formulated to resist built-up edge and thermal softening, while the Tiger·tec Silver layer enhances surface hardness at elevated temperatures. Together these features promote a stable cutting edge and support controlled chip evacuation, which reduces the risk of surface damage. In practical terms, the result is fewer reworks and a more consistent surface finish when turning stainless steel or nickel‑base and titanium alloys. Practical benefits for workshop integration The insert’s standard designation and chipbreaker code (GX16-1E250N02-UF4) allow straightforward insertion into existing tool assemblies and tool management systems. As a coated carbide insert with a proven chip control geometry, it supports higher cutting parameters than uncoated grades, enabling shorter cycle times without compromising tool life. Documentation and tool lists benefit from the clear ISO-style designation, making procurement and inventory control more efficient for manufacturing teams focused on throughput and repeatability. Technical support and application advice For challenging turning tasks, cutting data and grade selection are decisive. Support is available to match the indexable turning insert to machine rigidity, workholding and coolant strategy. If further cutting parameters or application-specific recommendations are required, Metav Werkzeuge’s technical team can assist with cutting-speed guidance, feed optimisation and recommended insert clamping to achieve best results on stainless steel and S-group alloys. Contact details are provided for direct consultation and data requests. Contact Metav Werkzeuge for application advice and order assistance on Walter Tools Tiger·tec Silver inserts — phone or e‑mail support is available for cutting data and selection guidance Technical data SKU: GX16-1E250N02-UF4-WSM33S-WALTER Designation: GX16-1E250N02-UF4 WSM33S Series: Tiger-tec Silver Grade: WSM33S Chipbreaker: 1E250N02-UF4 Product type: indexable turning insert Core data Material groups: S / M Application (M): stainless steel Application (S): heat-resistant superalloys and titanium Special features Coated carbide (Tiger·tec Silver) Optimised for stable chip formation Designed for productive machining of difficult materials FAQ What materials is this insert intended for? The insert is aimed at machining stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), taking advantage of the WSM33S grade and Tiger·tec Silver coating for thermal and edge stability. How does the chipbreaker GX16-1E250N02-UF4 affect cutting? The UF4 chipbreaker guides chip formation to be short and controllable, improving process security and surface quality when using the GX16-1E250N02-UF4 WSM33S indexable turning insert from Walter Tools. Is this insert compatible with existing toolholders? The insert uses a standard ISO‑style designation, which simplifies matching with compatible toolholders; ensure the holder accepts the GX16 form and the specified chipbreaker geometry. Can the supplier provide cutting data for stainless steel? Yes. Metav Werkzeuge can supply recommended cutting speeds, feeds and coolant strategies for the Walter Tools GX16-1E250N02-UF4 WSM33S insert based on the specific stainless steel grade and machining setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory‑new goods of the manufacturer.
GX16-1E275N01-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WSM23S grade for reliable edge stability and secure chip control in demanding turning applications; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. GX16-1E275N01-UF8 WSM23S — Turning insert with Tiger‑tec Silver, Walter Tools A GX16-1E275N01-UF8 WSM23S turning insert engineered for robust performance when machining rostfreier Stahl and heat‑resistant superalloys in demanding turning operations Tiger‑tec Silver coating for edge strength Optimised chipformer 1E275N01‑UF8 Designed for rostfreier Stahl and superalloys Walter Tools quality and consistent performance Stable cutting performance for difficult materials The combination of the Tiger‑tec Silver coating and the WSM23S carbide grade delivers a balance of heat resistance and edge stability that is crucial when machining rostfreier Stahl or high‑temperature alloys. The coating reduces built‑up edge formation and improves wear resistance under elevated thermal loads, which translates into fewer interruptions for tool changes and more consistent part quality. This results in predictable tool life and reproducible surface finishes in serial production. Reliable chip control that reduces process interruptions The integrated 1E275N01‑UF8 chipformer and the insert geometry are optimised to promote controlled chip breakage and evacuation. Consistent chip control reduces the risk of entanglement, minimises rework, and supports higher cutting parameters where the machine and workpiece allow. The design contributes to measurable increases in process security and machine uptime, making the insert suitable for both roughing and semi‑finish turning cycles where stable metal removal is required. Practical compatibility and application guidance for workshops This turning insert is intended for standard turning toolholders and is appropriate for workshop environments focused on machining S / M material groups under ISO 513 classifications. Its properties make it a practical choice for component manufacturers who require a robust solution for rostfreier Stahl and nickel‑based alloys. For selection of the correct insert geometry or recommendations on cutting speed and feed for specific workpiece conditions, technical consultation can be provided to align tool choice with productivity goals and part tolerances. Contact Metav Werkzeuge today for tailored cutting data and ordering support for Walter Tools Tiger‑tec Silver inserts and assemblies Technical Data SKU: GX16-1E275N01-UF8-WSM23S-WALTER Product type: Turning insert Designation: GX16-1E275N01-UF8 WSM23S Series: Tiger‑tec Silver Grade: WSM23S Chipformer: 1E275N01‑UF8 Manufacturer: Walter Tools Facts Material groups: S / M Suitable for: rostfreier Stahl, heat‑resistant superalloys Application: turning operations Special features Tiger‑tec Silver coating technology Coated carbide grade WSM23S Optimised chip control geometry Stable cutting edge for demanding materials Designed for industrial turning applications FAQ What materials is this insert designed to machine? The GX16-1E275N01‑UF8 WSM23S insert from Walter Tools is formulated for machining rostfreier Stahl and heat‑resistant superalloys (ISO 513 groups M and S), offering improved edge stability under high thermal stress. Does the insert require a specific chipformer for good chip control? The integrated 1E275N01‑UF8 chipformer is part of the insert geometry and is optimised to provide reliable chip control across common turning operations with rostfreier Stahl and superalloys. Can this insert be used for both roughing and finishing? Depending on the chosen insert geometry and cutting parameters, the grade WSM23S and its coating enable use in both roughing and semi‑finish turning where heat resistance and edge strength are required. How does the Tiger‑tec Silver series benefit production? The Tiger‑tec Silver technology supports stable cutting edges and reduced built‑up edge tendency, which helps increase process reliability and lowers the frequency of tool changes in serial production. Which series and chipformer are specified for this SKU? The insert is part of the Tiger‑tec Silver series, grade WSM23S, with chipformer 1E275N01‑UF8 specified for controlled chip behaviour and durable performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
GX16-1F200N02FS-F1 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of WDN10 polycrystalline diamond grade and a precisely profiled 1F200N02FS-F1 chipbreaker to achieve long tool life and consistent performance in abrasive, non‑ferrous applications; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. GX16-1F200N02FS-F1 WDN10 indexable turning insert by Walter Tools — PCD grade for abrasive non‑ferrous machining The GX16-1F200N02FS-F1 WDN10 is an indexable turning insert engineered for high‑wear machining of abrasive, non‑ferrous materials, combining a polycrystalline diamond grade with a dedicated chipbreaker geometry. Polycrystalline diamond (PCD) grade WDN10 Optimised chipbreaker 1F200N02FS-F1 For abrasive non‑ferrous materials High wear resistance and productivity Consistent performance on abrasive, non‑ferrous materials The polycrystalline diamond composition of the WDN10 grade provides outstanding wear resistance, making it particularly suitable for aluminium alloys with abrasives, graphite‑filled materials and other non‑ferrous, abrasive substrates. The diamond microstructure resists abrasive wear where conventional carbide would rapidly degrade. This results in extended cutting intervals and fewer insert changes, which supports a more predictable production flow and reduced process downtime. The insert’s geometry is designed to maintain stable cutting conditions and to produce repeatable results across batches. Reliable chip control and surface quality An optimised chipbreaker labelled 1F200N02FS‑F1 ensures controlled chip formation and safe evacuation during turning operations. Controlled chips reduce the risk of re‑cutting, improve surface finish and lower the likelihood of machine interruptions. For shops aiming to balance throughput with component quality, this geometry helps deliver smooth surfaces and consistent tolerances while reducing manual rework or additional finishing operations. The result is a tangible improvement in both productivity and downstream processing. Practical integration and economical machining As an indexable insert with a clearly defined designation, the GX16‑1F200N02FS‑F1 simplifies tooling logistics: the consistent specification aids in holder selection and inventory management. When the correct seat and clamping are applied, the indexable turning insert supports repeatable results and predictable tool life. Selecting a PCD grade such as this can lower total machining cost per part in high‑volume or abrasive applications by decreasing insert consumption and reducing machine standstill for tool changes. For unfamiliar material mixes, checking the product matrix for compatibility is recommended to ensure the chosen grade aligns with the specific alloy and abrasive content. Contact Metav Werkzeuge for application advice on the Walter WDN10 grade and to confirm availability and suitable toolholders for the GX16‑1F200N02FS‑F1 insert Technical Data Article number: GX16-1F200N02FS-F1-WDN10-WALTER Label: Drehwendeschneidplatte GX16-1F200N02FS-F1 WDN10 Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Grade/series: WDN10; polycrystalline diamond (PCD) Chipbreaker: 1F200N02FS-F1 Insert designation: GX16-1F200N02FS-F1 WDN10 SKU: GX16-1F200N02FS-F1-WDN10-WALTER Special features Material information: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Application note: Suitable for abrasive, non‑ferrous materials; check product matrix for exact suitability Geometry/code: GX16-1F200N02FS-F1 FAQ What materials is this insert intended for? The GX16‑1F200N02FS‑F1 WDN10 indexable turning insert is designed primarily for abrasive, non‑ferrous materials where the WDN10 PCD grade provides superior wear resistance compared with conventional grades. How does the PCD grade affect tool life? The polycrystalline diamond (PCD) structure of the WDN10 grade increases resistance to abrasive wear, which typically extends insert life in suitable applications and reduces the frequency of replacements. Is the chipbreaker suitable for standard turning operations? The integrated 1F200N02FS‑F1 chipbreaker is optimised for controlled chip formation in turning; correct matching with the holder and cutting parameters supports stable operation and improved surface finish. Can this insert replace carbide inserts in all cases? PCD‑based inserts like the WDN10 grade excel on abrasive, non‑ferrous materials but are not a universal substitute for carbide in all applications; review the material composition and consult the product matrix to confirm suitability. What designation should be used when ordering or verifying stock? Use the full designation GX16‑1F200N02FS‑F1 WDN10 or the SKU GX16-1F200N02FS-F1-WDN10-WALTER to ensure accurate identification. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanatory purposes. There is no affiliation between our company and the listed brands. The offered item is an original, brand‑new product from the manufacturer.
GX16-1F200N10FS-M1 WDN10 Wendeplatten - Walter Tools
Take advantage of the WDN10 polycrystalline diamond grade for highly abrasive, non-ferrous workpieces and benefit from a chipbreaker geometry engineered for consistent chip control; order directly via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge for process optimisation. GX16-1F200N10FS-M1 WDN10 Indexable Turning Insert – PKD grade for non-ferrous machining | Walter Tools The GX16-1F200N10FS-M1 WDN10 is an indexable turning insert optimised for high-wear machining of non‑ferrous and abrasive, non‑iron materials, combining a PKD cutting grade with a dedicated chipbreaker for stable cutting performance Polycrystalline diamond (PKD) grade WDN10 High wear resistance for abrasive materials Optimised for non‑ferrous metals machining Proven wear resistance for abrasive non‑ferrous materials The PKD-based WDN10 grade provides exceptional wear resistance, which translates into longer edge life when machining abrasive non‑ferrous alloys and composites. Polycrystalline diamond is significantly harder than conventional carbide grades, so the cutting edge resists abrasive degradation and maintains geometry over extended runs. This durability reduces tool change frequency and helps sustain consistent surface finish levels across batch series. The result is a measurable improvement in machine uptime and a reduction in process interruptions when working with materials that rapidly blunt other tool types. Consistent chip control and predictable process behaviour The insert’s 1F200N10FS‑M1 chipbreaker is designed to generate controllable chips and stable cutting forces during turning operations. Predictable chip formation reduces the risk of surface damage and tool interference, which supports automated or semi‑automatic turning cells. Because the geometry balances shear and compressive forces, feed and speed windows can be set with confidence; this yields reproducible cycle times and simplifies process documentation. Engineers benefit from lower variability in machining data, making the insert suitable for production environments where repeatability and component tolerances are critical. Application guidance and economical production benefits Selecting a PKD insert of this specification is primarily recommended for non‑ferrous and abrasive, non‑iron materials; the grade should be matched to the specific workpiece material and process parameters. When compared on a cost‑per‑part basis, the longer tool life of a PKD insert often offsets the higher unit cost through fewer tool changes, improved surface quality and reduced rework. For initial setup, start with conservative cutting speeds and monitor wear progression to determine optimised parameters. The combination of a high‑performance cutting grade and a dedicated chipbreaker supports both short runs with high quality demands and longer series where tool life directly affects productivity. Contact Metav Werkzeuge for tailored application support and to order Walter Tools GX16-1F200N10FS-M1 WDN10 PKD inserts; consultants can advise on grade matching and parameter setup Technical data SKU: GX16-1F200N10FS-M1-WDN10-WALTER Designation: GX16-1F200N10FS-M1 WDN10 Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts No numerical dimensions provided in the source data No cutting parameters provided in the source data Special features Grade: WDN10 (polycrystalline diamond, PKD) Chipbreaker: 1F200N10FS‑M1 Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig Typical application: Non‑ferrous and abrasive, non‑iron materials (verify workpiece compatibility) FAQ What materials is this insert suitable for? The insert GX16‑1F200N10FS‑M1 WDN10 is intended for non‑ferrous and abrasive, non‑iron materials, using the PKD grade to provide superior wear resistance. Can this PKD insert be used on steel or stainless steel? PKD grades such as WDN10 are not generally recommended for machining steel or rostfreier Stahl due to affinity and diffusion risks; the GX16‑1F200N10FS‑M1 is optimised for non‑ferrous applications. How does the chipbreaker 1F200N10FS‑M1 affect process stability? The 1F200N10FS‑M1 chipbreaker promotes controllable chip formation and stable cutting forces, enhancing repeatability and surface quality in turning processes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX16-2 GX16-2 Nicht zutreffend Wendeplatten - Walter Tools
Benefit from the combination of precise chip control and Walter Tools' manufacturing quality for dependable turning operations; order genuine inserts or consult Metav Werkzeuge's specialists for application support. GX16-2 indexable turning insert – Chipbreaker 2 | Walter Tools The GX16-2 is an indexable turning insert engineered to deliver controlled chip formation and reliable performance in standard turning applications. Indexable turning insert GX16-2 Chipbreaker type 2 for controlled chips Walter Tools manufacturing quality Consistent chip control for uninterrupted production The insert's defining characteristic is its chip control capability, specified here as chipbreaker 2, which helps maintain predictable chips during turning. Predictable chip formation reduces machine stoppages and eases automatic chip evacuation, directly contributing to higher process efficiency. In practice, this means fewer manual interventions and a more stable machining rhythm, which supports consistent cycle times and improves overall shop-floor throughput. Stable cutting edge behaviour for reliable results Manufactured by Walter Tools, the component is intended to offer dependable edge behaviour across repeated indexings. Stable edge performance supports process stability and repeatable results, which are essential for serial production and quality control. Where tool life consistency is valued, a well-engineered insert design like this one minimises variability in surface finish and dimensional outcomes, helping to avoid unexpected rejects and maintain production targets. Clear selection guidance and straightforward application Selection of an indexable insert should align with the holder style and the intended turning strategy. The GX16-2 designation clarifies the insert type, while the chipbreaker classification assists in matching the insert to material behaviour and cutting conditions. For workshops seeking to integrate this insert into existing tool systems, Metav Werkzeuge can supply technical advice on holder matching and cutting data recommendations to ensure optimal performance without guesswork. Assistance is available for customers requiring specification support or process alignment. Contact Metav Werkzeuge for tailored recommendations on toolholders and application parameters for Walter Tools GX16-2 inserts via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: GX16-2--WALTER Product name: Drehwendeschneidplatte GX16-2 Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Facts Chipbreaker: 2 Series: Not applicable Design & special features Designation: GX16-2 ISO designation: GX16-2 Series note: No detailed series description available in provided catalogues FAQ What does chipbreaker type 2 indicate? Chipbreaker type 2 denotes a geometry designed to promote controlled chip formation under typical turning conditions; the GX16-2 insert uses this chip control to reduce irregular chips and support smooth evacuation. Is the GX16-2 an original Walter Tools product? Yes, the GX16-2 is offered as a genuine Walter Tools indexable turning insert and is described here with the manufacturer's designation. How is the GX16-2 identified in a tool list? The insert is listed under the designation GX16-2 and is classified as a turning indexable insert with chipbreaker 2 in product documentation. Can the GX16-2 improve surface finish? By providing consistent chip control and stable edge behaviour, the insert can contribute to a more consistent surface finish when used with appropriate cutting parameters and holder setup. Where to get advice on matching the insert to a toolholder? Technical guidance for pairing the GX16-2 with suitable toolholders and selecting cutting parameters is available from Metav Werkzeuge's consultants and product specialists. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only. There is no affiliation between our company and the named manufacturers; the offered article is original, factory-new goods of the manufacturer.
GX16-2E100L00-GD8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver heat resistance and the WSM23S coated carbide grade for reliable machining of stainless steels and superalloys; the optimised chipbreaker reduces rework and supports steady production. Order the insert directly via Metav Werkzeuge or consult the specialists for material-specific recommendations. GX16-2E100L00-GD8 WSM23S indexable turning insert by Walter Tools — Tiger·tec Silver coating, for stainless steel and superalloys GX16-2E100L00-GD8 WSM23S is an indexable turning insert designed for demanding turning applications in heat-resistant alloys and stainless steels Tiger·tec Silver coating for heat resistance Optimised chipbreaker for stable chip control Coated carbide grade WSM23S for tough alloys Suitable for stainless steel and superalloys Improved thermal stability for high-temperature turning The Tiger·tec Silver coating, combined with the WSM23S coated carbide grade, delivers superior thermal stability when machining materials that generate high cutting temperatures. This results in a stable cutting edge and reduced flank wear, which translates into longer intervals between indexings and fewer unexpected tool changes. For workshops processing stainless steel and heat-resistant alloys, the improved resistance to edge degradation means more predictable cycle times and less scrap, supporting leaner throughput and consistent part quality. Predictable chip formation and better surface quality The integrated chipbreaker (2E100L00-GD8) has been optimised to produce consistent chips when turning ductile, work-hardening materials. Reliable chip control reduces the risk of chip re-cutting and surface damage, contributing to improved surface finish and less secondary finishing work. In practice this delivers time savings on complex operations and reduces machine downtime caused by chip management, increasing overall process efficiency. Greater productivity and cost efficiency per part By combining a robust grade with an advanced coating, the insert supports higher cutting parameters and sustained performance in challenging materials. The outcome is enhanced productivity through longer tool life and fewer insert changes, which reduces operator intervention and changeover time. For batch production and small-series work alike, users benefit from more uptime and a more economical cost per part without compromising on dimensional accuracy or repeatability. Application guidance and material compatibility The grade WSM23S is intended for the ISO material groups M (stainless steels) and S (heat-resistant superalloys and titanium). These materials tend to be thermally demanding and can promote built-up edge; the combination of coating and chip geometry on this insert aims to support a controlled, safe cut and stable edge retention. Selection of cutting data should consider workpiece alloy, rigidity of setup and toolholder geometry; for specific cutting parameters or to confirm suitability for a given alloy, Metav Werkzeuge's technical advisors can provide tailored recommendations. Discuss application-specific optimisation with Metav Werkzeuge to select the ideal Walter Tools GX16-2E100L00-GD8 WSM23S insert and cutting data for stainless steel and superalloy machining Technical data Article number: GX16-2E100L00-GD8-WSM23S-WALTER Designation: GX16-2E100L00-GD8 WSM23S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Core data Applicable material groups: M, S (ISO 513) Grade: WSM23S Chipbreaker: 2E100L00-GD8 Special features Coated carbide (beschichtetes Hartmetall) Tiger·tec Silver coating for heat resistance Optimised chipbreaker for stable chip control Suitable for stainless steel and superalloys Stable cutting edge and long tool life FAQ What materials is this insert suitable for? The GX16-2E100L00-GD8 WSM23S insert is suitable for ISO material groups M (stainless steel) and S (heat-resistant superalloys and titanium), with the grade optimised for thermal stability and edge retention. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM23S grade improves heat resistance and reduces wear, which helps maintain a stable cutting edge and extends the useful life of the insert in demanding turning operations. What role does the chipbreaker 2E100L00-GD8 play? The 2E100L00-GD8 chipbreaker is engineered for consistent chip formation and control when machining tough or ductile materials, contributing to better surface finish and fewer interruptions due to problematic chips. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer.
GX16-2E100R00-GD8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver grade and the WSM23S coating technology to secure a stable cutting edge and reliable chip formation when machining demanding materials; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. GX16-2E100R00-GD8 WSM23S Drehwendeschneidplatte — Tiger·tec Silver grade for rostfreier Stahl and superalloys (Walter Tools) GX16-2E100R00-GD8 WSM23S is a coated turning insert designed for high-demand finishing and semi-finishing of difficult-to-machine alloys, optimised for applications where edge stability and heat resistance are critical Tiger·tec Silver coated carbide grade WSM23S Optimised for rostfreier Stahl and superalloys Stable cutting edge for productive machining Higher process reliability with a heat-resistant grade The Tiger·tec Silver family combines advanced coating technology with a wear-resistant substrate to deliver consistent performance in challenging cycles. The WSM23S grade is a coated carbide formulation tailored for materials that generate heat and promote built-up edge formation. In practical terms, this means improved tool life and fewer interruptions for index changes during serial production, reducing idle time and increasing throughput for turning processes. Improved surface finish and controlled chip behaviour Built-in geometries and the specified chipbreaker code 2E100R00-GD8 enable predictable chip formation when machining rostfreier Stahl and heat‑resistant superalloys. Predictable chips protect the workpiece and the machine tool, while the coating supports a cleaner shear zone to enhance the surface finish. For shops processing demanding alloys, the combination of geometry and grade translates into fewer rework steps and more consistent part quality across batches. Practical selection and integration for workshop efficiency The insert designation provides clear guidance for matching holders and cutting parameters; using the right toolbody and adjusted cutting data ensures the stable cutting edge characteristic of this range. Selection of coolant strategy and feed rates, informed by the insert’s intended application, supports productive machining and lowers overall cycle costs. The specification is suitable where repeatable performance and predictable tool change intervals are priorities, making the insert a reliable choice for mixed production environments handling stainless and high-temperature alloys. Request application advice from Metav Werkzeuge for optimised cutting parameters and toolholder compatibility for Walter Tools inserts; contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for swift, practice‑oriented support. Technical Data Article number: GX16-2E100R00-GD8-WSM23S-WALTER Label: Drehwendeschneidplatte GX16-2E100R00-GD8 WSM23S Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM23S Chipbreaker: 2E100R00-GD8 ISO designation: GX16-2E100R00-GD8 WSM23S Core data Material suitability: S / M rostfreier Stahl application: yes SKU: GX16-2E100R00-GD8-WSM23S-WALTER Special features Coating technology: Tiger·tec Silver Coated carbide grade optimised for heat resistance Designed for stable chip formation and edge retention Intended for heavy-duty and demanding alloy machining FAQ What materials is this insert suitable for? The GX16-2E100R00-GD8 WSM23S insert is specified for rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) as described by the grade characteristics. What does the Tiger·tec Silver designation mean in practice? Tiger·tec Silver denotes a multi‑layer coating system that enhances wear resistance and heat tolerance on the WSM23S coated carbide to support longer tool life in demanding turning operations. How does the chipbreaker 2E100R00-GD8 affect machining? The chipbreaker geometry promotes consistent chip curling and safe chip evacuation, improving surface appearance and reducing risk to the toolholder and machine. Is this insert intended for finishing or roughing operations? The combination of grade and geometry suits finishing and semi‑finishing where edge stability and surface quality are required; application specifics depend on toolholder selection and cutting data. How should cutting data be adapted for rostfreier Stahl? Lower cutting speeds and optimised feeds, combined with appropriate cooling strategies, typically deliver the best balance between performance and tool life for the WSM23S grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com