DNMG150612-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise RP5 chip control, and a robust rhombic geometry for consistent steel turning performance; order directly via Metav Werkzeuge or consult our team for tailored machining guidance. DNMG150612-RP5 WPP10G turning insert — Walter Tools, Tiger·tec Gold for steel machining The DNMG150612-RP5 WPP10G is a coated carbide turning insert designed for reliable, productive machining of steel, offering a dedicated chipbreaker and a 55° rhombic geometry for versatile external turning tasks Tiger·tec Gold coating for long life Robust RP5 chipbreaker for stable chips Rhombus 55° geometry for versatile turning Consistent tool life and predictable wear for production turning The Tiger·tec Gold technology and the WPP10G grade combine to deliver a coated carbide surface that reduces wear under the thermal and mechanical loads typical in steel turning. This results in longer tool life and fewer indexings, which lowers tooling costs and minimises unplanned downtime. The coating optimises friction and heat resistance, making the insert especially suitable for medium-duty to demanding pass cuts where process reliability is essential. For decision-makers seeking measurable productivity improvements, the harder surface and controlled flank wear translate into more predictable component tolerances and reduced scrap rates. Reliable chip control and surface integrity for everyday machining The integrated RP5 chipbreaker offers consistent chip formation and evacuation, supporting steady cutting conditions and safer swarf management. Combined with the negative 0° rake, the insert provides a sturdy cutting edge that withstands interrupted cuts and moderate feed rates, contributing to improved surface finish and dimensional consistency. This configuration benefits workshops that require both robust machining and repeatable results, as the design reduces the risk of built-up edge and supports consistent cycle times across shifts. Geometry and corner radius tuned for dimensional accuracy The rhombic 55° form and corner radius 1.2 mm are chosen to balance strength and finish: the geometry enables versatile approach angles for external turning, while the radius offers a favourable compromise between edge resilience and achievable surface quality. Together these features reduce the likelihood of chatter when paired with correct holder selection and machine rigidity, which is particularly important in batch production where repeatability matters. The insert’s tolerance class M supports consistent seating in standard tool holders, aiding interchangeability across machines. Application focus and material suitability explained This insert is specified for machining steel (P) in accordance with common ISO groupings; the grade composition and coating accommodate the heat and chip characteristics of unalloyed and alloyed steels. For engineers unfamiliar with grade coding: WPP10G denotes a Walter grade within the Tiger·tec Gold family, optimised for wear resistance and general-purpose steel applications. The design therefore suits workshops that prioritise throughput and dependable cutting performance on a wide range of steel parts, from medium carbon components to alloyed steels requiring stable chip control. For reliable steel turning with the Walter Tools Tiger·tec Gold grade, contact Metav Werkzeuge for ordering and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holder geometry and cutting data. Technical Data Article number: DNMG150612-RP5-WPP10G-WALTER Designation: DNMG150612-RP5 WPP10G Series: Tiger-tec Gold Grade: WPP10G Manufacturer: Walter Tools Numbers / Core technical data Size: 15 mm Thickness: 06 Corner radius: 1.2 mm Rake angle: 0° (negative) Geometry: Rhombus 55° Tolerance class: M Special features / Versions Coating: Tiger·tec Gold (coated carbide technology) Chipbreaker: RP5 Material suitability: Steel (P) Grade family: coated hardmetal Execution: G FAQ What materials is this insert intended for? The DNMG150612-RP5 WPP10G insert from Walter Tools is specified for machining steel (ISO group P), with the WPP10G grade optimised for wear resistance and reliable chip control in steel turning. How does the RP5 chipbreaker affect cutting? The RP5 chipbreaker on this insert promotes stable chip formation and evacuation, improving swarf control and supporting consistent surface quality during turning operations. Is the corner radius suitable for finishing passes? A corner radius of 1.2 mm provides a balance between edge strength and surface finish; it is suitable for medium finishing and semi-finishing when paired with appropriate feeds and speeds. Can this insert handle interrupted cuts? With a negative 0° rake and a robust coated carbide grade, the insert is well suited to withstand interrupted cuts and moderate shock loads common in many turning applications. Which series and coating technology does this grade use? The insert belongs to the Tiger-tec Gold series; the WPP10G grade is a coated hardmetal composition designed for process-stable machining of steels. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is original and brand-new.
DNMG150612-RP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant Tiger‑tec Gold grade, a controlled RP5 chipbreaker and a robust 0° negative rake to maintain steady production in steel turning operations; order directly via Metav Werkzeuge or request application advice from our consultants. DNMG150612-RP5 WPP20G Turning Insert — Tiger‑tec Gold, for Steel (P) — Walter Tools DNMG150612-RP5 WPP20G is a robust indexable turning insert engineered for efficient steel turning with a Tiger‑tec Gold coated grade and RP5 chipbreaker Tiger‑tec Gold coated carbide for long life RP5 chipbreaker for stable chip control Rhombic 55° insert with 1.2 mm corner radius 0° negative rake for robust roughing Increase uptime with a wear‑resistant grade The Tiger‑tec Gold coating delivers a high level of wear resistance and consistent edge stability under the elevated temperatures typical for steel machining. By combining a coated cemented carbide substrate with an application‑optimised grade, the insert reduces flank and crater wear, which translates directly into longer tool life and fewer index changes. This results in measurable productivity gains and lower per‑component tooling costs when machining unalloyed and alloyed steel (P). Achieve reliable chip control and process security The RP5 chipbreaker is designed to form short, manageable chips in a wide range of cutting conditions, improving swarf evacuation and reducing risk to both workpiece and machine. Stable chip formation contributes to predictable cycle times and lowers the likelihood of interruptions caused by tangled or hot chips. For everyday turning work where consistent throughput is essential, this geometry offers a practical balance between chip control and cutting forces. Robust geometry for consistent dimensional quality A rhombic 55° contour combined with a 1.2 mm corner radius and 0° negative rake provides a sturdy cutting edge that tolerates heavier depths of cut and interrupted cuts better than finer‑edged alternatives. The geometry supports stable engagement with the workpiece, helping to maintain surface finish and dimensional repeatability across batches. The insert shape also facilitates a broad range of turning profiles without frequent tool changes. Practical selection guidance for steel turning The grade designation WPP20G identifies a universal, wear‑resistant coated carbide suitable primarily for steel according to ISO group P. When roughing or mixed turning is the priority, the combination of 0° negative rake and the RP5 chipbreaker ensures robustness and manageable chips; for high‑precision finishing, reduced depth of cut and adjusted feeds will exploit the coating’s fine edge stability. The insert thickness and size support common toolholders for DNMG‑style geometry. Choose the Walter Tools Tiger‑tec Gold grade for consistent performance — contact Metav Werkzeuge for application advice and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: DNMG150612-RP5-WPP20G-WALTER Name: DNMG150612-RP5 WPP20G Manufacturer: Walter Tools Facts Insert shape: Rhombic 55° Corner radius: 1.2 mm Free cutting angle: 0° (negative) Insert size: 15 Plate thickness: 06 Tolerance class: M Special features Grade/coating: Tiger‑tec Gold (WPP20G), coated cemented carbide Chipbreaker: RP5 Execution: G Applicable material group: P (Steel) Series: Tiger‑tec Gold Product type: Turning insert (indexable) FAQ What steels is this insert recommended for? The DNMG150612‑RP5 WPP20G turning insert is developed for ISO group P (steel), covering unalloyed and alloyed steels where typical heat and chip behaviour occurs. How does the RP5 chipbreaker affect production? The RP5 chipbreaker on the WPP20G grade promotes short, controllable chips which improve swarf management and help maintain uninterrupted machine cycles during turning operations. What machining benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating on this insert enhances wear resistance and edge stability, helping to extend tool life and secure consistent component quality over longer runs. Is the geometry suitable for roughing and finishing? With a 0° negative rake and a 1.2 mm corner radius, the insert offers robustness for roughing; reducing depth of cut and feed allows the same insert to achieve improved finishes when required. Which product identifier should be used when specifying this insert? Reference the full designation DNMG150612‑RP5 WPP20G (SKU: DNMG150612-RP5-WPP20G-WALTER) and Walter Tools as the manufacturer for precise procurement and toolholder compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for descriptive purposes only and do not imply any affiliation with or endorsement by the trademark holders. The offered item is an original, factory‑new product from the stated manufacturer.
DNMG150612-RP5 WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WPP30G grade for reliable steel turning, plus the RP5 chipbreaker for consistent chip control; order directly via Metav Werkzeuge or consult the team for tailored machining advice. DNMG150612-RP5 WPP30G turning insert (for steel) — Tiger·tec Gold, Walter Tools The DNMG150612-RP5 WPP30G is a rhombic 55° turning insert engineered for robust and productive steel machining in general turning applications. Tiger·tec Gold coated carbide Optimised RP5 chipbreaker 1.2 mm corner radius for robustness Rhombic 55° geometry, 15 mm size High-performance grade for steel machining The WPP30G grade, part of the Tiger·tec Gold series, is a coated carbide formulation developed for reliable performance when turning steel. Designed for the thermal and chip-formation characteristics typical of steel machining, this grade offers a balance between wear resistance and toughness that supports longer tool life under industrial cycle times. The specification suits workshops aiming for steady production with fewer insert changes and predictable performance. Consistent chip control and machining productivity Equipped with the RP5 chipbreaker, this insert provides controlled chip formation and evacuation, reducing interruptions and operator handling. The chip geometry is optimised for common turning parameters, enabling higher metal removal rates without compromising surface finish. As a result, process stability improves and cycle times shorten, which contributes directly to reduced machining costs and greater throughput on automated and manual lathes alike. Geometry and edge strength for demanding cuts The rhombic 55° form combined with a 1.2 mm corner radius enhances edge strength and distributes cutting forces across a broader area. The negative 0° relief produces a robust edge suitable for heavier cuts and interrupted cuts where a stable cutting edge is essential. These geometric choices reduce the risk of chipping and support repeatable dimensional results in batch production and one-off engineering tasks. Practical fit for workshop routines With a 15 mm size and tolerance class M, the insert integrates with standard DNMG toolholders and clamping systems, simplifying tooling logistics. The coated carbide composition and series design aim to cover a broad range of steel types according to ISO 513 group P, making the insert a versatile option for general engineering, maintenance, and production turning operations. For further machining parameters or to confirm compatibility with a specific machine setup, technical consultation is available. Contact Metav Werkzeuge today for supply and application guidance on Tiger·tec Gold turning inserts from Walter Tools — Metav Werkzeuge can advise on cutting data and delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: DNMG150612-RP5-WPP30G-WALTER Designation: DNMG150612-RP5 WPP30G Manufacturer: Walter Tools Core specifications Geometry: Rhombus 55° Corner radius: 1.2 mm Size: 15 mm Thickness: 06 Relief angle: 0° (negative) Tolerance class: M Features & applications Series: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: RP5 Material group: Steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The DNMG150612-RP5 WPP30G insert from Walter Tools is specified for steel machining (ISO material group P) and is designed to handle the thermal and chip-formation properties typical of these alloys. How does the RP5 chipbreaker benefit production? The RP5 chipbreaker on this indexable insert stabilises chip formation and evacuation, which reduces interruptions and supports higher metal removal rates with improved surface consistency. What does the negative 0° relief mean for cutting performance? A 0° negative relief provides a stronger cutting edge that is better suited to heavier and interrupted cuts, improving edge stability and resistance to chipping during demanding operations. Is this insert compatible with standard DNMG toolholders? The insert follows the DNMG form and 15 mm size, making it compatible with standard toolholders designed for DNMG turning inserts when clamped according to manufacturer guidelines. Can this grade be used for finishing passes? Yes; the WPP30G grade balances wear resistance and toughness, allowing for both roughing and finishing passes in many steel turning tasks when appropriate cutting parameters are selected. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer (Walter Tools).
DNMG150616-MK5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip formation and precise geometry for consistent cast-iron turning. The insert delivers predictable tool life and reliable chip control in production environments. Order directly via Metav Werkzeuge or contact the consultants for cutting-data optimisation. DNMG150616-MK5 WKK10S — Turning insert for cast iron by Walter Tools The DNMG150616-MK5 WKK10S is a negative‑rake, 55° rhombic turning insert optimised for productive machining of cast iron in general turning applications Tiger·tec Silver coating for wear resistance Grade WKK10S optimised for cast iron machining 55° rhombic shape for versatile tool set-ups 1.6 mm corner radius for stable cutting forces MK5 chipbreaker for controlled chip formation Reliable performance for abrasive cast‑iron work The combination of the WKK10S grade and the Tiger·tec Silver coating addresses the typical abrasive wear associated with castings. The grade is tuned for short, brittle chips and frequent micro‑fracture, which means the insert maintains edge integrity under high abrasion. As a result, machining cycles are more predictable and tool change intervals are reduced, supporting higher throughput and lower unit costs in serial production. Geometry engineered for stability and reproducibility A 55° rhombic outline with a 1.6 mm corner radius and a 0° (negative) free angle provides a compromise between strength and versatility. The insert’s form gives robust support at the cutting edge, reduces vibration and helps maintain surface finish across varying depths of cut. With a clearly defined tolerance class M, dimensional consistency is ensured, simplifying fixture set‑up and repeatable results on CNC turning centres. Coating and substrate explained for process clarity This indexable insert uses a coated carbide substrate combined with the Tiger·tec Silver technology. The coating enhances resistance to abrasive wear and thermal loading while the substrate offers the toughness needed for interrupted cuts common in cast‑iron parts. For engineers less familiar with coatings: this means fewer premature edge failures and a more economical tool life when compared with uncoated grades in the same application. Practical integration into production and tooling systems Marked as DNMG150616-MK5, the insert fits standard DNMG holders and allows quick indexing to a fresh cutting edge. The MK5 chipbreaker promotes short, controllable chip forms, easing chip evacuation and reducing the risk of entanglement at the tool‑workpiece interface. Combined with consistent batch dimensions, the insert integrates smoothly into automated turning cycles and manual set‑ups alike, improving machine uptime and process reliability. For machining cast iron with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for tailored recommendations and cutting data: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150616-MK5-WKK10S-WALTER Designation: DNMG150616-MK5 WKK10S Product type: Turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK10S Measured data Plate size: 15 Plate thickness: 06 Free angle: 0° (negative) Corner radius: 1.6 mm Tolerance class: M Chipbreaker: MK5 Applications & features Suitable for: cast iron Coating: Tiger·tec Silver (coated carbide) Series description: WKK10S — optimised for abrasive wear on castings Shape: Rhombus 55° Execution: G FAQ Which materials is this insert intended for? The WKK10S grade is specifically optimised for machining cast iron, addressing its abrasive nature and the tendency to form short, breaking chips. What benefit does the MK5 chipbreaker provide? The MK5 chipbreaker produces short, controlled chips that simplify evacuation and reduce the risk of chip entanglement, improving process stability during turning operations. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating increases resistance to abrasive wear and thermal stress, which extends tool life and maintains cutting-edge integrity under demanding cast‑iron conditions. What does the designation DNMG150616-MK5 indicate? The code denotes the insert family and key dimensions: a DNMG (rhombic 55°) geometry, plate size 15, thickness code 06, corner radius 1.6, and the MK5 chipbreaker configuration. Is the insert suitable for standard indexable holders? Yes, the DNMG form factor conforms to common indexable insert holders for turning, enabling straightforward integration into existing tool‑holder systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
DNMG150616-MP5 WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP5 chipbreaker for reliable chip control and extended tool life; the proven negative 0° geometry and 1.6 mm corner radius deliver consistent turning performance in Stahl applications. Order directly via Metav Werkzeuge or request specific machining advice from our consultants for seamless integration into production. DNMG150616-MP5 WPP10G indexable turning insert — Tiger·tec Gold, for Stahl DNMG150616-MP5 WPP10G is a rhombic 55° indexable insert designed for general turning of Stahl under demanding production conditions Tiger·tec Gold coating for extended life MP5 chipbreaker for stable chip formation Rhombic 55° form with 1.6 mm corner radius Negative 0° rake for secure edge engagement Consistent productivity through optimised coating and grade The combination of a coated carbide grade and the Tiger·tec Gold technology provides elevated wear resistance and thermal stability during continuous turning of Stahl. This results in fewer tool changes and higher machine uptime, which directly supports cost-efficient production. The coating optimises the tribological behaviour at the cutting interface, while the substrate ensures toughness for varied operating parameters; both factors help to maintain dimensional accuracy over longer tool life. Precise chip control for reliable process security Equipped with the MP5 chipbreaker, the insert promotes controllable chip formation across a broad range of feeds and depths of cut. Stable chips reduce interruptions and the risk of surface damage, improving first-pass yield and reducing rework. The negative 0° rake geometry contributes to a predictable cutting force, which is particularly beneficial when machining interrupted cuts or harder batches of Stahl, giving operators and programmers greater confidence in process planning. Geometry that balances strength and accessibility The rhombic 55° shape with a 1.6 mm corner radius offers a balance between robust edge strength and accessibility in tight profiles. This geometry supports general-purpose turning tasks where a combination of edge durability and surface finish is required. For users less familiar with insert geometry: a larger corner radius increases edge support and resistance to chipping, whereas the 55° approach angle improves cutting engagement on shoulders and profiles. Designed for straightforward integration and repeatable results The DNMG format delivers a familiar mounting and indexing routine for most turning toolholders, while the WPP10G grade provides a predictable performance window for P (Stahl) applications. This facilitates process standardisation and easier tool management on the shop floor. Maintenance routines are simplified by the insert’s consistent wear pattern, which aids tool-life monitoring and reduces unexpected downtime. For application-specific recommendations or to request a tailored offer based on cutting data, contact Metav Werkzeuge — their specialists provide machining support and quick availability for production needs Technical data Article number: DNMG150616-MP5-WPP10G-WALTER Designation: DNMG150616-MP5 WPP10G Product type: Drehwendeschneidplatte Facts Corner radius: 1.6 mm Plate size: 15 Plate thickness: 06 Clearance / rake: 0° (negativ) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP5 Plate form: Rhombus 55° Application group: P (Stahl) FAQ What materials is this insert recommended for? The DNMG150616-MP5 WPP10G is formulated for Stahl (ISO group P) and is optimised for the heat and chip characteristics typical when turning steel. How does the Tiger·tec Gold treatment benefit machining? Tiger·tec Gold coating on the WPP10G grade increases wear resistance and thermal stability, which helps the insert maintain cutting edge integrity and extend service life under continuous production. Can this insert be used for interrupted cuts? Yes, the negative 0° rake geometry and the robust grade behaviour make the insert suitable for interrupted cutting conditions commonly encountered in turning operations. What is the function of the MP5 chipbreaker? The MP5 chipbreaker is designed to produce short, manageable chips across a range of feeds and depths, improving process security and reducing the risk of chip-related interruptions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is one of the world’s leading manufacturers of precision tooling for metalworking. Protected trademarks and trade names belong to their respective owners. Brand names and protected product designations are mentioned for explanation only. There is no affiliation between our company and the brands named. The offered item is an original, brand‑new product from the manufacturer.
DNMG150616-MP5 WPP20G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the MP5 chipbreaker for longer tool life and reliable chip control; ideal for efficient steel machining. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. DNMG150616-MP5 WPP20G indexable turning insert for steel — Walter Tools The DNMG150616-MP5 WPP20G is a rhombic 55° indexable turning insert designed for productive machining of steel components, offering robust edge stability and consistent chip formation. Tiger·tec Gold coating for high performance WPP20G grade optimised for steel machining MP5 chipbreaker for controlled chip formation Rhombic 55° form with 1.6 mm corner radius Consistent productivity through advanced coating technology The combination of Tiger·tec Gold surface treatment and the WPP20G grade provides measurable gains in process reliability. The coated cemented carbide substrate is geared towards typical heat and chip challenges in steel turning, enabling longer tool life and fewer indexings per workpiece. This translates into higher uptime and reduced tooling costs per part while maintaining dimensional stability under continuous cutting conditions. Geometry engineered for repeatable surface quality A rhombic 55° insert geometry with a 1.6 mm corner radius and 0° (negative) free angle delivers a balanced mix of strength and versatility. The larger corner radius increases edge robustness for medium-depth cuts, reducing edge chipping and improving surface finish consistency. The chosen form supports dependable results across a range of turning tasks where edge security and predictable tool behaviour are priorities. Controlled chip formation and material focus The MP5 chipbreaker is tailored for predictable chip segmentation when machining steel, supporting safe chip evacuation and reduced risk of built-up edge. As a grade designed for the P material group, the insert accommodates both unalloyed and alloyed steels, offering a universal compromise between wear resistance and toughness. For operations where consistent chip shape and process stability matter, this insert enhances machining safety and contributes to shorter cycle variability. For application advice or to secure DNMG150616-MP5 WPP20G inserts from Metav Werkzeuge, contact our sales team for tailored recommendations and delivery options Technical data Article number: DNMG150616-MP5-WPP20G-WALTER Designation: DNMG150616-MP5 WPP20G Manufacturer: Walter Tools Facts Plate size: 15 Corner radius: 1.6 mm Thickness: 06 Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: MP5 Form: Rhombic 55° Application material: Steel (P) Execution: G Series: Tiger-tec Gold FAQ Which materials is this insert suitable for? The DNMG150616-MP5 WPP20G (Walter Tools turning insert) is optimised for machining steel (ISO group P), including typical unalloyed and alloyed steels. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances wear resistance and thermal stability, contributing to longer tool life and more consistent performance under the heat loads typical of steel turning. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker promotes controlled chip formation and evacuation when cutting steel, reducing the likelihood of long, entangling chips and supporting safer, more stable operations. Is the geometry suitable for general-purpose turning? Yes; the rhombic 55° shape with a 1.6 mm corner radius provides a robust edge for medium-depth cuts while still offering good surface quality, making it suitable for a wide range of turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is used here for product identification only. The mentioned brand names and protected designations are referenced solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150616-MU5 WPP10G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold coating and the WPP10G grade for sustained tool life and consistent chip control in steel turning; order directly via Metav Werkzeuge or contact our consultants for machining recommendations. DNMG150616-MU5 WPP10G Drehwendeschneidplatte — Walter Tools — Tiger·tec Gold, for steel (ISO P) The DNMG150616-MU5 WPP10G is a negative-rake rhombic insert designed for stable, productive turning of steel under typical cutting conditions Tiger·tec Gold coating for high wear resistance WPP10G grade optimised for steel machining Rhombic 55° geometry with 1.6 mm corner radius MU5 chipbreaker for reliable chip control Reliable performance through advanced coating and grade The combination of the Tiger·tec Gold coating and the WPP10G carbide grade delivers predictable, long-lasting performance when machining steel. The coating reduces flank and crater wear, which translates into longer intervals between indexings and fewer tool changes, improving uptime. This technical pairing is particularly effective under the heat and chip-formation conditions typical for ISO P materials, offering a clear efficiency advantage for productive turning operations. Geometry and edge design that improve stability and finish The insert’s rhombic 55° geometry with a 1.6 mm corner radius and a 0° negative rake provides a balance between strength and accessibility in shoulder, profiling and general turning applications. A robust corner radius supports stable cutting forces and helps maintain dimensional accuracy, while the negative rake enhances edge resilience in interrupted cuts. The result is improved surface quality and reduced risk of chipping in routine production and occasional heavier cuts. Precise chip control and intended applications Equipped with the MU5 chipbreaker, the insert controls chip formation reliably across common steel grades, promoting safe evacuation and consistent tool contact. Classified for ISO P materials, the tool is suited to unalloyed and alloyed steels where typical heat generation and chip shapes occur. The chipbreaker geometry reduces secondary cutting and helps maintain constant cutting conditions, which benefits cycle-time stability and reduces manual chip-handling interventions. Contact Metav Werkzeuge for tailored cutting data and application support on Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for practical recommendations and availability Technical Data SKU: DNMG150616-MU5-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150616-MU5 WPP10G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Facts Geometry: Rhombus 55° Corner radius: 1.6 mm Clearance/rake: 0° (negative) Insert size: 15 Thickness: 06 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: MU5 Material suitability: Steel (ISO P) Application: Turning, general and semi-finish operations Cutting behaviour: Optimised for typical steel heat and chip formation FAQ What steels is this insert intended for? The DNMG150616-MU5 WPP10G is engineered for ISO P materials, meaning it is suitable for unalloyed and alloyed steels where standard cutting heat and chip formation occur. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating on this Walter Tools insert improves wear resistance and thermal stability, resulting in longer tool life and fewer indexings during extended production. Which chip conditions does the MU5 chipbreaker handle best? The MU5 chipbreaker is designed for consistent chip control in turning steel, producing short to moderate chip forms that evacuate reliably in standard turning setups. Is the insert suitable for interrupted cuts and heavier engagement? The negative 0° rake and 1.6 mm corner radius increase edge strength, making the insert more robust for occasional interrupted cuts and moderate heavy-duty turning. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
DNMG150616-MU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance and a stable edge geometry for consistent steel turning performance; the coated carbide grade ensures predictable tool life and efficient chip control. Order the insert directly through Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150616-MU5 WPP20G Indexable Turning Insert — Tiger·tec Gold, Walter Tools The DNMG150616-MU5 WPP20G is a robust indexable turning insert optimised for steel machining, featuring the Tiger·tec Gold coating and a MU5 chipbreaker for reliable chip control. Tiger·tec Gold coating for long tool life Optimised for steel machining ISO P Rhombic 55° insert with 1.6 mm corner radius Negative 0° rake for secure cutting action Reliable wear performance for steel turning The combination of the WPP20G grade and Tiger·tec Gold coating provides controlled wear progression under the thermal and mechanical loads typical of steel turning. As a coated carbide grade specifically tuned for the ISO P group, the insert supports stable cutting over extended tool life, reducing the frequency of index changes and the associated downtime. The coated carbide surface improves resistance to adhesion and abrasion, which helps to maintain dimensional stability and surface quality on workpieces made from unalloyed and alloyed steel. Geometry and edge design that stabilise productivity The insert’s Rhombic 55° geometry and 1.6 mm corner radius are designed to balance strength with accessibility in turning operations. The negative 0° rake provides a secure cutting action that minimises vibration in interrupted cuts and heavy roughing passes, while the MU5 chipbreaker promotes consistent chip formation and evacuation. Together these features support repeatable surface finishes and predictable tool behaviour, so machining parameters can be tuned for throughput without sacrificing component quality. Process benefits and practical advantages at the machine Using this grade reduces the need for frequent tool changes and contributes to a more economical machining cycle by extending interval times between indexing or regrinding. The insert’s tolerance class M and its standardised DNMG geometry ensure straightforward toolholder compatibility and reliable positioning in common turning tool systems. The practical result is enhanced planning certainty: stable cutting forces, improved surface integrity and fewer unexpected stoppages mean more efficient use of lathe time and a lower overall cost per part. Contact Metav Werkzeuge today to discuss how this Walter Tools DNMG150616-MU5 WPP20G insert can be integrated into production cycles or to request cutting parameter recommendations Technical data SKU: DNMG150616-MU5-WPP20G-WALTER Product designation: DNMG150616-MU5 Full designation: DNMG150616-MU5 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Corner radius: 1.6 mm Insert size: 15 Plate thickness: 06 Shape angle: 55° Free rake: 0° (negative) Tolerance class: M Design & features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: MU5 Material group: P (steel) Execution: G Classification: coated carbide ISO designation: DNMG150616-MU5 WPP20G FAQ What materials is this insert intended for? The DNMG150616-MU5 WPP20G insert is intended for the ISO P group, meaning it is optimised for machining various types of steel, including unalloyed and alloyed steels. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and thermal stability; in the WPP20G grade it helps to maintain edge integrity and extend service life during continuous steel turning. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions when machining steel with this insert. What does the negative 0° rake mean for cutting? A negative 0° rake offers a stronger cutting edge and increased resistance to edge chipping, which is beneficial for heavy cuts and intermittent machining with the DNMG150616-MU5 WPP20G. Is this insert compatible with standard DNMG toolholders? Yes, the DNMG geometry and tolerance class M ensure compatibility with common DNMG toolholder systems used in turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
DNMG150616-RP5 WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, reliable RP5 chip control and a compact Rhombus 55° geometry for consistent turning results; order the insert directly via Metav Werkzeuge or consult the technical team for machining recommendations. DNMG150616-RP5 WPP05G turning insert — Tiger‑tec Gold, for steel (Walter Tools) The DNMG150616-RP5 WPP05G is a Tiger‑tec Gold turning insert designed for efficient steel machining, featuring an RP5 chipbreaker and a 1.6 mm corner radius for stable cutting performance. Tiger‑tec Gold coated substrate Suitable for steel (P) machining Rhombus 55° geometry 1.6 mm corner radius RP5 chipbreaker for reliable chips Extended tool life through advanced coating The combination of the Tiger‑tec Gold coating and the WPP05G grade provides improved wear resistance and consistent edge strength. This coated carbide substrate reduces flank wear under typical steel cutting conditions, which leads to longer intervals between index changes and more predictable tool life. For production environments that balance productivity with longevity, the coated grade supports repeatable results and reduces downtime related to frequent insert changes. Stable chip formation and process security The integrated RP5 chipbreaker and the Rhombus 55° geometry ensure controlled chip formation during turning operations, promoting uninterrupted machining. With a negative 0° rake and optimised chip control, the indexable system reduces the risk of tangled chips and enhances process stability. This results in fewer interruptions on the shop floor and more consistent surface quality when turning steel components. Optimised for steel applications (ISO P) Engineered specifically for the ISO P material group, the insert excels when machining a wide range of steels — from less alloyed variants to tougher grades. The coated carbide composition is tuned to handle the typical heat and chip characteristics of steel, offering a reliable balance between toughness and wear resistance. Where modest finishing and general-purpose turning are required, this insert delivers repeatable dimensional results and good edge integrity. Practical benefits for workshop use With a 1.6 mm corner radius and a compact plate size, the indexable insert supports both dimensional stability and moderate radii requirements for turnings that demand robustness without sacrificing detail. The tolerance class M provides consistent fit in standard toolholders, simplifying insertion and replacement. For manufacturers seeking a dependable, economical option that integrates easily into existing turning setups, the insert offers straightforward handling and dependable performance. Choose Walter Tools' Tiger‑tec Gold WPP05G insert for reliable steel turning and contact Metav Werkzeuge for tailored cutting data or batch supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMG150616-RP5-WPP05G-WALTER Designation: DNMG150616-RP5 WPP05G Brand: Walter Tools Series: Tiger‑tec Gold Core data Plate form: Rhombus 55° Corner radius: 1.6 mm Negative rake: 0° Plate size: 15 Plate thickness: 06 Chipbreaker: RP5 Tolerance class: M Special features Grade: WPP05G (coated carbide) Suitable for: Steel (ISO P) Coating technology: Tiger‑tec Gold Stable chip formation via RP5 Designed for general turning and finishing FAQ What materials is the insert suitable for? The insert is specified for the ISO P material group and is suitable for machining a wide range of steel grades; the WPP05G grade is optimised for typical steel heat and chip behaviour. Which chipbreaker does the insert use and what is the benefit? This indexable insert features the RP5 chipbreaker, which promotes reliable chip control and reduces the likelihood of chip entanglement during continuous turning operations. What are the key geometric features affecting performance? Key geometry includes the Rhombus 55° plate form, 1.6 mm corner radius and negative 0° rake; these elements combine to offer edge strength, good contact conditions and predictable surface results. Is this insert a coated carbide grade and which series does it belong to? Yes, the insert is a coated carbide grade WPP05G and belongs to the Tiger‑tec Gold series, providing enhanced wear resistance in steel turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered article is an original, factory‑new product from the manufacturer.
DNMG150616-RP5 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent chip control and versatile geometry for efficient steel turning; order the insert directly via Metav Werkzeuge or request application advice from the consultants. DNMG150616-RP5 WPP10G turning insert, Tiger·tec Gold – for steel (Walter Tools) The DNMG150616-RP5 WPP10G is a rhombic 55° indexable turning insert with RP5 chipbreaker, optimised for reliable steel machining and consistent surface finish. Tiger·tec Gold coating for longer tool life RP5 chipbreaker for reliable chip control 1.6 mm corner radius for stable cutting Rhombic 55° geometry for versatile turning Outstanding productivity through consistent chip control The combination of the RP5 chipbreaker and the WPP10G grade delivers controlled chip formation during a wide range of turning operations on steel. The chipbreaker design reduces the risk of built-up edge and secures continuous material evacuation, which maintains cycle times and minimises unplanned interruptions. As a result, process stability is improved and tool changes become more predictable, supporting a smoother production flow. Coating technology that extends tool life Built on coated carbide, the insert is part of the Tiger·tec Gold series, a coating system engineered to withstand common wear mechanisms during steel machining. The multilayer coating promotes thermal stability at the cutting edge and reduces flank wear, which translates into longer cutting intervals and fewer replacements. For operations where consistent edge integrity matters, the coating contributes directly to lower tooling costs over time. Geometry and edge preparation for reliable performance The rhombic 55° platform and 1.6 mm corner radius provide a balanced edge that resists chipping while enabling robust engagement during turning passes. The 0° negative rake lends strength to the cutting edge under interrupted cuts and tough cross-sections. Together these geometric features enable dependable performance in medium to heavy stock removal and help maintain dimensional accuracy across extended tool life. Application focus and machining recommendations Designed primarily for P-group materials, the insert is suitable for unalloyed and alloyed steel, accommodating both steady finishing and general-purpose roughing tasks. The WPP10G grade is formulated for broad steel coverage with an emphasis on wear resistance; select cutting parameters that favour steady chip flow and moderate feeds to exploit the chipbreaker design. Where higher surface quality is required, modest reductions in feed combined with the insert’s geometry will enhance finish without sacrificing productivity. Discuss machining requirements with Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and secure optimal process results Technical data Article number: DNMG150616-RP5-WPP10G-WALTER Name: Drehwendeschneidplatte DNMG150616-RP5 WPP10G Walter Tools Series: Tiger·tec Gold Grade: WPP10G Manufacturer: Walter Tools Facts Plate size: 15 mm Corner radius: 1.6 mm Thickness: 06 Clearance / rake: 0° (negative) Special features Chipbreaker: RP5 Geometry: Rhombus 55° Coating: Tiger·tec Gold (coated carbide) Application: Steel (ISO P) Tolerance class: M FAQ What materials is this insert suitable for? The insert is formulated for ISO P materials and is suitable for machining unalloyed and alloyed steel; the DNMG150616-RP5 WPP10G from Walter Tools delivers targeted wear resistance for these applications. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes controlled chip formation and evacuation, reducing built-up edge and enhancing process stability when turning steel with the Tiger·tec Gold coated insert. What are the key geometric features to consider? The rhombic 55° shape and the 1.6 mm corner radius provide a robust cutting edge for both finishing and general-purpose turning, while the 0° negative rake increases edge strength for interrupted cuts. Is this insert suited to roughing and finishing operations? Yes; the combination of grade, coating and geometry allows the insert to be used across roughing and finishing tasks in steel machining with appropriate parameter adjustments. Protected trademarks and trade names remain the property of their respective owners. The Walter AG (brand: Walter Tools) is part of the Sandvik Group. Mention of brand names and trademarks is for explanation only; there is no affiliation between our company and the listed manufacturers. The offered item is original and factory-new. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG150616-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the robust RP5 chipformer for dependable steel machining and consistent tool life; secure ready-to-fit turning performance and ask Metav Werkzeuge for application advice or order support. DNMG150616-RP5 WPP20G turning insert, Tiger·tec Gold, for steel — Walter Tools DNMG150616-RP5 WPP20G is a coated carbide turning insert engineered for steel machining, featuring a Rhombic 55° geometry with a 1.6 mm nose radius for stable engagement. Tiger·tec Gold coated carbide For steel machining (ISO P) Rhombic 55° geometry, 1.6 mm nose radius RP5 chipformer for controlled chips Longer tool life through modern Tiger·tec Gold coating The coated carbide grade WPP20G in the Tiger·tec Gold series combines a wear-resistant substrate with a multi-layer coating that is optimised for the thermal and mechanical demands of steel machining. This results in improved edge stability and reliable performance under typical cutting temperatures. For production environments, the coating's resistance to abrasive wear reduces the need for frequent index changes, supporting continuous operation and efficient tool management. The insert's construction is designed to promote reproducible results across medium to high cutting parameters while maintaining surface finish quality. Geometry and chip control that enhance process security The Rhombic 55° shape and 1.6 mm nose radius provide a balance between strength and detail, allowing close-tolerance turning and consistent finishing operations. The integrated RP5 chipformer is configured for predictable chip segmentation when machining steels (ISO P), improving evacuation and reducing the risk of built-up edge formation. Together, geometry and chip control increase process stability, which contributes to fewer interruptions and a higher first-pass yield on turned components. Practical application guidance and support for machining steel This indexable insert is intended primarily for steel applications; the grade designation indicates optimised behaviour for typical steel heat generation and chip formation. For selection and parameter setting, consider the component material, rigidity of the setup and coolant strategy. Metav Werkzeuge can advise on cutting speeds, feeds and depth of cut to match the WPP20G grade to specific production goals. For complex workpieces or new applications, technical data and machining recommendations are available on request—contact information is listed below for straightforward consultation. Contact Metav Werkzeuge for tailored application advice on Walter Tools’ DNMG150616-RP5 WPP20G turning inserts and to discuss availability: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data SKU: DNMG150616-RP5-WPP20G-WALTER Article designation: DNMG150616-RP5 WPP20G Product type: turning insert Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Nose radius: 1.6 mm Geometry: Rhombic 55° Clearance angle: 0° (negative) Size code: 15 Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Gold Material class: coated carbide Chipformer: RP5 Suitability: Steel (ISO P) Execution: G FAQ What materials is this insert suited for? The DNMG150616-RP5 WPP20G insert is specified for steel machining (ISO P) and the Walter Tools grade WPP20G is optimised for typical steel chip formation. How does the RP5 chipformer affect machining? The RP5 chipformer on this turning insert promotes controlled chip segmentation and evacuation when turning steel, helping to maintain a stable cutting process with fewer interruptions. What benefits does Tiger·tec Gold provide compared with standard coatings? Tiger·tec Gold on the WPP20G grade offers enhanced wear resistance and edge stability for steel turning, supporting longer tool life and consistent surface quality over production runs. Is the Rhombic 55° geometry suitable for finishing operations? Yes, the Rhombic 55° form with a 1.6 mm nose radius is designed to deliver reliable finishing capability while preserving strength at the cutting edge for repeatable results. Where can application data and cutting parameters be obtained? Application recommendations for the DNMG150616-RP5 WPP20G and suggested cutting parameters are available through Metav Werkzeuge; technical consultation is advised for new setups or critical components. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the trademark holders. The listed article is an original, factory-new product of the stated manufacturer.
DNMG150616-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP30G grade and the RP5 chipbreaker for consistently productive steel turning; order the insert through Metav Werkzeuge or consult their technical team for application support. DNMG150616-RP5 WPP30G indexable turning insert — RP5 chipbreaker, Tiger·tec Gold coating, Walter Tools The DNMG150616-RP5 WPP30G is a rhombic 55° coated carbide insert designed for reliable steel turning in general turning and finishing applications, featuring a robust 1.6 mm corner radius. *Tiger·tec Gold coating for extended tool life *RP5 chipbreaker for stable chip control *Rhombic 55° geometry with 1.6 mm radius *Designed for steel turning (ISO P) applications Maximise productivity with advanced grade and coating The combination of the WPP30G grade and the Tiger·tec Gold coating provides a clear performance advantage when machining steels (ISO P). The coated carbide composition balances wear resistance and toughness, allowing for higher cutting speeds and longer intervals between index changes. In practical terms, this means fewer tool changes per shift and a steadier production flow, which supports tangible efficiency improvements on serial turning operations. Consistent chip control for improved surface quality Equipped with the RP5 chipbreaker and a negative 0° relief geometry, this insert promotes predictable chip formation under a range of cutting conditions. The chipbreaker design channels chips away from the cutting edge, reducing the risk of built-up edge and keeping the contact zone clear. The result is a more consistent surface finish and reduced need for secondary finishing, which contributes to lower rework rates and quieter, safer machining cycles. Robust geometry for versatile turning tasks The rhombic 55° shape and 1.6 mm corner radius deliver a reliable cutting edge with good edge strength and repeatable performance on interrupted cuts. The insert’s 15 mm size and thickness code 06 align with common toolholder standards for DNMG-type inserts, so integration into existing tool setups is straightforward. This geometry supports both medium-depth roughing and stable finishing passes, offering a practical balance between edge life and part quality. Practical application and selection guidance Selected for its suitability for steel, the WPP30G grade demonstrates particular strength on unalloyed and alloyed steels where controlled heat and chip formation are critical. For operations requiring higher toughness—such as intermittent cuts—or where process security is paramount, the coated grade and RP5 chipbreaker provide dependable performance. For advice on cutting data or compatibility with specific toolholders, Metav Werkzeuge’s technical consultants can supply tailored recommendations and cutting-parameter tables. Contact Metav Werkzeuge for a production-oriented selection of the DNMG150616-RP5 WPP30G insert and receive specific advice on cutting data, stock availability and integration into existing turning processes Technical data SKU: DNMG150616-RP5-WPP30G-WALTER Product: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP30G Chipbreaker: RP5 Facts Size: 15 mm Corner radius: 1.6 mm Relief angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Gold Material class: coated carbide Geometry: Rhombic 55° Application group: Steel (ISO P) Design: negative insert for robust cutting performance Series description: balance of wear resistance and toughness FAQ What materials is this insert suitable for? The DNMG150616-RP5 WPP30G insert is formulated for machining steels (ISO P); the WPP30G grade is optimised for the thermal and chip-formation characteristics typical of steel turning. How does the RP5 chipbreaker improve machining? The RP5 chipbreaker on this Walter Tools insert promotes controlled chip flow and reduces built-up edge, leading to a steadier surface finish and fewer interruptions in the machining cycle. What does the 0° (negative) relief angle mean in practice? A 0° negative relief indicates a robust cutting geometry that increases edge strength and resistance to chipping, making the insert well suited to interrupted cuts and heavier engagements. Can this insert be used for finishing and roughing? Yes; the rhombic 55° geometry combined with a 1.6 mm corner radius provides a compromise between strength and surface quality, so it can be used for both medium roughing and stable finishing passes. Is this an original Walter Tools product? This article is an original factory-new product from Walter Tools and is part of the Tiger·tec Gold series, produced for reliable and repeatable turning performance. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered article is an original factory-new product of the manufacturer.
DNMM150608-HU3 WPP10G HU3 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the HU3 chipbreaker to secure longer tool life and predictable chip control in Stahl turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for process optimisation. DNMM150608-HU3 WPP10G — Turning insert (Tiger‑tec Gold, HU3) by Walter Tools A DNMM150608-HU3 WPP10G turning insert designed for stable, productive turning of Stahl with a Tiger‑tec Gold coated grade and a HU3 chipbreaker for reliable chip formation Tiger‑tec Gold coating for extended tool life WPP10G grade – optimised for Stahl machining HU3 chipbreaker for controlled chip formation Longer tool life through a performance coating The combination of the Tiger‑tec Gold coating and a WPP10G coated‑carbide grade delivers measurable wear resistance and repeatable performance in continuous turning tasks. The coating system reduces flank wear and maintains the cutting edge at higher temperatures, which translates into fewer index changes and improved uptime. For operations where sustained productivity matters, this coated chemistry supports better edge stability and a predictable service interval, reducing the frequency of tool handling and increasing overall process efficiency. Consistent chips and surface quality from optimised geometry With the integrated HU3 chipbreaker and a 0.8 mm corner radius, the insert offers controlled chip segmentation and stable cutting forces, which contribute directly to a consistent surface finish. The Rhombus 55° shape with a 0° (negative) relief angle provides robust edge support for interrupted cuts and heavy depths of cut. The chip control geometry channels swarf reliably away from the workpiece, lowering the risk of rework and minimising machine downtime related to chip management—an important factor for high‑volume turning of Stahl components. Process reliability and uncomplicated integration The insert’s designation and tolerance class M make it suitable for a wide variety of shopfloor setups and clamping systems; dimensional data such as the 15 insert size and the thickness code 06 match common toolholders for turning applications. Compatibility with standard tool bodies and the clear marking of grade and chipbreaker reduce setup time and inspection complexity. Selection of this insert supports a straightforward machining strategy: stable cutting edge, reliable chip control and easy interchangeability in established tool systems, all contributing to repeatable part quality and efficient production cycles. Order Walter Tools Tiger‑tec Gold inserts through Metav Werkzeuge for reliable Stahl turning and consult Metav Werkzeuge’s technical team for application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMM150608-HU3-WPP10G-WALTER Designation: DNMM150608-HU3 Grade: WPP10G Series: Tiger‑tec Gold Product type: Turning insert Facts Insert size: 15 Thickness code: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape angle: 55° Special features Chipbreaker: HU3 Coating: Tiger‑tec Gold Grade material: coated carbide Suitable for: Stahl Tolerance class: M FAQ What materials is this insert designed for? The DNMM150608-HU3 WPP10G is specified for machining Stahl, with the WPP10G grade optimised for typical steel heat and chip formation behaviour. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP10G grade improves wear resistance and edge stability, extending tool life and reducing index changes for Walter Tools turning inserts. Which chip behaviour can be expected with the HU3 chipbreaker? The HU3 chipbreaker produces segmented chips and stable cutting conditions, supporting reliable chip evacuation and a consistent surface finish during turning operations. Is the insert compatible with standard toolholders? The DNMM150608-HU3 insert follows common dimensional codes (size 15, thickness code 06) and tolerance class M, allowing straightforward fitment in many standard turning toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
DNMM150608-HU3 WPP20G HU3 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP20G grade and a precise HU3 chipbreaker for reliable steel turning and consistent component quality; the rhombic 55° geometry with a 0.8 mm corner radius ensures repeatable cutting performance. Order the DNMM150608-HU3 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. DNMM150608-HU3 WPP20G — Turning indexable insert with Tiger·tec Gold for steel — Walter Tools The DNMM150608-HU3 WPP20G is a rhombic 55° turning insert designed for steel machining, combining a Tiger·tec Gold coated carbide grade with an HU3 chipbreaker for stable chip control and durable cutting edges. Tiger·tec Gold coating technology Optimised HU3 chipbreaker for steel Rhombus 55° with 0.8 mm corner radius 0° negative rake for stable cutting Consistent productivity through a tailored grade The coating and substrate combination delivers predictable wear behaviour under the thermal and mechanical loads typical of machining steels. The WPP20G grade is a Walter Tools coated carbide formulation developed for ISO group P (steel), balancing wear resistance and toughness to extend tool life while maintaining surface integrity. By reducing flank wear and supporting stable chip formation, the insert enables higher material removal rates without compromising dimensional accuracy, which leads to measurable improvements in process efficiency. Geometry that stabilises cutting conditions A rhombic 55° profile with a 0.8 mm corner radius and 0° negative rake provides a robust cutting edge for both light finishing and more demanding operations. The HU3 chipbreaker is designed for steel cutting, promoting short, controllable chips that evacuate reliably. The combination of these features reduces vibration and tool deflection, leading to improved surface finish and repeatability across serial production — especially important in medium-duty turning where process stability determines part conformity. Clear specifications for fast tool selection and setup The insert designation DNMM150608-HU3 and the tolerance class M make it straightforward to match holders and set cutting parameters. The 06 thickness code and 15 plate size are compatible with a wide range of toolholders, simplifying inventory management. As a coated carbide insert for steel, it is suitable for common unalloyed and alloyed steels encountered in general turning tasks and helps to reduce setup iterations thanks to its predictable behaviour under standard coolant and cutting conditions. Practical outcomes for workshop performance Using this insert supports a pragmatic approach to productivity: improved tool life through the Tiger·tec Gold coating, efficient chip control from the HU3 breaker and consistent edge integrity due to the rhombic geometry. The result is fewer tool changes, steadier cycle times and lower overall machining costs per part. For teams seeking dependable performance on steel turning operations, this insert offers a combination of stability, surface quality and straightforward application that delivers tangible production benefits. For application advice or to secure DNMM150608-HU3 WPP20G inserts from Walter Tools, contact Metav Werkzeuge for tailored recommendations and order coordination — Metav Werkzeuge, Parkring 45, 46446 Emmerich; info@metav-werkzeuge.com Technical data SKU: DNMM150608-HU3-WPP20G-WALTER Product type: Turning indexable insert Designation: DNMM150608-HU3 WPP20G Manufacturer: Walter Tools Numbers / Core technical data Insert size: 15 Thickness code: 06 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: HU3 Shape: Rhombus 55° Material application: Steel (ISO P) FAQ Which materials is this insert intended for? This insert is specified for ISO group P (steel) materials; the WPP20G grade and the HU3 chipbreaker are optimised for unalloyed and alloyed steels. What geometry and chip control features does it offer? The rhombic 55° shape, 0.8 mm corner radius and HU3 chipbreaker deliver controllable short chips and stable cutting forces for consistent surface finish. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating increases wear resistance and thermal stability, supporting longer tool life and improved process security when turning steel. Is the DNMM150608-HU3 suitable for finishing and semi-finishing operations? Yes; the combination of geometry and grade provides a balance of strength and edge sharpness suitable for both semi-finish and finishing passes in steel turning. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods from the manufacturer.
DNMM150608-HU3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant coating, dedicated chip control and stable negative geometry to ensure reliable turning performance in steel machining; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and holder recommendations. DNMM150608-HU3 WPP30G — Turning indexable insert, Tiger·tec Gold (Steel) — Walter Tools The DNMM150608-HU3 WPP30G is a coated carbide turning insert designed for general steel turning, offering stable edge life and controlled chip formation for productive machining. Tiger·tec Gold coating for extended tool life Optimised chipbreaker HU3 for consistent chips Rhombic 55° geometry for versatile turning Negative 0° rake for high process stability Maximise productivity with a wear-resistant grade The DNMM150608-HU3 WPP30G insert combines the Tiger·tec Gold coating and the WPP30G grade to provide a balance of wear resistance and toughness optimised for steel machining. The coating reduces flank and crater wear under typical turning temperatures, so the cutting edge retains its geometry for longer. This results in fewer insert changes, predictable tool-life cycles and more consistent component quality in continuous production runs. Geometry that ensures stable cutting and surface finish The rhombic 55° shape and negative 0° rake deliver high cutting stability and reduced vibration when machining medium and high-strength steels. The 0.8 mm corner radius helps to distribute cutting forces and supports a reliable surface finish without aggressive edge chipping. For operations that prioritise dimensional repeatability and chatter suppression, the insert geometry provides a dependable base for optimised feeds and depths of cut. Controlled chip formation for safe, efficient turning The HU3 chipbreaker is tuned to produce repeatable, manageable chips in the P material group defined by ISO 513. Good chip control reduces the risk of entanglement and improves evacuation from the cutting zone, particularly on parts with varying cross-sections. Where process stability and predictable coolant interaction matter, the combination of grade and chipbreaker reduces interruptions and supports higher effective machining rates. Practical dimensions and handling for shop-floor integration With a nominal size of 15 mm and plate thickness 06, this rhombic insert fits a wide range of standard toolholders for turning operations. The negative seating and tolerance class M assist in consistent clamping and repeatable indexing, simplifying tool change routines. For selection of suitable holders and cutting parameters adapted to specific batch sizes or materials, Metav Werkzeuge can provide tailored recommendations and cutting data sheets to accelerate setup and minimise trial runs. Contact Metav Werkzeuge today for application-specific cutting data and holder recommendations for Walter Tools Tiger·tec Gold turning inserts Technical Data Article number: DNMM150608-HU3-WPP30G-WALTER Name/Designation: DNMM150608-HU3 WPP30G Manufacturer: Walter Tools Series/Grade: Tiger·tec Gold / WPP30G Core technical data Insert size: 15 mm Thickness: 06 Corner radius: 0.8 mm Geometry: Rhombic 55° Rake angle: 0° (negative) Chipbreaker: HU3 Tolerance class: M Execution: M Materials & special features Coating: Tiger·tec Gold Grade type: WPP30G (coated carbide) Suitable for: Steel (ISO P group) Designed for: Stable chip formation and productive turning Series benefits: Wear resistance and broad workpiece coverage FAQ What materials is this insert suitable for? The WPP30G grade is formulated for steel (ISO P group); the DNMM150608-HU3 insert performs reliably on unalloyed and alloyed steels. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating increases wear resistance and reduces flank wear, which extends edge life and leads to more consistent tool-life intervals. What advantages does the HU3 chipbreaker provide? The HU3 chipbreaker produces consistent, controllable chips, improving evacuation and reducing interruptions in continuous turning operations. Is the insert compatible with standard toolholders? The rhombic 55° form and the 15 mm size with thickness 06 match common turning toolholders; check clamping compatibility and tolerance class M for exact fit. Where can cutting data and holder recommendations be obtained? Metav Werkzeuge can supply application-specific cutting parameters and holder suggestions for the Walter Tools Tiger·tec Gold inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original factory-new product of the manufacturer.
DNMM150608-HU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, robust negative‑rake geometry and a proven HU5 chipbreaker for stable, productive steel turning; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. DNMM150608-HU5 WPP20G Turning insert — for steel, Tiger‑tec Gold, Walter Tools A DNMM150608-HU5 WPP20G turning insert for steel turning, offering a Tiger‑tec Gold coated carbide grade and a robust negative 0° rake for reliable chip control and long tool life Tiger‑tec Gold coating For steel (ISO P) applications Rhombic 55° geometry 0.8 mm corner radius 0° negative rake for robustness Higher productivity through a coated grade optimised for steel The WPP20G grade, part of the Tiger‑tec Gold family, is a coated carbide formulation designed for the thermal and chip‑formation behaviour typical of steel machining. As a result, the insert delivers consistent edge life and predictable wear progression, which reduces unplanned tool changes and supports continuous production. The combination of coating technology and geometry enables productive cutting rates while maintaining dimensional stability on medium to high alloyed steels. Robust geometry and reproducible accuracy in turning The rhombic 55° insert form with a 0.8 mm corner radius provides a balance between strength and finishing capability: the corner radius improves edge stability for interrupted cuts and heavy engagement, while still allowing for acceptable surface quality in finishing passes. The 0° negative rake increases mechanical toughness of the cutting edge, making the insert particularly suitable where rigidity and repeatable results are required rather than minimising cutting forces. Practical chip control and easy identification on the shop floor Equipped with the HU5 chipbreaker, this insert promotes short, controllable chip shapes when turning steels, reducing scrap risks and easing chip handling in automated cells. The standardised designation and series marking simplify tool management and reordering; the insert is supplied in the widely used DNMM configuration, enabling fast replacement and predictable performance across batch production. For process validation, the insert supports straightforward tool‑setting and repeatable offsets on conventional and CNC lathes. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Gold inserts and application parameters; Metav Werkzeuge can advise on grade selection and cutting strategies Technical data Article number: DNMM150608-HU5-WPP20G-WALTER Name / label: Drehwendeschneidplatte DNMM150608-HU5 WPP20G Walter Tools Product type: Drehwendeschneidplatte / Turning insert Designation without sort: DNMM150608-HU5 ISO designation: DNMM150608-HU5 WPP20G Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: HU5 Geometry: Rhombic 55° Corner radius: 0.8 Rake: 0° (negativ) Plate size: 15 Plate thickness: 06 Material group: P Tolerance class: M Execution: M Manufacturer: Walter Tools Numbers / Core technical data Corner radius: 0.8 mm Plate size: 15 Thickness code: 06 Rake angle: 0° Geometry angle: 55° Special features / Versions Tiger‑tec Gold coated carbide Grade optimised for steel (ISO P) HU5 chipbreaker for controlled chips Rhombic 55° form for versatile turning 0° negative rake for increased edge toughness Tolerance class M for dimensional consistency FAQ What materials is this insert designed for? This DNMM150608-HU5 WPP20G insert from Walter Tools is formulated primarily for steel (ISO P) machining, covering unalloyed and alloyed steels as indicated by the WPP20G grade. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP20G grade enhances wear resistance and heat management during turning of steel, resulting in more consistent tool life and fewer interruptions to production. Which chipbreaker is fitted and what are the benefits? The insert features the HU5 chipbreaker, designed to produce controlled, short chips in steel turning, improving safety and reducing chip management effort in automated or manual operations. Is the insert suitable for interrupted cuts or heavy engagement? Yes, the rhombic 55° form combined with a 0.8 mm corner radius and 0° negative rake provides increased edge strength, making it suitable for interrupted cuts and applications requiring robust performance. How can the DNMM150608-HU5 WPP20G be identified for reordering? Reorder using the SKU DNMM150608-HU5-WPP20G-WALTER or the ISO designation DNMM150608-HU5 WPP20G; both identify the Tiger‑tec Gold grade and HU5 chipbreaker configuration. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is a leading global manufacturer of precision engineering tools and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanatory purposes. The offered item is an original, factory‑new product of the manufacturer.
DNMM150612-HU3 WPP10G Wendeplatten - Walter Tools
Take advantage of a robust Tiger·tec Gold cutting grade and the HU3 chipbreaker in a compact rhombic geometry to achieve reliable, high-productivity turning of steel; the 1.2 mm corner radius and 0° negative clearance enhance edge security and process stability. Order the DNMM150612-HU3 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. DNMM150612-HU3 WPP10G – Turning indexable insert, Tiger·tec Gold coating, Rhombic 55° (Walter Tools) The DNMM150612-HU3 WPP10G is a rhombic 55° turning insert designed for efficient machining of steel; the Tiger·tec Gold coating and HU3 chipbreaker ensure consistent chip control and extended tool life in demanding production environments Tiger·tec Gold coating WPP10G Rhombic 55° geometry for versatile turning 0° negative clearance for robust cutting Corner radius 1.2 mm for consistent edge strength Enhanced productivity through an advanced coating and grade The Tiger·tec Gold WPP10G grade combines a wear-resistant coated carbide substrate with a microstructure tuned for the thermal and mechanical demands of steel machining. This results in improved tool life and fewer insert changes during high-volume turning operations, supporting a more continuous production flow. In practice, the coating reduces flank and crater wear while the substrate maintains edge stability under cyclic loading. For operators seeking predictable performance on unalloyed and alloyed steel, this combination delivers measurable efficiency gains and reduced process variability. Secure cutting performance from geometry and edge preparation The rhombic 55° shape paired with a 1.2 mm corner radius provides a balance between strength and reachable surface finish. A larger corner radius increases edge security against chipping, which is particularly advantageous for interrupted cuts or when feed rates vary. The insert’s 0° negative clearance enhances robustness by presenting a stronger cutting edge orientation under heavy depths of cut, making the component well suited to medium to heavy turning applications where consistent dimensional accuracy and repeatability are required. Reliable chip control and application focus for steel machining The integrated HU3 chipbreaker is optimised for steel applications (material group P) and supports stable chip evacuation across common cutting regimes. Good chip control reduces the risk of long stringy chips, improves surface finish potential, and lowers the likelihood of rework or machine stoppages. As part of the Tiger·tec Gold series, the insert is intended for universal use on many steel grades, offering a productive compromise between wear resistance and toughness to suit general turning tasks in jobbing and serial production alike. For application-specific advice, inserts supply or to discuss suitable grades for a given steel alloy, contact Metav Werkzeuge for expert recommendations and fast delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMM150612-HU3-WPP10G-WALTER Designation: DNMM150612-HU3 Product type: Turning indexable insert Brand: Walter Tools Facts Geometry: Rhombic 55° Corner radius: 1.2 mm Size: 15 (dimension as specified) Thickness: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Coating / grade: WPP10G (Tiger·tec Gold) Chipbreaker: HU3 Suitable material group: Steel (P) Series: Tiger·tec Gold Substrate: Coated carbide FAQ What materials is this insert intended for? The DNMM150612-HU3 WPP10G is specified for machining steel (ISO group P); the Tiger·tec Gold grade and HU3 chipbreaker are optimised for the thermal and chip-formation characteristics of steel. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and resistance to chipping, which helps maintain dimensional consistency and prolongs insert life under medium to heavy turning loads. What benefits does the HU3 chipbreaker provide? The HU3 chipbreaker offers controlled chip formation for steel, aiding safe chip evacuation and improving surface finish while reducing the chance of entangled or stringy chips. Is the insert suitable for interrupted cuts? Yes; the combination of the rhombic 55° geometry, 0° negative clearance and the 1.2 mm corner radius gives the insert the robustness required for many interrupted-cut scenarios. Can this insert be used for finishing and medium turning? The geometry and grade offer a versatile compromise: capable of achieving good finishes in medium turning while still providing the strength needed for more demanding operations. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods of the manufacturer (Walter Tools). Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMM150612-HU3 WPP20G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the HU3 chipbreaker delivers long tool life and reliable chip control for steel machining; the robust rhombic geometry and 1.2 mm corner radius ensure stable, repeatable turning results. Order the DNMM150612-HU3 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. DNMM150612-HU3 WPP20G indexable turning insert, Tiger·tec Gold, for steel — Walter Tools The DNMM150612-HU3 WPP20G is a coated indexable turning insert designed for stable, productive steel machining in general turning applications, combining a Tiger·tec Gold grade with an HU3 chipformer for predictable chip control. Tiger·tec Gold coating for long tool life Optimised HU3 chipbreaker for steel turning Rhombic 55° geometry with 1.2 mm corner radius 0° negative rake angle for stable cutting Consistent cutting performance through premium grade and chip control The combination of the WPP20G grade and Tiger·tec Gold coating provides a balance of wear resistance and toughness that suits a wide range of steel turning tasks. Designed as a coated carbide insert, it reduces flank wear and prolongs useful tool life under the thermal loads typical of steel machining. The integrated HU3 chipbreaker is tailored for predictable chip formation, which simplifies chip evacuation and lowers the risk of re-cutting or surface damage. Translating coating and grade into operational advantage, the result is fewer tool changes and more consistent cycle times on serial production runs. Geometry and edge design for repeatable surface quality The insert’s rhombic 55° shape and the 1.2 mm corner radius deliver a reliable edge for turning operations that require dimensional stability. The 0° negative rake angle offers a more robust cutting edge under interrupted cuts or heavy cross-sections, improving resistance to mechanical shock. These geometric choices support a controlled cutting action that helps maintain tolerances and surface finish across batches. The insert thickness code and flat seat size ensure compatibility with standard DNMM toolholders for quick indexing and secure clamping. Process security and economic machining for workshops Using an insert from the Tiger·tec Gold series reduces downtime through extended edge life while maintaining consistent performance across different steel grades. The WPP20G sortation is engineered for steel (ISO group P), providing broad applicability from general-purpose turning to more demanding finishing passes. By improving tool life and maintaining stable chip formation, the insert supports higher productivity and lower per-component tooling cost, making it suitable for small to medium batch production as well as continuous operations. For application-specific setup or feed and speed recommendations, technical guidance is available to align the insert’s performance with individual machining strategies. Contact Metav Werkzeuge for selection advice and to discuss how Walter Tools Tiger·tec Gold inserts like the DNMM150612-HU3 WPP20G can improve process stability and productivity Technical data SKU: DNMM150612-HU3-WPP20G-WALTER Article designation: DNMM150612-HU3 WPP20G Manufacturer: Walter Tools Product type: indexable turning insert Core data Plate size: 15 mm Corner radius: 1.2 mm Free rake angle: 0° Thickness code: 06 Tolerance class: M Special features Tiger·tec Gold series Grade: WPP20G Coated carbide Chipbreaker: HU3 Shape: Rhombic 55° Material application: steel (ISO P) Execution: M (tolerance/finish) FAQ What steel applications is this insert suitable for? The DNMM150612-HU3 WPP20G insert is optimised for ISO group P materials, covering a broad range of unalloyed and alloyed steels where controlled chip formation and wear resistance are required. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold on the WPP20G grade increases abrasion resistance and heat tolerance, which extends edge life and supports consistent performance during longer production cycles with the DNMM150612-HU3. Which chipbreaker is fitted and what does it do? The HU3 chipbreaker is integrated to promote reliable chip control in steel turning; it helps form short, manageable chips and reduces the chance of entanglement or surface damage. Is the insert compatible with standard DNMM toolholders? Yes, the DNMM150612-HU3 format follows standard DNMM seating and clamping dimensions; verify holder compatibility with the plate size and thickness code before use. What advantages does the 0° negative rake offer? The 0° negative rake provides a stronger cutting edge, improving resistance to mechanical shock and making the insert suitable for interrupted cuts or heavier turning passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names are used for explanation purposes only and do not imply any affiliation with our company. The offered article is an original, factory-new product of the manufacturer.
DNMM150612-HU3 WPP30G HU3 Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the WPP30G grade provides a durable, balanced cutting edge for efficient steel turning; the HU3 chipbreaker and a 1.2 mm corner radius ensure predictable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult their advisors for tailored cutting data. DNMM150612-HU3 WPP30G turning indexable insert – Tiger·tec Gold, HU3 chipbreaker (Walter Tools) A DNMM150612-HU3 WPP30G turning insert engineered for robust steel machining, offering coated-carbide wear resistance and a stable chipbreaker for reliable production runs Tiger·tec Gold coating for longer life HU3 chipbreaker for consistent chip control Rhombic 55° shape for versatile turning Corner radius 1.2 mm for robust cutting edge Proven process stability from coating and grade The combination of Tiger·tec Gold technology and the WPP30G coated carbide grade delivers a clear advantage in repeatability and tool life when turning Stahl. The multilayer coating improves resistance to abrasive wear while maintaining edge toughness, which translates into fewer tool changes and more predictable cycle times. For operations seeking consistent part quality, this insert reduces variation in tool performance over a work shift. Predictable chips and surface finish in interrupted cuts The HU3 chipbreaker is designed to produce controlled chip forms under typical steel cutting conditions. With a 0° (negative) rake and a Rhombus 55° geometry, the insert provides a stable contact zone that minimises vibration and supports a better surface finish. The 1.2 mm corner radius increases edge strength for interrupted cuts, lowering the risk of edge chipping and improving process reliability. Productivity benefits and economical machining Balanced between wear resistance and toughness, this grade is suited to the thermal and mechanical demands of steel machining. The coated-carbide construction supports higher cutting speeds and longer tool life, so machining operations can expect fewer tool changes and improved uptime. These gains produce measurable cost benefits in medium- to high-volume turning applications where tool-change time and machine occupancy matter. Easy integration and specification clarity The insert format DNMM150612-HU3 follows standard indexable insert conventions and is supplied in tolerance class M, enabling straightforward replacement and set-up in compatible toolholders. The geometry and chipbreaker are chosen for general turning on Stahl; cutting data should be adapted to material grade and machining conditions. For tailored recommendations, consider the provided Chipbreaker and geometry data when programming cutting speeds and feeds. Contact Metav Werkzeuge for cutting-parameter presets and application advice, or request specific data via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 to integrate this Tiger·tec Gold DNMM150612-HU3 WPP30G insert into production workflows Technical Data SKU: DNMM150612-HU3-WPP30G-WALTER Article designation: DNMM150612-HU3 WPP30G Product type: Drehwendeschneidplatte (turning indexable insert) Series: Tiger·tec Gold Grade / Sort: WPP30G Execution: M Chipbreaker: HU3 Geometry: Rhombus 55° Free angle: 0° (negative) Corner radius: 1.2 Plate size: 15 Plate thickness: 06 Material code: P Tolerance class: M Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Plate size: 15 (format designation) Free angle: 0° (negative) Tolerance class: M Thickness designation: 06 Special features Tiger·tec Gold coating technology Coated carbide grade WPP30G HU3 chipbreaker for controlled chips Rhombic 55° insert shape Optimised for turning of Stahl (ISO 513) FAQ Which materials is this insert suitable for? The DNMM150612-HU3 WPP30G insert from Walter Tools is engineered primarily for machining Stahl as defined by ISO 513 and offers a balance of wear resistance and toughness for a broad range of unalloyed and alloy steels. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating increases abrasive wear resistance and helps maintain a sharp cutting edge under elevated temperatures, allowing the insert to sustain productive cutting speeds with improved life compared with uncoated grades. What are the benefits of the HU3 chipbreaker? The HU3 chipbreaker promotes consistent chip formation during turning of steel, reducing the risk of long, stringy chips and aiding reliable evacuation. This supports continuous operations and lowers the chance of surface damage. Is the DNMM150612-HU3 compatible with standard toolholders? Yes. The DNMM150612-HU3 format adheres to common indexable insert conventions and its tolerance class M facilitates replacement in compatible toolholders designed for Rhombus 55° inserts. Can this insert be used for interrupted cutting? The 1.2 mm corner radius and negative free angle make the insert resilient under intermittent engagement, providing a robust cutting edge for interrupted turning applications on Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and product names belong to their respective owners; they are mentioned solely for clarification. The offered article is an original, factory-new product of the manufacturer.
DNMM150612-HU5 WMP20S WMP20S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating and the HU5 chipbreaker for robust stainless steel turning; reliable chip control and a 1.2 mm corner radius ensure consistent part quality — order the insert directly via Metav Werkzeuge or consult our technical advisors. DNMM150612-HU5 WMP20S turning insert – WMP20S grade, for stainless steel (Walter Tools) DNMM150612-HU5 WMP20S is a precision turning insert designed for demanding stainless steel applications, offering the Tiger‑tec Silver coating and an HU5 chipbreaker for stable, repeatable performance Tiger‑tec Silver coating for extended tool life Optimised HU5 chipbreaker for stainless steel Rhombus 55° form with 1.2 mm corner radius Negative rake 0° for stable cutting edge Longer tool life and reliable chip formation for stainless steel The combination of the Tiger‑tec Silver coating with the WMP20S grade provides a balanced resistance to wear and thermal stress that is particularly beneficial for machining stainless steel. The advanced coating chemistry promotes stable chip formation, reducing the risk of built‑up edge and improving productivity in medium to robust cutting conditions. This results in fewer tool changes, less downtime and a more predictable process for series production. Geometry engineered for consistent surface finish and productivity The rhombus 55° insert geometry with a 1.2 mm corner radius and a 0° (negative) rake angle delivers a compromise between cutting strength and finish quality. The acute cutting angle is suited to finishing and semi‑finishing passes, while the defined corner radius helps maintain dimensional stability on external profiles. Combined with the HU5 chipbreaker, the geometry supports controlled chip evacuation and reduced vibration, translating into better surface integrity and longer tool life. Process security and shopfloor practicality Designed under the Walter Tools Tiger‑tec Silver series, this turning insert emphasises process security and repeatability in daily production. The HU5 chipbreaker is tuned for the characteristics of stainless alloys, helping to avoid stringy chips and ensuring safer, more efficient operation. Compatibility with common indexable toolholders and standard turning tool systems simplifies inventory and tool planning, making the insert a practical choice for engineering and manufacturing shops seeking reproducible results. Contact Metav Werkzeuge for tailored application advice and to request a quote for the DNMM150612-HU5 WMP20S turning insert — our specialists will recommend the optimal machining parameters and supply options Technical data SKU: DNMM150612-HU5-WMP20S-WALTER Article: DNMM150612-HU5 WMP20S Manufacturer: Walter Tools Product type: Turning insert Core specifications Plate form: Rhombus 55° Plate size: 15 Plate thickness: 06 Corner radius: 1.2 Relief angle: 0° (negative) Special features Coating: Tiger‑tec Silver Grade: WMP20S (coated cemented carbide) Chipbreaker: HU5 Series: Tiger‑tec Silver Application: stainless steel FAQ What materials is this insert intended for? The DNMM150612‑HU5 WMP20S turning insert is specified for stainless steel machining and is optimised for the toughness and thermal behaviour of those alloys. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker on the DNMM150612‑HU5 WMP20S controls chip shape and evacuation, reducing the chance of built‑up edge and improving surface finish during turning operations in stainless steels. Is the insert compatible with standard toolholders? Yes, the rhombus 55° form and ISO designation are compatible with common indexable turning holders designed for this insert family. What benefit does Tiger‑tec Silver bring to production runs? The Tiger‑tec Silver coating increases wear resistance and thermal stability, extending tool life and improving process reliability over longer runs. Can this insert be used for finishing and semi‑finishing? The combination of the 55° geometry, 1.2 mm corner radius and negative rake makes the insert suitable for finishing and semi‑finishing passes in stainless steel components. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; www.walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation with our company. The offered article is original, brand‑new merchandise from the manufacturer.
DNMM150612-HU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G grade for high wear resistance and consistent performance in steel turning; the rhombic 55° geometry with a 1.2 mm corner radius and HU5 chipbreaker ensures stable cutting and reliable chip control. Order directly via Metav Werkzeuge or consult our specialists for process recommendations. DNMM150612-HU5 WPP20G Turning Insert (Rhombus 55°, Tiger·tec Gold) — Walter Tools The DNMM150612-HU5 WPP20G is a rhombic 55° indexable turning insert with Tiger·tec Gold coating, designed for productive and reliable machining of steel components. Tiger·tec Gold coating for steel Rhombic 55° geometry for versatile turning Negative 0° clearance for stable cutting Corner radius 1.2 mm for durable edge Longer cutting intervals and predictable productivity through advanced coating The combination of Tiger·tec Gold technology and the WPP20G carbide grade delivers improved wear resistance and thermal stability during turning. Coated carbide minimises flank and crater wear, which translates into longer tool life and fewer tool changes under continuous production. For shops aiming to increase uptime, this results in a measurable gain in throughput: fewer interruptions and more consistent part quality when machining ISO group P (steel) materials. Secure chip control and stable cutting for consistent surface quality Equipped with the HU5 chipbreaker and a negative 0° clearance, this insert promotes controlled chip formation and reduces vibrations in medium to heavy turning operations. The rhombic 55° shape provides good approach angles for a variety of turning tasks, while the corner radius 1.2 mm creates a tougher cutting edge that tolerates intermittent cuts and modest interruptions. In practice, this means predictable chip flow, improved surface finish and reduced risk of built-up edge during steel machining. Easy integration into production workflows and consistent dimensions The insert is produced to tolerance class M, making it compatible with standard toolholders for its form and ISO designation DNMM150612-HU5 WPP20G. The clearly defined geometry and repeatable edge preparation support process reproducibility and simplify tool inventory planning. Combined with Walter Tools' quality standards, the insert supports stable cycle times and repeatable part accuracy, helping to maintain efficient machining processes across batches. Contact Metav Werkzeuge to discuss process parameters for this Walter Tools turning insert and to receive tailored recommendations for turning steel. Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical Data SKU: DNMM150612-HU5-WPP20G-WALTER Label: Drehwendeschneidplatte DNMM150612-HU5 WPP20G Walter Tools Manufacturer: Walter Tools Core data Tolerance class: M Free angle: 0° (negativ) Corner radius: 1,2 Plate size: 15 Plate thickness: 06 Special features Series: Tiger-tec Gold Grade: WPP20G Chipbreaker: HU5 Plate form: Rhombus 55° Material group: P (steel) Execution: M ISO designation: DNMM150612-HU5 WPP20G FAQ Which materials is this insert intended for? The insert is designed for machining steel (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip behaviour typical of steel. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and thermal stability, so the WPP20G insert maintains cutting performance longer and supports higher productivity in steel turning. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of entangled chips during turning. What does a negative 0° clearance mean for cutting? A negative 0° clearance provides a more rigid cutting edge and can reduce deflection under load, contributing to dimensional stability in medium-duty turning operations. Is the insert compatible with standard toolholders? Yes — the rhombic 55° form and ISO designation DNMM150612-HU5 WPP20G match common toolholder designs; tolerance class M ensures consistent fit and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
DNMM150616-HU3 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold coating and the wear-resistant WPP05G grade for consistent, high-performance turning in steel; the combination of robust HU3 chip control and a 55° rhombic geometry supports efficient chip evacuation and stable cutting forces. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMM150616-HU3 WPP05G Indexable turning insert by Walter Tools — Tiger·tec Gold, for steel machining DNMM150616-HU3 WPP05G is a precision indexable turning insert designed for productive steel machining in industrial turning applications Tiger·tec Gold coating for extended tool life WPP05G grade optimised for steel machining HU3 chipbreaker for controlled chip formation Rhombus 55° geometry for versatile turning Consistent performance for steel machining The coated carbide specification and the WPP05G grade deliver predictable cutting behaviour when machining steel. The insert’s combination of a wear-resistant coating and a carbide substrate reduces flank wear and extends tool life, which translates into fewer tool changes and less production downtime. The negative 0° relief and rhombic 55° shape provide a stable cutting edge, supporting reliable process windows in both roughing and finishing operations. These design choices make the insert particularly suitable where repeatable dimensional accuracy and consistent surface quality are essential. Efficient chip control and process stability A dedicated HU3 chipbreaker promotes effective chip segmentation and evacuation, decreasing the risk of built-up edge and improving surface finish. The medium corner radius 1.6 mm supports a good balance between strength and cutting geometry, helping to absorb cutting forces and maintain edge integrity under higher feed rates. As a result, the insert contributes to process reliability by reducing the likelihood of unexpected interruptions and by enabling longer uninterrupted cycles on lathes and turning centres. Practical geometry for versatile turning tasks The rhombic 55° form offers flexibility across common turning profiles, allowing the insert to be used in face, external and light profiling operations. The plate size 15 and plate thickness 06 are typical for compact indexable tooling systems, enabling integration into standard toolholders without compromise. Engineers will appreciate that these geometrical choices support controlled chip flow and stable cutting conditions, which in turn allow predictable cycle times and consistent component quality. Designed for productivity and predictable outcomes Belonging to the Tiger·tec Gold series, the insert is formulated to cover a broad spectrum of steel grades and machining scenarios. The combination of coating technology and substrate composition aims to deliver both wear resistance and fracture toughness, helping to maintain cutting-edge integrity in mixed-production environments. This makes the insert a pragmatic choice where reliable repeatability and reduced tooling overhead are priorities. Contact Metav Werkzeuge for tailored application advice or to request the Walter Tools DNMM150616-HU3 WPP05G insert for optimised steel turning operations Technical Data SKU: DNMM150616-HU3-WPP05G-WALTER Article designation: DNMM150616-HU3 WPP05G Type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Insert size: 15 Corner radius: 1.6 Relief angle: 0° (negative) Plate thickness: 06 Plate form: Rhombus 55° Special features Coating: Tiger·tec Gold Grade: WPP05G Chipbreaker: HU3 Tolerance class: M Material application: Steel (P) FAQ What materials is this insert designed for? The DNMM150616-HU3 WPP05G insert by Walter Tools is engineered primarily for machining steel (ISO group P), combining a coating and substrate suited to the thermal and chip-forming characteristics of steels. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on this Walter Tools insert improves chip segmentation and evacuation, which leads to steadier cutting forces and reduced risk of built-up edge during continuous turning operations. Is the insert suitable for both roughing and finishing? Yes, the insert’s rhombus 55° geometry and 1.6 corner radius provide a compromise between edge strength and form accuracy, making it suitable for a range of turning tasks from roughing to light finishing. What advantages does Tiger·tec Gold provide? Tiger·tec Gold coating enhances wear resistance and supports consistent tool life under varying cutting conditions, contributing to predictable productivity in steel turning applications. Which tolerance class does the insert conform to? The insert is supplied in tolerance class M, ensuring dimensional consistency for precise seating and repeatable tool positioning. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
DNMM150616-HU3 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the wear-resistant WPP10G grade for reliable steel turning and steady chip control; the rhombic 55° geometry with a 0° negative rake and 1.6 mm corner radius ensures consistent edge life and repeatable component quality. Order directly via Metav Werkzeuge or consult our specialists for application advice. DNMM150616-HU3 WPP10G indexable turning insert — Tiger·tec Gold, steel application, 1.6 mm corner radius (Walter Tools) The DNMM150616-HU3 WPP10G is an indexable turning insert in rhombic 55° format designed for productive machining of steel, combining a coated carbide grade with an HU3 chipbreaker for controlled chip formation. Tiger·tec Gold coated carbide WPP10G Optimised for steel (ISO group P) Rhombic 55° geometry, 0° negative rake 1.6 mm corner radius, HU3 chipbreaker Consistent cutting performance that shortens cycle times The Tiger·tec Gold coating and WPP10G grade deliver a balance of wear resistance and toughness tailored for steel machining. This combination reduces flank and crater wear under typical turning temperatures, which in practice means longer cutting intervals and fewer index changes. The coated carbide substrate maintains a stable cutting edge during medium to high cutting speeds, supporting higher productivity without compromising component quality. Predictable chip control and surface quality Equipped with the HU3 chipbreaker and a rhombic 55° geometry, the insert produces manageable chips during longitudinal and profile turning of steel (ISO group P). The 0° negative rake provides stable cutting forces and reduces the risk of insert fracturing when interrupted cuts occur. As a result, cycle reliability improves and finishing passes can achieve consistent surface integrity with fewer reworks. Robust edge design for repeatable tool life The 1.6 mm corner radius contributes to a durable cutting edge that distributes cutting loads and resists chipping in batch and continuous operations. Combined with the insert’s tolerance class M, the design supports repeatable positioning and dependable seating in standard toolholders, which aids process stability and reduces tool-change downtime. Application clarity for straightforward selection This insert is explicitly specified for machining steel (ISO group P) and is best applied in general turning, roughing and medium finishing operations where a compromise of wear resistance and toughness is required. The DNMM150616-HU3 designation identifies its shape and chipbreaker; matching the insert to appropriate feed and speed windows will yield the intended balance of productivity and edge life. Contact Metav Werkzeuge for tailored cutting data, application recommendations and to discuss Walter Tools Tiger·tec Gold inserts for steel machining — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: DNMM150616-HU3-WPP10G-WALTER ISO designation: DNMM150616-HU3 WPP10G Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Core specifications Geometry: Rhombus 55° Free rake: 0° (negative) Corner radius: 1.6 mm Size: 15 Thickness: 06 Tolerance class: M Special features Coating: Tiger·tec Gold coated carbide (WPP10G) Chipbreaker: HU3 Material application: Steel (ISO group P) Execution: M FAQ What materials is this insert suitable for? The DNMM150616-HU3 WPP10G insert is specified for machining steel (ISO group P), where the WPP10G grade and Tiger·tec Gold coating manage typical heat and chip formation. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker promotes controlled chip formation during turning operations, improving process safety and surface finish when using the DNMM150616-HU3 WPP10G in steel applications. What advantage does the 0° negative rake provide? A 0° negative rake enhances edge strength and stability under interrupted cuts and heavier depths of cut, giving the Walter Tools insert robust performance in demanding operations. Is the insert suitable for finishing passes? Yes; while optimised for productive turning, the coated grade and geometry can achieve consistent surface quality in medium finishing when cuts and feeds are adjusted accordingly. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating increases wear resistance while preserving edge toughness, resulting in longer tool life and more predictable change intervals for the DNMM150616-HU3 WPP10G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
DNMM150616-HU3 WPP20G HU3 Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating and the WPP20G grade for reliable wear resistance and consistent chip control in steel turning operations; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. DNMM150616-HU3 WPP20G — Turning insert (Rhombic 55°, 0° negative rake) by Walter Tools A DNMM150616-HU3 WPP20G turning insert designed for productive steel machining, combining Tiger·tec Gold coated carbide with an HU3 chipbreaker for controlled chip formation. Tiger·tec Gold coated grade WPP20G Optimised HU3 chipbreaker for steel Rhombic 55° geometry, 1.6 mm nose radius 0° negative rake for stable cutting Enhanced process reliability through advanced coating and grade The Tiger·tec Gold technology in combination with the WPP20G grade delivers improved wear resistance and a consistently sharp cutting edge under the thermal and mechanical demands of steel machining. Because the grade is tailored for steels (material group P according to ISO classifications), the insert sustains higher cutting durations and reduces unexpected tool changes, which supports steady cycle times and fewer production interruptions. Better chip control for consistent surface quality The HU3 chipbreaker is optimised for the cutting behaviour of steel, promoting predictable chip formation and evacuation. Predictable chips reduce the risk of built-up edge and minimise rework, which in turn improves the surface finish on turned components. The combined effect of the chipbreaker and coating helps achieve repeatable part quality during continuous production runs. Geometry designed for robustness and versatility The rhombic 55° shape with a 1.6 mm nose radius and 0° negative rake provides a robust cutting edge that tolerates interrupted cuts and heavier engagement. This geometry supports stable cutting forces and helps maintain dimensional accuracy on workpieces that require reliable contouring or shoulder cutting. The insert format and geometry make it suitable for a wide range of turning tasks in industrial workshops. Practical application notes and integration into the process Plate thickness designation 06, the ISO-style identification and the ISO 513 reference to steel machining convey that the insert is intended for conventional turning of unalloyed and alloyed steels. For selection, match the DNMM150616 format to compatible tool holders and apply cutting parameters consistent with coated carbide recommendations for steel. For technical clarification on speeds, feeds and suitable holders, Metav Werkzeuge provides application support and material-specific guidance. For reliable steel turning with Tiger·tec Gold technology and the WPP20G grade, contact Metav Werkzeuge for tailored application advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: DNMM150616-HU3-WPP20G-WALTER Designation: DNMM150616-HU3 WPP20G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts / Core technical data Plate size: 15 Plate thickness: 06 Nose radius: 1.6 Relief angle: 0° (negativ) Chipbreaker: HU3 Special features / Versions Series: Tiger-tec Gold Grade: WPP20G Plate form: Rhombus 55° Tolerance class: M Execution: M Material group: P (steel) FAQ Which materials is this insert suitable for? The DNMM150616-HU3 WPP20G insert from Walter Tools is intended for machining steels (material group P), designed to handle the heat and chip formation typical for unalloyed and alloyed steels. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP20G grade provides enhanced wear resistance and edge stability, extending tool life and maintaining cutting performance during extended turning operations. When is a 0° negative rake recommended? A 0° negative rake is recommended where a strong cutting edge is needed—such as interrupted cuts or heavier depths of cut—because it increases edge robustness and process stability. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker is optimised for steel and encourages short, controllable chips, which improves chip evacuation and reduces the risk of built-up edge, leading to more consistent surface quality. Does the insert fit standard DNMM holders? The DNMM150616-HU3 format corresponds to the DNMM-style indexable insert geometry; compatibility depends on the specific tool holder design, so matching the insert designation to the holder specification is advised. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com